[svn-r27835] Description:

    Sync w/trunk.

Tested on:
    MacOSX/64 10.10.5 (amazon) w/serial & parallel
    (h5committest not required on this branch)

608 files changed, 13302 insertions, 101535 deletions

diff --git a/BRANCH.txt b/BRANCH.txt
new file mode 100644
index 0000000..2cbc975
--- /dev/null
+++ b/BRANCH.txt
@@ -0,0 +1,15 @@
+autotools_rework
+
+The purpose of this branch is to make changes to the autotools files,
+particularly configure.ac. This will remove a lot of old cruft and update
+the input files. This effort was started in January 2015 and should be
+completed within the year.
+
+This branch tracks the trunk.
+
+Dana Robinson and Allen Byrne are the owners of this branch.
+
+This branch should be closed when the bulk of the autotools work is
+complete and has been merged into the trunk and 1.8 branch. This
+work should be completed by mid-2015.
+
diff --git a/MANIFEST b/MANIFEST
index 21186ed..eef2b5a 100644
--- a/MANIFEST
+++ b/MANIFEST
@@ -27,22 +27,16 @@
 ./MANIFEST
 ./Makefile.dist
 ./Makefile.am
-./Makefile.in
-./m4/ltsugar.m4                         _DO_NOT_DISTRIBUTE_
-./m4/libtool.m4                         _DO_NOT_DISTRIBUTE_
-./m4/ltversion.m4                       _DO_NOT_DISTRIBUTE_
-./m4/lt~obsolete.m4                     _DO_NOT_DISTRIBUTE_
-./m4/ltoptions.m4                       _DO_NOT_DISTRIBUTE_
-./m4/aclocal_cxx.m4
 ./m4/aclocal_fc.m4
+./m4/aclocal_cxx.m4
 ./README.txt
-./aclocal.m4
+./BRANCH.txt
 ./acsite.m4
-./configure
+./autogen.sh           _DO_NOT_DISTRIBUTE_
 ./configure.ac
 
 ./bin/COPYING
-./bin/bbrelease       _DO_NOT_DISTRIBUTE_
+./bin/bbrelease         _DO_NOT_DISTRIBUTE_
 ./bin/buildhdf5
 ./bin/checkapi        _DO_NOT_DISTRIBUTE_
 ./bin/checkposix      _DO_NOT_DISTRIBUTE_
@@ -50,38 +44,27 @@
 ./bin/chkcopyright      _DO_NOT_DISTRIBUTE_
 ./bin/chkmanifest
 ./bin/cmakehdf5
-./bin/compile
-./bin/config.guess
-./bin/config.sub
 ./bin/debug-ohdr      _DO_NOT_DISTRIBUTE_
 ./bin/dependencies
-./bin/depcomp
 ./bin/deploy
 ./bin/distdep
 ./bin/errors              _DO_NOT_DISTRIBUTE_
-./bin/genltanalyze      _DO_NOT_DISTRIBUTE_
 ./bin/gcov_script            _DO_NOT_DISTRIBUTE_
 ./bin/h5vers
-./bin/install-sh
 ./bin/iostats
 ./bin/locate_sw
-./bin/ltmain.sh
 ./bin/make_err
 ./bin/make_overflow
 ./bin/make_vers
 ./bin/makehelp
-./bin/missing
 ./bin/mkdirs
-./bin/mkinstalldirs
 ./bin/newer
-./bin/reconfigure      _DO_NOT_DISTRIBUTE_
 ./bin/output_filter.sh
 ./bin/README        _DO_NOT_DISTRIBUTE_
 ./bin/release
 ./bin/runtest        _DO_NOT_DISTRIBUTE_
 ./bin/snapshot
 ./bin/snapshot_version      _DO_NOT_DISTRIBUTE_
-./bin/test-driver
 ./bin/timekeeper      _DO_NOT_DISTRIBUTE_
 ./bin/trace
 ./bin/yodconfigure
@@ -119,7 +102,6 @@
 
 ./examples/Attributes.txt
 ./examples/Makefile.am
-./examples/Makefile.in
 ./examples/h5_chunk_read.c
 ./examples/h5_compound.c
 ./examples/h5_crtgrpd.c
@@ -167,12 +149,9 @@
 
 ./fortran/COPYING
 ./fortran/Makefile.am
-./fortran/Makefile.in
-
 ./fortran/robodoc.rc
 
 ./fortran/examples/Makefile.am
-./fortran/examples/Makefile.in
 ./fortran/examples/compound.f90
 ./fortran/examples/compound_fortran2003.f90
 ./fortran/examples/compound_complex_fortran2003.f90
@@ -182,7 +161,9 @@
 ./fortran/examples/h5_crtgrp.f90
 ./fortran/examples/h5_crtgrpar.f90
 ./fortran/examples/h5_crtgrpd.f90
+./hl/fortran/examples/exlite.f90
 ./fortran/examples/h5_extend.f90
+./hl/fortran/examples/ex_ds1.f90
 ./fortran/examples/h5_rdwt.f90
 ./fortran/examples/h5_subset.f90
 ./fortran/examples/hyperslab.f90
@@ -196,6 +177,7 @@
 ./fortran/examples/nested_derived_type.f90
 ./fortran/examples/rwdset_fortran2003.f90
 
+./fortran/src/H5_buildiface.F90
 ./fortran/src/H5_f.c
 ./fortran/src/H5_ff.F90
 ./fortran/src/H5Af.c
@@ -224,32 +206,29 @@
 ./fortran/src/H5Tff.F90
 ./fortran/src/H5Zf.c
 ./fortran/src/H5Zff.F90
+./fortran/src/H5config_f.inc.cmake
+./fortran/src/H5config_f.inc.in
+./fortran/src/H5fort_type_defines.h.in
 ./fortran/src/H5f90.h
 ./fortran/src/H5f90global.F90
 ./fortran/src/H5f90i.h
 ./fortran/src/H5f90kit.c
 ./fortran/src/H5f90proto.h
-./fortran/src/H5_buildiface.F90
 ./fortran/src/H5match_types.c
 ./fortran/src/HDF5.F90
-./fortran/src/H5config_f.inc.in
-./fortran/src/H5config_f.inc.cmake
-./fortran/src/H5fort_type_defines.h.in
 ./fortran/src/Makefile.am
-./fortran/src/Makefile.in
 ./fortran/src/README
 ./fortran/src/README_DEVELOPEMENT   _DO_NOT_DISTRIBUTE_
 ./fortran/src/h5fc.in
 ./fortran/src/hdf5_fortrandll.def.in
 
+
 ./fortran/test/Makefile.am
-./fortran/test/Makefile.in
 ./fortran/test/fflush1.F90
 ./fortran/test/fflush2.F90
 ./fortran/test/fortranlib_test.F90
 ./fortran/test/fortranlib_test_1_8.F90
 ./fortran/test/fortranlib_test_F03.F90
-./fortran/test/H5_test_buildiface.F90
 ./fortran/test/t.c
 ./fortran/test/t.h
 ./fortran/test/tf.F90
@@ -279,9 +258,9 @@
 ./fortran/test/tHDF5_1_8.F90
 ./fortran/test/tHDF5_F03.F90
 ./fortran/test/tHDF5.F90
+./fortran/test/H5_test_buildiface.F90
 
 ./fortran/testpar/Makefile.am
-./fortran/testpar/Makefile.in
 ./fortran/testpar/ptest.f90
 ./fortran/testpar/hyper.f90
 ./fortran/testpar/mdset.f90
@@ -300,7 +279,6 @@
 
 ./c++/COPYING
 ./c++/Makefile.am
-./c++/Makefile.in
 
 ./c++/examples/chunks.cpp
 ./c++/examples/compound.cpp
@@ -321,7 +299,6 @@
 ./c++/examples/testh5c++.sh.in
 ./c++/examples/writedata.cpp
 ./c++/examples/Makefile.am
-./c++/examples/Makefile.in
 ./c++/examples/run-c++-ex.sh.in
 
 ./c++/src/H5AbstractDs.cpp
@@ -384,11 +361,10 @@
 ./c++/src/H5VarLenType.cpp
 ./c++/src/H5VarLenType.h
 ./c++/src/Makefile.am
-./c++/src/Makefile.in
 ./c++/src/RM_stylesheet.css
 ./c++/src/cpp_doc_config
-./c++/src/footer.html
 ./c++/src/h5c++.in
+./c++/src/footer.html
 ./c++/src/header.html
 ./c++/src/header_files/filelist.xml
 ./c++/src/header_files/hdf_logo.jpg
@@ -398,7 +374,6 @@
 
 ./c++/test/H5srcdir_str.h.in
 ./c++/test/Makefile.am
-./c++/test/Makefile.in
 ./c++/test/dsets.cpp
 ./c++/test/h5cpputil.cpp
 ./c++/test/h5cpputil.h
@@ -444,28 +419,27 @@
 ./src/H5dbg.c
 ./src/H5api_adpt.h
 ./src/H5err.txt
-./src/H5config.h.in
 ./src/H5detect.c
 ./src/H5make_libsettings.c
 ./src/H5overflow.txt
-./src/H5overflow.h
 ./src/H5private.h
 ./src/H5public.h
 ./src/H5system.c
 ./src/H5timer.c
 ./src/H5trace.c
 ./src/H5vers.txt
-./src/H5version.h
 ./src/H5A.c
 ./src/H5Abtree2.c
 ./src/H5Adense.c
 ./src/H5Adeprec.c
 ./src/H5Aint.c
+./src/H5Amodule.h
 ./src/H5Atest.c
 ./src/H5Apkg.h
 ./src/H5Aprivate.h
 ./src/H5Apublic.h
 ./src/H5AC.c
+./src/H5ACmodule.h
 ./src/H5ACmpio.c
 ./src/H5ACpkg.h
 ./src/H5ACprivate.h
@@ -473,6 +447,7 @@
 ./src/H5B.c
 ./src/H5Bcache.c
 ./src/H5Bdbg.c
+./src/H5Bmodule.h
 ./src/H5Bpkg.h
 ./src/H5Bprivate.h
 ./src/H5Bpublic.h
@@ -481,12 +456,14 @@
 ./src/H5B2dbg.c
 ./src/H5B2hdr.c
 ./src/H5B2int.c
+./src/H5B2module.h
 ./src/H5B2pkg.h
 ./src/H5B2private.h
 ./src/H5B2public.h
 ./src/H5B2stat.c
 ./src/H5B2test.c
 ./src/H5C.c
+./src/H5Cmodule.h
 ./src/H5Cmpio.c
 ./src/H5Cpkg.h
 ./src/H5Cprivate.h
@@ -505,6 +482,7 @@
 ./src/H5Dint.c
 ./src/H5Dio.c
 ./src/H5Dlayout.c
+./src/H5Dmodule.h
 ./src/H5Dmpio.c
 ./src/H5Doh.c
 ./src/H5Dpkg.h
@@ -515,15 +493,12 @@
 ./src/H5Dtest.c
 ./src/H5Dvirtual.c
 ./src/H5E.c
-./src/H5Edefin.h
 ./src/H5Edeprec.c
-./src/H5Einit.h
 ./src/H5Eint.c
+./src/H5Emodule.h
 ./src/H5Epkg.h
 ./src/H5Eprivate.h
-./src/H5Epubgen.h
 ./src/H5Epublic.h
-./src/H5Eterm.h
 ./src/H5EA.c
 ./src/H5EAcache.c
 ./src/H5EAdbg.c
@@ -532,6 +507,7 @@
 ./src/H5EAhdr.c
 ./src/H5EAiblock.c
 ./src/H5EAint.c
+./src/H5EAmodule.h
 ./src/H5EApkg.h
 ./src/H5EAprivate.h
 ./src/H5EAsblock.c
@@ -546,6 +522,7 @@
 ./src/H5Ffake.c
 ./src/H5Fint.c
 ./src/H5Fio.c
+./src/H5Fmodule.h
 ./src/H5Fmount.c
 ./src/H5Fmpi.c
 ./src/H5Fquery.c
@@ -562,6 +539,7 @@
 ./src/H5FAdblkpage.c
 ./src/H5FAdblock.c
 ./src/H5FAhdr.c
+./src/H5FAmodule.h
 ./src/H5FApkg.h
 ./src/H5FAprivate.h
 ./src/H5FAstat.c
@@ -571,11 +549,13 @@
 ./src/H5FDcore.h
 ./src/H5FDdirect.c
 ./src/H5FDdirect.h
+./src/H5FDdrvr_module.h
 ./src/H5FDfamily.c
 ./src/H5FDfamily.h
 ./src/H5FDint.c
 ./src/H5FDlog.c
 ./src/H5FDlog.h
+./src/H5FDmodule.h
 ./src/H5FDmpi.c
 ./src/H5FDmpi.h
 ./src/H5FDmpio.c
@@ -593,12 +573,14 @@
 ./src/H5FDwindows.c
 ./src/H5FDwindows.h
 ./src/H5FL.c
+./src/H5FLmodule.h
 ./src/H5FLprivate.h
 ./src/H5FO.c
 ./src/H5FOprivate.h
 ./src/H5FS.c
 ./src/H5FScache.c
 ./src/H5FSdbg.c
+./src/H5FSmodule.h
 ./src/H5FStest.c
 ./src/H5FSstat.c
 ./src/H5FSpkg.h
@@ -615,6 +597,7 @@
 ./src/H5Gint.c
 ./src/H5Glink.c
 ./src/H5Gloc.c
+./src/H5Gmodule.h
 ./src/H5Gname.c
 ./src/H5Gnode.c
 ./src/H5Gobj.c
@@ -637,6 +620,7 @@
 ./src/H5HFiblock.c
 ./src/H5HFiter.c
 ./src/H5HFman.c
+./src/H5HFmodule.h
 ./src/H5HFpkg.h
 ./src/H5HFprivate.h
 ./src/H5HFpublic.h
@@ -648,6 +632,7 @@
 ./src/H5HG.c
 ./src/H5HGcache.c
 ./src/H5HGdbg.c
+./src/H5HGmodule.h
 ./src/H5HGpkg.h
 ./src/H5HGprivate.h
 ./src/H5HGpublic.h
@@ -656,24 +641,28 @@
 ./src/H5HLcache.c
 ./src/H5HLdbg.c
 ./src/H5HLint.c
+./src/H5HLmodule.h
 ./src/H5HLpkg.h
 ./src/H5HLprivate.h
 ./src/H5HLpublic.h
 ./src/H5HP.c
 ./src/H5HPprivate.h
 ./src/H5I.c
+./src/H5Imodule.h
 ./src/H5Ipkg.h
 ./src/H5Iprivate.h
 ./src/H5Ipublic.h
 ./src/H5Itest.c
 ./src/H5L.c
 ./src/H5Lexternal.c
+./src/H5Lmodule.h
 ./src/H5Lpkg.h
 ./src/H5Lprivate.h
 ./src/H5Lpublic.h
 ./src/H5MF.c
 ./src/H5MFaggr.c
 ./src/H5MFdbg.c
+./src/H5MFmodule.h
 ./src/H5MFsection.c
 ./src/H5MFpkg.h
 ./src/H5MFprivate.h
@@ -681,6 +670,7 @@
 ./src/H5MMprivate.h
 ./src/H5MMpublic.h
 ./src/H5MP.c
+./src/H5MPmodule.h
 ./src/H5MPpkg.h
 ./src/H5MPprivate.h
 ./src/H5MPtest.c
@@ -706,6 +696,7 @@
 ./src/H5Olinfo.c
 ./src/H5Olink.c
 ./src/H5Omessage.c
+./src/H5Omodule.h
 ./src/H5Omtime.c
 ./src/H5Oname.c
 ./src/H5Onull.c
@@ -735,6 +726,7 @@
 ./src/H5Pint.c
 ./src/H5Plapl.c
 ./src/H5Plcpl.c
+./src/H5Pmodule.h
 ./src/H5Pocpl.c
 ./src/H5Pocpypl.c
 ./src/H5Ppkg.h
@@ -743,11 +735,13 @@
 ./src/H5Pstrcpl.c
 ./src/H5Ptest.c
 ./src/H5PL.c
+./src/H5PLmodule.h
 ./src/H5PLprivate.h
 ./src/H5PLpublic.h
 ./src/H5PLextern.h
 ./src/H5R.c
 ./src/H5Rdeprec.c
+./src/H5Rmodule.h
 ./src/H5Rpkg.h
 ./src/H5Rprivate.h
 ./src/H5Rpublic.h
@@ -759,6 +753,7 @@
 ./src/H5Sall.c
 ./src/H5Sdbg.c
 ./src/H5Shyper.c
+./src/H5Smodule.h
 ./src/H5Smpio.c
 ./src/H5Snone.c
 ./src/H5Spkg.h
@@ -768,11 +763,13 @@
 ./src/H5Sselect.c
 ./src/H5Stest.c
 ./src/H5SL.c
+./src/H5SLmodule.h
 ./src/H5SLprivate.h
 ./src/H5SM.c
 ./src/H5SMbtree2.c
 ./src/H5SMcache.c
 ./src/H5SMmessage.c
+./src/H5SMmodule.h
 ./src/H5SMpkg.h
 ./src/H5SMprivate.h
 ./src/H5SMtest.c
@@ -791,6 +788,7 @@
 ./src/H5Tfields.c
 ./src/H5Tfixed.c
 ./src/H5Tfloat.c
+./src/H5Tmodule.h
 ./src/H5Tnative.c
 ./src/H5Toffset.c
 ./src/H5Topaque.c
@@ -813,6 +811,7 @@
 ./src/H5Z.c
 ./src/H5Zdeflate.c
 ./src/H5Zfletcher32.c
+./src/H5Zmodule.h
 ./src/H5Znbit.c
 ./src/H5Zpkg.h
 ./src/H5Zprivate.h
@@ -822,7 +821,6 @@
 ./src/H5Zszip.c
 ./src/H5Ztrans.c
 ./src/Makefile.am
-./src/Makefile.in
 ./src/hdf5.h
 ./src/libhdf5.settings.in
 ./src/H5win32defs.h
@@ -831,7 +829,6 @@
 ./test/H5srcdir.h
 ./test/H5srcdir_str.h.in
 ./test/Makefile.am
-./test/Makefile.in
 ./test/accum.c
 ./test/app_ref.c
 ./test/bad_compound.h5
@@ -861,7 +858,7 @@
 ./test/earray.c
 ./test/efc.c
 ./test/enc_dec_plist.c
-./test/enc_dec_plist_with_endianess.c
+./test/enc_dec_plist_cross_platform.c
 ./test/enum.c
 ./test/extend.c
 ./test/external.c
@@ -1001,34 +998,105 @@
 ./test/testfiles/error_test_1
 ./test/testfiles/error_test_2
 ./test/testfiles/links_env.out
-./test/testfiles/plist_files/acpl_be
-./test/testfiles/plist_files/acpl_le
-./test/testfiles/plist_files/dapl_be
-./test/testfiles/plist_files/dapl_le
-./test/testfiles/plist_files/dcpl_be
-./test/testfiles/plist_files/dcpl_le
-./test/testfiles/plist_files/dxpl_be
-./test/testfiles/plist_files/dxpl_le
-./test/testfiles/plist_files/fapl_be
-./test/testfiles/plist_files/fapl_le
-./test/testfiles/plist_files/fcpl_be
-./test/testfiles/plist_files/fcpl_le
-./test/testfiles/plist_files/gcpl_be
-./test/testfiles/plist_files/gcpl_le
-./test/testfiles/plist_files/lapl_be
-./test/testfiles/plist_files/lapl_le
-./test/testfiles/plist_files/lcpl_be
-./test/testfiles/plist_files/lcpl_le
-./test/testfiles/plist_files/ocpl_be
-./test/testfiles/plist_files/ocpl_le
-./test/testfiles/plist_files/ocpypl_be
-./test/testfiles/plist_files/ocpypl_le
-./test/testfiles/plist_files/strcpl_be
-./test/testfiles/plist_files/strcpl_le
+./test/testfiles/plist_files/acpl_32be
+./test/testfiles/plist_files/acpl_32le
+./test/testfiles/plist_files/acpl_64be
+./test/testfiles/plist_files/acpl_64le
+./test/testfiles/plist_files/dapl_32be
+./test/testfiles/plist_files/dapl_32le
+./test/testfiles/plist_files/dapl_64be
+./test/testfiles/plist_files/dapl_64le
+./test/testfiles/plist_files/dcpl_32be
+./test/testfiles/plist_files/dcpl_32le
+./test/testfiles/plist_files/dcpl_64be
+./test/testfiles/plist_files/dcpl_64le
+./test/testfiles/plist_files/def_acpl_32be
+./test/testfiles/plist_files/def_acpl_32le
+./test/testfiles/plist_files/def_acpl_64be
+./test/testfiles/plist_files/def_acpl_64le
+./test/testfiles/plist_files/def_dapl_32be
+./test/testfiles/plist_files/def_dapl_32le
+./test/testfiles/plist_files/def_dapl_64be
+./test/testfiles/plist_files/def_dapl_64le
+./test/testfiles/plist_files/def_dcpl_32be
+./test/testfiles/plist_files/def_dcpl_32le
+./test/testfiles/plist_files/def_dcpl_64be
+./test/testfiles/plist_files/def_dcpl_64le
+./test/testfiles/plist_files/def_dxpl_32be
+./test/testfiles/plist_files/def_dxpl_32le
+./test/testfiles/plist_files/def_dxpl_64be
+./test/testfiles/plist_files/def_dxpl_64le
+./test/testfiles/plist_files/def_fapl_32be
+./test/testfiles/plist_files/def_fapl_32le
+./test/testfiles/plist_files/def_fapl_64be
+./test/testfiles/plist_files/def_fapl_64le
+./test/testfiles/plist_files/def_fcpl_32be
+./test/testfiles/plist_files/def_fcpl_32le
+./test/testfiles/plist_files/def_fcpl_64be
+./test/testfiles/plist_files/def_fcpl_64le
+./test/testfiles/plist_files/def_gcpl_32be
+./test/testfiles/plist_files/def_gcpl_32le
+./test/testfiles/plist_files/def_gcpl_64be
+./test/testfiles/plist_files/def_gcpl_64le
+./test/testfiles/plist_files/def_lapl_32be
+./test/testfiles/plist_files/def_lapl_32le
+./test/testfiles/plist_files/def_lapl_64be
+./test/testfiles/plist_files/def_lapl_64le
+./test/testfiles/plist_files/def_lcpl_32be
+./test/testfiles/plist_files/def_lcpl_32le
+./test/testfiles/plist_files/def_lcpl_64be
+./test/testfiles/plist_files/def_lcpl_64le
+./test/testfiles/plist_files/def_ocpl_32be
+./test/testfiles/plist_files/def_ocpl_32le
+./test/testfiles/plist_files/def_ocpl_64be
+./test/testfiles/plist_files/def_ocpl_64le
+./test/testfiles/plist_files/def_ocpypl_32be
+./test/testfiles/plist_files/def_ocpypl_32le
+./test/testfiles/plist_files/def_ocpypl_64be
+./test/testfiles/plist_files/def_ocpypl_64le
+./test/testfiles/plist_files/def_strcpl_32be
+./test/testfiles/plist_files/def_strcpl_32le
+./test/testfiles/plist_files/def_strcpl_64be
+./test/testfiles/plist_files/def_strcpl_64le
+./test/testfiles/plist_files/dxpl_32be
+./test/testfiles/plist_files/dxpl_32le
+./test/testfiles/plist_files/dxpl_64be
+./test/testfiles/plist_files/dxpl_64le
+./test/testfiles/plist_files/fapl_32be
+./test/testfiles/plist_files/fapl_32le
+./test/testfiles/plist_files/fapl_64be
+./test/testfiles/plist_files/fapl_64le
+./test/testfiles/plist_files/fcpl_32be
+./test/testfiles/plist_files/fcpl_32le
+./test/testfiles/plist_files/fcpl_64be
+./test/testfiles/plist_files/fcpl_64le
+./test/testfiles/plist_files/gcpl_32be
+./test/testfiles/plist_files/gcpl_32le
+./test/testfiles/plist_files/gcpl_64be
+./test/testfiles/plist_files/gcpl_64le
+./test/testfiles/plist_files/lapl_32be
+./test/testfiles/plist_files/lapl_32le
+./test/testfiles/plist_files/lapl_64be
+./test/testfiles/plist_files/lapl_64le
+./test/testfiles/plist_files/lcpl_32be
+./test/testfiles/plist_files/lcpl_32le
+./test/testfiles/plist_files/lcpl_64be
+./test/testfiles/plist_files/lcpl_64le
+./test/testfiles/plist_files/ocpl_32be
+./test/testfiles/plist_files/ocpl_32le
+./test/testfiles/plist_files/ocpl_64be
+./test/testfiles/plist_files/ocpl_64le
+./test/testfiles/plist_files/ocpypl_32be
+./test/testfiles/plist_files/ocpypl_32le
+./test/testfiles/plist_files/ocpypl_64be
+./test/testfiles/plist_files/ocpypl_64le
+./test/testfiles/plist_files/strcpl_32be
+./test/testfiles/plist_files/strcpl_32le
+./test/testfiles/plist_files/strcpl_64be
+./test/testfiles/plist_files/strcpl_64le
 
 ./testpar/COPYING
 ./testpar/Makefile.am
-./testpar/Makefile.in
 ./testpar/t_cache.c
 ./testpar/t_chunk_alloc.c
 ./testpar/t_coll_chunk.c
@@ -1053,10 +1121,8 @@
 
 ./tools/COPYING
 ./tools/Makefile.am
-./tools/Makefile.in
 
 ./tools/h5dump/Makefile.am
-./tools/h5dump/Makefile.in
 ./tools/h5dump/h5dump.c
 ./tools/h5dump/h5dump.h
 ./tools/h5dump/h5dump_defines.h
@@ -1073,7 +1139,6 @@
 ./tools/h5dump/binread.c
 
 ./tools/h5import/Makefile.am
-./tools/h5import/Makefile.in
 ./tools/h5import/h5import.h
 ./tools/h5import/h5import.c
 ./tools/h5import/h5importtest.c
@@ -1132,7 +1197,6 @@
 
 # h5diff sources
 ./tools/h5diff/Makefile.am
-./tools/h5diff/Makefile.in
 ./tools/h5diff/h5diff_common.c
 ./tools/h5diff/h5diff_common.h
 ./tools/h5diff/h5diff_main.c
@@ -1143,7 +1207,6 @@
 
 # h5repack sources
 ./tools/h5repack/Makefile.am
-./tools/h5repack/Makefile.in
 ./tools/h5repack/dynlib_rpk.c
 ./tools/h5repack/h5repack.sh.in
 ./tools/h5repack/h5repack_plugin.sh.in
@@ -1162,21 +1225,18 @@
 # h5ls sources
 ./tools/h5ls/CMakeTestsVDS.cmake
 ./tools/h5ls/Makefile.am
-./tools/h5ls/Makefile.in
 ./tools/h5ls/h5ls.c
 ./tools/h5ls/testh5ls.sh.in
 ./tools/h5ls/testh5lsvds.sh.in
 
 # h5copy sources
 ./tools/h5copy/testh5copy.sh.in
-./tools/h5copy/Makefile.in
 ./tools/h5copy/h5copy.c
 ./tools/h5copy/h5copygentest.c
 ./tools/h5copy/Makefile.am
 
 
 ./tools/lib/Makefile.am
-./tools/lib/Makefile.in
 ./tools/lib/h5diff.c
 ./tools/lib/h5diff.h
 ./tools/lib/h5diff_array.c
@@ -1203,7 +1263,6 @@
 ./tools/lib/io_timer.h
 
 ./tools/misc/Makefile.am
-./tools/misc/Makefile.in
 ./tools/misc/h5cc.in
 ./tools/misc/h5debug.c
 ./tools/misc/h5mkgrp.c
@@ -1233,7 +1292,6 @@
 
 # h5stat sources
 ./tools/h5stat/Makefile.am
-./tools/h5stat/Makefile.in
 ./tools/h5stat/h5stat.c
 
 # h5stat test files
@@ -2130,7 +2188,6 @@
 ./tools/h5jam/h5jam.c
 ./tools/h5jam/h5unjam.c
 ./tools/h5jam/Makefile.am
-./tools/h5jam/Makefile.in
 ./tools/h5jam/h5jamgentest.c
 ./tools/h5jam/testh5jam.sh.in
 ./tools/h5jam/tellub.c
@@ -2174,7 +2231,6 @@
 
 ./tools/perform/COPYING
 ./tools/perform/Makefile.am
-./tools/perform/Makefile.in
 ./tools/perform/build_h5perf_alone.sh
 ./tools/perform/build_h5perf_serial_alone.sh
 ./tools/perform/chunk.c
@@ -2199,9 +2255,7 @@
 # high level libraries
 ./hl/COPYING
 ./hl/Makefile.am
-./hl/Makefile.in
 ./hl/examples/Makefile.am
-./hl/examples/Makefile.in
 ./hl/examples/ex_ds1.c
 ./hl/examples/ex_lite1.c
 ./hl/examples/ex_lite2.c
@@ -2228,7 +2282,6 @@
 ./hl/examples/run-hlc-ex.sh.in
 ./hl/src/COPYING
 ./hl/src/Makefile.am
-./hl/src/Makefile.in
 ./hl/src/H5DO.c
 ./hl/src/H5DOpublic.h
 ./hl/src/H5DS.c
@@ -2240,10 +2293,7 @@
 ./hl/src/H5IMpublic.h
 ./hl/src/H5LT.c
 ./hl/src/H5LTanalyze.l
-./hl/src/H5LTanalyze.c
 ./hl/src/H5LTparse.y
-./hl/src/H5LTparse.c
-./hl/src/H5LTparse.h
 ./hl/src/H5LTprivate.h
 ./hl/src/H5LTpublic.h
 ./hl/src/H5PT.c
@@ -2256,7 +2306,6 @@
 ./hl/test/COPYING
 ./hl/test/H5srcdir_str.h.in
 ./hl/test/Makefile.am
-./hl/test/Makefile.in
 ./hl/test/dsdata.txt
 ./hl/test/dslat.txt
 ./hl/test/dslon.txt
@@ -2288,9 +2337,7 @@
 # tools
 ./hl/tools/COPYING
 ./hl/tools/Makefile.am
-./hl/tools/Makefile.in
 ./hl/tools/gif2h5/Makefile.am
-./hl/tools/gif2h5/Makefile.in
 ./hl/tools/gif2h5/decompress.c
 ./hl/tools/gif2h5/gif.h
 ./hl/tools/gif2h5/gif2hdf.c
@@ -2309,29 +2356,23 @@
 # hl fortran
 ./hl/fortran/COPYING
 ./hl/fortran/Makefile.am
-./hl/fortran/Makefile.in
 ./hl/fortran/examples/Makefile.am
-./hl/fortran/examples/Makefile.in
-./hl/fortran/examples/ex_ds1.f90
-./hl/fortran/examples/exlite.f90
 ./hl/fortran/examples/run-hlfortran-ex.sh.in
 ./hl/fortran/src/hdf5_hl_fortrandll.def.in
 ./hl/fortran/src/H5DSfc.c
 ./hl/fortran/src/H5DSff.F90
+./hl/fortran/src/H5HL_buildiface.F90
 ./hl/fortran/src/H5IMcc.c
 ./hl/fortran/src/H5IMcc.h
 ./hl/fortran/src/H5IMfc.c
 ./hl/fortran/src/H5IMff.F90
-./hl/fortran/src/H5HL_buildiface.F90
 ./hl/fortran/src/H5LTf90proto.h
 ./hl/fortran/src/H5LTfc.c
 ./hl/fortran/src/H5LTff.F90
 ./hl/fortran/src/H5TBfc.c
 ./hl/fortran/src/H5TBff.F90
 ./hl/fortran/src/Makefile.am
-./hl/fortran/src/Makefile.in
 ./hl/fortran/test/Makefile.am
-./hl/fortran/test/Makefile.in
 ./hl/fortran/test/tstds.F90
 ./hl/fortran/test/tstimage.F90
 ./hl/fortran/test/tstlite.F90
@@ -2340,19 +2381,15 @@
 # hl c++
 ./hl/c++/COPYING
 ./hl/c++/Makefile.am
-./hl/c++/Makefile.in
 ./hl/c++/examples/Makefile.am
-./hl/c++/examples/Makefile.in
 ./hl/c++/examples/ptExampleFL.cpp
 ./hl/c++/examples/run-hlc++-ex.sh.in
 ./hl/c++/src/H5PacketTable.h
 ./hl/c++/src/H5PacketTable.cpp
 ./hl/c++/src/Makefile.am
-./hl/c++/src/Makefile.in
 ./hl/c++/test/ptableTest.h
 ./hl/c++/test/ptableTest.cpp
 ./hl/c++/test/Makefile.am
-./hl/c++/test/Makefile.in
 
 # CMake-specific Files
 ./config/cmake/cacheinit.cmake
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index 98fa5aa..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,1133 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-# 
-# This makefile mostly just reinvokes make in the various subdirectories
-# but does so in the correct order.  You can alternatively invoke make from
-# each subdirectory manually.
-#
-# Top-level HDF5 Makefile(.in)
-
-# pmake has issues if variables are undefined.  Solve this problem in
-# top-level Makefile by defining .MAKEFLAGS target to -V before pmake can
-# encounter any undefined variables.
-# Automake resists putting anything but variable definitions first in
-# a Makefile.in, so we'll put a placebo comment here and use sed in
-# bin/reconfigure to turn it into the .MAKEFLAGS target.  Sigh.  -JL 2005
-# Configure should set AM_MAKEFLAGS to -V to solve this problem in
-# subdirectories.
-# NOTE: This means that invoking pmake in a subdirectory will not work.
-.MAKEFLAGS:@AM_MAKEFLAGS@
-	$(MAKE) all
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/configure \
-	$(am__configure_deps) $(top_srcdir)/bin/mkinstalldirs COPYING \
-	bin/COPYING bin/README bin/compile bin/config.guess \
-	bin/config.sub bin/depcomp bin/install-sh bin/missing \
-	bin/mkinstalldirs bin/ltmain.sh $(top_srcdir)/bin/compile \
-	$(top_srcdir)/bin/config.guess $(top_srcdir)/bin/config.sub \
-	$(top_srcdir)/bin/install-sh $(top_srcdir)/bin/ltmain.sh \
-	$(top_srcdir)/bin/missing
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	cscope distdir dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Some files/directories generated during check that should be cleaned
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *-tmp
-@BUILD_PARALLEL_CONDITIONAL_FALSE@TESTPARALLEL_DIR = 
-
-# Define subdirectories to build.
-# Add this directory to SUBDIRS so that examples get built after tools
-# but before examples in extra interfaces (c++ and fortran).
-# Since we're explicitly listing DIST_SUBDIRS, we also need to list
-# directories that are only conditionally built (so that their Makefiles
-# are cleaned as well).
-# Note that `make clean' will not affect the examples or doc directories. 
-
-# Conditionals.  These conditionals are defined during configure
-# Define each variable to empty if it is not used to placate pmake
-@BUILD_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar
-@BUILD_CXX_CONDITIONAL_FALSE@CXX_DIR = 
-@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
-@BUILD_FORTRAN_CONDITIONAL_FALSE@FORTRAN_DIR = 
-@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
-@BUILD_HDF5_HL_CONDITIONAL_FALSE@HDF5_HL_DIR = 
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@HDF5_HL_DIR = hl
-SUBDIRS = src test $(TESTPARALLEL_DIR) tools . $(CXX_DIR) $(FORTRAN_DIR) \
-          $(HDF5_HL_DIR)
-
-DIST_SUBDIRS = src test testpar tools . c++ fortran hl examples
-
-# Some files generated during configure that should be cleaned
-DISTCLEANFILES = config/stamp1 config/stamp2
-all: all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
-	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am:
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool config.lt
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
-	test ! -s cscope.files \
-	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
-	-rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__post_remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
-
-dist-tarZ: distdir
-	@echo WARNING: "Support for shar distribution archives is" \
-	               "deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
-
-dist-shar: distdir
-	@echo WARNING: "Support for distribution archives compressed with" \
-		       "legacy program 'compress' is deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
-
-dist dist-all:
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir)
-	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	    --srcdir=.. --prefix="$$dc_install_base" \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__post_remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool \
-	distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
-	am--refresh check check-am clean clean-cscope clean-generic \
-	clean-libtool cscope cscopelist-am ctags ctags-am dist \
-	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
-	dist-xz dist-zip distcheck distclean distclean-generic \
-	distclean-libtool distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installcheck-local \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
-	tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Define rules for lib, progs, check, and tests.
-# These simply involve recursing into subdirectories.
-test _test: check
-
-lib progs check-p check-s:
-	for d in $(SUBDIRS); do                                \
-	  if test $$d != .; then                                        \
-	   (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;            \
-	  fi;                                                           \
-	done
-
-# Make all, tests, and (un)install
-tests:
-	for d in $(SUBDIRS); do                        \
-	  if test $$d != .; then                                        \
-	   (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;            \
-	  fi;                                                           \
-	  done
-
-# Check-clean also recurses into examples directory
-check-clean:
-	for d in $(SUBDIRS) examples; do               \
-	  if test $$d != .; then                                        \
-	   (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;            \
-	  fi;                                                           \
-	done
-	$(RM) -rf prefix-tmp destdir-tmp
-
-# Some C++ compilers/linkers will create a directory named ii_files in
-# the root directory, which should be cleaned.
-mostlyclean-local:
-	if test -d ii_files; then                                       \
-	  $(RM) -rf ii_files;                                           \
-	fi
-
-# 'make install' will now install examples, the same as 'make install-all'.
-# 'make-install-all' will be redundant but will still work.
-install: install-recursive install-examples
-uninstall: uninstall-recursive uninstall-examples 
-
-# 'make install-all' also installs examples
-install-all:
-	@$(MAKE) $(AM_MAKEFLAGS) install
-uninstall-all:
-	@$(MAKE) $(AM_MAKEFLAGS) uninstall
-
-# Install examples in this directory and recursively
-install-examples uninstall-examples:
-	for d in examples $(HDF5_INTERFACES) $(HL); do               \
-	    (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;           \
-	done
-
-# Placeholder to remind users that docs are now in a separate repository.
-install-doc:
-	@echo "docs no longer live in this tree.  Use install-examples to install examples."
-
-uninstall-doc:
-	@echo "docs no longer live in this tree.  Use install-examples to install examples."
-
-# `make check-install' or `make installcheck' checks that examples can 
-#  be successfully built
-installcheck-local:
-	if test -n "${DESTDIR}"; then                                  \
-          (cd ${DESTDIR}$(bindir) && pwd && ./h5redeploy -force);     \
-        fi
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# check-all-install tests all installation methods.
-# Install via different mechanism and then compare against the default.
-# Fine if only libXXX.a files are different since they may have been ranlib'ed.
-check-all-install:
-	@echo Installing to default location
-	$(MAKE) install
-	@echo Installing to different prefix location
-	$(MAKE) prefix=${ROOT}/prefix-tmp install
-	@echo Compare against the default installation.
-	@echo Fine if only libXXX.a files are different.
-	-diff -r prefix-tmp ${prefix}
-	@echo Installing to different $$\DESTDIR location
-	env DESTDIR=${ROOT}/destdir-tmp $(MAKE) install
-	@echo Compare against the default installation.
-	@echo Fine if only libXXX.a files are different.
-	-diff -r destdir-tmp${prefix} ${prefix}
-
-# Only source files in the src directory include tracing information,
-# so 'make trace' only needs to recurse into that directory.
-trace:
-	@(cd src && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-# Run tests with different Virtual File Drivers.
-# Currently, only invoke check-vfd in the test directory.
-check-vfd:
-	for d in src test; do                                 \
-	  if test $$d != .; then                                       \
-	    (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;          \
-	  fi;                                                          \
-	done
-
-# Automake wants to make config.status depend on configure.  This
-# makes sense, but config.status can't always be regenerated
-# properly, which can cause builds to fail.
-# This is a problem for our Daily Tests, which need to be able to
-# 'make distclean' reliably before running configure.
-# The simple solution is to override the dependency Automake supplies
-# for config.status so that it will never be regenerated.
-$(top_builddir)/config.status:
-
-# Don't include conclude.am in root Makefile; tests target needs to
-# recurse into reguar subdirs.
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/README.txt b/README.txt
index 2bcb781..7333a85 100644
--- a/README.txt
+++ b/README.txt
@@ -1,4 +1,4 @@
-HDF5 version 1.9.231 currently under development
+HDF5 version 1.9.232 currently under development
 Please refer to the release_docs/INSTALL file for installation instructions.
 ------------------------------------------------------------------------------
 
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644
index e10c539..0000000
--- a/aclocal.m4
+++ /dev/null
@@ -1,9774 +0,0 @@
-# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.14'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.14.1], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.14.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
-      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
-      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
-      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
-      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                    [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named 'D' -- because '-MD' means "put the output
-  # in D".
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
-      # Solaris 10 /bin/sh.
-      echo '/* dummy */' > sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with '-c' and '-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle '-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs.
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # After this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested.
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok '-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
-  [--enable-dependency-tracking],
-  [do not reject slow dependency extractors])
-AS_HELP_STRING(
-  [--disable-dependency-tracking],
-  [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-  am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Older Autoconf quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named 'Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running 'make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "$am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
-m4_define([AC_PROG_CC],
-m4_defn([AC_PROG_CC])
-[_AM_PROG_CC_C_O
-])
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.65])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
-             [$0: two- and three-arguments forms are deprecated.])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
-  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
-  [ok:ok],,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility.  To be removed once Automake 1.9.x
-# dies out for good.  For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-			     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES([CC])],
-		  [m4_define([AC_PROG_CC],
-			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES([CXX])],
-		  [m4_define([AC_PROG_CXX],
-			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES([OBJC])],
-		  [m4_define([AC_PROG_OBJC],
-			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
-		  [_AM_DEPENDENCIES([OBJCXX])],
-		  [m4_define([AC_PROG_OBJCXX],
-			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
-])
-AC_REQUIRE([AM_SILENT_RULES])dnl
-dnl The testsuite driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
-dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-
-# POSIX will say in a future version that running "rm -f" with no argument
-# is OK; and we want to be able to make that assumption in our Makefile
-# recipes.  So use an aggressive probe to check that the usage we want is
-# actually supported "in the wild" to an acceptable degree.
-# See automake bug#10828.
-# To make any issue more visible, cause the running configure to be aborted
-# by default if the 'rm' program in use doesn't match our expectations; the
-# user can still override this though.
-if rm -f && rm -fr && rm -rf; then : OK; else
-  cat >&2 <<'END'
-Oops!
-
-Your 'rm' program seems unable to run without file operands specified
-on the command line, even when the '-f' option is present.  This is contrary
-to the behaviour of most rm programs out there, and not conforming with
-the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
-
-Please tell bug-automake@gnu.org about your system, including the value
-of your $PATH and any error possibly output before this message.  This
-can help us improve future automake versions.
-
-END
-  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
-    echo 'Configuration will proceed anyway, since you have set the' >&2
-    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
-    echo >&2
-  else
-    cat >&2 <<'END'
-Aborting the configuration process, to ensure you take notice of the issue.
-
-You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <http://www.gnu.org/software/coreutils/>.
-
-If you want to complete the configuration process using your problematic
-'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
-to "yes", and re-run configure.
-
-END
-    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
-  fi
-fi])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST([install_sh])])
-
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless 'enable' is passed literally.
-# For symmetry, 'disable' may be passed as well.  Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
-       [enable], [m4_define([am_maintainer_other], [disable])],
-       [disable], [m4_define([am_maintainer_other], [enable])],
-       [m4_define([am_maintainer_other], [enable])
-        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
-  AC_ARG_ENABLE([maintainer-mode],
-    [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
-      am_maintainer_other[ make rules and dependencies not useful
-      (and sometimes confusing) to the casual installer])],
-    [USE_MAINTAINER_MODE=$enableval],
-    [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
-  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST([MAINT])dnl
-]
-)
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it is modern enough.
-# If it is, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
-  am_missing_run="$MISSING "
-else
-  am_missing_run=
-  AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_CC_C_O
-# ---------------
-# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
-# to automatically call this.
-AC_DEFUN([_AM_PROG_CC_C_O],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([compile])dnl
-AC_LANG_PUSH([C])dnl
-AC_CACHE_CHECK(
-  [whether $CC understands -c and -o together],
-  [am_cv_prog_cc_c_o],
-  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
-  # Make sure it works both with $CC and with simple cc.
-  # Following AC_PROG_CC_C_O, we do the test twice because some
-  # compilers refuse to overwrite an existing .o file with -o,
-  # though they will create one.
-  am_cv_prog_cc_c_o=yes
-  for am_i in 1 2; do
-    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
-         && test -f conftest2.$ac_objext; then
-      : OK
-    else
-      am_cv_prog_cc_c_o=no
-      break
-    fi
-  done
-  rm -f core conftest*
-  unset am_i])
-if test "$am_cv_prog_cc_c_o" != yes; then
-   # Losing compiler, so override with the script.
-   # FIXME: It is wrong to rewrite CC.
-   # But if we don't then we get into trouble of one sort or another.
-   # A longer-term fix would be to have automake use am__CC in this case,
-   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
-   CC="$am_aux_dir/compile $CC"
-fi
-AC_LANG_POP([C])])
-
-# For backward compatibility.
-AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_RUN_LOG(COMMAND)
-# -------------------
-# Run COMMAND, save the exit status in ac_status, and log it.
-# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
-AC_DEFUN([AM_RUN_LOG],
-[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
-   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
-   ac_status=$?
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   (exit $ac_status); }])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   am_has_slept=no
-   for am_try in 1 2; do
-     echo "timestamp, slept: $am_has_slept" > conftest.file
-     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-     if test "$[*]" = "X"; then
-	# -L didn't work.
-	set X `ls -t "$srcdir/configure" conftest.file`
-     fi
-     if test "$[*]" != "X $srcdir/configure conftest.file" \
-	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-	# If neither matched, then we have a broken ls.  This can happen
-	# if, for instance, CONFIG_SHELL is bash and it inherits a
-	# broken ls alias from the environment.  This has actually
-	# happened.  Such a system could not be considered "sane".
-	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-  alias in your environment])
-     fi
-     if test "$[2]" = conftest.file || test $am_try -eq 2; then
-       break
-     fi
-     # Just in case.
-     sleep 1
-     am_has_slept=yes
-   done
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
-  ( sleep 1 ) &
-  am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
-  [AC_MSG_CHECKING([that generated files are newer than configure])
-   if test -n "$am_sleep_pid"; then
-     # Hide warnings about reused PIDs.
-     wait $am_sleep_pid 2>/dev/null
-   fi
-   AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# ("yes" being less verbose, "no" or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules], [dnl
-AS_HELP_STRING(
-  [--enable-silent-rules],
-  [less verbose build output (undo: "make V=1")])
-AS_HELP_STRING(
-  [--disable-silent-rules],
-  [verbose build output (undo: "make V=0")])dnl
-])
-case $enable_silent_rules in @%:@ (((
-  yes) AM_DEFAULT_VERBOSITY=0;;
-   no) AM_DEFAULT_VERBOSITY=1;;
-    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
-dnl
-dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
-dnl do not support nested variable expansions.
-dnl See automake bug#9928 and bug#10237.
-am_make=${MAKE-make}
-AC_CACHE_CHECK([whether $am_make supports nested variables],
-   [am_cv_make_support_nested_variables],
-   [if AS_ECHO([['TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
-	@$(TRUE)
-.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
-  am_cv_make_support_nested_variables=yes
-else
-  am_cv_make_support_nested_variables=no
-fi])
-if test $am_cv_make_support_nested_variables = yes; then
-  dnl Using '$V' instead of '$(V)' breaks IRIX make.
-  AM_V='$(V)'
-  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
-  AM_V=$AM_DEFAULT_VERBOSITY
-  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AC_SUBST([AM_V])dnl
-AM_SUBST_NOTMAKE([AM_V])dnl
-AC_SUBST([AM_DEFAULT_V])dnl
-AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
-AM_BACKSLASH='\'
-AC_SUBST([AM_BACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
-])
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip".  However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-#
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.  Yes, it's still used
-# in the wild :-(  We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-
-m4_if([$1], [v7],
-  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
-
-  [m4_case([$1],
-    [ustar],
-     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
-      # There is notably a 21 bits limit for the UID and the GID.  In fact,
-      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
-      # and bug#13588).
-      am_max_uid=2097151 # 2^21 - 1
-      am_max_gid=$am_max_uid
-      # The $UID and $GID variables are not portable, so we need to resort
-      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
-      # below are definitely unexpected, so allow the users to see them
-      # (that is, avoid stderr redirection).
-      am_uid=`id -u || echo unknown`
-      am_gid=`id -g || echo unknown`
-      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
-      if test $am_uid -le $am_max_uid; then
-         AC_MSG_RESULT([yes])
-      else
-         AC_MSG_RESULT([no])
-         _am_tools=none
-      fi
-      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
-      if test $am_gid -le $am_max_gid; then
-         AC_MSG_RESULT([yes])
-      else
-        AC_MSG_RESULT([no])
-        _am_tools=none
-      fi],
-
-  [pax],
-    [],
-
-  [m4_fatal([Unknown tar format])])
-
-  AC_MSG_CHECKING([how to create a $1 tar archive])
-
-  # Go ahead even if we have the value already cached.  We do so because we
-  # need to set the values for the 'am__tar' and 'am__untar' variables.
-  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
-
-  for _am_tool in $_am_tools; do
-    case $_am_tool in
-    gnutar)
-      for _am_tar in tar gnutar gtar; do
-        AM_RUN_LOG([$_am_tar --version]) && break
-      done
-      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-      am__untar="$_am_tar -xf -"
-      ;;
-    plaintar)
-      # Must skip GNU tar: if it does not support --format= it doesn't create
-      # ustar tarball either.
-      (tar --version) >/dev/null 2>&1 && continue
-      am__tar='tar chf - "$$tardir"'
-      am__tar_='tar chf - "$tardir"'
-      am__untar='tar xf -'
-      ;;
-    pax)
-      am__tar='pax -L -x $1 -w "$$tardir"'
-      am__tar_='pax -L -x $1 -w "$tardir"'
-      am__untar='pax -r'
-      ;;
-    cpio)
-      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-      am__untar='cpio -i -H $1 -d'
-      ;;
-    none)
-      am__tar=false
-      am__tar_=false
-      am__untar=false
-      ;;
-    esac
-
-    # If the value was cached, stop now.  We just wanted to have am__tar
-    # and am__untar set.
-    test -n "${am_cv_prog_tar_$1}" && break
-
-    # tar/untar a dummy directory, and stop if the command works.
-    rm -rf conftest.dir
-    mkdir conftest.dir
-    echo GrepMe > conftest.dir/file
-    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-    rm -rf conftest.dir
-    if test -s conftest.tar; then
-      AM_RUN_LOG([$am__untar <conftest.tar])
-      AM_RUN_LOG([cat conftest.dir/file])
-      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-    fi
-  done
-  rm -rf conftest.dir
-
-  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/aclocal_cxx.m4])
-m4_include([m4/aclocal_fc.m4])
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-m4_define([_LT_COPYING], [dnl
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-])
-
-# serial 57 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-m4_defun([LT_PREREQ],
-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
-       [m4_default([$3],
-		   [m4_fatal([Libtool version $1 or higher is required],
-		             63)])],
-       [$2])])
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-m4_defun([_LT_CHECK_BUILDDIR],
-[case `pwd` in
-  *\ * | *\	*)
-    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
-esac
-])
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
-AC_BEFORE([$0], [LT_LANG])dnl
-AC_BEFORE([$0], [LT_OUTPUT])dnl
-AC_BEFORE([$0], [LTDL_INIT])dnl
-m4_require([_LT_CHECK_BUILDDIR])dnl
-
-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
-dnl unless we require an AC_DEFUNed macro:
-AC_REQUIRE([LTOPTIONS_VERSION])dnl
-AC_REQUIRE([LTSUGAR_VERSION])dnl
-AC_REQUIRE([LTVERSION_VERSION])dnl
-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
-m4_require([_LT_PROG_LTMAIN])dnl
-
-_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
-
-dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-_LT_SETUP
-
-# Only expand once:
-m4_define([LT_INIT])
-])# LT_INIT
-
-# Old names:
-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
-])
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-m4_defun([_LT_FILEUTILS_DEFAULTS],
-[: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-])# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-m4_defun([_LT_SETUP],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
-
-_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
-dnl
-_LT_DECL([], [host_alias], [0], [The host system])dnl
-_LT_DECL([], [host], [0])dnl
-_LT_DECL([], [host_os], [0])dnl
-dnl
-_LT_DECL([], [build_alias], [0], [The build system])dnl
-_LT_DECL([], [build], [0])dnl
-_LT_DECL([], [build_os], [0])dnl
-dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-test -z "$LN_S" && LN_S="ln -s"
-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
-dnl
-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
-dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
-m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_WITH_SYSROOT])dnl
-
-_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-])
-if test -n "${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-_LT_CHECK_OBJDIR
-
-m4_require([_LT_TAG_COMPILER])dnl
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    _LT_PATH_MAGIC
-  fi
-  ;;
-esac
-
-# Use C for the default configuration in the libtool script
-LT_SUPPORTED_TAG([CC])
-_LT_LANG_C_CONFIG
-_LT_LANG_DEFAULT_CONFIG
-_LT_CONFIG_COMMANDS
-])# _LT_SETUP
-
-
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
-[# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-])
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-m4_defun([_LT_PROG_LTMAIN],
-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
-])# _LT_PROG_LTMAIN
-
-
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL_INIT],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
-[_LT_CONFIG_LIBTOOL([$1])
-_LT_CONFIG_LIBTOOL_INIT([$2])
-])
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-m4_define([_LT_FORMAT_COMMENT],
-[m4_ifval([$1], [
-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
-              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-)])
-
-
-
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME.  Any other value will be used directly.
-m4_define([_LT_DECL],
-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
-    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
-	[m4_ifval([$1], [$1], [$2])])
-    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
-    m4_ifval([$4],
-	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
-    lt_dict_add_subkey([lt_decl_dict], [$2],
-	[tagged?], [m4_ifval([$5], [yes], [no])])])
-])
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_tag_varnames],
-[_lt_decl_filter([tagged?], [yes], $@)])
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-m4_define([_lt_decl_filter],
-[m4_case([$#],
-  [0], [m4_fatal([$0: too few arguments: $#])],
-  [1], [m4_fatal([$0: too few arguments: $#: $1])],
-  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
-  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
-  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-])
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-m4_define([lt_decl_quote_varnames],
-[_lt_decl_filter([value], [1], $@)])
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_dquote_varnames],
-[_lt_decl_filter([value], [2], $@)])
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_varnames_tagged],
-[m4_assert([$# <= 2])dnl
-_$0(m4_quote(m4_default([$1], [[, ]])),
-    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
-    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
-m4_define([_lt_decl_varnames_tagged],
-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_all_varnames],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
-     m4_if([$2], [],
-	   m4_quote(lt_decl_varnames),
-	m4_quote(m4_shift($@))))[]dnl
-])
-m4_define([_lt_decl_all_varnames],
-[lt_join($@, lt_decl_varnames_tagged([$1],
-			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-])
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'.  VARNAME
-# must have a single quote delimited value for this to work.
-m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly.  In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
-    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-m4_defun([_LT_LIBTOOL_TAGS],
-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
-])
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-#    # Some comment about what VAR is for.
-#    visible_name=$lt_internal_name
-m4_define([_LT_LIBTOOL_DECLARE],
-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
-					   [description])))[]dnl
-m4_pushdef([_libtool_name],
-    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
-    [0], [_libtool_name=[$]$1],
-    [1], [_libtool_name=$lt_[]$1],
-    [2], [_libtool_name=$lt_[]$1],
-    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-])
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-[m4_foreach([_lt_var],
-    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-m4_define([_LT_LIBTOOL_TAG_VARS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'.  Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-m4_defun([_LT_CONFIG_COMMANDS],
-[AC_PROVIDE_IFELSE([LT_OUTPUT],
-	dnl If the libtool generation code has been placed in $CONFIG_LT,
-	dnl instead of duplicating it all over again into config.status,
-	dnl then we will have config.status run $CONFIG_LT later, so it
-	dnl needs to know what name is stored there:
-        [AC_CONFIG_COMMANDS([libtool],
-            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
-    dnl If the libtool generation code is destined for config.status,
-    dnl expand the accumulated commands and init code now:
-    [AC_CONFIG_COMMANDS([libtool],
-        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-])#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-[
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-_LT_CONFIG_STATUS_DECLARATIONS
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$[]1
-_LTECHO_EOF'
-}
-
-# Quote evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-_LT_OUTPUT_LIBTOOL_INIT
-])
-
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable.  If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins.  After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script.  The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-m4_ifdef([AS_INIT_GENERATED],
-[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
-[m4_defun([_LT_GENERATED_FILE_INIT],
-[m4_require([AS_PREPARE])]dnl
-[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
-[lt_write_fail=0
-cat >$1 <<_ASEOF || lt_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-$2
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$1 <<\_ASEOF || lt_write_fail=1
-AS_SHELL_SANITIZE
-_AS_PREPARE
-exec AS_MESSAGE_FD>&1
-_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
-m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-AC_DEFUN([LT_OUTPUT],
-[: ${CONFIG_LT=./config.lt}
-AC_MSG_NOTICE([creating $CONFIG_LT])
-_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
-[# Run this file to recreate a libtool stub with the current configuration.])
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-lt_cl_silent=false
-exec AS_MESSAGE_LOG_FD>>config.log
-{
-  echo
-  AS_BOX([Running $as_me.])
-} >&AS_MESSAGE_LOG_FD
-
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
-
-Usage: $[0] [[OPTIONS]]
-
-  -h, --help      print this help, then exit
-  -V, --version   print version number, then exit
-  -q, --quiet     do not print progress messages
-  -d, --debug     don't remove temporary files
-
-Report bugs to <bug-libtool@gnu.org>."
-
-lt_cl_version="\
-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-configured by $[0], generated by m4_PACKAGE_STRING.
-
-Copyright (C) 2011 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
-
-while test $[#] != 0
-do
-  case $[1] in
-    --version | --v* | -V )
-      echo "$lt_cl_version"; exit 0 ;;
-    --help | --h* | -h )
-      echo "$lt_cl_help"; exit 0 ;;
-    --debug | --d* | -d )
-      debug=: ;;
-    --quiet | --q* | --silent | --s* | -q )
-      lt_cl_silent=: ;;
-
-    -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
-
-    *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
-  esac
-  shift
-done
-
-if $lt_cl_silent; then
-  exec AS_MESSAGE_FD>/dev/null
-fi
-_LTEOF
-
-cat >>"$CONFIG_LT" <<_LTEOF
-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AC_MSG_NOTICE([creating $ofile])
-_LT_OUTPUT_LIBTOOL_COMMANDS
-AS_EXIT(0)
-_LTEOF
-chmod +x "$CONFIG_LT"
-
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure.  Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-lt_cl_success=:
-test "$silent" = yes &&
-  lt_config_lt_args="$lt_config_lt_args --quiet"
-exec AS_MESSAGE_LOG_FD>/dev/null
-$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-exec AS_MESSAGE_LOG_FD>>config.log
-$lt_cl_success || AS_EXIT(1)
-])# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars.  Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-m4_defun([_LT_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_CONFIG_SAVE_COMMANDS([
-  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
-  m4_if(_LT_TAG, [C], [
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-_LT_COPYING
-_LT_LIBTOOL_TAGS
-
-# ### BEGIN LIBTOOL CONFIG
-_LT_LIBTOOL_CONFIG_VARS
-_LT_LIBTOOL_TAG_VARS
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-  _LT_PROG_LTMAIN
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" \
-     || (rm -f "$cfgfile"; exit 1)
-
-  _LT_PROG_REPLACE_SHELLFNS
-
-   mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-],
-[cat <<_LT_EOF >> "$ofile"
-
-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-dnl in a comment (ie after a #).
-# ### BEGIN LIBTOOL TAG CONFIG: $1
-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-# ### END LIBTOOL TAG CONFIG: $1
-_LT_EOF
-])dnl /m4_if
-],
-[m4_if([$1], [], [
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'], [])
-])dnl /_LT_CONFIG_SAVE_COMMANDS
-])# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
-AC_DEFUN([LT_SUPPORTED_TAG], [])
-
-
-# C support is built-in for now
-m4_define([_LT_LANG_C_enabled], [])
-m4_define([_LT_TAGS], [])
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-AC_DEFUN([LT_LANG],
-[AC_BEFORE([$0], [LT_OUTPUT])dnl
-m4_case([$1],
-  [C],			[_LT_LANG(C)],
-  [C++],		[_LT_LANG(CXX)],
-  [Go],			[_LT_LANG(GO)],
-  [Java],		[_LT_LANG(GCJ)],
-  [Fortran 77],		[_LT_LANG(F77)],
-  [Fortran],		[_LT_LANG(FC)],
-  [Windows Resource],	[_LT_LANG(RC)],
-  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
-    [_LT_LANG($1)],
-    [m4_fatal([$0: unsupported language: "$1"])])])dnl
-])# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-m4_defun([_LT_LANG],
-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
-  [LT_SUPPORTED_TAG([$1])dnl
-  m4_append([_LT_TAGS], [$1 ])dnl
-  m4_define([_LT_LANG_]$1[_enabled], [])dnl
-  _LT_LANG_$1_CONFIG($1)])dnl
-])# _LT_LANG
-
-
-m4_ifndef([AC_PROG_GO], [
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-m4_defun([AC_PROG_GO],
-[AC_LANG_PUSH(Go)dnl
-AC_ARG_VAR([GOC],     [Go compiler command])dnl
-AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
-_AC_ARG_VAR_LDFLAGS()dnl
-AC_CHECK_TOOL(GOC, gccgo)
-if test -z "$GOC"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
-  fi
-fi
-if test -z "$GOC"; then
-  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
-fi
-])#m4_defun
-])#m4_ifndef
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-m4_defun([_LT_LANG_DEFAULT_CONFIG],
-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
-  [LT_LANG(CXX)],
-  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_F77],
-  [LT_LANG(F77)],
-  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_FC],
-  [LT_LANG(FC)],
-  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
-
-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
-dnl pulling things in needlessly.
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-  [LT_LANG(GCJ)],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-    [LT_LANG(GCJ)],
-    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
-      [LT_LANG(GCJ)],
-      [m4_ifdef([AC_PROG_GCJ],
-	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([A][M_PROG_GCJ],
-	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([LT_PROG_GCJ],
-	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
-
-AC_PROVIDE_IFELSE([AC_PROG_GO],
-  [LT_LANG(GO)],
-  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
-
-AC_PROVIDE_IFELSE([LT_PROG_RC],
-  [LT_LANG(RC)],
-  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
-])# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-dnl AC_DEFUN([AC_LIBTOOL_RC], [])
-
-
-# _LT_TAG_COMPILER
-# ----------------
-m4_defun([_LT_TAG_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-m4_defun([_LT_COMPILER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-m4_defun([_LT_LINKER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
-  case $host_os in
-    rhapsody* | darwin*)
-    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
-    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-    AC_CHECK_TOOL([LIPO], [lipo], [:])
-    AC_CHECK_TOOL([OTOOL], [otool], [:])
-    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
-    _LT_DECL([], [DSYMUTIL], [1],
-      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
-    _LT_DECL([], [NMEDIT], [1],
-      [Tool to change global to local symbols on Mac OS X])
-    _LT_DECL([], [LIPO], [1],
-      [Tool to manipulate fat objects and archives on Mac OS X])
-    _LT_DECL([], [OTOOL], [1],
-      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
-    _LT_DECL([], [OTOOL64], [1],
-      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
-
-    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
-      [lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-	# By default we will add the -single_module flag. You can override
-	# by either setting the environment variable LT_MULTI_MODULE
-	# non-empty at configure time, or by adding -multi_module to the
-	# link flags.
-	rm -rf libconftest.dylib*
-	echo "int foo(void){return 1;}" > conftest.c
-	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
-	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-        _lt_result=$?
-	# If there is a non-empty error log, and "single_module"
-	# appears in it, assume the flag caused a linker warning
-        if test -s conftest.err && $GREP single_module conftest.err; then
-	  cat conftest.err >&AS_MESSAGE_LOG_FD
-	# Otherwise, if the output was created with a 0 exit code from
-	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
-	  lt_cv_apple_cc_single_mod=yes
-	else
-	  cat conftest.err >&AS_MESSAGE_LOG_FD
-	fi
-	rm -rf libconftest.dylib*
-	rm -f conftest.*
-      fi])
-
-    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
-      [lt_cv_ld_exported_symbols_list],
-      [lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-	[lt_cv_ld_exported_symbols_list=yes],
-	[lt_cv_ld_exported_symbols_list=no])
-	LDFLAGS="$save_LDFLAGS"
-    ])
-
-    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
-      [lt_cv_ld_force_load=no
-      cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
-      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
-      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
-      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
-      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
-      cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
-      _lt_result=$?
-      if test -s conftest.err && $GREP force_load conftest.err; then
-	cat conftest.err >&AS_MESSAGE_LOG_FD
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
-	lt_cv_ld_force_load=yes
-      else
-	cat conftest.err >&AS_MESSAGE_LOG_FD
-      fi
-        rm -f conftest.err libconftest.a conftest conftest.c
-        rm -rf conftest.dSYM
-    ])
-    case $host_os in
-    rhapsody* | darwin1.[[012]])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[[012]]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
-      _lt_dsymutil='~$DSYMUTIL $lib || :'
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-])
-
-
-# _LT_DARWIN_LINKER_FEATURES([TAG])
-# ---------------------------------
-# Checks for linker and compiler features on darwin
-m4_defun([_LT_DARWIN_LINKER_FEATURES],
-[
-  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_automatic, $1)=yes
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
-                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
-  else
-    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-  fi
-  _LT_TAGVAR(link_all_deplibs, $1)=yes
-  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-  case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
-     *) _lt_dar_can_shared=$GCC ;;
-  esac
-  if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=func_echo_all
-    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    m4_if([$1], [CXX],
-[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-    fi
-],[])
-  else
-  _LT_TAGVAR(ld_shlibs, $1)=no
-  fi
-])
-
-# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
-# ----------------------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-# Store the results from the different compilers for each TAGNAME.
-# Allow to override them for all tags through lt_cv_aix_libpath.
-m4_defun([_LT_SYS_MODULE_PATH_AIX],
-[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
-  aix_libpath=$lt_cv_aix_libpath
-else
-  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
-  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
-  lt_aix_libpath_sed='[
-      /Import File Strings/,/^$/ {
-	  /^0/ {
-	      s/^0  *\([^ ]*\) *$/\1/
-	      p
-	  }
-      }]'
-  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  # Check for a 64-bit object if we didn't find anything.
-  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  fi],[])
-  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
-  fi
-  ])
-  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
-fi
-])# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-m4_define([_LT_SHELL_INIT],
-[m4_divert_text([M4SH-INIT], [$1
-])])# _LT_SHELL_INIT
-
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
-m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-AC_MSG_CHECKING([how to print strings])
-# Test print first, because it will be a builtin if present.
-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
-   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='printf %s\n'
-else
-  # Use this function as a fallback that always works.
-  func_fallback_echo ()
-  {
-    eval 'cat <<_LTECHO_EOF
-$[]1
-_LTECHO_EOF'
-  }
-  ECHO='func_fallback_echo'
-fi
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*" 
-}
-
-case "$ECHO" in
-  printf*) AC_MSG_RESULT([printf]) ;;
-  print*) AC_MSG_RESULT([print -r]) ;;
-  *) AC_MSG_RESULT([cat]) ;;
-esac
-
-m4_ifdef([_AS_DETECT_SUGGESTED],
-[_AS_DETECT_SUGGESTED([
-  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
-    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-    PATH=/empty FPATH=/empty; export PATH FPATH
-    test "X`printf %s $ECHO`" = "X$ECHO" \
-      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
-
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_WITH_SYSROOT
-# ----------------
-AC_DEFUN([_LT_WITH_SYSROOT],
-[AC_MSG_CHECKING([for sysroot])
-AC_ARG_WITH([sysroot],
-[  --with-sysroot[=DIR] Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).],
-[], [with_sysroot=no])
-
-dnl lt_sysroot will always be passed unquoted.  We quote it here
-dnl in case the user passed a directory name.
-lt_sysroot=
-case ${with_sysroot} in #(
- yes)
-   if test "$GCC" = yes; then
-     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-   fi
-   ;; #(
- /*)
-   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
-   ;; #(
- no|'')
-   ;; #(
- *)
-   AC_MSG_RESULT([${with_sysroot}])
-   AC_MSG_ERROR([The sysroot must be an absolute path.])
-   ;;
-esac
-
- AC_MSG_RESULT([${lt_sysroot:-no}])
-_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
-
-# _LT_ENABLE_LOCK
-# ---------------
-m4_defun([_LT_ENABLE_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-  [AS_HELP_STRING([--disable-libtool-lock],
-    [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-      *ELF-32*)
-	HPUX_IA64_MODE="32"
-	;;
-      *ELF-64*)
-	HPUX_IA64_MODE="64"
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -melf32bsmip"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -melf32bmipn32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -melf64bmip"
-	;;
-      esac
-    else
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -32"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -n32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -64"
-	  ;;
-      esac
-    fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-      *32-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_i386_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
-	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
-	    LD="${LD-ld} -m elf32ppclinux"
-	    ;;
-	  s390x-*linux*)
-	    LD="${LD-ld} -m elf_s390"
-	    ;;
-	  sparc64-*linux*)
-	    LD="${LD-ld} -m elf32_sparc"
-	    ;;
-	esac
-	;;
-      *64-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_x86_64_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_x86_64"
-	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
-	    LD="${LD-ld} -m elf64ppc"
-	    ;;
-	  s390*-*linux*|s390*-*tpf*)
-	    LD="${LD-ld} -m elf64_s390"
-	    ;;
-	  sparc*-*linux*)
-	    LD="${LD-ld} -m elf64_sparc"
-	    ;;
-	esac
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*)
-        case $host in
-        i?86-*-solaris*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        sparc*-*-solaris*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-        esac
-        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
-        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
-        fi
-        ;;
-      *)
-	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-	  LD="${LD-ld} -64"
-	fi
-	;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-esac
-
-need_locks="$enable_libtool_lock"
-])# _LT_ENABLE_LOCK
-
-
-# _LT_PROG_AR
-# -----------
-m4_defun([_LT_PROG_AR],
-[AC_CHECK_TOOLS(AR, [ar], false)
-: ${AR=ar}
-: ${AR_FLAGS=cru}
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
-
-AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
-  [lt_cv_ar_at_file=no
-   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
-     [echo conftest.$ac_objext > conftest.lst
-      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
-      AC_TRY_EVAL([lt_ar_try])
-      if test "$ac_status" -eq 0; then
-	# Ensure the archiver fails upon bogus file names.
-	rm -f conftest.$ac_objext libconftest.a
-	AC_TRY_EVAL([lt_ar_try])
-	if test "$ac_status" -ne 0; then
-          lt_cv_ar_at_file=@
-        fi
-      fi
-      rm -f conftest.* libconftest.a
-     ])
-  ])
-
-if test "x$lt_cv_ar_at_file" = xno; then
-  archiver_list_spec=
-else
-  archiver_list_spec=$lt_cv_ar_at_file
-fi
-_LT_DECL([], [archiver_list_spec], [1],
-  [How to feed a file listing to the archiver])
-])# _LT_PROG_AR
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-m4_defun([_LT_CMD_OLD_ARCHIVE],
-[_LT_PROG_AR
-
-AC_CHECK_TOOL(STRIP, strip, :)
-test -z "$STRIP" && STRIP=:
-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-test -z "$RANLIB" && RANLIB=:
-_LT_DECL([], [RANLIB], [1],
-    [Commands used to install an old-style archive])
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
-fi
-
-case $host_os in
-  darwin*)
-    lock_old_archive_extraction=yes ;;
-  *)
-    lock_old_archive_extraction=no ;;
-esac
-_LT_DECL([], [old_postinstall_cmds], [2])
-_LT_DECL([], [old_postuninstall_cmds], [2])
-_LT_TAGDECL([], [old_archive_cmds], [2],
-    [Commands used to build an old-style archive])
-_LT_DECL([], [lock_old_archive_extraction], [0],
-    [Whether to use a lock for old archive extraction])
-])# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([_LT_COMPILER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       $2=yes
-     fi
-   fi
-   $RM conftest*
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$5], , :, [$5])
-else
-    m4_if([$6], , :, [$6])
-fi
-])# _LT_COMPILER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                  [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-AC_DEFUN([_LT_LINKER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         $2=yes
-       fi
-     else
-       $2=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$4], , :, [$4])
-else
-    m4_if([$5], , :, [$5])
-fi
-])# _LT_LINKER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-
-
-# LT_CMD_MAX_LEN
-#---------------
-AC_DEFUN([LT_CMD_MAX_LEN],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw* | cegcc*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  mint*)
-    # On MiNT this can take a long time and run out of memory.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  os2*)
-    # The test takes a long time on OS/2.
-    lt_cv_sys_max_cmd_len=8192
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      # Make teststring a little bigger before we do anything with it.
-      # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
-        teststring=$teststring$teststring
-      done
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      # If test is not a shell built-in, we'll probably end up computing a
-      # maximum length that is only half of the actual maximum length, but
-      # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
-	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      # Only check the string length outside the loop.
-      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on
-      # massive amounts of additional arguments before passing them to the
-      # linker.  It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-_LT_DECL([], [max_cmd_len], [0],
-    [What is the maximum length of a command?])
-])# LT_CMD_MAX_LEN
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-m4_defun([_LT_HEADER_DLFCN],
-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
-])# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-m4_defun([_LT_TRY_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-[#line $LINENO "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}]
-_LT_EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_dlunknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-AC_DEFUN([LT_SYS_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-    ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-    ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ])
-    ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-	  lt_cv_dlopen_self_static, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-_LT_DECL([dlopen_support], [enable_dlopen], [0],
-	 [Whether dlopen is supported])
-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
-	 [Whether dlopen of programs is supported])
-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
-	 [Whether dlopen of statically linked programs is supported])
-])# LT_SYS_DLOPEN_SELF
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-m4_defun([_LT_COMPILER_C_O],
-[m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-])
-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
-	[Does compiler simultaneously support -c and -o options?])
-])# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-m4_defun([_LT_COMPILER_FILE_LOCKS],
-[m4_require([_LT_ENABLE_LOCK])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_COMPILER_C_O([$1])
-
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $RM conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
-])# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-m4_defun([_LT_CHECK_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-_LT_DECL([], [objdir], [0],
-         [The name of the directory that contains temporary libtool files])dnl
-m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
-  [Define to the sub-directory in which libtool stores uninstalled libraries.])
-])# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
-   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
-   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
-  # We can hardcode non-existent directories.
-  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
-   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-_LT_TAGDECL([], [hardcode_action], [0],
-    [How to hardcode a shared library path into an executable])
-])# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-m4_defun([_LT_CMD_STRIPLIB],
-[m4_require([_LT_DECL_EGREP])
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP" ; then
-      striplib="$STRIP -x"
-      old_striplib="$STRIP -S"
-      AC_MSG_RESULT([yes])
-    else
-      AC_MSG_RESULT([no])
-    fi
-    ;;
-  *)
-    AC_MSG_RESULT([no])
-    ;;
-  esac
-fi
-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
-_LT_DECL([], [striplib], [1])
-])# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-m4_defun([_LT_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_OBJDUMP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-m4_if([$1],
-	[], [
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
-  case $lt_search_path_spec in
-  *\;*)
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
-    ;;
-  *)
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
-    ;;
-  esac
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
-  # AWK program above erroneously prepends '/' to C:/dos/paths
-  # for these hosts.
-  case $host_os in
-    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
-  esac
-  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[[4-9]]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  case $host_cpu in
-  powerpc)
-    # Since July 2007 AmigaOS4 officially supports .so libraries.
-    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    ;;
-  m68k)
-    library_names_spec='$libname.ixlibrary $libname.a'
-    # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-    ;;
-  esac
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[[45]]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$cc_basename in
-  yes,*)
-    # gcc
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname~
-      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-      fi'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-m4_if([$1], [],[
-      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
-      ;;
-    mingw* | cegcc*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    dynamic_linker='Win32 ld.exe'
-    ;;
-
-  *,cl*)
-    # Native MSVC
-    libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
-
-    case $build_os in
-    mingw*)
-      sys_lib_search_path_spec=
-      lt_save_ifs=$IFS
-      IFS=';'
-      for lt_path in $LIB
-      do
-        IFS=$lt_save_ifs
-        # Let DOS variable expansion print the short 8.3 style file name.
-        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-      done
-      IFS=$lt_save_ifs
-      # Convert to MSYS style.
-      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
-      ;;
-    cygwin*)
-      # Convert to unix form, then to dos form, then back to unix form
-      # but this time dos style (no spaces!) so that the unix form looks
-      # like /cygdrive/c/PROGRA~1:/cygdr...
-      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-      ;;
-    *)
-      sys_lib_search_path_spec="$LIB"
-      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      # FIXME: find the short name or the path components, as spaces are
-      # common. (e.g. "Program Files" -> "PROGRA~1")
-      ;;
-    esac
-
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-    dynamic_linker='Win32 link.exe'
-    ;;
-
-  *)
-    # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    dynamic_linker='Win32 ld.exe'
-    ;;
-  esac
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[[23]].*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2.*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-haiku*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  hppa*64*)
-    shrext_cmds='.sl'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
-  postinstall_cmds='chmod 555 $lib'
-  # or fails outright, so override atomically:
-  install_override_mode=555
-  ;;
-
-interix[[3-9]]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux # correct to gnu/linux during the next big refactor
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-
-  # Some binutils ld are patched to set DT_RUNPATH
-  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
-    [lt_cv_shlibpath_overrides_runpath=no
-    save_LDFLAGS=$LDFLAGS
-    save_libdir=$libdir
-    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-	 [lt_cv_shlibpath_overrides_runpath=yes])])
-    LDFLAGS=$save_LDFLAGS
-    libdir=$save_libdir
-    ])
-  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
-
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-*nto* | *qnx*)
-  version_type=qnx
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='ldqnx.so'
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-tpf*)
-  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-uts4*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-_LT_DECL([], [variables_saved_for_relink], [1],
-    [Variables whose values should be saved in libtool wrapper scripts and
-    restored at link time])
-_LT_DECL([], [need_lib_prefix], [0],
-    [Do we need the "lib" prefix for modules?])
-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
-_LT_DECL([], [version_type], [0], [Library versioning type])
-_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
-_LT_DECL([], [shlibpath_overrides_runpath], [0],
-    [Is shlibpath searched before the hard-coded library search path?])
-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
-_LT_DECL([], [library_names_spec], [1],
-    [[List of archive names.  First name is the real one, the rest are links.
-    The last name is the one that the linker finds with -lNAME]])
-_LT_DECL([], [soname_spec], [1],
-    [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [install_override_mode], [1],
-    [Permission mode override for installation of shared libraries])
-_LT_DECL([], [postinstall_cmds], [2],
-    [Command to use after installation of a shared archive])
-_LT_DECL([], [postuninstall_cmds], [2],
-    [Command to use after uninstallation of a shared archive])
-_LT_DECL([], [finish_cmds], [2],
-    [Commands used to finish a libtool library installation in a directory])
-_LT_DECL([], [finish_eval], [1],
-    [[As "finish_cmds", except a single script fragment to be evaled but
-    not shown]])
-_LT_DECL([], [hardcode_into_libs], [0],
-    [Whether we should hardcode library paths into libraries])
-_LT_DECL([], [sys_lib_search_path_spec], [2],
-    [Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
-    [Run-time system search path for libraries])
-])# _LT_SYS_DYNAMIC_LINKER
-
-
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
-[m4_require([_LT_DECL_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="m4_if([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-_LT_DECL([], [MAGIC_CMD], [0],
-	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
-])# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-m4_defun([_LT_PATH_MAGIC],
-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# _LT_PATH_MAGIC
-
-
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([LT_PATH_LD],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
-
-AC_ARG_WITH([gnu-ld],
-    [AS_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])dnl
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by $CC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-_LT_PATH_LD_GNU
-AC_SUBST([LD])
-
-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
-])# LT_PATH_LD
-
-# Old names:
-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_LD], [])
-dnl AC_DEFUN([AC_PROG_LD], [])
-
-
-# _LT_PATH_LD_GNU
-#- --------------
-m4_defun([_LT_PATH_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# _LT_PATH_LD_GNU
-
-
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-m4_defun([_LT_CMD_RELOAD],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
-      reload_cmds=false
-    fi
-    ;;
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_TAGDECL([], [reload_cmds], [2])dnl
-])# _LT_CMD_RELOAD
-
-
-# _LT_CHECK_MAGIC_METHOD
-# ----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_MAGIC_METHOD],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[[4-9]]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[[45]]*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    # Keep this pattern in sync with the one in func_win32_libid.
-    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-cegcc*)
-  # use the weaker test based on 'objdump'. See mingw*.
-  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-haiku*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-interix[[3-9]]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-*nto* | *qnx*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-tpf*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-
-file_magic_glob=
-want_nocaseglob=no
-if test "$build" = "$host"; then
-  case $host_os in
-  mingw* | pw32*)
-    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
-      want_nocaseglob=yes
-    else
-      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
-    fi
-    ;;
-  esac
-fi
-
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-_LT_DECL([], [deplibs_check_method], [1],
-    [Method to check whether dependent libraries are shared objects])
-_LT_DECL([], [file_magic_cmd], [1],
-    [Command to use when deplibs_check_method = "file_magic"])
-_LT_DECL([], [file_magic_glob], [1],
-    [How to find potential files when deplibs_check_method = "file_magic"])
-_LT_DECL([], [want_nocaseglob], [1],
-    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
-])# _LT_CHECK_MAGIC_METHOD
-
-
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-AC_DEFUN([LT_PATH_NM],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi])
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
-else
-  # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$DUMPBIN"; then :
-    # Let the user override the test.
-  else
-    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
-    *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
-      ;;
-    *)
-      DUMPBIN=:
-      ;;
-    esac
-  fi
-  AC_SUBST([DUMPBIN])
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
-  fi
-fi
-test -z "$NM" && NM=nm
-AC_SUBST([NM])
-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
-
-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
-  [lt_cv_nm_interface="BSD nm"
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$ac_compile" 2>conftest.err)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
-  cat conftest.out >&AS_MESSAGE_LOG_FD
-  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-    lt_cv_nm_interface="MS dumpbin"
-  fi
-  rm -f conftest*])
-])# LT_PATH_NM
-
-# Old names:
-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_NM], [])
-dnl AC_DEFUN([AC_PROG_NM], [])
-
-# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-# --------------------------------
-# how to determine the name of the shared library
-# associated with a specific link library.
-#  -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-m4_require([_LT_DECL_DLLTOOL])
-AC_CACHE_CHECK([how to associate runtime and link libraries],
-lt_cv_sharedlib_from_linklib_cmd,
-[lt_cv_sharedlib_from_linklib_cmd='unknown'
-
-case $host_os in
-cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
-  case `$DLLTOOL --help 2>&1` in
-  *--identify-strict*)
-    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
-    ;;
-  *)
-    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
-    ;;
-  esac
-  ;;
-*)
-  # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
-  ;;
-esac
-])
-sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-
-_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
-    [Command to associate shared and link libraries])
-])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-
-
-# _LT_PATH_MANIFEST_TOOL
-# ----------------------
-# locate the manifest tool
-m4_defun([_LT_PATH_MANIFEST_TOOL],
-[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
-test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
-  [lt_cv_path_mainfest_tool=no
-  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
-  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
-    lt_cv_path_mainfest_tool=yes
-  fi
-  rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
-  MANIFEST_TOOL=:
-fi
-_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
-])# _LT_PATH_MANIFEST_TOOL
-
-
-# LT_LIB_M
-# --------
-# check for math library
-AC_DEFUN([LT_LIB_M],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
-  # These system don't have libm, or don't need it
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
-  ;;
-esac
-AC_SUBST([LIBM])
-])# LT_LIB_M
-
-# Old name:
-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_CHECK_LIBM], [])
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-m4_defun([_LT_COMPILER_NO_RTTI],
-[m4_require([_LT_TAG_COMPILER])dnl
-
-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  case $cc_basename in
-  nvcc*)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
-  esac
-
-  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions], [],
-    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
-	[Compiler flag to turn off builtin functions])
-])# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32* | cegcc*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris*)
-  symcode='[[BDRT]]'
-  ;;
-sco3.2v5*)
-  symcode='[[DT]]'
-  ;;
-sysv4.2uw2*)
-  symcode='[[DT]]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[[ABDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
-    # Also find C++ and __fastcall symbols from MSVC++,
-    # which start with @ or ?.
-    lt_cv_sys_global_symbol_pipe="$AWK ['"\
-"     {last_section=section; section=\$ 3};"\
-"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
-"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-"     \$ 0!~/External *\|/{next};"\
-"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-"     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-"     ' prfx=^$ac_symprfx]"
-  else
-    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-  fi
-  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<_LT_EOF > conftest.$ac_ext
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
-   relocations are performed -- see ld's documentation on pseudo-relocs.  */
-# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data.  */
-# define LT@&t@_DLSYM_CONST
-#else
-# define LT@&t@_DLSYM_CONST const
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
-	  cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols.  */
-LT@&t@_DLSYM_CONST struct {
-  const char *name;
-  void       *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[[]] =
-{
-  { "@PROGRAM@", (void *) 0 },
-_LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-	  cat <<\_LT_EOF >> conftest.$ac_ext
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_globsym_save_LIBS=$LIBS
-	  lt_globsym_save_CFLAGS=$CFLAGS
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS=$lt_globsym_save_LIBS
-	  CFLAGS=$lt_globsym_save_CFLAGS
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-
-# Response file support.
-if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-  nm_file_list_spec='@'
-elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
-  nm_file_list_spec='@'
-fi
-
-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
-    [Take the output of nm and produce a listing of raw symbols and C names])
-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
-    [Transform the output of nm in a proper C declaration])
-_LT_DECL([global_symbol_to_c_name_address],
-    [lt_cv_sys_global_symbol_to_c_name_address], [1],
-    [Transform the output of nm in a C name address pair])
-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
-    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
-    [Transform the output of nm in a C name address pair when lib prefix is needed])
-_LT_DECL([], [nm_file_list_spec], [1],
-    [Specify filename containing input files for $NM])
-]) # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-m4_defun([_LT_COMPILER_PIC],
-[m4_require([_LT_TAG_COMPILER])dnl
-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_TAGVAR(lt_prog_compiler_static, $1)=
-
-m4_if([$1], [CXX], [
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-    *qnx* | *nto*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix[[4-9]]*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-      mingw* | cygwin* | os2* | pw32* | cegcc*)
-	# This hack is so that the source file can tell whether it is being
-	# built for inclusion in a dll (and should export symbols for example).
-	m4_if([$1], [GCJ], [],
-	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-	;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  ecpc* )
-	    # old Intel C++ for x86_64 which still supported -KPIC.
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  icpc* )
-	    # Intel C++, used to be incompatible with GCC.
-	    # ICC 10 doesn't accept -KPIC any more.
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
-	    # IBM XL 8.0, 9.0 on PPC and BlueGene
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      *qnx* | *nto*)
-        # QNX uses GNU C++, but need to define -shared option too, otherwise
-        # it will coredump.
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-        ;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC* | sunCC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
-
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	# +Z the default
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-
-    case $cc_basename in
-    nvcc*) # Cuda Compiler Driver 2.2
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
-      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
-      fi
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
-      case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
-      ecc*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # icc used to be incompatible with GCC.
-      # ICC 10 doesn't accept -KPIC any more.
-      icc* | ifort*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # Lahey Fortran 8.1.
-      lf95*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
-	;;
-      nagfor*)
-	# NAG Fortran compiler
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	;;
-      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      ccc*)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        # All Alpha code is PIC.
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-        ;;
-      xl* | bgxl* | bgf* | mpixl*)
-	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
-	  ;;
-	*Sun\ F* | *Sun*Fortran*)
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	  ;;
-	*Sun\ C*)
-	  # Sun C 5.9
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  ;;
-        *Intel*\ [[CF]]*Compiler*)
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	  ;;
-	*Portland\ Group*)
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  ;;
-	esac
-	;;
-      esac
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    rdos*)
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    unicos*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
-    ;;
-esac
-
-AC_CACHE_CHECK([for $compiler option to produce PIC],
-  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
-  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
-    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
-    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
-	[Additional compiler flags for building library objects])
-
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-	[How to pass a linker flag through the compiler])
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-  $lt_tmp_static_flag,
-  [],
-  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
-	[Compiler flag to prevent dynamic linking])
-])# _LT_COMPILER_PIC
-
-
-# _LT_LINKER_SHLIBS([TAGNAME])
-# ----------------------------
-# See if the linker supports building shared libraries.
-m4_defun([_LT_LINKER_SHLIBS],
-[AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-m4_if([$1], [CXX], [
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  case $host_os in
-  aix[[4-9]]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
-    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-    ;;
-  cygwin* | mingw* | cegcc*)
-    case $cc_basename in
-    cl*)
-      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
-      ;;
-    *)
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
-      ;;
-    esac
-    ;;
-  *)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-    ;;
-  esac
-], [
-  runpath_var=
-  _LT_TAGVAR(allow_undefined_flag, $1)=
-  _LT_TAGVAR(always_export_symbols, $1)=no
-  _LT_TAGVAR(archive_cmds, $1)=
-  _LT_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_TAGVAR(compiler_needs_object, $1)=no
-  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  _LT_TAGVAR(hardcode_automatic, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
-  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(inherit_rpath, $1)=no
-  _LT_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_TAGVAR(module_cmds, $1)=
-  _LT_TAGVAR(module_expsym_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  _LT_TAGVAR(ld_shlibs, $1)=yes
-
-  # On some targets, GNU ld is compatible enough with the native linker
-  # that we're better off using the native interface for both.
-  lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
-    case $host_os in
-      aix*)
-	# The AIX port of GNU ld has always aspired to compatibility
-	# with the native linker.  However, as the warning in the GNU ld
-	# block says, versions before 2.19.5* couldn't really create working
-	# shared libraries, regardless of the interface used.
-	case `$LD -v 2>&1` in
-	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
-	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
-	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
-	  *)
-	    lt_use_gnu_ld_interface=yes
-	    ;;
-	esac
-	;;
-      *)
-	lt_use_gnu_ld_interface=yes
-	;;
-    esac
-  fi
-
-  if test "$lt_use_gnu_ld_interface" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>&1` in
-      *GNU\ gold*) supports_anon_versioning=yes ;;
-      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[[3-9]]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.19, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
-
-_LT_EOF
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-      # as there is no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=no
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
-
-      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    haiku*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    interix[[3-9]]*)
-      _LT_TAGVAR(hardcode_direct, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-      tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
-	case $cc_basename in
-	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
-	esac
-      fi
-      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
-      then
-	tmp_addflag=' $pic_flag'
-	tmp_sharedflag='-shared'
-	case $cc_basename,$host_cpu in
-        pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95* | pgfortran*)
-					# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	lf95*)				# Lahey Fortran 8.1
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
-	  tmp_sharedflag='--shared' ;;
-	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
-	  tmp_sharedflag='-qmkshrobj'
-	  tmp_addflag= ;;
-	nvcc*)	# Cuda Compiler Driver 2.2
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  _LT_TAGVAR(compiler_needs_object, $1)=yes
-	  ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  _LT_TAGVAR(compiler_needs_object, $1)=yes
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	esac
-	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-        if test "x$supports_anon_versioning" = xyes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-        fi
-
-	case $cc_basename in
-	xlf* | bgf* | bgxlf* | mpixlf*)
-	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-	  fi
-	  ;;
-	esac
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  # For security reasons, it is highly recommended that you always
-	  # use absolute paths for naming shared libraries, and exclude the
-	  # DT_RUNPATH tag from executables and libraries.  But doing so
-	  # requires that you compile everything twice, which is a pain.
-	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  else
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-
-    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
-      runpath_var=
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
-
-    aix[[4-9]]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
-	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-	    aix_use_runtimelinking=yes
-	    break
-	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      _LT_TAGVAR(archive_cmds, $1)=''
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	  # We have reworked collect2
-	  :
-	  else
-	  # We have old collect2
-	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        _LT_SYS_MODULE_PATH_AIX([$1])
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-      else
-	if test "$host_cpu" = ia64; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an
-	 # empty executable.
-	 _LT_SYS_MODULE_PATH_AIX([$1])
-	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
-	    # We only use this code for GNU lds that support --whole-archive.
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	  else
-	    # Exported symbols can be pulled into shared objects from archives
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  fi
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    bsdi[[45]]*)
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      case $cc_basename in
-      cl*)
-	# Native MSVC
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	_LT_TAGVAR(always_export_symbols, $1)=yes
-	_LT_TAGVAR(file_list_spec, $1)='@'
-	# Tell ltmain to make .lib files, not .a files.
-	libext=lib
-	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
-	# FIXME: Setting linknames here is a bad hack.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
-	# The linker will not automatically build a static lib if we build a DLL.
-	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
-	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-	# Don't use ranlib
-	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
-	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
-	;;
-      *)
-	# Assume MSVC wrapper
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Tell ltmain to make .lib files, not .a files.
-	libext=lib
-	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
-	# FIXME: Setting linknames here is a bad hack.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-	# The linker will automatically build a .lib file if we build a DLL.
-	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-	# FIXME: Should let the user specify the lib program.
-	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-	;;
-      esac
-      ;;
-
-    darwin* | rhapsody*)
-      _LT_DARWIN_LINKER_FEATURES($1)
-      ;;
-
-    dgux*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2.*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_TAGVAR(hardcode_direct, $1)=yes
-	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	_LT_TAGVAR(hardcode_minus_L, $1)=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	m4_if($1, [], [
-	  # Older versions of the 11.00 compiler do not understand -b yet
-	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
-	  _LT_LINKER_OPTION([if $CC understands -b],
-	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
-	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
-	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
-	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  _LT_TAGVAR(hardcode_direct, $1)=no
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  ;;
-	*)
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	# Try to use the -exported_symbol ld option, if it does not
-	# work, assume that -exports_file does not work either and
-	# implicitly export all symbols.
-	# This should be the same for all languages, so no per-tag cache variable.
-	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
-	  [lt_cv_irix_exported_symbol],
-	  [save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-	   AC_LINK_IFELSE(
-	     [AC_LANG_SOURCE(
-	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
-			      [C++], [[int foo (void) { return 0; }]],
-			      [Fortran 77], [[
-      subroutine foo
-      end]],
-			      [Fortran], [[
-      subroutine foo
-      end]])])],
-	      [lt_cv_irix_exported_symbol=yes],
-	      [lt_cv_irix_exported_symbol=no])
-           LDFLAGS="$save_LDFLAGS"])
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-	fi
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(inherit_rpath, $1)=yes
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *nto* | *qnx*)
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	_LT_TAGVAR(hardcode_direct, $1)=yes
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	     ;;
-	   *)
-	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-	fi
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    os2*)
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-      else
-	case `$CC -V 2>&1` in
-	*"Compilers 5.0"*)
-	  wlarc=''
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-	  ;;
-	*)
-	  wlarc='${wl}'
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-	  ;;
-	esac
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
-	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_TAGVAR(hardcode_direct, $1)=no
-        ;;
-	motorola)
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4.3*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    esac
-
-    if test x$host_vendor = xsni; then
-      case $host in
-      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
-	;;
-      esac
-    fi
-  fi
-])
-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
-
-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
-_LT_DECL([], [extract_expsyms_cmds], [2],
-    [The commands to extract the exported symbol list from a shared archive])
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
-  # Assume -lc should be added
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_TAGVAR(archive_cmds, $1) in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
-	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
-	[$RM conftest*
-	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-	  soname=conftest
-	  lib=conftest
-	  libobjs=conftest.$ac_objext
-	  deplibs=
-	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-	  compiler_flags=-v
-	  linker_flags=-v
-	  verstring=
-	  output_objdir=.
-	  libname=conftest
-	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-	  _LT_TAGVAR(allow_undefined_flag, $1)=
-	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-	  then
-	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	  else
-	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  fi
-	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-	else
-	  cat conftest.err 1>&5
-	fi
-	$RM conftest*
-	])
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
-    [Whether or not to add -lc for building shared libraries])
-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
-    [enable_shared_with_static_runtimes], [0],
-    [Whether or not to disallow shared libs when runtime libs are static])
-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
-    [Compiler flag to allow reflexive dlopens])
-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
-    [Compiler flag to generate shared objects directly from archives])
-_LT_TAGDECL([], [compiler_needs_object], [1],
-    [Whether the compiler copes with passing no objects directly])
-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
-    [Create an old-style archive from a shared archive])
-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
-    [Create a temporary old-style archive to link instead of a shared archive])
-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
-_LT_TAGDECL([], [archive_expsym_cmds], [2])
-_LT_TAGDECL([], [module_cmds], [2],
-    [Commands used to build a loadable module if different from building
-    a shared archive.])
-_LT_TAGDECL([], [module_expsym_cmds], [2])
-_LT_TAGDECL([], [with_gnu_ld], [1],
-    [Whether we are building with GNU ld or not])
-_LT_TAGDECL([], [allow_undefined_flag], [1],
-    [Flag that allows shared libraries with undefined symbols to be built])
-_LT_TAGDECL([], [no_undefined_flag], [1],
-    [Flag that enforces no undefined symbols])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
-    [Flag to hardcode $libdir into a binary during linking.
-    This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
-    [Whether we need a single "-rpath" flag with a separated argument])
-_LT_TAGDECL([], [hardcode_direct], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary])
-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary and the resulting library dependency is
-    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
-    library is relocated])
-_LT_TAGDECL([], [hardcode_minus_L], [0],
-    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
-    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_automatic], [0],
-    [Set to "yes" if building a shared library automatically hardcodes DIR
-    into the library and all subsequent libraries and executables linked
-    against it])
-_LT_TAGDECL([], [inherit_rpath], [0],
-    [Set to yes if linker adds runtime paths of dependent libraries
-    to runtime path list])
-_LT_TAGDECL([], [link_all_deplibs], [0],
-    [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [always_export_symbols], [0],
-    [Set to "yes" if exported symbols are required])
-_LT_TAGDECL([], [export_symbols_cmds], [2],
-    [The commands to list exported symbols])
-_LT_TAGDECL([], [exclude_expsyms], [1],
-    [Symbols that should not be listed in the preloaded symbols])
-_LT_TAGDECL([], [include_expsyms], [1],
-    [Symbols that must always be exported])
-_LT_TAGDECL([], [prelink_cmds], [2],
-    [Commands necessary for linking programs (against libraries) with templates])
-_LT_TAGDECL([], [postlink_cmds], [2],
-    [Commands necessary for finishing linking programs])
-_LT_TAGDECL([], [file_list_spec], [1],
-    [Specify filename containing input files])
-dnl FIXME: Not yet implemented
-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
-dnl    [Compiler flag to generate thread safe objects])
-])# _LT_LINKER_SHLIBS
-
-
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_C_CONFIG],
-[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_TAG_COMPILER
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_SYS_DYNAMIC_LINKER($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-  LT_SYS_DLOPEN_SELF
-  _LT_CMD_STRIPLIB
-
-  # Report which library types will actually be built
-  AC_MSG_CHECKING([if libtool supports shared libraries])
-  AC_MSG_RESULT([$can_build_shared])
-
-  AC_MSG_CHECKING([whether to build shared libraries])
-  test "$can_build_shared" = "no" && enable_shared=no
-
-  # On AIX, shared libraries and static libraries use the same namespace, and
-  # are all built from PIC.
-  case $host_os in
-  aix3*)
-    test "$enable_shared" = yes && enable_static=no
-    if test -n "$RANLIB"; then
-      archive_cmds="$archive_cmds~\$RANLIB \$lib"
-      postinstall_cmds='$RANLIB $lib'
-    fi
-    ;;
-
-  aix[[4-9]]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
-    fi
-    ;;
-  esac
-  AC_MSG_RESULT([$enable_shared])
-
-  AC_MSG_CHECKING([whether to build static libraries])
-  # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
-  AC_MSG_RESULT([$enable_static])
-
-  _LT_CONFIG($1)
-fi
-AC_LANG_POP
-CC="$lt_save_CC"
-])# _LT_LANG_C_CONFIG
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-else
-  _lt_caught_CXX_error=yes
-fi
-
-AC_LANG_PUSH(C++)
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(compiler_needs_object, $1)=no
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the CXX compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="int some_variable = 0;"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC=$CC
-  lt_save_CFLAGS=$CFLAGS
-  lt_save_LD=$LD
-  lt_save_GCC=$GCC
-  GCC=$GXX
-  lt_save_with_gnu_ld=$with_gnu_ld
-  lt_save_path_LD=$lt_cv_path_LD
-  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-  else
-    $as_unset lt_cv_prog_gnu_ld
-  fi
-  if test -n "${lt_cv_path_LDCXX+set}"; then
-    lt_cv_path_LD=$lt_cv_path_LDCXX
-  else
-    $as_unset lt_cv_path_LD
-  fi
-  test -z "${LDCXX+set}" || LD=$LDCXX
-  CC=${CXX-"c++"}
-  CFLAGS=$CXXFLAGS
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    # We don't want -fno-exception when compiling C++ code, so set the
-    # no_builtin_flag separately
-    if test "$GXX" = yes; then
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-    else
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-    fi
-
-    if test "$GXX" = yes; then
-      # Set up default GNU C++ configuration
-
-      LT_PATH_LD
-
-      # Check if GNU C++ uses GNU ld as the underlying linker, since the
-      # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-        # If archive_cmds runs LD, not CC, wlarc should be empty
-        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-        #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
-
-        # ancient GNU ld didn't support --whole-archive et. al.
-        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
-	  $GREP 'no-whole-archive' > /dev/null; then
-          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-        else
-          _LT_TAGVAR(whole_archive_flag_spec, $1)=
-        fi
-      else
-        with_gnu_ld=no
-        wlarc=
-
-        # A generic and very simple default shared library creation
-        # command for GNU C++ for the case where it uses the native
-        # linker, instead of GNU ld.  If possible, this setting should
-        # overridden to take advantage of the native linker features on
-        # the platform it is being used on.
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      fi
-
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-
-    else
-      GXX=no
-      with_gnu_ld=no
-      wlarc=
-    fi
-
-    # PORTME: fill in a description of your system's C++ link characteristics
-    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-    _LT_TAGVAR(ld_shlibs, $1)=yes
-    case $host_os in
-      aix3*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-      aix[[4-9]]*)
-        if test "$host_cpu" = ia64; then
-          # On IA64, the linker does run time linking by default, so we don't
-          # have to do anything special.
-          aix_use_runtimelinking=no
-          exp_sym_flag='-Bexport'
-          no_entry_flag=""
-        else
-          aix_use_runtimelinking=no
-
-          # Test if we are trying to use run time linking or normal
-          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
-          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	    for ld_flag in $LDFLAGS; do
-	      case $ld_flag in
-	      *-brtl*)
-	        aix_use_runtimelinking=yes
-	        break
-	        ;;
-	      esac
-	    done
-	    ;;
-          esac
-
-          exp_sym_flag='-bexport'
-          no_entry_flag='-bnoentry'
-        fi
-
-        # When large executables or shared objects are built, AIX ld can
-        # have problems creating the table of contents.  If linking a library
-        # or program results in "error TOC overflow" add -mminimal-toc to
-        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-        _LT_TAGVAR(archive_cmds, $1)=''
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-        if test "$GXX" = yes; then
-          case $host_os in aix4.[[012]]|aix4.[[012]].*)
-          # We only want to do this on AIX 4.2 and lower, the check
-          # below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	    # We have reworked collect2
-	    :
-	  else
-	    # We have old collect2
-	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
-	    # It fails to find uninstalled libraries when the uninstalled
-	    # path is not listed in the libpath.  Setting hardcode_minus_L
-	    # to unsupported forces relinking
-	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-          esac
-          shared_flag='-shared'
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag="$shared_flag "'${wl}-G'
-	  fi
-        else
-          # not using gcc
-          if test "$host_cpu" = ia64; then
-	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	  # chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-          else
-	    if test "$aix_use_runtimelinking" = yes; then
-	      shared_flag='${wl}-G'
-	    else
-	      shared_flag='${wl}-bM:SRE'
-	    fi
-          fi
-        fi
-
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-        # It seems that -bexpall does not export symbols beginning with
-        # underscore (_), so it is better to generate a list of symbols to
-	# export.
-        _LT_TAGVAR(always_export_symbols, $1)=yes
-        if test "$aix_use_runtimelinking" = yes; then
-          # Warning - without using the other runtime loading flags (-brtl),
-          # -berok will link without error, but may produce a broken library.
-          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-          # Determine the default libpath from the value encoded in an empty
-          # executable.
-          _LT_SYS_MODULE_PATH_AIX([$1])
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-        else
-          if test "$host_cpu" = ia64; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-          else
-	    # Determine the default libpath from the value encoded in an
-	    # empty executable.
-	    _LT_SYS_MODULE_PATH_AIX([$1])
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	    # Warning - without using the other run time loading flags,
-	    # -berok will link without error, but may produce a broken library.
-	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    if test "$with_gnu_ld" = yes; then
-	      # We only use this code for GNU lds that support --whole-archive.
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	    else
-	      # Exported symbols can be pulled into shared objects from archives
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	    fi
-	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	    # This is similar to how AIX traditionally builds its shared
-	    # libraries.
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-          fi
-        fi
-        ;;
-
-      beos*)
-	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	  # support --undefined.  This deserves some investigation.  FIXME
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	else
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-
-      chorus*)
-        case $cc_basename in
-          *)
-	  # FIXME: insert proper C++ library support
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	  ;;
-        esac
-        ;;
-
-      cygwin* | mingw* | pw32* | cegcc*)
-	case $GXX,$cc_basename in
-	,cl* | no,cl*)
-	  # Native MSVC
-	  # hardcode_libdir_flag_spec is actually meaningless, as there is
-	  # no search path for DLLs.
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	  _LT_TAGVAR(always_export_symbols, $1)=yes
-	  _LT_TAGVAR(file_list_spec, $1)='@'
-	  # Tell ltmain to make .lib files, not .a files.
-	  libext=lib
-	  # Tell ltmain to make .dll files, not .so files.
-	  shrext_cmds=".dll"
-	  # FIXME: Setting linknames here is a bad hack.
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	    else
-	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	    fi~
-	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	    linknames='
-	  # The linker will not automatically build a static lib if we build a DLL.
-	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-	  # Don't use ranlib
-	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
-	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-	    lt_tool_outputfile="@TOOL_OUTPUT@"~
-	    case $lt_outputfile in
-	      *.exe|*.EXE) ;;
-	      *)
-		lt_outputfile="$lt_outputfile.exe"
-		lt_tool_outputfile="$lt_tool_outputfile.exe"
-		;;
-	    esac~
-	    func_to_tool_file "$lt_outputfile"~
-	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	      $RM "$lt_outputfile.manifest";
-	    fi'
-	  ;;
-	*)
-	  # g++
-	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-	  # as there is no search path for DLLs.
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
-	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	  _LT_TAGVAR(always_export_symbols, $1)=no
-	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	    # If the export-symbols file already is a .def file (1st line
-	    # is EXPORTS), use it as is; otherwise, prepend...
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      cp $export_symbols $output_objdir/$soname.def;
-	    else
-	      echo EXPORTS > $output_objdir/$soname.def;
-	      cat $export_symbols >> $output_objdir/$soname.def;
-	    fi~
-	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	  else
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	  fi
-	  ;;
-	esac
-	;;
-      darwin* | rhapsody*)
-        _LT_DARWIN_LINKER_FEATURES($1)
-	;;
-
-      dgux*)
-        case $cc_basename in
-          ec++*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          ghcx*)
-	    # Green Hills C++ Compiler
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      freebsd2.*)
-        # C++ shared libraries reported to be fairly broken before
-	# switch to ELF
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      freebsd-elf*)
-        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        ;;
-
-      freebsd* | dragonfly*)
-        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-        # conventions
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-        ;;
-
-      gnu*)
-        ;;
-
-      haiku*)
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        ;;
-
-      hpux9*)
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				             # but as the default
-				             # location of the library.
-
-        case $cc_basename in
-          CC*)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          aCC*)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            # Commands to make compiler produce verbose output that lists
-            # what "hidden" libraries, object files and flags are used when
-            # linking a shared library.
-            #
-            # There doesn't appear to be a way to prevent this compiler from
-            # explicitly linking system object files so we need to strip them
-            # from the output so that they don't get included in the library
-            # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-            ;;
-          *)
-            if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            else
-              # FIXME: insert proper C++ library support
-              _LT_TAGVAR(ld_shlibs, $1)=no
-            fi
-            ;;
-        esac
-        ;;
-
-      hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-          case $host_cpu in
-            hppa*64*|ia64*)
-              ;;
-            *)
-	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-              ;;
-          esac
-        fi
-        case $host_cpu in
-          hppa*64*|ia64*)
-            _LT_TAGVAR(hardcode_direct, $1)=no
-            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-            ;;
-          *)
-            _LT_TAGVAR(hardcode_direct, $1)=yes
-            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					         # but as the default
-					         # location of the library.
-            ;;
-        esac
-
-        case $cc_basename in
-          CC*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          aCC*)
-	    case $host_cpu in
-	      hppa*64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	      ia64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	      *)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	    esac
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-	    ;;
-          *)
-	    if test "$GXX" = yes; then
-	      if test $with_gnu_ld = no; then
-	        case $host_cpu in
-	          hppa*64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	          ia64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	          *)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	        esac
-	      fi
-	    else
-	      # FIXME: insert proper C++ library support
-	      _LT_TAGVAR(ld_shlibs, $1)=no
-	    fi
-	    ;;
-        esac
-        ;;
-
-      interix[[3-9]]*)
-	_LT_TAGVAR(hardcode_direct, $1)=no
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-	# Instead, shared libraries are loaded at an image base (0x10000000 by
-	# default) and relocated if they conflict, which is a slow very memory
-	# consuming and fragmenting process.  To avoid this, we pick a random,
-	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	;;
-      irix5* | irix6*)
-        case $cc_basename in
-          CC*)
-	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	    # necessary to make sure instantiated templates are included
-	    # in the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	    ;;
-          *)
-	    if test "$GXX" = yes; then
-	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
-	      fi
-	    fi
-	    _LT_TAGVAR(link_all_deplibs, $1)=yes
-	    ;;
-        esac
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(inherit_rpath, $1)=yes
-        ;;
-
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
-        case $cc_basename in
-          KCC*)
-	    # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	    # KCC will only create a shared library if the output file
-	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
-	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	    ;;
-	  icpc* | ecpc* )
-	    # Intel C++
-	    with_gnu_ld=yes
-	    # version 8.0 and above of icpc choke on multiply defined symbols
-	    # if we add $predep_objects and $postdep_objects, however 7.1 and
-	    # earlier do not add the objects themselves.
-	    case `$CC -V 2>&1` in
-	      *"Version 7."*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-		;;
-	      *)  # Version 8.0 or newer
-	        tmp_idyn=
-	        case $host_cpu in
-		  ia64*) tmp_idyn=' -i_dynamic';;
-		esac
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-		;;
-	    esac
-	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	    ;;
-          pgCC* | pgcpp*)
-            # Portland Group C++ compiler
-	    case `$CC -V` in
-	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
-	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
-	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
-		$RANLIB $oldlib'
-	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-	      ;;
-	    *) # Version 6 and above use weak symbols
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-	      ;;
-	    esac
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-            ;;
-	  cxx*)
-	    # Compaq C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	    runpath_var=LD_RUN_PATH
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
-	    ;;
-	  xl* | mpixl* | bgxl*)
-	    # IBM XL 8.0 on PPC, with GNU ld
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    if test "x$supports_anon_versioning" = xyes; then
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-		echo "local: *; };" >> $output_objdir/$libname.ver~
-		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	    fi
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	      _LT_TAGVAR(compiler_needs_object, $1)=yes
-
-	      # Not sure whether something based on
-	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	      # would be better.
-	      output_verbose_link_cmd='func_echo_all'
-
-	      # Archives containing C++ object files must be created using
-	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	      # necessary to make sure instantiated templates are included
-	      # in the archive.
-	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-
-      lynxos*)
-        # FIXME: insert proper C++ library support
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      m88k*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      mvs*)
-        case $cc_basename in
-          cxx*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-	  *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-	esac
-	;;
-
-      netbsd*)
-        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-	  wlarc=
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	fi
-	# Workaround some broken pre-1.5 toolchains
-	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-	;;
-
-      *nto* | *qnx*)
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-	;;
-
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      openbsd*)
-	if test -f /usr/libexec/ld.so; then
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-	  fi
-	  output_verbose_link_cmd=func_echo_all
-	else
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-
-      osf3* | osf4* | osf5*)
-        case $cc_basename in
-          KCC*)
-	    # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	    # KCC will only create a shared library if the output file
-	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
-	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Archives containing C++ object files must be created using
-	    # the KAI C++ compiler.
-	    case $host in
-	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
-	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
-	    esac
-	    ;;
-          RCC*)
-	    # Rational C++ 2.4.1
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          cxx*)
-	    case $host in
-	      osf3*)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-		;;
-	      *)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
-	          $RM $lib.exp'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-		;;
-	    esac
-
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-	    ;;
-	  *)
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	      case $host in
-	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-		  ;;
-	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-		  ;;
-	      esac
-
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	      # Commands to make compiler produce verbose output that lists
-	      # what "hidden" libraries, object files and flags are used when
-	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-
-	    else
-	      # FIXME: insert proper C++ library support
-	      _LT_TAGVAR(ld_shlibs, $1)=no
-	    fi
-	    ;;
-        esac
-        ;;
-
-      psos*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      sunos4*)
-        case $cc_basename in
-          CC*)
-	    # Sun C++ 4.x
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          lcc*)
-	    # Lucid
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      solaris*)
-        case $cc_basename in
-          CC* | sunCC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
-	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	    case $host_os in
-	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	      *)
-		# The compiler driver will combine and reorder linker options,
-		# but understands `-z linker_flag'.
-	        # Supported since Solaris 2.6 (maybe 2.5.1?)
-		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-	        ;;
-	    esac
-	    _LT_TAGVAR(link_all_deplibs, $1)=yes
-
-	    output_verbose_link_cmd='func_echo_all'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	    # necessary to make sure instantiated templates are included
-	    # in the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	    ;;
-          gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	    # The C++ compiler must be used to create the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	    ;;
-          *)
-	    # GNU C++ compiler with Solaris linker
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	        # Commands to make compiler produce verbose output that lists
-	        # what "hidden" libraries, object files and flags are used when
-	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-	      else
-	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	        # platform.
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	        # Commands to make compiler produce verbose output that lists
-	        # what "hidden" libraries, object files and flags are used when
-	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-	      fi
-
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	      case $host_os in
-		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-		*)
-		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-		  ;;
-	      esac
-	    fi
-	    ;;
-        esac
-        ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      case $cc_basename in
-        CC*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-      esac
-      ;;
-
-      sysv5* | sco3.2v5* | sco5v6*)
-	# Note: We can NOT use -z defs as we might desire, because we do not
-	# link with -lc, and that would cause any symbols used from libc to
-	# always be unresolved, which means just about no library would
-	# ever link correctly.  If we're not using GNU ld we use -z text
-	# though, which does catch some bad symbols but isn't as heavy-handed
-	# as -z defs.
-	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-	_LT_TAGVAR(link_all_deplibs, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-	runpath_var='LD_RUN_PATH'
-
-	case $cc_basename in
-          CC*)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
-	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
-	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
-	      '"$_LT_TAGVAR(reload_cmds, $1)"
-	    ;;
-	  *)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    ;;
-	esac
-      ;;
-
-      tandem*)
-        case $cc_basename in
-          NCC*)
-	    # NonStop-UX NCC 3.20
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      vxworks*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      *)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-    esac
-
-    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-    _LT_TAGVAR(GCC, $1)="$GXX"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  CC=$lt_save_CC
-  CFLAGS=$lt_save_CFLAGS
-  LDCXX=$LD
-  LD=$lt_save_LD
-  GCC=$lt_save_GCC
-  with_gnu_ld=$lt_save_with_gnu_ld
-  lt_cv_path_LDCXX=$lt_cv_path_LD
-  lt_cv_path_LD=$lt_save_path_LD
-  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
-
-AC_LANG_POP
-])# _LT_LANG_CXX_CONFIG
-
-
-# _LT_FUNC_STRIPNAME_CNF
-# ----------------------
-# func_stripname_cnf prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-#
-# This function is identical to the (non-XSI) version of func_stripname,
-# except this one can be used by m4 code that may be executed by configure,
-# rather than the libtool script.
-m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
-AC_REQUIRE([_LT_DECL_SED])
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
-func_stripname_cnf ()
-{
-  case ${2} in
-  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-  esac
-} # func_stripname_cnf
-])# _LT_FUNC_STRIPNAME_CNF
-
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
-# Dependencies to place before and after the object being linked:
-_LT_TAGVAR(predep_objects, $1)=
-_LT_TAGVAR(postdep_objects, $1)=
-_LT_TAGVAR(predeps, $1)=
-_LT_TAGVAR(postdeps, $1)=
-_LT_TAGVAR(compiler_lib_search_path, $1)=
-
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
-int a;
-void foo (void) { a = 0; }
-_LT_EOF
-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-_LT_EOF
-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-_LT_EOF
-], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
-package foo
-func foo() {
-}
-_LT_EOF
-])
-
-_lt_libdeps_save_CFLAGS=$CFLAGS
-case "$CC $CFLAGS " in #(
-*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
-*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
-*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
-esac
-
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  for p in `eval "$output_verbose_link_cmd"`; do
-    case ${prev}${p} in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
-	 prev=$p
-	 continue
-       fi
-
-       # Expand the sysroot to ease extracting the directories later.
-       if test -z "$prev"; then
-         case $p in
-         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
-         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
-         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
-         esac
-       fi
-       case $p in
-       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
-       esac
-       if test "$pre_test_object_deps_done" = no; then
-	 case ${prev} in
-	 -L | -R)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
-	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       prev=
-       ;;
-
-    *.lto.$objext) ;; # Ignore GCC LTO objects
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
-	   _LT_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
-	   _LT_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$RM -f confest.$objext
-CFLAGS=$_lt_libdeps_save_CFLAGS
-
-# PORTME: override above test on systems where it is broken
-m4_if([$1], [CXX],
-[case $host_os in
-interix[[3-9]]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_TAGVAR(predep_objects,$1)=
-  _LT_TAGVAR(postdep_objects,$1)=
-  _LT_TAGVAR(postdeps,$1)=
-  ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC* | sunCC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-])
-
-case " $_LT_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
-    [The directories searched by this compiler when creating a shared library])
-_LT_TAGDECL([], [predep_objects], [1],
-    [Dependencies to place before and after the objects being linked to
-    create a shared library])
-_LT_TAGDECL([], [postdep_objects], [1])
-_LT_TAGDECL([], [predeps], [1])
-_LT_TAGDECL([], [postdeps], [1])
-_LT_TAGDECL([], [compiler_lib_search_path], [1],
-    [The library search path used internally by the compiler when linking
-    a shared library])
-])# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_F77_CONFIG],
-[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the F77 compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  lt_save_CFLAGS=$CFLAGS
-  CC=${F77-"f77"}
-  CFLAGS=$FFLAGS
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-  GCC=$G77
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
-	fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$G77"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-  CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
-
-AC_LANG_POP
-])# _LT_LANG_F77_CONFIG
-
-
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_FC_CONFIG],
-[AC_LANG_PUSH(Fortran)
-
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for fc test sources.
-ac_ext=${ac_fc_srcext-f}
-
-# Object file extension for compiled fc test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the FC compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  lt_save_CFLAGS=$CFLAGS
-  CC=${FC-"f95"}
-  CFLAGS=$FCFLAGS
-  compiler=$CC
-  GCC=$ac_cv_fc_compiler_gnu
-
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
-	fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC=$lt_save_CC
-  CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
-
-AC_LANG_POP
-])# _LT_LANG_FC_CONFIG
-
-
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GCJ_CONFIG],
-[AC_REQUIRE([LT_PROG_GCJ])dnl
-AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GCJ-"gcj"}
-CFLAGS=$GCJFLAGS
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-
-  _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_GCJ_CONFIG
-
-
-# _LT_LANG_GO_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Go compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GO_CONFIG],
-[AC_REQUIRE([LT_PROG_GO])dnl
-AC_LANG_SAVE
-
-# Source file extension for Go test sources.
-ac_ext=go
-
-# Object file extension for compiled Go test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="package main; func main() { }"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='package main; func main() { }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GOC-"gccgo"}
-CFLAGS=$GOFLAGS
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# Go did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-
-  _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_GO_CONFIG
-
-
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_RC_CONFIG],
-[AC_REQUIRE([LT_PROG_RC])dnl
-AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=
-CC=${RC-"windres"}
-CFLAGS=
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-if test -n "$compiler"; then
-  :
-  _LT_CONFIG($1)
-fi
-
-GCC=$lt_save_GCC
-AC_LANG_RESTORE
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_RC_CONFIG
-
-
-# LT_PROG_GCJ
-# -----------
-AC_DEFUN([LT_PROG_GCJ],
-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
-  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
-    [AC_CHECK_TOOL(GCJ, gcj,)
-      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-      AC_SUBST(GCJFLAGS)])])[]dnl
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
-
-
-# LT_PROG_GO
-# ----------
-AC_DEFUN([LT_PROG_GO],
-[AC_CHECK_TOOL(GOC, gccgo,)
-])
-
-
-# LT_PROG_RC
-# ----------
-AC_DEFUN([LT_PROG_RC],
-[AC_CHECK_TOOL(RC, windres,)
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_RC], [])
-
-
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_EGREP],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_REQUIRE([AC_PROG_FGREP])dnl
-test -z "$GREP" && GREP=grep
-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
-_LT_DECL([], [EGREP], [1], [An ERE matcher])
-_LT_DECL([], [FGREP], [1], [A literal string matcher])
-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
-AC_SUBST([GREP])
-])
-
-
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_OBJDUMP],
-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
-AC_SUBST([OBJDUMP])
-])
-
-# _LT_DECL_DLLTOOL
-# ----------------
-# Ensure DLLTOOL variable is set.
-m4_defun([_LT_DECL_DLLTOOL],
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
-AC_SUBST([DLLTOOL])
-])
-
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-m4_defun([_LT_DECL_SED],
-[AC_PROG_SED
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
-    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
-])# _LT_DECL_SED
-
-m4_ifndef([AC_PROG_SED], [
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-
-m4_defun([AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])#AC_PROG_SED
-])#m4_ifndef
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_SED], [])
-
-
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  lt_unset=unset
-else
-  lt_unset=false
-fi
-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  lt_SP2NL='tr \040 \012'
-  lt_NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  lt_SP2NL='tr \100 \n'
-  lt_NL2SP='tr \r\n \100\100'
-  ;;
-esac
-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
-])# _LT_CHECK_SHELL_FEATURES
-
-
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac])
-
-  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
-    func_basename_result="${1##*/}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac
-    func_basename_result="${1##*/}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
-    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-    # positional parameters, so assign one to ordinary parameter first.
-    func_stripname_result=${3}
-    func_stripname_result=${func_stripname_result#"${1}"}
-    func_stripname_result=${func_stripname_result%"${2}"}])
-
-  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
-    func_split_long_opt_name=${1%%=*}
-    func_split_long_opt_arg=${1#*=}])
-
-  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
-    func_split_short_opt_arg=${1#??}
-    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
-  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
-    case ${1} in
-      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-      *)    func_lo2o_result=${1} ;;
-    esac])
-
-  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
-
-  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
-
-  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
-    func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
-    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
-# _LT_PATH_CONVERSION_FUNCTIONS
-# -----------------------------
-# Determine which file name conversion functions should be used by
-# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
-# for certain cross-compile configurations and native mingw.
-m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_MSG_CHECKING([how to convert $build file names to $host format])
-AC_CACHE_VAL(lt_cv_to_host_file_cmd,
-[case $host in
-  *-*-mingw* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
-        ;;
-      *-*-cygwin* )
-        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
-        ;;
-      * ) # otherwise, assume *nix
-        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
-        ;;
-    esac
-    ;;
-  *-*-cygwin* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
-        ;;
-      *-*-cygwin* )
-        lt_cv_to_host_file_cmd=func_convert_file_noop
-        ;;
-      * ) # otherwise, assume *nix
-        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
-        ;;
-    esac
-    ;;
-  * ) # unhandled hosts (and "normal" native builds)
-    lt_cv_to_host_file_cmd=func_convert_file_noop
-    ;;
-esac
-])
-to_host_file_cmd=$lt_cv_to_host_file_cmd
-AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
-_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
-         [0], [convert $build file names to $host format])dnl
-
-AC_MSG_CHECKING([how to convert $build file names to toolchain format])
-AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
-[#assume ordinary cross tools, or native build.
-lt_cv_to_tool_file_cmd=func_convert_file_noop
-case $host in
-  *-*-mingw* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
-        ;;
-    esac
-    ;;
-esac
-])
-to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
-_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
-         [0], [convert $build files to toolchain format])dnl
-])# _LT_PATH_CONVERSION_FUNCTIONS
-
-# Helper functions for option handling.                    -*- Autoconf -*-
-#
-#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-#   Inc.
-#   Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 7 ltoptions.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
-
-
-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
-# ------------------------------------------
-m4_define([_LT_MANGLE_OPTION],
-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
-
-
-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
-# ---------------------------------------
-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
-# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
-# saved as a flag.
-m4_define([_LT_SET_OPTION],
-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
-        _LT_MANGLE_DEFUN([$1], [$2]),
-    [m4_warning([Unknown $1 option `$2'])])[]dnl
-])
-
-
-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
-# ------------------------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-m4_define([_LT_IF_OPTION],
-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
-
-
-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
-# -------------------------------------------------------
-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
-# are set.
-m4_define([_LT_UNLESS_OPTIONS],
-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
-		      [m4_define([$0_found])])])[]dnl
-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
-])[]dnl
-])
-
-
-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
-# ----------------------------------------
-# OPTION-LIST is a space-separated list of Libtool options associated
-# with MACRO-NAME.  If any OPTION has a matching handler declared with
-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
-# the unknown option and exit.
-m4_defun([_LT_SET_OPTIONS],
-[# Set options
-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-    [_LT_SET_OPTION([$1], _LT_Option)])
-
-m4_if([$1],[LT_INIT],[
-  dnl
-  dnl Simply set some default values (i.e off) if boolean options were not
-  dnl specified:
-  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
-  ])
-  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
-  ])
-  dnl
-  dnl If no reference was made to various pairs of opposing options, then
-  dnl we run the default mode handler for the pair.  For example, if neither
-  dnl `shared' nor `disable-shared' was passed, we enable building of shared
-  dnl archives by default:
-  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
-  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
-  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
-  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
-  		   [_LT_ENABLE_FAST_INSTALL])
-  ])
-])# _LT_SET_OPTIONS
-
-
-
-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
-# -----------------------------------------
-m4_define([_LT_MANGLE_DEFUN],
-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
-
-
-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
-# -----------------------------------------------
-m4_define([LT_OPTION_DEFINE],
-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
-])# LT_OPTION_DEFINE
-
-
-# dlopen
-# ------
-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
-])
-
-AU_DEFUN([AC_LIBTOOL_DLOPEN],
-[_LT_SET_OPTION([LT_INIT], [dlopen])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
-
-
-# win32-dll
-# ---------
-# Declare package support for building win32 dll's.
-LT_OPTION_DEFINE([LT_INIT], [win32-dll],
-[enable_win32_dll=yes
-
-case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-esac
-
-test -z "$AS" && AS=as
-_LT_DECL([], [AS],      [1], [Assembler program])dnl
-
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
-])# win32-dll
-
-AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-_LT_SET_OPTION([LT_INIT], [win32-dll])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
-
-
-# _LT_ENABLE_SHARED([DEFAULT])
-# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_SHARED],
-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([shared],
-    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
-
-    _LT_DECL([build_libtool_libs], [enable_shared], [0],
-	[Whether or not to build shared libraries])
-])# _LT_ENABLE_SHARED
-
-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
-])
-
-AC_DEFUN([AC_DISABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], [disable-shared])
-])
-
-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_SHARED], [])
-dnl AC_DEFUN([AM_DISABLE_SHARED], [])
-
-
-
-# _LT_ENABLE_STATIC([DEFAULT])
-# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_STATIC],
-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([static],
-    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
-
-    _LT_DECL([build_old_libs], [enable_static], [0],
-	[Whether or not to build static libraries])
-])# _LT_ENABLE_STATIC
-
-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
-])
-
-AC_DEFUN([AC_DISABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], [disable-static])
-])
-
-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_STATIC], [])
-dnl AC_DEFUN([AM_DISABLE_STATIC], [])
-
-
-
-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
-# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_FAST_INSTALL],
-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([fast-install],
-    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
-
-_LT_DECL([fast_install], [enable_fast_install], [0],
-	 [Whether or not to optimize for fast installation])dnl
-])# _LT_ENABLE_FAST_INSTALL
-
-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
-
-# Old names:
-AU_DEFUN([AC_ENABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
-])
-
-AU_DEFUN([AC_DISABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
-
-
-# _LT_WITH_PIC([MODE])
-# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
-# LT_INIT options.
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-m4_define([_LT_WITH_PIC],
-[AC_ARG_WITH([pic],
-    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [lt_p=${PACKAGE-default}
-    case $withval in
-    yes|no) pic_mode=$withval ;;
-    *)
-      pic_mode=default
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for lt_pkg in $withval; do
-	IFS="$lt_save_ifs"
-	if test "X$lt_pkg" = "X$lt_p"; then
-	  pic_mode=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
-
-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
-])# _LT_WITH_PIC
-
-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
-
-# Old name:
-AU_DEFUN([AC_LIBTOOL_PICMODE],
-[_LT_SET_OPTION([LT_INIT], [pic-only])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
-
-
-m4_define([_LTDL_MODE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
-		 [m4_define([_LTDL_MODE], [nonrecursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [recursive],
-		 [m4_define([_LTDL_MODE], [recursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [subproject],
-		 [m4_define([_LTDL_MODE], [subproject])])
-
-m4_define([_LTDL_TYPE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [installable],
-		 [m4_define([_LTDL_TYPE], [installable])])
-LT_OPTION_DEFINE([LTDL_INIT], [convenience],
-		 [m4_define([_LTDL_TYPE], [convenience])])
-
-# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltsugar.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
-
-
-# lt_join(SEP, ARG1, [ARG2...])
-# -----------------------------
-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
-# associated separator.
-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
-# versions in m4sugar had bugs.
-m4_define([lt_join],
-[m4_if([$#], [1], [],
-       [$#], [2], [[$2]],
-       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
-m4_define([_lt_join],
-[m4_if([$#$2], [2], [],
-       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
-
-
-# lt_car(LIST)
-# lt_cdr(LIST)
-# ------------
-# Manipulate m4 lists.
-# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
-m4_define([lt_car], [[$1]])
-m4_define([lt_cdr],
-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
-       [$#], 1, [],
-       [m4_dquote(m4_shift($@))])])
-m4_define([lt_unquote], $1)
-
-
-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
-# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
-# Note that neither SEPARATOR nor STRING are expanded; they are appended
-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
-# than defined and empty).
-#
-# This macro is needed until we can rely on Autoconf 2.62, since earlier
-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
-m4_define([lt_append],
-[m4_define([$1],
-	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
-
-
-
-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
-# ----------------------------------------------------------
-# Produce a SEP delimited list of all paired combinations of elements of
-# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
-# has the form PREFIXmINFIXSUFFIXn.
-# Needed until we can rely on m4_combine added in Autoconf 2.62.
-m4_define([lt_combine],
-[m4_if(m4_eval([$# > 3]), [1],
-       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
-[[m4_foreach([_Lt_prefix], [$2],
-	     [m4_foreach([_Lt_suffix],
-		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
-	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
-
-
-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
-# -----------------------------------------------------------------------
-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
-m4_define([lt_if_append_uniq],
-[m4_ifdef([$1],
-	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
-		 [lt_append([$1], [$2], [$3])$4],
-		 [$5])],
-	  [lt_append([$1], [$2], [$3])$4])])
-
-
-# lt_dict_add(DICT, KEY, VALUE)
-# -----------------------------
-m4_define([lt_dict_add],
-[m4_define([$1($2)], [$3])])
-
-
-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
-# --------------------------------------------
-m4_define([lt_dict_add_subkey],
-[m4_define([$1($2:$3)], [$4])])
-
-
-# lt_dict_fetch(DICT, KEY, [SUBKEY])
-# ----------------------------------
-m4_define([lt_dict_fetch],
-[m4_ifval([$3],
-	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
-    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
-
-
-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
-# -----------------------------------------------------------------
-m4_define([lt_if_dict_fetch],
-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
-	[$5],
-    [$6])])
-
-
-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
-# --------------------------------------------------------------
-m4_define([lt_dict_filter],
-[m4_if([$5], [], [],
-  [lt_join(m4_quote(m4_default([$4], [[, ]])),
-           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
-		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
-])
-
-# ltversion.m4 -- version numbers			-*- Autoconf -*-
-#
-#   Copyright (C) 2004 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# @configure_input@
-
-# serial 3337 ltversion.m4
-# This file is part of GNU Libtool
-
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
-
-AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
-_LT_DECL(, macro_revision, 0)
-])
-
-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
-#
-#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004.
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 5 lt~obsolete.m4
-
-# These exist entirely to fool aclocal when bootstrapping libtool.
-#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
-# which have later been changed to m4_define as they aren't part of the
-# exported API, or moved to Autoconf or Automake where they belong.
-#
-# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
-# using a macro with the same name in our local m4/libtool.m4 it'll
-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
-# and doesn't know about Autoconf macros at all.)
-#
-# So we provide this file, which has a silly filename so it's always
-# included after everything else.  This provides aclocal with the
-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
-# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
-#
-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
-# Yes, that means every name once taken will need to remain here until
-# we give up compatibility with versions before 1.7, at which point
-# we need to keep only those names which we still refer to.
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
-
-m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
-m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
-m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
-m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
-m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
-m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
-m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
-m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
-m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
-m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
-m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
-m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
-m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
-m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
-m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
-m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
-m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
-m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
-m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
-m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
-m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
-m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
-m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
-m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
-m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
-m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
-m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
-m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
-m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
-m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
-m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
-m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
-m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
-m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
-m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
-m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
-m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
-m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
-m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
-
diff --git a/acsite.m4 b/acsite.m4
index eaab535..b144962 100644
--- a/acsite.m4
+++ b/acsite.m4
@@ -53,87 +53,3 @@ esac
 rm -rf conftest*[]dnl
 ])# _AC_SYS_LARGEFILE_MACRO_VALUE
 
-dnl -------------------------------------------------------------------------
-dnl AC_F9X_MODS()
-dnl
-dnl	Check how F9X handles modules. This macro also checks which
-dnl	command-line option to use to include the module once it's built.
-dnl
-AC_DEFUN(AC_F9X_MODS,
-[AC_MSG_CHECKING(what $FC does with modules)
-AC_LANG_PUSH(Fortran)
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-      module module
-         integer foo
-      end module module
-EOF
-
-eval $ac_compile
-modfiles=""
-F9XMODEXT=""
-
-for f in conftest.o module.mod MODULE.mod module.M MODULE.M; do
-  if test -f "$f" ; then
-    modfiles="$f"
-
-    case "$f" in
-      *.o)   F9XMODEXT="o" ;;
-      *.mod) F9XMODEXT="mod" ;;
-      *.M)   F9XMODEXT="M" ;;
-    esac
-  fi
-done
-
-echo $modfiles 6>&1
-if test "$modfiles" = file.o; then
-  echo $ac_n "checking whether $FC -em is saner""... $ac_c" 1>&6
-  OLD_FCFLAGS=$FCFLAGS
-  FCFLAGS="$FCFLAGS -em"
-  eval $ac_compile
-  modfiles=""
-  for f in file.o module.mod MODULE.mod module.M MODULE.M; do
-    test -f $f && modfiles="$f"
-  done
-  if test "$modfiles" = "file.o"; then
-    FCFLAGS=$OLD_FCFLAGS
-    echo no 6>&1
-  else
-    echo yes 6>&1
-  fi
-fi
-cd ..
-
-AC_MSG_CHECKING(how $FC finds modules)
-
-for flag in "-I" "-M" "-p"; do
-  cat >conftest.$ac_ext <<EOF
-      program conftest
-          use module
-      end program conftest
-EOF
-
-  ac_compile='${FC-f90} $FCFLAGS ${flag}conftestdir -c conftest.$ac_ext 1>&AS_MESSAGE_LOG_FD'
-
-  if AC_TRY_EVAL(ac_compile); then
-    F9XMODFLAG=$flag
-    break
-  fi
-done
-
-if test -n "$F9XMODFLAG"; then
-  echo $F9XMODFLAG 1>&6
-  FCFLAGS="$F9XMODFLAG. $FCFLAGS"
-else
-  echo unknown 1>&6
-fi
-AC_SUBST(F9XMODFLAG)
-AC_SUBST(F9XMODEXT)
-rm -rf conftest*
-AC_LANG_POP(Fortran)
-])
-
diff --git a/autogen.sh b/autogen.sh
new file mode 100755
index 0000000..237e1b1
--- /dev/null
+++ b/autogen.sh
@@ -0,0 +1,459 @@
+#! /bin/sh
+#
+# Copyright by The HDF Group.                                              
+# All rights reserved.                                                     
+#                                                                          
+# This file is part of HDF5. The full HDF5 copyright notice, including     
+# terms governing use, modification, and redistribution, is contained in   
+# the files COPYING and Copyright.html.  COPYING can be found at the root  
+# of the source code distribution tree; Copyright.html can be found at the 
+# root level of an installed copy of the electronic document set and is    
+# linked from the top-level documents page.  It can also be found at       
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have access  
+# to either file, you may request a copy from help@hdfgroup.org.           
+#
+
+# A script to reconfigure autotools for HDF5, and to recreate other
+# generated files specifc to HDF5.
+#
+# IMPORTANT OS X NOTE
+#
+# If you are using OS X, you will probably not have the autotools
+# installed, even if you have the Xcode command-line tools. The
+# bison version you have installed may also have a bug that makes
+# it unable to process our input files.
+#
+# The easiest way to fix this is to install everything via Homebrew:
+#
+#   http://brew.sh/
+#
+# After you install the base packages, install autoconf, automake,
+# libtool, and flex/bison.
+#
+#   brew install autoconf
+#   brew install automake
+#   brew install libtool
+#   brew install flex
+#   brew install bison
+#
+# This only takes a few minutes. Note that libtool and libtoolize will
+# be glibtool and glibtoolize so as not to conflict with Apple's non-gnu
+# tools. This autogen.sh script handles this for you.
+#
+# END IMPORTANT OS X NOTE
+#
+# If you want to use a particular version of the autotools, the paths
+# to each tool can be overridden using the following environment
+# variables:
+#
+#   HDF5_ACLOCAL
+#   HDF5_AUTOHEADER
+#   HDF5_AUTOMAKE
+#   HDF5_AUTOCONF
+#   HDF5_LIBTOOL
+#   HDF5_M4
+#   HDF5_FLEX
+#   HDF5_BISON
+#
+# Note that aclocal will attempt to include libtool's share/aclocal
+# directory.
+#
+# This script takes two potential options:
+#
+# -p, --production
+#
+# When this is selected, the autotools versions are set to the paths
+# and versions used by The HDF Group to produce the released versions
+# of the library.
+#
+# NOTE: This is probably temporary. Once we update our dev machines
+# to have recent versions of the autotools this option will probably
+# be removed.
+#
+# -v, --verbose
+#
+# This emits some extra information, mainly tool versions.
+
+echo
+echo "**************************"
+echo "* HDF5 autogen.sh script *"
+echo "**************************"
+echo
+
+# Default is not production
+production=false
+
+# Default is not verbose output
+verbose=false
+
+optspec=":hpv-"
+while getopts "$optspec" optchar; do
+    case "${optchar}" in
+    -)
+        case "${OPTARG}" in
+            production)
+                echo "Setting production mode..."
+                echo
+                production=true
+                ;;
+            verbose)
+                echo "Setting verbosity: high"
+                echo
+                verbose=true
+                ;;
+            *)
+                if [ "$OPTERR" = 1 ] && [ "${optspec:0:1}" != ":" ]; then
+                    echo "Unknown option --${OPTARG}" >&2
+                fi
+                ;;
+        esac;;
+    h)
+        echo "usage: $0 [-p|--production]"
+        echo
+        echo "      -p      Used by THG to ensure that particular versions"
+        echo "              of the autotools are used and hard-codes"
+        echo "              autotools paths to THG machines. Not for"
+        echo "              non-HDF-Group users!"
+        echo
+        echo "  NOTE: Each autotool can be set via an environment variable."
+        echo "        These are documented inside this autogen.sh script."
+        echo
+        exit 0
+        ;;
+    p)
+        echo "Setting production mode..."
+        echo
+        production=true
+        ;;
+    v)
+        echo "Setting verbosity: high"
+        echo
+        verbose=true
+        ;;
+    *)
+        if [ "$OPTERR" != 1 ] || [ "${optspec:0:1}" = ":" ]; then
+            echo "Non-option argument: '-${OPTARG}'" >&2
+        fi
+        ;;
+    esac
+done
+
+if [ "$production" = true ] ; then
+
+    # Production mode
+    #
+    # Hard-code canonical HDF Group tool locations and ensure
+    # version numbers are correct.
+
+    # Production versions of the tools
+    AUTOCONF_VERSION="autoconf (GNU Autoconf) 2.69"
+    AUTOMAKE_VERSION="automake (GNU automake) 1.14.1"
+    AUTOHEADER_VERSION="autoheader (GNU Autoconf) 2.69"
+    ACLOCAL_VERSION="aclocal (GNU automake) 1.14.1"
+    LIBTOOL_VERSION="(GNU libtool) 2.4.2"
+    M4_VERSION="m4 (GNU M4) 1.4.17"
+    BISON_VERSION="bison (GNU Bison) 2.7"
+    FLEX_VERSION="flex 2.5.37"
+
+    # If paths to tools are not specified, assume they are
+    # located in /mnt/hdf/packages and set paths accordingly.
+    if test -z ${HDF5_AUTOCONF}; then
+        HDF5_AUTOCONF=/mnt/hdf/packages/autoconf/autoconf-2.69/bin/autoconf
+    fi
+    if test -z ${HDF5_AUTOMAKE}; then
+        HDF5_AUTOMAKE=/mnt/hdf/packages/automake/automake-1.14.1/bin/automake-1.14
+    fi
+    if test -z ${HDF5_AUTOHEADER}; then
+        HDF5_AUTOHEADER=/mnt/hdf/packages/autoconf/autoconf-2.69/bin/autoheader
+    fi
+    if test -z ${HDF5_ACLOCAL}; then
+        HDF5_ACLOCAL=/mnt/hdf/packages/automake/automake-1.14.1/bin/aclocal-1.14
+    fi
+    if test -z ${HDF5_LIBTOOL}; then
+        HDF5_LIBTOOL=/mnt/hdf/packages/libtool/libtool-2.4.2/bin/libtool
+    fi
+    if test -z ${HDF5_M4}; then
+        HDF5_M4=/mnt/hdf/packages/m4/m4-1.4.17/bin/m4
+    fi
+    if test -z ${HDF5_BISON}; then
+        HDF5_BISON=/usr/hdf/bin/bison
+    fi
+    if test -z ${HDF5_FLEX}; then
+        HDF5_FLEX=/usr/hdf/bin/flex
+    fi
+
+    # Check version numbers of all autotools against the "correct" versions
+    AC_VERS=`${HDF5_AUTOCONF} --version 2>&1 | grep "^${AUTOCONF_VERSION}"`
+    if test -z "${AC_VERS}"; then
+        echo "${HDF5_AUTOCONF} version is not ${AUTOCONF_VERSION}"
+        ${HDF5_AUTOCONF} --version
+        exit 1
+    fi
+    AM_VERS=`${HDF5_AUTOMAKE} --version 2>&1 | grep "^${AUTOMAKE_VERSION}"`
+    if test -z "${AM_VERS}"; then
+       echo "${HDF5_AUTOMAKE} version is not ${AUTOMAKE_VERSION}"
+       ${HDF5_AUTOMAKE} --version
+       exit 1
+    fi
+    AH_VERS=`${HDF5_AUTOHEADER} --version 2>&1 | grep "^${AUTOHEADER_VERSION}"`
+    if test -z "${AH_VERS}"; then
+        echo "${HDF5_AUTOHEADER} version is not ${AUTOHEADER_VERSION}"
+        ${HDF5_AUTOHEADER} --version
+        exit 1
+    fi
+    AL_VERS=`${HDF5_ACLOCAL} --version 2>&1 | grep "^${ACLOCAL_VERSION}"`
+    if test -z "${AL_VERS}"; then
+        echo "${HDF5_ACLOCAL} version is not ${ACLOCAL_VERSION}"
+        ${HDF5_ACLOCAL} --version
+        exit 1
+    fi
+    LT_VERS=`${HDF5_LIBTOOL} --version 2>&1 | grep "${LIBTOOL_VERSION}"`
+    if test -z "${LT_VERS}"; then
+        echo "${HDF5_LIBTOOL} version is not ${LIBTOOL_VERSION}"
+        ${HDF5_LIBTOOL} --version
+        exit 1
+    fi
+    M4_VERS=`${HDF5_M4} --version 2>&1 | grep "${M4_VERSION}"`
+    if test -z "${M4_VERS}"; then
+        echo "${HDF5_M4} version is not ${M4_VERSION}"
+        ${HDF5_M4} --version
+        exit 1
+    fi
+    BI_VERS=`${HDF5_BISON} --version 2>&1 | grep "^${BISON_VERSION}"`
+    if test -z "${BI_VERS}"; then
+       echo "${HDF5_BISON} version is not ${BISON_VERSION}"
+       exit 1
+    fi
+    FL_VERS=`${HDF5_FLEX} --version 2>&1 | grep "^${FLEX_VERSION}"`
+    if test -z "${FL_VERS}"; then
+       echo "${HDF5_FLEX} version is not ${FLEX_VERSION}"
+       exit 1
+    fi
+
+else
+
+    # Not in production mode
+    #
+    # If paths to autotools are not specified, use whatever the system
+    # has installed as the default. We use 'which <tool>' to
+    # show exactly what's being used.
+    if test -z ${HDF5_AUTOCONF}; then
+        HDF5_AUTOCONF=$(which autoconf)
+    fi
+    if test -z ${HDF5_AUTOMAKE}; then
+        HDF5_AUTOMAKE=$(which automake)
+    fi
+    if test -z ${HDF5_AUTOHEADER}; then
+        HDF5_AUTOHEADER=$(which autoheader)
+    fi
+    if test -z ${HDF5_ACLOCAL}; then
+        HDF5_ACLOCAL=$(which aclocal)
+    fi
+    if test -z ${HDF5_LIBTOOL}; then
+        case "`uname`" in
+        Darwin*)
+            # libtool on OS-X is non-gnu
+            HDF5_LIBTOOL=$(which glibtool)
+            ;;
+        *)
+            HDF5_LIBTOOL=$(which libtool)
+            ;;
+        esac
+    fi
+    if test -z ${HDF5_M4}; then
+        HDF5_M4=$(which m4)
+    fi
+    if test -z ${HDF5_BISON}; then
+        HDF5_BISON=$(which bison)
+    fi
+    if test -z ${HDF5_FLEX}; then
+        HDF5_FLEX=$(which flex)
+    fi
+
+fi # production
+
+
+# Make sure that these versions of the autotools are in the path
+AUTOCONF_DIR=`dirname ${HDF5_AUTOCONF}`
+LIBTOOL_DIR=`dirname ${HDF5_LIBTOOL}`
+M4_DIR=`dirname ${HDF5_M4}`
+BISON_DIR=`dirname ${HDF5_BISON}`
+FLEX_DIR=`dirname ${HDF5_FLEX}`
+PATH=${AUTOCONF_DIR}:${LIBTOOL_DIR}:${M4_DIR}:${FLEX_DIR}:${BISON_DIR}:$PATH
+
+# Make libtoolize match the specified libtool
+case "`uname`" in
+Darwin*)
+    # On OS X, libtoolize could be named glibtoolize or
+    # libtoolize. Try the former first, then fall back
+    # to the latter if it's not found.
+    HDF5_LIBTOOLIZE="${LIBTOOL_DIR}/glibtoolize"
+    if [ ! -f $HDF5_LIBTOOLIZE ] ; then
+        HDF5_LIBTOOLIZE="${LIBTOOL_DIR}/libtoolize"
+    fi
+    ;;
+*)
+    HDF5_LIBTOOLIZE="${LIBTOOL_DIR}/libtoolize"
+    ;;
+esac
+
+# Run autotools in order
+#
+# When available, we use the --force option to ensure all files are
+# updated. This prevents the autotools from re-running to fix dependencies
+# during the 'make' step, which can be a problem if environment variables
+# were set on the command line during autogen invocation.
+
+# Some versions of libtoolize will suggest that we add ACLOCAL_AMFLAGS
+# = '-I m4'. This is already done in commence.am, which is included
+# in Makefile.am. You can ignore this suggestion.
+
+# LIBTOOLIZE
+libtoolize_cmd="${HDF5_LIBTOOLIZE} --copy --force"
+echo ${libtoolize_cmd}
+if [ "$verbose" = true ] ; then
+    ${HDF5_LIBTOOLIZE} --version
+fi
+${libtoolize_cmd} || exit 1
+echo
+echo "NOTE: You can ignore the warning about adding -I m4."
+echo "      We already do this in an included file."
+echo
+
+# ACLOCAL
+if test -e "${LIBTOOL_DIR}/../share/aclocal" ; then
+    aclocal_include="-I ${LIBTOOL_DIR}/../share/aclocal"
+fi
+aclocal_cmd="${HDF5_ACLOCAL} --force -I m4 ${aclocal_include}"
+echo ${aclocal_cmd}
+if [ "$verbose" = true ] ; then
+    ${HDF5_ACLOCAL} --version
+fi
+${aclocal_cmd} || exit 1
+echo
+
+# AUTOHEADER
+autoheader_cmd="${HDF5_AUTOHEADER} --force"
+echo ${autoheader_cmd}
+if [ "$verbose" = true ] ; then
+    ${HDF5_AUTOHEADER} --version
+fi
+${autoheader_cmd} || exit 1
+echo
+
+# AUTOMAKE
+automake_cmd="${HDF5_AUTOMAKE} --copy --add-missing --force-missing"
+echo ${automake_cmd}
+if [ "$verbose" = true ] ; then
+    ${HDF5_AUTOMAKE} --version
+fi
+${automake_cmd} || exit 1
+echo
+
+# AUTOCONF
+autoconf_cmd="${HDF5_AUTOCONF} --force"
+echo ${autoconf_cmd}
+if [ "$verbose" = true ] ; then
+    ${HDF5_AUTOCONF} --version
+fi
+${autoconf_cmd} || exit 1
+echo
+
+# Run scripts that process source.
+
+# Run trace script
+# The trace script adds H5TRACE macros to library source files.  It should
+# have no effect on files that don't have HDF5 API macros in them.
+echo
+echo "Running trace script:"
+bin/trace src/H5*.c || exit 1
+
+# Run make_err
+# make_err automatically generates the H5E headers that create error message
+# types for HDF5.
+echo
+echo "Running error generation script:"
+bin/make_err src/H5err.txt || exit 1
+
+# Run make_vers
+# make_vers automatically generates the public headers that define the API version
+# macros for HDF5.
+echo
+echo "Running API version generation script:"
+bin/make_vers src/H5vers.txt || exit 1
+
+# Run make_overflow
+# make_overflow automatically generates macros for detecting overflows for type
+# conversion.
+echo
+echo "Running overflow macro generation script:"
+bin/make_overflow src/H5overflow.txt || exit 1
+
+# Run flex and bison
+# automatically generates hl/src/H5LTanalyze.c and hl/src/H5LTparse.c
+# Note that, as of Xcode 6.1 (2015), the default bison version on OS X
+# is old enough to have the circular dependency bug. You'll have
+# to install a later version of bison. See the OS X note at the top
+# of this script.
+echo
+echo "Running flex/bison:"
+cd hl/src
+echo "Generate hl/src/H5LTparse.c from hl/src/H5LTparse.y"
+if [ "$verbose" = true ] ; then
+    ${HDF5_BISON} --version
+fi
+${HDF5_BISON} -pH5LTyy -o H5LTparse.c -d H5LTparse.y
+
+echo "Generate hl/src/H5LTanalyze.c from hl/src/H5LTanalyze.l"
+if [ "$verbose" = true ] ; then
+    ${HDF5_FLEX} --version
+fi
+${HDF5_FLEX} --nounistd -PH5LTyy -o H5LTanalyze.c H5LTanalyze.l
+
+# fix H5LTparse.c to declare H5LTyyparse return type as an hid_t
+# instead of int.  Currently the generated function H5LTyyparse is
+# generated with a return value of type int, which is a mapping to the
+# flex yyparse function.  The return value in the HL library should be
+# an hid_t. 
+# I propose to not use flex to generate this function, but for now I am 
+# adding a perl command to find and replace this function declaration in
+# H5LTparse.c.
+perl -0777 -pi -e 's/int\nyyparse/hid_t\nyyparse/igs' H5LTparse.c
+perl -0777 -pi -e 's/int H5LTyyparse/hid_t H5LTyyparse/igs' H5LTparse.c
+
+# Add code that disables warnings in the flex/bison-generated code.
+#
+# Note that the GCC pragmas did not exist until gcc 4.2. Earlier versions
+# will simply ignore them, but we want to avoid those warnings.
+for f in H5LTparse.c H5LTanalyze.c
+do
+    echo '#if __GNUC__ >= 4 && __GNUC_MINOR__ >=2                           ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wconversion"                     ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wimplicit-function-declaration"  ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wlarger-than="                   ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wmissing-prototypes"             ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wnested-externs"                 ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wold-style-definition"           ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wsign-compare"                   ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wsign-conversion"                ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wstrict-prototypes"              ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wswitch-default"                 ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wunused-function"                ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wunused-macros"                  ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wunused-parameter"               ' >> tmp.out
+    echo '#pragma GCC diagnostic ignored "-Wredundant-decls"                ' >> tmp.out
+    echo '#elif defined __SUNPRO_CC                                         ' >> tmp.out
+    echo '#pragma disable_warn                                              ' >> tmp.out
+    echo '#elif defined _MSC_VER                                            ' >> tmp.out
+    echo '#pragma warning(push, 1)                                          ' >> tmp.out
+    echo '#endif                                                            ' >> tmp.out
+
+    cat $f >> tmp.out
+    mv tmp.out $f
+done
+
+cd ../..
+
+echo
+exit 0
+
diff --git a/bin/bbrelease b/bin/bbrelease
index 1e3b88d..1f6e479 100755
--- a/bin/bbrelease
+++ b/bin/bbrelease
@@ -156,7 +156,15 @@ tar2zip()
 
 # This command must be run at the top level of the hdf5 source directory.
 # Verify this requirement.
-if [ ! \( -f configure -a -f bin/release \) ]; then
+# Since we are running bbrelease to create an HDF5 source tarfile for buildbot
+# testing with source that is not for release, there is not a file named
+# "configure" but there will be one named "configure.ac".  The "configure"
+# file will be created when autogen.sh runs. There probably will always
+# be a bin/release file, but just in case it is removed, we can check for 
+# this script, bbrelease, in the bin directory.  The bin/release script should
+# continue to check for "configure" because it should be present in release 
+# source.
+if [ ! \( -f configure.ac -a -f bin/bbrelease \) ]; then
     echo "$0 must be run at the top level of the hdf5 source directory"
     exit 1
 fi
@@ -296,6 +304,7 @@ fi
 # Create a manifest that contains only files for distribution.
 MANIFEST=$tmpdir/H5_MANIFEST
 grep '^\.' MANIFEST | grep -v _DO_NOT_DISTRIBUTE_ >$MANIFEST
+echo "./autogen.sh" >>$MANIFEST
 
 # Prepare the source tree for a release.
 #ln -s `pwd` $tmpdir/$HDF5_VERS || exit 1
diff --git a/bin/cmakehdf5 b/bin/cmakehdf5
index 715d6d7..77fd452 100755
--- a/bin/cmakehdf5
+++ b/bin/cmakehdf5
@@ -46,7 +46,6 @@ fi
 cacheinit=$srcdir/config/cmake/cacheinit.cmake
 build_cpp_lib=-DHDF5_BUILD_CPP_LIB:BOOL=OFF	# C++ interface default off
 build_fortran=-DHDF5_BUILD_FORTRAN:BOOL=OFF	# Fortran interface default off
-enable_f2003=-DHDF5_ENABLE_F2003:BOOL=OFF	# Fortran2003 interface default off
 build_hl_lib=-DHDF5_BUILD_HL_LIB:BOOL=ON	# High Level interface default on
 build_testing=-DBUILD_TESTING:BOOL=ON		# Build tests default on
 build_tools=-DHDF5_BUILD_TOOLS:BOOL=ON		# Build tools default on
@@ -76,8 +75,6 @@ Usage: $progname [<options>]
   where options are:
   --enable-fortran | --disable-fortran:
     enable or disable fortran API. Default is off.
-  --enable-fortran2003 | --disable-fortran2003:
-    enable or disable fortran2003 API. Default is off.
   --enable-cxx | --disable-cxx:
     enable or disable c++ API. Default is off.
   --enable-hl | --disable-hl:
@@ -88,9 +85,11 @@ Usage: $progname [<options>]
     enable or disable building tools. Default is on.
   --enable-testing | --disable-testing:
     enable or disable building tests. Default is on.
-  --with-zlib | --without-zlib:
+  --with-zlib | --with-zlib=<libpath> | --without-zlib:
     Use zlib library for external deflate I/O filter. Default is on.
   --help: shows details help page
+
+  <libpath>: the file path to the library, expect <libpath>/lib and <libpath>/include.
 EOF
 }
 
@@ -182,12 +181,6 @@ while [ $# -gt 0 ]; do
 	--disable-fortran)
 	    build_fortran=-DHDF5_BUILD_FORTRAN:BOOL=OFF
 	    ;;
-	--enable-fortran2003)
-	    enable_f2003=-DHDF5_ENABLE_F2003:BOOL=ON
-	    ;;
-	--disable-fortran2003)
-	    enable_f2003=-DHDF5_ENABLE_F2003:BOOL=OFF
-	    ;;
 	--enable-cxx)
 	    build_cpp_lib=-DHDF5_BUILD_CPP_LIB:BOOL=ON
 	    ;;
@@ -221,6 +214,10 @@ while [ $# -gt 0 ]; do
 	--with-zlib)
 	    with_zlib=-DHDF5_ENABLE_Z_LIB_SUPPORT:BOOL=ON
 	    ;;
+	--with-zlib=*)
+	    xarg=`echo $1 | cut -d= -f2-`
+	    with_zlib="-DHDF5_ENABLE_Z_LIB_SUPPORT:BOOL=ON -DZLIB_ROOT=$xarg"
+	    ;;
 	--without-zlib)
 	    with_zlib=-DHDF5_ENABLE_Z_LIB_SUPPORT:BOOL=OFF
 	    ;;
@@ -265,7 +262,6 @@ STEP "Configure..." "cmake \
     -C $cacheinit \
     $build_cpp_lib \
     $build_fortran \
-    $enable_f2003 \
     $build_hl_lib \
     $shared_lib \
     $build_testing \
diff --git a/bin/compile b/bin/compile
deleted file mode 100755
index 9bc8e49..0000000
--- a/bin/compile
+++ /dev/null
@@ -1,113 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-
-# Wrapper for compilers which do not understand `-c -o'.
-
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Usage:
-# compile PROGRAM [ARGS]...
-# `-o FOO.o' is removed from the args passed to the actual compile.
-
-prog=$1
-shift
-
-ofile=
-cfile=
-args=
-while test $# -gt 0; do
-   case "$1" in
-    -o)
-       # configure might choose to run compile as `compile cc -o foo foo.c'.
-       # So we do something ugly here.
-       ofile=$2
-       shift
-       case "$ofile" in
-	*.o | *.obj)
-	   ;;
-	*)
-	   args="$args -o $ofile"
-	   ofile=
-	   ;;
-       esac
-       ;;
-    *.c)
-       cfile=$1
-       args="$args $1"
-       ;;
-    *)
-       args="$args $1"
-       ;;
-   esac
-   shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-   # If no `-o' option was seen then we might have been invoked from a
-   # pattern rule where we don't need one.  That is ok -- this is a
-   # normal compilation that the losing compiler can handle.  If no
-   # `.c' file was seen then we are probably linking.  That is also
-   # ok.
-   exec "$prog" $args
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use `[/.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d
-while true; do
-   if mkdir $lockdir > /dev/null 2>&1; then
-      break
-   fi
-   sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir $lockdir; exit 1" 1 2 15
-
-# Run the compile.
-"$prog" $args
-status=$?
-
-if test -f "$cofile"; then
-   mv "$cofile" "$ofile"
-fi
-
-rmdir $lockdir
-exit $status
diff --git a/bin/config.guess b/bin/config.guess
deleted file mode 100755
index 03fe473..0000000
--- a/bin/config.guess
+++ /dev/null
@@ -1,1526 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-#   Free Software Foundation, Inc.
-
-timestamp='2008-01-23'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-	case "${UNAME_MACHINE_ARCH}" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    sh5el) machine=sh5le-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE_ARCH}" in
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval $set_cc_for_build
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-	        os=netbsd
-		;;
-	esac
-	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "${UNAME_VERSION}" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-		;;
-	esac
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
-	exit ;;
-    *:OpenBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
-	exit ;;
-    *:ekkoBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-	exit ;;
-    *:SolidBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-	exit ;;
-    macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    *:MirBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    alpha:OSF1:*:*)
-	case $UNAME_RELEASE in
-	*4.0)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-		;;
-	*5.*)
-	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-		;;
-	esac
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
-	esac
-	# A Pn.n version is a patched version.
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit ;;
-    Alpha\ *:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# Should we change UNAME_MACHINE based on the output of uname instead
-	# of the specific Alpha model?
-	echo alpha-pc-interix
-	exit ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-morphos
-	exit ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit ;;
-    *:z/VM:*:*)
-	echo s390-ibm-zvmoe
-	exit ;;
-    *:OS400:*:*)
-        echo powerpc-ibm-os400
-	exit ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
-	echo arm-unknown-riscos
-	exit ;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit ;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit ;;
-    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7; exit ;;
-	esac ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit ;;
-    m68k:machten:*:*)
-	echo m68k-apple-machten${UNAME_RELEASE}
-	exit ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c &&
-	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-	  SYSTEM_NAME=`$dummy $dummyarg` &&
-	    { echo "$SYSTEM_NAME"; exit; }
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-	then
-	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-	    then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	    else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	    fi
-	else
-	    echo i586-dg-dgux${UNAME_RELEASE}
-	fi
- 	exit ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval $set_cc_for_build
-		sed 's/^		//' << EOF >$dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
-		then
-			echo "$SYSTEM_NAME"
-		else
-			echo rs6000-ibm-aix3.2.5
-		fi
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit ;;
-    *:AIX:*:[456])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit ;;                             # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
-		fi
-		if [ "${HP_ARCH}" = "" ]; then
-		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
-
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
-
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
-
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
-EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
-	esac
-	if [ ${HP_ARCH} = "hppa2.0w" ]
-	then
-	    eval $set_cc_for_build
-
-	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-	    # generating 64-bit code.  GNU and HP use different nomenclature:
-	    #
-	    # $ CC_FOR_BUILD=cc ./config.guess
-	    # => hppa2.0w-hp-hpux11.23
-	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-	    # => hppa64-hp-hpux11.23
-
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep __LP64__ >/dev/null
-	    then
-		HP_ARCH="hppa2.0w"
-	    else
-		HP_ARCH="hppa64"
-	    fi
-	fi
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux${HPUX_REV}
-	exit ;;
-    3050*:HI-UX:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
-		{ echo "$SYSTEM_NAME"; exit; }
-	echo unknown-hitachi-hiuxwe2
-	exit ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-        exit ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-        exit ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-        exit ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-        exit ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-        exit ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    *:UNICOS/mp:*:*)
-	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit ;;
-    5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    amd64)
-		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	esac
-	exit ;;
-    i*:CYGWIN*:* | x*:CYGWIN*:*)
-    echo ${UNAME_MACHINE}-pc-cygwin
-    exit ;;
-    *:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit ;;
-    i*:windows32*:*)
-    	# uname -m includes "-pc" on this system.
-    	echo ${UNAME_MACHINE}-mingw32
-	exit ;;
-    i*:PW*:*)
-	echo ${UNAME_MACHINE}-pc-pw32
-	exit ;;
-    *:Interix*:[3456]*)
-    	case ${UNAME_MACHINE} in
-	    x86)
-		echo i586-pc-interix${UNAME_RELEASE}
-		exit ;;
-	    EM64T | authenticamd)
-		echo x86_64-unknown-interix${UNAME_RELEASE}
-		exit ;;
-	    IA64)
-		echo ia64-unknown-interix${UNAME_RELEASE}
-		exit ;;
-	esac ;;
-    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-	echo i${UNAME_MACHINE}-pc-mks
-	exit ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i586-pc-interix
-	exit ;;
-    i*:UWIN*:*)
-	echo ${UNAME_MACHINE}-pc-uwin
-	exit ;;
-    amd64:CYGWIN*:*:*)
-	echo x86_64-unknown-cygwin
-	exit ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin
-	exit ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    *:GNU:*:*)
-	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit ;;
-    *:GNU/*:*:*)
-	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-	exit ;;
-    i*86:Minix:*:*)
-	echo ${UNAME_MACHINE}-pc-minix
-	exit ;;
-    arm*:Linux:*:*)
-	eval $set_cc_for_build
-	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
-	    | grep -q __ARM_EABI__
-	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
-	else
-	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
-	fi
-	exit ;;
-    avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    cris:Linux:*:*)
-	echo cris-axis-linux-gnu
-	exit ;;
-    crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
-	exit ;;
-    frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
-	exit ;;
-    ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    mips:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips
-	#undef mipsel
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
-	esac
-	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
-	exit ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
-	exit ;;
-    sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
-	exit ;;
-    x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
-	exit ;;
-    xtensa*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    i*86:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-			 | sed -ne '/supported targets:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported targets: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_targets" in
-	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit ;;
-	esac
-	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^LIBC/{
-		s: ::g
-		p
-	    }'`"
-	test x"${LIBC}" != x && {
-		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-		exit
-	}
-	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
-	;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit ;;
-    i*86:syllable:*:*)
-	echo ${UNAME_MACHINE}-pc-syllable
-	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit ;;
-    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-	fi
-	exit ;;
-    i*86:*:5:[678]*)
-    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
-        exit ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit ;;
-    M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && { echo i486-ncr-sysv4; exit; } ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
-	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@openmarket.com>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit ;;
-    *:*:*:FTX*)
-	# From seanf@swdc.stratus.com.
-	echo i860-stratus-sysv4
-	exit ;;
-    i*86:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo ${UNAME_MACHINE}-stratus-vos
-	exit ;;
-    *:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo hppa1.1-stratus-vos
-	exit ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
-	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-        exit ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-7:SUPER-UX:*:*)
-	echo sx7-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8:SUPER-UX:*:*)
-	echo sx8-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8R:SUPER-UX:*:*)
-	echo sx8r-nec-superux${UNAME_RELEASE}
-	exit ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Rhapsody:*:*)
-	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Darwin:*:*)
-	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    unknown) UNAME_PROCESSOR=powerpc ;;
-	esac
-	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
-	echo nse-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit ;;
-    DS/*:UNIX_System_V:*:*)
-	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	if test "$cputype" = "386"; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo ${UNAME_MACHINE}-unknown-plan9
-	exit ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit ;;
-    SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
-	exit ;;
-    *:DragonFly:*:*)
-	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit ;;
-    *:*VMS:*:*)
-    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-	case "${UNAME_MACHINE}" in
-	    A*) echo alpha-dec-vms ; exit ;;
-	    I*) echo ia64-dec-vms ; exit ;;
-	    V*) echo vax-dec-vms ; exit ;;
-	esac ;;
-    *:XENIX:*:SysV)
-	echo i386-pc-xenix
-	exit ;;
-    i*86:skyos:*:*)
-	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
-	exit ;;
-    i*86:rdos:*:*)
-	echo ${UNAME_MACHINE}-pc-rdos
-	exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-	  ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-and
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM  = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/bin/config.sub b/bin/config.sub
deleted file mode 100755
index 6759825..0000000
--- a/bin/config.sub
+++ /dev/null
@@ -1,1658 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-#   Free Software Foundation, Inc.
-
-timestamp='2008-01-16'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo $1
-       exit ;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray)
-		os=
-		basic_machine=$1
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
- 	-chorusrdb)
- 		os=-chorusrdb
-		basic_machine=$1
- 		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
-	| bfin \
-	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
-	| fido | fr30 | frv \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| i370 | i860 | i960 | ia64 \
-	| ip2k | iq2000 \
-	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
-	| mips64orion | mips64orionel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mips64vr5900 | mips64vr5900el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| mt \
-	| msp430 \
-	| nios | nios2 \
-	| ns16k | ns32k \
-	| or32 \
-	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
-	| pyramid \
-	| score \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu | strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
-	| v850 | v850e \
-	| we32k \
-	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-	| z8k)
-		basic_machine=$basic_machine-unknown
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12)
-		# Motorola 68HC11/12.
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-		;;
-	ms1)
-		basic_machine=mt-unknown
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* | avr32-* \
-	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | craynv-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
-	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* | iq2000-* \
-	| m32c-* | m32r-* | m32rle-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mips64vr5900-* | mips64vr5900el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39-* | mipstx39el-* \
-	| mmix-* \
-	| mt-* \
-	| msp430-* \
-	| nios-* | nios2-* \
-	| none-* | np1-* | ns16k-* | ns32k-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
-	| pyramid-* \
-	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tron-* \
-	| v850-* | v850e-* | vax-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa*-* \
-	| ymp-* \
-	| z8k-*)
-		;;
-	# Recognize the basic CPU types without company name, with glob match.
-	xtensa*)
-		basic_machine=$basic_machine-unknown
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-unknown
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-    	abacus)
-		basic_machine=abacus-unknown
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amd64)
-		basic_machine=x86_64-pc
-		;;
-	amd64-*)
-		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-unknown
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-unknown
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-unknown
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	blackfin)
-		basic_machine=bfin-unknown
-		os=-linux
-		;;
-	blackfin-*)
-		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | j90)
-		basic_machine=j90-cray
-		os=-unicos
-		;;
-	craynv)
-		basic_machine=craynv-cray
-		os=-unicosmp
-		;;
-	cr16)
-		basic_machine=cr16-unknown
-		os=-elf
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	crisv32 | crisv32-* | etraxfs*)
-		basic_machine=crisv32-axis
-		;;
-	cris | cris-* | etrax*)
-		basic_machine=cris-axis
-		;;
-	crx)
-		basic_machine=crx-unknown
-		os=-elf
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	djgpp)
-		basic_machine=i586-pc
-		os=-msdosdjgpp
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	go32)
-		basic_machine=i386-pc
-		os=-go32
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i*86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i*86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i*86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i*86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	i386-vsta | vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m68knommu)
-		basic_machine=m68k-unknown
-		os=-linux
-		;;
-	m68knommu-*)
-		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	mingw32)
-		basic_machine=i386-pc
-		os=-mingw32
-		;;
-	mingw32ce)
-		basic_machine=arm-unknown
-		os=-mingw32ce
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
-	msdos)
-		basic_machine=i386-pc
-		os=-msdos
-		;;
-	ms1-*)
-		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	nonstopux)
-		basic_machine=mips-compaq
-		os=-nonstopux
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	nsr-tandem)
-		basic_machine=nsr-tandem
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	openrisc | openrisc-*)
-		basic_machine=or32-unknown
-		;;
-	os400)
-		basic_machine=powerpc-ibm
-		os=-os400
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	parisc)
-		basic_machine=hppa-unknown
-		os=-linux
-		;;
-	parisc-*)
-		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-	pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2 | pentiumiii | pentium3)
-		basic_machine=i686-pc
-		;;
-	pentium4)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium4-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=power-ibm
-		;;
-	ppc)	basic_machine=powerpc-unknown
-		;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-		;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	pw32)
-		basic_machine=i586-unknown
-		os=-pw32
-		;;
-	rdos)
-		basic_machine=i386-pc
-		os=-rdos
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sde)
-		basic_machine=mipsisa32-sde
-		os=-elf
-		;;
-	sei)
-		basic_machine=mips-sei
-		os=-seiux
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sh5el)
-		basic_machine=sh5le-unknown
-		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparclite-wrs | simso-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	sv1)
-		basic_machine=sv1-cray
-		os=-unicos
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
-		os=-unicos
-		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
-		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
-		;;
-	tile*)
-		basic_machine=tile-unknown
-		os=-linux-gnu
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	tpf)
-		basic_machine=s390x-ibm
-		os=-tpf
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	xbox)
-		basic_machine=i686-pc
-		os=-mingw32
-		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	mmix)
-		basic_machine=mmix-knuth
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp10)
-		# there are many clones, so DEC is not a safe bet
-		basic_machine=pdp10-unknown
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
-		basic_machine=sh-unknown
-		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-		basic_machine=sparc-sun
-		;;
-	cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	*-unknown)
-		# Make sure to match an already-canonicalized machine name.
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
-	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
-	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
-	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-qnx*)
-		case $basic_machine in
-		    x86-* | i*86-*)
-			;;
-		    *)
-			os=-nto$os
-			;;
-		esac
-		;;
-	-nto-qnx*)
-		;;
-	-nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
-	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
-		;;
-	-linux-dietlibc)
-		os=-linux-dietlibc
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-        -os400*)
-		os=-os400
-		;;
-	-wince*)
-		os=-wince
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-atheos*)
-		os=-atheos
-		;;
-	-syllable*)
-		os=-syllable
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
-	-ns2 )
-		os=-nextstep2
-		;;
-	-nsk*)
-		os=-nsk
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-        -tpf*)
-		os=-tpf
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-aros*)
-		os=-aros
-		;;
-	-kaos*)
-		os=-kaos
-		;;
-	-zvmoe)
-		os=-zvmoe
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-        score-*)
-		os=-elf
-		;;
-        spu-*)
-		os=-elf
-		;;
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-        c4x-* | tic4x-*)
-        	os=-coff
-		;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=-tops20
-		;;
-	pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-        mep-*)
-		os=-elf
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	or32-*)
-		os=-coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-haiku)
-		os=-haiku
-		;;
-	*-ibm)
-		os=-aix
-		;;
-    	*-knuth)
-		os=-mmixware
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-	*-gould)
-		os=-sysv
-		;;
-	*-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-	*-sgi)
-		os=-irix
-		;;
-	*-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-os400*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-tpf*)
-				vendor=ibm
-				;;
-			-vxsim* | -vxworks* | -windiss*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-				vendor=atari
-				;;
-			-vos*)
-				vendor=stratus
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/bin/depcomp b/bin/depcomp
deleted file mode 100755
index ffcd540..0000000
--- a/bin/depcomp
+++ /dev/null
@@ -1,529 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2005-02-09.22
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-  stat=$?
-
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no
-  for arg in "$@"; do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  "$@" || exit $?
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/bin/distdep b/bin/distdep
index 0a22bd1..0a22bd1 100644..100755
--- a/bin/distdep
+++ b/bin/distdep
diff --git a/bin/genltanalyze b/bin/genltanalyze
deleted file mode 100755
index 1f56cc1..0000000
--- a/bin/genltanalyze
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/sh
-##
-## Copyright by the Board of Trustees of the University of Illinois.
-## All rights reserved.
-##
-## This file is part of HDF5.  The full HDF5 copyright notice, including
-## terms governing use, modification, and redistribution, is contained in
-## the files COPYING and Copyright.html.  COPYING can be found at the root
-## of the source code distribution tree; Copyright.html can be found at the
-## root level of an installed copy of the electronic HDF5 document set and
-## is linked from the top-level documents page.  It can also be found at
-## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-##
-# regenerate hl/src/H5LTanalyze.c
-
-# HDF5 currently uses the following versions of the bison flex:
-BISON_VERSION="bison (GNU Bison) 2.7"
-FLEX_VERSION="flex 2.5.37"
-
-# If paths to bison flex are not specified by the user, assume tools are
-# running on jam in /mnt/hdf/packages and set paths accordingly.
-if test -z ${BISON}; then
-  BISON=/usr/hdf/bin/bison
-fi
-if test -z ${FLEX}; then
-  FLEX=/usr/hdf/bin/flex
-fi
-
-# Check version numbers of all bison flex against the "correct" versions
-BI_VERS=`${BISON} --version 2>&1 | grep "^${BISON_VERSION}"`
-if test -z "${BI_VERS}"; then
-   echo "${BISON} version is not ${BISON_VERSION}"
-   exit 1
-fi
-FL_VERS=`${FLEX} --version 2>&1 | grep "^${FLEX_VERSION}"`
-if test -z "${FL_VERS}"; then
-   echo "${FLEX} version is not ${FLEX_VERSION}"
-   exit 1
-fi
-
-# Make sure that the tools are in the path.
-BISON_DIR=`dirname ${BISON}`
-FLEX_DIR=`dirname ${FLEX}`
-
-# Main body
-cd hl/src
-echo "Generate hl/src/H5LTparse.c from hl/src/H5LTparse.y"
-bison -pH5LTyy -o H5LTparse.c -d H5LTparse.y
-echo "Generate hl/src/H5LTanalyze.c from hl/src/H5LTanalyze.l"
-flex --nounistd -PH5LTyy -oH5LTanalyze.c H5LTanalyze.l
-
-# fix H5LTparse.c to declare H5LTyyparse return type as an hid_t
-# instead of int.  Currently the generated function H5LTyyparse is
-# generated with a return value of type int, which is a mapping to the
-# flex yyparse function.  The return value in the HL library should be
-# an hid_t. 
-# I propose to not use flex to generate this function, but for now I am 
-# adding a perl command to find and replace this function declaration in
-# H5LTparse.c.
-perl -0777 -pi -e 's/int\nyyparse/hid_t\nyyparse/igs' H5LTparse.c
-perl -0777 -pi -e 's/int H5LTyyparse/hid_t H5LTyyparse/igs' H5LTparse.c
-
-# Add code that disables warnings in the flex/bison-generated code.
-#
-# Note that the GCC pragmas did not exist until gcc 4.2. Earlier versions
-# will simply ignore them, but we want to avoid those warnings.
-for f in H5LTparse.c H5LTanalyze.c
-do
-    echo '#if __GNUC__ >= 4 && __GNUC_MINOR__ >=2                           ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wconversion"                     ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wimplicit-function-declaration"  ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wlarger-than="                   ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wmissing-prototypes"             ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wnested-externs"                 ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wold-style-definition"           ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wsign-compare"                   ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wsign-conversion"                ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wstrict-prototypes"              ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wswitch-default"                 ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wunused-function"                ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wunused-macros"                  ' >> tmp.out
-    echo '#pragma GCC diagnostic ignored "-Wunused-parameter"               ' >> tmp.out
-    echo '#elif defined __SUNPRO_CC                                         ' >> tmp.out
-    echo '#pragma disable_warn                                              ' >> tmp.out
-    echo '#elif defined _MSC_VER                                            ' >> tmp.out
-    echo '#pragma warning(push, 1)                                          ' >> tmp.out
-    echo '#endif                                                            ' >> tmp.out
-
-    cat $f >> tmp.out
-    mv tmp.out $f
-done
-
-cd ../..
-
-exit 0
diff --git a/bin/install-sh b/bin/install-sh
deleted file mode 100755
index 6781b98..0000000
--- a/bin/install-sh
+++ /dev/null
@@ -1,520 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2009-04-28.21; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-	shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
-
-    -o) chowncmd="$chownprog $2"
-	shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t) dst_arg=$2
-	shift;;
-
-    -T) no_target_directory=true;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dst_arg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix='/';;
-	-*) prefix='./';;
-	*)  prefix='';;
-      esac
-
-      eval "$initialize_posix_glob"
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob set -f
-      set fnord $dstdir
-      shift
-      $posix_glob set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test -z "$d" && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
-
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/bin/ltmain.sh b/bin/ltmain.sh
deleted file mode 100644
index 63ae69d..0000000
--- a/bin/ltmain.sh
+++ /dev/null
@@ -1,9655 +0,0 @@
-
-# libtool (GNU libtool) 2.4.2
-# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions.  There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# GNU Libtool is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --no-warn            don't display warning messages
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-#         host-triplet:	$host
-#         shell:		$SHELL
-#         compiler:		$LTCC
-#         compiler flags:		$LTCFLAGS
-#         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.4.2
-#         automake:	$automake_version
-#         autoconf:	$autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
-
-PROGRAM=libtool
-PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
-  eval "if test \"\${$lt_var+set}\" = set; then
-          save_$lt_var=\$$lt_var
-          $lt_var=C
-	  export $lt_var
-	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
-	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
-	fi"
-done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-
-$lt_unset CDPATH
-
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-
-
-: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-} # func_dirname may be replaced by extended shell implementation
-
-
-# func_basename file
-func_basename ()
-{
-    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-    # Extract subdirectory from the argument.
-    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-    case ${2} in
-      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-    esac
-} # func_stripname may be replaced by extended shell implementation
-
-
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
-		s@/\./@/@g
-		t dotsl
-		s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-#             value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
-      "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
-        ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
-        ;;
-      *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
-        ;;
-    esac
-  done
-
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
-
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
-}
-
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-
-# Make sure we have an absolute path for reexecution:
-case $progpath in
-  [\\/]*|[A-Za-z]:\\*) ;;
-  *[\\/]*)
-     progdir=$func_dirname_result
-     progdir=`cd "$progdir" && pwd`
-     progpath="$progdir/$progname"
-     ;;
-  *)
-     save_IFS="$IFS"
-     IFS=${PATH_SEPARATOR-:}
-     for progdir in $PATH; do
-       IFS="$save_IFS"
-       test -x "$progdir/$progname" && break
-     done
-     IFS="$save_IFS"
-     test -n "$progdir" || progdir=`pwd`
-     progpath="$progdir/$progname"
-     ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes.  A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
-  s/$bs4/&\\
-/g
-  s/^$bs2$dollar/$bs&/
-  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
-  s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
-    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
-
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
-    $opt_verbose && func_echo ${1+"$@"}
-
-    # A bug in bash halts the script if the last line of a function
-    # fails when set -e is in force, so we need another command to
-    # work around that:
-    :
-}
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*"
-}
-
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
-    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
-
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
-    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
-
-    # bash bug again:
-    :
-}
-
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
-    func_error ${1+"$@"}
-    exit $EXIT_FAILURE
-}
-
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
-    func_error ${1+"$@"}
-    func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information."  ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
-    $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
-    my_directory_path="$1"
-    my_dir_list=
-
-    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
-      # Protect directory names starting with `-'
-      case $my_directory_path in
-        -*) my_directory_path="./$my_directory_path" ;;
-      esac
-
-      # While some portion of DIR does not yet exist...
-      while test ! -d "$my_directory_path"; do
-        # ...make a list in topmost first order.  Use a colon delimited
-	# list incase some portion of path contains whitespace.
-        my_dir_list="$my_directory_path:$my_dir_list"
-
-        # If the last portion added has no slash in it, the list is done
-        case $my_directory_path in */*) ;; *) break ;; esac
-
-        # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
-      done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
-
-      save_mkdir_p_IFS="$IFS"; IFS=':'
-      for my_dir in $my_dir_list; do
-	IFS="$save_mkdir_p_IFS"
-        # mkdir can fail with a `File exist' error if two processes
-        # try to create one of the directories concurrently.  Don't
-        # stop in that case!
-        $MKDIR "$my_dir" 2>/dev/null || :
-      done
-      IFS="$save_mkdir_p_IFS"
-
-      # Bail out if we (or some other process) failed to create a directory.
-      test -d "$my_directory_path" || \
-        func_fatal_error "Failed to create \`$1'"
-    fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
-
-    if test "$opt_dry_run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
-
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
-      if test ! -d "$my_tmpdir"; then
-        # Failing that, at least try and use $RANDOM to avoid a race
-        my_tmpdir="${my_template}-${RANDOM-0}$$"
-
-        save_mktempdir_umask=`umask`
-        umask 0077
-        $MKDIR "$my_tmpdir"
-        umask $save_mktempdir_umask
-      fi
-
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || \
-        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
-    fi
-
-    $ECHO "$my_tmpdir"
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
-{
-    case $1 in
-      *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
-      *)
-        func_quote_for_eval_unquoted_result="$1" ;;
-    esac
-
-    case $func_quote_for_eval_unquoted_result in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting, command substitution and and variable
-      # expansion for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
-        ;;
-      *)
-        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
-    esac
-}
-
-
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
-{
-    case $1 in
-      *[\\\`\"]*)
-	my_arg=`$ECHO "$1" | $SED \
-	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
-      *)
-        my_arg="$1" ;;
-    esac
-
-    case $my_arg in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting and command substitution for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        my_arg="\"$my_arg\""
-        ;;
-    esac
-
-    func_quote_for_expand_result="$my_arg"
-}
-
-
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$my_cmd"
-      my_status=$?
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.  Use the saved locale for evaluation.
-func_show_eval_locale ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$lt_user_locale
-	    $my_cmd"
-      my_status=$?
-      eval "$lt_safe_locale"
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result.  All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
-  case $1 in
-  [0-9]* | *[!a-zA-Z0-9_]*)
-    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
-    ;;
-  * )
-    func_tr_sh_result=$1
-    ;;
-  esac
-}
-
-
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
-    $opt_debug
-
-    $SED -n '/(C)/!b go
-	:more
-	/\./!{
-	  N
-	  s/\n# / /
-	  b more
-	}
-	:go
-	/^# '$PROGRAM' (GNU /,/# warranty; / {
-        s/^# //
-	s/^# *$//
-        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
-        p
-     }' < "$progpath"
-     exit $?
-}
-
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
-{
-    $opt_debug
-
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
-        s/^# //
-	s/^# *$//
-	s/\$progname/'$progname'/
-	p
-    }' < "$progpath"
-    echo
-    $ECHO "run \`$progname --help | more' for full usage"
-    exit $?
-}
-
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
-func_help ()
-{
-    $opt_debug
-
-    $SED -n '/^# Usage:/,/# Report bugs to/ {
-	:print
-        s/^# //
-	s/^# *$//
-	s*\$progname*'$progname'*
-	s*\$host*'"$host"'*
-	s*\$SHELL*'"$SHELL"'*
-	s*\$LTCC*'"$LTCC"'*
-	s*\$LTCFLAGS*'"$LTCFLAGS"'*
-	s*\$LD*'"$LD"'*
-	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
-	p
-	d
-     }
-     /^# .* home page:/b print
-     /^# General help using/b print
-     ' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
-}
-
-# func_missing_arg argname
-# Echo program name prefixed message to standard error and set global
-# exit_cmd.
-func_missing_arg ()
-{
-    $opt_debug
-
-    func_error "missing argument for $1."
-    exit_cmd=exit
-}
-
-
-# func_split_short_opt shortopt
-# Set func_split_short_opt_name and func_split_short_opt_arg shell
-# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
-{
-    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
-    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
-
-    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
-    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
-
-
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
-{
-    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
-    my_sed_long_arg='1s/^--[^=]*=//'
-
-    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
-    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
-
-exit_cmd=:
-
-
-
-
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-    eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
-
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
-    func_quote_for_eval "${2}"
-    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
-
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-    func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
-
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
-
-
-# func_lo2o object
-func_lo2o ()
-{
-    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
-
-
-# func_xform libobj-or-source
-func_xform ()
-{
-    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
-# func_fatal_configuration arg...
-# Echo program name prefixed message to standard error, followed by
-# a configuration failure hint, and exit.
-func_fatal_configuration ()
-{
-    func_error ${1+"$@"}
-    func_error "See the $PACKAGE documentation for more information."
-    func_fatal_error "Fatal configuration error."
-}
-
-
-# func_config
-# Display the configuration for all the tags in this script.
-func_config ()
-{
-    re_begincf='^# ### BEGIN LIBTOOL'
-    re_endcf='^# ### END LIBTOOL'
-
-    # Default configuration.
-    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
-
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
-    done
-
-    exit $?
-}
-
-# func_features
-# Display the features supported by this script.
-func_features ()
-{
-    echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
-    else
-      echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
-    else
-      echo "disable static libraries"
-    fi
-
-    exit $?
-}
-
-# func_enable_tag tagname
-# Verify that TAGNAME is valid, and either flag an error and exit, or
-# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
-# variable here.
-func_enable_tag ()
-{
-  # Global variable:
-  tagname="$1"
-
-  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-  sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
-  # Validate tagname.
-  case $tagname in
-    *[!-_A-Za-z0-9,/]*)
-      func_fatal_error "invalid tag name: $tagname"
-      ;;
-  esac
-
-  # Don't test for the "default" C tag, as we know it's
-  # there but not specially marked.
-  case $tagname in
-    CC) ;;
-    *)
-      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-	taglist="$taglist $tagname"
-
-	# Evaluate the configuration.  Be careful to quote the path
-	# and the sed script, to avoid splitting on whitespace, but
-	# also don't use non-portable quotes within backquotes within
-	# quotes we have to do it in 2 steps:
-	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-	eval "$extractedcf"
-      else
-	func_error "ignoring unknown tag $tagname"
-      fi
-      ;;
-  esac
-}
-
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      else
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
-    fi
-
-    exit $EXIT_MISMATCH
-  fi
-}
-
-
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
-  shift; set dummy --mode clean ${1+"$@"}; shift
-  ;;
-compile|compil|compi|comp|com|co|c)
-  shift; set dummy --mode compile ${1+"$@"}; shift
-  ;;
-execute|execut|execu|exec|exe|ex|e)
-  shift; set dummy --mode execute ${1+"$@"}; shift
-  ;;
-finish|finis|fini|fin|fi|f)
-  shift; set dummy --mode finish ${1+"$@"}; shift
-  ;;
-install|instal|insta|inst|ins|in|i)
-  shift; set dummy --mode install ${1+"$@"}; shift
-  ;;
-link|lin|li|l)
-  shift; set dummy --mode link ${1+"$@"}; shift
-  ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-  shift; set dummy --mode uninstall ${1+"$@"}; shift
-  ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
-
-
-# Parse options once, thoroughly.  This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
-  # this just eases exit handling
-  while test $# -gt 0; do
-    opt="$1"
-    shift
-    case $opt in
-      --debug|-x)	opt_debug='set -x'
-			func_echo "enabling shell trace mode"
-			$opt_debug
-			;;
-      --dry-run|--dryrun|-n)
-			opt_dry_run=:
-			;;
-      --config)
-			opt_config=:
-func_config
-			;;
-      --dlopen|-dlopen)
-			optarg="$1"
-			opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
-			shift
-			;;
-      --preserve-dup-deps)
-			opt_preserve_dup_deps=:
-			;;
-      --features)
-			opt_features=:
-func_features
-			;;
-      --finish)
-			opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
-			;;
-      --help)
-			opt_help=:
-			;;
-      --help-all)
-			opt_help_all=:
-opt_help=': help-all'
-			;;
-      --mode)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_mode="$optarg"
-case $optarg in
-  # Valid mode arguments:
-  clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
-  # Catch anything else as an error
-  *) func_error "invalid argument for $opt"
-     exit_cmd=exit
-     break
-     ;;
-esac
-			shift
-			;;
-      --no-silent|--no-quiet)
-			opt_silent=false
-func_append preserve_args " $opt"
-			;;
-      --no-warning|--no-warn)
-			opt_warning=false
-func_append preserve_args " $opt"
-			;;
-      --no-verbose)
-			opt_verbose=false
-func_append preserve_args " $opt"
-			;;
-      --silent|--quiet)
-			opt_silent=:
-func_append preserve_args " $opt"
-        opt_verbose=false
-			;;
-      --verbose|-v)
-			opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
-			;;
-      --tag)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
-			shift
-			;;
-
-      -\?|-h)		func_usage				;;
-      --help)		func_help				;;
-      --version)	func_version				;;
-
-      # Separate optargs to long options:
-      --*=*)
-			func_split_long_opt "$opt"
-			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      # Separate non-argument short options:
-      -\?*|-h*|-n*|-v*)
-			func_split_short_opt "$opt"
-			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      --)		break					;;
-      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
-      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
-    esac
-  done
-
-  # Validate options:
-
-  # save first non-option argument
-  if test "$#" -gt 0; then
-    nonopt="$opt"
-    shift
-  fi
-
-  # preserve --debug
-  test "$opt_debug" = : || func_append preserve_args " --debug"
-
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
-      ;;
-  esac
-
-  $opt_help || {
-    # Sanity checks first:
-    func_check_version_match
-
-    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-      func_fatal_configuration "not configured to build any kind of library"
-    fi
-
-    # Darwin sucks
-    eval std_shrext=\"$shrext_cmds\"
-
-    # Only execute mode is allowed to have -dlopen flags.
-    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
-      func_error "unrecognized option \`-dlopen'"
-      $ECHO "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Change the help message to a mode-specific one.
-    generic_help="$help"
-    help="Try \`$progname --help --mode=$opt_mode' for more information."
-  }
-
-
-  # Bail if the options were screwed
-  $exit_cmd $EXIT_FAILURE
-}
-
-
-
-
-## ----------- ##
-##    Main.    ##
-## ----------- ##
-
-# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_lalib_p ()
-{
-    test -f "$1" &&
-      $SED -e 4q "$1" 2>/dev/null \
-        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-}
-
-# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function implements the same check as func_lalib_p without
-# resorting to external programs.  To this end, it redirects stdin and
-# closes it afterwards, without saving the original file descriptor.
-# As a safety measure, use it only where a negative result would be
-# fatal anyway.  Works if `file' does not exist.
-func_lalib_unsafe_p ()
-{
-    lalib_p=no
-    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
-	for lalib_p_l in 1 2 3 4
-	do
-	    read lalib_p_line
-	    case "$lalib_p_line" in
-		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
-	    esac
-	done
-	exec 0<&5 5<&-
-    fi
-    test "$lalib_p" = yes
-}
-
-# func_ltwrapper_script_p file
-# True iff FILE is a libtool wrapper script
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_script_p ()
-{
-    func_lalib_p "$1"
-}
-
-# func_ltwrapper_executable_p file
-# True iff FILE is a libtool wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_executable_p ()
-{
-    func_ltwrapper_exec_suffix=
-    case $1 in
-    *.exe) ;;
-    *) func_ltwrapper_exec_suffix=.exe ;;
-    esac
-    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
-}
-
-# func_ltwrapper_scriptname file
-# Assumes file is an ltwrapper_executable
-# uses $file to determine the appropriate filename for a
-# temporary ltwrapper_script.
-func_ltwrapper_scriptname ()
-{
-    func_dirname_and_basename "$1" "" "."
-    func_stripname '' '.exe' "$func_basename_result"
-    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-}
-
-# func_ltwrapper_p file
-# True iff FILE is a libtool wrapper script or wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_p ()
-{
-    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
-}
-
-
-# func_execute_cmds commands fail_cmd
-# Execute tilde-delimited COMMANDS.
-# If FAIL_CMD is given, eval that upon failure.
-# FAIL_CMD may read-access the current command in variable CMD!
-func_execute_cmds ()
-{
-    $opt_debug
-    save_ifs=$IFS; IFS='~'
-    for cmd in $1; do
-      IFS=$save_ifs
-      eval cmd=\"$cmd\"
-      func_show_eval "$cmd" "${2-:}"
-    done
-    IFS=$save_ifs
-}
-
-
-# func_source file
-# Source FILE, adding directory component if necessary.
-# Note that it is not necessary on cygwin/mingw to append a dot to
-# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
-# behavior happens only for exec(3), not for open(2)!  Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
-func_source ()
-{
-    $opt_debug
-    case $1 in
-    */* | *\\*)	. "$1" ;;
-    *)		. "./$1" ;;
-    esac
-}
-
-
-# func_resolve_sysroot PATH
-# Replace a leading = in PATH with a sysroot.  Store the result into
-# func_resolve_sysroot_result
-func_resolve_sysroot ()
-{
-  func_resolve_sysroot_result=$1
-  case $func_resolve_sysroot_result in
-  =*)
-    func_stripname '=' '' "$func_resolve_sysroot_result"
-    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
-    ;;
-  esac
-}
-
-# func_replace_sysroot PATH
-# If PATH begins with the sysroot, replace it with = and
-# store the result into func_replace_sysroot_result.
-func_replace_sysroot ()
-{
-  case "$lt_sysroot:$1" in
-  ?*:"$lt_sysroot"*)
-    func_stripname "$lt_sysroot" '' "$1"
-    func_replace_sysroot_result="=$func_stripname_result"
-    ;;
-  *)
-    # Including no sysroot.
-    func_replace_sysroot_result=$1
-    ;;
-  esac
-}
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
-    $opt_debug
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-	func_append_quoted CC_quoted "$arg"
-      done
-      CC_expanded=`func_echo_all $CC`
-      CC_quoted_expanded=`func_echo_all $CC_quoted`
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	      # Double-quote args containing other shell metacharacters.
-	      func_append_quoted CC_quoted "$arg"
-	    done
-	    CC_expanded=`func_echo_all $CC`
-	    CC_quoted_expanded=`func_echo_all $CC_quoted`
-	    case "$@ " in
-	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  func_echo "unable to infer tagged configuration"
-	  func_fatal_error "specify a tag with \`--tag'"
-#	else
-#	  func_verbose "using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-}
-
-
-
-# func_write_libtool_object output_name pic_name nonpic_name
-# Create a libtool object file (analogous to a ".la" file),
-# but don't create it if we're doing a dry run.
-func_write_libtool_object ()
-{
-    write_libobj=${1}
-    if test "$build_libtool_libs" = yes; then
-      write_lobj=\'${2}\'
-    else
-      write_lobj=none
-    fi
-
-    if test "$build_old_libs" = yes; then
-      write_oldobj=\'${3}\'
-    else
-      write_oldobj=none
-    fi
-
-    $opt_dry_run || {
-      cat >${write_libobj}T <<EOF
-# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-pic_object=$write_lobj
-
-# Name of the non-PIC object
-non_pic_object=$write_oldobj
-
-EOF
-      $MV "${write_libobj}T" "${write_libobj}"
-    }
-}
-
-
-##################################################
-# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
-##################################################
-
-# func_convert_core_file_wine_to_w32 ARG
-# Helper function used by file name conversion functions when $build is *nix,
-# and $host is mingw, cygwin, or some other w32 environment. Relies on a
-# correctly configured wine environment available, with the winepath program
-# in $build's $PATH.
-#
-# ARG is the $build file name to be converted to w32 format.
-# Result is available in $func_convert_core_file_wine_to_w32_result, and will
-# be empty on error (or when ARG is empty)
-func_convert_core_file_wine_to_w32 ()
-{
-  $opt_debug
-  func_convert_core_file_wine_to_w32_result="$1"
-  if test -n "$1"; then
-    # Unfortunately, winepath does not exit with a non-zero error code, so we
-    # are forced to check the contents of stdout. On the other hand, if the
-    # command is not found, the shell will set an exit code of 127 and print
-    # *an error message* to stdout. So we must check for both error code of
-    # zero AND non-empty stdout, which explains the odd construction:
-    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
-      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-        $SED -e "$lt_sed_naive_backslashify"`
-    else
-      func_convert_core_file_wine_to_w32_result=
-    fi
-  fi
-}
-# end: func_convert_core_file_wine_to_w32
-
-
-# func_convert_core_path_wine_to_w32 ARG
-# Helper function used by path conversion functions when $build is *nix, and
-# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
-# configured wine environment available, with the winepath program in $build's
-# $PATH. Assumes ARG has no leading or trailing path separator characters.
-#
-# ARG is path to be converted from $build format to win32.
-# Result is available in $func_convert_core_path_wine_to_w32_result.
-# Unconvertible file (directory) names in ARG are skipped; if no directory names
-# are convertible, then the result may be empty.
-func_convert_core_path_wine_to_w32 ()
-{
-  $opt_debug
-  # unfortunately, winepath doesn't convert paths, only file names
-  func_convert_core_path_wine_to_w32_result=""
-  if test -n "$1"; then
-    oldIFS=$IFS
-    IFS=:
-    for func_convert_core_path_wine_to_w32_f in $1; do
-      IFS=$oldIFS
-      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
-        if test -z "$func_convert_core_path_wine_to_w32_result"; then
-          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
-        else
-          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
-        fi
-      fi
-    done
-    IFS=$oldIFS
-  fi
-}
-# end: func_convert_core_path_wine_to_w32
-
-
-# func_cygpath ARGS...
-# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
-# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
-# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
-# (2), returns the Cygwin file name or path in func_cygpath_result (input
-# file name or path is assumed to be in w32 format, as previously converted
-# from $build's *nix or MSYS format). In case (3), returns the w32 file name
-# or path in func_cygpath_result (input file name or path is assumed to be in
-# Cygwin format). Returns an empty string on error.
-#
-# ARGS are passed to cygpath, with the last one being the file name or path to
-# be converted.
-#
-# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
-# environment variable; do not put it in $PATH.
-func_cygpath ()
-{
-  $opt_debug
-  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
-    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
-    if test "$?" -ne 0; then
-      # on failure, ensure result is empty
-      func_cygpath_result=
-    fi
-  else
-    func_cygpath_result=
-    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
-  fi
-}
-#end: func_cygpath
-
-
-# func_convert_core_msys_to_w32 ARG
-# Convert file name or path ARG from MSYS format to w32 format.  Return
-# result in func_convert_core_msys_to_w32_result.
-func_convert_core_msys_to_w32 ()
-{
-  $opt_debug
-  # awkward: cmd appends spaces to result
-  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-}
-#end: func_convert_core_msys_to_w32
-
-
-# func_convert_file_check ARG1 ARG2
-# Verify that ARG1 (a file name in $build format) was converted to $host
-# format in ARG2. Otherwise, emit an error message, but continue (resetting
-# func_to_host_file_result to ARG1).
-func_convert_file_check ()
-{
-  $opt_debug
-  if test -z "$2" && test -n "$1" ; then
-    func_error "Could not determine host file name corresponding to"
-    func_error "  \`$1'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback:
-    func_to_host_file_result="$1"
-  fi
-}
-# end func_convert_file_check
-
-
-# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
-# Verify that FROM_PATH (a path in $build format) was converted to $host
-# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
-# func_to_host_file_result to a simplistic fallback value (see below).
-func_convert_path_check ()
-{
-  $opt_debug
-  if test -z "$4" && test -n "$3"; then
-    func_error "Could not determine the host path corresponding to"
-    func_error "  \`$3'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback.  This is a deliberately simplistic "conversion" and
-    # should not be "improved".  See libtool.info.
-    if test "x$1" != "x$2"; then
-      lt_replace_pathsep_chars="s|$1|$2|g"
-      func_to_host_path_result=`echo "$3" |
-        $SED -e "$lt_replace_pathsep_chars"`
-    else
-      func_to_host_path_result="$3"
-    fi
-  fi
-}
-# end func_convert_path_check
-
-
-# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
-# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
-# and appending REPL if ORIG matches BACKPAT.
-func_convert_path_front_back_pathsep ()
-{
-  $opt_debug
-  case $4 in
-  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
-    ;;
-  esac
-  case $4 in
-  $2 ) func_append func_to_host_path_result "$3"
-    ;;
-  esac
-}
-# end func_convert_path_front_back_pathsep
-
-
-##################################################
-# $build to $host FILE NAME CONVERSION FUNCTIONS #
-##################################################
-# invoked via `$to_host_file_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# Result will be available in $func_to_host_file_result.
-
-
-# func_to_host_file ARG
-# Converts the file name ARG from $build format to $host format. Return result
-# in func_to_host_file_result.
-func_to_host_file ()
-{
-  $opt_debug
-  $to_host_file_cmd "$1"
-}
-# end func_to_host_file
-
-
-# func_to_tool_file ARG LAZY
-# converts the file name ARG from $build format to toolchain format. Return
-# result in func_to_tool_file_result.  If the conversion in use is listed
-# in (the comma separated) LAZY, no conversion takes place.
-func_to_tool_file ()
-{
-  $opt_debug
-  case ,$2, in
-    *,"$to_tool_file_cmd",*)
-      func_to_tool_file_result=$1
-      ;;
-    *)
-      $to_tool_file_cmd "$1"
-      func_to_tool_file_result=$func_to_host_file_result
-      ;;
-  esac
-}
-# end func_to_tool_file
-
-
-# func_convert_file_noop ARG
-# Copy ARG to func_to_host_file_result.
-func_convert_file_noop ()
-{
-  func_to_host_file_result="$1"
-}
-# end func_convert_file_noop
-
-
-# func_convert_file_msys_to_w32 ARG
-# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_file_result.
-func_convert_file_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_w32
-
-
-# func_convert_file_cygwin_to_w32 ARG
-# Convert file name ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_file_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
-    # LT_CYGPATH in this case.
-    func_to_host_file_result=`cygpath -m "$1"`
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_cygwin_to_w32
-
-
-# func_convert_file_nix_to_w32 ARG
-# Convert file name ARG from *nix to w32 format.  Requires a wine environment
-# and a working winepath. Returns result in func_to_host_file_result.
-func_convert_file_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_file_wine_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_w32
-
-
-# func_convert_file_msys_to_cygwin ARG
-# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_file_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_msys_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_cygwin
-
-
-# func_convert_file_nix_to_cygwin ARG
-# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
-# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
-# in func_to_host_file_result.
-func_convert_file_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
-    func_convert_core_file_wine_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_cygwin
-
-
-#############################################
-# $build to $host PATH CONVERSION FUNCTIONS #
-#############################################
-# invoked via `$to_host_path_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# The result will be available in $func_to_host_path_result.
-#
-# Path separators are also converted from $build format to $host format.  If
-# ARG begins or ends with a path separator character, it is preserved (but
-# converted to $host format) on output.
-#
-# All path conversion functions are named using the following convention:
-#   file name conversion function    : func_convert_file_X_to_Y ()
-#   path conversion function         : func_convert_path_X_to_Y ()
-# where, for any given $build/$host combination the 'X_to_Y' value is the
-# same.  If conversion functions are added for new $build/$host combinations,
-# the two new functions must follow this pattern, or func_init_to_host_path_cmd
-# will break.
-
-
-# func_init_to_host_path_cmd
-# Ensures that function "pointer" variable $to_host_path_cmd is set to the
-# appropriate value, based on the value of $to_host_file_cmd.
-to_host_path_cmd=
-func_init_to_host_path_cmd ()
-{
-  $opt_debug
-  if test -z "$to_host_path_cmd"; then
-    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-    to_host_path_cmd="func_convert_path_${func_stripname_result}"
-  fi
-}
-
-
-# func_to_host_path ARG
-# Converts the path ARG from $build format to $host format. Return result
-# in func_to_host_path_result.
-func_to_host_path ()
-{
-  $opt_debug
-  func_init_to_host_path_cmd
-  $to_host_path_cmd "$1"
-}
-# end func_to_host_path
-
-
-# func_convert_path_noop ARG
-# Copy ARG to func_to_host_path_result.
-func_convert_path_noop ()
-{
-  func_to_host_path_result="$1"
-}
-# end func_convert_path_noop
-
-
-# func_convert_path_msys_to_w32 ARG
-# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_path_result.
-func_convert_path_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from ARG.  MSYS
-    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
-    # and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_msys_to_w32
-
-
-# func_convert_path_cygwin_to_w32 ARG
-# Convert path ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_path_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_cygwin_to_w32
-
-
-# func_convert_path_nix_to_w32 ARG
-# Convert path ARG from *nix to w32 format.  Requires a wine environment and
-# a working winepath.  Returns result in func_to_host_file_result.
-func_convert_path_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_nix_to_w32
-
-
-# func_convert_path_msys_to_cygwin ARG
-# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_path_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_msys_to_cygwin
-
-
-# func_convert_path_nix_to_cygwin ARG
-# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
-# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
-# func_to_host_file_result.
-func_convert_path_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from
-    # ARG. msys behavior is inconsistent here, cygpath turns them
-    # into '.;' and ';.', and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_nix_to_cygwin
-
-
-# func_mode_compile arg...
-func_mode_compile ()
-{
-    $opt_debug
-    # Get the compilation command and the source file.
-    base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
-    suppress_opt=yes
-    suppress_output=
-    arg_mode=normal
-    libobj=
-    later=
-    pie_flag=
-
-    for arg
-    do
-      case $arg_mode in
-      arg  )
-	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
-	arg_mode=normal
-	;;
-
-      target )
-	libobj="$arg"
-	arg_mode=normal
-	continue
-	;;
-
-      normal )
-	# Accept any command-line options.
-	case $arg in
-	-o)
-	  test -n "$libobj" && \
-	    func_fatal_error "you cannot specify \`-o' more than once"
-	  arg_mode=target
-	  continue
-	  ;;
-
-	-pie | -fpie | -fPIE)
-          func_append pie_flag " $arg"
-	  continue
-	  ;;
-
-	-shared | -static | -prefer-pic | -prefer-non-pic)
-	  func_append later " $arg"
-	  continue
-	  ;;
-
-	-no-suppress)
-	  suppress_opt=no
-	  continue
-	  ;;
-
-	-Xcompiler)
-	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
-	  continue      #  The current "srcfile" will either be retained or
-	  ;;            #  replaced later.  I would guess that would be a bug.
-
-	-Wc,*)
-	  func_stripname '-Wc,' '' "$arg"
-	  args=$func_stripname_result
-	  lastarg=
-	  save_ifs="$IFS"; IFS=','
-	  for arg in $args; do
-	    IFS="$save_ifs"
-	    func_append_quoted lastarg "$arg"
-	  done
-	  IFS="$save_ifs"
-	  func_stripname ' ' '' "$lastarg"
-	  lastarg=$func_stripname_result
-
-	  # Add the arguments to base_compile.
-	  func_append base_compile " $lastarg"
-	  continue
-	  ;;
-
-	*)
-	  # Accept the current argument as the source file.
-	  # The previous "srcfile" becomes the current argument.
-	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
-	  ;;
-	esac  #  case $arg
-	;;
-      esac    #  case $arg_mode
-
-      # Aesthetically quote the previous argument.
-      func_append_quoted base_compile "$lastarg"
-    done # for arg
-
-    case $arg_mode in
-    arg)
-      func_fatal_error "you must specify an argument for -Xcompile"
-      ;;
-    target)
-      func_fatal_error "you must specify a target with \`-o'"
-      ;;
-    *)
-      # Get the name of the library object.
-      test -z "$libobj" && {
-	func_basename "$srcfile"
-	libobj="$func_basename_result"
-      }
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    case $libobj in
-    *.[cCFSifmso] | \
-    *.ada | *.adb | *.ads | *.asm | \
-    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
-      func_xform "$libobj"
-      libobj=$func_xform_result
-      ;;
-    esac
-
-    case $libobj in
-    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
-    *)
-      func_fatal_error "cannot determine name of library object from \`$libobj'"
-      ;;
-    esac
-
-    func_infer_tag $base_compile
-
-    for arg in $later; do
-      case $arg in
-      -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
-	build_old_libs=no
-	continue
-	;;
-
-      -static)
-	build_libtool_libs=no
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-      esac
-    done
-
-    func_quote_for_eval "$libobj"
-    test "X$libobj" != "X$func_quote_for_eval_result" \
-      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
-      && func_warning "libobj name \`$libobj' may not contain shell special characters."
-    func_dirname_and_basename "$obj" "/" ""
-    objname="$func_basename_result"
-    xdir="$func_dirname_result"
-    lobj=${xdir}$objdir/$objname
-
-    test -z "$base_compile" && \
-      func_fatal_help "you must specify a compilation command"
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2* | cegcc*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-	func_echo "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	$ECHO "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-      func_append removelist " $output_obj"
-      $ECHO "$srcfile" > "$lockfile"
-    fi
-
-    $opt_dry_run || $RM $removelist
-    func_append removelist " $lockfile"
-    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
-
-    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
-    srcfile=$func_to_tool_file_result
-    func_quote_for_eval "$srcfile"
-    qsrcfile=$func_quote_for_eval_result
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	command="$base_compile $qsrcfile $pic_flag"
-      else
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      fi
-
-      func_mkdir_p "$xdir$objdir"
-
-      if test -z "$output_obj"; then
-	# Place PIC objects in $objdir
-	func_append command " -o $lobj"
-      fi
-
-      func_show_eval_locale "$command"	\
-          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	func_show_eval '$MV "$output_obj" "$lobj"' \
-	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-
-      # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
-	suppress_output=' >/dev/null 2>&1'
-      fi
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $qsrcfile$pie_flag"
-      else
-	command="$base_compile $qsrcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-	func_append command " -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      func_append command "$suppress_output"
-      func_show_eval_locale "$command" \
-        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	func_show_eval '$MV "$output_obj" "$obj"' \
-	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-    fi
-
-    $opt_dry_run || {
-      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
-
-      # Unlock the critical section if it was locked
-      if test "$need_locks" != no; then
-	removelist=$lockfile
-        $RM "$lockfile"
-      fi
-    }
-
-    exit $EXIT_SUCCESS
-}
-
-$opt_help || {
-  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
-}
-
-func_mode_help ()
-{
-    # We need to display help for each of the modes.
-    case $opt_mode in
-      "")
-        # Generic help is extracted from the usage comments
-        # at the start of this file.
-        func_help
-        ;;
-
-      clean)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      compile)
-      $ECHO \
-"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to build PIC objects only
-  -prefer-non-pic   try to build non-PIC objects only
-  -shared           do not build a \`.o' file suitable for static linking
-  -static           only build a \`.o' file suitable for static linking
-  -Wc,FLAG          pass FLAG directly to the compiler
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-        ;;
-
-      execute)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-        ;;
-
-      finish)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-        ;;
-
-      install)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The following components of INSTALL-COMMAND are treated specially:
-
-  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-        ;;
-
-      link)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -bindir BINDIR    specify path to binaries directory (for systems where
-                    libraries must be found in the PATH setting at runtime)
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -shared           only do dynamic linking of libtool libraries
-  -shrext SUFFIX    override the standard shared library file extension
-  -static           do not do any dynamic linking of uninstalled libtool libraries
-  -static-libtool-libs
-                    do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
-  -weak LIBNAME     declare that the target provides the LIBNAME interface
-  -Wc,FLAG
-  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
-  -Wl,FLAG
-  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
-  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-        ;;
-
-      uninstall)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      *)
-        func_fatal_help "invalid operation mode \`$opt_mode'"
-        ;;
-    esac
-
-    echo
-    $ECHO "Try \`$progname --help' for more information about other modes."
-}
-
-# Now that we've collected a possible --mode arg, show help if necessary
-if $opt_help; then
-  if test "$opt_help" = :; then
-    func_mode_help
-  else
-    {
-      func_help noexit
-      for opt_mode in compile link execute install finish uninstall clean; do
-	func_mode_help
-      done
-    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
-    {
-      func_help noexit
-      for opt_mode in compile link execute install finish uninstall clean; do
-	echo
-	func_mode_help
-      done
-    } |
-    sed '1d
-      /^When reporting/,/^Report/{
-	H
-	d
-      }
-      $x
-      /information about other modes/d
-      /more detailed .*MODE/d
-      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
-  fi
-  exit $?
-fi
-
-
-# func_mode_execute arg...
-func_mode_execute ()
-{
-    $opt_debug
-    # The first argument is the command name.
-    cmd="$nonopt"
-    test -z "$cmd" && \
-      func_fatal_help "you must specify a COMMAND"
-
-    # Handle -dlopen flags immediately.
-    for file in $opt_dlopen; do
-      test -f "$file" \
-	|| func_fatal_help "\`$file' is not a file"
-
-      dir=
-      case $file in
-      *.la)
-	func_resolve_sysroot "$file"
-	file=$func_resolve_sysroot_result
-
-	# Check to see that this really is a libtool archive.
-	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$lib' is not a valid libtool archive"
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-	func_source "$file"
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && \
-	    func_warning "\`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  func_append dir "/$objdir"
-	else
-	  if test ! -f "$dir/$dlname"; then
-	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
-	  fi
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
-	;;
-
-      *)
-	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -* | *.la | *.lo ) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if func_ltwrapper_script_p "$file"; then
-	  func_source "$file"
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	elif func_ltwrapper_executable_p "$file"; then
-	  func_ltwrapper_scriptname "$file"
-	  func_source "$func_ltwrapper_scriptname_result"
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      func_append_quoted args "$file"
-    done
-
-    if test "X$opt_dry_run" = Xfalse; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
-
-      # Restore saved environment variables
-      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-      do
-	eval "if test \"\${save_$lt_var+set}\" = set; then
-                $lt_var=\$save_$lt_var; export $lt_var
-	      else
-		$lt_unset $lt_var
-	      fi"
-      done
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	echo "export $shlibpath_var"
-      fi
-      $ECHO "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-}
-
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
-
-
-# func_mode_finish arg...
-func_mode_finish ()
-{
-    $opt_debug
-    libs=
-    libdirs=
-    admincmds=
-
-    for opt in "$nonopt" ${1+"$@"}
-    do
-      if test -d "$opt"; then
-	func_append libdirs " $opt"
-
-      elif test -f "$opt"; then
-	if func_lalib_unsafe_p "$opt"; then
-	  func_append libs " $opt"
-	else
-	  func_warning "\`$opt' is not a valid libtool archive"
-	fi
-
-      else
-	func_fatal_error "invalid argument \`$opt'"
-      fi
-    done
-
-    if test -n "$libs"; then
-      if test -n "$lt_sysroot"; then
-        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
-        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
-      else
-        sysroot_cmd=
-      fi
-
-      # Remove sysroot references
-      if $opt_dry_run; then
-        for lib in $libs; do
-          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
-        done
-      else
-        tmpdir=`func_mktempdir`
-        for lib in $libs; do
-	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
-	    > $tmpdir/tmp-la
-	  mv -f $tmpdir/tmp-la $lib
-	done
-        ${RM}r "$tmpdir"
-      fi
-    fi
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
-'"$cmd"'"'
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $opt_dry_run || eval "$cmds" || func_append admincmds "
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    $opt_silent && exit $EXIT_SUCCESS
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      echo "----------------------------------------------------------------------"
-      echo "Libraries have been installed in:"
-      for libdir in $libdirs; do
-	$ECHO "   $libdir"
-      done
-      echo
-      echo "If you ever happen to want to link against installed libraries"
-      echo "in a given directory, LIBDIR, you must either use libtool, and"
-      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-      echo "flag during linking and do at least one of the following:"
-      if test -n "$shlibpath_var"; then
-	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-	echo "     during execution"
-      fi
-      if test -n "$runpath_var"; then
-	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-	echo "     during linking"
-      fi
-      if test -n "$hardcode_libdir_flag_spec"; then
-	libdir=LIBDIR
-	eval flag=\"$hardcode_libdir_flag_spec\"
-
-	$ECHO "   - use the \`$flag' linker flag"
-      fi
-      if test -n "$admincmds"; then
-	$ECHO "   - have your system administrator run these commands:$admincmds"
-      fi
-      if test -f /etc/ld.so.conf; then
-	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-      fi
-      echo
-
-      echo "See any operating system documentation about shared libraries for"
-      case $host in
-	solaris2.[6789]|solaris2.1[0-9])
-	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-	  echo "pages."
-	  ;;
-	*)
-	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
-	  ;;
-      esac
-      echo "----------------------------------------------------------------------"
-    fi
-    exit $EXIT_SUCCESS
-}
-
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
-
-
-# func_mode_install arg...
-func_mode_install ()
-{
-    $opt_debug
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac; then
-      # Aesthetically quote it.
-      func_quote_for_eval "$nonopt"
-      install_prog="$func_quote_for_eval_result "
-      arg=$1
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    func_quote_for_eval "$arg"
-    func_append install_prog "$func_quote_for_eval_result"
-    install_shared_prog=$install_prog
-    case " $install_prog " in
-      *[\\\ /]cp\ *) install_cp=: ;;
-      *) install_cp=false ;;
-    esac
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    no_mode=:
-    for arg
-    do
-      arg2=
-      if test -n "$dest"; then
-	func_append files " $dest"
-	dest=$arg
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f)
-	if $install_cp; then :; else
-	  prev=$arg
-	fi
-	;;
-      -g | -m | -o)
-	prev=$arg
-	;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
-	    arg2=$install_override_mode
-	    no_mode=false
-	  fi
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      func_quote_for_eval "$arg"
-      func_append install_prog " $func_quote_for_eval_result"
-      if test -n "$arg2"; then
-	func_quote_for_eval "$arg2"
-      fi
-      func_append install_shared_prog " $func_quote_for_eval_result"
-    done
-
-    test -z "$install_prog" && \
-      func_fatal_help "you must specify an install program"
-
-    test -n "$prev" && \
-      func_fatal_help "the \`$prev' option requires an argument"
-
-    if test -n "$install_override_mode" && $no_mode; then
-      if $install_cp; then :; else
-	func_quote_for_eval "$install_override_mode"
-	func_append install_shared_prog " -m $func_quote_for_eval_result"
-      fi
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	func_fatal_help "no file or destination specified"
-      else
-	func_fatal_help "you must specify a destination"
-      fi
-    fi
-
-    # Strip any trailing slash from the destination.
-    func_stripname '' '/' "$dest"
-    dest=$func_stripname_result
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      func_dirname_and_basename "$dest" "" "."
-      destdir="$func_dirname_result"
-      destname="$func_basename_result"
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files; shift
-      test "$#" -gt 1 && \
-	func_fatal_help "\`$dest' is not a directory"
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  func_fatal_help "\`$destdir' must be an absolute directory name"
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	func_append staticlibs " $file"
-	;;
-
-      *.la)
-	func_resolve_sysroot "$file"
-	file=$func_resolve_sysroot_result
-
-	# Check to see that this really is a libtool archive.
-	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$file' is not a valid libtool archive"
-
-	library_names=
-	old_library=
-	relink_command=
-	func_source "$file"
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) func_append current_libdirs " $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) func_append future_libdirs " $libdir" ;;
-	  esac
-	fi
-
-	func_dirname "$file" "/" ""
-	dir="$func_dirname_result"
-	func_append dir "$objdir"
-
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
-
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  test "$inst_prefix_dir" = "$destdir" && \
-	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
-
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-	  else
-	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
-	  fi
-
-	  func_warning "relinking \`$file'"
-	  func_show_eval "$relink_command" \
-	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names; shift
-	if test -n "$1"; then
-	  realname="$1"
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
-	      'exit $?'
-	  tstripme="$stripme"
-	  case $host_os in
-	  cygwin* | mingw* | pw32* | cegcc*)
-	    case $realname in
-	    *.dll.a)
-	      tstripme=""
-	      ;;
-	    esac
-	    ;;
-	  esac
-	  if test -n "$tstripme" && test -n "$striplib"; then
-	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      test "$linkname" != "$realname" \
-		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  func_execute_cmds "$postinstall_cmds" 'exit $?'
-	fi
-
-	# Install the pseudo-library for information purposes.
-	func_basename "$file"
-	name="$func_basename_result"
-	instname="$dir/$name"i
-	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  func_lo2o "$destfile"
-	  staticdest=$func_lo2o_result
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	test -n "$destfile" && \
-	  func_show_eval "$install_prog $file $destfile" 'exit $?'
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  func_lo2o "$file"
-	  staticobj=$func_lo2o_result
-	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
-	fi
-	exit $EXIT_SUCCESS
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
-	fi
-
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      func_stripname '' '.exe' "$file"
-	      file=$func_stripname_result
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin* | *mingw*)
-	    if func_ltwrapper_executable_p "$file"; then
-	      func_ltwrapper_scriptname "$file"
-	      wrapper=$func_ltwrapper_scriptname_result
-	    else
-	      func_stripname '' '.exe' "$file"
-	      wrapper=$func_stripname_result
-	    fi
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if func_ltwrapper_script_p "$wrapper"; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  func_source "$wrapper"
-
-	  # Check the variables that should have been set.
-	  test -z "$generated_by_libtool_version" && \
-	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      func_source "$lib"
-	    fi
-	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      func_warning "\`$lib' has not been installed in \`$libdir'"
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  func_source "$wrapper"
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    $opt_dry_run || {
-	      if test "$finalize" = yes; then
-	        tmpdir=`func_mktempdir`
-		func_basename "$file$stripped_ext"
-		file="$func_basename_result"
-	        outputname="$tmpdir/$file"
-	        # Replace the output file specification.
-	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
-
-	        $opt_silent || {
-	          func_quote_for_expand "$relink_command"
-		  eval "func_echo $func_quote_for_expand_result"
-	        }
-	        if eval "$relink_command"; then :
-	          else
-		  func_error "error: relink \`$file' with the above command before installing it"
-		  $opt_dry_run || ${RM}r "$tmpdir"
-		  continue
-	        fi
-	        file="$outputname"
-	      else
-	        func_warning "cannot relink \`$file'"
-	      fi
-	    }
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    func_stripname '' '.exe' "$destfile"
-	    destfile=$func_stripname_result
-	    ;;
-	  esac
-	  ;;
-	esac
-	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
-	$opt_dry_run || if test -n "$outputname"; then
-	  ${RM}r "$tmpdir"
-	fi
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      func_basename "$file"
-      name="$func_basename_result"
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
-      tool_oldlib=$func_to_tool_file_result
-
-      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
-      fi
-
-      # Do each command in the postinstall commands.
-      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
-    done
-
-    test -n "$future_libdirs" && \
-      func_warning "remember to run \`$progname --finish$future_libdirs'"
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      $opt_dry_run && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-}
-
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
-
-
-# func_generate_dlsyms outputname originator pic_p
-# Extract symbols from dlprefiles and create ${outputname}S.o with
-# a dlpreopen symbol table.
-func_generate_dlsyms ()
-{
-    $opt_debug
-    my_outputname="$1"
-    my_originator="$2"
-    my_pic_p="${3-no}"
-    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
-    my_dlsyms=
-
-    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-      if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	my_dlsyms="${my_outputname}S.c"
-      else
-	func_error "not configured to extract global symbols from dlpreopened files"
-      fi
-    fi
-
-    if test -n "$my_dlsyms"; then
-      case $my_dlsyms in
-      "") ;;
-      *.c)
-	# Discover the nlist of each of the dlfiles.
-	nlist="$output_objdir/${my_outputname}.nm"
-
-	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
-
-	# Parse the name list into a source file.
-	func_verbose "creating $output_objdir/$my_dlsyms"
-
-	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#endif
-
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
-   relocations are performed -- see ld's documentation on pseudo-relocs.  */
-# define LT_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data.  */
-# define LT_DLSYM_CONST
-#else
-# define LT_DLSYM_CONST const
-#endif
-
-/* External symbol declarations for the compiler. */\
-"
-
-	if test "$dlself" = yes; then
-	  func_verbose "generating symbol list for \`$output'"
-
-	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
-
-	  # Add our own program objects to the symbol list.
-	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
-	  for progfile in $progfiles; do
-	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
-	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
-	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -n "$exclude_expsyms"; then
-	    $opt_dry_run || {
-	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	    }
-	  fi
-
-	  if test -n "$export_symbols_regex"; then
-	    $opt_dry_run || {
-	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	    }
-	  fi
-
-	  # Prepare the list of exported symbols
-	  if test -z "$export_symbols"; then
-	    export_symbols="$output_objdir/$outputname.exp"
-	    $opt_dry_run || {
-	      $RM $export_symbols
-	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-	      case $host in
-	      *cygwin* | *mingw* | *cegcc* )
-                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-	        ;;
-	      esac
-	    }
-	  else
-	    $opt_dry_run || {
-	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	      case $host in
-	        *cygwin* | *mingw* | *cegcc* )
-	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-	          ;;
-	      esac
-	    }
-	  fi
-	fi
-
-	for dlprefile in $dlprefiles; do
-	  func_verbose "extracting global C symbols from \`$dlprefile'"
-	  func_basename "$dlprefile"
-	  name="$func_basename_result"
-          case $host in
-	    *cygwin* | *mingw* | *cegcc* )
-	      # if an import library, we need to obtain dlname
-	      if func_win32_import_lib_p "$dlprefile"; then
-	        func_tr_sh "$dlprefile"
-	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
-	        dlprefile_dlbasename=""
-	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
-	          # Use subshell, to avoid clobbering current variable values
-	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
-	          if test -n "$dlprefile_dlname" ; then
-	            func_basename "$dlprefile_dlname"
-	            dlprefile_dlbasename="$func_basename_result"
-	          else
-	            # no lafile. user explicitly requested -dlpreopen <import library>.
-	            $sharedlib_from_linklib_cmd "$dlprefile"
-	            dlprefile_dlbasename=$sharedlib_from_linklib_result
-	          fi
-	        fi
-	        $opt_dry_run || {
-	          if test -n "$dlprefile_dlbasename" ; then
-	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
-	          else
-	            func_warning "Could not compute DLL name from $name"
-	            eval '$ECHO ": $name " >> "$nlist"'
-	          fi
-	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
-	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
-	        }
-	      else # not an import lib
-	        $opt_dry_run || {
-	          eval '$ECHO ": $name " >> "$nlist"'
-	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-	        }
-	      fi
-	    ;;
-	    *)
-	      $opt_dry_run || {
-	        eval '$ECHO ": $name " >> "$nlist"'
-	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-	      }
-	    ;;
-          esac
-	done
-
-	$opt_dry_run || {
-	  # Make sure we have at least an empty file.
-	  test -f "$nlist" || : > "$nlist"
-
-	  if test -n "$exclude_expsyms"; then
-	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	    $MV "$nlist"T "$nlist"
-	  fi
-
-	  # Try sorting and uniquifying the output.
-	  if $GREP -v "^: " < "$nlist" |
-	      if sort -k 3 </dev/null >/dev/null 2>&1; then
-		sort -k 3
-	      else
-		sort +2
-	      fi |
-	      uniq > "$nlist"S; then
-	    :
-	  else
-	    $GREP -v "^: " < "$nlist" > "$nlist"S
-	  fi
-
-	  if test -f "$nlist"S; then
-	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
-	  else
-	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
-	  fi
-
-	  echo >> "$output_objdir/$my_dlsyms" "\
-
-/* The mapping between symbol names and symbols.  */
-typedef struct {
-  const char *name;
-  void *address;
-} lt_dlsymlist;
-extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
-LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
-  { \"$my_originator\", (void *) 0 },"
-
-	  case $need_lib_prefix in
-	  no)
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
-	    ;;
-	  *)
-	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
-	    ;;
-	  esac
-	  echo >> "$output_objdir/$my_dlsyms" "\
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_${my_prefix}_LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	} # !$opt_dry_run
-
-	pic_flag_for_symtable=
-	case "$compile_command " in
-	*" -static "*) ;;
-	*)
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
-	  *-*-hpux*)
-	    pic_flag_for_symtable=" $pic_flag"  ;;
-	  *)
-	    if test "X$my_pic_p" != Xno; then
-	      pic_flag_for_symtable=" $pic_flag"
-	    fi
-	    ;;
-	  esac
-	  ;;
-	esac
-	symtab_cflags=
-	for arg in $LTCFLAGS; do
-	  case $arg in
-	  -pie | -fpie | -fPIE) ;;
-	  *) func_append symtab_cflags " $arg" ;;
-	  esac
-	done
-
-	# Now compile the dynamic symbol file.
-	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
-
-	# Clean up the generated files.
-	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
-
-	# Transform the symbol file into the correct name.
-	symfileobj="$output_objdir/${my_outputname}S.$objext"
-	case $host in
-	*cygwin* | *mingw* | *cegcc* )
-	  if test -f "$output_objdir/$my_outputname.def"; then
-	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	  else
-	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	  fi
-	  ;;
-	*)
-	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	  ;;
-	esac
-	;;
-      *)
-	func_fatal_error "unknown suffix for \`$my_dlsyms'"
-	;;
-      esac
-    else
-      # We keep going just in case the user didn't refer to
-      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-      # really was required.
-
-      # Nullify the symbol file.
-      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
-    fi
-}
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-# Despite the name, also deal with 64 bit binaries.
-func_win32_libid ()
-{
-  $opt_debug
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-      func_to_tool_file "$1" func_convert_file_msys_to_w32
-      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
-	$SED -n -e '
-	    1,100{
-		/ I /{
-		    s,.*,import,
-		    p
-		    q
-		}
-	    }'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
-    ;;
-  esac
-  $ECHO "$win32_libid_type"
-}
-
-# func_cygming_dll_for_implib ARG
-#
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-# Invoked by eval'ing the libtool variable
-#    $sharedlib_from_linklib_cmd
-# Result is available in the variable
-#    $sharedlib_from_linklib_result
-func_cygming_dll_for_implib ()
-{
-  $opt_debug
-  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
-}
-
-# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
-#
-# The is the core of a fallback implementation of a
-# platform-specific function to extract the name of the
-# DLL associated with the specified import library LIBNAME.
-#
-# SECTION_NAME is either .idata$6 or .idata$7, depending
-# on the platform and compiler that created the implib.
-#
-# Echos the name of the DLL associated with the
-# specified import library.
-func_cygming_dll_for_implib_fallback_core ()
-{
-  $opt_debug
-  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
-  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
-    $SED '/^Contents of section '"$match_literal"':/{
-      # Place marker at beginning of archive member dllname section
-      s/.*/====MARK====/
-      p
-      d
-    }
-    # These lines can sometimes be longer than 43 characters, but
-    # are always uninteresting
-    /:[	 ]*file format pe[i]\{,1\}-/d
-    /^In archive [^:]*:/d
-    # Ensure marker is printed
-    /^====MARK====/p
-    # Remove all lines with less than 43 characters
-    /^.\{43\}/!d
-    # From remaining lines, remove first 43 characters
-    s/^.\{43\}//' |
-    $SED -n '
-      # Join marker and all lines until next marker into a single line
-      /^====MARK====/ b para
-      H
-      $ b para
-      b
-      :para
-      x
-      s/\n//g
-      # Remove the marker
-      s/^====MARK====//
-      # Remove trailing dots and whitespace
-      s/[\. \t]*$//
-      # Print
-      /./p' |
-    # we now have a list, one entry per line, of the stringified
-    # contents of the appropriate section of all members of the
-    # archive which possess that section. Heuristic: eliminate
-    # all those which have a first or second character that is
-    # a '.' (that is, objdump's representation of an unprintable
-    # character.) This should work for all archives with less than
-    # 0x302f exports -- but will fail for DLLs whose name actually
-    # begins with a literal '.' or a single character followed by
-    # a '.'.
-    #
-    # Of those that remain, print the first one.
-    $SED -e '/^\./d;/^.\./d;q'
-}
-
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
-  test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
-  test -n "$func_cygming_ms_implib_tmp"
-}
-
-# func_cygming_dll_for_implib_fallback ARG
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-#
-# This fallback implementation is for use when $DLLTOOL
-# does not support the --identify-strict option.
-# Invoked by eval'ing the libtool variable
-#    $sharedlib_from_linklib_cmd
-# Result is available in the variable
-#    $sharedlib_from_linklib_result
-func_cygming_dll_for_implib_fallback ()
-{
-  $opt_debug
-  if func_cygming_gnu_implib_p "$1" ; then
-    # binutils import library
-    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
-  elif func_cygming_ms_implib_p "$1" ; then
-    # ms-generated import library
-    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
-  else
-    # unknown
-    sharedlib_from_linklib_result=""
-  fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    $opt_debug
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-    if test "$lock_old_archive_extraction" = yes; then
-      lockfile=$f_ex_an_ar_oldlib.lock
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-	func_echo "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    fi
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
-		   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test "$lock_old_archive_extraction" = yes; then
-      $opt_dry_run || rm -f "$lockfile"
-    fi
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
-    fi
-}
-
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
-    $opt_debug
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      func_basename "$my_xlib"
-      my_xlib="$func_basename_result"
-      my_xlib_u=$my_xlib
-      while :; do
-        case " $extracted_archives " in
-	*" $my_xlib_u "*)
-	  func_arith $extracted_serial + 1
-	  extracted_serial=$func_arith_result
-	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
-	*) break ;;
-	esac
-      done
-      extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
-
-      func_mkdir_p "$my_xdir"
-
-      case $host in
-      *-darwin*)
-	func_verbose "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	$opt_dry_run || {
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`basename "$darwin_archive"`
-	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
-	  if test -n "$darwin_arches"; then
-	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
-	      $LIPO -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    $RM -rf unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd $darwin_orig_dir
-	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	} # !$opt_dry_run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-	;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
-    done
-
-    func_extract_archives_result="$my_oldobjs"
-}
-
-
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
-	func_emit_wrapper_arg1=${1-no}
-
-	$ECHO "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='$macro_version'
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$ECHO are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    file=\"\$0\""
-
-    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
-    $ECHO "\
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-    ECHO=\"$qECHO\"
-  fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's $0 value, followed by "$@".
-lt_option_debug=
-func_parse_lt_options ()
-{
-  lt_script_arg0=\$0
-  shift
-  for lt_opt
-  do
-    case \"\$lt_opt\" in
-    --lt-debug) lt_option_debug=1 ;;
-    --lt-dump-script)
-        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
-        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
-        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
-        cat \"\$lt_dump_D/\$lt_dump_F\"
-        exit 0
-      ;;
-    --lt-*)
-        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
-        exit 1
-      ;;
-    esac
-  done
-
-  # Print the debug banner immediately:
-  if test -n \"\$lt_option_debug\"; then
-    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
-  fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
-  lt_dump_args_N=1;
-  for lt_arg
-  do
-    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
-    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
-  done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-"
-  case $host in
-  # Backslashes separate directories on plain windows
-  *-*-mingw | *-*-os2* | *-cegcc*)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-    ;;
-
-  *)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-    ;;
-  esac
-  $ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from \$@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
-  case \" \$* \" in
-  *\\ --lt-*)
-    for lt_wr_arg
-    do
-      case \$lt_wr_arg in
-      --lt-*) ;;
-      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
-      esac
-      shift
-    done ;;
-  esac
-  func_exec_program_core \${1+\"\$@\"}
-}
-
-  # Parse options
-  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
-  done
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
-  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
-    # special case for '.'
-    if test \"\$thisdir\" = \".\"; then
-      thisdir=\`pwd\`
-    fi
-    # remove .libs from thisdir
-    case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
-    $objdir )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  $ECHO "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" ||
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $MKDIR \"\$progdir\"
-    else
-      $RM \"\$progdir/\$file\"
-    fi"
-
-	  $ECHO "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$ECHO \"\$relink_command_output\" >&2
-	$RM \"\$progdir/\$file\"
-	exit 1
-      fi
-    fi
-
-    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $RM \"\$progdir/\$program\";
-      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $RM \"\$progdir/\$file\"
-  fi"
-	else
-	  $ECHO "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	$ECHO "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# fixup the dll searchpath if we need to.
-	#
-	# Fix the DLL searchpath if we need to.  Do this before prepending
-	# to shlibpath, because on Windows, both are PATH and uninstalled
-	# libraries must come first.
-	if test -n "$dllsearchpath"; then
-	  $ECHO "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $ECHO "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	$ECHO "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-      func_exec_program \${1+\"\$@\"}
-    fi
-  else
-    # The program doesn't exist.
-    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
-  fi
-fi\
-"
-}
-
-
-# func_emit_cwrapperexe_src
-# emit the source code for a wrapper executable on stdout
-# Must ONLY be called from within func_mode_link because
-# it depends on a number of variable set therein.
-func_emit_cwrapperexe_src ()
-{
-	cat <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-*/
-EOF
-	    cat <<"EOF"
-#ifdef _MSC_VER
-# define _CRT_SECURE_NO_DEPRECATE 1
-#endif
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef _MSC_VER
-# include <direct.h>
-# include <process.h>
-# include <io.h>
-#else
-# include <unistd.h>
-# include <stdint.h>
-# ifdef __CYGWIN__
-#  include <io.h>
-# endif
-#endif
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-
-/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
-# ifdef __STRICT_ANSI__
-int _putenv (const char *);
-# endif
-#elif defined(__CYGWIN__)
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
-/* #elif defined (other platforms) ... */
-#endif
-
-/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-#  define _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#elif defined(__MINGW32__)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-#elif defined(__CYGWIN__)
-# define HAVE_SETENV
-# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
-#endif
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef S_IXOTH
-# define S_IXOTH 0
-#endif
-#ifndef S_IXGRP
-# define S_IXGRP 0
-#endif
-
-/* path handling portability macros */
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# define FOPEN_WB "wb"
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#ifndef FOPEN_WB
-# define FOPEN_WB "w"
-#endif
-#ifndef _O_BINARY
-# define _O_BINARY 0
-#endif
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-#if defined(LT_DEBUGWRAPPER)
-static int lt_debug = 1;
-#else
-static int lt_debug = 0;
-#endif
-
-const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
-
-void *xmalloc (size_t num);
-char *xstrdup (const char *string);
-const char *base_name (const char *name);
-char *find_executable (const char *wrapper);
-char *chase_symlinks (const char *pathspec);
-int make_executable (const char *path);
-int check_executable (const char *path);
-char *strendzap (char *str, const char *pat);
-void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-void lt_fatal (const char *file, int line, const char *message, ...);
-static const char *nonnull (const char *s);
-static const char *nonempty (const char *s);
-void lt_setenv (const char *name, const char *value);
-char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_update_exe_path (const char *name, const char *value);
-void lt_update_lib_path (const char *name, const char *value);
-char **prepare_spawn (char **argv);
-void lt_dump_script (FILE *f);
-EOF
-
-	    cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
-const char * LIB_PATH_VARNAME = "$shlibpath_var";
-EOF
-
-	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-              func_to_host_path "$temp_rpath"
-	      cat <<EOF
-const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
-EOF
-	    else
-	      cat <<"EOF"
-const char * LIB_PATH_VALUE   = "";
-EOF
-	    fi
-
-	    if test -n "$dllsearchpath"; then
-              func_to_host_path "$dllsearchpath:"
-	      cat <<EOF
-const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
-EOF
-	    else
-	      cat <<"EOF"
-const char * EXE_PATH_VARNAME = "";
-const char * EXE_PATH_VALUE   = "";
-EOF
-	    fi
-
-	    if test "$fast_install" = yes; then
-	      cat <<EOF
-const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
-EOF
-	    else
-	      cat <<EOF
-const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
-EOF
-	    fi
-
-
-	    cat <<"EOF"
-
-#define LTWRAPPER_OPTION_PREFIX         "--lt-"
-
-static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int  newargc;
-  char *tmp_pathspec;
-  char *actual_cwrapper_path;
-  char *actual_cwrapper_name;
-  char *target_name;
-  char *lt_argv_zero;
-  intptr_t rval = 127;
-
-  int i;
-
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  newargz = XMALLOC (char *, argc + 1);
-
-  /* very simple arg parsing; don't want to rely on getopt
-   * also, copy all non cwrapper options to newargz, except
-   * argz[0], which is handled differently
-   */
-  newargc=0;
-  for (i = 1; i < argc; i++)
-    {
-      if (strcmp (argv[i], dumpscript_opt) == 0)
-	{
-EOF
-	    case "$host" in
-	      *mingw* | *cygwin* )
-		# make stdout use "unix" line endings
-		echo "          setmode(1,_O_BINARY);"
-		;;
-	      esac
-
-	    cat <<"EOF"
-	  lt_dump_script (stdout);
-	  return 0;
-	}
-      if (strcmp (argv[i], debug_opt) == 0)
-	{
-          lt_debug = 1;
-          continue;
-	}
-      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal (__FILE__, __LINE__,
-		    "unrecognized %s option: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
-    }
-  newargz[++newargc] = NULL;
-
-EOF
-	    cat <<EOF
-  /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-EOF
-	    cat <<"EOF"
-  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
-
-  tmp_pathspec = find_executable (argv[0]);
-  if (tmp_pathspec == NULL)
-    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (before symlink chase) at: %s\n",
-		  tmp_pathspec);
-
-  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (after symlink chase) at: %s\n",
-		  actual_cwrapper_path);
-  XFREE (tmp_pathspec);
-
-  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
-  strendzap (actual_cwrapper_path, actual_cwrapper_name);
-
-  /* wrapper name transforms */
-  strendzap (actual_cwrapper_name, ".exe");
-  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
-  XFREE (actual_cwrapper_name);
-  actual_cwrapper_name = tmp_pathspec;
-  tmp_pathspec = 0;
-
-  /* target_name transforms -- use actual target program name; might have lt- prefix */
-  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
-  strendzap (target_name, ".exe");
-  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
-  XFREE (target_name);
-  target_name = tmp_pathspec;
-  tmp_pathspec = 0;
-
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(main) libtool target name: %s\n",
-		  target_name);
-EOF
-
-	    cat <<EOF
-  newargz[0] =
-    XMALLOC (char, (strlen (actual_cwrapper_path) +
-		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
-  strcpy (newargz[0], actual_cwrapper_path);
-  strcat (newargz[0], "$objdir");
-  strcat (newargz[0], "/");
-EOF
-
-	    cat <<"EOF"
-  /* stop here, and copy so we don't have to do this twice */
-  tmp_pathspec = xstrdup (newargz[0]);
-
-  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
-  strcat (newargz[0], actual_cwrapper_name);
-
-  /* DO want the lt- prefix here if it exists, so use target_name */
-  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
-  XFREE (tmp_pathspec);
-  tmp_pathspec = NULL;
-EOF
-
-	    case $host_os in
-	      mingw*)
-	    cat <<"EOF"
-  {
-    char* p;
-    while ((p = strchr (newargz[0], '\\')) != NULL)
-      {
-	*p = '/';
-      }
-    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
-      {
-	*p = '/';
-      }
-  }
-EOF
-	    ;;
-	    esac
-
-	    cat <<"EOF"
-  XFREE (target_name);
-  XFREE (actual_cwrapper_path);
-  XFREE (actual_cwrapper_name);
-
-  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
-  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
-  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
-     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
-     because on Windows, both *_VARNAMEs are PATH but uninstalled
-     libraries must come first. */
-  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
-  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
-
-  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
-		  nonnull (lt_argv_zero));
-  for (i = 0; i < newargc; i++)
-    {
-      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
-		      i, nonnull (newargz[i]));
-    }
-
-EOF
-
-	    case $host_os in
-	      mingw*)
-		cat <<"EOF"
-  /* execv doesn't actually work on mingw as expected on unix */
-  newargz = prepare_spawn (newargz);
-  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
-  if (rval == -1)
-    {
-      /* failed to start process */
-      lt_debugprintf (__FILE__, __LINE__,
-		      "(main) failed to launch target \"%s\": %s\n",
-		      lt_argv_zero, nonnull (strerror (errno)));
-      return 127;
-    }
-  return rval;
-EOF
-		;;
-	      *)
-		cat <<"EOF"
-  execv (lt_argv_zero, newargz);
-  return rval; /* =127, but avoids unused variable warning */
-EOF
-		;;
-	    esac
-
-	    cat <<"EOF"
-}
-
-void *
-xmalloc (size_t num)
-{
-  void *p = (void *) malloc (num);
-  if (!p)
-    lt_fatal (__FILE__, __LINE__, "memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
-			  string) : NULL;
-}
-
-const char *
-base_name (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-
-int
-check_executable (const char *path)
-{
-  struct stat st;
-
-  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
-                  nonempty (path));
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0)
-      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
-    return 1;
-  else
-    return 0;
-}
-
-int
-make_executable (const char *path)
-{
-  int rval = 0;
-  struct stat st;
-
-  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
-                  nonempty (path));
-  if ((!path) || (!*path))
-    return 0;
-
-  if (stat (path, &st) >= 0)
-    {
-      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
-    }
-  return rval;
-}
-
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise
-   Does not chase symlinks, even on platforms that support them.
-*/
-char *
-find_executable (const char *wrapper)
-{
-  int has_slash = 0;
-  const char *p;
-  const char *p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char *concat_name;
-
-  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
-                  nonempty (wrapper));
-
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable (concat_name))
-	return concat_name;
-      XFREE (concat_name);
-    }
-  else
-    {
-#endif
-      if (IS_DIR_SEPARATOR (wrapper[0]))
-	{
-	  concat_name = xstrdup (wrapper);
-	  if (check_executable (concat_name))
-	    return concat_name;
-	  XFREE (concat_name);
-	}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-    }
-#endif
-
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-      {
-	has_slash = 1;
-	break;
-      }
-  if (!has_slash)
-    {
-      /* no slashes; search PATH */
-      const char *path = getenv ("PATH");
-      if (path != NULL)
-	{
-	  for (p = path; *p; p = p_next)
-	    {
-	      const char *q;
-	      size_t p_len;
-	      for (q = p; *q; q++)
-		if (IS_PATH_SEPARATOR (*q))
-		  break;
-	      p_len = q - p;
-	      p_next = (*q == '\0' ? q : q + 1);
-	      if (p_len == 0)
-		{
-		  /* empty path: current directory */
-		  if (getcwd (tmp, LT_PATHMAX) == NULL)
-		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-                              nonnull (strerror (errno)));
-		  tmp_len = strlen (tmp);
-		  concat_name =
-		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-		  memcpy (concat_name, tmp, tmp_len);
-		  concat_name[tmp_len] = '/';
-		  strcpy (concat_name + tmp_len + 1, wrapper);
-		}
-	      else
-		{
-		  concat_name =
-		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
-		  memcpy (concat_name, p, p_len);
-		  concat_name[p_len] = '/';
-		  strcpy (concat_name + p_len + 1, wrapper);
-		}
-	      if (check_executable (concat_name))
-		return concat_name;
-	      XFREE (concat_name);
-	    }
-	}
-      /* not found in PATH; assume curdir */
-    }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-              nonnull (strerror (errno)));
-  tmp_len = strlen (tmp);
-  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-
-  if (check_executable (concat_name))
-    return concat_name;
-  XFREE (concat_name);
-  return NULL;
-}
-
-char *
-chase_symlinks (const char *pathspec)
-{
-#ifndef S_ISLNK
-  return xstrdup (pathspec);
-#else
-  char buf[LT_PATHMAX];
-  struct stat s;
-  char *tmp_pathspec = xstrdup (pathspec);
-  char *p;
-  int has_symlinks = 0;
-  while (strlen (tmp_pathspec) && !has_symlinks)
-    {
-      lt_debugprintf (__FILE__, __LINE__,
-		      "checking path component for symlinks: %s\n",
-		      tmp_pathspec);
-      if (lstat (tmp_pathspec, &s) == 0)
-	{
-	  if (S_ISLNK (s.st_mode) != 0)
-	    {
-	      has_symlinks = 1;
-	      break;
-	    }
-
-	  /* search backwards for last DIR_SEPARATOR */
-	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
-	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-	    p--;
-	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-	    {
-	      /* no more DIR_SEPARATORS left */
-	      break;
-	    }
-	  *p = '\0';
-	}
-      else
-	{
-	  lt_fatal (__FILE__, __LINE__,
-		    "error accessing file \"%s\": %s",
-		    tmp_pathspec, nonnull (strerror (errno)));
-	}
-    }
-  XFREE (tmp_pathspec);
-
-  if (!has_symlinks)
-    {
-      return xstrdup (pathspec);
-    }
-
-  tmp_pathspec = realpath (pathspec, buf);
-  if (tmp_pathspec == 0)
-    {
-      lt_fatal (__FILE__, __LINE__,
-		"could not follow symlinks for %s", pathspec);
-    }
-  return xstrdup (tmp_pathspec);
-#endif
-}
-
-char *
-strendzap (char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert (str != NULL);
-  assert (pat != NULL);
-
-  len = strlen (str);
-  patlen = strlen (pat);
-
-  if (patlen <= len)
-    {
-      str += len - patlen;
-      if (strcmp (str, pat) == 0)
-	*str = '\0';
-    }
-  return str;
-}
-
-void
-lt_debugprintf (const char *file, int line, const char *fmt, ...)
-{
-  va_list args;
-  if (lt_debug)
-    {
-      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
-      va_start (args, fmt);
-      (void) vfprintf (stderr, fmt, args);
-      va_end (args);
-    }
-}
-
-static void
-lt_error_core (int exit_status, const char *file,
-	       int line, const char *mode,
-	       const char *message, va_list ap)
-{
-  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *file, int line, const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
-  va_end (ap);
-}
-
-static const char *
-nonnull (const char *s)
-{
-  return s ? s : "(null)";
-}
-
-static const char *
-nonempty (const char *s)
-{
-  return (s && !*s) ? "(empty)" : nonnull (s);
-}
-
-void
-lt_setenv (const char *name, const char *value)
-{
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_setenv) setting '%s' to '%s'\n",
-                  nonnull (name), nonnull (value));
-  {
-#ifdef HAVE_SETENV
-    /* always make a copy, for consistency with !HAVE_SETENV */
-    char *str = xstrdup (value);
-    setenv (name, str, 1);
-#else
-    int len = strlen (name) + 1 + strlen (value) + 1;
-    char *str = XMALLOC (char, len);
-    sprintf (str, "%s=%s", name, value);
-    if (putenv (str) != EXIT_SUCCESS)
-      {
-        XFREE (str);
-      }
-#endif
-  }
-}
-
-char *
-lt_extend_str (const char *orig_value, const char *add, int to_end)
-{
-  char *new_value;
-  if (orig_value && *orig_value)
-    {
-      int orig_value_len = strlen (orig_value);
-      int add_len = strlen (add);
-      new_value = XMALLOC (char, add_len + orig_value_len + 1);
-      if (to_end)
-        {
-          strcpy (new_value, orig_value);
-          strcpy (new_value + orig_value_len, add);
-        }
-      else
-        {
-          strcpy (new_value, add);
-          strcpy (new_value + add_len, orig_value);
-        }
-    }
-  else
-    {
-      new_value = xstrdup (add);
-    }
-  return new_value;
-}
-
-void
-lt_update_exe_path (const char *name, const char *value)
-{
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
-
-  if (name && *name && value && *value)
-    {
-      char *new_value = lt_extend_str (getenv (name), value, 0);
-      /* some systems can't cope with a ':'-terminated path #' */
-      int len = strlen (new_value);
-      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
-        {
-          new_value[len-1] = '\0';
-        }
-      lt_setenv (name, new_value);
-      XFREE (new_value);
-    }
-}
-
-void
-lt_update_lib_path (const char *name, const char *value)
-{
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
-
-  if (name && *name && value && *value)
-    {
-      char *new_value = lt_extend_str (getenv (name), value, 0);
-      lt_setenv (name, new_value);
-      XFREE (new_value);
-    }
-}
-
-EOF
-	    case $host_os in
-	      mingw*)
-		cat <<"EOF"
-
-/* Prepares an argument vector before calling spawn().
-   Note that spawn() does not by itself call the command interpreter
-     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
-      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
-         GetVersionEx(&v);
-         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
-      }) ? "cmd.exe" : "command.com").
-   Instead it simply concatenates the arguments, separated by ' ', and calls
-   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
-   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
-   special way:
-   - Space and tab are interpreted as delimiters. They are not treated as
-     delimiters if they are surrounded by double quotes: "...".
-   - Unescaped double quotes are removed from the input. Their only effect is
-     that within double quotes, space and tab are treated like normal
-     characters.
-   - Backslashes not followed by double quotes are not special.
-   - But 2*n+1 backslashes followed by a double quote become
-     n backslashes followed by a double quote (n >= 0):
-       \" -> "
-       \\\" -> \"
-       \\\\\" -> \\"
- */
-#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-char **
-prepare_spawn (char **argv)
-{
-  size_t argc;
-  char **new_argv;
-  size_t i;
-
-  /* Count number of arguments.  */
-  for (argc = 0; argv[argc] != NULL; argc++)
-    ;
-
-  /* Allocate new argument vector.  */
-  new_argv = XMALLOC (char *, argc + 1);
-
-  /* Put quoted arguments into the new argument vector.  */
-  for (i = 0; i < argc; i++)
-    {
-      const char *string = argv[i];
-
-      if (string[0] == '\0')
-	new_argv[i] = xstrdup ("\"\"");
-      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
-	{
-	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
-	  size_t length;
-	  unsigned int backslashes;
-	  const char *s;
-	  char *quoted_string;
-	  char *p;
-
-	  length = 0;
-	  backslashes = 0;
-	  if (quote_around)
-	    length++;
-	  for (s = string; *s != '\0'; s++)
-	    {
-	      char c = *s;
-	      if (c == '"')
-		length += backslashes + 1;
-	      length++;
-	      if (c == '\\')
-		backslashes++;
-	      else
-		backslashes = 0;
-	    }
-	  if (quote_around)
-	    length += backslashes + 1;
-
-	  quoted_string = XMALLOC (char, length + 1);
-
-	  p = quoted_string;
-	  backslashes = 0;
-	  if (quote_around)
-	    *p++ = '"';
-	  for (s = string; *s != '\0'; s++)
-	    {
-	      char c = *s;
-	      if (c == '"')
-		{
-		  unsigned int j;
-		  for (j = backslashes + 1; j > 0; j--)
-		    *p++ = '\\';
-		}
-	      *p++ = c;
-	      if (c == '\\')
-		backslashes++;
-	      else
-		backslashes = 0;
-	    }
-	  if (quote_around)
-	    {
-	      unsigned int j;
-	      for (j = backslashes; j > 0; j--)
-		*p++ = '\\';
-	      *p++ = '"';
-	    }
-	  *p = '\0';
-
-	  new_argv[i] = quoted_string;
-	}
-      else
-	new_argv[i] = (char *) string;
-    }
-  new_argv[argc] = NULL;
-
-  return new_argv;
-}
-EOF
-		;;
-	    esac
-
-            cat <<"EOF"
-void lt_dump_script (FILE* f)
-{
-EOF
-	    func_emit_wrapper yes |
-	      $SED -n -e '
-s/^\(.\{79\}\)\(..*\)/\1\
-\2/
-h
-s/\([\\"]\)/\\\1/g
-s/$/\\n/
-s/\([^\n]*\).*/  fputs ("\1", f);/p
-g
-D'
-            cat <<"EOF"
-}
-EOF
-}
-# end: func_emit_cwrapperexe_src
-
-# func_win32_import_lib_p ARG
-# True if ARG is an import lib, as indicated by $file_magic_cmd
-func_win32_import_lib_p ()
-{
-    $opt_debug
-    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
-    *import*) : ;;
-    *) false ;;
-    esac
-}
-
-# func_mode_link arg...
-func_mode_link ()
-{
-    $opt_debug
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invocation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args=$nonopt
-    base_compile="$nonopt $@"
-    compile_command=$nonopt
-    finalize_command=$nonopt
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-    inst_prefix_dir=
-    new_inherited_linker_flags=
-
-    avoid_version=no
-    bindir=
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    precious_files_regex=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-    vinfo_number=no
-    weak_libs=
-    single_module="${wl}-single_module"
-    func_infer_tag $base_compile
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
-	build_old_libs=no
-	break
-	;;
-      -all-static | -static | -static-libtool-libs)
-	case $arg in
-	-all-static)
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    func_warning "complete static linking is impossible in this configuration"
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	-static)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=built
-	  ;;
-	-static-libtool-libs)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	esac
-	build_libtool_libs=no
-	build_old_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      shift
-      func_quote_for_eval "$arg"
-      qarg=$func_quote_for_eval_unquoted_result
-      func_append libtool_args " $func_quote_for_eval_result"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  func_append compile_command " @OUTPUT@"
-	  func_append finalize_command " @OUTPUT@"
-	  ;;
-	esac
-
-	case $prev in
-	bindir)
-	  bindir="$arg"
-	  prev=
-	  continue
-	  ;;
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    func_append compile_command " @SYMFILE@"
-	    func_append finalize_command " @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      func_append dlfiles " $arg"
-	    else
-	      func_append dlprefiles " $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  test -f "$arg" \
-	    || func_fatal_error "symbol file \`$arg' does not exist"
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	framework)
-	  case $host in
-	    *-*-darwin*)
-	      case "$deplibs " in
-		*" $qarg.ltframework "*) ;;
-		*) func_append deplibs " $qarg.ltframework" # this is fixed later
-		   ;;
-	      esac
-	      ;;
-	  esac
-	  prev=
-	  continue
-	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat "$save_arg"`
-	    do
-#	      func_append moreargs " $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
-
-	      # Check to see that this really is a libtool object.
-	      if func_lalib_unsafe_p "$arg"; then
-		pic_object=
-		non_pic_object=
-
-		# Read the .lo file
-		func_source "$arg"
-
-		if test -z "$pic_object" ||
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none &&
-		   test "$non_pic_object" = none; then
-		  func_fatal_error "cannot find name of object for \`$arg'"
-		fi
-
-		# Extract subdirectory from the argument.
-		func_dirname "$arg" "/" ""
-		xdir="$func_dirname_result"
-
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
-
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      func_append dlfiles " $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
-
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    func_append dlprefiles " $pic_object"
-		    prev=
-		  fi
-
-		  # A PIC object.
-		  func_append libobjs " $pic_object"
-		  arg="$pic_object"
-		fi
-
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
-
-		  # A standard non-PIC object
-		  func_append non_pic_objects " $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		else
-		  # If the PIC object exists, use it instead.
-		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
-		  func_append non_pic_objects " $non_pic_object"
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if $opt_dry_run; then
-		  # Extract subdirectory from the argument.
-		  func_dirname "$arg" "/" ""
-		  xdir="$func_dirname_result"
-
-		  func_lo2o "$arg"
-		  pic_object=$xdir$objdir/$func_lo2o_result
-		  non_pic_object=$xdir$func_lo2o_result
-		  func_append libobjs " $pic_object"
-		  func_append non_pic_objects " $non_pic_object"
-	        else
-		  func_fatal_error "\`$arg' is not a valid libtool object"
-		fi
-	      fi
-	    done
-	  else
-	    func_fatal_error "link input file \`$arg' does not exist"
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    func_fatal_error "only absolute run-paths are allowed"
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) func_append rpath " $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) func_append xrpath " $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	shrext)
-	  shrext_cmds="$arg"
-	  prev=
-	  continue
-	  ;;
-	weak)
-	  func_append weak_libs " $arg"
-	  prev=
-	  continue
-	  ;;
-	xcclinker)
-	  func_append linker_flags " $qarg"
-	  func_append compiler_flags " $qarg"
-	  prev=
-	  func_append compile_command " $qarg"
-	  func_append finalize_command " $qarg"
-	  continue
-	  ;;
-	xcompiler)
-	  func_append compiler_flags " $qarg"
-	  prev=
-	  func_append compile_command " $qarg"
-	  func_append finalize_command " $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  func_append linker_flags " $qarg"
-	  func_append compiler_flags " $wl$qarg"
-	  prev=
-	  func_append compile_command " $wl$qarg"
-	  func_append finalize_command " $wl$qarg"
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  # See comment for -static flag below, for more details.
-	  func_append compile_command " $link_static_flag"
-	  func_append finalize_command " $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -bindir)
-	prev=bindir
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  func_fatal_error "more than one -exported-symbols argument is not allowed"
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      -framework)
-	prev=framework
-	continue
-	;;
-
-      -inst-prefix-dir)
-	prev=inst_prefix
-	continue
-	;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-	case $with_gcc/$host in
-	no/*-*-irix* | /*-*-irix*)
-	  func_append compile_command " $arg"
-	  func_append finalize_command " $arg"
-	  ;;
-	esac
-	continue
-	;;
-
-      -L*)
-	func_stripname "-L" '' "$arg"
-	if test -z "$func_stripname_result"; then
-	  if test "$#" -gt 0; then
-	    func_fatal_error "require no space between \`-L' and \`$1'"
-	  else
-	    func_fatal_error "need path for \`-L' option"
-	  fi
-	fi
-	func_resolve_sysroot "$func_stripname_result"
-	dir=$func_resolve_sysroot_result
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  test -z "$absdir" && \
-	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "* | *" $arg "*)
-	  # Will only happen for absolute or sysroot arguments
-	  ;;
-	*)
-	  # Preserve sysroot, but never include relative directories
-	  case $dir in
-	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
-	    *) func_append deplibs " -L$dir" ;;
-	  esac
-	  func_append lib_search_path " $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  ::) dllsearchpath=$dir;;
-	  *) func_append dllsearchpath ":$dir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  ::) dllsearchpath=$testbindir;;
-	  *) func_append dllsearchpath ":$testbindir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
-
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C and math libraries are in the System framework
-	    func_append deplibs " System.ltframework"
-	    continue
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  esac
-	elif test "X$arg" = "X-lc_r"; then
-	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	   # Do not include libc_r directly, use -pthread flag.
-	   continue
-	   ;;
-	 esac
-	fi
-	func_append deplibs " $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
-      # classes, name mangling, and exception handling.
-      # Darwin uses the -arch flag to determine output architecture.
-      -model|-arch|-isysroot|--sysroot)
-	func_append compiler_flags " $arg"
-	func_append compile_command " $arg"
-	func_append finalize_command " $arg"
-	prev=xcompiler
-	continue
-	;;
-
-      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
-      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
-	func_append compiler_flags " $arg"
-	func_append compile_command " $arg"
-	func_append finalize_command " $arg"
-	case "$new_inherited_linker_flags " in
-	    *" $arg "*) ;;
-	    * ) func_append new_inherited_linker_flags " $arg" ;;
-	esac
-	continue
-	;;
-
-      -multi_module)
-	single_module="${wl}-multi_module"
-	continue
-	;;
-
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
-
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # and Darwin in order for the loader to find any dlls it needs.
-	  func_warning "\`-no-install' is ignored for $host"
-	  func_warning "assuming \`-no-fast-install' instead"
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -objectlist)
-	prev=objectlist
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -precious-files-regex)
-	prev=precious_regex
-	continue
-	;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	func_stripname '-R' '' "$arg"
-	dir=$func_stripname_result
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	=*)
-	  func_stripname '=' '' "$dir"
-	  dir=$lt_sysroot$func_stripname_result
-	  ;;
-	*)
-	  func_fatal_error "only absolute run-paths are allowed"
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) func_append xrpath " $dir" ;;
-	esac
-	continue
-	;;
-
-      -shared)
-	# The effects of -shared are defined in a previous loop.
-	continue
-	;;
-
-      -shrext)
-	prev=shrext
-	continue
-	;;
-
-      -static | -static-libtool-libs)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-
-      -version-number)
-	prev=vinfo
-	vinfo_number=yes
-	continue
-	;;
-
-      -weak)
-        prev=weak
-	continue
-	;;
-
-      -Wc,*)
-	func_stripname '-Wc,' '' "$arg"
-	args=$func_stripname_result
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-          func_quote_for_eval "$flag"
-	  func_append arg " $func_quote_for_eval_result"
-	  func_append compiler_flags " $func_quote_for_eval_result"
-	done
-	IFS="$save_ifs"
-	func_stripname ' ' '' "$arg"
-	arg=$func_stripname_result
-	;;
-
-      -Wl,*)
-	func_stripname '-Wl,' '' "$arg"
-	args=$func_stripname_result
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-          func_quote_for_eval "$flag"
-	  func_append arg " $wl$func_quote_for_eval_result"
-	  func_append compiler_flags " $wl$func_quote_for_eval_result"
-	  func_append linker_flags " $func_quote_for_eval_result"
-	done
-	IFS="$save_ifs"
-	func_stripname ' ' '' "$arg"
-	arg=$func_stripname_result
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Xlinker)
-	prev=xlinker
-	continue
-	;;
-
-      -XCClinker)
-	prev=xcclinker
-	continue
-	;;
-
-      # -msg_* for osf cc
-      -msg_*)
-	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-	;;
-
-      # Flags to be passed through unchanged, with rationale:
-      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
-      # -r[0-9][0-9]*        specify processor for the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
-      # +DA*, +DD*           enable 64-bit mode for the HP compiler
-      # -q*                  compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
-      # -F/path              path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
-      # @file                GCC response files
-      # -tp=*                Portland pgcc target processor selection
-      # --sysroot=*          for sysroot support
-      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
-      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
-        func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-        func_append compile_command " $arg"
-        func_append finalize_command " $arg"
-        func_append compiler_flags " $arg"
-        continue
-        ;;
-
-      # Some other compiler flag.
-      -* | +*)
-        func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-	;;
-
-      *.$objext)
-	# A standard object.
-	func_append objs " $arg"
-	;;
-
-      *.lo)
-	# A libtool-controlled object.
-
-	# Check to see that this really is a libtool object.
-	if func_lalib_unsafe_p "$arg"; then
-	  pic_object=
-	  non_pic_object=
-
-	  # Read the .lo file
-	  func_source "$arg"
-
-	  if test -z "$pic_object" ||
-	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none &&
-	     test "$non_pic_object" = none; then
-	    func_fatal_error "cannot find name of object for \`$arg'"
-	  fi
-
-	  # Extract subdirectory from the argument.
-	  func_dirname "$arg" "/" ""
-	  xdir="$func_dirname_result"
-
-	  if test "$pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
-
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		func_append dlfiles " $pic_object"
-		prev=
-		continue
-	      else
-		# If libtool objects are unsupported, then we need to preload.
-		prev=dlprefiles
-	      fi
-	    fi
-
-	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
-	      # Preload the old-style object.
-	      func_append dlprefiles " $pic_object"
-	      prev=
-	    fi
-
-	    # A PIC object.
-	    func_append libobjs " $pic_object"
-	    arg="$pic_object"
-	  fi
-
-	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
-
-	    # A standard non-PIC object
-	    func_append non_pic_objects " $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
-	    fi
-	  else
-	    # If the PIC object exists, use it instead.
-	    # $xdir was prepended to $pic_object above.
-	    non_pic_object="$pic_object"
-	    func_append non_pic_objects " $non_pic_object"
-	  fi
-	else
-	  # Only an error if not doing a dry-run.
-	  if $opt_dry_run; then
-	    # Extract subdirectory from the argument.
-	    func_dirname "$arg" "/" ""
-	    xdir="$func_dirname_result"
-
-	    func_lo2o "$arg"
-	    pic_object=$xdir$objdir/$func_lo2o_result
-	    non_pic_object=$xdir$func_lo2o_result
-	    func_append libobjs " $pic_object"
-	    func_append non_pic_objects " $non_pic_object"
-	  else
-	    func_fatal_error "\`$arg' is not a valid libtool object"
-	  fi
-	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	func_append deplibs " $arg"
-	func_append old_deplibs " $arg"
-	continue
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	func_resolve_sysroot "$arg"
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  func_append dlfiles " $func_resolve_sysroot_result"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  func_append dlprefiles " $func_resolve_sysroot_result"
-	  prev=
-	else
-	  func_append deplibs " $func_resolve_sysroot_result"
-	fi
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-	;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	func_append compile_command " $arg"
-	func_append finalize_command " $arg"
-      fi
-    done # argument parsing loop
-
-    test -n "$prev" && \
-      func_fatal_help "the \`$prevarg' option requires an argument"
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      func_append compile_command " $arg"
-      func_append finalize_command " $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    func_basename "$output"
-    outputname="$func_basename_result"
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    func_dirname "$output" "/" ""
-    output_objdir="$func_dirname_result$objdir"
-    func_to_tool_file "$output_objdir/"
-    tool_output_objdir=$func_to_tool_file_result
-    # Create the object directory.
-    func_mkdir_p "$output_objdir"
-
-    # Determine the type of output
-    case $output in
-    "")
-      func_fatal_help "you must specify an output file"
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    specialdeplibs=
-
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if $opt_preserve_dup_deps ; then
-	case "$libs " in
-	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
-	esac
-      fi
-      func_append libs " $deplib"
-    done
-
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if $opt_duplicate_compiler_generated_deps; then
-	for pre_post_dep in $predeps $postdeps; do
-	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
-	  esac
-	  func_append pre_post_deps " $pre_post_dep"
-	done
-      fi
-      pre_post_deps=
-    fi
-
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
-
-    case $linkmode in
-    lib)
-	passes="conv dlpreopen link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
-	    ;;
-	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-
-    for pass in $passes; do
-      # The preopen pass in lib mode reverses $deplibs; put it back here
-      # so that -L comes before libs that need it for instance...
-      if test "$linkmode,$pass" = "lib,link"; then
-	## FIXME: Find the place where the list is rebuilt in the wrong
-	##        order, and fix it there properly
-        tmp_deplibs=
-	for deplib in $deplibs; do
-	  tmp_deplibs="$deplib $tmp_deplibs"
-	done
-	deplibs="$tmp_deplibs"
-      fi
-
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
-      if test "$linkmode" = prog; then
-	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
-	esac
-      fi
-      if test "$linkmode,$pass" = "lib,dlpreopen"; then
-	# Collect and forward deplibs of preopened libtool libs
-	for lib in $dlprefiles; do
-	  # Ignore non-libtool-libs
-	  dependency_libs=
-	  func_resolve_sysroot "$lib"
-	  case $lib in
-	  *.la)	func_source "$func_resolve_sysroot_result" ;;
-	  esac
-
-	  # Collect preopened libtool deplibs, except any this library
-	  # has declared as weak libs
-	  for deplib in $dependency_libs; do
-	    func_basename "$deplib"
-            deplib_base=$func_basename_result
-	    case " $weak_libs " in
-	    *" $deplib_base "*) ;;
-	    *) func_append deplibs " $deplib" ;;
-	    esac
-	  done
-	done
-	libs="$dlprefiles"
-      fi
-      if test "$pass" = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
-
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
-        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    func_append compiler_flags " $deplib"
-	    if test "$linkmode" = lib ; then
-		case "$new_inherited_linker_flags " in
-		    *" $deplib "*) ;;
-		    * ) func_append new_inherited_linker_flags " $deplib" ;;
-		esac
-	    fi
-	  fi
-	  continue
-	  ;;
-	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    func_warning "\`-l' is ignored for archives/objects"
-	    continue
-	  fi
-	  func_stripname '-l' '' "$deplib"
-	  name=$func_stripname_result
-	  if test "$linkmode" = lib; then
-	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
-	  else
-	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
-	  fi
-	  for searchdir in $searchdirs; do
-	    for search_ext in .la $std_shrext .so .a; do
-	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
-	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
-		else
-		  found=no
-		fi
-		break 2
-	      fi
-	    done
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
-	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	      case " $predeps $postdeps " in
-	      *" $deplib "*)
-		if func_lalib_p "$lib"; then
-		  library_names=
-		  old_library=
-		  func_source "$lib"
-		  for l in $old_library $library_names; do
-		    ll="$l"
-		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
-		    func_dirname "$lib" "" "."
-		    ladir="$func_dirname_result"
-		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
-		      compile_deplibs="$deplib $compile_deplibs"
-		      finalize_deplibs="$deplib $finalize_deplibs"
-		    else
-		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-		    fi
-		    continue
-		  fi
-		fi
-		;;
-	      *) ;;
-	      esac
-	    fi
-	  fi
-	  ;; # -l
-	*.ltframework)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    deplibs="$deplib $deplibs"
-	    if test "$linkmode" = lib ; then
-		case "$new_inherited_linker_flags " in
-		    *" $deplib "*) ;;
-		    * ) func_append new_inherited_linker_flags " $deplib" ;;
-		esac
-	    fi
-	  fi
-	  continue
-	  ;;
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    func_stripname '-L' '' "$deplib"
-	    func_resolve_sysroot "$func_stripname_result"
-	    func_append newlib_search_path " $func_resolve_sysroot_result"
-	    ;;
-	  prog)
-	    if test "$pass" = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test "$pass" = scan; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    func_stripname '-L' '' "$deplib"
-	    func_resolve_sysroot "$func_stripname_result"
-	    func_append newlib_search_path " $func_resolve_sysroot_result"
-	    ;;
-	  *)
-	    func_warning "\`-L' is ignored for archives/objects"
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test "$pass" = link; then
-	    func_stripname '-R' '' "$deplib"
-	    func_resolve_sysroot "$func_stripname_result"
-	    dir=$func_resolve_sysroot_result
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) func_append xrpath " $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la)
-	  func_resolve_sysroot "$deplib"
-	  lib=$func_resolve_sysroot_result
-	  ;;
-	*.$libext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    # Linking convenience modules into shared libraries is allowed,
-	    # but linking other static libraries is non-portable.
-	    case " $dlpreconveniencelibs " in
-	    *" $deplib "*) ;;
-	    *)
-	      valid_a_lib=no
-	      case $deplibs_check_method in
-		match_pattern*)
-		  set dummy $deplibs_check_method; shift
-		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
-		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		    valid_a_lib=yes
-		  fi
-		;;
-		pass_all)
-		  valid_a_lib=yes
-		;;
-	      esac
-	      if test "$valid_a_lib" != yes; then
-		echo
-		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because the file extensions .$libext of this argument makes me believe"
-		echo "*** that it is just a static archive that I should not use here."
-	      else
-		echo
-		$ECHO "*** Warning: Linking the shared library $output against the"
-		$ECHO "*** static library $deplib is not portable!"
-		deplibs="$deplib $deplibs"
-	      fi
-	      ;;
-	    esac
-	    continue
-	    ;;
-	  prog)
-	    if test "$pass" != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      func_append newdlprefiles " $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      func_append newdlfiles " $deplib"
-	    fi
-	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-	fi
-
-	# Check to see that this really is a libtool archive.
-	func_lalib_unsafe_p "$lib" \
-	  || func_fatal_error "\`$lib' is not a valid libtool archive"
-
-	func_dirname "$lib" "" "."
-	ladir="$func_dirname_result"
-
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	inherited_linker_flags=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variables installed, or shouldnotlink
-	installed=yes
-	shouldnotlink=no
-	avoidtemprpath=
-
-
-	# Read the .la file
-	func_source "$lib"
-
-	# Convert "-framework foo" to "foo.ltframework"
-	if test -n "$inherited_linker_flags"; then
-	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
-	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
-	    case " $new_inherited_linker_flags " in
-	      *" $tmp_inherited_linker_flag "*) ;;
-	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
-	    esac
-	  done
-	fi
-	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && func_append dlfiles " $dlopen"
-	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
-	fi
-
-	if test "$pass" = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      func_fatal_error "cannot find name of link library for \`$lib'"
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    func_append convenience " $ladir/$objdir/$old_library"
-	    func_append old_convenience " $ladir/$objdir/$old_library"
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    func_fatal_error "\`$lib' is not a convenience library"
-	  fi
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    deplibs="$deplib $deplibs"
-	    if $opt_preserve_dup_deps ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
-	      esac
-	    fi
-	    func_append tmp_libs " $deplib"
-	  done
-	  continue
-	fi # $pass = conv
-
-
-	# Get the name of the library we link against.
-	linklib=
-	if test -n "$old_library" &&
-	   { test "$prefer_static_libs" = yes ||
-	     test "$prefer_static_libs,$installed" = "built,no"; }; then
-	  linklib=$old_library
-	else
-	  for l in $old_library $library_names; do
-	    linklib="$l"
-	  done
-	fi
-	if test -z "$linklib"; then
-	  func_fatal_error "cannot find name of link library for \`$lib'"
-	fi
-
-	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-	  fi
-	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.  We also need to preload any
-	    # dependent libraries so libltdl's deplib preloader doesn't
-	    # bomb out in the load deplibs phase.
-	    func_append dlprefiles " $lib $dependency_libs"
-	  else
-	    func_append newdlfiles " $lib"
-	  fi
-	  continue
-	fi # $pass = dlopen
-
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    func_warning "cannot determine absolute directory name of \`$ladir'"
-	    func_warning "passing it literally to the linker, although it might fail"
-	    abs_ladir="$ladir"
-	  fi
-	  ;;
-	esac
-	func_basename "$lib"
-	laname="$func_basename_result"
-
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    func_warning "library \`$lib' was moved."
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$lt_sysroot$libdir"
-	    absdir="$lt_sysroot$libdir"
-	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
-	else
-	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    # Remove this search path later
-	    func_append notinst_path " $abs_ladir"
-	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
-	    # Remove this search path later
-	    func_append notinst_path " $abs_ladir"
-	  fi
-	fi # $installed = yes
-	func_stripname 'lib' '.la' "$laname"
-	name=$func_stripname_result
-
-	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir" && test "$linkmode" = prog; then
-	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
-	  fi
-	  case "$host" in
-	    # special handling for platforms with PE-DLLs.
-	    *cygwin* | *mingw* | *cegcc* )
-	      # Linker will automatically link against shared library if both
-	      # static and shared are present.  Therefore, ensure we extract
-	      # symbols from the import library if a shared library is present
-	      # (otherwise, the dlopen module name will be incorrect).  We do
-	      # this by putting the import library name into $newdlprefiles.
-	      # We recover the dlopen module name by 'saving' the la file
-	      # name in a special purpose variable, and (later) extracting the
-	      # dlname from the la file.
-	      if test -n "$dlname"; then
-	        func_tr_sh "$dir/$linklib"
-	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
-	        func_append newdlprefiles " $dir/$linklib"
-	      else
-	        func_append newdlprefiles " $dir/$old_library"
-	        # Keep a list of preopened convenience libraries to check
-	        # that they are being used correctly in the link pass.
-	        test -z "$libdir" && \
-	          func_append dlpreconveniencelibs " $dir/$old_library"
-	      fi
-	    ;;
-	    * )
-	      # Prefer using a static library (so that no silly _DYNAMIC symbols
-	      # are required to link).
-	      if test -n "$old_library"; then
-	        func_append newdlprefiles " $dir/$old_library"
-	        # Keep a list of preopened convenience libraries to check
-	        # that they are being used correctly in the link pass.
-	        test -z "$libdir" && \
-	          func_append dlpreconveniencelibs " $dir/$old_library"
-	      # Otherwise, use the dlname, so that lt_dlopen finds it.
-	      elif test -n "$dlname"; then
-	        func_append newdlprefiles " $dir/$dlname"
-	      else
-	        func_append newdlprefiles " $dir/$linklib"
-	      fi
-	    ;;
-	  esac
-	fi # $pass = dlpreopen
-
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test "$linkmode" = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
-	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
-	  fi
-	  continue
-	fi
-
-
-	if test "$linkmode" = prog && test "$pass" != link; then
-	  func_append newlib_search_path " $ladir"
-	  deplibs="$lib $deplibs"
-
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
-	  fi
-
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) func_stripname '-L' '' "$deplib"
-	         func_resolve_sysroot "$func_stripname_result"
-	         func_append newlib_search_path " $func_resolve_sysroot_result"
-		 ;;
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if $opt_preserve_dup_deps ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
-	      esac
-	    fi
-	    func_append tmp_libs " $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
-
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { { test "$prefer_static_libs" = no ||
-	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
-	       test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath:" in
-	      *"$absdir:"*) ;;
-	      *) func_append temp_rpath "$absdir:" ;;
-	      esac
-	    fi
-
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) func_append compile_rpath " $absdir" ;;
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) func_append finalize_rpath " $libdir" ;;
-	      esac
-	      ;;
-	    esac
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
-
-	link_static=no # Whether the deplib will be linked statically
-	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes; then
-	  use_static_libs=no
-	fi
-	if test -n "$library_names" &&
-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  case $host in
-	  *cygwin* | *mingw* | *cegcc*)
-	      # No point in relinking DLLs because paths are not encoded
-	      func_append notinst_deplibs " $lib"
-	      need_relink=no
-	    ;;
-	  *)
-	    if test "$installed" = no; then
-	      func_append notinst_deplibs " $lib"
-	      need_relink=yes
-	    fi
-	    ;;
-	  esac
-	  # This is a shared library
-
-	  # Warn about portability, can't link against -module's on some
-	  # systems (darwin).  Don't bleat about dlopened modules though!
-	  dlopenmodule=""
-	  for dlpremoduletest in $dlprefiles; do
-	    if test "X$dlpremoduletest" = "X$lib"; then
-	      dlopenmodule="$dlpremoduletest"
-	      break
-	    fi
-	  done
-	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-	    echo
-	    if test "$linkmode" = prog; then
-	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
-	    else
-	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
-	    fi
-	    $ECHO "*** $linklib is not portable!"
-	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) func_append compile_rpath " $absdir" ;;
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) func_append finalize_rpath " $libdir" ;;
-	      esac
-	      ;;
-	    esac
-	  fi
-
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    shift
-	    realname="$1"
-	    shift
-	    libname=`eval "\\$ECHO \"$libname_spec\""`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin* | mingw* | *cegcc*)
-	        func_arith $current - $age
-		major=$func_arith_result
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
-
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    func_basename "$soroot"
-	    soname="$func_basename_result"
-	    func_stripname 'lib' '.dll' "$soname"
-	    newlib=libimp-$func_stripname_result.a
-
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      func_verbose "extracting exported symbol list from \`$soname'"
-	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
-	    fi
-
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      func_verbose "generating import library for \`$soname'"
-	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
-	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n "$old_archive_from_expsyms_cmds"
-
-	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-		case $host in
-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
-		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-		    *-*-unixware7*) add_dir="-L$dir" ;;
-		  *-*-darwin* )
-		    # if the lib is a (non-dlopened) module then we can not
-		    # link against it, someone is ignoring the earlier warnings
-		    if /usr/bin/file -L $add 2> /dev/null |
-			 $GREP ": [^:]* bundle" >/dev/null ; then
-		      if test "X$dlopenmodule" != "X$lib"; then
-			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
-			if test -z "$old_library" ; then
-			  echo
-			  echo "*** And there doesn't seem to be a static archive available"
-			  echo "*** The link will probably fail, sorry"
-			else
-			  add="$dir/$old_library"
-			fi
-		      elif test -n "$old_library"; then
-			add="$dir/$old_library"
-		      fi
-		    fi
-		esac
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes &&
-	         test "$hardcode_direct_absolute" = no; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$absdir"
-		# Try looking first in the location we're being installed to.
-		if test -n "$inst_prefix_dir"; then
-		  case $libdir in
-		    [\\/]*)
-		      func_append add_dir " -L$inst_prefix_dir$libdir"
-		      ;;
-		  esac
-		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
-
-	    if test "$lib_linked" != yes; then
-	      func_fatal_configuration "unsupported hardcode properties"
-	    fi
-
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes &&
-		 test "$hardcode_minus_L" != yes &&
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) func_append finalize_shlibpath "$libdir:" ;;
-		esac
-	      fi
-	    fi
-	  fi
-
-	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes &&
-	       test "$hardcode_direct_absolute" = no; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) func_append finalize_shlibpath "$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
-	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-		add="$inst_prefix_dir$libdir/$linklib"
-	      else
-		add="$libdir/$linklib"
-	      fi
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      # Try looking first in the location we're being installed to.
-	      if test -n "$inst_prefix_dir"; then
-		case $libdir in
-		  [\\/]*)
-		    func_append add_dir " -L$inst_prefix_dir$libdir"
-		    ;;
-		esac
-	      fi
-	      add="-l$name"
-	    fi
-
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test "$linkmode" = prog; then
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
-
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    echo
-	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
-	    echo "*** I have the capability to make that library automatically link in when"
-	    echo "*** you link to this library.  But I can only do this if you have a"
-	    echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      echo "*** But as you try to build a module library, libtool will still create "
-	      echo "*** a static module, that should work as long as the dlopening application"
-	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		echo
-		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  else
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
-
-	if test "$linkmode" = lib; then
-	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) func_stripname '-R' '' "$libdir"
-	           temp_xrpath=$func_stripname_result
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) func_append xrpath " $temp_xrpath";;
-		   esac;;
-	      *) func_append temp_deplibs " $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  fi
-
-	  func_append newlib_search_path " $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    case $deplib in
-              -L*) func_stripname '-L' '' "$deplib"
-                   func_resolve_sysroot "$func_stripname_result";;
-              *) func_resolve_sysroot "$deplib" ;;
-            esac
-	    if $opt_preserve_dup_deps ; then
-	      case "$tmp_libs " in
-	      *" $func_resolve_sysroot_result "*)
-                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
-	      esac
-	    fi
-	    func_append tmp_libs " $func_resolve_sysroot_result"
-	  done
-
-	  if test "$link_all_deplibs" != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      path=
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-	        func_resolve_sysroot "$deplib"
-	        deplib=$func_resolve_sysroot_result
-	        func_dirname "$deplib" "" "."
-		dir=$func_dirname_result
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    func_warning "cannot determine absolute directory name of \`$dir'"
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if $GREP "^installed=no" $deplib > /dev/null; then
-		case $host in
-		*-*-darwin*)
-		  depdepl=
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
-		      depdepl=$tmp
-		    done
-		    if test -f "$absdir/$objdir/$depdepl" ; then
-		      depdepl="$absdir/$objdir/$depdepl"
-		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
-                      if test -z "$darwin_install_name"; then
-                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
-                      fi
-		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
-		      path=
-		    fi
-		  fi
-		  ;;
-		*)
-		  path="-L$absdir/$objdir"
-		  ;;
-		esac
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  test -z "$libdir" && \
-		    func_fatal_error "\`$deplib' is not a valid libtool archive"
-		  test "$absdir" != "$libdir" && \
-		    func_warning "\`$deplib' seems to be moved"
-
-		  path="-L$absdir"
-		fi
-		;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$path $deplibs" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      if test "$pass" = link; then
-	if test "$linkmode" = "prog"; then
-	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
-	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
-	else
-	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	fi
-      fi
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) func_append lib_search_path " $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
-	fi
-
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    # FIXME: Pedantically, this is the right thing to do, so
-	    #        that some nasty dependency loop isn't accidentally
-	    #        broken:
-	    #new_libs="$deplib $new_libs"
-	    # Pragmatically, this seems to cause very few problems in
-	    # practice:
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    -R*) ;;
-	    *)
-	      # And here is the reason: when a library appears more
-	      # than once as an explicit dependence of a library, or
-	      # is implicitly linked in more than once by the
-	      # compiler, it is considered special, and multiple
-	      # occurrences thereof are not removed.  Compare this
-	      # with having the same library being listed as a
-	      # dependency of multiple other libraries: in this case,
-	      # we know (pedantically, we assume) the library does not
-	      # need to be listed more than once, so we keep only the
-	      # last copy.  This is not always right, but it is rare
-	      # enough that we require users that really mean to play
-	      # such unportable linking tricks to link the library
-	      # using -Wl,-lname, so that libtool does not consider it
-	      # for duplicate removal.
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) func_append tmp_libs " $deplib" ;;
-	      esac
-	      ;;
-	    *) func_append tmp_libs " $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-      # Last step: remove runtime libs from dependency_libs
-      # (they stay in deplibs)
-      tmp_libs=
-      for i in $dependency_libs ; do
-	case " $predeps $postdeps $compiler_lib_search_path " in
-	*" $i "*)
-	  i=""
-	  ;;
-	esac
-	if test -n "$i" ; then
-	  func_append tmp_libs " $i"
-	fi
-      done
-      dependency_libs=$tmp_libs
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-    fi
-    if test "$linkmode" = prog || test "$linkmode" = lib; then
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for archives"
-      fi
-
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for archives" ;;
-      esac
-
-      test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for archives"
-
-      test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for archives"
-
-      test -n "$vinfo" && \
-	func_warning "\`-version-info/-version-number' is ignored for archives"
-
-      test -n "$release" && \
-	func_warning "\`-release' is ignored for archives"
-
-      test -n "$export_symbols$export_symbols_regex" && \
-	func_warning "\`-export-symbols' is ignored for archives"
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      func_append objs "$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	func_stripname 'lib' '.la' "$outputname"
-	name=$func_stripname_result
-	eval shared_ext=\"$shrext_cmds\"
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	test "$module" = no && \
-	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
-
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  func_stripname '' '.la' "$outputname"
-	  name=$func_stripname_result
-	  eval shared_ext=\"$shrext_cmds\"
-	  eval libname=\"$libname_spec\"
-	else
-	  func_stripname '' '.la' "$outputname"
-	  libname=$func_stripname_result
-	fi
-	;;
-      esac
-
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
-	else
-	  echo
-	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
-	  $ECHO "*** objects $objs is not portable!"
-	  func_append libobjs " $objs"
-	fi
-      fi
-
-      test "$dlself" != no && \
-	func_warning "\`-dlopen self' is ignored for libtool libraries"
-
-      set dummy $rpath
-      shift
-      test "$#" -gt 1 && \
-	func_warning "ignoring multiple \`-rpath's for a libtool library"
-
-      install_libdir="$1"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
-	  # convenience libraries should have the same extension an
-	  # archive normally would.
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-
-	test -n "$vinfo" && \
-	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
-
-	test -n "$release" && \
-	  func_warning "\`-release' is ignored for convenience libraries"
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	shift
-	IFS="$save_ifs"
-
-	test -n "$7" && \
-	  func_fatal_help "too many parameters to \`-version-info'"
-
-	# convert absolute version numbers to libtool ages
-	# this retains compatibility with .la files and attempts
-	# to make the code below a bit more comprehensible
-
-	case $vinfo_number in
-	yes)
-	  number_major="$1"
-	  number_minor="$2"
-	  number_revision="$3"
-	  #
-	  # There are really only two kinds -- those that
-	  # use the current revision as the major version
-	  # and those that subtract age and use age as
-	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
-	  #
-	  case $version_type in
-	  # correct linux to gnu/linux during the next big refactor
-	  darwin|linux|osf|windows|none)
-	    func_arith $number_major + $number_minor
-	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_revision"
-	    ;;
-	  freebsd-aout|freebsd-elf|qnx|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
-	    ;;
-	  irix|nonstopux)
-	    func_arith $number_major + $number_minor
-	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_minor"
-	    lt_irix_increment=no
-	    ;;
-	  esac
-	  ;;
-	no)
-	  current="$1"
-	  revision="$2"
-	  age="$3"
-	  ;;
-	esac
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  func_error "CURRENT \`$current' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	  ;;
-	esac
-
-	case $revision in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  func_error "REVISION \`$revision' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	  ;;
-	esac
-
-	case $age in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  func_error "AGE \`$age' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	  ;;
-	esac
-
-	if test "$age" -gt "$current"; then
-	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
-
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  func_arith $current + 1
-	  minor_current=$func_arith_result
-	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current"
-	  ;;
-
-	irix | nonstopux)
-	  if test "X$lt_irix_increment" = "Xno"; then
-	    func_arith $current - $age
-	  else
-	    func_arith $current - $age + 1
-	  fi
-	  major=$func_arith_result
-
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test "$loop" -ne 0; do
-	    func_arith $revision - $loop
-	    iface=$func_arith_result
-	    func_arith $loop - 1
-	    loop=$func_arith_result
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
-
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
-
-	linux) # correct to gnu/linux during the next big refactor
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test "$loop" -ne 0; do
-	    func_arith $current - $loop
-	    iface=$func_arith_result
-	    func_arith $loop - 1
-	    loop=$func_arith_result
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  func_append verstring ":${current}.0"
-	  ;;
-
-	qnx)
-	  major=".$current"
-	  versuffix=".$current"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  func_arith $current - $age
-	  major=$func_arith_result
-	  versuffix="-$major"
-	  ;;
-
-	*)
-	  func_fatal_configuration "unknown library version type \`$version_type'"
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    func_warning "undefined symbols not allowed in $host shared libraries"
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-
-      fi
-
-      func_generate_dlsyms "$libname" "$libname" "yes"
-      func_append libobjs " $symfileobj"
-      test "X$libobjs" = "X " && libobjs=
-
-      if test "$opt_mode" != relink; then
-	# Remove our outputs, but don't remove object files since they
-	# may have been created when compiling PIC objects.
-	removelist=
-	tempremovelist=`$ECHO "$output_objdir/*"`
-	for p in $tempremovelist; do
-	  case $p in
-	    *.$objext | *.gcno)
-	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
-		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-		 then
-		   continue
-		 fi
-	       fi
-	       func_append removelist " $p"
-	       ;;
-	    *) ;;
-	  esac
-	done
-	test -n "$removelist" && \
-	  func_show_eval "${RM}r \$removelist"
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	func_append oldlibs " $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      #for path in $notinst_path; do
-      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
-      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
-      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
-      #done
-
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  func_replace_sysroot "$libdir"
-	  func_append temp_xrpath " -R$func_replace_sysroot_result"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) func_append finalize_rpath " $libdir" ;;
-	  esac
-	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) func_append dlfiles " $lib" ;;
-	esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) func_append dlprefiles " $lib" ;;
-	esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    func_append deplibs " System.ltframework"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    ;;
-	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
-	      func_append deplibs " -lc"
-	    fi
-	    ;;
-	  esac
-	fi
-
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behavior.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $opt_dry_run || $RM conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $opt_dry_run || $RM conftest
-	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      case $i in
-	      -l*)
-		func_stripname -l '' "$i"
-		name=$func_stripname_result
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		  case " $predeps $postdeps " in
-		  *" $i "*)
-		    func_append newdeplibs " $i"
-		    i=""
-		    ;;
-		  esac
-		fi
-		if test -n "$i" ; then
-		  libname=`eval "\\$ECHO \"$libname_spec\""`
-		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-		  set dummy $deplib_matches; shift
-		  deplib_match=$1
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    func_append newdeplibs " $i"
-		  else
-		    droppeddeps=yes
-		    echo
-		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which I believe you do not have"
-		    echo "*** because a test_compile did reveal that the linker did not use it for"
-		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
-		  fi
-		fi
-		;;
-	      *)
-		func_append newdeplibs " $i"
-		;;
-	      esac
-	    done
-	  else
-	    # Error occurred in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      case $i in
-	      -l*)
-		func_stripname -l '' "$i"
-		name=$func_stripname_result
-		$opt_dry_run || $RM conftest
-		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
-		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		    case " $predeps $postdeps " in
-		    *" $i "*)
-		      func_append newdeplibs " $i"
-		      i=""
-		      ;;
-		    esac
-		  fi
-		  if test -n "$i" ; then
-		    libname=`eval "\\$ECHO \"$libname_spec\""`
-		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-		    set dummy $deplib_matches; shift
-		    deplib_match=$1
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      func_append newdeplibs " $i"
-		    else
-		      droppeddeps=yes
-		      echo
-		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		      echo "*** I have the capability to make that library automatically link in when"
-		      echo "*** you link to this library.  But I can only do this if you have a"
-		      echo "*** shared version of the library, which you do not appear to have"
-		      echo "*** because a test_compile did reveal that the linker did not use this one"
-		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-		    fi
-		  fi
-		else
-		  droppeddeps=yes
-		  echo
-		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "*** make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
-		fi
-		;;
-	      *)
-		func_append newdeplibs " $i"
-		;;
-	      esac
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method; shift
-	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    case $a_deplib in
-	    -l*)
-	      func_stripname -l '' "$a_deplib"
-	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval "\\$ECHO \"$libname_spec\""`
-		if test -n "$file_magic_glob"; then
-		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
-		else
-		  libnameglob=$libname
-		fi
-		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  if test "$want_nocaseglob" = yes; then
-		    shopt -s nocaseglob
-		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
-		    $nocaseglob
-		  else
-		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
-		  fi
-		  for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null |
-			 $GREP " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
-			 $SED -e 10q |
-			 $EGREP "$file_magic_regex" > /dev/null; then
-			func_append newdeplibs " $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  $ECHO "*** with $libname and none of the candidates passed a file format test"
-		  $ECHO "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
-	      ;;
-	    *)
-	      # Add a -L argument.
-	      func_append newdeplibs " $a_deplib"
-	      ;;
-	    esac
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method; shift
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    case $a_deplib in
-	    -l*)
-	      func_stripname -l '' "$a_deplib"
-	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval "\\$ECHO \"$libname_spec\""`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
-		       $EGREP "$match_pattern_regex" > /dev/null; then
-		      func_append newdeplibs " $a_deplib"
-		      a_deplib=""
-		      break 2
-		    fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  $ECHO "*** with $libname and none of the candidates passed a file format test"
-		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	      ;;
-	    *)
-	      # Add a -L argument.
-	      func_append newdeplibs " $a_deplib"
-	      ;;
-	    esac
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
-	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
-	    done
-	  fi
-	  case $tmp_deplibs in
-	  *[!\	\ ]*)
-	    echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	    ;;
-	  esac
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library with the System framework
-	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
-	  ;;
-	esac
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
-
-	    if test "$allow_undefined" = no; then
-	      echo
-	      echo "*** Since this library must not contain undefined symbols,"
-	      echo "*** because either the platform does not support them or"
-	      echo "*** it was explicitly requested with -no-undefined,"
-	      echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
-      case $host in
-	*-*-darwin*)
-	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  ;;
-      esac
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $deplibs " in
-	  *" -L$path/$objdir "*)
-	    func_append new_libs " -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) func_append new_libs " $deplib" ;;
-	  esac
-	  ;;
-	*) func_append new_libs " $deplib" ;;
-	esac
-      done
-      deplibs="$new_libs"
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	# Remove ${wl} instances when linking with ld.
-	# FIXME: should test the right _cmds variable.
-	case $archive_cmds in
-	  *\$LD\ *) wl= ;;
-        esac
-	if test "$hardcode_into_libs" = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		func_replace_sysroot "$libdir"
-		libdir=$func_replace_sysroot_result
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		func_append dep_rpath " $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) func_append perm_rpath " $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      func_append rpath "$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
-
-	shlibpath="$finalize_shlibpath"
-	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
-
-	# Get the real and link names of the library.
-	eval shared_ext=\"$shrext_cmds\"
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	shift
-	realname="$1"
-	shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	if test -z "$dlname"; then
-	  dlname=$soname
-	fi
-
-	lib="$output_objdir/$realname"
-	linknames=
-	for link
-	do
-	  func_append linknames " $link"
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
-	test "X$libobjs" = "X " && libobjs=
-
-	delfiles=
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
-	  export_symbols="$output_objdir/$libname.uexp"
-	  func_append delfiles " $export_symbols"
-	fi
-
-	orig_export_symbols=
-	case $host_os in
-	cygwin* | mingw* | cegcc*)
-	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
-	    # exporting using user supplied symfile
-	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
-	      # and it's NOT already a .def file. Must figure out
-	      # which of the given symbols are data symbols and tag
-	      # them as such. So, trigger use of export_symbols_cmds.
-	      # export_symbols gets reassigned inside the "prepare
-	      # the list of exported symbols" if statement, so the
-	      # include_expsyms logic still works.
-	      orig_export_symbols="$export_symbols"
-	      export_symbols=
-	      always_export_symbols=yes
-	    fi
-	  fi
-	  ;;
-	esac
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    func_verbose "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $opt_dry_run || $RM $export_symbols
-	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd1 in $cmds; do
-	      IFS="$save_ifs"
-	      # Take the normal branch if the nm_file_list_spec branch
-	      # doesn't work or if tool conversion is not needed.
-	      case $nm_file_list_spec~$to_tool_file_cmd in
-		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
-		  try_normal_branch=yes
-		  eval cmd=\"$cmd1\"
-		  func_len " $cmd"
-		  len=$func_len_result
-		  ;;
-		*)
-		  try_normal_branch=no
-		  ;;
-	      esac
-	      if test "$try_normal_branch" = yes \
-		 && { test "$len" -lt "$max_cmd_len" \
-		      || test "$max_cmd_len" -le -1; }
-	      then
-		func_show_eval "$cmd" 'exit $?'
-		skipped_export=false
-	      elif test -n "$nm_file_list_spec"; then
-		func_basename "$output"
-		output_la=$func_basename_result
-		save_libobjs=$libobjs
-		save_output=$output
-		output=${output_objdir}/${output_la}.nm
-		func_to_tool_file "$output"
-		libobjs=$nm_file_list_spec$func_to_tool_file_result
-		func_append delfiles " $output"
-		func_verbose "creating $NM input file list: $output"
-		for obj in $save_libobjs; do
-		  func_to_tool_file "$obj"
-		  $ECHO "$func_to_tool_file_result"
-		done > "$output"
-		eval cmd=\"$cmd1\"
-		func_show_eval "$cmd" 'exit $?'
-		output=$save_output
-		libobjs=$save_libobjs
-		skipped_export=false
-	      else
-		# The command line is too long to execute in one step.
-		func_verbose "using reloadable object file for export list..."
-		skipped_export=:
-		# Break out early, otherwise skipped_export may be
-		# set to false by a later but shorter cmd.
-		break
-	      fi
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
-	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  tmp_export_symbols="$export_symbols"
-	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
-	fi
-
-	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
-	  # The given exports_symbols file has to be filtered, so filter it.
-	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	  # 's' commands which not all seds can handle. GNU sed should be fine
-	  # though. Also, the filter scales superlinearly with the number of
-	  # global variables. join(1) would be nice here, but unfortunately
-	  # isn't a blessed tool.
-	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
-	  export_symbols=$output_objdir/$libname.def
-	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-	fi
-
-	tmp_deplibs=
-	for test_deplib in $deplibs; do
-	  case " $convenience " in
-	  *" $test_deplib "*) ;;
-	  *)
-	    func_append tmp_deplibs " $test_deplib"
-	    ;;
-	  esac
-	done
-	deplibs="$tmp_deplibs"
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec" &&
-	    test "$compiler_needs_object" = yes &&
-	    test -z "$libobjs"; then
-	    # extract the archives, so we have objects to list.
-	    # TODO: could optimize this to just extract one archive.
-	    whole_archive_flag_spec=
-	  fi
-	  if test -n "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	    test "X$libobjs" = "X " && libobjs=
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    func_append generated " $gentop"
-
-	    func_extract_archives $gentop $convenience
-	    func_append libobjs " $func_extract_archives_result"
-	    test "X$libobjs" = "X " && libobjs=
-	  fi
-	fi
-
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  func_append linker_flags " $flag"
-	fi
-
-	# Make a backup of the uninstalled library when relinking
-	if test "$opt_mode" = relink; then
-	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
-	fi
-
-	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
-	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	    eval test_cmds=\"$module_expsym_cmds\"
-	    cmds=$module_expsym_cmds
-	  else
-	    eval test_cmds=\"$module_cmds\"
-	    cmds=$module_cmds
-	  fi
-	else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    eval test_cmds=\"$archive_expsym_cmds\"
-	    cmds=$archive_expsym_cmds
-	  else
-	    eval test_cmds=\"$archive_cmds\"
-	    cmds=$archive_cmds
-	  fi
-	fi
-
-	if test "X$skipped_export" != "X:" &&
-	   func_len " $test_cmds" &&
-	   len=$func_len_result &&
-	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # The command line is too long to link in one step, link piecewise
-	  # or, if using GNU ld and skipped_export is not :, use a linker
-	  # script.
-
-	  # Save the value of $output and $libobjs because we want to
-	  # use them later.  If we have whole_archive_flag_spec, we
-	  # want to use save_libobjs as it was before
-	  # whole_archive_flag_spec was expanded, because we can't
-	  # assume the linker understands whole_archive_flag_spec.
-	  # This may have to be revisited, in case too many
-	  # convenience libraries get linked in and end up exceeding
-	  # the spec.
-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	  fi
-	  save_output=$output
-	  func_basename "$output"
-	  output_la=$func_basename_result
-
-	  # Clear the reloadable object creation command queue and
-	  # initialize k to one.
-	  test_cmds=
-	  concat_cmds=
-	  objlist=
-	  last_robj=
-	  k=1
-
-	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
-	    output=${output_objdir}/${output_la}.lnkscript
-	    func_verbose "creating GNU ld script: $output"
-	    echo 'INPUT (' > $output
-	    for obj in $save_libobjs
-	    do
-	      func_to_tool_file "$obj"
-	      $ECHO "$func_to_tool_file_result" >> $output
-	    done
-	    echo ')' >> $output
-	    func_append delfiles " $output"
-	    func_to_tool_file "$output"
-	    output=$func_to_tool_file_result
-	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
-	    output=${output_objdir}/${output_la}.lnk
-	    func_verbose "creating linker input file list: $output"
-	    : > $output
-	    set x $save_libobjs
-	    shift
-	    firstobj=
-	    if test "$compiler_needs_object" = yes; then
-	      firstobj="$1 "
-	      shift
-	    fi
-	    for obj
-	    do
-	      func_to_tool_file "$obj"
-	      $ECHO "$func_to_tool_file_result" >> $output
-	    done
-	    func_append delfiles " $output"
-	    func_to_tool_file "$output"
-	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
-	  else
-	    if test -n "$save_libobjs"; then
-	      func_verbose "creating reloadable object files..."
-	      output=$output_objdir/$output_la-${k}.$objext
-	      eval test_cmds=\"$reload_cmds\"
-	      func_len " $test_cmds"
-	      len0=$func_len_result
-	      len=$len0
-
-	      # Loop over the list of objects to be linked.
-	      for obj in $save_libobjs
-	      do
-		func_len " $obj"
-		func_arith $len + $func_len_result
-		len=$func_arith_result
-		if test "X$objlist" = X ||
-		   test "$len" -lt "$max_cmd_len"; then
-		  func_append objlist " $obj"
-		else
-		  # The command $test_cmds is almost too long, add a
-		  # command to the queue.
-		  if test "$k" -eq 1 ; then
-		    # The first file doesn't have a previous command to add.
-		    reload_objs=$objlist
-		    eval concat_cmds=\"$reload_cmds\"
-		  else
-		    # All subsequent reloadable object files will link in
-		    # the last one created.
-		    reload_objs="$objlist $last_robj"
-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
-		  fi
-		  last_robj=$output_objdir/$output_la-${k}.$objext
-		  func_arith $k + 1
-		  k=$func_arith_result
-		  output=$output_objdir/$output_la-${k}.$objext
-		  objlist=" $obj"
-		  func_len " $last_robj"
-		  func_arith $len0 + $func_len_result
-		  len=$func_arith_result
-		fi
-	      done
-	      # Handle the remaining objects by creating one last
-	      # reloadable object file.  All subsequent reloadable object
-	      # files will link in the last one created.
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      reload_objs="$objlist $last_robj"
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
-	      if test -n "$last_robj"; then
-	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
-	      fi
-	      func_append delfiles " $output"
-
-	    else
-	      output=
-	    fi
-
-	    if ${skipped_export-false}; then
-	      func_verbose "generating symbol list for \`$libname.la'"
-	      export_symbols="$output_objdir/$libname.exp"
-	      $opt_dry_run || $RM $export_symbols
-	      libobjs=$output
-	      # Append the command to create the export file.
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
-	      if test -n "$last_robj"; then
-		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
-	      fi
-	    fi
-
-	    test -n "$save_libobjs" &&
-	      func_verbose "creating a temporary reloadable object file: $output"
-
-	    # Loop through the commands generated above and execute them.
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $concat_cmds; do
-	      IFS="$save_ifs"
-	      $opt_silent || {
-		  func_quote_for_expand "$cmd"
-		  eval "func_echo $func_quote_for_expand_result"
-	      }
-	      $opt_dry_run || eval "$cmd" || {
-		lt_exit=$?
-
-		# Restore the uninstalled library and exit
-		if test "$opt_mode" = relink; then
-		  ( cd "$output_objdir" && \
-		    $RM "${realname}T" && \
-		    $MV "${realname}U" "$realname" )
-		fi
-
-		exit $lt_exit
-	      }
-	    done
-	    IFS="$save_ifs"
-
-	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
-	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-
-          if ${skipped_export-false}; then
-	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	      tmp_export_symbols="$export_symbols"
-	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
-	    fi
-
-	    if test -n "$orig_export_symbols"; then
-	      # The given exports_symbols file has to be filtered, so filter it.
-	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	      # 's' commands which not all seds can handle. GNU sed should be fine
-	      # though. Also, the filter scales superlinearly with the number of
-	      # global variables. join(1) would be nice here, but unfortunately
-	      # isn't a blessed tool.
-	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
-	      export_symbols=$output_objdir/$libname.def
-	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-	    fi
-	  fi
-
-	  libobjs=$output
-	  # Restore the value of output.
-	  output=$save_output
-
-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	    test "X$libobjs" = "X " && libobjs=
-	  fi
-	  # Expand the library linking commands again to reset the
-	  # value of $libobjs for piecewise linking.
-
-	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
-	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	      cmds=$module_expsym_cmds
-	    else
-	      cmds=$module_cmds
-	    fi
-	  else
-	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	      cmds=$archive_expsym_cmds
-	    else
-	      cmds=$archive_cmds
-	    fi
-	  fi
-	fi
-
-	if test -n "$delfiles"; then
-	  # Append the command to remove temporary files to $cmds.
-	  eval cmds=\"\$cmds~\$RM $delfiles\"
-	fi
-
-	# Add any objects from preloaded convenience libraries
-	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
-	  func_append generated " $gentop"
-
-	  func_extract_archives $gentop $dlprefiles
-	  func_append libobjs " $func_extract_archives_result"
-	  test "X$libobjs" = "X " && libobjs=
-	fi
-
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $opt_silent || {
-	    func_quote_for_expand "$cmd"
-	    eval "func_echo $func_quote_for_expand_result"
-	  }
-	  $opt_dry_run || eval "$cmd" || {
-	    lt_exit=$?
-
-	    # Restore the uninstalled library and exit
-	    if test "$opt_mode" = relink; then
-	      ( cd "$output_objdir" && \
-	        $RM "${realname}T" && \
-		$MV "${realname}U" "$realname" )
-	    fi
-
-	    exit $lt_exit
-	  }
-	done
-	IFS="$save_ifs"
-
-	# Restore the uninstalled library and exit
-	if test "$opt_mode" = relink; then
-	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
-
-	  if test -n "$convenience"; then
-	    if test -z "$whole_archive_flag_spec"; then
-	      func_show_eval '${RM}r "$gentop"'
-	    fi
-	  fi
-
-	  exit $EXIT_SUCCESS
-	fi
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for objects"
-      fi
-
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for objects" ;;
-      esac
-
-      test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for objects"
-
-      test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for objects"
-
-      test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for objects"
-
-      test -n "$release" && \
-	func_warning "\`-release' is ignored for objects"
-
-      case $output in
-      *.lo)
-	test -n "$objs$old_deplibs" && \
-	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
-
-	libobj=$output
-	func_lo2o "$libobj"
-	obj=$func_lo2o_result
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $opt_dry_run || $RM $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
-      wl=
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
-	else
-	  gentop="$output_objdir/${obj}x"
-	  func_append generated " $gentop"
-
-	  func_extract_archives $gentop $convenience
-	  reload_conv_objs="$reload_objs $func_extract_archives_result"
-	fi
-      fi
-
-      # If we're not building shared, we need to use non_pic_objs
-      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      func_execute_cmds "$reload_cmds" 'exit $?'
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  func_show_eval '${RM}r "$gentop"'
-	fi
-
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  func_show_eval '${RM}r "$gentop"'
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	# $show "echo timestamp > $libobj"
-	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	func_execute_cmds "$reload_cmds" 'exit $?'
-      fi
-
-      if test -n "$gentop"; then
-	func_show_eval '${RM}r "$gentop"'
-      fi
-
-      exit $EXIT_SUCCESS
-      ;;
-
-    prog)
-      case $host in
-	*cygwin*) func_stripname '' '.exe' "$output"
-	          output=$func_stripname_result.exe;;
-      esac
-      test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for programs"
-
-      test -n "$release" && \
-	func_warning "\`-release' is ignored for programs"
-
-      test "$preload" = yes \
-        && test "$dlopen_support" = unknown \
-	&& test "$dlopen_self" = unknown \
-	&& test "$dlopen_self_static" = unknown && \
-	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
-	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
-	;;
-      esac
-
-      case $host in
-      *-*-darwin*)
-	# Don't allow lazy linking, it breaks C++ global constructors
-	# But is supposedly fixed on 10.4 or later (yay!).
-	if test "$tagname" = CXX ; then
-	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
-	    10.[0123])
-	      func_append compile_command " ${wl}-bind_at_load"
-	      func_append finalize_command " ${wl}-bind_at_load"
-	    ;;
-	  esac
-	fi
-	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
-	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	;;
-      esac
-
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $compile_deplibs " in
-	  *" -L$path/$objdir "*)
-	    func_append new_libs " -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $compile_deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) func_append new_libs " $deplib" ;;
-	  esac
-	  ;;
-	*) func_append new_libs " $deplib" ;;
-	esac
-      done
-      compile_deplibs="$new_libs"
-
-
-      func_append compile_command " $compile_deplibs"
-      func_append finalize_command " $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) func_append finalize_rpath " $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    func_append rpath " $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) func_append perm_rpath " $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  ::) dllsearchpath=$libdir;;
-	  *) func_append dllsearchpath ":$libdir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  ::) dllsearchpath=$testbindir;;
-	  *) func_append dllsearchpath ":$testbindir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    func_append rpath " $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) func_append finalize_perm_rpath " $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
-	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
-      fi
-
-      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
-
-      # template prelinking step
-      if test -n "$prelink_cmds"; then
-	func_execute_cmds "$prelink_cmds" 'exit $?'
-      fi
-
-      wrappers_required=yes
-      case $host in
-      *cegcc* | *mingw32ce*)
-        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
-      *cygwin* | *mingw* )
-        if test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
-        ;;
-      *)
-        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
-        ;;
-      esac
-      if test "$wrappers_required" = no; then
-	# Replace the output file specification.
-	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	exit_status=0
-	func_show_eval "$link_command" 'exit_status=$?'
-
-	if test -n "$postlink_cmds"; then
-	  func_to_tool_file "$output"
-	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-	  func_execute_cmds "$postlink_cmds" 'exit $?'
-	fi
-
-	# Delete the generated files.
-	if test -f "$output_objdir/${outputname}S.${objext}"; then
-	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
-	fi
-
-	exit $exit_status
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    func_append rpath "$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    func_append rpath "$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$opt_dry_run || $RM $output
-	# Link the executable and exit
-	func_show_eval "$link_command" 'exit $?'
-
-	if test -n "$postlink_cmds"; then
-	  func_to_tool_file "$output"
-	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-	  func_execute_cmds "$postlink_cmds" 'exit $?'
-	fi
-
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	func_warning "this platform does not like uninstalled shared libraries"
-	func_warning "\`$output' will be relinked during installation"
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      func_show_eval "$link_command" 'exit $?'
-
-      if test -n "$postlink_cmds"; then
-	func_to_tool_file "$output_objdir/$outputname"
-	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-	func_execute_cmds "$postlink_cmds" 'exit $?'
-      fi
-
-      # Now create the wrapper script.
-      func_verbose "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
-	  else
-	    func_quote_for_eval "$var_value"
-	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if not in dry run mode.
-      $opt_dry_run || {
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) func_stripname '' '.exe' "$output"
-	         output=$func_stripname_result ;;
-	esac
-	# test for cygwin because mv fails w/o .exe extensions
-	case $host in
-	  *cygwin*)
-	    exeext=.exe
-	    func_stripname '' '.exe' "$outputname"
-	    outputname=$func_stripname_result ;;
-	  *) exeext= ;;
-	esac
-	case $host in
-	  *cygwin* | *mingw* )
-	    func_dirname_and_basename "$output" "" "."
-	    output_name=$func_basename_result
-	    output_path=$func_dirname_result
-	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
-	    cwrapper="$output_path/$output_name.exe"
-	    $RM $cwrappersource $cwrapper
-	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    func_emit_cwrapperexe_src > $cwrappersource
-
-	    # The wrapper executable is built using the $host compiler,
-	    # because it contains $host paths and files. If cross-
-	    # compiling, it, like the target executable, must be
-	    # executed on the $host or under an emulation environment.
-	    $opt_dry_run || {
-	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
-	      $STRIP $cwrapper
-	    }
-
-	    # Now, create the wrapper script for func_source use:
-	    func_ltwrapper_scriptname $cwrapper
-	    $RM $func_ltwrapper_scriptname_result
-	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
-	    $opt_dry_run || {
-	      # note: this script will not be executed, so do not chmod.
-	      if test "x$build" = "x$host" ; then
-		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
-	      else
-		func_emit_wrapper no > $func_ltwrapper_scriptname_result
-	      fi
-	    }
-	  ;;
-	  * )
-	    $RM $output
-	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
-
-	    func_emit_wrapper no > $output
-	    chmod +x $output
-	  ;;
-	esac
-      }
-      exit $EXIT_SUCCESS
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save $symfileobj"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  oldobjs="$old_deplibs $non_pic_objects"
-	  if test "$preload" = yes && test -f "$symfileobj"; then
-	    func_append oldobjs " $symfileobj"
-	  fi
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	func_append generated " $gentop"
-
-	func_extract_archives $gentop $addlibs
-	func_append oldobjs " $func_extract_archives_result"
-      fi
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	cmds=$old_archive_from_new_cmds
-      else
-
-	# Add any objects from preloaded convenience libraries
-	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
-	  func_append generated " $gentop"
-
-	  func_extract_archives $gentop $dlprefiles
-	  func_append oldobjs " $func_extract_archives_result"
-	fi
-
-	# POSIX demands no paths to be encoded in archives.  We have
-	# to avoid creating archives with duplicate basenames if we
-	# might have to extract them afterwards, e.g., when creating a
-	# static archive out of a convenience library, or when linking
-	# the entirety of a libtool archive into another (currently
-	# not supported by libtool).
-	if (for obj in $oldobjs
-	    do
-	      func_basename "$obj"
-	      $ECHO "$func_basename_result"
-	    done | sort | sort -uc >/dev/null 2>&1); then
-	  :
-	else
-	  echo "copying selected object files to avoid basename conflicts..."
-	  gentop="$output_objdir/${outputname}x"
-	  func_append generated " $gentop"
-	  func_mkdir_p "$gentop"
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  counter=1
-	  for obj in $save_oldobjs
-	  do
-	    func_basename "$obj"
-	    objbase="$func_basename_result"
-	    case " $oldobjs " in
-	    " ") oldobjs=$obj ;;
-	    *[\ /]"$objbase "*)
-	      while :; do
-		# Make sure we don't pick an alternate name that also
-		# overlaps.
-		newobj=lt$counter-$objbase
-		func_arith $counter + 1
-		counter=$func_arith_result
-		case " $oldobjs " in
-		*[\ /]"$newobj "*) ;;
-		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
-		esac
-	      done
-	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      func_append oldobjs " $gentop/$newobj"
-	      ;;
-	    *) func_append oldobjs " $obj" ;;
-	    esac
-	  done
-	fi
-	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
-	tool_oldlib=$func_to_tool_file_result
-	eval cmds=\"$old_archive_cmds\"
-
-	func_len " $cmds"
-	len=$func_len_result
-	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  cmds=$old_archive_cmds
-	elif test -n "$archiver_list_spec"; then
-	  func_verbose "using command file archive linking..."
-	  for obj in $oldobjs
-	  do
-	    func_to_tool_file "$obj"
-	    $ECHO "$func_to_tool_file_result"
-	  done > $output_objdir/$libname.libcmd
-	  func_to_tool_file "$output_objdir/$libname.libcmd"
-	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
-	  cmds=$old_archive_cmds
-	else
-	  # the command line is too long to link in one step, link in parts
-	  func_verbose "using piecewise archive linking..."
-	  save_RANLIB=$RANLIB
-	  RANLIB=:
-	  objlist=
-	  concat_cmds=
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  # Is there a better way of finding the last object in the list?
-	  for obj in $save_oldobjs
-	  do
-	    last_oldobj=$obj
-	  done
-	  eval test_cmds=\"$old_archive_cmds\"
-	  func_len " $test_cmds"
-	  len0=$func_len_result
-	  len=$len0
-	  for obj in $save_oldobjs
-	  do
-	    func_len " $obj"
-	    func_arith $len + $func_len_result
-	    len=$func_arith_result
-	    func_append objlist " $obj"
-	    if test "$len" -lt "$max_cmd_len"; then
-	      :
-	    else
-	      # the above command should be used before it gets too long
-	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
-		RANLIB=$save_RANLIB
-	      fi
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-	      objlist=
-	      len=$len0
-	    fi
-	  done
-	  RANLIB=$save_RANLIB
-	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
-	    eval cmds=\"\$concat_cmds\"
-	  else
-	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
-	  fi
-	fi
-      fi
-      func_execute_cmds "$cmds" 'exit $?'
-    done
-
-    test -n "$generated" && \
-      func_show_eval "${RM}r$generated"
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      func_verbose "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  func_quote_for_eval "$var_value"
-	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-      if test "$hardcode_automatic" = yes ; then
-	relink_command=
-      fi
-
-      # Only create the output if not a dry run.
-      $opt_dry_run || {
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		func_basename "$deplib"
-		name="$func_basename_result"
-		func_resolve_sysroot "$deplib"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
-		test -z "$libdir" && \
-		  func_fatal_error "\`$deplib' is not a valid libtool archive"
-		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
-		;;
-	      -L*)
-		func_stripname -L '' "$deplib"
-		func_replace_sysroot "$func_stripname_result"
-		func_append newdependency_libs " -L$func_replace_sysroot_result"
-		;;
-	      -R*)
-		func_stripname -R '' "$deplib"
-		func_replace_sysroot "$func_stripname_result"
-		func_append newdependency_libs " -R$func_replace_sysroot_result"
-		;;
-	      *) func_append newdependency_libs " $deplib" ;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-
-	    for lib in $dlfiles; do
-	      case $lib in
-	      *.la)
-	        func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
-		;;
-	      *) func_append newdlfiles " $lib" ;;
-	      esac
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-	      *.la)
-		# Only pass preopened files to the pseudo-archive (for
-		# eventual linking with the app. that links it) if we
-		# didn't already link the preopened objects directly into
-		# the library:
-		func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
-		;;
-	      esac
-	    done
-	    dlprefiles="$newdlprefiles"
-	  else
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      func_append newdlfiles " $abs"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      func_append newdlprefiles " $abs"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $RM $output
-	  # place dlname in correct position for cygwin
-	  # In fact, it would be nice if we could use this code for all target
-	  # systems that can't hard-code library paths into their executables
-	  # and that have no shared library path variable independent of PATH,
-	  # but it turns out we can't easily determine that from inspecting
-	  # libtool variables, so we have to hard-code the OSs to which it
-	  # applies here; at the moment, that means platforms that use the PE
-	  # object format with DLL files.  See the long comment at the top of
-	  # tests/bindir.at for full details.
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
-	      # If a -bindir argument was supplied, place the dll there.
-	      if test "x$bindir" != x ;
-	      then
-		func_relative_path "$install_libdir" "$bindir"
-		tdlname=$func_relative_path_result$dlname
-	      else
-		# Otherwise fall back on heuristic.
-		tdlname=../bin/$dlname
-	      fi
-	      ;;
-	  esac
-	  $ECHO > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Linker flags that can not go in dependency_libs.
-inherited_linker_flags='$new_inherited_linker_flags'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Names of additional weak libraries provided by this library
-weak_library_names='$weak_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $ECHO >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      }
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
-      ;;
-    esac
-    exit $EXIT_SUCCESS
-}
-
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
-    func_mode_link ${1+"$@"}
-
-
-# func_mode_uninstall arg...
-func_mode_uninstall ()
-{
-    $opt_debug
-    RM="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) func_append RM " $arg"; rmforce=yes ;;
-      -*) func_append RM " $arg" ;;
-      *) func_append files " $arg" ;;
-      esac
-    done
-
-    test -z "$RM" && \
-      func_fatal_help "you must specify an RM program"
-
-    rmdirs=
-
-    for file in $files; do
-      func_dirname "$file" "" "."
-      dir="$func_dirname_result"
-      if test "X$dir" = X.; then
-	odir="$objdir"
-      else
-	odir="$dir/$objdir"
-      fi
-      func_basename "$file"
-      name="$func_basename_result"
-      test "$opt_mode" = uninstall && odir="$dir"
-
-      # Remember odir for removal later, being careful to avoid duplicates
-      if test "$opt_mode" = clean; then
-	case " $rmdirs " in
-	  *" $odir "*) ;;
-	  *) func_append rmdirs " $odir" ;;
-	esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if { test -L "$file"; } >/dev/null 2>&1 ||
-	 { test -h "$file"; } >/dev/null 2>&1 ||
-	 test -f "$file"; then
-	:
-      elif test -d "$file"; then
-	exit_status=1
-	continue
-      elif test "$rmforce" = yes; then
-	continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if func_lalib_p "$file"; then
-	  func_source $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    func_append rmfiles " $odir/$n"
-	  done
-	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
-
-	  case "$opt_mode" in
-	  clean)
-	    case " $library_names " in
-	    *" $dlname "*) ;;
-	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
-	    esac
-	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
-	    ;;
-	  uninstall)
-	    if test -n "$library_names"; then
-	      # Do each command in the postuninstall commands.
-	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-	    fi
-
-	    if test -n "$old_library"; then
-	      # Do each command in the old_postuninstall commands.
-	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-	    fi
-	    # FIXME: should reinstall the best remaining shared library.
-	    ;;
-	  esac
-	fi
-	;;
-
-      *.lo)
-	# Possibly a libtool object, so verify it.
-	if func_lalib_p "$file"; then
-
-	  # Read the .lo file
-	  func_source $dir/$name
-
-	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" &&
-	     test "$pic_object" != none; then
-	    func_append rmfiles " $dir/$pic_object"
-	  fi
-
-	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" &&
-	     test "$non_pic_object" != none; then
-	    func_append rmfiles " $dir/$non_pic_object"
-	  fi
-	fi
-	;;
-
-      *)
-	if test "$opt_mode" = clean ; then
-	  noexename=$name
-	  case $file in
-	  *.exe)
-	    func_stripname '' '.exe' "$file"
-	    file=$func_stripname_result
-	    func_stripname '' '.exe' "$name"
-	    noexename=$func_stripname_result
-	    # $file with .exe has already been added to rmfiles,
-	    # add $file without .exe
-	    func_append rmfiles " $file"
-	    ;;
-	  esac
-	  # Do a test to see if this is a libtool program.
-	  if func_ltwrapper_p "$file"; then
-	    if func_ltwrapper_executable_p "$file"; then
-	      func_ltwrapper_scriptname "$file"
-	      relink_command=
-	      func_source $func_ltwrapper_scriptname_result
-	      func_append rmfiles " $func_ltwrapper_scriptname_result"
-	    else
-	      relink_command=
-	      func_source $dir/$noexename
-	    fi
-
-	    # note $name still contains .exe if it was in $file originally
-	    # as does the version of $file that was added into $rmfiles
-	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
-	    if test "$fast_install" = yes && test -n "$relink_command"; then
-	      func_append rmfiles " $odir/lt-$name"
-	    fi
-	    if test "X$noexename" != "X$name" ; then
-	      func_append rmfiles " $odir/lt-${noexename}.c"
-	    fi
-	  fi
-	fi
-	;;
-      esac
-      func_show_eval "$RM $rmfiles" 'exit_status=1'
-    done
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-	func_show_eval "rmdir $dir >/dev/null 2>&1"
-      fi
-    done
-
-    exit $exit_status
-}
-
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
-    func_mode_uninstall ${1+"$@"}
-
-test -z "$opt_mode" && {
-  help="$generic_help"
-  func_fatal_help "you must specify a MODE"
-}
-
-test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$opt_mode'"
-
-if test -n "$exec_cmd"; then
-  eval exec "$exec_cmd"
-  exit $EXIT_FAILURE
-fi
-
-exit $exit_status
-
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them.  This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration.  But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
-# vi:sw=2
-
diff --git a/bin/missing b/bin/missing
deleted file mode 100755
index db98974..0000000
--- a/bin/missing
+++ /dev/null
@@ -1,215 +0,0 @@
-#! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
-
-scriptversion=2013-10-28.13; # UTC
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try '$0 --help' for more information"
-  exit 1
-fi
-
-case $1 in
-
-  --is-lightweight)
-    # Used by our autoconf macros to check whether the available missing
-    # script is modern enough.
-    exit 0
-    ;;
-
-  --run)
-    # Back-compat with the calling convention used by older automake.
-    shift
-    ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-
-Supported PROGRAM values:
-  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
-  bison     yacc      flex         lex       help2man
-
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: unknown '$1' option"
-    echo 1>&2 "Try '$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Run the given program, remember its exit status.
-"$@"; st=$?
-
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
-
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch.  This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
-  msg="probably too old"
-elif test $st -eq 127; then
-  # Program was missing.
-  msg="missing on your system"
-else
-  # Program was found and executed, but failed.  Give up.
-  exit $st
-fi
-
-perl_URL=http://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
-gnu_software_URL=http://www.gnu.org/software
-
-program_details ()
-{
-  case $1 in
-    aclocal|automake)
-      echo "The '$1' program is part of the GNU Automake package:"
-      echo "<$gnu_software_URL/automake>"
-      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/autoconf>"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-    autoconf|autom4te|autoheader)
-      echo "The '$1' program is part of the GNU Autoconf package:"
-      echo "<$gnu_software_URL/autoconf/>"
-      echo "It also requires GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-  esac
-}
-
-give_advice ()
-{
-  # Normalize program name to check for.
-  normalized_program=`echo "$1" | sed '
-    s/^gnu-//; t
-    s/^gnu//; t
-    s/^g//; t'`
-
-  printf '%s\n' "'$1' is $msg."
-
-  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
-  case $normalized_program in
-    autoconf*)
-      echo "You should only need it if you modified 'configure.ac',"
-      echo "or m4 files included by it."
-      program_details 'autoconf'
-      ;;
-    autoheader*)
-      echo "You should only need it if you modified 'acconfig.h' or"
-      echo "$configure_deps."
-      program_details 'autoheader'
-      ;;
-    automake*)
-      echo "You should only need it if you modified 'Makefile.am' or"
-      echo "$configure_deps."
-      program_details 'automake'
-      ;;
-    aclocal*)
-      echo "You should only need it if you modified 'acinclude.m4' or"
-      echo "$configure_deps."
-      program_details 'aclocal'
-      ;;
-   autom4te*)
-      echo "You might have modified some maintainer files that require"
-      echo "the 'autom4te' program to be rebuilt."
-      program_details 'autom4te'
-      ;;
-    bison*|yacc*)
-      echo "You should only need it if you modified a '.y' file."
-      echo "You may want to install the GNU Bison package:"
-      echo "<$gnu_software_URL/bison/>"
-      ;;
-    lex*|flex*)
-      echo "You should only need it if you modified a '.l' file."
-      echo "You may want to install the Fast Lexical Analyzer package:"
-      echo "<$flex_URL>"
-      ;;
-    help2man*)
-      echo "You should only need it if you modified a dependency" \
-           "of a man page."
-      echo "You may want to install the GNU Help2man package:"
-      echo "<$gnu_software_URL/help2man/>"
-    ;;
-    makeinfo*)
-      echo "You should only need it if you modified a '.texi' file, or"
-      echo "any other file indirectly affecting the aspect of the manual."
-      echo "You might want to install the Texinfo package:"
-      echo "<$gnu_software_URL/texinfo/>"
-      echo "The spurious makeinfo call might also be the consequence of"
-      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
-      echo "want to install GNU make:"
-      echo "<$gnu_software_URL/make/>"
-      ;;
-    *)
-      echo "You might have modified some files without having the proper"
-      echo "tools for further handling them.  Check the 'README' file, it"
-      echo "often tells you about the needed prerequisites for installing"
-      echo "this package.  You may also peek at any GNU archive site, in"
-      echo "case some other package contains this missing '$1' program."
-      ;;
-  esac
-}
-
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
-                       -e '2,$s/^/         /' >&2
-
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/bin/mkinstalldirs b/bin/mkinstalldirs
deleted file mode 100755
index 994d71c..0000000
--- a/bin/mkinstalldirs
+++ /dev/null
@@ -1,101 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-# $Id$
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-
-# process command line arguments
-while test $# -gt 0 ; do
-   case "${1}" in
-     -h | --help | --h* )			# -h for help
-	echo "${usage}" 1>&2; exit 0 ;;
-     -m )					# -m PERM arg
-	shift
-	test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
-	dirmode="${1}"
-	shift ;;
-     -- ) shift; break ;;			# stop option processing
-     -* ) echo "${usage}" 1>&2; exit 1 ;;	# unknown option
-     * )  break ;;				# first non-opt arg
-   esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-0) exit 0 ;;
-esac
-
-case $dirmode in
-'')
-  if mkdir -p -- . 2>/dev/null; then
-    echo "mkdir -p -- $*"
-    exec mkdir -p -- "$@"
-  fi ;;
-*)
-  if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
-    echo "mkdir -m $dirmode -p -- $*"
-    exec mkdir -m "$dirmode" -p -- "$@"
-  fi ;;
-esac
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-	echo "mkdir $pathcomp"
-
-	mkdir "$pathcomp" || lasterr=$?
-
-	if test ! -d "$pathcomp"; then
-	  errstatus=$lasterr
-	else
-	  if test ! -z "$dirmode"; then
-	     echo "chmod $dirmode $pathcomp"
-
-	     lasterr=""
-	     chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-	     if test ! -z "$lasterr"; then
-	       errstatus=$lasterr
-	     fi
-	  fi
-	fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 3
-# End:
-# mkinstalldirs ends here
diff --git a/bin/reconfigure b/bin/reconfigure
deleted file mode 100755
index 7a0f437..0000000
--- a/bin/reconfigure
+++ /dev/null
@@ -1,152 +0,0 @@
-#! /bin/sh
-#
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-
-# A script to reconfigure autotools for HDF5, and to recreate other
-# generated files specifc to HDF5.
-# If the paths of the autotools are not specified by the user, they
-# are hardcoded to point to their locations on HDF5 Linux machines.
-# Users can specify the locations of the autotools with the following
-# variables:
-# AUTOCONF, AUTOMAKE, ACLOCAL, AUTOHEADER should be the path to the
-# corresponding tools.
-# LIBTOOL_DIR should be the path to the base libtool directory;
-# $LIBTOOL_DIR/bin/libtool should invoke libtool, while
-# $LIBTOOL_DIR/share/aclocal needs to be included by aclocal.
-# Be very careful when specifying these tools manually!  There are a lot
-# of versions that can get confused (not even counting the m4 utility)!
-
-# HDF5 currently uses the following versions of the autotools:
-AUTOCONF_VERSION="autoconf (GNU Autoconf) 2.69"
-AUTOMAKE_VERSION="automake (GNU automake) 1.14.1"
-AUTOHEADER_VERSION="autoheader (GNU Autoconf) 2.69"
-ACLOCAL_VERSION="aclocal (GNU automake) 1.14.1"
-LIBTOOL_VERSION="(GNU libtool) 2.4.2"
-M4_VERSION="m4 (GNU M4) 1.4.17"
-
-#
-# When upgrading automake's version, don't forget to also update its
-# helper utilities, especially depcomp.
-
-
-# If paths to autotools are not specified by the user, assume tools are
-# running on jam in /mnt/hdf/packages and set paths accordingly.
-if test -z ${AUTORECONF}; then
-  AUTORECONF=/mnt/hdf/packages/autoconf/autoconf-2.69/bin/autoreconf
-fi
-if test -z ${AUTOCONF}; then
-  AUTOCONF=/mnt/hdf/packages/autoconf/autoconf-2.69/bin/autoconf
-fi
-if test -z ${AUTOMAKE}; then
-  AUTOMAKE=/mnt/hdf/packages/automake/automake-1.14.1/bin/automake-1.14
-fi
-if test -z ${AUTOHEADER}; then
-  AUTOHEADER=/mnt/hdf/packages/autoconf/autoconf-2.69/bin/autoheader
-fi
-if test -z ${ACLOCAL}; then
-  ACLOCAL=/mnt/hdf/packages/automake/automake-1.14.1/bin/aclocal-1.14
-fi
-if test -z ${LIBTOOL}; then
-  LIBTOOL=/mnt/hdf/packages/libtool/libtool-2.4.2/bin/libtool
-fi
-if test -z ${M4}; then
-  M4=/mnt/hdf/packages/m4/m4-1.4.17/bin/m4
-fi
-
-# Check version numbers of all autotools against the "correct" versions
-AC_VERS=`${AUTOCONF} --version 2>&1 | grep "^${AUTOCONF_VERSION}"`
-if test -z "${AC_VERS}"; then
-   echo "${AUTOCONF} version is not ${AUTOCONF_VERSION}"
-   exit 1
-fi
-AM_VERS=`${AUTOMAKE} --version 2>&1 | grep "^${AUTOMAKE_VERSION}"`
-if test -z "${AM_VERS}"; then
-   echo "${AUTOMAKE} version is not ${AUTOMAKE_VERSION}"
-   exit 1
-fi
-AH_VERS=`${AUTOHEADER} --version 2>&1 | grep "^${AUTOHEADER_VERSION}"`
-if test -z "${AH_VERS}"; then
-   echo "${AUTOHEADER} version is not ${AUTOHEADER_VERSION}"
-   exit 1
-fi
-AL_VERS=`${ACLOCAL} --version 2>&1 | grep "^${ACLOCAL_VERSION}"`
-if test -z "${AL_VERS}"; then
-   echo "${ACLOCAL} version is not ${ACLOCAL_VERSION}"
-   exit 1
-fi
-LT_VERS=`${LIBTOOL} --version 2>&1 | grep "${LIBTOOL_VERSION}"`
-if test -z "${LT_VERS}"; then
-   echo "${LIBTOOL} version is not ${LIBTOOL_VERSION}"
-   exit 1
-fi
-M4_VERS=`${M4} --version 2>&1 | grep "${M4_VERSION}"`
-if test -z "${M4_VERS}"; then
-   echo "${M4} version is not ${M4_VERSION}"
-   exit 1
-fi
-
-# Make sure that the tools are in the path.
-AUTOCONF_DIR=`dirname ${AUTOCONF}`
-LIBTOOL_DIR=`dirname ${LIBTOOL}`
-M4_DIR=`dirname ${M4}`
-PATH=${AUTOCONF_DIR}:${M4_DIR}:$PATH
-
-# Run autoconf/automake commands in order
-  echo ${ACLOCAL} -I ${LIBTOOL_DIR}/../share/aclocal
-  ${ACLOCAL} -I ${LIBTOOL_DIR}/../share/aclocal || exit 1
-
-  echo ${AUTOHEADER}
-  ${AUTOHEADER} || exit 1
-
-  echo ${AUTOMAKE} --add-missing
-  ${AUTOMAKE} --add-missing || exit 1
-
-  echo ${AUTOCONF}
-  ${AUTOCONF} || exit 1
-
-# Clean up top-level Makefile.in
-# pmake wants an argument to be the first non-comment line it encounters
-# in the Makefile.  Automake wants to reorganize the Makefile.
-# To work around this, we post-process the top-level Makefile.in.
-  sed "s/^#xxx//" Makefile.in > Makefile.in.new
-  mv Makefile.in.new Makefile.in
-
-# Run trace script
-# The trace script adds H5TRACE macros to library source files.  It should
-# have no effect on files that don't have HDF5 API macros in them.
-echo
-echo "    Running trace script:"
-bin/trace src/H5*.c || exit 1
-
-# Run make_err
-# make_err automatically generates the H5E headers that create error message
-# types for HDF5.
-echo
-echo "    Running error generation script:"
-bin/make_err src/H5err.txt || exit 1
-
-# Run make_vers
-# make_vers automatically generates the public headers that define the API version
-# macros for HDF5.
-echo
-echo "    Running API version generation script:"
-bin/make_vers src/H5vers.txt || exit 1
-
-# Run flex
-# automatically generates the lexical file for hl/src/H5LTanalyze.c
-echo
-echo "    Running flex generation script:"
-bin/genltanalyze || exit 1
-
-exit 0
diff --git a/bin/test-driver b/bin/test-driver
deleted file mode 100755
index d306056..0000000
--- a/bin/test-driver
+++ /dev/null
@@ -1,139 +0,0 @@
-#! /bin/sh
-# test-driver - basic testsuite driver script.
-
-scriptversion=2013-07-13.22; # UTC
-
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-# Make unconditional expansion of undefined variables an error.  This
-# helps a lot in preventing typo-related bugs.
-set -u
-
-usage_error ()
-{
-  echo "$0: $*" >&2
-  print_usage >&2
-  exit 2
-}
-
-print_usage ()
-{
-  cat <<END
-Usage:
-  test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
-              [--expect-failure={yes|no}] [--color-tests={yes|no}]
-              [--enable-hard-errors={yes|no}] [--]
-              TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
-The '--test-name', '--log-file' and '--trs-file' options are mandatory.
-END
-}
-
-test_name= # Used for reporting.
-log_file=  # Where to save the output of the test script.
-trs_file=  # Where to save the metadata of the test run.
-expect_failure=no
-color_tests=no
-enable_hard_errors=yes
-while test $# -gt 0; do
-  case $1 in
-  --help) print_usage; exit $?;;
-  --version) echo "test-driver $scriptversion"; exit $?;;
-  --test-name) test_name=$2; shift;;
-  --log-file) log_file=$2; shift;;
-  --trs-file) trs_file=$2; shift;;
-  --color-tests) color_tests=$2; shift;;
-  --expect-failure) expect_failure=$2; shift;;
-  --enable-hard-errors) enable_hard_errors=$2; shift;;
-  --) shift; break;;
-  -*) usage_error "invalid option: '$1'";;
-   *) break;;
-  esac
-  shift
-done
-
-missing_opts=
-test x"$test_name" = x && missing_opts="$missing_opts --test-name"
-test x"$log_file"  = x && missing_opts="$missing_opts --log-file"
-test x"$trs_file"  = x && missing_opts="$missing_opts --trs-file"
-if test x"$missing_opts" != x; then
-  usage_error "the following mandatory options are missing:$missing_opts"
-fi
-
-if test $# -eq 0; then
-  usage_error "missing argument"
-fi
-
-if test $color_tests = yes; then
-  # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
-  red='' # Red.
-  grn='' # Green.
-  lgn='' # Light green.
-  blu='' # Blue.
-  mgn='' # Magenta.
-  std=''     # No color.
-else
-  red= grn= lgn= blu= mgn= std=
-fi
-
-do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
-trap "st=129; $do_exit" 1
-trap "st=130; $do_exit" 2
-trap "st=141; $do_exit" 13
-trap "st=143; $do_exit" 15
-
-# Test script is run here.
-"$@" >$log_file 2>&1
-estatus=$?
-if test $enable_hard_errors = no && test $estatus -eq 99; then
-  estatus=1
-fi
-
-case $estatus:$expect_failure in
-  0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
-  0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
-  77:*)  col=$blu res=SKIP  recheck=no  gcopy=yes;;
-  99:*)  col=$mgn res=ERROR recheck=yes gcopy=yes;;
-  *:yes) col=$lgn res=XFAIL recheck=no  gcopy=yes;;
-  *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
-esac
-
-# Report outcome to console.
-echo "${col}${res}${std}: $test_name"
-
-# Register the test result, and other relevant metadata.
-echo ":test-result: $res" > $trs_file
-echo ":global-test-result: $res" >> $trs_file
-echo ":recheck: $recheck" >> $trs_file
-echo ":copy-in-global-log: $gcopy" >> $trs_file
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/c++/Makefile.in b/c++/Makefile.in
deleted file mode 100644
index ff18fff..0000000
--- a/c++/Makefile.in
+++ /dev/null
@@ -1,1385 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Top-level HDF5-C++ Makefile(.in)
-# 
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver COPYING
-TESTS =
-subdir = c++
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	check recheck distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-@BUILD_CXX_CONDITIONAL_TRUE@SUBDIRS = src test
-DIST_SUBDIRS = src test examples
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign c++/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign c++/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
-all-am: Makefile all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) check-am install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
-	check check-TESTS check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installcheck-local installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Install examples
-install-examples uninstall-examples:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-installcheck-local:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-# Clean examples when check-clean is invoked
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS) examples; do                                   \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in
deleted file mode 100644
index 1d7dcbe..0000000
--- a/c++/examples/Makefile.in
+++ /dev/null
@@ -1,1339 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Examples Makefile(.in)
-#
-
-# We can't tell automake about example programs, because they need to be
-# built using h5cc (or h5fc, etc.) instead of the standard compilers.
-# This creates some extra work for us.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/examples.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/run-c++-ex.sh.in $(srcdir)/testh5c++.sh.in \
-	$(top_srcdir)/bin/test-driver
-TESTS = $(TEST_SCRIPT)
-subdir = c++/examples
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = run-c++-ex.sh testh5c++.sh
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
-INSTALL_SCRIPT_FILES = run-c++-ex.sh
-
-# These are the programs that 'make all' or 'make prog' will build and
-# which 'make check' will run.  List them in the order they should be run.
-EXAMPLE_PROG = create readdata writedata compound extend_ds chunks h5group \
-	     h5tutr_cmprss h5tutr_crtatt h5tutr_crtdat h5tutr_crtgrpar \
-	     h5tutr_crtgrp h5tutr_crtgrpd h5tutr_extend h5tutr_rdwt \
-	     h5tutr_subset
-
-TEST_SCRIPT = testh5c++.sh
-TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
-
-# These are the example files to be installed
-INSTALL_FILES = create.cpp readdata.cpp writedata.cpp compound.cpp \
-              extend_ds.cpp chunks.cpp h5group.cpp \
-	      h5tutr_cmprss.cpp h5tutr_crtatt.cpp h5tutr_crtdat.cpp \
-	      h5tutr_crtgrpar.cpp h5tutr_crtgrp.cpp h5tutr_crtgrpd.cpp \
-	      h5tutr_extend.cpp h5tutr_rdwt.cpp h5tutr_subset.cpp
-
-
-# Tell conclude.am that these are C++ tests.
-CXX_API = yes
-
-# Where to install examples
-# Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/c++
-EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples
-
-# Assume that all tests in this directory are examples, and tell
-# conclude.am when to build them.
-EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# We need to tell automake what to clean
-MOSTLYCLEANFILES = *.raw *.meta *.o
-CLEANFILES = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign c++/examples/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign c++/examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-run-c++-ex.sh: $(top_builddir)/config.status $(srcdir)/run-c++-ex.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-testh5c++.sh: $(top_builddir)/config.status $(srcdir)/testh5c++.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am all-local check check-TESTS check-am clean \
-	clean-generic clean-libtool cscopelist-am ctags-am distclean \
-	distclean-generic distclean-libtool distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-data-local install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installcheck-local installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags-am uninstall uninstall-am \
-	uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Some of the examples depend on files created by running other examples
-readdata.chkexe_: create.chkexe_
-chunks.chkexe_: extend_ds.chkexe_
-h5tutr_rdwt.chkexe_: h5tutr_crtdat.chkexe
-h5tutrcrtatt.chkexe_: h5tutr_crtdat.chkexe
-h5tutr_crtgrpd.chkexe_: h5tutr_crtgrpar.chkexe
-
-# How to build programs using h5c++
-$(EXTRA_PROG): $(H5CPP)
-	$(H5CPP) $(H5CCFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/$@.cpp
-
-# List dependencies for each program.  Normally, automake would take
-# care of this for us, but if we tell automake about the programs it
-# will try to build them with the normal C++ compiler, not h5c++.  This is
-# an inelegant way of solving the problem, unfortunately.
-create: $(srcdir)/create.cpp
-readdata: $(srcdir)/readdata.cpp
-writedata: $(srcdir)/writedata.cpp
-compound: $(srcdir)/compound.cpp
-extend_ds: $(srcdir)/extend_ds.cpp
-chunks: $(srcdir)/chunks.cpp
-h5group: $(srcdir)/h5group.cpp
-
-h5tutr_cmprss: $(srcdir)/h5tutr_cmprss.cpp
-h5tutr_crtatt: $(srcdir)/h5tutr_crtatt.cpp
-h5tutr_crtdat: $(srcdir)/h5tutr_crtdat.cpp
-h5tutr_crtgrpar: $(srcdir)/h5tutr_crtgrpar.cpp
-h5tutr_crtgrp: $(srcdir)/h5tutr_crtgrp.cpp
-h5tutr_crtgrpd: $(srcdir)/h5tutr_crtgrpd.cpp
-h5tutr_extend: $(srcdir)/h5tutr_extend.cpp
-h5tutr_rdwt: $(srcdir)/h5tutr_rdwt.cpp
-h5tutr_subset: $(srcdir)/h5tutr_subset.cpp
-
-# How to create EXAMPLEDIR if it doesn't already exist
-$(EXAMPLEDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-$(EXAMPLETOPDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-
-# Install and uninstall rules.  We install the source files, not the
-# example programs themselves.
-install-data-local:
-	@$(MAKE) $(AM_MAKEFLAGS) install-examples
-uninstall-local:
-	@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
-
-install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) 
-	@for f in X $(INSTALL_FILES); do                                     \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);    \
-            chmod a-x $(EXAMPLEDIR)/$$f;                                     \
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_SCRIPT_FILES); do                                   \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-            chmod a-x $(EXAMPLETOPDIR)/$$f;\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_SCRIPT_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-	  fi;                                                                \
-	done
-
-uninstall-examples:
-	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then             \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES);                \
-	fi
-	@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then           \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES);              \
-	fi
-	@if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES);       \
-	fi
-	@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES);       \
-	fi
-
-installcheck-local:
-	@if test "$(STATIC_SHARED)" = "static, shared"; then               \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	  $(MAKE) $(AM_MAKEFLAGS) clean;                                   \
-	  H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check;                      \
-	elif test "$(STATIC_SHARED)" = "shared"; then                     \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	else                                                              \
-	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	fi 
-	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
-	    echo "============================";                                         \
-	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
-	    echo "============================";                                         \
-	    (cd $(EXAMPLEDIR);                                                           \
-	     /bin/sh ./$(TEST_EXAMPLES_SCRIPT);)                                                   \
-	fi
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in
deleted file mode 100644
index 8eeb1bb..0000000
--- a/c++/src/Makefile.in
+++ /dev/null
@@ -1,1535 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5-C++ Makefile(.in)
-#
-
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/lt_vers.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/h5c++.in $(top_srcdir)/bin/depcomp \
-	$(include_HEADERS) $(top_srcdir)/bin/test-driver
-TESTS =
-subdir = c++/src
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = h5c++
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
-	"$(DESTDIR)$(includedir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libhdf5_cpp_la_DEPENDENCIES = $(LIBHDF5)
-am_libhdf5_cpp_la_OBJECTS = H5Exception.lo H5IdComponent.lo \
-	H5Library.lo H5Attribute.lo H5Location.lo H5Object.lo \
-	H5PropList.lo H5FaccProp.lo H5FcreatProp.lo H5DcreatProp.lo \
-	H5DxferProp.lo H5DataType.lo H5DataSpace.lo H5AbstractDs.lo \
-	H5AtomType.lo H5PredType.lo H5EnumType.lo H5IntType.lo \
-	H5FloatType.lo H5StrType.lo H5ArrayType.lo H5VarLenType.lo \
-	H5CompType.lo H5DataSet.lo H5CommonFG.lo H5Group.lo H5File.lo
-libhdf5_cpp_la_OBJECTS = $(am_libhdf5_cpp_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-libhdf5_cpp_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CXXLD) \
-	$(AM_CXXFLAGS) $(CXXFLAGS) $(libhdf5_cpp_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
-SCRIPTS = $(bin_SCRIPTS)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CXXFLAGS) $(CXXFLAGS)
-AM_V_CXX = $(am__v_CXX_@AM_V@)
-am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
-am__v_CXX_0 = @echo "  CXX     " $@;
-am__v_CXX_1 = 
-CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
-	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
-am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
-am__v_CXXLD_0 = @echo "  CXXLD   " $@;
-am__v_CXXLD_1 = 
-SOURCES = $(libhdf5_cpp_la_SOURCES)
-DIST_SOURCES = $(libhdf5_cpp_la_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-HEADERS = $(include_HEADERS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src directory
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# Add libtool shared library version numbers to the HDF5 library
-# See libtool versioning documentation online.
-# After making changes, run bin/reconfigure to update other configure related
-# files like Makefile.in.
-LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 221
-LT_VERS_AGE = 0
-
-# This is our main target
-lib_LTLIBRARIES = libhdf5_cpp.la
-
-# Add libtool numbers to the HDF5 C++ library (from config/lt_vers.am)
-libhdf5_cpp_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVISION):$(LT_VERS_AGE) $(AM_LDFLAGS)
-bin_SCRIPTS = h5c++
-
-# Source files for the library
-libhdf5_cpp_la_SOURCES = H5Exception.cpp H5IdComponent.cpp H5Library.cpp        \
-        H5Attribute.cpp H5Location.cpp H5Object.cpp H5PropList.cpp	      \
-	H5FaccProp.cpp H5FcreatProp.cpp H5DcreatProp.cpp H5DxferProp.cpp      \
-	H5DataType.cpp H5DataSpace.cpp H5AbstractDs.cpp H5AtomType.cpp        \
-	H5PredType.cpp H5EnumType.cpp H5IntType.cpp H5FloatType.cpp           \
-	H5StrType.cpp H5ArrayType.cpp H5VarLenType.cpp H5CompType.cpp         \
-	H5DataSet.cpp H5CommonFG.cpp H5Group.cpp H5File.cpp
-
-
-# HDF5 C++ library depends on HDF5 Library.
-libhdf5_cpp_la_LIBADD = $(LIBHDF5)
-
-# Public headers
-include_HEADERS = H5Cpp.h H5AbstractDs.h H5AtomType.h H5Attribute.h H5Classes.h \
-        H5CommonFG.h H5CompType.h H5DataSet.h H5DataSpace.h H5DataType.h      \
-        H5DcreatProp.h H5DxferProp.h H5EnumType.h H5Exception.h H5FaccProp.h  \
-        H5FcreatProp.h H5File.h H5FloatType.h H5Group.h H5IdComponent.h       \
-        H5Include.h H5IntType.h H5Library.h H5Location.h H5Object.h           \
-	H5PredType.h H5PropList.h H5StrType.h H5CppDoc.h H5ArrayType.h        \
-	H5VarLenType.h      
-
-
-# h5c++ and libhdf5.settings are generated during configure.  Remove only when
-# distclean.
-DISTCLEANFILES = h5c++ libhdf5.settings
-
-# Mark this directory as part of the C++ API
-CXX_API = yes
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign c++/src/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign c++/src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-h5c++: $(top_builddir)/config.status $(srcdir)/h5c++.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-	}
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	test -z "$$locs" || { \
-	  echo rm -f $${locs}; \
-	  rm -f $${locs}; \
-	}
-
-libhdf5_cpp.la: $(libhdf5_cpp_la_OBJECTS) $(libhdf5_cpp_la_DEPENDENCIES) $(EXTRA_libhdf5_cpp_la_DEPENDENCIES) 
-	$(AM_V_CXXLD)$(libhdf5_cpp_la_LINK) -rpath $(libdir) $(libhdf5_cpp_la_OBJECTS) $(libhdf5_cpp_la_LIBADD) $(LIBS)
-install-binSCRIPTS: $(bin_SCRIPTS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n' \
-	    -e 'h;s|.*|.|' \
-	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
-	      if (++n[d] == $(am__install_max)) { \
-		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
-	    else { print "f", d "/" $$4, $$1 } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	     test -z "$$files" || { \
-	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	     } \
-	; done
-
-uninstall-binSCRIPTS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	       sed -e 's,.*/,,;$(transform)'`; \
-	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5AbstractDs.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5ArrayType.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5AtomType.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Attribute.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5CommonFG.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5CompType.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataSet.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataSpace.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataType.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DcreatProp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DxferProp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5EnumType.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Exception.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FaccProp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FcreatProp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5File.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FloatType.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Group.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IdComponent.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IntType.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Library.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Location.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Object.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PredType.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PropList.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5StrType.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5VarLenType.Plo@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.cpp.lo:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-includeHEADERS: $(include_HEADERS)
-	@$(NORMAL_INSTALL)
-	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
-	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
-	done
-
-uninstall-includeHEADERS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(HEADERS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-includeHEADERS
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binSCRIPTS install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \
-	uninstall-libLTLIBRARIES
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-generic clean-libLTLIBRARIES \
-	clean-libtool cscopelist-am ctags ctags-am distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-binSCRIPTS install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am \
-	install-includeHEADERS install-info install-info-am \
-	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
-	uninstall-binSCRIPTS uninstall-includeHEADERS \
-	uninstall-libLTLIBRARIES
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-# Some C++ compilers/linkers (PGI?) create a directory named "ii_files" that
-# holds *.ii files, which are template entity instantiations.
-# This entire directory should be cleaned.
-mostlyclean-local:
-	@if test -d ii_files; then                                       \
-	  $(RM) -rf ii_files;                                           \
-	fi
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/c++/src/cpp_doc_config b/c++/src/cpp_doc_config
index b7754ce..c020531 100644
--- a/c++/src/cpp_doc_config
+++ b/c++/src/cpp_doc_config
@@ -38,7 +38,7 @@ PROJECT_NAME           = "HDF5 C++ API"
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = "1.9.231 currently under development"
+PROJECT_NUMBER         = "1.9.232 currently under development"
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a
diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in
deleted file mode 100644
index 380bd32..0000000
--- a/c++/test/Makefile.in
+++ /dev/null
@@ -1,1390 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5-C++ Makefile(.in)
-#
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/H5srcdir_str.h.in $(top_srcdir)/bin/depcomp \
-	$(top_srcdir)/bin/test-driver
-check_PROGRAMS = $(am__EXEEXT_1)
-TESTS = $(am__EXEEXT_1)
-subdir = c++/test
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = H5srcdir_str.h
-CONFIG_CLEAN_VPATH_FILES =
-am__EXEEXT_1 = testhdf5$(EXEEXT)
-am_testhdf5_OBJECTS = testhdf5.$(OBJEXT) dsets.$(OBJEXT) \
-	tattr.$(OBJEXT) tcompound.$(OBJEXT) tdspl.$(OBJEXT) \
-	tfile.$(OBJEXT) tfilter.$(OBJEXT) th5s.$(OBJEXT) \
-	tlinks.$(OBJEXT) tobject.$(OBJEXT) trefer.$(OBJEXT) \
-	ttypes.$(OBJEXT) tvlstr.$(OBJEXT) h5cpputil.$(OBJEXT)
-testhdf5_OBJECTS = $(am_testhdf5_OBJECTS)
-testhdf5_LDADD = $(LDADD)
-testhdf5_DEPENDENCIES = $(LIBH5TEST) $(LIBH5CPP) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CXXFLAGS) $(CXXFLAGS)
-AM_V_CXX = $(am__v_CXX_@AM_V@)
-am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
-am__v_CXX_0 = @echo "  CXX     " $@;
-am__v_CXX_1 = 
-CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
-	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
-am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
-am__v_CXXLD_0 = @echo "  CXXLD   " $@;
-am__v_CXXLD_1 = 
-SOURCES = $(testhdf5_SOURCES)
-DIST_SOURCES = $(testhdf5_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src, test, and c++/src directories
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/test -I$(top_srcdir)/c++/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-# Temporary files
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 tattr_multi.h5 \
-	tfattrs.h5 tattr_scalar.h5 tattr_compound.h5 tattr_dtype.h5 \
-	tattr_basic.h5
-
-# These are our main targets.  They should be listed in the order to be
-# executed, generally most specific tests to least specific tests.
-TEST_PROG = testhdf5
-
-# The tests depend on the hdf5 library, test library, and the c++ library
-LDADD = $(LIBH5TEST) $(LIBH5CPP) $(LIBHDF5)
-testhdf5_SOURCES = testhdf5.cpp dsets.cpp tattr.cpp tcompound.cpp	\
-	tdspl.cpp tfile.cpp tfilter.cpp th5s.cpp tlinks.cpp tobject.cpp \
-	trefer.cpp ttypes.cpp tvlstr.cpp h5cpputil.cpp
-
-
-# Tell conclude.am that these are C++ tests.
-CXX_API = yes
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign c++/test/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign c++/test/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-H5srcdir_str.h: $(top_builddir)/config.status $(srcdir)/H5srcdir_str.h.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-testhdf5$(EXEEXT): $(testhdf5_OBJECTS) $(testhdf5_DEPENDENCIES) $(EXTRA_testhdf5_DEPENDENCIES) 
-	@rm -f testhdf5$(EXEEXT)
-	$(AM_V_CXXLD)$(CXXLINK) $(testhdf5_OBJECTS) $(testhdf5_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dsets.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5cpputil.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tattr.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tcompound.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tdspl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testhdf5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tfile.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tfilter.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/th5s.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlinks.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tobject.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefer.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttypes.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvlstr.Po@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.cpp.lo:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-testhdf5.log: testhdf5$(EXEEXT)
-	@p='testhdf5$(EXEEXT)'; \
-	b='testhdf5'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Some C++ compilers/linkers (PGI?) create a directory named "ii_files" that
-# holds *.ii files, which are template entity instantiations.
-# This entire directory should be cleaned.
-mostlyclean-local:
-	@if test -d ii_files; then                                       \
-	  $(RM) -rf ii_files;                                           \
-	fi
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/c++/test/testhdf5.cpp b/c++/test/testhdf5.cpp
index 19b4f0d..59b16cf 100644
--- a/c++/test/testhdf5.cpp
+++ b/c++/test/testhdf5.cpp
@@ -134,3 +134,4 @@ Comment out tests that are not done yet */
 
     return (GetTestNumErrs());
 }
+
diff --git a/c++/test/tlinks.cpp b/c++/test/tlinks.cpp
index 33d10ea..572f649 100644
--- a/c++/test/tlinks.cpp
+++ b/c++/test/tlinks.cpp
@@ -47,7 +47,7 @@
  * This file needs to access private information from the H5G package.
  * This file also needs to access the group testing code.
  */
-//#define H5G_PACKAGE
+//#define H5G_FRIEND
 //#define H5G_TESTING
 
 //#include "h5test.h"
@@ -622,7 +622,7 @@ void test_links()
 	/* Close 2nd FAPL */
 	H5Pclose(fapl2_id);
 
-	h5_cleanup(FILENAME, fapl_id);
+	h5_clean_files(FILENAME, fapl_id);
 
 	/* Test that external links can be used after a library reset.  MUST be
 	* called last so the reset doesn't interfere with the property lists.  This
diff --git a/c++/test/ttypes.cpp b/c++/test/ttypes.cpp
index 2e64051..aae5d86 100644
--- a/c++/test/ttypes.cpp
+++ b/c++/test/ttypes.cpp
@@ -57,7 +57,7 @@
 
 /* Alignment test stuff */
 #ifdef TEST_ALIGNMENT
-#define H5T_PACKAGE
+#define H5T_FRIEND
 #include "H5Tpkg.h"
 #endif
 #define SET_ALIGNMENT(TYPE,VAL) \
diff --git a/config/cmake/HDF5Macros.cmake b/config/cmake/HDF5Macros.cmake
index 976b910..9b36f53 100644
--- a/config/cmake/HDF5Macros.cmake
+++ b/config/cmake/HDF5Macros.cmake
@@ -41,3 +41,73 @@ macro (H5_SET_LIB_OPTIONS libtarget libname libtype)
   endif (APPLE)
 
 endmacro (H5_SET_LIB_OPTIONS)
+
+macro (H5_GEN_PERL_FILES)
+  find_package (Perl)
+  if (PERL_FOUND)
+    add_custom_command (
+        OUTPUT ${HDF5_BINARY_DIR}/H5Edefin.h
+        PRE_BUILD
+        COMMAND ${PERL_EXECUTABLE}
+        ARGS ${HDF5_SOURCE_DIR}/bin/make_err ${HDF5_SOURCE_DIR}/src/H5err.txt
+        DEPENDS ${HDF5_SOURCE_DIR}/src/H5err.txt
+        COMMENT " Creating err header"
+    )
+
+    add_custom_command (
+        OUTPUT ${HDF5_BINARY_DIR}/H5version.h
+        PRE_BUILD
+        COMMAND ${PERL_EXECUTABLE}
+        ARGS ${HDF5_SOURCE_DIR}/bin/make_vers  ${HDF5_SOURCE_DIR}/src/H5vers.txt
+        DEPENDS ${HDF5_SOURCE_DIR}/src/H5vers.txt
+       COMMENT " Creating API version macro"
+    )
+
+    add_custom_command (
+        OUTPUT ${HDF5_BINARY_DIR}/H5overflow.h
+        PRE_BUILD
+        COMMAND ${PERL_EXECUTABLE}
+        ARGS ${HDF5_SOURCE_DIR}/bin/make_overflow  ${HDF5_SOURCE_DIR}/src/H5overflow.txt
+        DEPENDS ${HDF5_SOURCE_DIR}/src/H5overflow.txt
+        COMMENT " Creating Assignment overflow macro"
+    )
+
+    add_custom_target(run_perl_scripts ALL
+        DEPENDS ${HDF5_BINARY_DIR}/H5Edefin.h ${HDF5_BINARY_DIR}/H5version.h ${HDF5_BINARY_DIR}/H5overflow.h
+    )
+  else (PERL_FOUND)
+    message (STATUS "Cannot generate headers - perl not found")
+  endif (PERL_FOUND)
+endmacro (H5_GEN_PERL_FILES)
+
+macro (H5_GEN_FLEX_FILES)
+  find_package (BISON)
+  if (BISON_FOUND)
+    find_package (FLEX)
+    if (FLEX_FOUND)
+      BISON_TARGET (H5LT_PARSER H5LTparse.y ${CMAKE_CURRENT_BINARY_DIR}/H5LTparse.c COMPILE_FLAGS -d)
+      if (WIN32)
+        FLEX_TARGET (H5LT_SCANNER H5LTanalyze.l ${CMAKE_CURRENT_BINARY_DIR}/H5LTanalyze.c COMPILE_FLAGS --wincompat)
+      else (WIN32)
+        FLEX_TARGET (H5LT_SCANNER H5LTanalyze.l ${CMAKE_CURRENT_BINARY_DIR}/H5LTanalyze.c)
+      endif (WIN32)
+      ADD_FLEX_BISON_DEPENDENCY(H5LT_SCANNER H5LT_PARSER)
+
+      if (BISON_H5LT_PARSER_DEFINED AND FLEX_H5LT_SCANNER_DEFINED)
+        set_source_files_properties (${FLEX_H5LT_SCANNER_OUTPUTS}
+            PROPERTIES OBJECT_DEPENDS ${BISON_H5LT_PARSER_OUTPUTS})
+        set (HL_SRCS
+            ${BISON_H5LT_PARSER_OUTPUTS}
+            ${FLEX_H5LT_SCANNER_OUTPUTS}
+        )
+        include_directories(${CMAKE_CURRENT_BINARY_DIR})
+      else (BISON_H5LT_PARSER_DEFINED AND FLEX_H5LT_SCANNER_DEFINED)
+        message (STATUS "Error during generate of files")
+      endif (BISON_H5LT_PARSER_DEFINED AND FLEX_H5LT_SCANNER_DEFINED)
+    else (FLEX_FOUND)
+      message (STATUS "Cannot generate files - flex not found")
+    endif (FLEX_FOUND)
+  else (BISON_FOUND)
+    message (STATUS "Cannot generate files - bison not found")
+  endif (BISON_FOUND)
+endmacro (H5_GEN_FLEX_FILES)
diff --git a/config/cmake/cacheinit.cmake b/config/cmake/cacheinit.cmake
index 4bef99f..e4ba880 100644
--- a/config/cmake/cacheinit.cmake
+++ b/config/cmake/cacheinit.cmake
@@ -8,6 +8,8 @@ set (CMAKE_INSTALL_FRAMEWORK_PREFIX "Library/Frameworks" CACHE STRING "Framework
 
 set (HDF_PACKAGE_EXT "" CACHE STRING "Name of HDF package extension" FORCE)
 
+set (HDF5_GENERATE_HEADERS ON CACHE BOOL "Rebuild Generated Files" FORCE)
+
 set (HDF5_BUILD_FORTRAN ON CACHE BOOL "Build FORTRAN support" FORCE)
 
 set (HDF5_BUILD_GENERATORS OFF CACHE BOOL "Build Test Generators" FORCE)
diff --git a/config/cmake/mccacheinit.cmake b/config/cmake/mccacheinit.cmake
index 39ec124..7f981df 100644
--- a/config/cmake/mccacheinit.cmake
+++ b/config/cmake/mccacheinit.cmake
@@ -4,12 +4,16 @@
 # EXTERNAL cache entries
 ########################
 
+set (CMAKE_INSTALL_FRAMEWORK_PREFIX "Library/Frameworks" CACHE STRING "Frameworks installation directory" FORCE)
+
 set (BUILD_SHARED_LIBS OFF CACHE BOOL "Build Shared Libraries" FORCE)
 
 set (BUILD_TESTING ON CACHE BOOL "Build HDF5 Unit Testing" FORCE)
 
 set (HDF_PACKAGE_EXT "" CACHE STRING "Name of HDF package extension" FORCE)
 
+set (HDF5_GENERATE_HEADERS ON CACHE BOOL "Rebuild Generated Files" FORCE)
+
 set (HDF5_BUILD_CPP_LIB ON CACHE BOOL "Build HDF5 C++ Library" FORCE)
 
 set (HDF5_BUILD_EXAMPLES ON CACHE BOOL "Build HDF5 Library Examples" FORCE)
diff --git a/config/lt_vers.am b/config/lt_vers.am
index 21395cf..36de8fe 100644
--- a/config/lt_vers.am
+++ b/config/lt_vers.am
@@ -19,7 +19,7 @@
 # After making changes, run bin/reconfigure to update other configure related
 # files like Makefile.in.
 LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 221
+LT_VERS_REVISION = 222
 LT_VERS_AGE = 0
 
 ## If the API changes *at all*, increment LT_VERS_INTERFACE and
diff --git a/configure b/configure
index 2d78418..f859269 100755
--- a/configure
+++ b/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 # From configure.ac Id: configure.ac 22697 2012-08-19 14:35:47Z hdftest .
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for HDF5 1.9.231.
+# Generated by GNU Autoconf 2.69 for HDF5 1.9.232.
 #
 # Report bugs to <help@hdfgroup.org>.
 #
@@ -591,8 +591,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='HDF5'
 PACKAGE_TARNAME='hdf5'
-PACKAGE_VERSION='1.9.231'
-PACKAGE_STRING='HDF5 1.9.231'
+PACKAGE_VERSION='1.9.232'
+PACKAGE_STRING='HDF5 1.9.232'
 PACKAGE_BUGREPORT='help@hdfgroup.org'
 PACKAGE_URL=''
 
@@ -678,10 +678,10 @@ BUILD_SHARED_SZIP_CONDITIONAL_TRUE
 LL_PATH
 USE_FILTER_SZIP
 USE_FILTER_DEFLATE
-AM_MAKEFLAGS
 LT_STATIC_EXEC
 USE_PLUGINS_CONDITIONAL_FALSE
 USE_PLUGINS_CONDITIONAL_TRUE
+LT_SYS_LIBRARY_PATH
 OTOOL64
 OTOOL
 LIPO
@@ -894,6 +894,7 @@ enable_shared
 enable_static
 with_pic
 enable_fast_install
+with_aix_soname
 with_gnu_ld
 with_sysroot
 enable_libtool_lock
@@ -939,7 +940,8 @@ FCFLAGS
 CXX
 CXXFLAGS
 CCC
-CXXCPP'
+CXXCPP
+LT_SYS_LIBRARY_PATH'
 
 
 # Initialize some variables set by options.
@@ -1480,7 +1482,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures HDF5 1.9.231 to adapt to many kinds of systems.
+\`configure' configures HDF5 1.9.232 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1550,7 +1552,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of HDF5 1.9.231:";;
+     short | recursive ) echo "Configuration of HDF5 1.9.232:";;
    esac
   cat <<\_ACEOF
 
@@ -1560,8 +1562,8 @@ Optional Features:
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-silent-rules   less verbose build output (undo: "make V=1")
   --disable-silent-rules  verbose build output (undo: "make V=0")
-  --enable-maintainer-mode
-                          enable make rules and dependencies not useful (and
+  --disable-maintainer-mode
+                          disable make rules and dependencies not useful (and
                           sometimes confusing) to the casual installer
   --enable-dependency-tracking
                           do not reject slow dependency extractors
@@ -1630,9 +1632,12 @@ Optional Packages:
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
   --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
                           both]
+  --with-aix-soname=aix|svr4|both
+                          shared library versioning (aka "SONAME") variant to
+                          provide on AIX, [default=aix].
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-  --with-sysroot=DIR Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).
+  --with-sysroot[=DIR]    Search for dependent libraries within DIR (or the
+                          compiler's sysroot if not specified).
 
  For the following --with-xxx options, you can specify where the header
  files and libraries are in two different ways:
@@ -1671,6 +1676,8 @@ Some influential environment variables:
   CXX         C++ compiler command
   CXXFLAGS    C++ compiler flags
   CXXCPP      C++ preprocessor
+  LT_SYS_LIBRARY_PATH
+              User-defined run-time library search path.
 
 Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
@@ -1738,7 +1745,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-HDF5 configure 1.9.231
+HDF5 configure 1.9.232
 generated by GNU Autoconf 2.69
 
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2653,7 +2660,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by HDF5 $as_me 1.9.231, which was
+It was created by HDF5 $as_me 1.9.232, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
@@ -3039,7 +3046,7 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 
 ## AM_INIT_AUTOMAKE takes a list of options that should be applied to
 ## every Makefile.am when automake is run.
-am__api_version='1.14'
+am__api_version='1.15'
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -3211,8 +3218,8 @@ test "$program_suffix" != NONE &&
 ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
 program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
 
 if test x"${MISSING+set}" != xset; then
   case $am_aux_dir in
@@ -3231,7 +3238,7 @@ else
 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -3525,7 +3532,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='hdf5'
- VERSION='1.9.231'
+ VERSION='1.9.232'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -3559,8 +3566,8 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
 mkdir_p='$(MKDIR_P)'
 
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
 # Always define AMTAR for backward compatibility.  Yes, it's still used
 # in the wild :-(  We should find a proper way to deprecate it ...
 AMTAR='$${TAR-tar}'
@@ -3617,6 +3624,7 @@ END
     as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
   fi
 fi
+
 # Check whether --enable-silent-rules was given.
 if test "${enable_silent_rules+set}" = set; then :
   enableval=$enable_silent_rules;
@@ -3658,15 +3666,16 @@ AM_BACKSLASH='\'
 
 
 ## AM_MAINTAINER_MODE turns off "rebuild rules" that contain dependencies
-## for Makefiles, configure, src/H5config.h, etc.  If AM_MAINTAINER_MODE
-## is *not* included here, these files will be rebuilt if out of date.
-## This is a problem because if users try to build on a machine with
+## for Makefiles, configure, src/H5config.h, etc. If AM_MAINTAINER_MODE
+## is enabled, these files will be rebuilt if out of date. This is a
+## problem because if users try to build on a machine with
 ## the wrong versions of autoconf and automake, these files will be
 ## rebuilt with the wrong versions and bad things can happen.
 ## Also, CVS doesn't preserve dependencies between timestamps, so
 ## Makefiles will often think rebuilding needs to occur when it doesn't.
-## Developers should './configure --enable-maintainer-mode' to turn on
-## rebuild rules.
+##
+## By default, it is enabled. Users can configure with
+## --disable-maintainer-mode to prevent running the autotools.
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
@@ -3674,7 +3683,7 @@ $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles
 if test "${enable_maintainer_mode+set}" = set; then :
   enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
 else
-  USE_MAINTAINER_MODE=no
+  USE_MAINTAINER_MODE=yes
 fi
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
@@ -9492,8 +9501,8 @@ esac
 
 
 
-macro_version='2.4.2'
-macro_revision='1.3337'
+macro_version='2.4.6'
+macro_revision='2.4.6'
 
 
 
@@ -9507,7 +9516,7 @@ macro_revision='1.3337'
 
 
 
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 
 # Backslashify metacharacters that are still active within
 # double-quoted strings.
@@ -9556,7 +9565,7 @@ func_echo_all ()
     $ECHO ""
 }
 
-case "$ECHO" in
+case $ECHO in
   printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
 $as_echo "printf" >&6; } ;;
   print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
@@ -9749,19 +9758,19 @@ test -z "$GREP" && GREP=grep
 
 # Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
 else
   with_gnu_ld=no
 fi
 
 ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   # Check if gcc -print-prog-name=ld gives a path.
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
 $as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
+    # gcc leaves a trailing carriage return, which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -9775,7 +9784,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
-      test -z "$LD" && LD="$ac_prog"
+      test -z "$LD" && LD=$ac_prog
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
@@ -9786,7 +9795,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
     with_gnu_ld=unknown
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
 $as_echo_n "checking for GNU ld... " >&6; }
 else
@@ -9797,32 +9806,32 @@ if ${lt_cv_path_LD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD=$ac_dir/$ac_prog
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
+	test no != "$with_gnu_ld" && break
 	;;
       *)
-	test "$with_gnu_ld" != yes && break
+	test yes != "$with_gnu_ld" && break
 	;;
       esac
     fi
   done
-  IFS="$lt_save_ifs"
+  IFS=$lt_save_ifs
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
 fi
 fi
 
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
 if test -n "$LD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
 $as_echo "$LD" >&6; }
@@ -9865,33 +9874,38 @@ if ${lt_cv_path_NM+:} false; then :
 else
   if test -n "$NM"; then
   # Let the user override the test.
-  lt_cv_path_NM="$NM"
+  lt_cv_path_NM=$NM
 else
-  lt_nm_to_check="${ac_tool_prefix}nm"
+  lt_nm_to_check=${ac_tool_prefix}nm
   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
     lt_nm_to_check="$lt_nm_to_check nm"
   fi
   for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
     for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
 	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
 	#   nm: unknown option "B" ignored
 	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
-	  break
+	  break 2
 	  ;;
 	*)
 	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
-	    break
+	    break 2
 	    ;;
 	  *)
 	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -9902,15 +9916,15 @@ else
 	esac
       fi
     done
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
   done
   : ${lt_cv_path_NM=no}
 fi
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
   if test -n "$DUMPBIN"; then :
@@ -10016,9 +10030,9 @@ esac
   fi
 fi
 
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
     *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
+      DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
     *)
       DUMPBIN=:
@@ -10026,8 +10040,8 @@ fi
     esac
   fi
 
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
   fi
 fi
 test -z "$NM" && NM=nm
@@ -10055,7 +10069,7 @@ else
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
   fi
-  rm -f conftest*
+  rm -rf conftest*
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
 $as_echo "$lt_cv_nm_interface" >&6; }
@@ -10078,7 +10092,7 @@ if ${lt_cv_sys_max_cmd_len+:} false; then :
   $as_echo_n "(cached) " >&6
 else
     i=0
-  teststring="ABCD"
+  teststring=ABCD
 
   case $build_os in
   msdosdjgpp*)
@@ -10118,7 +10132,7 @@ else
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -10168,22 +10182,23 @@ else
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
       # Make teststring a little bigger before we do anything with it.
       # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
+      for i in 1 2 3 4 5 6 7 8; do
         teststring=$teststring$teststring
       done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
 	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
+	      test 17 != "$i" # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
@@ -10201,7 +10216,7 @@ else
 
 fi
 
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
 $as_echo "$lt_cv_sys_max_cmd_len" >&6; }
 else
@@ -10219,30 +10234,6 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   lt_unset=unset
 else
@@ -10365,13 +10356,13 @@ esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       reload_cmds=false
     fi
     ;;
   darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
     else
       reload_cmds='$LD$reload_flag -o $output$reload_objs'
     fi
@@ -10499,13 +10490,13 @@ lt_cv_deplibs_check_method='unknown'
 # Need to set the preceding variable on all platforms that support
 # interlibrary dependencies.
 # 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
 # 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
 
 case $host_os in
 aix[4-9]*)
@@ -10532,8 +10523,7 @@ mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
@@ -10569,10 +10559,6 @@ freebsd* | dragonfly*)
   fi
   ;;
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 haiku*)
   lt_cv_deplibs_check_method=pass_all
   ;;
@@ -10611,7 +10597,7 @@ irix5* | irix6* | nonstopux*)
   ;;
 
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -10633,8 +10619,8 @@ newos6*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -10687,6 +10673,9 @@ sysv4 | sysv4.3*)
 tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 esac
 
 fi
@@ -10844,8 +10833,8 @@ else
 
 case $host_os in
 cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
   case `$DLLTOOL --help 2>&1` in
   *--identify-strict*)
     lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -10857,7 +10846,7 @@ cygwin* | mingw* | pw32* | cegcc*)
   ;;
 *)
   # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
   ;;
 esac
 
@@ -11019,7 +11008,7 @@ if ac_fn_c_try_compile "$LINENO"; then :
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-      if test "$ac_status" -eq 0; then
+      if test 0 -eq "$ac_status"; then
 	# Ensure the archiver fails upon bogus file names.
 	rm -f conftest.$ac_objext libconftest.a
 	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
@@ -11027,7 +11016,7 @@ if ac_fn_c_try_compile "$LINENO"; then :
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-	if test "$ac_status" -ne 0; then
+	if test 0 -ne "$ac_status"; then
           lt_cv_ar_at_file=@
         fi
       fi
@@ -11040,7 +11029,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
 $as_echo "$lt_cv_ar_at_file" >&6; }
 
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
   archiver_list_spec=
 else
   archiver_list_spec=$lt_cv_ar_at_file
@@ -11257,7 +11246,7 @@ old_postuninstall_cmds=
 
 if test -n "$RANLIB"; then
   case $host_os in
-  openbsd*)
+  bitrig* | openbsd*)
     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
@@ -11347,7 +11336,7 @@ cygwin* | mingw* | pw32* | cegcc*)
   symcode='[ABCDGISTW]'
   ;;
 hpux*)
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     symcode='[ABCDEGRST]'
   fi
   ;;
@@ -11380,14 +11369,44 @@ case `$NM -V 2>&1` in
   symcode='[ABCDGIRSTW]' ;;
 esac
 
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -11405,21 +11424,24 @@ for ac_symprfx in "" "_"; do
 
   # Write the raw and C identifiers.
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
     # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
 "     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
 "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
 "     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
 "     ' prfx=^$ac_symprfx"
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -11429,7 +11451,7 @@ for ac_symprfx in "" "_"; do
   # Check to see that the pipe works correctly.
   pipe_works=no
 
-  rm -f conftest*
+  rm -rf conftest*
   cat > conftest.$ac_ext <<_LT_EOF
 #ifdef __cplusplus
 extern "C" {
@@ -11467,11 +11489,11 @@ _LT_EOF
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
 /* This system does not cope well with relocations in const data.  */
 # define LT_DLSYM_CONST
 #else
@@ -11497,7 +11519,7 @@ lt__PROGRAM__LTX_preloaded_symbols[] =
 {
   { "@PROGRAM@", (void *) 0 },
 _LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
 	  cat <<\_LT_EOF >> conftest.$ac_ext
   {0, (void *) 0}
 };
@@ -11517,13 +11539,13 @@ _LT_EOF
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_globsym_save_LIBS=$LIBS
 	  lt_globsym_save_CFLAGS=$CFLAGS
-	  LIBS="conftstm.$ac_objext"
+	  LIBS=conftstm.$ac_objext
 	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
 	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+  test $ac_status = 0; } && test -s conftest$ac_exeext; then
 	    pipe_works=yes
 	  fi
 	  LIBS=$lt_globsym_save_LIBS
@@ -11544,7 +11566,7 @@ _LT_EOF
   rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
+  if test yes = "$pipe_works"; then
     break
   else
     lt_cv_sys_global_symbol_pipe=
@@ -11597,6 +11619,16 @@ fi
 
 
 
+
+
+
+
+
+
+
+
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
 $as_echo_n "checking for sysroot... " >&6; }
 
@@ -11609,9 +11641,9 @@ fi
 
 
 lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
  yes)
-   if test "$GCC" = yes; then
+   if test yes = "$GCC"; then
      lt_sysroot=`$CC --print-sysroot 2>/dev/null`
    fi
    ;; #(
@@ -11621,8 +11653,8 @@ case ${with_sysroot} in #(
  no|'')
    ;; #(
  *)
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
    as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
    ;;
 esac
@@ -11634,18 +11666,99 @@ $as_echo "${lt_sysroot:-no}" >&6; }
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+  ac_path_lt_DD_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in dd; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+      $ac_path_lt_DD_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_lt_DD"; then
+    :
+  fi
+else
+  ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
 # Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then :
   enableval=$enable_libtool_lock;
 fi
 
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
 case $host in
 ia64-*-hpux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -11654,24 +11767,25 @@ ia64-*-hpux*)
   test $ac_status = 0; }; then
     case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
-	HPUX_IA64_MODE="32"
+	HPUX_IA64_MODE=32
 	;;
       *ELF-64*)
-	HPUX_IA64_MODE="64"
+	HPUX_IA64_MODE=64
 	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo '#line '$LINENO' "configure"' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
       case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
@@ -11700,9 +11814,50 @@ ia64-*-hpux*)
   rm -rf conftest*
   ;;
 
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    emul=elf
+    case `/usr/bin/file conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -11716,9 +11871,19 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
 	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
+	  powerpc64le-*linux*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*linux*)
 	    LD="${LD-ld} -m elf32ppclinux"
 	    ;;
 	  s390x-*linux*)
@@ -11737,7 +11902,10 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 	  x86_64-*linux*)
 	    LD="${LD-ld} -m elf_x86_64"
 	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
+	  powerpcle-*linux*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*linux*)
 	    LD="${LD-ld} -m elf64ppc"
 	    ;;
 	  s390*-*linux*|s390*-*tpf*)
@@ -11755,7 +11923,7 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
+  SAVE_CFLAGS=$CFLAGS
   CFLAGS="$CFLAGS -belf"
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
 $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
@@ -11803,13 +11971,14 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
 $as_echo "$lt_cv_cc_needs_belf" >&6; }
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+  if test yes != "$lt_cv_cc_needs_belf"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
+    CFLAGS=$SAVE_CFLAGS
   fi
   ;;
 *-*solaris*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -11821,7 +11990,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
       case $lt_cv_prog_gnu_ld in
       yes*)
         case $host in
-        i?86-*-solaris*)
+        i?86-*-solaris*|x86_64-*-solaris*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
         sparc*-*-solaris*)
@@ -11830,7 +11999,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
         esac
         # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
         if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
+          LD=${LD-ld}_sol2
         fi
         ;;
       *)
@@ -11846,7 +12015,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
   ;;
 esac
 
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
 
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
@@ -11953,11 +12122,11 @@ else
   if $GREP 'Manifest Tool' conftest.out > /dev/null; then
     lt_cv_path_mainfest_tool=yes
   fi
-  rm -f conftest*
+  rm -rf conftest*
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
 $as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
   MANIFEST_TOOL=:
 fi
 
@@ -12460,7 +12629,7 @@ if ${lt_cv_apple_cc_single_mod+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
+      if test -z "$LT_MULTI_MODULE"; then
 	# By default we will add the -single_module flag. You can override
 	# by either setting the environment variable LT_MULTI_MODULE
 	# non-empty at configure time, or by adding -multi_module to the
@@ -12478,7 +12647,7 @@ else
 	  cat conftest.err >&5
 	# Otherwise, if the output was created with a 0 exit code from
 	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&5
@@ -12525,7 +12694,7 @@ else
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-	LDFLAGS="$save_LDFLAGS"
+	LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
@@ -12554,7 +12723,7 @@ _LT_EOF
       _lt_result=$?
       if test -s conftest.err && $GREP force_load conftest.err; then
 	cat conftest.err >&5
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
 	lt_cv_ld_force_load=yes
       else
 	cat conftest.err >&5
@@ -12567,32 +12736,32 @@ fi
 $as_echo "$lt_cv_ld_force_load" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
     darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
 	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[012]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[012][,.]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
 	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
       _lt_dar_single_mod='$single_module'
     fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
     else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -12600,6 +12769,41 @@ $as_echo "$lt_cv_ld_force_load" >&6; }
     ;;
   esac
 
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
 for ac_header in dlfcn.h
 do :
   ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
@@ -12617,9 +12821,9 @@ done
 
 func_stripname_cnf ()
 {
-  case ${2} in
-  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  case $2 in
+  .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;;
   esac
 } # func_stripname_cnf
 
@@ -12645,14 +12849,14 @@ if test "${enable_shared+set}" = set; then :
     *)
       enable_shared=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_shared=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -12676,14 +12880,14 @@ if test "${enable_static+set}" = set; then :
     *)
      enable_static=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_static=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -12707,14 +12911,14 @@ if test "${with_pic+set}" = set; then :
     *)
       pic_mode=default
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for lt_pkg in $withval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$lt_pkg" = "X$lt_p"; then
 	  pic_mode=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -12722,8 +12926,6 @@ else
 fi
 
 
-test -z "$pic_mode" && pic_mode=default
-
 
 
 
@@ -12739,14 +12941,14 @@ if test "${enable_fast_install+set}" = set; then :
     *)
       enable_fast_install=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_fast_install=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -12760,11 +12962,63 @@ fi
 
 
 
+  shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+  withval=$with_aix_soname; case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname
+else
+  if ${lt_cv_with_aix_soname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_with_aix_soname=aix
+fi
+
+    with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+
+
+
+
+
+
 
 
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -12813,7 +13067,7 @@ test -z "$LN_S" && LN_S="ln -s"
 
 
 
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
@@ -12852,7 +13106,7 @@ aix3*)
   # AIX sometimes has problems with the GCC collect2 program.  For some
   # reason, if we set the COLLECT_NAMES environment variable, the problems
   # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
+  if test set != "${COLLECT_NAMES+set}"; then
     COLLECT_NAMES=
     export COLLECT_NAMES
   fi
@@ -12863,14 +13117,14 @@ esac
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
 
 # Set sane defaults for various variables
 test -z "$CC" && CC=cc
@@ -12879,15 +13133,8 @@ test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
 test -z "$LD" && LD=ld
 test -z "$ac_objext" && ac_objext=o
 
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
 
 
 # Only perform the check for file, if the check method requires it
@@ -12902,22 +13149,22 @@ if ${lt_cv_path_MAGIC_CMD+:} false; then :
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+    if test -f "$ac_dir/${ac_tool_prefix}file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -12940,13 +13187,13 @@ _LT_EOF
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac
 fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
@@ -12968,22 +13215,22 @@ if ${lt_cv_path_MAGIC_CMD+:} false; then :
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+    if test -f "$ac_dir/file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"file"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -13006,13 +13253,13 @@ _LT_EOF
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac
 fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
@@ -13033,7 +13280,7 @@ esac
 
 # Use C for the default configuration in the libtool script
 
-lt_save_CC="$CC"
+lt_save_CC=$CC
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -13078,7 +13325,7 @@ ac_outfile=conftest.$ac_objext
 echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
+$RM -r conftest*
 
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
@@ -13087,11 +13334,15 @@ _lt_linker_boilerplate=`cat conftest.err`
 $RM -r conftest*
 
 
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
 if test -n "$compiler"; then
 
 lt_prog_compiler_no_builtin_flag=
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $cc_basename in
   nvcc*)
     lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
@@ -13107,7 +13358,7 @@ else
   lt_cv_prog_compiler_rtti_exceptions=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   lt_compiler_flag="-fno-rtti -fno-exceptions"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -13131,13 +13382,13 @@ else
        lt_cv_prog_compiler_rtti_exceptions=yes
      fi
    fi
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
 else
     :
@@ -13155,17 +13406,18 @@ lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
 
-  if test "$GCC" = yes; then
+  if test yes = "$GCC"; then
     lt_prog_compiler_wl='-Wl,'
     lt_prog_compiler_static='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static='-Bstatic'
       fi
+      lt_prog_compiler_pic='-fPIC'
       ;;
 
     amigaos*)
@@ -13176,8 +13428,8 @@ lt_prog_compiler_static=
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -13193,6 +13445,11 @@ lt_prog_compiler_static=
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -13263,7 +13520,7 @@ lt_prog_compiler_static=
     case $host_os in
     aix*)
       lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static='-Bstatic'
       else
@@ -13271,10 +13528,29 @@ lt_prog_compiler_static=
       fi
       ;;
 
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        lt_prog_compiler_wl='-Wl,-Wl,,'
+        lt_prog_compiler_pic='-PIC'
+        lt_prog_compiler_static='-Bstatic'
+        ;;
+      esac
+      ;;
+
     mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -13290,7 +13566,7 @@ lt_prog_compiler_static=
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      lt_prog_compiler_static='$wl-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
@@ -13299,9 +13575,9 @@ lt_prog_compiler_static=
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
       case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
+      # old Intel for x86_64, which still supported -KPIC.
       ecc*)
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-KPIC'
@@ -13326,6 +13602,12 @@ lt_prog_compiler_static=
 	lt_prog_compiler_pic='-PIC'
 	lt_prog_compiler_static='-Bstatic'
 	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -13423,7 +13705,7 @@ lt_prog_compiler_static=
       ;;
 
     sysv4*MP*)
-      if test -d /usr/nec ;then
+      if test -d /usr/nec; then
 	lt_prog_compiler_pic='-Kconform_pic'
 	lt_prog_compiler_static='-Bstatic'
       fi
@@ -13452,7 +13734,7 @@ lt_prog_compiler_static=
   fi
 
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic=
     ;;
@@ -13484,7 +13766,7 @@ else
   lt_cv_prog_compiler_pic_works=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -13508,13 +13790,13 @@ else
        lt_cv_prog_compiler_pic_works=yes
      fi
    fi
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
     case $lt_prog_compiler_pic in
      "" | " "*) ;;
      *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -13546,7 +13828,7 @@ if ${lt_cv_prog_compiler_static_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -13565,13 +13847,13 @@ else
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
 $as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
     :
 else
     lt_prog_compiler_static=
@@ -13620,14 +13902,14 @@ else
      fi
    fi
    chmod u+w . 2>&5
-   $RM conftest*
+   $RM -r conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
    $RM out/* && rmdir out
    cd ..
    $RM -r conftest
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
@@ -13675,14 +13957,14 @@ else
      fi
    fi
    chmod u+w . 2>&5
-   $RM conftest*
+   $RM -r conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
    $RM out/* && rmdir out
    cd ..
    $RM -r conftest
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
@@ -13691,22 +13973,22 @@ $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
   hard_links=yes
-  $RM conftest*
+  $RM -r conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 $as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
@@ -13749,9 +14031,9 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
   # included in the symbol list
   include_expsyms=
   # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
   exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
@@ -13766,7 +14048,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
@@ -13774,7 +14056,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
     # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
-  openbsd*)
+  openbsd* | bitrig*)
     with_gnu_ld=no
     ;;
   esac
@@ -13784,7 +14066,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
   # On some targets, GNU ld is compatible enough with the native linker
   # that we're better off using the native interface for both.
   lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     case $host_os in
       aix*)
 	# The AIX port of GNU ld has always aspired to compatibility
@@ -13806,24 +14088,24 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
     esac
   fi
 
-  if test "$lt_use_gnu_ld_interface" = yes; then
+  if test yes = "$lt_use_gnu_ld_interface"; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+    wlarc='$wl'
 
     # Set some defaults for GNU ld with shared library support. These
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
+    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+    export_dynamic_flag_spec='$wl--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
     else
       whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>&1` in
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -13836,7 +14118,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
     case $host_os in
     aix[3-9]*)
       # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
+      if test ia64 != "$host_cpu"; then
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
@@ -13855,7 +14137,7 @@ _LT_EOF
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds=''
         ;;
       m68k)
@@ -13871,7 +14153,7 @@ _LT_EOF
 	allow_undefined_flag=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -13881,7 +14163,7 @@ _LT_EOF
       # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
-      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      export_dynamic_flag_spec='$wl--export-all-symbols'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
@@ -13889,61 +14171,89 @@ _LT_EOF
       exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
 	ld_shlibs=no
       fi
       ;;
 
     haiku*)
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       link_all_deplibs=yes
       ;;
 
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
     interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
+      hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+      export_dynamic_flag_spec='$wl-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
+      if test linux-dietlibc = "$host_os"; then
 	case $cc_basename in
 	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
 	esac
       fi
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
+	 && test no = "$tmp_diet"
       then
 	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95* | pgfortran*)
 					# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -13954,42 +14264,47 @@ _LT_EOF
 	lf95*)				# Lahey Fortran 8.1
 	  whole_archive_flag_spec=
 	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
 	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
 	nvcc*)	# Cuda Compiler Driver 2.2
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
 	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
 	esac
-	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 
-        if test "x$supports_anon_versioning" = xyes; then
+        if test yes = "$supports_anon_versioning"; then
           archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
+	tcc*)
+	  export_dynamic_flag_spec='-rdynamic'
+	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
 	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
+	  if test yes = "$supports_anon_versioning"; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -14003,8 +14318,8 @@ _LT_EOF
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -14022,8 +14337,8 @@ _LT_EOF
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -14035,7 +14350,7 @@ _LT_EOF
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
 *** reliably create shared libraries on SCO systems.  Therefore, libtool
 *** is disabling shared libraries support.  We urge you to upgrade GNU
 *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
@@ -14050,9 +14365,9 @@ _LT_EOF
 	  # DT_RUNPATH tag from executables and libraries.  But doing so
 	  # requires that you compile everything twice, which is a pain.
 	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    ld_shlibs=no
 	  fi
@@ -14069,15 +14384,15 @@ _LT_EOF
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
       ;;
     esac
 
-    if test "$ld_shlibs" = no; then
+    if test no = "$ld_shlibs"; then
       runpath_var=
       hardcode_libdir_flag_spec=
       export_dynamic_flag_spec=
@@ -14093,7 +14408,7 @@ _LT_EOF
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct=unsupported
@@ -14101,34 +14416,57 @@ _LT_EOF
       ;;
 
     aix[4-9]*)
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
 	aix_use_runtimelinking=no
 	exp_sym_flag='-Bexport'
-	no_entry_flag=""
+	no_entry_flag=
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
 	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
 	    aix_use_runtimelinking=yes
 	    break
 	  fi
 	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
 	  ;;
 	esac
 
@@ -14147,13 +14485,21 @@ _LT_EOF
       hardcode_direct_absolute=yes
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
-      file_list_spec='${wl}-f,'
+      file_list_spec='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	hardcode_direct=no
+	hardcode_direct_absolute=no
+	;;
+      esac
 
-      if test "$GCC" = yes; then
+      if test yes = "$GCC"; then
 	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -14172,35 +14518,42 @@ _LT_EOF
 	  ;;
 	esac
 	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
 	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
       else
 	# not using gcc
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
 	  else
-	    shared_flag='${wl}-bM:SRE'
+	    shared_flag='$wl-bM:SRE'
 	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
 	fi
       fi
 
-      export_dynamic_flag_spec='${wl}-bexpall'
+      export_dynamic_flag_spec='$wl-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       always_export_symbols=yes
-      if test "$aix_use_runtimelinking" = yes; then
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	allow_undefined_flag='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        if test "${lt_cv_aix_libpath+set}" = set; then
+        if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath_+:} false; then :
@@ -14243,7 +14596,7 @@ fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
+    lt_cv_aix_libpath_=/usr/lib:/lib
   fi
 
 fi
@@ -14251,17 +14604,17 @@ fi
   aix_libpath=$lt_cv_aix_libpath_
 fi
 
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	if test ia64 = "$host_cpu"; then
+	  hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 if test "${lt_cv_aix_libpath+set}" = set; then
+	 if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath_+:} false; then :
@@ -14304,7 +14657,7 @@ fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
+    lt_cv_aix_libpath_=/usr/lib:/lib
   fi
 
 fi
@@ -14312,21 +14665,33 @@ fi
   aix_libpath=$lt_cv_aix_libpath_
 fi
 
-	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag=' ${wl}-bernotok'
-	  allow_undefined_flag=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
+	  no_undefined_flag=' $wl-bernotok'
+	  allow_undefined_flag=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
 	    # We only use this code for GNU lds that support --whole-archive.
-	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
 	  else
 	    # Exported symbols can be pulled into shared objects from archives
 	    whole_archive_flag_spec='$convenience'
 	  fi
 	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
 	fi
       fi
       ;;
@@ -14335,7 +14700,7 @@ fi
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds=''
         ;;
       m68k)
@@ -14365,16 +14730,17 @@ fi
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
-	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
 	# The linker will not automatically build a static lib if we build a DLL.
 	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
 	enable_shared_with_static_runtimes=yes
@@ -14383,18 +14749,18 @@ fi
 	# Don't use ranlib
 	old_postinstall_cmds='chmod 644 $oldlib'
 	postlink_cmds='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
 	;;
       *)
 	# Assume MSVC wrapper
@@ -14403,7 +14769,7 @@ fi
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
 	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
 	# The linker will automatically build a .lib file if we build a DLL.
@@ -14422,24 +14788,24 @@ fi
   hardcode_direct=no
   hardcode_automatic=yes
   hardcode_shlibpath_var=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
 
   else
     whole_archive_flag_spec=''
   fi
   link_all_deplibs=yes
-  allow_undefined_flag="$_lt_dar_allow_undefined"
+  allow_undefined_flag=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
 
   else
   ld_shlibs=no
@@ -14481,33 +14847,33 @@ fi
       ;;
 
     hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      if test yes = "$GCC"; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       else
-	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl+b $wl$libdir'
       hardcode_libdir_separator=:
       hardcode_direct=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
       hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
+      export_dynamic_flag_spec='$wl-E'
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
 	hardcode_libdir_separator=:
 	hardcode_direct=yes
 	hardcode_direct_absolute=yes
-	export_dynamic_flag_spec='${wl}-E'
+	export_dynamic_flag_spec='$wl-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	hardcode_minus_L=yes
@@ -14515,25 +14881,25 @@ fi
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test yes,no = "$GCC,$with_gnu_ld"; then
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 
@@ -14545,7 +14911,7 @@ if ${lt_cv_prog_compiler__b+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler__b=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS -b"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -14564,14 +14930,14 @@ else
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
 $as_echo "$lt_cv_prog_compiler__b" >&6; }
 
-if test x"$lt_cv_prog_compiler__b" = xyes; then
-    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+if test yes = "$lt_cv_prog_compiler__b"; then
+    archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 else
     archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
 fi
@@ -14579,8 +14945,8 @@ fi
 	  ;;
 	esac
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
 	hardcode_libdir_separator=:
 
 	case $host_cpu in
@@ -14591,7 +14957,7 @@ fi
 	*)
 	  hardcode_direct=yes
 	  hardcode_direct_absolute=yes
-	  export_dynamic_flag_spec='${wl}-E'
+	  export_dynamic_flag_spec='$wl-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
@@ -14602,8 +14968,8 @@ fi
       ;;
 
     irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
@@ -14613,8 +14979,8 @@ $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >
 if ${lt_cv_irix_exported_symbol+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+  save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
 	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 int foo (void) { return 0; }
@@ -14626,24 +14992,34 @@ else
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-           LDFLAGS="$save_LDFLAGS"
+           LDFLAGS=$save_LDFLAGS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
 $as_echo "$lt_cv_irix_exported_symbol" >&6; }
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
 	fi
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
       fi
       archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       inherit_rpath=yes
       link_all_deplibs=yes
       ;;
 
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	ld_shlibs=yes
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
     netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
@@ -14658,7 +15034,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
     newsos6)
       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       hardcode_shlibpath_var=no
       ;;
@@ -14666,27 +15042,19 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
     *nto* | *qnx*)
       ;;
 
-    openbsd*)
+    openbsd* | bitrig*)
       if test -f /usr/libexec/ld.so; then
 	hardcode_direct=yes
 	hardcode_shlibpath_var=no
 	hardcode_direct_absolute=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
 	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec='${wl}-E'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	  export_dynamic_flag_spec='$wl-E'
 	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	     ;;
-	  esac
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
 	fi
       else
 	ld_shlibs=no
@@ -14697,33 +15065,53 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
       ;;
 
     osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
       fi
       archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -14734,24 +15122,24 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
 
     solaris*)
       no_undefined_flag=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
 	  wlarc=''
-	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
 	  ;;
 	*)
-	  wlarc='${wl}'
-	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  wlarc='$wl'
+	  archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
 	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
 	  ;;
 	esac
       fi
@@ -14761,11 +15149,11 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       solaris2.[0-5] | solaris2.[0-5].*) ;;
       *)
 	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
 	# but is careful enough not to reorder.
 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	if test yes = "$GCC"; then
+	  whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 	else
 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
 	fi
@@ -14775,10 +15163,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       ;;
 
     sunos4*)
-      if test "x$host_vendor" = xsequent; then
+      if test sequent = "$host_vendor"; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
@@ -14827,43 +15215,43 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag='${wl}-z,text'
+      no_undefined_flag='$wl-z,text'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
+      # Note: We CANNOT use -z defs as we might desire, because we do not
       # link with -lc, and that would cause any symbols used from libc to
       # always be unresolved, which means just about no library would
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      no_undefined_flag='${wl}-z,text'
-      allow_undefined_flag='${wl}-z,nodefs'
+      no_undefined_flag='$wl-z,text'
+      allow_undefined_flag='$wl-z,nodefs'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_flag_spec='$wl-R,$libdir'
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
-      export_dynamic_flag_spec='${wl}-Bexport'
+      export_dynamic_flag_spec='$wl-Bexport'
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -14878,10 +15266,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       ;;
     esac
 
-    if test x$host_vendor = xsni; then
+    if test sni = "$host_vendor"; then
       case $host in
       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	export_dynamic_flag_spec='$wl-Blargedynsym'
 	;;
       esac
     fi
@@ -14889,7 +15277,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
 $as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
 
 with_gnu_ld=$with_gnu_ld
 
@@ -14915,7 +15303,7 @@ x|xyes)
   # Assume -lc should be added
   archive_cmds_need_lc=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $archive_cmds in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -14929,7 +15317,7 @@ $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
 if ${lt_cv_archive_cmds_need_lc+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  $RM conftest*
+  $RM -r conftest*
 	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
 	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
@@ -14964,7 +15352,7 @@ else
 	else
 	  cat conftest.err 1>&5
 	fi
-	$RM conftest*
+	$RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
@@ -15130,14 +15518,14 @@ esac
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
 $as_echo_n "checking dynamic linker characteristics... " >&6; }
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
   esac
   case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
+    mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
   case $lt_search_path_spec in
@@ -15153,28 +15541,35 @@ if test "$GCC" = yes; then
     ;;
   esac
   # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
+  # and add multilib dir if necessary...
   lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
   for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
       test -d "$lt_sys_path" && \
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
   lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
   for (lt_i = NF; lt_i > 0; lt_i--) {
     if ($lt_i != "" && $lt_i != ".") {
       if ($lt_i == "..") {
         lt_count++;
       } else {
         if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
+          lt_foo = "/" $lt_i lt_foo;
         } else {
           lt_count--;
         }
@@ -15188,7 +15583,7 @@ BEGIN {RS=" "; FS="/|\n";} {
   # for these hosts.
   case $host_os in
     mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+      $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
   esac
   sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
@@ -15197,7 +15592,7 @@ fi
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -15214,14 +15609,16 @@ hardcode_into_libs=no
 # flags to be left without arguments
 need_version=unknown
 
+
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix[4-9]*)
@@ -15229,41 +15626,91 @@ aix[4-9]*)
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[01] | aix4.[01].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -15273,18 +15720,18 @@ amigaos*)
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -15292,8 +15739,8 @@ beos*)
 bsdi[45]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -15305,7 +15752,7 @@ bsdi[45]*)
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -15314,8 +15761,8 @@ cygwin* | mingw* | pw32* | cegcc*)
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -15331,17 +15778,17 @@ cygwin* | mingw* | pw32* | cegcc*)
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
 
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -15350,8 +15797,8 @@ cygwin* | mingw* | pw32* | cegcc*)
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -15378,7 +15825,7 @@ cygwin* | mingw* | pw32* | cegcc*)
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -15391,8 +15838,8 @@ cygwin* | mingw* | pw32* | cegcc*)
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -15405,7 +15852,7 @@ cygwin* | mingw* | pw32* | cegcc*)
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -15418,8 +15865,8 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -15432,8 +15879,8 @@ dgux*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -15451,12 +15898,13 @@ freebsd* | dragonfly*)
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -15481,26 +15929,15 @@ freebsd* | dragonfly*)
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -15518,14 +15955,15 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -15533,8 +15971,8 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -15543,8 +15981,8 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -15557,8 +15995,8 @@ interix[3-9]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -15569,7 +16007,7 @@ irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -15577,8 +16015,8 @@ irix5* | irix6* | nonstopux*)
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -15597,8 +16035,8 @@ irix5* | irix6* | nonstopux*)
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -15607,13 +16045,33 @@ linux*oldld* | linux*aout* | linux*coff*)
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -15665,7 +16123,12 @@ fi
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -15685,12 +16148,12 @@ netbsd*)
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -15700,7 +16163,7 @@ netbsd*)
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -15709,58 +16172,68 @@ newsos6)
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
   else
-    shlibpath_overrides_runpath=yes
+    need_version=yes
   fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -15771,8 +16244,8 @@ solaris*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -15782,11 +16255,11 @@ solaris*)
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -15794,8 +16267,8 @@ sunos4*)
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -15816,24 +16289,24 @@ sysv4 | sysv4.3*)
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -15851,7 +16324,7 @@ tpf*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -15859,8 +16332,8 @@ tpf*)
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -15870,20 +16343,35 @@ uts4*)
 esac
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 $as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
 
 
 
@@ -15980,15 +16468,15 @@ $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" ||
    test -n "$runpath_var" ||
-   test "X$hardcode_automatic" = "Xyes" ; then
+   test yes = "$hardcode_automatic"; then
 
   # We can hardcode non-existent directories.
-  if test "$hardcode_direct" != no &&
+  if test no != "$hardcode_direct" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+     test no != "$hardcode_minus_L"; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action=relink
   else
@@ -16003,12 +16491,12 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
 $as_echo "$hardcode_action" >&6; }
 
-if test "$hardcode_action" = relink ||
-   test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+   test yes = "$inherit_rpath"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -16018,7 +16506,7 @@ fi
 
 
 
-  if test "x$enable_dlopen" != xyes; then
+  if test yes != "$enable_dlopen"; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -16028,23 +16516,23 @@ else
 
   case $host_os in
   beos*)
-    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen=load_add_on
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ;;
 
   mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen=LoadLibrary
     lt_cv_dlopen_libs=
     ;;
 
   cygwin*)
-    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen=dlopen
     lt_cv_dlopen_libs=
     ;;
 
   darwin*)
-  # if libdl is installed we need to link against it
+    # if libdl is installed we need to link against it
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
 if ${ac_cv_lib_dl_dlopen+:} false; then :
@@ -16090,10 +16578,10 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
 if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
 else
 
-    lt_cv_dlopen="dyld"
+    lt_cv_dlopen=dyld
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
 
@@ -16101,10 +16589,18 @@ fi
 
     ;;
 
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
   *)
     ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
 if test "x$ac_cv_func_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load"
+  lt_cv_dlopen=shl_load
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
 $as_echo_n "checking for shl_load in -ldld... " >&6; }
@@ -16151,11 +16647,11 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
 $as_echo "$ac_cv_lib_dld_shl_load" >&6; }
 if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+  lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
 else
   ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
 if test "x$ac_cv_func_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen"
+  lt_cv_dlopen=dlopen
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
@@ -16202,7 +16698,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
 if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
 $as_echo_n "checking for dlopen in -lsvld... " >&6; }
@@ -16249,7 +16745,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
 $as_echo "$ac_cv_lib_svld_dlopen" >&6; }
 if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
 $as_echo_n "checking for dld_link in -ldld... " >&6; }
@@ -16296,7 +16792,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
 $as_echo "$ac_cv_lib_dld_dld_link" >&6; }
 if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+  lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
 fi
 
 
@@ -16317,21 +16813,21 @@ fi
     ;;
   esac
 
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
+  if test no = "$lt_cv_dlopen"; then
     enable_dlopen=no
+  else
+    enable_dlopen=yes
   fi
 
   case $lt_cv_dlopen in
   dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-    save_LDFLAGS="$LDFLAGS"
+    save_LDFLAGS=$LDFLAGS
     wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-    save_LIBS="$LIBS"
+    save_LIBS=$LIBS
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
@@ -16339,7 +16835,7 @@ $as_echo_n "checking whether a program can dlopen itself... " >&6; }
 if ${lt_cv_dlopen_self+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  	  if test "$cross_compiling" = yes; then :
+  	  if test yes = "$cross_compiling"; then :
   lt_cv_dlopen_self=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -16386,9 +16882,9 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -16418,7 +16914,7 @@ _LT_EOF
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -16438,14 +16934,14 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
 $as_echo "$lt_cv_dlopen_self" >&6; }
 
-    if test "x$lt_cv_dlopen_self" = xyes; then
+    if test yes = "$lt_cv_dlopen_self"; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
 if ${lt_cv_dlopen_self_static+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  	  if test "$cross_compiling" = yes; then :
+  	  if test yes = "$cross_compiling"; then :
   lt_cv_dlopen_self_static=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -16492,9 +16988,9 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -16524,7 +17020,7 @@ _LT_EOF
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -16545,9 +17041,9 @@ fi
 $as_echo "$lt_cv_dlopen_self_static" >&6; }
     fi
 
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
     ;;
   esac
 
@@ -16591,7 +17087,7 @@ else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
   darwin*)
-    if test -n "$STRIP" ; then
+    if test -n "$STRIP"; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -16619,7 +17115,7 @@ fi
 
 
 
-  # Report which library types will actually be built
+  # Report what library types will actually be built
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
 $as_echo_n "checking if libtool supports shared libraries... " >&6; }
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
@@ -16627,13 +17123,13 @@ $as_echo "$can_build_shared" >&6; }
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
 $as_echo_n "checking whether to build shared libraries... " >&6; }
-  test "$can_build_shared" = "no" && enable_shared=no
+  test no = "$can_build_shared" && enable_shared=no
 
   # On AIX, shared libraries and static libraries use the same namespace, and
   # are all built from PIC.
   case $host_os in
   aix3*)
-    test "$enable_shared" = yes && enable_static=no
+    test yes = "$enable_shared" && enable_static=no
     if test -n "$RANLIB"; then
       archive_cmds="$archive_cmds~\$RANLIB \$lib"
       postinstall_cmds='$RANLIB $lib'
@@ -16641,8 +17137,12 @@ $as_echo_n "checking whether to build shared libraries... " >&6; }
     ;;
 
   aix[4-9]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
     fi
     ;;
   esac
@@ -16652,7 +17152,7 @@ $as_echo "$enable_shared" >&6; }
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
 $as_echo_n "checking whether to build static libraries... " >&6; }
   # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
+  test yes = "$enable_shared" || enable_static=yes
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
 $as_echo "$enable_static" >&6; }
 
@@ -16666,11 +17166,11 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-CC="$lt_save_CC"
+CC=$lt_save_CC
 
-      if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
+      if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
   ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -16849,7 +17349,7 @@ objext_CXX=$objext
 # the CXX compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="int some_variable = 0;"
 
@@ -16878,7 +17378,7 @@ compiler=$CC
 echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
+$RM -r conftest*
 
   ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
@@ -16910,46 +17410,39 @@ $RM -r conftest*
   CFLAGS=$CXXFLAGS
   compiler=$CC
   compiler_CXX=$CC
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+  func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
 
 
   if test -n "$compiler"; then
     # We don't want -fno-exception when compiling C++ code, so set the
     # no_builtin_flag separately
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
     else
       lt_prog_compiler_no_builtin_flag_CXX=
     fi
 
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       # Set up default GNU C++ configuration
 
 
 
 # Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
 else
   with_gnu_ld=no
 fi
 
 ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   # Check if gcc -print-prog-name=ld gives a path.
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
 $as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
+    # gcc leaves a trailing carriage return, which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -16963,7 +17456,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
-      test -z "$LD" && LD="$ac_prog"
+      test -z "$LD" && LD=$ac_prog
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
@@ -16974,7 +17467,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
     with_gnu_ld=unknown
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
 $as_echo_n "checking for GNU ld... " >&6; }
 else
@@ -16985,32 +17478,32 @@ if ${lt_cv_path_LD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD=$ac_dir/$ac_prog
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
+	test no != "$with_gnu_ld" && break
 	;;
       *)
-	test "$with_gnu_ld" != yes && break
+	test yes != "$with_gnu_ld" && break
 	;;
       esac
     fi
   done
-  IFS="$lt_save_ifs"
+  IFS=$lt_save_ifs
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
 fi
 fi
 
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
 if test -n "$LD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
 $as_echo "$LD" >&6; }
@@ -17046,22 +17539,22 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
 
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      if test yes = "$with_gnu_ld"; then
+        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 
-        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-        export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+        export_dynamic_flag_spec_CXX='$wl--export-dynamic'
 
         # If archive_cmds runs LD, not CC, wlarc should be empty
         # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
         #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
+        wlarc='$wl'
 
         # ancient GNU ld didn't support --whole-archive et. al.
         if eval "`$CC -print-prog-name=ld` --help 2>&1" |
 	  $GREP 'no-whole-archive' > /dev/null; then
-          whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+          whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
         else
           whole_archive_flag_spec_CXX=
         fi
@@ -17098,18 +17591,30 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
         ld_shlibs_CXX=no
         ;;
       aix[4-9]*)
-        if test "$host_cpu" = ia64; then
+        if test ia64 = "$host_cpu"; then
           # On IA64, the linker does run time linking by default, so we don't
           # have to do anything special.
           aix_use_runtimelinking=no
           exp_sym_flag='-Bexport'
-          no_entry_flag=""
+          no_entry_flag=
         else
           aix_use_runtimelinking=no
 
           # Test if we are trying to use run time linking or normal
           # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
           case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	    for ld_flag in $LDFLAGS; do
 	      case $ld_flag in
@@ -17119,6 +17624,13 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
 	        ;;
 	      esac
 	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
 	    ;;
           esac
 
@@ -17137,13 +17649,21 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
         hardcode_direct_absolute_CXX=yes
         hardcode_libdir_separator_CXX=':'
         link_all_deplibs_CXX=yes
-        file_list_spec_CXX='${wl}-f,'
+        file_list_spec_CXX='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          hardcode_direct_CXX=no
+          hardcode_direct_absolute_CXX=no
+          ;;
+        esac
 
-        if test "$GXX" = yes; then
+        if test yes = "$GXX"; then
           case $host_os in aix4.[012]|aix4.[012].*)
           # We only want to do this on AIX 4.2 and lower, the check
           # below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -17161,36 +17681,44 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
 	  fi
           esac
           shared_flag='-shared'
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag="$shared_flag "'${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
 	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
         else
           # not using gcc
-          if test "$host_cpu" = ia64; then
+          if test ia64 = "$host_cpu"; then
 	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	  # chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
           else
-	    if test "$aix_use_runtimelinking" = yes; then
-	      shared_flag='${wl}-G'
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
 	    else
-	      shared_flag='${wl}-bM:SRE'
+	      shared_flag='$wl-bM:SRE'
 	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
           fi
         fi
 
-        export_dynamic_flag_spec_CXX='${wl}-bexpall'
+        export_dynamic_flag_spec_CXX='$wl-bexpall'
         # It seems that -bexpall does not export symbols beginning with
         # underscore (_), so it is better to generate a list of symbols to
 	# export.
         always_export_symbols_CXX=yes
-        if test "$aix_use_runtimelinking" = yes; then
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
           # Warning - without using the other runtime loading flags (-brtl),
           # -berok will link without error, but may produce a broken library.
-          allow_undefined_flag_CXX='-berok'
+          # The "-G" linker flag allows undefined symbols.
+          no_undefined_flag_CXX='-bernotok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
-          if test "${lt_cv_aix_libpath+set}" = set; then
+          if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath__CXX+:} false; then :
@@ -17233,7 +17761,7 @@ fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath__CXX"; then
-    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
   fi
 
 fi
@@ -17241,18 +17769,18 @@ fi
   aix_libpath=$lt_cv_aix_libpath__CXX
 fi
 
-          hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+          hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
 
-          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
         else
-          if test "$host_cpu" = ia64; then
-	    hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+          if test ia64 = "$host_cpu"; then
+	    hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib'
 	    allow_undefined_flag_CXX="-z nodefs"
-	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
           else
 	    # Determine the default libpath from the value encoded in an
 	    # empty executable.
-	    if test "${lt_cv_aix_libpath+set}" = set; then
+	    if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath__CXX+:} false; then :
@@ -17295,7 +17823,7 @@ fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath__CXX"; then
-    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
   fi
 
 fi
@@ -17303,22 +17831,34 @@ fi
   aix_libpath=$lt_cv_aix_libpath__CXX
 fi
 
-	    hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
 	    # Warning - without using the other run time loading flags,
 	    # -berok will link without error, but may produce a broken library.
-	    no_undefined_flag_CXX=' ${wl}-bernotok'
-	    allow_undefined_flag_CXX=' ${wl}-berok'
-	    if test "$with_gnu_ld" = yes; then
+	    no_undefined_flag_CXX=' $wl-bernotok'
+	    allow_undefined_flag_CXX=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
 	      # We only use this code for GNU lds that support --whole-archive.
-	      whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	      whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    else
 	      # Exported symbols can be pulled into shared objects from archives
 	      whole_archive_flag_spec_CXX='$convenience'
 	    fi
 	    archive_cmds_need_lc_CXX=yes
-	    # This is similar to how AIX traditionally builds its shared
-	    # libraries.
-	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	    archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d'
           fi
         fi
         ;;
@@ -17328,7 +17868,7 @@ fi
 	  allow_undefined_flag_CXX=unsupported
 	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	  # support --undefined.  This deserves some investigation.  FIXME
-	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 	else
 	  ld_shlibs_CXX=no
 	fi
@@ -17356,57 +17896,58 @@ fi
 	  # Tell ltmain to make .lib files, not .a files.
 	  libext=lib
 	  # Tell ltmain to make .dll files, not .so files.
-	  shrext_cmds=".dll"
+	  shrext_cmds=.dll
 	  # FIXME: Setting linknames here is a bad hack.
-	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	  archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	    else
-	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	    fi~
-	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	    linknames='
+	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
 	  # The linker will not automatically build a static lib if we build a DLL.
 	  # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
 	  enable_shared_with_static_runtimes_CXX=yes
 	  # Don't use ranlib
 	  old_postinstall_cmds_CXX='chmod 644 $oldlib'
 	  postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
-	    lt_tool_outputfile="@TOOL_OUTPUT@"~
-	    case $lt_outputfile in
-	      *.exe|*.EXE) ;;
-	      *)
-		lt_outputfile="$lt_outputfile.exe"
-		lt_tool_outputfile="$lt_tool_outputfile.exe"
-		;;
-	    esac~
-	    func_to_tool_file "$lt_outputfile"~
-	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	      $RM "$lt_outputfile.manifest";
-	    fi'
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
 	  ;;
 	*)
 	  # g++
 	  # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
 	  # as there is no search path for DLLs.
 	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-	  export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+	  export_dynamic_flag_spec_CXX='$wl--export-all-symbols'
 	  allow_undefined_flag_CXX=unsupported
 	  always_export_symbols_CXX=no
 	  enable_shared_with_static_runtimes_CXX=yes
 
 	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	    # If the export-symbols file already is a .def file (1st line
-	    # is EXPORTS), use it as is; otherwise, prepend...
-	    archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      cp $export_symbols $output_objdir/$soname.def;
-	    else
-	      echo EXPORTS > $output_objdir/$soname.def;
-	      cat $export_symbols >> $output_objdir/$soname.def;
-	    fi~
-	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	  else
 	    ld_shlibs_CXX=no
 	  fi
@@ -17420,27 +17961,27 @@ fi
   hardcode_direct_CXX=no
   hardcode_automatic_CXX=yes
   hardcode_shlibpath_var_CXX=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
 
   else
     whole_archive_flag_spec_CXX=''
   fi
   link_all_deplibs_CXX=yes
-  allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+  allow_undefined_flag_CXX=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-       if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds_CXX="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+       if test yes != "$lt_cv_apple_cc_single_mod"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
     fi
 
   else
@@ -17449,6 +17990,34 @@ fi
 
 	;;
 
+      os2*)
+	hardcode_libdir_flag_spec_CXX='-L$libdir'
+	hardcode_minus_L_CXX=yes
+	allow_undefined_flag_CXX=unsupported
+	shrext_cmds=.dll
+	archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	enable_shared_with_static_runtimes_CXX=yes
+	;;
+
       dgux*)
         case $cc_basename in
           ec++*)
@@ -17483,18 +18052,15 @@ fi
         ld_shlibs_CXX=yes
         ;;
 
-      gnu*)
-        ;;
-
       haiku*)
-        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
         link_all_deplibs_CXX=yes
         ;;
 
       hpux9*)
-        hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
         hardcode_libdir_separator_CXX=:
-        export_dynamic_flag_spec_CXX='${wl}-E'
+        export_dynamic_flag_spec_CXX='$wl-E'
         hardcode_direct_CXX=yes
         hardcode_minus_L_CXX=yes # Not in the search PATH,
 				             # but as the default
@@ -17506,7 +18072,7 @@ fi
             ld_shlibs_CXX=no
             ;;
           aCC*)
-            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             # Commands to make compiler produce verbose output that lists
             # what "hidden" libraries, object files and flags are used when
             # linking a shared library.
@@ -17515,11 +18081,11 @@ fi
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
-            if test "$GXX" = yes; then
-              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            if test yes = "$GXX"; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               ld_shlibs_CXX=no
@@ -17529,15 +18095,15 @@ fi
         ;;
 
       hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-	  hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        if test no = "$with_gnu_ld"; then
+	  hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
 	  hardcode_libdir_separator_CXX=:
 
           case $host_cpu in
             hppa*64*|ia64*)
               ;;
             *)
-	      export_dynamic_flag_spec_CXX='${wl}-E'
+	      export_dynamic_flag_spec_CXX='$wl-E'
               ;;
           esac
         fi
@@ -17563,13 +18129,13 @@ fi
           aCC*)
 	    case $host_cpu in
 	      hppa*64*)
-	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      ia64*)
-	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      *)
-	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	    esac
 	    # Commands to make compiler produce verbose output that lists
@@ -17580,20 +18146,20 @@ fi
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test $with_gnu_ld = no; then
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
 	        case $host_cpu in
 	          hppa*64*)
-	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          ia64*)
-	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          *)
-	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	        esac
 	      fi
@@ -17608,22 +18174,22 @@ fi
       interix[3-9]*)
 	hardcode_direct_CXX=no
 	hardcode_shlibpath_var_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}-E'
+	hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='$wl-E'
 	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
 	# Instead, shared libraries are loaded at an image base (0x10000000 by
 	# default) and relocated if they conflict, which is a slow very memory
 	# consuming and fragmenting process.  To avoid this, we pick a random,
 	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
 	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 	;;
       irix5* | irix6*)
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -17632,22 +18198,22 @@ fi
 	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test "$with_gnu_ld" = no; then
-	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	      else
-	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
 	      fi
 	    fi
 	    link_all_deplibs_CXX=yes
 	    ;;
         esac
-        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
         hardcode_libdir_separator_CXX=:
         inherit_rpath_CXX=yes
         ;;
 
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
         case $cc_basename in
           KCC*)
 	    # Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -17655,8 +18221,8 @@ fi
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
 	    # Commands to make compiler produce verbose output that lists
 	    # what "hidden" libraries, object files and flags are used when
 	    # linking a shared library.
@@ -17665,10 +18231,10 @@ fi
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -17682,59 +18248,59 @@ fi
 	    # earlier do not add the objects themselves.
 	    case `$CC -V 2>&1` in
 	      *"Version 7."*)
-	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	      *)  # Version 8.0 or newer
 	        tmp_idyn=
 	        case $host_cpu in
 		  ia64*) tmp_idyn=' -i_dynamic';;
 		esac
-	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	    esac
 	    archive_cmds_need_lc_CXX=no
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    ;;
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
 	    *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
 	      prelink_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
 	      old_archive_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
-		$RANLIB $oldlib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
 	      archive_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
 	      archive_expsym_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    *) # Version 6 and above use weak symbols
-	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    esac
 
-	    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	    hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
-	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
 
 	    runpath_var=LD_RUN_PATH
 	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
@@ -17748,18 +18314,18 @@ fi
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
 	    ;;
 	  xl* | mpixl* | bgxl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    if test "x$supports_anon_versioning" = xyes; then
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
 	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
-		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-		echo "local: *; };" >> $output_objdir/$libname.ver~
-		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+                cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
 	    fi
 	    ;;
 	  *)
@@ -17767,10 +18333,10 @@ fi
 	    *Sun\ C*)
 	      # Sun C++ 5.9
 	      no_undefined_flag_CXX=' -zdefs'
-	      archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
 	      hardcode_libdir_flag_spec_CXX='-R$libdir'
-	      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	      compiler_needs_object_CXX=yes
 
 	      # Not sure whether something based on
@@ -17828,22 +18394,17 @@ fi
         ld_shlibs_CXX=yes
 	;;
 
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-	ld_shlibs_CXX=no
-	;;
-
-      openbsd*)
+      openbsd* | bitrig*)
 	if test -f /usr/libexec/ld.so; then
 	  hardcode_direct_CXX=yes
 	  hardcode_shlibpath_var_CXX=no
 	  hardcode_direct_absolute_CXX=yes
 	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	    export_dynamic_flag_spec_CXX='${wl}-E'
-	    whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='$wl-E'
+	    whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
 	  fi
 	  output_verbose_link_cmd=func_echo_all
 	else
@@ -17859,9 +18420,9 @@ fi
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
 	    hardcode_libdir_separator_CXX=:
 
 	    # Archives containing C++ object files must be created using
@@ -17879,17 +18440,17 @@ fi
           cxx*)
 	    case $host in
 	      osf3*)
-	        allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	        allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
 		;;
 	      *)
 	        allow_undefined_flag_CXX=' -expect_unresolved \*'
-	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
-	          $RM $lib.exp'
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
 	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
 		;;
 	    esac
@@ -17904,21 +18465,21 @@ fi
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
 	  *)
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
 	      case $host in
 	        osf3*)
-	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	        *)
-	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	      esac
 
-	      hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	      hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
 	      hardcode_libdir_separator_CXX=:
 
 	      # Commands to make compiler produce verbose output that lists
@@ -17964,9 +18525,9 @@ fi
 	    # Sun C++ 4.2, 5.x and Centerline C++
             archive_cmds_need_lc_CXX=yes
 	    no_undefined_flag_CXX=' -zdefs'
-	    archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	    hardcode_libdir_flag_spec_CXX='-R$libdir'
 	    hardcode_shlibpath_var_CXX=no
@@ -17974,7 +18535,7 @@ fi
 	      solaris2.[0-5] | solaris2.[0-5].*) ;;
 	      *)
 		# The compiler driver will combine and reorder linker options,
-		# but understands `-z linker_flag'.
+		# but understands '-z linker_flag'.
 	        # Supported since Solaris 2.6 (maybe 2.5.1?)
 		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
 	        ;;
@@ -17991,30 +18552,30 @@ fi
 	    ;;
           gcx*)
 	    # Green Hills C++ Compiler
-	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 
 	    # The C++ compiler must be used to create the archive.
 	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
 	    ;;
           *)
 	    # GNU C++ compiler with Solaris linker
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      no_undefined_flag_CXX=' $wl-z ${wl}defs'
 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
 	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
-	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
 	        # platform.
-	        archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
@@ -18022,11 +18583,11 @@ fi
 	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
-	      hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	      hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir'
 	      case $host_os in
 		solaris2.[0-5] | solaris2.[0-5].*) ;;
 		*)
-		  whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 		  ;;
 	      esac
 	    fi
@@ -18035,52 +18596,52 @@ fi
         ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag_CXX='${wl}-z,text'
+      no_undefined_flag_CXX='$wl-z,text'
       archive_cmds_need_lc_CXX=no
       hardcode_shlibpath_var_CXX=no
       runpath_var='LD_RUN_PATH'
 
       case $cc_basename in
         CC*)
-	  archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
       esac
       ;;
 
       sysv5* | sco3.2v5* | sco5v6*)
-	# Note: We can NOT use -z defs as we might desire, because we do not
+	# Note: We CANNOT use -z defs as we might desire, because we do not
 	# link with -lc, and that would cause any symbols used from libc to
 	# always be unresolved, which means just about no library would
 	# ever link correctly.  If we're not using GNU ld we use -z text
 	# though, which does catch some bad symbols but isn't as heavy-handed
 	# as -z defs.
-	no_undefined_flag_CXX='${wl}-z,text'
-	allow_undefined_flag_CXX='${wl}-z,nodefs'
+	no_undefined_flag_CXX='$wl-z,text'
+	allow_undefined_flag_CXX='$wl-z,nodefs'
 	archive_cmds_need_lc_CXX=no
 	hardcode_shlibpath_var_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+	hardcode_libdir_flag_spec_CXX='$wl-R,$libdir'
 	hardcode_libdir_separator_CXX=':'
 	link_all_deplibs_CXX=yes
-	export_dynamic_flag_spec_CXX='${wl}-Bexport'
+	export_dynamic_flag_spec_CXX='$wl-Bexport'
 	runpath_var='LD_RUN_PATH'
 
 	case $cc_basename in
           CC*)
-	    archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
-	      '"$old_archive_cmds_CXX"
+              '"$old_archive_cmds_CXX"
 	    reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
-	      '"$reload_cmds_CXX"
+              '"$reload_cmds_CXX"
 	    ;;
 	  *)
-	    archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    ;;
 	esac
       ;;
@@ -18112,10 +18673,10 @@ fi
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
 $as_echo "$ld_shlibs_CXX" >&6; }
-    test "$ld_shlibs_CXX" = no && can_build_shared=no
+    test no = "$ld_shlibs_CXX" && can_build_shared=no
 
-    GCC_CXX="$GXX"
-    LD_CXX="$LD"
+    GCC_CXX=$GXX
+    LD_CXX=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -18159,13 +18720,13 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case ${prev}${p} in
+    case $prev$p in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
        # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
 	 prev=$p
 	 continue
        fi
@@ -18181,16 +18742,16 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
        case $p in
        =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
        esac
-       if test "$pre_test_object_deps_done" = no; then
-	 case ${prev} in
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
 	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
 	   if test -z "$compiler_lib_search_path_CXX"; then
-	     compiler_lib_search_path_CXX="${prev}${p}"
+	     compiler_lib_search_path_CXX=$prev$p
 	   else
-	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p"
 	   fi
 	   ;;
 	 # The "-l" case would never come before the object being
@@ -18198,9 +18759,9 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
 	 esac
        else
 	 if test -z "$postdeps_CXX"; then
-	   postdeps_CXX="${prev}${p}"
+	   postdeps_CXX=$prev$p
 	 else
-	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	   postdeps_CXX="${postdeps_CXX} $prev$p"
 	 fi
        fi
        prev=
@@ -18215,15 +18776,15 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
 	 continue
        fi
 
-       if test "$pre_test_object_deps_done" = no; then
+       if test no = "$pre_test_object_deps_done"; then
 	 if test -z "$predep_objects_CXX"; then
-	   predep_objects_CXX="$p"
+	   predep_objects_CXX=$p
 	 else
 	   predep_objects_CXX="$predep_objects_CXX $p"
 	 fi
        else
 	 if test -z "$postdep_objects_CXX"; then
-	   postdep_objects_CXX="$p"
+	   postdep_objects_CXX=$p
 	 else
 	   postdep_objects_CXX="$postdep_objects_CXX $p"
 	 fi
@@ -18253,51 +18814,6 @@ interix[3-9]*)
   postdep_objects_CXX=
   postdeps_CXX=
   ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC* | sunCC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
 esac
 
 
@@ -18306,7 +18822,7 @@ case " $postdeps_CXX " in
 esac
  compiler_lib_search_dirs_CXX=
 if test -n "${compiler_lib_search_path_CXX}"; then
- compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'`
 fi
 
 
@@ -18345,17 +18861,18 @@ lt_prog_compiler_static_CXX=
 
 
   # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
+  if test yes = "$GXX"; then
     lt_prog_compiler_wl_CXX='-Wl,'
     lt_prog_compiler_static_CXX='-static'
 
     case $host_os in
     aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static_CXX='-Bstatic'
       fi
+      lt_prog_compiler_pic_CXX='-fPIC'
       ;;
 
     amigaos*)
@@ -18366,8 +18883,8 @@ lt_prog_compiler_static_CXX=
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -18382,6 +18899,11 @@ lt_prog_compiler_static_CXX=
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static_CXX='$wl-static'
+	;;
+      esac
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
@@ -18431,7 +18953,7 @@ lt_prog_compiler_static_CXX=
     case $host_os in
       aix[4-9]*)
 	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	  # AIX 5 now supports IA64 processor
 	  lt_prog_compiler_static_CXX='-Bstatic'
 	else
@@ -18471,14 +18993,14 @@ lt_prog_compiler_static_CXX=
 	case $cc_basename in
 	  CC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
 	      lt_prog_compiler_pic_CXX='+Z'
 	    fi
 	    ;;
 	  aCC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
 	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
@@ -18507,7 +19029,7 @@ lt_prog_compiler_static_CXX=
 	    ;;
 	esac
 	;;
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -18515,7 +19037,7 @@ lt_prog_compiler_static_CXX=
 	    lt_prog_compiler_pic_CXX='-fPIC'
 	    ;;
 	  ecpc* )
-	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    # old Intel C++ for x86_64, which still supported -KPIC.
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    lt_prog_compiler_static_CXX='-static'
@@ -18660,7 +19182,7 @@ lt_prog_compiler_static_CXX=
   fi
 
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_CXX=
     ;;
@@ -18692,7 +19214,7 @@ else
   lt_cv_prog_compiler_pic_works_CXX=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -18716,13 +19238,13 @@ else
        lt_cv_prog_compiler_pic_works_CXX=yes
      fi
    fi
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then
     case $lt_prog_compiler_pic_CXX in
      "" | " "*) ;;
      *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
@@ -18748,7 +19270,7 @@ if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works_CXX=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -18767,13 +19289,13 @@ else
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then
     :
 else
     lt_prog_compiler_static_CXX=
@@ -18819,14 +19341,14 @@ else
      fi
    fi
    chmod u+w . 2>&5
-   $RM conftest*
+   $RM -r conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
    $RM out/* && rmdir out
    cd ..
    $RM -r conftest
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
@@ -18871,14 +19393,14 @@ else
      fi
    fi
    chmod u+w . 2>&5
-   $RM conftest*
+   $RM -r conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
    $RM out/* && rmdir out
    cd ..
    $RM -r conftest
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
@@ -18887,22 +19409,22 @@ $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
 
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
   hard_links=yes
-  $RM conftest*
+  $RM -r conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 $as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
@@ -18919,17 +19441,21 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
   case $host_os in
   aix[4-9]*)
     # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
     else
-      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
-    export_symbols_cmds_CXX="$ltdll_cmds"
+    export_symbols_cmds_CXX=$ltdll_cmds
     ;;
   cygwin* | mingw* | cegcc*)
     case $cc_basename in
@@ -18949,7 +19475,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
 $as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
+test no = "$ld_shlibs_CXX" && can_build_shared=no
 
 with_gnu_ld_CXX=$with_gnu_ld
 
@@ -18966,7 +19492,7 @@ x|xyes)
   # Assume -lc should be added
   archive_cmds_need_lc_CXX=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $archive_cmds_CXX in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -18980,7 +19506,7 @@ $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
 if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  $RM conftest*
+  $RM -r conftest*
 	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
 	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
@@ -19015,7 +19541,7 @@ else
 	else
 	  cat conftest.err 1>&5
 	fi
-	$RM conftest*
+	$RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
@@ -19094,7 +19620,7 @@ $as_echo_n "checking dynamic linker characteristics... " >&6; }
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -19111,14 +19637,16 @@ hardcode_into_libs=no
 # flags to be left without arguments
 need_version=unknown
 
+
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix[4-9]*)
@@ -19126,41 +19654,91 @@ aix[4-9]*)
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[01] | aix4.[01].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -19170,18 +19748,18 @@ amigaos*)
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -19189,8 +19767,8 @@ beos*)
 bsdi[45]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -19202,7 +19780,7 @@ bsdi[45]*)
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -19211,8 +19789,8 @@ cygwin* | mingw* | pw32* | cegcc*)
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -19228,16 +19806,16 @@ cygwin* | mingw* | pw32* | cegcc*)
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
 
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -19246,8 +19824,8 @@ cygwin* | mingw* | pw32* | cegcc*)
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -19274,7 +19852,7 @@ cygwin* | mingw* | pw32* | cegcc*)
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -19287,8 +19865,8 @@ cygwin* | mingw* | pw32* | cegcc*)
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -19301,7 +19879,7 @@ cygwin* | mingw* | pw32* | cegcc*)
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -19314,8 +19892,8 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -19327,8 +19905,8 @@ dgux*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -19346,12 +19924,13 @@ freebsd* | dragonfly*)
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -19376,26 +19955,15 @@ freebsd* | dragonfly*)
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -19413,14 +19981,15 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -19428,8 +19997,8 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -19438,8 +20007,8 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -19452,8 +20021,8 @@ interix[3-9]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -19464,7 +20033,7 @@ irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -19472,8 +20041,8 @@ irix5* | irix6* | nonstopux*)
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -19492,8 +20061,8 @@ irix5* | irix6* | nonstopux*)
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -19502,13 +20071,33 @@ linux*oldld* | linux*aout* | linux*coff*)
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec_CXX='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -19560,7 +20149,12 @@ fi
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -19580,12 +20174,12 @@ netbsd*)
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -19595,7 +20189,7 @@ netbsd*)
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -19604,58 +20198,68 @@ newsos6)
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
   else
-    shlibpath_overrides_runpath=yes
+    need_version=yes
   fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -19666,8 +20270,8 @@ solaris*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -19677,11 +20281,11 @@ solaris*)
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -19689,8 +20293,8 @@ sunos4*)
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -19711,24 +20315,24 @@ sysv4 | sysv4.3*)
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -19746,7 +20350,7 @@ tpf*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -19754,8 +20358,8 @@ tpf*)
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -19765,20 +20369,32 @@ uts4*)
 esac
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 $as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
 
 
 
@@ -19821,15 +20437,15 @@ $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action_CXX=
 if test -n "$hardcode_libdir_flag_spec_CXX" ||
    test -n "$runpath_var_CXX" ||
-   test "X$hardcode_automatic_CXX" = "Xyes" ; then
+   test yes = "$hardcode_automatic_CXX"; then
 
   # We can hardcode non-existent directories.
-  if test "$hardcode_direct_CXX" != no &&
+  if test no != "$hardcode_direct_CXX" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" &&
+     test no != "$hardcode_minus_L_CXX"; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action_CXX=relink
   else
@@ -19844,12 +20460,12 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
 $as_echo "$hardcode_action_CXX" >&6; }
 
-if test "$hardcode_action_CXX" = relink ||
-   test "$inherit_rpath_CXX" = yes; then
+if test relink = "$hardcode_action_CXX" ||
+   test yes = "$inherit_rpath_CXX"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -19872,7 +20488,7 @@ fi
   lt_cv_path_LD=$lt_save_path_LD
   lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
   lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -19890,7 +20506,7 @@ ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest
 ac_compiler_gnu=$ac_cv_fc_compiler_gnu
 
 
-if test -z "$FC" || test "X$FC" = "Xno"; then
+if test -z "$FC" || test no = "$FC"; then
   _lt_disable_FC=yes
 fi
 
@@ -19927,7 +20543,7 @@ objext_FC=$objext
 # the FC compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
+if test yes != "$_lt_disable_FC"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="\
       subroutine t
@@ -19963,7 +20579,7 @@ compiler=$CC
 echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
+$RM -r conftest*
 
   ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
@@ -19973,7 +20589,7 @@ $RM -r conftest*
 
 
   # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
+  lt_save_CC=$CC
   lt_save_GCC=$GCC
   lt_save_CFLAGS=$CFLAGS
   CC=${FC-"f95"}
@@ -19982,15 +20598,8 @@ $RM -r conftest*
   GCC=$ac_cv_fc_compiler_gnu
 
   compiler_FC=$CC
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+  func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
 
 
   if test -n "$compiler"; then
@@ -20001,21 +20610,25 @@ $as_echo "$can_build_shared" >&6; }
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
 $as_echo_n "checking whether to build shared libraries... " >&6; }
-    test "$can_build_shared" = "no" && enable_shared=no
+    test no = "$can_build_shared" && enable_shared=no
 
     # On AIX, shared libraries and static libraries use the same namespace, and
     # are all built from PIC.
     case $host_os in
       aix3*)
-        test "$enable_shared" = yes && enable_static=no
+        test yes = "$enable_shared" && enable_static=no
         if test -n "$RANLIB"; then
           archive_cmds="$archive_cmds~\$RANLIB \$lib"
           postinstall_cmds='$RANLIB $lib'
         fi
         ;;
       aix[4-9]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
+	if test ia64 != "$host_cpu"; then
+	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+	  yes,aix,yes) ;;		# shared object as lib.so file only
+	  yes,svr4,*) ;;		# shared object as lib.so archive member only
+	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+	  esac
 	fi
         ;;
     esac
@@ -20025,12 +20638,12 @@ $as_echo "$enable_shared" >&6; }
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
 $as_echo_n "checking whether to build static libraries... " >&6; }
     # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
+    test yes = "$enable_shared" || enable_static=yes
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
 $as_echo "$enable_static" >&6; }
 
-    GCC_FC="$ac_cv_fc_compiler_gnu"
-    LD_FC="$LD"
+    GCC_FC=$ac_cv_fc_compiler_gnu
+    LD_FC=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -20073,13 +20686,13 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case ${prev}${p} in
+    case $prev$p in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
        # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
 	 prev=$p
 	 continue
        fi
@@ -20095,16 +20708,16 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
        case $p in
        =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
        esac
-       if test "$pre_test_object_deps_done" = no; then
-	 case ${prev} in
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
 	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
 	   if test -z "$compiler_lib_search_path_FC"; then
-	     compiler_lib_search_path_FC="${prev}${p}"
+	     compiler_lib_search_path_FC=$prev$p
 	   else
-	     compiler_lib_search_path_FC="${compiler_lib_search_path_FC} ${prev}${p}"
+	     compiler_lib_search_path_FC="${compiler_lib_search_path_FC} $prev$p"
 	   fi
 	   ;;
 	 # The "-l" case would never come before the object being
@@ -20112,9 +20725,9 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
 	 esac
        else
 	 if test -z "$postdeps_FC"; then
-	   postdeps_FC="${prev}${p}"
+	   postdeps_FC=$prev$p
 	 else
-	   postdeps_FC="${postdeps_FC} ${prev}${p}"
+	   postdeps_FC="${postdeps_FC} $prev$p"
 	 fi
        fi
        prev=
@@ -20129,15 +20742,15 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
 	 continue
        fi
 
-       if test "$pre_test_object_deps_done" = no; then
+       if test no = "$pre_test_object_deps_done"; then
 	 if test -z "$predep_objects_FC"; then
-	   predep_objects_FC="$p"
+	   predep_objects_FC=$p
 	 else
 	   predep_objects_FC="$predep_objects_FC $p"
 	 fi
        else
 	 if test -z "$postdep_objects_FC"; then
-	   postdep_objects_FC="$p"
+	   postdep_objects_FC=$p
 	 else
 	   postdep_objects_FC="$postdep_objects_FC $p"
 	 fi
@@ -20166,7 +20779,7 @@ case " $postdeps_FC " in
 esac
  compiler_lib_search_dirs_FC=
 if test -n "${compiler_lib_search_path_FC}"; then
- compiler_lib_search_dirs_FC=`echo " ${compiler_lib_search_path_FC}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ compiler_lib_search_dirs_FC=`echo " ${compiler_lib_search_path_FC}" | $SED -e 's! -L! !g' -e 's!^ !!'`
 fi
 
 
@@ -20186,17 +20799,18 @@ lt_prog_compiler_pic_FC=
 lt_prog_compiler_static_FC=
 
 
-  if test "$GCC" = yes; then
+  if test yes = "$GCC"; then
     lt_prog_compiler_wl_FC='-Wl,'
     lt_prog_compiler_static_FC='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static_FC='-Bstatic'
       fi
+      lt_prog_compiler_pic_FC='-fPIC'
       ;;
 
     amigaos*)
@@ -20207,8 +20821,8 @@ lt_prog_compiler_static_FC=
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             lt_prog_compiler_pic_FC='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -20224,6 +20838,11 @@ lt_prog_compiler_static_FC=
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       lt_prog_compiler_pic_FC='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static_FC='$wl-static'
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -20294,7 +20913,7 @@ lt_prog_compiler_static_FC=
     case $host_os in
     aix*)
       lt_prog_compiler_wl_FC='-Wl,'
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static_FC='-Bstatic'
       else
@@ -20302,10 +20921,29 @@ lt_prog_compiler_static_FC=
       fi
       ;;
 
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_FC='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        lt_prog_compiler_wl_FC='-Wl,-Wl,,'
+        lt_prog_compiler_pic_FC='-PIC'
+        lt_prog_compiler_static_FC='-Bstatic'
+        ;;
+      esac
+      ;;
+
     mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic_FC='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static_FC='$wl-static'
+	;;
+      esac
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -20321,7 +20959,7 @@ lt_prog_compiler_static_FC=
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_FC='${wl}-a ${wl}archive'
+      lt_prog_compiler_static_FC='$wl-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
@@ -20330,9 +20968,9 @@ lt_prog_compiler_static_FC=
       lt_prog_compiler_static_FC='-non_shared'
       ;;
 
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
       case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
+      # old Intel for x86_64, which still supported -KPIC.
       ecc*)
 	lt_prog_compiler_wl_FC='-Wl,'
 	lt_prog_compiler_pic_FC='-KPIC'
@@ -20357,6 +20995,12 @@ lt_prog_compiler_static_FC=
 	lt_prog_compiler_pic_FC='-PIC'
 	lt_prog_compiler_static_FC='-Bstatic'
 	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='-fPIC'
+	lt_prog_compiler_static_FC='-static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -20454,7 +21098,7 @@ lt_prog_compiler_static_FC=
       ;;
 
     sysv4*MP*)
-      if test -d /usr/nec ;then
+      if test -d /usr/nec; then
 	lt_prog_compiler_pic_FC='-Kconform_pic'
 	lt_prog_compiler_static_FC='-Bstatic'
       fi
@@ -20483,7 +21127,7 @@ lt_prog_compiler_static_FC=
   fi
 
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_FC=
     ;;
@@ -20515,7 +21159,7 @@ else
   lt_cv_prog_compiler_pic_works_FC=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_FC"
+   lt_compiler_flag="$lt_prog_compiler_pic_FC"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -20539,13 +21183,13 @@ else
        lt_cv_prog_compiler_pic_works_FC=yes
      fi
    fi
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_FC" >&5
 $as_echo "$lt_cv_prog_compiler_pic_works_FC" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works_FC" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works_FC"; then
     case $lt_prog_compiler_pic_FC in
      "" | " "*) ;;
      *) lt_prog_compiler_pic_FC=" $lt_prog_compiler_pic_FC" ;;
@@ -20571,7 +21215,7 @@ if ${lt_cv_prog_compiler_static_works_FC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works_FC=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -20590,13 +21234,13 @@ else
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_FC" >&5
 $as_echo "$lt_cv_prog_compiler_static_works_FC" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works_FC" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works_FC"; then
     :
 else
     lt_prog_compiler_static_FC=
@@ -20642,14 +21286,14 @@ else
      fi
    fi
    chmod u+w . 2>&5
-   $RM conftest*
+   $RM -r conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
    $RM out/* && rmdir out
    cd ..
    $RM -r conftest
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5
@@ -20694,14 +21338,14 @@ else
      fi
    fi
    chmod u+w . 2>&5
-   $RM conftest*
+   $RM -r conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
    $RM out/* && rmdir out
    cd ..
    $RM -r conftest
-   $RM conftest*
+   $RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5
@@ -20710,22 +21354,22 @@ $as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; }
 
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_FC" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o_FC" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
   hard_links=yes
-  $RM conftest*
+  $RM -r conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 $as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
@@ -20765,9 +21409,9 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
   # included in the symbol list
   include_expsyms_FC=
   # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
   exclude_expsyms_FC='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
@@ -20782,7 +21426,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
@@ -20790,7 +21434,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
     # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
-  openbsd*)
+  openbsd* | bitrig*)
     with_gnu_ld=no
     ;;
   esac
@@ -20800,7 +21444,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
   # On some targets, GNU ld is compatible enough with the native linker
   # that we're better off using the native interface for both.
   lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     case $host_os in
       aix*)
 	# The AIX port of GNU ld has always aspired to compatibility
@@ -20822,24 +21466,24 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
     esac
   fi
 
-  if test "$lt_use_gnu_ld_interface" = yes; then
+  if test yes = "$lt_use_gnu_ld_interface"; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+    wlarc='$wl'
 
     # Set some defaults for GNU ld with shared library support. These
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
-    export_dynamic_flag_spec_FC='${wl}--export-dynamic'
+    hardcode_libdir_flag_spec_FC='$wl-rpath $wl$libdir'
+    export_dynamic_flag_spec_FC='$wl--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec_FC="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      whole_archive_flag_spec_FC=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
     else
       whole_archive_flag_spec_FC=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>&1` in
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -20852,7 +21496,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
     case $host_os in
     aix[3-9]*)
       # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
+      if test ia64 != "$host_cpu"; then
 	ld_shlibs_FC=no
 	cat <<_LT_EOF 1>&2
 
@@ -20871,7 +21515,7 @@ _LT_EOF
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds_FC=''
         ;;
       m68k)
@@ -20887,7 +21531,7 @@ _LT_EOF
 	allow_undefined_flag_FC=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_FC='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds_FC='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       else
 	ld_shlibs_FC=no
       fi
@@ -20897,7 +21541,7 @@ _LT_EOF
       # _LT_TAGVAR(hardcode_libdir_flag_spec, FC) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec_FC='-L$libdir'
-      export_dynamic_flag_spec_FC='${wl}--export-all-symbols'
+      export_dynamic_flag_spec_FC='$wl--export-all-symbols'
       allow_undefined_flag_FC=unsupported
       always_export_symbols_FC=no
       enable_shared_with_static_runtimes_FC=yes
@@ -20905,61 +21549,89 @@ _LT_EOF
       exclude_expsyms_FC='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	archive_expsym_cmds_FC='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
 	ld_shlibs_FC=no
       fi
       ;;
 
     haiku*)
-      archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       link_all_deplibs_FC=yes
       ;;
 
+    os2*)
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      hardcode_minus_L_FC=yes
+      allow_undefined_flag_FC=unsupported
+      shrext_cmds=.dll
+      archive_cmds_FC='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds_FC='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds_FC='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes_FC=yes
+      ;;
+
     interix[3-9]*)
       hardcode_direct_FC=no
       hardcode_shlibpath_var_FC=no
-      hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_FC='${wl}-E'
+      hardcode_libdir_flag_spec_FC='$wl-rpath,$libdir'
+      export_dynamic_flag_spec_FC='$wl-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_FC='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_FC='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
+      if test linux-dietlibc = "$host_os"; then
 	case $cc_basename in
 	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
 	esac
       fi
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
+	 && test no = "$tmp_diet"
       then
 	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec_FC='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95* | pgfortran*)
 					# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec_FC='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -20970,42 +21642,47 @@ _LT_EOF
 	lf95*)				# Lahey Fortran 8.1
 	  whole_archive_flag_spec_FC=
 	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
 	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
 	nvcc*)	# Cuda Compiler Driver 2.2
-	  whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec_FC='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object_FC=yes
 	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec_FC='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec_FC='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object_FC=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
 	esac
-	archive_cmds_FC='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds_FC='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 
-        if test "x$supports_anon_versioning" = xyes; then
+        if test yes = "$supports_anon_versioning"; then
           archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
+	tcc*)
+	  export_dynamic_flag_spec_FC='-rdynamic'
+	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  whole_archive_flag_spec_FC='--whole-archive$convenience --no-whole-archive'
-	  hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_flag_spec_FC='$wl-rpath $wl$libdir'
 	  archive_cmds_FC='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
+	  if test yes = "$supports_anon_versioning"; then
 	    archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -21019,8 +21696,8 @@ _LT_EOF
 	archive_cmds_FC='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -21038,8 +21715,8 @@ _LT_EOF
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs_FC=no
       fi
@@ -21051,7 +21728,7 @@ _LT_EOF
 	ld_shlibs_FC=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
 *** reliably create shared libraries on SCO systems.  Therefore, libtool
 *** is disabling shared libraries support.  We urge you to upgrade GNU
 *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
@@ -21066,9 +21743,9 @@ _LT_EOF
 	  # DT_RUNPATH tag from executables and libraries.  But doing so
 	  # requires that you compile everything twice, which is a pain.
 	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
-	    archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	    hardcode_libdir_flag_spec_FC='$wl-rpath $wl$libdir'
+	    archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    ld_shlibs_FC=no
 	  fi
@@ -21085,15 +21762,15 @@ _LT_EOF
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs_FC=no
       fi
       ;;
     esac
 
-    if test "$ld_shlibs_FC" = no; then
+    if test no = "$ld_shlibs_FC"; then
       runpath_var=
       hardcode_libdir_flag_spec_FC=
       export_dynamic_flag_spec_FC=
@@ -21109,7 +21786,7 @@ _LT_EOF
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L_FC=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct_FC=unsupported
@@ -21117,34 +21794,57 @@ _LT_EOF
       ;;
 
     aix[4-9]*)
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
 	aix_use_runtimelinking=no
 	exp_sym_flag='-Bexport'
-	no_entry_flag=""
+	no_entry_flag=
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds_FC='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds_FC='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds_FC='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds_FC='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
 	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
 	    aix_use_runtimelinking=yes
 	    break
 	  fi
 	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
 	  ;;
 	esac
 
@@ -21163,13 +21863,21 @@ _LT_EOF
       hardcode_direct_absolute_FC=yes
       hardcode_libdir_separator_FC=':'
       link_all_deplibs_FC=yes
-      file_list_spec_FC='${wl}-f,'
+      file_list_spec_FC='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	hardcode_direct_FC=no
+	hardcode_direct_absolute_FC=no
+	;;
+      esac
 
-      if test "$GCC" = yes; then
+      if test yes = "$GCC"; then
 	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -21188,35 +21896,42 @@ _LT_EOF
 	  ;;
 	esac
 	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
 	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
       else
 	# not using gcc
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
 	  else
-	    shared_flag='${wl}-bM:SRE'
+	    shared_flag='$wl-bM:SRE'
 	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
 	fi
       fi
 
-      export_dynamic_flag_spec_FC='${wl}-bexpall'
+      export_dynamic_flag_spec_FC='$wl-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       always_export_symbols_FC=yes
-      if test "$aix_use_runtimelinking" = yes; then
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	allow_undefined_flag_FC='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        if test "${lt_cv_aix_libpath+set}" = set; then
+        if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath__FC+:} false; then :
@@ -21245,7 +21960,7 @@ fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath__FC"; then
-    lt_cv_aix_libpath__FC="/usr/lib:/lib"
+    lt_cv_aix_libpath__FC=/usr/lib:/lib
   fi
 
 fi
@@ -21253,17 +21968,17 @@ fi
   aix_libpath=$lt_cv_aix_libpath__FC
 fi
 
-        hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds_FC='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        hardcode_libdir_flag_spec_FC='$wl-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds_FC='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_FC='${wl}-R $libdir:/usr/lib:/lib'
+	if test ia64 = "$host_cpu"; then
+	  hardcode_libdir_flag_spec_FC='$wl-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag_FC="-z nodefs"
-	  archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 if test "${lt_cv_aix_libpath+set}" = set; then
+	 if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath__FC+:} false; then :
@@ -21292,7 +22007,7 @@ fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath__FC"; then
-    lt_cv_aix_libpath__FC="/usr/lib:/lib"
+    lt_cv_aix_libpath__FC=/usr/lib:/lib
   fi
 
 fi
@@ -21300,21 +22015,33 @@ fi
   aix_libpath=$lt_cv_aix_libpath__FC
 fi
 
-	 hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 hardcode_libdir_flag_spec_FC='$wl-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_FC=' ${wl}-bernotok'
-	  allow_undefined_flag_FC=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
+	  no_undefined_flag_FC=' $wl-bernotok'
+	  allow_undefined_flag_FC=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
 	    # We only use this code for GNU lds that support --whole-archive.
-	    whole_archive_flag_spec_FC='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    whole_archive_flag_spec_FC='$wl--whole-archive$convenience $wl--no-whole-archive'
 	  else
 	    # Exported symbols can be pulled into shared objects from archives
 	    whole_archive_flag_spec_FC='$convenience'
 	  fi
 	  archive_cmds_need_lc_FC=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  archive_expsym_cmds_FC='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    archive_expsym_cmds_FC="$archive_expsym_cmds_FC"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    archive_expsym_cmds_FC="$archive_expsym_cmds_FC"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    archive_expsym_cmds_FC="$archive_expsym_cmds_FC"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  archive_expsym_cmds_FC="$archive_expsym_cmds_FC"'~$RM -r $output_objdir/$realname.d'
 	fi
       fi
       ;;
@@ -21323,7 +22050,7 @@ fi
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds_FC=''
         ;;
       m68k)
@@ -21353,16 +22080,17 @@ fi
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
-	archive_cmds_FC='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
+	archive_cmds_FC='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	archive_expsym_cmds_FC='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
 	# The linker will not automatically build a static lib if we build a DLL.
 	# _LT_TAGVAR(old_archive_from_new_cmds, FC)='true'
 	enable_shared_with_static_runtimes_FC=yes
@@ -21371,18 +22099,18 @@ fi
 	# Don't use ranlib
 	old_postinstall_cmds_FC='chmod 644 $oldlib'
 	postlink_cmds_FC='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
 	;;
       *)
 	# Assume MSVC wrapper
@@ -21391,7 +22119,7 @@ fi
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
 	archive_cmds_FC='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
 	# The linker will automatically build a .lib file if we build a DLL.
@@ -21410,24 +22138,24 @@ fi
   hardcode_direct_FC=no
   hardcode_automatic_FC=yes
   hardcode_shlibpath_var_FC=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec_FC='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec_FC='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
     compiler_needs_object_FC=yes
   else
     whole_archive_flag_spec_FC=''
   fi
   link_all_deplibs_FC=yes
-  allow_undefined_flag_FC="$_lt_dar_allow_undefined"
+  allow_undefined_flag_FC=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    archive_cmds_FC="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds_FC="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds_FC="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds_FC="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    archive_cmds_FC="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds_FC="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds_FC="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds_FC="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
 
   else
   ld_shlibs_FC=no
@@ -21469,33 +22197,33 @@ fi
       ;;
 
     hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_FC='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      if test yes = "$GCC"; then
+	archive_cmds_FC='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       else
-	archive_cmds_FC='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds_FC='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       fi
-      hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+      hardcode_libdir_flag_spec_FC='$wl+b $wl$libdir'
       hardcode_libdir_separator_FC=:
       hardcode_direct_FC=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
       hardcode_minus_L_FC=yes
-      export_dynamic_flag_spec_FC='${wl}-E'
+      export_dynamic_flag_spec_FC='$wl-E'
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	archive_cmds_FC='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds_FC='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec_FC='$wl+b $wl$libdir'
 	hardcode_libdir_separator_FC=:
 	hardcode_direct_FC=yes
 	hardcode_direct_absolute_FC=yes
-	export_dynamic_flag_spec_FC='${wl}-E'
+	export_dynamic_flag_spec_FC='$wl-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	hardcode_minus_L_FC=yes
@@ -21503,33 +22231,33 @@ fi
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test yes,no = "$GCC,$with_gnu_ld"; then
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds_FC='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_FC='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_FC='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_FC='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_FC='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_FC='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_FC='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec_FC='$wl+b $wl$libdir'
 	hardcode_libdir_separator_FC=:
 
 	case $host_cpu in
@@ -21540,7 +22268,7 @@ fi
 	*)
 	  hardcode_direct_FC=yes
 	  hardcode_direct_absolute_FC=yes
-	  export_dynamic_flag_spec_FC='${wl}-E'
+	  export_dynamic_flag_spec_FC='$wl-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
@@ -21551,8 +22279,8 @@ fi
       ;;
 
     irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
@@ -21562,8 +22290,8 @@ $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >
 if ${lt_cv_irix_exported_symbol+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+  save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
 	   cat > conftest.$ac_ext <<_ACEOF
 
       subroutine foo
@@ -21576,24 +22304,34 @@ else
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-           LDFLAGS="$save_LDFLAGS"
+           LDFLAGS=$save_LDFLAGS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
 $as_echo "$lt_cv_irix_exported_symbol" >&6; }
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
 	fi
       else
-	archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
       fi
       archive_cmds_need_lc_FC='no'
-      hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec_FC='$wl-rpath $wl$libdir'
       hardcode_libdir_separator_FC=:
       inherit_rpath_FC=yes
       link_all_deplibs_FC=yes
       ;;
 
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	ld_shlibs_FC=yes
+	archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
     netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
@@ -21608,7 +22346,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
     newsos6)
       archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct_FC=yes
-      hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec_FC='$wl-rpath $wl$libdir'
       hardcode_libdir_separator_FC=:
       hardcode_shlibpath_var_FC=no
       ;;
@@ -21616,27 +22354,19 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
     *nto* | *qnx*)
       ;;
 
-    openbsd*)
+    openbsd* | bitrig*)
       if test -f /usr/libexec/ld.so; then
 	hardcode_direct_FC=yes
 	hardcode_shlibpath_var_FC=no
 	hardcode_direct_absolute_FC=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
 	  archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec_FC='${wl}-E'
+	  archive_expsym_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_FC='$wl-rpath,$libdir'
+	  export_dynamic_flag_spec_FC='$wl-E'
 	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec_FC='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
-	     ;;
-	  esac
+	  archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  hardcode_libdir_flag_spec_FC='$wl-rpath,$libdir'
 	fi
       else
 	ld_shlibs_FC=no
@@ -21647,33 +22377,53 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       hardcode_libdir_flag_spec_FC='-L$libdir'
       hardcode_minus_L_FC=yes
       allow_undefined_flag_FC=unsupported
-      archive_cmds_FC='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_from_new_cmds_FC='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      shrext_cmds=.dll
+      archive_cmds_FC='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds_FC='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds_FC='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes_FC=yes
       ;;
 
     osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	allow_undefined_flag_FC=' $wl-expect_unresolved $wl\*'
+	archive_cmds_FC='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
       else
 	allow_undefined_flag_FC=' -expect_unresolved \*'
-	archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds_FC='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
       fi
       archive_cmds_need_lc_FC='no'
-      hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec_FC='$wl-rpath $wl$libdir'
       hardcode_libdir_separator_FC=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_FC='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      if test yes = "$GCC"; then
+	allow_undefined_flag_FC=' $wl-expect_unresolved $wl\*'
+	archive_cmds_FC='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	hardcode_libdir_flag_spec_FC='$wl-rpath $wl$libdir'
       else
 	allow_undefined_flag_FC=' -expect_unresolved \*'
-	archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds_FC='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	archive_expsym_cmds_FC='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec_FC='-rpath $libdir'
@@ -21684,24 +22434,24 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
 
     solaris*)
       no_undefined_flag_FC=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_FC='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	archive_cmds_FC='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
 	  wlarc=''
-	  archive_cmds_FC='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds_FC='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
 	  ;;
 	*)
-	  wlarc='${wl}'
-	  archive_cmds_FC='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  wlarc='$wl'
+	  archive_cmds_FC='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
 	  archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
 	  ;;
 	esac
       fi
@@ -21711,11 +22461,11 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       solaris2.[0-5] | solaris2.[0-5].*) ;;
       *)
 	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
 	# but is careful enough not to reorder.
 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec_FC='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	if test yes = "$GCC"; then
+	  whole_archive_flag_spec_FC='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 	else
 	  whole_archive_flag_spec_FC='-z allextract$convenience -z defaultextract'
 	fi
@@ -21725,10 +22475,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       ;;
 
     sunos4*)
-      if test "x$host_vendor" = xsequent; then
+      if test sequent = "$host_vendor"; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	archive_cmds_FC='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_FC='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds_FC='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
@@ -21777,43 +22527,43 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag_FC='${wl}-z,text'
+      no_undefined_flag_FC='$wl-z,text'
       archive_cmds_need_lc_FC=no
       hardcode_shlibpath_var_FC=no
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds_FC='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_FC='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
+      # Note: We CANNOT use -z defs as we might desire, because we do not
       # link with -lc, and that would cause any symbols used from libc to
       # always be unresolved, which means just about no library would
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      no_undefined_flag_FC='${wl}-z,text'
-      allow_undefined_flag_FC='${wl}-z,nodefs'
+      no_undefined_flag_FC='$wl-z,text'
+      allow_undefined_flag_FC='$wl-z,nodefs'
       archive_cmds_need_lc_FC=no
       hardcode_shlibpath_var_FC=no
-      hardcode_libdir_flag_spec_FC='${wl}-R,$libdir'
+      hardcode_libdir_flag_spec_FC='$wl-R,$libdir'
       hardcode_libdir_separator_FC=':'
       link_all_deplibs_FC=yes
-      export_dynamic_flag_spec_FC='${wl}-Bexport'
+      export_dynamic_flag_spec_FC='$wl-Bexport'
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds_FC='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_FC='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -21828,10 +22578,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       ;;
     esac
 
-    if test x$host_vendor = xsni; then
+    if test sni = "$host_vendor"; then
       case $host in
       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	export_dynamic_flag_spec_FC='${wl}-Blargedynsym'
+	export_dynamic_flag_spec_FC='$wl-Blargedynsym'
 	;;
       esac
     fi
@@ -21839,7 +22589,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_FC" >&5
 $as_echo "$ld_shlibs_FC" >&6; }
-test "$ld_shlibs_FC" = no && can_build_shared=no
+test no = "$ld_shlibs_FC" && can_build_shared=no
 
 with_gnu_ld_FC=$with_gnu_ld
 
@@ -21856,7 +22606,7 @@ x|xyes)
   # Assume -lc should be added
   archive_cmds_need_lc_FC=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $archive_cmds_FC in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -21870,7 +22620,7 @@ $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
 if ${lt_cv_archive_cmds_need_lc_FC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  $RM conftest*
+  $RM -r conftest*
 	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
 	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
@@ -21905,7 +22655,7 @@ else
 	else
 	  cat conftest.err 1>&5
 	fi
-	$RM conftest*
+	$RM -r conftest*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_FC" >&5
@@ -21984,7 +22734,7 @@ $as_echo_n "checking dynamic linker characteristics... " >&6; }
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -22001,14 +22751,16 @@ hardcode_into_libs=no
 # flags to be left without arguments
 need_version=unknown
 
+
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix[4-9]*)
@@ -22016,41 +22768,91 @@ aix[4-9]*)
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[01] | aix4.[01].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -22060,18 +22862,18 @@ amigaos*)
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -22079,8 +22881,8 @@ beos*)
 bsdi[45]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -22092,7 +22894,7 @@ bsdi[45]*)
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -22101,8 +22903,8 @@ cygwin* | mingw* | pw32* | cegcc*)
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -22118,16 +22920,16 @@ cygwin* | mingw* | pw32* | cegcc*)
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
 
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -22136,8 +22938,8 @@ cygwin* | mingw* | pw32* | cegcc*)
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -22164,7 +22966,7 @@ cygwin* | mingw* | pw32* | cegcc*)
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -22177,8 +22979,8 @@ cygwin* | mingw* | pw32* | cegcc*)
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -22191,7 +22993,7 @@ cygwin* | mingw* | pw32* | cegcc*)
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -22204,8 +23006,8 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -22217,8 +23019,8 @@ dgux*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -22236,12 +23038,13 @@ freebsd* | dragonfly*)
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -22266,26 +23069,15 @@ freebsd* | dragonfly*)
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -22303,14 +23095,15 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -22318,8 +23111,8 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -22328,8 +23121,8 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -22342,8 +23135,8 @@ interix[3-9]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -22354,7 +23147,7 @@ irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -22362,8 +23155,8 @@ irix5* | irix6* | nonstopux*)
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -22382,8 +23175,8 @@ irix5* | irix6* | nonstopux*)
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -22392,13 +23185,33 @@ linux*oldld* | linux*aout* | linux*coff*)
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec_FC='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -22436,7 +23249,12 @@ fi
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -22456,12 +23274,12 @@ netbsd*)
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -22471,7 +23289,7 @@ netbsd*)
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -22480,58 +23298,68 @@ newsos6)
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
   else
-    shlibpath_overrides_runpath=yes
+    need_version=yes
   fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -22542,8 +23370,8 @@ solaris*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -22553,11 +23381,11 @@ solaris*)
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -22565,8 +23393,8 @@ sunos4*)
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -22587,24 +23415,24 @@ sysv4 | sysv4.3*)
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -22622,7 +23450,7 @@ tpf*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -22630,8 +23458,8 @@ tpf*)
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -22641,20 +23469,32 @@ uts4*)
 esac
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 $as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
 
 
 
@@ -22697,15 +23537,15 @@ $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action_FC=
 if test -n "$hardcode_libdir_flag_spec_FC" ||
    test -n "$runpath_var_FC" ||
-   test "X$hardcode_automatic_FC" = "Xyes" ; then
+   test yes = "$hardcode_automatic_FC"; then
 
   # We can hardcode non-existent directories.
-  if test "$hardcode_direct_FC" != no &&
+  if test no != "$hardcode_direct_FC" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, FC)" != no &&
-     test "$hardcode_minus_L_FC" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, FC)" &&
+     test no != "$hardcode_minus_L_FC"; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action_FC=relink
   else
@@ -22720,12 +23560,12 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_FC" >&5
 $as_echo "$hardcode_action_FC" >&6; }
 
-if test "$hardcode_action_FC" = relink ||
-   test "$inherit_rpath_FC" = yes; then
+if test relink = "$hardcode_action_FC" ||
+   test yes = "$inherit_rpath_FC"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -22741,7 +23581,7 @@ fi
   GCC=$lt_save_GCC
   CC=$lt_save_CC
   CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
+fi # test yes != "$_lt_disable_FC"
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -22768,8 +23608,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-
-
 ## ----------------------------------------------------------------------
 ## Check if we should install only statically linked executables.
 ##   This check needs to occur after libtool is initialized because
@@ -22849,35 +23687,6 @@ $as_echo "error" >&6; }
 esac
 
 ## ----------------------------------------------------------------------
-## pmake will throw an error if variables are undefined in a Makefile.
-## These errors can be changed to warnings using the -V flag.
-##
- AM_MAKEFLAGS=""
-
-## Don't run test if MAKE is defined but is the empty string
-if test -n "${MAKE-make}"; then
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether make will build with undefined variables" >&5
-$as_echo_n "checking whether make will build with undefined variables... " >&6; }
-
-  cat >maketest <<EOF
-foo: \$(UNDEFINED) \$(UNDEFINED2)
-	@echo \$(UNDEFINED3) works
-EOF
-
-  if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-  else
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, setting -V flag" >&5
-$as_echo "no, setting -V flag" >&6; }
-    AM_MAKEFLAGS="\-V"
-  fi
-
-  rm maketest
-fi
-
-## ----------------------------------------------------------------------
 ## Production flags?  Save the value in $CONFIG_MODE so we have it for
 ## the record.
 ##
@@ -27853,10 +28662,9 @@ fi
 ## ----------------------------------------------------------------------
 ## Check if Direct I/O driver is enabled by --enable-direct-vfd
 ##
-
-## Check these regardless. If the checks are moved inside the main
-## direct VFD block, the output is nested.
-
+## ----------------------------------------------------------------------
+## Check if Direct I/O driver is enabled by --enable-direct-vfd
+##
 if ${hdf5_cv_direct_io+:} false; then :
   $as_echo_n "(cached) " >&6
 else
@@ -29291,7 +30099,7 @@ _ASBOX
 } >&5
 
 lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
+'$as_me' creates a local libtool stub from the current configuration,
 for use in further configure time tests before the real libtool is
 generated.
 
@@ -29305,14 +30113,14 @@ Usage: $0 [OPTIONS]
 Report bugs to <bug-libtool@gnu.org>."
 
 lt_cl_version="\
-HDF5 config.lt 1.9.231
+HDF5 config.lt 1.9.232
 configured by $0, generated by GNU Autoconf 2.69.
 
 Copyright (C) 2011 Free Software Foundation, Inc.
 This config.lt script is free software; the Free Software Foundation
 gives unlimited permision to copy, distribute and modify it."
 
-while test $# != 0
+while test 0 != $#
 do
   case $1 in
     --version | --v* | -V )
@@ -29325,10 +30133,10 @@ do
       lt_cl_silent=: ;;
 
     -*) as_fn_error $? "unrecognized option: $1
-Try \`$0 --help' for more information." "$LINENO" 5 ;;
+Try '$0 --help' for more information." "$LINENO" 5 ;;
 
     *) as_fn_error $? "unrecognized argument: $1
-Try \`$0 --help' for more information." "$LINENO" 5 ;;
+Try '$0 --help' for more information." "$LINENO" 5 ;;
   esac
   shift
 done
@@ -29354,6 +30162,7 @@ enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
 enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
 pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
 enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
 SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
 ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
 PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
@@ -29403,10 +30212,13 @@ compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
 GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
 nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
 lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
 objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
 MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
 lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
@@ -29471,7 +30283,8 @@ finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
 finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
 hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
 sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
 hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
 enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
 enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
@@ -29624,9 +30437,12 @@ CFLAGS \
 compiler \
 lt_cv_sys_global_symbol_pipe \
 lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
 nm_file_list_spec \
+lt_cv_truncate_bin \
 lt_prog_compiler_no_builtin_flag \
 lt_prog_compiler_pic \
 lt_prog_compiler_wl \
@@ -29717,7 +30533,7 @@ compiler_lib_search_path_CXX \
 compiler_lib_search_path_FC; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -29744,7 +30560,8 @@ postinstall_cmds \
 postuninstall_cmds \
 finish_cmds \
 sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path \
 reload_cmds_CXX \
 reload_cmds_FC \
 old_archive_cmds_CXX \
@@ -29769,7 +30586,7 @@ postlink_cmds_CXX \
 postlink_cmds_FC; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -29778,19 +30595,16 @@ postlink_cmds_FC; do
 done
 
 ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
 
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
 # commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
 
     PACKAGE='$PACKAGE'
     VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
     RM='$RM'
     ofile='$ofile'
 
@@ -29807,55 +30621,53 @@ cat >>"$CONFIG_LT" <<\_LTEOF
 $as_echo "$as_me: creating $ofile" >&6;}
 
 
-    # See if we are running on zsh, and set the options which allow our
+    # See if we are running on zsh, and set the options that allow our
     # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
+    if test -n "${ZSH_VERSION+set}"; then
       setopt NO_GLOB_SUBST
     fi
 
-    cfgfile="${ofile}T"
+    cfgfile=${ofile}T
     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
     $RM "$cfgfile"
 
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
 #
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
 #
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 # The names of the tagged configurations supported by this script.
-available_tags="CXX FC "
+available_tags='CXX FC '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
 
 # ### BEGIN LIBTOOL CONFIG
 
@@ -29875,6 +30687,9 @@ pic_mode=$pic_mode
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
 # Shell to use when invoking shell scripts.
 SHELL=$lt_SHELL
 
@@ -29992,18 +30807,27 @@ global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 # Transform the output of nm in a proper C declaration.
 global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
 # Transform the output of nm in a C name address pair.
 global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
 # Transform the output of nm in a C name address pair when lib prefix is needed.
 global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
 # Specify filename containing input files for \$NM.
 nm_file_list_spec=$lt_nm_file_list_spec
 
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
 lt_sysroot=$lt_sysroot
 
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
@@ -30094,8 +30918,11 @@ hardcode_into_libs=$hardcode_into_libs
 # Compile-time system search path for libraries.
 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
 
 # Whether dlopen is supported.
 dlopen_support=$enable_dlopen
@@ -30188,13 +31015,13 @@ hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute
 
@@ -30260,13 +31087,72 @@ compiler_lib_search_path=$lt_compiler_lib_search_path
 
 _LT_EOF
 
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
   case $host_os in
   aix3*)
     cat <<\_LT_EOF >> "$cfgfile"
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
@@ -30275,7 +31161,7 @@ _LT_EOF
   esac
 
 
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 
 
   # We use sed instead of cat because bash on DJGPP gets confused if
@@ -30285,165 +31171,6 @@ ltmain="$ac_aux_dir/ltmain.sh"
   sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
-  if test x"$xsi_shell" = xyes; then
-  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\    # positional parameters, so assign one to ordinary parameter first.\
-\    func_stripname_result=${3}\
-\    func_stripname_result=${func_stripname_result#"${1}"}\
-\    func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\    func_split_long_opt_name=${1%%=*}\
-\    func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\    func_split_short_opt_arg=${1#??}\
-\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\    case ${1} in\
-\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\      *)    func_lo2o_result=${1} ;;\
-\    esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
-    func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
-    func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
-    func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
-    eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\    func_quote_for_eval "${2}"\
-\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
    mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
@@ -30530,13 +31257,13 @@ hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct_CXX
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute_CXX
 
@@ -30683,13 +31410,13 @@ hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_FC
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator_FC
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct_FC
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute_FC
 
@@ -30764,7 +31491,7 @@ chmod +x "$CONFIG_LT"
 # open by configure.  Here we exec the FD to /dev/null, effectively closing
 # config.log, so it can be properly (re)opened and appended to by config.lt.
 lt_cl_success=:
-test "$silent" = yes &&
+test yes = "$silent" &&
   lt_config_lt_args="$lt_config_lt_args --quiet"
 exec 5>/dev/null
 $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
@@ -31401,7 +32128,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by HDF5 $as_me 1.9.231, which was
+This file was extended by HDF5 $as_me 1.9.232, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -31467,7 +32194,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-HDF5 config.status 1.9.231
+HDF5 config.status 1.9.232
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
@@ -31602,6 +32329,7 @@ enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
 enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
 pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
 enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
 SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
 ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
 PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
@@ -31651,10 +32379,13 @@ compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
 GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
 nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
 lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
 objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
 MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
 lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
@@ -31719,7 +32450,8 @@ finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
 finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
 hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
 sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
 hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
 enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
 enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
@@ -31872,9 +32604,12 @@ CFLAGS \
 compiler \
 lt_cv_sys_global_symbol_pipe \
 lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
 nm_file_list_spec \
+lt_cv_truncate_bin \
 lt_prog_compiler_no_builtin_flag \
 lt_prog_compiler_pic \
 lt_prog_compiler_wl \
@@ -31965,7 +32700,7 @@ compiler_lib_search_path_CXX \
 compiler_lib_search_path_FC; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -31992,7 +32727,8 @@ postinstall_cmds \
 postuninstall_cmds \
 finish_cmds \
 sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path \
 reload_cmds_CXX \
 reload_cmds_FC \
 old_archive_cmds_CXX \
@@ -32017,7 +32753,7 @@ postlink_cmds_CXX \
 postlink_cmds_FC; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -32026,19 +32762,16 @@ postlink_cmds_FC; do
 done
 
 ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
 
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
 # commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
 
     PACKAGE='$PACKAGE'
     VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
     RM='$RM'
     ofile='$ofile'
 
@@ -32851,55 +33584,53 @@ $as_echo X"$file" |
     "fortran/src/H5config_f.inc":H) cat fortran/src/H5config_f.inc | sed '1d;s%^/\* \(.*\) \*/%\1%;s/#define /#define H5_/;s/#undef /#undef H5_/' >fortran/src/H5config_f.inc.tmp; mv -f fortran/src/H5config_f.inc.tmp fortran/src/H5config_f.inc ;;
     "libtool":C)
 
-    # See if we are running on zsh, and set the options which allow our
+    # See if we are running on zsh, and set the options that allow our
     # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
+    if test -n "${ZSH_VERSION+set}"; then
       setopt NO_GLOB_SUBST
     fi
 
-    cfgfile="${ofile}T"
+    cfgfile=${ofile}T
     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
     $RM "$cfgfile"
 
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
 #
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
 #
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 # The names of the tagged configurations supported by this script.
-available_tags="CXX FC "
+available_tags='CXX FC '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
 
 # ### BEGIN LIBTOOL CONFIG
 
@@ -32919,6 +33650,9 @@ pic_mode=$pic_mode
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
 # Shell to use when invoking shell scripts.
 SHELL=$lt_SHELL
 
@@ -33036,18 +33770,27 @@ global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 # Transform the output of nm in a proper C declaration.
 global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
 # Transform the output of nm in a C name address pair.
 global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
 # Transform the output of nm in a C name address pair when lib prefix is needed.
 global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
 # Specify filename containing input files for \$NM.
 nm_file_list_spec=$lt_nm_file_list_spec
 
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
 lt_sysroot=$lt_sysroot
 
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
@@ -33138,8 +33881,11 @@ hardcode_into_libs=$hardcode_into_libs
 # Compile-time system search path for libraries.
 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
 
 # Whether dlopen is supported.
 dlopen_support=$enable_dlopen
@@ -33232,13 +33978,13 @@ hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute
 
@@ -33304,13 +34050,72 @@ compiler_lib_search_path=$lt_compiler_lib_search_path
 
 _LT_EOF
 
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
   case $host_os in
   aix3*)
     cat <<\_LT_EOF >> "$cfgfile"
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
@@ -33319,7 +34124,7 @@ _LT_EOF
   esac
 
 
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 
 
   # We use sed instead of cat because bash on DJGPP gets confused if
@@ -33329,165 +34134,6 @@ ltmain="$ac_aux_dir/ltmain.sh"
   sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
-  if test x"$xsi_shell" = xyes; then
-  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\    # positional parameters, so assign one to ordinary parameter first.\
-\    func_stripname_result=${3}\
-\    func_stripname_result=${func_stripname_result#"${1}"}\
-\    func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\    func_split_long_opt_name=${1%%=*}\
-\    func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\    func_split_short_opt_arg=${1#??}\
-\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\    case ${1} in\
-\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\      *)    func_lo2o_result=${1} ;;\
-\    esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
-    func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
-    func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
-    func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
-    eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\    func_quote_for_eval "${2}"\
-\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
    mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
@@ -33574,13 +34220,13 @@ hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct_CXX
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute_CXX
 
@@ -33727,13 +34373,13 @@ hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_FC
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator_FC
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct_FC
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute_FC
 
diff --git a/configure.ac b/configure.ac
index 908e3c5..18601f1 100644
--- a/configure.ac
+++ b/configure.ac
@@ -26,7 +26,7 @@ AC_PREREQ([2.69])
 ## NOTE: Do not forget to change the version number here when we do a
 ## release!!!
 ##
-AC_INIT([HDF5], [1.9.231], [help@hdfgroup.org])
+AC_INIT([HDF5], [1.9.232], [help@hdfgroup.org])
 
 AC_CONFIG_SRCDIR([src/H5.c])
 AC_CONFIG_HEADERS([src/H5config.h])
@@ -40,16 +40,17 @@ AM_INIT_AUTOMAKE([foreign])
 AM_SILENT_RULES([yes])
 
 ## AM_MAINTAINER_MODE turns off "rebuild rules" that contain dependencies
-## for Makefiles, configure, src/H5config.h, etc.  If AM_MAINTAINER_MODE
-## is *not* included here, these files will be rebuilt if out of date.
-## This is a problem because if users try to build on a machine with
+## for Makefiles, configure, src/H5config.h, etc. If AM_MAINTAINER_MODE
+## is enabled, these files will be rebuilt if out of date. This is a
+## problem because if users try to build on a machine with
 ## the wrong versions of autoconf and automake, these files will be
 ## rebuilt with the wrong versions and bad things can happen.
 ## Also, CVS doesn't preserve dependencies between timestamps, so
 ## Makefiles will often think rebuilding needs to occur when it doesn't.
-## Developers should './configure --enable-maintainer-mode' to turn on
-## rebuild rules.
-AM_MAINTAINER_MODE
+##
+## By default, it is enabled. Users can configure with
+## --disable-maintainer-mode to prevent running the autotools.
+AM_MAINTAINER_MODE([enable])
 
 ## ----------------------------------------------------------------------
 ## Set prefix default (install directory) to a directory in the build area.
@@ -823,8 +824,6 @@ LT_PREREQ([2.2])
 ## win32-dll - This will build clean dlls on win32 platforms.
 LT_INIT([dlopen,win32-dll])
 
-
-
 ## ----------------------------------------------------------------------
 ## Check if we should install only statically linked executables.
 ##   This check needs to occur after libtool is initialized because
@@ -891,32 +890,6 @@ case "X-$RPATH" in
 esac
 
 ## ----------------------------------------------------------------------
-## pmake will throw an error if variables are undefined in a Makefile.
-## These errors can be changed to warnings using the -V flag.
-##
-AC_SUBST([AM_MAKEFLAGS]) AM_MAKEFLAGS=""
-
-## Don't run test if MAKE is defined but is the empty string
-if test -n "${MAKE-make}"; then
-
-  AC_MSG_CHECKING([whether make will build with undefined variables])
-
-  cat >maketest <<EOF
-foo: \$(UNDEFINED) \$(UNDEFINED2)
-	@echo \$(UNDEFINED3) works
-EOF
-
-  if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-    AC_MSG_RESULT([yes])
-  else
-    AC_MSG_RESULT([no, setting -V flag])
-    AM_MAKEFLAGS="\-V"
-  fi
-
-  rm maketest
-fi
-
-## ----------------------------------------------------------------------
 ## Production flags?  Save the value in $CONFIG_MODE so we have it for
 ## the record.
 ##
@@ -1088,17 +1061,22 @@ esac
 CPPFLAGS="$H5_CPPFLAGS $AM_CPPFLAGS $CPPFLAGS"
 CFLAGS="$H5_CFLAGS $AM_CFLAGS $CFLAGS"
 
-AC_TRY_COMPILE([#include <sys/types.h>],
-               [off64_t n = 0;],
-               [AC_CHECK_FUNCS([lseek64 fseeko64 ftello64 ftruncate64])],
-               [AC_MSG_RESULT([skipping test for lseek64(), fseeko64 , ftello64, ftruncate64() because off64_t is not defined])])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <sys/types.h>
+]],
+    [[off64_t n = 0;]])],
+    [AC_CHECK_FUNCS([lseek64 fseeko64 ftello64 ftruncate64])],
+    [AC_MSG_RESULT([skipping test for lseek64, fseeko64 , ftello64, ftruncate64 because off64_t is not defined])])
+
 AC_CHECK_FUNCS([fseeko ftello])
-AC_TRY_COMPILE([
+
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
 #include <sys/types.h>
-#include <sys/stat.h>],
-[struct stat64 sb;],
+#include <sys/stat.h>
+]],
+[[struct stat64 sb;]])],
 [AC_CHECK_FUNCS([stat64 fstat64])],
-[AC_MSG_RESULT([skipping test for stat64() and fstat64()])])
+[AC_MSG_RESULT([skipping test for stat64 and fstat64])])
 
 ## Checkpoint the cache
 AC_CACHE_SAVE
@@ -1159,17 +1137,16 @@ AC_CACHE_SAVE
 ## Check if the dev_t type is a scalar type (must come after the check for
 ## sys/types.h)
 AC_MSG_CHECKING([if dev_t is scalar])
-AC_TRY_COMPILE([
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
 #ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
 #endif
-  ],
-  [dev_t d1, d2; if(d1==d2) return 0;],
-  AC_DEFINE([DEV_T_IS_SCALAR], [1],
-            [Define if `dev_t' is a scalar])
-  AC_MSG_RESULT([yes]),
-  AC_MSG_RESULT([no])
-)
+  ]],
+  [[dev_t d1, d2; if(d1==d2) return 0;]])],
+  [AC_DEFINE([DEV_T_IS_SCALAR], [1],
+            [Define if dev_t is a scalar])
+  AC_MSG_RESULT([yes])],
+  [AC_MSG_RESULT([no])])
 
 ## ----------------------------------------------------------------------
 ## Fake --with-xxx option to allow us to create a help message for the
@@ -1663,11 +1640,12 @@ AC_CHECK_DECL([CLOCK_MONOTONIC],[have_clock_monotonic="yes"],[have_clock_monoton
 
 ## First check if `struct tm' has a `tm_gmtoff' member.
 AC_MSG_CHECKING([for tm_gmtoff in struct tm])
-AC_TRY_COMPILE([
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
   #include <sys/time.h>
-  #include <time.h>], [struct tm tm; tm.tm_gmtoff=0;],
+  #include <time.h>
+]], [[struct tm tm; tm.tm_gmtoff=0;]])],
   [AC_DEFINE([HAVE_TM_GMTOFF], [1],
-          [Define if `tm_gmtoff' is a member of `struct tm'])
+          [Define if tm_gmtoff is a member of struct tm])
     AC_MSG_RESULT([yes])],
   [AC_MSG_RESULT([no])])
 
@@ -1679,11 +1657,11 @@ case "`uname`" in
     AC_MSG_RESULT([disabled in CYGWIN])
     ;;
   *)
-    AC_TRY_LINK([
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([[
     #include <sys/time.h>
-    #include <time.h>], [timezone=0;],
+    #include <time.h>]], [[timezone=0;]])],
     [AC_DEFINE([HAVE_TIMEZONE], [1],
-              [Define if `timezone' is a global variable])
+              [Define if timezone is a global variable])
       AC_MSG_RESULT([yes])],
     [AC_MSG_RESULT([no])])
     ;;
@@ -1694,10 +1672,10 @@ esac
 ## Does the struct stat have the st_blocks field?  This field is not Posix.
 ##
 AC_MSG_CHECKING([for st_blocks in struct stat])
-AC_TRY_COMPILE([
-  #include <sys/stat.h>],[struct stat sb; sb.st_blocks=0;],
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM[[
+  #include <sys/stat.h>]],[[struct stat sb; sb.st_blocks=0;]])],
   [AC_DEFINE([HAVE_STAT_ST_BLOCKS], [1],
-          [Define if `struct stat' has the `st_blocks' field])
+          [Define if struct stat has the st_blocks field])
     AC_MSG_RESULT([yes])],
   [AC_MSG_RESULT([no])])
 
@@ -1715,28 +1693,32 @@ esac
 AC_CHECK_FUNCS([_scrsize ioctl])
 
 AC_MSG_CHECKING([for struct videoconfig])
-AC_TRY_COMPILE(,[struct videoconfig w; w.numtextcols=0;],
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],[[struct videoconfig w; w.numtextcols=0;]])],
   [AC_DEFINE([HAVE_STRUCT_VIDEOCONFIG], [1],
-          [Define if `struct videoconfig' is defined])
+          [Define if struct videoconfig is defined])
     AC_MSG_RESULT([yes])],
   [AC_MSG_RESULT([no])])
 
 AC_MSG_CHECKING([for struct text_info])
-AC_TRY_COMPILE(, [struct text_info w; w.screenwidth=0;],
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[struct text_info w; w.screenwidth=0;]])],
   [AC_DEFINE([HAVE_STRUCT_TEXT_INFO], [1],
-          [Define if `struct text_info' is defined])
+          [Define if struct text_info is defined])
     AC_MSG_RESULT([yes])],
   [AC_MSG_RESULT([no])])
 
 AC_MSG_CHECKING([for TIOCGWINSZ])
-AC_TRY_COMPILE([#include <sys/ioctl.h>],[int w=TIOCGWINSZ;],
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <sys/ioctl.h>
+]],[[int w=TIOCGWINSZ;]])],
   [AC_DEFINE([HAVE_TIOCGWINSZ], [1],
           [Define if the ioctl TIOGWINSZ is defined])
     AC_MSG_RESULT([yes])],
   [AC_MSG_RESULT([no])])
 
 AC_MSG_CHECKING([for TIOCGETD])
-AC_TRY_COMPILE([#include <sys/ioctl.h>],[int w=TIOCGETD;],
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <sys/ioctl.h>
+]],[[int w=TIOCGETD;]])],
   [AC_DEFINE([HAVE_TIOCGETD], [1],
           [Define if the ioctl TIOCGETD is defined])
     AC_MSG_RESULT([yes])],
@@ -1783,26 +1765,26 @@ AC_COMPILE_IFELSE(
 )
 
 AC_MSG_CHECKING([for __attribute__ extension])
-AC_TRY_COMPILE(,[int __attribute__((unused)) x],
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],[[int __attribute__((unused)) x]])],
                [AC_DEFINE([HAVE_ATTRIBUTE], [1],
                          [Define if the __attribute__(()) extension is present])
                  AC_MSG_RESULT([yes])],
                [AC_MSG_RESULT([no])])
 
 AC_MSG_CHECKING([for __func__ extension])
-AC_TRY_COMPILE(,[ const char *fname = __func__; ],
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],[[ const char *fname = __func__; ]])],
                [AC_DEFINE([HAVE_C99_FUNC], [1],
                          [Define if the compiler understands the __func__ keyword])
                  AC_MSG_RESULT([yes])],
                [AC_MSG_RESULT([no])])
 AC_MSG_CHECKING([for __FUNCTION__ extension])
-AC_TRY_COMPILE(,[ const char *fname = __FUNCTION__; ],
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],,[[ const char *fname = __FUNCTION__; ]])],
                [AC_DEFINE([HAVE_FUNCTION], [1],
                          [Define if the compiler understands the __FUNCTION__ keyword])
                  AC_MSG_RESULT([yes])],
                [AC_MSG_RESULT([no])])
 AC_MSG_CHECKING([for C99 designated initialization support])
-AC_TRY_COMPILE(,[
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
                 typedef struct {
                     int x;
                     union {
@@ -1810,7 +1792,7 @@ AC_TRY_COMPILE(,[
                         double d;
                     } u;
                 } di_struct_t;
-                di_struct_t x = {0, { .d = 0.0}}; ],
+                di_struct_t x = {0, { .d = 0.0}}; ]])], 
                [AC_DEFINE([HAVE_C99_DESIGNATED_INITIALIZER], [1],
                          [Define if the compiler understands C99 designated initialization of structs and unions])
                  AC_MSG_RESULT([yes])],
@@ -2172,21 +2154,23 @@ if test -n "$PARALLEL"; then
     ADD_PARALLEL_FILES="yes"
     AC_MSG_CHECKING([for MPI_Comm_c2f and MPI_Comm_f2c functions])
 
-    AC_TRY_LINK([#include <mpi.h>],
-      [MPI_Comm c_comm; MPI_Comm_c2f(c_comm)],
-      AC_DEFINE([HAVE_MPI_MULTI_LANG_Comm], [1],
-                [Define if `MPI_Comm_c2f' and `MPI_Comm_f2c' exists])
-      AC_MSG_RESULT([yes]),
-      AC_MSG_RESULT([no])
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([[
+    #include <mpi.h>
+    ]],
+      [[MPI_Comm c_comm; MPI_Comm_c2f(c_comm)]])],
+      [AC_DEFINE([HAVE_MPI_MULTI_LANG_Comm], [1],
+                 [Define if MPI_Comm_c2f and MPI_Comm_f2c exist])
+                 AC_MSG_RESULT([yes])],
+                 [AC_MSG_RESULT([no])]
     )
 
     AC_MSG_CHECKING([for MPI_Info_c2f and MPI_Info_f2c functions])
-    AC_TRY_LINK([#include <mpi.h>],
-      [MPI_Info c_info; MPI_Info_c2f(c_info)],
-      AC_DEFINE([HAVE_MPI_MULTI_LANG_Info], [1],
-                [Define if `MPI_Info_c2f' and `MPI_Info_f2c' exists])
-      AC_MSG_RESULT([yes]),
-      AC_MSG_RESULT([no])
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <mpi.h>]],
+      [[MPI_Info c_info; MPI_Info_c2f(c_info)]])],
+      [AC_DEFINE([HAVE_MPI_MULTI_LANG_Info], [1],
+                [Define if MPI_Info_c2f and MPI_Info_f2c exist])
+                AC_MSG_RESULT([yes])],
+                [AC_MSG_RESULT([no])]
     )
   fi
 
@@ -2257,10 +2241,9 @@ fi
 ## ----------------------------------------------------------------------
 ## Check if Direct I/O driver is enabled by --enable-direct-vfd
 ##
-
-## Check these regardless. If the checks are moved inside the main
-## direct VFD block, the output is nested.
-
+## ----------------------------------------------------------------------
+## Check if Direct I/O driver is enabled by --enable-direct-vfd
+##
 AC_CACHE_VAL([hdf5_cv_direct_io],
     AC_CHECK_DECL([O_DIRECT], [hdf5_cv_direct_io=yes], [hdf5_cv_direct_io=no], [[#include <fcntl.h>]]))
 AC_CACHE_VAL([hdf5_cv_posix_memalign],
@@ -2554,7 +2537,7 @@ if test ${ac_cv_sizeof_long_double} = 0; then
    hdf5_cv_ldouble_to_llong_accurate=${hdf5_cv_ldouble_to_llong_accurate=no}
 else
    AC_CACHE_VAL([hdf5_cv_ldouble_to_llong_accurate],
-        [AC_TRY_RUN([
+        [AC_RUN_IFELSE([AC_LANG_SOURCE([[
         int main(void)
         {
             long double         ld = 20041683600089727.779961L;
@@ -2591,7 +2574,7 @@ else
     done:
             exit(ret);
         }
-        ], [hdf5_cv_ldouble_to_llong_accurate=yes], [hdf5_cv_ldouble_to_llong_accurate=no],)])
+        ]])], [hdf5_cv_ldouble_to_llong_accurate=yes], [hdf5_cv_ldouble_to_llong_accurate=no],[])])
 fi
 
 if test ${hdf5_cv_ldouble_to_llong_accurate} = "yes"; then
@@ -2617,7 +2600,7 @@ if test ${ac_cv_sizeof_long_double} = 0; then
    hdf5_cv_llong_to_ldouble_correct=${hdf5_cv_llong_to_ldouble_correct=no}
 else
    AC_CACHE_VAL([hdf5_cv_llong_to_ldouble_correct],
-        [AC_TRY_RUN([
+        [AC_RUN_IFELSE([AC_LANG_SOURCE([[
         int main(void)
         {
             long double         ld;
@@ -2658,7 +2641,7 @@ else
     done:
             exit(ret);
         }
-        ], [hdf5_cv_llong_to_ldouble_correct=yes], [hdf5_cv_llong_to_ldouble_correct=no],)])
+        ]])],[hdf5_cv_llong_to_ldouble_correct=yes], [hdf5_cv_llong_to_ldouble_correct=no],[])]) 
 fi
 
 if test ${hdf5_cv_llong_to_ldouble_correct} = "yes"; then
diff --git a/examples/Makefile.in b/examples/Makefile.in
index 7152bd2..1b3520b 100644
--- a/examples/Makefile.in
+++ b/examples/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -35,7 +35,17 @@
 # built using h5cc (or h5fc, etc.) instead of the standard compilers.
 # This creates some extra work for us.
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -98,20 +108,18 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/examples.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/run-c-ex.sh.in $(srcdir)/testh5cc.sh.in \
-	$(top_srcdir)/bin/test-driver README
 TESTS = $(TEST_SCRIPT)
 subdir = examples
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/H5config.h \
 	$(top_builddir)/fortran/src/H5config_f.inc
 CONFIG_CLEAN_FILES = run-c-ex.sh testh5cc.sh
@@ -336,6 +344,11 @@ am__set_b = \
     *) \
       b='$*';; \
   esac
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/run-c-ex.sh.in \
+	$(srcdir)/testh5cc.sh.in $(top_srcdir)/bin/test-driver \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am \
+	$(top_srcdir)/config/examples.am README
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
@@ -352,7 +365,6 @@ AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
 AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -450,6 +462,7 @@ LL_PATH = @LL_PATH@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_STATIC_EXEC = @LT_STATIC_EXEC@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -706,7 +719,6 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign examples/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign examples/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -715,7 +727,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am:
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am $(am__empty):
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
@@ -772,7 +784,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	if test -n "$$am__remaking_logs"; then \
 	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 	       "recursion detected" >&2; \
-	else \
+	elif test -n "$$redo_logs"; then \
 	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 	fi; \
 	if $(am__make_dryrun); then :; else \
@@ -1040,6 +1052,8 @@ uninstall-am: uninstall-local
 	pdf-am ps ps-am recheck tags-am uninstall uninstall-am \
 	uninstall-local
 
+.PRECIOUS: Makefile
+
 
 # List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
 # This tells the Makefiles that these targets are not files to be built but
diff --git a/fortran/Makefile.in b/fortran/Makefile.in
deleted file mode 100644
index ca2ea6d..0000000
--- a/fortran/Makefile.in
+++ /dev/null
@@ -1,1394 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# This makefile mostly just reinvokes make in the various subdirectories
-# but does so in the correct order.  You can alternatively invoke make from
-# each subdirectory manually.
-#
-# Top-level HDF5-Fortran Makefile(.in)
-#
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver COPYING
-TESTS =
-subdir = fortran
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	check recheck distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-@BUILD_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar
-
-# Subdirectories in build order, not including examples directory
-@BUILD_FORTRAN_CONDITIONAL_TRUE@SUBDIRS = src test $(TESTPARALLEL_DIR)
-
-# All directories that have Makefiles
-DIST_SUBDIRS = src test testpar examples
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign fortran/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign fortran/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
-all-am: Makefile all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) check-am install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
-	check check-TESTS check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installcheck-local installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Install examples
-install-examples uninstall-examples:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-installcheck-local:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-# Clean examples when check-clean is invoked
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS) examples; do                                   \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in
deleted file mode 100644
index de02876..0000000
--- a/fortran/examples/Makefile.in
+++ /dev/null
@@ -1,1369 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5-Fortran Examples Makefile(.in)
-#
-
-# We can't tell automake about example programs, because they need to be
-# built using h5cc (or h5fc, etc.) instead of the standard compilers.
-# This creates some extra work for us.
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/examples.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/run-fortran-ex.sh.in $(srcdir)/testh5fc.sh.in \
-	$(top_srcdir)/bin/test-driver
-TESTS = $(TEST_SCRIPT)
-subdir = fortran/examples
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = run-fortran-ex.sh testh5fc.sh
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
-
-# Compile parallel fortran examples only if parallel is enabled
-@BUILD_PARALLEL_CONDITIONAL_TRUE@EXAMPLE_PROG_PARA = ph5example
-INSTALL_SCRIPT_FILES = run-fortran-ex.sh
-
-# These are the programs that 'make all' or 'make tests' will build and
-# that 'make check' will run.  List them in the order in which they should
-# be run.
-# We don't tell automake about these programs so that it doesn't try to
-# compile them with the regular fortran compiler.
-
-# Add attention tests for Fortran 2003 features
-EXAMPLE_PROG = h5_crtdat h5_rdwt h5_crtatt h5_crtgrp h5_crtgrpar \
-	h5_crtgrpd h5_extend h5_subset h5_cmprss hyperslab selectele \
-	refobjexample refregexample mountexample compound \
-	rwdset_fortran2003 nested_derived_type compound_fortran2003 \
-	compound_complex_fortran2003
-
-# List files to be installed here
-INSTALL_FILES = h5_crtdat.f90 h5_rdwt.f90 h5_crtatt.f90 h5_crtgrp.f90 \
-	h5_crtgrpar.f90 h5_crtgrpd.f90 h5_extend.f90 h5_subset.f90 \
-	h5_cmprss.f90 hyperslab.f90 selectele.f90 refobjexample.f90 \
-	refregexample.f90 mountexample.f90 compound.f90 ph5example.f90 \
-	rwdset_fortran2003.f90 nested_derived_type.f90 \
-	compound_fortran2003.f90 compound_complex_fortran2003.f90
-TEST_SCRIPT = testh5fc.sh
-TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
-
-# Mark this directory as part of the Fortran API
-FORTRAN_API = yes
-
-# Tell automake how to install examples
-# Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/fortran
-EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples
-
-# Assume that all tests in this directory are examples, and tell
-# conclude.am when to build them.
-EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# We need to tell automake what to clean
-MOSTLYCLEANFILES = *.raw *.meta *.o
-CLEANFILES = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .f90 .log .o .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign fortran/examples/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign fortran/examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-run-fortran-ex.sh: $(top_builddir)/config.status $(srcdir)/run-fortran-ex.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-testh5fc.sh: $(top_builddir)/config.status $(srcdir)/testh5fc.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am all-local check check-TESTS check-am clean \
-	clean-generic clean-libtool cscopelist-am ctags-am distclean \
-	distclean-generic distclean-libtool distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-data-local install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installcheck-local installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags-am uninstall uninstall-am \
-	uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Some examples depend on files created by other examples.
-h5_crtgrpd.chkexe_: h5_crtgrpar.chkexe_
-refregexample.chkexe_: refobjexample.chkexe_
-# h5_rdwt and h5_crtatt both modify the same file created by
-# h5_crtdat. Serialize them.
-h5_rdwt.chkexe_: h5_crtdat.chkexe_
-h5_crtatt.chkexe_: h5_rdwt.chkexe_
-
-# Tell automake how to build examples using h5fc
-# Additional dependencies for the examples are listed below
-@BUILD_PARALLEL_CONDITIONAL_TRUE@$(EXTRA_PROG): $(H5FC_PP)
-@BUILD_PARALLEL_CONDITIONAL_TRUE@	$(H5FC_PP) $(H5CCFLAGS) $(FCFLAGS) -o $@ $(srcdir)/$@.f90;
-@BUILD_PARALLEL_CONDITIONAL_FALSE@$(EXTRA_PROG): $(H5FC)
-@BUILD_PARALLEL_CONDITIONAL_FALSE@	$(H5FC) $(H5CCFLAGS) $(FCFLAGS) -o $@ $(srcdir)/$@.f90;
-
-# List dependencies for each example.  Normally, automake would take
-# care of this for us, but if we tell automake about the programs it
-# will try to build them with the normal C compiler, not h5cc.  This is
-# an inelegant way of solving the problem.
-# All programs share the same build rule and a dependency on the main hdf5
-# and fortran libraries above.
-h5_crtdat: h5_crtdat.f90
-h5_extend: h5_extend.f90
-h5_subset: h5_subset.f90
-h5_rdwt: h5_rdwt.f90
-h5_crtatt: h5_crtatt.f90
-h5_crtgrp: h5_crtgrp.f90
-h5_crtgrpar: h5_crtgrpar.f90
-h5_crtgrpd: h5_crtgrpd.f90
-h5_cmprss: h5_cmprss.f90
-hyperslab: hyperslab.f90
-selectele: selectele.f90
-refobjexample: refobjexample.f90
-refregexample: refregexample.f90
-mountexample: mountexample.f90
-compound: compound.f90
-ph5example: ph5example.f90
-rwdset_fortran2003: rwdset_fortran2003.f90
-nested_derived_type: nested_derived_type.f90
-compound_fortran2003: compound_fortran2003.f90
-compound_complex_fortran2003: compound_complex_fortran2003.f90
-
-# How to create EXAMPLEDIR if it doesn't already exist
-$(EXAMPLEDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-$(EXAMPLETOPDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-
-# Install and uninstall rules.  We install the source files, not the
-# example programs themselves.
-install-data-local:
-	@$(MAKE) $(AM_MAKEFLAGS) install-examples
-uninstall-local:
-	@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
-
-install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) 
-	@for f in X $(INSTALL_FILES); do                                     \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);    \
-            chmod a-x $(EXAMPLEDIR)/$$f;                                     \
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_SCRIPT_FILES); do                                   \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-            chmod a-x $(EXAMPLETOPDIR)/$$f;\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_SCRIPT_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-	  fi;                                                                \
-	done
-
-uninstall-examples:
-	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then             \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES);                \
-	fi
-	@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then           \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES);              \
-	fi
-	@if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES);       \
-	fi
-	@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES);       \
-	fi
-
-installcheck-local:
-	@if test "$(STATIC_SHARED)" = "static, shared"; then               \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	  $(MAKE) $(AM_MAKEFLAGS) clean;                                   \
-	  H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check;                      \
-	elif test "$(STATIC_SHARED)" = "shared"; then                     \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	else                                                              \
-	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	fi 
-	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
-	    echo "============================";                                         \
-	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
-	    echo "============================";                                         \
-	    (cd $(EXAMPLEDIR);                                                           \
-	     /bin/sh ./$(TEST_EXAMPLES_SCRIPT);)                                                   \
-	fi
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fortran/src/H5f90proto.h b/fortran/src/H5f90proto.h
index 1d08d7e..f8b4564 100644
--- a/fortran/src/H5f90proto.h
+++ b/fortran/src/H5f90proto.h
@@ -196,6 +196,8 @@ H5_FCDLL int_f h5gget_info_by_name_c(hid_t_f *loc_id, _fcd group_name, size_t_f
 
 H5_FCDLL int_f h5awrite_f_c(hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf);
 H5_FCDLL int_f h5aread_f_c(hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf);
+H5_FCDLL int_f h5acreate_c(hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *type_id,
+                        hid_t_f *space_id, hid_t_f *crt_prp, hid_t_f *aapl, hid_t_f *attr_id);
 H5_FCDLL int_f h5adelete_c(hid_t_f *obj_id, _fcd name, size_t_f *namelen);
 H5_FCDLL int_f h5aget_num_attrs_c(hid_t_f *obj_id, int_f *attr_num);
 H5_FCDLL int_f h5aget_name_c(hid_t_f *attr_id, size_t_f *size, _fcd buf);
diff --git a/fortran/src/H5match_types.c b/fortran/src/H5match_types.c
index 37509a0..f995e83 100644
--- a/fortran/src/H5match_types.c
+++ b/fortran/src/H5match_types.c
@@ -149,8 +149,6 @@ int main(void)
 {
   int FoundIntSize[10];
   int FoundIntSizeKind[10];
-  int FoundRealSize[10];
-  int FoundRealSizeKind[10];
   int i, j,flag;
   char chrA[32],chrB[32];
 
@@ -382,16 +380,8 @@ int main(void)
 /* it a value of the next larger one, but if the next         */
 /* higher one is not available we assigned it the next lowest */
 
-  FoundRealSize[0] = -1;
-  FoundRealSize[1] = -1;
-  FoundRealSize[2] = -1;
-  FoundRealSize[3] = -1;
-  FoundRealSize[4] = -1;
-  
   for(i=0;i<H5_FORTRAN_NUM_REAL_KINDS;i++) {
     if (RealKinds[i] > 0) {
-      FoundRealSize[i] = (int)RealKinds[i];
-      FoundRealSizeKind[i] = (int)RealKinds_SizeOf[i];	
       sprintf(chrA, "Fortran_REAL_%s", Real_C_TYPES[i]);
       sprintf(chrB, "real_%s_f", Real_C_TYPES[i]);
       writeToFiles("float",chrA, chrB, RealKinds[i], RealKinds_SizeOf[i]);
diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in
deleted file mode 100644
index 957a76d..0000000
--- a/fortran/src/Makefile.in
+++ /dev/null
@@ -1,1630 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Fortran Library Makefile(.in)
-#
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/lt_vers.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(srcdir)/H5config_f.inc.in \
-	$(top_srcdir)/bin/mkinstalldirs $(srcdir)/h5fc.in \
-	$(srcdir)/H5fort_type_defines.h.in $(top_srcdir)/bin/depcomp \
-	$(top_srcdir)/bin/test-driver README
-
-# Some Fortran compilers can't build shared libraries, so sometimes we
-# want to build a shared C library and a static Fortran library.  If so,
-# pass the -static flag to the library linker.
-@FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static
-noinst_PROGRAMS = H5match_types$(EXEEXT) H5_buildiface$(EXEEXT)
-TESTS =
-subdir = fortran/src
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h H5config_f.inc
-CONFIG_CLEAN_FILES = h5fc H5fort_type_defines.h
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(libdir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libhdf5_fortran_la_DEPENDENCIES = $(LIBHDF5)
-am_libhdf5_fortran_la_OBJECTS = H5f90global.lo H5fortran_types.lo \
-	H5_ff.lo H5Aff.lo H5Dff.lo H5Eff.lo H5Fff.lo H5Gff.lo H5Iff.lo \
-	H5Lff.lo H5Off.lo H5Pff.lo H5Rff.lo H5Sff.lo H5Tff.lo H5Zff.lo \
-	H5_gen.lo H5f90kit.lo H5_f.lo H5Af.lo H5Df.lo H5Ef.lo H5Ff.lo \
-	H5Gf.lo H5If.lo H5Lf.lo H5Of.lo H5Pf.lo H5Rf.lo H5Sf.lo \
-	H5Tf.lo H5Zf.lo HDF5.lo
-libhdf5_fortran_la_OBJECTS = $(am_libhdf5_fortran_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-libhdf5_fortran_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=FC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(FCLD) \
-	$(AM_FCFLAGS) $(FCFLAGS) $(libhdf5_fortran_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
-PROGRAMS = $(noinst_PROGRAMS)
-am_H5_buildiface_OBJECTS = H5_buildiface.$(OBJEXT)
-H5_buildiface_OBJECTS = $(am_H5_buildiface_OBJECTS)
-H5_buildiface_LDADD = $(LDADD)
-H5match_types_SOURCES = H5match_types.c
-H5match_types_OBJECTS = H5match_types.$(OBJEXT)
-H5match_types_LDADD = $(LDADD)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-AM_V_PPFC = $(am__v_PPFC_@AM_V@)
-am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@)
-am__v_PPFC_0 = @echo "  PPFC    " $@;
-am__v_PPFC_1 = 
-FCLD = $(FC)
-FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_FCLD = $(am__v_FCLD_@AM_V@)
-am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@)
-am__v_FCLD_0 = @echo "  FCLD    " $@;
-am__v_FCLD_1 = 
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-FCCOMPILE = $(FC) $(AM_FCFLAGS) $(FCFLAGS)
-LTFCCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(FC) $(AM_FCFLAGS) $(FCFLAGS)
-AM_V_FC = $(am__v_FC_@AM_V@)
-am__v_FC_ = $(am__v_FC_@AM_DEFAULT_V@)
-am__v_FC_0 = @echo "  FC      " $@;
-am__v_FC_1 = 
-SOURCES = $(libhdf5_fortran_la_SOURCES) $(H5_buildiface_SOURCES) \
-	H5match_types.c
-DIST_SOURCES = $(libhdf5_fortran_la_SOURCES) $(H5_buildiface_SOURCES) \
-	H5match_types.c
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
-	$(LISP)H5config_f.inc.in
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src directory in both Fortran and C flags (C compiler is used
-# for linking).
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/fortran/src
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1)
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# Add libtool shared library version numbers to the HDF5 library
-# See libtool versioning documentation online.
-# After making changes, run bin/reconfigure to update other configure related
-# files like Makefile.in.
-LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 221
-LT_VERS_AGE = 0
-AM_FCLIBS = $(LIBHDF5)
-
-# This is our main target, the fortran library
-lib_LTLIBRARIES = libhdf5_fortran.la
-
-# Add libtool numbers to the HDF5 Fortran library (from config/lt_vers.am)
-libhdf5_fortran_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVISION):$(LT_VERS_AGE) $(AM_LDFLAGS)
-
-# Source files for the library.
-libhdf5_fortran_la_SOURCES = H5f90global.F90 \
-          H5fortran_types.F90 H5_ff.F90 H5Aff.F90 H5Dff.F90 H5Eff.F90    \
-          H5Fff.F90 H5Gff.F90 H5Iff.F90 H5Lff.F90 H5Off.F90 H5Pff.F90 H5Rff.F90 H5Sff.F90    \
-          H5Tff.F90 H5Zff.F90 H5_gen.f90 \
-          H5f90kit.c H5_f.c H5Af.c H5Df.c H5Ef.c H5Ff.c H5Gf.c           \
-          H5If.c H5Lf.c H5Of.c H5Pf.c H5Rf.c H5Sf.c H5Tf.c H5Zf.c HDF5.f90
-
-
-# HDF5 Fortran library depends on HDF5 Library. 
-libhdf5_fortran_la_LIBADD = $(LIBHDF5)
-
-# h5fc is generated during configure.
-# Remove it only when distclean.
-DISTCLEANFILES = h5fc
-
-# H5fortran_types.F90 and H5f90i.h are automatically generaed by
-# H5match_types, and must be cleaned explicitly.
-MOSTLYCLEANFILES = H5fortran_types.F90 H5f90i_gen.h
-@BUILD_PARALLEL_CONDITIONAL_FALSE@H5FC_NAME = h5fc
-
-# Custom rule for installing h5fc, since it will be named h5pfc if hdf5
-# is configured for parallel mode
-@BUILD_PARALLEL_CONDITIONAL_TRUE@H5FC_NAME = h5pfc
-
-# Tell Automake to create H5f90i_gen.h before it builds the library
-# sources.  When it creates H5f90i_gen.h, it will create
-# H5fortran_types.F90 as a side effect.
-BUILT_SOURCES = H5f90i_gen.h
-
-# H5_buildiface.F90 is included in the distribution, and Automake knows
-# how to compile a fortran program given its sources.
-H5_buildiface_SOURCES = H5_buildiface.F90
-
-# Mark this directory as part of the Fortran API
-FORTRAN_API = yes
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: $(BUILT_SOURCES) H5config_f.inc
-	$(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign fortran/src/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign fortran/src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-H5config_f.inc: stamp-h2
-	@test -f $@ || rm -f stamp-h2
-	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h2
-
-stamp-h2: $(srcdir)/H5config_f.inc.in $(top_builddir)/config.status
-	@rm -f stamp-h2
-	cd $(top_builddir) && $(SHELL) ./config.status fortran/src/H5config_f.inc
-
-distclean-hdr:
-	-rm -f H5config_f.inc stamp-h2
-h5fc: $(top_builddir)/config.status $(srcdir)/h5fc.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-H5fort_type_defines.h: $(top_builddir)/config.status $(srcdir)/H5fort_type_defines.h.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-	}
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	test -z "$$locs" || { \
-	  echo rm -f $${locs}; \
-	  rm -f $${locs}; \
-	}
-
-libhdf5_fortran.la: $(libhdf5_fortran_la_OBJECTS) $(libhdf5_fortran_la_DEPENDENCIES) $(EXTRA_libhdf5_fortran_la_DEPENDENCIES) 
-	$(AM_V_FCLD)$(libhdf5_fortran_la_LINK) -rpath $(libdir) $(libhdf5_fortran_la_OBJECTS) $(libhdf5_fortran_la_LIBADD) $(LIBS)
-
-clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-H5_buildiface$(EXEEXT): $(H5_buildiface_OBJECTS) $(H5_buildiface_DEPENDENCIES) $(EXTRA_H5_buildiface_DEPENDENCIES) 
-	@rm -f H5_buildiface$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(H5_buildiface_OBJECTS) $(H5_buildiface_LDADD) $(LIBS)
-
-H5match_types$(EXEEXT): $(H5match_types_OBJECTS) $(H5match_types_DEPENDENCIES) $(EXTRA_H5match_types_DEPENDENCIES) 
-	@rm -f H5match_types$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(H5match_types_OBJECTS) $(H5match_types_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Af.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Df.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ef.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ff.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Gf.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5If.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Lf.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Of.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Pf.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Rf.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Sf.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tf.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Zf.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5_f.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5f90kit.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5match_types.Po@am__quote@
-
-.F90.obj:
-	$(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.F90.lo:
-	$(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $<
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-.f90.obj:
-	$(AM_V_FC)$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) `$(CYGPATH_W) '$<'`
-
-.f90.lo:
-	$(AM_V_FC)$(LTFCCOMPILE) -c -o $@ $(FCFLAGS_f90) $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) H5config_f.inc all-local
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \
-	clean-noinstPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-local distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-exec-local install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic \
-	maintainer-clean-local
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-libLTLIBRARIES uninstall-local
-
-.MAKE: all check check-am install install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-generic clean-libLTLIBRARIES \
-	clean-libtool clean-local clean-noinstPROGRAMS cscopelist-am \
-	ctags ctags-am distclean distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-local distclean-tags \
-	distdir dvi dvi-am html html-am info info-am install \
-	install-am install-data install-data-am install-data-local \
-	install-dvi install-dvi-am install-exec install-exec-am \
-	install-exec-local install-html install-html-am install-info \
-	install-info-am install-libLTLIBRARIES install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic maintainer-clean-local mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
-	uninstall uninstall-am uninstall-libLTLIBRARIES \
-	uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-# Fortran module files can have different extensions and different names
-# (e.g., different capitalizations) on different platforms.  Write rules
-# for them explicitly rather than trying to teach automake about them.
-# They should be installed as headers and removed during clean.
-maintainer-clean-local: clean-local
-distclean-local: clean-local
-clean-local:
-	@if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
-	  $(RM) *.$(F9XMODEXT);                                         \
-	fi
-
-install-data-local:
-	@if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
-	  $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(DESTDIR)$(includedir)/. ; \
-	fi
-	$(CP) $(top_builddir)/$(subdir)/H5f90i_gen.h $(DESTDIR)$(includedir)/.
-	$(CP) $(top_srcdir)/fortran/src/H5f90i.h $(DESTDIR)$(includedir)/.
-
-uninstall-local:
-	@if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then      \
-	  if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(includedir)/HDF5.$(F9XMODEXT)"; then \
-	    set -x; $(RM) $(DESTDIR)$(includedir)/*.$(F9XMODEXT);                 \
-	  fi;                                                           \
-	fi;								\
-	$(RM) $(DESTDIR)$(bindir)/$(H5FC_NAME)
-	$(RM) $(DESTDIR)$(includedir)/H5f90i*.h
-
-# Also install and uninstall (uninstall-local above) h5fc script
-install-exec-local:
-	@$(INSTALL) h5fc $(DESTDIR)$(bindir)/$(H5FC_NAME)
-
-#Specify what Automake needs to create: first the H5fort_type_defines.h
-# header, then H5match_types which includes that header, then
-# it needs to run H5match_types.
-H5fortran_types.F90 H5f90i_gen.h: H5match_types$(EXEEXT)
-	$(RUNSERIAL) ./H5match_types$(EXEEXT)
-
-# H5_buildiface.F90 generates all the APIs that have a KIND type associated
-# with them.
-
-H5_gen.F90: H5_buildiface$(EXEEXT)
-	$(RUNSERIAL) ./H5_buildiface$(EXEEXT)
-
-# Hardcode the dependencies of these files. There isn't a known way of
-# determining this automagically (like we do with the C files). So, when
-# doing a parallel make, some modules could be made way before the
-# modules they depend upon are actually made. *sigh*
-H5f90global.lo:      $(srcdir)/H5f90global.F90 H5fortran_types.lo
-H5_buildiface.lo:    $(srcdir)/H5_buildiface.F90
-H5_ff.lo:            $(srcdir)/H5_ff.F90 H5f90global.lo
-H5Aff.lo:            $(srcdir)/H5Aff.F90 H5f90global.lo
-H5Dff.lo:            $(srcdir)/H5Dff.F90 H5f90global.lo
-H5Eff.lo:            $(srcdir)/H5Eff.F90 H5f90global.lo
-H5Fff.lo:            $(srcdir)/H5Fff.F90 H5f90global.lo
-H5Gff.lo:            $(srcdir)/H5Gff.F90 H5f90global.lo
-H5Iff.lo:            $(srcdir)/H5Iff.F90 H5f90global.lo
-H5Lff.lo:            $(srcdir)/H5Lff.F90 H5f90global.lo
-H5Off.lo:            $(srcdir)/H5Off.F90 H5f90global.lo
-H5Pff.lo:            $(srcdir)/H5Pff.F90 H5f90global.lo
-H5Rff.lo:            $(srcdir)/H5Rff.F90 H5f90global.lo
-H5Sff.lo:            $(srcdir)/H5Sff.F90 H5f90global.lo
-H5Tff.lo:            $(srcdir)/H5Tff.F90 H5f90global.lo
-H5Zff.lo:            $(srcdir)/H5Zff.F90 H5f90global.lo
-H5_gen.lo:           H5_gen.F90 H5f90global.lo H5Aff.lo H5Dff.lo H5Pff.lo
-HDF5.lo:             $(srcdir)/HDF5.F90 H5f90global.lo H5_ff.lo H5Aff.lo  \
-                     H5Dff.lo \
-                     H5Eff.lo \
-		     H5Fff.lo H5Gff.lo H5Iff.lo H5Lff.lo \
-	             H5Off.lo H5Pff.lo H5Rff.lo \
-                     H5Sff.lo H5Tff.lo H5Zff.lo H5_gen.lo
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in
deleted file mode 100644
index 38aacf2..0000000
--- a/fortran/test/Makefile.in
+++ /dev/null
@@ -1,1564 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
-
-# Some Fortran compilers can't build shared libraries, so sometimes we
-# want to build a shared C library and a static Fortran library.  If so,
-# pass the -static flag to the library linker.
-@FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static
-check_PROGRAMS = $(am__EXEEXT_1)
-noinst_PROGRAMS = H5_test_buildiface$(EXEEXT)
-TESTS = $(am__EXEEXT_1)
-subdir = fortran/test
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-libh5test_fortran_la_LIBADD =
-am_libh5test_fortran_la_OBJECTS = tf_gen.lo tf.lo t.lo
-libh5test_fortran_la_OBJECTS = $(am_libh5test_fortran_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-am__EXEEXT_1 = fortranlib_test$(EXEEXT) fflush1$(EXEEXT) \
-	fflush2$(EXEEXT) fortranlib_test_1_8$(EXEEXT) \
-	fortranlib_test_F03$(EXEEXT)
-PROGRAMS = $(noinst_PROGRAMS)
-am_H5_test_buildiface_OBJECTS = H5_test_buildiface.$(OBJEXT)
-H5_test_buildiface_OBJECTS = $(am_H5_test_buildiface_OBJECTS)
-H5_test_buildiface_DEPENDENCIES =
-am_fflush1_OBJECTS = fflush1.$(OBJEXT)
-fflush1_OBJECTS = $(am_fflush1_OBJECTS)
-fflush1_LDADD = $(LDADD)
-fflush1_DEPENDENCIES = libh5test_fortran.la $(LIBH5TEST) $(LIBH5F) \
-	$(LIBHDF5)
-am_fflush2_OBJECTS = fflush2.$(OBJEXT)
-fflush2_OBJECTS = $(am_fflush2_OBJECTS)
-fflush2_LDADD = $(LDADD)
-fflush2_DEPENDENCIES = libh5test_fortran.la $(LIBH5TEST) $(LIBH5F) \
-	$(LIBHDF5)
-am_fortranlib_test_OBJECTS = tH5F.$(OBJEXT) tH5D.$(OBJEXT) \
-	tH5R.$(OBJEXT) tH5S.$(OBJEXT) tH5T.$(OBJEXT) tH5VL.$(OBJEXT) \
-	tH5Z.$(OBJEXT) tH5Sselect.$(OBJEXT) tH5P.$(OBJEXT) \
-	tH5A.$(OBJEXT) tH5I.$(OBJEXT) tH5G.$(OBJEXT) tH5E.$(OBJEXT) \
-	tHDF5.$(OBJEXT) fortranlib_test.$(OBJEXT)
-fortranlib_test_OBJECTS = $(am_fortranlib_test_OBJECTS)
-fortranlib_test_LDADD = $(LDADD)
-fortranlib_test_DEPENDENCIES = libh5test_fortran.la $(LIBH5TEST) \
-	$(LIBH5F) $(LIBHDF5)
-am_fortranlib_test_1_8_OBJECTS = tH5O.$(OBJEXT) tH5A_1_8.$(OBJEXT) \
-	tH5G_1_8.$(OBJEXT) tH5MISC_1_8.$(OBJEXT) tHDF5_1_8.$(OBJEXT) \
-	fortranlib_test_1_8.$(OBJEXT)
-fortranlib_test_1_8_OBJECTS = $(am_fortranlib_test_1_8_OBJECTS)
-fortranlib_test_1_8_LDADD = $(LDADD)
-fortranlib_test_1_8_DEPENDENCIES = libh5test_fortran.la $(LIBH5TEST) \
-	$(LIBH5F) $(LIBHDF5)
-am_fortranlib_test_F03_OBJECTS = tH5E_F03.$(OBJEXT) tH5F_F03.$(OBJEXT) \
-	tH5L_F03.$(OBJEXT) tH5O_F03.$(OBJEXT) tH5P_F03.$(OBJEXT) \
-	tH5T_F03.$(OBJEXT) tHDF5_F03.$(OBJEXT) \
-	fortranlib_test_F03.$(OBJEXT)
-fortranlib_test_F03_OBJECTS = $(am_fortranlib_test_F03_OBJECTS)
-fortranlib_test_F03_LDADD = $(LDADD)
-fortranlib_test_F03_DEPENDENCIES = libh5test_fortran.la $(LIBH5TEST) \
-	$(LIBH5F) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-AM_V_PPFC = $(am__v_PPFC_@AM_V@)
-am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@)
-am__v_PPFC_0 = @echo "  PPFC    " $@;
-am__v_PPFC_1 = 
-FCLD = $(FC)
-FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_FCLD = $(am__v_FCLD_@AM_V@)
-am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@)
-am__v_FCLD_0 = @echo "  FCLD    " $@;
-am__v_FCLD_1 = 
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = $(libh5test_fortran_la_SOURCES) \
-	$(H5_test_buildiface_SOURCES) $(fflush1_SOURCES) \
-	$(fflush2_SOURCES) $(fortranlib_test_SOURCES) \
-	$(fortranlib_test_1_8_SOURCES) $(fortranlib_test_F03_SOURCES)
-DIST_SOURCES = $(libh5test_fortran_la_SOURCES) \
-	$(H5_test_buildiface_SOURCES) $(fflush1_SOURCES) \
-	$(fflush2_SOURCES) $(fortranlib_test_SOURCES) \
-	$(fortranlib_test_1_8_SOURCES) $(fortranlib_test_F03_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_builddir)/fortran/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-
-# Include files
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ -I$(top_builddir)/fortran/src \
-	$(F9XMODFLAG)$(top_builddir)/fortran/src
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1)
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.raw
-
-# The Fortran test library
-noinst_LTLIBRARIES = libh5test_fortran.la
-
-# Our main targets, the tests themselves
-TEST_PROG = fortranlib_test fflush1 fflush2 fortranlib_test_1_8 fortranlib_test_F03
-libh5test_fortran_la_SOURCES = tf_gen.F90 tf.F90  t.c
-fortranlib_test_SOURCES = tH5F.F90 tH5D.F90 tH5R.F90 tH5S.F90 tH5T.F90 tH5VL.F90 tH5Z.F90 \
-        tH5Sselect.F90 tH5P.F90 tH5A.F90 tH5I.F90 tH5G.F90 tH5E.F90 tHDF5.F90 fortranlib_test.F90
-
-fortranlib_test_1_8_SOURCES = tH5O.F90 tH5A_1_8.F90 tH5G_1_8.F90 tH5MISC_1_8.F90 tHDF5_1_8.F90 \
-        fortranlib_test_1_8.F90
-
-fortranlib_test_F03_SOURCES = tH5E_F03.F90 tH5F_F03.F90 tH5L_F03.F90 \
-        tH5O_F03.F90 tH5P_F03.F90 tH5T_F03.F90 tHDF5_F03.F90 fortranlib_test_F03.F90
-
-fflush1_SOURCES = fflush1.F90
-fflush2_SOURCES = fflush2.F90
-
-# The tests depend on both fortran libraries and both main libraries.
-LDADD = libh5test_fortran.la $(LIBH5TEST) $(LIBH5F) $(LIBHDF5)
-MOSTLYCLEANFILES = *.tmp
-
-# Mark this directory as part of the Fortran API (this affects output
-# from tests in conclude.am)
-FORTRAN_API = yes
-
-# H5_test_buildiface.F90 is included in the distribution, and Automake knows
-# how to compile a fortran program given its sources.
-H5_test_buildiface_SOURCES = H5_test_buildiface.F90
-
-# The build of the H5_test_buildiface does depend on any libraries, so set it 
-# to nothing.
-H5_test_buildiface_LDADD = 
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign fortran/test/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign fortran/test/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-	@list='$(noinst_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	test -z "$$locs" || { \
-	  echo rm -f $${locs}; \
-	  rm -f $${locs}; \
-	}
-
-libh5test_fortran.la: $(libh5test_fortran_la_OBJECTS) $(libh5test_fortran_la_DEPENDENCIES) $(EXTRA_libh5test_fortran_la_DEPENDENCIES) 
-	$(AM_V_FCLD)$(FCLINK)  $(libh5test_fortran_la_OBJECTS) $(libh5test_fortran_la_LIBADD) $(LIBS)
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-H5_test_buildiface$(EXEEXT): $(H5_test_buildiface_OBJECTS) $(H5_test_buildiface_DEPENDENCIES) $(EXTRA_H5_test_buildiface_DEPENDENCIES) 
-	@rm -f H5_test_buildiface$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(H5_test_buildiface_OBJECTS) $(H5_test_buildiface_LDADD) $(LIBS)
-
-fflush1$(EXEEXT): $(fflush1_OBJECTS) $(fflush1_DEPENDENCIES) $(EXTRA_fflush1_DEPENDENCIES) 
-	@rm -f fflush1$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(fflush1_OBJECTS) $(fflush1_LDADD) $(LIBS)
-
-fflush2$(EXEEXT): $(fflush2_OBJECTS) $(fflush2_DEPENDENCIES) $(EXTRA_fflush2_DEPENDENCIES) 
-	@rm -f fflush2$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(fflush2_OBJECTS) $(fflush2_LDADD) $(LIBS)
-
-fortranlib_test$(EXEEXT): $(fortranlib_test_OBJECTS) $(fortranlib_test_DEPENDENCIES) $(EXTRA_fortranlib_test_DEPENDENCIES) 
-	@rm -f fortranlib_test$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(fortranlib_test_OBJECTS) $(fortranlib_test_LDADD) $(LIBS)
-
-fortranlib_test_1_8$(EXEEXT): $(fortranlib_test_1_8_OBJECTS) $(fortranlib_test_1_8_DEPENDENCIES) $(EXTRA_fortranlib_test_1_8_DEPENDENCIES) 
-	@rm -f fortranlib_test_1_8$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(fortranlib_test_1_8_OBJECTS) $(fortranlib_test_1_8_LDADD) $(LIBS)
-
-fortranlib_test_F03$(EXEEXT): $(fortranlib_test_F03_OBJECTS) $(fortranlib_test_F03_DEPENDENCIES) $(EXTRA_fortranlib_test_F03_DEPENDENCIES) 
-	@rm -f fortranlib_test_F03$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(fortranlib_test_F03_OBJECTS) $(fortranlib_test_F03_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t.Plo@am__quote@
-
-.F90.obj:
-	$(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.F90.lo:
-	$(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $<
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-fortranlib_test.log: fortranlib_test$(EXEEXT)
-	@p='fortranlib_test$(EXEEXT)'; \
-	b='fortranlib_test'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-fflush1.log: fflush1$(EXEEXT)
-	@p='fflush1$(EXEEXT)'; \
-	b='fflush1'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-fflush2.log: fflush2$(EXEEXT)
-	@p='fflush2$(EXEEXT)'; \
-	b='fflush2'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-fortranlib_test_1_8.log: fortranlib_test_1_8$(EXEEXT)
-	@p='fortranlib_test_1_8$(EXEEXT)'; \
-	b='fortranlib_test_1_8'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-fortranlib_test_F03.log: fortranlib_test_F03$(EXEEXT)
-	@p='fortranlib_test_F03$(EXEEXT)'; \
-	b='fortranlib_test_F03'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool clean-local \
-	clean-noinstLTLIBRARIES clean-noinstPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-local distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic \
-	maintainer-clean-local
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
-	clean-local clean-noinstLTLIBRARIES clean-noinstPROGRAMS \
-	cscopelist-am ctags ctags-am distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-local \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic \
-	maintainer-clean-local mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5-Fortran test/Makefile(.in)
-#
-# Autoconf cannot figure out dependencies between modules; disable parallel make
-.NOTPARALLEL:
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Fortran module files can have different extensions and different names
-# (e.g., different capitalizations) on different platforms.  Write rules
-# for them explicitly rather than trying to teach automake about them.
-# They should be installed as headers and removed during clean.
-maintainer-clean-local: clean-local
-distclean-local: clean-local
-clean-local:
-	@if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
-	  $(RM) *.$(F9XMODEXT) tf_gen.F90;                                         \
-	fi
-
-# H5_test_buildiface.F90 generates all the test APIs that have a KIND type associated
-# with them.
-
-tf_gen.F90: H5_test_buildiface$(EXEEXT)
-	$(RUNSERIAL) ./H5_test_buildiface$(EXEEXT)
-
-# fflush2 depends on files created by fflush1
-fflush2.chkexe_: fflush1.chkexe_
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/fortran/test/tH5P_F03.F90 b/fortran/test/tH5P_F03.F90
index ec9fef2..8982fc2 100644
--- a/fortran/test/tH5P_F03.F90
+++ b/fortran/test/tH5P_F03.F90
@@ -221,6 +221,9 @@ SUBROUTINE test_create(total_error)
   CALL h5dopen_f(file, "dset9", dset9, error)
   CALL check("h5dopen_f", error, total_error)
 
+  CALL H5Pclose_f(dcpl, error)
+  CALL check("H5Pclose_f", error, total_error)
+
   CALL H5Dget_create_plist_f(dset9, dcpl, error)
   CALL check("H5Dget_create_plist_f", error, total_error)
 
diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in
deleted file mode 100644
index 8f4b815..0000000
--- a/fortran/testpar/Makefile.in
+++ /dev/null
@@ -1,1349 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Fortran Parallel Library Test Makefile(.in)
-#
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver
-
-# Some Fortran compilers can't build shared libraries, so sometimes we
-# want to build a shared C library and a static Fortran library.  If so,
-# pass the -static flag to the library linker.
-# (Actually, we historically have bad luck combining shared libraries with
-# parallel code.  But you're welcome to try...)
-@FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static
-check_PROGRAMS = $(am__EXEEXT_1)
-TESTS =
-subdir = fortran/testpar
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__EXEEXT_1 = parallel_test$(EXEEXT)
-am_parallel_test_OBJECTS = ptest.$(OBJEXT) hyper.$(OBJEXT) \
-	mdset.$(OBJEXT)
-parallel_test_OBJECTS = $(am_parallel_test_OBJECTS)
-parallel_test_LDADD = $(LDADD)
-parallel_test_DEPENDENCIES = $(LIBH5FTEST) $(LIBH5TEST) $(LIBH5F) \
-	$(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-FCCOMPILE = $(FC) $(AM_FCFLAGS) $(FCFLAGS)
-LTFCCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(FC) $(AM_FCFLAGS) $(FCFLAGS)
-AM_V_FC = $(am__v_FC_@AM_V@)
-am__v_FC_ = $(am__v_FC_@AM_DEFAULT_V@)
-am__v_FC_0 = @echo "  FC      " $@;
-am__v_FC_1 = 
-FCLD = $(FC)
-FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_FCLD = $(am__v_FCLD_@AM_V@)
-am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@)
-am__v_FCLD_0 = @echo "  FCLD    " $@;
-am__v_FCLD_1 = 
-SOURCES = $(parallel_test_SOURCES)
-DIST_SOURCES = $(parallel_test_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-
-# Include files
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ -I$(top_srcdir)/fortran/src \
-	-I$(top_srcdir)/fortran/test \
-	$(F9XMODFLAG)$(top_builddir)/fortran/src \
-	$(F9XMODFLAG)$(top_builddir)/fortran/test
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1)
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 parf[12].h5
-
-# These are our main targets
-TEST_PROG_PARA = parallel_test
-
-# Test source files
-parallel_test_SOURCES = ptest.f90 hyper.f90 mdset.f90
-
-# The tests depend on several libraries.
-LDADD = $(LIBH5FTEST) $(LIBH5TEST) $(LIBH5F) $(LIBHDF5)
-
-# Mark this directory as part of the Fortran API
-FORTRAN_API = yes
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign fortran/testpar/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign fortran/testpar/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-parallel_test$(EXEEXT): $(parallel_test_OBJECTS) $(parallel_test_DEPENDENCIES) $(EXTRA_parallel_test_DEPENDENCIES) 
-	@rm -f parallel_test$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(parallel_test_OBJECTS) $(parallel_test_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-.f90.obj:
-	$(AM_V_FC)$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) `$(CYGPATH_W) '$<'`
-
-.f90.lo:
-	$(AM_V_FC)$(LTFCCOMPILE) -c -o $@ $(FCFLAGS_f90) $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/Makefile.in b/hl/Makefile.in
deleted file mode 100644
index b2309d8..0000000
--- a/hl/Makefile.in
+++ /dev/null
@@ -1,1395 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# 
-# This makefile mostly just reinvokes make in the various subdirectories
-# but does so in the correct order.  You can alternatively invoke make from
-# each subdirectory manually.
-#
-# HDF5 High-Level Makefile(.in)
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver COPYING
-TESTS =
-subdir = hl
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	check recheck distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
-@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
-@BUILD_HDF5_HL_CONDITIONAL_TRUE@SUBDIRS = src test tools $(CXX_DIR) $(FORTRAN_DIR)
-DIST_SUBDIRS = src test tools c++ fortran examples
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
-all-am: Makefile all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) check-am install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
-	check check-TESTS check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installcheck-local installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Install examples
-install-examples uninstall-examples:
-	for d in examples $(HDF5_INTERFACES); do               \
-	    (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;           \
-	done
-
-installcheck-local:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-# Clean examples when check-clean is invoked
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS) examples; do                                   \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-build-check-clean:
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/c++/Makefile.in b/hl/c++/Makefile.in
deleted file mode 100644
index 82177b4..0000000
--- a/hl/c++/Makefile.in
+++ /dev/null
@@ -1,1385 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# High-Level API C++ Makefile(.in)
-# 
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver COPYING
-TESTS =
-subdir = hl/c++
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	check recheck distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-SUBDIRS = src test
-DIST_SUBDIRS = src test examples
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/c++/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/c++/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
-all-am: Makefile all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) check-am install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
-	check check-TESTS check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installcheck-local installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Install examples
-install-examples uninstall-examples:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-installcheck-local:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-# Clean examples when check-clean is invoked
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS) examples; do                                   \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/c++/examples/Makefile.in b/hl/c++/examples/Makefile.in
deleted file mode 100644
index 00c53d8..0000000
--- a/hl/c++/examples/Makefile.in
+++ /dev/null
@@ -1,1303 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Examples Makefile(.in)
-#
-
-# We can't tell automake about example programs, because they need to be
-# built using h5cc (or h5fc, etc.) instead of the standard compilers.
-# This creates some extra work for us.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/examples.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/run-hlc++-ex.sh.in $(top_srcdir)/bin/test-driver
-TESTS =
-subdir = hl/c++/examples
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = run-hlc++-ex.sh
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
-
-# These are the programs that 'make all' or 'make prog' will build and
-# which 'make check' will run.  List them in the order they should be run.
-EXAMPLE_PROG = ptExampleFL
-TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
-
-# These are the example files to be installed
-INSTALL_FILES = ptExampleFL.cpp
-INSTALL_SCRIPT_FILES = run-hlc++-ex.sh
-
-# Tell conclude.am that these are C++ tests.
-CXX_API = yes
-
-# Where to install examples
-# Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c++
-EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl
-
-# Assume that all tests in this directory are examples, and tell
-# conclude.am when to build them.
-EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# We need to tell automake what to clean
-MOSTLYCLEANFILES = *.raw *.meta *.o
-CLEANFILES = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/c++/examples/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/c++/examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-run-hlc++-ex.sh: $(top_builddir)/config.status $(srcdir)/run-hlc++-ex.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am all-local check check-TESTS check-am clean \
-	clean-generic clean-libtool cscopelist-am ctags-am distclean \
-	distclean-generic distclean-libtool distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-data-local install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installcheck-local installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags-am uninstall uninstall-am \
-	uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# How to build programs using h5c++
-$(EXTRA_PROG): $(H5CPP)
-	$(H5CPP) $(H5CCFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/$@.cpp
-
-# List dependencies for each program.  Normally, automake would take
-# care of this for us, but if we tell automake about the programs it
-# will try to build them with the normal C++ compiler, not h5c++.  This is
-# an inelegant way of solving the problem, unfortunately.
-ptExampleFL: ptExampleFL.cpp
-
-# How to create EXAMPLEDIR if it doesn't already exist
-$(EXAMPLEDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-$(EXAMPLETOPDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-
-# Install and uninstall rules.  We install the source files, not the
-# example programs themselves.
-install-data-local:
-	@$(MAKE) $(AM_MAKEFLAGS) install-examples
-uninstall-local:
-	@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
-
-install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) 
-	@for f in X $(INSTALL_FILES); do                                     \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);    \
-            chmod a-x $(EXAMPLEDIR)/$$f;                                     \
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_SCRIPT_FILES); do                                   \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-            chmod a-x $(EXAMPLETOPDIR)/$$f;\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_SCRIPT_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-	  fi;                                                                \
-	done
-
-uninstall-examples:
-	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then             \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES);                \
-	fi
-	@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then           \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES);              \
-	fi
-	@if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES);       \
-	fi
-	@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES);       \
-	fi
-
-installcheck-local:
-	@if test "$(STATIC_SHARED)" = "static, shared"; then               \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	  $(MAKE) $(AM_MAKEFLAGS) clean;                                   \
-	  H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check;                      \
-	elif test "$(STATIC_SHARED)" = "shared"; then                     \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	else                                                              \
-	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	fi 
-	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
-	    echo "============================";                                         \
-	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
-	    echo "============================";                                         \
-	    (cd $(EXAMPLEDIR);                                                           \
-	     /bin/sh ./$(TEST_EXAMPLES_SCRIPT);)                                                   \
-	fi
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in
deleted file mode 100644
index 84694ac..0000000
--- a/hl/c++/src/Makefile.in
+++ /dev/null
@@ -1,1431 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5-C++ Makefile(.in)
-#
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/lt_vers.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(include_HEADERS) \
-	$(top_srcdir)/bin/test-driver
-TESTS =
-subdir = hl/c++/src
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libhdf5_hl_cpp_la_DEPENDENCIES = $(LIBH5_HL) $(LIBH5CPP)
-am_libhdf5_hl_cpp_la_OBJECTS = H5PacketTable.lo
-libhdf5_hl_cpp_la_OBJECTS = $(am_libhdf5_hl_cpp_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-libhdf5_hl_cpp_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CXXLD) \
-	$(AM_CXXFLAGS) $(CXXFLAGS) $(libhdf5_hl_cpp_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CXXFLAGS) $(CXXFLAGS)
-AM_V_CXX = $(am__v_CXX_@AM_V@)
-am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
-am__v_CXX_0 = @echo "  CXX     " $@;
-am__v_CXX_1 = 
-CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
-	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
-am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
-am__v_CXXLD_0 = @echo "  CXXLD   " $@;
-am__v_CXXLD_1 = 
-SOURCES = $(libhdf5_hl_cpp_la_SOURCES)
-DIST_SOURCES = $(libhdf5_hl_cpp_la_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-HEADERS = $(include_HEADERS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src directory
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/hl/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# Add libtool shared library version numbers to the HDF5 library
-# See libtool versioning documentation online.
-# After making changes, run bin/reconfigure to update other configure related
-# files like Makefile.in.
-LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 221
-LT_VERS_AGE = 0
-
-# This is our main target
-lib_LTLIBRARIES = libhdf5_hl_cpp.la
-
-# Add libtool numbers to the HDF5 HL C++ library (from config/lt_vers.am)
-libhdf5_hl_cpp_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVISION):$(LT_VERS_AGE) $(AM_LDFLAGS)
-
-# Source files for the library
-# At the moment, only the H5PT Packet Table has a C++ API.
-libhdf5_hl_cpp_la_SOURCES = H5PacketTable.cpp
-
-# HDF5 HL C++ library depends on HDF5 Library.
-libhdf5_hl_cpp_la_LIBADD = $(LIBH5_HL) $(LIBH5CPP)
-
-# Public headers
-include_HEADERS = H5PacketTable.h
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/c++/src/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/c++/src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-	}
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	test -z "$$locs" || { \
-	  echo rm -f $${locs}; \
-	  rm -f $${locs}; \
-	}
-
-libhdf5_hl_cpp.la: $(libhdf5_hl_cpp_la_OBJECTS) $(libhdf5_hl_cpp_la_DEPENDENCIES) $(EXTRA_libhdf5_hl_cpp_la_DEPENDENCIES) 
-	$(AM_V_CXXLD)$(libhdf5_hl_cpp_la_LINK) -rpath $(libdir) $(libhdf5_hl_cpp_la_OBJECTS) $(libhdf5_hl_cpp_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PacketTable.Plo@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.cpp.lo:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-includeHEADERS: $(include_HEADERS)
-	@$(NORMAL_INSTALL)
-	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
-	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
-	done
-
-uninstall-includeHEADERS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(HEADERS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-includeHEADERS
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-generic clean-libLTLIBRARIES \
-	clean-libtool cscopelist-am ctags ctags-am distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-includeHEADERS install-info \
-	install-info-am install-libLTLIBRARIES install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
-	uninstall-includeHEADERS uninstall-libLTLIBRARIES
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in
deleted file mode 100644
index 1fab9a5..0000000
--- a/hl/c++/test/Makefile.in
+++ /dev/null
@@ -1,1359 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5-C++ Makefile(.in)
-#
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
-check_PROGRAMS = $(am__EXEEXT_1)
-TESTS = $(am__EXEEXT_1)
-subdir = hl/c++/test
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__EXEEXT_1 = ptableTest$(EXEEXT)
-am_ptableTest_OBJECTS = ptableTest.$(OBJEXT)
-ptableTest_OBJECTS = $(am_ptableTest_OBJECTS)
-ptableTest_LDADD = $(LDADD)
-ptableTest_DEPENDENCIES = $(LIBH5CPP_HL) $(LIBH5_HL) $(LIBH5CPP) \
-	$(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CXXFLAGS) $(CXXFLAGS)
-AM_V_CXX = $(am__v_CXX_@AM_V@)
-am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
-am__v_CXX_0 = @echo "  CXX     " $@;
-am__v_CXX_1 = 
-CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
-	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
-am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
-am__v_CXXLD_0 = @echo "  CXXLD   " $@;
-am__v_CXXLD_1 = 
-SOURCES = $(ptableTest_SOURCES)
-DIST_SOURCES = $(ptableTest_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include directories
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/c++/src -I$(top_srcdir)/hl/src \
-	-I$(top_srcdir)/hl/c++/src -I$(top_srcdir)/test \
-	-I$(top_builddir)/hl/test -I$(top_srcdir)/hl/test
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# These are our main targets.  They should be listed in the order to be
-# executed, generally most specific tests to least specific tests.
-TEST_PROG = ptableTest
-
-# The tests depend on the hdf5, hdf5 C++, and hdf5_hl libraries
-LDADD = $(LIBH5CPP_HL) $(LIBH5_HL) $(LIBH5CPP) $(LIBHDF5)
-ptableTest_SOURCES = ptableTest.cpp
-
-# Tell conclude.am that these are C++ tests.
-CXX_API = yes
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/c++/test/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/c++/test/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-ptableTest$(EXEEXT): $(ptableTest_OBJECTS) $(ptableTest_DEPENDENCIES) $(EXTRA_ptableTest_DEPENDENCIES) 
-	@rm -f ptableTest$(EXEEXT)
-	$(AM_V_CXXLD)$(CXXLINK) $(ptableTest_OBJECTS) $(ptableTest_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ptableTest.Po@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.cpp.lo:
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-ptableTest.log: ptableTest$(EXEEXT)
-	@p='ptableTest$(EXEEXT)'; \
-	b='ptableTest'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/examples/Makefile.in b/hl/examples/Makefile.in
deleted file mode 100644
index b9ede6f..0000000
--- a/hl/examples/Makefile.in
+++ /dev/null
@@ -1,1342 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Examples Makefile(.in)
-#
-
-# We can't tell automake about example programs, because they need to be
-# built using h5cc (or h5fc, etc.) instead of the standard compilers.
-# This creates some extra work for us.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/examples.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/run-hlc-ex.sh.in $(top_srcdir)/bin/test-driver
-TESTS =
-subdir = hl/examples
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = run-hlc-ex.sh
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
-@BUILD_PARALLEL_CONDITIONAL_TRUE@EXAMPLE_PROG_PARA = 
-
-# Example directory
-# Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c
-EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl
-INSTALL_SCRIPT_FILES = run-hlc-ex.sh
-INSTALL_TOP_SCRIPT_FILES = run-hl-ex.sh
-
-# Example programs.
-# Don't tell automake about them, because if it knew they were programs,
-# it would try to compile them instead of using the h5cc script.
-# Use the boilerplate in config/examples.am instead.
-EXAMPLE_PROG = ex_lite1 ex_lite2 ex_lite3 ptExampleFL \
-            ex_image1 ex_image2 \
-            ex_table_01 ex_table_02 ex_table_03 ex_table_04 \
-            ex_table_05 ex_table_06 ex_table_07 ex_table_08 \
-            ex_table_09 ex_table_10 ex_table_11 ex_table_12 \
-            ex_ds1
-
-TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
-
-# Install files
-# List all file that should be installed in examples directory
-INSTALL_FILES = ex_lite1.c ex_lite2.c ex_lite3.c ptExampleFL.c \
-                ex_image1.c ex_image2.c \
-                ex_table_01.c ex_table_02.c ex_table_03.c ex_table_04.c      \
-                ex_table_05.c ex_table_06.c ex_table_07.c ex_table_08.c      \
-                ex_table_09.c ex_table_10.c ex_table_11.c ex_table_12.c      \
-                ex_ds1.c image24pixel.txt image8.txt pal_rgb.h
-
-@BUILD_SHARED_SZIP_CONDITIONAL_TRUE@LD_LIBRARY_PATH = $(LL_PATH)
-
-# Assume that all tests in this directory are examples, and tell
-# conclude.am when to build them.
-EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# We need to tell automake what to clean
-MOSTLYCLEANFILES = *.raw *.meta *.o
-CLEANFILES = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/examples/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-run-hlc-ex.sh: $(top_builddir)/config.status $(srcdir)/run-hlc-ex.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am all-local check check-TESTS check-am clean \
-	clean-generic clean-libtool cscopelist-am ctags-am distclean \
-	distclean-generic distclean-libtool distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-data-local install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installcheck-local installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags-am uninstall uninstall-am \
-	uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Additional dependencies for each program are listed below.
-@BUILD_PARALLEL_CONDITIONAL_TRUE@$(EXTRA_PROG): $(H5CC_PP)
-@BUILD_PARALLEL_CONDITIONAL_TRUE@	$(H5CC_PP) $(H5CCFLAGS) $(CFLAGS) -o $@ $(srcdir)/$@.c;
-@BUILD_PARALLEL_CONDITIONAL_FALSE@$(EXTRA_PROG): $(H5CC)
-@BUILD_PARALLEL_CONDITIONAL_FALSE@	$(H5CC) $(H5CCFLAGS) $(CFLAGS) -o $@ $(srcdir)/$@.c;
-
-# ex_lite2 uses a file created by ex_lite1
-ex_lite2.chkexe_: ex_lite1.chkexe_
-
-# List dependencies for each program.  Normally, automake would take
-# care of this for us, but if we tell automake about the programs it
-# will try to build them with the normal C compiler, not h5cc.  This is
-# an inelegant way of solving the problem.
-# All programs share the same build rule and a dependency on the main hdf5
-# library above.
-ex_lite1: $(srcdir)/ex_lite1.c
-ex_lite2: $(srcdir)/ex_lite2.c
-ex_lite3: $(srcdir)/ex_lite3.c
-ptExampleFL: $(srcdir)/ptExampleFL.c
-ex_image1: $(srcdir)/ex_image1.c
-ex_image2: $(srcdir)/ex_image2.c
-ex_table01: $(srcdir)/ex_table01.c
-ex_table02: $(srcdir)/ex_table02.c
-ex_table03: $(srcdir)/ex_table03.c
-ex_table04: $(srcdir)/ex_table04.c
-ex_table05: $(srcdir)/ex_table05.c
-ex_table06: $(srcdir)/ex_table06.c
-ex_table07: $(srcdir)/ex_table07.c
-ex_table08: $(srcdir)/ex_table08.c
-ex_table09: $(srcdir)/ex_table09.c
-ex_table10: $(srcdir)/ex_table10.c
-ex_table11: $(srcdir)/ex_table11.c
-ex_table12: $(srcdir)/ex_table12.c
-
-# How to create EXAMPLEDIR if it doesn't already exist
-$(EXAMPLEDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-$(EXAMPLETOPDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-
-# Install and uninstall rules.  We install the source files, not the
-# example programs themselves.
-install-data-local:
-	@$(MAKE) $(AM_MAKEFLAGS) install-examples
-uninstall-local:
-	@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
-
-install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) 
-	@for f in X $(INSTALL_FILES); do                                     \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);    \
-            chmod a-x $(EXAMPLEDIR)/$$f;                                     \
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_SCRIPT_FILES); do                                   \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-            chmod a-x $(EXAMPLETOPDIR)/$$f;\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_SCRIPT_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-	  fi;                                                                \
-	done
-
-uninstall-examples:
-	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then             \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES);                \
-	fi
-	@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then           \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES);              \
-	fi
-	@if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES);       \
-	fi
-	@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES);       \
-	fi
-
-installcheck-local:
-	@if test "$(STATIC_SHARED)" = "static, shared"; then               \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	  $(MAKE) $(AM_MAKEFLAGS) clean;                                   \
-	  H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check;                      \
-	elif test "$(STATIC_SHARED)" = "shared"; then                     \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	else                                                              \
-	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	fi 
-	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
-	    echo "============================";                                         \
-	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
-	    echo "============================";                                         \
-	    (cd $(EXAMPLEDIR);                                                           \
-	     /bin/sh ./$(TEST_EXAMPLES_SCRIPT);)                                                   \
-	fi
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
deleted file mode 100644
index 304a3b6..0000000
--- a/hl/fortran/Makefile.in
+++ /dev/null
@@ -1,1389 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# 
-# This makefile mostly just reinvokes make in the various subdirectories
-# but does so in the correct order.  You can alternatively invoke make from
-# each subdirectory manually.
-#
-# HDF5 High-Level Makefile(.in)
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver COPYING
-TESTS =
-subdir = hl/fortran
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	check recheck distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-SUBDIRS = src test
-DIST_SUBDIRS = src test examples
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/fortran/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
-all-am: Makefile all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) check-am install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
-	check check-TESTS check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installcheck-local installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Install examples
-install-examples uninstall-examples:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-installcheck-local:
-	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
-
-# Clean examples when check-clean is invoked
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS) examples; do                                   \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/fortran/examples/Makefile.in b/hl/fortran/examples/Makefile.in
deleted file mode 100644
index 21ff588..0000000
--- a/hl/fortran/examples/Makefile.in
+++ /dev/null
@@ -1,1326 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5-Fortran Examples Makefile(.in)
-#
-
-# We can't tell automake about example programs, because they need to be
-# built using h5cc (or h5fc, etc.) instead of the standard compilers.
-# This creates some extra work for us.
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/examples.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/run-hlfortran-ex.sh.in $(top_srcdir)/bin/test-driver
-TESTS =
-subdir = hl/fortran/examples
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = run-hlfortran-ex.sh
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
-
-# Compile parallel fortran examples only if parallel is enabled
-@BUILD_PARALLEL_CONDITIONAL_TRUE@EXAMPLE_PROG_PARA = 
-
-# These are the programs that 'make all' or 'make tests' will build and
-# that 'make check' will run.  List them in the order in which they should
-# be run.
-# We don't tell automake about these programs so that it doesn't try to
-# compile them with the regular fortran compiler.
-EXAMPLE_PROG = exlite ex_ds1
-TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
-
-# List files to be installed here
-INSTALL_FILES = exlite.f90 ex_ds1.f90
-INSTALL_SCRIPT_FILES = run-hlfortran-ex.sh
-
-# Mark this directory as part of the Fortran API (this affects output
-# from tests in conclude.am)
-FORTRAN_API = yes
-
-# Tell automake how to install examples
-# Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/fortran
-EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl
-
-# Assume that all tests in this directory are examples, and tell
-# conclude.am when to build them.
-EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-
-# We need to tell automake what to clean
-MOSTLYCLEANFILES = *.raw *.meta *.o
-CLEANFILES = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .f90 .log .o .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/examples/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/fortran/examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-run-hlfortran-ex.sh: $(top_builddir)/config.status $(srcdir)/run-hlfortran-ex.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am all-local check check-TESTS check-am clean \
-	clean-generic clean-libtool cscopelist-am ctags-am distclean \
-	distclean-generic distclean-libtool distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-data-local install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installcheck-local installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags-am uninstall uninstall-am \
-	uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Tell automake how to build examples using h5fc
-@BUILD_PARALLEL_CONDITIONAL_TRUE@$(EXTRA_PROG): $(H5FC_PP)
-@BUILD_PARALLEL_CONDITIONAL_TRUE@	$(H5FC_PP) $(H5CCFLAGS) $(FCFLAGS) -o $@ $(srcdir)/$@.f90;
-@BUILD_PARALLEL_CONDITIONAL_FALSE@$(EXTRA_PROG): $(H5FC)
-@BUILD_PARALLEL_CONDITIONAL_FALSE@	$(H5FC) $(H5CCFLAGS) $(FCFLAGS) -o $@ $(srcdir)/$@.f90;
-
-# How to create EXAMPLEDIR if it doesn't already exist
-$(EXAMPLEDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-$(EXAMPLETOPDIR):
-	-$(top_srcdir)/bin/mkdirs $@
-
-# Install and uninstall rules.  We install the source files, not the
-# example programs themselves.
-install-data-local:
-	@$(MAKE) $(AM_MAKEFLAGS) install-examples
-uninstall-local:
-	@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
-
-install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) 
-	@for f in X $(INSTALL_FILES); do                                     \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);    \
-            chmod a-x $(EXAMPLEDIR)/$$f;                                     \
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_SCRIPT_FILES); do                                   \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-            chmod a-x $(EXAMPLETOPDIR)/$$f;\
-	  fi;                                                                \
-	done
-	@for f in X $(INSTALL_TOP_SCRIPT_FILES); do                       \
-	  if test $$f != X; then                                             \
-	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
-	  fi;                                                                \
-	done
-
-uninstall-examples:
-	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then             \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES);                \
-	fi
-	@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then           \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES);              \
-	fi
-	@if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES);       \
-	fi
-	@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then    \
-	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES);       \
-	fi
-
-installcheck-local:
-	@if test "$(STATIC_SHARED)" = "static, shared"; then               \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	  $(MAKE) $(AM_MAKEFLAGS) clean;                                   \
-	  H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check;                      \
-	elif test "$(STATIC_SHARED)" = "shared"; then                     \
-	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	else                                                              \
-	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	fi 
-	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
-	    echo "============================";                                         \
-	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
-	    echo "============================";                                         \
-	    (cd $(EXAMPLEDIR);                                                           \
-	     /bin/sh ./$(TEST_EXAMPLES_SCRIPT);)                                                   \
-	fi
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# List dependencies for each example.  Normally, automake would take
-# care of this for us, but if we tell automake about the programs it
-# will try to build them with the normal C compiler, not h5cc.  This is
-# an inelegant way of solving the problem.
-# All programs share the same build rule and a dependency on the main hdf5
-# and fortran libraries above.
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/fortran/src/H5LTfc.c b/hl/fortran/src/H5LTfc.c
index c955590..3a94664 100644
--- a/hl/fortran/src/H5LTfc.c
+++ b/hl/fortran/src/H5LTfc.c
@@ -298,7 +298,7 @@ h5ltset_attribute_c(hid_t_f *loc_id,
 		         void *buf, char *dtype, size_t_f *sizeof_val)
 {
     int     ret_value = -1;
-    herr_t  ret;
+    herr_t  ret = SUCCEED;
     hid_t   c_loc_id;
     char    *c_name = NULL;
     char    *c_attrname = NULL;
@@ -394,7 +394,7 @@ h5ltget_attribute_c(hid_t_f *loc_id,
 		         void *buf, char *dtype, size_t_f *sizeof_val)
 {
     int     ret_value = -1;
-    herr_t  ret;
+    herr_t  ret = SUCCEED;
     hid_t   c_loc_id;
     char    *c_name = NULL;
     char    *c_attrname = NULL;
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
deleted file mode 100644
index 85e5d42..0000000
--- a/hl/fortran/src/Makefile.in
+++ /dev/null
@@ -1,1522 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-#
-# HDF5 High-Level Fortran Makefile(.in)
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/lt_vers.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
-
-# Some Fortran compilers can't build shared libraries, so sometimes we
-# want to build a shared C library and a static Fortran library.  If so,
-# pass the -static flag to the library linker.
-@FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static
-noinst_PROGRAMS = H5HL_buildiface$(EXEEXT)
-TESTS =
-subdir = hl/fortran/src
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(libdir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libhdf5hl_fortran_la_DEPENDENCIES = $(LIBH5_HL) $(LIBH5F)
-am_libhdf5hl_fortran_la_OBJECTS = H5DSfc.lo H5LTfc.lo H5IMfc.lo \
-	H5IMcc.lo H5TBfc.lo H5DSff.lo H5LTff.lo H5TBff.lo H5IMff.lo \
-	H5LTff_gen.lo H5TBff_gen.lo
-libhdf5hl_fortran_la_OBJECTS = $(am_libhdf5hl_fortran_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-libhdf5hl_fortran_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=FC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(FCLD) \
-	$(AM_FCFLAGS) $(FCFLAGS) $(libhdf5hl_fortran_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
-PROGRAMS = $(noinst_PROGRAMS)
-am_H5HL_buildiface_OBJECTS = H5HL_buildiface.$(OBJEXT)
-H5HL_buildiface_OBJECTS = $(am_H5HL_buildiface_OBJECTS)
-H5HL_buildiface_LDADD = $(LDADD)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-AM_V_PPFC = $(am__v_PPFC_@AM_V@)
-am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@)
-am__v_PPFC_0 = @echo "  PPFC    " $@;
-am__v_PPFC_1 = 
-FCLD = $(FC)
-FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_FCLD = $(am__v_FCLD_@AM_V@)
-am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@)
-am__v_FCLD_0 = @echo "  FCLD    " $@;
-am__v_FCLD_1 = 
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = $(libhdf5hl_fortran_la_SOURCES) $(H5HL_buildiface_SOURCES)
-DIST_SOURCES = $(libhdf5hl_fortran_la_SOURCES) \
-	$(H5HL_buildiface_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/hl/src -I$(top_builddir)/hl/src \
-	-I$(top_srcdir)/fortran/src -I$(top_builddir)/fortran/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ -I$(top_builddir)/fortran/src \
-	$(F9XMODFLAG)$(top_builddir)/fortran/src
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1)
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# Add libtool shared library version numbers to the HDF5 library
-# See libtool versioning documentation online.
-# After making changes, run bin/reconfigure to update other configure related
-# files like Makefile.in.
-LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 221
-LT_VERS_AGE = 0
-
-# Our main target, the high-level fortran library
-lib_LTLIBRARIES = libhdf5hl_fortran.la
-
-# Add libtool numbers to the HDF5 HL Fortran library (from config/lt_vers.am)
-libhdf5hl_fortran_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVISION):$(LT_VERS_AGE) $(AM_LDFLAGS)
-
-# Source files for the library
-#if BUILD_PARALLEL_CONDITIONAL
-#    PARALLEL_COND_SRC=HDFDmpiof.c HDF5mpio.F90
-#endif
-
-# List sources to include in the HDF5 HL Fortran library.
-libhdf5hl_fortran_la_SOURCES = H5DSfc.c H5LTfc.c H5IMfc.c H5IMcc.c H5TBfc.c \
-	H5DSff.F90 H5LTff.F90 H5TBff.F90 H5IMff.F90 H5LTff_gen.F90 H5TBff_gen.F90
-
-
-# HDF5 HL Fortran library depends on HDF5 Library.
-libhdf5hl_fortran_la_LIBADD = $(LIBH5_HL) $(LIBH5F)
-
-#H5TBff_gen.F90: H5HL_buildiface$(EXEEXT)
-
-# H5HL_buildiface.F90 is included in the distribution, and Automake knows
-# how to compile a fortran program given its sources.
-H5HL_buildiface_SOURCES = H5HL_buildiface.F90
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/src/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/fortran/src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-	}
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	test -z "$$locs" || { \
-	  echo rm -f $${locs}; \
-	  rm -f $${locs}; \
-	}
-
-libhdf5hl_fortran.la: $(libhdf5hl_fortran_la_OBJECTS) $(libhdf5hl_fortran_la_DEPENDENCIES) $(EXTRA_libhdf5hl_fortran_la_DEPENDENCIES) 
-	$(AM_V_FCLD)$(libhdf5hl_fortran_la_LINK) -rpath $(libdir) $(libhdf5hl_fortran_la_OBJECTS) $(libhdf5hl_fortran_la_LIBADD) $(LIBS)
-
-clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-H5HL_buildiface$(EXEEXT): $(H5HL_buildiface_OBJECTS) $(H5HL_buildiface_DEPENDENCIES) $(EXTRA_H5HL_buildiface_DEPENDENCIES) 
-	@rm -f H5HL_buildiface$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(H5HL_buildiface_OBJECTS) $(H5HL_buildiface_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DSfc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IMcc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IMfc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5LTfc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5TBfc.Plo@am__quote@
-
-.F90.obj:
-	$(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.F90.lo:
-	$(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $<
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \
-	clean-noinstPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-local distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic \
-	maintainer-clean-local
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-libLTLIBRARIES uninstall-local
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-generic clean-libLTLIBRARIES \
-	clean-libtool clean-local clean-noinstPROGRAMS cscopelist-am \
-	ctags ctags-am distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-local distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-data-local install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am \
-	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic maintainer-clean-local mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
-	uninstall uninstall-am uninstall-libLTLIBRARIES \
-	uninstall-local
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-# Fortran module files can have different extensions and different names
-# (e.g., different capitalizations) on different platforms.  Write rules
-# for them explicitly rather than trying to teach automake about them.
-# They should be installed as headers and removed during clean.
-maintainer-clean-local: clean-local
-distclean-local: clean-local
-clean-local:
-	@if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
-	  $(RM) *.$(F9XMODEXT) H5LTff_gen.F90 H5TBff_gen.F90; \
-	fi
-
-install-data-local:
-	@if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \
-	  $(CP) $(top_builddir)/$(subdir)/*.$(F9XMODEXT) $(DESTDIR)$(includedir)/. ; \
-	fi
-
-uninstall-local:
-	@if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then      \
-	  if test -f "$(includedir)/hdf5.$(F9XMODEXT)" -o -f "$(DESTDIR)$(includedir)/HDF5.$(F9XMODEXT)"; then \
-	    set -x; $(RM) $(includedir)/*.$(F9XMODEXT);                 \
-	  fi;                                                           \
-	fi
-
-# H5HL_buildiface.F90 generates all the APIs that have a KIND type associated
-# with them.
-
-H5LTff_gen.F90: H5HL_buildiface$(EXEEXT)
-	$(RUNSERIAL) ./H5HL_buildiface$(EXEEXT)
-
-H5TBff_gen.F90: H5HL_buildiface$(EXEEXT)
-# Hardcode the dependencies of these files. There isn't a known way of
-# determining this automagically (like we do with the C files). So, when
-# doing a parallel make, some modules could be made way before the
-# modules they depend upon are actually made. *sigh*
-H5DSff.lo:          $(srcdir)/H5DSff.F90
-H5LTff.lo:          $(srcdir)/H5LTff.F90
-H5IMff.lo:          $(srcdir)/H5IMff.F90
-H5TBff.lo:          $(srcdir)/H5TBff.F90
-H5LTff_gen.lo:      H5LTff.lo H5LTff_gen.F90
-H5TBff_gen.lo:      H5TBff.lo H5LTff_gen.F90 H5TBff_gen.F90
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in
deleted file mode 100644
index 117faf2..0000000
--- a/hl/fortran/test/Makefile.in
+++ /dev/null
@@ -1,1401 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-#
-# HDF5 High-Level Fortran Makefile(.in)
-
-# Makefile.am include fragment with Fortran helper rules and macros.
-
-# AM_FCCPPFLAGS, FCCPPFLAGS are currently not used.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude_fc.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver
-
-# Some Fortran compilers can't build shared libraries, so sometimes we
-# need to make sure the Fortran programs link against the static version
-# of the HDF5 library.  We do this by passing the -static flag to the linker.
-@FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static
-check_PROGRAMS = $(am__EXEEXT_1)
-TESTS = $(am__EXEEXT_1)
-subdir = hl/fortran/test
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__EXEEXT_1 = tstds$(EXEEXT) tstlite$(EXEEXT) tstimage$(EXEEXT) \
-	tsttable$(EXEEXT)
-am_tstds_OBJECTS = tstds.$(OBJEXT)
-tstds_OBJECTS = $(am_tstds_OBJECTS)
-tstds_LDADD = $(LDADD)
-tstds_DEPENDENCIES = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-am_tstimage_OBJECTS = tstimage.$(OBJEXT)
-tstimage_OBJECTS = $(am_tstimage_OBJECTS)
-tstimage_LDADD = $(LDADD)
-tstimage_DEPENDENCIES = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5)
-am_tstlite_OBJECTS = tstlite.$(OBJEXT)
-tstlite_OBJECTS = $(am_tstlite_OBJECTS)
-tstlite_LDADD = $(LDADD)
-tstlite_DEPENDENCIES = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5)
-am_tsttable_OBJECTS = tsttable.$(OBJEXT)
-tsttable_OBJECTS = $(am_tsttable_OBJECTS)
-tsttable_LDADD = $(LDADD)
-tsttable_DEPENDENCIES = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-AM_V_PPFC = $(am__v_PPFC_@AM_V@)
-am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@)
-am__v_PPFC_0 = @echo "  PPFC    " $@;
-am__v_PPFC_1 = 
-FCLD = $(FC)
-FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_FCLD = $(am__v_FCLD_@AM_V@)
-am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@)
-am__v_FCLD_0 = @echo "  FCLD    " $@;
-am__v_FCLD_1 = 
-SOURCES = $(tstds_SOURCES) $(tstimage_SOURCES) $(tstlite_SOURCES) \
-	$(tsttable_SOURCES)
-DIST_SOURCES = $(tstds_SOURCES) $(tstimage_SOURCES) $(tstlite_SOURCES) \
-	$(tsttable_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_builddir)/src -I$(top_srcdir)/hl/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ -I$(top_builddir)/fortran/src \
-	-I$(top_builddir)/hl/fortran/src \
-	$(F9XMODFLAG)$(top_builddir)/fortran/src \
-	$(F9XMODFLAG)$(top_builddir)/hl/fortran/src
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1)
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 dsetf[1-5].h5 \
-	f1img.h5 f1tab.h5 tstds.h5
-
-# Our main target, the test programs
-TEST_PROG = tstds tstlite tstimage tsttable
-LDADD = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL)  $(LIBHDF5)
-
-# Source files for the programs
-tstds_SOURCES = tstds.F90
-tstlite_SOURCES = tstlite.F90
-tstimage_SOURCES = tstimage.F90
-tsttable_SOURCES = tsttable.F90
-
-# Mark this directory as part of the Fortran API (this affects output
-# from tests in conclude.am)
-FORTRAN_API = yes
-PPFCCOMPILE = $(FC) $(FCDEFS) $(DEFAULT_INCLUDES)  $(FCINCLUDES) $(AM_FCCPPFLAGS) $(FCCPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS)
-LTPPFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(PPFCCOMPILE)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .F90 .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/test/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/fortran/test/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude_fc.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-tstds$(EXEEXT): $(tstds_OBJECTS) $(tstds_DEPENDENCIES) $(EXTRA_tstds_DEPENDENCIES) 
-	@rm -f tstds$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(tstds_OBJECTS) $(tstds_LDADD) $(LIBS)
-
-tstimage$(EXEEXT): $(tstimage_OBJECTS) $(tstimage_DEPENDENCIES) $(EXTRA_tstimage_DEPENDENCIES) 
-	@rm -f tstimage$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(tstimage_OBJECTS) $(tstimage_LDADD) $(LIBS)
-
-tstlite$(EXEEXT): $(tstlite_OBJECTS) $(tstlite_DEPENDENCIES) $(EXTRA_tstlite_DEPENDENCIES) 
-	@rm -f tstlite$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(tstlite_OBJECTS) $(tstlite_LDADD) $(LIBS)
-
-tsttable$(EXEEXT): $(tsttable_OBJECTS) $(tsttable_DEPENDENCIES) $(EXTRA_tsttable_DEPENDENCIES) 
-	@rm -f tsttable$(EXEEXT)
-	$(AM_V_FCLD)$(FCLINK) $(tsttable_OBJECTS) $(tsttable_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-.F90.obj:
-	$(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.F90.lo:
-	$(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-tstds.log: tstds$(EXEEXT)
-	@p='tstds$(EXEEXT)'; \
-	b='tstds'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-tstlite.log: tstlite$(EXEEXT)
-	@p='tstlite$(EXEEXT)'; \
-	b='tstlite'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-tstimage.log: tstimage$(EXEEXT)
-	@p='tstimage$(EXEEXT)'; \
-	b='tstimage'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-tsttable.log: tsttable$(EXEEXT)
-	@p='tsttable$(EXEEXT)'; \
-	b='tsttable'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Treat all .f90 and .F90 files as preprocessed Fortran.
-.f90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-.F90.o:
-	$(PPFCCOMPILE) -c -o $@ $(FCFLAGS) $<
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/src/CMakeLists.txt b/hl/src/CMakeLists.txt
index 23943f9..8d1a37f 100644
--- a/hl/src/CMakeLists.txt
+++ b/hl/src/CMakeLists.txt
@@ -1,26 +1,71 @@
 cmake_minimum_required (VERSION 3.1.0)
 PROJECT (HDF5_HL_SRC)
 
+if (HDF5_GENERATE_HEADERS)
+  find_package (BISON)
+  if (BISON_FOUND)
+    find_package (FLEX)
+    if (FLEX_FOUND)
+      BISON_TARGET (H5LT_PARSER H5LTparse.y ${CMAKE_CURRENT_BINARY_DIR}/H5LTparse.c COMPILE_FLAGS "-d -pH5LTyy")
+      if (WIN32)
+        FLEX_TARGET (H5LT_SCANNER H5LTanalyze.l ${CMAKE_CURRENT_BINARY_DIR}/H5LTanalyze.c COMPILE_FLAGS "--wincompat --nounistd -PH5LTyy")
+      else (WIN32)
+        FLEX_TARGET (H5LT_SCANNER H5LTanalyze.l ${CMAKE_CURRENT_BINARY_DIR}/H5LTanalyze.c COMPILE_FLAGS "--nounistd -PH5LTyy")
+      endif (WIN32)
+      ADD_FLEX_BISON_DEPENDENCY(H5LT_SCANNER H5LT_PARSER)
+
+      if (BISON_H5LT_PARSER_DEFINED AND FLEX_H5LT_SCANNER_DEFINED)
+        include_directories(${CMAKE_CURRENT_BINARY_DIR})
+        set (HL_SRCS
+            ${CMAKE_CURRENT_BINARY_DIR}/H5LTanalyze.c
+            ${CMAKE_CURRENT_BINARY_DIR}/H5LTparse.c
+        )
+        set (HL_HEADERS
+            ${CMAKE_CURRENT_BINARY_DIR}/H5LTparse.h
+        )
+        set_source_files_properties (${CMAKE_CURRENT_BINARY_DIR}/H5LTanalyze.c GENERATED)
+        set_source_files_properties (${CMAKE_CURRENT_BINARY_DIR}/H5LTparse.c GENERATED)
+        set_source_files_properties (${CMAKE_CURRENT_BINARY_DIR}/H5LTparse.h GENERATED)
+      else (BISON_H5LT_PARSER_DEFINED AND FLEX_H5LT_SCANNER_DEFINED)
+        message (STATUS "Error during generate of files")
+      endif (BISON_H5LT_PARSER_DEFINED AND FLEX_H5LT_SCANNER_DEFINED)
+    else (FLEX_FOUND)
+      message (STATUS "Cannot generate files - flex not found")
+    endif (FLEX_FOUND)
+  else (BISON_FOUND)
+    message (STATUS "Cannot generate files - bison not found")
+  endif (BISON_FOUND)
+else (HDF5_GENERATE_HEADERS)
+  set (HL_SRCS
+      ${HDF5_HL_SRC_SOURCE_DIR}/H5LTanalyze.c
+      ${HDF5_HL_SRC_SOURCE_DIR}/H5LTparse.c
+  )
+  set (HL_HEADERS
+      ${HDF5_HL_SRC_SOURCE_DIR}/H5LTparse.h
+  )
+endif (HDF5_GENERATE_HEADERS)
 
 #-----------------------------------------------------------------------------
 # List Source files
 #-----------------------------------------------------------------------------
 set (HL_SRCS
+    ${HL_SRCS}
     ${HDF5_HL_SRC_SOURCE_DIR}/H5DO.c
     ${HDF5_HL_SRC_SOURCE_DIR}/H5DS.c
     ${HDF5_HL_SRC_SOURCE_DIR}/H5IM.c
     ${HDF5_HL_SRC_SOURCE_DIR}/H5LT.c
-    ${HDF5_HL_SRC_SOURCE_DIR}/H5LTanalyze.c
-    ${HDF5_HL_SRC_SOURCE_DIR}/H5LTparse.c
+    #${HDF5_HL_SRC_SOURCE_DIR}/H5LTanalyze.c
+    #${HDF5_HL_SRC_SOURCE_DIR}/H5LTparse.c
     ${HDF5_HL_SRC_SOURCE_DIR}/H5PT.c
     ${HDF5_HL_SRC_SOURCE_DIR}/H5TB.c
 )
 
 set (HL_HEADERS
+    ${HL_HEADERS}
     ${HDF5_HL_SRC_SOURCE_DIR}/H5DOpublic.h
     ${HDF5_HL_SRC_SOURCE_DIR}/H5DSpublic.h
     ${HDF5_HL_SRC_SOURCE_DIR}/H5IMpublic.h
-    ${HDF5_HL_SRC_SOURCE_DIR}/H5LTparse.h
+    #${HDF5_HL_SRC_SOURCE_DIR}/H5LTparse.h
     ${HDF5_HL_SRC_SOURCE_DIR}/H5LTpublic.h
     ${HDF5_HL_SRC_SOURCE_DIR}/H5PTpublic.h
     ${HDF5_HL_SRC_SOURCE_DIR}/H5TBpublic.h
@@ -54,7 +99,7 @@ if (BUILD_SHARED_LIBS)
 endif (BUILD_SHARED_LIBS)
 
 #-----------------------------------------------------------------------------
-# Add file(s) to CMake Install 
+# Add file(s) to CMake Install
 #-----------------------------------------------------------------------------
 install (
     FILES
@@ -72,7 +117,7 @@ if (HDF5_EXPORTED_TARGETS)
   if (BUILD_SHARED_LIBS)
     INSTALL_TARGET_PDB (${HDF5_HL_LIBSH_TARGET} ${HDF5_INSTALL_BIN_DIR} hllibraries)
   endif (BUILD_SHARED_LIBS)
-  
+
   install (
       TARGETS
           ${install_targets}
diff --git a/hl/src/H5IM.c b/hl/src/H5IM.c
index 6fa548d..6d08f02 100644
--- a/hl/src/H5IM.c
+++ b/hl/src/H5IM.c
@@ -255,12 +255,12 @@ herr_t H5IMget_image_info( hid_t loc_id,
                           char *interlace,
                           hssize_t *npals )
 {
-    hid_t       did;
-    hid_t       sid;
+    hid_t       did                     = -1;
+    hid_t       sid                     = -1;
     hsize_t     dims[IMAGE24_RANK];
-    hid_t       aid;
-    hid_t       asid;
-    hid_t       atid;
+    hid_t       aid                     = -1;
+    hid_t       asid                    = -1;
+    hid_t       atid                    = -1;
     H5T_class_t aclass;
     int         has_pal;
     int         has_attr;
@@ -396,10 +396,14 @@ herr_t H5IMget_image_info( hid_t loc_id,
     return 0;
 
 out:
-    H5Dclose( did );
-    H5Aclose( aid );
-    H5Sclose( asid );
-    H5Tclose( atid );
+    if(did > 0)
+        H5Dclose( did );
+    if(aid > 0)
+        H5Aclose( aid );
+    if(asid > 0)
+        H5Sclose( asid );
+    if(atid > 0)
+        H5Tclose( atid );
     return -1;
 
 }
diff --git a/hl/src/H5LT.c b/hl/src/H5LT.c
index 8444e27..107e238 100644
--- a/hl/src/H5LT.c
+++ b/hl/src/H5LT.c
@@ -866,13 +866,13 @@ out:
 */
 hid_t H5LTopen_file_image(void *buf_ptr, size_t buf_size, unsigned flags)
 {
-    hid_t		fapl, file_id;	/* HDF5 identifiers */
-    unsigned            file_open_flags;/* Flags for image open */
-    char                file_name[64];	/* Filename buffer */
-    size_t              alloc_incr;     /* Buffer allocation increment */
-    size_t              min_incr = 65536; /* Minimum buffer increment */
-    double              buf_prcnt = 0.1f;  /* Percentage of buffer size to set
-                                             as increment */
+    hid_t		        fapl=-1, file_id=-1;    /* HDF5 identifiers */
+    unsigned            file_open_flags;        /* Flags for image open */
+    char                file_name[64];	        /* Filename buffer */
+    size_t              alloc_incr;             /* Buffer allocation increment */
+    size_t              min_incr = 65536;       /* Minimum buffer increment */
+    double              buf_prcnt = 0.1f;       /* Percentage of buffer size to set
+                                                    as increment */
     static long         file_name_counter; 
     H5FD_file_image_callbacks_t callbacks = {&image_malloc, &image_memcpy, 
                                            &image_realloc, &image_free, 
diff --git a/hl/src/H5LTanalyze.c b/hl/src/H5LTanalyze.c
deleted file mode 100644
index 54e443d..0000000
--- a/hl/src/H5LTanalyze.c
+++ /dev/null
@@ -1,2554 +0,0 @@
-#if __GNUC__ >= 4 && __GNUC_MINOR__ >=2                           
-#pragma GCC diagnostic ignored "-Wconversion"                     
-#pragma GCC diagnostic ignored "-Wimplicit-function-declaration"  
-#pragma GCC diagnostic ignored "-Wlarger-than="                   
-#pragma GCC diagnostic ignored "-Wmissing-prototypes"             
-#pragma GCC diagnostic ignored "-Wnested-externs"                 
-#pragma GCC diagnostic ignored "-Wold-style-definition"           
-#pragma GCC diagnostic ignored "-Wsign-compare"                   
-#pragma GCC diagnostic ignored "-Wsign-conversion"                
-#pragma GCC diagnostic ignored "-Wstrict-prototypes"              
-#pragma GCC diagnostic ignored "-Wswitch-default"                 
-#pragma GCC diagnostic ignored "-Wunused-function"                
-#pragma GCC diagnostic ignored "-Wunused-macros"                  
-#pragma GCC diagnostic ignored "-Wunused-parameter"               
-#elif defined __SUNPRO_CC                                         
-#pragma disable_warn                                              
-#elif defined _MSC_VER                                            
-#pragma warning(push, 1)                                          
-#endif                                                            
-#line 2 "H5LTanalyze.c"
-
-#line 4 "H5LTanalyze.c"
-
-#define  YY_INT_ALIGNED short int
-
-/* A lexical scanner generated by flex */
-
-#define yy_create_buffer H5LTyy_create_buffer
-#define yy_delete_buffer H5LTyy_delete_buffer
-#define yy_flex_debug H5LTyy_flex_debug
-#define yy_init_buffer H5LTyy_init_buffer
-#define yy_flush_buffer H5LTyy_flush_buffer
-#define yy_load_buffer_state H5LTyy_load_buffer_state
-#define yy_switch_to_buffer H5LTyy_switch_to_buffer
-#define yyin H5LTyyin
-#define yyleng H5LTyyleng
-#define yylex H5LTyylex
-#define yylineno H5LTyylineno
-#define yyout H5LTyyout
-#define yyrestart H5LTyyrestart
-#define yytext H5LTyytext
-#define yywrap H5LTyywrap
-#define yyalloc H5LTyyalloc
-#define yyrealloc H5LTyyrealloc
-#define yyfree H5LTyyfree
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 37
-#if YY_FLEX_SUBMINOR_VERSION > 0
-#define FLEX_BETA
-#endif
-
-/* First, we deal with  platform-specific or compiler-specific issues. */
-
-/* begin standard C headers. */
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-/* end standard C headers. */
-
-/* flex integer type definitions */
-
-#ifndef FLEXINT_H
-#define FLEXINT_H
-
-/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-
-/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types. 
- */
-#ifndef __STDC_LIMIT_MACROS
-#define __STDC_LIMIT_MACROS 1
-#endif
-
-#include <inttypes.h>
-typedef int8_t flex_int8_t;
-typedef uint8_t flex_uint8_t;
-typedef int16_t flex_int16_t;
-typedef uint16_t flex_uint16_t;
-typedef int32_t flex_int32_t;
-typedef uint32_t flex_uint32_t;
-#else
-typedef signed char flex_int8_t;
-typedef short int flex_int16_t;
-typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t; 
-typedef unsigned short int flex_uint16_t;
-typedef unsigned int flex_uint32_t;
-
-/* Limits of integral types. */
-#ifndef INT8_MIN
-#define INT8_MIN               (-128)
-#endif
-#ifndef INT16_MIN
-#define INT16_MIN              (-32767-1)
-#endif
-#ifndef INT32_MIN
-#define INT32_MIN              (-2147483647-1)
-#endif
-#ifndef INT8_MAX
-#define INT8_MAX               (127)
-#endif
-#ifndef INT16_MAX
-#define INT16_MAX              (32767)
-#endif
-#ifndef INT32_MAX
-#define INT32_MAX              (2147483647)
-#endif
-#ifndef UINT8_MAX
-#define UINT8_MAX              (255U)
-#endif
-#ifndef UINT16_MAX
-#define UINT16_MAX             (65535U)
-#endif
-#ifndef UINT32_MAX
-#define UINT32_MAX             (4294967295U)
-#endif
-
-#endif /* ! C99 */
-
-#endif /* ! FLEXINT_H */
-
-#ifdef __cplusplus
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else	/* ! __cplusplus */
-
-/* C99 requires __STDC__ to be defined as 1. */
-#if defined (__STDC__)
-
-#define YY_USE_CONST
-
-#endif	/* defined (__STDC__) */
-#endif	/* ! __cplusplus */
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index.  If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition.  This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN (yy_start) = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state.  The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START (((yy_start) - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE H5LTyyrestart(H5LTyyin  )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#ifndef YY_BUF_SIZE
-#define YY_BUF_SIZE 16384
-#endif
-
-/* The state buf must be large enough to hold one state per character in the main buffer.
- */
-#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
-
-#ifndef YY_TYPEDEF_YY_BUFFER_STATE
-#define YY_TYPEDEF_YY_BUFFER_STATE
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-#endif
-
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
-extern yy_size_t H5LTyyleng;
-
-extern FILE *H5LTyyin, *H5LTyyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
-    #define YY_LESS_LINENO(n)
-    
-/* Return all but the first "n" matched characters back to the input stream. */
-#define yyless(n) \
-	do \
-		{ \
-		/* Undo effects of setting up H5LTyytext. */ \
-        int yyless_macro_arg = (n); \
-        YY_LESS_LINENO(yyless_macro_arg);\
-		*yy_cp = (yy_hold_char); \
-		YY_RESTORE_YY_MORE_OFFSET \
-		(yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
-		YY_DO_BEFORE_ACTION; /* set up H5LTyytext again */ \
-		} \
-	while ( 0 )
-
-#define unput(c) yyunput( c, (yytext_ptr)  )
-
-#ifndef YY_STRUCT_YY_BUFFER_STATE
-#define YY_STRUCT_YY_BUFFER_STATE
-struct yy_buffer_state
-	{
-	FILE *yy_input_file;
-
-	char *yy_ch_buf;		/* input buffer */
-	char *yy_buf_pos;		/* current position in input buffer */
-
-	/* Size of input buffer in bytes, not including room for EOB
-	 * characters.
-	 */
-	yy_size_t yy_buf_size;
-
-	/* Number of characters read into yy_ch_buf, not including EOB
-	 * characters.
-	 */
-	yy_size_t yy_n_chars;
-
-	/* Whether we "own" the buffer - i.e., we know we created it,
-	 * and can realloc() it to grow it, and should free() it to
-	 * delete it.
-	 */
-	int yy_is_our_buffer;
-
-	/* Whether this is an "interactive" input source; if so, and
-	 * if we're using stdio for input, then we want to use getc()
-	 * instead of fread(), to make sure we stop fetching input after
-	 * each newline.
-	 */
-	int yy_is_interactive;
-
-	/* Whether we're considered to be at the beginning of a line.
-	 * If so, '^' rules will be active on the next match, otherwise
-	 * not.
-	 */
-	int yy_at_bol;
-
-    int yy_bs_lineno; /**< The line count. */
-    int yy_bs_column; /**< The column count. */
-    
-	/* Whether to try to fill the input buffer when we reach the
-	 * end of it.
-	 */
-	int yy_fill_buffer;
-
-	int yy_buffer_status;
-
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
-	/* When an EOF's been seen but there's still some text to process
-	 * then we mark the buffer as YY_EOF_PENDING, to indicate that we
-	 * shouldn't try reading from the input source any more.  We might
-	 * still have a bunch of tokens to match, though, because of
-	 * possible backing-up.
-	 *
-	 * When we actually see the EOF, we change the status to "new"
-	 * (via H5LTyyrestart()), so that the user can continue scanning by
-	 * just pointing H5LTyyin at a new input file.
-	 */
-#define YY_BUFFER_EOF_PENDING 2
-
-	};
-#endif /* !YY_STRUCT_YY_BUFFER_STATE */
-
-/* Stack of input buffers. */
-static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
-static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- *
- * Returns the top of the stack, or NULL.
- */
-#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
-                          ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
-                          : NULL)
-
-/* Same as previous macro, but useful when we know that the buffer stack is not
- * NULL or when we need an lvalue. For internal use only.
- */
-#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
-
-/* yy_hold_char holds the character lost when H5LTyytext is formed. */
-static char yy_hold_char;
-static yy_size_t yy_n_chars;		/* number of characters read into yy_ch_buf */
-yy_size_t H5LTyyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0;		/* whether we need to initialize */
-static int yy_start = 0;	/* start state number */
-
-/* Flag which is used to allow H5LTyywrap()'s to do buffer switches
- * instead of setting up a fresh H5LTyyin.  A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void H5LTyyrestart (FILE *input_file  );
-void H5LTyy_switch_to_buffer (YY_BUFFER_STATE new_buffer  );
-YY_BUFFER_STATE H5LTyy_create_buffer (FILE *file,int size  );
-void H5LTyy_delete_buffer (YY_BUFFER_STATE b  );
-void H5LTyy_flush_buffer (YY_BUFFER_STATE b  );
-void H5LTyypush_buffer_state (YY_BUFFER_STATE new_buffer  );
-void H5LTyypop_buffer_state (void );
-
-static void H5LTyyensure_buffer_stack (void );
-static void H5LTyy_load_buffer_state (void );
-static void H5LTyy_init_buffer (YY_BUFFER_STATE b,FILE *file  );
-
-#define YY_FLUSH_BUFFER H5LTyy_flush_buffer(YY_CURRENT_BUFFER )
-
-YY_BUFFER_STATE H5LTyy_scan_buffer (char *base,yy_size_t size  );
-YY_BUFFER_STATE H5LTyy_scan_string (yyconst char *yy_str  );
-YY_BUFFER_STATE H5LTyy_scan_bytes (yyconst char *bytes,yy_size_t len  );
-
-void *H5LTyyalloc (yy_size_t  );
-void *H5LTyyrealloc (void *,yy_size_t  );
-void H5LTyyfree (void *  );
-
-#define yy_new_buffer H5LTyy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
-	{ \
-	if ( ! YY_CURRENT_BUFFER ){ \
-        H5LTyyensure_buffer_stack (); \
-		YY_CURRENT_BUFFER_LVALUE =    \
-            H5LTyy_create_buffer(H5LTyyin,YY_BUF_SIZE ); \
-	} \
-	YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
-	}
-
-#define yy_set_bol(at_bol) \
-	{ \
-	if ( ! YY_CURRENT_BUFFER ){\
-        H5LTyyensure_buffer_stack (); \
-		YY_CURRENT_BUFFER_LVALUE =    \
-            H5LTyy_create_buffer(H5LTyyin,YY_BUF_SIZE ); \
-	} \
-	YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
-	}
-
-#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
-
-/* Begin user sect3 */
-
-typedef unsigned char YY_CHAR;
-
-FILE *H5LTyyin = (FILE *) 0, *H5LTyyout = (FILE *) 0;
-
-typedef int yy_state_type;
-
-extern int H5LTyylineno;
-
-int H5LTyylineno = 1;
-
-extern char *H5LTyytext;
-#define yytext_ptr H5LTyytext
-
-static yy_state_type yy_get_previous_state (void );
-static yy_state_type yy_try_NUL_trans (yy_state_type current_state  );
-static int yy_get_next_buffer (void );
-static void yy_fatal_error (yyconst char msg[]  );
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up H5LTyytext.
- */
-#define YY_DO_BEFORE_ACTION \
-	(yytext_ptr) = yy_bp; \
-	H5LTyyleng = (size_t) (yy_cp - yy_bp); \
-	(yy_hold_char) = *yy_cp; \
-	*yy_cp = '\0'; \
-	(yy_c_buf_p) = yy_cp;
-
-#define YY_NUM_RULES 66
-#define YY_END_OF_BUFFER 67
-/* This struct is not used in this scanner,
-   but its presence is necessary. */
-struct yy_trans_info
-	{
-	flex_int32_t yy_verify;
-	flex_int32_t yy_nxt;
-	};
-static yyconst flex_int16_t yy_acclist[437] =
-    {   0,
-       64,   64,   64,   64,   67,   66,   64,   66,   64,   65,
-       66,   56,   66,   55,   66,   62,   66,   63,   66,   66,
-       66,   66,   66,   60,   66,   61,   66,   58,   66,   59,
-       66,   57,   66,   57,   64,   66,   57,   64,   65,   66,
-       55,   57,   66,   57,   62,   66,   57,   63,   66,   57,
-       66,   57,   66,   57,   66,   57,   66,   57,   60,   66,
-       57,   61,   66,   57,   58,   66,   57,   59,   66,   64,
-       55,   57,   57,   64,   55,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,   57,   38,   38,   57,   57,
-       57,   57,   57,   57,   39,   39,   57,   57,   57,   57,
-
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   57,
-       37,   57,   57,   57,   57,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,   37,   57,   57,   54,   36,
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   54,   57,   36,   57,   45,   49,
-       51,   53,   57,   57,   57,   45,   57,   49,   57,   57,
-       57,   57,   57,   57,   57,   57,   57,   51,   57,   53,
-       57,   50,   50,   57,   57,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,   57,   52,   35,   57,   57,
-       57,   57,   57,   57,   52,   57,   57,   57,   57,   57,
-
-       57,   57,   57,   57,   35,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   48,
-        1,    2,    9,   10,   47,   48,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,    1,   57,    2,   57,   57,
-       57,   57,   57,   57,   57,    9,   57,   10,   57,   57,
-       57,   47,   57,   44,    3,    4,    5,    6,    7,    8,
-       11,   12,   13,   14,   15,   16,   57,   44,   57,   57,
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   57,
-
-       57,   57,   57,   57,   57,   57,   57,    3,   57,    4,
-       57,    5,   57,    6,   57,    7,   57,    8,   57,   11,
-       57,   12,   57,   13,   57,   14,   57,   15,   57,   16,
-       57,   57,   57,   57,   43,   46,   28,   29,   30,   31,
-       22,   43,   57,   46,   57,   28,   57,   29,   57,   30,
-       57,   31,   57,   57,   57,   57,   22,   57,   57,   57,
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   57,
-       57,   17,   24,   23,   41,   17,   57,   57,   57,   57,
-       57,   24,   57,   57,   57,   57,   23,   57,   57,   57,
-       57,   41,   57,   57,   57,   32,   26,   18,   20,   19,
-
-       25,   40,   42,   57,   32,   57,   57,   26,   57,   18,
-       57,   20,   57,   19,   57,   57,   25,   57,   57,   40,
-       57,   42,   57,   33,   27,   21,   33,   57,   57,   27,
-       57,   21,   57,   34,   34,   57
-    } ;
-
-static yyconst flex_int16_t yy_accept[546] =
-    {   0,
-        1,    2,    3,    4,    5,    6,    7,    9,   12,   14,
-       16,   18,   20,   21,   22,   23,   24,   26,   28,   30,
-       32,   34,   37,   41,   44,   47,   50,   52,   54,   56,
-       58,   61,   64,   67,   70,   71,   72,   72,   72,   72,
-       72,   72,   73,   75,   77,   78,   79,   80,   81,   82,
-       82,   82,   82,   82,   82,   83,   84,   85,   86,   87,
-       88,   88,   88,   88,   88,   88,   90,   91,   92,   93,
-       94,   95,   96,   96,   96,   96,   96,   96,   96,   96,
-       96,   96,   96,   96,   96,   96,   98,   99,  100,  101,
-      102,  103,  104,  105,  106,  107,  108,  109,  110,  111,
-
-      111,  111,  111,  111,  111,  111,  111,  111,  111,  111,
-      111,  111,  111,  111,  112,  112,  113,  114,  115,  116,
-      117,  118,  119,  120,  121,  122,  123,  124,  125,  126,
-      128,  129,  129,  129,  129,  129,  129,  129,  129,  129,
-      129,  129,  129,  129,  129,  129,  130,  131,  132,  133,
-      134,  135,  136,  137,  138,  139,  140,  141,  142,  143,
-      144,  145,  147,  149,  149,  149,  149,  150,  151,  151,
-      151,  151,  151,  151,  151,  151,  151,  152,  153,  154,
-      155,  156,  158,  160,  161,  162,  163,  164,  165,  166,
-      167,  168,  170,  172,  173,  173,  173,  173,  173,  173,
-
-      173,  173,  173,  173,  173,  173,  173,  175,  176,  177,
-      178,  179,  180,  181,  182,  183,  184,  185,  186,  187,
-      187,  187,  187,  187,  187,  187,  188,  188,  188,  188,
-      188,  188,  188,  188,  188,  189,  189,  189,  189,  190,
-      191,  192,  193,  194,  195,  197,  198,  199,  200,  201,
-      202,  203,  204,  205,  207,  208,  209,  210,  210,  210,
-      210,  210,  210,  210,  210,  210,  210,  210,  210,  210,
-      210,  210,  210,  210,  210,  210,  210,  210,  211,  212,
-      213,  214,  215,  216,  217,  218,  219,  220,  221,  222,
-      223,  224,  225,  226,  227,  228,  229,  230,  231,  231,
-
-      231,  231,  231,  231,  231,  231,  231,  231,  231,  231,
-      231,  231,  231,  231,  231,  231,  231,  232,  233,  233,
-      233,  233,  233,  233,  233,  234,  235,  235,  235,  236,
-      238,  239,  240,  241,  242,  243,  244,  245,  246,  247,
-      248,  249,  250,  251,  252,  253,  254,  255,  256,  258,
-      260,  261,  262,  263,  264,  265,  266,  268,  270,  271,
-      272,  274,  274,  275,  275,  275,  275,  275,  275,  275,
-      275,  275,  275,  275,  275,  275,  275,  275,  275,  275,
-      275,  275,  276,  277,  278,  279,  280,  281,  282,  283,
-      284,  285,  286,  287,  287,  287,  287,  288,  290,  291,
-
-      292,  293,  294,  295,  296,  297,  298,  299,  300,  301,
-      302,  303,  304,  305,  306,  307,  308,  310,  312,  314,
-      316,  318,  320,  322,  324,  326,  328,  330,  332,  333,
-      334,  335,  336,  337,  338,  339,  340,  341,  341,  341,
-      341,  342,  342,  342,  342,  342,  342,  342,  342,  342,
-      342,  342,  342,  342,  342,  344,  346,  348,  350,  352,
-      354,  355,  356,  357,  359,  360,  361,  362,  363,  364,
-      365,  366,  367,  368,  369,  370,  371,  372,  373,  373,
-      373,  373,  373,  374,  374,  374,  374,  375,  375,  375,
-      375,  376,  376,  376,  378,  379,  380,  381,  382,  384,
-
-      385,  386,  387,  389,  390,  391,  392,  394,  395,  396,
-      396,  397,  397,  398,  399,  400,  401,  401,  402,  402,
-      403,  404,  405,  407,  408,  410,  412,  414,  416,  417,
-      419,  420,  422,  424,  425,  425,  426,  427,  429,  430,
-      432,  434,  435,  437,  437
-    } ;
-
-static yyconst flex_int32_t yy_ec[256] =
-    {   0,
-        1,    1,    1,    1,    1,    1,    1,    1,    2,    3,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    2,    1,    4,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    5,    6,    7,
-        8,    9,   10,   11,    5,   12,    5,   13,   14,    1,
-        1,    1,    1,    1,   15,   16,   17,   18,   19,   20,
-       21,   22,   23,    1,    1,   24,   25,   26,   27,   28,
-       29,   30,   31,   32,   33,   34,    1,    1,   35,   36,
-       37,    1,   38,    1,   39,    1,    1,    1,    1,    1,
-
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,   40,    1,   41,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1
-    } ;
-
-static yyconst flex_int32_t yy_meta[42] =
-    {   0,
-        1,    1,    1,    2,    3,    3,    3,    3,    3,    3,
-        3,    3,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1
-    } ;
-
-static yyconst flex_int16_t yy_base[547] =
-    {   0,
-        0,    0,   41,    0,  610,  611,   81,   83,  611,    0,
-      611,  611,   56,  599,  580,  575,  611,  611,  611,  611,
-        0,   87,   89,   88,    0,    0,   70,  596,  577,  572,
-        0,    0,    0,    0,  101,    0,  584,  567,  569,  571,
-      569,    0,  103,    0,  579,  562,  564,  566,  564,  561,
-      564,  552,  551,   79,  557,  560,  548,  547,   80,  611,
-      566,   97,   87,  569,  560,    0,  563,  117,   90,  566,
-      557,  611,  549,   99,  552,  550,  557,  560,  546,  541,
-      118,  549,  556,  552,  533,    0,  538,  108,  541,  539,
-      546,  549,  535,  530,  126,  538,  545,  541,  522,  527,
-
-      531,  536,  523,  520,  522,  532,  518,  534,   95,  518,
-      528,  510,  524,  611,  525,  513,  517,  522,  509,  506,
-      508,  518,  504,  520,   97,  504,  514,  496,  510,    0,
-      511,  514,  500,  495,  520,  500,  492,  504,  499,  492,
-      481,  106,  496,  492,  498,  611,  611,  501,  487,  482,
-      507,  487,  479,  491,  486,  479,  468,  123,  483,  479,
-      485,    0,    0,  468,  475,  462,  611,  611,  470,  460,
-      464,  464,  126,  470,  126,  480,  611,  611,  459,  466,
-      453,    0,    0,  461,  451,  455,  455,  130,  461,  129,
-      471,    0,    0,  611,  452,  139,  469,  463,  463,  462,
-
-      158,  165,  459,  446,  450,  461,    0,  443,  141,  460,
-      454,  454,  453,  172,  179,  450,  437,  441,  452,  441,
-      435,  433,  438,  150,  424,  611,  451,  454,  451,  151,
-      448,  451,  448,  165,  611,  432,  440,  430,  427,  421,
-      419,  424,  157,  410,    0,  437,  440,  437,  170,  434,
-      437,  434,  172,    0,  418,  426,  416,  421,  421,  417,
-      397,  428,  425,  180,  177,  183,  186,  414,  413,  190,
-      192,  193,  412,  411,  405,  411,  408,  408,  408,  404,
-      384,  415,  412,  201,  196,  199,  206,  401,  400,  211,
-      212,  213,  399,  398,  392,  398,  395,  611,  390,  400,
-
-      380,  215,  217,  388,  382,  384,  381,  220,  223,  225,
-      387,  386,  385,  384,  383,  382,  611,  611,  381,  380,
-      379,  378,  377,  376,  611,  611,  218,  375,  611,    0,
-      370,  380,  360,  227,  236,  368,  362,  364,  361,  235,
-      241,  244,  367,  366,  365,  364,  363,  362,    0,    0,
-      361,  360,  359,  358,  357,  356,    0,    0,  237,  355,
-        0,  350,  611,  366,  352,  351,  350,  349,  352,  333,
-      338,  332,  336,  335,  335,  338,  332,  336,  331,  155,
-      334,  611,  611,  611,  611,  611,  611,  611,  611,  611,
-      611,  611,  611,  340,  335,  325,  329,    0,  345,  331,
-
-      330,  329,  328,  331,  312,  317,  311,  315,  314,  314,
-      317,  311,  315,  310,  168,  313,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,  319,  314,
-      304,  611,  611,  611,  611,  611,  611,  301,  314,  314,
-      611,  295,  301,  305,  310,  294,  308,  290,  294,  294,
-      292,  300,  287,  301,    0,    0,    0,    0,    0,    0,
-      285,  298,  298,    0,  279,  285,  289,  294,  278,  292,
-      274,  278,  278,  276,  284,  271,  285,  611,  275,  266,
-      281,  275,  611,  265,  262,  263,  611,  266,  270,  260,
-      611,  264,  270,    0,  263,  254,  269,  263,    0,  253,
-
-      250,  251,    0,  254,  258,  247,    0,  249,  255,  253,
-      611,  247,  611,  611,  611,  611,  249,  611,  234,  611,
-      611,  245,    0,  233,    0,    0,    0,    0,  234,    0,
-      222,    0,    0,  611,  207,  611,  611,    0,  186,    0,
-        0,  611,    0,  611,  106,  275
-    } ;
-
-static yyconst flex_int16_t yy_def[547] =
-    {   0,
-      544,    1,  544,    3,  544,  544,  544,  544,  544,  545,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  544,  545,  544,  544,  544,  544,
-      544,  546,  546,   24,  546,  546,  546,  546,  546,  544,
-      544,  544,  544,  544,  546,  546,  546,  546,  546,  544,
-      544,  544,  544,  544,  544,  546,  546,  546,  546,  546,
-      546,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  544,
-
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  544,  544,  544,  544,  544,  544,  544,
-
-      544,  544,  544,  544,  544,  544,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  544,  544,  544,
-
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  546,  546,  546,  546,
-
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  546,  546,  546,  546,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  546,  546,  546,  546,  546,  546,  546,
-
-      546,  546,  546,  546,  546,  546,  546,  546,  546,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  546,  546,  546,  546,  546,  546,  546,  546,  546,
-      546,  546,  546,  544,  544,  544,  544,  546,  546,  546,
-      546,  544,  546,    0,  544,  544
-    } ;
-
-static yyconst flex_int16_t yy_nxt[653] =
-    {   0,
-        6,    7,    8,    9,   10,   10,   10,   10,   10,   10,
-       10,   10,   11,   12,    6,    6,   13,    6,    6,    6,
-        6,   14,    6,    6,    6,    6,   15,    6,    6,    6,
-       16,    6,    6,    6,    6,    6,   17,   18,    6,   19,
-       20,   21,   22,   23,    9,   24,   24,   24,   24,   24,
-       24,   24,   24,   25,   26,   21,   21,   27,   21,   21,
-       21,   21,   28,   21,   21,   21,   21,   29,   21,   21,
-       21,   30,   21,   21,   21,   21,   21,   31,   32,   21,
-       33,   34,   35,   35,   35,   35,   37,   38,   43,   43,
-       43,   43,   44,   44,   44,   44,   44,   44,   44,   44,
-
-       45,   46,   35,   35,   43,   43,   64,   70,   36,   65,
-       71,   73,  141,   74,  157,   75,   76,   82,   83,   77,
-       96,   97,   78,   79,  142,  101,  158,   80,  174,  102,
-       81,   87,  110,   88,  117,   89,   90,  103,  118,   91,
-      126,  111,   92,   93,  175,  189,  119,   94,  201,  127,
-       95,  204,  214,  221,  217,  240,  205,  262,  202,  218,
-      263,  190,  215,  227,  282,  228,  268,  283,  229,  230,
-      231,  222,  232,  241,  269,  233,  234,  246,  449,  247,
-      273,  450,  248,  249,  250,  288,  251,  293,  274,  252,
-      253,  472,  311,  289,  473,  294,  304,  305,  313,  306,
-
-      312,  315,  307,  308,  543,  319,  314,  321,  323,  316,
-      309,  343,  310,  320,  345,  322,  324,  336,  337,  344,
-      338,  347,  346,  339,  340,  542,  351,  353,  355,  348,
-      365,  341,  367,  342,  352,  354,  356,  373,  366,  376,
-      368,  378,  400,  374,  377,  394,  375,  379,  380,  395,
-      401,  402,  408,  541,  540,  381,  539,  411,  409,  403,
-      413,  410,  412,  538,  429,  537,  414,  415,  430,  536,
-      535,  534,  533,  532,  416,   42,  531,   42,  530,  529,
-      528,  527,  526,  525,  524,  523,  522,  521,  520,  519,
-      518,  517,  516,  515,  514,  513,  512,  511,  510,  509,
-
-      508,  507,  506,  505,  504,  503,  502,  501,  500,  499,
-      498,  497,  496,  495,  494,  493,  492,  491,  490,  489,
-      488,  487,  486,  485,  484,  483,  482,  481,  480,  479,
-      478,  477,  476,  475,  474,  471,  470,  469,  468,  467,
-      466,  465,  464,  463,  462,  461,  460,  459,  458,  457,
-      456,  455,  454,  453,  452,  451,  448,  447,  446,  445,
-      444,  443,  442,  441,  440,  439,  438,  437,  436,  435,
-      434,  433,  432,  431,  428,  427,  426,  425,  424,  423,
-      422,  421,  420,  419,  418,  417,  407,  406,  405,  404,
-      399,  398,  397,  396,  393,  392,  391,  390,  389,  388,
-
-      387,  386,  385,  384,  383,  382,  372,  371,  370,  369,
-      364,  363,  362,  361,  360,  359,  358,  357,  350,  349,
-      335,  334,  333,  332,  331,  330,  329,  328,  327,  326,
-      325,  318,  317,  303,  302,  301,  300,  299,  298,  297,
-      296,  295,  292,  291,  290,  287,  286,  285,  284,  281,
-      280,  279,  278,  277,  276,  275,  272,  271,  270,  267,
-      266,  265,  264,  261,  260,  259,  258,  257,  256,  255,
-      254,  245,  244,  243,  242,  239,  238,  237,  236,  235,
-      226,  225,  224,  223,  220,  219,  216,  213,  212,  211,
-      210,  209,  208,  207,  206,  203,  200,  199,  198,  197,
-
-      196,  195,  194,  193,  192,  191,  188,  187,  186,  185,
-      184,  183,  182,  181,  180,  179,  178,  177,  176,  173,
-      172,  171,  170,  169,  168,  167,  166,  165,  164,  163,
-      162,  161,  160,  159,  156,  155,  154,  153,  152,  151,
-      150,  149,  148,  147,  146,  145,  144,  143,  140,  139,
-      138,  137,  136,  135,  134,  133,  132,  131,  130,  129,
-      128,  125,  124,  123,  122,  121,  120,  116,  115,  114,
-      113,  112,  109,  108,  107,  106,  105,  104,  100,   99,
-       98,   86,   85,   84,   72,   69,   68,   67,   66,   63,
-       62,   61,   60,   59,   58,   57,   56,   55,   54,   53,
-
-       52,   51,   50,   49,   48,   47,   41,   40,   39,  544,
-        5,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544
-    } ;
-
-static yyconst flex_int16_t yy_chk[653] =
-    {   0,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    3,    3,    3,    3,    3,    3,    3,    3,    3,
-        3,    3,    3,    3,    3,    3,    3,    3,    3,    3,
-        3,    3,    3,    3,    3,    3,    3,    3,    3,    3,
-        3,    3,    3,    3,    3,    3,    3,    3,    3,    3,
-        3,    3,    7,    7,    8,    8,   13,   13,   22,   22,
-       23,   23,   24,   24,   24,   24,   24,   24,   24,   24,
-
-       27,   27,   35,   35,   43,   43,   54,   59,  545,   54,
-       59,   62,  109,   62,  125,   62,   62,   63,   63,   62,
-       69,   69,   62,   62,  109,   74,  125,   62,  142,   74,
-       62,   68,   81,   68,   88,   68,   68,   74,   88,   68,
-       95,   81,   68,   68,  142,  158,   88,   68,  173,   95,
-       68,  175,  188,  196,  190,  209,  175,  224,  173,  190,
-      224,  158,  188,  201,  243,  201,  230,  243,  201,  201,
-      202,  196,  202,  209,  230,  202,  202,  214,  380,  214,
-      234,  380,  214,  214,  215,  249,  215,  253,  234,  215,
-      215,  415,  265,  249,  415,  253,  264,  264,  266,  264,
-
-      265,  267,  264,  264,  539,  270,  266,  271,  272,  267,
-      264,  285,  264,  270,  286,  271,  272,  284,  284,  285,
-      284,  287,  286,  284,  284,  535,  290,  291,  292,  287,
-      302,  284,  303,  284,  290,  291,  292,  308,  302,  309,
-      303,  310,  334,  308,  309,  327,  308,  310,  310,  327,
-      334,  335,  340,  531,  529,  310,  524,  341,  340,  335,
-      342,  340,  341,  522,  359,  519,  342,  342,  359,  517,
-      512,  510,  509,  508,  342,  546,  506,  546,  505,  504,
-      502,  501,  500,  498,  497,  496,  495,  493,  492,  490,
-      489,  488,  486,  485,  484,  482,  481,  480,  479,  477,
-
-      476,  475,  474,  473,  472,  471,  470,  469,  468,  467,
-      466,  465,  463,  462,  461,  454,  453,  452,  451,  450,
-      449,  448,  447,  446,  445,  444,  443,  442,  440,  439,
-      438,  431,  430,  429,  416,  414,  413,  412,  411,  410,
-      409,  408,  407,  406,  405,  404,  403,  402,  401,  400,
-      399,  397,  396,  395,  394,  381,  379,  378,  377,  376,
-      375,  374,  373,  372,  371,  370,  369,  368,  367,  366,
-      365,  364,  362,  360,  356,  355,  354,  353,  352,  351,
-      348,  347,  346,  345,  344,  343,  339,  338,  337,  336,
-      333,  332,  331,  328,  324,  323,  322,  321,  320,  319,
-
-      316,  315,  314,  313,  312,  311,  307,  306,  305,  304,
-      301,  300,  299,  297,  296,  295,  294,  293,  289,  288,
-      283,  282,  281,  280,  279,  278,  277,  276,  275,  274,
-      273,  269,  268,  263,  262,  261,  260,  259,  258,  257,
-      256,  255,  252,  251,  250,  248,  247,  246,  244,  242,
-      241,  240,  239,  238,  237,  236,  233,  232,  231,  229,
-      228,  227,  225,  223,  222,  221,  220,  219,  218,  217,
-      216,  213,  212,  211,  210,  208,  206,  205,  204,  203,
-      200,  199,  198,  197,  195,  191,  189,  187,  186,  185,
-      184,  181,  180,  179,  176,  174,  172,  171,  170,  169,
-
-      166,  165,  164,  161,  160,  159,  157,  156,  155,  154,
-      153,  152,  151,  150,  149,  148,  145,  144,  143,  141,
-      140,  139,  138,  137,  136,  135,  134,  133,  132,  131,
-      129,  128,  127,  126,  124,  123,  122,  121,  120,  119,
-      118,  117,  116,  115,  113,  112,  111,  110,  108,  107,
-      106,  105,  104,  103,  102,  101,  100,   99,   98,   97,
-       96,   94,   93,   92,   91,   90,   89,   87,   85,   84,
-       83,   82,   80,   79,   78,   77,   76,   75,   73,   71,
-       70,   67,   65,   64,   61,   58,   57,   56,   55,   53,
-       52,   51,   50,   49,   48,   47,   46,   45,   41,   40,
-
-       39,   38,   37,   30,   29,   28,   16,   15,   14,    5,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544,  544,  544,  544,  544,  544,  544,  544,  544,
-      544,  544
-    } ;
-
-extern int H5LTyy_flex_debug;
-int H5LTyy_flex_debug = 0;
-
-static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
-static char *yy_full_match;
-static int yy_lp;
-#define REJECT \
-{ \
-*yy_cp = (yy_hold_char); /* undo effects of setting up H5LTyytext */ \
-yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
-++(yy_lp); \
-goto find_rule; \
-}
-
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *H5LTyytext;
-#line 1 "H5LTanalyze.l"
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group.                                               *
- * Copyright by the Board of Trustees of the University of Illinois.         *
- * All rights reserved.                                                      *
- *                                                                           *
- * This file is part of HDF5.  The full HDF5 copyright notice, including     *
- * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-#line 17 "H5LTanalyze.l"
-#include <stdlib.h>
-#include <string.h>
-#include <hdf5.h>
-#include "H5LTparse.h"
-
-int my_yyinput(char *, int);
-#undef YY_INPUT
-#define YY_INPUT(b, r, ms) (r=my_yyinput(b, ms))
-#define token(x)        (int)x
-#define hid(x)          (hid_t)x
-
-#ifdef  YY_BUF_SIZE
-#undef  YY_BUF_SIZE
-#endif
-#define YY_BUF_SIZE        262144    /*Define read buffer to be 256K*/
-
-extern char *myinput;
-extern size_t input_len;
-
-#define STACK_SIZE      16
-
-/*variables for compound type*/
-struct cmpd_info {
-    hid_t       id;
-    hbool_t         is_field;
-    hbool_t         first_memb;
-};
-extern struct cmpd_info cmpd_stack[STACK_SIZE];
-extern int csindex;
-
-/*variables for array type*/
-struct arr_info {
-    hsize_t             dims[H5S_MAX_RANK];
-    int                 ndim;
-    hbool_t             is_dim;
-};
-extern struct arr_info arr_stack[STACK_SIZE];
-extern int asindex;
-
-/*variables for enumerate type*/
-extern hbool_t     is_enum;
-extern hbool_t     is_enum_memb;
-
-/*variables for string type*/
-extern hbool_t is_str_size;
-
-/*variables for opaque type*/
-extern hbool_t is_opq_size;
-extern hbool_t is_opq_tag;
-
-hbool_t        first_quote = 1;
-
-
-#line 917 "H5LTanalyze.c"
-
-#define INITIAL 0
-#define TAG_STRING 1
-
-#ifndef YY_EXTRA_TYPE
-#define YY_EXTRA_TYPE void *
-#endif
-
-static int yy_init_globals (void );
-
-/* Accessor methods to globals.
-   These are made visible to non-reentrant scanners for convenience. */
-
-int H5LTyylex_destroy (void );
-
-int H5LTyyget_debug (void );
-
-void H5LTyyset_debug (int debug_flag  );
-
-YY_EXTRA_TYPE H5LTyyget_extra (void );
-
-void H5LTyyset_extra (YY_EXTRA_TYPE user_defined  );
-
-FILE *H5LTyyget_in (void );
-
-void H5LTyyset_in  (FILE * in_str  );
-
-FILE *H5LTyyget_out (void );
-
-void H5LTyyset_out  (FILE * out_str  );
-
-yy_size_t H5LTyyget_leng (void );
-
-char *H5LTyyget_text (void );
-
-int H5LTyyget_lineno (void );
-
-void H5LTyyset_lineno (int line_number  );
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int H5LTyywrap (void );
-#else
-extern int H5LTyywrap (void );
-#endif
-#endif
-
-    static void yyunput (int c,char *buf_ptr  );
-    
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char *,yyconst char *,int );
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * );
-#endif
-
-#ifndef YY_NO_INPUT
-
-#ifdef __cplusplus
-static int yyinput (void );
-#else
-static int input (void );
-#endif
-
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO do { if (fwrite( H5LTyytext, H5LTyyleng, 1, H5LTyyout )) {} } while (0)
-#endif
-
-/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
-	if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
-		{ \
-		int c = '*'; \
-		size_t n; \
-		for ( n = 0; n < max_size && \
-			     (c = getc( H5LTyyin )) != EOF && c != '\n'; ++n ) \
-			buf[n] = (char) c; \
-		if ( c == '\n' ) \
-			buf[n++] = (char) c; \
-		if ( c == EOF && ferror( H5LTyyin ) ) \
-			YY_FATAL_ERROR( "input in flex scanner failed" ); \
-		result = n; \
-		} \
-	else \
-		{ \
-		errno=0; \
-		while ( (result = fread(buf, 1, max_size, H5LTyyin))==0 && ferror(H5LTyyin)) \
-			{ \
-			if( errno != EINTR) \
-				{ \
-				YY_FATAL_ERROR( "input in flex scanner failed" ); \
-				break; \
-				} \
-			errno=0; \
-			clearerr(H5LTyyin); \
-			} \
-		}\
-\
-
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* end tables serialization structures and prototypes */
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL_IS_OURS 1
-
-extern int H5LTyylex (void);
-
-#define YY_DECL int H5LTyylex (void)
-#endif /* !YY_DECL */
-
-/* Code executed at the beginning of each rule, after H5LTyytext and H5LTyyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
-	YY_USER_ACTION
-
-/** The main scanner function which does all the work.
- */
-YY_DECL
-{
-	register yy_state_type yy_current_state;
-	register char *yy_cp, *yy_bp;
-	register int yy_act;
-    
-#line 73 "H5LTanalyze.l"
-
-
-#line 1095 "H5LTanalyze.c"
-
-	if ( !(yy_init) )
-		{
-		(yy_init) = 1;
-
-#ifdef YY_USER_INIT
-		YY_USER_INIT;
-#endif
-
-        /* Create the reject buffer large enough to save one state per allowed character. */
-        if ( ! (yy_state_buf) )
-            (yy_state_buf) = (yy_state_type *)H5LTyyalloc(YY_STATE_BUF_SIZE  );
-            if ( ! (yy_state_buf) )
-                YY_FATAL_ERROR( "out of dynamic memory in H5LTyylex()" );
-
-		if ( ! (yy_start) )
-			(yy_start) = 1;	/* first start state */
-
-		if ( ! H5LTyyin )
-			H5LTyyin = stdin;
-
-		if ( ! H5LTyyout )
-			H5LTyyout = stdout;
-
-		if ( ! YY_CURRENT_BUFFER ) {
-			H5LTyyensure_buffer_stack ();
-			YY_CURRENT_BUFFER_LVALUE =
-				H5LTyy_create_buffer(H5LTyyin,YY_BUF_SIZE );
-		}
-
-		H5LTyy_load_buffer_state( );
-		}
-
-	while ( 1 )		/* loops until end-of-file is reached */
-		{
-		yy_cp = (yy_c_buf_p);
-
-		/* Support of H5LTyytext. */
-		*yy_cp = (yy_hold_char);
-
-		/* yy_bp points to the position in yy_ch_buf of the start of
-		 * the current run.
-		 */
-		yy_bp = yy_cp;
-
-		yy_current_state = (yy_start);
-
-		(yy_state_ptr) = (yy_state_buf);
-		*(yy_state_ptr)++ = yy_current_state;
-
-yy_match:
-		do
-			{
-			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
-			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-				{
-				yy_current_state = (int) yy_def[yy_current_state];
-				if ( yy_current_state >= 545 )
-					yy_c = yy_meta[(unsigned int) yy_c];
-				}
-			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-			*(yy_state_ptr)++ = yy_current_state;
-			++yy_cp;
-			}
-		while ( yy_base[yy_current_state] != 611 );
-
-yy_find_action:
-		yy_current_state = *--(yy_state_ptr);
-		(yy_lp) = yy_accept[yy_current_state];
-find_rule: /* we branch to this label when backing up */
-		for ( ; ; ) /* until we find what rule we matched */
-			{
-			if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
-				{
-				yy_act = yy_acclist[(yy_lp)];
-					{
-					(yy_full_match) = yy_cp;
-					break;
-					}
-				}
-			--yy_cp;
-			yy_current_state = *--(yy_state_ptr);
-			(yy_lp) = yy_accept[yy_current_state];
-			}
-
-		YY_DO_BEFORE_ACTION;
-
-do_action:	/* This label is used only to access EOF actions. */
-
-		switch ( yy_act )
-	{ /* beginning of action switch */
-case 1:
-YY_RULE_SETUP
-#line 75 "H5LTanalyze.l"
-{return hid(H5T_STD_I8BE_TOKEN);}
-	YY_BREAK
-case 2:
-YY_RULE_SETUP
-#line 76 "H5LTanalyze.l"
-{return hid(H5T_STD_I8LE_TOKEN);}
-	YY_BREAK
-case 3:
-YY_RULE_SETUP
-#line 77 "H5LTanalyze.l"
-{return hid(H5T_STD_I16BE_TOKEN);}
-	YY_BREAK
-case 4:
-YY_RULE_SETUP
-#line 78 "H5LTanalyze.l"
-{return hid(H5T_STD_I16LE_TOKEN);}
-	YY_BREAK
-case 5:
-YY_RULE_SETUP
-#line 79 "H5LTanalyze.l"
-{return hid(H5T_STD_I32BE_TOKEN);}
-	YY_BREAK
-case 6:
-YY_RULE_SETUP
-#line 80 "H5LTanalyze.l"
-{return hid(H5T_STD_I32LE_TOKEN);}
-	YY_BREAK
-case 7:
-YY_RULE_SETUP
-#line 81 "H5LTanalyze.l"
-{return hid(H5T_STD_I64BE_TOKEN);}
-	YY_BREAK
-case 8:
-YY_RULE_SETUP
-#line 82 "H5LTanalyze.l"
-{return hid(H5T_STD_I64LE_TOKEN);}
-	YY_BREAK
-case 9:
-YY_RULE_SETUP
-#line 84 "H5LTanalyze.l"
-{return hid(H5T_STD_U8BE_TOKEN);}
-	YY_BREAK
-case 10:
-YY_RULE_SETUP
-#line 85 "H5LTanalyze.l"
-{return hid(H5T_STD_U8LE_TOKEN);}
-	YY_BREAK
-case 11:
-YY_RULE_SETUP
-#line 86 "H5LTanalyze.l"
-{return hid(H5T_STD_U16BE_TOKEN);}
-	YY_BREAK
-case 12:
-YY_RULE_SETUP
-#line 87 "H5LTanalyze.l"
-{return hid(H5T_STD_U16LE_TOKEN);}
-	YY_BREAK
-case 13:
-YY_RULE_SETUP
-#line 88 "H5LTanalyze.l"
-{return hid(H5T_STD_U32BE_TOKEN);}
-	YY_BREAK
-case 14:
-YY_RULE_SETUP
-#line 89 "H5LTanalyze.l"
-{return hid(H5T_STD_U32LE_TOKEN);}
-	YY_BREAK
-case 15:
-YY_RULE_SETUP
-#line 90 "H5LTanalyze.l"
-{return hid(H5T_STD_U64BE_TOKEN);}
-	YY_BREAK
-case 16:
-YY_RULE_SETUP
-#line 91 "H5LTanalyze.l"
-{return hid(H5T_STD_U64LE_TOKEN);}
-	YY_BREAK
-case 17:
-YY_RULE_SETUP
-#line 93 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_CHAR_TOKEN);}
-	YY_BREAK
-case 18:
-YY_RULE_SETUP
-#line 94 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_SCHAR_TOKEN);}
-	YY_BREAK
-case 19:
-YY_RULE_SETUP
-#line 95 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_UCHAR_TOKEN);}
-	YY_BREAK
-case 20:
-YY_RULE_SETUP
-#line 96 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_SHORT_TOKEN);}
-	YY_BREAK
-case 21:
-YY_RULE_SETUP
-#line 97 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_USHORT_TOKEN);}
-	YY_BREAK
-case 22:
-YY_RULE_SETUP
-#line 98 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_INT_TOKEN);}
-	YY_BREAK
-case 23:
-YY_RULE_SETUP
-#line 99 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_UINT_TOKEN);}
-	YY_BREAK
-case 24:
-YY_RULE_SETUP
-#line 100 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_LONG_TOKEN);}
-	YY_BREAK
-case 25:
-YY_RULE_SETUP
-#line 101 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_ULONG_TOKEN);}
-	YY_BREAK
-case 26:
-YY_RULE_SETUP
-#line 102 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_LLONG_TOKEN);}
-	YY_BREAK
-case 27:
-YY_RULE_SETUP
-#line 103 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_ULLONG_TOKEN);}
-	YY_BREAK
-case 28:
-YY_RULE_SETUP
-#line 105 "H5LTanalyze.l"
-{return hid(H5T_IEEE_F32BE_TOKEN);}
-	YY_BREAK
-case 29:
-YY_RULE_SETUP
-#line 106 "H5LTanalyze.l"
-{return hid(H5T_IEEE_F32LE_TOKEN);}
-	YY_BREAK
-case 30:
-YY_RULE_SETUP
-#line 107 "H5LTanalyze.l"
-{return hid(H5T_IEEE_F64BE_TOKEN);}
-	YY_BREAK
-case 31:
-YY_RULE_SETUP
-#line 108 "H5LTanalyze.l"
-{return hid(H5T_IEEE_F64LE_TOKEN);}
-	YY_BREAK
-case 32:
-YY_RULE_SETUP
-#line 109 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_FLOAT_TOKEN);}
-	YY_BREAK
-case 33:
-YY_RULE_SETUP
-#line 110 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_DOUBLE_TOKEN);}
-	YY_BREAK
-case 34:
-YY_RULE_SETUP
-#line 111 "H5LTanalyze.l"
-{return hid(H5T_NATIVE_LDOUBLE_TOKEN);}
-	YY_BREAK
-case 35:
-YY_RULE_SETUP
-#line 113 "H5LTanalyze.l"
-{return token(H5T_STRING_TOKEN);}
-	YY_BREAK
-case 36:
-YY_RULE_SETUP
-#line 114 "H5LTanalyze.l"
-{return token(STRSIZE_TOKEN);}
-	YY_BREAK
-case 37:
-YY_RULE_SETUP
-#line 115 "H5LTanalyze.l"
-{return token(STRPAD_TOKEN);}
-	YY_BREAK
-case 38:
-YY_RULE_SETUP
-#line 116 "H5LTanalyze.l"
-{return token(CSET_TOKEN);}
-	YY_BREAK
-case 39:
-YY_RULE_SETUP
-#line 117 "H5LTanalyze.l"
-{return token(CTYPE_TOKEN);}
-	YY_BREAK
-case 40:
-YY_RULE_SETUP
-#line 118 "H5LTanalyze.l"
-{return token(H5T_STR_NULLTERM_TOKEN);} 
-	YY_BREAK
-case 41:
-YY_RULE_SETUP
-#line 119 "H5LTanalyze.l"
-{return token(H5T_STR_NULLPAD_TOKEN);} 
-	YY_BREAK
-case 42:
-YY_RULE_SETUP
-#line 120 "H5LTanalyze.l"
-{return token(H5T_STR_SPACEPAD_TOKEN);} 
-	YY_BREAK
-case 43:
-YY_RULE_SETUP
-#line 121 "H5LTanalyze.l"
-{return token(H5T_CSET_ASCII_TOKEN);}
-	YY_BREAK
-case 44:
-YY_RULE_SETUP
-#line 122 "H5LTanalyze.l"
-{return token(H5T_CSET_UTF8_TOKEN);}
-	YY_BREAK
-case 45:
-YY_RULE_SETUP
-#line 123 "H5LTanalyze.l"
-{return token(H5T_C_S1_TOKEN);}
-	YY_BREAK
-case 46:
-YY_RULE_SETUP
-#line 124 "H5LTanalyze.l"
-{return token(H5T_FORTRAN_S1_TOKEN);}
-	YY_BREAK
-case 47:
-YY_RULE_SETUP
-#line 125 "H5LTanalyze.l"
-{return token(H5T_VARIABLE_TOKEN);}
-	YY_BREAK
-case 48:
-YY_RULE_SETUP
-#line 127 "H5LTanalyze.l"
-{return token(H5T_COMPOUND_TOKEN);}
-	YY_BREAK
-case 49:
-YY_RULE_SETUP
-#line 128 "H5LTanalyze.l"
-{return token(H5T_ENUM_TOKEN);}
-	YY_BREAK
-case 50:
-YY_RULE_SETUP
-#line 129 "H5LTanalyze.l"
-{return token(H5T_ARRAY_TOKEN);}
-	YY_BREAK
-case 51:
-YY_RULE_SETUP
-#line 130 "H5LTanalyze.l"
-{return token(H5T_VLEN_TOKEN);}
-	YY_BREAK
-case 52:
-YY_RULE_SETUP
-#line 132 "H5LTanalyze.l"
-{return token(H5T_OPAQUE_TOKEN);}
-	YY_BREAK
-case 53:
-YY_RULE_SETUP
-#line 133 "H5LTanalyze.l"
-{return token(OPQ_SIZE_TOKEN);}
-	YY_BREAK
-case 54:
-YY_RULE_SETUP
-#line 134 "H5LTanalyze.l"
-{return token(OPQ_TAG_TOKEN);}
-	YY_BREAK
-case 55:
-YY_RULE_SETUP
-#line 136 "H5LTanalyze.l"
-{    
-                        if( is_str_size || (is_enum && is_enum_memb) || 
-                            is_opq_size || (asindex>-1 && arr_stack[asindex].is_dim) ||
-                            (csindex>-1 && cmpd_stack[csindex].is_field) ) {
-                            H5LTyylval.ival = atoi(H5LTyytext);
-                            return NUMBER; 
-                        } else
-                            REJECT;
-                 }
-	YY_BREAK
-case 56:
-YY_RULE_SETUP
-#line 146 "H5LTanalyze.l"
-{
-                    /*if it's first quote, and is a compound field name or an enum symbol*/
-                    if((is_opq_tag || is_enum || (csindex>-1 && cmpd_stack[csindex].is_field)) 
-                        && first_quote) {
-                        first_quote = 0;
-                        BEGIN TAG_STRING;
-                    } else /*if it's second quote*/
-                        first_quote = 1;
-                    return token('"');
-                 }
-	YY_BREAK
-case 57:
-/* rule 57 can match eol */
-YY_RULE_SETUP
-#line 156 "H5LTanalyze.l"
-{
-#ifdef H5_HAVE_WIN32_API
-                    H5LTyylval.sval = _strdup(H5LTyytext);
-#else /* H5_HAVE_WIN32_API */
-                    H5LTyylval.sval = strdup(H5LTyytext);
-#endif  /* H5_HAVE_WIN32_API */
-                    BEGIN INITIAL;
-                    return STRING;
-                 }
-	YY_BREAK
-case 58:
-YY_RULE_SETUP
-#line 166 "H5LTanalyze.l"
-{return token('{');}
-	YY_BREAK
-case 59:
-YY_RULE_SETUP
-#line 167 "H5LTanalyze.l"
-{return token('}');}
-	YY_BREAK
-case 60:
-YY_RULE_SETUP
-#line 168 "H5LTanalyze.l"
-{return token('[');}
-	YY_BREAK
-case 61:
-YY_RULE_SETUP
-#line 169 "H5LTanalyze.l"
-{return token(']');}
-	YY_BREAK
-case 62:
-YY_RULE_SETUP
-#line 170 "H5LTanalyze.l"
-{return token(':');}
-	YY_BREAK
-case 63:
-YY_RULE_SETUP
-#line 171 "H5LTanalyze.l"
-{return token(';');}
-	YY_BREAK
-case 64:
-/* rule 64 can match eol */
-YY_RULE_SETUP
-#line 172 "H5LTanalyze.l"
-;
-	YY_BREAK
-case 65:
-/* rule 65 can match eol */
-YY_RULE_SETUP
-#line 173 "H5LTanalyze.l"
-{ return 0; }
-	YY_BREAK
-case 66:
-YY_RULE_SETUP
-#line 175 "H5LTanalyze.l"
-ECHO;
-	YY_BREAK
-#line 1545 "H5LTanalyze.c"
-			case YY_STATE_EOF(INITIAL):
-			case YY_STATE_EOF(TAG_STRING):
-				yyterminate();
-
-	case YY_END_OF_BUFFER:
-		{
-		/* Amount of text matched not including the EOB char. */
-		int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
-		/* Undo the effects of YY_DO_BEFORE_ACTION. */
-		*yy_cp = (yy_hold_char);
-		YY_RESTORE_YY_MORE_OFFSET
-
-		if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
-			{
-			/* We're scanning a new file or input source.  It's
-			 * possible that this happened because the user
-			 * just pointed H5LTyyin at a new source and called
-			 * H5LTyylex().  If so, then we have to assure
-			 * consistency between YY_CURRENT_BUFFER and our
-			 * globals.  Here is the right place to do so, because
-			 * this is the first action (other than possibly a
-			 * back-up) that will match for the new input source.
-			 */
-			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
-			YY_CURRENT_BUFFER_LVALUE->yy_input_file = H5LTyyin;
-			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
-			}
-
-		/* Note that here we test for yy_c_buf_p "<=" to the position
-		 * of the first EOB in the buffer, since yy_c_buf_p will
-		 * already have been incremented past the NUL character
-		 * (since all states make transitions on EOB to the
-		 * end-of-buffer state).  Contrast this with the test
-		 * in input().
-		 */
-		if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
-			{ /* This was really a NUL. */
-			yy_state_type yy_next_state;
-
-			(yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
-			yy_current_state = yy_get_previous_state(  );
-
-			/* Okay, we're now positioned to make the NUL
-			 * transition.  We couldn't have
-			 * yy_get_previous_state() go ahead and do it
-			 * for us because it doesn't know how to deal
-			 * with the possibility of jamming (and we don't
-			 * want to build jamming into it because then it
-			 * will run more slowly).
-			 */
-
-			yy_next_state = yy_try_NUL_trans( yy_current_state );
-
-			yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
-			if ( yy_next_state )
-				{
-				/* Consume the NUL. */
-				yy_cp = ++(yy_c_buf_p);
-				yy_current_state = yy_next_state;
-				goto yy_match;
-				}
-
-			else
-				{
-				yy_cp = (yy_c_buf_p);
-				goto yy_find_action;
-				}
-			}
-
-		else switch ( yy_get_next_buffer(  ) )
-			{
-			case EOB_ACT_END_OF_FILE:
-				{
-				(yy_did_buffer_switch_on_eof) = 0;
-
-				if ( H5LTyywrap( ) )
-					{
-					/* Note: because we've taken care in
-					 * yy_get_next_buffer() to have set up
-					 * H5LTyytext, we can now set up
-					 * yy_c_buf_p so that if some total
-					 * hoser (like flex itself) wants to
-					 * call the scanner after we return the
-					 * YY_NULL, it'll still work - another
-					 * YY_NULL will get returned.
-					 */
-					(yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
-					yy_act = YY_STATE_EOF(YY_START);
-					goto do_action;
-					}
-
-				else
-					{
-					if ( ! (yy_did_buffer_switch_on_eof) )
-						YY_NEW_FILE;
-					}
-				break;
-				}
-
-			case EOB_ACT_CONTINUE_SCAN:
-				(yy_c_buf_p) =
-					(yytext_ptr) + yy_amount_of_matched_text;
-
-				yy_current_state = yy_get_previous_state(  );
-
-				yy_cp = (yy_c_buf_p);
-				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-				goto yy_match;
-
-			case EOB_ACT_LAST_MATCH:
-				(yy_c_buf_p) =
-				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
-				yy_current_state = yy_get_previous_state(  );
-
-				yy_cp = (yy_c_buf_p);
-				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-				goto yy_find_action;
-			}
-		break;
-		}
-
-	default:
-		YY_FATAL_ERROR(
-			"fatal flex scanner internal error--no action found" );
-	} /* end of action switch */
-		} /* end of scanning one token */
-} /* end of H5LTyylex */
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- *	EOB_ACT_LAST_MATCH -
- *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- *	EOB_ACT_END_OF_FILE - end of file
- */
-static int yy_get_next_buffer (void)
-{
-    	register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
-	register char *source = (yytext_ptr);
-	register int number_to_move, i;
-	int ret_val;
-
-	if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
-		YY_FATAL_ERROR(
-		"fatal flex scanner internal error--end of buffer missed" );
-
-	if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
-		{ /* Don't try to fill the buffer, so this is an EOF. */
-		if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
-			{
-			/* We matched a single character, the EOB, so
-			 * treat this as a final EOF.
-			 */
-			return EOB_ACT_END_OF_FILE;
-			}
-
-		else
-			{
-			/* We matched some text prior to the EOB, first
-			 * process it.
-			 */
-			return EOB_ACT_LAST_MATCH;
-			}
-		}
-
-	/* Try to read more data. */
-
-	/* First move last chars to start of buffer. */
-	number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
-	for ( i = 0; i < number_to_move; ++i )
-		*(dest++) = *(source++);
-
-	if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
-		/* don't do the read, it's not guaranteed to return an EOF,
-		 * just force an EOF
-		 */
-		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
-	else
-		{
-			yy_size_t num_to_read =
-			YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
-		while ( num_to_read <= 0 )
-			{ /* Not enough room in the buffer - grow it. */
-
-			YY_FATAL_ERROR(
-"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
-
-			}
-
-		if ( num_to_read > YY_READ_BUF_SIZE )
-			num_to_read = YY_READ_BUF_SIZE;
-
-		/* Read in more data. */
-		YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
-			(yy_n_chars), num_to_read );
-
-		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
-		}
-
-	if ( (yy_n_chars) == 0 )
-		{
-		if ( number_to_move == YY_MORE_ADJ )
-			{
-			ret_val = EOB_ACT_END_OF_FILE;
-			H5LTyyrestart(H5LTyyin  );
-			}
-
-		else
-			{
-			ret_val = EOB_ACT_LAST_MATCH;
-			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
-				YY_BUFFER_EOF_PENDING;
-			}
-		}
-
-	else
-		ret_val = EOB_ACT_CONTINUE_SCAN;
-
-	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
-		/* Extend the array by 50%, plus the number we really need. */
-		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
-		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) H5LTyyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
-		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
-			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
-	}
-
-	(yy_n_chars) += number_to_move;
-	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
-	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
-	(yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
-	return ret_val;
-}
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
-    static yy_state_type yy_get_previous_state (void)
-{
-	register yy_state_type yy_current_state;
-	register char *yy_cp;
-    
-	yy_current_state = (yy_start);
-
-	(yy_state_ptr) = (yy_state_buf);
-	*(yy_state_ptr)++ = yy_current_state;
-
-	for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
-		{
-		register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
-		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-			{
-			yy_current_state = (int) yy_def[yy_current_state];
-			if ( yy_current_state >= 545 )
-				yy_c = yy_meta[(unsigned int) yy_c];
-			}
-		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-		*(yy_state_ptr)++ = yy_current_state;
-		}
-
-	return yy_current_state;
-}
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- *	next_state = yy_try_NUL_trans( current_state );
- */
-    static yy_state_type yy_try_NUL_trans  (yy_state_type yy_current_state )
-{
-	register int yy_is_jam;
-    
-	register YY_CHAR yy_c = 1;
-	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-		{
-		yy_current_state = (int) yy_def[yy_current_state];
-		if ( yy_current_state >= 545 )
-			yy_c = yy_meta[(unsigned int) yy_c];
-		}
-	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-	yy_is_jam = (yy_current_state == 544);
-	if ( ! yy_is_jam )
-		*(yy_state_ptr)++ = yy_current_state;
-
-		return yy_is_jam ? 0 : yy_current_state;
-}
-
-    static void yyunput (int c, register char * yy_bp )
-{
-	register char *yy_cp;
-    
-    yy_cp = (yy_c_buf_p);
-
-	/* undo effects of setting up H5LTyytext */
-	*yy_cp = (yy_hold_char);
-
-	if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
-		{ /* need to shift things up to make room */
-		/* +2 for EOB chars. */
-		register yy_size_t number_to_move = (yy_n_chars) + 2;
-		register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
-					YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
-		register char *source =
-				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
-
-		while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
-			*--dest = *--source;
-
-		yy_cp += (int) (dest - source);
-		yy_bp += (int) (dest - source);
-		YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
-			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
-
-		if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
-			YY_FATAL_ERROR( "flex scanner push-back overflow" );
-		}
-
-	*--yy_cp = (char) c;
-
-	(yytext_ptr) = yy_bp;
-	(yy_hold_char) = *yy_cp;
-	(yy_c_buf_p) = yy_cp;
-}
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
-    static int yyinput (void)
-#else
-    static int input  (void)
-#endif
-
-{
-	int c;
-    
-	*(yy_c_buf_p) = (yy_hold_char);
-
-	if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
-		{
-		/* yy_c_buf_p now points to the character we want to return.
-		 * If this occurs *before* the EOB characters, then it's a
-		 * valid NUL; if not, then we've hit the end of the buffer.
-		 */
-		if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
-			/* This was really a NUL. */
-			*(yy_c_buf_p) = '\0';
-
-		else
-			{ /* need more input */
-			yy_size_t offset = (yy_c_buf_p) - (yytext_ptr);
-			++(yy_c_buf_p);
-
-			switch ( yy_get_next_buffer(  ) )
-				{
-				case EOB_ACT_LAST_MATCH:
-					/* This happens because yy_g_n_b()
-					 * sees that we've accumulated a
-					 * token and flags that we need to
-					 * try matching the token before
-					 * proceeding.  But for input(),
-					 * there's no matching to consider.
-					 * So convert the EOB_ACT_LAST_MATCH
-					 * to EOB_ACT_END_OF_FILE.
-					 */
-
-					/* Reset buffer status. */
-					H5LTyyrestart(H5LTyyin );
-
-					/*FALLTHROUGH*/
-
-				case EOB_ACT_END_OF_FILE:
-					{
-					if ( H5LTyywrap( ) )
-						return EOF;
-
-					if ( ! (yy_did_buffer_switch_on_eof) )
-						YY_NEW_FILE;
-#ifdef __cplusplus
-					return yyinput();
-#else
-					return input();
-#endif
-					}
-
-				case EOB_ACT_CONTINUE_SCAN:
-					(yy_c_buf_p) = (yytext_ptr) + offset;
-					break;
-				}
-			}
-		}
-
-	c = *(unsigned char *) (yy_c_buf_p);	/* cast for 8-bit char's */
-	*(yy_c_buf_p) = '\0';	/* preserve H5LTyytext */
-	(yy_hold_char) = *++(yy_c_buf_p);
-
-	return c;
-}
-#endif	/* ifndef YY_NO_INPUT */
-
-/** Immediately switch to a different input stream.
- * @param input_file A readable stream.
- * 
- * @note This function does not reset the start condition to @c INITIAL .
- */
-    void H5LTyyrestart  (FILE * input_file )
-{
-    
-	if ( ! YY_CURRENT_BUFFER ){
-        H5LTyyensure_buffer_stack ();
-		YY_CURRENT_BUFFER_LVALUE =
-            H5LTyy_create_buffer(H5LTyyin,YY_BUF_SIZE );
-	}
-
-	H5LTyy_init_buffer(YY_CURRENT_BUFFER,input_file );
-	H5LTyy_load_buffer_state( );
-}
-
-/** Switch to a different input buffer.
- * @param new_buffer The new input buffer.
- * 
- */
-    void H5LTyy_switch_to_buffer  (YY_BUFFER_STATE  new_buffer )
-{
-    
-	/* TODO. We should be able to replace this entire function body
-	 * with
-	 *		H5LTyypop_buffer_state();
-	 *		H5LTyypush_buffer_state(new_buffer);
-     */
-	H5LTyyensure_buffer_stack ();
-	if ( YY_CURRENT_BUFFER == new_buffer )
-		return;
-
-	if ( YY_CURRENT_BUFFER )
-		{
-		/* Flush out information for old buffer. */
-		*(yy_c_buf_p) = (yy_hold_char);
-		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
-		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
-		}
-
-	YY_CURRENT_BUFFER_LVALUE = new_buffer;
-	H5LTyy_load_buffer_state( );
-
-	/* We don't actually know whether we did this switch during
-	 * EOF (H5LTyywrap()) processing, but the only time this flag
-	 * is looked at is after H5LTyywrap() is called, so it's safe
-	 * to go ahead and always set it.
-	 */
-	(yy_did_buffer_switch_on_eof) = 1;
-}
-
-static void H5LTyy_load_buffer_state  (void)
-{
-    	(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
-	(yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
-	H5LTyyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
-	(yy_hold_char) = *(yy_c_buf_p);
-}
-
-/** Allocate and initialize an input buffer state.
- * @param file A readable stream.
- * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- * 
- * @return the allocated buffer state.
- */
-    YY_BUFFER_STATE H5LTyy_create_buffer  (FILE * file, int  size )
-{
-	YY_BUFFER_STATE b;
-    
-	b = (YY_BUFFER_STATE) H5LTyyalloc(sizeof( struct yy_buffer_state )  );
-	if ( ! b )
-		YY_FATAL_ERROR( "out of dynamic memory in H5LTyy_create_buffer()" );
-
-	b->yy_buf_size = size;
-
-	/* yy_ch_buf has to be 2 characters longer than the size given because
-	 * we need to put in 2 end-of-buffer characters.
-	 */
-	b->yy_ch_buf = (char *) H5LTyyalloc(b->yy_buf_size + 2  );
-	if ( ! b->yy_ch_buf )
-		YY_FATAL_ERROR( "out of dynamic memory in H5LTyy_create_buffer()" );
-
-	b->yy_is_our_buffer = 1;
-
-	H5LTyy_init_buffer(b,file );
-
-	return b;
-}
-
-/** Destroy the buffer.
- * @param b a buffer created with H5LTyy_create_buffer()
- * 
- */
-    void H5LTyy_delete_buffer (YY_BUFFER_STATE  b )
-{
-    
-	if ( ! b )
-		return;
-
-	if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
-		YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
-
-	if ( b->yy_is_our_buffer )
-		H5LTyyfree((void *) b->yy_ch_buf  );
-
-	H5LTyyfree((void *) b  );
-}
-
-/* Initializes or reinitializes a buffer.
- * This function is sometimes called more than once on the same buffer,
- * such as during a H5LTyyrestart() or at EOF.
- */
-    static void H5LTyy_init_buffer  (YY_BUFFER_STATE  b, FILE * file )
-
-{
-	int oerrno = errno;
-    
-	H5LTyy_flush_buffer(b );
-
-	b->yy_input_file = file;
-	b->yy_fill_buffer = 1;
-
-    /* If b is the current buffer, then H5LTyy_init_buffer was _probably_
-     * called from H5LTyyrestart() or through yy_get_next_buffer.
-     * In that case, we don't want to reset the lineno or column.
-     */
-    if (b != YY_CURRENT_BUFFER){
-        b->yy_bs_lineno = 1;
-        b->yy_bs_column = 0;
-    }
-
-        b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-    
-	errno = oerrno;
-}
-
-/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
- * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- * 
- */
-    void H5LTyy_flush_buffer (YY_BUFFER_STATE  b )
-{
-    	if ( ! b )
-		return;
-
-	b->yy_n_chars = 0;
-
-	/* We always need two end-of-buffer characters.  The first causes
-	 * a transition to the end-of-buffer state.  The second causes
-	 * a jam in that state.
-	 */
-	b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
-	b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
-	b->yy_buf_pos = &b->yy_ch_buf[0];
-
-	b->yy_at_bol = 1;
-	b->yy_buffer_status = YY_BUFFER_NEW;
-
-	if ( b == YY_CURRENT_BUFFER )
-		H5LTyy_load_buffer_state( );
-}
-
-/** Pushes the new state onto the stack. The new state becomes
- *  the current state. This function will allocate the stack
- *  if necessary.
- *  @param new_buffer The new state.
- *  
- */
-void H5LTyypush_buffer_state (YY_BUFFER_STATE new_buffer )
-{
-    	if (new_buffer == NULL)
-		return;
-
-	H5LTyyensure_buffer_stack();
-
-	/* This block is copied from H5LTyy_switch_to_buffer. */
-	if ( YY_CURRENT_BUFFER )
-		{
-		/* Flush out information for old buffer. */
-		*(yy_c_buf_p) = (yy_hold_char);
-		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
-		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
-		}
-
-	/* Only push if top exists. Otherwise, replace top. */
-	if (YY_CURRENT_BUFFER)
-		(yy_buffer_stack_top)++;
-	YY_CURRENT_BUFFER_LVALUE = new_buffer;
-
-	/* copied from H5LTyy_switch_to_buffer. */
-	H5LTyy_load_buffer_state( );
-	(yy_did_buffer_switch_on_eof) = 1;
-}
-
-/** Removes and deletes the top of the stack, if present.
- *  The next element becomes the new top.
- *  
- */
-void H5LTyypop_buffer_state (void)
-{
-    	if (!YY_CURRENT_BUFFER)
-		return;
-
-	H5LTyy_delete_buffer(YY_CURRENT_BUFFER );
-	YY_CURRENT_BUFFER_LVALUE = NULL;
-	if ((yy_buffer_stack_top) > 0)
-		--(yy_buffer_stack_top);
-
-	if (YY_CURRENT_BUFFER) {
-		H5LTyy_load_buffer_state( );
-		(yy_did_buffer_switch_on_eof) = 1;
-	}
-}
-
-/* Allocates the stack if it does not exist.
- *  Guarantees space for at least one push.
- */
-static void H5LTyyensure_buffer_stack (void)
-{
-	yy_size_t num_to_alloc;
-    
-	if (!(yy_buffer_stack)) {
-
-		/* First allocation is just for 2 elements, since we don't know if this
-		 * scanner will even need a stack. We use 2 instead of 1 to avoid an
-		 * immediate realloc on the next call.
-         */
-		num_to_alloc = 1;
-		(yy_buffer_stack) = (struct yy_buffer_state**)H5LTyyalloc
-								(num_to_alloc * sizeof(struct yy_buffer_state*)
-								);
-		if ( ! (yy_buffer_stack) )
-			YY_FATAL_ERROR( "out of dynamic memory in H5LTyyensure_buffer_stack()" );
-								  
-		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-				
-		(yy_buffer_stack_max) = num_to_alloc;
-		(yy_buffer_stack_top) = 0;
-		return;
-	}
-
-	if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-
-		/* Increase the buffer to prepare for a possible push. */
-		int grow_size = 8 /* arbitrary grow size */;
-
-		num_to_alloc = (yy_buffer_stack_max) + grow_size;
-		(yy_buffer_stack) = (struct yy_buffer_state**)H5LTyyrealloc
-								((yy_buffer_stack),
-								num_to_alloc * sizeof(struct yy_buffer_state*)
-								);
-		if ( ! (yy_buffer_stack) )
-			YY_FATAL_ERROR( "out of dynamic memory in H5LTyyensure_buffer_stack()" );
-
-		/* zero only the new slots.*/
-		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
-		(yy_buffer_stack_max) = num_to_alloc;
-	}
-}
-
-/** Setup the input buffer state to scan directly from a user-specified character buffer.
- * @param base the character buffer
- * @param size the size in bytes of the character buffer
- * 
- * @return the newly allocated buffer state object. 
- */
-YY_BUFFER_STATE H5LTyy_scan_buffer  (char * base, yy_size_t  size )
-{
-	YY_BUFFER_STATE b;
-    
-	if ( size < 2 ||
-	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
-	     base[size-1] != YY_END_OF_BUFFER_CHAR )
-		/* They forgot to leave room for the EOB's. */
-		return 0;
-
-	b = (YY_BUFFER_STATE) H5LTyyalloc(sizeof( struct yy_buffer_state )  );
-	if ( ! b )
-		YY_FATAL_ERROR( "out of dynamic memory in H5LTyy_scan_buffer()" );
-
-	b->yy_buf_size = size - 2;	/* "- 2" to take care of EOB's */
-	b->yy_buf_pos = b->yy_ch_buf = base;
-	b->yy_is_our_buffer = 0;
-	b->yy_input_file = 0;
-	b->yy_n_chars = b->yy_buf_size;
-	b->yy_is_interactive = 0;
-	b->yy_at_bol = 1;
-	b->yy_fill_buffer = 0;
-	b->yy_buffer_status = YY_BUFFER_NEW;
-
-	H5LTyy_switch_to_buffer(b  );
-
-	return b;
-}
-
-/** Setup the input buffer state to scan a string. The next call to H5LTyylex() will
- * scan from a @e copy of @a str.
- * @param yystr a NUL-terminated string to scan
- * 
- * @return the newly allocated buffer state object.
- * @note If you want to scan bytes that may contain NUL values, then use
- *       H5LTyy_scan_bytes() instead.
- */
-YY_BUFFER_STATE H5LTyy_scan_string (yyconst char * yystr )
-{
-    
-	return H5LTyy_scan_bytes(yystr,strlen(yystr) );
-}
-
-/** Setup the input buffer state to scan the given bytes. The next call to H5LTyylex() will
- * scan from a @e copy of @a bytes.
- * @param yybytes the byte buffer to scan
- * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
- * 
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE H5LTyy_scan_bytes  (yyconst char * yybytes, yy_size_t  _yybytes_len )
-{
-	YY_BUFFER_STATE b;
-	char *buf;
-	yy_size_t n;
-	int i;
-    
-	/* Get memory for full buffer, including space for trailing EOB's. */
-	n = _yybytes_len + 2;
-	buf = (char *) H5LTyyalloc(n  );
-	if ( ! buf )
-		YY_FATAL_ERROR( "out of dynamic memory in H5LTyy_scan_bytes()" );
-
-	for ( i = 0; i < _yybytes_len; ++i )
-		buf[i] = yybytes[i];
-
-	buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
-
-	b = H5LTyy_scan_buffer(buf,n );
-	if ( ! b )
-		YY_FATAL_ERROR( "bad buffer in H5LTyy_scan_bytes()" );
-
-	/* It's okay to grow etc. this buffer, and we should throw it
-	 * away when we're done.
-	 */
-	b->yy_is_our_buffer = 1;
-
-	return b;
-}
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-static void yy_fatal_error (yyconst char* msg )
-{
-    	(void) fprintf( stderr, "%s\n", msg );
-	exit( YY_EXIT_FAILURE );
-}
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
-	do \
-		{ \
-		/* Undo effects of setting up H5LTyytext. */ \
-        int yyless_macro_arg = (n); \
-        YY_LESS_LINENO(yyless_macro_arg);\
-		H5LTyytext[H5LTyyleng] = (yy_hold_char); \
-		(yy_c_buf_p) = H5LTyytext + yyless_macro_arg; \
-		(yy_hold_char) = *(yy_c_buf_p); \
-		*(yy_c_buf_p) = '\0'; \
-		H5LTyyleng = yyless_macro_arg; \
-		} \
-	while ( 0 )
-
-/* Accessor  methods (get/set functions) to struct members. */
-
-/** Get the current line number.
- * 
- */
-int H5LTyyget_lineno  (void)
-{
-        
-    return H5LTyylineno;
-}
-
-/** Get the input stream.
- * 
- */
-FILE *H5LTyyget_in  (void)
-{
-        return H5LTyyin;
-}
-
-/** Get the output stream.
- * 
- */
-FILE *H5LTyyget_out  (void)
-{
-        return H5LTyyout;
-}
-
-/** Get the length of the current token.
- * 
- */
-yy_size_t H5LTyyget_leng  (void)
-{
-        return H5LTyyleng;
-}
-
-/** Get the current token.
- * 
- */
-
-char *H5LTyyget_text  (void)
-{
-        return H5LTyytext;
-}
-
-/** Set the current line number.
- * @param line_number
- * 
- */
-void H5LTyyset_lineno (int  line_number )
-{
-    
-    H5LTyylineno = line_number;
-}
-
-/** Set the input stream. This does not discard the current
- * input buffer.
- * @param in_str A readable stream.
- * 
- * @see H5LTyy_switch_to_buffer
- */
-void H5LTyyset_in (FILE *  in_str )
-{
-        H5LTyyin = in_str ;
-}
-
-void H5LTyyset_out (FILE *  out_str )
-{
-        H5LTyyout = out_str ;
-}
-
-int H5LTyyget_debug  (void)
-{
-        return H5LTyy_flex_debug;
-}
-
-void H5LTyyset_debug (int  bdebug )
-{
-        H5LTyy_flex_debug = bdebug ;
-}
-
-static int yy_init_globals (void)
-{
-        /* Initialization is the same as for the non-reentrant scanner.
-     * This function is called from H5LTyylex_destroy(), so don't allocate here.
-     */
-
-    (yy_buffer_stack) = 0;
-    (yy_buffer_stack_top) = 0;
-    (yy_buffer_stack_max) = 0;
-    (yy_c_buf_p) = (char *) 0;
-    (yy_init) = 0;
-    (yy_start) = 0;
-
-    (yy_state_buf) = 0;
-    (yy_state_ptr) = 0;
-    (yy_full_match) = 0;
-    (yy_lp) = 0;
-
-/* Defined in main.c */
-#ifdef YY_STDINIT
-    H5LTyyin = stdin;
-    H5LTyyout = stdout;
-#else
-    H5LTyyin = (FILE *) 0;
-    H5LTyyout = (FILE *) 0;
-#endif
-
-    /* For future reference: Set errno on error, since we are called by
-     * H5LTyylex_init()
-     */
-    return 0;
-}
-
-/* H5LTyylex_destroy is for both reentrant and non-reentrant scanners. */
-int H5LTyylex_destroy  (void)
-{
-    
-    /* Pop the buffer stack, destroying each element. */
-	while(YY_CURRENT_BUFFER){
-		H5LTyy_delete_buffer(YY_CURRENT_BUFFER  );
-		YY_CURRENT_BUFFER_LVALUE = NULL;
-		H5LTyypop_buffer_state();
-	}
-
-	/* Destroy the stack itself. */
-	H5LTyyfree((yy_buffer_stack) );
-	(yy_buffer_stack) = NULL;
-
-    H5LTyyfree ( (yy_state_buf) );
-    (yy_state_buf)  = NULL;
-
-    /* Reset the globals. This is important in a non-reentrant scanner so the next time
-     * H5LTyylex() is called, initialization will occur. */
-    yy_init_globals( );
-
-    return 0;
-}
-
-/*
- * Internal utility routines.
- */
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
-{
-	register int i;
-	for ( i = 0; i < n; ++i )
-		s1[i] = s2[i];
-}
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * s )
-{
-	register int n;
-	for ( n = 0; s[n]; ++n )
-		;
-
-	return n;
-}
-#endif
-
-void *H5LTyyalloc (yy_size_t  size )
-{
-	return (void *) malloc( size );
-}
-
-void *H5LTyyrealloc  (void * ptr, yy_size_t  size )
-{
-	/* The cast to (char *) in the following accommodates both
-	 * implementations that use char* generic pointers, and those
-	 * that use void* generic pointers.  It works with the latter
-	 * because both ANSI C and C++ allow castless assignment from
-	 * any pointer type to void*, and deal with argument conversions
-	 * as though doing an assignment.
-	 */
-	return (void *) realloc( (char *) ptr, size );
-}
-
-void H5LTyyfree (void * ptr )
-{
-	free( (char *) ptr );	/* see H5LTyyrealloc() for (char *) cast */
-}
-
-#define YYTABLES_NAME "yytables"
-
-#line 175 "H5LTanalyze.l"
-
-
-int my_yyinput(char *buf, int max_size)
-{
-   int ret;
-    
-   memcpy(buf, myinput, input_len); 
-   ret = (int)input_len;
-   return ret;
-}
-
-int H5LTyyerror(const char *msg)
-{
-   printf("ERROR: %s before \"%s\".\n", msg, H5LTyytext);
-   return 0;
-}
-
-int H5LTyywrap()
-{
-    return(1);
-}
-
diff --git a/hl/src/H5LTparse.c b/hl/src/H5LTparse.c
deleted file mode 100644
index 6ca95c54..0000000
--- a/hl/src/H5LTparse.c
+++ /dev/null
@@ -1,2439 +0,0 @@
-#if __GNUC__ >= 4 && __GNUC_MINOR__ >=2                           
-#pragma GCC diagnostic ignored "-Wconversion"                     
-#pragma GCC diagnostic ignored "-Wimplicit-function-declaration"  
-#pragma GCC diagnostic ignored "-Wlarger-than="                   
-#pragma GCC diagnostic ignored "-Wmissing-prototypes"             
-#pragma GCC diagnostic ignored "-Wnested-externs"                 
-#pragma GCC diagnostic ignored "-Wold-style-definition"           
-#pragma GCC diagnostic ignored "-Wsign-compare"                   
-#pragma GCC diagnostic ignored "-Wsign-conversion"                
-#pragma GCC diagnostic ignored "-Wstrict-prototypes"              
-#pragma GCC diagnostic ignored "-Wswitch-default"                 
-#pragma GCC diagnostic ignored "-Wunused-function"                
-#pragma GCC diagnostic ignored "-Wunused-macros"                  
-#pragma GCC diagnostic ignored "-Wunused-parameter"               
-#elif defined __SUNPRO_CC                                         
-#pragma disable_warn                                              
-#elif defined _MSC_VER                                            
-#pragma warning(push, 1)                                          
-#endif                                                            
-/* A Bison parser, made by GNU Bison 2.7.  */
-
-/* Bison implementation for Yacc-like parsers in C
-   
-      Copyright (C) 1984, 1989-1990, 2000-2012 Free Software Foundation, Inc.
-   
-   This program is free software: you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation, either version 3 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-/* As a special exception, you may create a larger work that contains
-   part or all of the Bison parser skeleton and distribute that work
-   under terms of your choice, so long as that work isn't itself a
-   parser generator using the skeleton or a modified version thereof
-   as a parser skeleton.  Alternatively, if you modify or redistribute
-   the parser skeleton itself, you may (at your option) remove this
-   special exception, which will cause the skeleton and the resulting
-   Bison output files to be licensed under the GNU General Public
-   License without this special exception.
-   
-   This special exception was added by the Free Software Foundation in
-   version 2.2 of Bison.  */
-
-/* C LALR(1) parser skeleton written by Richard Stallman, by
-   simplifying the original so-called "semantic" parser.  */
-
-/* All symbols defined below should begin with yy or YY, to avoid
-   infringing on user name space.  This should be done even for local
-   variables, as they might otherwise be expanded by user macros.
-   There are some unavoidable exceptions within include files to
-   define necessary library symbols; they are noted "INFRINGES ON
-   USER NAME SPACE" below.  */
-
-/* Identify Bison output.  */
-#define YYBISON 1
-
-/* Bison version.  */
-#define YYBISON_VERSION "2.7"
-
-/* Skeleton name.  */
-#define YYSKELETON_NAME "yacc.c"
-
-/* Pure parsers.  */
-#define YYPURE 0
-
-/* Push parsers.  */
-#define YYPUSH 0
-
-/* Pull parsers.  */
-#define YYPULL 1
-
-
-/* Substitute the variable and function names.  */
-#define yyparse         H5LTyyparse
-#define yylex           H5LTyylex
-#define yyerror         H5LTyyerror
-#define yylval          H5LTyylval
-#define yychar          H5LTyychar
-#define yydebug         H5LTyydebug
-#define yynerrs         H5LTyynerrs
-
-/* Copy the first part of user declarations.  */
-/* Line 371 of yacc.c  */
-#line 16 "H5LTparse.y"
-
-#include <stdio.h>
-#include <string.h>
-#include <hdf5.h>
-
-extern int yylex();
-extern int yyerror(const char *);
-
-#define STACK_SIZE      16
-
-/*structure for compound type information*/
-struct cmpd_info {
-    hid_t       id;             /*type ID*/
-    hbool_t     is_field;       /*flag to lexer for compound member*/
-    hbool_t     first_memb;     /*flag for first compound member*/
-};
-
-/*stack for nested compound type*/
-struct cmpd_info cmpd_stack[STACK_SIZE] = {
-    {0, 0, 1}, {0, 0, 1}, {0, 0, 1}, {0, 0, 1},
-    {0, 0, 1}, {0, 0, 1}, {0, 0, 1}, {0, 0, 1},
-    {0, 0, 1}, {0, 0, 1}, {0, 0, 1}, {0, 0, 1},
-    {0, 0, 1}, {0, 0, 1}, {0, 0, 1}, {0, 0, 1} };
-
-int csindex = -1;                /*pointer to the top of compound stack*/
-
-/*structure for array type information*/
-struct arr_info {
-    hsize_t             dims[H5S_MAX_RANK];     /*size of each dimension, limited to 32 dimensions*/
-    unsigned            ndims;                  /*number of dimensions*/
-    hbool_t             is_dim;                 /*flag to lexer for dimension*/
-};
-/*stack for nested array type*/
-struct arr_info arr_stack[STACK_SIZE];
-int asindex = -1;               /*pointer to the top of array stack*/ 
-
-hbool_t     is_str_size = 0;        /*flag to lexer for string size*/
-hbool_t     is_str_pad = 0;         /*flag to lexer for string padding*/
-H5T_str_t   str_pad;                /*variable for string padding*/
-H5T_cset_t  str_cset;               /*variable for string character set*/
-hbool_t     is_variable = 0;        /*variable for variable-length string*/
-size_t      str_size;               /*variable for string size*/
-   
-hid_t       enum_id;                /*type ID*/
-hbool_t     is_enum = 0;            /*flag to lexer for enum type*/
-hbool_t     is_enum_memb = 0;       /*flag to lexer for enum member*/
-char*       enum_memb_symbol;       /*enum member symbol string*/
-
-hbool_t is_opq_size = 0;            /*flag to lexer for opaque type size*/
-hbool_t is_opq_tag = 0;             /*flag to lexer for opaque type tag*/
-
-
-/* Line 371 of yacc.c  */
-#line 128 "H5LTparse.c"
-
-# ifndef YY_NULL
-#  if defined __cplusplus && 201103L <= __cplusplus
-#   define YY_NULL nullptr
-#  else
-#   define YY_NULL 0
-#  endif
-# endif
-
-/* Enabling verbose error messages.  */
-#ifdef YYERROR_VERBOSE
-# undef YYERROR_VERBOSE
-# define YYERROR_VERBOSE 1
-#else
-# define YYERROR_VERBOSE 0
-#endif
-
-/* In a future release of Bison, this section will be replaced
-   by #include "H5LTparse.h".  */
-#ifndef YY_H5LTYY_H5LTPARSE_H_INCLUDED
-# define YY_H5LTYY_H5LTPARSE_H_INCLUDED
-/* Enabling traces.  */
-#ifndef YYDEBUG
-# define YYDEBUG 0
-#endif
-#if YYDEBUG
-extern int H5LTyydebug;
-#endif
-
-/* Tokens.  */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
-   /* Put the tokens into the symbol table, so that GDB and other debuggers
-      know about them.  */
-   enum yytokentype {
-     H5T_STD_I8BE_TOKEN = 258,
-     H5T_STD_I8LE_TOKEN = 259,
-     H5T_STD_I16BE_TOKEN = 260,
-     H5T_STD_I16LE_TOKEN = 261,
-     H5T_STD_I32BE_TOKEN = 262,
-     H5T_STD_I32LE_TOKEN = 263,
-     H5T_STD_I64BE_TOKEN = 264,
-     H5T_STD_I64LE_TOKEN = 265,
-     H5T_STD_U8BE_TOKEN = 266,
-     H5T_STD_U8LE_TOKEN = 267,
-     H5T_STD_U16BE_TOKEN = 268,
-     H5T_STD_U16LE_TOKEN = 269,
-     H5T_STD_U32BE_TOKEN = 270,
-     H5T_STD_U32LE_TOKEN = 271,
-     H5T_STD_U64BE_TOKEN = 272,
-     H5T_STD_U64LE_TOKEN = 273,
-     H5T_NATIVE_CHAR_TOKEN = 274,
-     H5T_NATIVE_SCHAR_TOKEN = 275,
-     H5T_NATIVE_UCHAR_TOKEN = 276,
-     H5T_NATIVE_SHORT_TOKEN = 277,
-     H5T_NATIVE_USHORT_TOKEN = 278,
-     H5T_NATIVE_INT_TOKEN = 279,
-     H5T_NATIVE_UINT_TOKEN = 280,
-     H5T_NATIVE_LONG_TOKEN = 281,
-     H5T_NATIVE_ULONG_TOKEN = 282,
-     H5T_NATIVE_LLONG_TOKEN = 283,
-     H5T_NATIVE_ULLONG_TOKEN = 284,
-     H5T_IEEE_F32BE_TOKEN = 285,
-     H5T_IEEE_F32LE_TOKEN = 286,
-     H5T_IEEE_F64BE_TOKEN = 287,
-     H5T_IEEE_F64LE_TOKEN = 288,
-     H5T_NATIVE_FLOAT_TOKEN = 289,
-     H5T_NATIVE_DOUBLE_TOKEN = 290,
-     H5T_NATIVE_LDOUBLE_TOKEN = 291,
-     H5T_STRING_TOKEN = 292,
-     STRSIZE_TOKEN = 293,
-     STRPAD_TOKEN = 294,
-     CSET_TOKEN = 295,
-     CTYPE_TOKEN = 296,
-     H5T_VARIABLE_TOKEN = 297,
-     H5T_STR_NULLTERM_TOKEN = 298,
-     H5T_STR_NULLPAD_TOKEN = 299,
-     H5T_STR_SPACEPAD_TOKEN = 300,
-     H5T_CSET_ASCII_TOKEN = 301,
-     H5T_CSET_UTF8_TOKEN = 302,
-     H5T_C_S1_TOKEN = 303,
-     H5T_FORTRAN_S1_TOKEN = 304,
-     H5T_OPAQUE_TOKEN = 305,
-     OPQ_SIZE_TOKEN = 306,
-     OPQ_TAG_TOKEN = 307,
-     H5T_COMPOUND_TOKEN = 308,
-     H5T_ENUM_TOKEN = 309,
-     H5T_ARRAY_TOKEN = 310,
-     H5T_VLEN_TOKEN = 311,
-     STRING = 312,
-     NUMBER = 313
-   };
-#endif
-
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-{
-/* Line 387 of yacc.c  */
-#line 68 "H5LTparse.y"
-
-    int     ival;         /*for integer token*/
-    char    *sval;        /*for name string*/
-    hid_t   hid;          /*for hid_t token*/
-
-
-/* Line 387 of yacc.c  */
-#line 236 "H5LTparse.c"
-} YYSTYPE;
-# define YYSTYPE_IS_TRIVIAL 1
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-#endif
-
-extern YYSTYPE H5LTyylval;
-
-#ifdef YYPARSE_PARAM
-#if defined __STDC__ || defined __cplusplus
-hid_t H5LTyyparse (void *YYPARSE_PARAM);
-#else
-hid_t H5LTyyparse ();
-#endif
-#else /* ! YYPARSE_PARAM */
-#if defined __STDC__ || defined __cplusplus
-hid_t H5LTyyparse (void);
-#else
-hid_t H5LTyyparse ();
-#endif
-#endif /* ! YYPARSE_PARAM */
-
-#endif /* !YY_H5LTYY_H5LTPARSE_H_INCLUDED  */
-
-/* Copy the second part of user declarations.  */
-
-/* Line 390 of yacc.c  */
-#line 264 "H5LTparse.c"
-
-#ifdef short
-# undef short
-#endif
-
-#ifdef YYTYPE_UINT8
-typedef YYTYPE_UINT8 yytype_uint8;
-#else
-typedef unsigned char yytype_uint8;
-#endif
-
-#ifdef YYTYPE_INT8
-typedef YYTYPE_INT8 yytype_int8;
-#elif (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-typedef signed char yytype_int8;
-#else
-typedef short int yytype_int8;
-#endif
-
-#ifdef YYTYPE_UINT16
-typedef YYTYPE_UINT16 yytype_uint16;
-#else
-typedef unsigned short int yytype_uint16;
-#endif
-
-#ifdef YYTYPE_INT16
-typedef YYTYPE_INT16 yytype_int16;
-#else
-typedef short int yytype_int16;
-#endif
-
-#ifndef YYSIZE_T
-# ifdef __SIZE_TYPE__
-#  define YYSIZE_T __SIZE_TYPE__
-# elif defined size_t
-#  define YYSIZE_T size_t
-# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-#  include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-#  define YYSIZE_T size_t
-# else
-#  define YYSIZE_T unsigned int
-# endif
-#endif
-
-#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
-
-#ifndef YY_
-# if defined YYENABLE_NLS && YYENABLE_NLS
-#  if ENABLE_NLS
-#   include <libintl.h> /* INFRINGES ON USER NAME SPACE */
-#   define YY_(Msgid) dgettext ("bison-runtime", Msgid)
-#  endif
-# endif
-# ifndef YY_
-#  define YY_(Msgid) Msgid
-# endif
-#endif
-
-/* Suppress unused-variable warnings by "using" E.  */
-#if ! defined lint || defined __GNUC__
-# define YYUSE(E) ((void) (E))
-#else
-# define YYUSE(E) /* empty */
-#endif
-
-/* Identity function, used to suppress warnings about constant conditions.  */
-#ifndef lint
-# define YYID(N) (N)
-#else
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-static int
-YYID (int yyi)
-#else
-static int
-YYID (yyi)
-    int yyi;
-#endif
-{
-  return yyi;
-}
-#endif
-
-#if ! defined yyoverflow || YYERROR_VERBOSE
-
-/* The parser invokes alloca or malloc; define the necessary symbols.  */
-
-# ifdef YYSTACK_USE_ALLOCA
-#  if YYSTACK_USE_ALLOCA
-#   ifdef __GNUC__
-#    define YYSTACK_ALLOC __builtin_alloca
-#   elif defined __BUILTIN_VA_ARG_INCR
-#    include <alloca.h> /* INFRINGES ON USER NAME SPACE */
-#   elif defined _AIX
-#    define YYSTACK_ALLOC __alloca
-#   elif defined _MSC_VER
-#    include <malloc.h> /* INFRINGES ON USER NAME SPACE */
-#    define alloca _alloca
-#   else
-#    define YYSTACK_ALLOC alloca
-#    if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-#     include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-      /* Use EXIT_SUCCESS as a witness for stdlib.h.  */
-#     ifndef EXIT_SUCCESS
-#      define EXIT_SUCCESS 0
-#     endif
-#    endif
-#   endif
-#  endif
-# endif
-
-# ifdef YYSTACK_ALLOC
-   /* Pacify GCC's `empty if-body' warning.  */
-#  define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
-#  ifndef YYSTACK_ALLOC_MAXIMUM
-    /* The OS might guarantee only one guard page at the bottom of the stack,
-       and a page size can be as small as 4096 bytes.  So we cannot safely
-       invoke alloca (N) if N exceeds 4096.  Use a slightly smaller number
-       to allow for a few compiler-allocated temporary stack slots.  */
-#   define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
-#  endif
-# else
-#  define YYSTACK_ALLOC YYMALLOC
-#  define YYSTACK_FREE YYFREE
-#  ifndef YYSTACK_ALLOC_MAXIMUM
-#   define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
-#  endif
-#  if (defined __cplusplus && ! defined EXIT_SUCCESS \
-       && ! ((defined YYMALLOC || defined malloc) \
-	     && (defined YYFREE || defined free)))
-#   include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-#   ifndef EXIT_SUCCESS
-#    define EXIT_SUCCESS 0
-#   endif
-#  endif
-#  ifndef YYMALLOC
-#   define YYMALLOC malloc
-#   if ! defined malloc && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
-#   endif
-#  endif
-#  ifndef YYFREE
-#   define YYFREE free
-#   if ! defined free && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-void free (void *); /* INFRINGES ON USER NAME SPACE */
-#   endif
-#  endif
-# endif
-#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
-
-
-#if (! defined yyoverflow \
-     && (! defined __cplusplus \
-	 || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
-
-/* A type that is properly aligned for any stack member.  */
-union yyalloc
-{
-  yytype_int16 yyss_alloc;
-  YYSTYPE yyvs_alloc;
-};
-
-/* The size of the maximum gap between one aligned stack and the next.  */
-# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
-
-/* The size of an array large to enough to hold all stacks, each with
-   N elements.  */
-# define YYSTACK_BYTES(N) \
-     ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \
-      + YYSTACK_GAP_MAXIMUM)
-
-# define YYCOPY_NEEDED 1
-
-/* Relocate STACK from its old location to the new one.  The
-   local variables YYSIZE and YYSTACKSIZE give the old and new number of
-   elements in the stack, and YYPTR gives the new location of the
-   stack.  Advance YYPTR to a properly aligned location for the next
-   stack.  */
-# define YYSTACK_RELOCATE(Stack_alloc, Stack)				\
-    do									\
-      {									\
-	YYSIZE_T yynewbytes;						\
-	YYCOPY (&yyptr->Stack_alloc, Stack, yysize);			\
-	Stack = &yyptr->Stack_alloc;					\
-	yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
-	yyptr += yynewbytes / sizeof (*yyptr);				\
-      }									\
-    while (YYID (0))
-
-#endif
-
-#if defined YYCOPY_NEEDED && YYCOPY_NEEDED
-/* Copy COUNT objects from SRC to DST.  The source and destination do
-   not overlap.  */
-# ifndef YYCOPY
-#  if defined __GNUC__ && 1 < __GNUC__
-#   define YYCOPY(Dst, Src, Count) \
-      __builtin_memcpy (Dst, Src, (Count) * sizeof (*(Src)))
-#  else
-#   define YYCOPY(Dst, Src, Count)              \
-      do                                        \
-        {                                       \
-          YYSIZE_T yyi;                         \
-          for (yyi = 0; yyi < (Count); yyi++)   \
-            (Dst)[yyi] = (Src)[yyi];            \
-        }                                       \
-      while (YYID (0))
-#  endif
-# endif
-#endif /* !YYCOPY_NEEDED */
-
-/* YYFINAL -- State number of the termination state.  */
-#define YYFINAL  58
-/* YYLAST -- Last index in YYTABLE.  */
-#define YYLAST   203
-
-/* YYNTOKENS -- Number of terminals.  */
-#define YYNTOKENS  66
-/* YYNNTS -- Number of nonterminals.  */
-#define YYNNTS  46
-/* YYNRULES -- Number of rules.  */
-#define YYNRULES  95
-/* YYNRULES -- Number of states.  */
-#define YYNSTATES  143
-
-/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX.  */
-#define YYUNDEFTOK  2
-#define YYMAXUTOK   313
-
-#define YYTRANSLATE(YYX)						\
-  ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
-
-/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX.  */
-static const yytype_uint8 yytranslate[] =
-{
-       0,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,    63,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,    64,    65,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,    61,     2,    62,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,    59,     2,    60,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,     2,     2,     1,     2,     3,     4,
-       5,     6,     7,     8,     9,    10,    11,    12,    13,    14,
-      15,    16,    17,    18,    19,    20,    21,    22,    23,    24,
-      25,    26,    27,    28,    29,    30,    31,    32,    33,    34,
-      35,    36,    37,    38,    39,    40,    41,    42,    43,    44,
-      45,    46,    47,    48,    49,    50,    51,    52,    53,    54,
-      55,    56,    57,    58
-};
-
-#if YYDEBUG
-/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
-   YYRHS.  */
-static const yytype_uint8 yyprhs[] =
-{
-       0,     0,     3,     4,     6,     8,    10,    12,    14,    16,
-      18,    20,    22,    24,    26,    28,    30,    32,    34,    36,
-      38,    40,    42,    44,    46,    48,    50,    52,    54,    56,
-      58,    60,    62,    64,    66,    68,    70,    72,    74,    76,
-      78,    80,    82,    84,    86,    88,    90,    92,    93,    99,
-     100,   103,   104,   112,   114,   115,   118,   120,   121,   128,
-     129,   132,   133,   134,   140,   142,   147,   148,   149,   150,
-     151,   167,   169,   171,   172,   173,   174,   175,   176,   197,
-     199,   201,   203,   205,   207,   209,   211,   213,   215,   216,
-     224,   225,   228,   229,   236,   238
-};
-
-/* YYRHS -- A `-1'-separated list of the rules' RHS.  */
-static const yytype_int8 yyrhs[] =
-{
-      67,     0,    -1,    -1,    68,    -1,    69,    -1,    72,    -1,
-      80,    -1,    87,    -1,    70,    -1,    71,    -1,    95,    -1,
-     105,    -1,    88,    -1,     3,    -1,     4,    -1,     5,    -1,
-       6,    -1,     7,    -1,     8,    -1,     9,    -1,    10,    -1,
-      11,    -1,    12,    -1,    13,    -1,    14,    -1,    15,    -1,
-      16,    -1,    17,    -1,    18,    -1,    19,    -1,    20,    -1,
-      21,    -1,    22,    -1,    23,    -1,    24,    -1,    25,    -1,
-      26,    -1,    27,    -1,    28,    -1,    29,    -1,    30,    -1,
-      31,    -1,    32,    -1,    33,    -1,    34,    -1,    35,    -1,
-      36,    -1,    -1,    53,    73,    59,    74,    60,    -1,    -1,
-      74,    75,    -1,    -1,    68,    76,    63,    77,    63,    78,
-      65,    -1,    57,    -1,    -1,    64,    79,    -1,    58,    -1,
-      -1,    55,    81,    59,    82,    68,    60,    -1,    -1,    82,
-      83,    -1,    -1,    -1,    61,    84,    86,    85,    62,    -1,
-      58,    -1,    56,    59,    68,    60,    -1,    -1,    -1,    -1,
-      -1,    50,    59,    51,    89,    93,    65,    90,    52,    91,
-      63,    94,    63,    65,    92,    60,    -1,    58,    -1,    57,
-      -1,    -1,    -1,    -1,    -1,    -1,    37,    59,    38,    96,
-     101,    65,    97,    39,   102,    65,    98,    40,   103,    65,
-      99,    41,   104,    65,   100,    60,    -1,    42,    -1,    58,
-      -1,    43,    -1,    44,    -1,    45,    -1,    46,    -1,    47,
-      -1,    48,    -1,    49,    -1,    -1,    54,    59,    70,    65,
-     106,   107,    60,    -1,    -1,   107,   108,    -1,    -1,    63,
-     110,    63,   109,   111,    65,    -1,    57,    -1,    58,    -1
-};
-
-/* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
-static const yytype_uint16 yyrline[] =
-{
-       0,   101,   101,   102,   104,   105,   106,   107,   109,   110,
-     111,   112,   113,   116,   117,   118,   119,   120,   121,   122,
-     123,   124,   125,   126,   127,   128,   129,   130,   131,   132,
-     133,   134,   135,   136,   137,   138,   139,   140,   141,   142,
-     145,   146,   147,   148,   149,   150,   151,   155,   154,   163,
-     164,   166,   166,   200,   206,   207,   210,   212,   212,   221,
-     222,   224,   225,   224,   232,   235,   241,   242,   247,   248,
-     239,   254,   256,   260,   261,   269,   278,   285,   258,   309,
-     310,   312,   313,   314,   316,   317,   319,   320,   324,   323,
-     328,   329,   331,   331,   383,   385
-};
-#endif
-
-#if YYDEBUG || YYERROR_VERBOSE || 0
-/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
-   First, the terminals, then, starting at YYNTOKENS, nonterminals.  */
-static const char *const yytname[] =
-{
-  "$end", "error", "$undefined", "H5T_STD_I8BE_TOKEN",
-  "H5T_STD_I8LE_TOKEN", "H5T_STD_I16BE_TOKEN", "H5T_STD_I16LE_TOKEN",
-  "H5T_STD_I32BE_TOKEN", "H5T_STD_I32LE_TOKEN", "H5T_STD_I64BE_TOKEN",
-  "H5T_STD_I64LE_TOKEN", "H5T_STD_U8BE_TOKEN", "H5T_STD_U8LE_TOKEN",
-  "H5T_STD_U16BE_TOKEN", "H5T_STD_U16LE_TOKEN", "H5T_STD_U32BE_TOKEN",
-  "H5T_STD_U32LE_TOKEN", "H5T_STD_U64BE_TOKEN", "H5T_STD_U64LE_TOKEN",
-  "H5T_NATIVE_CHAR_TOKEN", "H5T_NATIVE_SCHAR_TOKEN",
-  "H5T_NATIVE_UCHAR_TOKEN", "H5T_NATIVE_SHORT_TOKEN",
-  "H5T_NATIVE_USHORT_TOKEN", "H5T_NATIVE_INT_TOKEN",
-  "H5T_NATIVE_UINT_TOKEN", "H5T_NATIVE_LONG_TOKEN",
-  "H5T_NATIVE_ULONG_TOKEN", "H5T_NATIVE_LLONG_TOKEN",
-  "H5T_NATIVE_ULLONG_TOKEN", "H5T_IEEE_F32BE_TOKEN",
-  "H5T_IEEE_F32LE_TOKEN", "H5T_IEEE_F64BE_TOKEN", "H5T_IEEE_F64LE_TOKEN",
-  "H5T_NATIVE_FLOAT_TOKEN", "H5T_NATIVE_DOUBLE_TOKEN",
-  "H5T_NATIVE_LDOUBLE_TOKEN", "H5T_STRING_TOKEN", "STRSIZE_TOKEN",
-  "STRPAD_TOKEN", "CSET_TOKEN", "CTYPE_TOKEN", "H5T_VARIABLE_TOKEN",
-  "H5T_STR_NULLTERM_TOKEN", "H5T_STR_NULLPAD_TOKEN",
-  "H5T_STR_SPACEPAD_TOKEN", "H5T_CSET_ASCII_TOKEN", "H5T_CSET_UTF8_TOKEN",
-  "H5T_C_S1_TOKEN", "H5T_FORTRAN_S1_TOKEN", "H5T_OPAQUE_TOKEN",
-  "OPQ_SIZE_TOKEN", "OPQ_TAG_TOKEN", "H5T_COMPOUND_TOKEN",
-  "H5T_ENUM_TOKEN", "H5T_ARRAY_TOKEN", "H5T_VLEN_TOKEN", "STRING",
-  "NUMBER", "'{'", "'}'", "'['", "']'", "'\"'", "':'", "';'", "$accept",
-  "start", "ddl_type", "atomic_type", "integer_type", "fp_type",
-  "compound_type", "$@1", "memb_list", "memb_def", "$@2", "field_name",
-  "field_offset", "offset", "array_type", "$@3", "dim_list", "dim", "$@4",
-  "$@5", "dimsize", "vlen_type", "opaque_type", "$@6", "@7", "$@8", "$@9",
-  "opaque_size", "opaque_tag", "string_type", "$@10", "$@11", "$@12",
-  "$@13", "@14", "strsize", "strpad", "cset", "ctype", "enum_type", "$@15",
-  "enum_list", "enum_def", "$@16", "enum_symbol", "enum_val", YY_NULL
-};
-#endif
-
-# ifdef YYPRINT
-/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
-   token YYLEX-NUM.  */
-static const yytype_uint16 yytoknum[] =
-{
-       0,   256,   257,   258,   259,   260,   261,   262,   263,   264,
-     265,   266,   267,   268,   269,   270,   271,   272,   273,   274,
-     275,   276,   277,   278,   279,   280,   281,   282,   283,   284,
-     285,   286,   287,   288,   289,   290,   291,   292,   293,   294,
-     295,   296,   297,   298,   299,   300,   301,   302,   303,   304,
-     305,   306,   307,   308,   309,   310,   311,   312,   313,   123,
-     125,    91,    93,    34,    58,    59
-};
-# endif
-
-/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives.  */
-static const yytype_uint8 yyr1[] =
-{
-       0,    66,    67,    67,    68,    68,    68,    68,    69,    69,
-      69,    69,    69,    70,    70,    70,    70,    70,    70,    70,
-      70,    70,    70,    70,    70,    70,    70,    70,    70,    70,
-      70,    70,    70,    70,    70,    70,    70,    70,    70,    70,
-      71,    71,    71,    71,    71,    71,    71,    73,    72,    74,
-      74,    76,    75,    77,    78,    78,    79,    81,    80,    82,
-      82,    84,    85,    83,    86,    87,    89,    90,    91,    92,
-      88,    93,    94,    96,    97,    98,    99,   100,    95,   101,
-     101,   102,   102,   102,   103,   103,   104,   104,   106,   105,
-     107,   107,   109,   108,   110,   111
-};
-
-/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN.  */
-static const yytype_uint8 yyr2[] =
-{
-       0,     2,     0,     1,     1,     1,     1,     1,     1,     1,
-       1,     1,     1,     1,     1,     1,     1,     1,     1,     1,
-       1,     1,     1,     1,     1,     1,     1,     1,     1,     1,
-       1,     1,     1,     1,     1,     1,     1,     1,     1,     1,
-       1,     1,     1,     1,     1,     1,     1,     0,     5,     0,
-       2,     0,     7,     1,     0,     2,     1,     0,     6,     0,
-       2,     0,     0,     5,     1,     4,     0,     0,     0,     0,
-      15,     1,     1,     0,     0,     0,     0,     0,    20,     1,
-       1,     1,     1,     1,     1,     1,     1,     1,     0,     7,
-       0,     2,     0,     6,     1,     1
-};
-
-/* YYDEFACT[STATE-NAME] -- Default reduction number in state STATE-NUM.
-   Performed when YYTABLE doesn't specify something else to do.  Zero
-   means the default is an error.  */
-static const yytype_uint8 yydefact[] =
-{
-       2,    13,    14,    15,    16,    17,    18,    19,    20,    21,
-      22,    23,    24,    25,    26,    27,    28,    29,    30,    31,
-      32,    33,    34,    35,    36,    37,    38,    39,    40,    41,
-      42,    43,    44,    45,    46,     0,     0,    47,     0,    57,
-       0,     0,     3,     4,     8,     9,     5,     6,     7,    12,
-      10,    11,     0,     0,     0,     0,     0,     0,     1,    73,
-      66,    49,     0,    59,     0,     0,     0,     0,    88,     0,
-      65,    79,    80,     0,    71,     0,    48,    51,    50,    90,
-      61,     0,    60,    74,    67,     0,     0,     0,    58,     0,
-       0,     0,    89,     0,    91,    64,    62,     0,    68,    53,
-       0,    94,     0,     0,    81,    82,    83,     0,     0,    54,
-      92,    63,    75,     0,     0,     0,     0,     0,    72,     0,
-      56,    55,    52,    95,     0,     0,     0,    93,    84,    85,
-       0,    69,    76,     0,     0,    70,     0,    86,    87,     0,
-      77,     0,    78
-};
-
-/* YYDEFGOTO[NTERM-NUM].  */
-static const yytype_int16 yydefgoto[] =
-{
-      -1,    41,    42,    43,    44,    45,    46,    54,    67,    78,
-      85,   100,   115,   121,    47,    56,    69,    82,    87,   103,
-      96,    48,    49,    66,    90,   108,   133,    75,   119,    50,
-      65,    89,   117,   134,   141,    73,   107,   130,   139,    51,
-      79,    86,    94,   116,   102,   124
-};
-
-/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
-   STATE-NUM.  */
-#define YYPACT_NINF -25
-static const yytype_int16 yypact[] =
-{
-     114,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,
-     -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,
-     -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,
-     -25,   -25,   -25,   -25,   -25,   -24,   -20,   -25,   -15,   -25,
-     -14,    49,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,
-     -25,   -25,    19,    45,    38,   168,    39,   114,   -25,   -25,
-     -25,   -25,    34,   -25,    40,    -4,    43,    56,   -25,    -3,
-     -25,   -25,   -25,    37,   -25,    42,   -25,   -25,   -25,   -25,
-     -25,    44,   -25,   -25,   -25,    50,   -23,    47,   -25,    64,
-      62,    51,   -25,    58,   -25,   -25,   -25,    -2,   -25,   -25,
-      89,   -25,    90,    92,   -25,   -25,   -25,    91,    94,    95,
-     -25,   -25,   -25,    98,   100,    96,   102,   122,   -25,   103,
-     -25,   -25,   -25,   -25,   133,     9,   134,   -25,   -25,   -25,
-     135,   -25,   -25,   105,   160,   -25,    46,   -25,   -25,   137,
-     -25,   143,   -25
-};
-
-/* YYPGOTO[NTERM-NUM].  */
-static const yytype_int8 yypgoto[] =
-{
-     -25,   -25,   -21,   -25,   108,   -25,   -25,   -25,   -25,   -25,
-     -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,
-     -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,
-     -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,   -25,
-     -25,   -25,   -25,   -25,   -25,   -25
-};
-
-/* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
-   positive, shift that token.  If negative, reduce the rule which
-   number is the opposite.  If YYTABLE_NINF, syntax error.  */
-#define YYTABLE_NINF -1
-static const yytype_uint8 yytable[] =
-{
-       1,     2,     3,     4,     5,     6,     7,     8,     9,    10,
-      11,    12,    13,    14,    15,    16,    17,    18,    19,    20,
-      21,    22,    23,    24,    25,    26,    27,    28,    29,    30,
-      31,    32,    33,    34,    35,    52,    64,    92,    71,    53,
-      93,   104,   105,   106,    55,    57,    77,    36,    81,    58,
-      37,    38,    39,    40,    72,   128,   129,    59,    80,     1,
-       2,     3,     4,     5,     6,     7,     8,     9,    10,    11,
-      12,    13,    14,    15,    16,    17,    18,    19,    20,    21,
-      22,    23,    24,    25,    26,    27,    28,    29,    30,    31,
-      32,    33,    34,    35,   137,   138,    60,    61,    63,    68,
-      70,    74,    83,    97,    88,    95,    36,    84,    99,    37,
-      38,    39,    40,    91,    98,   101,    76,     1,     2,     3,
-       4,     5,     6,     7,     8,     9,    10,    11,    12,    13,
-      14,    15,    16,    17,    18,    19,    20,    21,    22,    23,
-      24,    25,    26,    27,    28,    29,    30,    31,    32,    33,
-      34,    35,   109,   110,   111,   118,   112,   113,   120,   114,
-     123,   122,   125,    62,    36,   135,   126,    37,    38,    39,
-      40,     1,     2,     3,     4,     5,     6,     7,     8,     9,
-      10,    11,    12,    13,    14,    15,    16,    17,    18,    19,
-      20,    21,    22,    23,    24,    25,    26,    27,   127,   131,
-     132,   136,   140,   142
-};
-
-#define yypact_value_is_default(Yystate) \
-  (!!((Yystate) == (-25)))
-
-#define yytable_value_is_error(Yytable_value) \
-  YYID (0)
-
-static const yytype_uint8 yycheck[] =
-{
-       3,     4,     5,     6,     7,     8,     9,    10,    11,    12,
-      13,    14,    15,    16,    17,    18,    19,    20,    21,    22,
-      23,    24,    25,    26,    27,    28,    29,    30,    31,    32,
-      33,    34,    35,    36,    37,    59,    57,    60,    42,    59,
-      63,    43,    44,    45,    59,    59,    67,    50,    69,     0,
-      53,    54,    55,    56,    58,    46,    47,    38,    61,     3,
-       4,     5,     6,     7,     8,     9,    10,    11,    12,    13,
-      14,    15,    16,    17,    18,    19,    20,    21,    22,    23,
-      24,    25,    26,    27,    28,    29,    30,    31,    32,    33,
-      34,    35,    36,    37,    48,    49,    51,    59,    59,    65,
-      60,    58,    65,    39,    60,    58,    50,    65,    57,    53,
-      54,    55,    56,    63,    52,    57,    60,     3,     4,     5,
-       6,     7,     8,     9,    10,    11,    12,    13,    14,    15,
-      16,    17,    18,    19,    20,    21,    22,    23,    24,    25,
-      26,    27,    28,    29,    30,    31,    32,    33,    34,    35,
-      36,    37,    63,    63,    62,    57,    65,    63,    58,    64,
-      58,    65,    40,    55,    50,    60,    63,    53,    54,    55,
-      56,     3,     4,     5,     6,     7,     8,     9,    10,    11,
-      12,    13,    14,    15,    16,    17,    18,    19,    20,    21,
-      22,    23,    24,    25,    26,    27,    28,    29,    65,    65,
-      65,    41,    65,    60
-};
-
-/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
-   symbol of state STATE-NUM.  */
-static const yytype_uint8 yystos[] =
-{
-       0,     3,     4,     5,     6,     7,     8,     9,    10,    11,
-      12,    13,    14,    15,    16,    17,    18,    19,    20,    21,
-      22,    23,    24,    25,    26,    27,    28,    29,    30,    31,
-      32,    33,    34,    35,    36,    37,    50,    53,    54,    55,
-      56,    67,    68,    69,    70,    71,    72,    80,    87,    88,
-      95,   105,    59,    59,    73,    59,    81,    59,     0,    38,
-      51,    59,    70,    59,    68,    96,    89,    74,    65,    82,
-      60,    42,    58,   101,    58,    93,    60,    68,    75,   106,
-      61,    68,    83,    65,    65,    76,   107,    84,    60,    97,
-      90,    63,    60,    63,   108,    58,    86,    39,    52,    57,
-      77,    57,   110,    85,    43,    44,    45,   102,    91,    63,
-      63,    62,    65,    63,    64,    78,   109,    98,    57,    94,
-      58,    79,    65,    58,   111,    40,    63,    65,    46,    47,
-     103,    65,    65,    92,    99,    60,    41,    48,    49,   104,
-      65,   100,    60
-};
-
-#define yyerrok		(yyerrstatus = 0)
-#define yyclearin	(yychar = YYEMPTY)
-#define YYEMPTY		(-2)
-#define YYEOF		0
-
-#define YYACCEPT	goto yyacceptlab
-#define YYABORT		goto yyabortlab
-#define YYERROR		goto yyerrorlab
-
-
-/* Like YYERROR except do call yyerror.  This remains here temporarily
-   to ease the transition to the new meaning of YYERROR, for GCC.
-   Once GCC version 2 has supplanted version 1, this can go.  However,
-   YYFAIL appears to be in use.  Nevertheless, it is formally deprecated
-   in Bison 2.4.2's NEWS entry, where a plan to phase it out is
-   discussed.  */
-
-#define YYFAIL		goto yyerrlab
-#if defined YYFAIL
-  /* This is here to suppress warnings from the GCC cpp's
-     -Wunused-macros.  Normally we don't worry about that warning, but
-     some users do, and we want to make it easy for users to remove
-     YYFAIL uses, which will produce warnings from Bison 2.5.  */
-#endif
-
-#define YYRECOVERING()  (!!yyerrstatus)
-
-#define YYBACKUP(Token, Value)                                  \
-do                                                              \
-  if (yychar == YYEMPTY)                                        \
-    {                                                           \
-      yychar = (Token);                                         \
-      yylval = (Value);                                         \
-      YYPOPSTACK (yylen);                                       \
-      yystate = *yyssp;                                         \
-      goto yybackup;                                            \
-    }                                                           \
-  else                                                          \
-    {                                                           \
-      yyerror (YY_("syntax error: cannot back up")); \
-      YYERROR;							\
-    }								\
-while (YYID (0))
-
-/* Error token number */
-#define YYTERROR	1
-#define YYERRCODE	256
-
-
-/* This macro is provided for backward compatibility. */
-#ifndef YY_LOCATION_PRINT
-# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-#endif
-
-
-/* YYLEX -- calling `yylex' with the right arguments.  */
-#ifdef YYLEX_PARAM
-# define YYLEX yylex (YYLEX_PARAM)
-#else
-# define YYLEX yylex ()
-#endif
-
-/* Enable debugging if requested.  */
-#if YYDEBUG
-
-# ifndef YYFPRINTF
-#  include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-#  define YYFPRINTF fprintf
-# endif
-
-# define YYDPRINTF(Args)			\
-do {						\
-  if (yydebug)					\
-    YYFPRINTF Args;				\
-} while (YYID (0))
-
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location)			  \
-do {									  \
-  if (yydebug)								  \
-    {									  \
-      YYFPRINTF (stderr, "%s ", Title);					  \
-      yy_symbol_print (stderr,						  \
-		  Type, Value); \
-      YYFPRINTF (stderr, "\n");						  \
-    }									  \
-} while (YYID (0))
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT.  |
-`--------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
-#else
-static void
-yy_symbol_value_print (yyoutput, yytype, yyvaluep)
-    FILE *yyoutput;
-    int yytype;
-    YYSTYPE const * const yyvaluep;
-#endif
-{
-  FILE *yyo = yyoutput;
-  YYUSE (yyo);
-  if (!yyvaluep)
-    return;
-# ifdef YYPRINT
-  if (yytype < YYNTOKENS)
-    YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
-# else
-  YYUSE (yyoutput);
-# endif
-  switch (yytype)
-    {
-      default:
-        break;
-    }
-}
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT.  |
-`--------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
-#else
-static void
-yy_symbol_print (yyoutput, yytype, yyvaluep)
-    FILE *yyoutput;
-    int yytype;
-    YYSTYPE const * const yyvaluep;
-#endif
-{
-  if (yytype < YYNTOKENS)
-    YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
-  else
-    YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
-
-  yy_symbol_value_print (yyoutput, yytype, yyvaluep);
-  YYFPRINTF (yyoutput, ")");
-}
-
-/*------------------------------------------------------------------.
-| yy_stack_print -- Print the state stack from its BOTTOM up to its |
-| TOP (included).                                                   |
-`------------------------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-static void
-yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop)
-#else
-static void
-yy_stack_print (yybottom, yytop)
-    yytype_int16 *yybottom;
-    yytype_int16 *yytop;
-#endif
-{
-  YYFPRINTF (stderr, "Stack now");
-  for (; yybottom <= yytop; yybottom++)
-    {
-      int yybot = *yybottom;
-      YYFPRINTF (stderr, " %d", yybot);
-    }
-  YYFPRINTF (stderr, "\n");
-}
-
-# define YY_STACK_PRINT(Bottom, Top)				\
-do {								\
-  if (yydebug)							\
-    yy_stack_print ((Bottom), (Top));				\
-} while (YYID (0))
-
-
-/*------------------------------------------------.
-| Report that the YYRULE is going to be reduced.  |
-`------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-static void
-yy_reduce_print (YYSTYPE *yyvsp, int yyrule)
-#else
-static void
-yy_reduce_print (yyvsp, yyrule)
-    YYSTYPE *yyvsp;
-    int yyrule;
-#endif
-{
-  int yynrhs = yyr2[yyrule];
-  int yyi;
-  unsigned long int yylno = yyrline[yyrule];
-  YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
-	     yyrule - 1, yylno);
-  /* The symbols being reduced.  */
-  for (yyi = 0; yyi < yynrhs; yyi++)
-    {
-      YYFPRINTF (stderr, "   $%d = ", yyi + 1);
-      yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
-		       &(yyvsp[(yyi + 1) - (yynrhs)])
-		       		       );
-      YYFPRINTF (stderr, "\n");
-    }
-}
-
-# define YY_REDUCE_PRINT(Rule)		\
-do {					\
-  if (yydebug)				\
-    yy_reduce_print (yyvsp, Rule); \
-} while (YYID (0))
-
-/* Nonzero means print parse trace.  It is left uninitialized so that
-   multiple parsers can coexist.  */
-int yydebug;
-#else /* !YYDEBUG */
-# define YYDPRINTF(Args)
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
-# define YY_STACK_PRINT(Bottom, Top)
-# define YY_REDUCE_PRINT(Rule)
-#endif /* !YYDEBUG */
-
-
-/* YYINITDEPTH -- initial size of the parser's stacks.  */
-#ifndef	YYINITDEPTH
-# define YYINITDEPTH 200
-#endif
-
-/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
-   if the built-in stack extension method is used).
-
-   Do not make this value too large; the results are undefined if
-   YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
-   evaluated with infinite-precision integer arithmetic.  */
-
-#ifndef YYMAXDEPTH
-# define YYMAXDEPTH 10000
-#endif
-
-
-#if YYERROR_VERBOSE
-
-# ifndef yystrlen
-#  if defined __GLIBC__ && defined _STRING_H
-#   define yystrlen strlen
-#  else
-/* Return the length of YYSTR.  */
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-static YYSIZE_T
-yystrlen (const char *yystr)
-#else
-static YYSIZE_T
-yystrlen (yystr)
-    const char *yystr;
-#endif
-{
-  YYSIZE_T yylen;
-  for (yylen = 0; yystr[yylen]; yylen++)
-    continue;
-  return yylen;
-}
-#  endif
-# endif
-
-# ifndef yystpcpy
-#  if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
-#   define yystpcpy stpcpy
-#  else
-/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
-   YYDEST.  */
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-static char *
-yystpcpy (char *yydest, const char *yysrc)
-#else
-static char *
-yystpcpy (yydest, yysrc)
-    char *yydest;
-    const char *yysrc;
-#endif
-{
-  char *yyd = yydest;
-  const char *yys = yysrc;
-
-  while ((*yyd++ = *yys++) != '\0')
-    continue;
-
-  return yyd - 1;
-}
-#  endif
-# endif
-
-# ifndef yytnamerr
-/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
-   quotes and backslashes, so that it's suitable for yyerror.  The
-   heuristic is that double-quoting is unnecessary unless the string
-   contains an apostrophe, a comma, or backslash (other than
-   backslash-backslash).  YYSTR is taken from yytname.  If YYRES is
-   null, do not copy; instead, return the length of what the result
-   would have been.  */
-static YYSIZE_T
-yytnamerr (char *yyres, const char *yystr)
-{
-  if (*yystr == '"')
-    {
-      YYSIZE_T yyn = 0;
-      char const *yyp = yystr;
-
-      for (;;)
-	switch (*++yyp)
-	  {
-	  case '\'':
-	  case ',':
-	    goto do_not_strip_quotes;
-
-	  case '\\':
-	    if (*++yyp != '\\')
-	      goto do_not_strip_quotes;
-	    /* Fall through.  */
-	  default:
-	    if (yyres)
-	      yyres[yyn] = *yyp;
-	    yyn++;
-	    break;
-
-	  case '"':
-	    if (yyres)
-	      yyres[yyn] = '\0';
-	    return yyn;
-	  }
-    do_not_strip_quotes: ;
-    }
-
-  if (! yyres)
-    return yystrlen (yystr);
-
-  return yystpcpy (yyres, yystr) - yyres;
-}
-# endif
-
-/* Copy into *YYMSG, which is of size *YYMSG_ALLOC, an error message
-   about the unexpected token YYTOKEN for the state stack whose top is
-   YYSSP.
-
-   Return 0 if *YYMSG was successfully written.  Return 1 if *YYMSG is
-   not large enough to hold the message.  In that case, also set
-   *YYMSG_ALLOC to the required number of bytes.  Return 2 if the
-   required number of bytes is too large to store.  */
-static int
-yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg,
-                yytype_int16 *yyssp, int yytoken)
-{
-  YYSIZE_T yysize0 = yytnamerr (YY_NULL, yytname[yytoken]);
-  YYSIZE_T yysize = yysize0;
-  enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
-  /* Internationalized format string. */
-  const char *yyformat = YY_NULL;
-  /* Arguments of yyformat. */
-  char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
-  /* Number of reported tokens (one for the "unexpected", one per
-     "expected"). */
-  int yycount = 0;
-
-  /* There are many possibilities here to consider:
-     - Assume YYFAIL is not used.  It's too flawed to consider.  See
-       <http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html>
-       for details.  YYERROR is fine as it does not invoke this
-       function.
-     - If this state is a consistent state with a default action, then
-       the only way this function was invoked is if the default action
-       is an error action.  In that case, don't check for expected
-       tokens because there are none.
-     - The only way there can be no lookahead present (in yychar) is if
-       this state is a consistent state with a default action.  Thus,
-       detecting the absence of a lookahead is sufficient to determine
-       that there is no unexpected or expected token to report.  In that
-       case, just report a simple "syntax error".
-     - Don't assume there isn't a lookahead just because this state is a
-       consistent state with a default action.  There might have been a
-       previous inconsistent state, consistent state with a non-default
-       action, or user semantic action that manipulated yychar.
-     - Of course, the expected token list depends on states to have
-       correct lookahead information, and it depends on the parser not
-       to perform extra reductions after fetching a lookahead from the
-       scanner and before detecting a syntax error.  Thus, state merging
-       (from LALR or IELR) and default reductions corrupt the expected
-       token list.  However, the list is correct for canonical LR with
-       one exception: it will still contain any token that will not be
-       accepted due to an error action in a later state.
-  */
-  if (yytoken != YYEMPTY)
-    {
-      int yyn = yypact[*yyssp];
-      yyarg[yycount++] = yytname[yytoken];
-      if (!yypact_value_is_default (yyn))
-        {
-          /* Start YYX at -YYN if negative to avoid negative indexes in
-             YYCHECK.  In other words, skip the first -YYN actions for
-             this state because they are default actions.  */
-          int yyxbegin = yyn < 0 ? -yyn : 0;
-          /* Stay within bounds of both yycheck and yytname.  */
-          int yychecklim = YYLAST - yyn + 1;
-          int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
-          int yyx;
-
-          for (yyx = yyxbegin; yyx < yyxend; ++yyx)
-            if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR
-                && !yytable_value_is_error (yytable[yyx + yyn]))
-              {
-                if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
-                  {
-                    yycount = 1;
-                    yysize = yysize0;
-                    break;
-                  }
-                yyarg[yycount++] = yytname[yyx];
-                {
-                  YYSIZE_T yysize1 = yysize + yytnamerr (YY_NULL, yytname[yyx]);
-                  if (! (yysize <= yysize1
-                         && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
-                    return 2;
-                  yysize = yysize1;
-                }
-              }
-        }
-    }
-
-  switch (yycount)
-    {
-# define YYCASE_(N, S)                      \
-      case N:                               \
-        yyformat = S;                       \
-      break
-      YYCASE_(0, YY_("syntax error"));
-      YYCASE_(1, YY_("syntax error, unexpected %s"));
-      YYCASE_(2, YY_("syntax error, unexpected %s, expecting %s"));
-      YYCASE_(3, YY_("syntax error, unexpected %s, expecting %s or %s"));
-      YYCASE_(4, YY_("syntax error, unexpected %s, expecting %s or %s or %s"));
-      YYCASE_(5, YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"));
-# undef YYCASE_
-    }
-
-  {
-    YYSIZE_T yysize1 = yysize + yystrlen (yyformat);
-    if (! (yysize <= yysize1 && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
-      return 2;
-    yysize = yysize1;
-  }
-
-  if (*yymsg_alloc < yysize)
-    {
-      *yymsg_alloc = 2 * yysize;
-      if (! (yysize <= *yymsg_alloc
-             && *yymsg_alloc <= YYSTACK_ALLOC_MAXIMUM))
-        *yymsg_alloc = YYSTACK_ALLOC_MAXIMUM;
-      return 1;
-    }
-
-  /* Avoid sprintf, as that infringes on the user's name space.
-     Don't have undefined behavior even if the translation
-     produced a string with the wrong number of "%s"s.  */
-  {
-    char *yyp = *yymsg;
-    int yyi = 0;
-    while ((*yyp = *yyformat) != '\0')
-      if (*yyp == '%' && yyformat[1] == 's' && yyi < yycount)
-        {
-          yyp += yytnamerr (yyp, yyarg[yyi++]);
-          yyformat += 2;
-        }
-      else
-        {
-          yyp++;
-          yyformat++;
-        }
-  }
-  return 0;
-}
-#endif /* YYERROR_VERBOSE */
-
-/*-----------------------------------------------.
-| Release the memory associated to this symbol.  |
-`-----------------------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-static void
-yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep)
-#else
-static void
-yydestruct (yymsg, yytype, yyvaluep)
-    const char *yymsg;
-    int yytype;
-    YYSTYPE *yyvaluep;
-#endif
-{
-  YYUSE (yyvaluep);
-
-  if (!yymsg)
-    yymsg = "Deleting";
-  YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
-
-  switch (yytype)
-    {
-
-      default:
-        break;
-    }
-}
-
-
-
-
-/* The lookahead symbol.  */
-int yychar;
-
-
-#ifndef YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
-# define YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
-# define YY_IGNORE_MAYBE_UNINITIALIZED_END
-#endif
-#ifndef YY_INITIAL_VALUE
-# define YY_INITIAL_VALUE(Value) /* Nothing. */
-#endif
-
-/* The semantic value of the lookahead symbol.  */
-YYSTYPE yylval YY_INITIAL_VALUE(yyval_default);
-
-/* Number of syntax errors so far.  */
-int yynerrs;
-
-
-/*----------.
-| yyparse.  |
-`----------*/
-
-#ifdef YYPARSE_PARAM
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-hid_t
-yyparse (void *YYPARSE_PARAM)
-#else
-hid_t
-yyparse (YYPARSE_PARAM)
-    void *YYPARSE_PARAM;
-#endif
-#else /* ! YYPARSE_PARAM */
-#if (defined __STDC__ || defined __C99__FUNC__ \
-     || defined __cplusplus || defined _MSC_VER)
-hid_t
-yyparse (void)
-#else
-hid_t
-yyparse ()
-
-#endif
-#endif
-{
-    int yystate;
-    /* Number of tokens to shift before error messages enabled.  */
-    int yyerrstatus;
-
-    /* The stacks and their tools:
-       `yyss': related to states.
-       `yyvs': related to semantic values.
-
-       Refer to the stacks through separate pointers, to allow yyoverflow
-       to reallocate them elsewhere.  */
-
-    /* The state stack.  */
-    yytype_int16 yyssa[YYINITDEPTH];
-    yytype_int16 *yyss;
-    yytype_int16 *yyssp;
-
-    /* The semantic value stack.  */
-    YYSTYPE yyvsa[YYINITDEPTH];
-    YYSTYPE *yyvs;
-    YYSTYPE *yyvsp;
-
-    YYSIZE_T yystacksize;
-
-  int yyn;
-  int yyresult;
-  /* Lookahead token as an internal (translated) token number.  */
-  int yytoken = 0;
-  /* The variables used to return semantic value and location from the
-     action routines.  */
-  YYSTYPE yyval;
-
-#if YYERROR_VERBOSE
-  /* Buffer for error messages, and its allocated size.  */
-  char yymsgbuf[128];
-  char *yymsg = yymsgbuf;
-  YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
-#endif
-
-#define YYPOPSTACK(N)   (yyvsp -= (N), yyssp -= (N))
-
-  /* The number of symbols on the RHS of the reduced rule.
-     Keep to zero when no symbol should be popped.  */
-  int yylen = 0;
-
-  yyssp = yyss = yyssa;
-  yyvsp = yyvs = yyvsa;
-  yystacksize = YYINITDEPTH;
-
-  YYDPRINTF ((stderr, "Starting parse\n"));
-
-  yystate = 0;
-  yyerrstatus = 0;
-  yynerrs = 0;
-  yychar = YYEMPTY; /* Cause a token to be read.  */
-  goto yysetstate;
-
-/*------------------------------------------------------------.
-| yynewstate -- Push a new state, which is found in yystate.  |
-`------------------------------------------------------------*/
- yynewstate:
-  /* In all cases, when you get here, the value and location stacks
-     have just been pushed.  So pushing a state here evens the stacks.  */
-  yyssp++;
-
- yysetstate:
-  *yyssp = yystate;
-
-  if (yyss + yystacksize - 1 <= yyssp)
-    {
-      /* Get the current used size of the three stacks, in elements.  */
-      YYSIZE_T yysize = yyssp - yyss + 1;
-
-#ifdef yyoverflow
-      {
-	/* Give user a chance to reallocate the stack.  Use copies of
-	   these so that the &'s don't force the real ones into
-	   memory.  */
-	YYSTYPE *yyvs1 = yyvs;
-	yytype_int16 *yyss1 = yyss;
-
-	/* Each stack pointer address is followed by the size of the
-	   data in use in that stack, in bytes.  This used to be a
-	   conditional around just the two extra args, but that might
-	   be undefined if yyoverflow is a macro.  */
-	yyoverflow (YY_("memory exhausted"),
-		    &yyss1, yysize * sizeof (*yyssp),
-		    &yyvs1, yysize * sizeof (*yyvsp),
-		    &yystacksize);
-
-	yyss = yyss1;
-	yyvs = yyvs1;
-      }
-#else /* no yyoverflow */
-# ifndef YYSTACK_RELOCATE
-      goto yyexhaustedlab;
-# else
-      /* Extend the stack our own way.  */
-      if (YYMAXDEPTH <= yystacksize)
-	goto yyexhaustedlab;
-      yystacksize *= 2;
-      if (YYMAXDEPTH < yystacksize)
-	yystacksize = YYMAXDEPTH;
-
-      {
-	yytype_int16 *yyss1 = yyss;
-	union yyalloc *yyptr =
-	  (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
-	if (! yyptr)
-	  goto yyexhaustedlab;
-	YYSTACK_RELOCATE (yyss_alloc, yyss);
-	YYSTACK_RELOCATE (yyvs_alloc, yyvs);
-#  undef YYSTACK_RELOCATE
-	if (yyss1 != yyssa)
-	  YYSTACK_FREE (yyss1);
-      }
-# endif
-#endif /* no yyoverflow */
-
-      yyssp = yyss + yysize - 1;
-      yyvsp = yyvs + yysize - 1;
-
-      YYDPRINTF ((stderr, "Stack size increased to %lu\n",
-		  (unsigned long int) yystacksize));
-
-      if (yyss + yystacksize - 1 <= yyssp)
-	YYABORT;
-    }
-
-  YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-
-  if (yystate == YYFINAL)
-    YYACCEPT;
-
-  goto yybackup;
-
-/*-----------.
-| yybackup.  |
-`-----------*/
-yybackup:
-
-  /* Do appropriate processing given the current state.  Read a
-     lookahead token if we need one and don't already have one.  */
-
-  /* First try to decide what to do without reference to lookahead token.  */
-  yyn = yypact[yystate];
-  if (yypact_value_is_default (yyn))
-    goto yydefault;
-
-  /* Not known => get a lookahead token if don't already have one.  */
-
-  /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol.  */
-  if (yychar == YYEMPTY)
-    {
-      YYDPRINTF ((stderr, "Reading a token: "));
-      yychar = YYLEX;
-    }
-
-  if (yychar <= YYEOF)
-    {
-      yychar = yytoken = YYEOF;
-      YYDPRINTF ((stderr, "Now at end of input.\n"));
-    }
-  else
-    {
-      yytoken = YYTRANSLATE (yychar);
-      YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
-    }
-
-  /* If the proper action on seeing token YYTOKEN is to reduce or to
-     detect an error, take that action.  */
-  yyn += yytoken;
-  if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
-    goto yydefault;
-  yyn = yytable[yyn];
-  if (yyn <= 0)
-    {
-      if (yytable_value_is_error (yyn))
-        goto yyerrlab;
-      yyn = -yyn;
-      goto yyreduce;
-    }
-
-  /* Count tokens shifted since error; after three, turn off error
-     status.  */
-  if (yyerrstatus)
-    yyerrstatus--;
-
-  /* Shift the lookahead token.  */
-  YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
-
-  /* Discard the shifted token.  */
-  yychar = YYEMPTY;
-
-  yystate = yyn;
-  YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
-  *++yyvsp = yylval;
-  YY_IGNORE_MAYBE_UNINITIALIZED_END
-
-  goto yynewstate;
-
-
-/*-----------------------------------------------------------.
-| yydefault -- do the default action for the current state.  |
-`-----------------------------------------------------------*/
-yydefault:
-  yyn = yydefact[yystate];
-  if (yyn == 0)
-    goto yyerrlab;
-  goto yyreduce;
-
-
-/*-----------------------------.
-| yyreduce -- Do a reduction.  |
-`-----------------------------*/
-yyreduce:
-  /* yyn is the number of a rule to reduce with.  */
-  yylen = yyr2[yyn];
-
-  /* If YYLEN is nonzero, implement the default value of the action:
-     `$$ = $1'.
-
-     Otherwise, the following line sets YYVAL to garbage.
-     This behavior is undocumented and Bison
-     users should not rely upon it.  Assigning to YYVAL
-     unconditionally makes the parser a bit smaller, and it avoids a
-     GCC warning that YYVAL may be used uninitialized.  */
-  yyval = yyvsp[1-yylen];
-
-
-  YY_REDUCE_PRINT (yyn);
-  switch (yyn)
-    {
-        case 2:
-/* Line 1807 of yacc.c  */
-#line 101 "H5LTparse.y"
-    { memset(arr_stack, 0, STACK_SIZE*sizeof(struct arr_info)); /*initialize here?*/ }
-    break;
-
-  case 3:
-/* Line 1807 of yacc.c  */
-#line 102 "H5LTparse.y"
-    { return (yyval.hid);}
-    break;
-
-  case 13:
-/* Line 1807 of yacc.c  */
-#line 116 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_I8BE); }
-    break;
-
-  case 14:
-/* Line 1807 of yacc.c  */
-#line 117 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_I8LE); }
-    break;
-
-  case 15:
-/* Line 1807 of yacc.c  */
-#line 118 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_I16BE); }
-    break;
-
-  case 16:
-/* Line 1807 of yacc.c  */
-#line 119 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_I16LE); }
-    break;
-
-  case 17:
-/* Line 1807 of yacc.c  */
-#line 120 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_I32BE); }
-    break;
-
-  case 18:
-/* Line 1807 of yacc.c  */
-#line 121 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_I32LE); }
-    break;
-
-  case 19:
-/* Line 1807 of yacc.c  */
-#line 122 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_I64BE); }
-    break;
-
-  case 20:
-/* Line 1807 of yacc.c  */
-#line 123 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_I64LE); }
-    break;
-
-  case 21:
-/* Line 1807 of yacc.c  */
-#line 124 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_U8BE); }
-    break;
-
-  case 22:
-/* Line 1807 of yacc.c  */
-#line 125 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_U8LE); }
-    break;
-
-  case 23:
-/* Line 1807 of yacc.c  */
-#line 126 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_U16BE); }
-    break;
-
-  case 24:
-/* Line 1807 of yacc.c  */
-#line 127 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_U16LE); }
-    break;
-
-  case 25:
-/* Line 1807 of yacc.c  */
-#line 128 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_U32BE); }
-    break;
-
-  case 26:
-/* Line 1807 of yacc.c  */
-#line 129 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_U32LE); }
-    break;
-
-  case 27:
-/* Line 1807 of yacc.c  */
-#line 130 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_U64BE); }
-    break;
-
-  case 28:
-/* Line 1807 of yacc.c  */
-#line 131 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_STD_U64LE); }
-    break;
-
-  case 29:
-/* Line 1807 of yacc.c  */
-#line 132 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_CHAR); }
-    break;
-
-  case 30:
-/* Line 1807 of yacc.c  */
-#line 133 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_SCHAR); }
-    break;
-
-  case 31:
-/* Line 1807 of yacc.c  */
-#line 134 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_UCHAR); }
-    break;
-
-  case 32:
-/* Line 1807 of yacc.c  */
-#line 135 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_SHORT); }
-    break;
-
-  case 33:
-/* Line 1807 of yacc.c  */
-#line 136 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_USHORT); }
-    break;
-
-  case 34:
-/* Line 1807 of yacc.c  */
-#line 137 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_INT); }
-    break;
-
-  case 35:
-/* Line 1807 of yacc.c  */
-#line 138 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_UINT); }
-    break;
-
-  case 36:
-/* Line 1807 of yacc.c  */
-#line 139 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_LONG); }
-    break;
-
-  case 37:
-/* Line 1807 of yacc.c  */
-#line 140 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_ULONG); }
-    break;
-
-  case 38:
-/* Line 1807 of yacc.c  */
-#line 141 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_LLONG); }
-    break;
-
-  case 39:
-/* Line 1807 of yacc.c  */
-#line 142 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_ULLONG); }
-    break;
-
-  case 40:
-/* Line 1807 of yacc.c  */
-#line 145 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_IEEE_F32BE); }
-    break;
-
-  case 41:
-/* Line 1807 of yacc.c  */
-#line 146 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_IEEE_F32LE); }
-    break;
-
-  case 42:
-/* Line 1807 of yacc.c  */
-#line 147 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_IEEE_F64BE); }
-    break;
-
-  case 43:
-/* Line 1807 of yacc.c  */
-#line 148 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_IEEE_F64LE); }
-    break;
-
-  case 44:
-/* Line 1807 of yacc.c  */
-#line 149 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_FLOAT); }
-    break;
-
-  case 45:
-/* Line 1807 of yacc.c  */
-#line 150 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_DOUBLE); }
-    break;
-
-  case 46:
-/* Line 1807 of yacc.c  */
-#line 151 "H5LTparse.y"
-    { (yyval.hid) = H5Tcopy(H5T_NATIVE_LDOUBLE); }
-    break;
-
-  case 47:
-/* Line 1807 of yacc.c  */
-#line 155 "H5LTparse.y"
-    { csindex++; cmpd_stack[csindex].id = H5Tcreate(H5T_COMPOUND, 1); /*temporarily set size to 1*/ }
-    break;
-
-  case 48:
-/* Line 1807 of yacc.c  */
-#line 157 "H5LTparse.y"
-    { (yyval.hid) = cmpd_stack[csindex].id; 
-                              cmpd_stack[csindex].id = 0;
-                              cmpd_stack[csindex].first_memb = 1; 
-                              csindex--;
-                            }
-    break;
-
-  case 51:
-/* Line 1807 of yacc.c  */
-#line 166 "H5LTparse.y"
-    { cmpd_stack[csindex].is_field = 1; /*notify lexer a compound member is parsed*/ }
-    break;
-
-  case 52:
-/* Line 1807 of yacc.c  */
-#line 168 "H5LTparse.y"
-    {   
-                            size_t origin_size, new_size;
-                            hid_t dtype_id = cmpd_stack[csindex].id;
-
-                            /*Adjust size and insert member, consider both member size and offset.*/
-                            if(cmpd_stack[csindex].first_memb) { /*reclaim the size 1 temporarily set*/
-                                new_size = H5Tget_size((yyvsp[(1) - (7)].hid)) + (yyvsp[(6) - (7)].ival);
-                                H5Tset_size(dtype_id, new_size);
-                                /*member name is saved in yylval.sval by lexer*/
-                                H5Tinsert(dtype_id, (yyvsp[(4) - (7)].sval), (yyvsp[(6) - (7)].ival), (yyvsp[(1) - (7)].hid));
-
-                                cmpd_stack[csindex].first_memb = 0;
-                            } else {
-                                origin_size = H5Tget_size(dtype_id);
-                                
-                                if((yyvsp[(6) - (7)].ival) == 0) {
-                                    new_size = origin_size + H5Tget_size((yyvsp[(1) - (7)].hid));
-                                    H5Tset_size(dtype_id, new_size);
-                                    H5Tinsert(dtype_id, (yyvsp[(4) - (7)].sval), origin_size, (yyvsp[(1) - (7)].hid));
-                                } else {
-                                    new_size = (yyvsp[(6) - (7)].ival) + H5Tget_size((yyvsp[(1) - (7)].hid));
-                                    H5Tset_size(dtype_id, new_size);
-                                    H5Tinsert(dtype_id, (yyvsp[(4) - (7)].sval), (yyvsp[(6) - (7)].ival), (yyvsp[(1) - (7)].hid));
-                                }
-                            }
-                          
-                            cmpd_stack[csindex].is_field = 0;
-                            H5Tclose((yyvsp[(1) - (7)].hid));
-                             
-                            new_size = H5Tget_size(dtype_id);
-                        }
-    break;
-
-  case 53:
-/* Line 1807 of yacc.c  */
-#line 201 "H5LTparse.y"
-    {
-                            (yyval.sval) = yylval.sval;
-                        }
-    break;
-
-  case 54:
-/* Line 1807 of yacc.c  */
-#line 206 "H5LTparse.y"
-    { (yyval.ival) = 0; }
-    break;
-
-  case 55:
-/* Line 1807 of yacc.c  */
-#line 208 "H5LTparse.y"
-    { (yyval.ival) = yylval.ival; }
-    break;
-
-  case 57:
-/* Line 1807 of yacc.c  */
-#line 212 "H5LTparse.y"
-    { asindex++; /*pushd onto the stack*/ }
-    break;
-
-  case 58:
-/* Line 1807 of yacc.c  */
-#line 214 "H5LTparse.y"
-    { 
-                          (yyval.hid) = H5Tarray_create2((yyvsp[(5) - (6)].hid), arr_stack[asindex].ndims, arr_stack[asindex].dims);
-                          arr_stack[asindex].ndims = 0;
-                          asindex--;
-                          H5Tclose((yyvsp[(5) - (6)].hid));
-                        }
-    break;
-
-  case 61:
-/* Line 1807 of yacc.c  */
-#line 224 "H5LTparse.y"
-    { arr_stack[asindex].is_dim = 1; /*notice lexer of dimension size*/ }
-    break;
-
-  case 62:
-/* Line 1807 of yacc.c  */
-#line 225 "H5LTparse.y"
-    { unsigned ndims = arr_stack[asindex].ndims;
-                                  arr_stack[asindex].dims[ndims] = (hsize_t)yylval.ival; 
-                                  arr_stack[asindex].ndims++;
-                                  arr_stack[asindex].is_dim = 0; 
-                                }
-    break;
-
-  case 65:
-/* Line 1807 of yacc.c  */
-#line 236 "H5LTparse.y"
-    { (yyval.hid) = H5Tvlen_create((yyvsp[(3) - (4)].hid)); H5Tclose((yyvsp[(3) - (4)].hid)); }
-    break;
-
-  case 66:
-/* Line 1807 of yacc.c  */
-#line 241 "H5LTparse.y"
-    { is_opq_size = 1; }
-    break;
-
-  case 67:
-/* Line 1807 of yacc.c  */
-#line 242 "H5LTparse.y"
-    {   
-                                size_t size = (size_t)yylval.ival;
-                                (yyval.hid) = H5Tcreate(H5T_OPAQUE, size);
-                                is_opq_size = 0;    
-                            }
-    break;
-
-  case 68:
-/* Line 1807 of yacc.c  */
-#line 247 "H5LTparse.y"
-    { is_opq_tag = 1; }
-    break;
-
-  case 69:
-/* Line 1807 of yacc.c  */
-#line 248 "H5LTparse.y"
-    {  
-                                H5Tset_tag((yyvsp[(7) - (13)].hid), yylval.sval);
-                                is_opq_tag = 0;
-                            }
-    break;
-
-  case 70:
-/* Line 1807 of yacc.c  */
-#line 252 "H5LTparse.y"
-    { (yyval.hid) = (yyvsp[(7) - (15)].hid); }
-    break;
-
-  case 73:
-/* Line 1807 of yacc.c  */
-#line 260 "H5LTparse.y"
-    { is_str_size = 1; }
-    break;
-
-  case 74:
-/* Line 1807 of yacc.c  */
-#line 261 "H5LTparse.y"
-    {  
-                                if((yyvsp[(5) - (6)].ival) == H5T_VARIABLE_TOKEN)
-                                    is_variable = 1;
-                                else 
-                                    str_size = yylval.ival;
-                                is_str_size = 0; 
-                            }
-    break;
-
-  case 75:
-/* Line 1807 of yacc.c  */
-#line 269 "H5LTparse.y"
-    {
-                                if((yyvsp[(9) - (10)].ival) == H5T_STR_NULLTERM_TOKEN)
-                                    str_pad = H5T_STR_NULLTERM;
-                                else if((yyvsp[(9) - (10)].ival) == H5T_STR_NULLPAD_TOKEN)
-                                    str_pad = H5T_STR_NULLPAD;
-                                else if((yyvsp[(9) - (10)].ival) == H5T_STR_SPACEPAD_TOKEN)
-                                    str_pad = H5T_STR_SPACEPAD;
-                            }
-    break;
-
-  case 76:
-/* Line 1807 of yacc.c  */
-#line 278 "H5LTparse.y"
-    {  
-                                if((yyvsp[(13) - (14)].ival) == H5T_CSET_ASCII_TOKEN)
-                                    str_cset = H5T_CSET_ASCII;
-                                else if((yyvsp[(13) - (14)].ival) == H5T_CSET_UTF8_TOKEN)
-                                    str_cset = H5T_CSET_UTF8;
-                            }
-    break;
-
-  case 77:
-/* Line 1807 of yacc.c  */
-#line 285 "H5LTparse.y"
-    {
-                                if((yyvsp[(17) - (18)].hid) == H5T_C_S1_TOKEN)
-                                    (yyval.hid) = H5Tcopy(H5T_C_S1);
-                                else if((yyvsp[(17) - (18)].hid) == H5T_FORTRAN_S1_TOKEN)
-                                    (yyval.hid) = H5Tcopy(H5T_FORTRAN_S1);
-                            }
-    break;
-
-  case 78:
-/* Line 1807 of yacc.c  */
-#line 292 "H5LTparse.y"
-    {   
-                                hid_t str_id = (yyvsp[(19) - (20)].hid);
-
-                                /*set string size*/
-                                if(is_variable) {
-                                    H5Tset_size(str_id, H5T_VARIABLE);
-                                    is_variable = 0;
-                                } else
-                                    H5Tset_size(str_id, str_size);
-                                
-                                /*set string padding and character set*/
-                                H5Tset_strpad(str_id, str_pad);
-                                H5Tset_cset(str_id, str_cset);
-
-                                (yyval.hid) = str_id; 
-                            }
-    break;
-
-  case 79:
-/* Line 1807 of yacc.c  */
-#line 309 "H5LTparse.y"
-    {(yyval.ival) = H5T_VARIABLE_TOKEN;}
-    break;
-
-  case 81:
-/* Line 1807 of yacc.c  */
-#line 312 "H5LTparse.y"
-    {(yyval.ival) = H5T_STR_NULLTERM_TOKEN;}
-    break;
-
-  case 82:
-/* Line 1807 of yacc.c  */
-#line 313 "H5LTparse.y"
-    {(yyval.ival) = H5T_STR_NULLPAD_TOKEN;}
-    break;
-
-  case 83:
-/* Line 1807 of yacc.c  */
-#line 314 "H5LTparse.y"
-    {(yyval.ival) = H5T_STR_SPACEPAD_TOKEN;}
-    break;
-
-  case 84:
-/* Line 1807 of yacc.c  */
-#line 316 "H5LTparse.y"
-    {(yyval.ival) = H5T_CSET_ASCII_TOKEN;}
-    break;
-
-  case 85:
-/* Line 1807 of yacc.c  */
-#line 317 "H5LTparse.y"
-    {(yyval.ival) = H5T_CSET_UTF8_TOKEN;}
-    break;
-
-  case 86:
-/* Line 1807 of yacc.c  */
-#line 319 "H5LTparse.y"
-    {(yyval.hid) = H5T_C_S1_TOKEN;}
-    break;
-
-  case 87:
-/* Line 1807 of yacc.c  */
-#line 320 "H5LTparse.y"
-    {(yyval.hid) = H5T_FORTRAN_S1_TOKEN;}
-    break;
-
-  case 88:
-/* Line 1807 of yacc.c  */
-#line 324 "H5LTparse.y"
-    { is_enum = 1; enum_id = H5Tenum_create((yyvsp[(3) - (4)].hid)); H5Tclose((yyvsp[(3) - (4)].hid)); }
-    break;
-
-  case 89:
-/* Line 1807 of yacc.c  */
-#line 326 "H5LTparse.y"
-    { is_enum = 0; /*reset*/ (yyval.hid) = enum_id; }
-    break;
-
-  case 92:
-/* Line 1807 of yacc.c  */
-#line 331 "H5LTparse.y"
-    {
-                                                is_enum_memb = 1; /*indicate member of enum*/
-#ifdef H5_HAVE_WIN32_API
-                                                enum_memb_symbol = _strdup(yylval.sval); 
-#else /* H5_HAVE_WIN32_API */
-                                                enum_memb_symbol = strdup(yylval.sval); 
-#endif  /* H5_HAVE_WIN32_API */
-                                            }
-    break;
-
-  case 93:
-/* Line 1807 of yacc.c  */
-#line 340 "H5LTparse.y"
-    {
-                                char char_val=(char)yylval.ival;
-                                short short_val=(short)yylval.ival;
-                                int int_val=(int)yylval.ival;
-                                long long_val=(long)yylval.ival;
-                                long long llong_val=(long long)yylval.ival;
-                                hid_t super = H5Tget_super(enum_id);
-                                hid_t native = H5Tget_native_type(super, H5T_DIR_ASCEND);
-                                H5T_order_t super_order = H5Tget_order(super);
-                                H5T_order_t native_order = H5Tget_order(native);
- 
-                                if(is_enum && is_enum_memb) { /*if it's an enum member*/
-                                    /*To handle machines of different endianness*/
-                                    if(H5Tequal(native, H5T_NATIVE_SCHAR) || H5Tequal(native, H5T_NATIVE_UCHAR)) {
-                                        if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &char_val, NULL, H5P_DEFAULT); 
-                                        H5Tenum_insert(enum_id, enum_memb_symbol, &char_val);
-                                    } else if(H5Tequal(native, H5T_NATIVE_SHORT) || H5Tequal(native, H5T_NATIVE_USHORT)) {
-                                        if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &short_val, NULL, H5P_DEFAULT); 
-                                        H5Tenum_insert(enum_id, enum_memb_symbol, &short_val);
-                                    } else if(H5Tequal(native, H5T_NATIVE_INT) || H5Tequal(native, H5T_NATIVE_UINT)) {
-                                        if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &int_val, NULL, H5P_DEFAULT); 
-                                        H5Tenum_insert(enum_id, enum_memb_symbol, &int_val);
-                                    } else if(H5Tequal(native, H5T_NATIVE_LONG) || H5Tequal(native, H5T_NATIVE_ULONG)) {
-                                        if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &long_val, NULL, H5P_DEFAULT); 
-                                        H5Tenum_insert(enum_id, enum_memb_symbol, &long_val);
-                                    } else if(H5Tequal(native, H5T_NATIVE_LLONG) || H5Tequal(native, H5T_NATIVE_ULLONG)) {
-                                        if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &llong_val, NULL, H5P_DEFAULT); 
-                                        H5Tenum_insert(enum_id, enum_memb_symbol, &llong_val);
-                                    }
-
-                                    is_enum_memb = 0; 
-                                    if(enum_memb_symbol) free(enum_memb_symbol);
-                                }
-
-                                H5Tclose(super);
-                                H5Tclose(native);
-                            }
-    break;
-
-
-/* Line 1807 of yacc.c  */
-#line 2191 "H5LTparse.c"
-      default: break;
-    }
-  /* User semantic actions sometimes alter yychar, and that requires
-     that yytoken be updated with the new translation.  We take the
-     approach of translating immediately before every use of yytoken.
-     One alternative is translating here after every semantic action,
-     but that translation would be missed if the semantic action invokes
-     YYABORT, YYACCEPT, or YYERROR immediately after altering yychar or
-     if it invokes YYBACKUP.  In the case of YYABORT or YYACCEPT, an
-     incorrect destructor might then be invoked immediately.  In the
-     case of YYERROR or YYBACKUP, subsequent parser actions might lead
-     to an incorrect destructor call or verbose syntax error message
-     before the lookahead is translated.  */
-  YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
-
-  YYPOPSTACK (yylen);
-  yylen = 0;
-  YY_STACK_PRINT (yyss, yyssp);
-
-  *++yyvsp = yyval;
-
-  /* Now `shift' the result of the reduction.  Determine what state
-     that goes to, based on the state we popped back to and the rule
-     number reduced by.  */
-
-  yyn = yyr1[yyn];
-
-  yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
-  if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
-    yystate = yytable[yystate];
-  else
-    yystate = yydefgoto[yyn - YYNTOKENS];
-
-  goto yynewstate;
-
-
-/*------------------------------------.
-| yyerrlab -- here on detecting error |
-`------------------------------------*/
-yyerrlab:
-  /* Make sure we have latest lookahead translation.  See comments at
-     user semantic actions for why this is necessary.  */
-  yytoken = yychar == YYEMPTY ? YYEMPTY : YYTRANSLATE (yychar);
-
-  /* If not already recovering from an error, report this error.  */
-  if (!yyerrstatus)
-    {
-      ++yynerrs;
-#if ! YYERROR_VERBOSE
-      yyerror (YY_("syntax error"));
-#else
-# define YYSYNTAX_ERROR yysyntax_error (&yymsg_alloc, &yymsg, \
-                                        yyssp, yytoken)
-      {
-        char const *yymsgp = YY_("syntax error");
-        int yysyntax_error_status;
-        yysyntax_error_status = YYSYNTAX_ERROR;
-        if (yysyntax_error_status == 0)
-          yymsgp = yymsg;
-        else if (yysyntax_error_status == 1)
-          {
-            if (yymsg != yymsgbuf)
-              YYSTACK_FREE (yymsg);
-            yymsg = (char *) YYSTACK_ALLOC (yymsg_alloc);
-            if (!yymsg)
-              {
-                yymsg = yymsgbuf;
-                yymsg_alloc = sizeof yymsgbuf;
-                yysyntax_error_status = 2;
-              }
-            else
-              {
-                yysyntax_error_status = YYSYNTAX_ERROR;
-                yymsgp = yymsg;
-              }
-          }
-        yyerror (yymsgp);
-        if (yysyntax_error_status == 2)
-          goto yyexhaustedlab;
-      }
-# undef YYSYNTAX_ERROR
-#endif
-    }
-
-
-
-  if (yyerrstatus == 3)
-    {
-      /* If just tried and failed to reuse lookahead token after an
-	 error, discard it.  */
-
-      if (yychar <= YYEOF)
-	{
-	  /* Return failure if at end of input.  */
-	  if (yychar == YYEOF)
-	    YYABORT;
-	}
-      else
-	{
-	  yydestruct ("Error: discarding",
-		      yytoken, &yylval);
-	  yychar = YYEMPTY;
-	}
-    }
-
-  /* Else will try to reuse lookahead token after shifting the error
-     token.  */
-  goto yyerrlab1;
-
-
-/*---------------------------------------------------.
-| yyerrorlab -- error raised explicitly by YYERROR.  |
-`---------------------------------------------------*/
-yyerrorlab:
-
-  /* Pacify compilers like GCC when the user code never invokes
-     YYERROR and the label yyerrorlab therefore never appears in user
-     code.  */
-  if (/*CONSTCOND*/ 0)
-     goto yyerrorlab;
-
-  /* Do not reclaim the symbols of the rule which action triggered
-     this YYERROR.  */
-  YYPOPSTACK (yylen);
-  yylen = 0;
-  YY_STACK_PRINT (yyss, yyssp);
-  yystate = *yyssp;
-  goto yyerrlab1;
-
-
-/*-------------------------------------------------------------.
-| yyerrlab1 -- common code for both syntax error and YYERROR.  |
-`-------------------------------------------------------------*/
-yyerrlab1:
-  yyerrstatus = 3;	/* Each real token shifted decrements this.  */
-
-  for (;;)
-    {
-      yyn = yypact[yystate];
-      if (!yypact_value_is_default (yyn))
-	{
-	  yyn += YYTERROR;
-	  if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
-	    {
-	      yyn = yytable[yyn];
-	      if (0 < yyn)
-		break;
-	    }
-	}
-
-      /* Pop the current state because it cannot handle the error token.  */
-      if (yyssp == yyss)
-	YYABORT;
-
-
-      yydestruct ("Error: popping",
-		  yystos[yystate], yyvsp);
-      YYPOPSTACK (1);
-      yystate = *yyssp;
-      YY_STACK_PRINT (yyss, yyssp);
-    }
-
-  YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
-  *++yyvsp = yylval;
-  YY_IGNORE_MAYBE_UNINITIALIZED_END
-
-
-  /* Shift the error token.  */
-  YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
-
-  yystate = yyn;
-  goto yynewstate;
-
-
-/*-------------------------------------.
-| yyacceptlab -- YYACCEPT comes here.  |
-`-------------------------------------*/
-yyacceptlab:
-  yyresult = 0;
-  goto yyreturn;
-
-/*-----------------------------------.
-| yyabortlab -- YYABORT comes here.  |
-`-----------------------------------*/
-yyabortlab:
-  yyresult = 1;
-  goto yyreturn;
-
-#if !defined yyoverflow || YYERROR_VERBOSE
-/*-------------------------------------------------.
-| yyexhaustedlab -- memory exhaustion comes here.  |
-`-------------------------------------------------*/
-yyexhaustedlab:
-  yyerror (YY_("memory exhausted"));
-  yyresult = 2;
-  /* Fall through.  */
-#endif
-
-yyreturn:
-  if (yychar != YYEMPTY)
-    {
-      /* Make sure we have latest lookahead translation.  See comments at
-         user semantic actions for why this is necessary.  */
-      yytoken = YYTRANSLATE (yychar);
-      yydestruct ("Cleanup: discarding lookahead",
-                  yytoken, &yylval);
-    }
-  /* Do not reclaim the symbols of the rule which action triggered
-     this YYABORT or YYACCEPT.  */
-  YYPOPSTACK (yylen);
-  YY_STACK_PRINT (yyss, yyssp);
-  while (yyssp != yyss)
-    {
-      yydestruct ("Cleanup: popping",
-		  yystos[*yyssp], yyvsp);
-      YYPOPSTACK (1);
-    }
-#ifndef yyoverflow
-  if (yyss != yyssa)
-    YYSTACK_FREE (yyss);
-#endif
-#if YYERROR_VERBOSE
-  if (yymsg != yymsgbuf)
-    YYSTACK_FREE (yymsg);
-#endif
-  /* Make sure YYID is used.  */
-  return YYID (yyresult);
-}
-
-
diff --git a/hl/src/H5LTparse.h b/hl/src/H5LTparse.h
deleted file mode 100644
index 621dacd..0000000
--- a/hl/src/H5LTparse.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* A Bison parser, made by GNU Bison 2.7.  */
-
-/* Bison interface for Yacc-like parsers in C
-   
-      Copyright (C) 1984, 1989-1990, 2000-2012 Free Software Foundation, Inc.
-   
-   This program is free software: you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation, either version 3 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-/* As a special exception, you may create a larger work that contains
-   part or all of the Bison parser skeleton and distribute that work
-   under terms of your choice, so long as that work isn't itself a
-   parser generator using the skeleton or a modified version thereof
-   as a parser skeleton.  Alternatively, if you modify or redistribute
-   the parser skeleton itself, you may (at your option) remove this
-   special exception, which will cause the skeleton and the resulting
-   Bison output files to be licensed under the GNU General Public
-   License without this special exception.
-   
-   This special exception was added by the Free Software Foundation in
-   version 2.2 of Bison.  */
-
-#ifndef YY_H5LTYY_H5LTPARSE_H_INCLUDED
-# define YY_H5LTYY_H5LTPARSE_H_INCLUDED
-/* Enabling traces.  */
-#ifndef YYDEBUG
-# define YYDEBUG 0
-#endif
-#if YYDEBUG
-extern int H5LTyydebug;
-#endif
-
-/* Tokens.  */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
-   /* Put the tokens into the symbol table, so that GDB and other debuggers
-      know about them.  */
-   enum yytokentype {
-     H5T_STD_I8BE_TOKEN = 258,
-     H5T_STD_I8LE_TOKEN = 259,
-     H5T_STD_I16BE_TOKEN = 260,
-     H5T_STD_I16LE_TOKEN = 261,
-     H5T_STD_I32BE_TOKEN = 262,
-     H5T_STD_I32LE_TOKEN = 263,
-     H5T_STD_I64BE_TOKEN = 264,
-     H5T_STD_I64LE_TOKEN = 265,
-     H5T_STD_U8BE_TOKEN = 266,
-     H5T_STD_U8LE_TOKEN = 267,
-     H5T_STD_U16BE_TOKEN = 268,
-     H5T_STD_U16LE_TOKEN = 269,
-     H5T_STD_U32BE_TOKEN = 270,
-     H5T_STD_U32LE_TOKEN = 271,
-     H5T_STD_U64BE_TOKEN = 272,
-     H5T_STD_U64LE_TOKEN = 273,
-     H5T_NATIVE_CHAR_TOKEN = 274,
-     H5T_NATIVE_SCHAR_TOKEN = 275,
-     H5T_NATIVE_UCHAR_TOKEN = 276,
-     H5T_NATIVE_SHORT_TOKEN = 277,
-     H5T_NATIVE_USHORT_TOKEN = 278,
-     H5T_NATIVE_INT_TOKEN = 279,
-     H5T_NATIVE_UINT_TOKEN = 280,
-     H5T_NATIVE_LONG_TOKEN = 281,
-     H5T_NATIVE_ULONG_TOKEN = 282,
-     H5T_NATIVE_LLONG_TOKEN = 283,
-     H5T_NATIVE_ULLONG_TOKEN = 284,
-     H5T_IEEE_F32BE_TOKEN = 285,
-     H5T_IEEE_F32LE_TOKEN = 286,
-     H5T_IEEE_F64BE_TOKEN = 287,
-     H5T_IEEE_F64LE_TOKEN = 288,
-     H5T_NATIVE_FLOAT_TOKEN = 289,
-     H5T_NATIVE_DOUBLE_TOKEN = 290,
-     H5T_NATIVE_LDOUBLE_TOKEN = 291,
-     H5T_STRING_TOKEN = 292,
-     STRSIZE_TOKEN = 293,
-     STRPAD_TOKEN = 294,
-     CSET_TOKEN = 295,
-     CTYPE_TOKEN = 296,
-     H5T_VARIABLE_TOKEN = 297,
-     H5T_STR_NULLTERM_TOKEN = 298,
-     H5T_STR_NULLPAD_TOKEN = 299,
-     H5T_STR_SPACEPAD_TOKEN = 300,
-     H5T_CSET_ASCII_TOKEN = 301,
-     H5T_CSET_UTF8_TOKEN = 302,
-     H5T_C_S1_TOKEN = 303,
-     H5T_FORTRAN_S1_TOKEN = 304,
-     H5T_OPAQUE_TOKEN = 305,
-     OPQ_SIZE_TOKEN = 306,
-     OPQ_TAG_TOKEN = 307,
-     H5T_COMPOUND_TOKEN = 308,
-     H5T_ENUM_TOKEN = 309,
-     H5T_ARRAY_TOKEN = 310,
-     H5T_VLEN_TOKEN = 311,
-     STRING = 312,
-     NUMBER = 313
-   };
-#endif
-
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-{
-/* Line 2065 of yacc.c  */
-#line 68 "H5LTparse.y"
-
-    int     ival;         /*for integer token*/
-    char    *sval;        /*for name string*/
-    hid_t   hid;          /*for hid_t token*/
-
-
-/* Line 2065 of yacc.c  */
-#line 122 "H5LTparse.h"
-} YYSTYPE;
-# define YYSTYPE_IS_TRIVIAL 1
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-#endif
-
-extern YYSTYPE H5LTyylval;
-
-#ifdef YYPARSE_PARAM
-#if defined __STDC__ || defined __cplusplus
-int H5LTyyparse (void *YYPARSE_PARAM);
-#else
-int H5LTyyparse ();
-#endif
-#else /* ! YYPARSE_PARAM */
-#if defined __STDC__ || defined __cplusplus
-int H5LTyyparse (void);
-#else
-int H5LTyyparse ();
-#endif
-#endif /* ! YYPARSE_PARAM */
-
-#endif /* !YY_H5LTYY_H5LTPARSE_H_INCLUDED  */
diff --git a/hl/src/H5TB.c b/hl/src/H5TB.c
index 1ca41a8..0f90393 100644
--- a/hl/src/H5TB.c
+++ b/hl/src/H5TB.c
@@ -2718,7 +2718,7 @@ herr_t H5TBdelete_field(hid_t loc_id,
             goto out;
 
         /* skip the field to delete */
-        if(!H5TB_find_field(member_name, field_name) > 0) {
+        if(!H5TB_find_field(member_name, field_name)) {
             /* get the member type */
             if((member_type_id = H5Tget_member_type(tid_1, (unsigned)i)) < 0)
                 goto out;
diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in
deleted file mode 100644
index 4624a08..0000000
--- a/hl/src/Makefile.in
+++ /dev/null
@@ -1,1436 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 High-Level Library Makefile(.in)
-#
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/lt_vers.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(include_HEADERS) \
-	$(top_srcdir)/bin/test-driver COPYING
-TESTS =
-subdir = hl/src
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libhdf5_hl_la_DEPENDENCIES = $(LIBHDF5)
-am_libhdf5_hl_la_OBJECTS = H5DO.lo H5DS.lo H5IM.lo H5LT.lo \
-	H5LTanalyze.lo H5LTparse.lo H5PT.lo H5TB.lo
-libhdf5_hl_la_OBJECTS = $(am_libhdf5_hl_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-libhdf5_hl_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libhdf5_hl_la_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = $(libhdf5_hl_la_SOURCES)
-DIST_SOURCES = $(libhdf5_hl_la_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-HEADERS = $(include_HEADERS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Add include directories to the C preprocessor flags
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# Add libtool shared library version numbers to the HDF5 library
-# See libtool versioning documentation online.
-# After making changes, run bin/reconfigure to update other configure related
-# files like Makefile.in.
-LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 221
-LT_VERS_AGE = 0
-
-# This library is our main target.
-lib_LTLIBRARIES = libhdf5_hl.la
-
-# Add libtool numbers to the HDF5 hl library (from config/lt_vers.am)
-libhdf5_hl_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVISION):$(LT_VERS_AGE) $(AM_LDFLAGS)
-
-# List sources to include in the HDF5 HL Library.
-libhdf5_hl_la_SOURCES = H5DO.c H5DS.c H5IM.c H5LT.c H5LTanalyze.c H5LTparse.c H5PT.c H5TB.c
-
-# HDF5 HL library depends on HDF5 Library.
-libhdf5_hl_la_LIBADD = $(LIBHDF5)
-
-# Public header files (to be installed)
-include_HEADERS = hdf5_hl.h H5DOpublic.h H5IMpublic.h H5LTpublic.h H5TBpublic.h H5DSpublic.h H5PTpublic.h
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/src/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-	}
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	test -z "$$locs" || { \
-	  echo rm -f $${locs}; \
-	  rm -f $${locs}; \
-	}
-
-libhdf5_hl.la: $(libhdf5_hl_la_OBJECTS) $(libhdf5_hl_la_DEPENDENCIES) $(EXTRA_libhdf5_hl_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(libhdf5_hl_la_LINK) -rpath $(libdir) $(libhdf5_hl_la_OBJECTS) $(libhdf5_hl_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DO.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DS.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IM.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5LT.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5LTanalyze.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5LTparse.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PT.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5TB.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-includeHEADERS: $(include_HEADERS)
-	@$(NORMAL_INSTALL)
-	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
-	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
-	done
-
-uninstall-includeHEADERS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(HEADERS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-includeHEADERS
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-generic clean-libLTLIBRARIES \
-	clean-libtool cscopelist-am ctags ctags-am distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-includeHEADERS install-info \
-	install-info-am install-libLTLIBRARIES install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
-	uninstall-includeHEADERS uninstall-libLTLIBRARIES
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in
deleted file mode 100644
index 325a426..0000000
--- a/hl/test/Makefile.in
+++ /dev/null
@@ -1,1496 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-#
-#
-# HDF5 High-Level Test Makefile(.in)
-#
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/H5srcdir_str.h.in $(top_srcdir)/bin/depcomp \
-	$(top_srcdir)/bin/test-driver COPYING
-check_PROGRAMS = $(am__EXEEXT_1)
-@BUILD_ALL_CONDITIONAL_TRUE@noinst_PROGRAMS = $(am__EXEEXT_2)
-TESTS = $(am__EXEEXT_1)
-subdir = hl/test
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = H5srcdir_str.h
-CONFIG_CLEAN_VPATH_FILES =
-am__EXEEXT_1 = test_lite$(EXEEXT) test_image$(EXEEXT) \
-	test_file_image$(EXEEXT) test_table$(EXEEXT) test_ds$(EXEEXT) \
-	test_packet$(EXEEXT) test_dset_opt$(EXEEXT)
-am__EXEEXT_2 = gen_test_ds$(EXEEXT)
-PROGRAMS = $(noinst_PROGRAMS)
-gen_test_ds_SOURCES = gen_test_ds.c
-gen_test_ds_OBJECTS = gen_test_ds.$(OBJEXT)
-gen_test_ds_LDADD = $(LDADD)
-gen_test_ds_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-test_ds_SOURCES = test_ds.c
-test_ds_OBJECTS = test_ds.$(OBJEXT)
-test_ds_LDADD = $(LDADD)
-test_ds_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
-test_dset_opt_SOURCES = test_dset_opt.c
-test_dset_opt_OBJECTS = test_dset_opt.$(OBJEXT)
-test_dset_opt_LDADD = $(LDADD)
-test_dset_opt_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
-test_file_image_SOURCES = test_file_image.c
-test_file_image_OBJECTS = test_file_image.$(OBJEXT)
-test_file_image_LDADD = $(LDADD)
-test_file_image_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
-test_image_SOURCES = test_image.c
-test_image_OBJECTS = test_image.$(OBJEXT)
-test_image_LDADD = $(LDADD)
-test_image_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
-test_lite_SOURCES = test_lite.c
-test_lite_OBJECTS = test_lite.$(OBJEXT)
-test_lite_LDADD = $(LDADD)
-test_lite_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
-test_packet_SOURCES = test_packet.c
-test_packet_OBJECTS = test_packet.$(OBJEXT)
-test_packet_LDADD = $(LDADD)
-test_packet_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
-test_table_SOURCES = test_table.c
-test_table_OBJECTS = test_table.$(OBJEXT)
-test_table_LDADD = $(LDADD)
-test_table_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = gen_test_ds.c test_ds.c test_dset_opt.c test_file_image.c \
-	test_image.c test_lite.c test_packet.c test_table.c
-DIST_SOURCES = gen_test_ds.c test_ds.c test_dset_opt.c \
-	test_file_image.c test_image.c test_lite.c test_packet.c \
-	test_table.c
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Add include directories to C preprocessor flags
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I. -I$(srcdir) \
-	-I$(top_builddir)/src -I$(top_srcdir)/src \
-	-I$(top_builddir)/test -I$(top_srcdir)/test \
-	-I$(top_srcdir)/hl/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files.  These files are the ones created by running `make test'.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 \
-	combine_tables[1-2].h5 test_ds[1-9].h5 test_ds10.h5 \
-	test_image[1-3].h5 file_img[1-2].h5 test_lite[1-4].h5 \
-	test_table.h5 test_packet_table.h5 test_packet_compress.h5 \
-	test_detach.h5 test_dectris.h5
-
-# The tests depend on the hdf5, hdf5 test,  and hdf5_hl libraries
-LDADD = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
-
-# Test programs.  These are our main targets.  They should be listed in the
-# order to be executed, generally most specific tests to least specific tests.
-TEST_PROG = test_lite test_image test_file_image test_table test_ds test_packet test_dset_opt
-
-# These programs generate test files for the tests.  They don't need to be
-# compiled every time we want to test the library.  However, putting
-# them in a conditional causes automake to generate rules so that they
-# can be built by hand.  They can also be built by specifying
-# --enable-build-all at configure time.
-BUILD_ALL_PROGS = gen_test_ds
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/test/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/test/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-H5srcdir_str.h: $(top_builddir)/config.status $(srcdir)/H5srcdir_str.h.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-gen_test_ds$(EXEEXT): $(gen_test_ds_OBJECTS) $(gen_test_ds_DEPENDENCIES) $(EXTRA_gen_test_ds_DEPENDENCIES) 
-	@rm -f gen_test_ds$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(gen_test_ds_OBJECTS) $(gen_test_ds_LDADD) $(LIBS)
-
-test_ds$(EXEEXT): $(test_ds_OBJECTS) $(test_ds_DEPENDENCIES) $(EXTRA_test_ds_DEPENDENCIES) 
-	@rm -f test_ds$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(test_ds_OBJECTS) $(test_ds_LDADD) $(LIBS)
-
-test_dset_opt$(EXEEXT): $(test_dset_opt_OBJECTS) $(test_dset_opt_DEPENDENCIES) $(EXTRA_test_dset_opt_DEPENDENCIES) 
-	@rm -f test_dset_opt$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(test_dset_opt_OBJECTS) $(test_dset_opt_LDADD) $(LIBS)
-
-test_file_image$(EXEEXT): $(test_file_image_OBJECTS) $(test_file_image_DEPENDENCIES) $(EXTRA_test_file_image_DEPENDENCIES) 
-	@rm -f test_file_image$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(test_file_image_OBJECTS) $(test_file_image_LDADD) $(LIBS)
-
-test_image$(EXEEXT): $(test_image_OBJECTS) $(test_image_DEPENDENCIES) $(EXTRA_test_image_DEPENDENCIES) 
-	@rm -f test_image$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(test_image_OBJECTS) $(test_image_LDADD) $(LIBS)
-
-test_lite$(EXEEXT): $(test_lite_OBJECTS) $(test_lite_DEPENDENCIES) $(EXTRA_test_lite_DEPENDENCIES) 
-	@rm -f test_lite$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(test_lite_OBJECTS) $(test_lite_LDADD) $(LIBS)
-
-test_packet$(EXEEXT): $(test_packet_OBJECTS) $(test_packet_DEPENDENCIES) $(EXTRA_test_packet_DEPENDENCIES) 
-	@rm -f test_packet$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(test_packet_OBJECTS) $(test_packet_LDADD) $(LIBS)
-
-test_table$(EXEEXT): $(test_table_OBJECTS) $(test_table_DEPENDENCIES) $(EXTRA_test_table_DEPENDENCIES) 
-	@rm -f test_table$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(test_table_OBJECTS) $(test_table_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_test_ds.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_ds.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_dset_opt.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_file_image.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_image.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_lite.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_packet.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_table.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-test_lite.log: test_lite$(EXEEXT)
-	@p='test_lite$(EXEEXT)'; \
-	b='test_lite'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-test_image.log: test_image$(EXEEXT)
-	@p='test_image$(EXEEXT)'; \
-	b='test_image'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-test_file_image.log: test_file_image$(EXEEXT)
-	@p='test_file_image$(EXEEXT)'; \
-	b='test_file_image'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-test_table.log: test_table$(EXEEXT)
-	@p='test_table$(EXEEXT)'; \
-	b='test_table'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-test_ds.log: test_ds$(EXEEXT)
-	@p='test_ds$(EXEEXT)'; \
-	b='test_ds'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-test_packet.log: test_packet$(EXEEXT)
-	@p='test_packet$(EXEEXT)'; \
-	b='test_packet'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-test_dset_opt.log: test_dset_opt$(EXEEXT)
-	@p='test_dset_opt$(EXEEXT)'; \
-	b='test_dset_opt'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
-	clean-noinstPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
-	clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
-	uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/test/test_image.c b/hl/test/test_image.c
index 5d68eeb..8ba0083 100644
--- a/hl/test/test_image.c
+++ b/hl/test/test_image.c
@@ -540,7 +540,7 @@ static int test_generate(void)
 {
     hid_t    fid;
     hsize_t  pal_dims[2] = { 256, 3 };
-    float    *data;
+    float    *data = NULL;
     int      imax, jmax, kmax;
     int      n_elements;
     float    valex, xmin, xmax, value;
diff --git a/hl/test/test_lite.c b/hl/test/test_lite.c
index d4e5f93..9d625e9 100644
--- a/hl/test/test_lite.c
+++ b/hl/test/test_lite.c
@@ -1196,7 +1196,7 @@ static int test_strings(void)
     H5T_str_t   str_pad;
     H5T_cset_t  str_cset;
     H5T_class_t type_class;
-    char*   dt_str;
+    char*   dt_str = NULL;
     size_t  str_len;
 
     TESTING3("        text for string types");
diff --git a/hl/tools/Makefile.in b/hl/tools/Makefile.in
deleted file mode 100644
index 0e06376..0000000
--- a/hl/tools/Makefile.in
+++ /dev/null
@@ -1,1371 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tools HDF5 Makefile(.in)
-#
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver COPYING
-TESTS =
-subdir = hl/tools
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	check recheck distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# All subdirectories
-SUBDIRS = gif2h5
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/tools/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/tools/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
-all-am: Makefile all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) check-am install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
-	check check-TESTS check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
-	recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in
deleted file mode 100644
index b41fcb3..0000000
--- a/hl/tools/gif2h5/Makefile.in
+++ /dev/null
@@ -1,1442 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Makefile(.in)
-#
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/h52giftest.sh.in $(top_srcdir)/bin/depcomp \
-	$(top_srcdir)/bin/test-driver
-bin_PROGRAMS = gif2h5$(EXEEXT) h52gif$(EXEEXT)
-noinst_PROGRAMS = h52gifgentst$(EXEEXT)
-TESTS = $(TEST_SCRIPT)
-subdir = hl/tools/gif2h5
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = h52giftest.sh
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
-am_gif2h5_OBJECTS = gif2hdf.$(OBJEXT) gif2mem.$(OBJEXT) \
-	decompress.$(OBJEXT) gifread.$(OBJEXT) writehdf.$(OBJEXT)
-gif2h5_OBJECTS = $(am_gif2h5_OBJECTS)
-gif2h5_LDADD = $(LDADD)
-gif2h5_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-gif2h5_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(gif2h5_LDFLAGS) $(LDFLAGS) -o $@
-am_h52gif_OBJECTS = hdf2gif.$(OBJEXT) hdfgifwr.$(OBJEXT)
-h52gif_OBJECTS = $(am_h52gif_OBJECTS)
-h52gif_LDADD = $(LDADD)
-h52gif_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TOOLS) $(LIBHDF5)
-h52gif_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h52gif_LDFLAGS) $(LDFLAGS) -o $@
-am_h52gifgentst_OBJECTS = h52gifgentst.$(OBJEXT)
-h52gifgentst_OBJECTS = $(am_h52gifgentst_OBJECTS)
-h52gifgentst_LDADD = $(LDADD)
-h52gifgentst_DEPENDENCIES = $(LIBH5_HL) $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = $(gif2h5_SOURCES) $(h52gif_SOURCES) $(h52gifgentst_SOURCES)
-DIST_SOURCES = $(gif2h5_SOURCES) $(h52gif_SOURCES) \
-	$(h52gifgentst_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src and tools/lib directories
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/tools/lib -I$(top_srcdir)/hl/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.gif
-
-# These are our main targets, the tools
-TEST_SCRIPT = h52giftest.sh
-check_SCRIPTS = $(TEST_SCRIPT)
-
-# Add h52gif and gif2h5 specific linker flags here
-h52gif_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-gif2h5_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-gif2h5_SOURCES = gif2hdf.c gif2mem.c decompress.c gifread.c writehdf.c 
-h52gif_SOURCES = hdf2gif.c hdfgifwr.c 
-h52gifgentst_SOURCES = h52gifgentst.c 
-
-# Programs all depend on the hdf5 library, the tools library, and the HL
-# library.
-LDADD = $(LIBH5_HL) $(LIBH5TOOLS) $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/tools/gif2h5/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign hl/tools/gif2h5/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-h52giftest.sh: $(top_builddir)/config.status $(srcdir)/h52giftest.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
-	 || test -f $$p1 \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' \
-	    -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
-	`; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-gif2h5$(EXEEXT): $(gif2h5_OBJECTS) $(gif2h5_DEPENDENCIES) $(EXTRA_gif2h5_DEPENDENCIES) 
-	@rm -f gif2h5$(EXEEXT)
-	$(AM_V_CCLD)$(gif2h5_LINK) $(gif2h5_OBJECTS) $(gif2h5_LDADD) $(LIBS)
-
-h52gif$(EXEEXT): $(h52gif_OBJECTS) $(h52gif_DEPENDENCIES) $(EXTRA_h52gif_DEPENDENCIES) 
-	@rm -f h52gif$(EXEEXT)
-	$(AM_V_CCLD)$(h52gif_LINK) $(h52gif_OBJECTS) $(h52gif_LDADD) $(LIBS)
-
-h52gifgentst$(EXEEXT): $(h52gifgentst_OBJECTS) $(h52gifgentst_DEPENDENCIES) $(EXTRA_h52gifgentst_DEPENDENCIES) 
-	@rm -f h52gifgentst$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(h52gifgentst_OBJECTS) $(h52gifgentst_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/decompress.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gif2hdf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gif2mem.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gifread.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h52gifgentst.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hdf2gif.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hdfgifwr.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/writehdf.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_SCRIPTS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_SCRIPTS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool \
-	clean-noinstPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-binPROGRAMS clean-generic clean-libtool \
-	clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-binPROGRAMS install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/hl/tools/gif2h5/hdf2gif.c b/hl/tools/gif2h5/hdf2gif.c
index 5c342ba..e03d5c4 100644
--- a/hl/tools/gif2h5/hdf2gif.c
+++ b/hl/tools/gif2h5/hdf2gif.c
@@ -64,7 +64,7 @@ int main(int argc , char **argv)
     int   ColorMapSize, InitCodeSize, Background, BitsPerPixel;
     int   j,nc;
     int   i;
-    int   numcols;
+    int   numcols = 0;
 
     BYTE pc2nc[256] , r1[256] , g1[256] , b1[256];
 
diff --git a/m4/libtool.m4 b/m4/libtool.m4
deleted file mode 100644
index 44e0ecff..0000000
--- a/m4/libtool.m4
+++ /dev/null
@@ -1,7982 +0,0 @@
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-m4_define([_LT_COPYING], [dnl
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-])
-
-# serial 57 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-m4_defun([LT_PREREQ],
-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
-       [m4_default([$3],
-		   [m4_fatal([Libtool version $1 or higher is required],
-		             63)])],
-       [$2])])
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-m4_defun([_LT_CHECK_BUILDDIR],
-[case `pwd` in
-  *\ * | *\	*)
-    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
-esac
-])
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
-AC_BEFORE([$0], [LT_LANG])dnl
-AC_BEFORE([$0], [LT_OUTPUT])dnl
-AC_BEFORE([$0], [LTDL_INIT])dnl
-m4_require([_LT_CHECK_BUILDDIR])dnl
-
-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
-dnl unless we require an AC_DEFUNed macro:
-AC_REQUIRE([LTOPTIONS_VERSION])dnl
-AC_REQUIRE([LTSUGAR_VERSION])dnl
-AC_REQUIRE([LTVERSION_VERSION])dnl
-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
-m4_require([_LT_PROG_LTMAIN])dnl
-
-_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
-
-dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-_LT_SETUP
-
-# Only expand once:
-m4_define([LT_INIT])
-])# LT_INIT
-
-# Old names:
-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
-])
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-m4_defun([_LT_FILEUTILS_DEFAULTS],
-[: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-])# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-m4_defun([_LT_SETUP],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
-
-_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
-dnl
-_LT_DECL([], [host_alias], [0], [The host system])dnl
-_LT_DECL([], [host], [0])dnl
-_LT_DECL([], [host_os], [0])dnl
-dnl
-_LT_DECL([], [build_alias], [0], [The build system])dnl
-_LT_DECL([], [build], [0])dnl
-_LT_DECL([], [build_os], [0])dnl
-dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-test -z "$LN_S" && LN_S="ln -s"
-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
-dnl
-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
-dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
-m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_WITH_SYSROOT])dnl
-
-_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-])
-if test -n "${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-_LT_CHECK_OBJDIR
-
-m4_require([_LT_TAG_COMPILER])dnl
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    _LT_PATH_MAGIC
-  fi
-  ;;
-esac
-
-# Use C for the default configuration in the libtool script
-LT_SUPPORTED_TAG([CC])
-_LT_LANG_C_CONFIG
-_LT_LANG_DEFAULT_CONFIG
-_LT_CONFIG_COMMANDS
-])# _LT_SETUP
-
-
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
-[# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-])
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-m4_defun([_LT_PROG_LTMAIN],
-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
-])# _LT_PROG_LTMAIN
-
-
-## ------------------------------------- ##
-## Accumulate code for creating libtool. ##
-## ------------------------------------- ##
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL_INIT],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
-[_LT_CONFIG_LIBTOOL([$1])
-_LT_CONFIG_LIBTOOL_INIT([$2])
-])
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-m4_define([_LT_FORMAT_COMMENT],
-[m4_ifval([$1], [
-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
-              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-)])
-
-
-
-## ------------------------ ##
-## FIXME: Eliminate VARNAME ##
-## ------------------------ ##
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME.  Any other value will be used directly.
-m4_define([_LT_DECL],
-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
-    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
-	[m4_ifval([$1], [$1], [$2])])
-    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
-    m4_ifval([$4],
-	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
-    lt_dict_add_subkey([lt_decl_dict], [$2],
-	[tagged?], [m4_ifval([$5], [yes], [no])])])
-])
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_tag_varnames],
-[_lt_decl_filter([tagged?], [yes], $@)])
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-m4_define([_lt_decl_filter],
-[m4_case([$#],
-  [0], [m4_fatal([$0: too few arguments: $#])],
-  [1], [m4_fatal([$0: too few arguments: $#: $1])],
-  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
-  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
-  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-])
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-m4_define([lt_decl_quote_varnames],
-[_lt_decl_filter([value], [1], $@)])
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_dquote_varnames],
-[_lt_decl_filter([value], [2], $@)])
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_varnames_tagged],
-[m4_assert([$# <= 2])dnl
-_$0(m4_quote(m4_default([$1], [[, ]])),
-    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
-    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
-m4_define([_lt_decl_varnames_tagged],
-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_all_varnames],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
-     m4_if([$2], [],
-	   m4_quote(lt_decl_varnames),
-	m4_quote(m4_shift($@))))[]dnl
-])
-m4_define([_lt_decl_all_varnames],
-[lt_join($@, lt_decl_varnames_tagged([$1],
-			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-])
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'.  VARNAME
-# must have a single quote delimited value for this to work.
-m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly.  In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
-    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-m4_defun([_LT_LIBTOOL_TAGS],
-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
-])
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-#    # Some comment about what VAR is for.
-#    visible_name=$lt_internal_name
-m4_define([_LT_LIBTOOL_DECLARE],
-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
-					   [description])))[]dnl
-m4_pushdef([_libtool_name],
-    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
-    [0], [_libtool_name=[$]$1],
-    [1], [_libtool_name=$lt_[]$1],
-    [2], [_libtool_name=$lt_[]$1],
-    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-])
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-[m4_foreach([_lt_var],
-    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-m4_define([_LT_LIBTOOL_TAG_VARS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'.  Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-m4_defun([_LT_CONFIG_COMMANDS],
-[AC_PROVIDE_IFELSE([LT_OUTPUT],
-	dnl If the libtool generation code has been placed in $CONFIG_LT,
-	dnl instead of duplicating it all over again into config.status,
-	dnl then we will have config.status run $CONFIG_LT later, so it
-	dnl needs to know what name is stored there:
-        [AC_CONFIG_COMMANDS([libtool],
-            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
-    dnl If the libtool generation code is destined for config.status,
-    dnl expand the accumulated commands and init code now:
-    [AC_CONFIG_COMMANDS([libtool],
-        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-])#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-[
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-_LT_CONFIG_STATUS_DECLARATIONS
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$[]1
-_LTECHO_EOF'
-}
-
-# Quote evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-_LT_OUTPUT_LIBTOOL_INIT
-])
-
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable.  If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins.  After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script.  The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-m4_ifdef([AS_INIT_GENERATED],
-[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
-[m4_defun([_LT_GENERATED_FILE_INIT],
-[m4_require([AS_PREPARE])]dnl
-[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
-[lt_write_fail=0
-cat >$1 <<_ASEOF || lt_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-$2
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$1 <<\_ASEOF || lt_write_fail=1
-AS_SHELL_SANITIZE
-_AS_PREPARE
-exec AS_MESSAGE_FD>&1
-_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
-m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-AC_DEFUN([LT_OUTPUT],
-[: ${CONFIG_LT=./config.lt}
-AC_MSG_NOTICE([creating $CONFIG_LT])
-_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
-[# Run this file to recreate a libtool stub with the current configuration.])
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-lt_cl_silent=false
-exec AS_MESSAGE_LOG_FD>>config.log
-{
-  echo
-  AS_BOX([Running $as_me.])
-} >&AS_MESSAGE_LOG_FD
-
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
-
-Usage: $[0] [[OPTIONS]]
-
-  -h, --help      print this help, then exit
-  -V, --version   print version number, then exit
-  -q, --quiet     do not print progress messages
-  -d, --debug     don't remove temporary files
-
-Report bugs to <bug-libtool@gnu.org>."
-
-lt_cl_version="\
-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-configured by $[0], generated by m4_PACKAGE_STRING.
-
-Copyright (C) 2011 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
-
-while test $[#] != 0
-do
-  case $[1] in
-    --version | --v* | -V )
-      echo "$lt_cl_version"; exit 0 ;;
-    --help | --h* | -h )
-      echo "$lt_cl_help"; exit 0 ;;
-    --debug | --d* | -d )
-      debug=: ;;
-    --quiet | --q* | --silent | --s* | -q )
-      lt_cl_silent=: ;;
-
-    -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
-
-    *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
-  esac
-  shift
-done
-
-if $lt_cl_silent; then
-  exec AS_MESSAGE_FD>/dev/null
-fi
-_LTEOF
-
-cat >>"$CONFIG_LT" <<_LTEOF
-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AC_MSG_NOTICE([creating $ofile])
-_LT_OUTPUT_LIBTOOL_COMMANDS
-AS_EXIT(0)
-_LTEOF
-chmod +x "$CONFIG_LT"
-
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure.  Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-lt_cl_success=:
-test "$silent" = yes &&
-  lt_config_lt_args="$lt_config_lt_args --quiet"
-exec AS_MESSAGE_LOG_FD>/dev/null
-$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-exec AS_MESSAGE_LOG_FD>>config.log
-$lt_cl_success || AS_EXIT(1)
-])# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars.  Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-m4_defun([_LT_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_CONFIG_SAVE_COMMANDS([
-  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
-  m4_if(_LT_TAG, [C], [
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-_LT_COPYING
-_LT_LIBTOOL_TAGS
-
-# ### BEGIN LIBTOOL CONFIG
-_LT_LIBTOOL_CONFIG_VARS
-_LT_LIBTOOL_TAG_VARS
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-  _LT_PROG_LTMAIN
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" \
-     || (rm -f "$cfgfile"; exit 1)
-
-  _LT_PROG_REPLACE_SHELLFNS
-
-   mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-],
-[cat <<_LT_EOF >> "$ofile"
-
-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-dnl in a comment (ie after a #).
-# ### BEGIN LIBTOOL TAG CONFIG: $1
-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-# ### END LIBTOOL TAG CONFIG: $1
-_LT_EOF
-])dnl /m4_if
-],
-[m4_if([$1], [], [
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'], [])
-])dnl /_LT_CONFIG_SAVE_COMMANDS
-])# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
-AC_DEFUN([LT_SUPPORTED_TAG], [])
-
-
-# C support is built-in for now
-m4_define([_LT_LANG_C_enabled], [])
-m4_define([_LT_TAGS], [])
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-AC_DEFUN([LT_LANG],
-[AC_BEFORE([$0], [LT_OUTPUT])dnl
-m4_case([$1],
-  [C],			[_LT_LANG(C)],
-  [C++],		[_LT_LANG(CXX)],
-  [Go],			[_LT_LANG(GO)],
-  [Java],		[_LT_LANG(GCJ)],
-  [Fortran 77],		[_LT_LANG(F77)],
-  [Fortran],		[_LT_LANG(FC)],
-  [Windows Resource],	[_LT_LANG(RC)],
-  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
-    [_LT_LANG($1)],
-    [m4_fatal([$0: unsupported language: "$1"])])])dnl
-])# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-m4_defun([_LT_LANG],
-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
-  [LT_SUPPORTED_TAG([$1])dnl
-  m4_append([_LT_TAGS], [$1 ])dnl
-  m4_define([_LT_LANG_]$1[_enabled], [])dnl
-  _LT_LANG_$1_CONFIG($1)])dnl
-])# _LT_LANG
-
-
-m4_ifndef([AC_PROG_GO], [
-############################################################
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-############################################################
-m4_defun([AC_PROG_GO],
-[AC_LANG_PUSH(Go)dnl
-AC_ARG_VAR([GOC],     [Go compiler command])dnl
-AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
-_AC_ARG_VAR_LDFLAGS()dnl
-AC_CHECK_TOOL(GOC, gccgo)
-if test -z "$GOC"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
-  fi
-fi
-if test -z "$GOC"; then
-  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
-fi
-])#m4_defun
-])#m4_ifndef
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-m4_defun([_LT_LANG_DEFAULT_CONFIG],
-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
-  [LT_LANG(CXX)],
-  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_F77],
-  [LT_LANG(F77)],
-  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_FC],
-  [LT_LANG(FC)],
-  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
-
-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
-dnl pulling things in needlessly.
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-  [LT_LANG(GCJ)],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-    [LT_LANG(GCJ)],
-    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
-      [LT_LANG(GCJ)],
-      [m4_ifdef([AC_PROG_GCJ],
-	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([A][M_PROG_GCJ],
-	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([LT_PROG_GCJ],
-	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
-
-AC_PROVIDE_IFELSE([AC_PROG_GO],
-  [LT_LANG(GO)],
-  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
-
-AC_PROVIDE_IFELSE([LT_PROG_RC],
-  [LT_LANG(RC)],
-  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
-])# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-dnl AC_DEFUN([AC_LIBTOOL_RC], [])
-
-
-# _LT_TAG_COMPILER
-# ----------------
-m4_defun([_LT_TAG_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-m4_defun([_LT_COMPILER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-m4_defun([_LT_LINKER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
-  case $host_os in
-    rhapsody* | darwin*)
-    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
-    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-    AC_CHECK_TOOL([LIPO], [lipo], [:])
-    AC_CHECK_TOOL([OTOOL], [otool], [:])
-    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
-    _LT_DECL([], [DSYMUTIL], [1],
-      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
-    _LT_DECL([], [NMEDIT], [1],
-      [Tool to change global to local symbols on Mac OS X])
-    _LT_DECL([], [LIPO], [1],
-      [Tool to manipulate fat objects and archives on Mac OS X])
-    _LT_DECL([], [OTOOL], [1],
-      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
-    _LT_DECL([], [OTOOL64], [1],
-      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
-
-    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
-      [lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-	# By default we will add the -single_module flag. You can override
-	# by either setting the environment variable LT_MULTI_MODULE
-	# non-empty at configure time, or by adding -multi_module to the
-	# link flags.
-	rm -rf libconftest.dylib*
-	echo "int foo(void){return 1;}" > conftest.c
-	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
-	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-        _lt_result=$?
-	# If there is a non-empty error log, and "single_module"
-	# appears in it, assume the flag caused a linker warning
-        if test -s conftest.err && $GREP single_module conftest.err; then
-	  cat conftest.err >&AS_MESSAGE_LOG_FD
-	# Otherwise, if the output was created with a 0 exit code from
-	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
-	  lt_cv_apple_cc_single_mod=yes
-	else
-	  cat conftest.err >&AS_MESSAGE_LOG_FD
-	fi
-	rm -rf libconftest.dylib*
-	rm -f conftest.*
-      fi])
-
-    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
-      [lt_cv_ld_exported_symbols_list],
-      [lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-	[lt_cv_ld_exported_symbols_list=yes],
-	[lt_cv_ld_exported_symbols_list=no])
-	LDFLAGS="$save_LDFLAGS"
-    ])
-
-    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
-      [lt_cv_ld_force_load=no
-      cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
-      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
-      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
-      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
-      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
-      cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
-      _lt_result=$?
-      if test -s conftest.err && $GREP force_load conftest.err; then
-	cat conftest.err >&AS_MESSAGE_LOG_FD
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
-	lt_cv_ld_force_load=yes
-      else
-	cat conftest.err >&AS_MESSAGE_LOG_FD
-      fi
-        rm -f conftest.err libconftest.a conftest conftest.c
-        rm -rf conftest.dSYM
-    ])
-    case $host_os in
-    rhapsody* | darwin1.[[012]])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[[012]]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
-      _lt_dsymutil='~$DSYMUTIL $lib || :'
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-])
-
-
-# _LT_DARWIN_LINKER_FEATURES([TAG])
-# ---------------------------------
-# Checks for linker and compiler features on darwin
-m4_defun([_LT_DARWIN_LINKER_FEATURES],
-[
-  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_automatic, $1)=yes
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
-                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
-  else
-    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-  fi
-  _LT_TAGVAR(link_all_deplibs, $1)=yes
-  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-  case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
-     *) _lt_dar_can_shared=$GCC ;;
-  esac
-  if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=func_echo_all
-    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    m4_if([$1], [CXX],
-[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-    fi
-],[])
-  else
-  _LT_TAGVAR(ld_shlibs, $1)=no
-  fi
-])
-
-# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
-# ----------------------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-# Store the results from the different compilers for each TAGNAME.
-# Allow to override them for all tags through lt_cv_aix_libpath.
-m4_defun([_LT_SYS_MODULE_PATH_AIX],
-[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
-  aix_libpath=$lt_cv_aix_libpath
-else
-  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
-  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
-  lt_aix_libpath_sed='[
-      /Import File Strings/,/^$/ {
-	  /^0/ {
-	      s/^0  *\([^ ]*\) *$/\1/
-	      p
-	  }
-      }]'
-  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  # Check for a 64-bit object if we didn't find anything.
-  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  fi],[])
-  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
-  fi
-  ])
-  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
-fi
-])# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-m4_define([_LT_SHELL_INIT],
-[m4_divert_text([M4SH-INIT], [$1
-])])# _LT_SHELL_INIT
-
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
-m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-AC_MSG_CHECKING([how to print strings])
-# Test print first, because it will be a builtin if present.
-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
-   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='printf %s\n'
-else
-  # Use this function as a fallback that always works.
-  func_fallback_echo ()
-  {
-    eval 'cat <<_LTECHO_EOF
-$[]1
-_LTECHO_EOF'
-  }
-  ECHO='func_fallback_echo'
-fi
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*" 
-}
-
-case "$ECHO" in
-  printf*) AC_MSG_RESULT([printf]) ;;
-  print*) AC_MSG_RESULT([print -r]) ;;
-  *) AC_MSG_RESULT([cat]) ;;
-esac
-
-m4_ifdef([_AS_DETECT_SUGGESTED],
-[_AS_DETECT_SUGGESTED([
-  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
-    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-    PATH=/empty FPATH=/empty; export PATH FPATH
-    test "X`printf %s $ECHO`" = "X$ECHO" \
-      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
-
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_WITH_SYSROOT
-# ----------------
-AC_DEFUN([_LT_WITH_SYSROOT],
-[AC_MSG_CHECKING([for sysroot])
-AC_ARG_WITH([sysroot],
-[  --with-sysroot[=DIR] Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).],
-[], [with_sysroot=no])
-
-dnl lt_sysroot will always be passed unquoted.  We quote it here
-dnl in case the user passed a directory name.
-lt_sysroot=
-case ${with_sysroot} in #(
- yes)
-   if test "$GCC" = yes; then
-     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-   fi
-   ;; #(
- /*)
-   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
-   ;; #(
- no|'')
-   ;; #(
- *)
-   AC_MSG_RESULT([${with_sysroot}])
-   AC_MSG_ERROR([The sysroot must be an absolute path.])
-   ;;
-esac
-
- AC_MSG_RESULT([${lt_sysroot:-no}])
-_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
-
-# _LT_ENABLE_LOCK
-# ---------------
-m4_defun([_LT_ENABLE_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-  [AS_HELP_STRING([--disable-libtool-lock],
-    [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-      *ELF-32*)
-	HPUX_IA64_MODE="32"
-	;;
-      *ELF-64*)
-	HPUX_IA64_MODE="64"
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -melf32bsmip"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -melf32bmipn32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -melf64bmip"
-	;;
-      esac
-    else
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -32"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -n32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -64"
-	  ;;
-      esac
-    fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-      *32-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_i386_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
-	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
-	    LD="${LD-ld} -m elf32ppclinux"
-	    ;;
-	  s390x-*linux*)
-	    LD="${LD-ld} -m elf_s390"
-	    ;;
-	  sparc64-*linux*)
-	    LD="${LD-ld} -m elf32_sparc"
-	    ;;
-	esac
-	;;
-      *64-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_x86_64_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_x86_64"
-	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
-	    LD="${LD-ld} -m elf64ppc"
-	    ;;
-	  s390*-*linux*|s390*-*tpf*)
-	    LD="${LD-ld} -m elf64_s390"
-	    ;;
-	  sparc*-*linux*)
-	    LD="${LD-ld} -m elf64_sparc"
-	    ;;
-	esac
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*)
-        case $host in
-        i?86-*-solaris*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        sparc*-*-solaris*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-        esac
-        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
-        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
-        fi
-        ;;
-      *)
-	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-	  LD="${LD-ld} -64"
-	fi
-	;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-esac
-
-need_locks="$enable_libtool_lock"
-])# _LT_ENABLE_LOCK
-
-
-# _LT_PROG_AR
-# -----------
-m4_defun([_LT_PROG_AR],
-[AC_CHECK_TOOLS(AR, [ar], false)
-: ${AR=ar}
-: ${AR_FLAGS=cru}
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
-
-AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
-  [lt_cv_ar_at_file=no
-   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
-     [echo conftest.$ac_objext > conftest.lst
-      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
-      AC_TRY_EVAL([lt_ar_try])
-      if test "$ac_status" -eq 0; then
-	# Ensure the archiver fails upon bogus file names.
-	rm -f conftest.$ac_objext libconftest.a
-	AC_TRY_EVAL([lt_ar_try])
-	if test "$ac_status" -ne 0; then
-          lt_cv_ar_at_file=@
-        fi
-      fi
-      rm -f conftest.* libconftest.a
-     ])
-  ])
-
-if test "x$lt_cv_ar_at_file" = xno; then
-  archiver_list_spec=
-else
-  archiver_list_spec=$lt_cv_ar_at_file
-fi
-_LT_DECL([], [archiver_list_spec], [1],
-  [How to feed a file listing to the archiver])
-])# _LT_PROG_AR
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-m4_defun([_LT_CMD_OLD_ARCHIVE],
-[_LT_PROG_AR
-
-AC_CHECK_TOOL(STRIP, strip, :)
-test -z "$STRIP" && STRIP=:
-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-test -z "$RANLIB" && RANLIB=:
-_LT_DECL([], [RANLIB], [1],
-    [Commands used to install an old-style archive])
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
-fi
-
-case $host_os in
-  darwin*)
-    lock_old_archive_extraction=yes ;;
-  *)
-    lock_old_archive_extraction=no ;;
-esac
-_LT_DECL([], [old_postinstall_cmds], [2])
-_LT_DECL([], [old_postuninstall_cmds], [2])
-_LT_TAGDECL([], [old_archive_cmds], [2],
-    [Commands used to build an old-style archive])
-_LT_DECL([], [lock_old_archive_extraction], [0],
-    [Whether to use a lock for old archive extraction])
-])# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([_LT_COMPILER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       $2=yes
-     fi
-   fi
-   $RM conftest*
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$5], , :, [$5])
-else
-    m4_if([$6], , :, [$6])
-fi
-])# _LT_COMPILER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                  [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-AC_DEFUN([_LT_LINKER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         $2=yes
-       fi
-     else
-       $2=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$4], , :, [$4])
-else
-    m4_if([$5], , :, [$5])
-fi
-])# _LT_LINKER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-
-
-# LT_CMD_MAX_LEN
-#---------------
-AC_DEFUN([LT_CMD_MAX_LEN],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw* | cegcc*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  mint*)
-    # On MiNT this can take a long time and run out of memory.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  os2*)
-    # The test takes a long time on OS/2.
-    lt_cv_sys_max_cmd_len=8192
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      # Make teststring a little bigger before we do anything with it.
-      # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
-        teststring=$teststring$teststring
-      done
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      # If test is not a shell built-in, we'll probably end up computing a
-      # maximum length that is only half of the actual maximum length, but
-      # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
-	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      # Only check the string length outside the loop.
-      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on
-      # massive amounts of additional arguments before passing them to the
-      # linker.  It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-_LT_DECL([], [max_cmd_len], [0],
-    [What is the maximum length of a command?])
-])# LT_CMD_MAX_LEN
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-m4_defun([_LT_HEADER_DLFCN],
-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
-])# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-m4_defun([_LT_TRY_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-[#line $LINENO "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}]
-_LT_EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_dlunknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-AC_DEFUN([LT_SYS_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-    ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-    ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ])
-    ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-	  lt_cv_dlopen_self_static, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-_LT_DECL([dlopen_support], [enable_dlopen], [0],
-	 [Whether dlopen is supported])
-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
-	 [Whether dlopen of programs is supported])
-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
-	 [Whether dlopen of statically linked programs is supported])
-])# LT_SYS_DLOPEN_SELF
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-m4_defun([_LT_COMPILER_C_O],
-[m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-])
-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
-	[Does compiler simultaneously support -c and -o options?])
-])# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-m4_defun([_LT_COMPILER_FILE_LOCKS],
-[m4_require([_LT_ENABLE_LOCK])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_COMPILER_C_O([$1])
-
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $RM conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
-])# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-m4_defun([_LT_CHECK_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-_LT_DECL([], [objdir], [0],
-         [The name of the directory that contains temporary libtool files])dnl
-m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
-  [Define to the sub-directory in which libtool stores uninstalled libraries.])
-])# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
-   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
-   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
-  # We can hardcode non-existent directories.
-  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
-   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-_LT_TAGDECL([], [hardcode_action], [0],
-    [How to hardcode a shared library path into an executable])
-])# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-m4_defun([_LT_CMD_STRIPLIB],
-[m4_require([_LT_DECL_EGREP])
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP" ; then
-      striplib="$STRIP -x"
-      old_striplib="$STRIP -S"
-      AC_MSG_RESULT([yes])
-    else
-      AC_MSG_RESULT([no])
-    fi
-    ;;
-  *)
-    AC_MSG_RESULT([no])
-    ;;
-  esac
-fi
-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
-_LT_DECL([], [striplib], [1])
-])# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-m4_defun([_LT_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_OBJDUMP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-m4_if([$1],
-	[], [
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
-  case $lt_search_path_spec in
-  *\;*)
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
-    ;;
-  *)
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
-    ;;
-  esac
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
-  # AWK program above erroneously prepends '/' to C:/dos/paths
-  # for these hosts.
-  case $host_os in
-    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
-  esac
-  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[[4-9]]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  case $host_cpu in
-  powerpc)
-    # Since July 2007 AmigaOS4 officially supports .so libraries.
-    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    ;;
-  m68k)
-    library_names_spec='$libname.ixlibrary $libname.a'
-    # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-    ;;
-  esac
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[[45]]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$cc_basename in
-  yes,*)
-    # gcc
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname~
-      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-      fi'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-m4_if([$1], [],[
-      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
-      ;;
-    mingw* | cegcc*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    dynamic_linker='Win32 ld.exe'
-    ;;
-
-  *,cl*)
-    # Native MSVC
-    libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
-
-    case $build_os in
-    mingw*)
-      sys_lib_search_path_spec=
-      lt_save_ifs=$IFS
-      IFS=';'
-      for lt_path in $LIB
-      do
-        IFS=$lt_save_ifs
-        # Let DOS variable expansion print the short 8.3 style file name.
-        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-      done
-      IFS=$lt_save_ifs
-      # Convert to MSYS style.
-      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
-      ;;
-    cygwin*)
-      # Convert to unix form, then to dos form, then back to unix form
-      # but this time dos style (no spaces!) so that the unix form looks
-      # like /cygdrive/c/PROGRA~1:/cygdr...
-      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-      ;;
-    *)
-      sys_lib_search_path_spec="$LIB"
-      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      # FIXME: find the short name or the path components, as spaces are
-      # common. (e.g. "Program Files" -> "PROGRA~1")
-      ;;
-    esac
-
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-    dynamic_linker='Win32 link.exe'
-    ;;
-
-  *)
-    # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    dynamic_linker='Win32 ld.exe'
-    ;;
-  esac
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[[23]].*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2.*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-haiku*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  hppa*64*)
-    shrext_cmds='.sl'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
-  postinstall_cmds='chmod 555 $lib'
-  # or fails outright, so override atomically:
-  install_override_mode=555
-  ;;
-
-interix[[3-9]]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux # correct to gnu/linux during the next big refactor
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-
-  # Some binutils ld are patched to set DT_RUNPATH
-  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
-    [lt_cv_shlibpath_overrides_runpath=no
-    save_LDFLAGS=$LDFLAGS
-    save_libdir=$libdir
-    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-	 [lt_cv_shlibpath_overrides_runpath=yes])])
-    LDFLAGS=$save_LDFLAGS
-    libdir=$save_libdir
-    ])
-  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
-
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-*nto* | *qnx*)
-  version_type=qnx
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='ldqnx.so'
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-tpf*)
-  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-uts4*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-_LT_DECL([], [variables_saved_for_relink], [1],
-    [Variables whose values should be saved in libtool wrapper scripts and
-    restored at link time])
-_LT_DECL([], [need_lib_prefix], [0],
-    [Do we need the "lib" prefix for modules?])
-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
-_LT_DECL([], [version_type], [0], [Library versioning type])
-_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
-_LT_DECL([], [shlibpath_overrides_runpath], [0],
-    [Is shlibpath searched before the hard-coded library search path?])
-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
-_LT_DECL([], [library_names_spec], [1],
-    [[List of archive names.  First name is the real one, the rest are links.
-    The last name is the one that the linker finds with -lNAME]])
-_LT_DECL([], [soname_spec], [1],
-    [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [install_override_mode], [1],
-    [Permission mode override for installation of shared libraries])
-_LT_DECL([], [postinstall_cmds], [2],
-    [Command to use after installation of a shared archive])
-_LT_DECL([], [postuninstall_cmds], [2],
-    [Command to use after uninstallation of a shared archive])
-_LT_DECL([], [finish_cmds], [2],
-    [Commands used to finish a libtool library installation in a directory])
-_LT_DECL([], [finish_eval], [1],
-    [[As "finish_cmds", except a single script fragment to be evaled but
-    not shown]])
-_LT_DECL([], [hardcode_into_libs], [0],
-    [Whether we should hardcode library paths into libraries])
-_LT_DECL([], [sys_lib_search_path_spec], [2],
-    [Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
-    [Run-time system search path for libraries])
-])# _LT_SYS_DYNAMIC_LINKER
-
-
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
-[m4_require([_LT_DECL_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="m4_if([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-_LT_DECL([], [MAGIC_CMD], [0],
-	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
-])# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-m4_defun([_LT_PATH_MAGIC],
-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# _LT_PATH_MAGIC
-
-
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([LT_PATH_LD],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
-
-AC_ARG_WITH([gnu-ld],
-    [AS_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])dnl
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by $CC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-_LT_PATH_LD_GNU
-AC_SUBST([LD])
-
-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
-])# LT_PATH_LD
-
-# Old names:
-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_LD], [])
-dnl AC_DEFUN([AC_PROG_LD], [])
-
-
-# _LT_PATH_LD_GNU
-#- --------------
-m4_defun([_LT_PATH_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# _LT_PATH_LD_GNU
-
-
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-m4_defun([_LT_CMD_RELOAD],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
-      reload_cmds=false
-    fi
-    ;;
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_TAGDECL([], [reload_cmds], [2])dnl
-])# _LT_CMD_RELOAD
-
-
-# _LT_CHECK_MAGIC_METHOD
-# ----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_MAGIC_METHOD],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[[4-9]]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[[45]]*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    # Keep this pattern in sync with the one in func_win32_libid.
-    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-cegcc*)
-  # use the weaker test based on 'objdump'. See mingw*.
-  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-haiku*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-interix[[3-9]]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-*nto* | *qnx*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-tpf*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-
-file_magic_glob=
-want_nocaseglob=no
-if test "$build" = "$host"; then
-  case $host_os in
-  mingw* | pw32*)
-    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
-      want_nocaseglob=yes
-    else
-      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
-    fi
-    ;;
-  esac
-fi
-
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-_LT_DECL([], [deplibs_check_method], [1],
-    [Method to check whether dependent libraries are shared objects])
-_LT_DECL([], [file_magic_cmd], [1],
-    [Command to use when deplibs_check_method = "file_magic"])
-_LT_DECL([], [file_magic_glob], [1],
-    [How to find potential files when deplibs_check_method = "file_magic"])
-_LT_DECL([], [want_nocaseglob], [1],
-    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
-])# _LT_CHECK_MAGIC_METHOD
-
-
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-AC_DEFUN([LT_PATH_NM],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi])
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
-else
-  # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$DUMPBIN"; then :
-    # Let the user override the test.
-  else
-    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
-    *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
-      ;;
-    *)
-      DUMPBIN=:
-      ;;
-    esac
-  fi
-  AC_SUBST([DUMPBIN])
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
-  fi
-fi
-test -z "$NM" && NM=nm
-AC_SUBST([NM])
-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
-
-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
-  [lt_cv_nm_interface="BSD nm"
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$ac_compile" 2>conftest.err)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
-  cat conftest.out >&AS_MESSAGE_LOG_FD
-  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-    lt_cv_nm_interface="MS dumpbin"
-  fi
-  rm -f conftest*])
-])# LT_PATH_NM
-
-# Old names:
-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_NM], [])
-dnl AC_DEFUN([AC_PROG_NM], [])
-
-# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-# --------------------------------
-# how to determine the name of the shared library
-# associated with a specific link library.
-#  -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-m4_require([_LT_DECL_DLLTOOL])
-AC_CACHE_CHECK([how to associate runtime and link libraries],
-lt_cv_sharedlib_from_linklib_cmd,
-[lt_cv_sharedlib_from_linklib_cmd='unknown'
-
-case $host_os in
-cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
-  case `$DLLTOOL --help 2>&1` in
-  *--identify-strict*)
-    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
-    ;;
-  *)
-    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
-    ;;
-  esac
-  ;;
-*)
-  # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
-  ;;
-esac
-])
-sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-
-_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
-    [Command to associate shared and link libraries])
-])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-
-
-# _LT_PATH_MANIFEST_TOOL
-# ----------------------
-# locate the manifest tool
-m4_defun([_LT_PATH_MANIFEST_TOOL],
-[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
-test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
-  [lt_cv_path_mainfest_tool=no
-  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
-  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
-    lt_cv_path_mainfest_tool=yes
-  fi
-  rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
-  MANIFEST_TOOL=:
-fi
-_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
-])# _LT_PATH_MANIFEST_TOOL
-
-
-# LT_LIB_M
-# --------
-# check for math library
-AC_DEFUN([LT_LIB_M],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
-  # These system don't have libm, or don't need it
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
-  ;;
-esac
-AC_SUBST([LIBM])
-])# LT_LIB_M
-
-# Old name:
-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_CHECK_LIBM], [])
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-m4_defun([_LT_COMPILER_NO_RTTI],
-[m4_require([_LT_TAG_COMPILER])dnl
-
-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  case $cc_basename in
-  nvcc*)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
-  esac
-
-  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions], [],
-    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
-	[Compiler flag to turn off builtin functions])
-])# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32* | cegcc*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris*)
-  symcode='[[BDRT]]'
-  ;;
-sco3.2v5*)
-  symcode='[[DT]]'
-  ;;
-sysv4.2uw2*)
-  symcode='[[DT]]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[[ABDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
-    # Also find C++ and __fastcall symbols from MSVC++,
-    # which start with @ or ?.
-    lt_cv_sys_global_symbol_pipe="$AWK ['"\
-"     {last_section=section; section=\$ 3};"\
-"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
-"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-"     \$ 0!~/External *\|/{next};"\
-"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-"     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-"     ' prfx=^$ac_symprfx]"
-  else
-    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-  fi
-  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<_LT_EOF > conftest.$ac_ext
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
-   relocations are performed -- see ld's documentation on pseudo-relocs.  */
-# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data.  */
-# define LT@&t@_DLSYM_CONST
-#else
-# define LT@&t@_DLSYM_CONST const
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
-	  cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols.  */
-LT@&t@_DLSYM_CONST struct {
-  const char *name;
-  void       *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[[]] =
-{
-  { "@PROGRAM@", (void *) 0 },
-_LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-	  cat <<\_LT_EOF >> conftest.$ac_ext
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_globsym_save_LIBS=$LIBS
-	  lt_globsym_save_CFLAGS=$CFLAGS
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS=$lt_globsym_save_LIBS
-	  CFLAGS=$lt_globsym_save_CFLAGS
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-
-# Response file support.
-if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-  nm_file_list_spec='@'
-elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
-  nm_file_list_spec='@'
-fi
-
-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
-    [Take the output of nm and produce a listing of raw symbols and C names])
-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
-    [Transform the output of nm in a proper C declaration])
-_LT_DECL([global_symbol_to_c_name_address],
-    [lt_cv_sys_global_symbol_to_c_name_address], [1],
-    [Transform the output of nm in a C name address pair])
-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
-    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
-    [Transform the output of nm in a C name address pair when lib prefix is needed])
-_LT_DECL([], [nm_file_list_spec], [1],
-    [Specify filename containing input files for $NM])
-]) # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-m4_defun([_LT_COMPILER_PIC],
-[m4_require([_LT_TAG_COMPILER])dnl
-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_TAGVAR(lt_prog_compiler_static, $1)=
-
-m4_if([$1], [CXX], [
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-    *qnx* | *nto*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix[[4-9]]*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-      mingw* | cygwin* | os2* | pw32* | cegcc*)
-	# This hack is so that the source file can tell whether it is being
-	# built for inclusion in a dll (and should export symbols for example).
-	m4_if([$1], [GCJ], [],
-	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-	;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  ecpc* )
-	    # old Intel C++ for x86_64 which still supported -KPIC.
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  icpc* )
-	    # Intel C++, used to be incompatible with GCC.
-	    # ICC 10 doesn't accept -KPIC any more.
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
-	    # IBM XL 8.0, 9.0 on PPC and BlueGene
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      *qnx* | *nto*)
-        # QNX uses GNU C++, but need to define -shared option too, otherwise
-        # it will coredump.
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-        ;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC* | sunCC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
-
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	# +Z the default
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-
-    case $cc_basename in
-    nvcc*) # Cuda Compiler Driver 2.2
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
-      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
-      fi
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
-      case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
-      ecc*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # icc used to be incompatible with GCC.
-      # ICC 10 doesn't accept -KPIC any more.
-      icc* | ifort*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # Lahey Fortran 8.1.
-      lf95*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
-	;;
-      nagfor*)
-	# NAG Fortran compiler
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	;;
-      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      ccc*)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        # All Alpha code is PIC.
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-        ;;
-      xl* | bgxl* | bgf* | mpixl*)
-	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
-	  ;;
-	*Sun\ F* | *Sun*Fortran*)
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	  ;;
-	*Sun\ C*)
-	  # Sun C 5.9
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  ;;
-        *Intel*\ [[CF]]*Compiler*)
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	  ;;
-	*Portland\ Group*)
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  ;;
-	esac
-	;;
-      esac
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    rdos*)
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    unicos*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
-    ;;
-esac
-
-AC_CACHE_CHECK([for $compiler option to produce PIC],
-  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
-  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
-    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
-    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
-	[Additional compiler flags for building library objects])
-
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-	[How to pass a linker flag through the compiler])
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-  $lt_tmp_static_flag,
-  [],
-  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
-	[Compiler flag to prevent dynamic linking])
-])# _LT_COMPILER_PIC
-
-
-# _LT_LINKER_SHLIBS([TAGNAME])
-# ----------------------------
-# See if the linker supports building shared libraries.
-m4_defun([_LT_LINKER_SHLIBS],
-[AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-m4_if([$1], [CXX], [
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  case $host_os in
-  aix[[4-9]]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
-    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-    ;;
-  cygwin* | mingw* | cegcc*)
-    case $cc_basename in
-    cl*)
-      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
-      ;;
-    *)
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
-      ;;
-    esac
-    ;;
-  *)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-    ;;
-  esac
-], [
-  runpath_var=
-  _LT_TAGVAR(allow_undefined_flag, $1)=
-  _LT_TAGVAR(always_export_symbols, $1)=no
-  _LT_TAGVAR(archive_cmds, $1)=
-  _LT_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_TAGVAR(compiler_needs_object, $1)=no
-  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  _LT_TAGVAR(hardcode_automatic, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
-  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(inherit_rpath, $1)=no
-  _LT_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_TAGVAR(module_cmds, $1)=
-  _LT_TAGVAR(module_expsym_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  _LT_TAGVAR(ld_shlibs, $1)=yes
-
-  # On some targets, GNU ld is compatible enough with the native linker
-  # that we're better off using the native interface for both.
-  lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
-    case $host_os in
-      aix*)
-	# The AIX port of GNU ld has always aspired to compatibility
-	# with the native linker.  However, as the warning in the GNU ld
-	# block says, versions before 2.19.5* couldn't really create working
-	# shared libraries, regardless of the interface used.
-	case `$LD -v 2>&1` in
-	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
-	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
-	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
-	  *)
-	    lt_use_gnu_ld_interface=yes
-	    ;;
-	esac
-	;;
-      *)
-	lt_use_gnu_ld_interface=yes
-	;;
-    esac
-  fi
-
-  if test "$lt_use_gnu_ld_interface" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>&1` in
-      *GNU\ gold*) supports_anon_versioning=yes ;;
-      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[[3-9]]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.19, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
-
-_LT_EOF
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-      # as there is no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=no
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
-
-      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    haiku*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    interix[[3-9]]*)
-      _LT_TAGVAR(hardcode_direct, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-      tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
-	case $cc_basename in
-	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
-	esac
-      fi
-      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
-      then
-	tmp_addflag=' $pic_flag'
-	tmp_sharedflag='-shared'
-	case $cc_basename,$host_cpu in
-        pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95* | pgfortran*)
-					# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	lf95*)				# Lahey Fortran 8.1
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
-	  tmp_sharedflag='--shared' ;;
-	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
-	  tmp_sharedflag='-qmkshrobj'
-	  tmp_addflag= ;;
-	nvcc*)	# Cuda Compiler Driver 2.2
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  _LT_TAGVAR(compiler_needs_object, $1)=yes
-	  ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  _LT_TAGVAR(compiler_needs_object, $1)=yes
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	esac
-	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-        if test "x$supports_anon_versioning" = xyes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-        fi
-
-	case $cc_basename in
-	xlf* | bgf* | bgxlf* | mpixlf*)
-	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-	  fi
-	  ;;
-	esac
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  # For security reasons, it is highly recommended that you always
-	  # use absolute paths for naming shared libraries, and exclude the
-	  # DT_RUNPATH tag from executables and libraries.  But doing so
-	  # requires that you compile everything twice, which is a pain.
-	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  else
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-
-    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
-      runpath_var=
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
-
-    aix[[4-9]]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
-	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-	    aix_use_runtimelinking=yes
-	    break
-	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      _LT_TAGVAR(archive_cmds, $1)=''
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	  # We have reworked collect2
-	  :
-	  else
-	  # We have old collect2
-	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        _LT_SYS_MODULE_PATH_AIX([$1])
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-      else
-	if test "$host_cpu" = ia64; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an
-	 # empty executable.
-	 _LT_SYS_MODULE_PATH_AIX([$1])
-	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
-	    # We only use this code for GNU lds that support --whole-archive.
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	  else
-	    # Exported symbols can be pulled into shared objects from archives
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  fi
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    bsdi[[45]]*)
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      case $cc_basename in
-      cl*)
-	# Native MSVC
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	_LT_TAGVAR(always_export_symbols, $1)=yes
-	_LT_TAGVAR(file_list_spec, $1)='@'
-	# Tell ltmain to make .lib files, not .a files.
-	libext=lib
-	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
-	# FIXME: Setting linknames here is a bad hack.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
-	# The linker will not automatically build a static lib if we build a DLL.
-	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
-	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-	# Don't use ranlib
-	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
-	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
-	;;
-      *)
-	# Assume MSVC wrapper
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Tell ltmain to make .lib files, not .a files.
-	libext=lib
-	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
-	# FIXME: Setting linknames here is a bad hack.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-	# The linker will automatically build a .lib file if we build a DLL.
-	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-	# FIXME: Should let the user specify the lib program.
-	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-	;;
-      esac
-      ;;
-
-    darwin* | rhapsody*)
-      _LT_DARWIN_LINKER_FEATURES($1)
-      ;;
-
-    dgux*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2.*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_TAGVAR(hardcode_direct, $1)=yes
-	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	_LT_TAGVAR(hardcode_minus_L, $1)=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	m4_if($1, [], [
-	  # Older versions of the 11.00 compiler do not understand -b yet
-	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
-	  _LT_LINKER_OPTION([if $CC understands -b],
-	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
-	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
-	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
-	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  _LT_TAGVAR(hardcode_direct, $1)=no
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  ;;
-	*)
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	# Try to use the -exported_symbol ld option, if it does not
-	# work, assume that -exports_file does not work either and
-	# implicitly export all symbols.
-	# This should be the same for all languages, so no per-tag cache variable.
-	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
-	  [lt_cv_irix_exported_symbol],
-	  [save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-	   AC_LINK_IFELSE(
-	     [AC_LANG_SOURCE(
-	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
-			      [C++], [[int foo (void) { return 0; }]],
-			      [Fortran 77], [[
-      subroutine foo
-      end]],
-			      [Fortran], [[
-      subroutine foo
-      end]])])],
-	      [lt_cv_irix_exported_symbol=yes],
-	      [lt_cv_irix_exported_symbol=no])
-           LDFLAGS="$save_LDFLAGS"])
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-	fi
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(inherit_rpath, $1)=yes
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *nto* | *qnx*)
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	_LT_TAGVAR(hardcode_direct, $1)=yes
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	     ;;
-	   *)
-	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-	fi
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    os2*)
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-      else
-	case `$CC -V 2>&1` in
-	*"Compilers 5.0"*)
-	  wlarc=''
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-	  ;;
-	*)
-	  wlarc='${wl}'
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-	  ;;
-	esac
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
-	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_TAGVAR(hardcode_direct, $1)=no
-        ;;
-	motorola)
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4.3*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    esac
-
-    if test x$host_vendor = xsni; then
-      case $host in
-      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
-	;;
-      esac
-    fi
-  fi
-])
-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
-
-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
-_LT_DECL([], [extract_expsyms_cmds], [2],
-    [The commands to extract the exported symbol list from a shared archive])
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
-  # Assume -lc should be added
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_TAGVAR(archive_cmds, $1) in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
-	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
-	[$RM conftest*
-	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-	  soname=conftest
-	  lib=conftest
-	  libobjs=conftest.$ac_objext
-	  deplibs=
-	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-	  compiler_flags=-v
-	  linker_flags=-v
-	  verstring=
-	  output_objdir=.
-	  libname=conftest
-	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-	  _LT_TAGVAR(allow_undefined_flag, $1)=
-	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-	  then
-	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	  else
-	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  fi
-	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-	else
-	  cat conftest.err 1>&5
-	fi
-	$RM conftest*
-	])
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
-    [Whether or not to add -lc for building shared libraries])
-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
-    [enable_shared_with_static_runtimes], [0],
-    [Whether or not to disallow shared libs when runtime libs are static])
-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
-    [Compiler flag to allow reflexive dlopens])
-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
-    [Compiler flag to generate shared objects directly from archives])
-_LT_TAGDECL([], [compiler_needs_object], [1],
-    [Whether the compiler copes with passing no objects directly])
-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
-    [Create an old-style archive from a shared archive])
-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
-    [Create a temporary old-style archive to link instead of a shared archive])
-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
-_LT_TAGDECL([], [archive_expsym_cmds], [2])
-_LT_TAGDECL([], [module_cmds], [2],
-    [Commands used to build a loadable module if different from building
-    a shared archive.])
-_LT_TAGDECL([], [module_expsym_cmds], [2])
-_LT_TAGDECL([], [with_gnu_ld], [1],
-    [Whether we are building with GNU ld or not])
-_LT_TAGDECL([], [allow_undefined_flag], [1],
-    [Flag that allows shared libraries with undefined symbols to be built])
-_LT_TAGDECL([], [no_undefined_flag], [1],
-    [Flag that enforces no undefined symbols])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
-    [Flag to hardcode $libdir into a binary during linking.
-    This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
-    [Whether we need a single "-rpath" flag with a separated argument])
-_LT_TAGDECL([], [hardcode_direct], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary])
-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary and the resulting library dependency is
-    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
-    library is relocated])
-_LT_TAGDECL([], [hardcode_minus_L], [0],
-    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
-    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_automatic], [0],
-    [Set to "yes" if building a shared library automatically hardcodes DIR
-    into the library and all subsequent libraries and executables linked
-    against it])
-_LT_TAGDECL([], [inherit_rpath], [0],
-    [Set to yes if linker adds runtime paths of dependent libraries
-    to runtime path list])
-_LT_TAGDECL([], [link_all_deplibs], [0],
-    [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [always_export_symbols], [0],
-    [Set to "yes" if exported symbols are required])
-_LT_TAGDECL([], [export_symbols_cmds], [2],
-    [The commands to list exported symbols])
-_LT_TAGDECL([], [exclude_expsyms], [1],
-    [Symbols that should not be listed in the preloaded symbols])
-_LT_TAGDECL([], [include_expsyms], [1],
-    [Symbols that must always be exported])
-_LT_TAGDECL([], [prelink_cmds], [2],
-    [Commands necessary for linking programs (against libraries) with templates])
-_LT_TAGDECL([], [postlink_cmds], [2],
-    [Commands necessary for finishing linking programs])
-_LT_TAGDECL([], [file_list_spec], [1],
-    [Specify filename containing input files])
-dnl FIXME: Not yet implemented
-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
-dnl    [Compiler flag to generate thread safe objects])
-])# _LT_LINKER_SHLIBS
-
-
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_C_CONFIG],
-[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_TAG_COMPILER
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_SYS_DYNAMIC_LINKER($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-  LT_SYS_DLOPEN_SELF
-  _LT_CMD_STRIPLIB
-
-  # Report which library types will actually be built
-  AC_MSG_CHECKING([if libtool supports shared libraries])
-  AC_MSG_RESULT([$can_build_shared])
-
-  AC_MSG_CHECKING([whether to build shared libraries])
-  test "$can_build_shared" = "no" && enable_shared=no
-
-  # On AIX, shared libraries and static libraries use the same namespace, and
-  # are all built from PIC.
-  case $host_os in
-  aix3*)
-    test "$enable_shared" = yes && enable_static=no
-    if test -n "$RANLIB"; then
-      archive_cmds="$archive_cmds~\$RANLIB \$lib"
-      postinstall_cmds='$RANLIB $lib'
-    fi
-    ;;
-
-  aix[[4-9]]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
-    fi
-    ;;
-  esac
-  AC_MSG_RESULT([$enable_shared])
-
-  AC_MSG_CHECKING([whether to build static libraries])
-  # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
-  AC_MSG_RESULT([$enable_static])
-
-  _LT_CONFIG($1)
-fi
-AC_LANG_POP
-CC="$lt_save_CC"
-])# _LT_LANG_C_CONFIG
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-else
-  _lt_caught_CXX_error=yes
-fi
-
-AC_LANG_PUSH(C++)
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(compiler_needs_object, $1)=no
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the CXX compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="int some_variable = 0;"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC=$CC
-  lt_save_CFLAGS=$CFLAGS
-  lt_save_LD=$LD
-  lt_save_GCC=$GCC
-  GCC=$GXX
-  lt_save_with_gnu_ld=$with_gnu_ld
-  lt_save_path_LD=$lt_cv_path_LD
-  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-  else
-    $as_unset lt_cv_prog_gnu_ld
-  fi
-  if test -n "${lt_cv_path_LDCXX+set}"; then
-    lt_cv_path_LD=$lt_cv_path_LDCXX
-  else
-    $as_unset lt_cv_path_LD
-  fi
-  test -z "${LDCXX+set}" || LD=$LDCXX
-  CC=${CXX-"c++"}
-  CFLAGS=$CXXFLAGS
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    # We don't want -fno-exception when compiling C++ code, so set the
-    # no_builtin_flag separately
-    if test "$GXX" = yes; then
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-    else
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-    fi
-
-    if test "$GXX" = yes; then
-      # Set up default GNU C++ configuration
-
-      LT_PATH_LD
-
-      # Check if GNU C++ uses GNU ld as the underlying linker, since the
-      # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-        # If archive_cmds runs LD, not CC, wlarc should be empty
-        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-        #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
-
-        # ancient GNU ld didn't support --whole-archive et. al.
-        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
-	  $GREP 'no-whole-archive' > /dev/null; then
-          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-        else
-          _LT_TAGVAR(whole_archive_flag_spec, $1)=
-        fi
-      else
-        with_gnu_ld=no
-        wlarc=
-
-        # A generic and very simple default shared library creation
-        # command for GNU C++ for the case where it uses the native
-        # linker, instead of GNU ld.  If possible, this setting should
-        # overridden to take advantage of the native linker features on
-        # the platform it is being used on.
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      fi
-
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-
-    else
-      GXX=no
-      with_gnu_ld=no
-      wlarc=
-    fi
-
-    # PORTME: fill in a description of your system's C++ link characteristics
-    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-    _LT_TAGVAR(ld_shlibs, $1)=yes
-    case $host_os in
-      aix3*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-      aix[[4-9]]*)
-        if test "$host_cpu" = ia64; then
-          # On IA64, the linker does run time linking by default, so we don't
-          # have to do anything special.
-          aix_use_runtimelinking=no
-          exp_sym_flag='-Bexport'
-          no_entry_flag=""
-        else
-          aix_use_runtimelinking=no
-
-          # Test if we are trying to use run time linking or normal
-          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
-          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	    for ld_flag in $LDFLAGS; do
-	      case $ld_flag in
-	      *-brtl*)
-	        aix_use_runtimelinking=yes
-	        break
-	        ;;
-	      esac
-	    done
-	    ;;
-          esac
-
-          exp_sym_flag='-bexport'
-          no_entry_flag='-bnoentry'
-        fi
-
-        # When large executables or shared objects are built, AIX ld can
-        # have problems creating the table of contents.  If linking a library
-        # or program results in "error TOC overflow" add -mminimal-toc to
-        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-        _LT_TAGVAR(archive_cmds, $1)=''
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-        if test "$GXX" = yes; then
-          case $host_os in aix4.[[012]]|aix4.[[012]].*)
-          # We only want to do this on AIX 4.2 and lower, the check
-          # below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	    # We have reworked collect2
-	    :
-	  else
-	    # We have old collect2
-	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
-	    # It fails to find uninstalled libraries when the uninstalled
-	    # path is not listed in the libpath.  Setting hardcode_minus_L
-	    # to unsupported forces relinking
-	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-          esac
-          shared_flag='-shared'
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag="$shared_flag "'${wl}-G'
-	  fi
-        else
-          # not using gcc
-          if test "$host_cpu" = ia64; then
-	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	  # chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-          else
-	    if test "$aix_use_runtimelinking" = yes; then
-	      shared_flag='${wl}-G'
-	    else
-	      shared_flag='${wl}-bM:SRE'
-	    fi
-          fi
-        fi
-
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-        # It seems that -bexpall does not export symbols beginning with
-        # underscore (_), so it is better to generate a list of symbols to
-	# export.
-        _LT_TAGVAR(always_export_symbols, $1)=yes
-        if test "$aix_use_runtimelinking" = yes; then
-          # Warning - without using the other runtime loading flags (-brtl),
-          # -berok will link without error, but may produce a broken library.
-          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-          # Determine the default libpath from the value encoded in an empty
-          # executable.
-          _LT_SYS_MODULE_PATH_AIX([$1])
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-        else
-          if test "$host_cpu" = ia64; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-          else
-	    # Determine the default libpath from the value encoded in an
-	    # empty executable.
-	    _LT_SYS_MODULE_PATH_AIX([$1])
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	    # Warning - without using the other run time loading flags,
-	    # -berok will link without error, but may produce a broken library.
-	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    if test "$with_gnu_ld" = yes; then
-	      # We only use this code for GNU lds that support --whole-archive.
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	    else
-	      # Exported symbols can be pulled into shared objects from archives
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	    fi
-	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	    # This is similar to how AIX traditionally builds its shared
-	    # libraries.
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-          fi
-        fi
-        ;;
-
-      beos*)
-	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	  # support --undefined.  This deserves some investigation.  FIXME
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	else
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-
-      chorus*)
-        case $cc_basename in
-          *)
-	  # FIXME: insert proper C++ library support
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	  ;;
-        esac
-        ;;
-
-      cygwin* | mingw* | pw32* | cegcc*)
-	case $GXX,$cc_basename in
-	,cl* | no,cl*)
-	  # Native MSVC
-	  # hardcode_libdir_flag_spec is actually meaningless, as there is
-	  # no search path for DLLs.
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	  _LT_TAGVAR(always_export_symbols, $1)=yes
-	  _LT_TAGVAR(file_list_spec, $1)='@'
-	  # Tell ltmain to make .lib files, not .a files.
-	  libext=lib
-	  # Tell ltmain to make .dll files, not .so files.
-	  shrext_cmds=".dll"
-	  # FIXME: Setting linknames here is a bad hack.
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	    else
-	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	    fi~
-	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	    linknames='
-	  # The linker will not automatically build a static lib if we build a DLL.
-	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-	  # Don't use ranlib
-	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
-	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-	    lt_tool_outputfile="@TOOL_OUTPUT@"~
-	    case $lt_outputfile in
-	      *.exe|*.EXE) ;;
-	      *)
-		lt_outputfile="$lt_outputfile.exe"
-		lt_tool_outputfile="$lt_tool_outputfile.exe"
-		;;
-	    esac~
-	    func_to_tool_file "$lt_outputfile"~
-	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	      $RM "$lt_outputfile.manifest";
-	    fi'
-	  ;;
-	*)
-	  # g++
-	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-	  # as there is no search path for DLLs.
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
-	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	  _LT_TAGVAR(always_export_symbols, $1)=no
-	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	    # If the export-symbols file already is a .def file (1st line
-	    # is EXPORTS), use it as is; otherwise, prepend...
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      cp $export_symbols $output_objdir/$soname.def;
-	    else
-	      echo EXPORTS > $output_objdir/$soname.def;
-	      cat $export_symbols >> $output_objdir/$soname.def;
-	    fi~
-	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	  else
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	  fi
-	  ;;
-	esac
-	;;
-      darwin* | rhapsody*)
-        _LT_DARWIN_LINKER_FEATURES($1)
-	;;
-
-      dgux*)
-        case $cc_basename in
-          ec++*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          ghcx*)
-	    # Green Hills C++ Compiler
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      freebsd2.*)
-        # C++ shared libraries reported to be fairly broken before
-	# switch to ELF
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      freebsd-elf*)
-        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        ;;
-
-      freebsd* | dragonfly*)
-        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-        # conventions
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-        ;;
-
-      gnu*)
-        ;;
-
-      haiku*)
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        ;;
-
-      hpux9*)
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				             # but as the default
-				             # location of the library.
-
-        case $cc_basename in
-          CC*)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          aCC*)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            # Commands to make compiler produce verbose output that lists
-            # what "hidden" libraries, object files and flags are used when
-            # linking a shared library.
-            #
-            # There doesn't appear to be a way to prevent this compiler from
-            # explicitly linking system object files so we need to strip them
-            # from the output so that they don't get included in the library
-            # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-            ;;
-          *)
-            if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            else
-              # FIXME: insert proper C++ library support
-              _LT_TAGVAR(ld_shlibs, $1)=no
-            fi
-            ;;
-        esac
-        ;;
-
-      hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-          case $host_cpu in
-            hppa*64*|ia64*)
-              ;;
-            *)
-	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-              ;;
-          esac
-        fi
-        case $host_cpu in
-          hppa*64*|ia64*)
-            _LT_TAGVAR(hardcode_direct, $1)=no
-            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-            ;;
-          *)
-            _LT_TAGVAR(hardcode_direct, $1)=yes
-            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					         # but as the default
-					         # location of the library.
-            ;;
-        esac
-
-        case $cc_basename in
-          CC*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          aCC*)
-	    case $host_cpu in
-	      hppa*64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	      ia64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	      *)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	    esac
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-	    ;;
-          *)
-	    if test "$GXX" = yes; then
-	      if test $with_gnu_ld = no; then
-	        case $host_cpu in
-	          hppa*64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	          ia64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	          *)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	        esac
-	      fi
-	    else
-	      # FIXME: insert proper C++ library support
-	      _LT_TAGVAR(ld_shlibs, $1)=no
-	    fi
-	    ;;
-        esac
-        ;;
-
-      interix[[3-9]]*)
-	_LT_TAGVAR(hardcode_direct, $1)=no
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-	# Instead, shared libraries are loaded at an image base (0x10000000 by
-	# default) and relocated if they conflict, which is a slow very memory
-	# consuming and fragmenting process.  To avoid this, we pick a random,
-	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	;;
-      irix5* | irix6*)
-        case $cc_basename in
-          CC*)
-	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	    # necessary to make sure instantiated templates are included
-	    # in the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	    ;;
-          *)
-	    if test "$GXX" = yes; then
-	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
-	      fi
-	    fi
-	    _LT_TAGVAR(link_all_deplibs, $1)=yes
-	    ;;
-        esac
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(inherit_rpath, $1)=yes
-        ;;
-
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
-        case $cc_basename in
-          KCC*)
-	    # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	    # KCC will only create a shared library if the output file
-	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
-	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	    ;;
-	  icpc* | ecpc* )
-	    # Intel C++
-	    with_gnu_ld=yes
-	    # version 8.0 and above of icpc choke on multiply defined symbols
-	    # if we add $predep_objects and $postdep_objects, however 7.1 and
-	    # earlier do not add the objects themselves.
-	    case `$CC -V 2>&1` in
-	      *"Version 7."*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-		;;
-	      *)  # Version 8.0 or newer
-	        tmp_idyn=
-	        case $host_cpu in
-		  ia64*) tmp_idyn=' -i_dynamic';;
-		esac
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-		;;
-	    esac
-	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	    ;;
-          pgCC* | pgcpp*)
-            # Portland Group C++ compiler
-	    case `$CC -V` in
-	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
-	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
-	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
-		$RANLIB $oldlib'
-	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-	      ;;
-	    *) # Version 6 and above use weak symbols
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-	      ;;
-	    esac
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-            ;;
-	  cxx*)
-	    # Compaq C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	    runpath_var=LD_RUN_PATH
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
-	    ;;
-	  xl* | mpixl* | bgxl*)
-	    # IBM XL 8.0 on PPC, with GNU ld
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    if test "x$supports_anon_versioning" = xyes; then
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-		echo "local: *; };" >> $output_objdir/$libname.ver~
-		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	    fi
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	      _LT_TAGVAR(compiler_needs_object, $1)=yes
-
-	      # Not sure whether something based on
-	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	      # would be better.
-	      output_verbose_link_cmd='func_echo_all'
-
-	      # Archives containing C++ object files must be created using
-	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	      # necessary to make sure instantiated templates are included
-	      # in the archive.
-	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-
-      lynxos*)
-        # FIXME: insert proper C++ library support
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      m88k*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      mvs*)
-        case $cc_basename in
-          cxx*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-	  *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-	esac
-	;;
-
-      netbsd*)
-        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-	  wlarc=
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	fi
-	# Workaround some broken pre-1.5 toolchains
-	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-	;;
-
-      *nto* | *qnx*)
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-	;;
-
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      openbsd*)
-	if test -f /usr/libexec/ld.so; then
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-	  fi
-	  output_verbose_link_cmd=func_echo_all
-	else
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-
-      osf3* | osf4* | osf5*)
-        case $cc_basename in
-          KCC*)
-	    # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	    # KCC will only create a shared library if the output file
-	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
-	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Archives containing C++ object files must be created using
-	    # the KAI C++ compiler.
-	    case $host in
-	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
-	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
-	    esac
-	    ;;
-          RCC*)
-	    # Rational C++ 2.4.1
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          cxx*)
-	    case $host in
-	      osf3*)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-		;;
-	      *)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
-	          $RM $lib.exp'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-		;;
-	    esac
-
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-	    ;;
-	  *)
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	      case $host in
-	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-		  ;;
-	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-		  ;;
-	      esac
-
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	      # Commands to make compiler produce verbose output that lists
-	      # what "hidden" libraries, object files and flags are used when
-	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-
-	    else
-	      # FIXME: insert proper C++ library support
-	      _LT_TAGVAR(ld_shlibs, $1)=no
-	    fi
-	    ;;
-        esac
-        ;;
-
-      psos*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      sunos4*)
-        case $cc_basename in
-          CC*)
-	    # Sun C++ 4.x
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          lcc*)
-	    # Lucid
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      solaris*)
-        case $cc_basename in
-          CC* | sunCC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
-	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	    case $host_os in
-	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	      *)
-		# The compiler driver will combine and reorder linker options,
-		# but understands `-z linker_flag'.
-	        # Supported since Solaris 2.6 (maybe 2.5.1?)
-		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-	        ;;
-	    esac
-	    _LT_TAGVAR(link_all_deplibs, $1)=yes
-
-	    output_verbose_link_cmd='func_echo_all'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	    # necessary to make sure instantiated templates are included
-	    # in the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	    ;;
-          gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	    # The C++ compiler must be used to create the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	    ;;
-          *)
-	    # GNU C++ compiler with Solaris linker
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	        # Commands to make compiler produce verbose output that lists
-	        # what "hidden" libraries, object files and flags are used when
-	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-	      else
-	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	        # platform.
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	        # Commands to make compiler produce verbose output that lists
-	        # what "hidden" libraries, object files and flags are used when
-	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-	      fi
-
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	      case $host_os in
-		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-		*)
-		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-		  ;;
-	      esac
-	    fi
-	    ;;
-        esac
-        ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      case $cc_basename in
-        CC*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-      esac
-      ;;
-
-      sysv5* | sco3.2v5* | sco5v6*)
-	# Note: We can NOT use -z defs as we might desire, because we do not
-	# link with -lc, and that would cause any symbols used from libc to
-	# always be unresolved, which means just about no library would
-	# ever link correctly.  If we're not using GNU ld we use -z text
-	# though, which does catch some bad symbols but isn't as heavy-handed
-	# as -z defs.
-	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-	_LT_TAGVAR(link_all_deplibs, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-	runpath_var='LD_RUN_PATH'
-
-	case $cc_basename in
-          CC*)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
-	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
-	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
-	      '"$_LT_TAGVAR(reload_cmds, $1)"
-	    ;;
-	  *)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    ;;
-	esac
-      ;;
-
-      tandem*)
-        case $cc_basename in
-          NCC*)
-	    # NonStop-UX NCC 3.20
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      vxworks*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      *)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-    esac
-
-    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-    _LT_TAGVAR(GCC, $1)="$GXX"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  CC=$lt_save_CC
-  CFLAGS=$lt_save_CFLAGS
-  LDCXX=$LD
-  LD=$lt_save_LD
-  GCC=$lt_save_GCC
-  with_gnu_ld=$lt_save_with_gnu_ld
-  lt_cv_path_LDCXX=$lt_cv_path_LD
-  lt_cv_path_LD=$lt_save_path_LD
-  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
-
-AC_LANG_POP
-])# _LT_LANG_CXX_CONFIG
-
-
-# _LT_FUNC_STRIPNAME_CNF
-# ----------------------
-# func_stripname_cnf prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-#
-# This function is identical to the (non-XSI) version of func_stripname,
-# except this one can be used by m4 code that may be executed by configure,
-# rather than the libtool script.
-m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
-AC_REQUIRE([_LT_DECL_SED])
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
-func_stripname_cnf ()
-{
-  case ${2} in
-  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-  esac
-} # func_stripname_cnf
-])# _LT_FUNC_STRIPNAME_CNF
-
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
-# Dependencies to place before and after the object being linked:
-_LT_TAGVAR(predep_objects, $1)=
-_LT_TAGVAR(postdep_objects, $1)=
-_LT_TAGVAR(predeps, $1)=
-_LT_TAGVAR(postdeps, $1)=
-_LT_TAGVAR(compiler_lib_search_path, $1)=
-
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
-int a;
-void foo (void) { a = 0; }
-_LT_EOF
-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-_LT_EOF
-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-_LT_EOF
-], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
-package foo
-func foo() {
-}
-_LT_EOF
-])
-
-_lt_libdeps_save_CFLAGS=$CFLAGS
-case "$CC $CFLAGS " in #(
-*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
-*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
-*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
-esac
-
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  for p in `eval "$output_verbose_link_cmd"`; do
-    case ${prev}${p} in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
-	 prev=$p
-	 continue
-       fi
-
-       # Expand the sysroot to ease extracting the directories later.
-       if test -z "$prev"; then
-         case $p in
-         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
-         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
-         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
-         esac
-       fi
-       case $p in
-       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
-       esac
-       if test "$pre_test_object_deps_done" = no; then
-	 case ${prev} in
-	 -L | -R)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
-	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       prev=
-       ;;
-
-    *.lto.$objext) ;; # Ignore GCC LTO objects
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
-	   _LT_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
-	   _LT_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$RM -f confest.$objext
-CFLAGS=$_lt_libdeps_save_CFLAGS
-
-# PORTME: override above test on systems where it is broken
-m4_if([$1], [CXX],
-[case $host_os in
-interix[[3-9]]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_TAGVAR(predep_objects,$1)=
-  _LT_TAGVAR(postdep_objects,$1)=
-  _LT_TAGVAR(postdeps,$1)=
-  ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC* | sunCC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-])
-
-case " $_LT_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
-    [The directories searched by this compiler when creating a shared library])
-_LT_TAGDECL([], [predep_objects], [1],
-    [Dependencies to place before and after the objects being linked to
-    create a shared library])
-_LT_TAGDECL([], [postdep_objects], [1])
-_LT_TAGDECL([], [predeps], [1])
-_LT_TAGDECL([], [postdeps], [1])
-_LT_TAGDECL([], [compiler_lib_search_path], [1],
-    [The library search path used internally by the compiler when linking
-    a shared library])
-])# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_F77_CONFIG],
-[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the F77 compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  lt_save_CFLAGS=$CFLAGS
-  CC=${F77-"f77"}
-  CFLAGS=$FFLAGS
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-  GCC=$G77
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
-	fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$G77"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-  CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
-
-AC_LANG_POP
-])# _LT_LANG_F77_CONFIG
-
-
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_FC_CONFIG],
-[AC_LANG_PUSH(Fortran)
-
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for fc test sources.
-ac_ext=${ac_fc_srcext-f}
-
-# Object file extension for compiled fc test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the FC compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  lt_save_CFLAGS=$CFLAGS
-  CC=${FC-"f95"}
-  CFLAGS=$FCFLAGS
-  compiler=$CC
-  GCC=$ac_cv_fc_compiler_gnu
-
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
-	fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC=$lt_save_CC
-  CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
-
-AC_LANG_POP
-])# _LT_LANG_FC_CONFIG
-
-
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GCJ_CONFIG],
-[AC_REQUIRE([LT_PROG_GCJ])dnl
-AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GCJ-"gcj"}
-CFLAGS=$GCJFLAGS
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-
-  _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_GCJ_CONFIG
-
-
-# _LT_LANG_GO_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Go compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GO_CONFIG],
-[AC_REQUIRE([LT_PROG_GO])dnl
-AC_LANG_SAVE
-
-# Source file extension for Go test sources.
-ac_ext=go
-
-# Object file extension for compiled Go test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="package main; func main() { }"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='package main; func main() { }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GOC-"gccgo"}
-CFLAGS=$GOFLAGS
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# Go did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-
-  _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_GO_CONFIG
-
-
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_RC_CONFIG],
-[AC_REQUIRE([LT_PROG_RC])dnl
-AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=
-CC=${RC-"windres"}
-CFLAGS=
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-if test -n "$compiler"; then
-  :
-  _LT_CONFIG($1)
-fi
-
-GCC=$lt_save_GCC
-AC_LANG_RESTORE
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_RC_CONFIG
-
-
-# LT_PROG_GCJ
-# -----------
-AC_DEFUN([LT_PROG_GCJ],
-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
-  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
-    [AC_CHECK_TOOL(GCJ, gcj,)
-      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-      AC_SUBST(GCJFLAGS)])])[]dnl
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
-
-
-# LT_PROG_GO
-# ----------
-AC_DEFUN([LT_PROG_GO],
-[AC_CHECK_TOOL(GOC, gccgo,)
-])
-
-
-# LT_PROG_RC
-# ----------
-AC_DEFUN([LT_PROG_RC],
-[AC_CHECK_TOOL(RC, windres,)
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_RC], [])
-
-
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_EGREP],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_REQUIRE([AC_PROG_FGREP])dnl
-test -z "$GREP" && GREP=grep
-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
-_LT_DECL([], [EGREP], [1], [An ERE matcher])
-_LT_DECL([], [FGREP], [1], [A literal string matcher])
-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
-AC_SUBST([GREP])
-])
-
-
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_OBJDUMP],
-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
-AC_SUBST([OBJDUMP])
-])
-
-# _LT_DECL_DLLTOOL
-# ----------------
-# Ensure DLLTOOL variable is set.
-m4_defun([_LT_DECL_DLLTOOL],
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
-AC_SUBST([DLLTOOL])
-])
-
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-m4_defun([_LT_DECL_SED],
-[AC_PROG_SED
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
-    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
-])# _LT_DECL_SED
-
-m4_ifndef([AC_PROG_SED], [
-############################################################
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-############################################################
-
-m4_defun([AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])#AC_PROG_SED
-])#m4_ifndef
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_SED], [])
-
-
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  lt_unset=unset
-else
-  lt_unset=false
-fi
-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  lt_SP2NL='tr \040 \012'
-  lt_NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  lt_SP2NL='tr \100 \n'
-  lt_NL2SP='tr \r\n \100\100'
-  ;;
-esac
-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
-])# _LT_CHECK_SHELL_FEATURES
-
-
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac])
-
-  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
-    func_basename_result="${1##*/}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac
-    func_basename_result="${1##*/}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
-    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-    # positional parameters, so assign one to ordinary parameter first.
-    func_stripname_result=${3}
-    func_stripname_result=${func_stripname_result#"${1}"}
-    func_stripname_result=${func_stripname_result%"${2}"}])
-
-  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
-    func_split_long_opt_name=${1%%=*}
-    func_split_long_opt_arg=${1#*=}])
-
-  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
-    func_split_short_opt_arg=${1#??}
-    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
-  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
-    case ${1} in
-      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-      *)    func_lo2o_result=${1} ;;
-    esac])
-
-  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
-
-  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
-
-  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
-    func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
-    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
-# _LT_PATH_CONVERSION_FUNCTIONS
-# -----------------------------
-# Determine which file name conversion functions should be used by
-# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
-# for certain cross-compile configurations and native mingw.
-m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_MSG_CHECKING([how to convert $build file names to $host format])
-AC_CACHE_VAL(lt_cv_to_host_file_cmd,
-[case $host in
-  *-*-mingw* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
-        ;;
-      *-*-cygwin* )
-        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
-        ;;
-      * ) # otherwise, assume *nix
-        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
-        ;;
-    esac
-    ;;
-  *-*-cygwin* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
-        ;;
-      *-*-cygwin* )
-        lt_cv_to_host_file_cmd=func_convert_file_noop
-        ;;
-      * ) # otherwise, assume *nix
-        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
-        ;;
-    esac
-    ;;
-  * ) # unhandled hosts (and "normal" native builds)
-    lt_cv_to_host_file_cmd=func_convert_file_noop
-    ;;
-esac
-])
-to_host_file_cmd=$lt_cv_to_host_file_cmd
-AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
-_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
-         [0], [convert $build file names to $host format])dnl
-
-AC_MSG_CHECKING([how to convert $build file names to toolchain format])
-AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
-[#assume ordinary cross tools, or native build.
-lt_cv_to_tool_file_cmd=func_convert_file_noop
-case $host in
-  *-*-mingw* )
-    case $build in
-      *-*-mingw* ) # actually msys
-        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
-        ;;
-    esac
-    ;;
-esac
-])
-to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
-_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
-         [0], [convert $build files to toolchain format])dnl
-])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4
deleted file mode 100644
index 5d9acd8..0000000
--- a/m4/ltoptions.m4
+++ /dev/null
@@ -1,384 +0,0 @@
-# Helper functions for option handling.                    -*- Autoconf -*-
-#
-#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-#   Inc.
-#   Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 7 ltoptions.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
-
-
-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
-# ------------------------------------------
-m4_define([_LT_MANGLE_OPTION],
-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
-
-
-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
-# ---------------------------------------
-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
-# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
-# saved as a flag.
-m4_define([_LT_SET_OPTION],
-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
-        _LT_MANGLE_DEFUN([$1], [$2]),
-    [m4_warning([Unknown $1 option `$2'])])[]dnl
-])
-
-
-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
-# ------------------------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-m4_define([_LT_IF_OPTION],
-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
-
-
-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
-# -------------------------------------------------------
-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
-# are set.
-m4_define([_LT_UNLESS_OPTIONS],
-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
-		      [m4_define([$0_found])])])[]dnl
-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
-])[]dnl
-])
-
-
-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
-# ----------------------------------------
-# OPTION-LIST is a space-separated list of Libtool options associated
-# with MACRO-NAME.  If any OPTION has a matching handler declared with
-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
-# the unknown option and exit.
-m4_defun([_LT_SET_OPTIONS],
-[# Set options
-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-    [_LT_SET_OPTION([$1], _LT_Option)])
-
-m4_if([$1],[LT_INIT],[
-  dnl
-  dnl Simply set some default values (i.e off) if boolean options were not
-  dnl specified:
-  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
-  ])
-  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
-  ])
-  dnl
-  dnl If no reference was made to various pairs of opposing options, then
-  dnl we run the default mode handler for the pair.  For example, if neither
-  dnl `shared' nor `disable-shared' was passed, we enable building of shared
-  dnl archives by default:
-  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
-  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
-  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
-  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
-  		   [_LT_ENABLE_FAST_INSTALL])
-  ])
-])# _LT_SET_OPTIONS
-
-
-## --------------------------------- ##
-## Macros to handle LT_INIT options. ##
-## --------------------------------- ##
-
-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
-# -----------------------------------------
-m4_define([_LT_MANGLE_DEFUN],
-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
-
-
-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
-# -----------------------------------------------
-m4_define([LT_OPTION_DEFINE],
-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
-])# LT_OPTION_DEFINE
-
-
-# dlopen
-# ------
-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
-])
-
-AU_DEFUN([AC_LIBTOOL_DLOPEN],
-[_LT_SET_OPTION([LT_INIT], [dlopen])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
-
-
-# win32-dll
-# ---------
-# Declare package support for building win32 dll's.
-LT_OPTION_DEFINE([LT_INIT], [win32-dll],
-[enable_win32_dll=yes
-
-case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-esac
-
-test -z "$AS" && AS=as
-_LT_DECL([], [AS],      [1], [Assembler program])dnl
-
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
-])# win32-dll
-
-AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-_LT_SET_OPTION([LT_INIT], [win32-dll])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
-
-
-# _LT_ENABLE_SHARED([DEFAULT])
-# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_SHARED],
-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([shared],
-    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
-
-    _LT_DECL([build_libtool_libs], [enable_shared], [0],
-	[Whether or not to build shared libraries])
-])# _LT_ENABLE_SHARED
-
-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
-])
-
-AC_DEFUN([AC_DISABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], [disable-shared])
-])
-
-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_SHARED], [])
-dnl AC_DEFUN([AM_DISABLE_SHARED], [])
-
-
-
-# _LT_ENABLE_STATIC([DEFAULT])
-# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_STATIC],
-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([static],
-    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
-
-    _LT_DECL([build_old_libs], [enable_static], [0],
-	[Whether or not to build static libraries])
-])# _LT_ENABLE_STATIC
-
-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
-])
-
-AC_DEFUN([AC_DISABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], [disable-static])
-])
-
-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_STATIC], [])
-dnl AC_DEFUN([AM_DISABLE_STATIC], [])
-
-
-
-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
-# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_FAST_INSTALL],
-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([fast-install],
-    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
-
-_LT_DECL([fast_install], [enable_fast_install], [0],
-	 [Whether or not to optimize for fast installation])dnl
-])# _LT_ENABLE_FAST_INSTALL
-
-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
-
-# Old names:
-AU_DEFUN([AC_ENABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
-])
-
-AU_DEFUN([AC_DISABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
-
-
-# _LT_WITH_PIC([MODE])
-# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
-# LT_INIT options.
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-m4_define([_LT_WITH_PIC],
-[AC_ARG_WITH([pic],
-    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [lt_p=${PACKAGE-default}
-    case $withval in
-    yes|no) pic_mode=$withval ;;
-    *)
-      pic_mode=default
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for lt_pkg in $withval; do
-	IFS="$lt_save_ifs"
-	if test "X$lt_pkg" = "X$lt_p"; then
-	  pic_mode=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
-
-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
-])# _LT_WITH_PIC
-
-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
-
-# Old name:
-AU_DEFUN([AC_LIBTOOL_PICMODE],
-[_LT_SET_OPTION([LT_INIT], [pic-only])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
-
-## ----------------- ##
-## LTDL_INIT Options ##
-## ----------------- ##
-
-m4_define([_LTDL_MODE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
-		 [m4_define([_LTDL_MODE], [nonrecursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [recursive],
-		 [m4_define([_LTDL_MODE], [recursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [subproject],
-		 [m4_define([_LTDL_MODE], [subproject])])
-
-m4_define([_LTDL_TYPE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [installable],
-		 [m4_define([_LTDL_TYPE], [installable])])
-LT_OPTION_DEFINE([LTDL_INIT], [convenience],
-		 [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/m4/ltsugar.m4 b/m4/ltsugar.m4
deleted file mode 100644
index 9000a05..0000000
--- a/m4/ltsugar.m4
+++ /dev/null
@@ -1,123 +0,0 @@
-# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltsugar.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
-
-
-# lt_join(SEP, ARG1, [ARG2...])
-# -----------------------------
-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
-# associated separator.
-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
-# versions in m4sugar had bugs.
-m4_define([lt_join],
-[m4_if([$#], [1], [],
-       [$#], [2], [[$2]],
-       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
-m4_define([_lt_join],
-[m4_if([$#$2], [2], [],
-       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
-
-
-# lt_car(LIST)
-# lt_cdr(LIST)
-# ------------
-# Manipulate m4 lists.
-# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
-m4_define([lt_car], [[$1]])
-m4_define([lt_cdr],
-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
-       [$#], 1, [],
-       [m4_dquote(m4_shift($@))])])
-m4_define([lt_unquote], $1)
-
-
-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
-# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
-# Note that neither SEPARATOR nor STRING are expanded; they are appended
-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
-# than defined and empty).
-#
-# This macro is needed until we can rely on Autoconf 2.62, since earlier
-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
-m4_define([lt_append],
-[m4_define([$1],
-	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
-
-
-
-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
-# ----------------------------------------------------------
-# Produce a SEP delimited list of all paired combinations of elements of
-# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
-# has the form PREFIXmINFIXSUFFIXn.
-# Needed until we can rely on m4_combine added in Autoconf 2.62.
-m4_define([lt_combine],
-[m4_if(m4_eval([$# > 3]), [1],
-       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
-[[m4_foreach([_Lt_prefix], [$2],
-	     [m4_foreach([_Lt_suffix],
-		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
-	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
-
-
-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
-# -----------------------------------------------------------------------
-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
-m4_define([lt_if_append_uniq],
-[m4_ifdef([$1],
-	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
-		 [lt_append([$1], [$2], [$3])$4],
-		 [$5])],
-	  [lt_append([$1], [$2], [$3])$4])])
-
-
-# lt_dict_add(DICT, KEY, VALUE)
-# -----------------------------
-m4_define([lt_dict_add],
-[m4_define([$1($2)], [$3])])
-
-
-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
-# --------------------------------------------
-m4_define([lt_dict_add_subkey],
-[m4_define([$1($2:$3)], [$4])])
-
-
-# lt_dict_fetch(DICT, KEY, [SUBKEY])
-# ----------------------------------
-m4_define([lt_dict_fetch],
-[m4_ifval([$3],
-	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
-    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
-
-
-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
-# -----------------------------------------------------------------
-m4_define([lt_if_dict_fetch],
-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
-	[$5],
-    [$6])])
-
-
-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
-# --------------------------------------------------------------
-m4_define([lt_dict_filter],
-[m4_if([$5], [], [],
-  [lt_join(m4_quote(m4_default([$4], [[, ]])),
-           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
-		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
-])
diff --git a/m4/ltversion.m4 b/m4/ltversion.m4
deleted file mode 100644
index 07a8602..0000000
--- a/m4/ltversion.m4
+++ /dev/null
@@ -1,23 +0,0 @@
-# ltversion.m4 -- version numbers			-*- Autoconf -*-
-#
-#   Copyright (C) 2004 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# @configure_input@
-
-# serial 3337 ltversion.m4
-# This file is part of GNU Libtool
-
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
-
-AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
-_LT_DECL(, macro_revision, 0)
-])
diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4
deleted file mode 100644
index c573da9..0000000
--- a/m4/lt~obsolete.m4
+++ /dev/null
@@ -1,98 +0,0 @@
-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
-#
-#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004.
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 5 lt~obsolete.m4
-
-# These exist entirely to fool aclocal when bootstrapping libtool.
-#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
-# which have later been changed to m4_define as they aren't part of the
-# exported API, or moved to Autoconf or Automake where they belong.
-#
-# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
-# using a macro with the same name in our local m4/libtool.m4 it'll
-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
-# and doesn't know about Autoconf macros at all.)
-#
-# So we provide this file, which has a silly filename so it's always
-# included after everything else.  This provides aclocal with the
-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
-# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
-#
-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
-# Yes, that means every name once taken will need to remain here until
-# we give up compatibility with versions before 1.7, at which point
-# we need to keep only those names which we still refer to.
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
-
-m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
-m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
-m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
-m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
-m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
-m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
-m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
-m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
-m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
-m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
-m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
-m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
-m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
-m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
-m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
-m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
-m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
-m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
-m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
-m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
-m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
-m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
-m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
-m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
-m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
-m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
-m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
-m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
-m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
-m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
-m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
-m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
-m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
-m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
-m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
-m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
-m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
-m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
-m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt
index d1eba9b..9be3053 100644
--- a/release_docs/RELEASE.txt
+++ b/release_docs/RELEASE.txt
@@ -1,4 +1,4 @@
-HDF5 version 1.9.231 currently under development
+HDF5 version 1.9.232 currently under development
 ================================================================================
 
 
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index 0e555c2..fce59c2 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -22,8 +22,8 @@ set (H5_HDRS
     ${HDF5_SRC_DIR}/hdf5.h
     ${HDF5_SRC_DIR}/H5api_adpt.h
     ${HDF5_SRC_DIR}/H5public.h
-    ${HDF5_SRC_DIR}/H5version.h
-    ${HDF5_SRC_DIR}/H5overflow.h
+    #${HDF5_SRC_DIR}/H5version.h
+    #${HDF5_SRC_DIR}/H5overflow.h
 )
 IDE_GENERATED_PROPERTIES ("H5" "${H5_HDRS}" "${H5_SRCS}" )
 
@@ -134,12 +134,12 @@ set (H5E_SRCS
 )
 
 set (H5E_HDRS
-    ${HDF5_SRC_DIR}/H5Edefin.h
-    ${HDF5_SRC_DIR}/H5Einit.h
+    #${HDF5_SRC_DIR}/H5Edefin.h
+    #${HDF5_SRC_DIR}/H5Einit.h
     ${HDF5_SRC_DIR}/H5Epkg.h
-    ${HDF5_SRC_DIR}/H5Epubgen.h
+    #${HDF5_SRC_DIR}/H5Epubgen.h
     ${HDF5_SRC_DIR}/H5Epublic.h
-    ${HDF5_SRC_DIR}/H5Eterm.h
+    #${HDF5_SRC_DIR}/H5Eterm.h
 )
 IDE_GENERATED_PROPERTIES ("H5E" "${H5E_HDRS}" "${H5E_SRCS}" )
 
@@ -722,7 +722,6 @@ set (H5_PUBLIC_HEADERS
     ${H5Z_HDRS}
 )
 
-
 set (H5_PRIVATE_HEADERS
     ${HDF5_SRC_DIR}/H5private.h
     ${HDF5_SRC_DIR}/H5Aprivate.h
@@ -769,6 +768,56 @@ set (H5_PRIVATE_HEADERS
     ${HDF5_SRC_DIR}/H5win32defs.h
 )
 
+set (H5_GENERATED_HEADERS
+    ${HDF5_SRC_DIR}/H5Edefin.h
+    ${HDF5_SRC_DIR}/H5Einit.h
+    ${HDF5_SRC_DIR}/H5Epubgen.h
+    ${HDF5_SRC_DIR}/H5Eterm.h
+    ${HDF5_SRC_DIR}/H5version.h
+    ${HDF5_SRC_DIR}/H5overflow.h
+)
+
+if (HDF5_GENERATE_HEADERS)
+  find_package (Perl)
+  if (PERL_FOUND)
+    add_custom_command (
+        OUTPUT ${HDF5_SRC_DIR}/H5Edefin.h ${HDF5_SRC_DIR}/H5Einit.h ${HDF5_SRC_DIR}/H5Epubgen.h ${HDF5_SRC_DIR}/H5Eterm.h
+        PRE_BUILD
+        COMMAND ${PERL_EXECUTABLE}
+        ARGS ${HDF5_SOURCE_DIR}/bin/make_err ${HDF5_SRC_DIR}/H5err.txt
+        DEPENDS ${HDF5_SRC_DIR}/H5err.txt
+        COMMENT " Creating err header"
+    )
+
+    add_custom_command (
+        OUTPUT ${HDF5_SRC_DIR}/H5version.h
+        PRE_BUILD
+        COMMAND ${PERL_EXECUTABLE}
+        ARGS ${HDF5_SOURCE_DIR}/bin/make_vers ${HDF5_SRC_DIR}/H5vers.txt
+        DEPENDS ${HDF5_SRC_DIR}/H5vers.txt
+       COMMENT " Creating API version macro"
+    )
+
+    add_custom_command (
+        OUTPUT ${HDF5_SRC_DIR}/H5overflow.h
+        PRE_BUILD
+        COMMAND ${PERL_EXECUTABLE}
+        ARGS ${HDF5_SOURCE_DIR}/bin/make_overflow ${HDF5_SRC_DIR}/H5overflow.txt
+        DEPENDS ${HDF5_SRC_DIR}/H5overflow.txt
+        COMMENT " Creating Assignment overflow macro"
+    )
+
+    add_custom_target(generate_precompiled DEPENDS
+    "${HDF5_SRC_DIR}/H5version.h;${HDF5_SRC_DIR}/H5overflow.h")
+
+    add_custom_target(run_perl_scripts ALL
+        DEPENDS ${HDF5_SRC_DIR}/H5Edefin.h ${HDF5_SRC_DIR}/H5version.h ${HDF5_SRC_DIR}/H5overflow.h
+    )
+  else (PERL_FOUND)
+    message (STATUS "Cannot generate headers - perl not found")
+  endif (PERL_FOUND)
+endif (HDF5_GENERATE_HEADERS)
+
 #-----------------------------------------------------------------------------
 # Setup the H5Detect utility which generates H5Tinit with platform
 # specific type checks inside
@@ -778,6 +827,7 @@ TARGET_C_PROPERTIES (H5detect STATIC " " " ")
 if (MSVC OR MINGW)
   target_link_libraries (H5detect "ws2_32.lib")
 endif (MSVC OR MINGW)
+add_dependencies(H5detect generate_precompiled)
 
 set (CMD $<TARGET_FILE:H5detect>)
 add_custom_command (
@@ -792,6 +842,7 @@ TARGET_C_PROPERTIES (H5make_libsettings STATIC " " " ")
 if (MSVC OR MINGW)
   target_link_libraries (H5make_libsettings "ws2_32.lib")
 endif (MSVC OR MINGW)
+add_dependencies(H5make_libsettings generate_precompiled)
 
 set (CMD $<TARGET_FILE:H5make_libsettings>)
 add_custom_command (
@@ -802,59 +853,13 @@ add_custom_command (
     WORKING_DIRECTORY ${HDF5_BINARY_DIR}
 )
 
-if (GENERATE_ERROR_HEADERS)
-  find_package (Perl)
-  if (PERL_FOUND)
-    add_custom_command (
-        OUTPUT ${HDF5_BINARY_DIR}/H5Edefin.h
-        PRE_BUILD
-        COMMAND ${PERL_EXECUTABLE}
-        ARGS ${HDF5_SOURCE_DIR}/bin/make_err ${HDF5_SOURCE_DIR}/src/H5err.txt
-        DEPENDS ${HDF5_SOURCE_DIR}/src/H5err.txt
-        COMMENT " Creating err header"
-    )
-
-    add_custom_command (
-        OUTPUT ${HDF5_BINARY_DIR}/H5version.h
-        PRE_BUILD
-        COMMAND ${PERL_EXECUTABLE}
-        ARGS ${HDF5_SOURCE_DIR}/bin/make_vers ${HDF5_SOURCE_DIR}/src/H5vers.txt
-        DEPENDS ${HDF5_SOURCE_DIR}/src/H5vers.txt
-       COMMENT " Creating API version macro"
-    )
-
-    add_custom_command (
-        OUTPUT ${HDF5_BINARY_DIR}/H5overflow.h
-        PRE_BUILD
-        COMMAND ${PERL_EXECUTABLE}
-        ARGS ${HDF5_SOURCE_DIR}/bin/make_overflow ${HDF5_SOURCE_DIR}/src/H5overflow.txt
-        DEPENDS ${HDF5_SOURCE_DIR}/src/H5overflow.txt
-        COMMENT " Creating Assignment overflow macro"
-    )
-
-    add_custom_target(run_perl_scripts ALL
-        DEPENDS ${HDF5_BINARY_DIR}/H5Edefin.h ${HDF5_BINARY_DIR}/H5version.h ${HDF5_BINARY_DIR}/H5overflow.h
-    )
-  else (PERL_FOUND)
-    message (STATUS "Cannot generate headers - perl not found")
-  endif (PERL_FOUND)
-endif (GENERATE_ERROR_HEADERS)
-
 #-----------------------------------------------------------------------------
 # Add H5Tinit source to build - generated by H5Detect/CMake at configure time
 #-----------------------------------------------------------------------------
 set (common_SRCS ${common_SRCS} ${HDF5_BINARY_DIR}/H5Tinit.c)
-set_source_files_properties (${HDF5_BINARY_DIR}/H5Tinit.c GENERATED)
 set (common_SRCS ${common_SRCS} ${HDF5_BINARY_DIR}/H5lib_settings.c)
-set_source_files_properties (${HDF5_BINARY_DIR}/H5lib_settings.c GENERATED)
-set (common_SRCS ${common_SRCS} ${HDF5_BINARY_DIR}/H5Edefin.h)
-set_source_files_properties (${HDF5_BINARY_DIR}/H5Edefin.h GENERATED)
-set (common_SRCS ${common_SRCS} ${HDF5_BINARY_DIR}/H5version.h)
-set_source_files_properties (${HDF5_BINARY_DIR}/H5version.h GENERATED)
-set (common_SRCS ${common_SRCS} ${HDF5_BINARY_DIR}/H5overflow.h)
-set_source_files_properties (${HDF5_BINARY_DIR}/H5overflow.h GENERATED)
-
-add_library (${HDF5_LIB_TARGET} STATIC ${common_SRCS} ${H5_PUBLIC_HEADERS} ${H5_PRIVATE_HEADERS})
+
+add_library (${HDF5_LIB_TARGET} STATIC ${common_SRCS} ${H5_PUBLIC_HEADERS} ${H5_PRIVATE_HEADERS} ${H5_GENERATED_HEADERS})
 TARGET_C_PROPERTIES (${HDF5_LIB_TARGET} STATIC " " " ")
 target_link_libraries (${HDF5_LIB_TARGET} ${LINK_LIBS})
 if (NOT WIN32)
diff --git a/src/H5.c b/src/H5.c
index 2e05819..1bb75ad 100644
--- a/src/H5.c
+++ b/src/H5.c
@@ -74,6 +74,7 @@ hbool_t H5_api_entered_g = FALSE;
 H5_api_t H5_g;
 #else
 hbool_t H5_libinit_g = FALSE;   /* Library hasn't been initialized */
+hbool_t H5_libterm_g = FALSE;   /* Library isn't being shutdown */
 #endif
 
 #ifdef H5_HAVE_MPE
@@ -261,6 +262,9 @@ H5_term_library(void)
     if(!(H5_INIT_GLOBAL))
 	goto done;
 
+    /* Indicate that the library is being shut down */
+    H5_TERM_GLOBAL = TRUE;
+
     /* Check if we should display error output */
     (void)H5Eget_auto2(H5E_DEFAULT, &func, NULL);
 
@@ -270,7 +274,7 @@ H5_term_library(void)
      * way that would necessitate some cleanup work in the other interface.
      */
 #define DOWN(F)								      \
-    (((n = H5##F##_term_interface()) && (at + 8) < sizeof loop)?	      \
+    (((n = H5##F##_term_package()) && (at + 8) < sizeof loop)?	      \
      (sprintf(loop + at, "%s%s", (at ? "," : ""), #F),			      \
       at += HDstrlen(loop + at),					      \
       n):                                                                     \
@@ -281,20 +285,46 @@ H5_term_library(void)
 
     do {
 	pending = 0;
+
         /* Try to organize these so the "higher" level components get shut
          * down before "lower" level components that they might rely on. -QAK
          */
-	pending += DOWN(R);
-	pending += DOWN(D);
 	pending += DOWN(L);
-	pending += DOWN(G);
-	pending += DOWN(A);
-	pending += DOWN(S);
-	pending += DOWN(T);
+
+        /* Close the "top" of various interfaces (IDs, etc) but don't shut
+         *  down the whole interface yet, so that the object header messages
+         *  get serialized correctly for entries in the metadata cache and the
+         *  symbol table entry in the superblock gets serialized correctly, etc.
+         *  all of which is performed in the 'F' shutdown.
+         */
+        pending += DOWN(A_top);
+        pending += DOWN(D_top);
+        pending += DOWN(G_top);
+	pending += DOWN(R_top);
+        pending += DOWN(S_top);
+        pending += DOWN(T_top);
+
         /* Don't shut down the file code until objects in files are shut down */
         if(pending == 0)
             pending += DOWN(F);
 
+        /* Wait to shut down the "bottom" of various interfaces until the
+         *      files are closed, so pieces of the file can be serialized
+         *      correctly.
+         */
+        if(pending == 0) {
+            /* Shut down the "bottom" of the attribute, dataset, group,
+             *  reference, dataspace, and datatype interfaces, fully closing
+             *  out the interfaces now.
+             */
+            pending += DOWN(A);
+            pending += DOWN(D);
+            pending += DOWN(G);
+            pending += DOWN(R);
+            pending += DOWN(S);
+            pending += DOWN(T);
+        } /* end if */
+
         /* Don't shut down "low-level" components until "high-level" components
          * have successfully shut down.  This prevents property lists and IDs
          * from being closed "out from underneath" of the high-level objects
@@ -303,8 +333,8 @@ H5_term_library(void)
         if(pending == 0) {
             pending += DOWN(AC);
             pending += DOWN(Z);
-            pending += DOWN(FD);
             pending += DOWN(P);
+            pending += DOWN(FD);
             pending += DOWN(PL);
             /* Don't shut down the error code until other APIs which use it are shut down */
             if(pending == 0)
@@ -318,7 +348,7 @@ H5_term_library(void)
             /* Don't shut down the free list code until _everything_ else is down */
             if(pending == 0)
                 pending += DOWN(FL);
-        }
+        } /* end if */
     } while(pending && ntries++ < 100);
 
     if(pending) {
@@ -362,12 +392,17 @@ H5_term_library(void)
         (void)H5MM_free(tmp_open_stream);
     } /* end while */
 
+    /* Reset flag indicating that the library is being shut down */
+    H5_TERM_GLOBAL = FALSE;
+
     /* Mark library as closed */
     H5_INIT_GLOBAL = FALSE;
+
 done:
 #ifdef H5_HAVE_THREADSAFE
     H5_API_UNLOCK
 #endif /* H5_HAVE_THREADSAFE */
+
     return;
 } /* end H5_term_library() */
 
diff --git a/src/H5A.c b/src/H5A.c
index 4afdefe..440fc31 100644
--- a/src/H5A.c
+++ b/src/H5A.c
@@ -17,11 +17,8 @@
 /* Module Setup */
 /****************/
 
-#define H5A_PACKAGE		/*suppress error about including H5Apkg	*/
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	*/
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5A__init_interface
+#include "H5Amodule.h"          /* This source code file is part of the H5A module */
+#define H5O_FRIEND		/*suppress error about including H5Opkg	*/
 
 
 /***********/
@@ -37,6 +34,7 @@
 #include "H5Sprivate.h"		/* Dataspace functions			*/
 #include "H5SMprivate.h"	/* Shared Object Header Messages	*/
 
+
 /****************/
 /* Local Macros */
 /****************/
@@ -68,6 +66,9 @@ typedef struct H5A_iter_cb1 {
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -95,39 +96,16 @@ static const H5I_class_t H5I_ATTR_CLS[1] = {{
     (H5I_free_t)H5A_close       /* Callback routine for closing objects of this class */
 }};
 
+/* Flag indicating "top" of interface has been initialized */
+static hbool_t H5A_top_package_initialize_s = FALSE;
 
-
-/*-------------------------------------------------------------------------
- * Function:	H5A_init
- *
- * Purpose:	Initialize the interface from some other package.
- *
- * Return:	Success:	non-negative
- *		Failure:	negative
- *
- * Programmer:	Quincey Koziol
- *              Monday, November 27, 2006
- *
- *-------------------------------------------------------------------------
- */
-herr_t
-H5A_init(void)
-{
-    herr_t ret_value = SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI(FAIL)
-    /* FUNC_ENTER() does all the work */
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5A_init() */
 
 
 /*--------------------------------------------------------------------------
 NAME
-   H5A__init_interface -- Initialize interface-specific information
+   H5A__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5A__init_interface()
+    herr_t H5A__init_package()
 
 RETURNS
     Non-negative on success/Negative on failure
@@ -135,12 +113,12 @@ DESCRIPTION
     Initializes any interface-specific data or routines.
 
 --------------------------------------------------------------------------*/
-static herr_t
-H5A__init_interface(void)
+herr_t
+H5A__init_package(void)
 {
     herr_t ret_value = SUCCEED;   /* Return value */
 
-    FUNC_ENTER_STATIC
+    FUNC_ENTER_PACKAGE
 
     /*
      * Create attribute ID type.
@@ -148,21 +126,25 @@ H5A__init_interface(void)
     if(H5I_register_type(H5I_ATTR_CLS) < 0)
         HGOTO_ERROR(H5E_INTERNAL, H5E_CANTINIT, FAIL, "unable to initialize interface")
 
+    /* Mark "top" of interface as initialized, too */
+    H5A_top_package_initialize_s = TRUE;
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5A__init_interface() */
+} /* end H5A__init_package() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5A_term_interface
+    H5A_top_term_package
  PURPOSE
     Terminate various H5A objects
  USAGE
-    void H5A_term_interface()
+    void H5A_top_term_package()
  RETURNS
  DESCRIPTION
-    Release any other resources allocated.
+    Release IDs for the atom group, deferring full interface shutdown
+    until later (in H5A_term_package).
  GLOBAL VARIABLES
  COMMENTS, BUGS, ASSUMPTIONS
      Can't report errors...
@@ -170,32 +152,68 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 int
-H5A_term_interface(void)
+H5A_top_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5A_top_package_initialize_s) {
 	if(H5I_nmembers(H5I_ATTR) > 0) {
 	    (void)H5I_clear_type(H5I_ATTR, FALSE, FALSE);
             n++; /*H5I*/
 	} /* end if */
-        else {
-            /* Close deprecated interface */
-            n += H5A__term_deprec_interface();
 
-	    /* Destroy the attribute object id group */
-	    (void)H5I_dec_type_ref(H5I_ATTR);
-            n++; /*H5I*/
+        /* Mark closed */
+        if(0 == n)
+            H5A_top_package_initialize_s = FALSE;
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(n)
+} /* H5A_top_term_package() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5A_term_package
+ PURPOSE
+    Terminate various H5A objects
+ USAGE
+    void H5A_term_package()
+ RETURNS
+ DESCRIPTION
+    Release any other resources allocated.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+     Can't report errors...
+
+     Finishes shutting down the interface, after H5A_top_term_package()
+     is called
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+int
+H5A_term_package(void)
+{
+    int	n = 0;
+
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+    if(H5_PKG_INIT_VAR) {
+        /* Sanity checks */
+        HDassert(0 == H5I_nmembers(H5I_ATTR));
+        HDassert(FALSE == H5A_top_package_initialize_s);
+
+        /* Destroy the attribute object id group */
+        n += (H5I_dec_type_ref(H5I_ATTR) > 0);
 
-	    /* Mark closed */
-	    H5_interface_initialize_g = 0;
-	} /* end else */
+        /* Mark closed */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* H5A_term_interface() */
+} /* H5A_term_package() */
 
 
 /*--------------------------------------------------------------------------
diff --git a/src/H5AC.c b/src/H5AC.c
index 525f78b..6cf77c2 100644
--- a/src/H5AC.c
+++ b/src/H5AC.c
@@ -31,11 +31,9 @@
 /* Module Setup */
 /****************/
 
-#define H5AC_PACKAGE            /*suppress error about including H5ACpkg  */
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5ACmodule.h"         /* This source code file is part of the H5AC module */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5AC_init_interface
 
 /***********/
 /* Headers */
@@ -74,6 +72,9 @@ static herr_t H5AC__ext_config_2_int_config(H5AC_cache_config_t *ext_conf_ptr,
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -135,7 +136,6 @@ static const char *H5AC_entry_type_names[H5AC_NTYPES] =
  * Purpose:	Initialize the interface from some other layer.
  *
  * Return:	Success:	non-negative
- *
  *		Failure:	negative
  *
  * Programmer:	Quincey Koziol
@@ -146,7 +146,7 @@ static const char *H5AC_entry_type_names[H5AC_NTYPES] =
 herr_t
 H5AC_init(void)
 {
-    herr_t ret_value=SUCCEED;   /* Return value */
+    herr_t ret_value = SUCCEED;   /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
     /* FUNC_ENTER() does all the work */
@@ -157,7 +157,7 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5AC_init_interface
+ * Function:	H5AC__init_package
  *
  * Purpose:	Initialize interface-specific information
  *
@@ -168,8 +168,8 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t
-H5AC_init_interface(void)
+herr_t
+H5AC__init_package(void)
 {
 #ifdef H5_HAVE_PARALLEL
     H5P_genplist_t  *xfer_plist;    /* Dataset transfer property list object */
@@ -177,7 +177,7 @@ H5AC_init_interface(void)
 #endif /* H5_HAVE_PARALLEL */
     herr_t ret_value = SUCCEED;     /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_PACKAGE
 
 #ifdef H5_HAVE_PARALLEL
     /* Sanity check */
@@ -224,17 +224,16 @@ H5AC_init_interface(void)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5AC_init_interface() */
+} /* end H5AC__init_package() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5AC_term_interface
+ * Function:	H5AC_term_package
  *
  * Purpose:	Terminate this interface.
  *
  * Return:	Success:	Positive if anything was done that might
  *				affect other interfaces; zero otherwise.
- *
  * 		Failure:	Negative.
  *
  * Programmer:	Quincey Koziol
@@ -243,13 +242,13 @@ done:
  *-------------------------------------------------------------------------
  */
 int
-H5AC_term_interface(void)
+H5AC_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5_PKG_INIT_VAR) {
 #ifdef H5_HAVE_PARALLEL
         if(H5AC_dxpl_id > 0 || H5AC_ind_dxpl_id > 0) {
             /* Indicate more work to do */
@@ -258,30 +257,20 @@ H5AC_term_interface(void)
             /* Close H5AC dxpl */
             if(H5I_dec_ref(H5AC_dxpl_id) < 0 || H5I_dec_ref(H5AC_ind_dxpl_id) < 0)
                 H5E_clear_stack(NULL); /*ignore error*/
-            else {
-                /* Reset static IDs */
-                H5AC_dxpl_id = (-1);
-                H5AC_ind_dxpl_id = (-1);
-
-                /* Reset interface initialization flag */
-                H5_interface_initialize_g = 0;
-            } /* end else */
         } /* end if */
-        else {
-#endif /* H5_HAVE_PARALLEL */
-            /* Reset static IDs */
-            H5AC_dxpl_id = (-1);
-            H5AC_ind_dxpl_id = (-1);
-#ifdef H5_HAVE_PARALLEL
-        } /* end else */
 #endif /* H5_HAVE_PARALLEL */
+            
+        /* Reset static IDs */
+        H5AC_dxpl_id = (-1);
+        H5AC_ind_dxpl_id = (-1);
 
         /* Reset interface initialization flag */
-        H5_interface_initialize_g = 0;
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5AC_term_interface() */
+} /* end H5AC_term_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -1066,7 +1055,7 @@ H5AC_protect(H5F_t *f, hid_t dxpl_id, const H5AC_class_t *type, haddr_t addr,
     size_t		trace_entry_size = 0;
     FILE *              trace_file_ptr = NULL;
 #endif /* H5AC__TRACE_FILE_ENABLED */
-    void *		ret_value;      /* Return value */
+    void *		ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
diff --git a/src/H5ACmodule.h b/src/H5ACmodule.h
new file mode 100644
index 0000000..a8dba59
--- /dev/null
+++ b/src/H5ACmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5AC package.  Including this header means that the source file
+ *		is part of the H5AC package.
+ */
+#ifndef _H5ACmodule_H
+#define _H5ACmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5AC_MODULE
+#define H5_MY_PKG       H5AC
+#define H5_MY_PKG_ERR   H5E_CACHE
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5ACmodule_H */
+
diff --git a/src/H5ACmpio.c b/src/H5ACmpio.c
index 6c2b924..fdad19a 100644
--- a/src/H5ACmpio.c
+++ b/src/H5ACmpio.c
@@ -29,11 +29,9 @@
 /* Module Setup */
 /****************/
 
-#define H5AC_PACKAGE            /*suppress error about including H5ACpkg  */
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5ACmodule.h"         /* This source code file is part of the H5AC module */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5AC__init_mpio_interface
 
 /***********/
 /* Headers */
@@ -135,33 +133,6 @@ H5FL_DEFINE(H5AC_aux_t);
 H5FL_DEFINE_STATIC(H5AC_slist_entry_t);
 
 
-/*-------------------------------------------------------------------------
- * Function:    H5AC__init_mpio_interface
- *
- * Purpose:     Initialize interface-specific information
- *
- * Return:      Non-negative on success/Negative on failure
- *
- * Programmer:  Quincey Koziol
- *              6/20/15
- *
- *-------------------------------------------------------------------------
- */
-static herr_t
-H5AC__init_mpio_interface(void)
-{
-    herr_t ret_value = SUCCEED;   /* Return value */
-
-    FUNC_ENTER_STATIC
-
-    /* Funnel all work to H5AC_init() */
-    if(H5AC_init() < 0)
-        HGOTO_ERROR(H5E_FUNC, H5E_CANTINIT, FAIL, "interface initialization failed")
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* H5AC__init_mpio_interface() */
-
 
 /*-------------------------------------------------------------------------
  * Function:    H5AC__set_sync_point_done_callback
diff --git a/src/H5ACpkg.h b/src/H5ACpkg.h
index 74bf079..050e21c 100644
--- a/src/H5ACpkg.h
+++ b/src/H5ACpkg.h
@@ -28,7 +28,7 @@
  *
  */
 
-#ifndef H5AC_PACKAGE
+#if !(defined H5AC_FRIEND || defined H5AC_MODULE)
 #error "Do not include this file outside the H5AC package!"
 #endif
 
diff --git a/src/H5Abtree2.c b/src/H5Abtree2.c
index 5e29d3f..28e49a6 100644
--- a/src/H5Abtree2.c
+++ b/src/H5Abtree2.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5A_PACKAGE		/*suppress error about including H5Apkg  */
+#include "H5Amodule.h"          /* This source code file is part of the H5A module */
 
 
 /***********/
@@ -247,7 +247,7 @@ H5A__dense_btree2_name_compare(const void *_bt2_udata, const void *_bt2_rec)
 {
     const H5A_bt2_ud_common_t *bt2_udata = (const H5A_bt2_ud_common_t *)_bt2_udata;
     const H5A_dense_bt2_name_rec_t *bt2_rec = (const H5A_dense_bt2_name_rec_t *)_bt2_rec;
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -438,7 +438,7 @@ H5A__dense_btree2_corder_compare(const void *_bt2_udata, const void *_bt2_rec)
 {
     const H5A_bt2_ud_common_t *bt2_udata = (const H5A_bt2_ud_common_t *)_bt2_udata;
     const H5A_dense_bt2_corder_rec_t *bt2_rec = (const H5A_dense_bt2_corder_rec_t *)_bt2_rec;
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
diff --git a/src/H5Adense.c b/src/H5Adense.c
index 6d18249..3dc3a42 100644
--- a/src/H5Adense.c
+++ b/src/H5Adense.c
@@ -29,8 +29,8 @@
 /* Module Setup */
 /****************/
 
-#define H5A_PACKAGE		/*suppress error about including H5Apkg  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg  */
+#include "H5Amodule.h"          /* This source code file is part of the H5A module */
+#define H5O_FRIEND		/*suppress error about including H5Opkg  */
 
 
 /***********/
@@ -1149,7 +1149,7 @@ H5A_dense_iterate(H5F_t *f, hid_t dxpl_id, hid_t loc_id, const H5O_ainfo_t *ainf
     H5A_attr_table_t atable = {0, NULL};        /* Table of attributes */
     H5B2_t *bt2 = NULL;                 /* v2 B-tree handle for index */
     haddr_t bt2_addr;                   /* Address of v2 B-tree to use for lookup */
-    herr_t ret_value;                   /* Return value */
+    herr_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1701,7 +1701,7 @@ H5A_dense_exists(H5F_t *f, hid_t dxpl_id, const H5O_ainfo_t *ainfo, const char *
     htri_t attr_sharable;               /* Flag indicating attributes are sharable */
     htri_t ret_value = TRUE;            /* Return value */
 
-    FUNC_ENTER_NOAPI(NULL)
+    FUNC_ENTER_NOAPI(FAIL)
 
     /*
      * Check arguments.
diff --git a/src/H5Adeprec.c b/src/H5Adeprec.c
index ccc7659..ae0f041 100644
--- a/src/H5Adeprec.c
+++ b/src/H5Adeprec.c
@@ -31,11 +31,8 @@
 /* Module Setup */
 /****************/
 
-#define H5A_PACKAGE		/*suppress error about including H5Apkg   */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	*/
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5A__init_deprec_interface
+#include "H5Amodule.h"          /* This source code file is part of the H5A module */
+#define H5O_FRIEND		/*suppress error about including H5Opkg	*/
 
 
 /***********/
@@ -84,51 +81,6 @@
 /*******************/
 
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5A__init_deprec_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5A__init_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5A_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5A__init_deprec_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5A_init())
-} /* H5A__init_deprec_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5A__term_deprec_interface -- Terminate interface
-USAGE
-    herr_t H5A__term_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5A__term_deprec_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5A__term_deprec_interface() */
-
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 
 /*--------------------------------------------------------------------------
diff --git a/src/H5Aint.c b/src/H5Aint.c
index 91bbc24..193e8f4 100644
--- a/src/H5Aint.c
+++ b/src/H5Aint.c
@@ -28,8 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5A_PACKAGE		/*suppress error about including H5Apkg  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Amodule.h"          /* This source code file is part of the H5A module */
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
 
 
 /***********/
@@ -142,11 +142,11 @@ H5A_t *
 H5A_create(const H5G_loc_t *loc, const char *name, const H5T_t *type,
     const H5S_t *space, hid_t acpl_id, hid_t dxpl_id)
 {
-    H5A_t	*attr = NULL;   /* Attribute created */
-    hssize_t	snelmts;	/* elements in attribute */
-    size_t	nelmts;		/* elements in attribute */
-    htri_t      tri_ret;        /* htri_t return value */
-    H5A_t	*ret_value;     /* Return value */
+    H5A_t	*attr = NULL;           /* Attribute created */
+    hssize_t	snelmts;	        /* elements in attribute */
+    size_t	nelmts;		        /* elements in attribute */
+    htri_t      exists;                 /* Whether attribute exists */
+    H5A_t	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, loc->oloc->addr, NULL)
 
@@ -161,9 +161,9 @@ H5A_create(const H5G_loc_t *loc, const char *name, const H5T_t *type,
      *  name, but it's going to be hard to unwind all the special cases on
      *  failure, so just check first, for now - QAK)
      */
-    if((tri_ret = H5O_attr_exists(loc->oloc, name, H5AC_ind_dxpl_id)) < 0)
+    if((exists = H5O_attr_exists(loc->oloc, name, H5AC_ind_dxpl_id)) < 0)
         HGOTO_ERROR(H5E_ATTR, H5E_NOTFOUND, NULL, "error checking attributes")
-    else if(tri_ret > 0)
+    else if(exists > 0)
         HGOTO_ERROR(H5E_ATTR, H5E_ALREADYEXISTS, NULL, "attribute already exists")
 
     /* Check if the dataspace has an extent set (or is NULL) */
@@ -360,7 +360,7 @@ H5A_open_by_idx(const H5G_loc_t *loc, const char *obj_name, H5_index_t idx_type,
     H5O_loc_t   obj_oloc;            	/* Opened object object location */
     hbool_t     loc_found = FALSE;      /* Entry at 'obj_name' found */
     H5A_t       *attr = NULL;           /* Attribute from object header */
-    H5A_t       *ret_value;             /* Return value */
+    H5A_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -424,7 +424,7 @@ H5A_open_by_name(const H5G_loc_t *loc, const char *obj_name, const char *attr_na
     H5O_loc_t   obj_oloc;            	/* Opened object object location */
     hbool_t     loc_found = FALSE;      /* Entry at 'obj_name' found */
     H5A_t       *attr = NULL;           /* Attribute from object header */
-    H5A_t       *ret_value;             /* Return value */
+    H5A_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -705,7 +705,7 @@ ssize_t
 H5A__get_name(H5A_t *attr, size_t buf_size, char *buf)
 {
     size_t              copy_len, nbytes;
-    ssize_t		ret_value;
+    ssize_t		ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -849,7 +849,8 @@ H5A_get_create_plist(H5A_t* attr)
     H5P_genplist_t      *plist;              /* Default property list */
     hid_t               new_plist_id;        /* ID of ACPL to return */
     H5P_genplist_t      *new_plist;          /* ACPL to return */
-    hid_t               ret_value;
+    hid_t               ret_value = H5I_INVALID_HID;    /* Return value */
+
     FUNC_ENTER_NOAPI_NOINIT
 
     if(NULL == (plist = (H5P_genplist_t *)H5I_object(H5P_LST_ATTRIBUTE_CREATE_ID_g)))
@@ -888,7 +889,9 @@ done:
 herr_t
 H5A__get_info(const H5A_t *attr, H5A_info_t *ainfo)
 {
-    FUNC_ENTER_NOAPI_NOERR
+    herr_t ret_value = SUCCEED;           /* Return value */
+
+    FUNC_ENTER_NOAPI(FAIL)
 
     /* Check args */
     HDassert(attr);
@@ -906,7 +909,8 @@ H5A__get_info(const H5A_t *attr, H5A_info_t *ainfo)
         ainfo->corder = attr->shared->crt_idx;
     } /* end else */
 
-    FUNC_LEAVE_NOAPI(SUCCEED)
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5A__get_info() */
 
 
@@ -1099,15 +1103,16 @@ done:
 H5O_loc_t *
 H5A_oloc(H5A_t *attr)
 {
-    H5O_loc_t *ret_value;   /* Return value */
+    H5O_loc_t *ret_value = NULL;   /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(NULL)
 
     HDassert(attr);
 
     /* Set return value */
     ret_value = &(attr->oloc);
 
+done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5A_oloc() */
 
@@ -1130,15 +1135,16 @@ H5A_oloc(H5A_t *attr)
 H5G_name_t *
 H5A_nameof(H5A_t *attr)
 {
-    H5G_name_t *ret_value;   /* Return value */
+    H5G_name_t *ret_value = NULL;   /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(NULL)
 
     HDassert(attr);
 
     /* Set return value */
-    ret_value=&(attr->path);
+    ret_value = &(attr->path);
 
+done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5A_nameof() */
 
@@ -1159,15 +1165,16 @@ H5A_nameof(H5A_t *attr)
 H5T_t *
 H5A_type(const H5A_t *attr)
 {
-    H5T_t *ret_value;   /* Return value */
+    H5T_t *ret_value = NULL;   /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(NULL)
 
     HDassert(attr);
 
     /* Set return value */
     ret_value = attr->shared->dt;
 
+done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5A_type() */
 
@@ -1193,7 +1200,7 @@ H5A_exists_by_name(H5G_loc_t loc, const char *obj_name, const char *attr_name,
     H5G_name_t  obj_path;            	/* Opened object group hier. path */
     H5O_loc_t   obj_oloc;            	/* Opened object object location */
     hbool_t     loc_found = FALSE;      /* Entry at 'obj_name' found */
-    htri_t	ret_value;              /* Return value */
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1552,7 +1559,7 @@ H5A__attr_cmp_name_dec(const void *attr1, const void *attr2)
 static int
 H5A__attr_cmp_corder_inc(const void *attr1, const void *attr2)
 {
-    int ret_value;              /* Return value */
+    int ret_value = 0;          /* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -1587,7 +1594,7 @@ H5A__attr_cmp_corder_inc(const void *attr1, const void *attr2)
 static int
 H5A__attr_cmp_corder_dec(const void *attr1, const void *attr2)
 {
-    int ret_value;              /* Return value */
+    int ret_value = 0;              /* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -1790,8 +1797,8 @@ done:
 htri_t
 H5A_get_ainfo(H5F_t *f, hid_t dxpl_id, H5O_t *oh, H5O_ainfo_t *ainfo)
 {
-    H5B2_t *bt2_name = NULL;            /* v2 B-tree handle for name index */
-    htri_t ret_value;   /* Return value */
+    H5B2_t *bt2_name = NULL;    /* v2 B-tree handle for name index */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, oh->cache_info.addr, FAIL)
 
@@ -1857,8 +1864,9 @@ H5A_set_version(const H5F_t *f, H5A_t *attr)
 {
     hbool_t type_shared, space_shared;  /* Flags to indicate that shared messages are used for this attribute */
     hbool_t use_latest_format;          /* Flag indicating the newest file format should be used */
+    herr_t ret_value = SUCCEED;   /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(FAIL)
 
     /* check arguments */
     HDassert(f);
@@ -1888,7 +1896,8 @@ H5A_set_version(const H5F_t *f, H5A_t *attr)
     else
         attr->shared->version = H5O_ATTR_VERSION_1;   /* Write out basic version */
 
-    FUNC_LEAVE_NOAPI(SUCCEED)
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5A_set_version() */
 
 
@@ -1925,8 +1934,7 @@ H5A_attr_copy_file(const H5A_t *attr_src, H5F_t *file_dst, hbool_t *recompute_si
     void       *buf = NULL;             /* Buffer for copying data */
     void       *reclaim_buf = NULL;     /* Buffer for reclaiming data */
     hid_t       buf_sid = -1;           /* ID for buffer dataspace */
-
-    H5A_t       *ret_value;             /* Return value */
+    H5A_t      *ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Amodule.h b/src/H5Amodule.h
new file mode 100644
index 0000000..e347fe1
--- /dev/null
+++ b/src/H5Amodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5A package.  Including this header means that the source file
+ *		is part of the H5A package.
+ */
+#ifndef _H5Amodule_H
+#define _H5Amodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5A_MODULE
+#define H5_MY_PKG       H5A
+#define H5_MY_PKG_ERR   H5E_ATTR
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Amodule_H */
+
diff --git a/src/H5Apkg.h b/src/H5Apkg.h
index d3fcd53..b815d11 100644
--- a/src/H5Apkg.h
+++ b/src/H5Apkg.h
@@ -21,7 +21,7 @@
  *              the H5A package.  Source files outside the H5A package should
  *              include H5Aprivate.h instead.
  */
-#ifndef H5A_PACKAGE
+#if !(defined H5A_FRIEND || defined H5A_MODULE)
 #error "Do not include this file outside the H5A package!"
 #endif
 
@@ -184,8 +184,6 @@ H5_DLLVAR const H5B2_class_t H5A_BT2_CORDER[1];
 /******************************/
 
 /* Function prototypes for H5A package scope */
-H5_DLL herr_t H5A_init(void);
-H5_DLL herr_t H5A__term_deprec_interface(void);
 H5_DLL H5A_t *H5A_create(const H5G_loc_t *loc, const char *name,
     const H5T_t *type, const H5S_t *space, hid_t acpl_id, hid_t dxpl_id);
 H5_DLL H5A_t *H5A_open_by_name(const H5G_loc_t *loc, const char *obj_name,
diff --git a/src/H5Atest.c b/src/H5Atest.c
index 19b5547..d57bbe1 100644
--- a/src/H5Atest.c
+++ b/src/H5Atest.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5A_PACKAGE		/*suppress error about including H5Apkg  */
+#include "H5Amodule.h"          /* This source code file is part of the H5A module */
 #define H5A_TESTING		/*suppress warning about H5A testing funcs*/
 
 
@@ -95,7 +95,7 @@ htri_t
 H5A_is_shared_test(hid_t attr_id)
 {
     H5A_t	*attr;                  /* Attribute object for ID */
-    htri_t	ret_value;              /* Return value */
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5B.c b/src/H5B.c
index b1f3388..48be703 100644
--- a/src/H5B.c
+++ b/src/H5B.c
@@ -97,7 +97,7 @@
 /* Module Setup */
 /****************/
 
-#define H5B_PACKAGE		/*suppress error about including H5Bpkg	  */
+#include "H5Bmodule.h"          /* This source code file is part of the H5B module */
 
 
 /***********/
@@ -166,6 +166,9 @@ static H5B_t * H5B__copy(const H5B_t *old_bt);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Declare a free list to manage the haddr_t sequence information */
 H5FL_SEQ_DEFINE(haddr_t);
 
@@ -309,7 +312,7 @@ H5B_find(H5F_t *f, hid_t dxpl_id, const H5B_class_t *type, haddr_t addr, void *u
     H5B_cache_ud_t cache_udata;         /* User-data for metadata cache callback */
     unsigned    idx = 0, lt = 0, rt;    /* Final, left & right key indices */
     int	        cmp = 1;                /* Key comparison value */
-    htri_t	ret_value;              /* Return value */
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1203,7 +1206,7 @@ herr_t
 H5B_iterate(H5F_t *f, hid_t dxpl_id, const H5B_class_t *type, haddr_t addr,
     H5B_operator_t op, void *udata)
 {
-    herr_t		ret_value;      /* Return value */
+    herr_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_NOAPI_NOERR
 
@@ -1700,7 +1703,7 @@ H5B_shared_new(const H5F_t *f, const H5B_class_t *type, size_t sizeof_rkey)
 {
     H5B_shared_t *shared = NULL;        /* New shared B-tree struct */
     size_t	u;                      /* Local index variable */
-    H5B_shared_t *ret_value;            /* Return value */
+    H5B_shared_t *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1808,7 +1811,7 @@ H5B__copy(const H5B_t *old_bt)
 {
     H5B_t		*new_node = NULL;
     H5B_shared_t        *shared;        /* Pointer to shared B-tree info */
-    H5B_t		*ret_value;
+    H5B_t		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5B2.c b/src/H5B2.c
index 7b5aa16..7eb88c4 100644
--- a/src/H5B2.c
+++ b/src/H5B2.c
@@ -33,7 +33,8 @@
 /* Module Setup */
 /****************/
 
-#define H5B2_PACKAGE		/*suppress error about including H5B2pkg  */
+#include "H5B2module.h"         /* This source code file is part of the H5B2 module */
+
 
 /***********/
 /* Headers */
@@ -67,6 +68,9 @@
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* v2 B-tree client ID to class mapping */
 
 /* Remember to add client ID to H5B2_subid_t in H5B2private.h when adding a new
@@ -132,7 +136,7 @@ H5B2_create(H5F_t *f, hid_t dxpl_id, const H5B2_create_t *cparam, void *ctx_udat
     H5B2_hdr_t  *hdr = NULL;            /* Pointer to the B-tree header */
     H5B2_hdr_cache_ud_t cache_udata;    /* User-data for callback */
     haddr_t     hdr_addr;               /* B-tree header address */
-    H5B2_t      *ret_value;             /* Return value */
+    H5B2_t      *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -206,7 +210,7 @@ H5B2_open(H5F_t *f, hid_t dxpl_id, haddr_t addr, void *ctx_udata)
     H5B2_t	*bt2 = NULL;            /* Pointer to the B-tree */
     H5B2_hdr_t	*hdr = NULL;            /* Pointer to the B-tree header */
     H5B2_hdr_cache_ud_t cache_udata;    /* User-data for callback */
-    H5B2_t	*ret_value;             /* Return value */
+    H5B2_t	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5B2cache.c b/src/H5B2cache.c
index 9e43ff8..421e24b 100644
--- a/src/H5B2cache.c
+++ b/src/H5B2cache.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5B2_PACKAGE		/*suppress error about including H5B2pkg  */
+#include "H5B2module.h"         /* This source code file is part of the H5B2 module */
 
 
 /***********/
@@ -216,7 +216,7 @@ H5B2__cache_hdr_deserialize(const void *_image, size_t H5_ATTR_UNUSED len,
     uint32_t            stored_chksum;  /* Stored metadata checksum value */
     uint32_t            computed_chksum; /* Computed metadata checksum value */
     const uint8_t	*image = (const uint8_t *)_image;       /* Pointer into raw data buffer */
-    H5B2_hdr_t		*ret_value;     /* Return value */
+    H5B2_hdr_t		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -490,7 +490,7 @@ H5B2__cache_int_deserialize(const void *_image, size_t H5_ATTR_UNUSED len,
     uint32_t            stored_chksum;  /* Stored metadata checksum value */
     uint32_t            computed_chksum; /* Computed metadata checksum value */
     unsigned		u;              /* Local index variable */
-    H5B2_internal_t	*ret_value;     /* Return value */
+    H5B2_internal_t	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -798,7 +798,7 @@ H5B2__cache_leaf_deserialize(const void *_image, size_t H5_ATTR_UNUSED len,
     uint32_t            stored_chksum;  /* Stored metadata checksum value */
     uint32_t            computed_chksum; /* Computed metadata checksum value */
     unsigned		u;              /* Local index variable */
-    H5B2_leaf_t		*ret_value;     /* Return value */
+    H5B2_leaf_t		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5B2dbg.c b/src/H5B2dbg.c
index d3b5014..f723d10 100644
--- a/src/H5B2dbg.c
+++ b/src/H5B2dbg.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5B2_PACKAGE		/*suppress error about including H5B2pkg  */
+#include "H5B2module.h"         /* This source code file is part of the H5B2 module */
+
 
 /***********/
 /* Headers */
diff --git a/src/H5B2hdr.c b/src/H5B2hdr.c
index d873cf6..16d8467 100644
--- a/src/H5B2hdr.c
+++ b/src/H5B2hdr.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5B2_PACKAGE		/*suppress error about including H5B2pkg  */
+#include "H5B2module.h"         /* This source code file is part of the H5B2 module */
+
 
 /***********/
 /* Headers */
@@ -239,7 +240,7 @@ H5B2_hdr_t *
 H5B2__hdr_alloc(H5F_t *f)
 {
     H5B2_hdr_t *hdr = NULL;             /* v2 B-tree header */
-    H5B2_hdr_t *ret_value;              /* Return value */
+    H5B2_hdr_t *ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -285,8 +286,8 @@ haddr_t
 H5B2__hdr_create(H5F_t *f, hid_t dxpl_id, const H5B2_create_t *cparam,
     void *ctx_udata)
 {
-    H5B2_hdr_t *hdr = NULL;     /* The new v2 B-tree header information */
-    haddr_t ret_value;          /* Return value */
+    H5B2_hdr_t *hdr = NULL;             /* The new v2 B-tree header information */
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_PACKAGE
 
diff --git a/src/H5B2int.c b/src/H5B2int.c
index 0f884c2..f412260 100644
--- a/src/H5B2int.c
+++ b/src/H5B2int.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5B2_PACKAGE		/*suppress error about including H5B2pkg  */
+#include "H5B2module.h"         /* This source code file is part of the H5B2 module */
+
 
 /***********/
 /* Headers */
@@ -1837,7 +1838,7 @@ H5B2__protect_leaf(H5B2_hdr_t *hdr, hid_t dxpl_id, haddr_t addr, uint16_t nrec,
     unsigned flags)
 {
     H5B2_leaf_cache_ud_t udata;         /* User-data for callback */
-    H5B2_leaf_t *ret_value;             /* Return value */
+    H5B2_leaf_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -1959,7 +1960,7 @@ H5B2__protect_internal(H5B2_hdr_t *hdr, hid_t dxpl_id, haddr_t addr,
     uint16_t nrec, uint16_t depth, unsigned flags)
 {
     H5B2_internal_cache_ud_t udata;     /* User data to pass through to cache 'deserialize' callback */
-    H5B2_internal_t *ret_value;         /* Return value */
+    H5B2_internal_t *ret_value = NULL;  /* Return value */
 
     FUNC_ENTER_PACKAGE
 
diff --git a/src/H5B2module.h b/src/H5B2module.h
new file mode 100644
index 0000000..0fc30a5
--- /dev/null
+++ b/src/H5B2module.h
@@ -0,0 +1,36 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5B2 package.  Including this header means that the source file
+ *		is part of the H5B2 package.
+ */
+#ifndef _H5B2module_H
+#define _H5B2module_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5B2_MODULE
+#define H5_MY_PKG       H5B2
+#define H5_MY_PKG_ERR   H5E_BTREE
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5B2module_H */
+
+
diff --git a/src/H5B2pkg.h b/src/H5B2pkg.h
index b13c58d..d661efa 100644
--- a/src/H5B2pkg.h
+++ b/src/H5B2pkg.h
@@ -21,7 +21,7 @@
  *		the H5B2 package.  Source files outside the H5B2 package should
  *		include H5B2private.h instead.
  */
-#ifndef H5B2_PACKAGE
+#if !(defined H5B2_FRIEND || defined H5B2_MODULE)
 #error "Do not include this file outside the H5B2 package!"
 #endif
 
diff --git a/src/H5B2stat.c b/src/H5B2stat.c
index bdb4a1f..10c692e 100644
--- a/src/H5B2stat.c
+++ b/src/H5B2stat.c
@@ -24,7 +24,7 @@
 /* Module Setup */
 /****************/
 
-#define H5B2_PACKAGE        /* Suppress error about including H5B2pkg   */
+#include "H5B2module.h"         /* This source code file is part of the H5B2 module */
 
 
 /***********/
diff --git a/src/H5B2test.c b/src/H5B2test.c
index 31cf8e1..8ed364e 100644
--- a/src/H5B2test.c
+++ b/src/H5B2test.c
@@ -25,7 +25,7 @@
 /* Module Setup */
 /****************/
 
-#define H5B2_PACKAGE		/*suppress error about including H5B2pkg  */
+#include "H5B2module.h"         /* This source code file is part of the H5B2 module */
 #define H5B2_TESTING		/*suppress warning about H5B2 testing funcs*/
 
 
@@ -120,7 +120,7 @@ H5B2__test_crt_context(void *_f)
 {
     H5F_t *f = (H5F_t *)_f;     /* User data for building callback context */
     H5B2_test_ctx_t *ctx;       /* Callback context structure */
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -469,7 +469,7 @@ int
 H5B2_get_node_depth_test(H5B2_t *bt2, hid_t dxpl_id, void *udata)
 {
     H5B2_node_info_test_t ninfo;        /* Node information */
-    int		ret_value;              /* Return information */
+    int		ret_value = -1;         /* Return information */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5Bcache.c b/src/H5Bcache.c
index d071712..d08f1bc 100644
--- a/src/H5Bcache.c
+++ b/src/H5Bcache.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5B_PACKAGE		/*suppress error about including H5Bpkg  */
+#include "H5Bmodule.h"          /* This source code file is part of the H5B module */
 
 
 /***********/
@@ -151,7 +151,7 @@ H5B__deserialize(const void *_image, size_t H5_ATTR_UNUSED len, void *_udata,
     const uint8_t *image = (const uint8_t *)_image;     /* Pointer into image buffer */
     uint8_t *native;            /* Pointer to native keys */
     unsigned u;                 /* Local index variable */
-    H5B_t *ret_value;           /* Return value */
+    H5B_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5Bdbg.c b/src/H5Bdbg.c
index e6d54dc..d92a24b 100644
--- a/src/H5Bdbg.c
+++ b/src/H5Bdbg.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5B_PACKAGE		/*suppress error about including H5Bpkg	  */
+#include "H5Bmodule.h"          /* This source code file is part of the H5B module */
 
 
 /***********/
diff --git a/src/H5Bmodule.h b/src/H5Bmodule.h
new file mode 100644
index 0000000..6800b26
--- /dev/null
+++ b/src/H5Bmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5B package.  Including this header means that the source file
+ *		is part of the H5B package.
+ */
+#ifndef _H5Bmodule_H
+#define _H5Bmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5B_MODULE
+#define H5_MY_PKG       H5B
+#define H5_MY_PKG_ERR   H5E_BTREE
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5Bmodule_H */
+
diff --git a/src/H5Bpkg.h b/src/H5Bpkg.h
index 374fcb5..e645626 100644
--- a/src/H5Bpkg.h
+++ b/src/H5Bpkg.h
@@ -21,7 +21,7 @@
  *		the H5B package.  Source files outside the H5B package should
  *		include H5Bprivate.h instead.
  */
-#ifndef H5B_PACKAGE
+#if !(defined H5B_FRIEND || defined H5B_MODULE)
 #error "Do not include this file outside the H5B package!"
 #endif
 
diff --git a/src/H5C.c b/src/H5C.c
index cd04f7e..2a4b4cf 100644
--- a/src/H5C.c
+++ b/src/H5C.c
@@ -74,8 +74,8 @@
 /* Module Setup */
 /****************/
 
-#define H5C_PACKAGE		/*suppress error about including H5Cpkg   */
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5Cmodule.h"          /* This source code file is part of the H5C module */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 
 
 /***********/
@@ -107,6 +107,7 @@
 #define H5C_IMAGE_EXTRA_SPACE 0
 #endif /* H5C_DO_MEMORY_SANITY_CHECKS */
 
+
 /******************/
 /* Local Typedefs */
 /******************/
@@ -203,6 +204,9 @@ herr_t H5C_dump_cache_skip_list(H5C_t * cache_ptr, char * calling_fcn);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -2598,7 +2602,7 @@ H5C_protect(H5F_t *		f,
     size_t		empty_space;
     void *		thing;
     H5C_cache_entry_t *	entry_ptr;
-    void *		ret_value;      /* Return value */
+    void *		ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -8291,7 +8295,7 @@ H5C_load_entry(H5F_t *             f,
     H5C_cache_entry_t *	entry;          /* Alias for thing loaded, as cache entry */
     size_t              len;            /* Size of image in file */
     unsigned            u;              /* Local index variable */
-    void *		ret_value;      /* Return value */
+    void *		ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5CS.c b/src/H5CS.c
index 29182ce..f1d3a8b 100644
--- a/src/H5CS.c
+++ b/src/H5CS.c
@@ -30,10 +30,19 @@
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5CSprivate.h"	/* Function stack			*/
-#include "H5MMprivate.h"	/* Memory management			*/
+#include "H5Eprivate.h"		/* Error handling		  	*/
 
 #ifdef H5_HAVE_CODESTACK
 
+#define H5CS_MIN_NSLOTS	16	/* Minimum number of records in an function stack	*/
+
+/* A function stack */
+typedef struct H5CS_t {
+    unsigned	nused;		/* Number of records currently used in stack */
+    unsigned    nalloc;         /* Number of records current allocated for stack */
+    const char **rec;           /* Array of function records */
+} H5CS_t;
+
 #ifdef H5_HAVE_THREADSAFE
 /*
  * The per-thread function stack. pthread_once() initializes a special
@@ -44,8 +53,8 @@
  * In order for this macro to work, H5CS_get_my_stack() must be preceeded
  * by "H5CS_t *fstack =".
  */
-static H5CS_t *H5CS_get_stack(void);
-#define H5CS_get_my_stack()  H5CS_get_stack()
+static H5CS_t *H5CS__get_stack(void);
+#define H5CS_get_my_stack()  H5CS__get_stack()
 #else /* H5_HAVE_THREADSAFE */
 /*
  * The function stack.  Eventually we'll have some sort of global table so each
@@ -58,7 +67,7 @@ H5CS_t		H5CS_stack_g[1];
 
 #ifdef H5_HAVE_THREADSAFE
 /*-------------------------------------------------------------------------
- * Function:	H5CS_get_stack
+ * Function:	H5CS__get_stack
  *
  * Purpose:	Support function for H5CS_get_my_stack() to initialize and
  *              acquire per-thread function stack.
@@ -70,19 +79,17 @@ H5CS_t		H5CS_stack_g[1];
  * Programmer:	Quincey Koziol
  *              February 6, 2003
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static H5CS_t *
-H5CS_get_stack(void)
+H5CS__get_stack(void)
 {
     H5CS_t *fstack;
 
-    FUNC_ENTER_NOAPI_NOERR_NOFS
+    FUNC_ENTER_STATIC_NOERR_NOFS
 
     fstack = H5TS_get_thread_local_value(H5TS_funcstk_key_g);
-    if (!fstack) {
+    if(!fstack) {
         /* No associated value with current thread - create one */
 #ifdef H5_HAVE_WIN_THREADS
         fstack = (H5CS_t *)LocalAlloc(LPTR, sizeof(H5CS_t)); /* Win32 has to use LocalAlloc to match the LocalFree in DllMain */
@@ -92,17 +99,19 @@ H5CS_get_stack(void)
         HDassert(fstack);
 
         /* Set the thread-specific info */
-        fstack->nused=0;
+        fstack->nused = 0;
+        fstack->nalloc = 0;
+        fstack->rec = NULL;
 
         /* (It's not necessary to release this in this API, it is
          *      released by the "key destructor" set up in the H5TS
          *      routines.  See calls to pthread_key_create() in H5TS.c -QAK)
          */
         H5TS_set_thread_local_value(H5TS_funcstk_key_g, (void *)fstack);
-    }
+    } /* end if */
 
-    FUNC_LEAVE_NOAPI_NOFS(fstack);
-} /* end H5CS_get_stack() */
+    FUNC_LEAVE_NOAPI_NOFS(fstack)
+} /* end H5CS__get_stack() */
 #endif  /* H5_HAVE_THREADSAFE */
 
 
@@ -133,59 +142,28 @@ H5CS_print_stack(const H5CS_t *fstack, FILE *stream)
     HDassert(fstack);
 
     /* Default to outputting information to stderr */
-    if (!stream)
+    if(!stream)
         stream = stderr;
 
-    HDfprintf (stream, "HDF5-DIAG: Function stack from %s ", H5_lib_vers_info_g);
+    HDfprintf(stream, "HDF5-DIAG: Function stack from %s ", H5_lib_vers_info_g);
     /* try show the process or thread id in multiple processes cases*/
 #ifdef H5_HAVE_THREADSAFE
-    HDfprintf (stream, "thread %lu.", HDpthread_self_ulong());
+    HDfprintf(stream, "thread %lu.", HDpthread_self_ulong());
 #else  /* H5_HAVE_THREADSAFE */
-    HDfprintf (stream, "thread 0.");
+    HDfprintf(stream, "thread 0.");
 #endif  /* H5_HAVE_THREADSAFE */
-    if (fstack && fstack->nused>0)
-        HDfprintf (stream, "  Back trace follows.");
-    HDfputc ('\n', stream);
+    if(fstack && fstack->nused>0)
+        HDfprintf(stream, "  Back trace follows.");
+    HDfputc('\n', stream);
 
-    for (i=fstack->nused-1; i>=0; --i)
-        HDfprintf(stream, "%*s#%03d: Routine: %s\n", indent, "", i, fstack->slot[i]);
+    for(i = fstack->nused - 1; i >= 0; --i)
+        HDfprintf(stream, "%*s#%03d: Routine: %s\n", indent, "", i, fstack->rec[i]);
 
-    FUNC_LEAVE_NOAPI_NOFS(SUCCEED);
+    FUNC_LEAVE_NOAPI_NOFS(SUCCEED)
 } /* end H5CS_print_stack() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5CS_print
- *
- * Purpose:	Prints the default function stack in some default way.
- *
- * Return:	Non-negative on success/Negative on failure
- *
- * Programmer:	Quincey Koziol
- *              Thursday, February 6, 2003
- *
- * Modifications:
- *
- *-------------------------------------------------------------------------
- */
-herr_t
-H5CS_print(FILE *stream)
-{
-    H5CS_t	*fstack = H5CS_get_my_stack (); /* Get the correct function stack */
-
-    /* Don't push this function on the function stack... :-) */
-    FUNC_ENTER_NOAPI_NOERR_NOFS
-
-    /* Sanity check */
-    HDassert(fstack);
-
-    H5CS_print_stack(fstack, stream);
-
-    FUNC_LEAVE_NOAPI_NOFS(SUCCEED);
-} /* end H5CS_print() */
-
-
-/*-------------------------------------------------------------------------
  * Function:	H5CS_push
  *
  * Purpose:	Pushes a new record onto function stack for the current
@@ -196,30 +174,37 @@ H5CS_print(FILE *stream)
  * Programmer:	Quincey Koziol
  *		Thursday, February 6, 2003
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 herr_t
 H5CS_push(const char *func_name)
 {
-    H5CS_t	*fstack = H5CS_get_my_stack ();
+    H5CS_t *fstack = H5CS_get_my_stack();       /* Current function stack for library */
 
     /* Don't push this function on the function stack... :-) */
     FUNC_ENTER_NOAPI_NOERR_NOFS
 
     /* Sanity check */
     HDassert(fstack);
+    HDassert(fstack->nused <= fstack->nalloc);
     HDassert(func_name);
 
-    /*
-     * Push the function if there's room.  Otherwise just increment count
-     */
-    if (fstack->nused<H5CS_NSLOTS)
-	fstack->slot[fstack->nused] = func_name;
+    /* Check if we need to expand the stack of records */
+    if(fstack->nused == fstack->nalloc) {
+        size_t na = MAX((fstack->nalloc * 2), H5CS_MIN_NSLOTS);
+        const char **x = (const char **)HDrealloc(fstack->rec, na * sizeof(const char *));
+
+        /* (Avoid returning an error from this routine, currently -QAK) */
+        HDassert(x);
+        fstack->rec = x;
+        fstack->nalloc = na;
+    } /* end if */
+
+    /* Push the function name */
+    fstack->rec[fstack->nused] = func_name;
     fstack->nused++;
 
-    FUNC_LEAVE_NOAPI_NOFS(SUCCEED);
+    FUNC_LEAVE_NOAPI_NOFS(SUCCEED)
 } /* end H5CS_push() */
 
 
@@ -240,14 +225,14 @@ H5CS_push(const char *func_name)
 herr_t
 H5CS_pop(void)
 {
-    H5CS_t	*fstack = H5CS_get_my_stack ();
+    H5CS_t	*fstack = H5CS_get_my_stack();
 
     /* Don't push this function on the function stack... :-) */
     FUNC_ENTER_NOAPI_NOERR_NOFS
 
     /* Sanity check */
     HDassert(fstack);
-    HDassert(fstack->nused>0);
+    HDassert(fstack->nused > 0);
 
     /* Pop the function. */
     fstack->nused--;
@@ -266,43 +251,52 @@ H5CS_pop(void)
  * Programmer:	Quincey Koziol
  *		Tuesday, August 9, 2005
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
-herr_t
-H5CS_copy_stack(H5CS_t *new_stack)
+H5CS_t *
+H5CS_copy_stack(void)
 {
-    H5CS_t	*old_stack = H5CS_get_my_stack ();
+    H5CS_t	*old_stack = H5CS_get_my_stack();       /* Existing function stack for library */
+    H5CS_t	*new_stack;             /* New function stack, for copy */
     unsigned    u;                      /* Local index variable */
+    H5CS_t	*ret_value = NULL;      /* Return value */
 
     /* Don't push this function on the function stack... :-) */
-    FUNC_ENTER_NOAPI_NOERR_NOFS
+    FUNC_ENTER_NOAPI_NOFS
 
     /* Sanity check */
     HDassert(old_stack);
 
+    /* Allocate a new stack */
+    /* (Don't use library allocate code, since this code stack supports it) */
+    if(NULL == (new_stack = HDcalloc(1, sizeof(H5CS_t))))
+        HGOTO_ERROR(H5E_RESOURCE, H5E_CANTALLOC, NULL, "can't allocate function stack")
+    if(NULL == (new_stack->rec = HDcalloc(old_stack->nused, sizeof(const char *))))
+        HGOTO_ERROR(H5E_RESOURCE, H5E_CANTALLOC, NULL, "can't allocate function stack records")
+
     /* Copy old stack to new one, duplicating the strings */
     for(u = 0; u < old_stack->nused; u++)
-        new_stack->slot[u] = H5MM_strdup(old_stack->slot[u]);
-    new_stack->nused = old_stack->nused;
+        new_stack->rec[u] = HDstrdup(old_stack->rec[u]);
+    new_stack->nused = new_stack->nalloc = old_stack->nused;
 
-    FUNC_LEAVE_NOAPI_NOFS(SUCCEED);
+    /* Set the return value */
+    ret_value = new_stack;
+
+done:
+    FUNC_LEAVE_NOAPI_NOFS(ret_value)
 } /* end H5CS_copy_stack() */
 
 
 /*-------------------------------------------------------------------------
  * Function:	H5CS_close_stack
  *
- * Purpose:	Closes a copy of a stack
+ * Purpose:	Closes and frees a copy of a stack
  *
  * Return:	Non-negative on success/Negative on failure
  *
  * Programmer:	Quincey Koziol
  *		Tuesday, August 9, 2005
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 herr_t
@@ -316,11 +310,20 @@ H5CS_close_stack(H5CS_t *stack)
     /* Sanity check */
     HDassert(stack);
 
-    /* Free strings on stack */
-    for(u = 0; u < stack->nused; u++)
-        stack->slot[u] = H5MM_xfree((void *)stack->slot[u]);
-
-    FUNC_LEAVE_NOAPI_NOFS(SUCCEED);
+    /* Free stack */
+    for(u = 0; u < stack->nused; u++) {
+        if(stack->rec[u])
+            HDfree((void *)stack->rec[u]);
+        stack->rec[u] = NULL;
+    } /* end for */
+    if(stack->rec) {
+        HDfree(stack->rec);
+        stack->rec = NULL;
+    } /* end if */
+    if(stack)
+        HDfree(stack);
+
+    FUNC_LEAVE_NOAPI_NOFS(SUCCEED)
 } /* end H5CS_close_stack() */
 
 #endif /* H5_HAVE_CODESTACK */
diff --git a/src/H5CSprivate.h b/src/H5CSprivate.h
index 13f3b66..ab7f993 100644
--- a/src/H5CSprivate.h
+++ b/src/H5CSprivate.h
@@ -26,19 +26,13 @@
 /* Private headers needed by this file */
 #include "H5private.h"
 
-#define H5CS_NSLOTS	48	/*number of slots in an function stack	     */
-
-/* A function stack */
-typedef struct H5CS_t {
-    unsigned	nused;			        /*num slots currently used in stack  */
-    const char *slot[H5CS_NSLOTS];	/*array of function records	     */
-} H5CS_t;
-
-H5_DLL herr_t H5CS_push (const char *func_name);
-H5_DLL herr_t H5CS_pop (void);
-H5_DLL herr_t H5CS_print (FILE *stream);
-H5_DLL herr_t H5CS_print_stack (const H5CS_t *stack, FILE *stream);
-H5_DLL herr_t H5CS_copy_stack (H5CS_t *stack);
-H5_DLL herr_t H5CS_close_stack (H5CS_t *stack);
+/* Forward declarations for structure fields */
+struct H5CS_t;
+H5_DLL herr_t H5CS_push(const char *func_name);
+H5_DLL herr_t H5CS_pop(void);
+H5_DLL herr_t H5CS_print_stack(const struct H5CS_t *stack, FILE *stream);
+H5_DLL struct H5CS_t *H5CS_copy_stack(void);
+H5_DLL herr_t H5CS_close_stack(struct H5CS_t *stack);
 
 #endif /* _H5CSprivate_H */
+
diff --git a/src/H5Cmodule.h b/src/H5Cmodule.h
new file mode 100644
index 0000000..2c39eab
--- /dev/null
+++ b/src/H5Cmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5C package.  Including this header means that the source file
+ *		is part of the H5C package.
+ */
+#ifndef _H5Cmodule_H
+#define _H5Cmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5C_MODULE
+#define H5_MY_PKG       H5C
+#define H5_MY_PKG_ERR   H5E_CACHE
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5Cmodule_H */
+
diff --git a/src/H5Cmpio.c b/src/H5Cmpio.c
index ec34285..6b63ad5 100644
--- a/src/H5Cmpio.c
+++ b/src/H5Cmpio.c
@@ -29,8 +29,8 @@
 /* Module Setup */
 /****************/
 
-#define H5C_PACKAGE		/*suppress error about including H5Cpkg   */
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5Cmodule.h"          /* This source code file is part of the H5C module */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 
 
 /***********/
diff --git a/src/H5Cpkg.h b/src/H5Cpkg.h
index ea965fd..6ef2c96 100644
--- a/src/H5Cpkg.h
+++ b/src/H5Cpkg.h
@@ -28,7 +28,7 @@
  *		reason why this file was created.
  */
 
-#ifndef H5C_PACKAGE
+#if !(defined H5C_FRIEND || defined H5C_MODULE)
 #error "Do not include this file outside the H5C package!"
 #endif
 
@@ -836,7 +836,7 @@ if ( ( (entry_ptr) == NULL ) ||                                                \
 
 #define H5C__HASH_MASK		((size_t)(H5C__HASH_TABLE_LEN - 1) << 3)
 
-#define H5C__HASH_FCN(x)	(int)(((x) & H5C__HASH_MASK) >> 3)
+#define H5C__HASH_FCN(x)	(int)((unsigned)((x) & H5C__HASH_MASK) >> 3)
 
 #if H5C_DO_SANITY_CHECKS
 
diff --git a/src/H5D.c b/src/H5D.c
index 6183ec5..1ffee94 100644
--- a/src/H5D.c
+++ b/src/H5D.c
@@ -17,10 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5D__init_pub_interface
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -52,6 +49,9 @@
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Declare extern the free list to manage blocks of VL data */
 H5FL_BLK_EXTERN(vlen_vl_buf);
 
@@ -73,51 +73,6 @@ H5FL_BLK_EXTERN(type_conv);
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5D__init_pub_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5D__init_pub_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5D_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5D__init_pub_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5D_init())
-} /* H5D__init_pub_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5D__term_pub_interface -- Terminate interface
-USAGE
-    herr_t H5D__term_pub_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5D__term_pub_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5D__term_pub_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5Dcreate2
  *
diff --git a/src/H5Dbtree.c b/src/H5Dbtree.c
index a4009a9..762c252 100644
--- a/src/H5Dbtree.c
+++ b/src/H5Dbtree.c
@@ -26,7 +26,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -331,7 +331,7 @@ H5D__btree_cmp2(void *_lt_key, void *_udata, void *_rt_key)
     H5D_btree_key_t	*lt_key = (H5D_btree_key_t *) _lt_key;
     H5D_btree_key_t	*rt_key = (H5D_btree_key_t *) _rt_key;
     H5D_chunk_common_ud_t	*udata = (H5D_chunk_common_ud_t *) _udata;
-    int		ret_value;
+    int ret_value = -1;         /* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -553,7 +553,7 @@ H5D__btree_insert(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, haddr_t addr, void *_l
     H5D_chunk_ud_t	*udata = (H5D_chunk_ud_t *) _udata;
     int		cmp;
     unsigned		u;
-    H5B_ins_t		ret_value;
+    H5B_ins_t		ret_value = H5B_INS_ERROR;      /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -969,7 +969,7 @@ done:
 static hbool_t
 H5D__btree_idx_is_space_alloc(const H5O_storage_chunk_t *storage)
 {
-    hbool_t ret_value;          /* Return value */
+    hbool_t ret_value = FALSE;          /* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -1085,7 +1085,7 @@ H5D__btree_idx_iterate_cb(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id,
     H5D_btree_it_ud_t	*udata = (H5D_btree_it_ud_t *)_udata; /* User data */
     const H5D_btree_key_t	*lt_key = (const H5D_btree_key_t *)_lt_key; /* B-tree key for chunk */
     H5D_chunk_rec_t chunk_rec;  /* Generic chunk record for callback */
-    int ret_value;              /* Return value */
+    int ret_value = -1;         /* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -1127,7 +1127,7 @@ H5D__btree_idx_iterate(const H5D_chk_idx_info_t *idx_info,
     H5D_chunk_cb_func_t chunk_cb, void *chunk_udata)
 {
     H5D_btree_it_ud_t	udata;  /* User data for B-tree iterator callback */
-    int ret_value;              /* Return value */
+    int ret_value = -1;         /* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
diff --git a/src/H5Dchunk.c b/src/H5Dchunk.c
index 8584d0a..1987b40 100644
--- a/src/H5Dchunk.c
+++ b/src/H5Dchunk.c
@@ -44,7 +44,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -205,6 +205,7 @@ static herr_t H5D__chunk_write(H5D_io_info_t *io_info, const H5D_type_info_t *ty
     H5D_chunk_map_t *fm);
 static herr_t H5D__chunk_flush(H5D_t *dset, hid_t dxpl_id);
 static herr_t H5D__chunk_io_term(const H5D_chunk_map_t *fm);
+static herr_t H5D__chunk_dest(H5D_t *dset, hid_t dxpl_id);
 
 /* "Nonexistent" layout operation callback */
 static ssize_t
@@ -268,7 +269,8 @@ const H5D_layout_ops_t H5D_LOPS_CHUNK[1] = {{
     NULL,
     NULL,
     H5D__chunk_flush,
-    H5D__chunk_io_term
+    H5D__chunk_io_term,
+    H5D__chunk_dest
 }};
 
 
@@ -291,6 +293,7 @@ const H5D_layout_ops_t H5D_LOPS_NONEXISTENT[1] = {{
     H5D__nonexistent_readvv,
     NULL,
     NULL,
+    NULL,
     NULL
 }};
 
@@ -683,7 +686,7 @@ done:
 hbool_t
 H5D__chunk_is_space_alloc(const H5O_storage_t *storage)
 {
-    hbool_t ret_value;                  /* Return value */
+    hbool_t ret_value = FALSE;          /* Return value */
 
     FUNC_ENTER_PACKAGE_NOERR
 
@@ -2190,6 +2193,72 @@ done:
 
 
 /*-------------------------------------------------------------------------
+ * Function:	H5D__chunk_dest
+ *
+ * Purpose:	Destroy the entire chunk cache by flushing dirty entries,
+ *		preempting all entries, and freeing the cache itself.
+ *
+ * Return:	Non-negative on success/Negative on failure
+ *
+ * Programmer:	Robb Matzke
+ *              Thursday, May 21, 1998
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5D__chunk_dest(H5D_t *dset, hid_t dxpl_id)
+{
+    H5D_chk_idx_info_t idx_info;        /* Chunked index info */
+    H5D_dxpl_cache_t _dxpl_cache;       /* Data transfer property cache buffer */
+    H5D_dxpl_cache_t *dxpl_cache = &_dxpl_cache;   /* Data transfer property cache */
+    H5D_rdcc_t	*rdcc = &(dset->shared->cache.chunk);   /* Dataset's chunk cache */
+    H5D_rdcc_ent_t	*ent = NULL, *next = NULL;      /* Pointer to current & next cache entries */
+    int		nerrors = 0;            /* Accumulated count of errors */
+    herr_t      ret_value = SUCCEED;       /* Return value */
+
+    FUNC_ENTER_STATIC_TAG(dxpl_id, dset->oloc.addr, FAIL)
+
+    /* Sanity check */
+    HDassert(dset);
+
+    /* Fill the DXPL cache values for later use */
+    if(H5D__get_dxpl_cache(dxpl_id, &dxpl_cache) < 0)
+        nerrors++;
+
+    /* Flush all the cached chunks */
+    for(ent = rdcc->head; ent; ent = next) {
+	next = ent->next;
+	if(H5D__chunk_cache_evict(dset, dxpl_id, dxpl_cache, ent, TRUE) < 0)
+	    nerrors++;
+    } /* end for */
+    
+    /* Continue even if there are failures. */
+    if(nerrors)
+	HDONE_ERROR(H5E_IO, H5E_CANTFLUSH, FAIL, "unable to flush one or more raw data chunks")
+
+    /* Release cache structures */
+    if(rdcc->slot)
+        rdcc->slot = H5FL_SEQ_FREE(H5D_rdcc_ent_ptr_t, rdcc->slot);
+    HDmemset(rdcc, 0, sizeof(H5D_rdcc_t));
+
+    /* Compose chunked index info struct */
+    idx_info.f = dset->oloc.file;
+    idx_info.dxpl_id = dxpl_id;
+    idx_info.pline = &dset->shared->dcpl_cache.pline;
+    idx_info.layout = &dset->shared->layout.u.chunk;
+    idx_info.storage = &dset->shared->layout.storage.u.chunk;
+
+    /* Free any index structures */
+    if(dset->shared->layout.storage.u.chunk.ops->dest &&
+            (dset->shared->layout.storage.u.chunk.ops->dest)(&idx_info) < 0)
+	HGOTO_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "unable to release chunk index info")
+
+done:
+    FUNC_LEAVE_NOAPI_TAG(ret_value, FAIL)
+} /* end H5D__chunk_dest() */
+
+
+/*-------------------------------------------------------------------------
  * Function:	H5D_chunk_idx_reset
  *
  * Purpose:	Reset index information
@@ -2401,7 +2470,7 @@ H5D__chunk_hash_val(const H5D_shared_t *shared, const hsize_t *scaled)
 {
     hsize_t val;        /* Intermediate value */
     unsigned ndims = shared->ndims;      /* Rank of dataset */
-    unsigned ret;       /* Value to return */
+    unsigned ret = 0;   /* Value to return */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -2894,7 +2963,7 @@ H5D__chunk_lock(const H5D_io_info_t *io_info, H5D_chunk_ud_t *udata,
     H5D_rdcc_ent_t	*ent;		        /*cache entry		*/
     size_t		chunk_size;		/*size of a chunk	*/
     void		*chunk = NULL;		/*the file chunk	*/
-    void		*ret_value;	        /*return value		*/
+    void		*ret_value = NULL;	/* Return value         */
 
     FUNC_ENTER_PACKAGE
 
@@ -5158,72 +5227,6 @@ done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5D__chunk_dump_index() */
 
-
-/*-------------------------------------------------------------------------
- * Function:	H5D__chunk_dest
- *
- * Purpose:	Destroy the entire chunk cache by flushing dirty entries,
- *		preempting all entries, and freeing the cache itself.
- *
- * Return:	Non-negative on success/Negative on failure
- *
- * Programmer:	Robb Matzke
- *              Thursday, May 21, 1998
- *
- *-------------------------------------------------------------------------
- */
-herr_t
-H5D__chunk_dest(H5F_t *f, hid_t dxpl_id, H5D_t *dset)
-{
-    H5D_chk_idx_info_t idx_info;        /* Chunked index info */
-    H5D_dxpl_cache_t _dxpl_cache;       /* Data transfer property cache buffer */
-    H5D_dxpl_cache_t *dxpl_cache = &_dxpl_cache;   /* Data transfer property cache */
-    H5D_rdcc_t	*rdcc = &(dset->shared->cache.chunk);   /* Dataset's chunk cache */
-    H5D_rdcc_ent_t	*ent = NULL, *next = NULL;      /* Pointer to current & next cache entries */
-    int		nerrors = 0;            /* Accumulated count of errors */
-    herr_t      ret_value = SUCCEED;       /* Return value */
-
-    FUNC_ENTER_PACKAGE_TAG(dxpl_id, dset->oloc.addr, FAIL)
-
-    HDassert(f);
-    HDassert(dset);
-
-    /* Fill the DXPL cache values for later use */
-    if(H5D__get_dxpl_cache(dxpl_id, &dxpl_cache) < 0)
-        HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't fill dxpl cache")
-
-    /* Flush all the cached chunks */
-    for(ent = rdcc->head; ent; ent = next) {
-	next = ent->next;
-	if(H5D__chunk_cache_evict(dset, dxpl_id, dxpl_cache, ent, TRUE) < 0)
-	    nerrors++;
-    } /* end for */
-    
-    /* Continue even if there are failures. */
-    if(nerrors)
-	HDONE_ERROR(H5E_IO, H5E_CANTFLUSH, FAIL, "unable to flush one or more raw data chunks")
-
-    /* Release cache structures */
-    if(rdcc->slot)
-        rdcc->slot = H5FL_SEQ_FREE(H5D_rdcc_ent_ptr_t, rdcc->slot);
-    HDmemset(rdcc, 0, sizeof(H5D_rdcc_t));
-
-    /* Compose chunked index info struct */
-    idx_info.f = f;
-    idx_info.dxpl_id = dxpl_id;
-    idx_info.pline = &dset->shared->dcpl_cache.pline;
-    idx_info.layout = &dset->shared->layout.u.chunk;
-    idx_info.storage = &dset->shared->layout.storage.u.chunk;
-
-    /* Free any index structures */
-    if(dset->shared->layout.storage.u.chunk.ops->dest &&
-            (dset->shared->layout.storage.u.chunk.ops->dest)(&idx_info) < 0)
-	HGOTO_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "unable to release chunk index info")
-
-done:
-    FUNC_LEAVE_NOAPI_TAG(ret_value, FAIL)
-} /* end H5D__chunk_dest() */
-
 #ifdef H5D_CHUNK_DEBUG
 
 /*-------------------------------------------------------------------------
@@ -5364,7 +5367,7 @@ H5D__nonexistent_readvv(const H5D_io_info_t *io_info,
     size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_off_arr[])
 {
     H5D_chunk_readvv_ud_t udata;        /* User data for H5VM_opvv() operator */
-    ssize_t ret_value;                  /* Return value */
+    ssize_t ret_value = -1;             /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5Dcompact.c b/src/H5Dcompact.c
index acb4541..ebe75bd 100644
--- a/src/H5Dcompact.c
+++ b/src/H5Dcompact.c
@@ -25,7 +25,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE             /*suppress error about including H5Dpkg   */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -70,6 +70,7 @@ static ssize_t H5D__compact_writevv(const H5D_io_info_t *io_info,
     size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_size_arr[], hsize_t dset_offset_arr[],
     size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_size_arr[], hsize_t mem_offset_arr[]);
 static herr_t H5D__compact_flush(H5D_t *dset, hid_t dxpl_id);
+static herr_t H5D__compact_dest(H5D_t *dset, hid_t dxpl_id);
 
 
 /*********************/
@@ -91,7 +92,8 @@ const H5D_layout_ops_t H5D_LOPS_COMPACT[1] = {{
     H5D__compact_readvv,
     H5D__compact_writevv,
     H5D__compact_flush,
-    NULL
+    NULL,
+    H5D__compact_dest
 }};
 
 
@@ -285,7 +287,7 @@ H5D__compact_readvv(const H5D_io_info_t *io_info,
     size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_size_arr[], hsize_t dset_offset_arr[],
     size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_size_arr[], hsize_t mem_offset_arr[])
 {
-    ssize_t ret_value;                  /* Return value */
+    ssize_t ret_value = -1;     /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -326,7 +328,7 @@ H5D__compact_writevv(const H5D_io_info_t *io_info,
     size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_size_arr[], hsize_t dset_offset_arr[],
     size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_size_arr[], hsize_t mem_offset_arr[])
 {
-    ssize_t ret_value;                  /* Return value */
+    ssize_t ret_value = -1;             /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -379,6 +381,33 @@ done:
 
 
 /*-------------------------------------------------------------------------
+ * Function:	H5D__compact_dest
+ *
+ * Purpose:	Free the compact buffer
+ *
+ * Return:	Non-negative on success/Negative on failure
+ *
+ * Programmer:	Quincey Koziol
+ *              Thursday, Sept 3, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5D__compact_dest(H5D_t *dset, hid_t H5_ATTR_UNUSED dxpl_id)
+{
+    FUNC_ENTER_STATIC_NOERR
+
+    /* Sanity check */
+    HDassert(dset);
+
+    /* Free the buffer for the raw data for compact datasets */
+    dset->shared->layout.storage.u.compact.buf = H5MM_xfree(dset->shared->layout.storage.u.compact.buf);
+
+    FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5D__compact_dest() */
+
+
+/*-------------------------------------------------------------------------
  * Function:    H5D__compact_copy
  *
  * Purpose:     Copy compact storage raw data from SRC file to DST file.
diff --git a/src/H5Dcontig.c b/src/H5Dcontig.c
index fb3ac85..988bb61 100644
--- a/src/H5Dcontig.c
+++ b/src/H5Dcontig.c
@@ -27,7 +27,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -133,6 +133,7 @@ const H5D_layout_ops_t H5D_LOPS_CONTIG[1] = {{
     H5D__contig_readvv,
     H5D__contig_writevv,
     H5D__contig_flush,
+    NULL,
     NULL
 }};
 
@@ -466,7 +467,8 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5D__contig_init(H5F_t *f, hid_t dxpl_id, const H5D_t *dset, hid_t dapl_id)
+H5D__contig_init(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id,
+    const H5D_t *dset, hid_t H5_ATTR_UNUSED dapl_id)
 {
     hsize_t tmp_size;                   /* Temporary holder for raw data size */
     size_t tmp_sieve_buf_size;          /* Temporary holder for sieve buffer size */
@@ -539,7 +541,7 @@ done:
 hbool_t
 H5D__contig_is_space_alloc(const H5O_storage_t *storage)
 {
-    hbool_t ret_value;                  /* Return value */
+    hbool_t ret_value = FALSE;          /* Return value */
 
     FUNC_ENTER_PACKAGE_NOERR
 
@@ -917,7 +919,7 @@ H5D__contig_readvv(const H5D_io_info_t *io_info,
     size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_len_arr[], hsize_t dset_off_arr[],
     size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_off_arr[])
 {
-    ssize_t ret_value;          /* Return value */
+    ssize_t ret_value = -1;     /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -1244,7 +1246,7 @@ H5D__contig_writevv(const H5D_io_info_t *io_info,
     size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_len_arr[], hsize_t dset_off_arr[],
     size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_off_arr[])
 {
-    ssize_t ret_value;          /* Return value (Size of sequence in bytes) */
+    ssize_t ret_value = -1;             /* Return value (Size of sequence in bytes) */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5Ddbg.c b/src/H5Ddbg.c
index 4e934f2..34e0ae9 100644
--- a/src/H5Ddbg.c
+++ b/src/H5Ddbg.c
@@ -17,10 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5D__init_dbg_interface
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -61,26 +58,6 @@
 /* Local Variables */
 /*******************/
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5D__init_dbg_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5D__init_dbg_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5D_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5D__init_dbg_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5D_init())
-} /* H5D__init_dbg_interface() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Ddeprec.c b/src/H5Ddeprec.c
index cd2bc84..5a2b355 100644
--- a/src/H5Ddeprec.c
+++ b/src/H5Ddeprec.c
@@ -31,10 +31,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5D__init_deprec_interface
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -85,51 +82,6 @@ static herr_t H5D__extend(H5D_t *dataset, const hsize_t *size, hid_t dxpl_id);
 /*******************/
 
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5D__init_deprec_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5D__init_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5D_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5D__init_deprec_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5D_init())
-} /* H5D__init_deprec_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5D__term_deprec_interface -- Terminate interface
-USAGE
-    herr_t H5D__term_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5D__term_deprec_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5D__term_deprec_interface() */
-
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Defl.c b/src/H5Defl.c
index 9e5872a..ec96ae7 100644
--- a/src/H5Defl.c
+++ b/src/H5Defl.c
@@ -22,7 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -100,6 +100,7 @@ const H5D_layout_ops_t H5D_LOPS_EFL[1] = {{
     H5D__efl_readvv,
     H5D__efl_writevv,
     NULL,
+    NULL,
     NULL
 }};
 
@@ -455,7 +456,7 @@ H5D__efl_readvv(const H5D_io_info_t *io_info,
     size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_off_arr[])
 {
     H5D_efl_readvv_ud_t udata;  /* User data for H5VM_opvv() operator */
-    ssize_t ret_value;          /* Return value (Total size of sequence in bytes) */
+    ssize_t ret_value = -1;     /* Return value (Total size of sequence in bytes) */
 
     FUNC_ENTER_STATIC
 
@@ -535,7 +536,7 @@ H5D__efl_writevv(const H5D_io_info_t *io_info,
     size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_off_arr[])
 {
     H5D_efl_writevv_ud_t udata;  /* User data for H5VM_opvv() operator */
-    ssize_t ret_value;          /* Return value (Total size of sequence in bytes) */
+    ssize_t ret_value = -1;      /* Return value (Total size of sequence in bytes) */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5Dfill.c b/src/H5Dfill.c
index 484c362..947a177 100644
--- a/src/H5Dfill.c
+++ b/src/H5Dfill.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
+
 
 /***********/
 /* Headers */
diff --git a/src/H5Dint.c b/src/H5Dint.c
index 6de8da9..49075d9 100644
--- a/src/H5Dint.c
+++ b/src/H5Dint.c
@@ -17,10 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5D__init_interface
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -118,6 +115,9 @@ static const H5I_class_t H5I_DATASET_CLS[1] = {{
     (H5I_free_t)H5D_close       /* Callback routine for closing objects of this class */
 }};
 
+/* Flag indicating "top" of interface has been initialized */
+static hbool_t H5D_top_package_initialize_s = FALSE;
+
 
 
 /*-------------------------------------------------------------------------
@@ -149,9 +149,9 @@ done:
 
 /*--------------------------------------------------------------------------
 NAME
-   H5D__init_interface -- Initialize interface-specific information
+   H5D__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5D__init_interface()
+    herr_t H5D__init_package()
 
 RETURNS
     Non-negative on success/Negative on failure
@@ -162,13 +162,13 @@ NOTES
     a deadlock in the library when the library is attempting to terminate -QAK
 
 --------------------------------------------------------------------------*/
-static herr_t
-H5D__init_interface(void)
+herr_t
+H5D__init_package(void)
 {
-    H5P_genplist_t *def_dcpl;               /* Default Dataset Creation Property list */
-    herr_t          ret_value                = SUCCEED;   /* Return value */
+    H5P_genplist_t *def_dcpl;           /* Default Dataset Creation Property list */
+    herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_STATIC
+    FUNC_ENTER_PACKAGE
 
     /* Initialize the atom group for the dataset IDs */
     if(H5I_register_type(H5I_DATASET_CLS) < 0)
@@ -202,34 +202,36 @@ H5D__init_interface(void)
     if(H5D__get_dxpl_cache_real(H5P_DATASET_XFER_DEFAULT, &H5D_def_dxpl_cache) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't retrieve default DXPL info")
 
+    /* Mark "top" of interface as initialized, too */
+    H5D_top_package_initialize_s = TRUE;
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5D__init_interface() */
+} /* end H5D__init_package() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5D_term_interface
+ * Function:	H5D_top_term_package
  *
- * Purpose:	Terminate this interface.
+ * Purpose:	Close the "top" of the interface, releasing IDs, etc.
  *
  * Return:	Success:	Positive if anything was done that might
  *				affect other interfaces; zero otherwise.
- *
  * 		Failure:	Negative.
  *
- * Programmer:	Robb Matzke
- *              Friday, November 20, 1998
+ * Programmer:	Quincey Koziol
+ *              Sunday, September 13, 2015
  *
  *-------------------------------------------------------------------------
  */
 int
-H5D_term_interface(void)
+H5D_top_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5D_top_package_initialize_s) {
 	if(H5I_nmembers(H5I_DATASET) > 0) {
             /* The dataset API uses the "force" flag set to true because it
              * is using the "file objects" (H5FO) API functions to track open
@@ -256,24 +258,55 @@ H5D_term_interface(void)
 	    (void)H5I_clear_type(H5I_DATASET, TRUE, FALSE);
             n++; /*H5I*/
 	} /* end if */
-        else {
-            /* Close public interface */
-            n += H5D__term_pub_interface();
 
-            /* Close deprecated interface */
-            n += H5D__term_deprec_interface();
+        /* Mark closed */
+        if(0 == n)
+            H5D_top_package_initialize_s = FALSE;
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(n)
+} /* end H5D_top_term_package() */
 
-	    /* Destroy the dataset object id group */
-	    (void)H5I_dec_type_ref(H5I_DATASET);
-            n++; /*H5I*/
+
+/*-------------------------------------------------------------------------
+ * Function:	H5D_term_package
+ *
+ * Purpose:	Terminate this interface.
+ *
+ * Note:	Finishes shutting down the interface, after
+ *		H5D_top_term_package() is called
+ *
+ * Return:	Success:	Positive if anything was done that might
+ *				affect other interfaces; zero otherwise.
+ * 		Failure:	Negative.
+ *
+ * Programmer:	Robb Matzke
+ *              Friday, November 20, 1998
+ *
+ *-------------------------------------------------------------------------
+ */
+int
+H5D_term_package(void)
+{
+    int	n = 0;
+
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+    if(H5_PKG_INIT_VAR) {
+        /* Sanity checks */
+        HDassert(0 == H5I_nmembers(H5I_DATASET));
+        HDassert(FALSE == H5D_top_package_initialize_s);
 
-	    /* Mark closed */
-	    H5_interface_initialize_g = 0;
-	} /* end else */
+        /* Destroy the dataset object id group */
+        n += (H5I_dec_type_ref(H5I_DATASET) > 0);
+
+        /* Mark closed */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5D_term_interface() */
+} /* end H5D_term_package() */
 
 
 /*--------------------------------------------------------------------------
@@ -350,8 +383,11 @@ H5D__get_dxpl_cache_real(hid_t dxpl_id, H5D_dxpl_cache_t *cache)
     if(H5P_get(dx_plist, H5D_XFER_FILTER_CB_NAME, &cache->filter_cb) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "Can't retrieve filter callback function")
 
-    /* Get the data transform property */
-    if(H5P_get(dx_plist, H5D_XFER_XFORM_NAME, &cache->data_xform_prop) < 0)
+    /* Look at the data transform property */
+    /* (Note: 'peek', not 'get' - if this turns out to be a problem, we should
+     *          add a H5D__free_dxpl_cache() routine. -QAK)
+     */
+    if(H5P_peek(dx_plist, H5D_XFER_XFORM_NAME, &cache->data_xform_prop) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "Can't retrieve data transform info")
 
 done:
@@ -424,7 +460,7 @@ H5D__create_named(const H5G_loc_t *loc, const char *name, hid_t type_id,
 {
     H5O_obj_create_t ocrt_info;         /* Information for object creation */
     H5D_obj_create_t dcrt_info;         /* Information for dataset creation */
-    H5D_t	   *ret_value;          /* Return value */
+    H5D_t	   *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -549,7 +585,7 @@ H5D__new(hid_t dcpl_id, hbool_t creating, hbool_t vl_type)
 {
     H5D_shared_t    *new_dset = NULL;   /* New dataset object */
     H5P_genplist_t  *plist;             /* Property list created */
-    H5D_shared_t    *ret_value;         /* Return value */
+    H5D_shared_t    *ret_value = NULL;  /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -931,12 +967,11 @@ done:
             HDONE_ERROR(H5E_DATASET, H5E_CANTUNPIN, FAIL, "unable to unpin dataset object header")
 
     /* Error cleanup */
-    if(ret_value < 0) {
-        if(dset->shared->layout.type == H5D_CHUNKED && layout_init) {
-            if(H5D__chunk_dest(file, dxpl_id, dset) < 0)
-                HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, FAIL, "unable to destroy chunk cache")
-        } /* end if */
-    } /* end if */
+    if(ret_value < 0)
+        if(layout_init)
+            /* Destroy the layout information for the dataset */
+            if(dset->shared->layout.ops->dest && (dset->shared->layout.ops->dest)(dset, dxpl_id) < 0)
+                HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, FAIL, "unable to destroy layout info")
 
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5D__update_oh_info() */
@@ -971,8 +1006,12 @@ H5D__create(H5F_t *file, hid_t type_id, const H5S_t *space, hid_t dcpl_id,
     H5P_genplist_t 	*dc_plist = NULL;       /* New Property list */
     hbool_t             has_vl_type = FALSE;    /* Flag to indicate a VL-type for dataset */
     hbool_t             layout_init = FALSE;    /* Flag to indicate that chunk information was initialized */
+    hbool_t             layout_copied = FALSE;  /* Flag to indicate that layout message was copied */
+    hbool_t             fill_copied = FALSE;    /* Flag to indicate that fill-value message was copied */
+    hbool_t             pline_copied = FALSE;   /* Flag to indicate that pipeline message was copied */
+    hbool_t             efl_copied = FALSE;     /* Flag to indicate that external file list message was copied */
     H5G_loc_t           dset_loc;               /* Dataset location */
-    H5D_t		*ret_value;             /* Return value */
+    H5D_t		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -1028,6 +1067,7 @@ H5D__create(H5F_t *file, hid_t type_id, const H5S_t *space, hid_t dcpl_id,
         H5O_layout_t    *layout;        /* Dataset's layout information */
         H5O_pline_t     *pline;         /* Dataset's I/O pipeline information */
         H5O_fill_t      *fill;          /* Dataset's fill value info */
+        H5O_efl_t       *efl;           /* Dataset's external file list info */
 
         /* Check if the filters in the DCPL can be applied to this dataset */
         if(H5Z_can_apply(new_dset->shared->dcpl_id, new_dset->shared->type_id) < 0)
@@ -1044,13 +1084,20 @@ H5D__create(H5F_t *file, hid_t type_id, const H5S_t *space, hid_t dcpl_id,
         /* Retrieve the properties we need */
         pline = &new_dset->shared->dcpl_cache.pline;
         if(H5P_get(dc_plist, H5O_CRT_PIPELINE_NAME, pline) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't retrieve pipeline filter")
+            HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, NULL, "can't retrieve pipeline filter")
+        pline_copied = TRUE;
         layout = &new_dset->shared->layout;
         if(H5P_get(dc_plist, H5D_CRT_LAYOUT_NAME, layout) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't retrieve layout")
+            HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, NULL, "can't retrieve layout")
+        layout_copied = TRUE;
         fill = &new_dset->shared->dcpl_cache.fill;
         if(H5P_get(dc_plist, H5D_CRT_FILL_VALUE_NAME, fill) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't retrieve fill value info")
+            HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, NULL, "can't retrieve fill value info")
+        fill_copied = TRUE;
+        efl = &new_dset->shared->dcpl_cache.efl;
+        if(H5P_get(dc_plist, H5D_CRT_EXT_FILE_LIST_NAME, efl) < 0)
+            HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, NULL, "can't retrieve external file list")
+        efl_copied = TRUE;
 
         /* Check that chunked layout is used if filters are enabled */
         if(pline->nused > 0 && H5D_CHUNKED != layout->type)
@@ -1067,10 +1114,6 @@ H5D__create(H5F_t *file, hid_t type_id, const H5S_t *space, hid_t dcpl_id,
         /* If MPI VFD is used, no filter support yet. */
         if(H5F_HAS_FEATURE(file, H5FD_FEAT_HAS_MPI) && pline->nused > 0)
             HGOTO_ERROR(H5E_DATASET, H5E_UNSUPPORTED, NULL, "Parallel I/O does not support filters yet")
-
-        /* Get the dataset's external file list information */
-        if(H5P_get(dc_plist, H5D_CRT_EXT_FILE_LIST_NAME, &new_dset->shared->dcpl_cache.efl) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't retrieve external file list")
     } /* end if */
 
     /* Set the latest version of the layout, pline & fill messages, if requested */
@@ -1116,10 +1159,21 @@ H5D__create(H5F_t *file, hid_t type_id, const H5S_t *space, hid_t dcpl_id,
 done:
     if(!ret_value && new_dset && new_dset->shared) {
         if(new_dset->shared) {
-            if(new_dset->shared->layout.type == H5D_CHUNKED && layout_init) {
-                if(H5D__chunk_dest(file, dxpl_id, new_dset) < 0)
-                    HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, NULL, "unable to destroy chunk cache")
-            } /* end if */
+            if(layout_init)
+                if(new_dset->shared->layout.ops->dest && (new_dset->shared->layout.ops->dest)(new_dset, dxpl_id) < 0)
+                    HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, NULL, "unable to destroy layout info")
+            if(pline_copied)
+                if(H5O_msg_reset(H5O_PLINE_ID, &new_dset->shared->dcpl_cache.pline) < 0)
+                    HDONE_ERROR(H5E_DATASET, H5E_CANTRESET, NULL, "unable to reset I/O pipeline info")
+            if(layout_copied)
+                if(H5O_msg_reset(H5O_LAYOUT_ID, &new_dset->shared->layout) < 0)
+                    HDONE_ERROR(H5E_DATASET, H5E_CANTRESET, NULL, "unable to reset layout info")
+            if(fill_copied)
+                if(H5O_msg_reset(H5O_FILL_ID, &new_dset->shared->dcpl_cache.fill) < 0)
+                    HDONE_ERROR(H5E_DATASET, H5E_CANTRESET, NULL, "unable to reset fill-value info")
+            if(efl_copied)
+                if(H5O_msg_reset(H5O_EFL_ID, &new_dset->shared->dcpl_cache.efl) < 0)
+                    HDONE_ERROR(H5E_DATASET, H5E_CANTRESET, NULL, "unable to reset external file list info")
             if(new_dset->shared->space && H5S_close(new_dset->shared->space) < 0)
                 HDONE_ERROR(H5E_DATASET, H5E_CLOSEERROR, NULL, "unable to release dataspace")
             if(new_dset->shared->type && H5I_dec_ref(new_dset->shared->type_id) < 0)
@@ -1169,7 +1223,7 @@ H5D__open_name(const H5G_loc_t *loc, const char *name, hid_t dapl_id,
     H5O_loc_t   oloc;                   /* Dataset object location */
     H5O_type_t  obj_type;               /* Type of object at location */
     hbool_t     loc_found = FALSE;      /* Location at 'name' found */
-    H5D_t       *ret_value;             /* Return value */
+    H5D_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -1229,7 +1283,7 @@ H5D_open(const H5G_loc_t *loc, hid_t dapl_id, hid_t dxpl_id)
 {
     H5D_shared_t    *shared_fo = NULL;
     H5D_t           *dataset = NULL;
-    H5D_t           *ret_value;              /* Return value */
+    H5D_t           *ret_value = NULL;          /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1454,9 +1508,9 @@ done:
         if(H5F_addr_defined(dataset->oloc.addr) && H5O_close(&(dataset->oloc)) < 0)
             HDONE_ERROR(H5E_DATASET, H5E_CLOSEERROR, FAIL, "unable to release object header")
         if(dataset->shared) {
-	    if(dataset->shared->layout.type == H5D_CHUNKED && layout_init)
-                if(H5D__chunk_dest(dataset->oloc.file, dxpl_id, dataset) < 0)
-                    HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, FAIL, "unable to destroy chunk cache")
+	    if(layout_init)
+                if(dataset->shared->layout.ops->dest && (dataset->shared->layout.ops->dest)(dataset, dxpl_id) < 0)
+                    HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, FAIL, "unable to destroy layout info")
             if(dataset->shared->space && H5S_close(dataset->shared->space) < 0)
                 HDONE_ERROR(H5E_DATASET, H5E_CLOSEERROR, FAIL, "unable to release dataspace")
             if(dataset->shared->type) {
@@ -1546,16 +1600,10 @@ H5D_close(H5D_t *dataset)
                     dataset->shared->cache.chunk.single_chunk_info = H5FL_FREE(H5D_chunk_info_t, dataset->shared->cache.chunk.single_chunk_info);
                     dataset->shared->cache.chunk.single_chunk_info = NULL;
                 } /* end if */
-
-                /* Flush and destroy chunks in the cache. Continue to close even if 
-                 * it fails. */
-                if(H5D__chunk_dest(dataset->oloc.file, H5AC_dxpl_id, dataset) < 0)
-                    HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, FAIL, "unable to destroy chunk cache")
                 break;
 
             case H5D_COMPACT:
-                /* Free the buffer for the raw data for compact datasets */
-                dataset->shared->layout.storage.u.compact.buf = H5MM_xfree(dataset->shared->layout.storage.u.compact.buf);
+                /* Nothing special to do (info freed in the layout destroy) */
                 break;
 
             case H5D_VIRTUAL:
@@ -1595,11 +1643,22 @@ H5D_close(H5D_t *dataset)
 #endif /* NDEBUG */
         } /* end switch */ /*lint !e788 All appropriate cases are covered */
 
+        /* Destroy any cached layout information for the dataset */
+        if(dataset->shared->layout.ops->dest && (dataset->shared->layout.ops->dest)(dataset, H5AC_dxpl_id) < 0)
+            HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, FAIL, "unable to destroy layout info")
+
+        /* Release layout, fill-value, efl & pipeline messages */
+        if(dataset->shared->dcpl_id != H5P_DATASET_CREATE_DEFAULT)
+            free_failed |= (H5O_msg_reset(H5O_PLINE_ID, &dataset->shared->dcpl_cache.pline) < 0) ||
+                    (H5O_msg_reset(H5O_LAYOUT_ID, &dataset->shared->layout) < 0) ||
+                    (H5O_msg_reset(H5O_FILL_ID, &dataset->shared->dcpl_cache.fill) < 0) ||
+                    (H5O_msg_reset(H5O_EFL_ID, &dataset->shared->dcpl_cache.efl) < 0);
+
         /*
-        * Release datatype, dataspace and creation property list -- there isn't
-        * much we can do if one of these fails, so we just continue.
-        */
-        free_failed = (H5I_dec_ref(dataset->shared->type_id) < 0) ||
+         * Release datatype, dataspace and creation property list -- there isn't
+         * much we can do if one of these fails, so we just continue.
+         */
+        free_failed |= (H5I_dec_ref(dataset->shared->type_id) < 0) ||
                           (H5S_close(dataset->shared->space) < 0) ||
                           (H5I_dec_ref(dataset->shared->dcpl_id) < 0);
 
@@ -2102,7 +2161,7 @@ herr_t
 H5D__iterate(void *buf, hid_t type_id, const H5S_t *space, H5D_operator_t op,
         void *operator_data)
 {
-    herr_t ret_value;
+    herr_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_PACKAGE_NOERR
 
@@ -2139,7 +2198,7 @@ H5D_vlen_reclaim(hid_t type_id, H5S_t *space, hid_t plist_id, void *buf)
 {
     H5T_vlen_alloc_info_t _vl_alloc_info;       /* VL allocation info buffer */
     H5T_vlen_alloc_info_t *vl_alloc_info = &_vl_alloc_info;   /* VL allocation info */
-    herr_t ret_value;
+    herr_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -2180,7 +2239,7 @@ void *
 H5D__vlen_get_buf_size_alloc(size_t size, void *info)
 {
     H5D_vlen_bufsize_t *vlen_bufsize = (H5D_vlen_bufsize_t *)info;
-    void *ret_value;    /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_PACKAGE_NOERR
 
@@ -2721,29 +2780,77 @@ H5D_get_create_plist(H5D_t *dset)
 {
     H5P_genplist_t      *dcpl_plist;            /* Dataset's DCPL */
     H5P_genplist_t      *new_plist;             /* Copy of dataset's DCPL */
+    H5O_layout_t        copied_layout;          /* Layout to tweak */
     H5O_fill_t          copied_fill;            /* Fill value to tweak */
+    H5O_efl_t           copied_efl;             /* External file list to tweak */
     hid_t		new_dcpl_id = FAIL;
-    hid_t		ret_value;              /* Return value */
+    hid_t		ret_value = H5I_INVALID_HID;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Check args */
     if(NULL == (dcpl_plist = (H5P_genplist_t *)H5I_object(dset->shared->dcpl_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "can't get property list")
+        HGOTO_ERROR(H5E_DATASET, H5E_BADTYPE, FAIL, "can't get property list")
 
     /* Copy the creation property list */
     if((new_dcpl_id = H5P_copy_plist(dcpl_plist, TRUE)) < 0)
         HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "unable to copy the creation property list")
     if(NULL == (new_plist = (H5P_genplist_t *)H5I_object(new_dcpl_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "can't get property list")
+        HGOTO_ERROR(H5E_DATASET, H5E_BADTYPE, FAIL, "can't get property list")
 
     /* Retrieve any object creation properties */
     if(H5O_get_create_plist(&dset->oloc, H5AC_ind_dxpl_id, new_plist) < 0)
         HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't get object creation info")
 
+    /* Get the layout property */
+    if(H5P_peek(new_plist, H5D_CRT_LAYOUT_NAME, &copied_layout) < 0)
+        HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't get layout")
+
+    /* Reset layout values set when dataset is created */
+    copied_layout.ops = NULL;
+    switch(copied_layout.type) {
+        case H5D_COMPACT:
+            copied_layout.storage.u.compact.buf = H5MM_xfree(copied_layout.storage.u.compact.buf);
+            HDmemset(&copied_layout.storage.u.compact, 0, sizeof(copied_layout.storage.u.compact));
+            break;
+
+        case H5D_CONTIGUOUS:
+            copied_layout.storage.u.contig.addr = HADDR_UNDEF;
+            copied_layout.storage.u.contig.size = 0;
+            break;
+
+        case H5D_CHUNKED:
+            /* Reset chunk size */
+            copied_layout.u.chunk.size = 0;
+
+            /* Reset index info, if the chunk ops are set */
+            if(copied_layout.storage.u.chunk.ops)
+		/* Reset address and pointer of the array struct for the chunked storage index */
+                if(H5D_chunk_idx_reset(&copied_layout.storage.u.chunk, TRUE) < 0)
+                    HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to reset chunked storage index in dest")
+
+            /* Reset chunk index ops */
+            copied_layout.storage.u.chunk.ops = NULL;
+            break;
+
+        case H5D_VIRTUAL:
+            copied_layout.storage.u.virt.serial_list_hobjid.addr = HADDR_UNDEF;
+            copied_layout.storage.u.virt.serial_list_hobjid.idx = 0;
+            break;
+
+        case H5D_LAYOUT_ERROR:
+        case H5D_NLAYOUTS:
+        default:
+            HDassert(0 && "Unknown layout type!");
+    } /* end switch */
+
+    /* Set back the (possibly modified) layout property to property list */
+    if(H5P_poke(new_plist, H5D_CRT_LAYOUT_NAME, &copied_layout) < 0)
+        HGOTO_ERROR(H5E_DATASET, H5E_CANTSET, FAIL, "unable to set layout")
+
     /* Get the fill value property */
-    if(H5P_get(new_plist, H5D_CRT_FILL_VALUE_NAME, &copied_fill) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
+    if(H5P_peek(new_plist, H5D_CRT_FILL_VALUE_NAME, &copied_fill) < 0)
+        HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't get fill value")
 
     /* Check if there is a fill value, but no type yet */
     if(copied_fill.buf != NULL && copied_fill.type == NULL) {
@@ -2770,7 +2877,7 @@ H5D_get_create_plist(H5D_t *dset)
             src_id = H5I_register(H5I_DATATYPE, H5T_copy(dset->shared->type, H5T_COPY_ALL), FALSE);
             if(src_id < 0) {
                 H5I_dec_ref(dst_id);
-                HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to copy/register datatype")
+                HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to copy/register datatype")
             } /* end if */
 
             /* Allocate a background buffer */
@@ -2778,7 +2885,7 @@ H5D_get_create_plist(H5D_t *dset)
             if(H5T_path_bkg(tpath) && NULL == (bkg_buf = H5FL_BLK_CALLOC(type_conv, bkg_size))) {
                 H5I_dec_ref(src_id);
                 H5I_dec_ref(dst_id);
-                HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed")
+                HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "memory allocation failed")
             } /* end if */
 
             /* Convert fill value */
@@ -2800,9 +2907,26 @@ H5D_get_create_plist(H5D_t *dset)
         } /* end if */
     } /* end if */
 
-    /* Set back the fill value property to property list */
-    if(H5P_set(new_plist, H5D_CRT_FILL_VALUE_NAME, &copied_fill) < 0)
-        HGOTO_ERROR(H5E_DATASET, H5E_CANTSET, FAIL, "unable to set property list fill value")
+    /* Set back the (possibly modified) fill value property to property list */
+    if(H5P_poke(new_plist, H5D_CRT_FILL_VALUE_NAME, &copied_fill) < 0)
+        HGOTO_ERROR(H5E_DATASET, H5E_CANTSET, FAIL, "unable to set fill value")
+
+    /* Get the fill value property */
+    if(H5P_peek(new_plist, H5D_CRT_EXT_FILE_LIST_NAME, &copied_efl) < 0)
+        HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't get external file list")
+
+    /* Reset efl name_offset and heap_addr, these are the values when the dataset is created */
+    if(copied_efl.slot) {
+        unsigned u;
+
+        copied_efl.heap_addr = HADDR_UNDEF;
+        for(u = 0; u < copied_efl.nused; u++)
+            copied_efl.slot[u].name_offset = 0;
+    } /* end if */
+
+    /* Set back the (possibly modified) external file list property to property list */
+    if(H5P_poke(new_plist, H5D_CRT_EXT_FILE_LIST_NAME, &copied_efl) < 0)
+        HGOTO_ERROR(H5E_DATASET, H5E_CANTSET, FAIL, "unable to set external file list")
 
     /* Set the return value */
     ret_value = new_dcpl_id;
diff --git a/src/H5Dio.c b/src/H5Dio.c
index 3126b92..c0aa83e 100644
--- a/src/H5Dio.c
+++ b/src/H5Dio.c
@@ -17,7 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
diff --git a/src/H5Dlayout.c b/src/H5Dlayout.c
index 15ea92a..ae478b2 100644
--- a/src/H5Dlayout.c
+++ b/src/H5Dlayout.c
@@ -17,7 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -137,7 +137,7 @@ done:
 size_t
 H5D__layout_meta_size(const H5F_t *f, const H5O_layout_t *layout, hbool_t include_compact_data)
 {
-    size_t                  ret_value;
+    size_t      ret_value = 0;          /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -282,7 +282,6 @@ H5D__layout_oh_create(H5F_t *file, hid_t dxpl_id, H5O_t *oh, H5D_t *dset,
             } /* end if */
 
             /* Store EFL file name offset */
-            HDassert(0 == efl->slot[u].name_offset);
             efl->slot[u].name_offset = offset;
         } /* end for */
 
@@ -304,12 +303,11 @@ H5D__layout_oh_create(H5F_t *file, hid_t dxpl_id, H5O_t *oh, H5D_t *dset,
 
 done:
     /* Error cleanup */
-    if(ret_value < 0) {
-        if(dset->shared->layout.type == H5D_CHUNKED && layout_init) {
-            if(H5D__chunk_dest(file, dxpl_id, dset) < 0)
-                HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, FAIL, "unable to destroy chunk cache")
-        } /* end if */
-    } /* end if */
+    if(ret_value < 0)
+        if(layout_init)
+            /* Destroy any cached layout information for the dataset */
+            if(dset->shared->layout.ops->dest && (dset->shared->layout.ops->dest)(dset, dxpl_id) < 0)
+                HDONE_ERROR(H5E_DATASET, H5E_CANTRELEASE, FAIL, "unable to destroy layout info")
 
     FUNC_LEAVE_NOAPI_TAG(ret_value, FAIL)
 } /* end H5D__layout_oh_create() */
@@ -381,6 +379,10 @@ H5D__layout_oh_read(H5D_t *dataset, hid_t dxpl_id, hid_t dapl_id, H5P_genplist_t
     /* Sanity check that the layout operations are set up */
     HDassert(dataset->shared->layout.ops);
 
+    /* Initialize the layout information for the dataset */
+    if(dataset->shared->layout.ops->init && (dataset->shared->layout.ops->init)(dataset->oloc.file, dxpl_id, dataset, dapl_id) < 0)
+        HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to initialize layout information")
+
     /* Adjust chunk dimensions to omit datatype size (in last dimension) for creation property */
     if(H5D_CHUNKED == dataset->shared->layout.type)
         dataset->shared->layout.u.chunk.ndims--;
@@ -391,9 +393,6 @@ H5D__layout_oh_read(H5D_t *dataset, hid_t dxpl_id, hid_t dapl_id, H5P_genplist_t
     if(H5D_CHUNKED == dataset->shared->layout.type)
         dataset->shared->layout.u.chunk.ndims++;
 
-    /* Initialize the layout information for the dataset */
-    if(dataset->shared->layout.ops->init && (dataset->shared->layout.ops->init)(dataset->oloc.file, dxpl_id, dataset, dapl_id) < 0)
-        HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to initialize layout information")
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5D__layout_oh_read() */
diff --git a/src/H5Dmodule.h b/src/H5Dmodule.h
new file mode 100644
index 0000000..9b0c411
--- /dev/null
+++ b/src/H5Dmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5D package.  Including this header means that the source file
+ *		is part of the H5D package.
+ */
+#ifndef _H5Dmodule_H
+#define _H5Dmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5D_MODULE
+#define H5_MY_PKG       H5D
+#define H5_MY_PKG_ERR   H5E_DATASET
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Dmodule_H */
+
diff --git a/src/H5Dmpio.c b/src/H5Dmpio.c
index 289e12b..a5f34d1 100644
--- a/src/H5Dmpio.c
+++ b/src/H5Dmpio.c
@@ -27,7 +27,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE /* suppress error about including H5Dpkg */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -605,7 +605,8 @@ H5D__chunk_collective_io(H5D_io_info_t *io_info, const H5D_type_info_t *type_inf
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list")
 
     /* Check the optional property list on what to do with collective chunk IO. */
-    chunk_opt_mode = (H5FD_mpio_chunk_opt_t)H5P_peek_unsigned(dx_plist, H5D_XFER_MPIO_CHUNK_OPT_HARD_NAME);
+    if(H5P_get(dx_plist, H5D_XFER_MPIO_CHUNK_OPT_HARD_NAME, &chunk_opt_mode) < 0)
+        HGOTO_ERROR(H5E_IO, H5E_CANTGET, FAIL, "couldn't get chunk optimization option")
     if(H5FD_MPIO_CHUNK_ONE_IO == chunk_opt_mode)
         io_option = H5D_ONE_LINK_CHUNK_IO;      /*no opt*/
     /* direct request to multi-chunk-io */
@@ -621,7 +622,9 @@ H5D__chunk_collective_io(H5D_io_info_t *io_info, const H5D_type_info_t *type_inf
         if((mpi_size = H5F_mpi_get_size(io_info->dset->oloc.file)) < 0)
             HGOTO_ERROR(H5E_IO, H5E_MPI, FAIL, "unable to obtain mpi size")
 
-        one_link_chunk_io_threshold = H5P_peek_unsigned(dx_plist, H5D_XFER_MPIO_CHUNK_OPT_NUM_NAME);
+        /* Get the chunk optimization option */
+        if(H5P_get(dx_plist, H5D_XFER_MPIO_CHUNK_OPT_NUM_NAME, &one_link_chunk_io_threshold) < 0)
+            HGOTO_ERROR(H5E_IO, H5E_CANTGET, FAIL, "couldn't get chunk optimization option")
 
         /* step 1: choose an IO option */
         /* If the average number of chunk per process is greater than a threshold, we will do one link chunked IO. */
@@ -1698,7 +1701,8 @@ H5D__obtain_mpio_mode(H5D_io_info_t* io_info, H5D_chunk_map_t *fm,
 
     /* Setup parameters */
     H5_CHECKED_ASSIGN(total_chunks, int, fm->layout->u.chunk.nchunks, hsize_t);
-    percent_nproc_per_chunk = H5P_peek_unsigned(dx_plist, H5D_XFER_MPIO_CHUNK_OPT_RATIO_NAME);
+    if(H5P_get(dx_plist, H5D_XFER_MPIO_CHUNK_OPT_RATIO_NAME, &percent_nproc_per_chunk) < 0)
+        HGOTO_ERROR(H5E_IO, H5E_CANTGET, FAIL, "couldn't get percent nproc per chunk")
     /* if ratio is 0, perform collective io */
     if(0 == percent_nproc_per_chunk) {
         if(H5D__chunk_addrmap(io_info, chunk_addr) < 0)
diff --git a/src/H5Doh.c b/src/H5Doh.c
index 2e52102..f8a733d 100644
--- a/src/H5Doh.c
+++ b/src/H5Doh.c
@@ -17,8 +17,8 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
 
 
 /***********/
@@ -108,7 +108,7 @@ H5FL_DEFINE(H5D_copy_file_ud_t);
 static void *
 H5O__dset_get_copy_file_udata(void)
 {
-    void *ret_value;       /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -223,10 +223,10 @@ done:
 static hid_t
 H5O__dset_open(const H5G_loc_t *obj_loc, hid_t lapl_id, hid_t dxpl_id, hbool_t app_ref)
 {
-    H5D_t       *dset = NULL;           /* Dataset opened */
-    htri_t  isdapl;                 /* lapl_id is a dapl */
-    hid_t   dapl_id;                /* dapl to use to open this dataset */
-    hid_t	ret_value;              /* Return value */
+    H5D_t  *dset = NULL;                /* Dataset opened */
+    htri_t  isdapl;                     /* lapl_id is a dapl */
+    hid_t   dapl_id;                    /* dapl to use to open this dataset */
+    hid_t   ret_value = H5I_INVALID_HID;        /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -279,7 +279,7 @@ H5O__dset_create(H5F_t *f, void *_crt_info, H5G_loc_t *obj_loc, hid_t dxpl_id)
 {
     H5D_obj_create_t *crt_info = (H5D_obj_create_t *)_crt_info; /* Dataset creation parameters */
     H5D_t *dset = NULL;         /* New dataset created */
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -327,7 +327,7 @@ static H5O_loc_t *
 H5O__dset_get_oloc(hid_t obj_id)
 {
     H5D_t       *dset;                  /* Dataset opened */
-    H5O_loc_t	*ret_value;             /* Return value */
+    H5O_loc_t	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5Dpkg.h b/src/H5Dpkg.h
index 7f591b4..f07b8f0 100644
--- a/src/H5Dpkg.h
+++ b/src/H5Dpkg.h
@@ -21,7 +21,7 @@
  *		the H5D package.  Source files outside the H5D package should
  *		include H5Dprivate.h instead.
  */
-#ifndef H5D_PACKAGE
+#if !(defined H5D_FRIEND || defined H5D_MODULE)
 #error "Do not include this file outside the H5D package!"
 #endif
 
@@ -121,6 +121,7 @@ typedef ssize_t (*H5D_layout_writevv_func_t)(const struct H5D_io_info_t *io_info
     size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_offset_arr[]);
 typedef herr_t (*H5D_layout_flush_func_t)(H5D_t *dataset, hid_t dxpl_id);
 typedef herr_t (*H5D_layout_io_term_func_t)(const struct H5D_chunk_map_t *cm);
+typedef herr_t (*H5D_layout_dest_func_t)(H5D_t *dataset, hid_t dxpl_id);
 
 /* Typedef for grouping layout I/O routines */
 typedef struct H5D_layout_ops_t {
@@ -138,6 +139,7 @@ typedef struct H5D_layout_ops_t {
     H5D_layout_writevv_func_t writevv;  /* Low-level I/O routine for writing data */
     H5D_layout_flush_func_t flush;      /* Low-level I/O routine for flushing raw data */
     H5D_layout_io_term_func_t io_term;  /* I/O shutdown routine */
+    H5D_layout_dest_func_t dest;        /* Destroy layout info */
 } H5D_layout_ops_t;
 
 /* Function pointers for either multiple or single block I/O access */
@@ -530,8 +532,6 @@ H5_DLLVAR const H5D_chunk_ops_t H5D_COPS_BTREE[1];
 /* Package Private Prototypes */
 /******************************/
 
-H5_DLL herr_t H5D__term_pub_interface(void);
-H5_DLL herr_t H5D__term_deprec_interface(void);
 H5_DLL H5D_t *H5D__create(H5F_t *file, hid_t type_id, const H5S_t *space,
     hid_t dcpl_id, hid_t dapl_id, hid_t dxpl_id);
 H5_DLL H5D_t *H5D__create_named(const H5G_loc_t *loc, const char *name,
@@ -641,7 +641,6 @@ H5_DLL herr_t H5D__chunk_copy(H5F_t *f_src, H5O_storage_chunk_t *storage_src,
 H5_DLL herr_t H5D__chunk_bh_info(H5F_t *f, hid_t dxpl_id, H5O_layout_t *layout,
     const H5O_pline_t *pline, hsize_t *btree_size);
 H5_DLL herr_t H5D__chunk_dump_index(H5D_t *dset, hid_t dxpl_id, FILE *stream);
-H5_DLL herr_t H5D__chunk_dest(H5F_t *f, hid_t dxpl_id, H5D_t *dset);
 H5_DLL herr_t H5D__chunk_delete(H5F_t *f, hid_t dxpl_id, H5O_t *oh,
     H5O_storage_t *store);
 H5_DLL herr_t H5D__chunk_direct_write(const H5D_t *dset, hid_t dxpl_id, uint32_t filters, 
diff --git a/src/H5Dprivate.h b/src/H5Dprivate.h
index d3a23eb..3b43aaf 100644
--- a/src/H5Dprivate.h
+++ b/src/H5Dprivate.h
@@ -189,8 +189,7 @@ H5_DLL herr_t H5D_virtual_update_min_dims(H5O_layout_t *layout, size_t idx);
 H5_DLL herr_t H5D_virtual_parse_source_name(const char *source_name,
     H5O_storage_virtual_name_seg_t **parsed_name, size_t *static_strlen,
     size_t *nsubs);
-H5_DLL void H5D_virtual_free_parsed_name(
-    H5O_storage_virtual_name_seg_t *name_seg);
+H5_DLL herr_t H5D_virtual_free_parsed_name(H5O_storage_virtual_name_seg_t *name_seg);
 
 /* Functions that operate on indexed storage */
 H5_DLL herr_t H5D_btree_debug(H5F_t *f, hid_t dxpl_id, haddr_t addr, FILE * stream,
diff --git a/src/H5Dscatgath.c b/src/H5Dscatgath.c
index 4b0846f..9902b7b 100644
--- a/src/H5Dscatgath.c
+++ b/src/H5Dscatgath.c
@@ -17,7 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
diff --git a/src/H5Dselect.c b/src/H5Dselect.c
index 38f8bc4..ce6073c 100644
--- a/src/H5Dselect.c
+++ b/src/H5Dselect.c
@@ -23,7 +23,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
diff --git a/src/H5Dtest.c b/src/H5Dtest.c
index eef3c91..fd8ff71 100644
--- a/src/H5Dtest.c
+++ b/src/H5Dtest.c
@@ -23,7 +23,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 #define H5D_TESTING		/*suppress warning about H5D testing funcs*/
 
 
diff --git a/src/H5Dvirtual.c b/src/H5Dvirtual.c
index a611321..af9963d 100644
--- a/src/H5Dvirtual.c
+++ b/src/H5Dvirtual.c
@@ -41,7 +41,7 @@
 /* Module Setup */
 /****************/
 
-#define H5D_PACKAGE             /* Suppress error about including H5Dpkg */
+#include "H5Dmodule.h"          /* This source code file is part of the H5D module */
 
 
 /***********/
@@ -1156,12 +1156,13 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-void
+herr_t
 H5D_virtual_free_parsed_name(H5O_storage_virtual_name_seg_t *name_seg)
 {
     H5O_storage_virtual_name_seg_t *next_seg;
+    herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(FAIL)
 
     /* Walk name segments, freeing them */
     while(name_seg) {
@@ -1171,7 +1172,8 @@ H5D_virtual_free_parsed_name(H5O_storage_virtual_name_seg_t *name_seg)
         name_seg = next_seg;
     } /* end while */
 
-    FUNC_LEAVE_NOAPI_VOID
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5D_virtual_free_parsed_name() */
 
 
diff --git a/src/H5E.c b/src/H5E.c
index c3c7685..4374f1d 100644
--- a/src/H5E.c
+++ b/src/H5E.c
@@ -45,10 +45,7 @@
 /* Module Setup */
 /****************/
 
-#define H5E_PACKAGE		/*suppress error about including H5Epkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5E_init_interface
+#include "H5Emodule.h"          /* This source code file is part of the H5E module */
 
 
 /***********/
@@ -83,6 +80,7 @@
 /* Local Prototypes */
 /********************/
 /* Static function declarations */
+static herr_t H5E_set_default_auto(H5E_t *stk);
 static H5E_cls_t *H5E_register_class(const char *cls_name, const char *lib_name,
                                 const char *version);
 static herr_t  H5E_unregister_class(H5E_cls_t *cls);
@@ -100,6 +98,9 @@ static ssize_t H5E_get_num(const H5E_t *err_stack);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -173,45 +174,7 @@ done:
 
 
 /*--------------------------------------------------------------------------
- * Function:    H5E_set_default_auto
- *
- * Purpose:     Initialize "automatic" error stack reporting info to library
- *              default
- *
- * Return:      Non-negative on success/Negative on failure
- *
- * Programmer:  Quincey Koziol
- *              Thursday, November 1, 2007
- *
- *--------------------------------------------------------------------------
- */
-static herr_t
-H5E_set_default_auto(H5E_t *stk)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-#ifndef H5_NO_DEPRECATED_SYMBOLS
-#ifdef H5_USE_16_API_DEFAULT
-    stk->auto_op.vers = 1;
-#else /* H5_USE_16_API */
-    stk->auto_op.vers = 2;
-#endif /* H5_USE_16_API_DEFAULT */
-
-    stk->auto_op.func1 = stk->auto_op.func1_default = (H5E_auto1_t)H5Eprint1;
-    stk->auto_op.func2 = stk->auto_op.func2_default = (H5E_auto2_t)H5Eprint2;
-    stk->auto_op.is_default = TRUE;
-#else /* H5_NO_DEPRECATED_SYMBOLS */
-    stk->auto_op.func2 = (H5E_auto2_t)H5Eprint2;
-#endif /* H5_NO_DEPRECATED_SYMBOLS */
-
-    stk->auto_data = NULL;
-
-    FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5E_set_default_auto() */
-
-
-/*--------------------------------------------------------------------------
- * Function:    H5E_init_interface
+ * Function:    H5E__init_package
  *
  * Purpose:     Initialize interface-specific information
  *
@@ -222,15 +185,15 @@ H5E_set_default_auto(H5E_t *stk)
  *
  *--------------------------------------------------------------------------
  */
-static herr_t
-H5E_init_interface(void)
+herr_t
+H5E__init_package(void)
 {
     H5E_cls_t   *cls;           /* Pointer to error class */
     H5E_msg_t   *msg;           /* Pointer to new error message */
     char lib_vers[128];         /* Buffer to constructu library version within */
-    herr_t      ret_value = SUCCEED;   /* Return value */
+    herr_t ret_value = SUCCEED; /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_PACKAGE
 
     /* Initialize the atom group for the error class IDs */
     if(H5I_register_type(H5I_ERRCLS_CLS) < 0)
@@ -262,11 +225,11 @@ H5E_init_interface(void)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5E_init_interface() */
+} /* end H5E__init_package() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5E_term_interface
+ * Function:	H5E_term_package
  *
  * Purpose:	Terminates the H5E interface
  *
@@ -281,13 +244,13 @@ done:
  *-------------------------------------------------------------------------
  */
 int
-H5E_term_interface(void)
+H5E_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5_PKG_INIT_VAR) {
         int64_t ncls, nmsg, nstk;
 
         /* Check if there are any open error stacks, classes or messages */
@@ -323,22 +286,57 @@ H5E_term_interface(void)
             n++; /*H5I*/
 	} /* end if */
         else {
-            /* Close deprecated interface */
-            n += H5E__term_deprec_interface();
-
 	    /* Destroy the error class, message, and stack id groups */
-	    (void)H5I_dec_type_ref(H5I_ERROR_STACK);
-	    (void)H5I_dec_type_ref(H5I_ERROR_CLASS);
-	    (void)H5I_dec_type_ref(H5I_ERROR_MSG);
-            n++; /*H5I*/
+	    n += (H5I_dec_type_ref(H5I_ERROR_STACK) > 0);
+	    n += (H5I_dec_type_ref(H5I_ERROR_CLASS) > 0);
+	    n += (H5I_dec_type_ref(H5I_ERROR_MSG) > 0);
 
 	    /* Mark closed */
-	    H5_interface_initialize_g = 0;
+            if(0 == n)
+                H5_PKG_INIT_VAR = FALSE;
 	} /* end else */
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5E_term_interface() */
+} /* end H5E_term_package() */
+
+
+/*--------------------------------------------------------------------------
+ * Function:    H5E_set_default_auto
+ *
+ * Purpose:     Initialize "automatic" error stack reporting info to library
+ *              default
+ *
+ * Return:      Non-negative on success/Negative on failure
+ *
+ * Programmer:  Quincey Koziol
+ *              Thursday, November 1, 2007
+ *
+ *--------------------------------------------------------------------------
+ */
+static herr_t
+H5E_set_default_auto(H5E_t *stk)
+{
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+#ifndef H5_NO_DEPRECATED_SYMBOLS
+#ifdef H5_USE_16_API_DEFAULT
+    stk->auto_op.vers = 1;
+#else /* H5_USE_16_API */
+    stk->auto_op.vers = 2;
+#endif /* H5_USE_16_API_DEFAULT */
+
+    stk->auto_op.func1 = stk->auto_op.func1_default = (H5E_auto1_t)H5Eprint1;
+    stk->auto_op.func2 = stk->auto_op.func2_default = (H5E_auto2_t)H5Eprint2;
+    stk->auto_op.is_default = TRUE;
+#else /* H5_NO_DEPRECATED_SYMBOLS */
+    stk->auto_op.func2 = (H5E_auto2_t)H5Eprint2;
+#endif /* H5_NO_DEPRECATED_SYMBOLS */
+
+    stk->auto_data = NULL;
+
+    FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5E_set_default_auto() */
 
 
 #ifdef H5_HAVE_THREADSAFE
@@ -360,7 +358,7 @@ H5E_term_interface(void)
 H5E_t *
 H5E_get_stack(void)
 {
-    H5E_t *estack;
+    H5E_t *estack = NULL;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -371,7 +369,7 @@ H5E_get_stack(void)
 #ifdef H5_HAVE_WIN_THREADS
         estack = (H5E_t *)LocalAlloc(LPTR, sizeof(H5E_t)); /* Win32 has to use LocalAlloc to match the LocalFree in DllMain */
 #else
-        estack = (H5E_t *)H5FL_MALLOC(H5E_t);
+        estack = (H5E_t *)HDmalloc(sizeof(H5E_t));
 #endif /* H5_HAVE_WIN_THREADS */
         HDassert(estack);
 
@@ -475,8 +473,8 @@ done:
 static H5E_cls_t *
 H5E_register_class(const char *cls_name, const char *lib_name, const char *version)
 {
-    H5E_cls_t   *cls = NULL; /* Pointer to error class */
-    H5E_cls_t   *ret_value;  /* Return value */
+    H5E_cls_t   *cls = NULL;            /* Pointer to error class */
+    H5E_cls_t   *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -631,7 +629,7 @@ done:
 static ssize_t
 H5E_get_class_name(const H5E_cls_t *cls, char *name, size_t size)
 {
-    ssize_t       len;          /* Length of error class's name */
+    ssize_t       len = 0;          /* Length of error class's name */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -812,8 +810,8 @@ done:
 static H5E_msg_t *
 H5E_create_msg(H5E_cls_t *cls, H5E_type_t msg_type, const char *msg_str)
 {
-    H5E_msg_t   *msg = NULL;    /* Pointer to new error message */
-    H5E_msg_t   *ret_value;     /* Return value */
+    H5E_msg_t   *msg = NULL;            /* Pointer to new error message */
+    H5E_msg_t   *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -967,10 +965,10 @@ done:
 static H5E_t *
 H5E_get_current_stack(void)
 {
-    H5E_t	*current_stack; /* Pointer to the current error stack */
-    H5E_t	*estack_copy=NULL;   /* Pointer to new error stack to return */
-    unsigned    u;              /* Local index variable */
-    H5E_t      *ret_value;   /* Return value */
+    H5E_t	*current_stack;         /* Pointer to the current error stack */
+    H5E_t	*estack_copy = NULL;    /* Pointer to new error stack to return */
+    unsigned    u;                      /* Local index variable */
+    H5E_t      *ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5EA.c b/src/H5EA.c
index d96f9c2..be60301 100644
--- a/src/H5EA.c
+++ b/src/H5EA.c
@@ -33,7 +33,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
@@ -79,6 +79,9 @@ typedef herr_t (*H5EA__unprotect_func_t)(void *thing, hid_t dxpl_id,
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Extensible array client ID to class mapping */
 
 /* Remember to add client ID to H5EA_cls_id_t in H5EAprivate.h when adding a new
diff --git a/src/H5EAcache.c b/src/H5EAcache.c
index 8a05282..e9c93d4 100644
--- a/src/H5EAcache.c
+++ b/src/H5EAcache.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
diff --git a/src/H5EAdbg.c b/src/H5EAdbg.c
index 9c3ce6d..ef45881 100644
--- a/src/H5EAdbg.c
+++ b/src/H5EAdbg.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
diff --git a/src/H5EAdblkpage.c b/src/H5EAdblkpage.c
index 5d188c2..15bad43 100644
--- a/src/H5EAdblkpage.c
+++ b/src/H5EAdblkpage.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
diff --git a/src/H5EAdblock.c b/src/H5EAdblock.c
index 24be87a..cd20bba 100644
--- a/src/H5EAdblock.c
+++ b/src/H5EAdblock.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
diff --git a/src/H5EAhdr.c b/src/H5EAhdr.c
index e30bbac..eff4b54 100644
--- a/src/H5EAhdr.c
+++ b/src/H5EAhdr.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
diff --git a/src/H5EAiblock.c b/src/H5EAiblock.c
index 364b443..3f49d0d 100644
--- a/src/H5EAiblock.c
+++ b/src/H5EAiblock.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
diff --git a/src/H5EAint.c b/src/H5EAint.c
index 12a9cda..9f910d0 100644
--- a/src/H5EAint.c
+++ b/src/H5EAint.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
diff --git a/src/H5EAmodule.h b/src/H5EAmodule.h
new file mode 100644
index 0000000..405b232
--- /dev/null
+++ b/src/H5EAmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5EA package.  Including this header means that the source file
+ *		is part of the H5EA package.
+ */
+#ifndef _H5EAmodule_H
+#define _H5EAmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5EA_MODULE
+#define H5_MY_PKG       H5EA
+#define H5_MY_PKG_ERR   H5E_EARRAY
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5EAmodule_H */
+
diff --git a/src/H5EApkg.h b/src/H5EApkg.h
index d328c05..3af1b2c 100644
--- a/src/H5EApkg.h
+++ b/src/H5EApkg.h
@@ -21,7 +21,7 @@
  *		the H5EA package.  Source files outside the H5EA package should
  *		include H5EAprivate.h instead.
  */
-#if !(defined(H5EA_PACKAGE) | defined(H5EA_MODULE))
+#if !(defined(H5EA_FRIEND) | defined(H5EA_MODULE))
 #error "Do not include this file outside the H5EA package!"
 #endif
 
@@ -39,16 +39,6 @@
 /* Package Private Macros */
 /**************************/
 
-/* If this package header is being included in one of the H5EA modules, define
- *      the proper control macros for the generic FUNC_ENTER/LEAVE and error
- *      reporting macros.
- */
-#ifdef H5EA_MODULE
-#define H5_MY_PKG       H5EA
-#define H5_MY_PKG_ERR   H5E_EARRAY
-#define H5_MY_PKG_INIT  NO
-#endif /* H5EA_MODULE */
-
 /* Fill value for extensible array test class */
 #ifdef H5EA_TESTING
 #define H5EA_TEST_FILL          ((uint64_t)ULLONG_MAX)
diff --git a/src/H5EAsblock.c b/src/H5EAsblock.c
index 33f34c9..7753f0e 100644
--- a/src/H5EAsblock.c
+++ b/src/H5EAsblock.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
diff --git a/src/H5EAstat.c b/src/H5EAstat.c
index 8a26e34..0c27681 100644
--- a/src/H5EAstat.c
+++ b/src/H5EAstat.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 
 
 /***********************/
diff --git a/src/H5EAtest.c b/src/H5EAtest.c
index b3942ca..905aa7f 100644
--- a/src/H5EAtest.c
+++ b/src/H5EAtest.c
@@ -24,7 +24,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5EA_MODULE
+#include "H5EAmodule.h"         /* This source code file is part of the H5EA module */
 #define H5EA_TESTING
 
 
diff --git a/src/H5Edefin.h b/src/H5Edefin.h
deleted file mode 100644
index 066c35d..0000000
--- a/src/H5Edefin.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group.                                               *
- * Copyright by the Board of Trustees of the University of Illinois.         *
- * All rights reserved.                                                      *
- *                                                                           *
- * This file is part of HDF5.  The full HDF5 copyright notice, including     *
- * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-/* Generated automatically by bin/make_err -- do not edit */
-/* Add new errors to H5err.txt file */
-
-
-#ifndef _H5Edefin_H
-#define _H5Edefin_H
-
-/* Major error IDs */
-hid_t H5E_FUNC_g           = FAIL;      /* Function entry/exit */
-hid_t H5E_FILE_g           = FAIL;      /* File accessibilty */
-hid_t H5E_SOHM_g           = FAIL;      /* Shared Object Header Messages */
-hid_t H5E_SYM_g            = FAIL;      /* Symbol table */
-hid_t H5E_PLUGIN_g         = FAIL;      /* Plugin for dynamically loaded library */
-hid_t H5E_VFL_g            = FAIL;      /* Virtual File Layer */
-hid_t H5E_INTERNAL_g       = FAIL;      /* Internal error (too specific to document in detail) */
-hid_t H5E_BTREE_g          = FAIL;      /* B-Tree node */
-hid_t H5E_REFERENCE_g      = FAIL;      /* References */
-hid_t H5E_DATASPACE_g      = FAIL;      /* Dataspace */
-hid_t H5E_RESOURCE_g       = FAIL;      /* Resource unavailable */
-hid_t H5E_RS_g             = FAIL;      /* Reference Counted Strings */
-hid_t H5E_FARRAY_g         = FAIL;      /* Fixed Array */
-hid_t H5E_HEAP_g           = FAIL;      /* Heap */
-hid_t H5E_ATTR_g           = FAIL;      /* Attribute */
-hid_t H5E_IO_g             = FAIL;      /* Low-level I/O */
-hid_t H5E_EFL_g            = FAIL;      /* External file list */
-hid_t H5E_TST_g            = FAIL;      /* Ternary Search Trees */
-hid_t H5E_FSPACE_g         = FAIL;      /* Free Space Manager */
-hid_t H5E_DATASET_g        = FAIL;      /* Dataset */
-hid_t H5E_STORAGE_g        = FAIL;      /* Data storage */
-hid_t H5E_LINK_g           = FAIL;      /* Links */
-hid_t H5E_PLIST_g          = FAIL;      /* Property lists */
-hid_t H5E_DATATYPE_g       = FAIL;      /* Datatype */
-hid_t H5E_OHDR_g           = FAIL;      /* Object header */
-hid_t H5E_ATOM_g           = FAIL;      /* Object atom */
-hid_t H5E_NONE_MAJOR_g     = FAIL;      /* No error */
-hid_t H5E_SLIST_g          = FAIL;      /* Skip Lists */
-hid_t H5E_ARGS_g           = FAIL;      /* Invalid arguments to routine */
-hid_t H5E_EARRAY_g         = FAIL;      /* Extensible Array */
-hid_t H5E_PLINE_g          = FAIL;      /* Data filters */
-hid_t H5E_ERROR_g          = FAIL;      /* Error API */
-hid_t H5E_CACHE_g          = FAIL;      /* Object cache */
-
-/* Minor error IDs */
-
-/* Generic low-level file I/O errors */
-hid_t H5E_SEEKERROR_g      = FAIL;      /* Seek failed */
-hid_t H5E_READERROR_g      = FAIL;      /* Read failed */
-hid_t H5E_WRITEERROR_g     = FAIL;      /* Write failed */
-hid_t H5E_CLOSEERROR_g     = FAIL;      /* Close failed */
-hid_t H5E_OVERFLOW_g       = FAIL;      /* Address overflowed */
-hid_t H5E_FCNTL_g          = FAIL;      /* File control (fcntl) failed */
-
-/* Resource errors */
-hid_t H5E_NOSPACE_g        = FAIL;      /* No space available for allocation */
-hid_t H5E_CANTALLOC_g      = FAIL;      /* Can't allocate space */
-hid_t H5E_CANTCOPY_g       = FAIL;      /* Unable to copy object */
-hid_t H5E_CANTFREE_g       = FAIL;      /* Unable to free object */
-hid_t H5E_ALREADYEXISTS_g  = FAIL;      /* Object already exists */
-hid_t H5E_CANTLOCK_g       = FAIL;      /* Unable to lock object */
-hid_t H5E_CANTUNLOCK_g     = FAIL;      /* Unable to unlock object */
-hid_t H5E_CANTGC_g         = FAIL;      /* Unable to garbage collect */
-hid_t H5E_CANTGETSIZE_g    = FAIL;      /* Unable to compute size */
-hid_t H5E_OBJOPEN_g        = FAIL;      /* Object is already open */
-
-/* Heap errors */
-hid_t H5E_CANTRESTORE_g    = FAIL;      /* Can't restore condition */
-hid_t H5E_CANTCOMPUTE_g    = FAIL;      /* Can't compute value */
-hid_t H5E_CANTEXTEND_g     = FAIL;      /* Can't extend heap's space */
-hid_t H5E_CANTATTACH_g     = FAIL;      /* Can't attach object */
-hid_t H5E_CANTUPDATE_g     = FAIL;      /* Can't update object */
-hid_t H5E_CANTOPERATE_g    = FAIL;      /* Can't operate on object */
-
-/* Function entry/exit interface errors */
-hid_t H5E_CANTINIT_g       = FAIL;      /* Unable to initialize object */
-hid_t H5E_ALREADYINIT_g    = FAIL;      /* Object already initialized */
-hid_t H5E_CANTRELEASE_g    = FAIL;      /* Unable to release object */
-
-/* Property list errors */
-hid_t H5E_CANTGET_g        = FAIL;      /* Can't get value */
-hid_t H5E_CANTSET_g        = FAIL;      /* Can't set value */
-hid_t H5E_DUPCLASS_g       = FAIL;      /* Duplicate class name in parent class */
-hid_t H5E_SETDISALLOWED_g  = FAIL;      /* Disallowed operation */
-
-/* Free space errors */
-hid_t H5E_CANTMERGE_g      = FAIL;      /* Can't merge objects */
-hid_t H5E_CANTREVIVE_g     = FAIL;      /* Can't revive object */
-hid_t H5E_CANTSHRINK_g     = FAIL;      /* Can't shrink container */
-
-/* Object header related errors */
-hid_t H5E_LINKCOUNT_g      = FAIL;      /* Bad object header link count */
-hid_t H5E_VERSION_g        = FAIL;      /* Wrong version number */
-hid_t H5E_ALIGNMENT_g      = FAIL;      /* Alignment error */
-hid_t H5E_BADMESG_g        = FAIL;      /* Unrecognized message */
-hid_t H5E_CANTDELETE_g     = FAIL;      /* Can't delete message */
-hid_t H5E_BADITER_g        = FAIL;      /* Iteration failed */
-hid_t H5E_CANTPACK_g       = FAIL;      /* Can't pack messages */
-hid_t H5E_CANTRESET_g      = FAIL;      /* Can't reset object */
-hid_t H5E_CANTRENAME_g     = FAIL;      /* Unable to rename object */
-
-/* System level errors */
-hid_t H5E_SYSERRSTR_g      = FAIL;      /* System error message */
-
-/* I/O pipeline errors */
-hid_t H5E_NOFILTER_g       = FAIL;      /* Requested filter is not available */
-hid_t H5E_CALLBACK_g       = FAIL;      /* Callback failed */
-hid_t H5E_CANAPPLY_g       = FAIL;      /* Error from filter 'can apply' callback */
-hid_t H5E_SETLOCAL_g       = FAIL;      /* Error from filter 'set local' callback */
-hid_t H5E_NOENCODER_g      = FAIL;      /* Filter present but encoding disabled */
-hid_t H5E_CANTFILTER_g     = FAIL;      /* Filter operation failed */
-
-/* Group related errors */
-hid_t H5E_CANTOPENOBJ_g    = FAIL;      /* Can't open object */
-hid_t H5E_CANTCLOSEOBJ_g   = FAIL;      /* Can't close object */
-hid_t H5E_COMPLEN_g        = FAIL;      /* Name component is too long */
-hid_t H5E_PATH_g           = FAIL;      /* Problem with path to object */
-
-/* No error */
-hid_t H5E_NONE_MINOR_g     = FAIL;      /* No error */
-
-/* Plugin errors */
-hid_t H5E_OPENERROR_g      = FAIL;      /* Can't open directory or file */
-
-/* File accessibilty errors */
-hid_t H5E_FILEEXISTS_g     = FAIL;      /* File already exists */
-hid_t H5E_FILEOPEN_g       = FAIL;      /* File already open */
-hid_t H5E_CANTCREATE_g     = FAIL;      /* Unable to create file */
-hid_t H5E_CANTOPENFILE_g   = FAIL;      /* Unable to open file */
-hid_t H5E_CANTCLOSEFILE_g  = FAIL;      /* Unable to close file */
-hid_t H5E_NOTHDF5_g        = FAIL;      /* Not an HDF5 file */
-hid_t H5E_BADFILE_g        = FAIL;      /* Bad file ID accessed */
-hid_t H5E_TRUNCATED_g      = FAIL;      /* File has been truncated */
-hid_t H5E_MOUNT_g          = FAIL;      /* File mount error */
-
-/* Object atom related errors */
-hid_t H5E_BADATOM_g        = FAIL;      /* Unable to find atom information (already closed?) */
-hid_t H5E_BADGROUP_g       = FAIL;      /* Unable to find ID group information */
-hid_t H5E_CANTREGISTER_g   = FAIL;      /* Unable to register new atom */
-hid_t H5E_CANTINC_g        = FAIL;      /* Unable to increment reference count */
-hid_t H5E_CANTDEC_g        = FAIL;      /* Unable to decrement reference count */
-hid_t H5E_NOIDS_g          = FAIL;      /* Out of IDs for group */
-
-/* Cache related errors */
-hid_t H5E_CANTFLUSH_g      = FAIL;      /* Unable to flush data from cache */
-hid_t H5E_CANTSERIALIZE_g  = FAIL;      /* Unable to serialize data from cache */
-hid_t H5E_CANTTAG_g        = FAIL;      /* Unable to tag metadata in the cache */
-hid_t H5E_CANTLOAD_g       = FAIL;      /* Unable to load metadata into cache */
-hid_t H5E_PROTECT_g        = FAIL;      /* Protected metadata error */
-hid_t H5E_NOTCACHED_g      = FAIL;      /* Metadata not currently cached */
-hid_t H5E_SYSTEM_g         = FAIL;      /* Internal error detected */
-hid_t H5E_CANTINS_g        = FAIL;      /* Unable to insert metadata into cache */
-hid_t H5E_CANTPROTECT_g    = FAIL;      /* Unable to protect metadata */
-hid_t H5E_CANTUNPROTECT_g  = FAIL;      /* Unable to unprotect metadata */
-hid_t H5E_CANTPIN_g        = FAIL;      /* Unable to pin cache entry */
-hid_t H5E_CANTUNPIN_g      = FAIL;      /* Unable to un-pin cache entry */
-hid_t H5E_CANTMARKDIRTY_g  = FAIL;      /* Unable to mark a pinned entry as dirty */
-hid_t H5E_CANTDIRTY_g      = FAIL;      /* Unable to mark metadata as dirty */
-hid_t H5E_CANTEXPUNGE_g    = FAIL;      /* Unable to expunge a metadata cache entry */
-hid_t H5E_CANTRESIZE_g     = FAIL;      /* Unable to resize a metadata cache entry */
-hid_t H5E_CANTDEPEND_g     = FAIL;      /* Unable to create a flush dependency */
-hid_t H5E_CANTUNDEPEND_g   = FAIL;      /* Unable to destroy a flush dependency */
-hid_t H5E_CANTNOTIFY_g     = FAIL;      /* Unable to notify object about action */
-
-/* Link related errors */
-hid_t H5E_TRAVERSE_g       = FAIL;      /* Link traversal failure */
-hid_t H5E_NLINKS_g         = FAIL;      /* Too many soft links in path */
-hid_t H5E_NOTREGISTERED_g  = FAIL;      /* Link class not registered */
-hid_t H5E_CANTMOVE_g       = FAIL;      /* Can't move object */
-hid_t H5E_CANTSORT_g       = FAIL;      /* Can't sort objects */
-
-/* Parallel MPI errors */
-hid_t H5E_MPI_g            = FAIL;      /* Some MPI function failed */
-hid_t H5E_MPIERRSTR_g      = FAIL;      /* MPI Error String */
-hid_t H5E_CANTRECV_g       = FAIL;      /* Can't receive data */
-
-/* Dataspace errors */
-hid_t H5E_CANTCLIP_g       = FAIL;      /* Can't clip hyperslab region */
-hid_t H5E_CANTCOUNT_g      = FAIL;      /* Can't count elements */
-hid_t H5E_CANTSELECT_g     = FAIL;      /* Can't select hyperslab */
-hid_t H5E_CANTNEXT_g       = FAIL;      /* Can't move to next iterator location */
-hid_t H5E_BADSELECT_g      = FAIL;      /* Invalid selection */
-hid_t H5E_CANTCOMPARE_g    = FAIL;      /* Can't compare objects */
-hid_t H5E_CANTAPPEND_g     = FAIL;      /* Can't append object */
-
-/* Argument errors */
-hid_t H5E_UNINITIALIZED_g  = FAIL;      /* Information is uinitialized */
-hid_t H5E_UNSUPPORTED_g    = FAIL;      /* Feature is unsupported */
-hid_t H5E_BADTYPE_g        = FAIL;      /* Inappropriate type */
-hid_t H5E_BADRANGE_g       = FAIL;      /* Out of range */
-hid_t H5E_BADVALUE_g       = FAIL;      /* Bad value */
-
-/* B-tree related errors */
-hid_t H5E_NOTFOUND_g       = FAIL;      /* Object not found */
-hid_t H5E_EXISTS_g         = FAIL;      /* Object already exists */
-hid_t H5E_CANTENCODE_g     = FAIL;      /* Unable to encode value */
-hid_t H5E_CANTDECODE_g     = FAIL;      /* Unable to decode value */
-hid_t H5E_CANTSPLIT_g      = FAIL;      /* Unable to split node */
-hid_t H5E_CANTREDISTRIBUTE_g = FAIL;      /* Unable to redistribute records */
-hid_t H5E_CANTSWAP_g       = FAIL;      /* Unable to swap records */
-hid_t H5E_CANTINSERT_g     = FAIL;      /* Unable to insert object */
-hid_t H5E_CANTLIST_g       = FAIL;      /* Unable to list node */
-hid_t H5E_CANTMODIFY_g     = FAIL;      /* Unable to modify record */
-hid_t H5E_CANTREMOVE_g     = FAIL;      /* Unable to remove object */
-
-/* Datatype conversion errors */
-hid_t H5E_CANTCONVERT_g    = FAIL;      /* Can't convert datatypes */
-hid_t H5E_BADSIZE_g        = FAIL;      /* Bad size for object */
-
-#endif /* H5Edefin_H */
diff --git a/src/H5Edeprec.c b/src/H5Edeprec.c
index 6a83745..1a13c01 100644
--- a/src/H5Edeprec.c
+++ b/src/H5Edeprec.c
@@ -31,10 +31,7 @@
 /* Module Setup */
 /****************/
 
-#define H5E_PACKAGE		/*suppress error about including H5Epkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5E__init_deprec_interface
+#include "H5Emodule.h"          /* This source code file is part of the H5E module */
 
 
 /***********/
@@ -82,51 +79,6 @@
 /*******************/
 
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5E__init_deprec_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5E__init_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5E_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5E__init_deprec_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5E_init())
-} /* H5E__init_deprec_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5E__term_deprec_interface -- Terminate interface
-USAGE
-    herr_t H5E__term_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5E__term_deprec_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5E__term_deprec_interface() */
-
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Einit.h b/src/H5Einit.h
deleted file mode 100644
index 35049b2..0000000
--- a/src/H5Einit.h
+++ /dev/null
@@ -1,845 +0,0 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group.                                               *
- * Copyright by the Board of Trustees of the University of Illinois.         *
- * All rights reserved.                                                      *
- *                                                                           *
- * This file is part of HDF5.  The full HDF5 copyright notice, including     *
- * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-/* Generated automatically by bin/make_err -- do not edit */
-/* Add new errors to H5err.txt file */
-
-
-#ifndef _H5Einit_H
-#define _H5Einit_H
-
-/*********************/
-/* Major error codes */
-/*********************/
-
-assert(H5E_FUNC_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Function entry/exit"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_FUNC_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_FILE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "File accessibilty"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_FILE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_SOHM_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Shared Object Header Messages"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_SOHM_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_SYM_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Symbol table"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_SYM_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_PLUGIN_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Plugin for dynamically loaded library"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_PLUGIN_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_VFL_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Virtual File Layer"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_VFL_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_INTERNAL_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Internal error (too specific to document in detail)"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_INTERNAL_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BTREE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "B-Tree node"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BTREE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_REFERENCE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "References"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_REFERENCE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_DATASPACE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Dataspace"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_DATASPACE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_RESOURCE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Resource unavailable"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_RESOURCE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_RS_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Reference Counted Strings"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_RS_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_FARRAY_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Fixed Array"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_FARRAY_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_HEAP_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Heap"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_HEAP_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_ATTR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Attribute"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_ATTR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_IO_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Low-level I/O"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_IO_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_EFL_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "External file list"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_EFL_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_TST_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Ternary Search Trees"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_TST_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_FSPACE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Free Space Manager"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_FSPACE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_DATASET_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Dataset"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_DATASET_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_STORAGE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Data storage"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_STORAGE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_LINK_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Links"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_LINK_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_PLIST_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Property lists"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_PLIST_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_DATATYPE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Datatype"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_DATATYPE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_OHDR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Object header"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_OHDR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_ATOM_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Object atom"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_ATOM_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_NONE_MAJOR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "No error"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NONE_MAJOR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_SLIST_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Skip Lists"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_SLIST_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_ARGS_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Invalid arguments to routine"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_ARGS_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_EARRAY_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Extensible Array"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_EARRAY_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_PLINE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Data filters"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_PLINE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_ERROR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Error API"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_ERROR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CACHE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MAJOR, "Object cache"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CACHE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/*********************/
-/* Minor error codes */
-/*********************/
-
-
-/* Generic low-level file I/O errors */
-assert(H5E_SEEKERROR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Seek failed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_SEEKERROR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_READERROR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Read failed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_READERROR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_WRITEERROR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Write failed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_WRITEERROR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CLOSEERROR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Close failed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CLOSEERROR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_OVERFLOW_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Address overflowed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_OVERFLOW_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_FCNTL_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "File control (fcntl) failed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_FCNTL_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Resource errors */
-assert(H5E_NOSPACE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "No space available for allocation"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NOSPACE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTALLOC_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't allocate space"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTALLOC_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTCOPY_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to copy object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTCOPY_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTFREE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to free object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTFREE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_ALREADYEXISTS_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Object already exists"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_ALREADYEXISTS_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTLOCK_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to lock object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTLOCK_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTUNLOCK_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to unlock object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTUNLOCK_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTGC_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to garbage collect"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTGC_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTGETSIZE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to compute size"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTGETSIZE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_OBJOPEN_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Object is already open"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_OBJOPEN_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Heap errors */
-assert(H5E_CANTRESTORE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't restore condition"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTRESTORE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTCOMPUTE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't compute value"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTCOMPUTE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTEXTEND_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't extend heap's space"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTEXTEND_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTATTACH_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't attach object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTATTACH_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTUPDATE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't update object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTUPDATE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTOPERATE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't operate on object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTOPERATE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Function entry/exit interface errors */
-assert(H5E_CANTINIT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to initialize object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTINIT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_ALREADYINIT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Object already initialized"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_ALREADYINIT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTRELEASE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to release object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTRELEASE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Property list errors */
-assert(H5E_CANTGET_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't get value"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTGET_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTSET_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't set value"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTSET_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_DUPCLASS_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Duplicate class name in parent class"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_DUPCLASS_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_SETDISALLOWED_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Disallowed operation"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_SETDISALLOWED_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Free space errors */
-assert(H5E_CANTMERGE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't merge objects"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTMERGE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTREVIVE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't revive object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTREVIVE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTSHRINK_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't shrink container"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTSHRINK_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Object header related errors */
-assert(H5E_LINKCOUNT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Bad object header link count"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_LINKCOUNT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_VERSION_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Wrong version number"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_VERSION_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_ALIGNMENT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Alignment error"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_ALIGNMENT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BADMESG_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unrecognized message"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADMESG_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTDELETE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't delete message"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTDELETE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BADITER_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Iteration failed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADITER_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTPACK_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't pack messages"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTPACK_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTRESET_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't reset object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTRESET_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTRENAME_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to rename object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTRENAME_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* System level errors */
-assert(H5E_SYSERRSTR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "System error message"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_SYSERRSTR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* I/O pipeline errors */
-assert(H5E_NOFILTER_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Requested filter is not available"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NOFILTER_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CALLBACK_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Callback failed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CALLBACK_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANAPPLY_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Error from filter 'can apply' callback"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANAPPLY_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_SETLOCAL_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Error from filter 'set local' callback"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_SETLOCAL_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_NOENCODER_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Filter present but encoding disabled"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NOENCODER_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTFILTER_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Filter operation failed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTFILTER_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Group related errors */
-assert(H5E_CANTOPENOBJ_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't open object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTOPENOBJ_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTCLOSEOBJ_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't close object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTCLOSEOBJ_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_COMPLEN_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Name component is too long"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_COMPLEN_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_PATH_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Problem with path to object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_PATH_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* No error */
-assert(H5E_NONE_MINOR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "No error"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NONE_MINOR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Plugin errors */
-assert(H5E_OPENERROR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't open directory or file"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_OPENERROR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* File accessibilty errors */
-assert(H5E_FILEEXISTS_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "File already exists"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_FILEEXISTS_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_FILEOPEN_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "File already open"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_FILEOPEN_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTCREATE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to create file"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTCREATE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTOPENFILE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to open file"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTOPENFILE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTCLOSEFILE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to close file"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTCLOSEFILE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_NOTHDF5_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Not an HDF5 file"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NOTHDF5_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BADFILE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Bad file ID accessed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADFILE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_TRUNCATED_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "File has been truncated"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_TRUNCATED_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_MOUNT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "File mount error"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_MOUNT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Object atom related errors */
-assert(H5E_BADATOM_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to find atom information (already closed?)"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADATOM_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BADGROUP_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to find ID group information"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADGROUP_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTREGISTER_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to register new atom"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTREGISTER_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTINC_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to increment reference count"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTINC_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTDEC_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to decrement reference count"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTDEC_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_NOIDS_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Out of IDs for group"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NOIDS_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Cache related errors */
-assert(H5E_CANTFLUSH_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to flush data from cache"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTFLUSH_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTSERIALIZE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to serialize data from cache"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTSERIALIZE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTTAG_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to tag metadata in the cache"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTTAG_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTLOAD_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to load metadata into cache"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTLOAD_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_PROTECT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Protected metadata error"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_PROTECT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_NOTCACHED_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Metadata not currently cached"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NOTCACHED_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_SYSTEM_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Internal error detected"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_SYSTEM_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTINS_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to insert metadata into cache"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTINS_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTPROTECT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to protect metadata"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTPROTECT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTUNPROTECT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to unprotect metadata"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTUNPROTECT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTPIN_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to pin cache entry"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTPIN_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTUNPIN_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to un-pin cache entry"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTUNPIN_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTMARKDIRTY_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to mark a pinned entry as dirty"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTMARKDIRTY_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTDIRTY_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to mark metadata as dirty"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTDIRTY_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTEXPUNGE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to expunge a metadata cache entry"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTEXPUNGE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTRESIZE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to resize a metadata cache entry"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTRESIZE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTDEPEND_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to create a flush dependency"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTDEPEND_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTUNDEPEND_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to destroy a flush dependency"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTUNDEPEND_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTNOTIFY_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to notify object about action"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTNOTIFY_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Link related errors */
-assert(H5E_TRAVERSE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Link traversal failure"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_TRAVERSE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_NLINKS_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Too many soft links in path"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NLINKS_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_NOTREGISTERED_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Link class not registered"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NOTREGISTERED_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTMOVE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't move object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTMOVE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTSORT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't sort objects"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTSORT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Parallel MPI errors */
-assert(H5E_MPI_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Some MPI function failed"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_MPI_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_MPIERRSTR_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "MPI Error String"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_MPIERRSTR_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTRECV_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't receive data"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTRECV_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Dataspace errors */
-assert(H5E_CANTCLIP_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't clip hyperslab region"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTCLIP_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTCOUNT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't count elements"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTCOUNT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTSELECT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't select hyperslab"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTSELECT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTNEXT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't move to next iterator location"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTNEXT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BADSELECT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Invalid selection"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADSELECT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTCOMPARE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't compare objects"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTCOMPARE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTAPPEND_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't append object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTAPPEND_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Argument errors */
-assert(H5E_UNINITIALIZED_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Information is uinitialized"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_UNINITIALIZED_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_UNSUPPORTED_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Feature is unsupported"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_UNSUPPORTED_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BADTYPE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Inappropriate type"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADTYPE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BADRANGE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Out of range"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADRANGE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BADVALUE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Bad value"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADVALUE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* B-tree related errors */
-assert(H5E_NOTFOUND_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Object not found"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_NOTFOUND_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_EXISTS_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Object already exists"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_EXISTS_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTENCODE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to encode value"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTENCODE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTDECODE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to decode value"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTDECODE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTSPLIT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to split node"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTSPLIT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTREDISTRIBUTE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to redistribute records"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTREDISTRIBUTE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTSWAP_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to swap records"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTSWAP_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTINSERT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to insert object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTINSERT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTLIST_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to list node"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTLIST_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTMODIFY_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to modify record"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTMODIFY_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_CANTREMOVE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Unable to remove object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTREMOVE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-/* Datatype conversion errors */
-assert(H5E_CANTCONVERT_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Can't convert datatypes"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_CANTCONVERT_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-assert(H5E_BADSIZE_g==(-1));
-if((msg = H5E_create_msg(cls, H5E_MINOR, "Bad size for object"))==NULL)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTINIT, FAIL, "error message initialization failed")
-if((H5E_BADSIZE_g = H5I_register(H5I_ERROR_MSG, msg, FALSE))<0)
-    HGOTO_ERROR(H5E_ERROR, H5E_CANTREGISTER, FAIL, "can't register error message")
-
-#endif /* H5Einit_H */
diff --git a/src/H5Eint.c b/src/H5Eint.c
index 07d1e46..6e84a09 100644
--- a/src/H5Eint.c
+++ b/src/H5Eint.c
@@ -28,10 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5E_PACKAGE		/*suppress error about including H5Epkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5E_init_int_interface
+#include "H5Emodule.h"          /* This source code file is part of the H5E module */
 
 
 /***********/
@@ -117,27 +114,6 @@ int	H5E_mpi_error_str_len;
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5E_init_int_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5E_init_int_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5E_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5E_init_int_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5E_init())
-} /* H5E_init_int_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5E_get_msg
  *
@@ -154,7 +130,7 @@ H5E_init_int_interface(void)
 ssize_t
 H5E_get_msg(const H5E_msg_t *msg, H5E_type_t *type, char *msg_str, size_t size)
 {
-    ssize_t       len;          /* Length of error message */
+    ssize_t       len = -1;     /* Length of error message */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Emodule.h b/src/H5Emodule.h
new file mode 100644
index 0000000..d624409
--- /dev/null
+++ b/src/H5Emodule.h
@@ -0,0 +1,36 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5E package.  Including this header means that the source file
+ *		is part of the H5E package.
+ */
+#ifndef _H5Emodule_H
+#define _H5Emodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5E_MODULE
+#define H5_MY_PKG       H5E
+#define H5_MY_PKG_ERR   H5E_ERROR
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Emodule_H */
+
+
diff --git a/src/H5Epkg.h b/src/H5Epkg.h
index bfaaf9d..3af653a 100644
--- a/src/H5Epkg.h
+++ b/src/H5Epkg.h
@@ -21,7 +21,7 @@
  *		the H5E package.  Source files outside the H5E package should
  *		include H5Eprivate.h instead.
  */
-#ifndef H5E_PACKAGE
+#if !(defined H5E_FRIEND || defined H5E_MODULE)
 #error "Do not include this file outside the H5E package!"
 #endif
 
diff --git a/src/H5Epubgen.h b/src/H5Epubgen.h
deleted file mode 100644
index 8b60079..0000000
--- a/src/H5Epubgen.h
+++ /dev/null
@@ -1,382 +0,0 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group.                                               *
- * Copyright by the Board of Trustees of the University of Illinois.         *
- * All rights reserved.                                                      *
- *                                                                           *
- * This file is part of HDF5.  The full HDF5 copyright notice, including     *
- * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-/* Generated automatically by bin/make_err -- do not edit */
-/* Add new errors to H5err.txt file */
-
-
-#ifndef _H5Epubgen_H
-#define _H5Epubgen_H
-
-/*********************/
-/* Major error codes */
-/*********************/
-
-#define H5E_FUNC             (H5OPEN H5E_FUNC_g)
-#define H5E_FILE             (H5OPEN H5E_FILE_g)
-#define H5E_SOHM             (H5OPEN H5E_SOHM_g)
-#define H5E_SYM              (H5OPEN H5E_SYM_g)
-#define H5E_PLUGIN           (H5OPEN H5E_PLUGIN_g)
-#define H5E_VFL              (H5OPEN H5E_VFL_g)
-#define H5E_INTERNAL         (H5OPEN H5E_INTERNAL_g)
-#define H5E_BTREE            (H5OPEN H5E_BTREE_g)
-#define H5E_REFERENCE        (H5OPEN H5E_REFERENCE_g)
-#define H5E_DATASPACE        (H5OPEN H5E_DATASPACE_g)
-#define H5E_RESOURCE         (H5OPEN H5E_RESOURCE_g)
-#define H5E_RS               (H5OPEN H5E_RS_g)
-#define H5E_FARRAY           (H5OPEN H5E_FARRAY_g)
-#define H5E_HEAP             (H5OPEN H5E_HEAP_g)
-#define H5E_ATTR             (H5OPEN H5E_ATTR_g)
-#define H5E_IO               (H5OPEN H5E_IO_g)
-#define H5E_EFL              (H5OPEN H5E_EFL_g)
-#define H5E_TST              (H5OPEN H5E_TST_g)
-#define H5E_FSPACE           (H5OPEN H5E_FSPACE_g)
-#define H5E_DATASET          (H5OPEN H5E_DATASET_g)
-#define H5E_STORAGE          (H5OPEN H5E_STORAGE_g)
-#define H5E_LINK             (H5OPEN H5E_LINK_g)
-#define H5E_PLIST            (H5OPEN H5E_PLIST_g)
-#define H5E_DATATYPE         (H5OPEN H5E_DATATYPE_g)
-#define H5E_OHDR             (H5OPEN H5E_OHDR_g)
-#define H5E_ATOM             (H5OPEN H5E_ATOM_g)
-#define H5E_NONE_MAJOR       (H5OPEN H5E_NONE_MAJOR_g)
-#define H5E_SLIST            (H5OPEN H5E_SLIST_g)
-#define H5E_ARGS             (H5OPEN H5E_ARGS_g)
-#define H5E_EARRAY           (H5OPEN H5E_EARRAY_g)
-#define H5E_PLINE            (H5OPEN H5E_PLINE_g)
-#define H5E_ERROR            (H5OPEN H5E_ERROR_g)
-#define H5E_CACHE            (H5OPEN H5E_CACHE_g)
-H5_DLLVAR hid_t H5E_FUNC_g;          /* Function entry/exit */
-H5_DLLVAR hid_t H5E_FILE_g;          /* File accessibilty */
-H5_DLLVAR hid_t H5E_SOHM_g;          /* Shared Object Header Messages */
-H5_DLLVAR hid_t H5E_SYM_g;           /* Symbol table */
-H5_DLLVAR hid_t H5E_PLUGIN_g;        /* Plugin for dynamically loaded library */
-H5_DLLVAR hid_t H5E_VFL_g;           /* Virtual File Layer */
-H5_DLLVAR hid_t H5E_INTERNAL_g;      /* Internal error (too specific to document in detail) */
-H5_DLLVAR hid_t H5E_BTREE_g;         /* B-Tree node */
-H5_DLLVAR hid_t H5E_REFERENCE_g;     /* References */
-H5_DLLVAR hid_t H5E_DATASPACE_g;     /* Dataspace */
-H5_DLLVAR hid_t H5E_RESOURCE_g;      /* Resource unavailable */
-H5_DLLVAR hid_t H5E_RS_g;            /* Reference Counted Strings */
-H5_DLLVAR hid_t H5E_FARRAY_g;        /* Fixed Array */
-H5_DLLVAR hid_t H5E_HEAP_g;          /* Heap */
-H5_DLLVAR hid_t H5E_ATTR_g;          /* Attribute */
-H5_DLLVAR hid_t H5E_IO_g;            /* Low-level I/O */
-H5_DLLVAR hid_t H5E_EFL_g;           /* External file list */
-H5_DLLVAR hid_t H5E_TST_g;           /* Ternary Search Trees */
-H5_DLLVAR hid_t H5E_FSPACE_g;        /* Free Space Manager */
-H5_DLLVAR hid_t H5E_DATASET_g;       /* Dataset */
-H5_DLLVAR hid_t H5E_STORAGE_g;       /* Data storage */
-H5_DLLVAR hid_t H5E_LINK_g;          /* Links */
-H5_DLLVAR hid_t H5E_PLIST_g;         /* Property lists */
-H5_DLLVAR hid_t H5E_DATATYPE_g;      /* Datatype */
-H5_DLLVAR hid_t H5E_OHDR_g;          /* Object header */
-H5_DLLVAR hid_t H5E_ATOM_g;          /* Object atom */
-H5_DLLVAR hid_t H5E_NONE_MAJOR_g;    /* No error */
-H5_DLLVAR hid_t H5E_SLIST_g;         /* Skip Lists */
-H5_DLLVAR hid_t H5E_ARGS_g;          /* Invalid arguments to routine */
-H5_DLLVAR hid_t H5E_EARRAY_g;        /* Extensible Array */
-H5_DLLVAR hid_t H5E_PLINE_g;         /* Data filters */
-H5_DLLVAR hid_t H5E_ERROR_g;         /* Error API */
-H5_DLLVAR hid_t H5E_CACHE_g;         /* Object cache */
-
-/*********************/
-/* Minor error codes */
-/*********************/
-
-/* Generic low-level file I/O errors */
-#define H5E_SEEKERROR        (H5OPEN H5E_SEEKERROR_g)
-#define H5E_READERROR        (H5OPEN H5E_READERROR_g)
-#define H5E_WRITEERROR       (H5OPEN H5E_WRITEERROR_g)
-#define H5E_CLOSEERROR       (H5OPEN H5E_CLOSEERROR_g)
-#define H5E_OVERFLOW         (H5OPEN H5E_OVERFLOW_g)
-#define H5E_FCNTL            (H5OPEN H5E_FCNTL_g)
-H5_DLLVAR hid_t H5E_SEEKERROR_g;     /* Seek failed */
-H5_DLLVAR hid_t H5E_READERROR_g;     /* Read failed */
-H5_DLLVAR hid_t H5E_WRITEERROR_g;    /* Write failed */
-H5_DLLVAR hid_t H5E_CLOSEERROR_g;    /* Close failed */
-H5_DLLVAR hid_t H5E_OVERFLOW_g;      /* Address overflowed */
-H5_DLLVAR hid_t H5E_FCNTL_g;         /* File control (fcntl) failed */
-
-/* Resource errors */
-#define H5E_NOSPACE          (H5OPEN H5E_NOSPACE_g)
-#define H5E_CANTALLOC        (H5OPEN H5E_CANTALLOC_g)
-#define H5E_CANTCOPY         (H5OPEN H5E_CANTCOPY_g)
-#define H5E_CANTFREE         (H5OPEN H5E_CANTFREE_g)
-#define H5E_ALREADYEXISTS    (H5OPEN H5E_ALREADYEXISTS_g)
-#define H5E_CANTLOCK         (H5OPEN H5E_CANTLOCK_g)
-#define H5E_CANTUNLOCK       (H5OPEN H5E_CANTUNLOCK_g)
-#define H5E_CANTGC           (H5OPEN H5E_CANTGC_g)
-#define H5E_CANTGETSIZE      (H5OPEN H5E_CANTGETSIZE_g)
-#define H5E_OBJOPEN          (H5OPEN H5E_OBJOPEN_g)
-H5_DLLVAR hid_t H5E_NOSPACE_g;       /* No space available for allocation */
-H5_DLLVAR hid_t H5E_CANTALLOC_g;     /* Can't allocate space */
-H5_DLLVAR hid_t H5E_CANTCOPY_g;      /* Unable to copy object */
-H5_DLLVAR hid_t H5E_CANTFREE_g;      /* Unable to free object */
-H5_DLLVAR hid_t H5E_ALREADYEXISTS_g; /* Object already exists */
-H5_DLLVAR hid_t H5E_CANTLOCK_g;      /* Unable to lock object */
-H5_DLLVAR hid_t H5E_CANTUNLOCK_g;    /* Unable to unlock object */
-H5_DLLVAR hid_t H5E_CANTGC_g;        /* Unable to garbage collect */
-H5_DLLVAR hid_t H5E_CANTGETSIZE_g;   /* Unable to compute size */
-H5_DLLVAR hid_t H5E_OBJOPEN_g;       /* Object is already open */
-
-/* Heap errors */
-#define H5E_CANTRESTORE      (H5OPEN H5E_CANTRESTORE_g)
-#define H5E_CANTCOMPUTE      (H5OPEN H5E_CANTCOMPUTE_g)
-#define H5E_CANTEXTEND       (H5OPEN H5E_CANTEXTEND_g)
-#define H5E_CANTATTACH       (H5OPEN H5E_CANTATTACH_g)
-#define H5E_CANTUPDATE       (H5OPEN H5E_CANTUPDATE_g)
-#define H5E_CANTOPERATE      (H5OPEN H5E_CANTOPERATE_g)
-H5_DLLVAR hid_t H5E_CANTRESTORE_g;   /* Can't restore condition */
-H5_DLLVAR hid_t H5E_CANTCOMPUTE_g;   /* Can't compute value */
-H5_DLLVAR hid_t H5E_CANTEXTEND_g;    /* Can't extend heap's space */
-H5_DLLVAR hid_t H5E_CANTATTACH_g;    /* Can't attach object */
-H5_DLLVAR hid_t H5E_CANTUPDATE_g;    /* Can't update object */
-H5_DLLVAR hid_t H5E_CANTOPERATE_g;   /* Can't operate on object */
-
-/* Function entry/exit interface errors */
-#define H5E_CANTINIT         (H5OPEN H5E_CANTINIT_g)
-#define H5E_ALREADYINIT      (H5OPEN H5E_ALREADYINIT_g)
-#define H5E_CANTRELEASE      (H5OPEN H5E_CANTRELEASE_g)
-H5_DLLVAR hid_t H5E_CANTINIT_g;      /* Unable to initialize object */
-H5_DLLVAR hid_t H5E_ALREADYINIT_g;   /* Object already initialized */
-H5_DLLVAR hid_t H5E_CANTRELEASE_g;   /* Unable to release object */
-
-/* Property list errors */
-#define H5E_CANTGET          (H5OPEN H5E_CANTGET_g)
-#define H5E_CANTSET          (H5OPEN H5E_CANTSET_g)
-#define H5E_DUPCLASS         (H5OPEN H5E_DUPCLASS_g)
-#define H5E_SETDISALLOWED    (H5OPEN H5E_SETDISALLOWED_g)
-H5_DLLVAR hid_t H5E_CANTGET_g;       /* Can't get value */
-H5_DLLVAR hid_t H5E_CANTSET_g;       /* Can't set value */
-H5_DLLVAR hid_t H5E_DUPCLASS_g;      /* Duplicate class name in parent class */
-H5_DLLVAR hid_t H5E_SETDISALLOWED_g; /* Disallowed operation */
-
-/* Free space errors */
-#define H5E_CANTMERGE        (H5OPEN H5E_CANTMERGE_g)
-#define H5E_CANTREVIVE       (H5OPEN H5E_CANTREVIVE_g)
-#define H5E_CANTSHRINK       (H5OPEN H5E_CANTSHRINK_g)
-H5_DLLVAR hid_t H5E_CANTMERGE_g;     /* Can't merge objects */
-H5_DLLVAR hid_t H5E_CANTREVIVE_g;    /* Can't revive object */
-H5_DLLVAR hid_t H5E_CANTSHRINK_g;    /* Can't shrink container */
-
-/* Object header related errors */
-#define H5E_LINKCOUNT        (H5OPEN H5E_LINKCOUNT_g)
-#define H5E_VERSION          (H5OPEN H5E_VERSION_g)
-#define H5E_ALIGNMENT        (H5OPEN H5E_ALIGNMENT_g)
-#define H5E_BADMESG          (H5OPEN H5E_BADMESG_g)
-#define H5E_CANTDELETE       (H5OPEN H5E_CANTDELETE_g)
-#define H5E_BADITER          (H5OPEN H5E_BADITER_g)
-#define H5E_CANTPACK         (H5OPEN H5E_CANTPACK_g)
-#define H5E_CANTRESET        (H5OPEN H5E_CANTRESET_g)
-#define H5E_CANTRENAME       (H5OPEN H5E_CANTRENAME_g)
-H5_DLLVAR hid_t H5E_LINKCOUNT_g;     /* Bad object header link count */
-H5_DLLVAR hid_t H5E_VERSION_g;       /* Wrong version number */
-H5_DLLVAR hid_t H5E_ALIGNMENT_g;     /* Alignment error */
-H5_DLLVAR hid_t H5E_BADMESG_g;       /* Unrecognized message */
-H5_DLLVAR hid_t H5E_CANTDELETE_g;    /* Can't delete message */
-H5_DLLVAR hid_t H5E_BADITER_g;       /* Iteration failed */
-H5_DLLVAR hid_t H5E_CANTPACK_g;      /* Can't pack messages */
-H5_DLLVAR hid_t H5E_CANTRESET_g;     /* Can't reset object */
-H5_DLLVAR hid_t H5E_CANTRENAME_g;    /* Unable to rename object */
-
-/* System level errors */
-#define H5E_SYSERRSTR        (H5OPEN H5E_SYSERRSTR_g)
-H5_DLLVAR hid_t H5E_SYSERRSTR_g;     /* System error message */
-
-/* I/O pipeline errors */
-#define H5E_NOFILTER         (H5OPEN H5E_NOFILTER_g)
-#define H5E_CALLBACK         (H5OPEN H5E_CALLBACK_g)
-#define H5E_CANAPPLY         (H5OPEN H5E_CANAPPLY_g)
-#define H5E_SETLOCAL         (H5OPEN H5E_SETLOCAL_g)
-#define H5E_NOENCODER        (H5OPEN H5E_NOENCODER_g)
-#define H5E_CANTFILTER       (H5OPEN H5E_CANTFILTER_g)
-H5_DLLVAR hid_t H5E_NOFILTER_g;      /* Requested filter is not available */
-H5_DLLVAR hid_t H5E_CALLBACK_g;      /* Callback failed */
-H5_DLLVAR hid_t H5E_CANAPPLY_g;      /* Error from filter 'can apply' callback */
-H5_DLLVAR hid_t H5E_SETLOCAL_g;      /* Error from filter 'set local' callback */
-H5_DLLVAR hid_t H5E_NOENCODER_g;     /* Filter present but encoding disabled */
-H5_DLLVAR hid_t H5E_CANTFILTER_g;    /* Filter operation failed */
-
-/* Group related errors */
-#define H5E_CANTOPENOBJ      (H5OPEN H5E_CANTOPENOBJ_g)
-#define H5E_CANTCLOSEOBJ     (H5OPEN H5E_CANTCLOSEOBJ_g)
-#define H5E_COMPLEN          (H5OPEN H5E_COMPLEN_g)
-#define H5E_PATH             (H5OPEN H5E_PATH_g)
-H5_DLLVAR hid_t H5E_CANTOPENOBJ_g;   /* Can't open object */
-H5_DLLVAR hid_t H5E_CANTCLOSEOBJ_g;  /* Can't close object */
-H5_DLLVAR hid_t H5E_COMPLEN_g;       /* Name component is too long */
-H5_DLLVAR hid_t H5E_PATH_g;          /* Problem with path to object */
-
-/* No error */
-#define H5E_NONE_MINOR       (H5OPEN H5E_NONE_MINOR_g)
-H5_DLLVAR hid_t H5E_NONE_MINOR_g;    /* No error */
-
-/* Plugin errors */
-#define H5E_OPENERROR        (H5OPEN H5E_OPENERROR_g)
-H5_DLLVAR hid_t H5E_OPENERROR_g;     /* Can't open directory or file */
-
-/* File accessibilty errors */
-#define H5E_FILEEXISTS       (H5OPEN H5E_FILEEXISTS_g)
-#define H5E_FILEOPEN         (H5OPEN H5E_FILEOPEN_g)
-#define H5E_CANTCREATE       (H5OPEN H5E_CANTCREATE_g)
-#define H5E_CANTOPENFILE     (H5OPEN H5E_CANTOPENFILE_g)
-#define H5E_CANTCLOSEFILE    (H5OPEN H5E_CANTCLOSEFILE_g)
-#define H5E_NOTHDF5          (H5OPEN H5E_NOTHDF5_g)
-#define H5E_BADFILE          (H5OPEN H5E_BADFILE_g)
-#define H5E_TRUNCATED        (H5OPEN H5E_TRUNCATED_g)
-#define H5E_MOUNT            (H5OPEN H5E_MOUNT_g)
-H5_DLLVAR hid_t H5E_FILEEXISTS_g;    /* File already exists */
-H5_DLLVAR hid_t H5E_FILEOPEN_g;      /* File already open */
-H5_DLLVAR hid_t H5E_CANTCREATE_g;    /* Unable to create file */
-H5_DLLVAR hid_t H5E_CANTOPENFILE_g;  /* Unable to open file */
-H5_DLLVAR hid_t H5E_CANTCLOSEFILE_g; /* Unable to close file */
-H5_DLLVAR hid_t H5E_NOTHDF5_g;       /* Not an HDF5 file */
-H5_DLLVAR hid_t H5E_BADFILE_g;       /* Bad file ID accessed */
-H5_DLLVAR hid_t H5E_TRUNCATED_g;     /* File has been truncated */
-H5_DLLVAR hid_t H5E_MOUNT_g;         /* File mount error */
-
-/* Object atom related errors */
-#define H5E_BADATOM          (H5OPEN H5E_BADATOM_g)
-#define H5E_BADGROUP         (H5OPEN H5E_BADGROUP_g)
-#define H5E_CANTREGISTER     (H5OPEN H5E_CANTREGISTER_g)
-#define H5E_CANTINC          (H5OPEN H5E_CANTINC_g)
-#define H5E_CANTDEC          (H5OPEN H5E_CANTDEC_g)
-#define H5E_NOIDS            (H5OPEN H5E_NOIDS_g)
-H5_DLLVAR hid_t H5E_BADATOM_g;       /* Unable to find atom information (already closed?) */
-H5_DLLVAR hid_t H5E_BADGROUP_g;      /* Unable to find ID group information */
-H5_DLLVAR hid_t H5E_CANTREGISTER_g;  /* Unable to register new atom */
-H5_DLLVAR hid_t H5E_CANTINC_g;       /* Unable to increment reference count */
-H5_DLLVAR hid_t H5E_CANTDEC_g;       /* Unable to decrement reference count */
-H5_DLLVAR hid_t H5E_NOIDS_g;         /* Out of IDs for group */
-
-/* Cache related errors */
-#define H5E_CANTFLUSH        (H5OPEN H5E_CANTFLUSH_g)
-#define H5E_CANTSERIALIZE    (H5OPEN H5E_CANTSERIALIZE_g)
-#define H5E_CANTTAG          (H5OPEN H5E_CANTTAG_g)
-#define H5E_CANTLOAD         (H5OPEN H5E_CANTLOAD_g)
-#define H5E_PROTECT          (H5OPEN H5E_PROTECT_g)
-#define H5E_NOTCACHED        (H5OPEN H5E_NOTCACHED_g)
-#define H5E_SYSTEM           (H5OPEN H5E_SYSTEM_g)
-#define H5E_CANTINS          (H5OPEN H5E_CANTINS_g)
-#define H5E_CANTPROTECT      (H5OPEN H5E_CANTPROTECT_g)
-#define H5E_CANTUNPROTECT    (H5OPEN H5E_CANTUNPROTECT_g)
-#define H5E_CANTPIN          (H5OPEN H5E_CANTPIN_g)
-#define H5E_CANTUNPIN        (H5OPEN H5E_CANTUNPIN_g)
-#define H5E_CANTMARKDIRTY    (H5OPEN H5E_CANTMARKDIRTY_g)
-#define H5E_CANTDIRTY        (H5OPEN H5E_CANTDIRTY_g)
-#define H5E_CANTEXPUNGE      (H5OPEN H5E_CANTEXPUNGE_g)
-#define H5E_CANTRESIZE       (H5OPEN H5E_CANTRESIZE_g)
-#define H5E_CANTDEPEND       (H5OPEN H5E_CANTDEPEND_g)
-#define H5E_CANTUNDEPEND     (H5OPEN H5E_CANTUNDEPEND_g)
-#define H5E_CANTNOTIFY       (H5OPEN H5E_CANTNOTIFY_g)
-H5_DLLVAR hid_t H5E_CANTFLUSH_g;     /* Unable to flush data from cache */
-H5_DLLVAR hid_t H5E_CANTSERIALIZE_g; /* Unable to serialize data from cache */
-H5_DLLVAR hid_t H5E_CANTTAG_g;       /* Unable to tag metadata in the cache */
-H5_DLLVAR hid_t H5E_CANTLOAD_g;      /* Unable to load metadata into cache */
-H5_DLLVAR hid_t H5E_PROTECT_g;       /* Protected metadata error */
-H5_DLLVAR hid_t H5E_NOTCACHED_g;     /* Metadata not currently cached */
-H5_DLLVAR hid_t H5E_SYSTEM_g;        /* Internal error detected */
-H5_DLLVAR hid_t H5E_CANTINS_g;       /* Unable to insert metadata into cache */
-H5_DLLVAR hid_t H5E_CANTPROTECT_g;   /* Unable to protect metadata */
-H5_DLLVAR hid_t H5E_CANTUNPROTECT_g; /* Unable to unprotect metadata */
-H5_DLLVAR hid_t H5E_CANTPIN_g;       /* Unable to pin cache entry */
-H5_DLLVAR hid_t H5E_CANTUNPIN_g;     /* Unable to un-pin cache entry */
-H5_DLLVAR hid_t H5E_CANTMARKDIRTY_g; /* Unable to mark a pinned entry as dirty */
-H5_DLLVAR hid_t H5E_CANTDIRTY_g;     /* Unable to mark metadata as dirty */
-H5_DLLVAR hid_t H5E_CANTEXPUNGE_g;   /* Unable to expunge a metadata cache entry */
-H5_DLLVAR hid_t H5E_CANTRESIZE_g;    /* Unable to resize a metadata cache entry */
-H5_DLLVAR hid_t H5E_CANTDEPEND_g;    /* Unable to create a flush dependency */
-H5_DLLVAR hid_t H5E_CANTUNDEPEND_g;  /* Unable to destroy a flush dependency */
-H5_DLLVAR hid_t H5E_CANTNOTIFY_g;    /* Unable to notify object about action */
-
-/* Link related errors */
-#define H5E_TRAVERSE         (H5OPEN H5E_TRAVERSE_g)
-#define H5E_NLINKS           (H5OPEN H5E_NLINKS_g)
-#define H5E_NOTREGISTERED    (H5OPEN H5E_NOTREGISTERED_g)
-#define H5E_CANTMOVE         (H5OPEN H5E_CANTMOVE_g)
-#define H5E_CANTSORT         (H5OPEN H5E_CANTSORT_g)
-H5_DLLVAR hid_t H5E_TRAVERSE_g;      /* Link traversal failure */
-H5_DLLVAR hid_t H5E_NLINKS_g;        /* Too many soft links in path */
-H5_DLLVAR hid_t H5E_NOTREGISTERED_g; /* Link class not registered */
-H5_DLLVAR hid_t H5E_CANTMOVE_g;      /* Can't move object */
-H5_DLLVAR hid_t H5E_CANTSORT_g;      /* Can't sort objects */
-
-/* Parallel MPI errors */
-#define H5E_MPI              (H5OPEN H5E_MPI_g)
-#define H5E_MPIERRSTR        (H5OPEN H5E_MPIERRSTR_g)
-#define H5E_CANTRECV         (H5OPEN H5E_CANTRECV_g)
-H5_DLLVAR hid_t H5E_MPI_g;           /* Some MPI function failed */
-H5_DLLVAR hid_t H5E_MPIERRSTR_g;     /* MPI Error String */
-H5_DLLVAR hid_t H5E_CANTRECV_g;      /* Can't receive data */
-
-/* Dataspace errors */
-#define H5E_CANTCLIP         (H5OPEN H5E_CANTCLIP_g)
-#define H5E_CANTCOUNT        (H5OPEN H5E_CANTCOUNT_g)
-#define H5E_CANTSELECT       (H5OPEN H5E_CANTSELECT_g)
-#define H5E_CANTNEXT         (H5OPEN H5E_CANTNEXT_g)
-#define H5E_BADSELECT        (H5OPEN H5E_BADSELECT_g)
-#define H5E_CANTCOMPARE      (H5OPEN H5E_CANTCOMPARE_g)
-#define H5E_CANTAPPEND       (H5OPEN H5E_CANTAPPEND_g)
-H5_DLLVAR hid_t H5E_CANTCLIP_g;      /* Can't clip hyperslab region */
-H5_DLLVAR hid_t H5E_CANTCOUNT_g;     /* Can't count elements */
-H5_DLLVAR hid_t H5E_CANTSELECT_g;    /* Can't select hyperslab */
-H5_DLLVAR hid_t H5E_CANTNEXT_g;      /* Can't move to next iterator location */
-H5_DLLVAR hid_t H5E_BADSELECT_g;     /* Invalid selection */
-H5_DLLVAR hid_t H5E_CANTCOMPARE_g;   /* Can't compare objects */
-H5_DLLVAR hid_t H5E_CANTAPPEND_g;    /* Can't append object */
-
-/* Argument errors */
-#define H5E_UNINITIALIZED    (H5OPEN H5E_UNINITIALIZED_g)
-#define H5E_UNSUPPORTED      (H5OPEN H5E_UNSUPPORTED_g)
-#define H5E_BADTYPE          (H5OPEN H5E_BADTYPE_g)
-#define H5E_BADRANGE         (H5OPEN H5E_BADRANGE_g)
-#define H5E_BADVALUE         (H5OPEN H5E_BADVALUE_g)
-H5_DLLVAR hid_t H5E_UNINITIALIZED_g; /* Information is uinitialized */
-H5_DLLVAR hid_t H5E_UNSUPPORTED_g;   /* Feature is unsupported */
-H5_DLLVAR hid_t H5E_BADTYPE_g;       /* Inappropriate type */
-H5_DLLVAR hid_t H5E_BADRANGE_g;      /* Out of range */
-H5_DLLVAR hid_t H5E_BADVALUE_g;      /* Bad value */
-
-/* B-tree related errors */
-#define H5E_NOTFOUND         (H5OPEN H5E_NOTFOUND_g)
-#define H5E_EXISTS           (H5OPEN H5E_EXISTS_g)
-#define H5E_CANTENCODE       (H5OPEN H5E_CANTENCODE_g)
-#define H5E_CANTDECODE       (H5OPEN H5E_CANTDECODE_g)
-#define H5E_CANTSPLIT        (H5OPEN H5E_CANTSPLIT_g)
-#define H5E_CANTREDISTRIBUTE (H5OPEN H5E_CANTREDISTRIBUTE_g)
-#define H5E_CANTSWAP         (H5OPEN H5E_CANTSWAP_g)
-#define H5E_CANTINSERT       (H5OPEN H5E_CANTINSERT_g)
-#define H5E_CANTLIST         (H5OPEN H5E_CANTLIST_g)
-#define H5E_CANTMODIFY       (H5OPEN H5E_CANTMODIFY_g)
-#define H5E_CANTREMOVE       (H5OPEN H5E_CANTREMOVE_g)
-H5_DLLVAR hid_t H5E_NOTFOUND_g;      /* Object not found */
-H5_DLLVAR hid_t H5E_EXISTS_g;        /* Object already exists */
-H5_DLLVAR hid_t H5E_CANTENCODE_g;    /* Unable to encode value */
-H5_DLLVAR hid_t H5E_CANTDECODE_g;    /* Unable to decode value */
-H5_DLLVAR hid_t H5E_CANTSPLIT_g;     /* Unable to split node */
-H5_DLLVAR hid_t H5E_CANTREDISTRIBUTE_g; /* Unable to redistribute records */
-H5_DLLVAR hid_t H5E_CANTSWAP_g;      /* Unable to swap records */
-H5_DLLVAR hid_t H5E_CANTINSERT_g;    /* Unable to insert object */
-H5_DLLVAR hid_t H5E_CANTLIST_g;      /* Unable to list node */
-H5_DLLVAR hid_t H5E_CANTMODIFY_g;    /* Unable to modify record */
-H5_DLLVAR hid_t H5E_CANTREMOVE_g;    /* Unable to remove object */
-
-/* Datatype conversion errors */
-#define H5E_CANTCONVERT      (H5OPEN H5E_CANTCONVERT_g)
-#define H5E_BADSIZE          (H5OPEN H5E_BADSIZE_g)
-H5_DLLVAR hid_t H5E_CANTCONVERT_g;   /* Can't convert datatypes */
-H5_DLLVAR hid_t H5E_BADSIZE_g;       /* Bad size for object */
-
-#endif /* H5Epubgen_H */
diff --git a/src/H5Eterm.h b/src/H5Eterm.h
deleted file mode 100644
index bf39a6b..0000000
--- a/src/H5Eterm.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group.                                               *
- * Copyright by the Board of Trustees of the University of Illinois.         *
- * All rights reserved.                                                      *
- *                                                                           *
- * This file is part of HDF5.  The full HDF5 copyright notice, including     *
- * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-/* Generated automatically by bin/make_err -- do not edit */
-/* Add new errors to H5err.txt file */
-
-
-#ifndef _H5Eterm_H
-#define _H5Eterm_H
-
-/* Reset major error IDs */
-    
-H5E_FUNC_g=    
-H5E_FILE_g=    
-H5E_SOHM_g=    
-H5E_SYM_g=    
-H5E_PLUGIN_g=    
-H5E_VFL_g=    
-H5E_INTERNAL_g=    
-H5E_BTREE_g=    
-H5E_REFERENCE_g=    
-H5E_DATASPACE_g=    
-H5E_RESOURCE_g=    
-H5E_RS_g=    
-H5E_FARRAY_g=    
-H5E_HEAP_g=    
-H5E_ATTR_g=    
-H5E_IO_g=    
-H5E_EFL_g=    
-H5E_TST_g=    
-H5E_FSPACE_g=    
-H5E_DATASET_g=    
-H5E_STORAGE_g=    
-H5E_LINK_g=    
-H5E_PLIST_g=    
-H5E_DATATYPE_g=    
-H5E_OHDR_g=    
-H5E_ATOM_g=    
-H5E_NONE_MAJOR_g=    
-H5E_SLIST_g=    
-H5E_ARGS_g=    
-H5E_EARRAY_g=    
-H5E_PLINE_g=    
-H5E_ERROR_g=    
-H5E_CACHE_g= (-1);
-
-/* Reset minor error IDs */
-
-
-/* Generic low-level file I/O errors */    
-H5E_SEEKERROR_g=    
-H5E_READERROR_g=    
-H5E_WRITEERROR_g=    
-H5E_CLOSEERROR_g=    
-H5E_OVERFLOW_g=    
-H5E_FCNTL_g=
-
-/* Resource errors */    
-H5E_NOSPACE_g=    
-H5E_CANTALLOC_g=    
-H5E_CANTCOPY_g=    
-H5E_CANTFREE_g=    
-H5E_ALREADYEXISTS_g=    
-H5E_CANTLOCK_g=    
-H5E_CANTUNLOCK_g=    
-H5E_CANTGC_g=    
-H5E_CANTGETSIZE_g=    
-H5E_OBJOPEN_g=
-
-/* Heap errors */    
-H5E_CANTRESTORE_g=    
-H5E_CANTCOMPUTE_g=    
-H5E_CANTEXTEND_g=    
-H5E_CANTATTACH_g=    
-H5E_CANTUPDATE_g=    
-H5E_CANTOPERATE_g=
-
-/* Function entry/exit interface errors */    
-H5E_CANTINIT_g=    
-H5E_ALREADYINIT_g=    
-H5E_CANTRELEASE_g=
-
-/* Property list errors */    
-H5E_CANTGET_g=    
-H5E_CANTSET_g=    
-H5E_DUPCLASS_g=    
-H5E_SETDISALLOWED_g=
-
-/* Free space errors */    
-H5E_CANTMERGE_g=    
-H5E_CANTREVIVE_g=    
-H5E_CANTSHRINK_g=
-
-/* Object header related errors */    
-H5E_LINKCOUNT_g=    
-H5E_VERSION_g=    
-H5E_ALIGNMENT_g=    
-H5E_BADMESG_g=    
-H5E_CANTDELETE_g=    
-H5E_BADITER_g=    
-H5E_CANTPACK_g=    
-H5E_CANTRESET_g=    
-H5E_CANTRENAME_g=
-
-/* System level errors */    
-H5E_SYSERRSTR_g=
-
-/* I/O pipeline errors */    
-H5E_NOFILTER_g=    
-H5E_CALLBACK_g=    
-H5E_CANAPPLY_g=    
-H5E_SETLOCAL_g=    
-H5E_NOENCODER_g=    
-H5E_CANTFILTER_g=
-
-/* Group related errors */    
-H5E_CANTOPENOBJ_g=    
-H5E_CANTCLOSEOBJ_g=    
-H5E_COMPLEN_g=    
-H5E_PATH_g=
-
-/* No error */    
-H5E_NONE_MINOR_g=
-
-/* Plugin errors */    
-H5E_OPENERROR_g=
-
-/* File accessibilty errors */    
-H5E_FILEEXISTS_g=    
-H5E_FILEOPEN_g=    
-H5E_CANTCREATE_g=    
-H5E_CANTOPENFILE_g=    
-H5E_CANTCLOSEFILE_g=    
-H5E_NOTHDF5_g=    
-H5E_BADFILE_g=    
-H5E_TRUNCATED_g=    
-H5E_MOUNT_g=
-
-/* Object atom related errors */    
-H5E_BADATOM_g=    
-H5E_BADGROUP_g=    
-H5E_CANTREGISTER_g=    
-H5E_CANTINC_g=    
-H5E_CANTDEC_g=    
-H5E_NOIDS_g=
-
-/* Cache related errors */    
-H5E_CANTFLUSH_g=    
-H5E_CANTSERIALIZE_g=    
-H5E_CANTTAG_g=    
-H5E_CANTLOAD_g=    
-H5E_PROTECT_g=    
-H5E_NOTCACHED_g=    
-H5E_SYSTEM_g=    
-H5E_CANTINS_g=    
-H5E_CANTPROTECT_g=    
-H5E_CANTUNPROTECT_g=    
-H5E_CANTPIN_g=    
-H5E_CANTUNPIN_g=    
-H5E_CANTMARKDIRTY_g=    
-H5E_CANTDIRTY_g=    
-H5E_CANTEXPUNGE_g=    
-H5E_CANTRESIZE_g=    
-H5E_CANTDEPEND_g=    
-H5E_CANTUNDEPEND_g=    
-H5E_CANTNOTIFY_g=
-
-/* Link related errors */    
-H5E_TRAVERSE_g=    
-H5E_NLINKS_g=    
-H5E_NOTREGISTERED_g=    
-H5E_CANTMOVE_g=    
-H5E_CANTSORT_g=
-
-/* Parallel MPI errors */    
-H5E_MPI_g=    
-H5E_MPIERRSTR_g=    
-H5E_CANTRECV_g=
-
-/* Dataspace errors */    
-H5E_CANTCLIP_g=    
-H5E_CANTCOUNT_g=    
-H5E_CANTSELECT_g=    
-H5E_CANTNEXT_g=    
-H5E_BADSELECT_g=    
-H5E_CANTCOMPARE_g=    
-H5E_CANTAPPEND_g=
-
-/* Argument errors */    
-H5E_UNINITIALIZED_g=    
-H5E_UNSUPPORTED_g=    
-H5E_BADTYPE_g=    
-H5E_BADRANGE_g=    
-H5E_BADVALUE_g=
-
-/* B-tree related errors */    
-H5E_NOTFOUND_g=    
-H5E_EXISTS_g=    
-H5E_CANTENCODE_g=    
-H5E_CANTDECODE_g=    
-H5E_CANTSPLIT_g=    
-H5E_CANTREDISTRIBUTE_g=    
-H5E_CANTSWAP_g=    
-H5E_CANTINSERT_g=    
-H5E_CANTLIST_g=    
-H5E_CANTMODIFY_g=    
-H5E_CANTREMOVE_g=
-
-/* Datatype conversion errors */    
-H5E_CANTCONVERT_g=    
-H5E_BADSIZE_g= (-1);
-
-#endif /* H5Eterm_H */
diff --git a/src/H5F.c b/src/H5F.c
index d3b9fc8..041bd35 100644
--- a/src/H5F.c
+++ b/src/H5F.c
@@ -17,10 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5F__init_pub_interface
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /***********/
@@ -66,6 +63,9 @@
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -88,21 +88,21 @@ static const H5I_class_t H5I_FILE_CLS[1] = {{
 
 /*--------------------------------------------------------------------------
 NAME
-   H5F__init_pub_interface -- Initialize interface-specific information
+   H5F__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5F__init_pub_interface()
+    herr_t H5F__init_package()
 RETURNS
     Non-negative on success/Negative on failure
 DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5F_init() currently).
+    Initializes any interface-specific data or routines.
 
 --------------------------------------------------------------------------*/
-static herr_t
-H5F__init_pub_interface(void)
+herr_t
+H5F__init_package(void)
 {
-    herr_t          ret_value                = SUCCEED;   /* Return value */
-    FUNC_ENTER_STATIC
+    herr_t ret_value = SUCCEED;   /* Return value */
+
+    FUNC_ENTER_PACKAGE
 
     /*
      * Initialize the atom group for the file IDs.
@@ -110,40 +110,13 @@ H5F__init_pub_interface(void)
     if(H5I_register_type(H5I_FILE_CLS) < 0)
         HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, FAIL, "unable to initialize interface")
 
-    ret_value = H5F_init();
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* H5F__init_pub_interface() */
-
-
-/*-------------------------------------------------------------------------
- * Function:	H5F_init
- *
- * Purpose:	Initialize the interface from some other layer.
- *
- * Return:	Success:	non-negative
- *		Failure:	negative
- *
- * Programmer:	Robb Matzke
- *              Wednesday, December 16, 1998
- *
- *-------------------------------------------------------------------------
- */
-herr_t
-H5F_init(void)
-{
-    herr_t ret_value = SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI(FAIL)
-    /* FUNC_ENTER() does all the work */
-
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5F_init() */
+} /* H5F__init_package() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5F_term_interface
+ * Function:	H5F_term_package
  *
  * Purpose:	Terminate this interface: free all memory and reset global
  *		variables to their initial values.  Release all ID groups
@@ -161,13 +134,13 @@ done:
  *-------------------------------------------------------------------------
  */
 int
-H5F_term_interface(void)
+H5F_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5_PKG_INIT_VAR) {
 	if(H5I_nmembers(H5I_FILE) > 0) {
             (void)H5I_clear_type(H5I_FILE, FALSE, FALSE);
             n++; /*H5I*/
@@ -176,20 +149,17 @@ H5F_term_interface(void)
             /* Make certain we've cleaned up all the shared file objects */
             H5F_sfile_assert_num(0);
 
-            /* Close deprecated interface */
-            n += H5F__term_deprec_interface();
-
             /* Destroy the file object id group */
-	    (void)H5I_dec_type_ref(H5I_FILE);
-            n++; /*H5I*/
+	    n += (H5I_dec_type_ref(H5I_FILE) > 0);
 
 	    /* Mark closed */
-	    H5_interface_initialize_g = 0;
+            if(0 == n)
+                H5_PKG_INIT_VAR = FALSE;
 	} /* end else */
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5F_term_interface() */
+} /* end H5F_term_package() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5FA.c b/src/H5FA.c
index bfb2a00..b0d13ec 100644
--- a/src/H5FA.c
+++ b/src/H5FA.c
@@ -29,7 +29,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5FA_MODULE
+#include "H5FAmodule.h"         /* This source code file is part of the H5FA module */
 
 /***********************/
 /* Other Packages Used */
@@ -70,6 +70,9 @@
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Fixed array client ID to class mapping */
 
 /* Remember to add client ID to H5FA_cls_id_t in H5FAprivate.h when adding a new
diff --git a/src/H5FAcache.c b/src/H5FAcache.c
index b95da40..f3396be 100644
--- a/src/H5FAcache.c
+++ b/src/H5FAcache.c
@@ -28,7 +28,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5FA_MODULE
+#include "H5FAmodule.h"         /* This source code file is part of the H5FA module */
 
 
 /***********************/
diff --git a/src/H5FAdbg.c b/src/H5FAdbg.c
index 6a84fc9..2f8fda2 100644
--- a/src/H5FAdbg.c
+++ b/src/H5FAdbg.c
@@ -26,7 +26,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5FA_MODULE
+#include "H5FAmodule.h"         /* This source code file is part of the H5FA module */
 
 
 /***********************/
diff --git a/src/H5FAdblkpage.c b/src/H5FAdblkpage.c
index e1ea3ac..00eb398 100644
--- a/src/H5FAdblkpage.c
+++ b/src/H5FAdblkpage.c
@@ -26,7 +26,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5FA_MODULE
+#include "H5FAmodule.h"         /* This source code file is part of the H5FA module */
 
 
 /***********************/
diff --git a/src/H5FAdblock.c b/src/H5FAdblock.c
index 42dafeb..71b618c 100644
--- a/src/H5FAdblock.c
+++ b/src/H5FAdblock.c
@@ -26,7 +26,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5FA_MODULE
+#include "H5FAmodule.h"         /* This source code file is part of the H5FA module */
 
 
 /***********************/
diff --git a/src/H5FAhdr.c b/src/H5FAhdr.c
index 9083a52..49d22f3 100644
--- a/src/H5FAhdr.c
+++ b/src/H5FAhdr.c
@@ -26,7 +26,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5FA_MODULE
+#include "H5FAmodule.h"         /* This source code file is part of the H5FA module */
 
 
 /***********************/
diff --git a/src/H5FAmodule.h b/src/H5FAmodule.h
new file mode 100644
index 0000000..e46b071
--- /dev/null
+++ b/src/H5FAmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5FA package.  Including this header means that the source file
+ *		is part of the H5FA package.
+ */
+#ifndef _H5FAmodule_H
+#define _H5FAmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5FA_MODULE
+#define H5_MY_PKG       H5FA
+#define H5_MY_PKG_ERR   H5E_FARRAY
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5FAmodule_H */
+
diff --git a/src/H5FApkg.h b/src/H5FApkg.h
index bed9c83..ddf3a07 100644
--- a/src/H5FApkg.h
+++ b/src/H5FApkg.h
@@ -20,7 +20,7 @@
  *		the H5FA package.  Source files outside the H5FA package should
  *		include H5FAprivate.h instead.
  */
-#if !(defined(H5FA_PACKAGE) | defined(H5FA_MODULE))
+#if !(defined(H5FA_FRIEND) | defined(H5FA_MODULE))
 #error "Do not include this file outside the H5FA package!"
 #endif
 
@@ -43,16 +43,6 @@
 /* #define H5FA_DEBUG */
 
 
-/* If this package header is being included in one of the H5FA modules, define
- *      the proper control macros for the generic FUNC_ENTER/LEAVE and error
- *      reporting macros.
- */
-#ifdef H5FA_MODULE
-#define H5_MY_PKG       H5FA
-#define H5_MY_PKG_ERR   H5E_FARRAY
-#define H5_MY_PKG_INIT  NO
-#endif /* H5FA_MODULE */
-
 /* Fill value for fixed array test class */
 #ifdef H5FA_TESTING
 #define H5FA_TEST_FILL          ((uint64_t)ULLONG_MAX)
diff --git a/src/H5FAstat.c b/src/H5FAstat.c
index bed6c6e..4ded4c1 100644
--- a/src/H5FAstat.c
+++ b/src/H5FAstat.c
@@ -26,7 +26,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5FA_MODULE
+#include "H5FAmodule.h"         /* This source code file is part of the H5FA module */
 
 
 /***********************/
diff --git a/src/H5FAtest.c b/src/H5FAtest.c
index acb2d06..528f550 100644
--- a/src/H5FAtest.c
+++ b/src/H5FAtest.c
@@ -24,7 +24,7 @@
 /* Module Declaration */
 /**********************/
 
-#define H5FA_MODULE
+#include "H5FAmodule.h"         /* This source code file is part of the H5FA module */
 #define H5FA_TESTING
 
 
diff --git a/src/H5FD.c b/src/H5FD.c
index c4ee11f..9e183bd 100644
--- a/src/H5FD.c
+++ b/src/H5FD.c
@@ -28,11 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-#define H5FD_PACKAGE		/*suppress error about including H5FDpkg  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5FD_init_interface
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
+#include "H5FDmodule.h"         /* This source code file is part of the H5FD module */
 
 
 /***********/
@@ -65,12 +62,7 @@
 /********************/
 /* Local Prototypes */
 /********************/
-static herr_t H5FD_pl_copy(void *(*copy_func)(const void *), size_t pl_size,
-    const void *old_pl, void **copied_pl);
-static herr_t H5FD_pl_close(hid_t driver_id, herr_t (*free_func)(void *),
-    void *pl);
 static herr_t H5FD_free_cls(H5FD_class_t *cls);
-static herr_t H5FD_fapl_copy(hid_t driver_id, const void *fapl, void **copied_fapl);
 static int H5FD_query(const H5FD_t *f, unsigned long *flags/*out*/);
 static int H5FD_driver_query(const H5FD_class_t *driver, unsigned long *flags/*out*/);
 
@@ -78,6 +70,9 @@ static int H5FD_driver_query(const H5FD_class_t *driver, unsigned long *flags/*o
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -113,53 +108,24 @@ static const H5I_class_t H5I_VFL_CLS[1] = {{
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FD_init
- *
- * Purpose:	Initialize the interface from some other package.
- *
- * Return:	Success:	non-negative
- *		Failure:	negative
- *
- * Programmer:	Quincey Koziol
- *              Thursday, January  3, 2007
- *
- *-------------------------------------------------------------------------
- */
-herr_t
-H5FD_init(void)
-{
-    herr_t ret_value = SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI(FAIL)
-    /* FUNC_ENTER() does all the work */
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_init() */
-
-
-/*-------------------------------------------------------------------------
- * Function:	H5FD_init_interface
+ * Function:	H5FD__init_package
  *
  * Purpose:	Initialize the virtual file layer.
  *
  * Return:	Success:	Non-negative
- *
  *		Failure:	Negative
  *
  * Programmer:	Robb Matzke
  *              Monday, July 26, 1999
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
-static herr_t
-H5FD_init_interface(void)
+herr_t
+H5FD__init_package(void)
 {
     herr_t      ret_value = SUCCEED;       /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_PACKAGE
 
     if(H5I_register_type(H5I_VFL_CLS) < 0)
 	HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "unable to initialize interface")
@@ -169,11 +135,11 @@ H5FD_init_interface(void)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_init_interface() */
+} /* end H5FD__init_package() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FD_term_interface
+ * Function:	H5FD_term_package
  *
  * Purpose:	Terminate this interface: free all memory and reset global
  *		variables to their initial values.  Release all ID groups
@@ -182,40 +148,37 @@ done:
  * Return:	Success:	Positive if anything was done that might
  *				have affected other interfaces; zero
  *				otherwise.
- *
  *		Failure:        Never fails.
  *
  * Programmer:	Robb Matzke
  *              Friday, February 19, 1999
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 int
-H5FD_term_interface(void)
+H5FD_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5_PKG_INIT_VAR) {
 	if(H5I_nmembers(H5I_VFL) > 0) {
 	    (void)H5I_clear_type(H5I_VFL, FALSE, FALSE);
             n++; /*H5I*/
 	} /* end if */
         else {
             /* Destroy the VFL driver id group */
-	    (void)H5I_dec_type_ref(H5I_VFL);
-            n++; /*H5I*/
+	    n += (H5I_dec_type_ref(H5I_VFL) > 0);
 
 	    /* Mark closed */
-	    H5_interface_initialize_g = 0;
+            if(0 == n)
+                H5_PKG_INIT_VAR = FALSE;
 	} /* end else */
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5FD_term_interface() */
+} /* end H5FD_term_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -223,7 +186,7 @@ H5FD_term_interface(void)
  *
  * Purpose:	Frees a file driver class struct and returns an indication of
  *		success. This function is used as the free callback for the
- *		virtual file layer object identifiers (cf H5FD_init_interface).
+ *		virtual file layer object identifiers (cf H5FD__init_package).
  *
  * Return:	Success:	Non-negative
  *
@@ -350,7 +313,7 @@ H5FD_register(const void *_cls, size_t size, hbool_t app_ref)
     const H5FD_class_t	*cls = (const H5FD_class_t *)_cls;
     H5FD_class_t	*saved = NULL;
     H5FD_mem_t		type;
-    hid_t		ret_value;
+    hid_t		ret_value = H5I_INVALID_HID;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -450,16 +413,17 @@ H5FD_get_class(hid_t id)
 	ret_value = (H5FD_class_t *)H5I_object(id);
     else {
         H5P_genplist_t *plist;      /* Property list pointer */
-        hid_t driver_id = -1;
 
         /* Get the plist structure */
         if(NULL == (plist = (H5P_genplist_t *)H5I_object(id)))
             HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, NULL, "can't find object for ID")
 
         if(TRUE == H5P_isa_class(id, H5P_FILE_ACCESS)) {
-            if(H5P_get(plist, H5F_ACS_FILE_DRV_ID_NAME, &driver_id) < 0)
-                HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get driver ID")
-            ret_value = H5FD_get_class(driver_id);
+            H5FD_driver_prop_t driver_prop;         /* Property for driver ID & info */
+
+            if(H5P_peek(plist, H5F_ACS_FILE_DRV_NAME, &driver_prop) < 0)
+                HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get driver ID & info")
+            ret_value = H5FD_get_class(driver_prop.driver_id);
         } /* end if */
         else
             HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a driver id or file access property list")
@@ -614,96 +578,6 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FD_pl_copy
- *
- * Purpose:	Copies the driver-specific part of the a property list.
- *              This is common code, used by both the dataset transfer and
- *              file access property list routines.
- *
- * Return:	Success:	non-negative
- *
- *		Failure:	negative
- *
- * Programmer:	Quincey Koziol
- *              Thursday, October 23, 2003
- *
- * Modifications:
- *  Pedro Vicente Nunes, Wednesday, July 26, 2006
- *  added a HGOTO_ERROR call in the case the copy function returns NULL
- *
- *-------------------------------------------------------------------------
- */
-static herr_t
-H5FD_pl_copy(void *(*copy_func)(const void *), size_t pl_size, const void *old_pl, void **copied_pl)
-{
-    void *new_pl = NULL;        /* Copy of property list */
-    herr_t ret_value=SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI_NOINIT
-
-    /* Copy old pl, if one exists */
-    if(old_pl) {
-        /* Allow the driver to copy or do it ourselves */
-        if(copy_func) {
-            new_pl = (copy_func)(old_pl);
-            if(new_pl==NULL)
-                HGOTO_ERROR(H5E_VFL, H5E_NOSPACE, FAIL, "property list copy failed")
-        } else if(pl_size>0) {
-            if((new_pl = H5MM_malloc(pl_size))==NULL)
-                HGOTO_ERROR(H5E_VFL, H5E_NOSPACE, FAIL, "property list allocation failed")
-            HDmemcpy(new_pl, old_pl, pl_size);
-        } else
-            HGOTO_ERROR(H5E_VFL, H5E_UNSUPPORTED, FAIL, "no way to copy driver property list")
-    } /* end if */
-
-    /* Set copied value */
-    *copied_pl=new_pl;
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_pl_copy() */
-
-
-/*-------------------------------------------------------------------------
- * Function:	H5FD_pl_close
- *
- * Purpose:	Closes a driver for a property list
- *              This is common code, used by both the dataset transfer and
- *              file access property list routines.
- *
- * Return:	Success:	non-negative
- *		Failure:	negative
- *
- * Programmer:	Quincey Koziol
- *              Thursday, October 23, 2003
- *
- *-------------------------------------------------------------------------
- */
-static herr_t
-H5FD_pl_close(hid_t driver_id, herr_t (*free_func)(void *), void *pl)
-{
-    herr_t ret_value = SUCCEED;         /* Return value */
-
-    FUNC_ENTER_NOAPI_NOINIT
-
-    /* Allow driver to free or do it ourselves */
-    if(pl && free_func) {
-	if((free_func)(pl) < 0)
-	    HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver free request failed")
-    } /* end if */
-    else
-	H5MM_xfree(pl);
-
-    /* Decrement reference count for driver */
-    if(H5I_dec_ref(driver_id) < 0)
-        HGOTO_ERROR(H5E_VFL, H5E_CANTDEC, FAIL, "can't decrement reference count for driver")
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_pl_close() */
-
-
-/*-------------------------------------------------------------------------
  * Function:	H5FD_fapl_get
  *
  * Purpose:	Gets the file access property list associated with a file.
@@ -725,8 +599,6 @@ done:
  * Programmer:	Robb Matzke
  *              Friday, August 13, 1999
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 void *
@@ -747,88 +619,6 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FD_fapl_open
- *
- * Purpose:	Mark a driver as used by a file access property list
- *
- * Return:	Success:	non-negative
- *
- *		Failure:	negative
- *
- * Programmer:	Quincey Koziol
- *              Thursday, October 23, 2003
- *
- * Modifications:
- *
- *-------------------------------------------------------------------------
- */
-herr_t
-H5FD_fapl_open(H5P_genplist_t *plist, hid_t driver_id, const void *driver_info)
-{
-    void *copied_driver_info = NULL;           /* Temporary VFL driver info */
-    herr_t ret_value = SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI(FAIL)
-
-    /* Increment the reference count on driver and copy driver info */
-    if(H5I_inc_ref(driver_id, FALSE) < 0)
-        HGOTO_ERROR(H5E_FILE, H5E_CANTINC, FAIL, "unable to increment ref count on VFL driver")
-    if(H5FD_fapl_copy(driver_id, driver_info, &copied_driver_info) < 0)
-        HGOTO_ERROR(H5E_FILE, H5E_CANTCOPY, FAIL, "can't copy VFL driver info")
-
-    /* Set the driver properties for the list */
-    if(H5P_set(plist, H5F_ACS_FILE_DRV_ID_NAME, &driver_id) < 0)
-        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, FAIL, "can't set driver ID")
-    if(H5P_set(plist, H5F_ACS_FILE_DRV_INFO_NAME, &copied_driver_info) < 0)
-        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, FAIL, "can't set driver info")
-    copied_driver_info = NULL;
-
-done:
-    if(ret_value < 0)
-        if(copied_driver_info && H5FD_fapl_close(driver_id, copied_driver_info) < 0)
-            HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEOBJ, FAIL, "can't close copy of driver info")
-
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_fapl_open() */
-
-
-/*-------------------------------------------------------------------------
- * Function:	H5FD_fapl_copy
- *
- * Purpose:	Copies the driver-specific part of the file access property
- *		list.
- *
- * Return:	Success:	non-negative
- *
- *		Failure:	negative
- *
- * Programmer:	Robb Matzke
- *              Tuesday, August  3, 1999
- *
- *-------------------------------------------------------------------------
- */
-static herr_t
-H5FD_fapl_copy(hid_t driver_id, const void *old_fapl, void **copied_fapl)
-{
-    H5FD_class_t *driver;
-    herr_t ret_value = SUCCEED;       /* Return value */
-
-    FUNC_ENTER_NOAPI_NOINIT
-
-    /* Check args */
-    if(NULL == (driver = (H5FD_class_t *)H5I_object(driver_id)))
-	HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a driver ID")
-
-    /* Copy the file access property list */
-    if(H5FD_pl_copy(driver->fapl_copy, driver->fapl_size, old_fapl, copied_fapl) < 0)
-        HGOTO_ERROR(H5E_VFL, H5E_UNSUPPORTED, FAIL, "can't copy driver file access property list")
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-}
-
-
-/*-------------------------------------------------------------------------
  * Function:	H5FD_fapl_close
  *
  * Purpose:	Closes a driver for a dataset transfer property list
@@ -839,26 +629,32 @@ done:
  * Programmer:	Robb Matzke
  *              Tuesday, August  3, 1999
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 herr_t
-H5FD_fapl_close(hid_t driver_id, void *fapl)
+H5FD_fapl_close(hid_t driver_id, const void *driver_info)
 {
-    H5FD_class_t	*driver = NULL;
     herr_t      ret_value = SUCCEED;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Check args */
     if(driver_id > 0) {
+        H5FD_class_t	*driver;
+
+        /* Retrieve the driver for the ID */
         if(NULL == (driver = (H5FD_class_t *)H5I_object(driver_id)))
             HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a driver ID")
 
-        /* Close the driver for the property list */
-        if(H5FD_pl_close(driver_id, driver->fapl_free, fapl) < 0)
-            HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver fapl_free request failed")
+        /* Allow driver to free info or do it ourselves */
+        if(driver_info) {
+            if(driver->fapl_free) {
+                if((driver->fapl_free)((void *)driver_info) < 0)        /* Casting away const OK -QAK */
+                    HGOTO_ERROR(H5E_VFL, H5E_CANTFREE, FAIL, "driver free request failed")
+            } /* end if */
+            else
+                H5MM_xfree((void *)driver_info);        /* Casting away const OK -QAK */
+        } /* end if */
     } /* end if */
 
 done:
@@ -970,11 +766,11 @@ H5FD_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
 {
     H5FD_class_t	*driver;                /* VFD for file */
     H5FD_t		*file = NULL;           /* VFD file struct */
-    hid_t               driver_id = -1;         /* VFD ID */
+    H5FD_driver_prop_t  driver_prop;            /* Property for driver ID & info */
     H5P_genplist_t      *plist;                 /* Property list pointer */
     unsigned long       driver_flags = 0;       /* File-inspecific driver feature flags */
     H5FD_file_image_info_t file_image_info;     /* Initial file image */
-    H5FD_t		*ret_value;             /* Return value */
+    H5FD_t		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -987,11 +783,11 @@ H5FD_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list")
 
     /* Get the VFD to open the file with */
-    if(H5P_get(plist, H5F_ACS_FILE_DRV_ID_NAME, &driver_id) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get driver ID")
+    if(H5P_peek(plist, H5F_ACS_FILE_DRV_NAME, &driver_prop) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get driver ID & info")
 
     /* Get driver info */
-    if(NULL == (driver = (H5FD_class_t *)H5I_object(driver_id)))
+    if(NULL == (driver = (H5FD_class_t *)H5I_object(driver_prop.driver_id)))
 	HGOTO_ERROR(H5E_VFL, H5E_BADVALUE, NULL, "invalid driver ID in file access property list")
     if(NULL == driver->open)
 	HGOTO_ERROR(H5E_VFL, H5E_UNSUPPORTED, NULL, "file driver has no `open' method")
@@ -1000,7 +796,7 @@ H5FD_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
     H5FD_driver_query(driver, &driver_flags);
 
     /* Get initial file image info */
-    if(H5P_get(plist, H5F_ACS_FILE_IMAGE_INFO_NAME, &file_image_info) < 0)
+    if(H5P_peek(plist, H5F_ACS_FILE_IMAGE_INFO_NAME, &file_image_info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get file image info")
 
     /* If an image is provided, make sure the driver supports this feature */
@@ -1019,7 +815,7 @@ H5FD_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
      * Fill in public fields. We must increment the reference count on the
      * driver ID to prevent it from being freed while this file is open.
      */
-    file->driver_id = driver_id;
+    file->driver_id = driver_prop.driver_id;
     if(H5I_inc_ref(file->driver_id, FALSE) < 0)
         HGOTO_ERROR(H5E_VFL, H5E_CANTINC, NULL, "unable to increment ref count on VFL driver")
     file->cls = driver;
@@ -1189,7 +985,7 @@ done:
 int
 H5FD_cmp(const H5FD_t *f1, const H5FD_t *f2)
 {
-    int	ret_value;
+    int	ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI(-1) /*return value is arbitrary*/
 
@@ -1602,7 +1398,7 @@ done:
 haddr_t
 H5FD_get_maxaddr(const H5FD_t *file)
 {
-    haddr_t ret_value;          /* Return value */
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 
diff --git a/src/H5FDcore.c b/src/H5FDcore.c
index e553f6b..17ec07c 100644
--- a/src/H5FDcore.c
+++ b/src/H5FDcore.c
@@ -22,8 +22,7 @@
  *              access to small, temporary hdf5 files.
  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5FD_core_init_interface
+#include "H5FDdrvr_module.h" /* This source code file is part of the H5FD driver module */
 
 #include "H5private.h"      /* Generic Functions            */
 #include "H5Eprivate.h"     /* Error handling               */
@@ -122,57 +121,57 @@ typedef struct H5FD_core_fapl_t {
                                 (size_t)((A)+(Z))<(size_t)(A))
 
 /* Prototypes */
-static herr_t H5FD_core_add_dirty_region(H5FD_core_t *file, haddr_t start, haddr_t end);
-static herr_t H5FD_core_destroy_dirty_list(H5FD_core_t *file);
-static herr_t H5FD_core_write_to_bstore(H5FD_core_t *file, haddr_t addr, size_t size);
-static herr_t H5FD_core_term(void);
-static void *H5FD_core_fapl_get(H5FD_t *_file);
-static H5FD_t *H5FD_core_open(const char *name, unsigned flags, hid_t fapl_id,
+static herr_t H5FD__core_add_dirty_region(H5FD_core_t *file, haddr_t start, haddr_t end);
+static herr_t H5FD__core_destroy_dirty_list(H5FD_core_t *file);
+static herr_t H5FD__core_write_to_bstore(H5FD_core_t *file, haddr_t addr, size_t size);
+static herr_t H5FD__core_term(void);
+static void *H5FD__core_fapl_get(H5FD_t *_file);
+static H5FD_t *H5FD__core_open(const char *name, unsigned flags, hid_t fapl_id,
             haddr_t maxaddr);
-static herr_t H5FD_core_close(H5FD_t *_file);
-static int H5FD_core_cmp(const H5FD_t *_f1, const H5FD_t *_f2);
-static herr_t H5FD_core_query(const H5FD_t *_f1, unsigned long *flags);
-static haddr_t H5FD_core_get_eoa(const H5FD_t *_file, H5FD_mem_t type);
-static herr_t H5FD_core_set_eoa(H5FD_t *_file, H5FD_mem_t type, haddr_t addr);
-static haddr_t H5FD_core_get_eof(const H5FD_t *_file, H5FD_mem_t type);
-static herr_t  H5FD_core_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle);
-static herr_t H5FD_core_read(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr,
+static herr_t H5FD__core_close(H5FD_t *_file);
+static int H5FD__core_cmp(const H5FD_t *_f1, const H5FD_t *_f2);
+static herr_t H5FD__core_query(const H5FD_t *_f1, unsigned long *flags);
+static haddr_t H5FD__core_get_eoa(const H5FD_t *_file, H5FD_mem_t type);
+static herr_t H5FD__core_set_eoa(H5FD_t *_file, H5FD_mem_t type, haddr_t addr);
+static haddr_t H5FD__core_get_eof(const H5FD_t *_file, H5FD_mem_t type);
+static herr_t  H5FD__core_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle);
+static herr_t H5FD__core_read(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr,
             size_t size, void *buf);
-static herr_t H5FD_core_write(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr,
+static herr_t H5FD__core_write(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr,
             size_t size, const void *buf);
-static herr_t H5FD_core_flush(H5FD_t *_file, hid_t dxpl_id, unsigned closing);
-static herr_t H5FD_core_truncate(H5FD_t *_file, hid_t dxpl_id, hbool_t closing);
+static herr_t H5FD__core_flush(H5FD_t *_file, hid_t dxpl_id, unsigned closing);
+static herr_t H5FD__core_truncate(H5FD_t *_file, hid_t dxpl_id, hbool_t closing);
 
 static const H5FD_class_t H5FD_core_g = {
     "core",                     /* name                 */
     MAXADDR,                    /* maxaddr              */
     H5F_CLOSE_WEAK,             /* fc_degree            */
-    H5FD_core_term,             /* terminate            */
+    H5FD__core_term,            /* terminate            */
     NULL,                       /* sb_size              */
     NULL,                       /* sb_encode            */
     NULL,                       /* sb_decode            */
     sizeof(H5FD_core_fapl_t),   /* fapl_size            */
-    H5FD_core_fapl_get,         /* fapl_get             */
+    H5FD__core_fapl_get,        /* fapl_get             */
     NULL,                       /* fapl_copy            */
     NULL,                       /* fapl_free            */
     0,                          /* dxpl_size            */
     NULL,                       /* dxpl_copy            */
     NULL,                       /* dxpl_free            */
-    H5FD_core_open,             /* open                 */
-    H5FD_core_close,            /* close                */
-    H5FD_core_cmp,              /* cmp                  */
-    H5FD_core_query,            /* query                */
+    H5FD__core_open,            /* open                 */
+    H5FD__core_close,           /* close                */
+    H5FD__core_cmp,             /* cmp                  */
+    H5FD__core_query,           /* query                */
     NULL,                       /* get_type_map         */
     NULL,                       /* alloc                */
     NULL,                       /* free                 */
-    H5FD_core_get_eoa,          /* get_eoa              */
-    H5FD_core_set_eoa,          /* set_eoa              */
-    H5FD_core_get_eof,          /* get_eof              */
-    H5FD_core_get_handle,       /* get_handle           */
-    H5FD_core_read,             /* read                 */
-    H5FD_core_write,            /* write                */
-    H5FD_core_flush,            /* flush                */
-    H5FD_core_truncate,         /* truncate             */
+    H5FD__core_get_eoa,         /* get_eoa              */
+    H5FD__core_set_eoa,         /* set_eoa              */
+    H5FD__core_get_eof,         /* get_eof              */
+    H5FD__core_get_handle,      /* get_handle           */
+    H5FD__core_read,            /* read                 */
+    H5FD__core_write,           /* write                */
+    H5FD__core_flush,           /* flush                */
+    H5FD__core_truncate,        /* truncate             */
     NULL,                       /* lock                 */
     NULL,                       /* unlock               */
     H5FD_FLMAP_DICHOTOMY        /* fl_map               */
@@ -183,7 +182,7 @@ H5FL_DEFINE(H5FD_core_region_t);
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_add_dirty_region
+ * Function:    H5FD__core_add_dirty_region
  *
  * Purpose:     Add a new dirty region to the list for later flushing
  *              to the backing store.
@@ -193,7 +192,7 @@ H5FL_DEFINE(H5FD_core_region_t);
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_add_dirty_region(H5FD_core_t *file, haddr_t start, haddr_t end)
+H5FD__core_add_dirty_region(H5FD_core_t *file, haddr_t start, haddr_t end)
 {
     H5FD_core_region_t *b_item  = NULL;
     H5FD_core_region_t *a_item  = NULL;
@@ -206,7 +205,7 @@ H5FD_core_add_dirty_region(H5FD_core_t *file, haddr_t start, haddr_t end)
     hbool_t     was_adjusted    = FALSE;
 #endif
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     HDassert(file);
     HDassert(file->dirty_list);
@@ -310,11 +309,11 @@ if(was_adjusted)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_core_add_dirty_region() */
+} /* end H5FD__core_add_dirty_region() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_destroy_dirty_list
+ * Function:    H5FD__core_destroy_dirty_list
  *
  * Purpose:     Completely destroy the dirty list.
  *
@@ -323,11 +322,11 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_destroy_dirty_list(H5FD_core_t *file)
+H5FD__core_destroy_dirty_list(H5FD_core_t *file)
 {
     herr_t ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     HDassert(file);
 
@@ -352,11 +351,11 @@ if(count != 0)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_core_destroy_dirty_list() */
+} /* end H5FD__core_destroy_dirty_list() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_write_to_bstore
+ * Function:    H5FD__core_write_to_bstore
  *
  * Purpose:     Write data to the backing store.
  *
@@ -364,7 +363,8 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t H5FD_core_write_to_bstore(H5FD_core_t *file, haddr_t addr, size_t size)
+static herr_t
+H5FD__core_write_to_bstore(H5FD_core_t *file, haddr_t addr, size_t size)
 {
     unsigned char  *ptr         = file->mem + addr;     /* mutable pointer into the
                                                          * buffer (can't change mem)
@@ -420,12 +420,11 @@ fprintf(stderr, "bytes wrote: %lu\n", bytes_wrote);
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-
-} /* end H5FD_core_write_to_bstore() */
+} /* end H5FD__core_write_to_bstore() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_init_interface
+ * Function:    H5FD__init_package
  *
  * Purpose:     Initializes any interface-specific data or routines.
  *
@@ -434,7 +433,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_init_interface(void)
+H5FD__init_package(void)
 {
     herr_t ret_value = SUCCEED;
 
@@ -445,7 +444,7 @@ H5FD_core_init_interface(void)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* H5FD_core_init_interface() */
+} /* H5FD__init_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -465,23 +464,23 @@ done:
 hid_t
 H5FD_core_init(void)
 {
-    hid_t ret_value = H5FD_CORE_g;  /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;  /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
     if(H5I_VFL != H5I_get_type(H5FD_CORE_g))
-        H5FD_CORE_g = H5FD_register(&H5FD_core_g,sizeof(H5FD_class_t),FALSE);
+        H5FD_CORE_g = H5FD_register(&H5FD_core_g, sizeof(H5FD_class_t), FALSE);
 
     /* Set return value */
     ret_value = H5FD_CORE_g;
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}
+} /* end H5FD_core_init() */
 
 
 /*---------------------------------------------------------------------------
- * Function:    H5FD_core_term
+ * Function:    H5FD__core_term
  *
  * Purpose:     Shut down the VFD
  *
@@ -493,15 +492,15 @@ done:
  *---------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_term(void)
+H5FD__core_term(void)
 {
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Reset VFL ID */
     H5FD_CORE_g = 0;
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5FD_core_term() */
+} /* end H5FD__core_term() */
 
 
 /*-------------------------------------------------------------------------
@@ -535,11 +534,11 @@ H5Pset_fapl_core(hid_t fapl_id, size_t increment, hbool_t backing_store)
     fa.increment = increment;
     fa.backing_store = backing_store;
 
-    ret_value= H5P_set_driver(plist, H5FD_CORE, &fa);
+    ret_value = H5P_set_driver(plist, H5FD_CORE, &fa);
 
 done:
     FUNC_LEAVE_API(ret_value)
-}
+} /* end H5Pset_fapl_core() */
 
 
 /*-------------------------------------------------------------------------
@@ -557,8 +556,8 @@ done:
 herr_t
 H5Pget_fapl_core(hid_t fapl_id, size_t *increment /*out*/, hbool_t *backing_store /*out*/)
 {
-    H5FD_core_fapl_t    *fa;
     H5P_genplist_t      *plist;                 /* Property list pointer */
+    const H5FD_core_fapl_t    *fa;
     herr_t              ret_value = SUCCEED;    /* Return value */
 
     FUNC_ENTER_API(FAIL)
@@ -566,28 +565,27 @@ H5Pget_fapl_core(hid_t fapl_id, size_t *increment /*out*/, hbool_t *backing_stor
 
     if(NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list")
-    if(H5FD_CORE != H5P_get_driver(plist))
+    if(H5FD_CORE != H5P_peek_driver(plist))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "incorrect VFL driver")
-    if(NULL == (fa = (H5FD_core_fapl_t *)H5P_get_driver_info(plist)))
+    if(NULL == (fa = (const H5FD_core_fapl_t *)H5P_peek_driver_info(plist)))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "bad VFL driver info")
 
-    if (increment)
+    if(increment)
         *increment = fa->increment;
-    if (backing_store)
+    if(backing_store)
         *backing_store = fa->backing_store;
 
 done:
     FUNC_LEAVE_API(ret_value)
-}
+} /* end H5Pget_fapl_core() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_fapl_get
+ * Function:    H5FD__core_fapl_get
  *
  * Purpose:     Returns a copy of the file access properties.
  *
  * Return:      Success:    Ptr to new file access properties.
- *
  *              Failure:    NULL
  *
  * Programmer:  Robb Matzke
@@ -596,13 +594,13 @@ done:
  *-------------------------------------------------------------------------
  */
 static void *
-H5FD_core_fapl_get(H5FD_t *_file)
+H5FD__core_fapl_get(H5FD_t *_file)
 {
     H5FD_core_t         *file = (H5FD_core_t*)_file;
     H5FD_core_fapl_t    *fa;
-    void                *ret_value;     /* Return value */
+    void                *ret_value = NULL;      /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     if(NULL == (fa = (H5FD_core_fapl_t *)H5MM_calloc(sizeof(H5FD_core_fapl_t))))
         HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed")
@@ -615,18 +613,17 @@ H5FD_core_fapl_get(H5FD_t *_file)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}
+} /* end H5FD__core_fapl_get() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_open
+ * Function:    H5FD___core_open
  *
  * Purpose:     Create memory as an HDF5 file.
  *
  * Return:      Success:    A pointer to a new file data structure. The
  *                          public fields will be initialized by the
  *                          caller, which is always H5FD_open().
- *
  *              Failure:    NULL
  *
  * Programmer:  Robb Matzke
@@ -635,7 +632,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static H5FD_t *
-H5FD_core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
+H5FD__core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
 {
     int                 o_flags;
     H5FD_core_t         *file = NULL;
@@ -647,9 +644,9 @@ H5FD_core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
     h5_stat_t           sb;
     int                 fd = -1;
     H5FD_file_image_info_t  file_image_info;
-    H5FD_t              *ret_value;
+    H5FD_t              *ret_value = NULL;      /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Check arguments */
     if(!name || !*name)
@@ -661,7 +658,7 @@ H5FD_core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
     HDassert(H5P_DEFAULT != fapl_id);
     if(NULL == (plist = (H5P_genplist_t *)H5I_object(fapl_id)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list")
-    if(NULL == (fa = (H5FD_core_fapl_t *)H5P_get_driver_info(plist)))
+    if(NULL == (fa = (H5FD_core_fapl_t *)H5P_peek_driver_info(plist)))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, NULL, "bad VFL driver info")
 
     /* Build the open flags */
@@ -671,7 +668,7 @@ H5FD_core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
     if(H5F_ACC_EXCL & flags) o_flags |= O_EXCL;
 
     /* Retrieve initial file image info */
-    if(H5P_get(plist, H5F_ACS_FILE_IMAGE_INFO_NAME, &file_image_info) < 0)
+    if(H5P_peek(plist, H5F_ACS_FILE_IMAGE_INFO_NAME, &file_image_info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get initial file image info")
 
     /* If the file image exists and this is an open, make sure the file doesn't exist */
@@ -864,11 +861,11 @@ done:
     } /* end if */
 
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_core_open() */
+} /* end H5FD__core_open() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_close
+ * Function:    H5FD__core_close
  *
  * Purpose:     Closes the file.
  *
@@ -880,20 +877,20 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_close(H5FD_t *_file)
+H5FD__core_close(H5FD_t *_file)
 {
     H5FD_core_t     *file = (H5FD_core_t*)_file;
     herr_t          ret_value = SUCCEED;            /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Flush any changed buffers */
-    if(H5FD_core_flush(_file, (hid_t)-1, TRUE) < 0)
+    if(H5FD__core_flush(_file, (hid_t)-1, TRUE) < 0)
         HGOTO_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "unable to flush core vfd backing store")
 
     /* Destroy the dirty region list */
     if(file->dirty_list)
-        if(H5FD_core_destroy_dirty_list(file) != SUCCEED)
+        if(H5FD__core_destroy_dirty_list(file) != SUCCEED)
             HGOTO_ERROR(H5E_VFL, H5E_CANTFREE, FAIL, "unable to free core vfd dirty region list")
 
     /* Release resources */
@@ -915,11 +912,11 @@ H5FD_core_close(H5FD_t *_file)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_core_close() */
+} /* end H5FD__core_close() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_cmp
+ * Function:    H5FD__core_cmp
  *
  * Purpose:     Compares two files belonging to this driver by name. If one
  *              file doesn't have a name then it is less than the other file.
@@ -927,7 +924,6 @@ done:
  *              address.
  *
  * Return:      Success:    A value like strcmp()
- *
  *              Failure:    never fails (arguments were checked by the
  *                          caller).
  *
@@ -937,13 +933,13 @@ done:
  *-------------------------------------------------------------------------
  */
 static int
-H5FD_core_cmp(const H5FD_t *_f1, const H5FD_t *_f2)
+H5FD__core_cmp(const H5FD_t *_f1, const H5FD_t *_f2)
 {
     const H5FD_core_t   *f1 = (const H5FD_core_t*)_f1;
     const H5FD_core_t   *f2 = (const H5FD_core_t*)_f2;
     int                 ret_value = 0;
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     if(f1->fd >= 0 && f2->fd >= 0) {
         /* Compare low level file information for backing store */
@@ -994,11 +990,11 @@ H5FD_core_cmp(const H5FD_t *_f1, const H5FD_t *_f2)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_core_cmp() */
+} /* end H5FD__core_cmp() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_query
+ * Function:    H5FD__core_query
  *
  * Purpose:     Set the flags that this VFL driver is capable of supporting.
  *              (listed in H5FDpublic.h)
@@ -1011,11 +1007,11 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_query(const H5FD_t * _file, unsigned long *flags /* out */)
+H5FD__core_query(const H5FD_t * _file, unsigned long *flags /* out */)
 {
     const H5FD_core_t   *file = (const H5FD_core_t*)_file;
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Set the VFL feature flags that this driver supports */
     if(flags) {
@@ -1033,11 +1029,11 @@ H5FD_core_query(const H5FD_t * _file, unsigned long *flags /* out */)
     } /* end if */
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5FD_core_query() */
+} /* end H5FD__core_query() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_get_eoa
+ * Function:    H5FD__core_get_eoa
  *
  * Purpose:     Gets the end-of-address marker for the file. The EOA marker
  *              is the first address past the last byte allocated in the
@@ -1051,18 +1047,18 @@ H5FD_core_query(const H5FD_t * _file, unsigned long *flags /* out */)
  *-------------------------------------------------------------------------
  */
 static haddr_t
-H5FD_core_get_eoa(const H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type)
+H5FD__core_get_eoa(const H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type)
 {
     const H5FD_core_t   *file = (const H5FD_core_t*)_file;
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     FUNC_LEAVE_NOAPI(file->eoa)
-}
+} /* end H5FD__core_get_eoa() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_set_eoa
+ * Function:    H5FD__core_set_eoa
  *
  * Purpose:     Set the end-of-address marker for the file. This function is
  *              called shortly after an existing HDF5 file is opened in order
@@ -1076,12 +1072,12 @@ H5FD_core_get_eoa(const H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type)
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_set_eoa(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, haddr_t addr)
+H5FD__core_set_eoa(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, haddr_t addr)
 {
     H5FD_core_t *file = (H5FD_core_t*)_file;
     herr_t      ret_value = SUCCEED;            /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     if(ADDR_OVERFLOW(addr))
         HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "address overflow")
@@ -1090,11 +1086,11 @@ H5FD_core_set_eoa(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, haddr_t addr)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_core_set_eoa() */
+} /* end H5FD__core_set_eoa() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_get_eof
+ * Function:    H5FD__core_get_eof
  *
  * Purpose:     Returns the end-of-file marker, which is the greater of
  *              either the size of the underlying memory or the HDF5
@@ -1110,18 +1106,18 @@ done:
  *-------------------------------------------------------------------------
  */
 static haddr_t
-H5FD_core_get_eof(const H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type)
+H5FD__core_get_eof(const H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type)
 {
     const H5FD_core_t   *file = (const H5FD_core_t*)_file;
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     FUNC_LEAVE_NOAPI(file->eof)
-}
+} /* end H5FD__core_get_eof() */
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5FD_core_get_handle
+ * Function:       H5FD__core_get_handle
  *
  * Purpose:        Gets the file handle of CORE file driver.
  *
@@ -1133,12 +1129,12 @@ H5FD_core_get_eof(const H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type)
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle)
+H5FD__core_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle)
 {
     H5FD_core_t *file = (H5FD_core_t *)_file;   /* core VFD info */
     herr_t ret_value = SUCCEED;                 /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Check args */
     if(!file_handle)
@@ -1177,11 +1173,11 @@ H5FD_core_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_core_get_handle() */
+} /* end H5FD__core_get_handle() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_read
+ * Function:    H5FD__core_read
  *
  * Purpose:     Reads SIZE bytes of data from FILE beginning at address ADDR
  *              into buffer BUF according to data transfer properties in
@@ -1189,7 +1185,6 @@ done:
  *
  * Return:      Success:    SUCCEED. Result is stored in caller-supplied
  *                          buffer BUF.
- *
  *              Failure:    FAIL, Contents of buffer BUF are undefined.
  *
  * Programmer:  Robb Matzke
@@ -1198,13 +1193,13 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_read(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNUSED dxpl_id, haddr_t addr,
+H5FD__core_read(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNUSED dxpl_id, haddr_t addr,
         size_t size, void *buf/*out*/)
 {
     H5FD_core_t	*file = (H5FD_core_t*)_file;
-    herr_t      ret_value=SUCCEED;       /* Return value */
+    herr_t ret_value = SUCCEED;       /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     HDassert(file && file->pub.cls);
     HDassert(buf);
@@ -1240,11 +1235,11 @@ H5FD_core_read(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNUS
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}
+} /* end H5FD__core_read() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_write
+ * Function:    H5FD__core_write
  *
  * Purpose:     Writes SIZE bytes of data to FILE beginning at address ADDR
  *              from buffer BUF according to data transfer properties in
@@ -1258,13 +1253,13 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_write(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNUSED dxpl_id, haddr_t addr,
+H5FD__core_write(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNUSED dxpl_id, haddr_t addr,
         size_t size, const void *buf)
 {
     H5FD_core_t *file = (H5FD_core_t*)_file;
     herr_t      ret_value = SUCCEED;            /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     HDassert(file && file->pub.cls);
     HDassert(buf);
@@ -1310,7 +1305,8 @@ H5FD_core_write(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNU
     if(file->dirty_list) {
         haddr_t start = addr;
         haddr_t end = addr + (haddr_t)size - 1;
-        if(H5FD_core_add_dirty_region(file, start, end) != SUCCEED)
+
+        if(H5FD__core_add_dirty_region(file, start, end) != SUCCEED)
             HGOTO_ERROR(H5E_VFL, H5E_CANTINSERT, FAIL, "unable to add core VFD dirty region during write call - addresses: start=%llu end=%llu", start, end)
     }
 
@@ -1322,11 +1318,11 @@ H5FD_core_write(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNU
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_core_write() */
+} /* end H5FD__core_write() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_flush
+ * Function:    H5FD__core_flush
  *
  * Purpose:     Flushes the file to backing store if there is any and if the
  *              dirty flag is set.
@@ -1339,12 +1335,12 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_flush(H5FD_t *_file, hid_t H5_ATTR_UNUSED dxpl_id, unsigned H5_ATTR_UNUSED closing)
+H5FD__core_flush(H5FD_t *_file, hid_t H5_ATTR_UNUSED dxpl_id, unsigned H5_ATTR_UNUSED closing)
 {
     H5FD_core_t *file = (H5FD_core_t*)_file;
     herr_t      ret_value = SUCCEED;            /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Write to backing store */
     if (file->dirty && file->fd >= 0 && file->backing_store) {
@@ -1371,7 +1367,7 @@ H5FD_core_flush(H5FD_t *_file, hid_t H5_ATTR_UNUSED dxpl_id, unsigned H5_ATTR_UN
 #ifdef DER
 fprintf(stderr, "(%llu, %llu : %lu)\n", item->start, item->end, size);
 #endif
-                    if(H5FD_core_write_to_bstore(file, item->start, size) != SUCCEED)
+                    if(H5FD__core_write_to_bstore(file, item->start, size) != SUCCEED)
                         HGOTO_ERROR(H5E_VFL, H5E_WRITEERROR, FAIL, "unable to write to backing store")
                 } /* end if */
 
@@ -1385,24 +1381,23 @@ if(file->eoa > file->eof)
     fprintf(stderr, "*** EOA BADNESS ***\n");
 fprintf(stderr, "\n");
 #endif
-        }
+        } /* end if */
         /* Otherwise, write the entire file out at once */
         else {
-            if(H5FD_core_write_to_bstore(file, (haddr_t)0, (size_t)file->eof) != SUCCEED)
+            if(H5FD__core_write_to_bstore(file, (haddr_t)0, (size_t)file->eof) != SUCCEED)
                 HGOTO_ERROR(H5E_VFL, H5E_WRITEERROR, FAIL, "unable to write to backing store")
-
-        } /* end while */
+        } /* end else */
 
         file->dirty = FALSE;
     }
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}
+} /* end H5FD__core_flush() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_core_truncate
+ * Function:    H5FD__core_truncate
  *
  * Purpose:     Makes sure that the true file size is the same (or larger)
  *              than the end-of-address.
@@ -1437,13 +1432,13 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_core_truncate(H5FD_t *_file, hid_t H5_ATTR_UNUSED dxpl_id, hbool_t closing)
+H5FD__core_truncate(H5FD_t *_file, hid_t H5_ATTR_UNUSED dxpl_id, hbool_t closing)
 {
     H5FD_core_t *file = (H5FD_core_t*)_file;
     size_t new_eof;                             /* New size of memory buffer */
     herr_t ret_value = SUCCEED;                 /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     HDassert(file);
 
@@ -1523,5 +1518,5 @@ fprintf(stderr, "OLD: Truncated to: %llu\n", file->eoa);
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5FD_core_truncate() */
+} /* end H5FD__core_truncate() */
 
diff --git a/src/H5FDdirect.c b/src/H5FDdirect.c
index f4ee910..de64923 100644
--- a/src/H5FDdirect.c
+++ b/src/H5FDdirect.c
@@ -22,12 +22,8 @@
  *    buffer.  The main system support this feature is Linux.
  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC  H5FD_direct_init_interface
+#include "H5FDdrvr_module.h" /* This source code file is part of the H5FD driver module */
 
-/* For system function posix_memalign - Commented it out because copper isn't able to compile
- * this file. */
-/* #define _XOPEN_SOURCE 600 */
 
 #include "H5private.h"    /* Generic Functions      */
 #include "H5Eprivate.h"    /* Error handling        */
@@ -182,10 +178,9 @@ H5FL_DEFINE_STATIC(H5FD_direct_t);
 
 /*--------------------------------------------------------------------------
 NAME
-   H5FD_direct_init_interface -- Initialize interface-specific information
+   H5FD__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5FD_direct_init_interface()
-
+    herr_t H5FD__init_package()
 RETURNS
     Non-negative on success/Negative on failure
 DESCRIPTION
@@ -194,18 +189,18 @@ DESCRIPTION
 
 --------------------------------------------------------------------------*/
 static herr_t
-H5FD_direct_init_interface(void)
+H5FD__init_package(void)
 {
     herr_t ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     if(H5FD_direct_init() < 0)
         HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "unable to initialize direct VFD")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* H5FD_direct_init_interface() */
+} /* H5FD__init_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -236,7 +231,7 @@ H5FD_direct_init(void)
         H5FD_DIRECT_g = H5FD_register(&H5FD_direct_g,sizeof(H5FD_class_t),FALSE);
 
     /* Set return value */
-    ret_value=H5FD_DIRECT_g;
+    ret_value = H5FD_DIRECT_g;
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
@@ -279,8 +274,6 @@ H5FD_direct_term(void)
  * Programmer:  Raymond Lu
  *    Wednesday, 20 September 2006
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 herr_t
@@ -297,17 +290,17 @@ H5Pset_fapl_direct(hid_t fapl_id, size_t boundary, size_t block_size, size_t cbu
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list")
 
     if(boundary != 0)
-      fa.mboundary = boundary;
+        fa.mboundary = boundary;
     else
-  fa.mboundary = MBOUNDARY_DEF;
+        fa.mboundary = MBOUNDARY_DEF;
     if(block_size != 0)
-      fa.fbsize = block_size;
+        fa.fbsize = block_size;
     else
-  fa.fbsize = FBSIZE_DEF;
+        fa.fbsize = FBSIZE_DEF;
     if(cbuf_size != 0)
-      fa.cbsize = cbuf_size;
+        fa.cbsize = cbuf_size;
     else
-  fa.cbsize = CBSIZE_DEF;
+        fa.cbsize = CBSIZE_DEF;
 
     /* Set the default to be true for data alignment */
     fa.must_align = TRUE;
@@ -316,7 +309,7 @@ H5Pset_fapl_direct(hid_t fapl_id, size_t boundary, size_t block_size, size_t cbu
     if(fa.cbsize % fa.fbsize != 0)
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "copy buffer size must be a multiple of block size")
 
-    ret_value= H5P_set_driver(plist, H5FD_DIRECT, &fa);
+    ret_value = H5P_set_driver(plist, H5FD_DIRECT, &fa);
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -336,37 +329,35 @@ done:
  * Programmer:  Raymond Lu
  *              Wednesday, October 18, 2006
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 herr_t
 H5Pget_fapl_direct(hid_t fapl_id, size_t *boundary/*out*/, size_t *block_size/*out*/,
     size_t *cbuf_size/*out*/)
 {
-    H5FD_direct_fapl_t  *fa;
     H5P_genplist_t *plist;      /* Property list pointer */
-    herr_t      ret_value=SUCCEED;       /* Return value */
+    const H5FD_direct_fapl_t  *fa;
+    herr_t      ret_value = SUCCEED;       /* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE4("e", "ixxx", fapl_id, boundary, block_size, cbuf_size);
 
     if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access list")
-    if (H5FD_DIRECT!=H5P_get_driver(plist))
+    if(H5FD_DIRECT != H5P_peek_driver(plist))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "incorrect VFL driver")
-    if (NULL==(fa=H5P_get_driver_info(plist)))
+    if(NULL == (fa = H5P_peek_driver_info(plist)))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "bad VFL driver info")
-    if (boundary)
+    if(boundary)
         *boundary = fa->mboundary;
-    if (block_size)
-  *block_size = fa->fbsize;
+    if(block_size)
+        *block_size = fa->fbsize;
     if (cbuf_size)
-  *cbuf_size = fa->cbsize;
+        *cbuf_size = fa->cbsize;
 
 done:
     FUNC_LEAVE_API(ret_value)
-}
+} /* end H5Pget_fapl_direct() */
 
 
 /*-------------------------------------------------------------------------
@@ -507,7 +498,7 @@ H5FD_direct_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxadd
     /* Get the driver specific information */
     if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list")
-    if(NULL == (fa = (H5FD_direct_fapl_t *)H5P_get_driver_info(plist)))
+    if(NULL == (fa = (H5FD_direct_fapl_t *)H5P_peek_driver_info(plist)))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, NULL, "bad VFL driver info")
 
     file->fd = fd;
diff --git a/src/H5FDdrvr_module.h b/src/H5FDdrvr_module.h
new file mode 100644
index 0000000..8bb83a1
--- /dev/null
+++ b/src/H5FDdrvr_module.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5FD driver package.  Including this header means that the source file
+ *		is part of the H5FD driver package.
+ */
+#ifndef _H5FDdrvr_module_H
+#define _H5FDdrvr_module_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5_MY_PKG       H5FD
+#define H5_MY_PKG_ERR   H5E_FILE
+#define H5_MY_PKG_INIT  YES
+#define H5_PKG_SINGLE_SOURCE
+
+#endif /* _H5FDdrvr_module_H */
+
diff --git a/src/H5FDfamily.c b/src/H5FDfamily.c
index 9edbc72..7a35612 100644
--- a/src/H5FDfamily.c
+++ b/src/H5FDfamily.c
@@ -34,8 +34,7 @@
  *
  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5FD_family_init_interface
+#include "H5FDdrvr_module.h" /* This source code file is part of the H5FD driver module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -147,10 +146,9 @@ static const H5FD_class_t H5FD_family_g = {
 
 /*--------------------------------------------------------------------------
 NAME
-   H5FD_family_init_interface -- Initialize interface-specific information
+   H5FD__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5FD_family_init_interface()
-
+    herr_t H5FD__init_package()
 RETURNS
     Non-negative on success/Negative on failure
 DESCRIPTION
@@ -159,18 +157,18 @@ DESCRIPTION
 
 --------------------------------------------------------------------------*/
 static herr_t
-H5FD_family_init_interface(void)
+H5FD__init_package(void)
 {
     herr_t ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     if(H5FD_family_init() < 0)
         HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "unable to initialize family VFD")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* H5FD_family_init_interface() */
+} /* H5FD__init_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -267,7 +265,6 @@ H5Pset_fapl_family(hid_t fapl_id, hsize_t msize, hid_t memb_fapl_id)
     FUNC_ENTER_API(FAIL)
     H5TRACE3("e", "ihi", fapl_id, msize, memb_fapl_id);
 
-
     /* Check arguments */
     if(TRUE != H5P_isa_class(fapl_id, H5P_FILE_ACCESS))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list")
@@ -277,16 +274,13 @@ H5Pset_fapl_family(hid_t fapl_id, hsize_t msize, hid_t memb_fapl_id)
         if(TRUE != H5P_isa_class(memb_fapl_id, H5P_FILE_ACCESS))
             HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access list")
 
-    /*
-     * Initialize driver specific information. No need to copy it into the FA
-     * struct since all members will be copied by H5P_set_driver().
-     */
+    /* Initialize driver specific information. */
     fa.memb_size = msize;
     fa.memb_fapl_id = memb_fapl_id;
 
     if(NULL == (plist = (H5P_genplist_t *)H5I_object(fapl_id)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list")
-    ret_value= H5P_set_driver(plist, H5FD_FAMILY, &fa);
+    ret_value = H5P_set_driver(plist, H5FD_FAMILY, &fa);
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -316,21 +310,20 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5Pget_fapl_family(hid_t fapl_id, hsize_t *msize/*out*/,
-		   hid_t *memb_fapl_id/*out*/)
+H5Pget_fapl_family(hid_t fapl_id, hsize_t *msize/*out*/, hid_t *memb_fapl_id/*out*/)
 {
-    H5FD_family_fapl_t	*fa;
     H5P_genplist_t *plist;      /* Property list pointer */
-    herr_t      ret_value=SUCCEED;       /* Return value */
+    const H5FD_family_fapl_t	*fa;
+    herr_t      ret_value = SUCCEED;       /* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE3("e", "ixx", fapl_id, msize, memb_fapl_id);
 
     if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access list")
-    if(H5FD_FAMILY != H5P_get_driver(plist))
+    if(H5FD_FAMILY != H5P_peek_driver(plist))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "incorrect VFL driver")
-    if(NULL == (fa = (H5FD_family_fapl_t *)H5P_get_driver_info(plist)))
+    if(NULL == (fa = (const H5FD_family_fapl_t *)H5P_peek_driver_info(plist)))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "bad VFL driver info")
     if(msize)
         *msize = fa->memb_size;
@@ -368,7 +361,7 @@ H5FD_family_fapl_get(H5FD_t *_file)
     H5FD_family_t	*file = (H5FD_family_t*)_file;
     H5FD_family_fapl_t	*fa = NULL;
     H5P_genplist_t *plist;      /* Property list pointer */
-    void *ret_value;       /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -414,7 +407,7 @@ H5FD_family_fapl_copy(const void *_old_fa)
     const H5FD_family_fapl_t *old_fa = (const H5FD_family_fapl_t*)_old_fa;
     H5FD_family_fapl_t *new_fa = NULL;
     H5P_genplist_t *plist;      /* Property list pointer */
-    void *ret_value;       /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -595,12 +588,8 @@ H5FD_family_sb_decode(H5FD_t *_file, const char H5_ATTR_UNUSED *name, const unsi
            file->pmem_size = msize;
 
         /* Check if member size from file access property is correct */
-        if(msize != file->pmem_size) {
-            char err_msg[128];
-
-            HDsnprintf(err_msg, sizeof(err_msg), "Family member size should be %lu.  But the size from file access property is %lu", (unsigned long)msize, (unsigned long)file->pmem_size);
-            HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, FAIL, err_msg)
-        } /* end if */
+        if(msize != file->pmem_size)
+            HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, FAIL, "Family member size should be %lu.  But the size from file access property is %lu", (unsigned long)msize, (unsigned long)file->pmem_size)
 
         /* Update member file size to the size saved in the superblock.
          * That's the size intended to be. */
@@ -626,23 +615,6 @@ done:
  * Programmer:	Robb Matzke
  *              Wednesday, August  4, 1999
  *
- * Modifications:
- *              Raymond Lu
- *              Thursday, November 18, 2004
- *              When file is re-opened, member size passed in from access property
- *              is checked to see if it's reasonable.  If there is only 1 member
- *              file, member size can't be smaller than current member size.
- *              If there are at least 2 member files, member size can only be equal
- *              the 1st member size.
- *
- *              Raymond Lu
- *              Tuesday, May 24, 2005
- *              The modification described above has been changed.  The major checking
- *              is done in H5F_read_superblock.  Member file size is saved in the
- *              superblock now.  H5F_read_superblock() reads this saved size and compare
- *              to the size passed in from file access property.  Wrong size will
- *              result in a failure.
- *
  *-------------------------------------------------------------------------
  */
 static H5FD_t *
@@ -666,7 +638,7 @@ H5FD_family_open(const char *name, unsigned flags, hid_t fapl_id,
     /* Initialize file from file access properties */
     if(NULL == (file = (H5FD_family_t *)H5MM_calloc(sizeof(H5FD_family_t))))
         HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "unable to allocate file struct")
-    if(H5P_FILE_ACCESS_DEFAULT==fapl_id) {
+    if(H5P_FILE_ACCESS_DEFAULT == fapl_id) {
         file->memb_fapl_id = H5P_FILE_ACCESS_DEFAULT;
         if(H5I_inc_ref(file->memb_fapl_id, FALSE) < 0)
             HGOTO_ERROR(H5E_VFL, H5E_CANTINC, NULL, "unable to increment ref count on VFL driver")
@@ -676,11 +648,11 @@ H5FD_family_open(const char *name, unsigned flags, hid_t fapl_id,
     } /* end if */
     else {
         H5P_genplist_t      *plist;      /* Property list pointer */
-        H5FD_family_fapl_t *fa;
+        const H5FD_family_fapl_t *fa;
 
         if(NULL == (plist = (H5P_genplist_t *)H5I_object(fapl_id)))
             HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list")
-        if(NULL == (fa = (H5FD_family_fapl_t *)H5P_get_driver_info(plist)))
+        if(NULL == (fa = (const H5FD_family_fapl_t *)H5P_peek_driver_info(plist)))
             HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, NULL, "bad VFL driver info")
 
         /* Check for new family file size. It's used by h5repart only. */
@@ -693,8 +665,8 @@ H5FD_family_open(const char *name, unsigned flags, hid_t fapl_id,
             file->repart_members = TRUE;
         } /* end if */
 
-        if(fa->memb_fapl_id==H5P_FILE_ACCESS_DEFAULT) {
-            if(H5I_inc_ref(fa->memb_fapl_id, FALSE)<0)
+        if(fa->memb_fapl_id == H5P_FILE_ACCESS_DEFAULT) {
+            if(H5I_inc_ref(fa->memb_fapl_id, FALSE) < 0)
                 HGOTO_ERROR(H5E_VFL, H5E_CANTINC, NULL, "unable to increment ref count on VFL driver")
             file->memb_fapl_id = fa->memb_fapl_id;
         } /* end if */
@@ -1048,7 +1020,7 @@ H5FD_family_get_eof(const H5FD_t *_file, H5FD_mem_t type)
     const H5FD_family_t	*file = (const H5FD_family_t*)_file;
     haddr_t		eof=0;
     int			i;      /* Local index variable */
-    haddr_t ret_value;   /* Return value */
+    haddr_t ret_value = HADDR_UNDEF;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1102,7 +1074,7 @@ H5FD_family_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle)
     H5P_genplist_t      *plist;
     hsize_t             offset;
     int                 memb;
-    herr_t              ret_value;
+    herr_t              ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5FDint.c b/src/H5FDint.c
index 13bc68a..e7cb2c0 100644
--- a/src/H5FDint.c
+++ b/src/H5FDint.c
@@ -28,10 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5FD_PACKAGE		/*suppress error about including H5FDpkg  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5FD_int_init_interface
+#include "H5FDmodule.h"         /* This source code file is part of the H5FD module */
 
 
 /***********/
@@ -80,28 +77,6 @@
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5FD_int_init_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5FD_int_init_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5FD_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5FD_int_init_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5FD_init())
-} /* H5FD_int_init_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:    H5FD_locate_signature
  *
@@ -325,7 +300,7 @@ done:
 haddr_t
 H5FD_get_eoa(const H5FD_t *file, H5FD_mem_t type)
 {
-    haddr_t	ret_value;
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 
@@ -367,7 +342,7 @@ done:
 haddr_t
 H5FD_get_eof(const H5FD_t *file, H5FD_mem_t type)
 {
-    haddr_t	ret_value;
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 
diff --git a/src/H5FDlog.c b/src/H5FDlog.c
index e8695c5..eb2c0e3 100644
--- a/src/H5FDlog.c
+++ b/src/H5FDlog.c
@@ -26,8 +26,7 @@
  *              With custom modifications...
  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5FD_log_init_interface
+#include "H5FDdrvr_module.h" /* This source code file is part of the H5FD driver module */
 
 
 #include "H5private.h"      /* Generic Functions    */
@@ -221,7 +220,7 @@ H5FL_DEFINE_STATIC(H5FD_log_t);
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_log_init_interface
+ * Function:    H5FD__init_package
  *
  * Purpose:     Initializes any interface-specific data or routines.
  *
@@ -230,18 +229,18 @@ H5FL_DEFINE_STATIC(H5FD_log_t);
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_log_init_interface(void)
+H5FD__init_package(void)
 {
     herr_t ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     if(H5FD_log_init() < 0)
         HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "unable to initialize log VFD")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* H5FD_log_init_interface() */
+} /* H5FD__init_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -261,7 +260,7 @@ done:
 hid_t
 H5FD_log_init(void)
 {
-    hid_t ret_value;            /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;  /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -361,7 +360,7 @@ static void *
 H5FD_log_fapl_get(H5FD_t *_file)
 {
     H5FD_log_t  *file = (H5FD_log_t *)_file;
-    void        *ret_value;                     /* Return value */
+    void        *ret_value = NULL;              /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -390,7 +389,7 @@ H5FD_log_fapl_copy(const void *_old_fa)
 {
     const H5FD_log_fapl_t   *old_fa = (const H5FD_log_fapl_t*)_old_fa;
     H5FD_log_fapl_t         *new_fa = NULL;     /* New FAPL info */
-    void                    *ret_value;         /* Return value */
+    void                    *ret_value = NULL;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -471,7 +470,7 @@ H5FD_log_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
 {
     H5FD_log_t      *file = NULL;
     H5P_genplist_t  *plist;         /* Property list */
-    H5FD_log_fapl_t *fa;            /* File access property list information */
+    const H5FD_log_fapl_t *fa;            /* File access property list information */
     int             fd = -1;        /* File descriptor */
     int             o_flags;        /* Flags for open() call */
 #ifdef H5_HAVE_WIN32_API
@@ -483,7 +482,7 @@ H5FD_log_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
     struct timeval stat_timeval_diff;
 #endif /* H5_HAVE_GETTIMEOFDAY */
     h5_stat_t       sb;
-    H5FD_t          *ret_value;     /* Return value */
+    H5FD_t          *ret_value = NULL;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -510,7 +509,7 @@ H5FD_log_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
     /* Get the driver specific information */
     if(NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list")
-    if(NULL == (fa = (H5FD_log_fapl_t *)H5P_get_driver_info(plist)))
+    if(NULL == (fa = (const H5FD_log_fapl_t *)H5P_peek_driver_info(plist)))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, NULL, "bad VFL driver info")
 
 #ifdef H5_HAVE_GETTIMEOFDAY
@@ -922,7 +921,7 @@ H5FD_log_alloc(H5FD_t *_file, H5FD_mem_t type, hid_t H5_ATTR_UNUSED dxpl_id, hsi
 {
     H5FD_log_t	*file = (H5FD_log_t *)_file;
     haddr_t addr;
-    haddr_t ret_value;          /* Return value */
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5FDmodule.h b/src/H5FDmodule.h
new file mode 100644
index 0000000..6358e86
--- /dev/null
+++ b/src/H5FDmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5FD package.  Including this header means that the source file
+ *		is part of the H5FD package.
+ */
+#ifndef _H5FDmodule_H
+#define _H5FDmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5FD_MODULE
+#define H5_MY_PKG       H5FD
+#define H5_MY_PKG_ERR   H5E_VFL
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5FDmodule_H */
+
diff --git a/src/H5FDmpi.c b/src/H5FDmpi.c
index 86a5d39..fdc4eca 100644
--- a/src/H5FDmpi.c
+++ b/src/H5FDmpi.c
@@ -452,24 +452,13 @@ done:
  * Programmer:	Robb Matzke
  *              Monday, August  9, 1999
  *
- * Modifications:
- *
- *              Quincey Koziol - 2002/06/17
- *              Removed 'disp' parameter, read & write routines will use
- *              the address of the dataset in MPI_File_set_view() calls, as
- *              necessary.
- *
- *              Quincey Koziol - 2002/06/17
- *              Changed to set temporary properties in a dxpl, instead of
- *              flags in the file struct, which will make this more threadsafe.
- *
  *-------------------------------------------------------------------------
  */
 herr_t
 H5FD_mpi_setup_collective(hid_t dxpl_id, MPI_Datatype *btype, MPI_Datatype *ftype)
 {
     H5P_genplist_t *plist;      /* Property list pointer */
-    herr_t      ret_value=SUCCEED;       /* Return value */
+    herr_t ret_value = SUCCEED; /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5FDmpio.c b/src/H5FDmpio.c
index 5f36d2a..b3ef1f2 100644
--- a/src/H5FDmpio.c
+++ b/src/H5FDmpio.c
@@ -21,8 +21,7 @@
  *
  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5FD_mpio_init_interface
+#include "H5FDdrvr_module.h" /* This source code file is part of the H5FD driver module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -167,10 +166,9 @@ static int H5FD_mpio_Debug[256] =
 
 /*--------------------------------------------------------------------------
 NAME
-   H5FD_mpio_init_interface -- Initialize interface-specific information
+   H5FD__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5FD_mpio_init_interface()
-
+    herr_t H5FD__init_package()
 RETURNS
     Non-negative on success/Negative on failure
 DESCRIPTION
@@ -179,18 +177,18 @@ DESCRIPTION
 
 --------------------------------------------------------------------------*/
 static herr_t
-H5FD_mpio_init_interface(void)
+H5FD__init_package(void)
 {
     herr_t ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     if(H5FD_mpio_init() < 0)
         HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "unable to initialize mpio VFD")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* H5FD_mpio_init_interface() */
+} /* H5FD__init_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -304,33 +302,6 @@ H5FD_mpio_term(void)
  * Programmer:	Albert Cheng
  *		Feb 3, 1998
  *
- * Modifications:
- *		Robb Matzke, 1998-02-18
- *		Check all arguments before the property list is updated so we
- *		don't leave the property list in a bad state if something
- *		goes wrong.  Also, the property list data type changed to
- *		allow more generality so all the mpi-related stuff is in the
- *		`u.mpi' member.  The `access_mode' will contain only
- * 		mpi-related flags defined in H5Fpublic.h.
- *
- *		Albert Cheng, 1998-04-16
- *		Removed the ACCESS_MODE argument.  The access mode is changed
- *		to be controlled by data transfer property list during data
- *		read/write calls.
- *
- * 		Robb Matzke, 1999-08-06
- *		Modified to work with the virtual file layer.
- *
- *		Raymond Lu, 2001-10-23
- *		Changed the file access list to the new generic property
- *		list.
- *
- *		Albert Cheng, 2003-04-17
- *		Modified the description of the function that it now stores
- *		a duplicate of the communicator and INFO object.  Free the
- *		old duplicates if previously set.  (Work is actually done
- *		by H5P_set_driver.)
- *
  *-------------------------------------------------------------------------
  */
 herr_t
@@ -357,11 +328,11 @@ H5Pset_fapl_mpio(hid_t fapl_id, MPI_Comm comm, MPI_Info info)
     fa.info = info;
 
     /* duplication is done during driver setting. */
-    ret_value= H5P_set_driver(plist, H5FD_MPIO, &fa);
+    ret_value = H5P_set_driver(plist, H5FD_MPIO, &fa);
 
 done:
     FUNC_LEAVE_API(ret_value)
-}
+} /* H5Pset_fapl_mpio() */
 
 
 /*-------------------------------------------------------------------------
@@ -386,71 +357,60 @@ done:
  * Programmer:	Robb Matzke
  *		Thursday, February 26, 1998
  *
- * Modifications:
- *
- *	        Albert Cheng, Apr 16, 1998
- *	        Removed the access_mode argument.  The access_mode is changed
- *	        to be controlled by data transfer property list during data
- *	        read/write calls.
- *
- *		Raymond Lu, 2001-10-23
- *		Changed the file access list to the new generic property
- *		list.
- *
- *		Albert Cheng, 2003-04-17
- *		Return duplicates of the stored communicator and Info object.
- *
  *-------------------------------------------------------------------------
  */
 herr_t
 H5Pget_fapl_mpio(hid_t fapl_id, MPI_Comm *comm/*out*/, MPI_Info *info/*out*/)
 {
-    H5FD_mpio_fapl_t	*fa;
     H5P_genplist_t *plist;      /* Property list pointer */
-    MPI_Comm	comm_tmp=MPI_COMM_NULL;
-    int		mpi_code;		/* mpi return code */
-    herr_t      ret_value=SUCCEED;      /* Return value */
+    const H5FD_mpio_fapl_t *fa;       /* MPIO fapl info */
+    MPI_Comm	comm_tmp = MPI_COMM_NULL;
+    hbool_t     comm_copied = FALSE;    /* MPI Comm has been duplicated */
+    int		mpi_code;		/* MPI return code */
+    herr_t      ret_value = SUCCEED;    /* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE3("e", "ixx", fapl_id, comm, info);
 
     if(NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS)))
         HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a file access list")
-    if(H5FD_MPIO != H5P_get_driver(plist))
+    if(H5FD_MPIO != H5P_peek_driver(plist))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "incorrect VFL driver")
-    if(NULL == (fa = (H5FD_mpio_fapl_t *)H5P_get_driver_info(plist)))
+    if(NULL == (fa = (const H5FD_mpio_fapl_t *)H5P_peek_driver_info(plist)))
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "bad VFL driver info")
 
     /* Store the duplicated communicator in a temporary variable for error */
-    /* recovery in case the INFO duplication fails.  We cannot attempt to */
-    /* the value into *comm yet since if MPI_Comm_dup fails, we will end  */
-    /* up freeing whatever *comm holds and that could be invalid. */
-    if (comm){
-	if (MPI_SUCCESS != (mpi_code=MPI_Comm_dup(fa->comm, &comm_tmp)))
+    /* recovery in case the INFO duplication fails. */
+    if(comm) {
+	if(MPI_SUCCESS != (mpi_code = MPI_Comm_dup(fa->comm, &comm_tmp)))
 	    HMPI_GOTO_ERROR(FAIL, "MPI_Comm_dup failed", mpi_code)
-    }
+        comm_copied = TRUE;
+    } /* end if */
 
-    if (info){
-	if (MPI_INFO_NULL != fa->info){
-	    if (MPI_SUCCESS != (mpi_code=MPI_Info_dup(fa->info, info)))
+    if(info) {
+	if(MPI_INFO_NULL != fa->info) {
+	    if(MPI_SUCCESS != (mpi_code = MPI_Info_dup(fa->info, info)))
 		HMPI_GOTO_ERROR(FAIL, "MPI_Info_dup failed", mpi_code)
-	}else{
+	} /* end if */
+        else
 	    /* do not dup it */
 	    *info = MPI_INFO_NULL;
-	}
-    }
+    } /* end if */
 
-    if (comm)
+    /* Store the copied communicator, now that the Info object has been
+     *  successfully copied.
+     */
+    if(comm)
         *comm = comm_tmp;
 
 done:
-    if (FAIL==ret_value){
+    if(ret_value < 0)
 	/* need to free anything created here */
-	if (comm_tmp != MPI_COMM_NULL)
+	if(comm_copied)
 	    MPI_Comm_free(&comm_tmp);
-    }
+
     FUNC_LEAVE_API(ret_value)
-}
+} /* end H5Pget_fapl_mpio() */
 
 
 /*-------------------------------------------------------------------------
@@ -965,32 +925,6 @@ done:
  * Programmer:
  *              January 30, 1998
  *
- * Modifications:
- * 		Robb Matzke, 1998-02-18
- *		Added the ACCESS_PARMS argument.  Moved some error checking
- *		here from elsewhere.
- *
- *      	rky, 1998-01-11
- *      	Added H5FD_mpio_Debug debug flags controlled by MPI_Info.
- *
- *      	rky, 1998-08-28
- *		Init flag controlling redundant metadata writes to disk.
- *
- *      	rky, 1998-12-07
- *		Added barrier after MPI_File_set_size to prevent race
- *		condition -- subsequent writes were being truncated, causing
- *		holes in file.
- *
- * 		Robb Matzke, 1999-08-06
- *		Modified to work with the virtual file layer.
- *
- *      	rky & ppw, 1999-11-07
- *		Modified "H5FD_mpio_open" so that file-truncation is
- *              avoided for brand-new files (with zero filesize).
- *
- * 		Albert Cheng, 2003-04-17
- * 		Duplicate the communicator and Info object so that file is
- * 		insulated from the old one.
  *-------------------------------------------------------------------------
  */
 static H5FD_t *
@@ -1005,11 +939,11 @@ H5FD_mpio_open(const char *name, unsigned flags, hid_t fapl_id,
     int				mpi_size;       /* Total number of MPI processes */
     int				mpi_code;	/* mpi return code */
     MPI_Offset			size;
-    const H5FD_mpio_fapl_t	*fa=NULL;
+    const H5FD_mpio_fapl_t	*fa = NULL;
     H5FD_mpio_fapl_t		_fa;
     H5P_genplist_t *plist;      /* Property list pointer */
-    MPI_Comm                    comm_dup=MPI_COMM_NULL;
-    MPI_Info                    info_dup=MPI_INFO_NULL;
+    MPI_Comm                    comm_dup = MPI_COMM_NULL;
+    MPI_Info                    info_dup = MPI_INFO_NULL;
     H5FD_t			*ret_value;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
@@ -1024,39 +958,42 @@ H5FD_mpio_open(const char *name, unsigned flags, hid_t fapl_id,
     /* Obtain a pointer to mpio-specific file access properties */
     if(NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list")
-    if(H5P_FILE_ACCESS_DEFAULT == fapl_id || H5FD_MPIO != H5P_get_driver(plist)) {
+    if(H5P_FILE_ACCESS_DEFAULT == fapl_id || H5FD_MPIO != H5P_peek_driver(plist)) {
 	_fa.comm = MPI_COMM_SELF; /*default*/
 	_fa.info = MPI_INFO_NULL; /*default*/
 	fa = &_fa;
-    } else {
-        if(NULL == (fa = (const H5FD_mpio_fapl_t *)H5P_get_driver_info(plist)))
+    } /* end if */
+    else {
+        if(NULL == (fa = (const H5FD_mpio_fapl_t *)H5P_peek_driver_info(plist)))
 	    HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, NULL, "bad VFL driver info")
-    }
+    } /* end else */
 
     /* Duplicate communicator and Info object for use by this file. */
-    if (FAIL==H5FD_mpi_comm_info_dup(fa->comm, fa->info, &comm_dup, &info_dup))
+    if(FAIL == H5FD_mpi_comm_info_dup(fa->comm, fa->info, &comm_dup, &info_dup))
 	HGOTO_ERROR(H5E_INTERNAL, H5E_CANTCOPY, NULL, "Communicator/Info duplicate failed")
 
     /* convert HDF5 flags to MPI-IO flags */
     /* some combinations are illegal; let MPI-IO figure it out */
-    mpi_amode  = (flags&H5F_ACC_RDWR) ? MPI_MODE_RDWR : MPI_MODE_RDONLY;
-    if (flags&H5F_ACC_CREAT)	mpi_amode |= MPI_MODE_CREATE;
-    if (flags&H5F_ACC_EXCL)	mpi_amode |= MPI_MODE_EXCL;
+    mpi_amode  = (flags & H5F_ACC_RDWR) ? MPI_MODE_RDWR : MPI_MODE_RDONLY;
+    if(flags & H5F_ACC_CREAT)
+        mpi_amode |= MPI_MODE_CREATE;
+    if(flags & H5F_ACC_EXCL)
+        mpi_amode |= MPI_MODE_EXCL;
 
 #ifdef H5FDmpio_DEBUG
     /* Check for debug commands in the info parameter */
     {
-	char debug_str[128];
-        int flag, i;
-        if (MPI_INFO_NULL != info_dup) {
-            MPI_Info_get(fa->info, H5F_MPIO_DEBUG_KEY, sizeof(debug_str)-1, debug_str, &flag);
-            if (flag) {
-                fprintf(stdout, "H5FD_mpio debug flags=%s\n", debug_str );
-                for (i=0;
-                     debug_str[i]/*end of string*/ && i<128/*just in case*/;
-                     ++i) {
+        if(MPI_INFO_NULL != info_dup) {
+            char debug_str[128];
+            int flag;
+
+            MPI_Info_get(fa->info, H5F_MPIO_DEBUG_KEY, sizeof(debug_str) - 1, debug_str, &flag);
+            if(flag) {
+                int i;
+
+                fprintf(stdout, "H5FD_mpio debug flags = '%s'\n", debug_str);
+                for(i = 0; debug_str[i]/*end of string*/ && i < 128/*just in case*/; ++i)
                     H5FD_mpio_Debug[(int)debug_str[i]] = 1;
-                }
             }
         }
     }
@@ -1523,21 +1460,21 @@ H5FD_mpio_read(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t dxpl_id, had
             use_view_this_time = TRUE;
 
             /* prepare for a full-blown xfer using btype, ftype, and disp */
-            if(H5P_get(plist, H5FD_MPI_XFER_MEM_MPI_TYPE_NAME, &buf_type)<0)
+            if(H5P_get(plist, H5FD_MPI_XFER_MEM_MPI_TYPE_NAME, &buf_type) < 0)
                 HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property")
-            if(H5P_get(plist, H5FD_MPI_XFER_FILE_MPI_TYPE_NAME, &file_type)<0)
+            if(H5P_get(plist, H5FD_MPI_XFER_FILE_MPI_TYPE_NAME, &file_type) < 0)
                 HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property")
 
             /*
              * Set the file view when we are using MPI derived types
              */
-            if (MPI_SUCCESS != (mpi_code=MPI_File_set_view(file->f, mpi_off, MPI_BYTE, file_type, H5FD_mpi_native_g,  file->info)))
+            if(MPI_SUCCESS != (mpi_code = MPI_File_set_view(file->f, mpi_off, MPI_BYTE, file_type, H5FD_mpi_native_g, file->info)))
                 HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mpi_code)
 
             /* When using types, use the address as the displacement for
              * MPI_File_set_view and reset the address for the read to zero
              */
-            mpi_off=0;
+            mpi_off = 0;
         } /* end if */
     } /* end if */
 
@@ -1553,7 +1490,7 @@ H5FD_mpio_read(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t dxpl_id, had
         HDassert(plist);
 
         /* get the transfer mode from the dxpl */
-        if(H5P_get(plist, H5D_XFER_MPIO_COLLECTIVE_OPT_NAME, &coll_opt_mode)<0)
+        if(H5P_get(plist, H5D_XFER_MPIO_COLLECTIVE_OPT_NAME, &coll_opt_mode) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O collective_op property")
 
         if(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO) {
@@ -2128,7 +2065,7 @@ H5FD_mpio_communicator(const H5FD_t *_file)
     HDassert(H5FD_MPIO==file->pub.driver_id);
 
     FUNC_LEAVE_NOAPI(file->comm)
-}
+} /* end H5FD_mpio_communicator() */
 
 #endif /* H5_HAVE_PARALLEL */
 
diff --git a/src/H5FDpkg.h b/src/H5FDpkg.h
index 7c0988e..ef33cf1 100644
--- a/src/H5FDpkg.h
+++ b/src/H5FDpkg.h
@@ -21,7 +21,7 @@
  *		the H5FD package.  Source files outside the H5FD package should
  *		include H5FDprivate.h instead.
  */
-#ifndef H5FD_PACKAGE
+#if !(defined H5FD_FRIEND || defined H5FD_MODULE)
 #error "Do not include this file outside the H5FD package!"
 #endif
 
@@ -52,7 +52,6 @@
 /******************************/
 /* Package Private Prototypes */
 /******************************/
-H5_DLL herr_t H5FD_init(void);
 H5_DLL haddr_t H5FD_alloc_real(H5FD_t *file, hid_t dxpl_id, H5FD_mem_t type,
     hsize_t size, haddr_t *align_addr, hsize_t *align_size);
 H5_DLL herr_t H5FD_free_real(H5FD_t *file, hid_t dxpl_id, H5FD_mem_t type,
diff --git a/src/H5FDprivate.h b/src/H5FDprivate.h
index 0a7fe6c..412bbef 100644
--- a/src/H5FDprivate.h
+++ b/src/H5FDprivate.h
@@ -90,6 +90,12 @@ typedef struct {
     }                                   \
 }
 
+/* Define structure to hold driver ID & info for FAPLs */
+typedef struct {
+    hid_t driver_id;            /* Driver's ID */
+    const void *driver_info;    /* Driver info, for open callbacks */
+} H5FD_driver_prop_t;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -111,8 +117,7 @@ H5_DLL hsize_t H5FD_sb_size(H5FD_t *file);
 H5_DLL herr_t H5FD_sb_encode(H5FD_t *file, char *name/*out*/, uint8_t *buf);
 H5_DLL herr_t H5FD_sb_load(H5FD_t *file, const char *name, const uint8_t *buf);
 H5_DLL void *H5FD_fapl_get(H5FD_t *file);
-H5_DLL herr_t H5FD_fapl_open(struct H5P_genplist_t *plist, hid_t driver_id, const void *driver_info);
-H5_DLL herr_t H5FD_fapl_close(hid_t driver_id, void *fapl);
+H5_DLL herr_t H5FD_fapl_close(hid_t driver_id, const void *fapl);
 H5_DLL hid_t H5FD_register(const void *cls, size_t size, hbool_t app_ref);
 H5_DLL H5FD_t *H5FD_open(const char *name, unsigned flags, hid_t fapl_id,
 		  haddr_t maxaddr);
diff --git a/src/H5FDsec2.c b/src/H5FDsec2.c
index 10e2a66..34527df 100644
--- a/src/H5FDsec2.c
+++ b/src/H5FDsec2.c
@@ -25,8 +25,7 @@
  *          application to the same file).
  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC  H5FD_sec2_init_interface
+#include "H5FDdrvr_module.h" /* This source code file is part of the H5FD driver module */
 
 
 #include "H5private.h"      /* Generic Functions        */
@@ -179,7 +178,7 @@ H5FL_DEFINE_STATIC(H5FD_sec2_t);
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5FD_sec2_init_interface
+ * Function:    H5FD__init_package
  *
  * Purpose:     Initializes any interface-specific data or routines.
  *
@@ -188,18 +187,18 @@ H5FL_DEFINE_STATIC(H5FD_sec2_t);
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FD_sec2_init_interface(void)
+H5FD__init_package(void)
 {
     herr_t ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     if(H5FD_sec2_init() < 0)
         HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "unable to initialize sec2 VFD")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* H5FD_sec2_init_interface() */
+} /* H5FD__init_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -219,7 +218,7 @@ done:
 hid_t
 H5FD_sec2_init(void)
 {
-    hid_t ret_value;            /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;          /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -316,7 +315,7 @@ H5FD_sec2_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr)
     struct _BY_HANDLE_FILE_INFORMATION fileinfo;
 #endif
     h5_stat_t       sb;
-    H5FD_t          *ret_value;             /* Return value             */
+    H5FD_t          *ret_value = NULL;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5FDspace.c b/src/H5FDspace.c
index deb2153..edc83e6 100644
--- a/src/H5FDspace.c
+++ b/src/H5FDspace.c
@@ -28,10 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5FD_PACKAGE		/*suppress error about including H5FDpkg  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5FD_space_init_interface
+#include "H5FDmodule.h"         /* This source code file is part of the H5FD module */
 
 
 /***********/
@@ -86,28 +83,6 @@ H5FL_DEFINE(H5FD_free_t);
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5FD_space_init_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5FD_space_init_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5FD_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5FD_space_init_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5FD_init())
-} /* H5FD_space_init_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:    H5FD_extend
  *
@@ -129,7 +104,7 @@ H5FD_extend(H5FD_t *file, H5FD_mem_t type, hbool_t new_block, hsize_t size, hadd
     hsize_t orig_size = size;   /* Original allocation size */
     haddr_t eoa;                /* Address of end-of-allocated space */
     hsize_t extra;        	/* Extra space to allocate, to align request */
-    haddr_t ret_value;          /* Return value */
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -197,7 +172,7 @@ done:
 haddr_t
 H5FD_alloc_real(H5FD_t *file, hid_t dxpl_id, H5FD_mem_t type, hsize_t size, haddr_t *frag_addr, hsize_t *frag_size)
 {
-    haddr_t     ret_value;              /* Return value */
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 #ifdef H5FD_ALLOC_DEBUG
@@ -253,7 +228,7 @@ haddr_t
 H5FD_alloc(H5FD_t *file, hid_t dxpl_id, H5FD_mem_t type, H5F_t *f, hsize_t size,
     haddr_t *frag_addr, hsize_t *frag_size)
 {
-    haddr_t     ret_value;              /* Return value */
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 
diff --git a/src/H5FL.c b/src/H5FL.c
index aec92ff..fb355ad 100644
--- a/src/H5FL.c
+++ b/src/H5FL.c
@@ -27,8 +27,7 @@
  *      move frequently accessed free lists to the head of the queue.
  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5FL_init_interface
+#include "H5FLmodule.h"         /* This source code file is part of the H5FL module */
 
 
 /* #define H5FL_DEBUG */
@@ -117,6 +116,9 @@ struct H5FL_fac_node_t {
     struct H5FL_fac_node_t *next;   /* Pointer to next block in free list */
 };
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* The head of the list of factory things to garbage collect */
 static H5FL_fac_gc_list_t H5FL_fac_gc_head={0,NULL};
 
@@ -130,14 +132,18 @@ static H5FL_track_t *H5FL_out_head_g = NULL;
 #endif /* H5FL_TRACK */
 
 /* Forward declarations of local static functions */
-static herr_t H5FL_reg_gc(void);
-static herr_t H5FL_reg_gc_list(H5FL_reg_head_t *head);
-static herr_t H5FL_arr_gc(void);
-static herr_t H5FL_arr_gc_list(H5FL_arr_head_t *head);
-static herr_t H5FL_blk_gc(void);
-static herr_t H5FL_blk_gc_list(H5FL_blk_head_t *head);
-static herr_t H5FL_fac_gc(void);
-static herr_t H5FL_fac_gc_list(H5FL_fac_head_t *head);
+static herr_t H5FL__reg_gc(void);
+static herr_t H5FL__reg_gc_list(H5FL_reg_head_t *head);
+static int H5FL__reg_term(void);
+static herr_t H5FL__arr_gc(void);
+static herr_t H5FL__arr_gc_list(H5FL_arr_head_t *head);
+static int H5FL__arr_term(void);
+static herr_t H5FL__blk_gc(void);
+static herr_t H5FL__blk_gc_list(H5FL_blk_head_t *head);
+static int H5FL__blk_term(void);
+static herr_t H5FL__fac_gc(void);
+static herr_t H5FL__fac_gc_list(H5FL_fac_head_t *head);
+static int H5FL__fac_term_all(void);
 
 /* Declare a free list to manage the H5FL_blk_node_t struct */
 H5FL_DEFINE(H5FL_blk_node_t);
@@ -150,26 +156,66 @@ H5FL_DEFINE(H5FL_fac_head_t);
 
 
 /*--------------------------------------------------------------------------
-NAME
-   H5FL_init_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5FL_init_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.
-
+ NAME
+    H5FL_term_package
+ PURPOSE
+    Terminate various H5FL objects
+ USAGE
+    void H5FL_term_package()
+ RETURNS
+    Success:	Positive if any action might have caused a change in some
+                other interface; zero otherwise.
+   	Failure:	Negative
+ DESCRIPTION
+    Release any resources allocated.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+     Can't report errors...
+ EXAMPLES
+ REVISION LOG
 --------------------------------------------------------------------------*/
-static herr_t
-H5FL_init_interface(void)
+int
+H5FL_term_package(void)
 {
+    int	n = 0;
+
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    /* Nothing currently... */
+    if(H5_PKG_INIT_VAR) {
+        /* Garbage collect any nodes on the free lists */
+        (void)H5FL_garbage_coll();
 
-    FUNC_LEAVE_NOAPI(SUCCEED)
-} /* H5FL_init_interface() */
+        /* Shut down the various kinds of free lists */
+        n += H5FL__reg_term();
+        n += H5FL__fac_term_all();
+        n += H5FL__arr_term();
+        n += H5FL__blk_term();
+
+        /* Mark interface closed */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
+    } /* end if */
+
+#ifdef H5FL_TRACK
+    /* If we haven't freed all the allocated memory, dump out the list now */
+    if(n > 0 && H5FL_out_head_g) {
+        H5FL_track_t *trk = H5FL_out_head_g;
+
+        /* Dump information about all the outstanding allocations */
+        while(trk != NULL) {
+            /* Print information about the outstanding block */
+            HDfprintf(stderr,"%s: Outstanding allocation:\n", FUNC);
+            HDfprintf(stderr,"\tPtr: %p, File: %s, Function: %s, Line: %d\n", (((unsigned char *)trk) + sizeof(H5FL_track_t)), trk->file, trk->func, trk->line);
+            H5CS_print_stack(trk->stack, stderr);
+
+            /* Advance to next node */
+            trk = trk->next;
+        } /* end while */
+    } /* end if */
+#endif /* H5FL_TRACK */
+
+    FUNC_LEAVE_NOAPI(n)
+} /* end H5FL_term_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -191,7 +237,7 @@ H5FL_init_interface(void)
 static void *
 H5FL_malloc(size_t mem_size)
 {
-    void *ret_value;   /* return value*/
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -297,7 +343,6 @@ H5FL_reg_free(H5FL_reg_head_t *head, void *obj)
 
         /* Free tracking information about the allocation location */
         H5CS_close_stack(trk->stack);
-        trk->stack = H5MM_xfree(trk->stack);
         trk->file = H5MM_xfree(trk->file);
         trk->func = H5MM_xfree(trk->func);
 
@@ -337,12 +382,12 @@ H5FL_reg_free(H5FL_reg_head_t *head, void *obj)
     /* Check for exceeding free list memory use limits */
     /* First check this particular list */
     if(head->onlist * head->size > H5FL_reg_lst_mem_lim)
-        if(H5FL_reg_gc_list(head)<0)
+        if(H5FL__reg_gc_list(head) < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, NULL, "garbage collection failed during free")
 
     /* Then check the global amount memory on regular free lists */
     if(H5FL_reg_gc_head.mem_freed>H5FL_reg_glb_mem_lim)
-        if(H5FL_reg_gc()<0)
+        if(H5FL__reg_gc() < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, NULL, "garbage collection failed during free")
 
 done:
@@ -368,7 +413,7 @@ done:
 void *
 H5FL_reg_malloc(H5FL_reg_head_t *head H5FL_TRACK_PARAMS)
 {
-    void *ret_value;        /* Pointer to object to return */
+    void *ret_value = NULL;     /* Pointer to object to return */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -405,8 +450,8 @@ H5FL_reg_malloc(H5FL_reg_head_t *head H5FL_TRACK_PARAMS)
 
 #ifdef H5FL_TRACK
     /* Copy allocation location information */
-    ((H5FL_track_t *)ret_value)->stack = H5MM_calloc(sizeof(H5CS_t));
-    H5CS_copy_stack(((H5FL_track_t *)ret_value)->stack);
+    ((H5FL_track_t *)ret_value)->stack = H5CS_copy_stack();
+    HDassert(((H5FL_track_t *)ret_value)->stack);
     ((H5FL_track_t *)ret_value)->file = H5MM_strdup(call_file);
     ((H5FL_track_t *)ret_value)->func = H5MM_strdup(call_func);
     ((H5FL_track_t *)ret_value)->line = call_line;
@@ -445,7 +490,7 @@ done:
 void *
 H5FL_reg_calloc(H5FL_reg_head_t *head H5FL_TRACK_PARAMS)
 {
-    void *ret_value;        /* Pointer to object to return */
+    void *ret_value = NULL;     /* Pointer to object to return */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -466,7 +511,7 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FL_reg_gc_list
+ * Function:	H5FL__reg_gc_list
  *
  * Purpose:	Garbage collect on a particular object free list
  *
@@ -476,26 +521,25 @@ done:
  * Programmer:	Quincey Koziol
  *              Tuesday, July 25, 2000
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FL_reg_gc_list(H5FL_reg_head_t *head)
+H5FL__reg_gc_list(H5FL_reg_head_t *head)
 {
     H5FL_reg_node_t *free_list; /* Pointer to nodes in free list being garbage collected */
-    void *tmp;          /* Temporary node pointer */
     size_t total_mem;   /* Total memory used on list */
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Calculate the total memory used on this list */
-    total_mem=head->onlist*head->size;
+    total_mem = head->onlist * head->size;
 
     /* For each free list being garbage collected, walk through the nodes and free them */
-    free_list=head->list;
-    while(free_list!=NULL) {
-        tmp=free_list->next;
+    free_list = head->list;
+    while(free_list != NULL) {
+        void *tmp;          /* Temporary node pointer */
+
+        tmp = free_list->next;
 
         /* Decrement the count of nodes allocated and free the node */
         head->allocated--;
@@ -506,18 +550,18 @@ H5FL_reg_gc_list(H5FL_reg_head_t *head)
     } /* end while */
 
     /* Indicate no free nodes on the free list */
-    head->list=NULL;
-    head->onlist=0;
+    head->list = NULL;
+    head->onlist = 0;
 
     /* Decrement global count of free memory on "regular" lists */
-    H5FL_reg_gc_head.mem_freed-=total_mem;
+    H5FL_reg_gc_head.mem_freed -= total_mem;
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-}   /* end H5FL_reg_gc_list() */
+}   /* end H5FL__reg_gc_list() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FL_reg_gc
+ * Function:	H5FL__reg_gc
  *
  * Purpose:	Garbage collect on all the object free lists
  *
@@ -534,30 +578,30 @@ H5FL_reg_gc_list(H5FL_reg_head_t *head)
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FL_reg_gc(void)
+H5FL__reg_gc(void)
 {
     H5FL_reg_gc_node_t *gc_node;    /* Pointer into the list of things to garbage collect */
-    herr_t ret_value=SUCCEED;   /* return value*/
+    herr_t ret_value = SUCCEED;   /* return value*/
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Walk through all the free lists, free()'ing the nodes */
-    gc_node=H5FL_reg_gc_head.first;
-    while(gc_node!=NULL) {
+    gc_node = H5FL_reg_gc_head.first;
+    while(gc_node != NULL) {
         /* Release the free nodes on the list */
-        if(H5FL_reg_gc_list(gc_node->list)<0)
+        if(H5FL__reg_gc_list(gc_node->list) < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "garbage collection of list failed")
 
         /* Go on to the next free list to garbage collect */
-        gc_node=gc_node->next;
+        gc_node = gc_node->next;
     } /* end while */
 
     /* Double check that all the memory on the free lists is recycled */
-    HDassert(H5FL_reg_gc_head.mem_freed==0);
+    HDassert(H5FL_reg_gc_head.mem_freed == 0);
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}   /* end H5FL_reg_gc() */
+}   /* end H5FL__reg_gc() */
 
 
 /*--------------------------------------------------------------------------
@@ -566,7 +610,7 @@ done:
  PURPOSE
     Terminate various H5FL object free lists
  USAGE
-    int H5FL_term()
+    int H5FL_reg_term()
  RETURNS
     Success:	Positive if any action might have caused a change in some
                 other interface; zero otherwise.
@@ -586,50 +630,46 @@ done:
         again to reclaim this layer's memory.
 --------------------------------------------------------------------------*/
 static int
-H5FL_reg_term(void)
+H5FL__reg_term(void)
 {
     H5FL_reg_gc_node_t *left;   /* pointer to garbage collection lists with work left */
-    H5FL_reg_gc_node_t *tmp;    /* Temporary pointer to a garbage collection node */
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
+
+    /* Free the nodes on the garbage collection list, keeping nodes with allocations outstanding */
+    left = NULL;
+    while(H5FL_reg_gc_head.first != NULL) {
+        H5FL_reg_gc_node_t *tmp;    /* Temporary pointer to a garbage collection node */
 
-    if (H5_interface_initialize_g) {
-        /* Free the nodes on the garbage collection list, keeping nodes with allocations outstanding */
-        left=NULL;
-        while(H5FL_reg_gc_head.first!=NULL) {
-            tmp=H5FL_reg_gc_head.first->next;
+        /* Get a copy of the next node */
+        tmp = H5FL_reg_gc_head.first->next;
 
 #ifdef H5FL_DEBUG
-            printf("H5FL_reg_term: head->name=%s, head->allocated=%d\n", H5FL_reg_gc_head.first->list->name,(int)H5FL_reg_gc_head.first->list->allocated);
+printf("%s: head->name = %s, head->allocated = %d\n", FUNC, H5FL_reg_gc_head.first->list->name, (int)H5FL_reg_gc_head.first->list->allocated);
 #endif /* H5FL_DEBUG */
-            /* Check if the list has allocations outstanding */
-            if(H5FL_reg_gc_head.first->list->allocated>0) {
-                /* Add free list to the list of nodes with allocations open still */
-                H5FL_reg_gc_head.first->next=left;
-                left=H5FL_reg_gc_head.first;
-            } /* end if */
-            /* No allocations left open for list, get rid of it */
-            else {
-                /* Reset the "initialized" flag, in case we restart this list somehow (I don't know how..) */
-                H5FL_reg_gc_head.first->list->init=0;
+        /* Check if the list has allocations outstanding */
+        if(H5FL_reg_gc_head.first->list->allocated > 0) {
+            /* Add free list to the list of nodes with allocations open still */
+            H5FL_reg_gc_head.first->next = left;
+            left = H5FL_reg_gc_head.first;
+        } /* end if */
+        /* No allocations left open for list, get rid of it */
+        else {
+            /* Reset the "initialized" flag, in case we restart this list somehow (I don't know how..) */
+            H5FL_reg_gc_head.first->list->init = 0;
 
-                /* Free the node from the garbage collection list */
-                H5MM_xfree(H5FL_reg_gc_head.first);
-            } /* end else */
+            /* Free the node from the garbage collection list */
+            H5MM_xfree(H5FL_reg_gc_head.first);
+        } /* end else */
 
-            H5FL_reg_gc_head.first=tmp;
-        } /* end while */
+        H5FL_reg_gc_head.first = tmp;
+    } /* end while */
 
-        /* Point to the list of nodes left with allocations open, if any */
-        H5FL_reg_gc_head.first=left;
-        if (!left)
-            H5_interface_initialize_g = 0; /*this layer has reached its initial state*/
-    }
+    /* Point to the list of nodes left with allocations open, if any */
+    H5FL_reg_gc_head.first = left;
 
-    /* Terminating this layer never affects other layers; rather, other layers affect
-     * the termination of this layer. */
-    FUNC_LEAVE_NOAPI(0)
-}   /* end H5FL_reg_term() */
+    FUNC_LEAVE_NOAPI(H5FL_reg_gc_head.first != NULL ? 1 : 0)
+}   /* end H5FL__reg_term() */
 
 
 /*-------------------------------------------------------------------------
@@ -654,7 +694,7 @@ H5FL_reg_term(void)
 static H5FL_blk_node_t *
 H5FL_blk_find_list(H5FL_blk_node_t **head, size_t size)
 {
-    H5FL_blk_node_t *temp;  /* Temp. pointer to node in the native list */
+    H5FL_blk_node_t *temp = NULL;  /* Temp. pointer to node in the native list */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -716,7 +756,7 @@ static H5FL_blk_node_t *
 H5FL_blk_create_list(H5FL_blk_node_t **head, size_t size)
 {
     H5FL_blk_node_t *temp;  /* Temp. pointer to node in the list */
-    H5FL_blk_node_t *ret_value;
+    H5FL_blk_node_t *ret_value = NULL;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -809,21 +849,20 @@ done:
 htri_t
 H5FL_blk_free_block_avail(H5FL_blk_head_t *head, size_t size)
 {
-    H5FL_blk_node_t *free_list;  /* The free list of nodes of correct size */
-    htri_t ret_value;   /* Return value */
+    H5FL_blk_node_t *free_list; /* The free list of nodes of correct size */
+    htri_t ret_value = FAIL;    /* Return value */
 
-    FUNC_ENTER_NOAPI(FAIL)
+    FUNC_ENTER_NOAPI_NOERR
 
     /* Double check parameters */
     HDassert(head);
 
     /* check if there is a free list for blocks of this size */
     /* and if there are any blocks available on the list */
-    if((free_list=H5FL_blk_find_list(&(head->head),size))!=NULL && free_list->list!=NULL)
-        ret_value=TRUE;
+    if((free_list = H5FL_blk_find_list(&(head->head), size)) != NULL && free_list->list != NULL)
+        ret_value = TRUE;
     else
-        ret_value=FALSE;
-done:
+        ret_value = FALSE;
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5FL_blk_free_block_avail() */
 
@@ -849,9 +888,9 @@ done:
 void *
 H5FL_blk_malloc(H5FL_blk_head_t *head, size_t size H5FL_TRACK_PARAMS)
 {
-    H5FL_blk_node_t *free_list;  /* The free list of nodes of correct size */
-    H5FL_blk_list_t *temp;  /* Temp. ptr to the new native list allocated */
-    void *ret_value;    /* Pointer to the block to return to the user */
+    H5FL_blk_node_t *free_list; /* The free list of nodes of correct size */
+    H5FL_blk_list_t *temp;      /* Temp. ptr to the new native list allocated */
+    void *ret_value = NULL;     /* Pointer to the block to return to the user */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -897,8 +936,8 @@ H5FL_blk_malloc(H5FL_blk_head_t *head, size_t size H5FL_TRACK_PARAMS)
 
 #ifdef H5FL_TRACK
     /* Copy allocation location information */
-    ((H5FL_track_t *)ret_value)->stack = H5MM_calloc(sizeof(H5CS_t));
-    H5CS_copy_stack(((H5FL_track_t *)ret_value)->stack);
+    ((H5FL_track_t *)ret_value)->stack = H5CS_copy_stack();
+    HDassert(((H5FL_track_t *)ret_value)->stack);
     ((H5FL_track_t *)ret_value)->file = H5MM_strdup(call_file);
     ((H5FL_track_t *)ret_value)->func = H5MM_strdup(call_func);
     ((H5FL_track_t *)ret_value)->line = call_line;
@@ -941,7 +980,7 @@ done:
 void *
 H5FL_blk_calloc(H5FL_blk_head_t *head, size_t size H5FL_TRACK_PARAMS)
 {
-    void *ret_value;    /* Pointer to the block to return to the user */
+    void *ret_value = NULL;     /* Pointer to the block to return to the user */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1001,7 +1040,6 @@ H5FL_blk_free(H5FL_blk_head_t *head, void *block)
 
         /* Free tracking information about the allocation location */
         H5CS_close_stack(trk->stack);
-        trk->stack = H5MM_xfree(trk->stack);
         trk->file = H5MM_xfree(trk->file);
         trk->func = H5MM_xfree(trk->func);
 
@@ -1044,20 +1082,20 @@ H5FL_blk_free(H5FL_blk_head_t *head, void *block)
 
     /* Increment the number of blocks on free list */
     head->onlist++;
-    head->list_mem+=free_size;
+    head->list_mem += free_size;
 
     /* Increment the amount of "block" freed memory globally */
-    H5FL_blk_gc_head.mem_freed+=free_size;
+    H5FL_blk_gc_head.mem_freed += free_size;
 
     /* Check for exceeding free list memory use limits */
     /* First check this particular list */
-    if(head->list_mem>H5FL_blk_lst_mem_lim)
-        if(H5FL_blk_gc_list(head)<0)
+    if(head->list_mem > H5FL_blk_lst_mem_lim)
+        if(H5FL__blk_gc_list(head) < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, NULL, "garbage collection failed during free")
 
     /* Then check the global amount memory on block free lists */
-    if(H5FL_blk_gc_head.mem_freed>H5FL_blk_glb_mem_lim)
-        if(H5FL_blk_gc()<0)
+    if(H5FL_blk_gc_head.mem_freed > H5FL_blk_glb_mem_lim)
+        if(H5FL__blk_gc() < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, NULL, "garbage collection failed during free")
 
 done:
@@ -1121,7 +1159,8 @@ H5FL_blk_realloc(H5FL_blk_head_t *head, void *block, size_t new_size H5FL_TRACK_
                 trk->func = H5MM_xfree(trk->func);
 
                 /* Store new tracking information */
-                H5CS_copy_stack(trk->stack);
+                trk->stack = H5CS_copy_stack();
+                HDassert(trk->stack);
                 trk->file = H5MM_strdup(call_file);
                 trk->func = H5MM_strdup(call_func);
                 trk->line = call_line;
@@ -1140,7 +1179,7 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FL_blk_gc_list
+ * Function:	H5FL__blk_gc_list
  *
  * Purpose:	Garbage collect a priority queue
  *
@@ -1150,34 +1189,33 @@ done:
  * Programmer:	Quincey Koziol
  *              Thursday, March 23, 2000
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FL_blk_gc_list(H5FL_blk_head_t *head)
+H5FL__blk_gc_list(H5FL_blk_head_t *head)
 {
-    H5FL_blk_list_t *list; /* The free list of native nodes of a particular size */
-    void *next;     /* Temp. ptr to the free list list node */
-    void *temp;     /* Temp. ptr to the free list page node */
-
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Loop through all the nodes in the block free list queue */
-    while(head->head!=NULL) {
-        temp=head->head->next;
+    while(head->head != NULL) {
+        H5FL_blk_list_t *list; /* The free list of native nodes of a particular size */
+        void *temp;     /* Temp. ptr to the free list page node */
+
+        temp = head->head->next;
 
         /* Loop through all the blocks in the free list, freeing them */
-        list=head->head->list;
-        while(list!=NULL) {
-            next=list->next;
+        list = head->head->list;
+        while(list != NULL) {
+            void *next;     /* Temp. ptr to the free list list node */
+
+            next = list->next;
 
             /* Decrement the number of blocks & memory allocated from this PQ */
             head->allocated--;
-            head->list_mem-=head->head->size;
+            head->list_mem -= head->head->size;
 
             /* Decrement global count of free memory on "block" lists */
-            H5FL_blk_gc_head.mem_freed-=head->head->size;
+            H5FL_blk_gc_head.mem_freed -= head->head->size;
 
             /* Free the block */
             H5MM_free(list);
@@ -1200,11 +1238,11 @@ H5FL_blk_gc_list(H5FL_blk_head_t *head)
     HDassert(0 == head->list_mem);
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-}   /* end H5FL_blk_gc_list() */
+}   /* end H5FL__blk_gc_list() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FL_blk_gc
+ * Function:	H5FL__blk_gc
  *
  * Purpose:	Garbage collect on all the priority queues
  *
@@ -1214,44 +1252,42 @@ H5FL_blk_gc_list(H5FL_blk_head_t *head)
  * Programmer:	Quincey Koziol
  *              Saturday, March 25, 2000
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FL_blk_gc(void)
+H5FL__blk_gc(void)
 {
     H5FL_blk_gc_node_t *gc_node;    /* Pointer into the list of things to garbage collect */
-    herr_t ret_value=SUCCEED;   /* return value*/
+    herr_t ret_value = SUCCEED;   /* return value*/
 
     FUNC_ENTER_NOAPI_NOINIT
 
     /* Walk through all the free lists, free()'ing the nodes */
-    gc_node=H5FL_blk_gc_head.first;
-    while(gc_node!=NULL) {
+    gc_node = H5FL_blk_gc_head.first;
+    while(gc_node != NULL) {
         /* For each free list being garbage collected, walk through the nodes and free them */
-        if(H5FL_blk_gc_list(gc_node->pq)<0)
+        if(H5FL__blk_gc_list(gc_node->pq) < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "garbage collection of list failed")
 
         /* Go on to the next free list to garbage collect */
-        gc_node=gc_node->next;
+        gc_node = gc_node->next;
     } /* end while */
 
     /* Double check that all the memory on the free lists are recycled */
-    HDassert(H5FL_blk_gc_head.mem_freed==0);
+    HDassert(H5FL_blk_gc_head.mem_freed == 0);
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}   /* end H5FL_blk_gc() */
+}   /* end H5FL__blk_gc() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5FL_blk_term
+    H5FL__blk_term
  PURPOSE
     Terminate various H5FL_blk objects
  USAGE
-    void H5FL_blk_term()
+    void H5FL__blk_term()
  RETURNS
     Success:	Positive if any action might have caused a change in some
                 other interface; zero otherwise.
@@ -1265,45 +1301,46 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 static int
-H5FL_blk_term(void)
+H5FL__blk_term(void)
 {
     H5FL_blk_gc_node_t *left;   /* pointer to garbage collection lists with work left */
-    H5FL_blk_gc_node_t *tmp;    /* Temporary pointer to a garbage collection node */
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Free the nodes on the garbage collection list, keeping nodes with allocations outstanding */
-    left=NULL;
-    while(H5FL_blk_gc_head.first!=NULL) {
-        tmp=H5FL_blk_gc_head.first->next;
+    left = NULL;
+    while(H5FL_blk_gc_head.first != NULL) {
+        H5FL_blk_gc_node_t *tmp;    /* Temporary pointer to a garbage collection node */
+
+        tmp = H5FL_blk_gc_head.first->next;
 
 #ifdef H5FL_DEBUG
-printf("H5FL_blk_term: head->name=%s, head->allocated=%d\n", H5FL_blk_gc_head.first->pq->name,(int)H5FL_blk_gc_head.first->pq->allocated);
+printf("%s: head->name = %s, head->allocated = %d\n", FUNC, H5FL_blk_gc_head.first->pq->name, (int)H5FL_blk_gc_head.first->pq->allocated);
 #endif /* H5FL_DEBUG */
 
         /* Check if the list has allocations outstanding */
-        if(H5FL_blk_gc_head.first->pq->allocated>0) {
+        if(H5FL_blk_gc_head.first->pq->allocated > 0) {
             /* Add free list to the list of nodes with allocations open still */
-            H5FL_blk_gc_head.first->next=left;
-            left=H5FL_blk_gc_head.first;
+            H5FL_blk_gc_head.first->next = left;
+            left = H5FL_blk_gc_head.first;
         } /* end if */
         /* No allocations left open for list, get rid of it */
         else {
             /* Reset the "initialized" flag, in case we restart this list somehow (I don't know how..) */
-            H5FL_blk_gc_head.first->pq->init=0;
+            H5FL_blk_gc_head.first->pq->init = 0;
 
             /* Free the node from the garbage collection list */
             H5MM_free(H5FL_blk_gc_head.first);
         } /* end else */
 
-        H5FL_blk_gc_head.first=tmp;
+        H5FL_blk_gc_head.first = tmp;
     } /* end while */
 
     /* Point to the list of nodes left with allocations open, if any */
-    H5FL_blk_gc_head.first=left;
+    H5FL_blk_gc_head.first = left;
 
-    FUNC_LEAVE_NOAPI(H5FL_blk_gc_head.first!=NULL ? 1 : 0)
-}   /* end H5FL_blk_term() */
+    FUNC_LEAVE_NOAPI(H5FL_blk_gc_head.first != NULL ? 1 : 0)
+}   /* end H5FL__blk_term() */
 
 
 /*-------------------------------------------------------------------------
@@ -1422,13 +1459,13 @@ H5FL_arr_free(H5FL_arr_head_t *head, void *obj)
 
     /* Check for exceeding free list memory use limits */
     /* First check this particular list */
-    if(head->list_mem>H5FL_arr_lst_mem_lim)
-        if(H5FL_arr_gc_list(head)<0)
+    if(head->list_mem > H5FL_arr_lst_mem_lim)
+        if(H5FL__arr_gc_list(head) < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, NULL, "garbage collection failed during free")
 
     /* Then check the global amount memory on array free lists */
-    if(H5FL_arr_gc_head.mem_freed>H5FL_arr_glb_mem_lim)
-        if(H5FL_arr_gc()<0)
+    if(H5FL_arr_gc_head.mem_freed > H5FL_arr_glb_mem_lim)
+        if(H5FL__arr_gc() < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, NULL, "garbage collection failed during free")
 
 done:
@@ -1455,8 +1492,8 @@ void *
 H5FL_arr_malloc(H5FL_arr_head_t *head, size_t elem)
 {
     H5FL_arr_list_t *new_obj;   /* Pointer to the new free list node allocated */
-    void *ret_value;        /* Pointer to object to return */
-    size_t mem_size;        /* Size of memory block being recycled */
+    size_t mem_size;            /* Size of memory block being recycled */
+    void *ret_value = NULL;     /* Pointer to the block to return */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1529,7 +1566,7 @@ done:
 void *
 H5FL_arr_calloc(H5FL_arr_head_t *head, size_t elem)
 {
-    void *ret_value;        /* Pointer to object to return */
+    void *ret_value = NULL;     /* Pointer to the block to return */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1567,51 +1604,50 @@ done:
 void *
 H5FL_arr_realloc(H5FL_arr_head_t *head, void * obj, size_t new_elem)
 {
-    void *ret_value;        /* Pointer to object to return */
+    void *ret_value = NULL;     /* Pointer to the block to return */
 
-    FUNC_ENTER_NOAPI(NULL)
+    FUNC_ENTER_NOAPI_NOERR
 
     /* Double check parameters */
     HDassert(head);
     HDassert(new_elem);
 
     /* Check if we are really allocating the object */
-    if(obj==NULL)
-        ret_value=H5FL_arr_malloc(head,new_elem);
+    if(obj == NULL)
+        ret_value = H5FL_arr_malloc(head, new_elem);
     else {
         H5FL_arr_list_t *temp;  /* Temp. ptr to the new free list node allocated */
 
         /* Sanity check that the number of elements is supported */
-        HDassert((int)new_elem<=head->maxelem);
+        HDassert((int)new_elem <= head->maxelem);
 
         /* Get the pointer to the info header in front of the block to free */
-        temp=(H5FL_arr_list_t *)((unsigned char *)obj-sizeof(H5FL_arr_list_t)); /*lint !e826 Pointer-to-pointer cast is appropriate here */
+        temp = (H5FL_arr_list_t *)((unsigned char *)obj - sizeof(H5FL_arr_list_t)); /*lint !e826 Pointer-to-pointer cast is appropriate here */
 
         /* Check if the size is really changing */
-        if(temp->nelem!=new_elem) {
+        if(temp->nelem != new_elem) {
             size_t blk_size;       /* Size of block */
 
             /* Get the new array of objects */
-            ret_value=H5FL_arr_malloc(head,new_elem);
+            ret_value = H5FL_arr_malloc(head, new_elem);
 
             /* Copy the appropriate amount of elements */
-            blk_size = head->list_arr[ MIN(temp->nelem, new_elem) ].size;
-            HDmemcpy(ret_value,obj,blk_size);
+            blk_size = head->list_arr[MIN(temp->nelem, new_elem)].size;
+            HDmemcpy(ret_value, obj, blk_size);
 
             /* Free the old block */
-            H5FL_arr_free(head,obj);
+            H5FL_arr_free(head, obj);
         } /* end if */
         else
-            ret_value=obj;
+            ret_value = obj;
     } /* end else */
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
 }   /* end H5FL_arr_realloc() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FL_arr_gc_list
+ * Function:	H5FL__arr_gc_list
  *
  * Purpose:	Garbage collect on an array object free list
  *
@@ -1621,29 +1657,29 @@ done:
  * Programmer:	Quincey Koziol
  *              Tuesday, July 25, 2000
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FL_arr_gc_list(H5FL_arr_head_t *head)
+H5FL__arr_gc_list(H5FL_arr_head_t *head)
 {
-    H5FL_arr_list_t *arr_free_list; /* Pointer to nodes in free list being garbage collected */
-    void *tmp;      /* Temporary node pointer */
     unsigned u;     /* Counter for array of free lists */
-    size_t total_mem;   /* Total memory used on list */
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Walk through the array of free lists */
-    for(u=0; u<(unsigned)head->maxelem; u++) {
-        if(head->list_arr[u].onlist>0) {
+    for(u = 0; u < (unsigned)head->maxelem; u++) {
+        if(head->list_arr[u].onlist > 0) {
+            H5FL_arr_list_t *arr_free_list; /* Pointer to nodes in free list being garbage collected */
+            size_t total_mem;   /* Total memory used on list */
+
             /* Calculate the total memory used on this list */
-            total_mem=head->list_arr[u].onlist*head->list_arr[u].size;
+            total_mem = head->list_arr[u].onlist * head->list_arr[u].size;
 
             /* For each free list being garbage collected, walk through the nodes and free them */
-            arr_free_list=head->list_arr[u].list;
-            while(arr_free_list!=NULL) {
+            arr_free_list = head->list_arr[u].list;
+            while(arr_free_list != NULL) {
+                void *tmp;      /* Temporary node pointer */
+
                 tmp = arr_free_list->next;
 
                 /* Decrement the count of nodes allocated and free the node */
@@ -1658,22 +1694,22 @@ H5FL_arr_gc_list(H5FL_arr_head_t *head)
             head->list_arr[u].onlist = 0;
 
             /* Decrement count of free memory on this "array" list */
-            head->list_mem-=total_mem;
+            head->list_mem -= total_mem;
 
             /* Decrement global count of free memory on "array" lists */
-            H5FL_arr_gc_head.mem_freed-=total_mem;
+            H5FL_arr_gc_head.mem_freed -= total_mem;
         } /* end if */
     } /* end for */
 
     /* Double check that all the memory on this list is recycled */
-    HDassert(head->list_mem==0);
+    HDassert(head->list_mem == 0);
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-}   /* end H5FL_arr_gc_list() */
+}   /* end H5FL__arr_gc_list() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FL_arr_gc
+ * Function:	H5FL__arr_gc
  *
  * Purpose:	Garbage collect on all the array object free lists
  *
@@ -1683,44 +1719,42 @@ H5FL_arr_gc_list(H5FL_arr_head_t *head)
  * Programmer:	Quincey Koziol
  *              Saturday, March 25, 2000
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FL_arr_gc(void)
+H5FL__arr_gc(void)
 {
     H5FL_gc_arr_node_t *gc_arr_node;    /* Pointer into the list of things to garbage collect */
-    herr_t ret_value=SUCCEED;   /* return value*/
+    herr_t ret_value = SUCCEED;   /* return value*/
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Walk through all the free lists, free()'ing the nodes */
-    gc_arr_node=H5FL_arr_gc_head.first;
-    while(gc_arr_node!=NULL) {
+    gc_arr_node = H5FL_arr_gc_head.first;
+    while(gc_arr_node != NULL) {
         /* Release the free nodes on the list */
-        if(H5FL_arr_gc_list(gc_arr_node->list)<0)
+        if(H5FL__arr_gc_list(gc_arr_node->list) < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "garbage collection of list failed")
 
         /* Go on to the next free list to garbage collect */
-        gc_arr_node=gc_arr_node->next;
+        gc_arr_node = gc_arr_node->next;
     } /* end while */
 
     /* Double check that all the memory on the free lists are recycled */
-    HDassert(H5FL_arr_gc_head.mem_freed==0);
+    HDassert(H5FL_arr_gc_head.mem_freed == 0);
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}   /* end H5FL_arr_gc() */
+}   /* end H5FL__arr_gc() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5FL_arr_term
+    H5FL__arr_term
  PURPOSE
     Terminate various H5FL array object free lists
  USAGE
-    int H5FL_arr_term()
+    int H5FL__arr_term()
  RETURNS
     Success:	Positive if any action might have caused a change in some
                 other interface; zero otherwise.
@@ -1734,26 +1768,27 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 static int
-H5FL_arr_term(void)
+H5FL__arr_term(void)
 {
     H5FL_gc_arr_node_t *left;   /* pointer to garbage collection lists with work left */
-    H5FL_gc_arr_node_t *tmp;    /* Temporary pointer to a garbage collection node */
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Free the nodes on the garbage collection list, keeping nodes with allocations outstanding */
-    left=NULL;
-    while(H5FL_arr_gc_head.first!=NULL) {
-        tmp=H5FL_arr_gc_head.first->next;
+    left = NULL;
+    while(H5FL_arr_gc_head.first != NULL) {
+        H5FL_gc_arr_node_t *tmp;    /* Temporary pointer to a garbage collection node */
+
+        tmp = H5FL_arr_gc_head.first->next;
 
         /* Check if the list has allocations outstanding */
 #ifdef H5FL_DEBUG
-printf("H5FL_arr_term: head->name=%s, head->allocated=%d\n", H5FL_arr_gc_head.first->list->name,(int)H5FL_arr_gc_head.first->list->allocated);
+printf("%s: head->name = %s, head->allocated = %d\n", FUNC, H5FL_arr_gc_head.first->list->name, (int)H5FL_arr_gc_head.first->list->allocated);
 #endif /* H5FL_DEBUG */
-        if(H5FL_arr_gc_head.first->list->allocated>0) {
+        if(H5FL_arr_gc_head.first->list->allocated > 0) {
             /* Add free list to the list of nodes with allocations open still */
-            H5FL_arr_gc_head.first->next=left;
-            left=H5FL_arr_gc_head.first;
+            H5FL_arr_gc_head.first->next = left;
+            left = H5FL_arr_gc_head.first;
         } /* end if */
         /* No allocations left open for list, get rid of it */
         else {
@@ -1761,20 +1796,20 @@ printf("H5FL_arr_term: head->name=%s, head->allocated=%d\n", H5FL_arr_gc_head.fi
             H5MM_xfree(H5FL_arr_gc_head.first->list->list_arr);
 
             /* Reset the "initialized" flag, in case we restart this list somehow (I don't know how..) */
-            H5FL_arr_gc_head.first->list->init=0;
+            H5FL_arr_gc_head.first->list->init = 0;
 
             /* Free the node from the garbage collection list */
             H5MM_free(H5FL_arr_gc_head.first);
         } /* end else */
 
-        H5FL_arr_gc_head.first=tmp;
+        H5FL_arr_gc_head.first = tmp;
     } /* end while */
 
     /* Point to the list of nodes left with allocations open, if any */
-    H5FL_arr_gc_head.first=left;
+    H5FL_arr_gc_head.first = left;
 
-    FUNC_LEAVE_NOAPI(H5FL_arr_gc_head.first!=NULL ? 1 : 0)
-}   /* end H5FL_arr_term() */
+    FUNC_LEAVE_NOAPI(H5FL_arr_gc_head.first != NULL ? 1 : 0)
+}   /* end H5FL__arr_term() */
 
 
 /*-------------------------------------------------------------------------
@@ -1831,18 +1866,17 @@ H5FL_seq_free(H5FL_seq_head_t *head, void *obj)
 void *
 H5FL_seq_malloc(H5FL_seq_head_t *head, size_t elem H5FL_TRACK_PARAMS)
 {
-    void *ret_value;        /* Pointer to object to return */
+    void *ret_value = NULL;     /* Pointer to the block to return */
 
-    FUNC_ENTER_NOAPI(NULL)
+    FUNC_ENTER_NOAPI_NOERR
 
     /* Double check parameters */
     HDassert(head);
     HDassert(elem);
 
     /* Use block routine */
-    ret_value=H5FL_blk_malloc(&(head->queue),head->size*elem H5FL_TRACK_INFO_INT);
+    ret_value = H5FL_blk_malloc(&(head->queue), head->size * elem H5FL_TRACK_INFO_INT);
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
 }   /* end H5FL_seq_malloc() */
 
@@ -1865,18 +1899,17 @@ done:
 void *
 H5FL_seq_calloc(H5FL_seq_head_t *head, size_t elem H5FL_TRACK_PARAMS)
 {
-    void *ret_value;        /* Pointer to object to return */
+    void *ret_value = NULL;     /* Pointer to the block to return */
 
-    FUNC_ENTER_NOAPI(NULL)
+    FUNC_ENTER_NOAPI_NOERR
 
     /* Double check parameters */
     HDassert(head);
     HDassert(elem);
 
     /* Use block routine */
-    ret_value=H5FL_blk_calloc(&(head->queue),head->size*elem H5FL_TRACK_INFO_INT);
+    ret_value = H5FL_blk_calloc(&(head->queue), head->size * elem H5FL_TRACK_INFO_INT);
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
 }   /* end H5FL_seq_calloc() */
 
@@ -1899,18 +1932,17 @@ done:
 void *
 H5FL_seq_realloc(H5FL_seq_head_t *head, void * obj, size_t new_elem H5FL_TRACK_PARAMS)
 {
-    void *ret_value;        /* Pointer to object to return */
+    void *ret_value = NULL;     /* Pointer to the block to return */
 
-    FUNC_ENTER_NOAPI(NULL)
+    FUNC_ENTER_NOAPI_NOERR
 
     /* Double check parameters */
     HDassert(head);
     HDassert(new_elem);
 
     /* Use block routine */
-    ret_value=H5FL_blk_realloc(&(head->queue),obj,head->size*new_elem H5FL_TRACK_INFO_INT);
+    ret_value = H5FL_blk_realloc(&(head->queue), obj, head->size * new_elem H5FL_TRACK_INFO_INT);
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
 }   /* end H5FL_seq_realloc() */
 
@@ -1936,9 +1968,9 @@ done:
 H5FL_fac_head_t *
 H5FL_fac_init(size_t size)
 {
-    H5FL_fac_gc_node_t  *new_node = NULL; /* Pointer to the node for the new list to garbage collect */
-    H5FL_fac_head_t     *factory = NULL; /* Pointer to new block factory */
-    H5FL_fac_head_t     *ret_value;     /* Return value */
+    H5FL_fac_gc_node_t  *new_node = NULL;       /* Pointer to the node for the new list to garbage collect */
+    H5FL_fac_head_t     *factory = NULL;        /* Pointer to new block factory */
+    H5FL_fac_head_t     *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -2013,7 +2045,7 @@ done:
 void *
 H5FL_fac_free(H5FL_fac_head_t *head, void *obj)
 {
-    void *ret_value=NULL;       /* Return value */
+    void *ret_value = NULL;       /* Return value */
 
     /* NOINIT OK here because this must be called after H5FL_fac_init -NAF */
     FUNC_ENTER_NOAPI_NOINIT
@@ -2028,7 +2060,6 @@ H5FL_fac_free(H5FL_fac_head_t *head, void *obj)
 
         /* Free tracking information about the allocation location */
         H5CS_close_stack(trk->stack);
-        trk->stack = H5MM_xfree(trk->stack);
         trk->file = H5MM_xfree(trk->file);
         trk->func = H5MM_xfree(trk->func);
 
@@ -2054,26 +2085,26 @@ H5FL_fac_free(H5FL_fac_head_t *head, void *obj)
     HDassert(head->init);
 
     /* Link into the free list */
-    ((H5FL_fac_node_t *)obj)->next=head->list;
+    ((H5FL_fac_node_t *)obj)->next = head->list;
 
     /* Point free list at the node freed */
-    head->list=(H5FL_fac_node_t *)obj;
+    head->list = (H5FL_fac_node_t *)obj;
 
     /* Increment the number of blocks on free list */
     head->onlist++;
 
     /* Increment the amount of "factory" freed memory globally */
-    H5FL_fac_gc_head.mem_freed+=head->size;
+    H5FL_fac_gc_head.mem_freed += head->size;
 
     /* Check for exceeding free list memory use limits */
     /* First check this particular list */
     if(head->onlist * head->size > H5FL_fac_lst_mem_lim)
-        if(H5FL_fac_gc_list(head)<0)
+        if(H5FL__fac_gc_list(head) < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, NULL, "garbage collection failed during free")
 
     /* Then check the global amount memory on factory free lists */
     if(H5FL_fac_gc_head.mem_freed > H5FL_fac_glb_mem_lim)
-        if(H5FL_fac_gc()<0)
+        if(H5FL__fac_gc() < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, NULL, "garbage collection failed during free")
 
 done:
@@ -2102,7 +2133,7 @@ done:
 void *
 H5FL_fac_malloc(H5FL_fac_head_t *head H5FL_TRACK_PARAMS)
 {
-    void *ret_value;        /* Pointer to object to return */
+    void *ret_value = NULL;     /* Pointer to the block to return */
 
     /* NOINIT OK here because this must be called after H5FL_fac_init -NAF */
     FUNC_ENTER_NOAPI_NOINIT
@@ -2136,8 +2167,8 @@ H5FL_fac_malloc(H5FL_fac_head_t *head H5FL_TRACK_PARAMS)
 
 #ifdef H5FL_TRACK
     /* Copy allocation location information */
-    ((H5FL_track_t *)ret_value)->stack = H5MM_calloc(sizeof(H5CS_t));
-    H5CS_copy_stack(((H5FL_track_t *)ret_value)->stack);
+    ((H5FL_track_t *)ret_value)->stack = H5CS_copy_stack();
+    HDassert(((H5FL_track_t *)ret_value)->stack);
     ((H5FL_track_t *)ret_value)->file = H5MM_strdup(call_file);
     ((H5FL_track_t *)ret_value)->func = H5MM_strdup(call_func);
     ((H5FL_track_t *)ret_value)->line = call_line;
@@ -2179,7 +2210,7 @@ done:
 void *
 H5FL_fac_calloc(H5FL_fac_head_t *head H5FL_TRACK_PARAMS)
 {
-    void *ret_value;        /* Pointer to object to return */
+    void *ret_value = NULL;     /* Pointer to the block to return */
 
     /* NOINIT OK here because this must be called after H5FL_fac_init -NAF */
     FUNC_ENTER_NOAPI_NOINIT
@@ -2198,9 +2229,10 @@ H5FL_fac_calloc(H5FL_fac_head_t *head H5FL_TRACK_PARAMS)
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 }   /* end H5FL_fac_calloc() */
+
 
 /*-------------------------------------------------------------------------
- * Function:	H5FL_fac_gc_list
+ * Function:	H5FL__fac_gc_list
  *
  * Purpose:	Garbage collect on a particular factory free list
  *
@@ -2210,26 +2242,25 @@ done:
  * Programmer:	Neil Fortner
  *              Friday, December 19, 2008
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FL_fac_gc_list(H5FL_fac_head_t *head)
+H5FL__fac_gc_list(H5FL_fac_head_t *head)
 {
     H5FL_fac_node_t *free_list; /* Pointer to nodes in free list being garbage collected */
-    void *tmp;          /* Temporary node pointer */
     size_t total_mem;   /* Total memory used on list */
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Calculate the total memory used on this list */
-    total_mem=head->onlist*head->size;
+    total_mem = head->onlist * head->size;
 
     /* For each free list being garbage collected, walk through the nodes and free them */
-    free_list=head->list;
-    while(free_list!=NULL) {
-        tmp=free_list->next;
+    free_list = head->list;
+    while(free_list != NULL) {
+        void *tmp;          /* Temporary node pointer */
+
+        tmp = free_list->next;
 
         /* Decrement the count of nodes allocated and free the node */
         head->allocated--;
@@ -2240,18 +2271,18 @@ H5FL_fac_gc_list(H5FL_fac_head_t *head)
     } /* end while */
 
     /* Indicate no free nodes on the free list */
-    head->list=NULL;
-    head->onlist=0;
+    head->list = NULL;
+    head->onlist = 0;
 
     /* Decrement global count of free memory on "factory" lists */
-    H5FL_fac_gc_head.mem_freed-=total_mem;
+    H5FL_fac_gc_head.mem_freed -= total_mem;
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-}   /* end H5FL_fac_gc_list() */
+}   /* end H5FL__fac_gc_list() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FL_fac_gc
+ * Function:	H5FL__fac_gc
  *
  * Purpose:	Garbage collect on all the factory free lists
  *
@@ -2261,35 +2292,33 @@ H5FL_fac_gc_list(H5FL_fac_head_t *head)
  * Programmer:	Neil Fortner
  *              Friday, December 19, 2008
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5FL_fac_gc(void)
+H5FL__fac_gc(void)
 {
     H5FL_fac_gc_node_t *gc_node;    /* Pointer into the list of things to garbage collect */
-    herr_t ret_value=SUCCEED;   /* return value*/
+    herr_t ret_value = SUCCEED;   /* return value*/
 
     FUNC_ENTER_NOAPI_NOINIT
 
     /* Walk through all the free lists, free()'ing the nodes */
-    gc_node=H5FL_fac_gc_head.first;
-    while(gc_node!=NULL) {
+    gc_node = H5FL_fac_gc_head.first;
+    while(gc_node != NULL) {
         /* Release the free nodes on the list */
-        if(H5FL_fac_gc_list(gc_node->list)<0)
+        if(H5FL__fac_gc_list(gc_node->list) < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "garbage collection of list failed")
 
         /* Go on to the next free list to garbage collect */
-        gc_node=gc_node->next;
+        gc_node = gc_node->next;
     } /* end while */
 
     /* Double check that all the memory on the free lists is recycled */
-    HDassert(H5FL_fac_gc_head.mem_freed==0);
+    HDassert(H5FL_fac_gc_head.mem_freed == 0);
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}   /* end H5FL_fac_gc() */
+}   /* end H5FL__fac_gc() */
 
 
 /*-------------------------------------------------------------------------
@@ -2323,11 +2352,11 @@ H5FL_fac_term(H5FL_fac_head_t *factory)
     HDassert(factory);
 
     /* Garbage collect all the blocks in the factory's free list */
-    if(H5FL_fac_gc_list(factory)<0)
+    if(H5FL__fac_gc_list(factory) < 0)
         HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "garbage collection of factory failed")
 
     /* Verify that all the blocks have been freed */
-    if(factory->allocated>0)
+    if(factory->allocated > 0)
         HGOTO_ERROR(H5E_RESOURCE, H5E_CANTRELEASE, FAIL, "factory still has objects allocated")
 
     /* Unlink block free list for factory from global free list */
@@ -2358,7 +2387,7 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5FL_fac_term_all
+ * Function:	H5FL__fac_term_all
  *
  * Purpose:	Terminate all block factories
  *
@@ -2368,23 +2397,21 @@ done:
  * Programmer:	Neil Fortner
  *              Friday, December 19, 2008
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static int
-H5FL_fac_term_all(void)
+H5FL__fac_term_all(void)
 {
-    H5FL_fac_gc_node_t *tmp;    /* Temporary pointer to a garbage collection node */
-
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Free the nodes on the garbage collection list */
     while(H5FL_fac_gc_head.first != NULL) {
-        tmp=H5FL_fac_gc_head.first->next;
+        H5FL_fac_gc_node_t *tmp;    /* Temporary pointer to a garbage collection node */
+
+        tmp = H5FL_fac_gc_head.first->next;
 
 #ifdef H5FL_DEBUG
-printf("H5FL_fac_term: head->size=%d, head->allocated=%d\n", (int)H5FL_fac_gc_head.first->list->size,(int)H5FL_fac_gc_head.first->list->allocated);
+printf("%s: head->size = %d, head->allocated = %d\n", FUNC, (int)H5FL_fac_gc_head.first->list->size, (int)H5FL_fac_gc_head.first->list->allocated);
 #endif /* H5FL_DEBUG */
 
         /* The list cannot have any allocations outstanding */
@@ -2400,7 +2427,7 @@ printf("H5FL_fac_term: head->size=%d, head->allocated=%d\n", (int)H5FL_fac_gc_he
     } /* end while */
 
     FUNC_LEAVE_NOAPI(0)
-}   /* end H5FL_fac_term_all() */
+}   /* end H5FL__fac_term_all() */
 
 
 /*-------------------------------------------------------------------------
@@ -2426,20 +2453,20 @@ H5FL_garbage_coll(void)
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Garbage collect the free lists for array objects */
-    if(H5FL_arr_gc()<0)
+    if(H5FL__arr_gc() < 0)
         HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "can't garbage collect array objects")
 
     /* Garbage collect free lists for blocks */
-    if(H5FL_blk_gc()<0)
+    if(H5FL__blk_gc() < 0)
         HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "can't garbage collect block objects")
 
     /* Garbage collect the free lists for regular objects */
-    if(H5FL_reg_gc()<0)
+    if(H5FL__reg_gc() < 0)
         HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "can't garbage collect regular objects")
 
     /* Garbage collect the free lists for factory objects */
-    if(H5FL_fac_gc()<0)
-        HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "can't garbage collect regular objects")
+    if(H5FL__fac_gc() < 0)
+        HGOTO_ERROR(H5E_RESOURCE, H5E_CANTGC, FAIL, "can't garbage collect factory objects")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
@@ -2482,82 +2509,28 @@ H5FL_set_free_list_limits(int reg_global_lim, int reg_list_lim, int arr_global_l
     int arr_list_lim, int blk_global_lim, int blk_list_lim, int fac_global_lim,
     int fac_list_lim)
 {
-    herr_t                  ret_value = SUCCEED;
+    herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI(FAIL)
+    FUNC_ENTER_NOAPI_NOERR
 
     /* Set the limit variables */
     /* limit on all regular free lists */
-    H5FL_reg_glb_mem_lim=(reg_global_lim==-1 ? UINT_MAX : (size_t)reg_global_lim);
+    H5FL_reg_glb_mem_lim = (reg_global_lim == -1 ? UINT_MAX : (size_t)reg_global_lim);
     /* limit on each regular free list */
-    H5FL_reg_lst_mem_lim=(reg_list_lim==-1 ? UINT_MAX : (size_t)reg_list_lim);
+    H5FL_reg_lst_mem_lim = (reg_list_lim == -1 ? UINT_MAX : (size_t)reg_list_lim);
     /* limit on all array free lists */
-    H5FL_arr_glb_mem_lim=(arr_global_lim==-1 ? UINT_MAX : (size_t)arr_global_lim);
+    H5FL_arr_glb_mem_lim = (arr_global_lim == -1 ? UINT_MAX : (size_t)arr_global_lim);
     /* limit on each array free list */
-    H5FL_arr_lst_mem_lim=(arr_list_lim==-1 ? UINT_MAX : (size_t)arr_list_lim);
+    H5FL_arr_lst_mem_lim = (arr_list_lim == -1 ? UINT_MAX : (size_t)arr_list_lim);
     /* limit on all block free lists */
-    H5FL_blk_glb_mem_lim=(blk_global_lim==-1 ? UINT_MAX : (size_t)blk_global_lim);
+    H5FL_blk_glb_mem_lim = (blk_global_lim == -1 ? UINT_MAX : (size_t)blk_global_lim);
     /* limit on each block free list */
-    H5FL_blk_lst_mem_lim=(blk_list_lim==-1 ? UINT_MAX : (size_t)blk_list_lim);
+    H5FL_blk_lst_mem_lim = (blk_list_lim == -1 ? UINT_MAX : (size_t)blk_list_lim);
     /* limit on all factory free lists */
-    H5FL_fac_glb_mem_lim=(fac_global_lim==-1 ? UINT_MAX : (size_t)fac_global_lim);
+    H5FL_fac_glb_mem_lim = (fac_global_lim == -1 ? UINT_MAX : (size_t)fac_global_lim);
     /* limit on each factory free list */
-    H5FL_fac_lst_mem_lim=(fac_list_lim==-1 ? UINT_MAX : (size_t)fac_list_lim);
+    H5FL_fac_lst_mem_lim = (fac_list_lim == -1 ? UINT_MAX : (size_t)fac_list_lim);
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
 }   /* end H5FL_set_free_list_limits() */
 
-
-/*--------------------------------------------------------------------------
- NAME
-    H5FL_term_interface
- PURPOSE
-    Terminate various H5FL objects
- USAGE
-    void H5FL_term_interface()
- RETURNS
-    Success:	Positive if any action might have caused a change in some
-                other interface; zero otherwise.
-   	Failure:	Negative
- DESCRIPTION
-    Release any resources allocated.
- GLOBAL VARIABLES
- COMMENTS, BUGS, ASSUMPTIONS
-     Can't report errors...
- EXAMPLES
- REVISION LOG
---------------------------------------------------------------------------*/
-int
-H5FL_term_interface(void)
-{
-    int ret_value=0;
-
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    /* Garbage collect any nodes on the free lists */
-    (void)H5FL_garbage_coll();
-
-    ret_value=H5FL_reg_term()+H5FL_fac_term_all()+H5FL_arr_term()+H5FL_blk_term();
-
-#ifdef H5FL_TRACK
-    /* If we haven't freed all the allocated memory, dump out the list now */
-    if(ret_value > 0 && H5FL_out_head_g) {
-        H5FL_track_t *trk = H5FL_out_head_g;
-
-        /* Dump information about all the outstanding allocations */
-        while(trk != NULL) {
-            /* Print information about the outstanding block */
-            HDfprintf(stderr,"%s: Outstanding allocation:\n", "H5FL_term_interface");
-            HDfprintf(stderr,"\tFile: %s, Function: %s, Line: %d\n", trk->file, trk->func, trk->line);
-            H5CS_print_stack(trk->stack, stderr);
-
-            /* Advance to next node */
-            trk = trk->next;
-        } /* end while */
-    } /* end if */
-#endif /* H5FL_TRACK */
-
-    FUNC_LEAVE_NOAPI(ret_value)
-}
-
diff --git a/src/H5FLmodule.h b/src/H5FLmodule.h
new file mode 100644
index 0000000..cfa585c
--- /dev/null
+++ b/src/H5FLmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5FL package.  Including this header means that the source file
+ *		is part of the H5FL package.
+ */
+#ifndef _H5FLmodule_H
+#define _H5FLmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5FL_MODULE
+#define H5_MY_PKG       H5FL
+#define H5_MY_PKG_ERR   H5E_RESOURCE
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5FLmodule_H */
+
diff --git a/src/H5FO.c b/src/H5FO.c
index a6c47cb..a77e268 100644
--- a/src/H5FO.c
+++ b/src/H5FO.c
@@ -21,7 +21,7 @@
  *
  */
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 
 
 #include "H5Eprivate.h"		/* Error handling		  	*/
diff --git a/src/H5FS.c b/src/H5FS.c
index 182ac05..8e5985f 100644
--- a/src/H5FS.c
+++ b/src/H5FS.c
@@ -27,7 +27,8 @@
 /* Module Setup */
 /****************/
 
-#define H5FS_PACKAGE		/*suppress error about including H5FSpkg  */
+#include "H5FSmodule.h"         /* This source code file is part of the H5FS module */
+
 
 /***********/
 /* Headers */
@@ -38,6 +39,7 @@
 #include "H5FSpkg.h"		/* File free space			*/
 #include "H5MFprivate.h"	/* File memory management		*/
 
+
 /****************/
 /* Local Macros */
 /****************/
@@ -66,6 +68,9 @@ static herr_t H5FS_sinfo_free_node_cb(void *item, void *key, void *op_data);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Declare a free list to manage the H5FS_section_class_t sequence information */
 H5FL_SEQ_DEFINE(H5FS_section_class_t);
 
@@ -107,7 +112,7 @@ H5FS_create(H5F_t *f, hid_t dxpl_id, haddr_t *fs_addr, const H5FS_create_t *fs_c
     uint16_t nclasses, const H5FS_section_class_t *classes[], void *cls_init_udata, hsize_t alignment, hsize_t threshold)
 {
     H5FS_t *fspace = NULL;      /* New free space structure */
-    H5FS_t *ret_value;          /* Return value */
+    H5FS_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, H5AC__FREESPACE_TAG, NULL)
 #ifdef H5FS_DEBUG
@@ -196,7 +201,7 @@ H5FS_open(H5F_t *f, hid_t dxpl_id, haddr_t fs_addr, uint16_t nclasses,
 {
     H5FS_t *fspace = NULL;      /* New free space structure */
     H5FS_hdr_cache_ud_t cache_udata; /* User-data for metadata cache callback */
-    H5FS_t *ret_value;          /* Return value */
+    H5FS_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, H5AC__FREESPACE_TAG, NULL)
 #ifdef H5FS_DEBUG
@@ -602,7 +607,7 @@ H5FS__new(const H5F_t *f, uint16_t nclasses, const H5FS_section_class_t *classes
 {
     H5FS_t *fspace = NULL;      /* Free space manager */
     size_t u;                   /* Local index variable */
-    H5FS_t *ret_value;          /* Return value */
+    H5FS_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_PACKAGE
 
diff --git a/src/H5FScache.c b/src/H5FScache.c
index 455a96e..25a16e0 100644
--- a/src/H5FScache.c
+++ b/src/H5FScache.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5FS_PACKAGE		/*suppress error about including H5FSpkg  */
+#include "H5FSmodule.h"         /* This source code file is part of the H5FS module */
+
 
 /***********/
 /* Headers */
@@ -41,6 +42,7 @@
 #include "H5VMprivate.h"	/* Vectors and arrays 			*/
 #include "H5WBprivate.h"        /* Wrapped Buffers                      */
 
+
 /****************/
 /* Local Macros */
 /****************/
@@ -210,7 +212,7 @@ H5FS__cache_hdr_deserialize(const void *_image, size_t len, void *_udata,
     uint32_t            stored_chksum;  /* Stored metadata checksum value */
     uint32_t            computed_chksum; /* Computed metadata checksum value */
     unsigned            nclasses;       /* Number of section classes */
-    H5FS_t		*ret_value;     /* Return value */
+    H5FS_t		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -840,8 +842,8 @@ H5FS__cache_sinfo_deserialize(const void *_image, size_t len, void *_udata,
     size_t                  old_sect_size;  /* Old section size */
     const uint8_t          *image = (const uint8_t *)_image;    /* Pointer into raw data buffer */
     uint32_t                stored_chksum;  /* Stored metadata checksum  */
-    uint32_t                computed_chksum; /* Computed metadata checksum */
-    void *                  ret_value;      /* Return value */
+    uint32_t                computed_chksum;    /* Computed metadata checksum */
+    void *                  ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5FSdbg.c b/src/H5FSdbg.c
index de66ebd..7303b73 100644
--- a/src/H5FSdbg.c
+++ b/src/H5FSdbg.c
@@ -28,10 +28,11 @@
 /* Module Setup */
 /****************/
 
-#define H5FS_PACKAGE		/*suppress error about including H5FSpkg  */
+#include "H5FSmodule.h"         /* This source code file is part of the H5FS module */
 #define H5HF_DEBUGGING          /* Need access to fractal heap debugging routines */
 #define H5MF_DEBUGGING          /* Need access to file space debugging routines */
 
+
 /***********/
 /* Headers */
 /***********/
@@ -41,6 +42,7 @@
 #include "H5HFprivate.h"	/* Fractal heaps			*/
 #include "H5MFprivate.h"	/* File memory management		*/
 
+
 /****************/
 /* Local Macros */
 /****************/
diff --git a/src/H5FSmodule.h b/src/H5FSmodule.h
new file mode 100644
index 0000000..b435b79
--- /dev/null
+++ b/src/H5FSmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5FS package.  Including this header means that the source file
+ *		is part of the H5FS package.
+ */
+#ifndef _H5FSmodule_H
+#define _H5FSmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5FS_MODULE
+#define H5_MY_PKG       H5FS
+#define H5_MY_PKG_ERR   H5E_FSPACE
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5FSmodule_H */
+
diff --git a/src/H5FSpkg.h b/src/H5FSpkg.h
index 2c1eba7..b0df9e6 100644
--- a/src/H5FSpkg.h
+++ b/src/H5FSpkg.h
@@ -21,7 +21,7 @@
  *		the H5FS package.  Source files outside the H5FS package should
  *		include H5FSprivate.h instead.
  */
-#ifndef H5FS_PACKAGE
+#if !(defined H5FS_FRIEND || defined H5FS_MODULE)
 #error "Do not include this file outside the H5FS package!"
 #endif
 
diff --git a/src/H5FSsection.c b/src/H5FSsection.c
index 0b47f51..d447160 100644
--- a/src/H5FSsection.c
+++ b/src/H5FSsection.c
@@ -25,7 +25,7 @@
 /* Module Setup */
 /****************/
 
-#define H5FS_PACKAGE		/*suppress error about including H5FSpkg  */
+#include "H5FSmodule.h"         /* This source code file is part of the H5FS module */
 
 
 /***********/
@@ -126,8 +126,8 @@ H5FL_DEFINE(H5FS_sinfo_t);
 H5FS_sinfo_t *
 H5FS_sinfo_new(H5F_t *f, H5FS_t *fspace)
 {
-    H5FS_sinfo_t *sinfo = NULL; /* Section information struct created */
-    H5FS_sinfo_t *ret_value;    /* Return value */
+    H5FS_sinfo_t *sinfo = NULL;         /* Section information struct created */
+    H5FS_sinfo_t *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5FSstat.c b/src/H5FSstat.c
index 66c5495..390eb9f 100644
--- a/src/H5FSstat.c
+++ b/src/H5FSstat.c
@@ -22,7 +22,8 @@
 /* Module Setup */
 /****************/
 
-#define H5FS_PACKAGE		/*suppress error about including H5FSpkg  */
+#include "H5FSmodule.h"         /* This source code file is part of the H5FS module */
+
 
 /***********/
 /* Headers */
@@ -31,6 +32,7 @@
 #include "H5Eprivate.h"		/* Error handling		  	*/
 #include "H5FSpkg.h"		/* Free-space manager 			*/
 
+
 /****************/
 /* Local Macros */
 /****************/
diff --git a/src/H5FStest.c b/src/H5FStest.c
index 63ba94c..f96ee75 100644
--- a/src/H5FStest.c
+++ b/src/H5FStest.c
@@ -22,9 +22,10 @@
 /* Module Setup */
 /****************/
 
-#define H5FS_PACKAGE		/*suppress error about including H5FSpkg  */
+#include "H5FSmodule.h"         /* This source code file is part of the H5FS module */
 #define H5FS_TESTING		/*suppress warning about H5FS testing funcs */
 
+
 /***********/
 /* Headers */
 /***********/
@@ -32,6 +33,7 @@
 #include "H5Eprivate.h"		/* Error handling		  	*/
 #include "H5FSpkg.h"		/* Free-space manager			*/
 
+
 /****************/
 /* Local Macros */
 /****************/
diff --git a/src/H5Faccum.c b/src/H5Faccum.c
index 99f83bd..53f51ad 100644
--- a/src/H5Faccum.c
+++ b/src/H5Faccum.c
@@ -30,7 +30,7 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /***********/
diff --git a/src/H5Fcwfs.c b/src/H5Fcwfs.c
index 36f0a93..32c73b0 100644
--- a/src/H5Fcwfs.c
+++ b/src/H5Fcwfs.c
@@ -35,7 +35,7 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /***********/
@@ -260,8 +260,9 @@ herr_t
 H5F_cwfs_advance_heap(H5F_t *f, H5HG_heap_t *heap, hbool_t add_heap)
 {
     unsigned u;                         /* Local index variable */
+    herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(FAIL)
 
     /* Check args */
     HDassert(f);
@@ -281,7 +282,8 @@ H5F_cwfs_advance_heap(H5F_t *f, H5HG_heap_t *heap, hbool_t add_heap)
         f->shared->cwfs[f->shared->ncwfs - 1] = heap;
     } /* end if */
 
-    FUNC_LEAVE_NOAPI(SUCCEED)
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
 } /* H5F_cwfs_advance_heap() */
 
 
@@ -302,8 +304,9 @@ herr_t
 H5F_cwfs_remove_heap(H5F_file_t *shared, H5HG_heap_t *heap)
 {
     unsigned u;                         /* Local index variable */
+    herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(FAIL)
 
     /* Check args */
     HDassert(shared);
@@ -318,6 +321,7 @@ H5F_cwfs_remove_heap(H5F_file_t *shared, H5HG_heap_t *heap)
         } /* end if */
     } /* end for */
 
-    FUNC_LEAVE_NOAPI(SUCCEED)
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
 } /* H5F_cwfs_remove_heap() */
 
diff --git a/src/H5Fdbg.c b/src/H5Fdbg.c
index 93da900..11accc6 100644
--- a/src/H5Fdbg.c
+++ b/src/H5Fdbg.c
@@ -19,8 +19,8 @@
  * Purpose:	File object debugging functions.
  */
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg   */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg   */
 
 
 #include "H5private.h"		/* Generic Functions			*/
diff --git a/src/H5Fdeprec.c b/src/H5Fdeprec.c
index 7e2ea17..d16e2d4 100644
--- a/src/H5Fdeprec.c
+++ b/src/H5Fdeprec.c
@@ -31,10 +31,7 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5F__init_deprec_interface
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /***********/
@@ -82,51 +79,6 @@
 /*******************/
 
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5F__init_deprec_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5F__init_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5F_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5F__init_deprec_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5F_init())
-} /* H5F__init_deprec_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5F__term_deprec_interface -- Terminate interface
-USAGE
-    herr_t H5F__term_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5F__term_deprec_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5F__term_deprec_interface() */
-
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Fefc.c b/src/H5Fefc.c
index 9916002..5e3deb1 100644
--- a/src/H5Fefc.c
+++ b/src/H5Fefc.c
@@ -26,7 +26,7 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5F_PACKAGE             /*suppress error about including H5Fpkg   */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /* Packages needed by this file... */
@@ -92,7 +92,7 @@ H5F_efc_t *
 H5F_efc_create(unsigned max_nfiles)
 {
     H5F_efc_t   *efc = NULL;            /* EFC object */
-    H5F_efc_t   *ret_value;             /* Return value */
+    H5F_efc_t   *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -162,8 +162,7 @@ H5F_efc_open(H5F_t *parent, const char *name, unsigned flags, hid_t fcpl_id,
      * support this so clients do not have to make 2 different calls depending
      * on the state of the efc. */
     if(!efc) {
-        if(NULL == (ret_value = H5F_open(name, flags, fcpl_id, fapl_id,
-                                         dxpl_id)))
+        if(NULL == (ret_value = H5F_open(name, flags, fcpl_id, fapl_id, dxpl_id)))
             HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "can't open file")
 
         /* Increment the number of open objects to prevent the file from being
@@ -235,8 +234,7 @@ H5F_efc_open(H5F_t *parent, const char *name, unsigned flags, hid_t fcpl_id,
             } /* end if */
             else {
                 /* Cannot cache file, just open file and return */
-                if(NULL == (ret_value = H5F_open(name, flags, fcpl_id, fapl_id,
-                                                 dxpl_id)))
+                if(NULL == (ret_value = H5F_open(name, flags, fcpl_id, fapl_id, dxpl_id)))
                     HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "can't open file")
 
                 /* Increment the number of open objects to prevent the file from
@@ -257,8 +255,7 @@ H5F_efc_open(H5F_t *parent, const char *name, unsigned flags, hid_t fcpl_id,
             HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed")
 
         /* Open the file */
-        if(NULL == (ent->file = H5F_open(name, flags, fcpl_id, fapl_id,
-                                         dxpl_id)))
+        if(NULL == (ent->file = H5F_open(name, flags, fcpl_id, fapl_id, dxpl_id)))
             HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "can't open file")
         open_file = TRUE;
 
diff --git a/src/H5Ffake.c b/src/H5Ffake.c
index af048bc..e191003 100644
--- a/src/H5Ffake.c
+++ b/src/H5Ffake.c
@@ -13,10 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5F_init_fake_interface
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /* Packages needed by this file... */
@@ -27,28 +24,6 @@
 /* PRIVATE PROTOTYPES */
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5F_init_fake_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5F_init_fake_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5F_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5F_init_fake_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5F_init())
-} /* H5F_init_fake_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:    H5F_fake_alloc
  *
@@ -70,7 +45,7 @@ H5F_t *
 H5F_fake_alloc(uint8_t sizeof_size)
 {
     H5F_t *f = NULL;            /* Pointer to fake file struct */
-    H5F_t *ret_value;           /* Return value */
+    H5F_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
diff --git a/src/H5Fint.c b/src/H5Fint.c
index 0e77349..2412559 100644
--- a/src/H5Fint.c
+++ b/src/H5Fint.c
@@ -17,10 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5F_init_interface
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /***********/
@@ -103,30 +100,6 @@ H5FL_DEFINE(H5F_file_t);
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5F_init_interface
- *
- * Purpose:	Initialize interface-specific information.
- *
- * Return:	Success:	non-negative
- *		Failure:	negative
- *
- * Programmer:	Robb Matzke
- *              Friday, November 20, 1998
- *
- *-------------------------------------------------------------------------
- */
-static herr_t
-H5F_init_interface(void)
-{
-    herr_t ret_value = SUCCEED;                 /* Return value */
-
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5F_init_interface() */
-
-
-/*-------------------------------------------------------------------------
  * Function:	H5F_get_access_plist
  *
  * Purpose:	Returns a copy of the file access property list of the
@@ -154,9 +127,10 @@ H5F_get_access_plist(H5F_t *f, hbool_t app_ref)
 {
     H5P_genplist_t *new_plist;              /* New property list */
     H5P_genplist_t *old_plist;              /* Old property list */
-    void		*driver_info=NULL;
-    unsigned            efc_size = 0;
-    hid_t		ret_value = SUCCEED;
+    H5FD_driver_prop_t driver_prop;         /* Property for driver ID & info */
+    hbool_t driver_prop_copied = FALSE;     /* Whether the driver property has been set up */
+    unsigned    efc_size = 0;
+    hid_t	ret_value = SUCCEED;
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -199,32 +173,26 @@ H5F_get_access_plist(H5F_t *f, hbool_t app_ref)
     if(H5P_set(new_plist, H5F_ACS_EFC_SIZE_NAME, &efc_size) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't set elink file cache size")
 
-    /*
-     * Since we're resetting the driver ID and info, close them if they
-     * exist in this new property list.
-     */
-    if(H5P_facc_close(ret_value, NULL) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "can't free the old driver information")
-
-    /* Increment the reference count on the driver ID and insert it into the property list */
-    if(H5I_inc_ref(f->shared->lf->driver_id, FALSE) < 0)
-        HGOTO_ERROR(H5E_FILE, H5E_CANTINC, FAIL, "unable to increment ref count on VFL driver")
-    if(H5P_set(new_plist, H5F_ACS_FILE_DRV_ID_NAME, &(f->shared->lf->driver_id)) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set file driver ID")
+    /* Prepare the driver property */
+    driver_prop.driver_id = f->shared->lf->driver_id;
+    driver_prop.driver_info = H5FD_fapl_get(f->shared->lf);
+    driver_prop_copied = TRUE;
 
-    /* Set the driver "info" in the property list */
-    driver_info = H5FD_fapl_get(f->shared->lf);
-    if(driver_info != NULL && H5P_set(new_plist, H5F_ACS_FILE_DRV_INFO_NAME, &driver_info) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set file driver info")
+    /* Set the driver property */
+    if(H5P_set(new_plist, H5F_ACS_FILE_DRV_NAME, &driver_prop) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set file driver ID & info")
 
     /* Set the file close degree appropriately */
-    if(f->shared->fc_degree == H5F_CLOSE_DEFAULT && H5P_set(new_plist, H5F_ACS_CLOSE_DEGREE_NAME, &(f->shared->lf->cls->fc_degree)) < 0) {
+    if(f->shared->fc_degree == H5F_CLOSE_DEFAULT && H5P_set(new_plist, H5F_ACS_CLOSE_DEGREE_NAME, &(f->shared->lf->cls->fc_degree)) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set file close degree")
-    } else if(f->shared->fc_degree != H5F_CLOSE_DEFAULT && H5P_set(new_plist, H5F_ACS_CLOSE_DEGREE_NAME, &(f->shared->fc_degree)) < 0) {
+    else if(f->shared->fc_degree != H5F_CLOSE_DEFAULT && H5P_set(new_plist, H5F_ACS_CLOSE_DEGREE_NAME, &(f->shared->fc_degree)) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set file close degree")
-    }
 
 done:
+    /* Release the copy of the driver info, if it was set up */
+    if(driver_prop_copied && H5FD_fapl_close(driver_prop.driver_id, driver_prop.driver_info) < 0)
+        HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEOBJ, FAIL, "can't close copy of driver info")
+
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5F_get_access_plist() */
 
@@ -533,7 +501,7 @@ H5F_is_hdf5(const char *name)
 {
     H5FD_t	*file = NULL;           /* Low-level file struct */
     haddr_t     sig_addr;               /* Addess of hdf5 file signature */
-    htri_t	ret_value;              /* Return value */
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -581,7 +549,7 @@ done:
 H5F_t *
 H5F_new(H5F_file_t *shared, unsigned flags, hid_t fcpl_id, hid_t fapl_id, H5FD_t *lf)
 {
-    H5F_t	*f = NULL, *ret_value;
+    H5F_t	*f = NULL, *ret_value = NULL;
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -955,7 +923,7 @@ H5F_open(const char *name, unsigned flags, hid_t fcpl_id, hid_t fapl_id,
     H5FD_class_t       *drvr;               /*file driver class info        */
     H5P_genplist_t     *a_plist;            /*file access property list     */
     H5F_close_degree_t  fc_degree;          /*file close degree             */
-    H5F_t              *ret_value;          /*actual return value           */
+    H5F_t              *ret_value = NULL;   /*actual return value           */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1454,7 +1422,7 @@ done:
 hid_t
 H5F_get_id(H5F_t *file, hbool_t app_ref)
 {
-    hid_t       ret_value;
+    hid_t ret_value = H5I_INVALID_HID;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1978,7 +1946,7 @@ H5F_get_file_image(H5F_t *file, void *buf_ptr, size_t buf_len)
 {
     H5FD_t     *fd_ptr;                 /* file driver */
     haddr_t     eoa;                    /* End of file address */
-    ssize_t     ret_value;              /* Return value */
+    ssize_t     ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Fio.c b/src/H5Fio.c
index 763bd69..04c4055 100644
--- a/src/H5Fio.c
+++ b/src/H5Fio.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /***********/
diff --git a/src/H5Fmodule.h b/src/H5Fmodule.h
new file mode 100644
index 0000000..4bb2506
--- /dev/null
+++ b/src/H5Fmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5F package.  Including this header means that the source file
+ *		is part of the H5F package.
+ */
+#ifndef _H5Fmodule_H
+#define _H5Fmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5F_MODULE
+#define H5_MY_PKG       H5F
+#define H5_MY_PKG_ERR   H5E_FILE
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Fmodule_H */
+
diff --git a/src/H5Fmount.c b/src/H5Fmount.c
index 643eba5..99fa4f2 100644
--- a/src/H5Fmount.c
+++ b/src/H5Fmount.c
@@ -13,10 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5F_init_mount_interface
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /* Packages needed by this file... */
@@ -36,28 +33,6 @@ static herr_t H5F_unmount(H5G_loc_t *loc, const char *name, hid_t dxpl_id);
 static void H5F_mount_count_ids_recurse(H5F_t *f, unsigned *nopen_files, unsigned *nopen_objs);
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5F_init_mount_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5F_init_mount_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5F_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5F_init_mount_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5F_init())
-} /* H5F_init_mount_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5F_close_mounts
  *
@@ -439,7 +414,7 @@ done:
 hbool_t
 H5F_is_mount(const H5F_t *file)
 {
-    hbool_t ret_value;   /* Return value */
+    hbool_t ret_value = FALSE;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Fmpi.c b/src/H5Fmpi.c
index 39b8dfa..fe2a774 100644
--- a/src/H5Fmpi.c
+++ b/src/H5Fmpi.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /***********/
diff --git a/src/H5Fpkg.h b/src/H5Fpkg.h
index 175fa88..2255085 100644
--- a/src/H5Fpkg.h
+++ b/src/H5Fpkg.h
@@ -21,7 +21,7 @@
  *		the H5F package.  Source files outside the H5F package should
  *		include H5Fprivate.h instead.
  */
-#ifndef H5F_PACKAGE
+#if !(defined H5F_FRIEND || defined H5F_MODULE)
 #error "Do not include this file outside the H5F package!"
 #endif
 
@@ -333,8 +333,6 @@ H5_DLLVAR const H5AC_class_t H5AC_DRVRINFO[1];
 /******************************/
 
 /* General routines */
-H5_DLL herr_t H5F_init(void);
-H5_DLL herr_t H5F__term_deprec_interface(void);
 H5F_t *H5F_new(H5F_file_t *shared, unsigned flags, hid_t fcpl_id,
     hid_t fapl_id, H5FD_t *lf);
 herr_t H5F_dest(H5F_t *f, hid_t dxpl_id, hbool_t flush);
diff --git a/src/H5Fprivate.h b/src/H5Fprivate.h
index 36d7429..658d123 100644
--- a/src/H5Fprivate.h
+++ b/src/H5Fprivate.h
@@ -270,7 +270,7 @@
                                  ((O1) >= (O2) && (O1) < ((O2) + (L2))))
 
 /* If the module using this macro is allowed access to the private variables, access them directly */
-#ifdef H5F_PACKAGE
+#ifdef H5F_MODULE
 #define H5F_INTENT(F)           ((F)->shared->flags)
 #define H5F_OPEN_NAME(F)        ((F)->open_name)
 #define H5F_ACTUAL_NAME(F)      ((F)->actual_name)
@@ -312,7 +312,7 @@
 #define H5F_SET_GRP_BTREE_SHARED(F, RC) (((F)->shared->grp_btree_shared = (RC)) ? SUCCEED : FAIL)
 #define H5F_USE_TMP_SPACE(F)    ((F)->shared->use_tmp_space)
 #define H5F_IS_TMP_ADDR(F, ADDR) (H5F_addr_le((F)->shared->tmp_addr, (ADDR)))
-#else /* H5F_PACKAGE */
+#else /* H5F_MODULE */
 #define H5F_INTENT(F)           (H5F_get_intent(F))
 #define H5F_OPEN_NAME(F)        (H5F_get_open_name(F))
 #define H5F_ACTUAL_NAME(F)      (H5F_get_actual_name(F))
@@ -354,7 +354,7 @@
 #define H5F_SET_GRP_BTREE_SHARED(F, RC) (H5F_set_grp_btree_shared((F), (RC)))
 #define H5F_USE_TMP_SPACE(F)    (H5F_use_tmp_space(F))
 #define H5F_IS_TMP_ADDR(F, ADDR) (H5F_is_tmp_addr((F), (ADDR)))
-#endif /* H5F_PACKAGE */
+#endif /* H5F_MODULE */
 
 
 /* Macros to encode/decode offset/length's for storing in the file */
@@ -442,8 +442,7 @@
 #define H5F_ACS_SIEVE_BUF_SIZE_NAME             "sieve_buf_size" /* Maximum sieve buffer size (when data sieving is allowed by file driver) */
 #define H5F_ACS_SDATA_BLOCK_SIZE_NAME           "sdata_block_size" /* Minimum "small data" allocation block size (when aggregating "small" raw data allocations) */
 #define H5F_ACS_GARBG_COLCT_REF_NAME            "gc_ref"        /* Garbage-collect references */
-#define H5F_ACS_FILE_DRV_ID_NAME                "driver_id"     /* File driver ID */
-#define H5F_ACS_FILE_DRV_INFO_NAME              "driver_info"   /* File driver info */
+#define H5F_ACS_FILE_DRV_NAME                   "driver-id/info" /* File driver ID & info */
 #define H5F_ACS_CLOSE_DEGREE_NAME		"close_degree"  /* File close degree */
 #define H5F_ACS_FAMILY_OFFSET_NAME              "family_offset" /* Offset position in file for family file driver */
 #define H5F_ACS_FAMILY_NEWSIZE_NAME             "family_newsize" /* New member size of family driver.  (private property only used by h5repart) */
@@ -667,9 +666,6 @@ H5_DLL void H5F_addr_encode_len(size_t addr_len, uint8_t **pp, haddr_t addr);
 H5_DLL void H5F_addr_decode(const H5F_t *f, const uint8_t **pp, haddr_t *addr_p);
 H5_DLL void H5F_addr_decode_len(size_t addr_len, const uint8_t **pp, haddr_t *addr_p);
 
-/* File access property list callbacks */
-H5_DLL herr_t H5P_facc_close(hid_t dxpl_id, void *close_data);
-
 /* Shared file list related routines */
 H5_DLL void H5F_sfile_assert_num(unsigned n);
 
diff --git a/src/H5Fquery.c b/src/H5Fquery.c
index 6290614..05667ac 100644
--- a/src/H5Fquery.c
+++ b/src/H5Fquery.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /***********/
@@ -968,7 +968,7 @@ done:
 haddr_t
 H5F_get_eoa(const H5F_t *f, H5FD_mem_t type)
 {
-    haddr_t	ret_value;
+    haddr_t	ret_value = HADDR_UNDEF;        /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 
diff --git a/src/H5Fsfile.c b/src/H5Fsfile.c
index a1c6976..4fb9cd9 100644
--- a/src/H5Fsfile.c
+++ b/src/H5Fsfile.c
@@ -13,7 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 /* Packages needed by this file... */
 #include "H5private.h"		/* Generic Functions			*/
diff --git a/src/H5Fsuper.c b/src/H5Fsuper.c
index d353d4f..50f6b06 100644
--- a/src/H5Fsuper.c
+++ b/src/H5Fsuper.c
@@ -17,10 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5F_init_super_interface
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 
 
 /***********/
@@ -77,28 +74,6 @@ H5FL_DEFINE(H5F_super_t);
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5F_init_super_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5F_init_super_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5F_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5F_init_super_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5F_init())
-} /* H5F_init_super_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:    H5F_super_ext_create
  *
diff --git a/src/H5Fsuper_cache.c b/src/H5Fsuper_cache.c
index 477f58f..c2c7bc9 100644
--- a/src/H5Fsuper_cache.c
+++ b/src/H5Fsuper_cache.c
@@ -28,8 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg	  */
 
 
 /***********/
@@ -199,7 +199,7 @@ H5F__cache_superblock_deserialize(const void *_image, size_t len, void *_udata,
     unsigned            super_vers;     /* Superblock version */
     uint8_t             sizeof_addr;    /* Size of offsets in the file (in bytes) */
     uint8_t             sizeof_size;    /* Size of lengths in the file (in bytes) */
-    H5F_super_t         *ret_value;     /* Return value */
+    H5F_super_t         *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -824,7 +824,7 @@ H5F__cache_drvrinfo_deserialize(const void *_image, size_t len, void *_udata,
     const uint8_t	*image = (const uint8_t *)_image;       /* Pointer into raw data buffer */
     char                drv_name[9];    /* Name of driver */
     unsigned            drv_vers;       /* Version of driver info block */
-    H5O_drvinfo_t       *ret_value;     /* Return value */
+    H5O_drvinfo_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5Ftest.c b/src/H5Ftest.c
index 73b00a6..b741e0d 100644
--- a/src/H5Ftest.c
+++ b/src/H5Ftest.c
@@ -28,12 +28,12 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg  */
+#include "H5Fmodule.h"          /* This source code file is part of the H5F module */
 #define H5F_TESTING		/*suppress warning about H5F testing funcs*/
-#define H5SM_PACKAGE		/*suppress error about including H5SMpkg  */
-#define H5SM_TESTING		/*suppress warning about H5SM testing funcs*/
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg  */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg  */
 #define H5G_TESTING		/*suppress warning about H5G testing funcs*/
+#define H5SM_FRIEND		/*suppress error about including H5SMpkg  */
+#define H5SM_TESTING		/*suppress warning about H5SM testing funcs*/
 
 
 /***********/
diff --git a/src/H5G.c b/src/H5G.c
index 8fd65b8..089dc50 100644
--- a/src/H5G.c
+++ b/src/H5G.c
@@ -79,10 +79,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5G_init_interface
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -120,6 +117,9 @@
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -138,36 +138,13 @@ static const H5I_class_t H5I_GROUP_CLS[1] = {{
     (H5I_free_t)H5G_close	/* Callback routine for closing objects of this class */
 }};
 
+/* Flag indicating "top" of interface has been initialized */
+static hbool_t H5G_top_package_initialize_s = FALSE;
 
-
-/*-------------------------------------------------------------------------
- * Function:	H5G__init
- *
- * Purpose:	Initialize the interface from some other package.
- *
- * Return:	Success:	non-negative
- *		Failure:	negative
- *
- * Programmer:	Quincey Koziol
- *              Saturday, November 11, 2006
- *
- *-------------------------------------------------------------------------
- */
-herr_t
-H5G__init(void)
-{
-    herr_t ret_value = SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI(FAIL)
-    /* FUNC_ENTER() does all the work */
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5G__init() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5G_init_interface
+ * Function:	H5G__init_package
  *
  * Purpose:	Initializes the H5G interface.
  *
@@ -177,7 +154,7 @@ done:
  *		Monday, January	 5, 1998
  *
  * Notes:       The group creation properties are registered in the property
- *              list interface initialization routine (H5P_init_interface)
+ *              list interface initialization routine (H5P_init_package)
  *              so that the file creation property class can inherit from it
  *              correctly. (Which allows the file creation property list to
  *              control the group creation properties of the root group of
@@ -185,64 +162,100 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t
-H5G_init_interface(void)
+herr_t
+H5G__init_package(void)
 {
     herr_t          ret_value = SUCCEED;  /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_PACKAGE
 
     /* Initialize the atom group for the group IDs */
     if(H5I_register_type(H5I_GROUP_CLS) < 0)
 	HGOTO_ERROR(H5E_SYM, H5E_CANTINIT, FAIL, "unable to initialize interface")
 
+    /* Mark "top" of interface as initialized, too */
+    H5G_top_package_initialize_s = TRUE;
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5G_init_interface() */
+} /* end H5G__init_package() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5G_term_interface
+ * Function:	H5G_top_term_package
  *
- * Purpose:	Terminates the H5G interface
+ * Purpose:	Close the "top" of the interface, releasing IDs, etc.
  *
  * Return:	Success:	Positive if anything is done that might
  *				affect other interfaces; zero otherwise.
- *
  * 		Failure:	Negative.
  *
- * Programmer:	Robb Matzke
- *		Monday, January	 5, 1998
+ * Programmer:	Quincey Koziol
+ *		Sunday, September	13, 2015
  *
  *-------------------------------------------------------------------------
  */
 int
-H5G_term_interface(void)
+H5G_top_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5G_top_package_initialize_s) {
         if(H5I_nmembers(H5I_GROUP) > 0) {
             (void)H5I_clear_type(H5I_GROUP, FALSE, FALSE);
             n++; /*H5I*/
         } /* end if */
-        else {
-            /* Close deprecated interface */
-            n += H5G__term_deprec_interface();
 
-            /* Destroy the group object id group */
-            (void)H5I_dec_type_ref(H5I_GROUP);
-            n++; /*H5I*/
+        /* Mark closed */
+        if(0 == n)
+            H5G_top_package_initialize_s = FALSE;
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(n)
+} /* end H5G_top_term_package() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:	H5G_term_package
+ *
+ * Purpose:	Terminates the H5G interface
+ *
+ * Note:	Finishes shutting down the interface, after
+ *		H5G_top_term_package() is called
+ *
+ * Return:	Success:	Positive if anything is done that might
+ *				affect other interfaces; zero otherwise.
+ * 		Failure:	Negative.
+ *
+ * Programmer:	Robb Matzke
+ *		Monday, January	 5, 1998
+ *
+ *-------------------------------------------------------------------------
+ */
+int
+H5G_term_package(void)
+{
+    int	n = 0;
+
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+    if(H5_PKG_INIT_VAR) {
+        /* Sanity checks */
+        HDassert(0 == H5I_nmembers(H5I_GROUP));
+        HDassert(FALSE == H5G_top_package_initialize_s);
+
+        /* Destroy the group object id group */
+        n += (H5I_dec_type_ref(H5I_GROUP) > 0);
 
-            /* Mark closed */
-            H5_interface_initialize_g = 0;
-        } /* end else */
+        /* Mark closed */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5G_term_interface() */
+} /* end H5G_term_package() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Gbtree2.c b/src/H5Gbtree2.c
index 31db886..104e6b3 100644
--- a/src/H5Gbtree2.c
+++ b/src/H5Gbtree2.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -232,7 +232,7 @@ H5G_dense_btree2_name_compare(const void *_bt2_udata, const void *_bt2_rec)
 {
     const H5G_bt2_ud_common_t *bt2_udata = (const H5G_bt2_ud_common_t *)_bt2_udata;
     const H5G_dense_bt2_name_rec_t *bt2_rec = (const H5G_dense_bt2_name_rec_t *)_bt2_rec;
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -420,7 +420,7 @@ H5G_dense_btree2_corder_compare(const void *_bt2_udata, const void *_bt2_rec)
 {
     const H5G_bt2_ud_common_t *bt2_udata = (const H5G_bt2_ud_common_t *)_bt2_udata;
     const H5G_dense_bt2_corder_rec_t *bt2_rec = (const H5G_dense_bt2_corder_rec_t *)_bt2_rec;
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Gcache.c b/src/H5Gcache.c
index f765b41..e7d44b5 100644
--- a/src/H5Gcache.c
+++ b/src/H5Gcache.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg   */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -178,7 +178,7 @@ H5G__cache_node_deserialize(const void *_image, size_t len, void *_udata,
     H5F_t                  *f = (H5F_t *)_udata;        /* User data for callback */
     H5G_node_t             *sym = NULL; /* Symbol table node created */
     const uint8_t          *image = (const uint8_t *)_image;    /* Pointer to image to deserialize */
-    void *                  ret_value;  /* Return value */
+    void                   *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5Gcompact.c b/src/H5Gcompact.c
index 89e79cc..41ca4f5 100644
--- a/src/H5Gcompact.c
+++ b/src/H5Gcompact.c
@@ -23,7 +23,7 @@
  *
  *-------------------------------------------------------------------------
  */
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /* Packages needed by this file... */
@@ -224,8 +224,8 @@ H5G__compact_get_name_by_idx(const H5O_loc_t *oloc, hid_t dxpl_id,
     const H5O_linfo_t *linfo, H5_index_t idx_type, H5_iter_order_t order,
     hsize_t idx, char* name, size_t size)
 {
-    H5G_link_table_t    ltable = {0, NULL};         /* Link table */
-    ssize_t		ret_value;      /* Return value */
+    H5G_link_table_t    ltable = {0, NULL};     /* Link table */
+    ssize_t		ret_value = -1;         /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -411,7 +411,7 @@ H5G__compact_iterate(const H5O_loc_t *oloc, hid_t dxpl_id, const H5O_linfo_t *li
     H5G_lib_iterate_t op, void *op_data)
 {
     H5G_link_table_t    ltable = {0, NULL};     /* Link table */
-    herr_t		ret_value;              /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -503,7 +503,7 @@ H5G__compact_lookup(const H5O_loc_t *oloc, const char *name, H5O_link_t *lnk,
 {
     H5G_iter_lkp_t udata;               /* User data for iteration callback */
     H5O_mesg_operator_t op;             /* Message operator */
-    htri_t     ret_value;               /* Return value */
+    htri_t     ret_value = FAIL;        /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -598,7 +598,7 @@ H5G__compact_get_type_by_idx(H5O_loc_t *oloc, hid_t dxpl_id, const H5O_linfo_t *
     hsize_t idx)
 {
     H5G_link_table_t    ltable = {0, NULL};         /* Link table */
-    H5G_obj_t		ret_value;      /* Return value */
+    H5G_obj_t		ret_value = H5G_UNKNOWN;    /* Return value */
 
     FUNC_ENTER_PACKAGE
 
diff --git a/src/H5Gdense.c b/src/H5Gdense.c
index 285355f..ab0547b 100644
--- a/src/H5Gdense.c
+++ b/src/H5Gdense.c
@@ -29,7 +29,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 /***********/
 /* Headers */
@@ -540,7 +540,7 @@ H5G__dense_lookup(H5F_t *f, hid_t dxpl_id, const H5O_linfo_t *linfo,
     H5G_bt2_ud_common_t udata;          /* User data for v2 B-tree link lookup */
     H5HF_t *fheap = NULL;               /* Fractal heap handle */
     H5B2_t *bt2_name = NULL;            /* v2 B-tree handle for name index */
-    htri_t ret_value;                   /* Return value */
+    htri_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -991,7 +991,7 @@ H5G__dense_iterate(H5F_t *f, hid_t dxpl_id, const H5O_linfo_t *linfo,
     H5G_link_table_t ltable = {0, NULL};      /* Table of links */
     H5B2_t *bt2 = NULL;                 /* v2 B-tree handle for index */
     haddr_t bt2_addr;                   /* Address of v2 B-tree to use for lookup */
-    herr_t ret_value;                   /* Return value */
+    herr_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -1197,7 +1197,7 @@ H5G__dense_get_name_by_idx(H5F_t *f, hid_t dxpl_id, H5O_linfo_t *linfo,
     H5G_link_table_t ltable = {0, NULL};      /* Table of links */
     H5B2_t *bt2 = NULL;         /* v2 B-tree handle for index */
     haddr_t bt2_addr;           /* Address of v2 B-tree to use for lookup */
-    ssize_t ret_value;          /* Return value */
+    ssize_t ret_value = -1;     /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -1836,8 +1836,8 @@ H5G_obj_t
 H5G__dense_get_type_by_idx(H5F_t *f, hid_t dxpl_id, H5O_linfo_t *linfo,
     hsize_t idx)
 {
-    H5G_link_table_t ltable = {0, NULL};         /* Table of links */
-    H5G_obj_t ret_value;        /* Return value */
+    H5G_link_table_t ltable = {0, NULL};        /* Table of links */
+    H5G_obj_t ret_value = H5G_UNKNOWN;          /* Return value */
 
     FUNC_ENTER_PACKAGE
 
diff --git a/src/H5Gdeprec.c b/src/H5Gdeprec.c
index 4e3572e..e0bc78e 100644
--- a/src/H5Gdeprec.c
+++ b/src/H5Gdeprec.c
@@ -31,10 +31,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5G__init_deprec_interface
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -106,51 +103,6 @@ static H5G_obj_t H5G_obj_get_type_by_idx(H5O_loc_t *oloc, hsize_t idx,
 /*******************/
 
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5G__init_deprec_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5G__init_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5G__init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5G__init_deprec_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5G__init())
-} /* H5G__init_deprec_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5G__term_deprec_interface -- Terminate interface
-USAGE
-    herr_t H5G__term_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5G__term_deprec_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5G__term_deprec_interface() */
-
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 
 /*-------------------------------------------------------------------------
@@ -168,7 +120,7 @@ H5G__term_deprec_interface(void)
 H5G_obj_t
 H5G_map_obj_type(H5O_type_t obj_type)
 {
-    H5G_obj_t ret_value;        /* Return value */
+    H5G_obj_t ret_value = H5G_UNKNOWN;  /* Return value */
 
     /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
     FUNC_ENTER_NOAPI_NOINIT_NOERR
@@ -1164,7 +1116,7 @@ H5G_obj_get_type_by_idx(H5O_loc_t *oloc, hsize_t idx, hid_t dxpl_id)
 {
     H5O_linfo_t	linfo;		/* Link info message */
     htri_t linfo_exists;        /* Whether the link info message exists */
-    H5G_obj_t ret_value;        /* Return value */
+    H5G_obj_t ret_value = H5G_UNKNOWN;  /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, oloc->addr, H5G_UNKNOWN)
 
diff --git a/src/H5Gent.c b/src/H5Gent.c
index 3809933..8df8414 100644
--- a/src/H5Gent.c
+++ b/src/H5Gent.c
@@ -22,7 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
diff --git a/src/H5Gint.c b/src/H5Gint.c
index 04b21a5..ea8288c 100644
--- a/src/H5Gint.c
+++ b/src/H5Gint.c
@@ -28,10 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5G_init_int_interface
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -119,34 +116,6 @@ H5FL_DEFINE(H5_obj_t);
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5G_init_int_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5G_init_int_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5G__init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5G_init_int_interface(void)
-{
-    herr_t ret_value = SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI_NOINIT
-
-    /* Funnel all work to H5G__init() */
-    if(H5G__init() < 0)
-        HGOTO_ERROR(H5E_FUNC, H5E_CANTINIT, FAIL, "interface initialization failed")
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* H5G_init_int_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5G__create_named
  *
@@ -167,7 +136,7 @@ H5G__create_named(const H5G_loc_t *loc, const char *name, hid_t lcpl_id,
 {
     H5O_obj_create_t ocrt_info;         /* Information for object creation */
     H5G_obj_create_t gcrt_info;         /* Information for group creation */
-    H5G_t	   *ret_value;          /* Return value */
+    H5G_t *ret_value = NULL;            /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -225,7 +194,7 @@ H5G__create(H5F_t *file, H5G_obj_create_t *gcrt_info, hid_t dxpl_id)
 {
     H5G_t	*grp = NULL;	/*new group			*/
     unsigned    oloc_init = 0;  /* Flag to indicate that the group object location was created successfully */
-    H5G_t	*ret_value;	/* Return value */
+    H5G_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -302,7 +271,7 @@ H5G__open_name(const H5G_loc_t *loc, const char *name, hid_t gapl_id,
     H5O_loc_t   grp_oloc;            	/* Opened object object location */
     hbool_t     loc_found = FALSE;      /* Location at 'name' found */
     H5O_type_t  obj_type;               /* Type of object at location */
-    H5G_t      *ret_value;              /* Return value */
+    H5G_t *ret_value = NULL;            /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -363,7 +332,7 @@ H5G_open(const H5G_loc_t *loc, hid_t dxpl_id)
 {
     H5G_t           *grp = NULL;        /* Group opened */
     H5G_shared_t    *shared_fo;         /* Shared group object */
-    H5G_t           *ret_value;         /* Return value */
+    H5G_t *ret_value = NULL;            /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -814,7 +783,7 @@ H5G_iterate(hid_t loc_id, const char *group_name,
     hid_t gid = -1;             /* ID of group to iterate over */
     H5G_t *grp = NULL;          /* Pointer to group data structure to iterate over */
     H5G_iter_appcall_ud_t udata; /* User data for callback */
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1084,7 +1053,7 @@ H5G_visit(hid_t loc_id, const char *group_name, H5_index_t idx_type,
     H5G_loc_t	loc;                /* Location of group passed in */
     H5G_loc_t	start_loc;          /* Location of starting group */
     unsigned    rc;		    /* Reference count of object    */
-    herr_t      ret_value;          /* Return value */
+    herr_t ret_value = FAIL;        /* Return value */
 
     /* Portably clear udata struct (before FUNC_ENTER) */
     HDmemset(&udata, 0, sizeof(udata));
diff --git a/src/H5Glink.c b/src/H5Glink.c
index 8b258b5..5a195c8 100644
--- a/src/H5Glink.c
+++ b/src/H5Glink.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -159,7 +159,7 @@ H5G_link_cmp_name_dec(const void *lnk1, const void *lnk2)
 static int
 H5G_link_cmp_corder_inc(const void *lnk1, const void *lnk2)
 {
-    int ret_value;              /* Return value */
+    int ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -194,7 +194,7 @@ H5G_link_cmp_corder_inc(const void *lnk1, const void *lnk2)
 static int
 H5G_link_cmp_corder_dec(const void *lnk1, const void *lnk2)
 {
-    int ret_value;              /* Return value */
+    int ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Gloc.c b/src/H5Gloc.c
index 677cc25..eb8cd78 100644
--- a/src/H5Gloc.c
+++ b/src/H5Gloc.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -649,7 +649,7 @@ htri_t
 H5G_loc_exists(const H5G_loc_t *loc, const char *name, hid_t lapl_id, hid_t dxpl_id)
 {
     H5G_loc_exists_t udata;     /* User data for traversal callback */
-    htri_t ret_value;           /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -913,7 +913,7 @@ H5G_loc_get_comment(H5G_loc_t *loc, const char *name, char *comment/*out*/,
     size_t bufsize, hid_t lapl_id, hid_t dxpl_id)
 {
     H5G_loc_gc_t udata;         /* User data for traversal callback */
-    ssize_t ret_value;          /* Return value */
+    ssize_t ret_value = -1;     /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5Gmodule.h b/src/H5Gmodule.h
new file mode 100644
index 0000000..52ac067
--- /dev/null
+++ b/src/H5Gmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5G package.  Including this header means that the source file
+ *		is part of the H5G package.
+ */
+#ifndef _H5Gmodule_H
+#define _H5Gmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5G_MODULE
+#define H5_MY_PKG       H5G
+#define H5_MY_PKG_ERR   H5E_SYM
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Gmodule_H */
+
diff --git a/src/H5Gname.c b/src/H5Gname.c
index bbeddb6..aff9d31 100644
--- a/src/H5Gname.c
+++ b/src/H5Gname.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -166,7 +166,7 @@ H5G_normalize(const char *name)
     char *norm;         /* Pointer to the normalized string */
     size_t	s,d;    /* Positions within the strings */
     unsigned    last_slash;     /* Flag to indicate last character was a slash */
-    char *ret_value;    /* Return value */
+    char *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -297,7 +297,7 @@ H5G_build_fullpath(const char *prefix, const char *name)
     size_t path_len;            /* Length of the path */
     size_t name_len;            /* Length of the name */
     unsigned need_sep;          /* Flag to indicate if separator is needed */
-    H5RS_str_t *ret_value;      /* Return value */
+    H5RS_str_t *ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -354,7 +354,7 @@ H5RS_str_t *
 H5G_build_fullpath_refstr_str(H5RS_str_t *prefix_r, const char *name)
 {
     const char *prefix;         /* Pointer to raw string for path */
-    H5RS_str_t *ret_value;
+    H5RS_str_t *ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -565,7 +565,7 @@ H5G_get_name(const H5G_loc_t *loc, char *name/*out*/, size_t size,
     hbool_t *cached, hid_t lapl_id, hid_t dxpl_id)
 {
     ssize_t len = 0;            /* Length of object's name */
-    ssize_t ret_value;          /* Return value */
+    ssize_t ret_value = -1;     /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1292,7 +1292,7 @@ H5G_get_name_by_addr(hid_t file, hid_t lapl_id, hid_t dxpl_id, const H5O_loc_t *
     H5G_loc_t root_loc;         /* Root group's location */
     hbool_t found_obj = FALSE;  /* If we found the object */
     herr_t status;              /* Status from iteration */
-    ssize_t ret_value;          /* Return value */
+    ssize_t ret_value = -1;     /* Return value */
 
     /* Portably clear udata struct (before FUNC_ENTER) */
     HDmemset(&udata, 0, sizeof(udata));
diff --git a/src/H5Gnode.c b/src/H5Gnode.c
index cbb9a8e..e25a17e 100644
--- a/src/H5Gnode.c
+++ b/src/H5Gnode.c
@@ -31,7 +31,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg   */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -404,7 +404,7 @@ H5G_node_cmp2(void *_lt_key, void *_udata, void *_rt_key)
     H5G_node_key_t	   *rt_key = (H5G_node_key_t *) _rt_key;
     const char		   *s1, *s2;
     const char		   *base;           /* Base of heap */
-    int		           ret_value;
+    int		           ret_value = -1;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Gobj.c b/src/H5Gobj.c
index c1f05b7..f7782a6 100644
--- a/src/H5Gobj.c
+++ b/src/H5Gobj.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -156,7 +156,7 @@ H5G__obj_create(H5F_t *f, hid_t dxpl_id, H5G_obj_create_t *gcrt_info,
         HGOTO_ERROR(H5E_SYM, H5E_CANTGET, FAIL, "can't get group info")
 
     /* Get the pipeline property */
-    if(H5P_get(gc_plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(gc_plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_SYM, H5E_CANTGET, FAIL, "can't get group info")
 
     /* Call the "real" group creation routine now */
@@ -320,8 +320,8 @@ done:
 htri_t
 H5G__obj_get_linfo(const H5O_loc_t *grp_oloc, H5O_linfo_t *linfo, hid_t dxpl_id)
 {
-    H5B2_t *bt2_name = NULL;            /* v2 B-tree handle for name index */
-    htri_t ret_value;           /* Return value */
+    H5B2_t *bt2_name = NULL;    /* v2 B-tree handle for name index */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_PACKAGE_TAG(dxpl_id, grp_oloc->addr, FAIL)
 
@@ -666,7 +666,7 @@ H5G__obj_iterate(const H5O_loc_t *grp_oloc,
 {
     H5O_linfo_t	linfo;		/* Link info message */
     htri_t linfo_exists;        /* Whether the link info message exists */
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_PACKAGE_TAG(dxpl_id, grp_oloc->addr, FAIL)
 
@@ -813,7 +813,7 @@ H5G_obj_get_name_by_idx(const H5O_loc_t *oloc, H5_index_t idx_type,
 {
     H5O_linfo_t	linfo;		/* Link info message */
     htri_t linfo_exists;        /* Whether the link info message exists */
-    ssize_t ret_value;          /* Return value */
+    ssize_t ret_value = -1;     /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, oloc->addr, FAIL)
 
diff --git a/src/H5Goh.c b/src/H5Goh.c
index 1a0f112..c516713 100644
--- a/src/H5Goh.c
+++ b/src/H5Goh.c
@@ -17,8 +17,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
 
 
 /***********/
@@ -107,7 +107,7 @@ H5FL_DEFINE(H5G_copy_file_ud_t);
 static void *
 H5O_group_get_copy_file_udata(void)
 {
-    void *ret_value;       /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -177,7 +177,7 @@ H5O_group_isa(struct H5O_t *oh)
 {
     htri_t	stab_exists;            /* Whether the 'stab' message is in the object header */
     htri_t	linfo_exists;           /* Whether the 'linfo' message is in the object header */
-    htri_t	ret_value;              /* Return value */
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -213,7 +213,7 @@ static hid_t
 H5O_group_open(const H5G_loc_t *obj_loc, hid_t H5_ATTR_UNUSED lapl_id, hid_t dxpl_id, hbool_t app_ref)
 {
     H5G_t       *grp = NULL;            /* Group opened */
-    hid_t	ret_value;              /* Return value */
+    hid_t	ret_value = H5I_INVALID_HID;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -254,7 +254,7 @@ H5O_group_create(H5F_t *f, void *_crt_info, H5G_loc_t *obj_loc, hid_t dxpl_id)
 {
     H5G_obj_create_t *crt_info = (H5G_obj_create_t *)_crt_info; /* Group creation parameters */
     H5G_t *grp = NULL;          /* New group created */
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -302,7 +302,7 @@ static H5O_loc_t *
 H5O_group_get_oloc(hid_t obj_id)
 {
     H5G_t       *grp;                   /* Group opened */
-    H5O_loc_t	*ret_value;             /* Return value */
+    H5O_loc_t	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Gpkg.h b/src/H5Gpkg.h
index 7346b41..1457e62 100644
--- a/src/H5Gpkg.h
+++ b/src/H5Gpkg.h
@@ -21,7 +21,7 @@
  *              only within the H5G package. Source files outside the
  *              H5G package should include H5Gprivate.h instead.
  */
-#ifndef H5G_PACKAGE
+#if !(defined H5G_FRIEND || defined H5G_MODULE)
 #error "Do not include this file outside the H5G package!"
 #endif
 
@@ -351,8 +351,6 @@ H5_DLL herr_t H5G__traverse_special(const H5G_loc_t *grp_loc,
 /*
  * Utility functions
  */
-H5_DLL herr_t H5G__init(void);
-H5_DLL herr_t H5G__term_deprec_interface(void);
 H5_DLL const char *H5G__component(const char *name, size_t *size_p);
 
 /*
diff --git a/src/H5Gprivate.h b/src/H5Gprivate.h
index 130c742..baf4209 100644
--- a/src/H5Gprivate.h
+++ b/src/H5Gprivate.h
@@ -101,11 +101,11 @@
                                                 }
 
 /* If the module using this macro is allowed access to the private variables, access them directly */
-#ifdef H5G_PACKAGE
+#ifdef H5G_MODULE
 #define H5G_MOUNTED(G)              ((G)->shared->mounted)
-#else /* H5G_PACKAGE */
+#else /* H5G_MODULE */
 #define H5G_MOUNTED(G)              (H5G_mounted(G))
-#endif /* H5G_PACKAGE */
+#endif /* H5G_MODULE */
 
 /*
  * During name lookups (see H5G_traverse()) we sometimes want information about
diff --git a/src/H5Groot.c b/src/H5Groot.c
index 5ec9d3a..ba25f31 100644
--- a/src/H5Groot.c
+++ b/src/H5Groot.c
@@ -28,8 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg  */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
diff --git a/src/H5Gstab.c b/src/H5Gstab.c
index 08188ae..7f4b8df 100644
--- a/src/H5Gstab.c
+++ b/src/H5Gstab.c
@@ -22,7 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
@@ -533,7 +533,7 @@ H5G__stab_iterate(const H5O_loc_t *oloc, hid_t dxpl_id, H5_iter_order_t order,
     H5HL_t *heap = NULL;                        /* Local heap for group */
     H5O_stab_t stab;		                /* Info about symbol table */
     H5G_link_table_t ltable = {0, NULL};        /* Link table */
-    herr_t ret_value;                           /* Return value */
+    herr_t ret_value = FAIL;                    /* Return value */
 
     FUNC_ENTER_PACKAGE_TAG(dxpl_id, oloc->addr, FAIL)
 
@@ -751,7 +751,7 @@ H5G__stab_get_name_by_idx(const H5O_loc_t *oloc, H5_iter_order_t order, hsize_t
     H5O_stab_t	stab;	        /* Info about local heap & B-tree */
     H5G_bt_it_gnbi_t udata;     /* Iteration information */
     hbool_t udata_valid = FALSE;        /* Whether iteration information is valid */
-    ssize_t ret_value;          /* Return value */
+    ssize_t ret_value = -1;             /* Return value */
 
     /* Portably clear udata struct (before FUNC_ENTER) */
     HDmemset(&udata, 0, sizeof(udata));
@@ -874,7 +874,7 @@ H5G__stab_lookup(const H5O_loc_t *grp_oloc, const char *name, H5O_link_t *lnk,
     H5G_bt_lkp_t bt_udata;              /* Data to pass through B-tree	*/
     H5G_stab_fnd_ud_t udata;            /* 'User data' to give to callback */
     H5O_stab_t stab;		        /* Symbol table message		*/
-    htri_t     ret_value;       /* Return value */
+    htri_t     ret_value = FAIL;        /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -1191,7 +1191,7 @@ H5G__stab_get_type_by_idx(H5O_loc_t *oloc, hsize_t idx, hid_t dxpl_id)
 {
     H5O_stab_t		stab;	        /* Info about local heap & B-tree */
     H5G_bt_it_gtbi_t	udata;          /* User data for B-tree callback */
-    H5G_obj_t		ret_value;      /* Return value */
+    H5G_obj_t		ret_value = H5G_UNKNOWN;        /* Return value */
 
     FUNC_ENTER_PACKAGE_TAG(dxpl_id, oloc->addr, H5G_UNKNOWN)
 
diff --git a/src/H5Gtest.c b/src/H5Gtest.c
index 1c0adea..a8796fb 100644
--- a/src/H5Gtest.c
+++ b/src/H5Gtest.c
@@ -23,7 +23,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 #define H5G_TESTING		/*suppress warning about H5G testing funcs*/
 
 
diff --git a/src/H5Gtraverse.c b/src/H5Gtraverse.c
index 1c654bb..5121f45 100644
--- a/src/H5Gtraverse.c
+++ b/src/H5Gtraverse.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#include "H5Gmodule.h"          /* This source code file is part of the H5G module */
 
 
 /***********/
diff --git a/src/H5HF.c b/src/H5HF.c
index 4a0ad07..efd57ae 100644
--- a/src/H5HF.c
+++ b/src/H5HF.c
@@ -33,7 +33,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
@@ -68,6 +69,9 @@
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -153,7 +157,7 @@ H5HF_create(H5F_t *f, hid_t dxpl_id, const H5HF_create_t *cparam)
     H5HF_t *fh = NULL;          /* Pointer to new fractal heap */
     H5HF_hdr_t *hdr = NULL;     /* The fractal heap header information */
     haddr_t fh_addr;            /* Heap header address */
-    H5HF_t *ret_value;          /* Return value */
+    H5HF_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -220,7 +224,7 @@ H5HF_open(H5F_t *f, hid_t dxpl_id, haddr_t fh_addr)
 {
     H5HF_t *fh = NULL;          /* Pointer to new fractal heap */
     H5HF_hdr_t *hdr = NULL;     /* The fractal heap header information */
-    H5HF_t *ret_value;          /* Return value */
+    H5HF_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
diff --git a/src/H5HFbtree2.c b/src/H5HFbtree2.c
index cb1ec77..2f3d0e4 100644
--- a/src/H5HFbtree2.c
+++ b/src/H5HFbtree2.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
 
 
 /***********/
@@ -196,7 +196,7 @@ H5HF_huge_bt2_crt_context(void *_f)
 {
     H5F_t *f = (H5F_t *)_f;     /* User data for building callback context */
     H5HF_huge_bt2_ctx_t *ctx;   /* Callback context structure */
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -762,7 +762,7 @@ H5HF_huge_bt2_dir_compare(const void *_rec1, const void *_rec2)
 {
     const H5HF_huge_bt2_dir_rec_t *rec1 = (const H5HF_huge_bt2_dir_rec_t *)_rec1;
     const H5HF_huge_bt2_dir_rec_t *rec2 = (const H5HF_huge_bt2_dir_rec_t *)_rec2;
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -985,7 +985,7 @@ H5HF_huge_bt2_filt_dir_compare(const void *_rec1, const void *_rec2)
 {
     const H5HF_huge_bt2_filt_dir_rec_t *rec1 = (const H5HF_huge_bt2_filt_dir_rec_t *)_rec1;
     const H5HF_huge_bt2_filt_dir_rec_t *rec2 = (const H5HF_huge_bt2_filt_dir_rec_t *)_rec2;
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5HFcache.c b/src/H5HFcache.c
index ec8d9a6..4f3dfc3 100644
--- a/src/H5HFcache.c
+++ b/src/H5HFcache.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
 
 
 /***********/
@@ -401,7 +401,7 @@ H5HF__cache_hdr_deserialize(const void *_image, size_t len, void *_udata,
     uint32_t            stored_chksum;  /* Stored metadata checksum value */
     uint32_t            computed_chksum; /* Computed metadata checksum value */
     uint8_t             heap_flags;     /* Status flags for heap */
-    void *              ret_value;      /* Return value */
+    void *              ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -905,7 +905,7 @@ H5HF__cache_iblock_deserialize(const void *_image, size_t len, void *_udata,
     uint32_t            stored_chksum;  /* Stored metadata checksum value */
     uint32_t            computed_chksum; /* Computed metadata checksum value */
     unsigned            u;              /* Local index variable */
-    void *              ret_value;      /* Return value */
+    void *              ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -1590,7 +1590,7 @@ H5HF__cache_dblock_deserialize(const void *_image, size_t len, void *_udata,
     H5HF_direct_t       *dblock = NULL; /* Direct block info */
     const uint8_t       *image;         /* Pointer into raw data buffer */
     haddr_t             heap_addr;      /* Address of heap header in the file */
-    void *              ret_value;      /* Return value */
+    void *              ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -1924,7 +1924,7 @@ H5HF__cache_dblock_pre_serialize(const H5F_t *f, hid_t dxpl_id, void *_thing,
     H5HF_hdr_t          *hdr;           /* Shared fractal heap information */
     H5HF_direct_t       *dblock = (H5HF_direct_t *)_thing;      /* Direct block info */
     H5HF_indirect_t 	*par_iblock;    /* Parent indirect block */
-    unsigned		 par_entry;     /* Entry in parent indirect block */
+    unsigned		 par_entry = 0;     /* Entry in parent indirect block */
     void 		*write_buf;     /* Pointer to buffer to write out */
     size_t 		 write_size;    /* Size of buffer to write out */
     uint8_t 		*image;         /* Pointer into raw data buffer */
@@ -2224,6 +2224,7 @@ H5HF__cache_dblock_pre_serialize(const H5F_t *f, hid_t dxpl_id, void *_thing,
             else { /* the direct block's parent is an indirect block */
                 /* Sanity check */
                 HDassert(par_iblock);
+                HDassert(par_iblock->ents);
                 HDassert(H5F_addr_eq(par_iblock->ents[par_entry].addr, addr));
 
                 /* Allocate 'normal' space for the direct block */
diff --git a/src/H5HFdbg.c b/src/H5HFdbg.c
index 736b98d..40191e5 100644
--- a/src/H5HFdbg.c
+++ b/src/H5HFdbg.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
 #define H5HF_DEBUGGING          /* Need access to fractal heap debugging routines */
 
 /***********/
diff --git a/src/H5HFdblock.c b/src/H5HFdblock.c
index 5dd5b0c..9461fc0 100644
--- a/src/H5HFdblock.c
+++ b/src/H5HFdblock.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
@@ -447,7 +448,7 @@ H5HF_man_dblock_protect(H5HF_hdr_t *hdr, hid_t dxpl_id, haddr_t dblock_addr,
 {
     H5HF_direct_t *dblock;      /* Direct block from cache */
     H5HF_dblock_cache_ud_t udata;	/* parent and other infor for deserializing direct block */
-    H5HF_direct_t *ret_value;   /* Return value */
+    H5HF_direct_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5HFdtable.c b/src/H5HFdtable.c
index c523396..3ceb6f5 100644
--- a/src/H5HFdtable.c
+++ b/src/H5HFdtable.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
@@ -240,7 +241,7 @@ H5HF_dtable_dest(H5HF_dtable_t *dtable)
 unsigned
 H5HF_dtable_size_to_row(const H5HF_dtable_t *dtable, size_t block_size)
 {
-    unsigned row;               /* Row where block will fit */
+    unsigned row = 0;   /* Row where block will fit */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -274,7 +275,7 @@ H5HF_dtable_size_to_row(const H5HF_dtable_t *dtable, size_t block_size)
 unsigned
 H5HF_dtable_size_to_rows(const H5HF_dtable_t *dtable, hsize_t size)
 {
-    unsigned rows;              /* # of rows required for indirect block */
+    unsigned rows = 0;          /* # of rows required for indirect block */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -310,7 +311,7 @@ H5HF_dtable_span_size(const H5HF_dtable_t *dtable, unsigned start_row,
     unsigned end_row;           /* Row for last block covered */
     unsigned end_col;           /* Column for last block covered */
     unsigned end_entry;         /* Entry for last block covered */
-    hsize_t acc_span_size;      /* Accumulated span size */
+    hsize_t acc_span_size = 0;  /* Accumulated span size */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5HFhdr.c b/src/H5HFhdr.c
index 340940f..6560756 100644
--- a/src/H5HFhdr.c
+++ b/src/H5HFhdr.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
@@ -110,7 +111,7 @@ H5HF_hdr_t *
 H5HF_hdr_alloc(H5F_t *f)
 {
     H5HF_hdr_t *hdr = NULL;          /* Shared fractal heap header */
-    H5HF_hdr_t *ret_value;              /* Return value */
+    H5HF_hdr_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -342,7 +343,7 @@ H5HF_hdr_create(H5F_t *f, hid_t dxpl_id, const H5HF_create_t *cparam)
 {
     H5HF_hdr_t *hdr = NULL;     /* The new fractal heap header information */
     size_t dblock_overhead;     /* Direct block's overhead */
-    haddr_t ret_value;          /* Return value */
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -533,7 +534,7 @@ H5HF_hdr_protect(H5F_t *f, hid_t dxpl_id, haddr_t addr, unsigned flags)
 {
     H5HF_hdr_cache_ud_t cache_udata;    /* User-data for callback */
     H5HF_hdr_t *hdr;                    /* Fractal heap header */
-    H5HF_hdr_t *ret_value;              /* Return value */
+    H5HF_hdr_t *ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5HFhuge.c b/src/H5HFhuge.c
index 04cd425..888af48 100644
--- a/src/H5HFhuge.c
+++ b/src/H5HFhuge.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
 
 
 /***********/
@@ -261,7 +261,7 @@ static hsize_t
 H5HF_huge_new_id(H5HF_hdr_t *hdr)
 {
     hsize_t new_id;             /* New object's ID */
-    hsize_t ret_value;          /* Return value */
+    hsize_t ret_value = 0;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5HFiblock.c b/src/H5HFiblock.c
index 547aaf0..29f4662 100644
--- a/src/H5HFiblock.c
+++ b/src/H5HFiblock.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
@@ -1171,7 +1172,7 @@ H5HF_man_iblock_protect(H5HF_hdr_t *hdr, hid_t dxpl_id, haddr_t iblock_addr,
     H5HF_parent_t par_info;             /* Parent info for loading block */
     H5HF_indirect_t *iblock = NULL;     /* Indirect block from cache */
     hbool_t should_protect = FALSE;     /* Whether we should protect the indirect block or not */
-    H5HF_indirect_t *ret_value;         /* Return value */
+    H5HF_indirect_t *ret_value = NULL;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5HFiter.c b/src/H5HFiter.c
index 262a9ee..55a8532 100644
--- a/src/H5HFiter.c
+++ b/src/H5HFiter.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
diff --git a/src/H5HFman.c b/src/H5HFman.c
index cfbcd87..cff4395 100644
--- a/src/H5HFman.c
+++ b/src/H5HFman.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
diff --git a/src/H5HFmodule.h b/src/H5HFmodule.h
new file mode 100644
index 0000000..e3274ce
--- /dev/null
+++ b/src/H5HFmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5HF package.  Including this header means that the source file
+ *		is part of the H5HF package.
+ */
+#ifndef _H5HFmodule_H
+#define _H5HFmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5HF_MODULE
+#define H5_MY_PKG       H5HF
+#define H5_MY_PKG_ERR   H5E_HEAP
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5HFmodule_H */
+
diff --git a/src/H5HFpkg.h b/src/H5HFpkg.h
index 685c83a..7a6794e 100644
--- a/src/H5HFpkg.h
+++ b/src/H5HFpkg.h
@@ -21,7 +21,7 @@
  *		the H5HF package.  Source files outside the H5HF package should
  *		include H5HFprivate.h instead.
  */
-#ifndef H5HF_PACKAGE
+#if !(defined H5HF_FRIEND || defined H5HF_MODULE)
 #error "Do not include this file outside the H5HF package!"
 #endif
 
diff --git a/src/H5HFsection.c b/src/H5HFsection.c
index c997119..070bc3e 100644
--- a/src/H5HFsection.c
+++ b/src/H5HFsection.c
@@ -25,7 +25,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
@@ -407,8 +408,8 @@ static H5HF_free_section_t *
 H5HF_sect_node_new(unsigned sect_type, haddr_t sect_addr, hsize_t sect_size,
     H5FS_section_state_t sect_state)
 {
-    H5HF_free_section_t *new_sect;      /* New section */
-    H5HF_free_section_t *ret_value;     /* Return value */
+    H5HF_free_section_t *new_sect;              /* New section */
+    H5HF_free_section_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -489,7 +490,7 @@ H5HF_sect_single_new(hsize_t sect_off, size_t sect_size,
     H5HF_indirect_t *parent, unsigned par_entry)
 {
     H5HF_free_section_t *sect = NULL;   /* 'Single' free space section to add */
-    H5HF_free_section_t *ret_value;     /* Return value */
+    H5HF_free_section_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -866,7 +867,7 @@ H5HF_sect_single_deserialize(const H5FS_section_class_t H5_ATTR_UNUSED *cls,
     hsize_t sect_size, unsigned H5_ATTR_UNUSED *des_flags)
 {
     H5HF_free_section_t *new_sect;      /* New section */
-    H5FS_section_info_t *ret_value;     /* Return value */
+    H5FS_section_info_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1261,7 +1262,7 @@ H5HF_sect_row_create(haddr_t sect_off, hsize_t sect_size, hbool_t is_first,
     unsigned row, unsigned col, unsigned nentries, H5HF_free_section_t *under_sect)
 {
     H5HF_free_section_t *sect = NULL;   /* 'Row' section created */
-    H5HF_free_section_t *ret_value;     /* Return value */
+    H5HF_free_section_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1513,7 +1514,7 @@ done:
 H5HF_indirect_t *
 H5HF_sect_row_get_iblock(H5HF_free_section_t *sect)
 {
-    H5HF_indirect_t *ret_value;         /* Return value */
+    H5HF_indirect_t *ret_value = NULL;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1675,7 +1676,7 @@ H5HF_sect_row_deserialize(const H5FS_section_class_t *cls, hid_t dxpl_id,
     unsigned *des_flags)
 {
     H5HF_hdr_t *hdr;                    /* Fractal heap header */
-    H5FS_section_info_t *ret_value;     /* Return value */
+    H5FS_section_info_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -2102,7 +2103,7 @@ H5HF_sect_row_debug(const H5FS_section_info_t *_sect,
 static hsize_t
 H5HF_sect_indirect_iblock_off(const H5HF_free_section_t *sect)
 {
-    hsize_t ret_value;           /* Return value */
+    hsize_t ret_value = 0;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -2133,7 +2134,7 @@ H5HF_sect_indirect_iblock_off(const H5HF_free_section_t *sect)
 static H5HF_free_section_t *
 H5HF_sect_indirect_top(H5HF_free_section_t *sect)
 {
-    H5HF_free_section_t *ret_value;           /* Return value */
+    H5HF_free_section_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -2242,7 +2243,7 @@ H5HF_sect_indirect_new(H5HF_hdr_t *hdr, haddr_t sect_off, hsize_t sect_size,
     unsigned nentries)
 {
     H5HF_free_section_t *sect = NULL;   /* 'Indirect' free space section to add */
-    H5HF_free_section_t *ret_value;     /* Return value */
+    H5HF_free_section_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -2313,7 +2314,7 @@ H5HF_sect_indirect_for_row(H5HF_hdr_t *hdr, H5HF_indirect_t *iblock,
     H5HF_free_section_t *row_sect)
 {
     H5HF_free_section_t *sect = NULL;   /* 'Indirect' free space section to add */
-    H5HF_free_section_t *ret_value;     /* Return value */
+    H5HF_free_section_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -3945,7 +3946,7 @@ H5HF_sect_indirect_deserialize(H5HF_hdr_t *hdr, hid_t dxpl_id,
     unsigned end_entry;                 /* End entry in indirect block */
     unsigned end_row;                   /* End row in indirect block */
     unsigned end_col;                   /* End column in indirect block */
-    H5FS_section_info_t *ret_value;     /* Return value */
+    H5FS_section_info_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5HFspace.c b/src/H5HFspace.c
index 7fb0dd4..20057e4 100644
--- a/src/H5HFspace.c
+++ b/src/H5HFspace.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
@@ -216,7 +217,7 @@ htri_t
 H5HF_space_find(H5HF_hdr_t *hdr, hid_t dxpl_id, hsize_t request, H5HF_free_section_t **node)
 {
     htri_t node_found = FALSE;  /* Whether an existing free list node was found */
-    htri_t ret_value;           /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5HFstat.c b/src/H5HFstat.c
index b0e1987..303b1f4 100644
--- a/src/H5HFstat.c
+++ b/src/H5HFstat.c
@@ -24,7 +24,8 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
+
 
 /***********/
 /* Headers */
diff --git a/src/H5HFtest.c b/src/H5HFtest.c
index c2e9cb0..4ec7149 100644
--- a/src/H5HFtest.c
+++ b/src/H5HFtest.c
@@ -24,9 +24,10 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE		/*suppress error about including H5HFpkg  */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
 #define H5HF_TESTING		/*suppress warning about H5HF testing funcs*/
 
+
 /***********/
 /* Headers */
 /***********/
@@ -244,7 +245,7 @@ done:
 unsigned
 H5HF_get_max_root_rows(const H5HF_t *fh)
 {
-    unsigned	ret_value;              /* Return value */
+    unsigned	ret_value = 0;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -275,7 +276,7 @@ H5HF_get_max_root_rows(const H5HF_t *fh)
 unsigned
 H5HF_get_dtable_width_test(const H5HF_t *fh)
 {
-    unsigned	ret_value;              /* Return value */
+    unsigned	ret_value = 0;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -306,7 +307,7 @@ H5HF_get_dtable_width_test(const H5HF_t *fh)
 unsigned
 H5HF_get_dtable_max_drows_test(const H5HF_t *fh)
 {
-    unsigned	ret_value;              /* Return value */
+    unsigned	ret_value = 0;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -341,7 +342,7 @@ H5HF_get_dtable_max_drows_test(const H5HF_t *fh)
 unsigned
 H5HF_get_iblock_max_drows_test(const H5HF_t *fh, unsigned pos)
 {
-    unsigned	ret_value;              /* Return value */
+    unsigned	ret_value = 0;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -374,7 +375,7 @@ H5HF_get_iblock_max_drows_test(const H5HF_t *fh, unsigned pos)
 hsize_t
 H5HF_get_dblock_size_test(const H5HF_t *fh, unsigned row)
 {
-    hsize_t	ret_value;              /* Return value */
+    hsize_t	ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -406,7 +407,7 @@ H5HF_get_dblock_size_test(const H5HF_t *fh, unsigned row)
 hsize_t
 H5HF_get_dblock_free_test(const H5HF_t *fh, unsigned row)
 {
-    hsize_t	ret_value;              /* Return value */
+    hsize_t	ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5HFtiny.c b/src/H5HFtiny.c
index 27ab443..8c321bc 100644
--- a/src/H5HFtiny.c
+++ b/src/H5HFtiny.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HF_PACKAGE        /* suppress error about including H5HFpkg */
+#include "H5HFmodule.h"         /* This source code file is part of the H5HF module */
 
 
 /***********/
diff --git a/src/H5HG.c b/src/H5HG.c
index 4b2eb78..57a1cf2 100644
--- a/src/H5HG.c
+++ b/src/H5HG.c
@@ -41,7 +41,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HG_PACKAGE		/*suppress error about including H5HGpkg	  */
+#include "H5HGmodule.h"         /* This source code file is part of the H5HG module */
 
 
 /***********/
@@ -91,6 +91,9 @@ static haddr_t H5HG_create(H5F_t *f, hid_t dxpl_id, size_t size);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Declare a free list to manage the H5HG_heap_t struct */
 H5FL_DEFINE(H5HG_heap_t);
 
@@ -249,7 +252,7 @@ H5HG_heap_t *
 H5HG_protect(H5F_t *f, hid_t dxpl_id, haddr_t addr, unsigned flags)
 {
     H5HG_heap_t *heap;          /* Global heap */
-    H5HG_heap_t *ret_value;     /* Return value */
+    H5HG_heap_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -299,7 +302,7 @@ H5HG_alloc(H5F_t *f, H5HG_heap_t *heap, size_t size, unsigned *heap_flags_ptr)
     size_t	idx;
     uint8_t	*p;
     size_t	need = H5HG_SIZEOF_OBJHDR(f) + H5HG_ALIGN(size);
-    size_t      ret_value;         /* Return value */
+    size_t      ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -612,7 +615,7 @@ H5HG_read(H5F_t *f, hid_t dxpl_id, H5HG_t *hobj, void *object/*out*/,
     size_t	size;                   /* Size of the heap object */
     uint8_t	*p;                     /* Pointer to object in heap buffer */
     void        *orig_object = object;  /* Keep a copy of the original object pointer */
-    void	*ret_value;             /* Return value */
+    void	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, H5AC__GLOBALHEAP_TAG, NULL)
 
@@ -684,7 +687,7 @@ H5HG_link(H5F_t *f, hid_t dxpl_id, const H5HG_t *hobj, int adjust)
 {
     H5HG_heap_t *heap = NULL;
     unsigned heap_flags = H5AC__NO_FLAGS_SET;
-    int ret_value;              /* Return value */
+    int ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, H5AC__GLOBALHEAP_TAG, FAIL)
 
diff --git a/src/H5HGcache.c b/src/H5HGcache.c
index 5c6bee1..c1eb8d9 100644
--- a/src/H5HGcache.c
+++ b/src/H5HGcache.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HG_PACKAGE		/*suppress error about including H5HGpkg  */
+#include "H5HGmodule.h"         /* This source code file is part of the H5HG module */
 
 
 /***********/
@@ -161,7 +161,7 @@ H5HG__cache_heap_deserialize(const void *_image, size_t len, void *_udata,
     H5F_t       *f = (H5F_t *)_udata;   /* File pointer -- obtained from user data */
     H5HG_heap_t *heap = NULL;   /* New global heap */
     uint8_t     *image;         /* Pointer to image to decode */
-    void        *ret_value;     /* Return value */
+    void        *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5HGdbg.c b/src/H5HGdbg.c
index c79aac8..6013de5 100644
--- a/src/H5HGdbg.c
+++ b/src/H5HGdbg.c
@@ -23,7 +23,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HG_PACKAGE		/*suppress error about including H5HGpkg	  */
+#include "H5HGmodule.h"         /* This source code file is part of the H5HG module */
 
 
 /***********/
diff --git a/src/H5HGmodule.h b/src/H5HGmodule.h
new file mode 100644
index 0000000..aa34f29
--- /dev/null
+++ b/src/H5HGmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5HG package.  Including this header means that the source file
+ *		is part of the H5HG package.
+ */
+#ifndef _H5HGmodule_H
+#define _H5HGmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5HG_MODULE
+#define H5_MY_PKG       H5HG
+#define H5_MY_PKG_ERR   H5E_HEAP
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5HGmodule_H */
+
diff --git a/src/H5HGpkg.h b/src/H5HGpkg.h
index 9137e7b..ffbf7c6 100644
--- a/src/H5HGpkg.h
+++ b/src/H5HGpkg.h
@@ -21,7 +21,7 @@
  *              only within the H5HG package. Source files outside the
  *              H5HG package should include H5HGprivate.h instead.
  */
-#ifndef H5HG_PACKAGE
+#if !(defined H5HG_FRIEND || defined H5HG_MODULE)
 #error "Do not include this file outside the H5HG package!"
 #endif
 
diff --git a/src/H5HGprivate.h b/src/H5HGprivate.h
index ad0da76..0c0aa69 100644
--- a/src/H5HGprivate.h
+++ b/src/H5HGprivate.h
@@ -44,15 +44,15 @@ typedef struct H5HG_heap_t H5HG_heap_t;
 #define H5HG_MAXSIZE	65536
 
 /* If the module using this macro is allowed access to the private variables, access them directly */
-#ifdef H5HG_PACKAGE
+#ifdef H5HG_MODULE
 #define H5HG_ADDR(H)            ((H)->addr)
 #define H5HG_SIZE(H)            ((H)->size)
 #define H5HG_FREE_SIZE(H)       ((H)->obj[0].size)
-#else /* H5HG_PACKAGE */
+#else /* H5HG_MODULE */
 #define H5HG_ADDR(H)            (H5HG_get_addr(H))
 #define H5HG_SIZE(H)            (H5HG_get_size(H))
 #define H5HG_FREE_SIZE(H)       (H5HG_get_free_size(H))
-#endif /* H5HG_PACKAGE */
+#endif /* H5HG_MODULE */
 
 
 /* Main global heap routines */
diff --git a/src/H5HGquery.c b/src/H5HGquery.c
index a1b3777..d07edcc 100644
--- a/src/H5HGquery.c
+++ b/src/H5HGquery.c
@@ -25,7 +25,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HG_PACKAGE		/*suppress error about including H5HGpkg	  */
+#include "H5HGmodule.h"         /* This source code file is part of the H5HG module */
 
 
 /***********/
diff --git a/src/H5HL.c b/src/H5HL.c
index 49af528..80603dd 100644
--- a/src/H5HL.c
+++ b/src/H5HL.c
@@ -29,7 +29,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HL_PACKAGE		/* Suppress error about including H5HLpkg */
+#include "H5HLmodule.h"         /* This source code file is part of the H5HL module */
 
 
 /***********/
@@ -71,6 +71,9 @@ static herr_t H5HL_minimize_heap_space(H5F_t *f, hid_t dxpl_id, H5HL_t *heap);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Declare a free list to manage the H5HL_free_t struct */
 H5FL_DEFINE(H5HL_free_t);
 
@@ -115,7 +118,7 @@ H5HL_create(H5F_t *f, hid_t dxpl_id, size_t size_hint, haddr_t *addr_p/*out*/)
 {
     H5HL_t	*heap = NULL;           /* Heap created */
     H5HL_prfx_t *prfx = NULL;           /* Heap prefix */
-    hsize_t	total_size;		/* Total heap size on disk	*/
+    hsize_t	total_size = 0;		/* Total heap size on disk */
     herr_t	ret_value = SUCCEED;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
@@ -446,10 +449,10 @@ H5HL_protect(H5F_t *f, hid_t dxpl_id, haddr_t addr, unsigned flags)
     H5HL_cache_prfx_ud_t prfx_udata; /* User data for protecting local heap prefix */
     H5HL_prfx_t *prfx = NULL;   /* Local heap prefix */
     H5HL_dblk_t *dblk = NULL;   /* Local heap data block */
-    H5HL_t *heap;               /* Heap data structure */
+    H5HL_t *heap = NULL;        /* Heap data structure */
     unsigned prfx_cache_flags = H5AC__NO_FLAGS_SET;         /* Cache flags for unprotecting prefix entry */
     unsigned dblk_cache_flags = H5AC__NO_FLAGS_SET;         /* Cache flags for unprotecting data block entry */
-    H5HL_t *ret_value;          /* Return value */
+    H5HL_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -511,11 +514,11 @@ H5HL_protect(H5F_t *f, hid_t dxpl_id, haddr_t addr, unsigned flags)
 
 done:
     /* Release the prefix from the cache, now pinned */
-    if(prfx && H5AC_unprotect(f, dxpl_id, H5AC_LHEAP_PRFX, heap->prfx_addr, prfx, prfx_cache_flags) < 0)
+    if(prfx && heap && H5AC_unprotect(f, dxpl_id, H5AC_LHEAP_PRFX, heap->prfx_addr, prfx, prfx_cache_flags) < 0)
         HDONE_ERROR(H5E_HEAP, H5E_CANTUNPROTECT, NULL, "unable to release local heap prefix")
 
     /* Release the data block from the cache, now pinned */
-    if(dblk && H5AC_unprotect(f, dxpl_id, H5AC_LHEAP_DBLK, heap->dblk_addr, dblk, dblk_cache_flags) < 0)
+    if(dblk && heap && H5AC_unprotect(f, dxpl_id, H5AC_LHEAP_DBLK, heap->dblk_addr, dblk, dblk_cache_flags) < 0)
         HDONE_ERROR(H5E_HEAP, H5E_CANTUNPROTECT, NULL, "unable to release local heap data block")
 
     FUNC_LEAVE_NOAPI(ret_value)
@@ -700,7 +703,7 @@ H5HL_insert(H5F_t *f, hid_t dxpl_id, H5HL_t *heap, size_t buf_size, const void *
     size_t	offset = 0;
     size_t	need_size;
     hbool_t	found;
-    size_t	ret_value;      /* Return value */
+    size_t	ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI(UFAIL)
 
@@ -1062,7 +1065,7 @@ done:
 herr_t
 H5HL_delete(H5F_t *f, hid_t dxpl_id, haddr_t addr)
 {
-    H5HL_t	*heap;                  /* Local heap to delete */
+    H5HL_t	*heap = NULL;           /* Local heap to delete */
     H5HL_cache_prfx_ud_t prfx_udata;    /* User data for protecting local heap prefix */
     H5HL_prfx_t *prfx = NULL;           /* Local heap prefix */
     H5HL_dblk_t *dblk = NULL;           /* Local heap data block */
@@ -1114,11 +1117,11 @@ H5HL_delete(H5F_t *f, hid_t dxpl_id, haddr_t addr)
 
 done:
     /* Release the data block from the cache, now deleted */
-    if(dblk && H5AC_unprotect(f, dxpl_id, H5AC_LHEAP_DBLK, heap->dblk_addr, dblk, cache_flags) < 0)
+    if(dblk && heap && H5AC_unprotect(f, dxpl_id, H5AC_LHEAP_DBLK, heap->dblk_addr, dblk, cache_flags) < 0)
         HDONE_ERROR(H5E_HEAP, H5E_CANTUNPROTECT, FAIL, "unable to release local heap data block")
 
     /* Release the prefix from the cache, now deleted */
-    if(prfx && H5AC_unprotect(f, dxpl_id, H5AC_LHEAP_PRFX, heap->prfx_addr, prfx, cache_flags) < 0)
+    if(prfx && heap && H5AC_unprotect(f, dxpl_id, H5AC_LHEAP_PRFX, heap->prfx_addr, prfx, cache_flags) < 0)
         HDONE_ERROR(H5E_HEAP, H5E_CANTUNPROTECT, FAIL, "unable to release local heap prefix")
 
     FUNC_LEAVE_NOAPI(ret_value)
diff --git a/src/H5HLcache.c b/src/H5HLcache.c
index 2054e34..42fe1c7 100644
--- a/src/H5HLcache.c
+++ b/src/H5HLcache.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HL_PACKAGE		/* Suppress error about including H5HLpkg */
+#include "H5HLmodule.h"         /* This source code file is part of the H5HL module */
 
 
 /***********/
@@ -311,7 +311,7 @@ H5HL__cache_prefix_deserialize(const void *_image, size_t len, void *_udata,
     H5HL_prfx_t          *prfx = NULL;  /* Heap prefix deserialized */
     const uint8_t        *image = (const uint8_t *)_image;      /* Pointer into decoding buffer */
     H5HL_cache_prfx_ud_t *udata = (H5HL_cache_prfx_ud_t *)_udata;       /* User data for callback */
-    void                 *ret_value;    /* Return value */
+    void                 *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -682,7 +682,7 @@ H5HL__cache_datablock_deserialize(const void *image, size_t len, void *_udata,
 {
     H5HL_dblk_t          *dblk = NULL;  /* Local heap data block deserialized */
     H5HL_cache_dblk_ud_t *udata = (H5HL_cache_dblk_ud_t *)_udata; /* User data for callback */
-    void *                ret_value;    /* Return value */
+    void                 *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5HLdbg.c b/src/H5HLdbg.c
index edddd65..3620511 100644
--- a/src/H5HLdbg.c
+++ b/src/H5HLdbg.c
@@ -18,7 +18,8 @@
  *
  * Purpose:	Local Heap object debugging functions.
  */
-#define H5HL_PACKAGE		/* Suppress error about including H5HLpkg */
+
+#include "H5HLmodule.h"         /* This source code file is part of the H5HL module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
diff --git a/src/H5HLint.c b/src/H5HLint.c
index d5238eb..bbf579d 100644
--- a/src/H5HLint.c
+++ b/src/H5HLint.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5HL_PACKAGE		/* Suppress error about including H5HLpkg */
+#include "H5HLmodule.h"         /* This source code file is part of the H5HL module */
 
 
 /***********/
@@ -102,7 +102,7 @@ H5HL_t *
 H5HL_new(size_t sizeof_size, size_t sizeof_addr, size_t prfx_size)
 {
     H5HL_t *heap = NULL;        /* New local heap */
-    H5HL_t *ret_value;          /* Return value */
+    H5HL_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -129,7 +129,7 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5HL_inc_rc
+ * Function:	H5HL__inc_rc
  *
  * Purpose:	Increment ref. count on heap
  *
@@ -143,9 +143,9 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5HL_inc_rc(H5HL_t *heap)
+H5HL__inc_rc(H5HL_t *heap)
 {
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* check arguments */
     HDassert(heap);
@@ -154,11 +154,11 @@ H5HL_inc_rc(H5HL_t *heap)
     heap->rc++;
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5HL_inc_rc() */
+} /* end H5HL__inc_rc() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5HL_dec_rc
+ * Function:	H5HL__dec_rc
  *
  * Purpose:	Decrement ref. count on heap
  *
@@ -172,9 +172,9 @@ H5HL_inc_rc(H5HL_t *heap)
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5HL_dec_rc(H5HL_t *heap)
+H5HL__dec_rc(H5HL_t *heap)
 {
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* check arguments */
     HDassert(heap);
@@ -187,7 +187,7 @@ H5HL_dec_rc(H5HL_t *heap)
         H5HL_dest(heap);
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5HL_dec_rc() */
+} /* end H5HL__dec_rc() */
 
 
 /*-------------------------------------------------------------------------
@@ -250,7 +250,7 @@ H5HL_prfx_t *
 H5HL_prfx_new(H5HL_t *heap)
 {
     H5HL_prfx_t *prfx = NULL;       /* New local heap prefix */
-    H5HL_prfx_t *ret_value;         /* Return value */
+    H5HL_prfx_t *ret_value = NULL;  /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -262,7 +262,7 @@ H5HL_prfx_new(H5HL_t *heap)
 	HGOTO_ERROR(H5E_HEAP, H5E_CANTALLOC, NULL, "memory allocation failed")
 
     /* Increment ref. count on heap data structure */
-    if(H5HL_inc_rc(heap) < 0)
+    if(H5HL__inc_rc(heap) < 0)
 	HGOTO_ERROR(H5E_HEAP, H5E_CANTINC, NULL, "can't increment heap ref. count")
 
     /* Link the heap & the prefix */
@@ -307,7 +307,7 @@ H5HL_prfx_dest(H5HL_prfx_t *prfx)
         prfx->heap->prfx = NULL;
 
         /* Decrement ref. count on heap data structure */
-        if(H5HL_dec_rc(prfx->heap) < 0)
+        if(H5HL__dec_rc(prfx->heap) < 0)
             HGOTO_ERROR(H5E_HEAP, H5E_CANTDEC, FAIL, "can't decrement heap ref. count")
 
         /* Unlink heap from prefix */
@@ -340,7 +340,7 @@ H5HL_dblk_t *
 H5HL_dblk_new(H5HL_t *heap)
 {
     H5HL_dblk_t *dblk = NULL;       /* New local heap data block */
-    H5HL_dblk_t *ret_value;         /* Return value */
+    H5HL_dblk_t *ret_value = NULL;  /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -352,7 +352,7 @@ H5HL_dblk_new(H5HL_t *heap)
 	HGOTO_ERROR(H5E_HEAP, H5E_CANTALLOC, NULL, "memory allocation failed")
 
     /* Increment ref. count on heap data structure */
-    if(H5HL_inc_rc(heap) < 0)
+    if(H5HL__inc_rc(heap) < 0)
 	HGOTO_ERROR(H5E_HEAP, H5E_CANTINC, NULL, "can't increment heap ref. count")
 
     /* Link the heap & the data block */
@@ -401,7 +401,7 @@ H5HL_dblk_dest(H5HL_dblk_t *dblk)
             HGOTO_ERROR(H5E_HEAP, H5E_CANTUNPIN, FAIL, "can't unpin local heap prefix")
 
         /* Decrement ref. count on heap data structure */
-        if(H5HL_dec_rc(dblk->heap) < 0)
+        if(H5HL__dec_rc(dblk->heap) < 0)
             HGOTO_ERROR(H5E_HEAP, H5E_CANTDEC, FAIL, "can't decrement heap ref. count")
 
         /* Unlink heap from data block */
diff --git a/src/H5HLmodule.h b/src/H5HLmodule.h
new file mode 100644
index 0000000..b38c077
--- /dev/null
+++ b/src/H5HLmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5HL package.  Including this header means that the source file
+ *		is part of the H5HL package.
+ */
+#ifndef _H5HLmodule_H
+#define _H5HLmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5HL_MODULE
+#define H5_MY_PKG       H5HL
+#define H5_MY_PKG_ERR   H5E_HEAP
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5HLmodule_H */
+
diff --git a/src/H5HLpkg.h b/src/H5HLpkg.h
index 75c9959..6e35add 100644
--- a/src/H5HLpkg.h
+++ b/src/H5HLpkg.h
@@ -21,7 +21,7 @@
  *              only within the H5HL package. Source files outside the
  *              H5HL package should include H5HLprivate.h instead.
  */
-#ifndef H5HL_PACKAGE
+#if !(defined H5HL_FRIEND || defined H5HL_MODULE)
 #error "Do not include this file outside the H5HL package!"
 #endif
 
diff --git a/src/H5I.c b/src/H5I.c
index 605fc9b..15db6d6 100644
--- a/src/H5I.c
+++ b/src/H5I.c
@@ -35,10 +35,7 @@
  *	5/18/04 - Expanded to allow registration of new types at run-time
  */
 
-#define H5I_PACKAGE		/*suppress error about including H5Ipkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5I_init_interface
+#include "H5Imodule.h"          /* This source code file is part of the H5I module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -55,7 +52,7 @@
 #ifndef H5I_DEBUG_OUTPUT
 #include "H5Gprivate.h"		/* Groups				*/
 #else /* H5I_DEBUG_OUTPUT */
-#define H5G_PACKAGE /*suppress error message about including H5Gpkg.h */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg	  */
 #include "H5Gpkg.h"		/* Groups		  		*/
 #include "H5Dprivate.h"		/* Datasets				*/
 #include "H5Tprivate.h"		/* Datatypes				*/
@@ -106,6 +103,9 @@ typedef struct {
     hbool_t app_ref;            /* Whether this is an appl. ref. call */
 } H5I_clear_type_ud_t;
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /*-------------------- Locally scoped variables -----------------------------*/
 
 /* Array of pointers to atomic types */
@@ -141,29 +141,8 @@ static herr_t H5I__debug(H5I_type_t type);
 #endif /* H5I_DEBUG_OUTPUT */
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5I_init_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5I_init_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.
-
---------------------------------------------------------------------------*/
-static herr_t
-H5I_init_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5I_init_interface() */
-
-
 /*-------------------------------------------------------------------------
- * Function:	H5I_term_interface
+ * Function:	H5I_term_package
  *
  * Purpose:	Terminate the H5I interface: release all memory, reset all
  *		global variables to initial values. This only happens if all
@@ -179,20 +158,20 @@ H5I_init_interface(void)
  *-------------------------------------------------------------------------
  */
 int
-H5I_term_interface(void)
+H5I_term_package(void)
 {
-    H5I_id_type_t	*type_ptr;
-    H5I_type_t		type;
-    int		n = 0;
+    int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5_PKG_INIT_VAR) {
+        H5I_id_type_t *type_ptr;        /* Pointer to ID type */
+        H5I_type_t type;                /* Type of ID */
+
         /* How many types are still being used? */
-        for(type = (H5I_type_t)0; type < H5I_next_type; H5_INC_ENUM(H5I_type_t, type)) {
+        for(type = (H5I_type_t)0; type < H5I_next_type; H5_INC_ENUM(H5I_type_t, type))
             if((type_ptr = H5I_id_type_list_g[type]) && type_ptr->ids)
                 n++;
-        } /* end for */
 
         /* If no types are used then clean up */
         if(0 == n) {
@@ -202,16 +181,18 @@ H5I_term_interface(void)
                     HDassert(NULL == type_ptr->ids);
                     type_ptr = H5FL_FREE(H5I_id_type_t, type_ptr);
                     H5I_id_type_list_g[type] = NULL;
+                    n++;
                 } /* end if */
             } /* end for */
-        } /* end if */
 
-        /* Mark interface closed */
-        H5_interface_initialize_g = 0;
+            /* Mark interface closed */
+            if(0 == n)
+                H5_PKG_INIT_VAR = FALSE;
+        } /* end if */
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5I_term_interface() */
+} /* end H5I_term_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -238,9 +219,9 @@ H5I_term_interface(void)
 H5I_type_t
 H5Iregister_type(size_t hash_size, unsigned reserved, H5I_free_t free_func)
 {
-    H5I_class_t *cls = NULL;    /* New ID class */
-    H5I_type_t new_type;        /* New ID type value */
-    H5I_type_t ret_value;       /* Return value */
+    H5I_class_t *cls = NULL;            /* New ID class */
+    H5I_type_t new_type;                /* New ID type value */
+    H5I_type_t ret_value = H5I_BADID;   /* Return value */
 
     FUNC_ENTER_API(H5I_BADID)
     H5TRACE3("It", "zIux", hash_size, reserved, free_func);
@@ -290,10 +271,9 @@ H5Iregister_type(size_t hash_size, unsigned reserved, H5I_free_t free_func)
 
 done:
     /* Clean up on error */
-    if(ret_value < 0) {
+    if(ret_value < 0)
         if(cls)
             cls = H5FL_FREE(H5I_class_t, cls);
-    } /* end if */
 
     FUNC_LEAVE_API(ret_value)
 } /* end H5Iregister_type() */
@@ -467,8 +447,8 @@ done:
 int64_t
 H5I_nmembers(H5I_type_t type)
 {
-    H5I_id_type_t	*type_ptr = NULL;
-    int64_t		    ret_value;
+    H5I_id_type_t *type_ptr;            /* Pointer to the ID type */
+    int64_t ret_value = 0;              /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -504,7 +484,7 @@ done:
 herr_t
 H5Iclear_type(H5I_type_t type, hbool_t force)
 {
-    herr_t ret_value;                      /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE2("e", "Itb", type, force);
@@ -625,7 +605,6 @@ H5I__clear_type_cb(void *_id, void H5_ATTR_UNUSED *key, void *_udata)
         } /* end if */
     } /* end if */
 
-
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5I__clear_type_cb() */
 
@@ -649,7 +628,7 @@ H5I__clear_type_cb(void *_id, void H5_ATTR_UNUSED *key, void *_udata)
 herr_t
 H5Idestroy_type(H5I_type_t type)
 {
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE1("e", "It", type);
@@ -731,7 +710,7 @@ done:
 hid_t
 H5Iregister(H5I_type_t type, const void *object)
 {
-    hid_t ret_value;                      /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;  /* Return value */
 
     FUNC_ENTER_API(H5I_INVALID_HID)
     H5TRACE2("i", "It*x", type, object);
@@ -826,8 +805,8 @@ done:
 void *
 H5I_subst(hid_t id, const void *new_object)
 {
-    H5I_id_info_t	*id_ptr;	/* Ptr to the atom	*/
-    void		*ret_value;	/* Return value		*/
+    H5I_id_info_t *id_ptr;      /* Pointer to the atom */
+    void *ret_value = NULL;	/* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -866,7 +845,7 @@ H5I_object(hid_t id)
     H5I_id_info_t	*id_ptr;		/*ptr to the new atom	*/
     void		*ret_value = NULL;	/*return value		*/
 
-    FUNC_ENTER_NOAPI(NULL)
+    FUNC_ENTER_NOAPI_NOERR
 
     /* General lookup of the ID */
     if(NULL != (id_ptr = H5I__find_id(id))) {
@@ -875,7 +854,6 @@ H5I_object(hid_t id)
         ret_value = (void *)id_ptr->obj_ptr;
     } /* end if */
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end if */
 
@@ -900,7 +878,7 @@ done:
 void *
 H5Iobject_verify(hid_t id, H5I_type_t id_type)
 {
-    void * ret_value;                      /* Return value */
+    void *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_API(NULL)
     H5TRACE2("*x", "iIt", id, id_type);
@@ -939,7 +917,7 @@ H5I_object_verify(hid_t id, H5I_type_t id_type)
     H5I_id_info_t	*id_ptr = NULL;		/*ptr to the new atom	*/
     void		*ret_value = NULL;	/*return value		*/
 
-    FUNC_ENTER_NOAPI(NULL)
+    FUNC_ENTER_NOAPI_NOERR
 
     HDassert(id_type >= 1 && id_type < H5I_next_type);
 
@@ -950,7 +928,6 @@ H5I_object_verify(hid_t id, H5I_type_t id_type)
         ret_value = (void *)id_ptr->obj_ptr;
     } /* end if */
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5I_object_verify() */
 
@@ -974,16 +951,15 @@ done:
 H5I_type_t
 H5I_get_type(hid_t id)
 {
-    H5I_type_t		ret_value = H5I_BADID;
+    H5I_type_t ret_value = H5I_BADID;           /* Return value */
 
-    FUNC_ENTER_NOAPI(H5I_BADID)
+    FUNC_ENTER_NOAPI_NOERR
 
     if(id > 0)
         ret_value = H5I_TYPE(id);
 
     HDassert(ret_value >= H5I_BADID && ret_value < H5I_next_type);
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5I_get_type() */
 
@@ -1006,7 +982,7 @@ done:
 H5I_type_t
 H5Iget_type(hid_t id)
 {
-    H5I_type_t		ret_value = H5I_BADID;          /* Return value */
+    H5I_type_t ret_value = H5I_BADID;   /* Return value */
 
     FUNC_ENTER_API(H5I_BADID)
     H5TRACE1("It", "i", id);
@@ -1041,7 +1017,7 @@ done:
 void *
 H5Iremove_verify(hid_t id, H5I_type_t id_type)
 {
-    void * ret_value;                      /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_API(NULL)
     H5TRACE2("*x", "iIt", id, id_type);
@@ -1108,8 +1084,8 @@ H5I__remove_verify(hid_t id, H5I_type_t id_type)
 static void *
 H5I__remove_common(H5I_id_type_t *type_ptr, hid_t id)
 {
-    H5I_id_info_t	*curr_id;	/*ptr to the current atom	*/
-    void *	        ret_value;	/*return value			*/
+    H5I_id_info_t *curr_id;	/* Pointer to the current atom */
+    void *ret_value = NULL;	/* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -1149,9 +1125,9 @@ done:
 void *
 H5I_remove(hid_t id)
 {
-    H5I_id_type_t	*type_ptr;	/*ptr to the atomic type	*/
-    H5I_type_t		type;		/*atom's atomic type		*/
-    void *	        ret_value;	/*return value			*/
+    H5I_id_type_t	*type_ptr;	        /* Pointer to the atomic type */
+    H5I_type_t		type;		        /* Atom's atomic type */
+    void *	        ret_value = NULL;	/* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1190,7 +1166,7 @@ done:
 int
 H5Idec_ref(hid_t id)
 {
-    int ret_value;                      /* Return value */
+    int ret_value = 0;          /* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE1("Is", "i", id);
@@ -1228,8 +1204,8 @@ done:
 int
 H5I_dec_ref(hid_t id)
 {
-    H5I_id_info_t	*id_ptr;	/*ptr to the new ID	*/
-    int ret_value;                      /* Return value */
+    H5I_id_info_t *id_ptr;      /* Pointer to the new ID */
+    int ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1298,8 +1274,8 @@ done:
 int
 H5I_dec_app_ref(hid_t id)
 {
-    H5I_id_info_t	*id_ptr;	/*ptr to the new ID	*/
-    int ret_value;                      /* Return value */
+    H5I_id_info_t *id_ptr;      /* Pointer to the new ID */
+    int ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1346,7 +1322,7 @@ done:
 int
 H5I_dec_app_ref_always_close(hid_t id)
 {
-    int ret_value;                      /* Return value */
+    int ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1424,8 +1400,8 @@ done:
 int
 H5I_inc_ref(hid_t id, hbool_t app_ref)
 {
-    H5I_id_info_t	*id_ptr;	/*ptr to the ID		*/
-    int ret_value;                      /* Return value */
+    H5I_id_info_t *id_ptr;      /* Pointer to the ID */
+    int ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1499,8 +1475,8 @@ done:
 int
 H5I_get_ref(hid_t id, hbool_t app_ref)
 {
-    H5I_id_info_t	*id_ptr;	/*ptr to the ID		*/
-    int ret_value;                      /* Return value */
+    H5I_id_info_t *id_ptr;      /* Pointer to the ID */
+    int ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1574,8 +1550,8 @@ done:
 static int
 H5I__inc_type_ref(H5I_type_t type)
 {
-    H5I_id_type_t	*type_ptr;	/* ptr to the type	*/
-    int ret_value;                      /* Return value */
+    H5I_id_type_t *type_ptr;    /* Pointer to the type */
+    int ret_value = -1;         /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -1658,8 +1634,8 @@ done:
 herr_t
 H5I_dec_type_ref(H5I_type_t type)
 {
-    H5I_id_type_t	*type_ptr;      /* Pointer to the ID type */
-    herr_t		ret_value;      /* Return value */
+    H5I_id_type_t *type_ptr;    /* Pointer to the ID type */
+    herr_t ret_value = SUCCEED; /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1747,7 +1723,7 @@ static int
 H5I__get_type_ref(H5I_type_t type)
 {
     H5I_id_type_t	*type_ptr;	/*ptr to the type	*/
-    int ret_value;                      /* Return value */
+    int ret_value = -1;                 /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -1825,7 +1801,7 @@ static int
 H5I__search_cb(void *obj, hid_t id, void *_udata)
 {
     H5I_search_ud_t *udata = (H5I_search_ud_t *)_udata; /* User data for callback */
-    int ret_value;     /* Callback return value */
+    int ret_value = -1;         /* Callback return value */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -2013,7 +1989,7 @@ H5I__find_id(hid_t id)
 {
     H5I_type_t		type;			/*ID's type		*/
     H5I_id_type_t	*type_ptr;		/*ptr to the type	*/
-    H5I_id_info_t	*ret_value;		/*return value		*/
+    H5I_id_info_t	*ret_value = NULL;	/* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -2130,7 +2106,7 @@ hid_t
 H5I_get_file_id(hid_t obj_id, hbool_t app_ref)
 {
     H5I_type_t type;            /* ID type */
-    hid_t ret_value;            /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;            /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Imodule.h b/src/H5Imodule.h
new file mode 100644
index 0000000..19cc9a4
--- /dev/null
+++ b/src/H5Imodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5I package.  Including this header means that the source file
+ *		is part of the H5I package.
+ */
+#ifndef _H5Imodule_H
+#define _H5Imodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5I_MODULE
+#define H5_MY_PKG       H5I
+#define H5_MY_PKG_ERR   H5E_ATOM
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5Imodule_H */
+
diff --git a/src/H5Ipkg.h b/src/H5Ipkg.h
index 1666b76..0a6ae8c 100644
--- a/src/H5Ipkg.h
+++ b/src/H5Ipkg.h
@@ -21,7 +21,7 @@
  *		the H5I package.  Source files outside the H5I package should
  *		include H5Iprivate.h instead.
  */
-#ifndef H5I_PACKAGE
+#if !(defined H5I_FRIEND || defined H5I_MODULE)
 #error "Do not include this file outside the H5I package!"
 #endif
 
diff --git a/src/H5Itest.c b/src/H5Itest.c
index 5236e8d..9d451c6 100644
--- a/src/H5Itest.c
+++ b/src/H5Itest.c
@@ -23,7 +23,7 @@
 /* Module Setup */
 /****************/
 
-#define H5I_PACKAGE		/*suppress error about including H5Ipkg	  */
+#include "H5Imodule.h"          /* This source code file is part of the H5I module */
 #define H5I_TESTING		/*suppress warning about H5I testing funcs*/
 
 
@@ -80,7 +80,7 @@ ssize_t
 H5I_get_name_test(hid_t id, char *name/*out*/, size_t size, hbool_t *cached)
 {
     H5G_loc_t     loc;          /* Object location */
-    ssize_t       ret_value;    /* Return value */
+    ssize_t       ret_value = -1;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5L.c b/src/H5L.c
index 73d363e..a1f3b6e 100644
--- a/src/H5L.c
+++ b/src/H5L.c
@@ -17,10 +17,8 @@
 /* Module Setup */
 /****************/
 
-#define H5L_PACKAGE		/*suppress error about including H5Lpkg   */
+#include "H5Lmodule.h"          /* This source code file is part of the H5L module */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5L_init_interface
 
 /***********/
 /* Headers */
@@ -191,6 +189,9 @@ static herr_t H5L_get_name_by_idx_cb(H5G_loc_t *grp_loc/*in*/,
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -235,7 +236,7 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5L_init_interface
+ * Function:	H5L__init_package
  *
  * Purpose:	Initialize information specific to H5L interface.
  *
@@ -246,12 +247,12 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t
-H5L_init_interface(void)
+herr_t
+H5L__init_package(void)
 {
     herr_t ret_value = SUCCEED;   /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_PACKAGE
 
     /* Initialize user-defined link classes */
     if(H5L_register_external() < 0)
@@ -259,13 +260,13 @@ H5L_init_interface(void)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5L_init_interface() */
+} /* end H5L_init_package() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5L_term_interface
+ * Function:	H5L_term_package
  *
- * Purpose:	Terminate any resources allocated in H5L_init_interface.
+ * Purpose:	Terminate any resources allocated in H5L__init_package.
  *
  * Return:	Non-negative on success/Negative on failure
  *
@@ -275,21 +276,27 @@ done:
  *-------------------------------------------------------------------------
  */
 int
-H5L_term_interface(void)
+H5L_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    /* Free the table of link types */
-    H5L_table_g = (H5L_class_t *)H5MM_xfree(H5L_table_g);
-    H5L_table_used_g = H5L_table_alloc_g = 0;
+    if(H5_PKG_INIT_VAR) {
+        /* Free the table of link types */
+        if(H5L_table_g) {
+            H5L_table_g = (H5L_class_t *)H5MM_xfree(H5L_table_g);
+            H5L_table_used_g = H5L_table_alloc_g = 0;
+            n++;
+        } /* end if */
 
-    /* Mark the interface as uninitialized */
-    H5_interface_initialize_g = 0;
+        /* Mark the interface as uninitialized */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
+    } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* H5L_term_interface() */
+} /* H5L_term_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -2756,7 +2763,7 @@ static htri_t
 H5L_exists(const H5G_loc_t *loc, const char *name, hid_t lapl_id, hid_t dxpl_id)
 {
     hbool_t exists = FALSE;     /* Whether the link exists in the group */
-    htri_t ret_value;           /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -2913,7 +2920,7 @@ done:
 hid_t
 H5L_get_default_lcpl(void)
 {
-    hid_t ret_value;            /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;          /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5Lexternal.c b/src/H5Lexternal.c
index 08d401e..139c5e6 100644
--- a/src/H5Lexternal.c
+++ b/src/H5Lexternal.c
@@ -13,12 +13,17 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg   */
-#define H5L_PACKAGE		/*suppress error about including H5Lpkg   */
+/****************/
+/* Module Setup */
+/****************/
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5L_init_extern_interface
+#define H5G_FRIEND		/*suppress error about including H5Gpkg   */
+#include "H5Lmodule.h"          /* This source code file is part of the H5L module */
 
+
+/***********/
+/* Headers */
+/***********/
 #include "H5private.h"          /* Generic Functions                    */
 #include "H5ACprivate.h"        /* Metadata cache                       */
 #include "H5Eprivate.h"         /* Error handling                       */
@@ -29,13 +34,52 @@
 #include "H5Opublic.h"          /* File objects                         */
 #include "H5Pprivate.h"         /* Property lists                       */
 
+
+/****************/
+/* Local Macros */
+/****************/
+
+/* Version of external link format */
+#define H5L_EXT_VERSION         0
+
+/* Valid flags for external links */
+#define H5L_EXT_FLAGS_ALL       0
+
+/* Size of local link name buffer for traversing external links */
+#define H5L_EXT_TRAVERSE_BUF_SIZE       256
+
+
+/******************/
+/* Local Typedefs */
+/******************/
+
+
+/********************/
+/* Local Prototypes */
+/********************/
+
 static hid_t H5L_extern_traverse(const char H5_ATTR_UNUSED *link_name, hid_t cur_group,
     const void *udata, size_t H5_ATTR_UNUSED udata_size, hid_t lapl_id);
 static ssize_t H5L_extern_query(const char H5_ATTR_UNUSED * link_name, const void *udata,
     size_t udata_size, void * buf /*out*/, size_t buf_size);
 
+
+/*********************/
+/* Package Variables */
+/*********************/
+
+
+/*****************************/
+/* Library Private Variables */
+/*****************************/
+
+
+/*******************/
+/* Local Variables */
+/*******************/
+
 /* Default External Link link class */
-const H5L_class_t H5L_EXTERN_LINK_CLASS[1] = {{
+static const H5L_class_t H5L_EXTERN_LINK_CLASS[1] = {{
     H5L_LINK_CLASS_T_VERS,      /* H5L_class_t version            */
     H5L_TYPE_EXTERNAL,		/* Link type id number            */
     "external",                 /* Link name for debugging        */
@@ -47,41 +91,9 @@ const H5L_class_t H5L_EXTERN_LINK_CLASS[1] = {{
     H5L_extern_query            /* Query callback                 */
 }};
 
-/* Version of external link format */
-#define H5L_EXT_VERSION         0
-
-/* Valid flags for external links */
-#define H5L_EXT_FLAGS_ALL       0
-
-/* Size of local link name buffer for traversing external links */
-#define H5L_EXT_TRAVERSE_BUF_SIZE       256
 
 
 /*--------------------------------------------------------------------------
-NAME
-   H5L_init_extern_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5L_init_extern_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5L_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5L_init_extern_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5L_init())
-} /* H5L_init_extern_interface() */
-
-
-
-/*--------------------------------------------------------------------------
  * Function: H5L_getenv_prefix_name --
  *
  * Purpose:  Get the first pathname in the list of pathnames stored in ENV_PREFIX,
@@ -210,7 +222,7 @@ H5L_extern_traverse(const char H5_ATTR_UNUSED *link_name, hid_t cur_group,
     char        *actual_file_name = NULL; /* Parent file's actual name */
     H5P_genplist_t  *fa_plist;          /* File access property list pointer */
     H5F_close_degree_t 	fc_degree = H5F_CLOSE_WEAK;  /* File close degree for target file */
-    hid_t       ret_value;              /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;  /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -254,7 +266,7 @@ H5L_extern_traverse(const char H5_ATTR_UNUSED *link_name, hid_t cur_group,
 	HGOTO_ERROR(H5E_LINK, H5E_CANTGET, FAIL, "can't get parent's file access property list")
 
     /* Get callback_info */
-    if(H5P_get(plist, H5L_ACS_ELINK_CB_NAME, &cb_info)<0)
+    if(H5P_get(plist, H5L_ACS_ELINK_CB_NAME, &cb_info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get elink callback info")
 
     /* Get file access property list */
@@ -279,7 +291,7 @@ H5L_extern_traverse(const char H5_ATTR_UNUSED *link_name, hid_t cur_group,
         /* Check if we need to allocate larger buffer */
         if((size_t)group_name_len > sizeof(local_group_name)) {
             if(NULL == (parent_group_name = (char *)H5MM_malloc((size_t)group_name_len)))
-                HGOTO_ERROR(H5E_LINK, H5E_CANTALLOC, FAIL, "can't allocate buffer to hold group name, group_name_len = %Zu", group_name_len)
+                HGOTO_ERROR(H5E_LINK, H5E_CANTALLOC, FAIL, "can't allocate buffer to hold group name, group_name_len = %zd", group_name_len)
         } /* end if */
         else
             parent_group_name = local_group_name;
@@ -378,7 +390,7 @@ H5L_extern_traverse(const char H5_ATTR_UNUSED *link_name, hid_t cur_group,
 
     /* try searching from property list */
     if(ext_file == NULL) {
-        if(H5P_get(plist, H5L_ACS_ELINK_PREFIX_NAME, &my_prefix) < 0)
+        if(H5P_peek(plist, H5L_ACS_ELINK_PREFIX_NAME, &my_prefix) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get external link prefix")
         if(my_prefix) {
             if(H5L_build_name(my_prefix, temp_file_name, &full_name/*out*/) < 0)
diff --git a/src/H5Lmodule.h b/src/H5Lmodule.h
new file mode 100644
index 0000000..e665c81
--- /dev/null
+++ b/src/H5Lmodule.h
@@ -0,0 +1,36 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5L package.  Including this header means that the source file
+ *		is part of the H5L package.
+ */
+#ifndef _H5Lmodule_H
+#define _H5Lmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5L_MODULE
+#define H5_MY_PKG       H5L
+#define H5_MY_PKG_ERR   H5E_LINK
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Lmodule_H */
+
+
diff --git a/src/H5Lpkg.h b/src/H5Lpkg.h
index 2e931f5..bb8534b 100644
--- a/src/H5Lpkg.h
+++ b/src/H5Lpkg.h
@@ -21,7 +21,7 @@
  *              only within the H5L package. Source files outside the
  *              H5L package should include H5Lprivate.h instead.
  */
-#ifndef H5L_PACKAGE
+#if !(defined H5L_FRIEND || defined H5L_MODULE)
 #error "Do not include this file outside the H5L package!"
 #endif
 
diff --git a/src/H5MF.c b/src/H5MF.c
index 8a227d7..52ea82a 100644
--- a/src/H5MF.c
+++ b/src/H5MF.c
@@ -28,8 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-#define H5MF_PACKAGE		/*suppress error about including H5MFpkg  */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
+#include "H5MFmodule.h"         /* This source code file is part of the H5MF module */
 
 
 /***********/
@@ -92,6 +92,9 @@ static herr_t H5MF_alloc_close(H5F_t *f, hid_t dxpl_id, H5FD_mem_t type);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -436,7 +439,7 @@ H5MF_alloc(H5F_t *f, H5FD_mem_t alloc_type, hid_t dxpl_id, hsize_t size)
     H5P_genplist_t *dxpl = NULL;        /* DXPL for setting ring */
     H5AC_ring_t orig_ring = H5AC_RING_INV;      /* Original ring value */
     H5FD_mem_t  fs_type;                /* Free space type (mapped from allocation type) */
-    haddr_t	ret_value;              /* Return value */
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 #ifdef H5MF_ALLOC_DEBUG
@@ -571,7 +574,7 @@ haddr_t
 H5MF_alloc_tmp(H5F_t *f, hsize_t size)
 {
     haddr_t eoa;                /* End of allocated space in the file */
-    haddr_t ret_value;          /* Return value */
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 #ifdef H5MF_ALLOC_DEBUG
@@ -796,7 +799,7 @@ H5MF_try_extend(H5F_t *f, hid_t dxpl_id, H5FD_mem_t alloc_type, haddr_t addr,
     H5AC_ring_t orig_ring = H5AC_RING_INV;      /* Original ring value */
     haddr_t     end;            /* End of block to extend */
     H5FD_mem_t  map_type;       /* Mapped type */
-    htri_t	ret_value;      /* Return value */
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 #ifdef H5MF_ALLOC_DEBUG
@@ -1029,7 +1032,7 @@ H5MF_try_shrink(H5F_t *f, H5FD_mem_t alloc_type, hid_t dxpl_id, haddr_t addr,
     H5MF_sect_ud_t udata;               /* User data for callback */
     H5P_genplist_t *dxpl = NULL;        /* DXPL for setting ring */
     H5AC_ring_t orig_ring = H5AC_RING_INV;      /* Original ring value */
-    htri_t ret_value;                   /* Return value */
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 #ifdef H5MF_ALLOC_DEBUG
@@ -1411,7 +1414,7 @@ H5MF_get_free_sections(H5F_t *f, hid_t dxpl_id, H5FD_mem_t type, size_t nsects,
     H5AC_ring_t orig_ring = H5AC_RING_INV;      /* Original ring value */
     H5FD_mem_t	start_type, end_type;   /* Memory types to iterate over */
     H5FD_mem_t 	ty;     		/* Memory type for iteration */
-    ssize_t 	ret_value;         	/* Return value */
+    ssize_t 	ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5MFaggr.c b/src/H5MFaggr.c
index c5a7b49..40f3ac0 100644
--- a/src/H5MFaggr.c
+++ b/src/H5MFaggr.c
@@ -25,8 +25,8 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-#define H5MF_PACKAGE		/*suppress error about including H5MFpkg  */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
+#include "H5MFmodule.h"         /* This source code file is part of the H5MF module */
 
 
 /***********/
@@ -97,7 +97,7 @@ static herr_t H5MF_aggr_free(H5F_t *f, hid_t dxpl_id, H5FD_mem_t type,
 haddr_t
 H5MF_aggr_vfd_alloc(H5F_t *f, H5FD_mem_t alloc_type, hid_t dxpl_id, hsize_t size)
 {
-    haddr_t	ret_value;              /* Return value */
+    haddr_t     ret_value = HADDR_UNDEF;        /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 #ifdef H5MF_ALLOC_DEBUG
@@ -158,7 +158,7 @@ H5MF_aggr_alloc(H5F_t *f, hid_t dxpl_id, H5F_blk_aggr_t *aggr,
     haddr_t	eoa_frag_addr = HADDR_UNDEF;    /* Address of fragment at EOA */
     hsize_t	eoa_frag_size = 0;      /* Size of fragment at EOA */
     haddr_t	eoa = HADDR_UNDEF;      /* Initial EOA for the file */
-    haddr_t 	ret_value;              /* Return value */
+    haddr_t     ret_value = HADDR_UNDEF;        /* Return value */
 
     FUNC_ENTER_NOAPI(HADDR_UNDEF)
 #ifdef H5MF_AGGR_DEBUG
@@ -871,7 +871,7 @@ H5MF_aggrs_try_shrink_eoa(H5F_t *f, hid_t dxpl_id)
 {
     htri_t ma_status;        /* Whether the metadata aggregator can shrink the EOA */
     htri_t sda_status;       /* Whether the small data aggregator can shrink the EOA */
-    htri_t ret_value;        /* Return value */
+    htri_t ret_value = FAIL; /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5MFdbg.c b/src/H5MFdbg.c
index 3a664ef..59da9e8 100644
--- a/src/H5MFdbg.c
+++ b/src/H5MFdbg.c
@@ -28,8 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-#define H5MF_PACKAGE		/*suppress error about including H5MFpkg  */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
+#include "H5MFmodule.h"         /* This source code file is part of the H5MF module */
 #define H5MF_DEBUGGING          /* Need access to file space debugging routines */
 
 
diff --git a/src/H5MFmodule.h b/src/H5MFmodule.h
new file mode 100644
index 0000000..6e5f8ad
--- /dev/null
+++ b/src/H5MFmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5MF package.  Including this header means that the source file
+ *		is part of the H5MF package.
+ */
+#ifndef _H5MFmodule_H
+#define _H5MFmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5MF_MODULE
+#define H5_MY_PKG       H5MF
+#define H5_MY_PKG_ERR   H5E_RESOURCE
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5MFmodule_H */
+
diff --git a/src/H5MFpkg.h b/src/H5MFpkg.h
index 2071a0a..1a62710 100644
--- a/src/H5MFpkg.h
+++ b/src/H5MFpkg.h
@@ -21,7 +21,7 @@
  *		the H5MF package.  Source files outside the H5MF package should
  *		include H5MFprivate.h instead.
  */
-#ifndef H5MF_PACKAGE
+#if !(defined H5MF_FRIEND || defined H5MF_MODULE)
 #error "Do not include this file outside the H5MF package!"
 #endif
 
diff --git a/src/H5MFsection.c b/src/H5MFsection.c
index 20b9984..f333356 100644
--- a/src/H5MFsection.c
+++ b/src/H5MFsection.c
@@ -25,8 +25,8 @@
 /* Module Setup */
 /****************/
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
-#define H5MF_PACKAGE		/*suppress error about including H5MFpkg  */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
+#include "H5MFmodule.h"         /* This source code file is part of the H5MF module */
 
 
 /***********/
@@ -132,7 +132,7 @@ H5MF_free_section_t *
 H5MF_sect_simple_new(haddr_t sect_off, hsize_t sect_size)
 {
     H5MF_free_section_t *sect = NULL;   /* 'Simple' free space section to add */
-    H5MF_free_section_t *ret_value;     /* Return value */
+    H5MF_free_section_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -178,7 +178,7 @@ H5MF_sect_simple_deserialize(const H5FS_section_class_t H5_ATTR_UNUSED *cls,
     hsize_t sect_size, unsigned H5_ATTR_UNUSED *des_flags)
 {
     H5MF_free_section_t *sect;          /* New section */
-    H5FS_section_info_t *ret_value;     /* Return value */
+    H5FS_section_info_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -219,7 +219,7 @@ H5MF_sect_simple_can_merge(const H5FS_section_info_t *_sect1,
 {
     const H5MF_free_section_t *sect1 = (const H5MF_free_section_t *)_sect1;   /* File free section */
     const H5MF_free_section_t *sect2 = (const H5MF_free_section_t *)_sect2;   /* File free section */
-    htri_t ret_value;                   /* Return value */
+    htri_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -300,7 +300,7 @@ H5MF_sect_simple_can_shrink(const H5FS_section_info_t *_sect, void *_udata)
     H5MF_sect_ud_t *udata = (H5MF_sect_ud_t *)_udata;   /* User data for callback */
     haddr_t eoa;                /* End of address space in the file */
     haddr_t end;                /* End of section to extend */
-    htri_t ret_value;           /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -519,7 +519,7 @@ H5MF_sect_simple_valid(const H5FS_section_class_t H5_ATTR_UNUSED *cls,
 static H5FS_section_info_t *
 H5MF_sect_simple_split(H5FS_section_info_t *sect, hsize_t frag_size)
 {
-    H5MF_free_section_t *ret_value;     /* Return value */
+    H5MF_free_section_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5MP.c b/src/H5MP.c
index 4820b76..50fc598 100644
--- a/src/H5MP.c
+++ b/src/H5MP.c
@@ -29,7 +29,7 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5MP_PACKAGE		/*suppress error about including H5MPpkg  */
+#include "H5MPmodule.h"         /* This source code file is part of the H5MP module */
 
 /* Private headers */
 #include "H5private.h"		/* Generic Functions			*/
@@ -63,6 +63,9 @@
 /* Package Variable Definitions */
 /********************************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /********************/
 /* Static Variables */
@@ -90,7 +93,7 @@ H5MP_pool_t *
 H5MP_create(size_t page_size, unsigned flags)
 {
     H5MP_pool_t *mp = NULL;             /* New memory pool header */
-    H5MP_pool_t *ret_value;             /* Return value */
+    H5MP_pool_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -141,7 +144,7 @@ H5MP_new_page(H5MP_pool_t *mp, size_t page_size)
 {
     H5MP_page_t *new_page;              /* New page created */
     H5MP_page_blk_t *first_blk;         /* Pointer to first block in page */
-    H5MP_page_t *ret_value;             /* Return value */
+    H5MP_page_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -212,7 +215,7 @@ H5MP_malloc (H5MP_pool_t *mp, size_t request)
     H5MP_page_t *alloc_page = NULL; /* Page to allocate space from */
     H5MP_page_blk_t *alloc_free;    /* Pointer to free space in page */
     size_t needed;                  /* Size requested, plus block header and alignment */
-    void *ret_value;                /* Return value */
+    void *ret_value = NULL;         /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
diff --git a/src/H5MPmodule.h b/src/H5MPmodule.h
new file mode 100644
index 0000000..ca6c405
--- /dev/null
+++ b/src/H5MPmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5MP package.  Including this header means that the source file
+ *		is part of the H5MP package.
+ */
+#ifndef _H5MPmodule_H
+#define _H5MPmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5MP_MODULE
+#define H5_MY_PKG       H5MP
+#define H5_MY_PKG_ERR   H5E_RESOURCE
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5MPmodule_H */
+
diff --git a/src/H5MPpkg.h b/src/H5MPpkg.h
index 5a0b1f8..e724146 100644
--- a/src/H5MPpkg.h
+++ b/src/H5MPpkg.h
@@ -21,7 +21,7 @@
  *		the H5MP package.  Source files outside the H5MP package should
  *		include H5MPprivate.h instead.
  */
-#ifndef H5MP_PACKAGE
+#if !(defined H5MP_FRIEND || defined H5MP_MODULE)
 #error "Do not include this file outside the H5MP package!"
 #endif
 
diff --git a/src/H5MPtest.c b/src/H5MPtest.c
index ccbd140..3f218db 100644
--- a/src/H5MPtest.c
+++ b/src/H5MPtest.c
@@ -19,7 +19,7 @@
  * Purpose:	Memory pool testing functions.
  */
 
-#define H5MP_PACKAGE		/*suppress error about including H5MPpkg  */
+#include "H5MPmodule.h"         /* This source code file is part of the H5MP module */
 #define H5MP_TESTING		/*include H5MP testing funcs*/
 
 /* Private headers */
diff --git a/src/H5O.c b/src/H5O.c
index 6b9852b..6478f34 100644
--- a/src/H5O.c
+++ b/src/H5O.c
@@ -28,10 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5O_init_interface
 
 /***********/
 /* Headers */
@@ -94,6 +92,9 @@ static const H5O_obj_class_t *H5O_obj_class_real(H5O_t *oh);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Header message ID to class mapping */
 
 /* Remember to increment H5O_MSG_TYPES in H5Opkg.h when adding a new
@@ -178,7 +179,7 @@ static const H5O_obj_class_t *const H5O_obj_class_g[] = {
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5O_init_interface
+ * Function:	H5O__init_package
  *
  * Purpose:	Initialize information specific to H5O interface.
  *
@@ -187,16 +188,12 @@ static const H5O_obj_class_t *const H5O_obj_class_g[] = {
  * Programmer:	Quincey Koziol
  *              Thursday, January 18, 2007
  *
- * Changes:     JRM -- 12/12/07
- *              Added santity check verifying that H5O_msg_class_g
- *              is big enough.
- *
  *-------------------------------------------------------------------------
  */
-static herr_t
-H5O_init_interface(void)
+herr_t
+H5O__init_package(void)
 {
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_PACKAGE_NOERR
 
     /* H5O interface sanity checks */
     HDcompile_assert(H5O_MSG_TYPES == NELMTS(H5O_msg_class_g));
@@ -205,7 +202,7 @@ H5O_init_interface(void)
     HDcompile_assert(H5O_UNKNOWN_ID < H5O_MSG_TYPES);
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5O_init_interface() */
+} /* end H5O__init_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -247,7 +244,7 @@ H5Oopen(hid_t loc_id, const char *name, hid_t lapl_id)
 
     /* Open the object */
     if((ret_value = H5O_open_name(&loc, name, lapl_id, TRUE)) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_CANTOPENOBJ, FAIL, "unable to open object")
+        HGOTO_ERROR(H5E_OHDR, H5E_CANTOPENOBJ, FAIL, "unable to open object")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -313,18 +310,18 @@ H5Oopen_by_idx(hid_t loc_id, const char *group_name, H5_index_t idx_type,
 
     /* Find the object's location, according to the order in the index */
     if(H5G_loc_find_by_idx(&loc, group_name, idx_type, order, n, &obj_loc/*out*/, lapl_id, H5AC_ind_dxpl_id) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "group not found")
+        HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "group not found")
     loc_found = TRUE;
 
     /* Open the object */
     if((ret_value = H5O_open_by_loc(&obj_loc, lapl_id, H5AC_ind_dxpl_id, TRUE)) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_CANTOPENOBJ, FAIL, "unable to open object")
+        HGOTO_ERROR(H5E_OHDR, H5E_CANTOPENOBJ, FAIL, "unable to open object")
 
 done:
     /* Release the object location if we failed after copying it */
     if(ret_value < 0 && loc_found)
         if(H5G_loc_free(&obj_loc) < 0)
-            HDONE_ERROR(H5E_SYM, H5E_CANTRELEASE, FAIL, "can't free location")
+            HDONE_ERROR(H5E_OHDR, H5E_CANTRELEASE, FAIL, "can't free location")
 
     FUNC_LEAVE_API(ret_value)
 } /* end H5Oopen_by_idx() */
@@ -394,7 +391,7 @@ H5Oopen_by_addr(hid_t loc_id, haddr_t addr)
 
     /* Open the object */
     if((ret_value = H5O_open_by_loc(&obj_loc, lapl_id, H5AC_ind_dxpl_id, TRUE)) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_CANTOPENOBJ, FAIL, "unable to open object")
+        HGOTO_ERROR(H5E_OHDR, H5E_CANTOPENOBJ, FAIL, "unable to open object")
 
 done:
 
@@ -453,7 +450,7 @@ H5Olink(hid_t obj_id, hid_t new_loc_id, const char *new_name, hid_t lcpl_id,
 
     /* Link to the object */
     if(H5L_link(&new_loc, new_name, &obj_loc, lcpl_id, lapl_id, H5AC_dxpl_id) < 0)
-        HGOTO_ERROR(H5E_LINK, H5E_CANTINIT, FAIL, "unable to create link")
+        HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to create link")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -614,7 +611,7 @@ H5Oget_info(hid_t loc_id, H5O_info_t *oinfo)
 
     /* Retrieve the object's information */
     if(H5G_loc_info(&loc, ".", TRUE, oinfo/*out*/, H5P_LINK_ACCESS_DEFAULT, H5AC_ind_dxpl_id) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "object not found")
+        HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "object not found")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -658,7 +655,7 @@ H5Oget_info_by_name(hid_t loc_id, const char *name, H5O_info_t *oinfo, hid_t lap
 
     /* Retrieve the object's information */
     if(H5G_loc_info(&loc, name, TRUE, oinfo/*out*/, lapl_id, H5AC_ind_dxpl_id) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "object not found")
+        HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "object not found")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -718,17 +715,17 @@ H5Oget_info_by_idx(hid_t loc_id, const char *group_name, H5_index_t idx_type,
 
     /* Find the object's location, according to the order in the index */
     if(H5G_loc_find_by_idx(&loc, group_name, idx_type, order, n, &obj_loc/*out*/, lapl_id, H5AC_ind_dxpl_id) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "group not found")
+        HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "group not found")
     loc_found = TRUE;
 
     /* Retrieve the object's information */
     if(H5O_get_info(obj_loc.oloc, H5AC_ind_dxpl_id, TRUE, oinfo) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_CANTGET, FAIL, "can't retrieve object info")
+        HGOTO_ERROR(H5E_OHDR, H5E_CANTGET, FAIL, "can't retrieve object info")
 
 done:
     /* Release the object location */
     if(loc_found && H5G_loc_free(&obj_loc) < 0)
-        HDONE_ERROR(H5E_SYM, H5E_CANTRELEASE, FAIL, "can't free location")
+        HDONE_ERROR(H5E_OHDR, H5E_CANTRELEASE, FAIL, "can't free location")
 
     FUNC_LEAVE_API(ret_value)
 } /* end H5Oget_info_by_idx() */
@@ -766,7 +763,7 @@ H5Oset_comment(hid_t obj_id, const char *comment)
 
     /* (Re)set the object's comment */
     if(H5G_loc_set_comment(&loc, ".", comment, H5P_LINK_ACCESS_DEFAULT, H5AC_ind_dxpl_id) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "object not found")
+        HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "object not found")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -813,7 +810,7 @@ H5Oset_comment_by_name(hid_t loc_id, const char *name, const char *comment,
 
     /* (Re)set the object's comment */
     if(H5G_loc_set_comment(&loc, name, comment, lapl_id, H5AC_ind_dxpl_id) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "object not found")
+        HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "object not found")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -851,7 +848,7 @@ H5Oget_comment(hid_t obj_id, char *comment, size_t bufsize)
 
     /* Retrieve the object's comment */
     if((ret_value = H5G_loc_get_comment(&loc, ".", comment/*out*/, bufsize, H5P_LINK_ACCESS_DEFAULT, H5AC_ind_dxpl_id)) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "object not found")
+        HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "object not found")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -897,7 +894,7 @@ H5Oget_comment_by_name(hid_t loc_id, const char *name, char *comment, size_t buf
 
     /* Retrieve the object's comment */
     if((ret_value = H5G_loc_get_comment(&loc, name, comment/*out*/, bufsize, lapl_id, H5AC_ind_dxpl_id)) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "object not found")
+        HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "object not found")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -955,7 +952,7 @@ H5Ovisit(hid_t obj_id, H5_index_t idx_type, H5_iter_order_t order,
 
     /* Call internal object visitation routine */
     if((ret_value = H5O_visit(obj_id, ".", idx_type, order, op, op_data, H5P_LINK_ACCESS_DEFAULT, H5AC_ind_dxpl_id)) < 0)
-	HGOTO_ERROR(H5E_SYM, H5E_BADITER, FAIL, "object visitation failed")
+	HGOTO_ERROR(H5E_OHDR, H5E_BADITER, FAIL, "object visitation failed")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -1021,7 +1018,7 @@ H5Ovisit_by_name(hid_t loc_id, const char *obj_name, H5_index_t idx_type,
 
     /* Call internal object visitation routine */
     if((ret_value = H5O_visit(loc_id, obj_name, idx_type, order, op, op_data, lapl_id, H5AC_ind_dxpl_id)) < 0)
-	HGOTO_ERROR(H5E_SYM, H5E_BADITER, FAIL, "object visitation failed")
+	HGOTO_ERROR(H5E_OHDR, H5E_BADITER, FAIL, "object visitation failed")
 
 done:
     FUNC_LEAVE_API(ret_value)
@@ -1365,17 +1362,17 @@ H5O_open_name(H5G_loc_t *loc, const char *name, hid_t lapl_id, hbool_t app_ref)
 
     /* Find the object's location */
     if(H5G_loc_find(loc, name, &obj_loc/*out*/, lapl_id, dxpl_id) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "object not found")
+        HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "object not found")
     loc_found = TRUE;
 
     /* Open the object */
     if((ret_value = H5O_open_by_loc(&obj_loc, lapl_id, dxpl_id, app_ref)) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_CANTOPENOBJ, FAIL, "unable to open object")
+        HGOTO_ERROR(H5E_OHDR, H5E_CANTOPENOBJ, FAIL, "unable to open object")
 
 done:
     if(ret_value < 0 && loc_found)
         if(H5G_loc_free(&obj_loc) < 0)
-            HDONE_ERROR(H5E_SYM, H5E_CANTRELEASE, FAIL, "can't free location")
+            HDONE_ERROR(H5E_OHDR, H5E_CANTRELEASE, FAIL, "can't free location")
 
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5O_open_name() */
@@ -1398,7 +1395,7 @@ hid_t
 H5O_open_by_loc(const H5G_loc_t *obj_loc, hid_t lapl_id, hid_t dxpl_id, hbool_t app_ref)
 {
     const H5O_obj_class_t *obj_class;   /* Class of object for location */
-    hid_t      ret_value;               /* Return value */
+    hid_t               ret_value = H5I_INVALID_HID;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1494,7 +1491,7 @@ int
 H5O_link_oh(H5F_t *f, int adjust, hid_t dxpl_id, H5O_t *oh, hbool_t *deleted)
 {
     haddr_t addr = H5O_OH_GET_ADDR(oh);     /* Object header address */
-    int	ret_value;                      /* Return value */
+    int	ret_value = -1;                     /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1610,7 +1607,7 @@ H5O_link(const H5O_loc_t *loc, int adjust, hid_t dxpl_id)
 {
     H5O_t	*oh = NULL;
     hbool_t deleted = FALSE;            /* Whether the object was deleted */
-    int	ret_value;                      /* Return value */
+    int	ret_value = -1;                 /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, loc->addr, FAIL)
 
@@ -1661,7 +1658,7 @@ H5O_protect(const H5O_loc_t *loc, hid_t dxpl_id, unsigned prot_flags)
     H5O_cache_ud_t udata;       /* User data for protecting object header */
     H5O_cont_msgs_t cont_msg_info;      /* Continuation message info */
     unsigned file_intent;       /* R/W intent on file */
-    H5O_t *ret_value;           /* Return value */
+    H5O_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, loc->addr, NULL)
 
@@ -1880,8 +1877,8 @@ done:
 H5O_t *
 H5O_pin(const H5O_loc_t *loc, hid_t dxpl_id)
 {
-    H5O_t       *oh = NULL;     /* Object header */
-    H5O_t       *ret_value;     /* Return value */
+    H5O_t       *oh = NULL;             /* Object header */
+    H5O_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -2375,7 +2372,7 @@ const H5O_obj_class_t *
 H5O_obj_class(const H5O_loc_t *loc, hid_t dxpl_id)
 {
     H5O_t	*oh = NULL;                     /* Object header for location */
-    const H5O_obj_class_t *ret_value;           /* Return value */
+    const H5O_obj_class_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, loc->addr, NULL)
 
@@ -2412,7 +2409,7 @@ static const H5O_obj_class_t *
 H5O_obj_class_real(H5O_t *oh)
 {
     size_t	i;                      /* Local index variable */
-    const H5O_obj_class_t *ret_value;   /* Return value */
+    const H5O_obj_class_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -2454,7 +2451,7 @@ done:
 H5O_loc_t *
 H5O_get_loc(hid_t object_id)
 {
-    H5O_loc_t   *ret_value;     /* Return value */
+    H5O_loc_t   *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -3274,7 +3271,7 @@ H5O_visit(hid_t loc_id, const char *obj_name, H5_index_t idx_type,
     hbool_t     loc_found = FALSE;      /* Entry at 'name' found */
     H5O_info_t  oinfo;          /* Object info struct */
     hid_t       obj_id = (-1);  /* ID of object */
-    herr_t      ret_value;      /* Return value */
+    herr_t      ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5Oainfo.c b/src/H5Oainfo.c
index 4949b23..c5f692d 100644
--- a/src/H5Oainfo.c
+++ b/src/H5Oainfo.c
@@ -24,8 +24,9 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5A_PACKAGE		/*suppress error about including H5Apkg	  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#define H5A_FRIEND		/*suppress error about including H5Apkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Apkg.h"             /* Attributes				*/
@@ -110,7 +111,7 @@ H5O_ainfo_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *o
 {
     H5O_ainfo_t	*ainfo = NULL;  /* Attribute info */
     unsigned char flags;        /* Flags for encoding attribute info */
-    void        *ret_value;     /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -239,7 +240,7 @@ H5O_ainfo_copy(const void *_mesg, void *_dest)
 {
     const H5O_ainfo_t   *ainfo = (const H5O_ainfo_t *)_mesg;
     H5O_ainfo_t         *dest = (H5O_ainfo_t *) _dest;
-    void                *ret_value;     /* Return value */
+    void                *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -279,7 +280,7 @@ static size_t
 H5O_ainfo_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, const void *_mesg)
 {
     const H5O_ainfo_t   *ainfo = (const H5O_ainfo_t *)_mesg;
-    size_t ret_value;   /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -408,7 +409,7 @@ H5O_ainfo_copy_file(H5F_t *file_src, void *mesg_src, H5F_t *file_dst,
 {
     H5O_ainfo_t *ainfo_src = (H5O_ainfo_t *)mesg_src;
     H5O_ainfo_t *ainfo_dst = NULL;
-    void        *ret_value;             /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Oalloc.c b/src/H5Oalloc.c
index e9d4f85..3d930f0 100644
--- a/src/H5Oalloc.c
+++ b/src/H5Oalloc.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 /***********/
 /* Headers */
@@ -515,7 +516,7 @@ H5O_alloc_extend_chunk(H5F_t *f, hid_t dxpl_id, H5O_t *oh, unsigned chunkno,
     uint8_t     *old_image;     /* Old address of chunk's image in memory */
     size_t      old_size;       /* Old size of chunk */
     htri_t      was_extended;   /* If chunk can be extended */
-    size_t      extend_msg;     /* Index of null message to extend */
+    size_t      extend_msg = 0; /* Index of null message to extend */
     hbool_t     extended_msg = FALSE;   /* Whether an existing message was extended */
     uint8_t     new_size_flags = 0;     /* New chunk #0 size flags */
     hbool_t     adjust_size_flags = FALSE;      /* Whether to adjust the chunk #0 size flags */
@@ -1458,7 +1459,7 @@ H5O_move_msgs_forward(H5F_t *f, hid_t dxpl_id, H5O_t *oh)
     hbool_t curr_chk_dirtied = FALSE;  /* Flags for unprotecting curr chunk */
     hbool_t packed_msg;                 /* Flag to indicate that messages were packed */
     hbool_t did_packing = FALSE;        /* Whether any messages were packed */
-    htri_t ret_value; 	                /* Return value */
+    htri_t ret_value = FAIL; 	        /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1742,7 +1743,7 @@ H5O_merge_null(H5F_t *f, hid_t dxpl_id, H5O_t *oh)
 {
     hbool_t merged_msg;                 /* Flag to indicate that messages were merged */
     hbool_t did_merging = FALSE;        /* Whether any messages were merged */
-    htri_t ret_value; 	                /* Return value */
+    htri_t ret_value = FAIL; 	        /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1877,7 +1878,7 @@ H5O_remove_empty_chunks(H5F_t *f, hid_t dxpl_id, H5O_t *oh)
 {
     hbool_t deleted_chunk;              /* Whether to a chunk was deleted */
     hbool_t did_deleting = FALSE;       /* Whether any chunks were deleted */
-    htri_t ret_value; 	                /* Return value */
+    htri_t ret_value = FAIL; 	        /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Oattr.c b/src/H5Oattr.c
index fd7fcda..9cbcdc4 100644
--- a/src/H5Oattr.c
+++ b/src/H5Oattr.c
@@ -13,9 +13,9 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5A_PACKAGE             /*prevent warning from including H5Apkg   */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
-#define H5S_PACKAGE	        /*suppress error about including H5Spkg	  */
+#define H5A_FRIEND		/*suppress error about including H5Apkg   */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+#define H5S_FRIEND	        /*suppress error about including H5Spkg	  */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -129,7 +129,7 @@ H5O_attr_decode(H5F_t *f, hid_t dxpl_id, H5O_t *open_oh, unsigned H5_ATTR_UNUSED
     H5S_extent_t	*extent;	/*extent dimensionality information  */
     size_t		name_len;   	/*attribute name length */
     unsigned            flags = 0;      /* Attribute flags */
-    H5A_t		*ret_value;     /* Return value */
+    H5A_t		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -380,7 +380,7 @@ done:
 static void *
 H5O_attr_copy(const void *_src, void *_dst)
 {
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;            /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -496,10 +496,6 @@ H5O_attr_reset(void H5_ATTR_UNUSED *_mesg)
  * Programmer:	Quincey Koziol
  *              Thursday, November 18, 2004
  *
- * Modification:Raymond Lu
- *              4 June 2008
- *              Let this function call H5A_close in turn.
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
@@ -652,7 +648,7 @@ H5O_attr_copy_file(H5F_t *file_src, const H5O_msg_class_t H5_ATTR_UNUSED *mesg_t
     void *native_src, H5F_t *file_dst, hbool_t *recompute_size,
     H5O_copy_t *cpy_info, void H5_ATTR_UNUSED *udata, hid_t dxpl_id)
 {
-    void        *ret_value;             /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Oattribute.c b/src/H5Oattribute.c
index 52f414b..9b494a1 100644
--- a/src/H5Oattribute.c
+++ b/src/H5Oattribute.c
@@ -28,8 +28,9 @@
 /* Module Setup */
 /****************/
 
-#define H5A_PACKAGE		/*suppress error about including H5Apkg	  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#define H5A_FRIEND		/*suppress error about including H5Apkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 /***********/
 /* Headers */
@@ -474,7 +475,7 @@ H5O_attr_open_by_name(const H5O_loc_t *loc, const char *name, hid_t dxpl_id)
     H5A_t *exist_attr = NULL;           /* Existing opened attribute object */
     H5A_t *opened_attr = NULL;          /* Newly opened attribute object */
     htri_t found_open_attr = FALSE;     /* Whether opened object is found */
-    H5A_t *ret_value;                   /* Return value */
+    H5A_t *ret_value = NULL;            /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, loc->addr, NULL)
 
@@ -616,7 +617,7 @@ H5O_attr_open_by_idx(const H5O_loc_t *loc, H5_index_t idx_type,
     H5A_t *exist_attr = NULL;           /* Existing opened attribute object */
     H5A_t *opened_attr = NULL;          /* Newly opened attribute object */
     htri_t found_open_attr = FALSE;     /* Whether opened object is found */
-    H5A_t *ret_value;                   /* Return value */
+    H5A_t *ret_value = NULL;            /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1272,7 +1273,7 @@ H5O_attr_iterate_real(hid_t loc_id, const H5O_loc_t *loc, hid_t dxpl_id,
     H5O_t *oh = NULL;                   /* Pointer to actual object header */
     H5O_ainfo_t ainfo;                  /* Attribute information for object */
     H5A_attr_table_t atable = {0, NULL};        /* Table of attributes */
-    herr_t ret_value;                   /* Return value */
+    herr_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, loc->addr, FAIL)
 
@@ -1357,7 +1358,7 @@ H5O_attr_iterate(hid_t loc_id, hid_t dxpl_id,
     hsize_t *last_attr, const H5A_attr_iter_op_t *attr_op, void *op_data)
 {
     H5G_loc_t loc;	        /* Object location */
-    herr_t ret_value;           /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1837,7 +1838,7 @@ H5O_attr_exists(const H5O_loc_t *loc, const char *name, hid_t dxpl_id)
 {
     H5O_t *oh = NULL;           /* Pointer to actual object header */
     H5O_ainfo_t ainfo;          /* Attribute information for object */
-    htri_t ret_value;           /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, loc->addr, FAIL)
 
@@ -1992,7 +1993,7 @@ H5O_attr_count(const H5O_loc_t *loc, hid_t dxpl_id)
 {
     H5O_t *oh = NULL;           /* Pointer to actual object header */
     hsize_t nattrs;             /* Number of attributes */
-    int ret_value;              /* Return value */
+    int ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Obogus.c b/src/H5Obogus.c
index b368ab6..de205f6 100644
--- a/src/H5Obogus.c
+++ b/src/H5Obogus.c
@@ -28,7 +28,8 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
diff --git a/src/H5Obtreek.c b/src/H5Obtreek.c
index 802f23a..ac6fe37 100644
--- a/src/H5Obtreek.c
+++ b/src/H5Obtreek.c
@@ -21,7 +21,8 @@
  *              information in the superblock extension.
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -83,7 +84,7 @@ H5O_btreek_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
     H5O_btreek_t	*mesg;          /* Native message */
-    void                *ret_value;     /* Return value */
+    void		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -165,7 +166,7 @@ H5O_btreek_copy(const void *_mesg, void *_dest)
 {
     const H5O_btreek_t	*mesg = (const H5O_btreek_t *)_mesg;
     H5O_btreek_t	*dest = (H5O_btreek_t *)_dest;
-    void		*ret_value;
+    void		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Ocache.c b/src/H5Ocache.c
index 3c64131..945d12e 100644
--- a/src/H5Ocache.c
+++ b/src/H5Ocache.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
 
 
 /***********/
@@ -741,9 +741,9 @@ static void *
 H5O__cache_chk_deserialize(const void *image, size_t len, void *_udata,
     hbool_t *dirty)
 {
-    H5O_chunk_proxy_t  *chk_proxy = NULL;     /* Chunk proxy object */
+    H5O_chunk_proxy_t  *chk_proxy = NULL;       /* Chunk proxy object */
     H5O_chk_cache_ud_t *udata = (H5O_chk_cache_ud_t *)_udata;   /* User data for callback */
-    void *              ret_value;      /* Return value */
+    void		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5Ochunk.c b/src/H5Ochunk.c
index bb82ad1..8abe660 100644
--- a/src/H5Ochunk.c
+++ b/src/H5Ochunk.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 /***********/
 /* Headers */
@@ -149,7 +150,7 @@ H5O_chunk_proxy_t *
 H5O_chunk_protect(H5F_t *f, hid_t dxpl_id, H5O_t *oh, unsigned idx)
 {
     H5O_chunk_proxy_t *chk_proxy = NULL;        /* Proxy for protected chunk */
-    H5O_chunk_proxy_t *ret_value;               /* Return value */
+    H5O_chunk_proxy_t *ret_value = NULL;        /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, oh->cache_info.addr, NULL)
 
diff --git a/src/H5Ocont.c b/src/H5Ocont.c
index a139654..63002c5 100644
--- a/src/H5Ocont.c
+++ b/src/H5Ocont.c
@@ -27,7 +27,8 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -94,7 +95,7 @@ H5O_cont_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *op
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
     H5O_cont_t             *cont = NULL;
-    void                   *ret_value;
+    void                   *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -174,7 +175,7 @@ H5O_cont_encode(H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, uint8_t *p, con
 static size_t
 H5O_cont_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, const void H5_ATTR_UNUSED *_mesg)
 {
-    size_t ret_value;   /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Ocopy.c b/src/H5Ocopy.c
index 66322da..e641d70 100644
--- a/src/H5Ocopy.c
+++ b/src/H5Ocopy.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 /***********/
 /* Headers */
@@ -1084,7 +1085,7 @@ H5O_copy_header(const H5O_loc_t *oloc_src, H5O_loc_t *oloc_dst /*out */,
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get object copy flag")
 
     /* Retrieve the marge committed datatype list */
-    if(H5P_get(ocpy_plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &dt_list) < 0)
+    if(H5P_peek(ocpy_plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &dt_list) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get merge committed datatype list")
 
     /* Get callback info */
diff --git a/src/H5Odbg.c b/src/H5Odbg.c
index bd789c5..d9d4b8b 100644
--- a/src/H5Odbg.c
+++ b/src/H5Odbg.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 /***********/
 /* Headers */
@@ -247,8 +248,8 @@ H5O_assert(const H5O_t *oh)
 herr_t
 H5O_debug_id(unsigned type_id, H5F_t *f, hid_t dxpl_id, const void *mesg, FILE *stream, int indent, int fwidth)
 {
-    const H5O_msg_class_t *type;            /* Actual H5O class type for the ID */
-    herr_t      ret_value;       /* Return value */
+    const H5O_msg_class_t *type;        /* Actual H5O class type for the ID */
+    herr_t      ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5Odrvinfo.c b/src/H5Odrvinfo.c
index 73cb7cc..2fdf494 100644
--- a/src/H5Odrvinfo.c
+++ b/src/H5Odrvinfo.c
@@ -21,7 +21,8 @@
  *              in the superblock extension.
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -84,7 +85,7 @@ H5O_drvinfo_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
     H5O_drvinfo_t	*mesg;          /* Native message */
-    void                *ret_value;     /* Return value */
+    void		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -181,7 +182,7 @@ H5O_drvinfo_copy(const void *_mesg, void *_dest)
 {
     const H5O_drvinfo_t	*mesg = (const H5O_drvinfo_t *)_mesg;
     H5O_drvinfo_t	*dest = (H5O_drvinfo_t *)_dest;
-    void		*ret_value;
+    void		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -228,7 +229,7 @@ static size_t
 H5O_drvinfo_size(const H5F_t H5_ATTR_UNUSED *f, hbool_t H5_ATTR_UNUSED disable_shared, const void *_mesg)
 {
     const H5O_drvinfo_t *mesg = (const H5O_drvinfo_t *)_mesg;
-    size_t                   ret_value;
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Odtype.c b/src/H5Odtype.c
index 622a18e..cee6e1e 100644
--- a/src/H5Odtype.c
+++ b/src/H5Odtype.c
@@ -13,8 +13,9 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
-#define H5T_PACKAGE		/*prevent warning from including H5Tpkg   */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+#define H5T_FRIEND		/*prevent warning from including H5Tpkg   */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Dprivate.h"		/* Datasets				*/
@@ -35,7 +36,7 @@ static void *H5O_dtype_decode(H5F_t *f, hid_t dxpl_id, H5O_t *open_oh,
 static void *H5O_dtype_copy(const void *_mesg, void *_dest);
 static size_t H5O_dtype_size(const H5F_t *f, const void *_mesg);
 static herr_t H5O_dtype_reset(void *_mesg);
-static herr_t H5O_dtype_free(void *_mesg);
+static herr_t H5O__dtype_free(void *_mesg);
 static herr_t H5O_dtype_set_share(void *_mesg, const H5O_shared_t *sh);
 static htri_t H5O_dtype_can_share(const void *_mesg);
 static herr_t H5O_dtype_pre_copy_file(H5F_t *file_src, const void *mesg_src,
@@ -101,7 +102,7 @@ const H5O_msg_class_t H5O_MSG_DTYPE[1] = {{
     H5O_dtype_copy,		/* copy the native value	*/
     H5O_dtype_shared_size,	/* size of raw message		*/
     H5O_dtype_reset,		/* reset method			*/
-    H5O_dtype_free,		/* free method			*/
+    H5O__dtype_free,		/* free method			*/
     H5O_dtype_shared_delete,	/* file delete method		*/
     H5O_dtype_shared_link,	/* link method			*/
     H5O_dtype_set_share,	/* set share method		*/
@@ -1093,7 +1094,7 @@ H5O_dtype_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *o
     unsigned *ioflags/*in,out*/, const uint8_t *p)
 {
     H5T_t	*dt = NULL;
-    void        *ret_value;     /* Return value */
+    void        *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1175,9 +1176,9 @@ done:
 static void *
 H5O_dtype_copy(const void *_src, void *_dst)
 {
-    const H5T_t		   *src = (const H5T_t *) _src;
-    H5T_t		   *dst;
-    void 		   *ret_value;  /* Return value */
+    const H5T_t	*src = (const H5T_t *) _src;
+    H5T_t	*dst;
+    void        *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1224,7 +1225,7 @@ H5O_dtype_size(const H5F_t *f, const void *_mesg)
 {
     const H5T_t	*dt = (const H5T_t *)_mesg;
     unsigned	u;                      /* Local index variable */
-    size_t	ret_value;
+    size_t	ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1369,31 +1370,34 @@ H5O_dtype_reset(void *_mesg)
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5O_dtype_free
+ * Function:	H5O__dtype_free
  *
- * Purpose:	Free's the message
+ * Purpose:	Frees the message
  *
  * Return:	Non-negative on success/Negative on failure
  *
  * Programmer:	Quincey Koziol
  *              Thursday, March 30, 2000
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5O_dtype_free(void *mesg)
+H5O__dtype_free(void *mesg)
 {
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    herr_t ret_value = SUCCEED;         /* Return value */
 
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
     HDassert(mesg);
 
-    ((H5T_t *) mesg)->shared = H5FL_FREE(H5T_shared_t, ((H5T_t *) mesg)->shared);
-    mesg = H5FL_FREE(H5T_t, mesg);
+    /* Release the datatype */
+    if(H5T_close((H5T_t *)mesg) < 0)
+        HGOTO_ERROR(H5E_OHDR, H5E_CANTFREE, FAIL, "unable to free datatype")
 
-    FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5O_dtype_free() */
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5O__dtype_free() */
 
 
 /*-------------------------------------------------------------------------
@@ -1562,7 +1566,7 @@ H5O_dtype_copy_file(H5F_t H5_ATTR_UNUSED *file_src, const H5O_msg_class_t *mesg_
     H5O_copy_t H5_ATTR_UNUSED *cpy_info, void H5_ATTR_UNUSED *udata, hid_t H5_ATTR_UNUSED dxpl_id)
 {
     H5T_t *dst_mesg;            /* Destination datatype */
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Oefl.c b/src/H5Oefl.c
index a7ce31a..25ab753 100644
--- a/src/H5Oefl.c
+++ b/src/H5Oefl.c
@@ -18,7 +18,7 @@
  *	       Tuesday, November 25, 1997
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -96,8 +96,8 @@ H5O_efl_decode(H5F_t *f, hid_t dxpl_id, H5O_t H5_ATTR_UNUSED *open_oh,
     int			version;
     const char		*s = NULL;
     H5HL_t              *heap;
-    size_t		u;      /* Local index variable */
-    void *ret_value;            /* Return value */
+    size_t		u;                      /* Local index variable */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -258,64 +258,47 @@ H5O_efl_copy(const void *_mesg, void *_dest)
 {
     const H5O_efl_t	*mesg = (const H5O_efl_t *) _mesg;
     H5O_efl_t		*dest = (H5O_efl_t *) _dest;
-    size_t		u;              /* Local index variable */
-    void                *ret_value;     /* Return value */
+    size_t		u;                      /* Local index variable */
+    hbool_t             slot_allocated = FALSE; /* Flag to indicate that dynamic allocation has begun */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
     /* check args */
     HDassert(mesg);
-    if(!dest) {
-	if(NULL == (dest = (H5O_efl_t *)H5MM_calloc(sizeof(H5O_efl_t))))
-	    HGOTO_ERROR(H5E_OHDR, H5E_CANTALLOC, NULL, "can't allocate efl message")
-        if(NULL == (dest->slot = (H5O_efl_entry_t *)H5MM_calloc(mesg->nalloc * sizeof(H5O_efl_entry_t))))
-	    HGOTO_ERROR(H5E_OHDR, H5E_CANTALLOC, NULL, "can't allocate efl message slots")
-    } /* end if */
-    else if(dest->nalloc < mesg->nalloc) {
-        H5O_efl_entry_t *temp_slot;     /* Temporary pointer to new slot information */
 
-        /* Allocate new 'slot' information */
-        if(NULL == (temp_slot = (H5O_efl_entry_t *)H5MM_calloc(mesg->nalloc * sizeof(H5O_efl_entry_t))))
-            HGOTO_ERROR(H5E_OHDR, H5E_CANTALLOC, NULL, "can't allocate efl message slots")
+    /* Allocate destination message, if necessary */
+    if(!dest && NULL == (dest = (H5O_efl_t *)H5MM_calloc(sizeof(H5O_efl_t))))
+        HGOTO_ERROR(H5E_OHDR, H5E_CANTALLOC, NULL, "can't allocate efl message")
 
-        /* Release old 'slot' information */
-        for(u = 0; u < dest->nused; u++)
-            dest->slot[u].name = (char *)H5MM_xfree(dest->slot[u].name);
-        dest->slot = (H5O_efl_entry_t *)H5MM_xfree(dest->slot);
+    /* copy */
+    *dest = *mesg;
 
-        /* Point to new 'slot' information */
-        dest->slot = temp_slot;
+    /* Deep copy allocated information */
+    if(dest->nalloc > 0) {
+        if(NULL == (dest->slot = (H5O_efl_entry_t *)H5MM_calloc(dest->nalloc * sizeof(H5O_efl_entry_t))))
+            HGOTO_ERROR(H5E_OHDR, H5E_CANTALLOC, NULL, "can't allocate efl message slots")
+        slot_allocated = TRUE;
+        for(u = 0; u < mesg->nused; u++) {
+            dest->slot[u] = mesg->slot[u];
+            if(NULL == (dest->slot[u].name = H5MM_xstrdup(mesg->slot[u].name)))
+                HGOTO_ERROR(H5E_OHDR, H5E_CANTALLOC, NULL, "can't allocate efl message slot name")
+        } /* end for */
     } /* end if */
-    else {
-        /* Release old 'slot' information */
-        for(u = 0; u < dest->nused; u++)
-            dest->slot[u].name = (char *)H5MM_xfree(dest->slot[u].name);
-    } /* end else */
-    dest->heap_addr = mesg->heap_addr;
-    dest->nalloc = mesg->nalloc;
-    dest->nused = mesg->nused;
-
-    for(u = 0; u < mesg->nused; u++) {
-	dest->slot[u] = mesg->slot[u];
-	if(NULL == (dest->slot[u].name = H5MM_xstrdup(mesg->slot[u].name)))
-            HGOTO_ERROR(H5E_OHDR, H5E_CANTALLOC, NULL, "can't allocate efl message slot name")
-    } /* end for */
 
     /* Set return value */
     ret_value = dest;
 
 done:
     if(NULL == ret_value) {
-        if(dest && NULL == _dest) {
-            if(dest->slot) {
-                for(u = 0; u < mesg->nused; u++) {
-                    if(dest->slot[u].name != NULL && dest->slot[u].name != mesg->slot[u].name)
-                        dest->slot[u].name = (char *)H5MM_xfree(dest->slot[u].name);
-                } /* end for */
-                dest->slot = (H5O_efl_entry_t *)H5MM_xfree(dest->slot);
-            } /* end if */
-            dest = (H5O_efl_t *)H5MM_xfree(dest);
+        if(slot_allocated) {
+            for(u = 0; u < dest->nused; u++)
+                if(dest->slot[u].name != NULL && dest->slot[u].name != mesg->slot[u].name)
+                    dest->slot[u].name = (char *)H5MM_xfree(dest->slot[u].name);
+            dest->slot = (H5O_efl_entry_t *)H5MM_xfree(dest->slot);
         } /* end if */
+        if(NULL == _dest)
+            dest = (H5O_efl_t *)H5MM_xfree(dest);
     } /* end if */
 
     FUNC_LEAVE_NOAPI(ret_value)
@@ -389,8 +372,10 @@ H5O_efl_reset(void *_mesg)
 
     /* reset */
     if(mesg->slot) {
-        for(u = 0; u < mesg->nused; u++)
+        for(u = 0; u < mesg->nused; u++) {
             mesg->slot[u].name = (char *)H5MM_xfree(mesg->slot[u].name);
+            mesg->slot[u].name_offset = 0;
+        } /* end for */
         mesg->slot = (H5O_efl_entry_t *)H5MM_xfree(mesg->slot);
     } /* end if */
     mesg->heap_addr = HADDR_UNDEF;
@@ -460,9 +445,9 @@ H5O_efl_copy_file(H5F_t H5_ATTR_UNUSED *file_src, void *mesg_src, H5F_t *file_ds
 {
     H5O_efl_t   *efl_src = (H5O_efl_t *) mesg_src;
     H5O_efl_t   *efl_dst = NULL;
-    H5HL_t      *heap = NULL;                           /* Pointer to local heap for EFL file names */
+    H5HL_t      *heap = NULL;                   /* Pointer to local heap for EFL file names */
     size_t      idx, size, name_offset, heap_size;
-    void        *ret_value;          /* Return value */
+    void        *ret_value = NULL;              /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, H5AC__COPIED_TAG, NULL)
 
diff --git a/src/H5Ofill.c b/src/H5Ofill.c
index 3bd1e84..ebcb5d3 100644
--- a/src/H5Ofill.c
+++ b/src/H5Ofill.c
@@ -20,7 +20,8 @@
  *		uninitialized data points of a dataset.
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Dprivate.h"		/* Datasets				*/
@@ -188,7 +189,7 @@ H5O_fill_new_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
     H5O_fill_t	*fill = NULL;
-    void	*ret_value;
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -301,8 +302,8 @@ static void *
 H5O_fill_old_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *open_oh,
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
-    H5O_fill_t *fill = NULL;		/* Decoded fill value message */
-    void *ret_value;                    /* Return value */
+    H5O_fill_t *fill = NULL;	/* Decoded fill value message */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -494,7 +495,7 @@ H5O_fill_copy(const void *_src, void *_dst)
 {
     const H5O_fill_t	*src = (const H5O_fill_t *)_src;
     H5O_fill_t		*dst = (H5O_fill_t *)_dst;
-    void		*ret_value;
+    void		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -611,7 +612,7 @@ static size_t
 H5O_fill_new_size(const H5F_t H5_ATTR_UNUSED *f, const void *_fill)
 {
     const H5O_fill_t	*fill = (const H5O_fill_t *)_fill;
-    size_t		ret_value;
+    size_t		ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Ofsinfo.c b/src/H5Ofsinfo.c
index 180ebe8..1712857 100644
--- a/src/H5Ofsinfo.c
+++ b/src/H5Ofsinfo.c
@@ -24,7 +24,8 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5O_PACKAGE		/* suppress error about including H5Opkg	*/
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions	*/
 #include "H5Eprivate.h"		/* Error handling	*/
@@ -89,7 +90,7 @@ H5O_fsinfo_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *
 {
     H5O_fsinfo_t	*fsinfo = NULL; /* free-space manager info */
     H5FD_mem_t 		type;		/* Memory type for iteration */
-    void        	*ret_value;  	/* Return value */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -183,9 +184,9 @@ H5O_fsinfo_encode(H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, uint8_t *p, c
 static void *
 H5O_fsinfo_copy(const void *_mesg, void *_dest)
 {
-    const H5O_fsinfo_t   *fsinfo = (const H5O_fsinfo_t *)_mesg;
-    H5O_fsinfo_t         *dest = (H5O_fsinfo_t *) _dest;
-    void                *ret_value;     /* Return value */
+    const H5O_fsinfo_t  *fsinfo = (const H5O_fsinfo_t *)_mesg;
+    H5O_fsinfo_t        *dest = (H5O_fsinfo_t *) _dest;
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -224,7 +225,7 @@ H5O_fsinfo_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, const voi
 {
     const H5O_fsinfo_t   *fsinfo = (const H5O_fsinfo_t *)_mesg;
     size_t fs_addr_size = 0;
-    size_t ret_value;   /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Oginfo.c b/src/H5Oginfo.c
index 5519021..9cd0dc1 100644
--- a/src/H5Oginfo.c
+++ b/src/H5Oginfo.c
@@ -24,7 +24,8 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -100,7 +101,7 @@ H5O_ginfo_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5
 {
     H5O_ginfo_t         *ginfo = NULL;  /* Pointer to group information message */
     unsigned char       flags;          /* Flags for encoding group info */
-    void                *ret_value;     /* Return value */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -224,7 +225,7 @@ H5O_ginfo_copy(const void *_mesg, void *_dest)
 {
     const H5O_ginfo_t   *ginfo = (const H5O_ginfo_t *)_mesg;
     H5O_ginfo_t         *dest = (H5O_ginfo_t *)_dest;
-    void                *ret_value;     /* Return value */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -265,7 +266,7 @@ static size_t
 H5O_ginfo_size(const H5F_t H5_ATTR_UNUSED *f, hbool_t H5_ATTR_UNUSED disable_shared, const void *_mesg)
 {
     const H5O_ginfo_t   *ginfo = (const H5O_ginfo_t *)_mesg;
-    size_t ret_value;   /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Olayout.c b/src/H5Olayout.c
index 81ef061..daffe48 100644
--- a/src/H5Olayout.c
+++ b/src/H5Olayout.c
@@ -19,8 +19,9 @@
  * Purpose:     Messages related to data layout.
  */
 
-#define H5D_PACKAGE		/*suppress error about including H5Dpkg	  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#define H5D_FRIEND		/*suppress error about including H5Dpkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Dpkg.h"		/* Dataset functions			*/
@@ -105,7 +106,7 @@ H5O_layout_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *
     H5O_layout_t           *mesg = NULL;
     uint8_t                *heap_block = NULL;
     unsigned               u;
-    void                   *ret_value;          /* Return value */
+    void                   *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -635,7 +636,7 @@ H5O_layout_copy(const void *_mesg, void *_dest)
 {
     const H5O_layout_t     *mesg = (const H5O_layout_t *) _mesg;
     H5O_layout_t           *dest = (H5O_layout_t *) _dest;
-    void                   *ret_value;          /* Return value */
+    void                   *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -654,6 +655,9 @@ H5O_layout_copy(const void *_mesg, void *_dest)
         case H5D_COMPACT:
             /* Deep copy the buffer for compact datasets also */
             if(mesg->storage.u.compact.size > 0) {
+                /* Sanity check */
+                HDassert(mesg->storage.u.compact.buf);
+
                 /* Allocate memory for the raw data */
                 if(NULL == (dest->storage.u.compact.buf = H5MM_malloc(dest->storage.u.compact.size)))
                     HGOTO_ERROR(H5E_OHDR, H5E_NOSPACE, NULL, "unable to allocate memory for compact dataset")
@@ -716,7 +720,7 @@ static size_t
 H5O_layout_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, const void *_mesg)
 {
     const H5O_layout_t     *mesg = (const H5O_layout_t *) _mesg;
-    size_t                  ret_value;
+    size_t                  ret_value = 0;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -886,8 +890,8 @@ H5O_layout_copy_file(H5F_t *file_src, void *mesg_src, H5F_t *file_dst,
     H5D_copy_file_ud_t *udata = (H5D_copy_file_ud_t *)_udata;   /* Dataset copying user data */
     H5O_layout_t       *layout_src = (H5O_layout_t *) mesg_src;
     H5O_layout_t       *layout_dst = NULL;
-    hbool_t             copied = FALSE;                         /* Whether the data was copied */
-    void               *ret_value;                              /* Return value */
+    hbool_t             copied = FALSE;         /* Whether the data was copied */
+    void               *ret_value = NULL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Olinfo.c b/src/H5Olinfo.c
index a0b6e4a..62e63d4 100644
--- a/src/H5Olinfo.c
+++ b/src/H5Olinfo.c
@@ -24,9 +24,10 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
-#define H5L_PACKAGE		/*suppress error about including H5Lpkg	  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg   */
+#define H5L_FRIEND		/*suppress error about including H5Lpkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -119,7 +120,7 @@ H5O_linfo_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *o
 {
     H5O_linfo_t	*linfo = NULL;  /* Link info */
     unsigned char index_flags;  /* Flags for encoding link index info */
-    void        *ret_value;     /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -249,7 +250,7 @@ H5O_linfo_copy(const void *_mesg, void *_dest)
 {
     const H5O_linfo_t   *linfo = (const H5O_linfo_t *)_mesg;
     H5O_linfo_t         *dest = (H5O_linfo_t *) _dest;
-    void                *ret_value;     /* Return value */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -289,7 +290,7 @@ static size_t
 H5O_linfo_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, const void *_mesg)
 {
     const H5O_linfo_t   *linfo = (const H5O_linfo_t *)_mesg;
-    size_t ret_value;   /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -383,10 +384,10 @@ H5O_linfo_copy_file(H5F_t H5_ATTR_UNUSED *file_src, void *native_src, H5F_t *fil
     hbool_t H5_ATTR_UNUSED *recompute_size, unsigned H5_ATTR_UNUSED *mesg_flags,
     H5O_copy_t *cpy_info, void *_udata, hid_t dxpl_id)
 {
-    H5O_linfo_t          *linfo_src = (H5O_linfo_t *) native_src;
-    H5O_linfo_t          *linfo_dst = NULL;
+    H5O_linfo_t         *linfo_src = (H5O_linfo_t *) native_src;
+    H5O_linfo_t         *linfo_dst = NULL;
     H5G_copy_file_ud_t *udata = (H5G_copy_file_ud_t *) _udata;
-    void                 *ret_value;          /* Return value */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, H5AC__COPIED_TAG, NULL)
 
diff --git a/src/H5Olink.c b/src/H5Olink.c
index 7e70196..fd4ee88 100644
--- a/src/H5Olink.c
+++ b/src/H5Olink.c
@@ -24,9 +24,10 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
-#define H5L_PACKAGE		/*suppress error about including H5Lpkg	  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg   */
+#define H5L_FRIEND		/*suppress error about including H5Lpkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -124,7 +125,7 @@ H5O_link_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *op
     H5O_link_t          *lnk = NULL;    /* Pointer to link message */
     size_t              len = 0;        /* Length of a string in the message */
     unsigned char       link_flags;     /* Flags for encoding link info */
-    void                *ret_value;     /* Return value */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -411,7 +412,7 @@ H5O_link_copy(const void *_mesg, void *_dest)
 {
     const H5O_link_t    *lnk = (const H5O_link_t *) _mesg;
     H5O_link_t          *dest = (H5O_link_t *) _dest;
-    void                *ret_value;     /* Return value */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -478,9 +479,9 @@ static size_t
 H5O_link_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, const void *_mesg)
 {
     const H5O_link_t *lnk = (const H5O_link_t *)_mesg;
-    uint64_t name_len;    /* Length of name */
-    size_t name_size;   /* Size of encoded name length */
-    size_t ret_value;   /* Return value */
+    uint64_t name_len;          /* Length of name */
+    size_t name_size;           /* Size of encoded name length */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -727,7 +728,7 @@ H5O_link_copy_file(H5F_t H5_ATTR_UNUSED *file_src, void *native_src, H5F_t H5_AT
     H5O_copy_t H5_ATTR_UNUSED *cpy_info, void H5_ATTR_UNUSED *udata, hid_t H5_ATTR_UNUSED dxpl_id)
 {
     H5O_link_t  *link_src = (H5O_link_t *)native_src;
-    void        *ret_value;          /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Omessage.c b/src/H5Omessage.c
index c2756ea..d42896c 100644
--- a/src/H5Omessage.c
+++ b/src/H5Omessage.c
@@ -28,7 +28,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 /***********/
 /* Headers */
@@ -465,7 +466,7 @@ H5O_msg_read(const H5O_loc_t *loc, unsigned type_id, void *mesg,
     hid_t dxpl_id)
 {
     H5O_t *oh = NULL;                   /* Object header to use */
-    void *ret_value;                    /* Return value */
+    void *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, loc->addr, NULL)
 
@@ -652,7 +653,7 @@ void *
 H5O_msg_free(unsigned type_id, void *mesg)
 {
     const H5O_msg_class_t *type;            /* Actual H5O class type for the ID */
-    void * ret_value;                   /* Return value */
+    void *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -749,7 +750,7 @@ void *
 H5O_msg_copy(unsigned type_id, const void *mesg, void *dst)
 {
     const H5O_msg_class_t *type;            /* Actual H5O class type for the ID */
-    void	*ret_value;             /* Return value */
+    void *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -789,7 +790,7 @@ H5O_msg_count(const H5O_loc_t *loc, unsigned type_id, hid_t dxpl_id)
     H5O_t *oh = NULL;           /* Object header to operate on */
     const H5O_msg_class_t *type;        /* Actual H5O class type for the ID */
     unsigned msg_count;         /* Message count */
-    int	ret_value;              /* Return value */
+    int	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -836,7 +837,7 @@ unsigned
 H5O_msg_count_real(const H5O_t *oh, const H5O_msg_class_t *type)
 {
     unsigned u;                 /* Local index variable */
-    unsigned ret_value;         /* Return value */
+    unsigned ret_value = 0;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -875,7 +876,7 @@ htri_t
 H5O_msg_exists(const H5O_loc_t *loc, unsigned type_id, hid_t dxpl_id)
 {
     H5O_t	*oh = NULL;             /* Object header for location */
-    htri_t      ret_value;              /* Return value */
+    htri_t      ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI_TAG(dxpl_id, loc->addr, FAIL)
 
@@ -966,8 +967,8 @@ H5O_msg_remove(const H5O_loc_t *loc, unsigned type_id, int sequence, hbool_t adj
     hid_t dxpl_id)
 {
     H5O_t *oh = NULL;                   /* Pointer to actual object header */
-    const H5O_msg_class_t *type;            /* Actual H5O class type for the ID */
-    herr_t      ret_value;              /* Return value */
+    const H5O_msg_class_t *type;        /* Actual H5O class type for the ID */
+    herr_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1018,8 +1019,8 @@ H5O_msg_remove_op(const H5O_loc_t *loc, unsigned type_id, int sequence,
     H5O_operator_t op, void *op_data, hbool_t adj_link, hid_t dxpl_id)
 {
     H5O_t *oh = NULL;                   /* Pointer to actual object header */
-    const H5O_msg_class_t *type;            /* Actual H5O class type for the ID */
-    herr_t      ret_value;              /* Return value */
+    const H5O_msg_class_t *type;        /* Actual H5O class type for the ID */
+    herr_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1210,7 +1211,7 @@ H5O_msg_iterate(const H5O_loc_t *loc, unsigned type_id,
 {
     H5O_t *oh = NULL;               /* Pointer to actual object header */
     const H5O_msg_class_t *type;    /* Actual H5O class type for the ID */
-    herr_t ret_value;               /* Return value */
+    herr_t ret_value = FAIL;        /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1359,7 +1360,7 @@ H5O_msg_raw_size(const H5F_t *f, unsigned type_id, hbool_t disable_shared,
     const void *mesg)
 {
     const H5O_msg_class_t *type;        /* Actual H5O class type for the ID */
-    size_t ret_value;                   /* Return value */
+    size_t ret_value = 0;               /* Return value */
 
     FUNC_ENTER_NOAPI(0)
 
@@ -1404,7 +1405,7 @@ H5O_msg_size_f(const H5F_t *f, hid_t ocpl_id, unsigned type_id,
     const H5O_msg_class_t *type; /* Actual H5O class type for the ID */
     H5P_genplist_t *ocpl;       /* Object Creation Property list */
     uint8_t oh_flags;           /* Object header status flags */
-    size_t ret_value;           /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI(0)
 
@@ -1466,7 +1467,7 @@ H5O_msg_size_oh(const H5F_t *f, const H5O_t *oh, unsigned type_id,
     const void *mesg, size_t extra_raw)
 {
     const H5O_msg_class_t *type; /* Actual H5O class type for the ID */
-    size_t ret_value;           /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI(0)
 
@@ -1517,7 +1518,7 @@ htri_t
 H5O_msg_can_share(unsigned type_id, const void *mesg)
 {
     const H5O_msg_class_t *type;    /* Actual H5O class type for the ID */
-    htri_t ret_value;
+    htri_t ret_value = FAIL;        /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1564,7 +1565,7 @@ htri_t
 H5O_msg_can_share_in_ohdr(unsigned type_id)
 {
     const H5O_msg_class_t *type;    /* Actual H5O class type for the ID */
-    htri_t ret_value;
+    htri_t ret_value = FAIL;        /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1602,7 +1603,7 @@ htri_t
 H5O_msg_is_shared(unsigned type_id, const void *mesg)
 {
     const H5O_msg_class_t *type;    /* Actual H5O class type for the ID */
-    htri_t ret_value;
+    htri_t ret_value = FAIL;        /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1816,8 +1817,8 @@ H5O_msg_decode(H5F_t *f, hid_t dxpl_id, H5O_t *open_oh, unsigned type_id,
     const unsigned char *buf)
 {
     const H5O_msg_class_t   *type;      /* Actual H5O class type for the ID */
-    void *ret_value;                    /* Return value */
     unsigned ioflags = 0;               /* Flags for decode routine */
+    void *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1859,7 +1860,7 @@ H5O_msg_copy_file(const H5O_msg_class_t *type, H5F_t *file_src,
     void *native_src, H5F_t *file_dst, hbool_t *recompute_size,
     unsigned *mesg_flags, H5O_copy_t *cpy_info, void *udata, hid_t dxpl_id)
 {
-    void        *ret_value;
+    void *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -2047,7 +2048,7 @@ H5O_msg_delete(H5F_t *f, hid_t dxpl_id, H5O_t *open_oh, unsigned type_id,
     const H5O_msg_class_t   *type;      /* Actual H5O class type for the ID */
     herr_t ret_value = SUCCEED;                    /* Return value */
 
-    FUNC_ENTER_NOAPI(NULL)
+    FUNC_ENTER_NOAPI(FAIL)
 
     /* check args */
     HDassert(f);
@@ -2276,7 +2277,7 @@ H5O_msg_get_chunkno(const H5O_loc_t *loc, unsigned type_id, hid_t dxpl_id)
     const H5O_msg_class_t *type;        /* Actual H5O class type for the ID */
     H5O_mesg_t *idx_msg;                /* Pointer to message to modify */
     unsigned idx;                       /* Index of message to modify */
-    int ret_value;                      /* Return value */
+    int ret_value = -1;                 /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5Omodule.h b/src/H5Omodule.h
new file mode 100644
index 0000000..a8f1301
--- /dev/null
+++ b/src/H5Omodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5O package.  Including this header means that the source file
+ *		is part of the H5O package.
+ */
+#ifndef _H5Omodule_H
+#define _H5Omodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5O_MODULE
+#define H5_MY_PKG       H5O
+#define H5_MY_PKG_ERR   H5E_OHDR
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Omodule_H */
+
diff --git a/src/H5Omtime.c b/src/H5Omtime.c
index 63ba152..622d57d 100644
--- a/src/H5Omtime.c
+++ b/src/H5Omtime.c
@@ -19,7 +19,8 @@
  * Purpose:	The object modification time message.
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -126,8 +127,8 @@ H5O_mtime_new_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
     time_t	*mesg;
-    uint32_t    tmp_time;       /* Temporary copy of the time */
-    void        *ret_value;     /* Return value */
+    uint32_t    tmp_time;               /* Temporary copy of the time */
+    void        *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -184,7 +185,7 @@ H5O_mtime_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5
     time_t	*mesg, the_time;
     int	i;
     struct tm	tm;
-    void        *ret_value;     /* Return value */
+    void        *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -352,7 +353,7 @@ H5O_mtime_copy(const void *_mesg, void *_dest)
 {
     const time_t	*mesg = (const time_t *) _mesg;
     time_t		*dest = (time_t *) _dest;
-    void        *ret_value;     /* Return value */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Oname.c b/src/H5Oname.c
index 2cd9e72..6c4f76f 100644
--- a/src/H5Oname.c
+++ b/src/H5Oname.c
@@ -24,7 +24,8 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -88,7 +89,7 @@ H5O_name_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
     H5O_name_t          *mesg;
-    void                *ret_value;     /* Return value */
+    void                *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -170,9 +171,9 @@ H5O_name_encode(H5F_t H5_ATTR_UNUSED *f, hbool_t H5_ATTR_UNUSED disable_shared,
 static void *
 H5O_name_copy(const void *_mesg, void *_dest)
 {
-    const H5O_name_t       *mesg = (const H5O_name_t *) _mesg;
-    H5O_name_t             *dest = (H5O_name_t *) _dest;
-    void                *ret_value;     /* Return value */
+    const H5O_name_t    *mesg = (const H5O_name_t *) _mesg;
+    H5O_name_t          *dest = (H5O_name_t *) _dest;
+    void                *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -223,7 +224,7 @@ static size_t
 H5O_name_size(const H5F_t H5_ATTR_UNUSED *f, hbool_t H5_ATTR_UNUSED disable_shared, const void *_mesg)
 {
     const H5O_name_t       *mesg = (const H5O_name_t *) _mesg;
-    size_t                  ret_value;
+    size_t                  ret_value = 0;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Onull.c b/src/H5Onull.c
index a6c6524..258f695 100644
--- a/src/H5Onull.c
+++ b/src/H5Onull.c
@@ -24,7 +24,8 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Opkg.h"             /* Object headers			*/
diff --git a/src/H5Opkg.h b/src/H5Opkg.h
index 1f8a1cd..ddcdb10 100644
--- a/src/H5Opkg.h
+++ b/src/H5Opkg.h
@@ -13,7 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#ifndef H5O_PACKAGE
+#if !(defined H5O_FRIEND || defined H5O_MODULE)
 #error "Do not include this file outside the H5O package!"
 #endif
 
diff --git a/src/H5Opline.c b/src/H5Opline.c
index b79a73c..95a82b5 100644
--- a/src/H5Opline.c
+++ b/src/H5Opline.c
@@ -20,8 +20,9 @@
  * Purpose:	Data filter pipeline message.
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+#define H5Z_FRIEND		/*suppress error about including H5Zpkg	  */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Dprivate.h"		/* Datasets				*/
@@ -116,7 +117,7 @@ H5O_pline_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5
     H5Z_filter_info_t   *filter;                /* Filter to decode */
     size_t		name_length;            /* Length of filter name */
     size_t		i;                      /* Local index variable */
-    void		*ret_value;             /* Return value */
+    void		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -344,7 +345,7 @@ H5O_pline_copy(const void *_src, void *_dst/*out*/)
     const H5O_pline_t	*src = (const H5O_pline_t *)_src;       /* Source pipeline message */
     H5O_pline_t		*dst = (H5O_pline_t *)_dst;             /* Destination pipeline message */
     size_t		i;                      /* Local index variable */
-    H5O_pline_t		*ret_value;             /* Return value */
+    H5O_pline_t		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -434,7 +435,7 @@ H5O_pline_size(const H5F_t H5_ATTR_UNUSED *f, const void *mesg)
 {
     const H5O_pline_t	*pline = (const H5O_pline_t*)mesg;      /* Pipeline message */
     size_t i;                   /* Local index variable */
-    size_t ret_value;           /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Oprivate.h b/src/H5Oprivate.h
index 77a11cd..4586adb 100644
--- a/src/H5Oprivate.h
+++ b/src/H5Oprivate.h
@@ -110,11 +110,11 @@ typedef struct H5O_t H5O_t;
 #define H5O_CPY_MCDT_SEARCH_CB_NAME 	 "committed dtype list search" /* Callback function when the search for a matching committed datatype is complete */
 
 /* If the module using this macro is allowed access to the private variables, access them directly */
-#ifdef H5O_PACKAGE
+#ifdef H5O_MODULE
 #define H5O_OH_GET_ADDR(O)    ((O)->chunk[0].addr)
-#else /* H5O_PACKAGE */
+#else /* H5O_MODULE */
 #define H5O_OH_GET_ADDR(O)    (H5O_get_oh_addr(O))
-#endif /* H5O_PACKAGE */
+#endif /* H5O_MODULE */
 
 /* Set the fields in a shared message structure */
 #define H5O_UPDATE_SHARED(SH_MESG, SH_TYPE, F, MSG_TYPE, CRT_IDX, OH_ADDR)    \
diff --git a/src/H5Orefcount.c b/src/H5Orefcount.c
index f5c7e25..ff7dfee 100644
--- a/src/H5Orefcount.c
+++ b/src/H5Orefcount.c
@@ -24,7 +24,8 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -93,8 +94,8 @@ static void *
 H5O_refcount_decode(H5F_t H5_ATTR_UNUSED *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *open_oh,
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
-    H5O_refcount_t *refcount = NULL;  /* Reference count */
-    void        *ret_value;     /* Return value */
+    H5O_refcount_t *refcount = NULL;    /* Reference count */
+    void *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -177,9 +178,9 @@ H5O_refcount_encode(H5F_t H5_ATTR_UNUSED *f, hbool_t H5_ATTR_UNUSED disable_shar
 static void *
 H5O_refcount_copy(const void *_mesg, void *_dest)
 {
-    const H5O_refcount_t   *refcount = (const H5O_refcount_t *)_mesg;
-    H5O_refcount_t         *dest = (H5O_refcount_t *) _dest;
-    void                *ret_value;     /* Return value */
+    const H5O_refcount_t    *refcount = (const H5O_refcount_t *)_mesg;
+    H5O_refcount_t          *dest = (H5O_refcount_t *) _dest;
+    void                    *ret_value = NULL;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Osdspace.c b/src/H5Osdspace.c
index 50fba0b..28021de 100644
--- a/src/H5Osdspace.c
+++ b/src/H5Osdspace.c
@@ -13,8 +13,8 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5O_PACKAGE	/*suppress error about including H5Opkg	  */
-#define H5S_PACKAGE		/*prevent warning from including H5Spkg.h */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+#define H5S_FRIEND		/*prevent warning from including H5Spkg.h */
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Dprivate.h"		/* Datasets				*/
@@ -115,9 +115,9 @@ H5O_sdspace_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
     H5S_extent_t	*sdim = NULL;/* New extent dimensionality structure */
-    void		*ret_value;
-    unsigned		i;		/* local counting variable */
     unsigned		flags, version;
+    unsigned		i;                      /* Local counting variable */
+    void                *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -302,7 +302,7 @@ H5O_sdspace_copy(const void *_mesg, void *_dest)
 {
     const H5S_extent_t	   *mesg = (const H5S_extent_t *)_mesg;
     H5S_extent_t	   *dest = (H5S_extent_t *)_dest;
-    void                   *ret_value;          /* Return value */
+    void                   *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -352,7 +352,7 @@ static size_t
 H5O_sdspace_size(const H5F_t *f, const void *_mesg)
 {
     const H5S_extent_t	*space = (const H5S_extent_t *)_mesg;
-    size_t		ret_value;
+    size_t		ret_value = 0;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Oshared.c b/src/H5Oshared.c
index c5c088a..25baa88 100644
--- a/src/H5Oshared.c
+++ b/src/H5Oshared.c
@@ -30,7 +30,7 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
 
 
 /***********/
@@ -313,7 +313,7 @@ H5O_shared_decode(H5F_t *f, hid_t dxpl_id, H5O_t *open_oh, unsigned *ioflags,
 {
     H5O_shared_t sh_mesg;       /* Shared message info */
     unsigned version;           /* Shared message version */
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -477,7 +477,7 @@ H5O_set_shared(H5O_shared_t *dst, const H5O_shared_t *src)
 size_t
 H5O_shared_size(const H5F_t *f, const H5O_shared_t *sh_mesg)
 {
-    size_t ret_value;           /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Oshared.h b/src/H5Oshared.h
index 2ac2a98..e8d620a 100644
--- a/src/H5Oshared.h
+++ b/src/H5Oshared.h
@@ -51,7 +51,7 @@ static H5_INLINE void *
 H5O_SHARED_DECODE(H5F_t *f, hid_t dxpl_id, H5O_t *open_oh, unsigned mesg_flags,
     unsigned *ioflags, const uint8_t *p)
 {
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -166,7 +166,7 @@ static H5_INLINE size_t
 H5O_SHARED_SIZE(const H5F_t *f, hbool_t disable_shared, const void *_mesg)
 {
     const H5O_shared_t *sh_mesg = (const H5O_shared_t *)_mesg;     /* Pointer to shared message portion of actual message */
-    size_t ret_value;           /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -324,7 +324,7 @@ H5O_SHARED_COPY_FILE(H5F_t *file_src, void *_native_src, H5F_t *file_dst,
     void *udata, hid_t dxpl_id)
 {
     void *dst_mesg = NULL;      /* Destination message */
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Oshmesg.c b/src/H5Oshmesg.c
index deb10ab..a506ce2 100644
--- a/src/H5Oshmesg.c
+++ b/src/H5Oshmesg.c
@@ -21,7 +21,8 @@
  *              information in the superblock extension.
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -79,8 +80,8 @@ static void *
 H5O_shmesg_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *open_oh,
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
-    H5O_shmesg_table_t	*mesg;          /* Native message */
-    void                *ret_value;     /* Return value */
+    H5O_shmesg_table_t	*mesg;                  /* Native message */
+    void		*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -156,7 +157,7 @@ H5O_shmesg_copy(const void *_mesg, void *_dest)
 {
     const H5O_shmesg_table_t	*mesg = (const H5O_shmesg_table_t *)_mesg;
     H5O_shmesg_table_t		*dest = (H5O_shmesg_table_t *)_dest;
-    void			*ret_value;
+    void			*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -194,7 +195,7 @@ done:
 static size_t
 H5O_shmesg_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, const void H5_ATTR_UNUSED *_mesg)
 {
-    size_t                   ret_value;
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Ostab.c b/src/H5Ostab.c
index 133a3e2..bb39e58 100644
--- a/src/H5Ostab.c
+++ b/src/H5Ostab.c
@@ -24,8 +24,9 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg   */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
@@ -101,7 +102,7 @@ H5O_stab_decode(H5F_t *f, hid_t H5_ATTR_UNUSED dxpl_id, H5O_t H5_ATTR_UNUSED *op
     unsigned H5_ATTR_UNUSED mesg_flags, unsigned H5_ATTR_UNUSED *ioflags, const uint8_t *p)
 {
     H5O_stab_t          *stab = NULL;
-    void                *ret_value;     /* Return value */
+    void                *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -180,9 +181,9 @@ H5O_stab_encode(H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, uint8_t *p, con
 static void *
 H5O_stab_copy(const void *_mesg, void *_dest)
 {
-    const H5O_stab_t       *stab = (const H5O_stab_t *) _mesg;
-    H5O_stab_t             *dest = (H5O_stab_t *) _dest;
-    void                *ret_value;     /* Return value */
+    const H5O_stab_t    *stab = (const H5O_stab_t *) _mesg;
+    H5O_stab_t          *dest = (H5O_stab_t *) _dest;
+    void                *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -222,7 +223,7 @@ done:
 static size_t
 H5O_stab_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, const void H5_ATTR_UNUSED *_mesg)
 {
-    size_t ret_value;   /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -314,8 +315,8 @@ H5O_stab_copy_file(H5F_t *file_src, void *native_src, H5F_t *file_dst,
     H5O_stab_t          *stab_src = (H5O_stab_t *) native_src;
     H5O_stab_t          *stab_dst = NULL;
     H5G_copy_file_ud_t  *udata = (H5G_copy_file_ud_t *)_udata;
-    size_t              size_hint;              /* Local heap initial size */
-    void                *ret_value;             /* Return value */
+    size_t              size_hint;             /* Local heap initial size */
+    void                *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Otest.c b/src/H5Otest.c
index e7312ee..b5f728a 100644
--- a/src/H5Otest.c
+++ b/src/H5Otest.c
@@ -23,8 +23,8 @@
 /* Module Setup */
 /****************/
 
-#define H5A_PACKAGE		/*suppress error about including H5Apkg	  */
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#define H5A_FRIEND		/*suppress error about including H5Apkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
 #define H5O_TESTING		/*suppress warning about H5O testing funcs*/
 
 
@@ -99,7 +99,7 @@ H5O_is_attr_dense_test(hid_t oid)
     H5O_t *oh = NULL;           /* Object header */
     H5O_ainfo_t ainfo;          /* Attribute information for object */
     H5O_loc_t *loc;             /* Pointer to object's location */
-    htri_t ret_value;           /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -159,12 +159,12 @@ htri_t
 H5O_is_attr_empty_test(hid_t oid)
 {
     H5O_t *oh = NULL;           /* Object header */
-    H5B2_t *bt2_name = NULL;            /* v2 B-tree handle for name index */
+    H5B2_t *bt2_name = NULL;    /* v2 B-tree handle for name index */
     H5O_ainfo_t ainfo;          /* Attribute information for object */
     htri_t ainfo_exists = FALSE;        /* Whether the attribute info exists in the file */
-    H5O_loc_t *loc;            /* Pointer to object's location */
+    H5O_loc_t *loc;             /* Pointer to object's location */
     hsize_t nattrs;             /* Number of attributes */
-    htri_t ret_value;           /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5Ounknown.c b/src/H5Ounknown.c
index 548f74d..546e839 100644
--- a/src/H5Ounknown.c
+++ b/src/H5Ounknown.c
@@ -24,7 +24,8 @@
  *-------------------------------------------------------------------------
  */
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
+#include "H5Omodule.h"          /* This source code file is part of the H5O module */
+
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
diff --git a/src/H5P.c b/src/H5P.c
index ff230ed..3d09231 100644
--- a/src/H5P.c
+++ b/src/H5P.c
@@ -22,10 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5P__init_pub_interface
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -62,6 +59,9 @@ typedef struct {
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -74,51 +74,6 @@ typedef struct {
 
 
 /*--------------------------------------------------------------------------
-NAME
-   H5P__init_pub_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5P__init_pub_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5P_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5P__init_pub_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5P_init())
-} /* H5P__init_pub_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5P__term_pub_interface -- Terminate interface
-USAGE
-    herr_t H5P__term_pub_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5P__term_pub_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5P__term_pub_interface() */
-
-
-/*--------------------------------------------------------------------------
  NAME
     H5Pcopy
  PURPOSE
@@ -1395,7 +1350,7 @@ H5Premove(hid_t plist_id, const char *name)
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid property name");
 
     /* Create the new property list class */
-    if((ret_value = H5P_remove(plist_id,plist,name)) < 0)
+    if((ret_value = H5P_remove(plist, name)) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTDELETE, FAIL, "unable to remove property");
 
 done:
diff --git a/src/H5PL.c b/src/H5PL.c
index bfe79aa..4c35c09 100644
--- a/src/H5PL.c
+++ b/src/H5PL.c
@@ -16,8 +16,7 @@
 /* Module Setup */
 /****************/
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5PL__init_interface
+#include "H5PLmodule.h"          /* This source code file is part of the H5PL module */
 
 
 /***********/
@@ -52,7 +51,6 @@
  * If you do not do this, people will be unable to incorporate our
  * source code into their own CMake builds if they define UNICODE.
  */
-
 #ifdef H5_HAVE_WIN32_API
 
 #define H5PL_PATH_SEPARATOR     ";"
@@ -103,6 +101,7 @@ typedef const void *(*H5PL_get_plugin_info_t)(void);
 /* Special symbol to indicate no plugin loading */
 #define H5PL_NO_PLUGIN          "::"
 
+
 /******************/
 /* Local Typedefs */
 /******************/
@@ -130,6 +129,9 @@ static herr_t H5PL__close(H5PL_HANDLE handle);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -153,36 +155,94 @@ static hbool_t          H5PL_path_found_g = FALSE;
 /* Enable all plugin libraries */
 static unsigned int     H5PL_plugin_g = H5PL_ALL_PLUGIN;
 
+
 
 /*--------------------------------------------------------------------------
 NAME
-   H5PL__init_interface -- Initialize interface-specific information
+   H5PL__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5PL__init_interface()
+    herr_t H5PL__init_package()
 RETURNS
     Non-negative on success/Negative on failure
 DESCRIPTION
     Initializes any interface-specific data or routines.
 
 --------------------------------------------------------------------------*/
-static herr_t
-H5PL__init_interface(void)
+herr_t
+H5PL__init_package(void)
 {
     char        *preload_path;
 
-    FUNC_ENTER_STATIC_NOERR
+    FUNC_ENTER_PACKAGE_NOERR
 
     /* Retrieve pathnames from HDF5_PLUGIN_PRELOAD if the user sets it
      * to tell the library to load plugin libraries without search.
      */
-    if(NULL != (preload_path = HDgetenv("HDF5_PLUGIN_PRELOAD"))) {
+    if(NULL != (preload_path = HDgetenv("HDF5_PLUGIN_PRELOAD")))
         /* Special symbal "::" means no plugin during data reading. */
         if(!HDstrcmp(preload_path, H5PL_NO_PLUGIN))
             H5PL_plugin_g = 0;
-    } /* end if */
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5PL__init_interface() */
+} /* end H5PL__init_package() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5PL_term_package
+ *
+ * Purpose:     Terminate the H5PL interface: release all memory, reset all
+ *              global variables to initial values. This only happens if all
+ *              types have been destroyed from other interfaces.
+ *
+ * Return:      Success:    Positive if any action was taken that might
+ *                          affect some other interface; zero otherwise.
+ *              Failure:    Negative.
+ *
+ * Programmer:  Raymond Lu
+ *              20 February 2013
+ *
+ *-------------------------------------------------------------------------
+ */
+int
+H5PL_term_package(void)
+{
+    int  n = 0;
+    
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+    if(H5_PKG_INIT_VAR) {
+        size_t u;       /* Local index variable */
+
+        /* Close opened dynamic libraries */
+        if(H5PL_table_g) {
+            for(u = 0; u < H5PL_table_used_g; u++)
+                H5PL__close((H5PL_table_g[u]).handle);
+
+            /* Free the table of dynamic libraries */
+            H5PL_table_g = (H5PL_table_t *)H5MM_xfree(H5PL_table_g);
+            H5PL_table_used_g = H5PL_table_alloc_g = 0;
+
+            n++;
+        } /* end if */
+
+        /* Free the table of search paths */
+        if(H5PL_num_paths_g > 0) {
+            for(u = 0; u < H5PL_num_paths_g; u++)
+                if(H5PL_path_table_g[u])
+                    H5PL_path_table_g[u] = (char *)H5MM_xfree(H5PL_path_table_g[u]);
+            H5PL_num_paths_g = 0;
+            H5PL_path_found_g = FALSE;
+
+            n++;
+        } /* end if */
+
+        /* Mark the interface as uninitialized */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(n)
+} /* end H5PL_term_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -209,21 +269,24 @@ H5PLset_loading_state(unsigned int plugin_type)
 {
     char *preload_path;
     herr_t ret_value = SUCCEED; /* Return value */
+
     FUNC_ENTER_API(FAIL)
     H5TRACE1("e", "Iu", plugin_type);
+
     /* change the bit value of the requested plugin type(s) */
     H5PL_plugin_g = plugin_type;
+
     /* check if special ENV variable is set and disable all plugin types */
-    if(NULL != (preload_path = HDgetenv("HDF5_PLUGIN_PRELOAD"))) {
+    if(NULL != (preload_path = HDgetenv("HDF5_PLUGIN_PRELOAD")))
         /* Special symbol "::" means no plugin during data reading. */
         if(!HDstrcmp(preload_path, H5PL_NO_PLUGIN))
             H5PL_plugin_g = 0;
-    }
+
 done:
     FUNC_LEAVE_API(ret_value)
 } /* end H5PLset_loading_state() */
 
-
+
 /*-------------------------------------------------------------------------
  * Function: H5PLget_loading_state
  *
@@ -240,66 +303,17 @@ herr_t
 H5PLget_loading_state(unsigned int *plugin_type)
 {
     herr_t ret_value = SUCCEED; /* Return value */
+
     FUNC_ENTER_API(FAIL)
     H5TRACE1("e", "*Iu", plugin_type);
 
     if(plugin_type)
         *plugin_type = H5PL_plugin_g;
-    done:
+
+done:
     FUNC_LEAVE_API(ret_value)
 } /* end H5PLget_loading_state() */
 
-
-
-/*-------------------------------------------------------------------------
- * Function:    H5PL_term_interface
- *
- * Purpose:     Terminate the H5PL interface: release all memory, reset all
- *              global variables to initial values. This only happens if all
- *              types have been destroyed from other interfaces.
- *
- * Return:      Success:    Positive if any action was taken that might
- *                          affect some other interface; zero otherwise.
- *
- *              Failure:    Negative.
- *
- * Programmer:  Raymond Lu
- *              20 February 2013
- *
- *-------------------------------------------------------------------------
- */
-int
-H5PL_term_interface(void)
-{
-    int  i = 0;
-    
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    if(H5_interface_initialize_g) {
-        size_t u;       /* Local index variable */
-
-        /* Close opened dynamic libraries */
-        for(u = 0; u < H5PL_table_used_g; u++)
-            H5PL__close((H5PL_table_g[u]).handle);
-
-        /* Free the table of dynamic libraries */
-        H5PL_table_g = (H5PL_table_t *)H5MM_xfree(H5PL_table_g);
-        H5PL_table_used_g = H5PL_table_alloc_g = 0;
-
-        /* Free the table of search paths */
-        for(u = 0; u < H5PL_num_paths_g; u++)
-            if(H5PL_path_table_g[u])
-                H5PL_path_table_g[u] = (char *)H5MM_xfree(H5PL_path_table_g[u]);
-        H5PL_num_paths_g = 0;
-        H5PL_path_found_g = FALSE;
-
-        H5_interface_initialize_g = 0;
-        i = 1;
-    } /* end if */
-
-    FUNC_LEAVE_NOAPI(i)
-} /* end H5PL_term_interface() */
-
 
 /*-------------------------------------------------------------------------
  * Function:    H5PL_load
@@ -324,16 +338,17 @@ H5PL_load(H5PL_type_t type, int id)
 
     FUNC_ENTER_NOAPI(NULL)
 
-    switch (type) {
-    case H5PL_TYPE_FILTER:
-        if((H5PL_plugin_g & H5PL_FILTER_PLUGIN) == 0)
-            HGOTO_ERROR(H5E_PLUGIN, H5E_CANTLOAD, NULL, "required dynamically loaded plugin filter '%d' is not available", id)
-        break;
-    case H5PL_TYPE_ERROR:
-    case H5PL_TYPE_NONE:
-    default:
-        HGOTO_ERROR(H5E_PLUGIN, H5E_CANTLOAD, NULL, "required dynamically loaded plugin '%d' is not valid", id)
-    }
+    switch(type) {
+        case H5PL_TYPE_FILTER:
+            if((H5PL_plugin_g & H5PL_FILTER_PLUGIN) == 0)
+                HGOTO_ERROR(H5E_PLUGIN, H5E_CANTLOAD, NULL, "required dynamically loaded plugin filter '%d' is not available", id)
+            break;
+
+        case H5PL_TYPE_ERROR:
+        case H5PL_TYPE_NONE:
+        default:
+            HGOTO_ERROR(H5E_PLUGIN, H5E_CANTLOAD, NULL, "required dynamically loaded plugin '%d' is not valid", id)
+    } /* end switch */
 
     /* Initialize the location paths for dynamic libraries, if they aren't
      * already set up.
@@ -726,3 +741,4 @@ H5PL__close(H5PL_HANDLE handle)
    
     FUNC_LEAVE_NOAPI(SUCCEED)
 } /* end H5PL__close() */
+
diff --git a/src/H5PLmodule.h b/src/H5PLmodule.h
new file mode 100644
index 0000000..0339737
--- /dev/null
+++ b/src/H5PLmodule.h
@@ -0,0 +1,36 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5PL package.  Including this header means that the source file
+ *		is part of the H5PL package.
+ */
+#ifndef _H5PLmodule_H
+#define _H5PLmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5PL_MODULE
+#define H5_MY_PKG       H5PL
+#define H5_MY_PKG_ERR   H5E_PLUGIN
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5PLmodule_H */
+
+
diff --git a/src/H5Pacpl.c b/src/H5Pacpl.c
index 0a0641c..bfed332 100644
--- a/src/H5Pacpl.c
+++ b/src/H5Pacpl.c
@@ -27,7 +27,9 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
+
 
 /***********/
 /* Headers */
diff --git a/src/H5Pdapl.c b/src/H5Pdapl.c
index c8df45b..eab9337 100644
--- a/src/H5Pdapl.c
+++ b/src/H5Pdapl.c
@@ -27,7 +27,8 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -49,13 +50,13 @@
 /* Definitions for size of raw data chunk cache(slots) */
 #define H5D_ACS_DATA_CACHE_NUM_SLOTS_SIZE       sizeof(size_t)
 #define H5D_ACS_DATA_CACHE_NUM_SLOTS_DEF        H5D_CHUNK_CACHE_NSLOTS_DEFAULT
-#define H5D_ACS_DATA_CACHE_NUM_SLOTS_ENC        H5P__encode_size_t
-#define H5D_ACS_DATA_CACHE_NUM_SLOTS_DEC        H5P__decode_size_t
+#define H5D_ACS_DATA_CACHE_NUM_SLOTS_ENC        H5P__encode_chunk_cache_nslots
+#define H5D_ACS_DATA_CACHE_NUM_SLOTS_DEC        H5P__decode_chunk_cache_nslots
 /* Definition for size of raw data chunk cache(bytes) */
 #define H5D_ACS_DATA_CACHE_BYTE_SIZE_SIZE       sizeof(size_t)
 #define H5D_ACS_DATA_CACHE_BYTE_SIZE_DEF        H5D_CHUNK_CACHE_NBYTES_DEFAULT
-#define H5D_ACS_DATA_CACHE_BYTE_SIZE_ENC        H5P__encode_size_t
-#define H5D_ACS_DATA_CACHE_BYTE_SIZE_DEC        H5P__decode_size_t
+#define H5D_ACS_DATA_CACHE_BYTE_SIZE_ENC        H5P__encode_chunk_cache_nbytes
+#define H5D_ACS_DATA_CACHE_BYTE_SIZE_DEC        H5P__decode_chunk_cache_nbytes
 /* Definition for preemption read chunks first */
 #define H5D_ACS_PREEMPT_READ_CHUNKS_SIZE        sizeof(double)
 #define H5D_ACS_PREEMPT_READ_CHUNKS_DEF         H5D_CHUNK_CACHE_W0_DEFAULT
@@ -88,6 +89,12 @@
 
 /* Property class callbacks */
 static herr_t H5P__dacc_reg_prop(H5P_genclass_t *pclass);
+static herr_t H5P__encode_chunk_cache_nslots(const void *value, void **_pp,
+    size_t *size);
+static herr_t H5P__decode_chunk_cache_nslots(const void **_pp, void *_value);
+static herr_t H5P__encode_chunk_cache_nbytes(const void *value, void **_pp,
+    size_t *size);
+static herr_t H5P__decode_chunk_cache_nbytes(const void **_pp, void *_value);
 
 /* Property list callbacks */
 static herr_t H5P__dacc_vds_view_enc(const void *value, void **pp, size_t *size);
@@ -314,6 +321,226 @@ done:
 
 
 /*-------------------------------------------------------------------------
+ * Function:       H5P__encode_chunk_cache_nslots
+ *
+ * Purpose:        Encode the rdcc_nslots parameter to a serialized
+ *                 property list.  Similar to H5P__encode_size_t except
+ *                 the value of 255 for the enc_size field is reserved to
+ *                 indicate H5D_ACS_DATA_CACHE_NUM_SLOTS_DEF, in which
+ *                 nothing further is encoded.
+ *
+ * Return:         Success:     Non-negative
+ *                 Failure:     Negative
+ *
+ * Programmer:     Neil Fortner
+ *                 Wednesday, January 23, 2013
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__encode_chunk_cache_nslots(const void *value, void **_pp, size_t *size)
+{
+    uint64_t enc_value;     /* Property value to encode */
+    uint8_t **pp = (uint8_t **)_pp;
+    unsigned enc_size;      /* Size of encoded property */
+
+    FUNC_ENTER_PACKAGE_NOERR
+
+    /* Sanity checks */
+    HDcompile_assert(sizeof(size_t) <= sizeof(uint64_t));
+    HDassert(size);
+
+    /* Determine if this is the default value, in which case only encode
+     * enc_size (as 255).  Also set size needed for encoding. */
+    if(*(const size_t *)value == H5D_ACS_DATA_CACHE_NUM_SLOTS_DEF) {
+        enc_size = 0;
+        *size += 1;
+    } /* end if */
+    else {
+        enc_value = (uint64_t)*(const size_t *)value;
+        enc_size = H5VM_limit_enc_size(enc_value);
+        HDassert(enc_size > 0);
+        *size += (1 + enc_size);
+    } /* end else */
+
+    HDassert(enc_size < 256);
+
+    if(NULL != *pp) {
+        /* Encode the size */
+        *(*pp)++ = (uint8_t)enc_size;
+
+        /* Encode the value if necessary */
+        if(enc_size != 0) {
+            UINT64ENCODE_VAR(*pp, enc_value, enc_size);
+        } /* end if */
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5P__encode_chunk_cache_nslots() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:       H5P__decode_chunk_cache_nslots
+ *
+ * Purpose:        Decode the rdcc_nslots parameter from a serialized
+ *                 property list.  Similar to H5P__decode_size_t except
+ *                 the value of 255 for the enc_size field is reserved to
+ *                 indicate H5D_ACS_DATA_CACHE_NUM_SLOTS_DEF, in which
+ *                 nothing further needs to be decoded.
+ *
+ * Return:         Success:     Non-negative
+ *                 Failure:     Negative
+ *
+ * Programmer:     Neil Fortner
+ *                 Wednesday, January 23, 2013
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__decode_chunk_cache_nslots(const void **_pp, void *_value)
+{
+    size_t *value = (size_t *)_value;   /* Property value to return */
+    const uint8_t **pp = (const uint8_t **)_pp;
+    uint64_t enc_value;                 /* Decoded property value */
+    unsigned enc_size;                  /* Size of encoded property */
+
+    FUNC_ENTER_PACKAGE_NOERR
+
+    /* Sanity check */
+    HDcompile_assert(sizeof(size_t) <= sizeof(uint64_t));
+    HDassert(pp);
+    HDassert(*pp);
+    HDassert(value);
+
+    /* Decode the size */
+    enc_size = *(*pp)++;
+    HDassert(enc_size < 256);
+
+    /* Determine if enc_size indicates that this is the default value, in which
+     * case set value to H5D_ACS_DATA_CACHE_NUM_SLOTS_DEF and return */
+    if(enc_size == 0)
+        *value = H5D_ACS_DATA_CACHE_NUM_SLOTS_DEF;
+    else {
+        /* Decode the value */
+        UINT64DECODE_VAR(*pp, enc_value, enc_size);
+        H5_CHECKED_ASSIGN(*value, uint64_t, enc_value, size_t);
+    } /* end else */
+
+    FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5P__decode_chunk_cache_nslots() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:       H5P__encode_chunk_cache_nbytes
+ *
+ * Purpose:        Encode the rdcc_nbytes parameter to a serialized
+ *                 property list.  Similar to H5P__encode_size_t except
+ *                 the value of 255 for the enc_size field is reserved to
+ *                 indicate H5D_ACS_DATA_CACHE_BYTE_SIZE_DEF, in which
+ *                 nothing further is encoded.
+ *
+ * Return:         Success:     Non-negative
+ *                 Failure:     Negative
+ *
+ * Programmer:     Neil Fortner
+ *                 Wednesday, January 23, 2013
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__encode_chunk_cache_nbytes(const void *value, void **_pp, size_t *size)
+{
+    uint64_t enc_value;     /* Property value to encode */
+    uint8_t **pp = (uint8_t **)_pp;
+    unsigned enc_size;      /* Size of encoded property */
+
+    FUNC_ENTER_PACKAGE_NOERR
+
+    /* Sanity checks */
+    HDcompile_assert(sizeof(size_t) <= sizeof(uint64_t));
+    HDassert(size);
+
+    /* Determine if this is the default value, in which case only encode
+     * enc_size (as 255).  Also set size needed for encoding. */
+    if(*(const size_t *)value == H5D_ACS_DATA_CACHE_BYTE_SIZE_DEF) {
+        enc_size = 0;
+        *size += 1;
+    } /* end if */
+    else {
+        enc_value = (uint64_t)*(const size_t *)value;
+        enc_size = H5VM_limit_enc_size(enc_value);
+        HDassert(enc_size > 0);
+        *size += (1 + enc_size);
+    } /* end else */
+
+    HDassert(enc_size < 256);
+
+    if(NULL != *pp) {
+        /* Encode the size */
+        *(*pp)++ = (uint8_t)enc_size;
+
+        /* Encode the value if necessary */
+        if(enc_size != 0) {
+            UINT64ENCODE_VAR(*pp, enc_value, enc_size);
+        } /* end if */
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5P__encode_chunk_cache_nbytes() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:       H5P__decode_chunk_cache_nbytes
+ *
+ * Purpose:        Decode the rdcc_nbytes parameter from a serialized
+ *                 property list.  Similar to H5P__decode_size_t except
+ *                 the value of 255 for the enc_size field is reserved to
+ *                 indicate H5D_ACS_DATA_CACHE_BYTE_SIZE_DEF, in which
+ *                 nothing further needs to be decoded.
+ *
+ * Return:         Success:     Non-negative
+ *                 Failure:     Negative
+ *
+ * Programmer:     Neil Fortner
+ *                 Wednesday, January 23, 2013
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__decode_chunk_cache_nbytes(const void **_pp, void *_value)
+{
+    size_t *value = (size_t *)_value;   /* Property value to return */
+    const uint8_t **pp = (const uint8_t **)_pp;
+    uint64_t enc_value;                 /* Decoded property value */
+    unsigned enc_size;                  /* Size of encoded property */
+
+    FUNC_ENTER_PACKAGE_NOERR
+
+    /* Sanity check */
+    HDcompile_assert(sizeof(size_t) <= sizeof(uint64_t));
+    HDassert(pp);
+    HDassert(*pp);
+    HDassert(value);
+
+    /* Decode the size */
+    enc_size = *(*pp)++;
+    HDassert(enc_size < 256);
+
+    /* Determine if enc_size indicates that this is the default value, in which
+     * case set value to H5D_ACS_DATA_CACHE_BYTE_SIZE_DEF and return */
+    if(enc_size == 0)
+        *value = H5D_ACS_DATA_CACHE_BYTE_SIZE_DEF;
+    else {
+        /* Decode the value */
+        UINT64DECODE_VAR(*pp, enc_value, enc_size);
+        H5_CHECKED_ASSIGN(*value, uint64_t, enc_value, size_t);
+    } /* end else */
+
+    FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5P__decode_chunk_cache_nbytes() */
+
+
+/*-------------------------------------------------------------------------
  * Function:    H5Pset_virtual_view
  *
  * Purpose:     Takes the access property list for the virtual dataset,
diff --git a/src/H5Pdcpl.c b/src/H5Pdcpl.c
index 69645a4..5a0e32f 100644
--- a/src/H5Pdcpl.c
+++ b/src/H5Pdcpl.c
@@ -27,8 +27,8 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -45,7 +45,7 @@
 #include "H5Ppkg.h"		/* Property lists		  	*/
 #include "H5Sprivate.h"         /* Dataspaces                           */
 #include "H5Tprivate.h"		/* Datatypes 				*/
-#include "H5Zpkg.h"		/* Data filters				*/
+#include "H5Zprivate.h"		/* Data filters				*/
 
 
 /****************/
@@ -83,18 +83,26 @@
 /* Definitions for storage layout property */
 #define H5D_CRT_LAYOUT_SIZE        sizeof(H5O_layout_t)
 #define H5D_CRT_LAYOUT_DEF         H5D_DEF_LAYOUT_CONTIG
+#define H5D_CRT_LAYOUT_SET         H5P__dcrt_layout_set
+#define H5D_CRT_LAYOUT_GET         H5P__dcrt_layout_get
 #define H5D_CRT_LAYOUT_ENC         H5P__dcrt_layout_enc
 #define H5D_CRT_LAYOUT_DEC         H5P__dcrt_layout_dec
 #define H5D_CRT_LAYOUT_DEL         H5P__dcrt_layout_del
+#define H5D_CRT_LAYOUT_COPY        H5P__dcrt_layout_copy
 #define H5D_CRT_LAYOUT_CMP         H5P__dcrt_layout_cmp
 #define H5D_CRT_LAYOUT_CLOSE       H5P__dcrt_layout_close
 /* Definitions for fill value.  size=0 means fill value will be 0 as
  * library default; size=-1 means fill value is undefined. */
 #define H5D_CRT_FILL_VALUE_SIZE    sizeof(H5O_fill_t)
 #define H5D_CRT_FILL_VALUE_DEF     {{0, NULL, H5O_NULL_ID, {{0, HADDR_UNDEF}}}, H5O_FILL_VERSION_2, NULL, 0, NULL, H5D_ALLOC_TIME_LATE, H5D_FILL_TIME_IFSET, FALSE}
-#define H5D_CRT_FILL_VALUE_ENC     H5P__fill_value_enc
-#define H5D_CRT_FILL_VALUE_DEC     H5P__fill_value_dec
+#define H5D_CRT_FILL_VALUE_SET     H5P__dcrt_fill_value_set
+#define H5D_CRT_FILL_VALUE_GET     H5P__dcrt_fill_value_get
+#define H5D_CRT_FILL_VALUE_ENC     H5P__dcrt_fill_value_enc
+#define H5D_CRT_FILL_VALUE_DEC     H5P__dcrt_fill_value_dec
+#define H5D_CRT_FILL_VALUE_DEL     H5P__dcrt_fill_value_del
+#define H5D_CRT_FILL_VALUE_COPY    H5P__dcrt_fill_value_copy
 #define H5D_CRT_FILL_VALUE_CMP     H5P_fill_value_cmp
+#define H5D_CRT_FILL_VALUE_CLOSE   H5P__dcrt_fill_value_close
 /* Definitions for space allocation time state */
 #define H5D_CRT_ALLOC_TIME_STATE_SIZE   sizeof(unsigned)
 #define H5D_CRT_ALLOC_TIME_STATE_DEF    1
@@ -103,9 +111,14 @@
 /* Definitions for external file list */
 #define H5D_CRT_EXT_FILE_LIST_SIZE sizeof(H5O_efl_t)
 #define H5D_CRT_EXT_FILE_LIST_DEF  {HADDR_UNDEF, 0, 0, NULL}
+#define H5D_CRT_EXT_FILE_LIST_SET  H5P__dcrt_ext_file_list_set
+#define H5D_CRT_EXT_FILE_LIST_GET  H5P__dcrt_ext_file_list_get
 #define H5D_CRT_EXT_FILE_LIST_ENC  H5P__dcrt_ext_file_list_enc
 #define H5D_CRT_EXT_FILE_LIST_DEC  H5P__dcrt_ext_file_list_dec
+#define H5D_CRT_EXT_FILE_LIST_DEL  H5P__dcrt_ext_file_list_del
+#define H5D_CRT_EXT_FILE_LIST_COPY H5P__dcrt_ext_file_list_copy
 #define H5D_CRT_EXT_FILE_LIST_CMP  H5P__dcrt_ext_file_list_cmp
+#define H5D_CRT_EXT_FILE_LIST_CLOSE H5P__dcrt_ext_file_list_close
 
 
 /******************/
@@ -130,20 +143,31 @@ static herr_t H5P__init_def_layout(void);
 
 /* Property class callbacks */
 static herr_t H5P__dcrt_reg_prop(H5P_genclass_t *pclass);
-static herr_t H5P__dcrt_copy(hid_t new_plist_t, hid_t old_plist_t, void *copy_data);
-static herr_t H5P__dcrt_close(hid_t dxpl_id, void *close_data);
 
 /* Property callbacks */
+static herr_t H5P__dcrt_layout_set(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__dcrt_layout_get(hid_t prop_id, const char *name, size_t size, void *value);
 static herr_t H5P__dcrt_layout_enc(const void *value, void **pp, size_t *size);
 static herr_t H5P__dcrt_layout_dec(const void **pp, void *value);
 static herr_t H5P__dcrt_layout_del(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__dcrt_layout_copy(const char *name, size_t size, void *value);
 static int H5P__dcrt_layout_cmp(const void *value1, const void *value2, size_t size);
 static herr_t H5P__dcrt_layout_close(const char *name, size_t size, void *value);
-static herr_t H5P__fill_value_enc(const void *value, void **pp, size_t *size);
-static herr_t H5P__fill_value_dec(const void **pp, void *value);
+static herr_t H5P__dcrt_fill_value_set(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__dcrt_fill_value_get(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__dcrt_fill_value_enc(const void *value, void **pp, size_t *size);
+static herr_t H5P__dcrt_fill_value_dec(const void **pp, void *value);
+static herr_t H5P__dcrt_fill_value_del(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__dcrt_fill_value_copy(const char *name, size_t size, void *value);
+static herr_t H5P__dcrt_fill_value_close(const char *name, size_t size, void *value);
+static herr_t H5P__dcrt_ext_file_list_set(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__dcrt_ext_file_list_get(hid_t prop_id, const char *name, size_t size, void *value);
 static herr_t H5P__dcrt_ext_file_list_enc(const void *value, void **pp, size_t *size);
 static herr_t H5P__dcrt_ext_file_list_dec(const void **pp, void *value);
+static herr_t H5P__dcrt_ext_file_list_del(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__dcrt_ext_file_list_copy(const char *name, size_t size, void *value);
 static int H5P__dcrt_ext_file_list_cmp(const void *value1, const void *value2, size_t size);
+static herr_t H5P__dcrt_ext_file_list_close(const char *name, size_t size, void *value);
 
 
 /*********************/
@@ -163,9 +187,9 @@ const H5P_libclass_t H5P_CLS_DCRT[1] = {{
 
     NULL,		        /* Class creation callback      */
     NULL,		        /* Class creation callback info */
-    H5P__dcrt_copy,		/* Class copy callback          */
+    NULL,                       /* Class copy callback          */
     NULL,		        /* Class copy callback info     */
-    H5P__dcrt_close,		/* Class close callback         */
+    NULL,                       /* Class close callback         */
     NULL 		        /* Class close callback info    */
 }};
 
@@ -224,14 +248,14 @@ H5P__dcrt_reg_prop(H5P_genclass_t *pclass)
 
     /* Register the storage layout property */
     if(H5P_register_real(pclass, H5D_CRT_LAYOUT_NAME, H5D_CRT_LAYOUT_SIZE, &H5D_def_layout_g, 
-            NULL, NULL, NULL, H5D_CRT_LAYOUT_ENC, H5D_CRT_LAYOUT_DEC,
-            H5D_CRT_LAYOUT_DEL, NULL, H5D_CRT_LAYOUT_CMP, H5D_CRT_LAYOUT_CLOSE) < 0)
+            NULL, H5D_CRT_LAYOUT_SET, H5D_CRT_LAYOUT_GET, H5D_CRT_LAYOUT_ENC, H5D_CRT_LAYOUT_DEC,
+            H5D_CRT_LAYOUT_DEL, H5D_CRT_LAYOUT_COPY, H5D_CRT_LAYOUT_CMP, H5D_CRT_LAYOUT_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the fill value property */
     if(H5P_register_real(pclass, H5D_CRT_FILL_VALUE_NAME, H5D_CRT_FILL_VALUE_SIZE, &H5D_def_fill_g, 
-            NULL, NULL, NULL, H5D_CRT_FILL_VALUE_ENC, H5D_CRT_FILL_VALUE_DEC,
-            NULL, NULL, H5D_CRT_FILL_VALUE_CMP, NULL) < 0)
+            NULL, H5D_CRT_FILL_VALUE_SET, H5D_CRT_FILL_VALUE_GET, H5D_CRT_FILL_VALUE_ENC, H5D_CRT_FILL_VALUE_DEC,
+            H5D_CRT_FILL_VALUE_DEL, H5D_CRT_FILL_VALUE_COPY, H5D_CRT_FILL_VALUE_CMP, H5D_CRT_FILL_VALUE_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the space allocation time state property */
@@ -242,8 +266,8 @@ H5P__dcrt_reg_prop(H5P_genclass_t *pclass)
 
     /* Register the external file list property */
     if(H5P_register_real(pclass, H5D_CRT_EXT_FILE_LIST_NAME, H5D_CRT_EXT_FILE_LIST_SIZE, &H5D_def_efl_g, 
-            NULL, NULL, NULL, H5D_CRT_EXT_FILE_LIST_ENC, H5D_CRT_EXT_FILE_LIST_DEC,
-            NULL, NULL, H5D_CRT_EXT_FILE_LIST_CMP, NULL) < 0)
+            NULL, H5D_CRT_EXT_FILE_LIST_SET, H5D_CRT_EXT_FILE_LIST_GET, H5D_CRT_EXT_FILE_LIST_ENC, H5D_CRT_EXT_FILE_LIST_DEC,
+            H5D_CRT_EXT_FILE_LIST_DEL, H5D_CRT_EXT_FILE_LIST_COPY, H5D_CRT_EXT_FILE_LIST_CMP, H5D_CRT_EXT_FILE_LIST_CLOSE) < 0)
        HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
 done:
@@ -252,170 +276,80 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P__dcrt_copy
+ * Function:    H5P__dcrt_layout_set
  *
- * Purpose:        Callback routine which is called whenever any dataset
- *                 creation property list is copied.  This routine copies
- *                 the properties from the old list to the new list.
+ * Purpose:     Copies a layout property when it's set for a property list
  *
- * Return:         Success:        Non-negative
- *                 Failure:        Negative
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
  *
- * Programmer:     Raymond Lu
- *                 Tuesday, October 2, 2001
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
  *
  *-------------------------------------------------------------------------
  */
 /* ARGSUSED */
 static herr_t
-H5P__dcrt_copy(hid_t dst_plist_id, hid_t src_plist_id, void H5_ATTR_UNUSED *copy_data)
+H5P__dcrt_layout_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
 {
-    H5O_fill_t     src_fill, dst_fill;          /* Source & destination fill values */
-    H5O_efl_t      src_efl, dst_efl;            /* Source & destination external file lists */
-    H5O_layout_t   src_layout, dst_layout;      /* Source & destination layout */
-    H5P_genplist_t *src_plist;                  /* Pointer to source property list */
-    H5P_genplist_t *dst_plist;                  /* Pointer to destination property list */
-    herr_t         ret_value = SUCCEED;         /* Return value */
+    H5O_layout_t    *layout = (H5O_layout_t *)value; /* Create local aliases for values */
+    H5O_layout_t    new_layout;
+    herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_STATIC
 
-    /* Verify property list IDs */
-    if(NULL == (dst_plist = (H5P_genplist_t *)H5I_object(dst_plist_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset creation property list")
-    if(NULL == (src_plist = (H5P_genplist_t *)H5I_object(src_plist_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset creation property list")
-
-    /* Get the layout, fill value, external file list, and data pipeline
-     *  properties from the old property list
-     */
-    if(H5P_get(src_plist, H5D_CRT_LAYOUT_NAME, &src_layout) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get layout")
-    if(H5P_get(src_plist, H5D_CRT_FILL_VALUE_NAME, &src_fill) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
-    if(H5P_get(src_plist, H5D_CRT_EXT_FILE_LIST_NAME, &src_efl) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get external file list")
+    /* Sanity check */
+    HDassert(value);
 
     /* Make copy of layout */
-    if(NULL == H5O_msg_copy(H5O_LAYOUT_ID, &src_layout, &dst_layout))
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't copy layout")
-
-    /* Reset layout values set when dataset is created */
-    dst_layout.ops = NULL;
-    switch(dst_layout.type) {
-        case H5D_COMPACT:
-            dst_layout.storage.u.compact.buf = H5MM_xfree(dst_layout.storage.u.compact.buf);
-            HDmemset(&dst_layout.storage.u.compact, 0, sizeof(dst_layout.storage.u.compact));
-            break;
-
-        case H5D_CONTIGUOUS:
-            dst_layout.storage.u.contig.addr = HADDR_UNDEF;
-            dst_layout.storage.u.contig.size = 0;
-            break;
-
-        case H5D_CHUNKED:
-            /* Reset chunk size */
-            dst_layout.u.chunk.size = 0;
-
-            /* Reset index info, if the chunk ops are set */
-            if(dst_layout.storage.u.chunk.ops)
-		/* Reset address and pointer of the array struct for the chunked storage index */
-                if(H5D_chunk_idx_reset(&dst_layout.storage.u.chunk, TRUE) < 0)
-                    HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "unable to reset chunked storage index in dest")
-
-            /* Reset chunk index ops */
-            dst_layout.storage.u.chunk.ops = NULL;
-            break;
-
-        case H5D_VIRTUAL:
-            dst_layout.storage.u.virt.serial_list_hobjid.addr = HADDR_UNDEF;
-            dst_layout.storage.u.virt.serial_list_hobjid.idx = 0;
-            break;
-
-        case H5D_LAYOUT_ERROR:
-        case H5D_NLAYOUTS:
-        default:
-            HDassert(0 && "Unknown layout type!");
-    } /* end switch */
-
-    /* Make copy of fill value */
-    if(NULL == H5O_msg_copy(H5O_FILL_ID, &src_fill, &dst_fill))
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't copy fill value")
-
-    /* Make copy of external file list */
-    HDmemset(&dst_efl, 0, sizeof(H5O_efl_t));
-    if(NULL == H5O_msg_copy(H5O_EFL_ID, &src_efl, &dst_efl))
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't copy external file list")
+    if(NULL == H5O_msg_copy(H5O_LAYOUT_ID, layout, &new_layout))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy layout")
 
-    /* Reset efl name_offset and heap_addr, these are the values when the dataset is created */
-    if(dst_efl.slot) {
-        unsigned int i;
-
-        dst_efl.heap_addr = HADDR_UNDEF;
-        for(i = 0; i < dst_efl.nused; i++)
-            dst_efl.slot[i].name_offset = 0;
-    } /* end if */
-
-    /* Set the layout, fill value, external file list, and data pipeline
-     *  properties for the destination property list
-     */
-    if(H5P_set(dst_plist, H5D_CRT_LAYOUT_NAME, &dst_layout) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set layout")
-    if(H5P_set(dst_plist, H5D_CRT_FILL_VALUE_NAME, &dst_fill) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set fill value")
-    if(H5P_set(dst_plist, H5D_CRT_EXT_FILE_LIST_NAME, &dst_efl) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set external file list")
+    /* Copy new layout message over old one */
+    *layout = new_layout;
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P__dcrt_copy() */
+} /* end H5P__dcrt_layout_set() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5P__dcrt_close
+ * Function:    H5P__dcrt_layout_get
  *
- * Purpose:	Callback routine which is called whenever any dataset create
- *              property list is closed.  This routine performs any generic
- *              cleanup needed on the properties the library put into the list.
+ * Purpose:     Copies a layout property when it's retrieved from a property list
  *
- * Return:	Success:	Non-negative
- *		Failure:	Negative
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
  *
- * Programmer:	Quincey Koziol
- *              Wednesday, July 11, 2001
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
  *
  *-------------------------------------------------------------------------
  */
-/* ARGSUSED */
 static herr_t
-H5P__dcrt_close(hid_t dcpl_id, void H5_ATTR_UNUSED *close_data)
+H5P__dcrt_layout_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
 {
-    H5O_fill_t      fill;               /* Fill value */
-    H5O_efl_t       efl;                /* External file list */
-    H5P_genplist_t *plist;              /* Property list */
+    H5O_layout_t    *layout = (H5O_layout_t *)value; /* Create local aliases for values */
+    H5O_layout_t    new_layout;
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_STATIC
 
-    /* Check arguments */
-    if(NULL == (plist = (H5P_genplist_t *)H5I_object(dcpl_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset creation property list")
+    /* Sanity check */
+    HDassert(value);
 
-    /* Get the fill value, external file list, and data pipeline properties
-     * from the old property list */
-    if(H5P_get(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
-    if(H5P_get(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get external file list")
+    /* Make copy of layout */
+    if(NULL == H5O_msg_copy(H5O_LAYOUT_ID, layout, &new_layout))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy layout")
 
-    /* Clean up any values set for the fill-value and external file-list */
-    if(H5O_msg_reset(H5O_FILL_ID, &fill) < 0)
-        HGOTO_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "can't release fill info")
-    if(H5O_msg_reset(H5O_EFL_ID, &efl) < 0)
-        HGOTO_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "can't release external file list info")
+    /* Copy new layout message over old one */
+    *layout = new_layout;
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P__dcrt_close() */
+} /* end H5P__dcrt_layout_get() */
 
 
 /*-------------------------------------------------------------------------
@@ -440,7 +374,7 @@ H5P__dcrt_layout_enc(const void *value, void **_pp, size_t *size)
     uint8_t **pp = (uint8_t **)_pp;
     uint8_t *tmp_p;
     size_t tmp_size;
-    size_t u;               /* Local index variable */
+    size_t u;                           /* Local index variable */
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_STATIC
@@ -452,16 +386,20 @@ H5P__dcrt_layout_enc(const void *value, void **_pp, size_t *size)
     if(NULL != *pp) {
         /* Encode layout type */
         *(*pp)++ = (uint8_t)layout->type;
+        *size += sizeof(uint8_t);
 
         /* If layout is chunked, encode chunking structure */
         if(H5D_CHUNKED == layout->type) {
             /* Encode rank */
             *(*pp)++ = (uint8_t)layout->u.chunk.ndims;
+            *size += sizeof(uint8_t);
 
             /* Encode chunk dims */
             HDcompile_assert(sizeof(uint32_t) == sizeof(layout->u.chunk.dim[0]));
-            for(u = 0; u < (size_t)layout->u.chunk.ndims; u++)
+            for(u = 0; u < (size_t)layout->u.chunk.ndims; u++) {
                 UINT32ENCODE(*pp, layout->u.chunk.dim[u])
+                *size += sizeof(uint32_t);
+            } /* end for */
         } /* end if */
         else if(H5D_VIRTUAL == layout->type) {
             uint64_t nentries = (uint64_t)layout->storage.u.virt.list_nused;
@@ -485,7 +423,7 @@ H5P__dcrt_layout_enc(const void *value, void **_pp, size_t *size)
                 *size += tmp_size;
 
                 /* Source selection.  Note that we are not passing the real
-                 * allocated size because we do no know it.  H5P__encode should
+                 * allocated size because we do not know it.  H5P__encode should
                  * have verified that the buffer is large enough for the entire
                  * list before we get here. */
                 tmp_size = (size_t)-1;
@@ -503,46 +441,47 @@ H5P__dcrt_layout_enc(const void *value, void **_pp, size_t *size)
             } /* end for */
         } /* end if */
     } /* end if */
-    else if(H5D_VIRTUAL == layout->type) {
-        /* Calculate size of virtual layout info */
-        /* number of entries */
-        *size += (size_t)8;
-
-        /* NULL pointer to pass to H5S_encode */
-        tmp_p = NULL;
-
-        /* Iterate over entries */
-        for(u = 0; u < layout->storage.u.virt.list_nused; u++) {
-            /* Source file name */
-            tmp_size = HDstrlen(layout->storage.u.virt.list[u].source_file_name) + (size_t)1;
-            *size += tmp_size;
-
-            /* Source dataset name */
-            tmp_size = HDstrlen(layout->storage.u.virt.list[u].source_dset_name) + (size_t)1;
-            *size += tmp_size;
-
-            /* Source selection */
-            tmp_size = (size_t)0;
-            if(H5S_encode(layout->storage.u.virt.list[u].source_select, &tmp_p, &tmp_size) < 0)
-                HGOTO_ERROR(H5E_PLIST, H5E_CANTENCODE, FAIL, "unable to serialize source selection")
-            *size += tmp_size;
-
-            /* Virtual dataset selection */
-            tmp_size = (size_t)0;
-            if(H5S_encode(layout->storage.u.virt.list[u].source_dset.virtual_select, &tmp_p, &tmp_size) < 0)
-                HGOTO_ERROR(H5E_PLIST, H5E_CANTENCODE, FAIL, "unable to serialize virtual selection")
-            *size += tmp_size;
-        } /* end for */
-    } /* end if */
+    else {
+        /* Size of layout type */
+        *size += sizeof(uint8_t);
 
-    /* Size of layout type */
-    *size += sizeof(uint8_t);
+        /* If layout is chunked, calculate chunking structure */
+        if(H5D_CHUNKED == layout->type) {
+            *size += sizeof(uint8_t);
+            *size += layout->u.chunk.ndims * sizeof(uint32_t);
+        } /* end if */
+        else if(H5D_VIRTUAL == layout->type) {
+            /* Calculate size of virtual layout info */
+            /* number of entries */
+            *size += (size_t)8;
 
-    /* Size of chunk info encoding */
-    if(H5D_CHUNKED == layout->type) {
-        *size += sizeof(uint8_t);
-        *size += layout->u.chunk.ndims * sizeof(uint32_t);
-    } /* end if */
+            /* NULL pointer to pass to H5S_encode */
+            tmp_p = NULL;
+
+            /* Iterate over entries */
+            for(u = 0; u < layout->storage.u.virt.list_nused; u++) {
+                /* Source file name */
+                tmp_size = HDstrlen(layout->storage.u.virt.list[u].source_file_name) + (size_t)1;
+                *size += tmp_size;
+
+                /* Source dataset name */
+                tmp_size = HDstrlen(layout->storage.u.virt.list[u].source_dset_name) + (size_t)1;
+                *size += tmp_size;
+
+                /* Source selection */
+                tmp_size = (size_t)0;
+                if(H5S_encode(layout->storage.u.virt.list[u].source_select, &tmp_p, &tmp_size) < 0)
+                    HGOTO_ERROR(H5E_PLIST, H5E_CANTENCODE, FAIL, "unable to serialize source selection")
+                *size += tmp_size;
+
+                /* Virtual dataset selection */
+                tmp_size = (size_t)0;
+                if(H5S_encode(layout->storage.u.virt.list[u].source_dset.virtual_select, &tmp_p, &tmp_size) < 0)
+                    HGOTO_ERROR(H5E_PLIST, H5E_CANTENCODE, FAIL, "unable to serialize virtual selection")
+                *size += tmp_size;
+            } /* end for */
+        } /* end if */
+    } /* end else */
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
@@ -743,9 +682,8 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P__dcrt_layout_del(hid_t H5_ATTR_UNUSED prop_id,
-        const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
-        void *value)
+H5P__dcrt_layout_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
 {
     herr_t ret_value = SUCCEED;         /* Return value */
 
@@ -755,15 +693,51 @@ H5P__dcrt_layout_del(hid_t H5_ATTR_UNUSED prop_id,
     HDassert(value);
 
     /* Reset the old layout */
-    if(((H5O_layout_t *)value)->type == H5D_VIRTUAL) /* Temp hack until proper fix is in trunk */
-        if(H5O_msg_reset(H5O_LAYOUT_ID, value) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "can't release layout message")
+    if(H5O_msg_reset(H5O_LAYOUT_ID, value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRESET, FAIL, "can't release layout message")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5P__dcrt_layout_del() */
 
 
+/*--------------------------------------------------------------------------
+ * Function:    H5P__dcrt_layout_copy
+ *
+ * Purpose:     Copy the layout property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Neil Fortner
+ *              Monday, Feb 9, 2015
+ *
+ *--------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_layout_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
+    void *value)
+{
+    H5O_layout_t    *layout = (H5O_layout_t *)value; /* Create local aliases for values */
+    H5O_layout_t    new_layout;
+    herr_t          ret_value = SUCCEED;
+
+    FUNC_ENTER_STATIC
+
+    HDassert(layout);
+
+    /* Make copy of layout */
+    if(NULL == H5O_msg_copy(H5O_LAYOUT_ID, layout, &new_layout))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy layout")
+
+    /* Set new layout message directly into property list */
+    *layout = new_layout;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_layout_copy() */
+
+
 /*-------------------------------------------------------------------------
  * Function:       H5P__dcrt_layout_cmp
  *
@@ -781,7 +755,8 @@ done:
  *-------------------------------------------------------------------------
  */
 static int
-H5P__dcrt_layout_cmp(const void *_layout1, const void *_layout2, size_t H5_ATTR_UNUSED size)
+H5P__dcrt_layout_cmp(const void *_layout1, const void *_layout2,
+    size_t H5_ATTR_UNUSED size)
 {
     const H5O_layout_t *layout1 = (const H5O_layout_t *)_layout1,     /* Create local aliases for values */
         *layout2 = (const H5O_layout_t *)_layout2;
@@ -894,8 +869,8 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P__dcrt_layout_close(const char H5_ATTR_UNUSED *name,
-        size_t H5_ATTR_UNUSED size, void *value)
+H5P__dcrt_layout_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
+    void *value)
 {
     herr_t ret_value = SUCCEED;         /* Return value */
 
@@ -905,9 +880,8 @@ H5P__dcrt_layout_close(const char H5_ATTR_UNUSED *name,
     HDassert(value);
 
     /* Reset the old layout */
-    if(((H5O_layout_t *)value)->type == H5D_VIRTUAL) /* Temp hack until proper fix is in trunk */
-        if(H5O_msg_reset(H5O_LAYOUT_ID, value) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "can't release layout message")
+    if(H5O_msg_reset(H5O_LAYOUT_ID, value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRESET, FAIL, "can't release layout message")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
@@ -915,7 +889,83 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P__fill_value_enc
+ * Function:    H5P__dcrt_fill_value_set
+ *
+ * Purpose:     Copies a fill value property when it's set for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_fill_value_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    H5O_fill_t    *fill = (H5O_fill_t *)value; /* Create local aliases for values */
+    H5O_fill_t    new_fill;
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of fill value */
+    if(NULL == H5O_msg_copy(H5O_FILL_ID, fill, &new_fill))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy fill value")
+
+    /* Copy new fill value message over old one */
+    *fill = new_fill;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_fill_value_set() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__dcrt_fill_value_get
+ *
+ * Purpose:     Copies a fill value property when it's retrieved from a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_fill_value_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    H5O_fill_t    *fill = (H5O_fill_t *)value; /* Create local aliases for values */
+    H5O_fill_t    new_fill;
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of fill value */
+    if(NULL == H5O_msg_copy(H5O_FILL_ID, fill, &new_fill))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy fill value")
+
+    /* Copy new fill value message over old one */
+    *fill = new_fill;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_fill_value_get() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:       H5P__dcrt_fill_value_enc
  *
  * Purpose:        Callback routine which is called whenever the fill value
  *                 property in the dataset creation property list is
@@ -930,14 +980,14 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P__fill_value_enc(const void *value, void **_pp, size_t *size)
+H5P__dcrt_fill_value_enc(const void *value, void **_pp, size_t *size)
 {
     const H5O_fill_t *fill = (const H5O_fill_t *)value; /* Create local aliases for values */
     size_t   dt_size = 0;                 /* Size of encoded datatype */
     herr_t ret_value = SUCCEED;         /* Return value */
     uint8_t **pp = (uint8_t **)_pp;
     uint64_t enc_value;
-    unsigned enc_size;
+    unsigned enc_size = 0;
 
     FUNC_ENTER_STATIC
 
@@ -1006,11 +1056,11 @@ H5P__fill_value_enc(const void *value, void **_pp, size_t *size)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P__fill_value_enc() */
+} /* end H5P__dcrt_fill_value_enc() */
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P__fill_value_dec
+ * Function:       H5P__dcrt_fill_value_dec
  *
  * Purpose:        Callback routine which is called whenever the fill value
  *                 property in the dataset creation property list is
@@ -1025,7 +1075,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P__fill_value_dec(const void **_pp, void *_value)
+H5P__dcrt_fill_value_dec(const void **_pp, void *_value)
 {
     H5O_fill_t *fill = (H5O_fill_t *)_value;   /* Fill value */
     const uint8_t **pp = (const uint8_t **)_pp;
@@ -1073,7 +1123,77 @@ H5P__fill_value_dec(const void **_pp, void *_value)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P__fill_value_dec() */
+} /* end H5P__dcrt_fill_value_dec() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__dcrt_fill_value_del
+ *
+ * Purpose:     Frees memory used to store the fill value property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Neil Fortner
+ *              Thursday, Feb 26, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_fill_value_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Reset the old fill value message */
+    if(H5O_msg_reset(H5O_FILL_ID, value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRESET, FAIL, "can't release fill value message")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_fill_value_del() */
+
+
+/*--------------------------------------------------------------------------
+ * Function:    H5P__dcrt_fill_value_copy
+ *
+ * Purpose:     Copy the fill value property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Neil Fortner
+ *              Thursday, Feb 26, 2015
+ *
+ *--------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_fill_value_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
+    void *value)
+{
+    H5O_fill_t      *fill = (H5O_fill_t *)value; /* Create local aliases for values */
+    H5O_fill_t      new_fill;
+    herr_t          ret_value = SUCCEED;
+
+    FUNC_ENTER_STATIC
+
+    HDassert(fill);
+
+    /* Make copy of fill value message */
+    if(NULL == H5O_msg_copy(H5O_FILL_ID, fill, &new_fill))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy fill value")
+
+    /* Set new fill value message directly into property list */
+    *fill = new_fill;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_fill_value_copy() */
 
 
 /*-------------------------------------------------------------------------
@@ -1092,7 +1212,8 @@ done:
  *-------------------------------------------------------------------------
  */
 int
-H5P_fill_value_cmp(const void *_fill1, const void *_fill2, size_t H5_ATTR_UNUSED size)
+H5P_fill_value_cmp(const void *_fill1, const void *_fill2,
+    size_t H5_ATTR_UNUSED size)
 {
     const H5O_fill_t *fill1 = (const H5O_fill_t *)_fill1,     /* Create local aliases for values */
         *fill2 = (const H5O_fill_t *)_fill2;
@@ -1138,6 +1259,115 @@ done:
 
 
 /*-------------------------------------------------------------------------
+ * Function:    H5P__dcrt_fill_value_close
+ *
+ * Purpose:     Frees memory used to store the fill value property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Neil Fortner
+ *              Thursday, Feb 26, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_fill_value_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
+    void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Reset the old fill value message */
+    if(H5O_msg_reset(H5O_FILL_ID, value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRESET, FAIL, "can't release fill value message")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_fill_value_close() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__dcrt_ext_file_list_set
+ *
+ * Purpose:     Copies an external file list property when it's set for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_ext_file_list_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    H5O_efl_t    *efl = (H5O_efl_t *)value; /* Create local aliases for values */
+    H5O_efl_t    new_efl;
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of external file list */
+    if(NULL == H5O_msg_copy(H5O_EFL_ID, efl, &new_efl))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy external file list")
+
+    /* Copy new external file list message over old one */
+    *efl = new_efl;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_ext_file_list_set() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__dcrt_ext_file_list_get
+ *
+ * Purpose:     Copies an external file lsit property when it's retrieved from a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_ext_file_list_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    H5O_efl_t    *efl = (H5O_efl_t *)value; /* Create local aliases for values */
+    H5O_efl_t    new_efl;
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of external file list */
+    if(NULL == H5O_msg_copy(H5O_EFL_ID, efl, &new_efl))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy external file list")
+
+    /* Copy new external file list message over old one */
+    *efl = new_efl;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_ext_file_list_get() */
+
+
+/*-------------------------------------------------------------------------
  * Function:       H5P__dcrt_ext_file_list_enc
  *
  * Purpose:        Callback routine which is called whenever the efl
@@ -1313,6 +1543,76 @@ done:
 
 
 /*-------------------------------------------------------------------------
+ * Function:    H5P__dcrt_ext_file_list_del
+ *
+ * Purpose:     Frees memory used to store the efl property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Neil Fortner
+ *              Thursday, Feb 26, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_ext_file_list_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Reset the old efl message */
+    if(H5O_msg_reset(H5O_EFL_ID, value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRESET, FAIL, "can't release external file list message")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_ext_file_list_del() */
+
+
+/*--------------------------------------------------------------------------
+ * Function:    H5P__dcrt_ext_file_list_copy
+ *
+ * Purpose:     Copy the efl property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Neil Fortner
+ *              Thurday, Feb 26, 2015
+ *
+ *--------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_ext_file_list_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
+    void *value)
+{
+    H5O_efl_t       *efl = (H5O_efl_t *)value; /* Create local aliases for values */
+    H5O_efl_t       new_efl;
+    herr_t          ret_value = SUCCEED;
+
+    FUNC_ENTER_STATIC
+
+    HDassert(efl);
+
+    /* Make copy of efl message */
+    if(NULL == H5O_msg_copy(H5O_EFL_ID, efl, &new_efl))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy external file list")
+
+    /* Set new efl message directly into property list */
+    *efl = new_efl;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_ext_file_list_copy() */
+
+
+/*-------------------------------------------------------------------------
  * Function:       H5P__dcrt_ext_file_list_cmp
  *
  * Purpose:        Callback routine which is called whenever the external file
@@ -1329,7 +1629,8 @@ done:
  *-------------------------------------------------------------------------
  */
 static int
-H5P__dcrt_ext_file_list_cmp(const void *_efl1, const void *_efl2, size_t H5_ATTR_UNUSED size)
+H5P__dcrt_ext_file_list_cmp(const void *_efl1, const void *_efl2,
+    size_t H5_ATTR_UNUSED size)
 {
     const H5O_efl_t *efl1 = (const H5O_efl_t *)_efl1,     /* Create local aliases for values */
         *efl2 = (const H5O_efl_t *)_efl2;
@@ -1394,6 +1695,39 @@ done:
 
 
 /*-------------------------------------------------------------------------
+ * Function:    H5P__dcrt_ext_file_list_close
+ *
+ * Purpose:     Frees memory used to store the efl property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Neil Fortner
+ *              Thursday, Feb 26, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dcrt_ext_file_list_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
+    void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Reset the old efl message */
+    if(H5O_msg_reset(H5O_EFL_ID, value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRESET, FAIL, "can't release external file list message")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dcrt_ext_file_list_close() */
+
+
+/*-------------------------------------------------------------------------
  * Function:  H5P__set_layout
  *
  * Purpose:   Sets the layout of raw data in the file.
@@ -1408,7 +1742,6 @@ done:
 static herr_t
 H5P__set_layout(H5P_genplist_t *plist, const H5O_layout_t *layout)
 {
-    H5O_layout_t old_layout;            /* Layout propertry already on list */
     unsigned alloc_time_state;          /* State of allocation time property */
     herr_t ret_value = SUCCEED;         /* return value */
 
@@ -1420,10 +1753,10 @@ H5P__set_layout(H5P_genplist_t *plist, const H5O_layout_t *layout)
 
     /* If we still have the "default" allocation time, change it according to the new layout */
     if(alloc_time_state) {
-        H5O_fill_t fill;            /* Fill value */
+        H5O_fill_t fill;                    /* Fill value */
 
         /* Get current fill value info */
-        if(H5P_get(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+        if(H5P_peek(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
 
         /* Set the default based on layout */
@@ -1437,9 +1770,6 @@ H5P__set_layout(H5P_genplist_t *plist, const H5O_layout_t *layout)
                 break;
 
             case H5D_CHUNKED:
-                fill.alloc_time = H5D_ALLOC_TIME_INCR;
-                break;
-
             case H5D_VIRTUAL:
                 fill.alloc_time = H5D_ALLOC_TIME_INCR;
                 break;
@@ -1451,18 +1781,10 @@ H5P__set_layout(H5P_genplist_t *plist, const H5O_layout_t *layout)
         } /* end switch */
 
         /* Set updated fill value info */
-        if(H5P_set(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+        if(H5P_poke(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set space allocation time")
     } /* end if */
 
-    /* Get the old layout */
-    if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &old_layout) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get layout")
-
-    /* Reset the old layout before overwriting it */
-    if(H5O_msg_reset(H5O_LAYOUT_ID, &old_layout) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "can't release layout message")
-
     /* Set layout value */
     if(H5P_set(plist, H5D_CRT_LAYOUT_NAME, layout) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't set layout")
@@ -1627,8 +1949,8 @@ H5Pget_layout(hid_t plist_id)
     if(NULL == (plist = H5P_object_verify(plist_id, H5P_DATASET_CREATE)))
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, H5D_LAYOUT_ERROR, "can't find object for ID")
 
-    /* Get layout property */
-    if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
+    /* Peek at layout property */
+    if(H5P_peek(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, H5D_LAYOUT_ERROR, "can't get layout")
 
     /* Set return value */
@@ -1759,8 +2081,8 @@ H5Pget_chunk(hid_t plist_id, int max_ndims, hsize_t dim[]/*out*/)
     if(NULL == (plist = H5P_object_verify(plist_id, H5P_DATASET_CREATE)))
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
-    /* Retrieve the layout property */
-    if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
+    /* Peek at the layout property */
+    if(H5P_peek(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't get layout")
     if(H5D_CHUNKED != layout.type)
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "not a chunked storage layout")
@@ -1805,15 +2127,15 @@ herr_t
 H5Pset_virtual(hid_t dcpl_id, hid_t vspace_id, const char *src_file_name,
     const char *src_dset_name, hid_t src_space_id)
 {
-    H5P_genplist_t *plist;      /* Property list pointer */
-    H5O_layout_t layout;        /* Layout information for setting chunk info */
-    H5S_t *vspace;              /* Virtual dataset space selection */
-    H5S_t *src_space;           /* Source dataset space selection */
-    hbool_t new_layout = FALSE; /* Whether we are adding a new virtual layout message to plist */
-    H5O_storage_virtual_ent_t *ent = NULL; /* Convenience pointer to new VDS entry */
-    hbool_t adding_entry = FALSE; /* Whether we are in the middle of adding an entry */
+    H5P_genplist_t *plist;          /* Property list pointer */
+    H5O_layout_t virtual_layout;    /* Layout information for setting virtual info */
+    H5S_t *vspace;                  /* Virtual dataset space selection */
+    H5S_t *src_space;               /* Source dataset space selection */
     H5O_storage_virtual_ent_t *old_list = NULL; /* List pointer previously on property list */
-    herr_t ret_value = SUCCEED; /* Return value */
+    H5O_storage_virtual_ent_t *ent = NULL; /* Convenience pointer to new VDS entry */
+    hbool_t adding_entry = FALSE;   /* Whether we are in the middle of adding an entry */
+    hbool_t free_list = FALSE;      /* Whether to free the list of virtual entries */
+    herr_t ret_value = SUCCEED;     /* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE5("e", "ii*s*si", dcpl_id, vspace_id, src_file_name, src_dset_name,
@@ -1821,17 +2143,17 @@ H5Pset_virtual(hid_t dcpl_id, hid_t vspace_id, const char *src_file_name,
 
     /* Check arguments */
     if(!src_file_name)
-        HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "source file name not provided")
+        HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "source file name not provided")
     if(!src_dset_name)
-        HGOTO_ERROR(H5E_ARGS, H5E_BADRANGE, FAIL, "source dataset name not provided")
+        HGOTO_ERROR(H5E_PLIST, H5E_BADRANGE, FAIL, "source dataset name not provided")
     if(NULL == (vspace = (H5S_t *)H5I_object_verify(vspace_id, H5I_DATASPACE)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataspace")
+        HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a dataspace")
     if(NULL == (src_space = (H5S_t *)H5I_object_verify(src_space_id, H5I_DATASPACE)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataspace")
+        HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a dataspace")
 
     /* Check selections for validity */
     if(H5D_virtual_check_mapping_pre(vspace, src_space, H5O_VIRTUAL_STATUS_USER) < 0)
-        HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid mapping selections")
+        HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "invalid mapping selections")
 
 #ifndef H5_HAVE_C99_DESIGNATED_INITIALIZER
     /* If the compiler doesn't support C99 designated initializers, check if
@@ -1847,41 +2169,41 @@ H5Pset_virtual(hid_t dcpl_id, hid_t vspace_id, const char *src_file_name,
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get the current layout */
-    if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
+    if(H5P_peek(plist, H5D_CRT_LAYOUT_NAME, &virtual_layout) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get layout")
 
     /* If the layout was not already virtual, Start with default virtual layout.
      * Otherwise, add the mapping to the current list. */
-    if(layout.type == H5D_VIRTUAL)
+    if(virtual_layout.type == H5D_VIRTUAL)
         /* Save old list pointer for error recovery */
-        old_list = layout.storage.u.virt.list;
+        old_list = virtual_layout.storage.u.virt.list;
     else {
-        new_layout = TRUE;
-        HDmemcpy(&layout, &H5D_def_layout_virtual_g, sizeof(H5D_def_layout_virtual_g));
+        /* Reset the old layout */
+        if(H5O_msg_reset(H5O_LAYOUT_ID, &virtual_layout) < 0)
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTRESET, FAIL, "can't release layout message")
+
+        /* Copy the default virtual layout */
+        HDmemcpy(&virtual_layout, &H5D_def_layout_virtual_g, sizeof(H5D_def_layout_virtual_g));
 
-        HDassert(layout.storage.u.virt.list_nalloc == 0);
+        /* Sanity check */
+        HDassert(virtual_layout.storage.u.virt.list_nalloc == 0);
     } /* end else */
 
     /* Expand list if necessary */
-    if(layout.storage.u.virt.list_nalloc == 0) {
-        /* Allocate initial entry list */
-        if(NULL == (layout.storage.u.virt.list = (H5O_storage_virtual_ent_t *)H5MM_calloc(H5D_VIRTUAL_DEF_LIST_SIZE * sizeof(H5O_storage_virtual_ent_t))))
-            HGOTO_ERROR(H5E_PLIST, H5E_RESOURCE, FAIL, "can't allocate virtual dataset mapping list")
-        adding_entry = TRUE;
-        layout.storage.u.virt.list_nalloc = H5D_VIRTUAL_DEF_LIST_SIZE;
-    } /* end if */
-    else if(layout.storage.u.virt.list_nused
-            == layout.storage.u.virt.list_nalloc) {
-        /* Double size of entry list.  Make sure to zero out new memory. */
-        if(NULL == (layout.storage.u.virt.list = (H5O_storage_virtual_ent_t *)H5MM_realloc(layout.storage.u.virt.list, (size_t)2 * layout.storage.u.virt.list_nalloc * sizeof(H5O_storage_virtual_ent_t))))
+    if(virtual_layout.storage.u.virt.list_nused == virtual_layout.storage.u.virt.list_nalloc) {
+        H5O_storage_virtual_ent_t *x;           /* Pointer to the new list */
+        size_t new_alloc = MAX(H5D_VIRTUAL_DEF_LIST_SIZE, virtual_layout.storage.u.virt.list_nalloc * 2);
+
+        /* Expand size of entry list */
+        if(NULL == (x = (H5O_storage_virtual_ent_t *)H5MM_realloc(virtual_layout.storage.u.virt.list, new_alloc * sizeof(H5O_storage_virtual_ent_t))))
             HGOTO_ERROR(H5E_PLIST, H5E_RESOURCE, FAIL, "can't reallocate virtual dataset mapping list")
-        adding_entry = TRUE;
-        (void)HDmemset(layout.storage.u.virt.list + layout.storage.u.virt.list_nalloc, 0, layout.storage.u.virt.list_nalloc * sizeof(H5O_storage_virtual_ent_t));
-        layout.storage.u.virt.list_nalloc *= (size_t)2;
+        virtual_layout.storage.u.virt.list = x;
+        virtual_layout.storage.u.virt.list_nalloc = new_alloc;
     } /* end if */
 
     /* Add virtual dataset mapping entry */
-    ent = &layout.storage.u.virt.list[layout.storage.u.virt.list_nused];
+    ent = &virtual_layout.storage.u.virt.list[virtual_layout.storage.u.virt.list_nused];
+    HDmemset(ent, 0, sizeof(H5O_storage_virtual_ent_t));        /* Clear before starting to set up */
     if(NULL == (ent->source_dset.virtual_select = H5S_copy(vspace, FALSE, TRUE)))
         HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "unable to copy virtual selection")
     adding_entry = TRUE;
@@ -1923,59 +2245,42 @@ H5Pset_virtual(hid_t dcpl_id, hid_t vspace_id, const char *src_file_name,
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid mapping entry")
 
     /* Update min_dims */
-    if(H5D_virtual_update_min_dims(&layout, layout.storage.u.virt.list_nused) < 0)
+    if(H5D_virtual_update_min_dims(&virtual_layout, virtual_layout.storage.u.virt.list_nused) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "unable to update virtual dataset minimum dimensions")
 
     /* Finish adding entry */
-    layout.storage.u.virt.list_nused++;
+    virtual_layout.storage.u.virt.list_nused++;
+
+    /* Set VDS layout information in property list */
+    if(H5P_poke(plist, H5D_CRT_LAYOUT_NAME, &virtual_layout) < 0) {
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set layout")
+        if(old_list != virtual_layout.storage.u.virt.list)
+            free_list = TRUE;
+    } /* end if */
 
 done:
-    /* Only need to do things if we started to add an entry */
-    if(adding_entry) {
-        hbool_t free_list = FALSE;
-
-        /* Set VDS layout information in property list.  If we are adding a new
-         * layout, use H5P__set_layout so other fields are initialized properly.
-         * If we are extending the layout, just use H5P_set directly so we don't
-         * mess with anything else.  Put this after the done: label because the
-         * original list may no longer be valid due to the use of realloc(), so
-         * we want to make sure the list is available if possible. */
-        if(new_layout) {
-            if(H5P__set_layout(plist, &layout) < 0) {
-                HDONE_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set layout")
-                free_list = TRUE;
-            } /* end if */
+    /* Check if the entry has been partly allocated but not added to the
+     * property list or not included in list_nused */
+    if(ret_value < 0) {
+        /* Free incomplete entry if present */
+        if(ent) {
+            ent->source_file_name = (char *)H5MM_xfree(ent->source_file_name);
+            ent->source_dset_name = (char *)H5MM_xfree(ent->source_dset_name);
+            if(ent->source_dset.virtual_select && H5S_close(ent->source_dset.virtual_select) < 0)
+                HDONE_ERROR(H5E_DATASET, H5E_CLOSEERROR, FAIL, "unable to release virtual selection")
+            ent->source_dset.virtual_select = NULL;
+            if(ent->source_select && H5S_close(ent->source_select) < 0)
+                HDONE_ERROR(H5E_DATASET, H5E_CLOSEERROR, FAIL, "unable to release source selection")
+            ent->source_select = NULL;
+            H5D_virtual_free_parsed_name(ent->parsed_source_file_name);
+            ent->parsed_source_file_name = NULL;
+            H5D_virtual_free_parsed_name(ent->parsed_source_dset_name);
+            ent->parsed_source_dset_name = NULL;
         } /* end if */
-        else
-            if(H5P_set(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0) {
-                HDONE_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set layout")
-                if(old_list != layout.storage.u.virt.list)
-                    free_list = TRUE;
-            } /* end if */
 
-        /* Check if the entry has been partly allocated but not added to the
-         * property list or not included in list_nused */
-        if(ret_value < 0) {
-            /* Free incomplete entry if present */
-            if(ent) {
-                ent->source_file_name = (char *)H5MM_xfree(ent->source_file_name);
-                ent->source_dset_name = (char *)H5MM_xfree(ent->source_dset_name);
-                if(ent->source_dset.virtual_select && H5S_close(ent->source_dset.virtual_select) < 0)
-                    HDONE_ERROR(H5E_DATASET, H5E_CLOSEERROR, FAIL, "unable to release virtual selection")
-                ent->source_dset.virtual_select = NULL;
-                if(ent->source_select && H5S_close(ent->source_select) < 0)
-                    HDONE_ERROR(H5E_DATASET, H5E_CLOSEERROR, FAIL, "unable to release source selection")
-                ent->source_select = NULL;
-                H5D_virtual_free_parsed_name(ent->parsed_source_file_name);
-                ent->parsed_source_file_name = NULL;
-                H5D_virtual_free_parsed_name(ent->parsed_source_dset_name);
-                ent->parsed_source_dset_name = NULL;
-            } /* end if */
-
-            /* Free list if necessary */
-            if(free_list)
-                layout.storage.u.virt.list = (H5O_storage_virtual_ent_t *)H5MM_xfree(layout.storage.u.virt.list);
-        } /* end if */
+        /* Free list if necessary */
+        if(free_list)
+            virtual_layout.storage.u.virt.list = (H5O_storage_virtual_ent_t *)H5MM_xfree(virtual_layout.storage.u.virt.list);
     } /* end if */
 
     FUNC_LEAVE_API(ret_value)
@@ -2012,7 +2317,7 @@ H5Pget_virtual_count(hid_t dcpl_id, size_t *count/*out*/)
             HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
         /* Retrieve the layout property */
-        if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
+        if(H5P_peek(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't get layout")
         if(H5D_VIRTUAL != layout.type)
             HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "not a virtual storage layout")
@@ -2058,7 +2363,7 @@ H5Pget_virtual_vspace(hid_t dcpl_id, size_t index)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Retrieve the layout property */
-    if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
+    if(H5P_peek(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't get layout")
     if(H5D_VIRTUAL != layout.type)
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "not a virtual storage layout")
@@ -2106,7 +2411,7 @@ H5Pget_virtual_srcspace(hid_t dcpl_id, size_t index)
     H5P_genplist_t *plist;      /* Property list pointer */
     H5O_layout_t layout;        /* Layout information */
     H5S_t *space = NULL;        /* Dataspace pointer */
-    hid_t ret_value;            /* Return value */
+    hid_t ret_value = FAIL;     /* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE2("i", "iz", dcpl_id, index);
@@ -2116,7 +2421,7 @@ H5Pget_virtual_srcspace(hid_t dcpl_id, size_t index)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Retrieve the layout property */
-    if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
+    if(H5P_peek(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't get layout")
     if(H5D_VIRTUAL != layout.type)
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "not a virtual storage layout")
@@ -2130,8 +2435,7 @@ H5Pget_virtual_srcspace(hid_t dcpl_id, size_t index)
      * H5O_VIRTUAL_STATUS_CORRECT?  -NAF */
     /* If source space status is H5O_VIRTUAL_STATUS_INVALID, patch with bounds
      * of selection */
-    if((layout.storage.u.virt.list[index].source_space_status
-            == H5O_VIRTUAL_STATUS_INVALID)
+    if((H5O_VIRTUAL_STATUS_INVALID == layout.storage.u.virt.list[index].source_space_status)
             && (layout.storage.u.virt.list[index].unlim_dim_source < 0)) {
         hsize_t bounds_start[H5S_MAX_RANK];
         hsize_t bounds_end[H5S_MAX_RANK];
@@ -2221,7 +2525,7 @@ H5Pget_virtual_filename(hid_t dcpl_id, size_t index, char *name/*out*/,
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Retrieve the layout property */
-    if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
+    if(H5P_peek(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't get layout")
     if(H5D_VIRTUAL != layout.type)
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "not a virtual storage layout")
@@ -2284,7 +2588,7 @@ H5Pget_virtual_dsetname(hid_t dcpl_id, size_t index, char *name/*out*/,
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Retrieve the layout property */
-    if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
+    if(H5P_peek(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't get layout")
     if(H5D_VIRTUAL != layout.type)
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "not a virtual storage layout")
@@ -2348,7 +2652,7 @@ H5Pset_external(hid_t plist_id, const char *name, off_t offset, hsize_t size)
     if(NULL == (plist = H5P_object_verify(plist_id, H5P_DATASET_CREATE)))
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
-    if(H5P_get(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
+    if(H5P_peek(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get external file list")
     if(efl.nused > 0 && H5O_EFL_UNLIMITED == efl.slot[efl.nused - 1].size)
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "previous file size is unlimited")
@@ -2361,7 +2665,6 @@ H5Pset_external(hid_t plist_id, const char *name, off_t offset, hsize_t size)
         } /* end for */
     } /* end if */
 
-
     /* Add to the list */
     if(efl.nused >= efl.nalloc) {
         size_t na = efl.nalloc + H5O_EFL_ALLOC;
@@ -2379,7 +2682,7 @@ H5Pset_external(hid_t plist_id, const char *name, off_t offset, hsize_t size)
     efl.slot[idx].size = size;
     efl.nused++;
 
-    if(H5P_set(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
+    if(H5P_poke(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set external file list")
 
 done:
@@ -2423,7 +2726,7 @@ H5Pget_external_count(hid_t plist_id)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get value */
-    if(H5P_get(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
+    if(H5P_peek(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get external file list")
 
     /* Set return value */
@@ -2481,7 +2784,7 @@ H5Pget_external(hid_t plist_id, unsigned idx, size_t name_size, char *name/*out*
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get value */
-    if(H5P_get(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
+    if(H5P_peek(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get external file list")
 
     if(idx >= efl.nused)
@@ -2560,11 +2863,11 @@ H5Pset_szip(hid_t plist_id, unsigned options_mask, unsigned pixels_per_block)
     cd_values[1]=pixels_per_block;
 
     /* Add the filter */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
     if(H5Z_append(&pline, H5Z_FILTER_SZIP, H5Z_FLAG_OPTIONAL, (size_t)2, cd_values) < 0)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to add szip filter to pipeline")
-    if(H5P_set(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_poke(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to set pipeline")
 
 done:
@@ -2607,11 +2910,11 @@ H5Pset_shuffle(hid_t plist_id)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Add the filter */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
     if(H5Z_append(&pline, H5Z_FILTER_SHUFFLE, H5Z_FLAG_OPTIONAL, (size_t)0, NULL) < 0)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to shuffle the data")
-    if(H5P_set(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_poke(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to set pipeline")
 
 done:
@@ -2653,11 +2956,11 @@ H5Pset_nbit(hid_t plist_id)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Add the nbit filter */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
     if(H5Z_append(&pline, H5Z_FILTER_NBIT, H5Z_FLAG_OPTIONAL, (size_t)0, NULL) < 0)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to add nbit filter to pipeline")
-    if(H5P_set(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_poke(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to set pipeline")
 
 done:
@@ -2732,11 +3035,11 @@ H5Pset_scaleoffset(hid_t plist_id, H5Z_SO_scale_type_t scale_type, int scale_fac
     cd_values[1] = (unsigned)scale_factor;
 
     /* Add the scaleoffset filter */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
     if(H5Z_append(&pline, H5Z_FILTER_SCALEOFFSET, H5Z_FLAG_OPTIONAL, (size_t)2, cd_values) < 0)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to add scaleoffset filter to pipeline")
-    if(H5P_set(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_poke(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to set pipeline")
 
 done:
@@ -2776,7 +3079,7 @@ H5Pset_fill_value(hid_t plist_id, hid_t type_id, const void *value)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get the current fill value */
-    if(H5P_get(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+    if(H5P_peek(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
 
     /* Release the dynamic fill value components */
@@ -2826,7 +3129,7 @@ H5Pset_fill_value(hid_t plist_id, hid_t type_id, const void *value)
         fill.size = (-1);
 
     /* Update fill value in property list */
-    if(H5P_set(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+    if(H5P_poke(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't set fill value")
 
 done:
@@ -2870,7 +3173,7 @@ H5P_get_fill_value(H5P_genplist_t *plist, const H5T_t *type, void *value/*out*/,
      * datatype conversion might not have resulted in zero.  If fill value
      * is undefined, also return error.
      */
-    if(H5P_get(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+    if(H5P_peek(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
     if(fill.size == -1)
 	HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "fill value is undefined")
@@ -2882,8 +3185,8 @@ H5P_get_fill_value(H5P_genplist_t *plist, const H5T_t *type, void *value/*out*/,
     } /* end if */
 
      /*
-     * Can we convert between the source and destination datatypes?
-     */
+      * Can we convert between the source and destination datatypes?
+      */
     if(NULL == (tpath = H5T_path_find(fill.type, type, NULL, NULL, dxpl_id, FALSE)))
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "unable to convert between src and dst datatypes")
     if((src_id = H5I_register(H5I_DATATYPE, H5T_copy(fill.type, H5T_COPY_TRANSIENT), FALSE)) < 0)
@@ -3038,7 +3341,7 @@ H5P_fill_value_defined(H5P_genplist_t *plist, H5D_fill_value_t *status)
     HDassert(status);
 
     /* Get the fill value struct */
-    if(H5P_get(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+    if(H5P_peek(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
 
     /* Get the fill-value status */
@@ -3126,8 +3429,8 @@ H5Pset_alloc_time(hid_t plist_id, H5D_alloc_time_t alloc_time)
     if(alloc_time == H5D_ALLOC_TIME_DEFAULT) {
         H5O_layout_t layout;            /* Type of storage layout */
 
-        /* Retrieve the storage layout */
-        if(H5P_get(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
+        /* Peek at the storage layout */
+        if(H5P_peek(plist, H5D_CRT_LAYOUT_NAME, &layout) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get layout")
 
         /* Set the default based on layout */
@@ -3162,14 +3465,14 @@ H5Pset_alloc_time(hid_t plist_id, H5D_alloc_time_t alloc_time)
         alloc_time_state = 0;
 
     /* Retrieve previous fill value settings */
-    if(H5P_get(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+    if(H5P_peek(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
 
     /* Update property value */
     fill.alloc_time = alloc_time;
 
     /* Set values */
-    if(H5P_set(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+    if(H5P_poke(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set fill value")
     if(H5P_set(plist, H5D_CRT_ALLOC_TIME_STATE_NAME, &alloc_time_state) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set space allocation time")
@@ -3211,7 +3514,7 @@ H5Pget_alloc_time(hid_t plist_id, H5D_alloc_time_t *alloc_time/*out*/)
             HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
         /* Retrieve fill value settings */
-        if(H5P_get(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+        if(H5P_peek(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
 
         /* Set user's value */
@@ -3255,14 +3558,14 @@ H5Pset_fill_time(hid_t plist_id, H5D_fill_time_t fill_time)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Retrieve previous fill value settings */
-    if(H5P_get(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+    if(H5P_peek(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
 
     /* Update property value */
     fill.fill_time = fill_time;
 
     /* Set values */
-    if(H5P_set(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+    if(H5P_poke(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set fill value")
 
 done:
@@ -3304,7 +3607,7 @@ H5Pget_fill_time(hid_t plist_id, H5D_fill_time_t *fill_time/*out*/)
             HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
         /* Retrieve fill value settings */
-        if(H5P_get(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
+        if(H5P_peek(plist, H5D_CRT_FILL_VALUE_NAME, &fill) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fill value")
 
         /* Set user's value */
diff --git a/src/H5Pdeprec.c b/src/H5Pdeprec.c
index e4e91ac..ecf2bea 100644
--- a/src/H5Pdeprec.c
+++ b/src/H5Pdeprec.c
@@ -31,10 +31,7 @@
 /* Module Setup */
 /****************/
 
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5P__init_deprec_interface
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -82,51 +79,6 @@
 /*******************/
 
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5P__init_deprec_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5P__init_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5P_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5P__init_deprec_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5P_init())
-} /* H5P__init_deprec_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5P__term_deprec_interface -- Terminate interface
-USAGE
-    herr_t H5P__term_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5P__term_deprec_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5P__term_deprec_interface() */
-
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 
 /*--------------------------------------------------------------------------
diff --git a/src/H5Pdxpl.c b/src/H5Pdxpl.c
index 980b001..9ab3580 100644
--- a/src/H5Pdxpl.c
+++ b/src/H5Pdxpl.c
@@ -27,7 +27,8 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -152,6 +153,8 @@
 /* Definitions for data transform property */
 #define H5D_XFER_XFORM_SIZE         sizeof(void *)
 #define H5D_XFER_XFORM_DEF          NULL
+#define H5D_XFER_XFORM_SET          H5P__dxfr_xform_set
+#define H5D_XFER_XFORM_GET          H5P__dxfr_xform_get
 #define H5D_XFER_XFORM_ENC          H5P__dxfr_xform_enc
 #define H5D_XFER_XFORM_DEC          H5P__dxfr_xform_dec
 #define H5D_XFER_XFORM_DEL          H5P__dxfr_xform_del
@@ -203,6 +206,8 @@ static herr_t H5P__dxfr_mpio_chunk_opt_hard_enc(const void *value, void **pp, si
 static herr_t H5P__dxfr_mpio_chunk_opt_hard_dec(const void **pp, void *value);
 static herr_t H5P__dxfr_edc_enc(const void *value, void **pp, size_t *size);
 static herr_t H5P__dxfr_edc_dec(const void **pp, void *value);
+static herr_t H5P__dxfr_xform_set(hid_t prop_id, const char* name, size_t size, void* value);
+static herr_t H5P__dxfr_xform_get(hid_t prop_id, const char* name, size_t size, void* value);
 static herr_t H5P__dxfr_xform_enc(const void *value, void **pp, size_t *size);
 static herr_t H5P__dxfr_xform_dec(const void **pp, void *value);
 static herr_t H5P__dxfr_xform_del(hid_t prop_id, const char* name, size_t size, void* value);
@@ -443,7 +448,7 @@ H5P__dxfr_reg_prop(H5P_genclass_t *pclass)
 
     /* Register the data transform property */
     if(H5P_register_real(pclass, H5D_XFER_XFORM_NAME, H5D_XFER_XFORM_SIZE, &H5D_def_xfer_xform_g,
-            NULL, NULL, NULL, H5D_XFER_XFORM_ENC, H5D_XFER_XFORM_DEC, 
+            NULL, H5D_XFER_XFORM_SET, H5D_XFER_XFORM_GET, H5D_XFER_XFORM_ENC, H5D_XFER_XFORM_DEC, 
             H5D_XFER_XFORM_DEL, H5D_XFER_XFORM_COPY, H5D_XFER_XFORM_CMP, H5D_XFER_XFORM_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
@@ -651,6 +656,72 @@ done:
 
 
 /*-------------------------------------------------------------------------
+ * Function:    H5P__dxfr_xform_set
+ *
+ * Purpose:     Copies a data transform property when it's set for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dxfr_xform_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of data transform */
+    if(H5Z_xform_copy((H5Z_data_xform_t **)value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "error copying the data transform info")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dxfr_xform_set() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__dxfr_xform_get
+ *
+ * Purpose:     Copies a data transform property when it's retrieved for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__dxfr_xform_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of data transform */
+    if(H5Z_xform_copy((H5Z_data_xform_t **)value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "error copying the data transform info")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__dxfr_xform_get() */
+
+
+/*-------------------------------------------------------------------------
  * Function:       H5P__dxfr_xform_enc
  *
  * Purpose:        Callback routine which is called whenever the data transform
@@ -827,10 +898,12 @@ H5P__dxfr_xform_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size
 
     FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(value);
 
+    /* Make copy of data transform */
     if(H5Z_xform_copy((H5Z_data_xform_t **)value) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTCLOSEOBJ, FAIL, "error copying the data transform info")
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "error copying the data transform info")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
@@ -953,7 +1026,7 @@ H5Pset_data_transform(hid_t plist_id, const char *expression)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* See if a data transform is already set, and free it if it is */
-    if(H5P_get(plist, H5D_XFER_XFORM_NAME, &data_xform_prop) < 0)
+    if(H5P_peek(plist, H5D_XFER_XFORM_NAME, &data_xform_prop) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "error getting data transform expression")
 
     /* Destroy previous data transform property */
@@ -964,15 +1037,14 @@ H5Pset_data_transform(hid_t plist_id, const char *expression)
     if(NULL == (data_xform_prop = H5Z_xform_create(expression)))
         HGOTO_ERROR(H5E_PLINE, H5E_NOSPACE, FAIL, "unable to create data transform info")
 
-    /* Update property list */
-    if(H5P_set(plist, H5D_XFER_XFORM_NAME, &data_xform_prop) < 0)
+    /* Update property list (takes ownership of transform) */
+    if(H5P_poke(plist, H5D_XFER_XFORM_NAME, &data_xform_prop) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "Error setting data transform expression")
 
 done:
-    if(ret_value <  0) {
+    if(ret_value < 0)
         if(data_xform_prop && H5Z_xform_destroy(data_xform_prop) <  0)
             HDONE_ERROR(H5E_PLINE, H5E_CLOSEERROR, FAIL, "unable to release data transform expression")
-    } /* end if */
 
     FUNC_LEAVE_API(ret_value)
 } /* end H5Pset_data_transform() */
@@ -1016,7 +1088,7 @@ H5Pget_data_transform(hid_t plist_id, char *expression /*out*/, size_t size)
     if(NULL == (plist = H5P_object_verify(plist_id, H5P_DATASET_XFER)))
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
-    if(H5P_get(plist, H5D_XFER_XFORM_NAME, &data_xform_prop) < 0)
+    if(H5P_peek(plist, H5D_XFER_XFORM_NAME, &data_xform_prop) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "error getting data transform expression")
 
     if(NULL == data_xform_prop)
@@ -1026,6 +1098,7 @@ H5Pget_data_transform(hid_t plist_id, char *expression /*out*/, size_t size)
     if(NULL == (pexp = H5Z_xform_extract_xform_str(data_xform_prop)))
 	HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "failed to retrieve transform expression")
 
+    /* Copy into application buffer */
     len = HDstrlen(pexp);
     if(expression) {
 	HDstrncpy(expression, pexp, MIN(len + 1, size));
@@ -1036,11 +1109,6 @@ H5Pget_data_transform(hid_t plist_id, char *expression /*out*/, size_t size)
     ret_value = (ssize_t)len;
 
 done:
-    if(ret_value < 0) {
-	if(data_xform_prop && H5Z_xform_destroy(data_xform_prop) < 0)
-            HDONE_ERROR(H5E_PLINE, H5E_CLOSEERROR, FAIL, "unable to release data transform expression")
-    } /* end if */
-
     FUNC_LEAVE_API(ret_value)
 } /* end H5Pget_data_transform() */
 
diff --git a/src/H5Pencdec.c b/src/H5Pencdec.c
index bd0a260..1bcd19c 100644
--- a/src/H5Pencdec.c
+++ b/src/H5Pencdec.c
@@ -22,12 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
-
-#ifdef NOT_YET
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5P_init_encdec_interface
-#endif /* NOT_YET */
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -82,29 +77,6 @@ typedef struct {
 /*******************/
 
 
-#ifdef NOT_YET
-
-/*--------------------------------------------------------------------------
-NAME
-   H5P_init_encdec_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5P_init_encdec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5P_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5P_init_encdec_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5P_init())
-} /* H5P_init_encdec_interface() */
-#endif /* NOT_YET */
-
 
 /*-------------------------------------------------------------------------
  * Function:       H5P__encode_size_t
@@ -737,7 +709,7 @@ H5P__decode(const void *buf)
     hid_t plist_id = -1;        /* ID of new property list */
     size_t value_buf_size = 0;  /* Size of current value buffer */
     uint8_t vers;               /* Version of encoded property list */
-    hid_t ret_value;            /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;  /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -793,10 +765,10 @@ H5P__decode(const void *buf)
                 HGOTO_ERROR(H5E_PLIST, H5E_CANTDECODE, FAIL, "property decoding routine failed, property: '%s'", name)
         } /* end if */
         else
-            HGOTO_ERROR(H5E_PLIST, H5E_NOTFOUND, FAIL, "no decode callback for property: '%s', name")
+            HGOTO_ERROR(H5E_PLIST, H5E_NOTFOUND, FAIL, "no decode callback for property: '%s'", name)
 
         /* Set the value for the property */
-        if(H5P_set(plist, name, value_buf) < 0)
+        if(H5P_poke(plist, name, value_buf) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to set value for property: '%s'", name)
     } /* end while */
 
diff --git a/src/H5Pfapl.c b/src/H5Pfapl.c
index 6b3d4ac..319dc77 100644
--- a/src/H5Pfapl.c
+++ b/src/H5Pfapl.c
@@ -27,7 +27,8 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -110,12 +111,16 @@
 #define H5F_ACS_GARBG_COLCT_REF_DEF             0
 #define H5F_ACS_GARBG_COLCT_REF_ENC             H5P__encode_unsigned
 #define H5F_ACS_GARBG_COLCT_REF_DEC             H5P__decode_unsigned
-/* Definition for file driver ID */
-#define H5F_ACS_FILE_DRV_ID_SIZE                sizeof(hid_t)
-#define H5F_ACS_FILE_DRV_ID_DEF                 H5_DEFAULT_VFD
-/* Definition for file driver info */
-#define H5F_ACS_FILE_DRV_INFO_SIZE              sizeof(void*)
-#define H5F_ACS_FILE_DRV_INFO_DEF               NULL
+/* Definition for file driver ID & info*/
+#define H5F_ACS_FILE_DRV_SIZE                   sizeof(H5FD_driver_prop_t)
+#define H5F_ACS_FILE_DRV_DEF                    {H5_DEFAULT_VFD, NULL}
+#define H5F_ACS_FILE_DRV_CRT                    H5P__facc_file_driver_create
+#define H5F_ACS_FILE_DRV_SET                    H5P__facc_file_driver_set
+#define H5F_ACS_FILE_DRV_GET                    H5P__facc_file_driver_get
+#define H5F_ACS_FILE_DRV_DEL                    H5P__facc_file_driver_del
+#define H5F_ACS_FILE_DRV_COPY                   H5P__facc_file_driver_copy
+#define H5F_ACS_FILE_DRV_CMP                    H5P__facc_file_driver_cmp
+#define H5F_ACS_FILE_DRV_CLOSE                  H5P__facc_file_driver_close
 /* Definition for file close degree */
 #define H5F_CLOSE_DEGREE_SIZE		        sizeof(H5F_close_degree_t)
 #define H5F_CLOSE_DEGREE_DEF		        H5F_CLOSE_DEFAULT
@@ -157,9 +162,12 @@
 /* Definition of pointer to initial file image info */
 #define H5F_ACS_FILE_IMAGE_INFO_SIZE            sizeof(H5FD_file_image_info_t)
 #define H5F_ACS_FILE_IMAGE_INFO_DEF             H5FD_DEFAULT_FILE_IMAGE_INFO
-#define H5F_ACS_FILE_IMAGE_INFO_DEL             H5P_file_image_info_del
-#define H5F_ACS_FILE_IMAGE_INFO_COPY            H5P_file_image_info_copy
-#define H5F_ACS_FILE_IMAGE_INFO_CLOSE           H5P_file_image_info_close
+#define H5F_ACS_FILE_IMAGE_INFO_SET             H5P__facc_file_image_info_set
+#define H5F_ACS_FILE_IMAGE_INFO_GET             H5P__facc_file_image_info_get
+#define H5F_ACS_FILE_IMAGE_INFO_DEL             H5P__facc_file_image_info_del
+#define H5F_ACS_FILE_IMAGE_INFO_COPY            H5P__facc_file_image_info_copy
+#define H5F_ACS_FILE_IMAGE_INFO_CMP             H5P__facc_file_image_info_cmp
+#define H5F_ACS_FILE_IMAGE_INFO_CLOSE           H5P__facc_file_image_info_close
 /* Definition of core VFD write tracking flag */
 #define H5F_ACS_CORE_WRITE_TRACKING_FLAG_SIZE   sizeof(hbool_t)
 #define H5F_ACS_CORE_WRITE_TRACKING_FLAG_DEF    FALSE
@@ -186,14 +194,26 @@
 /********************/
 
 /* Property class callbacks */
-static herr_t H5P_facc_reg_prop(H5P_genclass_t *pclass);
-static herr_t H5P_facc_create(hid_t fapl_id, void *copy_data);
-static herr_t H5P_facc_copy(hid_t new_plist_t, hid_t old_plist_t, void *copy_data);
+static herr_t H5P__facc_reg_prop(H5P_genclass_t *pclass);
+
+/* File driver ID & info property callbacks */
+static herr_t H5P__facc_file_driver_create(const char *name, size_t size, void *value);
+static herr_t H5P__facc_file_driver_set(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__facc_file_driver_get(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__facc_file_driver_del(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__facc_file_driver_copy(const char *name, size_t size, void *value);
+static int H5P__facc_file_driver_cmp(const void *value1, const void *value2, size_t size);
+static herr_t H5P__facc_file_driver_close(const char *name, size_t size, void *value);
 
 /* File image info property callbacks */
-static herr_t H5P_file_image_info_del(hid_t prop_id, const char *name, size_t size, void *value);
-static herr_t H5P_file_image_info_copy(const char *name, size_t size, void *value);
-static herr_t H5P_file_image_info_close(const char *name, size_t size, void *value);
+static herr_t H5P__file_image_info_copy(void *value);
+static herr_t H5P__file_image_info_free(void *value);
+static herr_t H5P__facc_file_image_info_set(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__facc_file_image_info_get(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__facc_file_image_info_del(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__facc_file_image_info_copy(const char *name, size_t size, void *value);
+static int H5P__facc_file_image_info_cmp(const void *value1, const void *value2, size_t size);
+static herr_t H5P__facc_file_image_info_close(const char *name, size_t size, void *value);
 
 /* encode & decode callbacks */
 static herr_t H5P__facc_cache_config_enc(const void *value, void **_pp, size_t *size);
@@ -218,13 +238,13 @@ const H5P_libclass_t H5P_CLS_FACC[1] = {{
     &H5P_CLS_FILE_ACCESS_g,	/* Pointer to class             */
     &H5P_CLS_FILE_ACCESS_ID_g,	/* Pointer to class ID          */
     &H5P_LST_FILE_ACCESS_ID_g,	/* Pointer to default property list ID */
-    H5P_facc_reg_prop,		/* Default property registration routine */
+    H5P__facc_reg_prop,		/* Default property registration routine */
 
-    H5P_facc_create,		/* Class creation callback      */
+    NULL,			/* Class creation callback      */
     NULL,		        /* Class creation callback info */
-    H5P_facc_copy,		/* Class copy callback          */
+    NULL,			/* Class copy callback          */
     NULL,		        /* Class copy callback info     */
-    H5P_facc_close,		/* Class close callback         */
+    NULL,			/* Class close callback         */
     NULL 		        /* Class close callback info    */
 }};
 
@@ -249,7 +269,6 @@ static const hsize_t H5F_def_meta_block_size_g = H5F_ACS_META_BLOCK_SIZE_DEF;
 static const size_t H5F_def_sieve_buf_size_g = H5F_ACS_SIEVE_BUF_SIZE_DEF;         /* Default raw data I/O sieve buffer size */
 static const hsize_t H5F_def_sdata_block_size_g = H5F_ACS_SDATA_BLOCK_SIZE_DEF;    /* Default small data allocation block size */
 static const unsigned H5F_def_gc_ref_g = H5F_ACS_GARBG_COLCT_REF_DEF;              /* Default garbage collection for references setting */
-static const void *H5F_def_driver_info_g = H5F_ACS_FILE_DRV_INFO_DEF;              /* Default VFL driver info */
 static const H5F_close_degree_t H5F_def_close_degree_g = H5F_CLOSE_DEGREE_DEF;     /* Default file close degree */
 static const hsize_t H5F_def_family_offset_g = H5F_ACS_FAMILY_OFFSET_DEF;          /* Default offset for family VFD */
 static const hsize_t H5F_def_family_newsize_g = H5F_ACS_FAMILY_NEWSIZE_DEF;        /* Default size of new files for family VFD */
@@ -262,9 +281,10 @@ static const H5FD_file_image_info_t H5F_def_file_image_info_g = H5F_ACS_FILE_IMA
 static const hbool_t H5F_def_core_write_tracking_flag_g = H5F_ACS_CORE_WRITE_TRACKING_FLAG_DEF;              /* Default setting for core VFD write tracking */
 static const size_t H5F_def_core_write_tracking_page_size_g = H5F_ACS_CORE_WRITE_TRACKING_PAGE_SIZE_DEF;     /* Default core VFD write tracking page size */
 
+
 
 /*-------------------------------------------------------------------------
- * Function:    H5P_facc_reg_prop
+ * Function:    H5P__facc_reg_prop
  *
  * Purpose:     Register the file access property list class's properties
  *
@@ -275,12 +295,12 @@ static const size_t H5F_def_core_write_tracking_page_size_g = H5F_ACS_CORE_WRITE
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P_facc_reg_prop(H5P_genclass_t *pclass)
+H5P__facc_reg_prop(H5P_genclass_t *pclass)
 {
-    const hid_t def_driver_id = H5F_ACS_FILE_DRV_ID_DEF;        /* Default VFL driver ID (initialized from a variable) */
+    const H5FD_driver_prop_t def_driver_prop = H5F_ACS_FILE_DRV_DEF;           /* Default VFL driver ID & info (initialized from a variable) */
     herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Register the initial metadata cache resize configuration */
     if(H5P_register_real(pclass, H5F_ACS_META_CACHE_INIT_CONFIG_NAME, H5F_ACS_META_CACHE_INIT_CONFIG_SIZE, &H5F_def_mdc_initCacheCfg_g, 
@@ -342,16 +362,11 @@ H5P_facc_reg_prop(H5P_genclass_t *pclass)
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
-    /* Register the file driver ID */
+    /* Register the file driver ID & info */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P_register_real(pclass, H5F_ACS_FILE_DRV_ID_NAME, H5F_ACS_FILE_DRV_ID_SIZE, &def_driver_id, 
-            NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
-
-    /* Register the file driver info */
-    /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P_register_real(pclass, H5F_ACS_FILE_DRV_INFO_NAME, H5F_ACS_FILE_DRV_INFO_SIZE, &H5F_def_driver_info_g, 
-            NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
+    if(H5P_register_real(pclass, H5F_ACS_FILE_DRV_NAME, H5F_ACS_FILE_DRV_SIZE, &def_driver_prop, 
+            H5F_ACS_FILE_DRV_CRT, H5F_ACS_FILE_DRV_SET, H5F_ACS_FILE_DRV_GET, NULL, NULL,
+            H5F_ACS_FILE_DRV_DEL, H5F_ACS_FILE_DRV_COPY, H5F_ACS_FILE_DRV_CMP, H5F_ACS_FILE_DRV_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the file close degree */
@@ -406,8 +421,8 @@ H5P_facc_reg_prop(H5P_genclass_t *pclass)
     /* Register the initial file image info */
     /* (Note: this property should not have an encode/decode callback -QAK) */
     if(H5P_register_real(pclass, H5F_ACS_FILE_IMAGE_INFO_NAME, H5F_ACS_FILE_IMAGE_INFO_SIZE, &H5F_def_file_image_info_g, 
-            NULL, NULL, NULL, NULL, NULL, 
-            H5F_ACS_FILE_IMAGE_INFO_DEL, H5F_ACS_FILE_IMAGE_INFO_COPY, NULL, H5F_ACS_FILE_IMAGE_INFO_CLOSE) < 0)
+            NULL, H5F_ACS_FILE_IMAGE_INFO_SET, H5F_ACS_FILE_IMAGE_INFO_GET, NULL, NULL,
+            H5F_ACS_FILE_IMAGE_INFO_DEL, H5F_ACS_FILE_IMAGE_INFO_COPY, H5F_ACS_FILE_IMAGE_INFO_CMP, H5F_ACS_FILE_IMAGE_INFO_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the core VFD backing store write tracking flag */
@@ -424,159 +439,7 @@ H5P_facc_reg_prop(H5P_genclass_t *pclass)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_facc_reg_prop() */
-
-
-/*----------------------------------------------------------------------------
- * Function:	H5P_facc_create
- *
- * Purpose:	Callback routine which is called whenever a file access
- *		property list is closed.  This routine performs any generic
- * 		initialization needed on the properties the library put into
- * 		the list.
- *
- * Return:	Success:		Non-negative
- * 		Failure:		Negative
- *
- * Programmer:	Raymond Lu
- *		Tuesday, Oct 23, 2001
- *
- *----------------------------------------------------------------------------
- */
-/* ARGSUSED */
-static herr_t
-H5P_facc_create(hid_t fapl_id, void H5_ATTR_UNUSED *copy_data)
-{
-    hid_t          driver_id;
-    H5P_genplist_t *plist;              /* Property list */
-    herr_t         ret_value = SUCCEED;
-
-    FUNC_ENTER_NOAPI_NOINIT
-
-    /* Check argument */
-    if(NULL == (plist = (H5P_genplist_t *)H5I_object(fapl_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a property list")
-
-    /* Retrieve driver ID property */
-    if(H5P_get(plist, H5F_ACS_FILE_DRV_ID_NAME, &driver_id) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get driver ID")
-
-    if(driver_id > 0) {
-        void *driver_info;
-
-        /* Retrieve driver info property */
-        if(H5P_get(plist, H5F_ACS_FILE_DRV_INFO_NAME, &driver_info) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get driver info")
-
-        /* Set the driver for the property list */
-        if(H5FD_fapl_open(plist, driver_id, driver_info) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set driver")
-    } /* end if */
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_facc_create() */
-
-
-/*--------------------------------------------------------------------------
- * Function:	H5P_facc_copy
- *
- * Purpose:	Callback routine which is called whenever a file access
- * 		property list is copied.  This routine performs any generic
- * 	 	copy needed on the properties.
- *
- * Return:	Success:	Non-negative
- * 		Failure:	Negative
- *
- * Programmer:	Raymond Lu
- *		Tuesday, Oct 23, 2001
- *
- *--------------------------------------------------------------------------
- */
-/* ARGSUSED */
-static herr_t
-H5P_facc_copy(hid_t dst_fapl_id, hid_t src_fapl_id, void H5_ATTR_UNUSED *copy_data)
-{
-    hid_t          driver_id;
-    H5P_genplist_t *src_plist;              /* Source property list */
-    herr_t         ret_value = SUCCEED;
-
-    FUNC_ENTER_NOAPI_NOINIT
-
-    /* Get driver ID from source property list */
-    if(NULL == (src_plist = (H5P_genplist_t *)H5I_object(src_fapl_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "can't get property list")
-    if(H5P_get(src_plist, H5F_ACS_FILE_DRV_ID_NAME, &driver_id) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get driver ID")
-
-    if(driver_id > 0) {
-        H5P_genplist_t *dst_plist;              /* Destination property list */
-        void *driver_info;
-
-        /* Get driver info from source property list */
-        if(H5P_get(src_plist, H5F_ACS_FILE_DRV_INFO_NAME, &driver_info) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get driver info")
-
-        /* Set the driver for the destination property list */
-        if(NULL == (dst_plist = (H5P_genplist_t *)H5I_object(dst_fapl_id)))
-            HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "can't get property list")
-        if(H5FD_fapl_open(dst_plist, driver_id, driver_info) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set driver")
-    } /* end if */
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_facc_copy() */
-
-
-/*--------------------------------------------------------------------------
- * Function:	H5P_facc_close
- *
- * Purpose:	Callback routine which is called whenever a file access
- *		property list is closed.  This routine performs any generic
- *		cleanup needed on the properties.
- *
- * Return:	Success:	Non-negative
- * 		Failure:	Negative
- *
- * Programmer:	Raymond Lu
- *		Tuesday, Oct 23, 2001
- *
- *---------------------------------------------------------------------------
- */
-/* ARGSUSED */
-herr_t
-H5P_facc_close(hid_t fapl_id, void H5_ATTR_UNUSED *close_data)
-{
-    hid_t      driver_id;
-    H5P_genplist_t *plist;              /* Property list */
-    herr_t     ret_value = SUCCEED;
-
-    FUNC_ENTER_NOAPI(FAIL)
-
-    /* Check argument */
-    if(NULL == (plist = (H5P_genplist_t *)H5I_object(fapl_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a property list")
-
-    /* Get driver ID property */
-    if(H5P_get(plist, H5F_ACS_FILE_DRV_ID_NAME, &driver_id) < 0)
-        HGOTO_DONE(FAIL) /* Can't return errors when library is shutting down */
-
-    if(driver_id > 0) {
-        void *driver_info;
-
-        /* Get driver info property */
-        if(H5P_get(plist, H5F_ACS_FILE_DRV_INFO_NAME, &driver_info) < 0)
-            HGOTO_DONE(FAIL) /* Can't return errors when library is shutting down */
-
-        /* Close the driver for the property list */
-        if(H5FD_fapl_close(driver_id, driver_info) < 0)
-            HGOTO_DONE(FAIL) /* Can't return errors when library is shutting down */
-    } /* end if */
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_facc_close() */
+} /* end H5P__facc_reg_prop() */
 
 
 /*-------------------------------------------------------------------------
@@ -700,9 +563,7 @@ done:
 herr_t
 H5P_set_driver(H5P_genplist_t *plist, hid_t new_driver_id, const void *new_driver_info)
 {
-    hid_t driver_id;            /* VFL driver ID */
-    void *driver_info;          /* VFL driver info */
-    herr_t ret_value = SUCCEED; /* Return value */
+    herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -710,19 +571,15 @@ H5P_set_driver(H5P_genplist_t *plist, hid_t new_driver_id, const void *new_drive
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file driver ID")
 
     if(TRUE == H5P_isa_class(plist->plist_id, H5P_FILE_ACCESS)) {
-        /* Get the current driver information */
-        if(H5P_get(plist, H5F_ACS_FILE_DRV_ID_NAME, &driver_id) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get driver ID")
-        if(H5P_get(plist, H5F_ACS_FILE_DRV_INFO_NAME, &driver_info) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET,FAIL,"can't get driver info")
+        H5FD_driver_prop_t driver_prop;         /* Property for driver ID & info */
 
-        /* Close the driver for the property list */
-        if(H5FD_fapl_close(driver_id, driver_info) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't reset driver")
+        /* Prepare the driver property */
+        driver_prop.driver_id = new_driver_id;
+        driver_prop.driver_info = new_driver_info;
 
-        /* Set the driver for the property list */
-        if(H5FD_fapl_open(plist, new_driver_id, new_driver_info) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set driver")
+        /* Set the driver ID & info property */
+        if(H5P_set(plist, H5F_ACS_FILE_DRV_NAME, &driver_prop) < 0)
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set driver ID & info")
     } /* end if */
     else
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list")
@@ -776,7 +633,7 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5P_get_driver
+ * Function:	H5P_peek_driver
  *
  * Purpose:	Return the ID of the low-level file driver.  PLIST_ID should
  *		be a file access property list.
@@ -794,7 +651,7 @@ done:
  *-------------------------------------------------------------------------
  */
 hid_t
-H5P_get_driver(H5P_genplist_t *plist)
+H5P_peek_driver(H5P_genplist_t *plist)
 {
     hid_t ret_value = FAIL;     /* Return value */
 
@@ -802,18 +659,21 @@ H5P_get_driver(H5P_genplist_t *plist)
 
     /* Get the current driver ID */
     if(TRUE == H5P_isa_class(plist->plist_id, H5P_FILE_ACCESS)) {
-        if(H5P_get(plist, H5F_ACS_FILE_DRV_ID_NAME, &ret_value) < 0)
+        H5FD_driver_prop_t driver_prop;         /* Property for driver ID & info */
+
+        if(H5P_peek(plist, H5F_ACS_FILE_DRV_NAME, &driver_prop) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get driver ID")
+        ret_value = driver_prop.driver_id;
     } /* end if */
     else
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list")
+        HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a file access property list")
 
     if(H5FD_VFD_DEFAULT == ret_value)
         ret_value = H5_DEFAULT_VFD;
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_get_driver() */
+} /* end H5P_peek_driver() */
 
 
 /*-------------------------------------------------------------------------
@@ -822,6 +682,8 @@ done:
  * Purpose:	Return the ID of the low-level file driver.  PLIST_ID should
  *		be a file access property list.
  *
+ * Note:	The ID returned should not be closed.
+ *
  * Return:	Success:	A low-level driver ID which is the same ID
  *				used when the driver was set for the property
  *				list. The driver ID is only valid as long as
@@ -847,7 +709,7 @@ H5Pget_driver(hid_t plist_id)
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a property list")
 
     /* Get the driver */
-    if((ret_value = H5P_get_driver(plist)) < 0)
+    if((ret_value = H5P_peek_driver(plist)) < 0)
          HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get driver")
 
 done:
@@ -856,7 +718,7 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5P_get_driver_info
+ * Function:	H5P_peek_driver_info
  *
  * Purpose:	Returns a pointer directly to the file driver-specific
  *		information of a file access.
@@ -874,8 +736,8 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-void *
-H5P_get_driver_info(H5P_genplist_t *plist)
+const void *
+H5P_peek_driver_info(H5P_genplist_t *plist)
 {
     void *ret_value = NULL;     /* Return value */
 
@@ -883,15 +745,18 @@ H5P_get_driver_info(H5P_genplist_t *plist)
 
     /* Get the current driver info */
     if(TRUE == H5P_isa_class(plist->plist_id, H5P_FILE_ACCESS)) {
-        if(H5P_get(plist, H5F_ACS_FILE_DRV_INFO_NAME, &ret_value) < 0)
+        H5FD_driver_prop_t driver_prop;         /* Property for driver ID & info */
+
+        if(H5P_peek(plist, H5F_ACS_FILE_DRV_NAME, &driver_prop) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get driver info")
+        ret_value = (void *)driver_prop.driver_info;
     } /* end if */
     else
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list")
+        HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, NULL, "not a file access property list")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_get_driver_info() */
+} /* end H5P_peek_driver_info() */
 
 
 /*-------------------------------------------------------------------------
@@ -926,7 +791,7 @@ H5Pget_driver_info(hid_t plist_id)
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a property list")
 
     /* Get the driver info */
-    if(NULL == (ret_value = H5P_get_driver_info(plist)))
+    if(NULL == (ret_value = (void *)H5P_peek_driver_info(plist)))
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get driver info")
 
 done:
@@ -935,6 +800,365 @@ done:
 
 
 /*-------------------------------------------------------------------------
+ * Function:    H5P__file_driver_copy
+ *
+ * Purpose:     Copy file driver ID & info.
+ *
+ * Note:        This is an "in-place" copy, since this routine gets called
+ *              after the top-level copy has been performed and this routine
+ *		finishes the "deep" part of the copy.
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Monday, Sept 8, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__file_driver_copy(void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    if(value) {
+        H5FD_driver_prop_t *info = (H5FD_driver_prop_t *)value; /* Driver ID & info struct */
+
+        /* Copy the driver & info, if there is one */
+        if(info->driver_id > 0) {
+            /* Increment the reference count on driver and copy driver info */
+            if(H5I_inc_ref(info->driver_id, FALSE) < 0)
+                HGOTO_ERROR(H5E_PLIST, H5E_CANTINC, FAIL, "unable to increment ref count on VFL driver")
+
+            /* Copy driver info, if it exists */
+            if(info->driver_info) {
+                H5FD_class_t *driver;       /* Pointer to driver */
+                void *new_pl;        /* Copy of driver info */
+
+                /* Retrieve the driver for the ID */
+                if(NULL == (driver = (H5FD_class_t *)H5I_object(info->driver_id)))
+                    HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a driver ID")
+
+                /* Allow the driver to copy or do it ourselves */
+                if(driver->fapl_copy) {
+                    if(NULL == (new_pl = (driver->fapl_copy)(info->driver_info)))
+                        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "driver info copy failed")
+                } /* end if */
+                else if(driver->fapl_size > 0) {
+                    if(NULL == (new_pl = H5MM_malloc(driver->fapl_size)))
+                        HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "driver info allocation failed")
+                    HDmemcpy(new_pl, info->driver_info, driver->fapl_size);
+                } /* end else-if */
+                else
+                    HGOTO_ERROR(H5E_PLIST, H5E_UNSUPPORTED, FAIL, "no way to copy driver info")
+
+                /* Set the driver info for the copy */
+                info->driver_info = new_pl;
+            } /* end if */
+        } /* end if */
+    } /* end if */
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__file_driver_copy() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__file_driver_free
+ *
+ * Purpose:     Free file driver ID & info.
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Monday, Sept 8, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__file_driver_free(void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    if(value) {
+        H5FD_driver_prop_t *info = (H5FD_driver_prop_t *)value; /* Driver ID & info struct */
+
+        /* Copy the driver & info, if there is one */
+        if(info->driver_id > 0) {
+            if(info->driver_info) {
+                H5FD_class_t *driver;       /* Pointer to driver */
+
+                /* Retrieve the driver for the ID */
+                if(NULL == (driver = (H5FD_class_t *)H5I_object(info->driver_id)))
+                    HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a driver ID")
+
+                /* Allow driver to free info or do it ourselves */
+                if(driver->fapl_free) {
+                    if((driver->fapl_free)((void *)info->driver_info) < 0)      /* Casting away const OK -QAK */
+                        HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "driver info free request failed")
+                } /* end if */
+                else
+                    H5MM_xfree((void *)info->driver_info);      /* Casting away const OK -QAK */
+            } /* end if */
+
+            /* Decrement reference count for driver */
+            if(H5I_dec_ref(info->driver_id) < 0)
+                HGOTO_ERROR(H5E_PLIST, H5E_CANTDEC, FAIL, "can't decrement reference count for driver ID")
+        } /* end if */
+    } /* end if */
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__file_driver_free() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_driver_create
+ *
+ * Purpose:     Create callback for the file driver ID & info property.
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Monday, September 8, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_driver_create(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Make copy of file driver */
+    if(H5P__file_driver_copy(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy file driver")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_driver_create() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_driver_set
+ *
+ * Purpose:     Copies a file driver property when it's set for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Monday, Sept 7, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_driver_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of file driver ID & info */
+    if(H5P__file_driver_copy(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy file driver")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_driver_set() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_driver_get
+ *
+ * Purpose:     Copies a file driver property when it's retrieved from a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Monday, Sept 7, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_driver_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of file driver */
+    if(H5P__file_driver_copy(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy file driver")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_driver_get() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_driver_del
+ *
+ * Purpose:     Frees memory used to store the driver ID & info property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Monday, September 8, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_driver_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Free the file driver ID & info */
+    if(H5P__file_driver_free(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRELEASE, FAIL, "can't release file driver")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_driver_del() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_driver_copy
+ *
+ * Purpose:     Copy callback for the file driver ID & info property.
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Monday, September 8, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_driver_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Make copy of file driver */
+    if(H5P__file_driver_copy(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy file driver")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_driver_copy() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:       H5P__facc_file_driver_cmp
+ *
+ * Purpose:        Callback routine which is called whenever the file driver ID & info
+ *                 property in the file access property list is compared.
+ *
+ * Return:         positive if VALUE1 is greater than VALUE2, negative if
+ *                      VALUE2 is greater than VALUE1 and zero if VALUE1 and
+ *                      VALUE2 are equal.
+ *
+ * Programmer:     Quincey Koziol
+ *                 Monday, September 8, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static int
+H5P__facc_file_driver_cmp(const void *_info1, const void *_info2,
+    size_t H5_ATTR_UNUSED size)
+{
+    const H5FD_driver_prop_t *info1 = (const H5FD_driver_prop_t *)_info1, /* Create local aliases for values */
+        *info2 = (const H5FD_driver_prop_t *)_info2;
+    H5FD_class_t *cls1, *cls2;  /* Driver class for each property */
+    int cmp_value;              /* Value from comparison */
+    herr_t ret_value = 0;       /* Return value */
+
+    FUNC_ENTER_STATIC_NOERR
+
+    /* Sanity check */
+    HDassert(info1);
+    HDassert(info2);
+    HDassert(size == sizeof(H5FD_driver_prop_t));
+
+    /* Compare drivers */
+    if(NULL == (cls1 = H5FD_get_class(info1->driver_id)))
+        HGOTO_DONE(-1)
+    if(NULL == (cls2 = H5FD_get_class(info2->driver_id)))
+        HGOTO_DONE(1)
+    if(cls1->name == NULL && cls2->name != NULL) HGOTO_DONE(-1);
+    if(cls1->name != NULL && cls2->name == NULL) HGOTO_DONE(1);
+    if(0 != (cmp_value = HDstrcmp(cls1->name, cls2->name)))
+        HGOTO_DONE(cmp_value);
+
+    /* Compare driver infos */
+    if(cls1->fapl_size < cls2->fapl_size) HGOTO_DONE(-1)
+    if(cls1->fapl_size > cls2->fapl_size) HGOTO_DONE(1)
+    HDassert(cls1->fapl_size == cls2->fapl_size);
+    if(info1->driver_info == NULL && info2->driver_info != NULL) HGOTO_DONE(-1);
+    if(info1->driver_info != NULL && info2->driver_info == NULL) HGOTO_DONE(1);
+    if(info1->driver_info) {
+        HDassert(cls1->fapl_size > 0);
+        if(0 != (cmp_value = HDmemcmp(info1->driver_info, info2->driver_info, cls1->fapl_size)))
+            HGOTO_DONE(cmp_value);
+    } /* end if */
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_driver_cmp() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_driver_close
+ *
+ * Purpose:     Close callback for the file driver ID & info property.
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Monday, September 8, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_driver_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Free the file driver */
+    if(H5P__file_driver_free(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRELEASE, FAIL, "can't release file driver")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_driver_close() */
+
+
+/*-------------------------------------------------------------------------
  * Function:    H5Pset_family_offset
  *
  * Purpose:     Set offset for family driver.  This file access property
@@ -2007,7 +2231,7 @@ H5Pset_file_image(hid_t fapl_id, void *buf_ptr, size_t buf_len)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
         
     /* Get old image info */
-    if(H5P_get(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &image_info) < 0)
+    if(H5P_peek(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &image_info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get old file image pointer")
         
     /* Release previous buffer, if it exists */
@@ -2048,7 +2272,7 @@ H5Pset_file_image(hid_t fapl_id, void *buf_ptr, size_t buf_len)
     image_info.size = buf_len;
 
     /* Set values */
-    if(H5P_set(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &image_info) < 0)
+    if(H5P_poke(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &image_info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set file image info")
 
 done:
@@ -2100,7 +2324,7 @@ H5Pget_file_image(hid_t fapl_id, void **buf_ptr_ptr, size_t *buf_len_ptr)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get values */
-    if(H5P_get(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &image_info) < 0)
+    if(H5P_peek(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &image_info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get file image info")
 
     /* verify file image field consistancy */
@@ -2176,7 +2400,7 @@ H5Pset_file_image_callbacks(hid_t fapl_id, H5FD_file_image_callbacks_t *callback
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get old info */
-    if(H5P_get(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &info) < 0)
+    if(H5P_peek(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get old file image info")
 
     /* verify file image field consistancy */
@@ -2214,7 +2438,7 @@ H5Pset_file_image_callbacks(hid_t fapl_id, H5FD_file_image_callbacks_t *callback
     } /* end if */
 
     /* Set values */
-    if(H5P_set(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &info) < 0)
+    if(H5P_poke(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set file image info")
 
 done:
@@ -2252,7 +2476,7 @@ H5Pget_file_image_callbacks(hid_t fapl_id, H5FD_file_image_callbacks_t *callback
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get old info */
-    if(H5P_get(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &info) < 0)
+    if(H5P_peek(fapl, H5F_ACS_FILE_IMAGE_INFO_NAME, &info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get file image info")
 
     /* verify file image field consistancy */
@@ -2279,80 +2503,30 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function: H5P_file_image_info_del
- *
- * Purpose:     Delete callback for the file image info property, called
- *              when the property is deleted from the plist. The buffer
- *              and udata may need to be freed, possibly using their 
- *              respective callbacks so the default free won't work.
- *
- * Return:      Non-negative on success/Negative on failure
- *
- * Programmer:  Jacob Gruber
- *              Thurday, August 11, 2011
- *
- *-------------------------------------------------------------------------
- */
-static herr_t
-H5P_file_image_info_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
-{
-    H5FD_file_image_info_t info;        /* Image info struct */
-    herr_t ret_value = SUCCEED;         /* Return value */
-
-    FUNC_ENTER_NOAPI_NOINIT
-
-    if(value) {
-        info = *(H5FD_file_image_info_t *)value;
-
-        /* verify file image field consistancy */
-        HDassert(((info.buffer != NULL) && (info.size > 0)) || 
-                 ((info.buffer == NULL) && (info.size == 0)));
-
-        if(info.buffer && info.size > 0) {
-            /* Free buffer */
-            if(info.callbacks.image_free) {
-                if(info.callbacks.image_free(info.buffer, H5FD_FILE_IMAGE_OP_PROPERTY_LIST_CLOSE, info.callbacks.udata) < 0)
-		    HGOTO_ERROR(H5E_RESOURCE, H5E_CANTFREE, FAIL, "image_free callback failed")
-            } /* end if */
-            else
-                HDfree(info.buffer);
-        } /* end if */
-
-        /* Free udata if it exists */
-        if(info.callbacks.udata) {
-            if(NULL == info.callbacks.udata_free)
-                HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "udata_free not defined")
-
-            if(info.callbacks.udata_free(info.callbacks.udata) < 0)
-	        HGOTO_ERROR(H5E_RESOURCE, H5E_CANTFREE, FAIL, "udata_free callback failed")
-        } /* end if */
-    } /* end if */
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_file_image_info_del() */
-
-
-/*-------------------------------------------------------------------------
- * Function: H5P_file_image_info_copy
+ * Function:    H5P__file_image_info_copy
  *
- * Purpose:     Copy callback for the file image info property. The buffer
+ * Purpose:     Copy file image info. The buffer
  *              and udata may need to be copied, possibly using their 
  *              respective callbacks so the default copy won't work.
  *
- * Return:      Non-negative on success/Negative on failure
+ * Note:        This is an "in-place" copy, since this routine gets called
+ *              after the top-level copy has been performed and this routine
+ *		finishes the "deep" part of the copy.
  *
- * Programmer:  Jacob Gruber
- *              Thurday, August 11, 2011
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
  *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P_file_image_info_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+H5P__file_image_info_copy(void *value)
 {
     herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     if(value) {
         H5FD_file_image_info_t *info;   /* Image info struct */
@@ -2373,19 +2547,18 @@ H5P_file_image_info_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED
             if(info->callbacks.image_malloc) {
                 if(NULL == (info->buffer = info->callbacks.image_malloc(info->size,
                         H5FD_FILE_IMAGE_OP_PROPERTY_LIST_COPY, info->callbacks.udata)))
-                    HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "image malloc callback failed")
+                    HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "image malloc callback failed")
             } /* end if */
             else {
                 if(NULL == (info->buffer = H5MM_malloc(info->size)))
-                    HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate memory block")
+                    HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "unable to allocate memory block")
             } /* end else */
             
             /* Copy data to new buffer */
             if(info->callbacks.image_memcpy) {
                 if(info->buffer != info->callbacks.image_memcpy(info->buffer, old_buffer, 
-			info->size, H5FD_FILE_IMAGE_OP_PROPERTY_LIST_COPY, 
-			info->callbacks.udata))
-		    HGOTO_ERROR(H5E_RESOURCE, H5E_CANTCOPY, FAIL, "image_memcpy callback failed")
+			info->size, H5FD_FILE_IMAGE_OP_PROPERTY_LIST_COPY, info->callbacks.udata))
+		    HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "image_memcpy callback failed")
             } /* end if */
 	    else
                 HDmemcpy(info->buffer, old_buffer, info->size);
@@ -2396,50 +2569,53 @@ H5P_file_image_info_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED
             void *old_udata = info->callbacks.udata;
 
             if(NULL == info->callbacks.udata_copy)
-                HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "udata_copy not defined")
+                HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "udata_copy not defined")
 
             info->callbacks.udata = info->callbacks.udata_copy(old_udata);
         } /* end if */
-
     } /* end if */
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_file_image_info_copy() */
+} /* end H5P__file_image_info_copy() */
 
 
 /*-------------------------------------------------------------------------
- * Function: H5P_file_image_info_close
+ * Function:    H5P__file_image_info_free
  *
- * Purpose:     Close callback for the file image info property. The buffer
- *              and udata may need to be freed, possibly using their 
- *              respective callbacks so the standard free won't work.
+ * Purpose:     Free file image info.  The buffer and udata may need to be
+ *		freed, possibly using their respective callbacks, so the
+ *		default free won't work.
  *
- * Return:      Non-negative on success/Negative on failure
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
  *
- * Programmer:  Jacob Gruber
- *              Thurday, August 11, 2011
+ * Programmer:  Quincey Koziol
+ *              Wednesday, Sept 2, 2015
  *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P_file_image_info_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+H5P__file_image_info_free(void *value)
 {
     herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     if(value) {
         H5FD_file_image_info_t *info;        /* Image info struct */
 
         info = (H5FD_file_image_info_t *)value;
              
+        /* Verify file image field consistancy */
+        HDassert(((info->buffer != NULL) && (info->size > 0)) || 
+                 ((info->buffer == NULL) && (info->size == 0)));
+
+        /* Free buffer */
         if(info->buffer != NULL && info->size > 0) { 
-            /* Free buffer */
             if(info->callbacks.image_free) {
-                if(info->callbacks.image_free(info->buffer, H5FD_FILE_IMAGE_OP_PROPERTY_LIST_CLOSE,
-                        info->callbacks.udata) < 0)
-		    HGOTO_ERROR(H5E_RESOURCE, H5E_CANTFREE, FAIL, "image_free callback failed")
+                if((*info->callbacks.image_free)(info->buffer, H5FD_FILE_IMAGE_OP_PROPERTY_LIST_CLOSE, info->callbacks.udata) < 0)
+		    HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "image_free callback failed")
             } /* end if */
             else
                 H5MM_xfree(info->buffer);
@@ -2448,15 +2624,231 @@ H5P_file_image_info_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED
         /* Free udata if it exists */
         if(info->callbacks.udata) {
             if(NULL == info->callbacks.udata_free)
-                HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "udata_free not defined")
-            if(info->callbacks.udata_free(info->callbacks.udata) < 0)
-                HGOTO_ERROR(H5E_RESOURCE, H5E_CANTFREE, FAIL, "udata_free callback failed")
+                HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "udata_free not defined")
+            if((*info->callbacks.udata_free)(info->callbacks.udata) < 0)
+                HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "udata_free callback failed")
         } /* end if */
     } /* end if */
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_file_image_info_close() */
+} /* end H5P__file_image_info_free() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_image_info_set
+ *
+ * Purpose:     Copies a file image property when it's set for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_image_info_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of file image info */
+    if(H5P__file_image_info_copy(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy file image info")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_image_info_set() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_image_info_get
+ *
+ * Purpose:     Copies a file image property when it's retrieved from a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_image_info_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of file image info */
+    if(H5P__file_image_info_copy(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy file image info")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_image_info_get() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_image_info_del
+ *
+ * Purpose:     Delete callback for the file image info property, called
+ *              when the property is deleted from the plist. The buffer
+ *              and udata may need to be freed, possibly using their 
+ *              respective callbacks so the default free won't work.
+ *
+ * Return:      Non-negative on success/Negative on failure
+ *
+ * Programmer:  Jacob Gruber
+ *              Thurday, August 11, 2011
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_image_info_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Free the file image info */
+    if(H5P__file_image_info_free(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRELEASE, FAIL, "can't release file image info")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_image_info_del() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_image_info_copy
+ *
+ * Purpose:     Copy callback for the file image info property. The buffer
+ *              and udata may need to be copied, possibly using their 
+ *              respective callbacks so the default copy won't work.
+ *
+ * Return:      Non-negative on success/Negative on failure
+ *
+ * Programmer:  Jacob Gruber
+ *              Thurday, August 11, 2011
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_image_info_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Make copy of file image info */
+    if(H5P__file_image_info_copy(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy file image info")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_image_info_copy() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:       H5P__facc_file_image_info_cmp
+ *
+ * Purpose:        Callback routine which is called whenever the file image info
+ *                 property in the file access property list is compared.
+ *
+ * Return:         positive if VALUE1 is greater than VALUE2, negative if
+ *                      VALUE2 is greater than VALUE1 and zero if VALUE1 and
+ *                      VALUE2 are equal.
+ *
+ * Programmer:     Quincey Koziol
+ *                 Thursday, September 3, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static int
+H5P__facc_file_image_info_cmp(const void *_info1, const void *_info2,
+    size_t H5_ATTR_UNUSED size)
+{
+    const H5FD_file_image_info_t *info1 = (const H5FD_file_image_info_t *)_info1, /* Create local aliases for values */
+        *info2 = (const H5FD_file_image_info_t *)_info2;
+    herr_t ret_value = 0;       /* Return value */
+
+    FUNC_ENTER_STATIC_NOERR
+
+    /* Sanity check */
+    HDassert(info1);
+    HDassert(info2);
+    HDassert(size == sizeof(H5FD_file_image_info_t));
+
+    /* Check for different buffer sizes */
+    if(info1->size < info2->size) HGOTO_DONE(-1)
+    if(info1->size > info2->size) HGOTO_DONE(1)
+
+    /* Check for different callbacks */
+    /* (Order in memory is fairly meaningless, so just check for equality) */
+    if(info1->callbacks.image_malloc != info2->callbacks.image_malloc) HGOTO_DONE(1)
+    if(info1->callbacks.image_memcpy != info2->callbacks.image_memcpy) HGOTO_DONE(-1)
+    if(info1->callbacks.image_realloc != info2->callbacks.image_realloc) HGOTO_DONE(1)
+    if(info1->callbacks.image_free != info2->callbacks.image_free) HGOTO_DONE(-1)
+    if(info1->callbacks.udata_copy != info2->callbacks.udata_copy) HGOTO_DONE(1)
+    if(info1->callbacks.udata_free != info2->callbacks.udata_free) HGOTO_DONE(-1)
+
+    /* Check for different udata */
+    /* (Don't know how big it is, so can't check contents) */
+    if(info1->callbacks.udata < info2->callbacks.udata) HGOTO_DONE(-1)
+    if(info1->callbacks.udata > info2->callbacks.udata) HGOTO_DONE(1)
+
+    /* Check buffer contents (instead of buffer pointers) */
+    if(info1->buffer != NULL && info2->buffer == NULL) HGOTO_DONE(-1)
+    if(info1->buffer == NULL && info2->buffer != NULL) HGOTO_DONE(1)
+    if(info1->buffer != NULL && info2->buffer != NULL)
+        ret_value = HDmemcmp(info1->buffer, info2->buffer, size);
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_image_info_cmp() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__facc_file_image_info_close
+ *
+ * Purpose:     Close callback for the file image info property. The buffer
+ *              and udata may need to be freed, possibly using their 
+ *              respective callbacks so the standard free won't work.
+ *
+ * Return:      Non-negative on success/Negative on failure
+ *
+ * Programmer:  Jacob Gruber
+ *              Thurday, August 11, 2011
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__facc_file_image_info_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Free the file image info */
+    if(H5P__file_image_info_free(value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRELEASE, FAIL, "can't release file image info")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__facc_file_image_info_close() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Pfcpl.c b/src/H5Pfcpl.c
index 5fc93fd..d451982 100644
--- a/src/H5Pfcpl.c
+++ b/src/H5Pfcpl.c
@@ -27,7 +27,8 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
diff --git a/src/H5Pfmpl.c b/src/H5Pfmpl.c
index 875f101..de9fa3b 100644
--- a/src/H5Pfmpl.c
+++ b/src/H5Pfmpl.c
@@ -27,7 +27,8 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
diff --git a/src/H5Pgcpl.c b/src/H5Pgcpl.c
index 1e3a278..f84fa7b 100644
--- a/src/H5Pgcpl.c
+++ b/src/H5Pgcpl.c
@@ -27,7 +27,9 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
+
 
 /***********/
 /* Headers */
diff --git a/src/H5Pint.c b/src/H5Pint.c
index e25b686..26431eb 100644
--- a/src/H5Pint.c
+++ b/src/H5Pint.c
@@ -22,10 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5P_init_interface
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -79,6 +76,22 @@ typedef struct {
     int cmp_value;              /* Value from property comparison */
 } H5P_plist_cmp_ud_t;
 
+/* Typedef for property list set/poke callbacks */
+typedef struct {
+    const void *value;          /* Pointer to value to set */
+} H5P_prop_set_ud_t;
+
+/* Typedef for property list get/peek callbacks */
+typedef struct {
+    void *value;                /* Pointer for retrieved value */
+} H5P_prop_get_ud_t;
+
+/* Typedef for H5P__do_prop() callbacks */
+typedef herr_t (*H5P_do_plist_op_t)(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void *udata);
+typedef herr_t (*H5P_do_pclass_op_t)(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void *udata);
+
 
 /********************/
 /* Local Prototypes */
@@ -88,6 +101,8 @@ typedef struct {
 static H5P_genprop_t *H5P_dup_prop(H5P_genprop_t *oprop, H5P_prop_within_t type);
 static herr_t H5P_free_prop(H5P_genprop_t *prop);
 static int H5P_cmp_prop(const H5P_genprop_t *prop1, const H5P_genprop_t *prop2);
+static herr_t H5P__do_prop(H5P_genplist_t *plist, const char *name, H5P_do_plist_op_t plist_op, 
+    H5P_do_pclass_op_t pclass_op, void *udata);
 
 
 /*********************/
@@ -96,7 +111,7 @@ static int H5P_cmp_prop(const H5P_genprop_t *prop1, const H5P_genprop_t *prop2);
 
 /*
  * Predefined property list classes. These are initialized at runtime by
- * H5P_init_interface() in this source file.
+ * H5P__init_package() in this source file.
  */
 hid_t H5P_CLS_ROOT_ID_g                         = FAIL;
 H5P_genclass_t *H5P_CLS_ROOT_g                  = NULL;
@@ -135,7 +150,7 @@ H5P_genclass_t *H5P_CLS_STRING_CREATE_g         = NULL;
 
 /*
  * Predefined property lists for each predefined class. These are initialized
- * at runtime by H5P_init_interface() in this source file.
+ * at runtime by H5P__init_package() in this source file.
  */
 hid_t H5P_LST_FILE_CREATE_ID_g          = FAIL;
 hid_t H5P_LST_FILE_ACCESS_ID_g          = FAIL;
@@ -312,89 +327,17 @@ static const H5I_class_t H5I_GENPROPLST_CLS[1] = {{
 
 
 
-/*--------------------------------------------------------------------------
- NAME
-    H5P_do_prop_cb1
- PURPOSE
-    Internal routine to call a property list callback routine and update
-    the property list accordingly.
- USAGE
-    herr_t H5P_do_prop_cb1(slist,prop,cb)
-        H5SL_t *slist;          IN/OUT: Skip list to hold changed properties
-        H5P_genprop_t *prop;    IN: Property to call callback for
-        H5P_prp_cb1_t *cb;      IN: Callback routine to call
- RETURNS
-    Returns non-negative on success, negative on failure.
- DESCRIPTION
-        Calls the callback routine passed in.  If the callback routine changes
-    the property value, then the property is duplicated and added to skip list.
-
- GLOBAL VARIABLES
- COMMENTS, BUGS, ASSUMPTIONS
- EXAMPLES
- REVISION LOG
---------------------------------------------------------------------------*/
-static herr_t
-H5P_do_prop_cb1(H5SL_t *slist, H5P_genprop_t *prop, H5P_prp_cb1_t cb)
-{
-    void *tmp_value=NULL;       /* Temporary value buffer */
-    H5P_genprop_t *pcopy=NULL;  /* Copy of property to insert into skip list */
-    herr_t ret_value=SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI_NOINIT
-
-    /* Allocate space for a temporary copy of the property value */
-    if(NULL == (tmp_value = H5MM_malloc(prop->size)))
-        HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for temporary property value")
-    HDmemcpy(tmp_value,prop->value,prop->size);
-
-    /* Call "type 1" callback ('create', 'copy' or 'close') */
-    if(cb(prop->name,prop->size,tmp_value) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL,"Property callback failed")
-
-    /* Check if the property value changed */
-    if((prop->cmp)(tmp_value,prop->value,prop->size)) {
-        /* Make a copy of the class's property */
-        if((pcopy=H5P_dup_prop(prop,H5P_PROP_WITHIN_LIST)) == NULL)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL,"Can't copy property")
-
-        /* Copy the changed value into the new property */
-        HDmemcpy(pcopy->value,tmp_value,prop->size);
-
-        /* Insert the changed property into the property list */
-        if(H5P_add_prop(slist,pcopy) < 0)
-            HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL,"Can't insert property into skip list")
-    } /* end if */
-
-done:
-    /* Release the temporary value buffer */
-    if(tmp_value!=NULL)
-        H5MM_xfree(tmp_value);
-
-    /* Cleanup on failure */
-    if(ret_value<0) {
-        if(pcopy!=NULL)
-            H5P_free_prop(pcopy);
-    } /* end if */
-
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_do_prop_cb1() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5P_init
  *
  * Purpose:	Initialize the interface from some other layer.
  *
  * Return:	Success:	non-negative
- *
  *		Failure:	negative
  *
  * Programmer:	Quincey Koziol
  *              Saturday, March 4, 2000
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 herr_t
@@ -412,22 +355,22 @@ done:
 
 /*--------------------------------------------------------------------------
 NAME
-   H5P_init_interface -- Initialize interface-specific information
+   H5P__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5P_init_interface()
+    herr_t H5P__init_package()
 RETURNS
     Non-negative on success/Negative on failure
 DESCRIPTION
     Initializes any interface-specific data or routines.
 --------------------------------------------------------------------------*/
-static herr_t
-H5P_init_interface(void)
+herr_t
+H5P__init_package(void)
 {
     size_t tot_init;                    /* Total # of classes initialized */
     size_t pass_init;                   /* # of classes initialized in each pass */
     herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_PACKAGE
 
     /*
      * Initialize the Generic Property class & object groups.
@@ -490,16 +433,16 @@ H5P_init_interface(void)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_init_interface() */
+} /* end H5P__init_package() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5P_term_interface
+    H5P_term_package
  PURPOSE
     Terminate various H5P objects
  USAGE
-    void H5P_term_interface()
+    void H5P_term_package()
  RETURNS
     Non-negative on success/Negative on failure
  DESCRIPTION
@@ -511,13 +454,13 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 int
-H5P_term_interface(void)
+H5P_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5_PKG_INIT_VAR) {
         int64_t	nlist, nclass;
 
         /* Destroy HDF5 library property classes & lists */
@@ -597,25 +540,89 @@ H5P_term_interface(void)
 
             n++; /*H5I*/
         } else {
-            /* Close public interface */
-            n += H5P__term_pub_interface();
-
-            /* Close deprecated interface */
-            n += H5P__term_deprec_interface();
-
             /* Destroy the property list and class id groups */
-            (void)H5I_dec_type_ref(H5I_GENPROP_LST);
-            n++; /*H5I*/
-            (void)H5I_dec_type_ref(H5I_GENPROP_CLS);
-            n++; /*H5I*/
+            n += (H5I_dec_type_ref(H5I_GENPROP_LST) > 0);
+            n += (H5I_dec_type_ref(H5I_GENPROP_CLS) > 0);
 
             /* Mark closed */
-            H5_interface_initialize_g = 0;
+            if(0 == n)
+                H5_PKG_INIT_VAR = FALSE;
         } /* end else */
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5P_term_interface() */
+} /* end H5P_term_package() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5P_do_prop_cb1
+ PURPOSE
+    Internal routine to call a property list callback routine and update
+    the property list accordingly.
+ USAGE
+    herr_t H5P_do_prop_cb1(slist,prop,cb)
+        H5SL_t *slist;          IN/OUT: Skip list to hold changed properties
+        H5P_genprop_t *prop;    IN: Property to call callback for
+        H5P_prp_cb1_t *cb;      IN: Callback routine to call
+ RETURNS
+    Returns non-negative on success, negative on failure.
+ DESCRIPTION
+        Calls the callback routine passed in.  If the callback routine changes
+    the property value, then the property is duplicated and added to skip list.
+
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+static herr_t
+H5P_do_prop_cb1(H5SL_t *slist, H5P_genprop_t *prop, H5P_prp_cb1_t cb)
+{
+    void *tmp_value = NULL;         /* Temporary value buffer */
+    H5P_genprop_t *pcopy = NULL;    /* Copy of property to insert into skip list */
+    herr_t ret_value = SUCCEED;     /* Return value */
+
+    FUNC_ENTER_NOAPI_NOINIT
+
+    /* Sanity check */
+    HDassert(slist);
+    HDassert(prop);
+    HDassert(prop->cmp);
+    HDassert(cb);
+
+    /* Allocate space for a temporary copy of the property value */
+    if(NULL == (tmp_value = H5MM_malloc(prop->size)))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "memory allocation failed for temporary property value")
+    HDmemcpy(tmp_value, prop->value, prop->size);
+
+    /* Call "type 1" callback ('create', 'copy' or 'close') */
+    if(cb(prop->name, prop->size, tmp_value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL,"Property callback failed")
+
+    /* Make a copy of the class's property */
+    if(NULL == (pcopy = H5P_dup_prop(prop, H5P_PROP_WITHIN_LIST)))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "Can't copy property")
+
+    /* Copy the changed value into the new property */
+    HDmemcpy(pcopy->value, tmp_value, prop->size);
+
+    /* Insert the changed property into the property list */
+    if(H5P_add_prop(slist, pcopy) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "Can't insert property into skip list")
+
+done:
+    /* Release the temporary value buffer */
+    if(tmp_value)
+        H5MM_xfree(tmp_value);
+
+    /* Cleanup on failure */
+    if(ret_value < 0)
+        if(pcopy)
+            H5P_free_prop(pcopy);
+
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P_do_prop_cb1() */
 
 
 /*--------------------------------------------------------------------------
@@ -838,7 +845,7 @@ H5P_copy_plist(const H5P_genplist_t *old_plist, hbool_t app_ref)
 
                 /* Only "copy" properties we haven't seen before */
                 if(nseen==0 || H5SL_search(seen,tmp->name) == NULL) {
-                    /* Call property creation callback, if it exists */
+                    /* Call property copy callback, if it exists */
                     if(tmp->copy) {
                         /* Call the callback & insert changed value into skip list (if necessary) */
                         if(H5P_do_prop_cb1(new_plist->props,tmp,tmp->copy) < 0)
@@ -934,7 +941,7 @@ static H5P_genprop_t *
 H5P_dup_prop(H5P_genprop_t *oprop, H5P_prop_within_t type)
 {
     H5P_genprop_t *prop = NULL;      /* Pointer to new property copied */
-    H5P_genprop_t *ret_value;        /* Return value */
+    H5P_genprop_t *ret_value = NULL; /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1050,8 +1057,8 @@ H5P_create_prop(const char *name, size_t size, H5P_prop_within_t type,
     H5P_prp_copy_func_t prp_copy, H5P_prp_compare_func_t prp_cmp,
     H5P_prp_close_func_t prp_close)
 {
-    H5P_genprop_t *prop = NULL;        /* Pointer to new property copied */
-    H5P_genprop_t *ret_value;        /* Return value */
+    H5P_genprop_t *prop = NULL;      /* Pointer to new property copied */
+    H5P_genprop_t *ret_value = NULL; /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1171,7 +1178,7 @@ done:
 H5P_genprop_t *
 H5P__find_prop_plist(const H5P_genplist_t *plist, const char *name)
 {
-    H5P_genprop_t *ret_value;   /* Property pointer return value */
+    H5P_genprop_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -1231,7 +1238,7 @@ done:
 static H5P_genprop_t *
 H5P_find_prop_pclass(H5P_genclass_t *pclass, const char *name)
 {
-    H5P_genprop_t *ret_value;   /* Property pointer return value */
+    H5P_genprop_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1541,8 +1548,8 @@ H5P_create_class(H5P_genclass_t *par_class, const char *name, H5P_plist_type_t t
     H5P_cls_copy_func_t cls_copy, void *copy_data,
     H5P_cls_close_func_t cls_close, void *close_data)
 {
-    H5P_genclass_t *pclass=NULL;   /* Property list class created */
-    H5P_genclass_t *ret_value;     /* return value */
+    H5P_genclass_t *pclass = NULL;      /* Property list class created */
+    H5P_genclass_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1636,10 +1643,10 @@ static H5P_genplist_t *
 H5P_create(H5P_genclass_t *pclass)
 {
     H5P_genclass_t *tclass;         /* Temporary class pointer */
-    H5P_genplist_t *plist=NULL;     /* New property list created */
+    H5P_genplist_t *plist = NULL;   /* New property list created */
     H5P_genprop_t *tmp;             /* Temporary pointer to parent class properties */
-    H5SL_t *seen=NULL;              /* Skip list to hold names of properties already seen */
-    H5P_genplist_t *ret_value;      /* Return value */
+    H5SL_t *seen = NULL;            /* Skip list to hold names of properties already seen */
+    H5P_genplist_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1775,10 +1782,10 @@ done:
 hid_t
 H5P_create_id(H5P_genclass_t *pclass, hbool_t app_ref)
 {
-    H5P_genclass_t *tclass;         /* Temporary class pointer */
-    H5P_genplist_t *plist = NULL;   /* Property list created */
-    hid_t plist_id = FAIL;      /* Property list ID */
-    hid_t ret_value;            /* return value */
+    H5P_genclass_t *tclass;             /* Temporary class pointer */
+    H5P_genplist_t *plist = NULL;       /* Property list created */
+    hid_t plist_id = FAIL;              /* Property list ID */
+    hid_t ret_value = H5I_INVALID_HID;  /* return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -2561,162 +2568,449 @@ done:
 
 /*--------------------------------------------------------------------------
  NAME
-    H5P_set
+    H5P__do_prop
  PURPOSE
-    Internal routine to set a property's value in a property list.
+    Internal routine to perform an operation on a property in a property list
  USAGE
-    herr_t H5P_set(plist, name, value)
+    herr_t H5P__do_prop(plist, name, cb, udata)
         H5P_genplist_t *plist;  IN: Property list to find property in
         const char *name;       IN: Name of property to set
-        void *value;            IN: Pointer to the value for the property
+        H5P_do_plist_op_t plist_op;  IN: Pointer to the callback to invoke when the
+                                    property is found in the property list
+        H5P_do_pclass_op_t pclass_op; IN: Pointer to the callback to invoke when the
+                                    property is found in the property class
+        void *udata;            IN: Pointer to the user data for the callback
  RETURNS
     Returns non-negative on success, negative on failure.
  DESCRIPTION
-        Sets a new value for a property in a property list.  The property name
-    must exist or this routine will fail.  If there is a 'set' callback routine
-    registered for this property, the 'value' will be passed to that routine and
-    any changes to the 'value' will be used when setting the property value.
-    The information pointed at by the 'value' pointer (possibly modified by the
-    'set' callback) is copied into the property list value and may be changed
-    by the application making the H5Pset call without affecting the property
-    value.
-
-        If the 'set' callback routine returns an error, the property value will
-    not be modified.  This routine may not be called for zero-sized properties
-    and will return an error in that case.
-
+        Finds a property in a property list and calls the callback with it.
  GLOBAL VARIABLES
  COMMENTS, BUGS, ASSUMPTIONS
  EXAMPLES
  REVISION LOG
 --------------------------------------------------------------------------*/
-herr_t
-H5P_set(H5P_genplist_t *plist, const char *name, const void *value)
+static herr_t
+H5P__do_prop(H5P_genplist_t *plist, const char *name, H5P_do_plist_op_t plist_op, 
+    H5P_do_pclass_op_t pclass_op, void *udata)
 {
     H5P_genclass_t *tclass;     /* Temporary class pointer */
     H5P_genprop_t *prop;        /* Temporary property pointer */
-    herr_t      ret_value=SUCCEED;       /* Return value */
+    herr_t ret_value = SUCCEED; /* Return value */
 
-    FUNC_ENTER_NOAPI(FAIL)
+    FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(plist);
     HDassert(name);
-    HDassert(value);
+    HDassert(plist_op);
+    HDassert(pclass_op);
 
     /* Check if the property has been deleted */
-    if(H5SL_search(plist->del,name)!=NULL)
+    if(NULL != H5SL_search(plist->del, name))
         HGOTO_ERROR(H5E_PLIST, H5E_NOTFOUND, FAIL, "property doesn't exist")
 
     /* Find property in changed list */
     if(NULL != (prop = (H5P_genprop_t *)H5SL_search(plist->props, name))) {
-        /* Check for property size >0 */
-        if(prop->size==0)
-            HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "property has zero size")
-
-        /* Make a copy of the value and pass to 'set' callback */
-        if(prop->set!=NULL) {
-            void *tmp_value;            /* Temporary value for property */
-
-            /* Make a copy of the current value, in case the callback fails */
-            if(NULL==(tmp_value=H5MM_malloc(prop->size)))
-                HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed temporary property value")
-            HDmemcpy(tmp_value,value,prop->size);
-
-            /* Call user's callback */
-            if((*(prop->set))(plist->plist_id,name,prop->size,tmp_value) < 0) {
-                H5MM_xfree(tmp_value);
-                HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't set property value")
-            } /* end if */
-
-            /* Copy new [possibly unchanged] value into property value */
-            HDmemcpy(prop->value,tmp_value,prop->size);
-
-            /* Free the temporary value buffer */
-            H5MM_xfree(tmp_value);
-        } /* end if */
-        /* No 'set' callback, just copy value */
-        else
-            HDmemcpy(prop->value,value,prop->size);
+        /* Call the 'found in propery list' callback */
+        if((*plist_op)(plist, name, prop, udata) < 0)
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTOPERATE, FAIL, "can't operate on property")
     } /* end if */
     else {
         /*
          * Check if we should set class properties (up through list of parent classes also),
          * & make property 'set' callback.
          */
-        tclass=plist->pclass;
-        while(tclass!=NULL) {
-            if(tclass->nprops>0) {
+        tclass = plist->pclass;
+        while(NULL != tclass) {
+            if(tclass->nprops > 0) {
                 /* Find the property in the class */
-                if((prop = (H5P_genprop_t *)H5SL_search(tclass->props,name))!=NULL) {
-                    H5P_genprop_t *pcopy;  /* Copy of property to insert into skip list */
-
-                    /* Check for property size >0 */
-                    if(prop->size==0)
-                        HGOTO_ERROR(H5E_PLIST,H5E_BADVALUE,FAIL,"property has zero size")
-
-                    /* Make a copy of the value and pass to 'set' callback */
-                    if(prop->set!=NULL) {
-                        void *tmp_value;            /* Temporary value for property */
-
-                        /* Make a copy of the current value, in case the callback fails */
-                        if(NULL==(tmp_value=H5MM_malloc(prop->size)))
-                            HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed temporary property value")
-                        HDmemcpy(tmp_value,value,prop->size);
-
-                        /* Call user's callback */
-                        if((*(prop->set))(plist->plist_id,name,prop->size,tmp_value) < 0) {
-                            H5MM_xfree(tmp_value);
-                            HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't set property value")
-                        } /* end if */
-
-                        if((prop->cmp)(tmp_value,prop->value,prop->size)) {
-                            /* Make a copy of the class's property */
-                            if((pcopy=H5P_dup_prop(prop,H5P_PROP_WITHIN_LIST)) == NULL)
-                                HGOTO_ERROR(H5E_PLIST,H5E_CANTCOPY,FAIL,"Can't copy property")
-
-                            /* Copy new value into property value */
-                            HDmemcpy(pcopy->value,tmp_value,pcopy->size);
-
-                            /* Insert the changed property into the property list */
-                            if(H5P_add_prop(plist->props,pcopy) < 0)
-                                HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL,"Can't insert changed property into skip list")
-                        } /* end if */
-
-                        /* Free the temporary value buffer */
-                        H5MM_xfree(tmp_value);
-                    } /* end if */
-                    /* No 'set' callback, just copy value */
-                    else {
-                        if((prop->cmp)(value,prop->value,prop->size)) {
-                            /* Make a copy of the class's property */
-                            if((pcopy=H5P_dup_prop(prop,H5P_PROP_WITHIN_LIST)) == NULL)
-                                HGOTO_ERROR(H5E_PLIST,H5E_CANTCOPY,FAIL,"Can't copy property")
-
-                            HDmemcpy(pcopy->value,value,pcopy->size);
-
-                            /* Insert the changed property into the property list */
-                            if(H5P_add_prop(plist->props,pcopy) < 0)
-                                HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL,"Can't insert changed property into skip list")
-                        } /* end if */
-                    } /* end else */
+                if(NULL != (prop = (H5P_genprop_t *)H5SL_search(tclass->props, name))) {
+                    /* Call the 'found in class' callback */
+                    if((*pclass_op)(plist, name, prop, udata) < 0)
+                        HGOTO_ERROR(H5E_PLIST, H5E_CANTOPERATE, FAIL, "can't operate on property")
 
                     /* Leave */
-                    HGOTO_DONE(SUCCEED);
-                } /* end while */
+                    break;
+                } /* end if */
             } /* end if */
 
             /* Go up to parent class */
-            tclass=tclass->parent;
+            tclass = tclass->parent;
         } /* end while */
 
         /* If we get this far, then it wasn't in the list of changed properties,
          * nor in the properties in the class hierarchy, indicate an error
          */
-        HGOTO_ERROR(H5E_PLIST,H5E_NOTFOUND,FAIL,"can't find property in skip list")
+        if(NULL == tclass)
+            HGOTO_ERROR(H5E_PLIST, H5E_NOTFOUND, FAIL, "can't find property in skip list")
     } /* end else */
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
+}   /* H5P__do_prop() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5P__poke_plist_cb
+ PURPOSE
+    Internal callback for H5P__do_prop, to overwrite a property's value in a property list.
+ USAGE
+    herr_t H5P__poke_plist_cb(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to overwrite property in
+        const char *name;       IN: Name of property to overwrite
+        H5P_genprop_t *prop;    IN: Property to overwrite
+        void *udata;            IN: User data for operation
+ RETURNS
+    Returns non-negative on success, negative on failure.
+ DESCRIPTION
+    Overwrite a value for a property in a property list.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+    Called when the property is found in the property list.
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+static herr_t
+H5P__poke_plist_cb(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void *_udata)
+{
+    H5P_prop_set_ud_t *udata = (H5P_prop_set_ud_t *)_udata;    /* User data for callback */
+    herr_t ret_value = SUCCEED; /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(plist);
+    HDassert(name);
+    HDassert(prop);
+
+    /* Check for property size >0 */
+    if(0 == prop->size)
+        HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "property has zero size")
+
+    /* Overwrite value in property */
+    HDmemcpy(prop->value, udata->value, prop->size);
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+}   /* H5P__poke_plist_cb() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5P__poke_pclass_cb
+ PURPOSE
+    Internal callback for H5P__do_prop, to overwrite a property's value in a property list.
+ USAGE
+    herr_t H5P__poke_pclass_cb(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to overwrite property in
+        const char *name;       IN: Name of property to overwrite
+        H5P_genprop_t *prop;    IN: Property to overwrite
+        void *udata;            IN: User data for operation
+ RETURNS
+    Returns non-negative on success, negative on failure.
+ DESCRIPTION
+    Overwrite a value for a property in a property list.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+    Called when the property is found in the property class.
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+static herr_t
+H5P__poke_pclass_cb(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void *_udata)
+{
+    H5P_prop_set_ud_t *udata = (H5P_prop_set_ud_t *)_udata;    /* User data for callback */
+    H5P_genprop_t *pcopy = NULL;        /* Copy of property to insert into skip list */
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(plist);
+    HDassert(name);
+    HDassert(prop);
+    HDassert(prop->cmp);
+
+    /* Check for property size >0 */
+    if(0 == prop->size)
+        HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "property has zero size")
+
+    /* Make a copy of the class's property */
+    if(NULL == (pcopy = H5P_dup_prop(prop, H5P_PROP_WITHIN_LIST)))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "Can't copy property")
+
+    HDmemcpy(pcopy->value, udata->value, pcopy->size);
+
+    /* Insert the changed property into the property list */
+    if(H5P_add_prop(plist->props, pcopy) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL,"Can't insert changed property into skip list")
+
+done:
+    /* Cleanup on failure */
+    if(ret_value < 0)
+        if(pcopy)
+            H5P_free_prop(pcopy);
+
+    FUNC_LEAVE_NOAPI(ret_value)
+}   /* H5P__poke_pclass_cb() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5P_poke
+ PURPOSE
+    Internal routine to overwrite a property's value in a property list.
+ USAGE
+    herr_t H5P_poke(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to find property in
+        const char *name;       IN: Name of property to overwrite
+        void *value;            IN: Pointer to the value for the property
+ RETURNS
+    Returns non-negative on success, negative on failure.
+ DESCRIPTION
+        Overwrites a property in a property list (i.e. a "shallow" copy over
+    the property value).  The property name must exist or this routine will
+    fail.  If there is a setget' callback routine registered for this property,
+    it is _NOT_ called.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+        This routine may not be called for zero-sized properties and will
+    return an error in that case.
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+herr_t
+H5P_poke(H5P_genplist_t *plist, const char *name, const void *value)
+{
+    H5P_prop_set_ud_t udata;    /* User data for callback */
+    herr_t ret_value = SUCCEED; /* Return value */
+
+    FUNC_ENTER_NOAPI(FAIL)
+
+    /* Sanity check */
+    HDassert(plist);
+    HDassert(name);
+    HDassert(value);
+
+    /* Find the property and set the value */
+    udata.value = value;
+    if(H5P__do_prop(plist, name, H5P__poke_plist_cb, H5P__poke_pclass_cb, &udata) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTOPERATE, FAIL, "can't operate on plist to overwrite value")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+}   /* H5P_poke() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5P__set_plist_cb
+ PURPOSE
+    Internal callback for H5P__do_prop, to set a property's value in a property list.
+ USAGE
+    herr_t H5P__set_plist_cb(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to set property in
+        const char *name;       IN: Name of property to set
+        H5P_genprop_t *prop;    IN: Property to set
+        void *udata;            IN: User data for operation
+ RETURNS
+    Returns non-negative on success, negative on failure.
+ DESCRIPTION
+    Sets a new value for a property in a property list.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+    Called when the property is found in the property list.
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+static herr_t
+H5P__set_plist_cb(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void *_udata)
+{
+    H5P_prop_set_ud_t *udata = (H5P_prop_set_ud_t *)_udata;    /* User data for callback */
+    void *tmp_value = NULL;     /* Temporary value for property */
+    herr_t ret_value = SUCCEED; /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(plist);
+    HDassert(name);
+    HDassert(prop);
+
+    /* Check for property size >0 */
+    if(0 == prop->size)
+        HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "property has zero size")
+
+    /* Make a copy of the value and pass to 'set' callback */
+    if(NULL != prop->set) {
+        /* Make a copy of the current value, in case the callback fails */
+        if(NULL == (tmp_value = H5MM_malloc(prop->size)))
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "memory allocation failed temporary property value")
+        HDmemcpy(tmp_value, udata->value, prop->size);
+
+        /* Call user's callback */
+        if((*(prop->set))(plist->plist_id, name, prop->size, tmp_value) < 0)
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't set property value")
+    } /* end if */
+    /* No 'set' callback, just copy value */
+    else
+        tmp_value = (void *)udata->value;       /* Casting away const OK -QAK */
+
+    /* Free any previous value for the property */
+    if(NULL != prop->del) {
+        /* Call user's 'delete' callback */
+        if((*(prop->del))(plist->plist_id, name, prop->size, prop->value) < 0)
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "can't release property value")
+    } /* end if */
+
+    /* Copy new [possibly unchanged] value into property value */
+    HDmemcpy(prop->value, tmp_value, prop->size);
+
+done:
+    /* Free the temporary value buffer */
+    if(tmp_value != NULL && tmp_value != udata->value)
+        H5MM_xfree(tmp_value);
+
+    FUNC_LEAVE_NOAPI(ret_value)
+}   /* H5P__set_plist_cb() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5P__set_pclass_cb
+ PURPOSE
+    Internal callback for H5P__do_prop, to set a property's value in a property list.
+ USAGE
+    herr_t H5P__set_pclass_cb(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to set property in
+        const char *name;       IN: Name of property to set
+        H5P_genprop_t *prop;    IN: Property to set
+        void *udata;            IN: User data for operation
+ RETURNS
+    Returns non-negative on success, negative on failure.
+ DESCRIPTION
+    Sets a new value for a property in a property list.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+    Called when the property is found in the property class.
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+static herr_t
+H5P__set_pclass_cb(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void *_udata)
+{
+    H5P_prop_set_ud_t *udata = (H5P_prop_set_ud_t *)_udata;    /* User data for callback */
+    H5P_genprop_t *pcopy = NULL;        /* Copy of property to insert into skip list */
+    void *tmp_value = NULL;             /* Temporary value for property */
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(plist);
+    HDassert(name);
+    HDassert(prop);
+    HDassert(prop->cmp);
+
+    /* Check for property size >0 */
+    if(0 == prop->size)
+        HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "property has zero size")
+
+    /* Make a copy of the value and pass to 'set' callback */
+    if(NULL != prop->set) {
+        /* Make a copy of the current value, in case the callback fails */
+        if(NULL == (tmp_value = H5MM_malloc(prop->size)))
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "memory allocation failed temporary property value")
+        HDmemcpy(tmp_value, udata->value, prop->size);
+
+        /* Call user's callback */
+        if((*(prop->set))(plist->plist_id, name, prop->size, tmp_value) < 0)
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't set property value")
+    } /* end if */
+    /* No 'set' callback, just copy value */
+    else
+        tmp_value = (void *)udata->value;       /* Casting away const OK -QAK */
+
+    /* Make a copy of the class's property */
+    if(NULL == (pcopy = H5P_dup_prop(prop, H5P_PROP_WITHIN_LIST)))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "Can't copy property")
+
+    HDmemcpy(pcopy->value, tmp_value, pcopy->size);
+
+    /* Insert the changed property into the property list */
+    if(H5P_add_prop(plist->props, pcopy) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL,"Can't insert changed property into skip list")
+
+done:
+    /* Free the temporary value buffer */
+    if(tmp_value != NULL && tmp_value != udata->value)
+        H5MM_xfree(tmp_value);
+
+    /* Cleanup on failure */
+    if(ret_value < 0)
+        if(pcopy)
+            H5P_free_prop(pcopy);
+
+    FUNC_LEAVE_NOAPI(ret_value)
+}   /* H5P__set_pclass_cb() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5P_set
+ PURPOSE
+    Internal routine to set a property's value in a property list.
+ USAGE
+    herr_t H5P_set(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to find property in
+        const char *name;       IN: Name of property to set
+        void *value;            IN: Pointer to the value for the property
+ RETURNS
+    Returns non-negative on success, negative on failure.
+ DESCRIPTION
+        Sets a new value for a property in a property list.  The property name
+    must exist or this routine will fail.  If there is a 'set' callback routine
+    registered for this property, the 'value' will be passed to that routine and
+    any changes to the 'value' will be used when setting the property value.
+    The information pointed at by the 'value' pointer (possibly modified by the
+    'set' callback) is copied into the property list value and may be changed
+    by the application making the H5Pset call without affecting the property
+    value.
+
+        If the 'set' callback routine returns an error, the property value will
+    not be modified.  This routine may not be called for zero-sized properties
+    and will return an error in that case.
+
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+herr_t
+H5P_set(H5P_genplist_t *plist, const char *name, const void *value)
+{
+    H5P_prop_set_ud_t udata;    /* User data for callback */
+    herr_t ret_value = SUCCEED; /* Return value */
+
+    FUNC_ENTER_NOAPI(FAIL)
+
+    /* Sanity check */
+    HDassert(plist);
+    HDassert(name);
+    HDassert(value);
+
+    /* Find the property and set the value */
+    udata.value = value;
+    if(H5P__do_prop(plist, name, H5P__set_plist_cb, H5P__set_pclass_cb, &udata) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTOPERATE, FAIL, "can't operate on plist to set value")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
 }   /* H5P_set() */
 
 
@@ -3383,7 +3677,7 @@ done:
 htri_t
 H5P_class_isa(const H5P_genclass_t *pclass1, const H5P_genclass_t *pclass2)
 {
-    htri_t ret_value;
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -3436,7 +3730,7 @@ H5P_isa_class(hid_t plist_id, hid_t pclass_id)
 {
     H5P_genplist_t	*plist;         /* Property list to query */
     H5P_genclass_t	*pclass;        /* Property list class */
-    htri_t ret_value;                   /* return value */
+    htri_t ret_value = FAIL;            /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -3486,7 +3780,7 @@ done:
 H5P_genplist_t *
 H5P_object_verify(hid_t plist_id, hid_t pclass_id)
 {
-    H5P_genplist_t *ret_value;                   /* return value */
+    H5P_genplist_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -3856,330 +4150,359 @@ done:
 
 /*--------------------------------------------------------------------------
  NAME
-    H5P_peek_unsigned
+    H5P__peek_cb
  PURPOSE
-    Internal routine to quickly retrieve the value of a property in a property list.
+    Internal callback for H5P__do_prop, to peek at a property's value in a property list.
  USAGE
-    int H5P_peek_unsigned(plist, name)
-        H5P_genplist_t *plist;  IN: Property list to check
-        const char *name;       IN: Name of property to query
+    herr_t H5P__peek_plist_cb(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to peek property in
+        const char *name;       IN: Name of property to peek
+        H5P_genprop_t *prop;    IN: Property to peek
+        void *udata;            IN: User data for operation
  RETURNS
-    Directly returns the value of the property in the list
+    Returns non-negative on success, negative on failure.
  DESCRIPTION
-        This function directly returns the value of a property in a property
-    list.  Because this function is only able to just copy a particular property
-    value to the return value, there is no way to check for errors.  We attempt
-    to make certain that bad things don't happen by validating that the size of
-    the property is the same as the size of the return type, but that can't
-    catch all errors.
-        This function does call the user's 'get' callback routine still.
-
+        Peeks at a new value for a property in a property list.
  GLOBAL VARIABLES
  COMMENTS, BUGS, ASSUMPTIONS
-    No error checking!
-    Use with caution!
+    Called when the property is found in the property list and when it's found
+        for the property class.
  EXAMPLES
  REVISION LOG
 --------------------------------------------------------------------------*/
-unsigned
-H5P_peek_unsigned(H5P_genplist_t *plist, const char *name)
+static herr_t
+H5P__peek_cb(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void *_udata)
 {
-    unsigned ret_value;            /* return value */
+    H5P_prop_get_ud_t *udata = (H5P_prop_get_ud_t *)_udata;    /* User data for callback */
+    herr_t ret_value = SUCCEED; /* Return value */
 
-    FUNC_ENTER_NOAPI(UFAIL)
+    FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(plist);
     HDassert(name);
+    HDassert(prop);
 
-    /* Get the value to return, don't worry about the return value, we can't return it */
-    H5P_get(plist,name,&ret_value);
+    /* Check for property size >0 */
+    if(0 == prop->size)
+        HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "property has zero size")
+
+    /* Make a (shallow) copy of the value */
+    HDmemcpy(udata->value, prop->value, prop->size);
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}   /* H5P_peek_unsigned() */
+}   /* H5P__peek_cb() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5P_peek_hid_t
+    H5P_peek
  PURPOSE
-    Internal routine to quickly retrieve the value of a property in a property list.
+    Internal routine to look at the value of a property in a property list.
  USAGE
-    hid_t H5P_peek_hid_t(plist, name)
+    herr_t H5P_peek(plist, name, value)
         H5P_genplist_t *plist;  IN: Property list to check
         const char *name;       IN: Name of property to query
+        void *value;            OUT: Pointer to the buffer for the property value
  RETURNS
-    Directly returns the value of the property in the list
+    Returns non-negative on success, negative on failure.
  DESCRIPTION
-        This function directly returns the value of a property in a property
-    list.  Because this function is only able to just copy a particular property
-    value to the return value, there is no way to check for errors.  We attempt
-    to make certain that bad things don't happen by validating that the size of
-    the property is the same as the size of the return type, but that can't
-    catch all errors.
-        This function does call the user's 'get' callback routine still.
-
+        Retrieves a "shallow" copy of the value for a property in a property
+    list.  The property name must exist or this routine will fail.  If there
+    is a 'get' callback routine registered for this property, it is _NOT_
+    called.
  GLOBAL VARIABLES
  COMMENTS, BUGS, ASSUMPTIONS
-    No error checking!
-    Use with caution!
+        This routine may not be called for zero-sized properties and will
+    return an error in that case.
  EXAMPLES
  REVISION LOG
 --------------------------------------------------------------------------*/
-hid_t
-H5P_peek_hid_t(H5P_genplist_t *plist, const char *name)
+herr_t
+H5P_peek(H5P_genplist_t *plist, const char *name, void *value)
 {
-    hid_t ret_value;            /* return value */
+    H5P_prop_get_ud_t udata;       /* User data for callback */
+    herr_t ret_value = SUCCEED;     /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
+    /* Sanity check */
     HDassert(plist);
     HDassert(name);
+    HDassert(value);
 
-    /* Get the value to return, don't worry about the return value, we can't return it */
-    H5P_get(plist,name,&ret_value);
+    /* Find the property and peek at the value */
+    udata.value = value;
+    if(H5P__do_prop(plist, name, H5P__peek_cb, H5P__peek_cb, &udata) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTOPERATE, FAIL, "can't operate on plist to peek at value")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}   /* H5P_peek_hid_t() */
+} /* H5P_peek() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5P_peek_voidp
+    H5P__get_cb
  PURPOSE
-    Internal routine to quickly retrieve the value of a property in a property list.
+    Internal callback for H5P__do_prop, to get a property's value in a property list.
  USAGE
-    void *H5P_peek_voidp(plist, name)
-        H5P_genplist_t *plist;  IN: Property list to check
-        const char *name;       IN: Name of property to query
+    herr_t H5P__get_plist_cb(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to get property in
+        const char *name;       IN: Name of property to get
+        H5P_genprop_t *prop;    IN: Property to get
+        void *udata;            IN: User data for operation
  RETURNS
-    Directly returns the value of the property in the list
+    Returns non-negative on success, negative on failure.
  DESCRIPTION
-        This function directly returns the value of a property in a property
-    list.  Because this function is only able to just copy a particular property
-    value to the return value, there is no way to check for errors.  We attempt
-    to make certain that bad things don't happen by validating that the size of
-    the property is the same as the size of the return type, but that can't
-    catch all errors.
-        This function does call the user's 'get' callback routine still.
-
+        Gets a new value for a property in a property list.
  GLOBAL VARIABLES
  COMMENTS, BUGS, ASSUMPTIONS
-    No error checking!
-    Use with caution!
+    Called when the property is found in the property list and when it's found
+        for the property class.
  EXAMPLES
  REVISION LOG
 --------------------------------------------------------------------------*/
-void *
-H5P_peek_voidp(H5P_genplist_t *plist, const char *name)
+static herr_t
+H5P__get_cb(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void *_udata)
 {
-    void * ret_value;            /* return value */
+    H5P_prop_get_ud_t *udata = (H5P_prop_get_ud_t *)_udata;    /* User data for callback */
+    void *tmp_value = NULL;     /* Temporary value for property */
+    herr_t ret_value = SUCCEED; /* Return value */
 
-    FUNC_ENTER_NOAPI(NULL)
+    FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(plist);
     HDassert(name);
+    HDassert(prop);
 
-    /* Get the value to return, don't worry about the return value, we can't return it */
-    H5P_get(plist,name,&ret_value);
+    /* Check for property size >0 */
+    if(0 == prop->size)
+        HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "property has zero size")
+
+    /* Call the 'get' callback, if there is one */
+    if(NULL != prop->get) {
+        /* Make a copy of the current value, in case the callback fails */
+        if(NULL == (tmp_value = H5MM_malloc(prop->size)))
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "memory allocation failed temporary property value")
+        HDmemcpy(tmp_value, prop->value, prop->size);
+
+        /* Call user's callback */
+        if((*(prop->get))(plist->plist_id, name, prop->size, tmp_value) < 0)
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't set property value")
+
+        /* Copy new [possibly unchanged] value into return value */
+        HDmemcpy(udata->value, tmp_value, prop->size);
+    } /* end if */
+    /* No 'get' callback, just copy value */
+    else
+        HDmemcpy(udata->value, prop->value, prop->size);
 
 done:
+    /* Free the temporary value buffer */
+    if(tmp_value)
+        H5MM_xfree(tmp_value);
+
     FUNC_LEAVE_NOAPI(ret_value)
-}   /* H5P_peek_voidp() */
+}   /* H5P__get_cb() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5P_peek_size_t
+    H5P_get
  PURPOSE
-    Internal routine to quickly retrieve the value of a property in a property list.
+    Internal routine to query the value of a property in a property list.
  USAGE
-    hsize_t H5P_peek_size_t(plist, name)
+    herr_t H5P_get(plist, name, value)
         H5P_genplist_t *plist;  IN: Property list to check
         const char *name;       IN: Name of property to query
+        void *value;            OUT: Pointer to the buffer for the property value
  RETURNS
-    Directly returns the value of the property in the list
+    Returns non-negative on success, negative on failure.
  DESCRIPTION
-        This function directly returns the value of a property in a property
-    list.  Because this function is only able to just copy a particular property
-    value to the return value, there is no way to check for errors.  We attempt
-    to make certain that bad things don't happen by validating that the size of
-    the property is the same as the size of the return type, but that can't
-    catch all errors.
-        This function does call the user's 'get' callback routine still.
+        Retrieves a copy of the value for a property in a property list.  The
+    property name must exist or this routine will fail.  If there is a
+    'get' callback routine registered for this property, the copy of the
+    value of the property will first be passed to that routine and any changes
+    to the copy of the value will be used when returning the property value
+    from this routine.
+        If the 'get' callback routine returns an error, 'value' will not be
+    modified and this routine will return an error.  This routine may not be
+    called for zero-sized properties.
 
  GLOBAL VARIABLES
  COMMENTS, BUGS, ASSUMPTIONS
-    No error checking!
-    Use with caution!
  EXAMPLES
  REVISION LOG
 --------------------------------------------------------------------------*/
-size_t
-H5P_peek_size_t(H5P_genplist_t *plist, const char *name)
+herr_t
+H5P_get(H5P_genplist_t *plist, const char *name, void *value)
 {
-    size_t ret_value;            /* return value */
+    H5P_prop_get_ud_t udata;    /* User data for callback */
+    herr_t ret_value = SUCCEED; /* Return value */
 
-    FUNC_ENTER_NOAPI(UFAIL)
+    FUNC_ENTER_NOAPI(FAIL)
 
+    /* Sanity check */
     HDassert(plist);
     HDassert(name);
+    HDassert(value);
 
-    /* Get the value to return, don't worry about the return value, we can't return it */
-    H5P_get(plist,name,&ret_value);
+    /* Find the property and get the value */
+    udata.value = value;
+    if(H5P__do_prop(plist, name, H5P__get_cb, H5P__get_cb, &udata) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTOPERATE, FAIL, "can't operate on plist to get value")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}   /* H5P_peek_size_t() */
+}   /* H5P_get() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5P_get
+    H5P__del_plist_cb
  PURPOSE
-    Internal routine to query the value of a property in a property list.
+    Internal callback for H5P__do_prop, to remove a property's value in a property list.
  USAGE
-    herr_t H5P_get(plist, name, value)
-        H5P_genplist_t *plist;  IN: Property list to check
-        const char *name;       IN: Name of property to query
-        void *value;            OUT: Pointer to the buffer for the property value
+    herr_t H5P__del_plist_cb(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to remove property from
+        const char *name;       IN: Name of property to remove
+        H5P_genprop_t *prop;    IN: Property to remove
+        void *udata;            IN: User data for operation
  RETURNS
     Returns non-negative on success, negative on failure.
  DESCRIPTION
-        Retrieves a copy of the value for a property in a property list.  The
-    property name must exist or this routine will fail.  If there is a
-    'get' callback routine registered for this property, the copy of the
-    value of the property will first be passed to that routine and any changes
-    to the copy of the value will be used when returning the property value
-    from this routine.
-        If the 'get' callback routine returns an error, 'value' will not be
-    modified and this routine will return an error.  This routine may not be
-    called for zero-sized properties.
-
+        Remove a property in a property list.  Called when the
+    property is found in the property list.
  GLOBAL VARIABLES
  COMMENTS, BUGS, ASSUMPTIONS
  EXAMPLES
  REVISION LOG
 --------------------------------------------------------------------------*/
-herr_t
-H5P_get(const H5P_genplist_t *plist, const char *name, void *value)
+static herr_t
+H5P__del_plist_cb(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void H5_ATTR_UNUSED *_udata)
 {
-    H5P_genclass_t *tclass;     /* Temporary class pointer */
-    H5P_genprop_t *prop;        /* Temporary property pointer */
-    herr_t      ret_value=SUCCEED;       /* Return value */
+    char *del_name = NULL;      /* Pointer to deleted name */
+    herr_t ret_value = SUCCEED; /* Return value */
 
-    FUNC_ENTER_NOAPI(FAIL)
+    FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(plist);
     HDassert(name);
-    HDassert(value);
+    HDassert(prop);
 
-    /* Check if the property has been deleted */
-    if(H5SL_search(plist->del,name)!=NULL)
-        HGOTO_ERROR(H5E_PLIST, H5E_NOTFOUND, FAIL, "property doesn't exist")
+    /* Pass value to 'close' callback, if it exists */
+    if(NULL != prop->del) {
+        /* Call user's callback */
+        if((*(prop->del))(plist->plist_id, name, prop->size, prop->value) < 0)
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "can't release property value")
+    } /* end if */
 
-    /* Find property */
-    if((prop = (H5P_genprop_t *)H5SL_search(plist->props,name))!=NULL) {
-        /* Check for property size >0 */
-        if(prop->size==0)
-            HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "property has zero size")
+    /* Duplicate string for insertion into new deleted property skip list */
+    if(NULL == (del_name = H5MM_xstrdup(name)))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "memory allocation failed")
 
-        /* Make a copy of the value and pass to 'get' callback */
-        if(prop->get!=NULL) {
-            void *tmp_value;            /* Temporary value for property */
+    /* Insert property name into deleted list */
+    if(H5SL_insert(plist->del, del_name, del_name) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into deleted skip list")
 
-            /* Make a copy of the current value, in case the callback fails */
-            if(NULL==(tmp_value=H5MM_malloc(prop->size)))
-                HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed temporary property value")
-            HDmemcpy(tmp_value,prop->value,prop->size);
+    /* Remove the property from the skip list */
+    if(NULL == H5SL_remove(plist->props, prop->name))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTDELETE, FAIL, "can't remove property from skip list")
 
-            /* Call user's callback */
-            if((*(prop->get))(plist->plist_id,name,prop->size,tmp_value) < 0)
-                HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't get property value")
+    /* Free the property, ignoring return value, nothing we can do */
+    H5P_free_prop(prop);
 
-            /* Copy new [possibly unchanged] value into return value */
-            HDmemcpy(value,tmp_value,prop->size);
+    /* Decrement the number of properties in list */
+    plist->nprops--;
 
-            /* Free the temporary value buffer */
-            H5MM_xfree(tmp_value);
-        } /* end if */
-        /* No 'get' callback, just copy value */
-        else
-            HDmemcpy(value,prop->value,prop->size);
-    } /* end if */
-    else {
-        /*
-         * Check if we should get class properties (up through list of parent classes also),
-         * & make property 'get' callback.
-         */
-        tclass=plist->pclass;
-        while(tclass!=NULL) {
-            if(tclass->nprops>0) {
-                /* Find the property in the class */
-                if((prop = (H5P_genprop_t *)H5SL_search(tclass->props,name))!=NULL) {
-                    /* Check for property size >0 */
-                    if(prop->size==0)
-                        HGOTO_ERROR(H5E_PLIST,H5E_BADVALUE,FAIL,"property has zero size")
-
-                    /* Call the 'get' callback, if there is one */
-                    if(prop->get!=NULL) {
-                        void *tmp_value;            /* Temporary value for property */
+done:
+    /* Error cleanup */
+    if(ret_value < 0)
+        if(del_name)
+            H5MM_xfree(del_name);
 
-                        /* Make a copy of the current value, in case the callback fails */
-                        if(NULL==(tmp_value=H5MM_malloc(prop->size)))
-                            HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed temporary property value")
-                        HDmemcpy(tmp_value,prop->value,prop->size);
+    FUNC_LEAVE_NOAPI(ret_value)
+}   /* H5P__del_plist_cb() */
 
-                        /* Call user's callback */
-                        if((*(prop->get))(plist->plist_id,name,prop->size,tmp_value) < 0) {
-                            H5MM_xfree(tmp_value);
-                            HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't set property value")
-                        } /* end if */
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5P__del_pclass_cb
+ PURPOSE
+    Internal callback for H5P__do_prop, to remove a property's value in a property list.
+ USAGE
+    herr_t H5P__del_pclass_cb(plist, name, value)
+        H5P_genplist_t *plist;  IN: Property list to remove property from
+        const char *name;       IN: Name of property to remove
+        H5P_genprop_t *prop;    IN: Property to remove
+        void *udata;            IN: User data for operation
+ RETURNS
+    Returns non-negative on success, negative on failure.
+ DESCRIPTION
+        Remove a property in a property list.  Called when the
+    property is found in the property class.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+static herr_t
+H5P__del_pclass_cb(H5P_genplist_t *plist, const char *name, H5P_genprop_t *prop,
+    void H5_ATTR_UNUSED *_udata)
+{
+    char *del_name = NULL;      /* Pointer to deleted name */
+    void *tmp_value = NULL;     /* Temporary value for property */
+    herr_t ret_value = SUCCEED; /* Return value */
 
-                        if((prop->cmp)(tmp_value,prop->value,prop->size)) {
-                            H5P_genprop_t *pcopy;  /* Copy of property to insert into skip list */
+    FUNC_ENTER_STATIC
 
-                            /* Make a copy of the class's property */
-                            if((pcopy=H5P_dup_prop(prop,H5P_PROP_WITHIN_LIST)) == NULL)
-                                HGOTO_ERROR(H5E_PLIST,H5E_CANTCOPY,FAIL,"Can't copy property")
+    /* Sanity check */
+    HDassert(plist);
+    HDassert(name);
+    HDassert(prop);
 
-                            /* Copy new value into property value */
-                            HDmemcpy(pcopy->value,tmp_value,prop->size);
+    /* Pass value to 'del' callback, if it exists */
+    if(NULL != prop->del) {
+        /* Allocate space for a temporary copy of the property value */
+        if(NULL == (tmp_value = H5MM_malloc(prop->size)))
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "memory allocation failed for temporary property value")
+        HDmemcpy(tmp_value, prop->value, prop->size);
 
-                            /* Insert the changed property into the property list */
-                            if(H5P_add_prop(plist->props,pcopy) < 0)
-                                HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL,"Can't insert changed property into skip list")
-                        } /* end if */
+        /* Call user's callback */
+        if((*(prop->del))(plist->plist_id, name, prop->size, tmp_value) < 0)
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't close property value")
+    } /* end if */
 
-                        /* Copy new [possibly unchanged] value into return value */
-                        HDmemcpy(value,tmp_value,prop->size);
+    /* Duplicate string for insertion into new deleted property skip list */
+    if(NULL == (del_name = H5MM_xstrdup(name)))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "memory allocation failed")
 
-                        /* Free the temporary value buffer */
-                        H5MM_xfree(tmp_value);
-                    } /* end if */
-                    /* No 'get' callback, just copy value */
-                    else
-                        HDmemcpy(value,prop->value,prop->size);
+    /* Insert property name into deleted list */
+    if(H5SL_insert(plist->del, del_name, del_name) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into deleted skip list")
 
-                    /* Leave */
-                    HGOTO_DONE(SUCCEED);
-                } /* end while */
-            } /* end if */
+    /* Decrement the number of properties in list */
+    plist->nprops--;
 
-            /* Go up to parent class */
-            tclass=tclass->parent;
-        } /* end while */
+done:
+    /* Free the temporary value buffer */
+    if(tmp_value)
+        H5MM_xfree(tmp_value);
 
-        /* If we get this far, then it wasn't in the list of changed properties,
-         * nor in the properties in the class hierarchy, indicate an error
-         */
-        HGOTO_ERROR(H5E_PLIST,H5E_NOTFOUND,FAIL,"can't find property in skip list")
-    } /* end else */
+    /* Error cleanup */
+    if(ret_value < 0)
+        if(del_name)
+            H5MM_xfree(del_name);
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
-}   /* H5P_get() */
+}   /* H5P__del_pclass_cb() */
 
 
 /*--------------------------------------------------------------------------
@@ -4209,104 +4532,19 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 herr_t
-H5P_remove(hid_t plist_id, H5P_genplist_t *plist, const char *name)
+H5P_remove(H5P_genplist_t *plist, const char *name)
 {
-    H5P_genclass_t *tclass;     /* Temporary class pointer */
-    H5P_genprop_t *prop;        /* Temporary property pointer */
-    char *del_name;             /* Pointer to deleted name */
-    herr_t ret_value=SUCCEED;   /* Return value */
+    herr_t ret_value = SUCCEED;   /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
+    /* Sanity check */
     HDassert(plist);
     HDassert(name);
 
-    /* Indicate that the property isn't in the list if it has been deleted already */
-    if(H5SL_search(plist->del,name)!=NULL)
-        HGOTO_ERROR(H5E_PLIST,H5E_NOTFOUND,FAIL,"can't find property in skip list")
-
-    /* Get the property node from the changed property skip list */
-    if((prop = (H5P_genprop_t *)H5SL_search(plist->props,name))!=NULL) {
-        /* Pass value to 'close' callback, if it exists */
-        if(prop->del!=NULL) {
-            /* Call user's callback */
-            if((*(prop->del))(plist_id,name,prop->size,prop->value) < 0)
-                HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't close property value")
-        } /* end if */
-
-        /* Duplicate string for insertion into new deleted property skip list */
-        if((del_name=H5MM_xstrdup(name)) == NULL)
-            HGOTO_ERROR(H5E_RESOURCE,H5E_NOSPACE,FAIL,"memory allocation failed")
-
-        /* Insert property name into deleted list */
-        if(H5SL_insert(plist->del,del_name,del_name) < 0)
-            HGOTO_ERROR(H5E_PLIST,H5E_CANTINSERT,FAIL,"can't insert property into deleted skip list")
-
-        /* Remove the property from the skip list */
-        if(H5SL_remove(plist->props,prop->name) == NULL)
-            HGOTO_ERROR(H5E_PLIST,H5E_CANTDELETE,FAIL,"can't remove property from skip list")
-
-        /* Free the property, ignoring return value, nothing we can do */
-        H5P_free_prop(prop);
-
-        /* Decrement the number of properties in list */
-        plist->nprops--;
-    } /* end if */
-    /* Walk through all the properties in the class hierarchy, looking for the property */
-    else {
-        /*
-         * Check if we should delete class properties (up through list of parent classes also),
-         * & make property 'delete' callback.
-         */
-        tclass=plist->pclass;
-        while(tclass!=NULL) {
-            if(tclass->nprops>0) {
-                /* Find the property in the class */
-                if((prop=H5P_find_prop_pclass(tclass,name))!=NULL) {
-                    /* Pass value to 'del' callback, if it exists */
-                    if(prop->del!=NULL) {
-                        void *tmp_value;       /* Temporary value buffer */
-
-                        /* Allocate space for a temporary copy of the property value */
-                        if(NULL==(tmp_value=H5MM_malloc(prop->size)))
-                            HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for temporary property value")
-                        HDmemcpy(tmp_value,prop->value,prop->size);
-
-                        /* Call user's callback */
-                        if((*(prop->del))(plist_id,name,prop->size,tmp_value) < 0) {
-                            H5MM_xfree(tmp_value);
-                            HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't close property value")
-                        } /* end if */
-
-                        /* Release the temporary value buffer */
-                        H5MM_xfree(tmp_value);
-                    } /* end if */
-
-                    /* Duplicate string for insertion into new deleted property skip list */
-                    if((del_name=H5MM_xstrdup(name)) == NULL)
-                        HGOTO_ERROR(H5E_RESOURCE,H5E_NOSPACE,FAIL,"memory allocation failed")
-
-                    /* Insert property name into deleted list */
-                    if(H5SL_insert(plist->del,del_name,del_name) < 0)
-                        HGOTO_ERROR(H5E_PLIST,H5E_CANTINSERT,FAIL,"can't insert property into deleted skip list")
-
-                    /* Decrement the number of properties in list */
-                    plist->nprops--;
-
-                    /* Leave */
-                    HGOTO_DONE(SUCCEED);
-                } /* end while */
-            } /* end if */
-
-            /* Go up to parent class */
-            tclass=tclass->parent;
-        } /* end while */
-
-        /* If we get this far, then it wasn't in the list of changed properties,
-         * nor in the properties in the class hierarchy, indicate an error
-         */
-        HGOTO_ERROR(H5E_PLIST,H5E_NOTFOUND,FAIL,"can't find property in skip list")
-    } /* end else */
+    /* Find the property and get the value */
+    if(H5P__do_prop(plist, name, H5P__del_plist_cb, H5P__del_pclass_cb, NULL) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTOPERATE, FAIL, "can't operate on plist to remove value")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
@@ -4364,7 +4602,7 @@ H5P_copy_prop_plist(hid_t dst_id, hid_t src_id, const char *name)
     /* If the property exists in the destination alread */
     if(NULL != H5P__find_prop_plist(dst_plist, name)) {
         /* Delete the property from the destination list, calling the 'close' callback if necessary */
-        if(H5P_remove(dst_id,dst_plist,name) < 0)
+        if(H5P_remove(dst_plist, name) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTDELETE, FAIL, "unable to remove property")
 
         /* Get the pointer to the source property */
@@ -4759,7 +4997,7 @@ done:
 char *
 H5P_get_class_name(H5P_genclass_t *pclass)
 {
-    char *ret_value;      /* return value */
+    char *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -4797,7 +5035,7 @@ done:
 char *
 H5P_get_class_path(H5P_genclass_t *pclass)
 {
-    char *ret_value;    /* return value */
+    char *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -4863,7 +5101,7 @@ H5P_open_class_path(const char *path)
     char *delimit;              /* Pointer to path delimiter during traversal */
     H5P_genclass_t *curr_class; /* Pointer to class during path traversal */
     H5P_check_class_t check_info;   /* Structure to hold the information for checking duplicate names */
-    H5P_genclass_t *ret_value;  /* Return value */
+    H5P_genclass_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -4943,7 +5181,7 @@ done:
 H5P_genclass_t *
 H5P_get_class_parent(const H5P_genclass_t *pclass)
 {
-    H5P_genclass_t *ret_value;      /* return value */
+    H5P_genclass_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -5010,7 +5248,7 @@ H5P__new_plist_of_type(H5P_plist_type_t type)
 {
     H5P_genclass_t *pclass;     /* Class of property list to create */
     hid_t class_id;             /* ID of class to create */
-    hid_t ret_value;            /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;  /* Return value */
 
     FUNC_ENTER_PACKAGE
 
diff --git a/src/H5Plapl.c b/src/H5Plapl.c
index e3b3c4f..f70fe5e 100644
--- a/src/H5Plapl.c
+++ b/src/H5Plapl.c
@@ -27,7 +27,9 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
+
 
 /***********/
 /* Headers */
@@ -55,22 +57,26 @@
 /* Definitions for external link prefix */
 #define H5L_ACS_ELINK_PREFIX_SIZE        sizeof(char *)
 #define H5L_ACS_ELINK_PREFIX_DEF         NULL /*default is no prefix */
-#define H5L_ACS_ELINK_PREFIX_ENC         H5P_lacc_elink_pref_enc
-#define H5L_ACS_ELINK_PREFIX_DEC         H5P_lacc_elink_pref_dec
-#define H5L_ACS_ELINK_PREFIX_DEL         H5P_lacc_elink_pref_del
-#define H5L_ACS_ELINK_PREFIX_COPY        H5P_lacc_elink_pref_copy
-#define H5L_ACS_ELINK_PREFIX_CMP         H5P_lacc_elink_pref_cmp
-#define H5L_ACS_ELINK_PREFIX_CLOSE       H5P_lacc_elink_pref_close
+#define H5L_ACS_ELINK_PREFIX_SET         H5P__lacc_elink_pref_set
+#define H5L_ACS_ELINK_PREFIX_GET         H5P__lacc_elink_pref_get
+#define H5L_ACS_ELINK_PREFIX_ENC         H5P__lacc_elink_pref_enc
+#define H5L_ACS_ELINK_PREFIX_DEC         H5P__lacc_elink_pref_dec
+#define H5L_ACS_ELINK_PREFIX_DEL         H5P__lacc_elink_pref_del
+#define H5L_ACS_ELINK_PREFIX_COPY        H5P__lacc_elink_pref_copy
+#define H5L_ACS_ELINK_PREFIX_CMP         H5P__lacc_elink_pref_cmp
+#define H5L_ACS_ELINK_PREFIX_CLOSE       H5P__lacc_elink_pref_close
 
 /* Definitions for setting fapl of external link access */
 #define H5L_ACS_ELINK_FAPL_SIZE        	sizeof(hid_t)
 #define H5L_ACS_ELINK_FAPL_DEF         	H5P_DEFAULT
-#define H5L_ACS_ELINK_FAPL_ENC		H5P_lacc_elink_fapl_enc
-#define H5L_ACS_ELINK_FAPL_DEC         	H5P_lacc_elink_fapl_dec
-#define H5L_ACS_ELINK_FAPL_DEL		H5P_lacc_elink_fapl_del
-#define H5L_ACS_ELINK_FAPL_COPY        	H5P_lacc_elink_fapl_copy
-#define H5L_ACS_ELINK_FAPL_CMP        	H5P_lacc_elink_fapl_cmp
-#define H5L_ACS_ELINK_FAPL_CLOSE       	H5P_lacc_elink_fapl_close
+#define H5L_ACS_ELINK_FAPL_SET		H5P__lacc_elink_fapl_set
+#define H5L_ACS_ELINK_FAPL_GET		H5P__lacc_elink_fapl_get
+#define H5L_ACS_ELINK_FAPL_ENC		H5P__lacc_elink_fapl_enc
+#define H5L_ACS_ELINK_FAPL_DEC         	H5P__lacc_elink_fapl_dec
+#define H5L_ACS_ELINK_FAPL_DEL		H5P__lacc_elink_fapl_del
+#define H5L_ACS_ELINK_FAPL_COPY        	H5P__lacc_elink_fapl_copy
+#define H5L_ACS_ELINK_FAPL_CMP        	H5P__lacc_elink_fapl_cmp
+#define H5L_ACS_ELINK_FAPL_CLOSE       	H5P__lacc_elink_fapl_close
 
 /* Definitions for file access flags for external link traversal */
 #define H5L_ACS_ELINK_FLAGS_SIZE        sizeof(unsigned)
@@ -98,21 +104,25 @@
 /********************/
 
 /* Property class callbacks */
-static herr_t H5P_lacc_reg_prop(H5P_genclass_t *pclass);
+static herr_t H5P__lacc_reg_prop(H5P_genclass_t *pclass);
 
 /* Property list callbacks */
-static herr_t H5P_lacc_elink_pref_enc(const void *value, void **_pp, size_t *size);
-static herr_t H5P_lacc_elink_pref_dec(const void **_pp, void *value);
-static herr_t H5P_lacc_elink_pref_del(hid_t prop_id, const char* name, size_t size, void* value);
-static herr_t H5P_lacc_elink_pref_copy(const char* name, size_t size, void* value);
-static int H5P_lacc_elink_pref_cmp(const void *value1, const void *value2, size_t size);
-static herr_t H5P_lacc_elink_pref_close(const char* name, size_t size, void* value);
-static herr_t H5P_lacc_elink_fapl_enc(const void *value, void **_pp, size_t *size);
-static herr_t H5P_lacc_elink_fapl_dec(const void **_pp, void *value);
-static herr_t H5P_lacc_elink_fapl_del(hid_t prop_id, const char* name, size_t size, void* value);
-static herr_t H5P_lacc_elink_fapl_copy(const char* name, size_t size, void* value);
-static int H5P_lacc_elink_fapl_cmp(const void *value1, const void *value2, size_t size);
-static herr_t H5P_lacc_elink_fapl_close(const char* name, size_t size, void* value);
+static herr_t H5P__lacc_elink_pref_set(hid_t prop_id, const char* name, size_t size, void* value);
+static herr_t H5P__lacc_elink_pref_get(hid_t prop_id, const char* name, size_t size, void* value);
+static herr_t H5P__lacc_elink_pref_enc(const void *value, void **_pp, size_t *size);
+static herr_t H5P__lacc_elink_pref_dec(const void **_pp, void *value);
+static herr_t H5P__lacc_elink_pref_del(hid_t prop_id, const char* name, size_t size, void* value);
+static herr_t H5P__lacc_elink_pref_copy(const char* name, size_t size, void* value);
+static int H5P__lacc_elink_pref_cmp(const void *value1, const void *value2, size_t size);
+static herr_t H5P__lacc_elink_pref_close(const char* name, size_t size, void* value);
+static herr_t H5P__lacc_elink_fapl_set(hid_t prop_id, const char* name, size_t size, void* value);
+static herr_t H5P__lacc_elink_fapl_get(hid_t prop_id, const char* name, size_t size, void* value);
+static herr_t H5P__lacc_elink_fapl_enc(const void *value, void **_pp, size_t *size);
+static herr_t H5P__lacc_elink_fapl_dec(const void **_pp, void *value);
+static herr_t H5P__lacc_elink_fapl_del(hid_t prop_id, const char* name, size_t size, void* value);
+static herr_t H5P__lacc_elink_fapl_copy(const char* name, size_t size, void* value);
+static int H5P__lacc_elink_fapl_cmp(const void *value1, const void *value2, size_t size);
+static herr_t H5P__lacc_elink_fapl_close(const char* name, size_t size, void* value);
 
 
 /*********************/
@@ -128,7 +138,7 @@ const H5P_libclass_t H5P_CLS_LACC[1] = {{
     &H5P_CLS_LINK_ACCESS_g,	/* Pointer to class             */
     &H5P_CLS_LINK_ACCESS_ID_g,	/* Pointer to class ID          */
     &H5P_LST_LINK_ACCESS_ID_g,	/* Pointer to default property list ID */
-    H5P_lacc_reg_prop,		/* Default property registration routine */
+    H5P__lacc_reg_prop,		/* Default property registration routine */
 
     NULL,		        /* Class creation callback      */
     NULL,		        /* Class creation callback info */
@@ -158,7 +168,7 @@ static const H5L_elink_cb_t H5L_def_elink_cb_g = H5L_ACS_ELINK_CB_DEF; /* Defaul
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5P_lacc_reg_prop
+ * Function:    H5P__lacc_reg_prop
  *
  * Purpose:     Register the dataset creation property list class's properties
  *
@@ -167,18 +177,14 @@ static const H5L_elink_cb_t H5L_def_elink_cb_g = H5L_ACS_ELINK_CB_DEF; /* Defaul
  * Programmer:  Quincey Koziol
  *              October 31, 2006
  *
- * Modifications:
- *	Vailin Choi, Sept. 12th 2008
- *	Register the setting of file access property list for link access
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P_lacc_reg_prop(H5P_genclass_t *pclass)
+H5P__lacc_reg_prop(H5P_genclass_t *pclass)
 {
     herr_t ret_value = SUCCEED;         	   /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Register property for number of links traversed */
     if(H5P_register_real(pclass, H5L_ACS_NLINKS_NAME, H5L_ACS_NLINKS_SIZE, &H5L_def_nlinks_g, 
@@ -188,13 +194,13 @@ H5P_lacc_reg_prop(H5P_genclass_t *pclass)
 
     /* Register property for external link prefix */
     if(H5P_register_real(pclass, H5L_ACS_ELINK_PREFIX_NAME, H5L_ACS_ELINK_PREFIX_SIZE, &H5L_def_elink_prefix_g, 
-            NULL, NULL, NULL, H5L_ACS_ELINK_PREFIX_ENC, H5L_ACS_ELINK_PREFIX_DEC,
+            NULL, H5L_ACS_ELINK_PREFIX_SET, H5L_ACS_ELINK_PREFIX_GET, H5L_ACS_ELINK_PREFIX_ENC, H5L_ACS_ELINK_PREFIX_DEC,
             H5L_ACS_ELINK_PREFIX_DEL, H5L_ACS_ELINK_PREFIX_COPY, H5L_ACS_ELINK_PREFIX_CMP, H5L_ACS_ELINK_PREFIX_CLOSE) < 0)
          HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register fapl for link access */
     if(H5P_register_real(pclass, H5L_ACS_ELINK_FAPL_NAME, H5L_ACS_ELINK_FAPL_SIZE, &H5L_def_fapl_id_g, 
-             NULL, NULL, NULL, H5L_ACS_ELINK_FAPL_ENC, H5L_ACS_ELINK_FAPL_DEC,
+             NULL, H5L_ACS_ELINK_FAPL_SET, H5L_ACS_ELINK_FAPL_GET, H5L_ACS_ELINK_FAPL_ENC, H5L_ACS_ELINK_FAPL_DEC,
              H5L_ACS_ELINK_FAPL_DEL, H5L_ACS_ELINK_FAPL_COPY, H5L_ACS_ELINK_FAPL_CMP, H5L_ACS_ELINK_FAPL_CLOSE) < 0)
          HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
@@ -212,11 +218,97 @@ H5P_lacc_reg_prop(H5P_genclass_t *pclass)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_lacc_reg_prop() */
+} /* end H5P__lacc_reg_prop() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__lacc_elink_fapl_set
+ *
+ * Purpose:     Copies an external link FAPL property when it's set for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Wednesday, Sept 2, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__lacc_elink_fapl_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    hid_t          l_fapl_id;
+    herr_t         ret_value = SUCCEED;
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Get the FAPL ID */
+    l_fapl_id = *(const hid_t *)value;
+
+    /* Duplicate the FAPL, if it's non-default */
+    if(l_fapl_id != H5P_DEFAULT) {
+        H5P_genplist_t *l_fapl_plist;
+
+        if(NULL == (l_fapl_plist = (H5P_genplist_t *)H5P_object_verify(l_fapl_id, H5P_FILE_ACCESS)))
+            HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "can't get property list")
+	if(((*(hid_t *)value) = H5P_copy_plist(l_fapl_plist, FALSE)) < 0)
+	    HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "unable to copy file access property list")
+    } /* end if */
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__lacc_elink_fapl_set() */
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P_lacc_elink_fapl_enc
+ * Function:    H5P__lacc_elink_fapl_get
+ *
+ * Purpose:     Copies an external link FAPL property when it's retrieved from a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Wednesday, Sept 2, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__lacc_elink_fapl_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    hid_t          l_fapl_id;
+    herr_t         ret_value = SUCCEED;
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Get the FAPL ID */
+    l_fapl_id = *(const hid_t *)value;
+
+    /* Duplicate the FAPL, if it's non-default */
+    if(l_fapl_id != H5P_DEFAULT) {
+        H5P_genplist_t *l_fapl_plist;
+
+        if(NULL == (l_fapl_plist = (H5P_genplist_t *)H5P_object_verify(l_fapl_id, H5P_FILE_ACCESS)))
+            HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "can't get property list")
+	if(((*(hid_t *)value) = H5P_copy_plist(l_fapl_plist, FALSE)) < 0)
+	    HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "unable to copy file access property list")
+    } /* end if */
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__lacc_elink_fapl_get() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:       H5P__lacc_elink_fapl_enc
  *
  * Purpose:        Callback routine which is called whenever the elink FAPL
  *                 property in the dataset access property list is
@@ -231,7 +323,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P_lacc_elink_fapl_enc(const void *value, void **_pp, size_t *size)
+H5P__lacc_elink_fapl_enc(const void *value, void **_pp, size_t *size)
 {
     const hid_t *elink_fapl = (const hid_t *)value;     /* Property to encode */
     uint8_t **pp = (uint8_t **)_pp;
@@ -240,7 +332,7 @@ H5P_lacc_elink_fapl_enc(const void *value, void **_pp, size_t *size)
     size_t fapl_size = 0;                /* FAPL's encoded size */
     herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Check for non-default FAPL */
     if(*elink_fapl != H5P_DEFAULT) {
@@ -284,11 +376,11 @@ H5P_lacc_elink_fapl_enc(const void *value, void **_pp, size_t *size)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_lacc_elink_fapl_enc() */
+} /* end H5P__lacc_elink_fapl_enc() */
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P_lacc_elink_fapl_dec
+ * Function:       H5P__lacc_elink_fapl_dec
  *
  * Purpose:        Callback routine which is called whenever the elink FAPL
  *                 property in the dataset access property list is
@@ -303,15 +395,16 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P_lacc_elink_fapl_dec(const void **_pp, void *_value)
+H5P__lacc_elink_fapl_dec(const void **_pp, void *_value)
 {
     hid_t *elink_fapl = (hid_t *)_value;        /* The elink FAPL value */
     const uint8_t **pp = (const uint8_t **)_pp;
     hbool_t non_default_fapl;           /* Whether the FAPL is non-default */
     herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(pp);
     HDassert(*pp);
     HDassert(elink_fapl);
@@ -342,11 +435,11 @@ H5P_lacc_elink_fapl_dec(const void **_pp, void *_value)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_lacc_elink_fapl_dec() */
+} /* end H5P__lacc_elink_fapl_dec() */
 
 
 /*--------------------------------------------------------------------------
- * Function:	H5P_lacc_elink_fapl_del
+ * Function:	H5P__lacc_elink_fapl_del
  *
  * Purpose:	Close the FAPL for link access
  *
@@ -360,27 +453,30 @@ done:
  */
 /* ARGSUSED */
 static herr_t
-H5P_lacc_elink_fapl_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+H5P__lacc_elink_fapl_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
 {
     hid_t          l_fapl_id;
     herr_t         ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI(FAIL)
+    FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(value);
 
+    /* Get the FAPL ID */
     l_fapl_id = (*(const hid_t *)value);
 
-    if((l_fapl_id > H5P_DEFAULT) && (H5I_dec_ref(l_fapl_id) < 0))
+    /* Close the FAPL */
+    if(l_fapl_id != H5P_DEFAULT && H5I_dec_ref(l_fapl_id) < 0)
 	HGOTO_ERROR(H5E_PLIST, H5E_CANTRELEASE, FAIL, "unable to close atom for file access property list")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_lacc_elink_fapl_del() */
+} /* end H5P__lacc_elink_fapl_del() */
 
 
 /*--------------------------------------------------------------------------
- * Function:	H5P_lacc_elink_fapl_copy
+ * Function:	H5P__lacc_elink_fapl_copy
  *
  * Purpose:	Copy the FAPL for link access
  *
@@ -394,34 +490,36 @@ done:
  */
 /* ARGSUSED */
 static herr_t
-H5P_lacc_elink_fapl_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+H5P__lacc_elink_fapl_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
 {
     hid_t          l_fapl_id;
     herr_t         ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI(FAIL)
+    FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(value);
 
+    /* Get the FAPL ID */
     l_fapl_id = (*(const hid_t *)value);
 
-    if(l_fapl_id > H5P_DEFAULT) {
+    /* Duplicate the FAPL, if it's non-default */
+    if(l_fapl_id != H5P_DEFAULT) {
         H5P_genplist_t *l_fapl_plist;
 
         if(NULL == (l_fapl_plist = (H5P_genplist_t *)H5P_object_verify(l_fapl_id, H5P_FILE_ACCESS)))
-            HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "can't get property list")
-
+            HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "can't get property list")
 	if(((*(hid_t *)value) = H5P_copy_plist(l_fapl_plist, FALSE)) < 0)
-	    HGOTO_ERROR(H5E_INTERNAL, H5E_CANTINIT, FAIL, "unable to copy file access properties")
+	    HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "unable to copy file access property list")
     } /* end if */
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_lacc_elink_fapl_copy() */
+} /* end H5P__lacc_elink_fapl_copy() */
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P_lacc_elink_fapl_cmp
+ * Function:       H5P__lacc_elink_fapl_cmp
  *
  * Purpose:        Callback routine which is called whenever the elink FAPL
  *                 property in the link access property list is
@@ -435,14 +533,14 @@ done:
  *-------------------------------------------------------------------------
  */
 static int
-H5P_lacc_elink_fapl_cmp(const void *value1, const void *value2, size_t H5_ATTR_UNUSED size)
+H5P__lacc_elink_fapl_cmp(const void *value1, const void *value2, size_t H5_ATTR_UNUSED size)
 {
     const hid_t *fapl1 = (const hid_t *)value1;
     const hid_t *fapl2 = (const hid_t *)value2;
     H5P_genplist_t *obj1, *obj2;          /* Property lists to compare */
     int ret_value = 0;
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     /* Check for comparison with default value */
     if(*fapl1 == 0 && *fapl2 > 0) HGOTO_DONE(1);
@@ -464,11 +562,11 @@ H5P_lacc_elink_fapl_cmp(const void *value1, const void *value2, size_t H5_ATTR_U
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_lacc_elink_fapl_cmp() */
+} /* end H5P__lacc_elink_fapl_cmp() */
 
 
 /*--------------------------------------------------------------------------
- * Function:	H5P_lacc_elink_fapl_close
+ * Function:	H5P__lacc_elink_fapl_close
  *
  * Purpose:	Close the FAPL for link access
  *
@@ -482,26 +580,88 @@ done:
  */
 /* ARGSUSED */
 static herr_t
-H5P_lacc_elink_fapl_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+H5P__lacc_elink_fapl_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
 {
     hid_t		l_fapl_id;
     herr_t     		ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(value);
 
+    /* Get the FAPL ID */
     l_fapl_id = (*(const hid_t *)value);
+
+    /* Close the FAPL */
     if((l_fapl_id > H5P_DEFAULT) && (H5I_dec_ref(l_fapl_id) < 0))
 	HGOTO_ERROR(H5E_PLIST, H5E_CANTRELEASE, FAIL, "unable to close atom for file access property list")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_lacc_elink_fapl_close() */
+} /* end H5P__lacc_elink_fapl_close() */
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P_lacc_elink_pref_enc
+ * Function:    H5P__lacc_elink_pref_set
+ *
+ * Purpose:     Copies an external link prefix property when it's set for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Wednesday, Sept 2, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__lacc_elink_pref_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    FUNC_ENTER_STATIC_NOERR
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Copy the prefix */
+    *(char **)value = H5MM_xstrdup(*(const char **)value);
+
+    FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5P__lacc_elink_pref_set() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__lacc_elink_pref_get
+ *
+ * Purpose:     Copies an external link prefix property when it's retrieved from a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Wednesday, Sept 2, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__lacc_elink_pref_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    FUNC_ENTER_STATIC_NOERR
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Copy the prefix */
+    *(char **)value = H5MM_xstrdup(*(const char **)value);
+
+    FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5P__lacc_elink_pref_get() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:       H5P__lacc_elink_pref_enc
  *
  * Purpose:        Callback routine which is called whenever the elink flags
  *                 property in the dataset access property list is
@@ -516,7 +676,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P_lacc_elink_pref_enc(const void *value, void **_pp, size_t *size)
+H5P__lacc_elink_pref_enc(const void *value, void **_pp, size_t *size)
 {
     const char *elink_pref = *(const char * const *)value;
     uint8_t **pp = (uint8_t **)_pp;
@@ -524,7 +684,7 @@ H5P_lacc_elink_pref_enc(const void *value, void **_pp, size_t *size)
     uint64_t enc_value;
     unsigned enc_size;
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     HDcompile_assert(sizeof(size_t) <= sizeof(uint64_t));
 
@@ -553,11 +713,11 @@ H5P_lacc_elink_pref_enc(const void *value, void **_pp, size_t *size)
         *size += len;
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5P_lacc_elink_pref_enc() */
+} /* end H5P__lacc_elink_pref_enc() */
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P_lacc_elink_pref_dec
+ * Function:       H5P__lacc_elink_pref_dec
  *
  * Purpose:        Callback routine which is called whenever the elink prefix
  *                 property in the dataset access property list is
@@ -572,7 +732,7 @@ H5P_lacc_elink_pref_enc(const void *value, void **_pp, size_t *size)
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5P_lacc_elink_pref_dec(const void **_pp, void *_value)
+H5P__lacc_elink_pref_dec(const void **_pp, void *_value)
 {
     char **elink_pref = (char **)_value;
     const uint8_t **pp = (const uint8_t **)_pp;
@@ -581,7 +741,7 @@ H5P_lacc_elink_pref_dec(const void **_pp, void *_value)
     unsigned enc_size;                  /* Size of encoded property */
     herr_t ret_value = SUCCEED;
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     HDassert(pp);
     HDassert(*pp);
@@ -610,11 +770,11 @@ H5P_lacc_elink_pref_dec(const void **_pp, void *_value)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_lacc_elink_pref_dec() */
+} /* end H5P__lacc_elink_pref_dec() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5P_lacc_elink_pref_del
+ * Function:    H5P__lacc_elink_pref_del
  *
  * Purpose:     Frees memory used to store the external link prefix string
  *
@@ -627,20 +787,20 @@ done:
  */
 /* ARGSUSED */
 static herr_t
-H5P_lacc_elink_pref_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+H5P__lacc_elink_pref_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
 {
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     HDassert(value);
 
     H5MM_xfree(*(void **)value);
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5P_lacc_elink_pref_del() */
+} /* end H5P__lacc_elink_pref_del() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5P_lacc_elink_pref_copy
+ * Function:    H5P__lacc_elink_pref_copy
  *
  * Purpose:     Creates a copy of the external link prefix string
  *
@@ -653,20 +813,20 @@ H5P_lacc_elink_pref_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED
  */
 /* ARGSUSED */
 static herr_t
-H5P_lacc_elink_pref_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+H5P__lacc_elink_pref_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
 {
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     HDassert(value);
 
     *(char **)value = H5MM_xstrdup(*(const char **)value);
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5P_lacc_elink_pref_copy() */
+} /* end H5P__lacc_elink_pref_copy() */
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P_lacc_elink_pref_cmp
+ * Function:       H5P__lacc_elink_pref_cmp
  *
  * Purpose:        Callback routine which is called whenever the elink prefix
  *                 property in the dataset creation property list is
@@ -680,13 +840,13 @@ H5P_lacc_elink_pref_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED
  *-------------------------------------------------------------------------
  */
 static int
-H5P_lacc_elink_pref_cmp(const void *value1, const void *value2, size_t H5_ATTR_UNUSED size)
+H5P__lacc_elink_pref_cmp(const void *value1, const void *value2, size_t H5_ATTR_UNUSED size)
 {
     const char *pref1 = *(const char * const *)value1;
     const char *pref2 = *(const char * const *)value2;
     int ret_value = 0;
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     if(NULL == pref1 && NULL != pref2)
         HGOTO_DONE(1);
@@ -697,11 +857,11 @@ H5P_lacc_elink_pref_cmp(const void *value1, const void *value2, size_t H5_ATTR_U
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P_lacc_elink_pref_cmp() */
+} /* end H5P__lacc_elink_pref_cmp() */
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5P_lacc_elink_pref_close
+ * Function:    H5P__lacc_elink_pref_close
  *
  * Purpose:     Frees memory used to store the external link prefix string
  *
@@ -714,16 +874,16 @@ done:
  */
 /* ARGSUSED */
 static herr_t
-H5P_lacc_elink_pref_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
+H5P__lacc_elink_pref_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size, void *value)
 {
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     HDassert(value);
 
     H5MM_xfree(*(void **)value);
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5P_lacc_elink_pref_close() */
+} /* end H5P__lacc_elink_pref_close() */
 
 
 /*-------------------------------------------------------------------------
@@ -831,7 +991,6 @@ herr_t
 H5Pset_elink_prefix(hid_t plist_id, const char *prefix)
 {
     H5P_genplist_t *plist;              /* Property list pointer */
-    char *my_prefix;                    /* Copy of prefix string */
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_API(FAIL)
@@ -841,19 +1000,8 @@ H5Pset_elink_prefix(hid_t plist_id, const char *prefix)
     if(NULL == (plist = H5P_object_verify(plist_id, H5P_LINK_ACCESS)))
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
-    /* Get current prefix value */
-    if(H5P_get(plist, H5L_ACS_ELINK_PREFIX_NAME, &my_prefix) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get prefix info")
-
-    /* Free existing prefix, if there is one */
-    H5MM_xfree(my_prefix);
-
-    /* Make a copy of the user's prefix string */
-    if(NULL == (my_prefix = H5MM_xstrdup(prefix)))
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy prefix")
-
     /* Set prefix */
-    if(H5P_set(plist, H5L_ACS_ELINK_PREFIX_NAME, &my_prefix) < 0)
+    if(H5P_set(plist, H5L_ACS_ELINK_PREFIX_NAME, &prefix) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set prefix info")
 
 done:
@@ -893,7 +1041,7 @@ H5Pget_elink_prefix(hid_t plist_id, char *prefix, size_t size)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get the current prefix */
-    if(H5P_get(plist, H5L_ACS_ELINK_PREFIX_NAME, &my_prefix) < 0)
+    if(H5P_peek(plist, H5L_ACS_ELINK_PREFIX_NAME, &my_prefix) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get external link prefix")
 
     /* Check for prefix being set */
@@ -931,9 +1079,8 @@ done:
 herr_t
 H5Pset_elink_fapl(hid_t lapl_id, hid_t fapl_id)
 {
-    H5P_genplist_t 	*plist, *fapl_plist;	/* Property list pointer */
-    hid_t		l_fapl_id, new_fapl_id;
-    herr_t 		ret_value = SUCCEED;         		/* Return value */
+    H5P_genplist_t 	*plist;         /* Property list pointer */
+    herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE2("e", "ii", lapl_id, fapl_id);
@@ -942,23 +1089,8 @@ H5Pset_elink_fapl(hid_t lapl_id, hid_t fapl_id)
     if(NULL == (plist = H5P_object_verify(lapl_id, H5P_LINK_ACCESS)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a link access property list");
 
-    /* Get the current file access property list for the link access */
-    if(H5P_get(plist, H5L_ACS_ELINK_FAPL_NAME, &l_fapl_id) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fapl")
-
-    /* Close the current file access property list if set */
-    if((l_fapl_id > H5P_DEFAULT) && (H5I_dec_ref(l_fapl_id) < 0))
-	HGOTO_ERROR(H5E_PLIST, H5E_CANTRELEASE, FAIL, "unable to close atom for file access property list")
-
-    if(NULL == (fapl_plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS)))
-	HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a file access property list");
-
-    /* Make a copy of the property list for FAPL_ID */
-    if((new_fapl_id = H5P_copy_plist(fapl_plist, FALSE)) < 0)
-	HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "unable to copy file access properties")
-
     /* Set the file access property list for the link access */
-    if(H5P_set(plist, H5L_ACS_ELINK_FAPL_NAME, &new_fapl_id) < 0)
+    if(H5P_set(plist, H5L_ACS_ELINK_FAPL_NAME, &fapl_id) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set fapl for link")
 
 done:
@@ -982,9 +1114,8 @@ done:
 hid_t
 H5Pget_elink_fapl(hid_t lapl_id)
 {
-    H5P_genplist_t 	*plist, *fapl_plist; 	/* Property list pointer */
-    hid_t		l_fapl_id;
-    hid_t		ret_value=FAIL;		/* Return value */
+    H5P_genplist_t *plist; 	/* Property list pointer */
+    hid_t ret_value;		/* Return value */
 
     FUNC_ENTER_API(FAIL)
     H5TRACE1("i", "i", lapl_id);
@@ -993,18 +1124,9 @@ H5Pget_elink_fapl(hid_t lapl_id)
     if(NULL == (plist = H5P_object_verify(lapl_id, H5P_LINK_ACCESS)))
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
-    if(H5P_get(plist, H5L_ACS_ELINK_FAPL_NAME, &l_fapl_id) < 0)
+    if(H5P_get(plist, H5L_ACS_ELINK_FAPL_NAME, &ret_value) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get fapl for links")
 
-    if(l_fapl_id > H5P_DEFAULT) {
-	if(NULL==(fapl_plist = H5P_object_verify(l_fapl_id, H5P_FILE_ACCESS)))
-	    HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list");
-
-	if((ret_value = H5P_copy_plist(fapl_plist, TRUE)) < 0)
-	    HGOTO_ERROR(H5E_INTERNAL, H5E_CANTINIT, FAIL, "unable to copy file access properties")
-    } else
-	ret_value = l_fapl_id;
-
 done:
     FUNC_LEAVE_API(ret_value);
 } /* end H5Pget_elink_fapl() */
@@ -1017,7 +1139,7 @@ done:
  *              external link.  This should be either H5F_ACC_RDONLY or
  *              H5F_ACC_RDWR, or H5F_ACC_DEFAULT to unset the value.
  *
- * Return:  Non-negative on success/Negative on failure
+ * Return:      Non-negative on success/Negative on failure
  *
  * Programmer:  Neil Fortner
  *              Tuesday, December 9, 2008
@@ -1056,7 +1178,7 @@ done:
  * Purpose:     Gets the file access flags to be used when traversing an
  *              external link.
  *
- * Return:  Non-negative on success/Negative on failure
+ * Return:      Non-negative on success/Negative on failure
  *
  * Programmer:  Neil Fortner
  *              Tuesday, December 9, 2008
@@ -1077,8 +1199,8 @@ H5Pget_elink_acc_flags(hid_t lapl_id, unsigned *flags)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get flags */
-    if (flags)
-        if(H5P_get(plist, H5L_ACS_ELINK_FLAGS_NAME, flags)<0)
+    if(flags)
+        if(H5P_get(plist, H5L_ACS_ELINK_FLAGS_NAME, flags) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, 0, "can't get access flags")
 
 done:
@@ -1093,7 +1215,7 @@ done:
  *              external link.  This should be either H5F_ACC_RDONLY or
  *              H5F_ACC_RDWR.
  *
- * Return:  Non-negative on success/Negative on failure
+ * Return:      Non-negative on success/Negative on failure
  *
  * Programmer:  Neil Fortner
  *              Tuesday, December 15, 2008
@@ -1138,7 +1260,7 @@ done:
  * Purpose:     Gets the file access flags to be used when traversing an
  *              external link.
  *
- * Return:  Non-negative on success/Negative on failure
+ * Return:      Non-negative on success/Negative on failure
  *
  * Programmer:  Neil Fortner
  *              Tuesday, December 15, 2008
@@ -1160,12 +1282,11 @@ H5Pget_elink_cb(hid_t lapl_id, H5L_elink_traverse_t *func, void **op_data)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get callback_info */
-    if(H5P_get(plist, H5L_ACS_ELINK_CB_NAME, &cb_info)<0)
+    if(H5P_get(plist, H5L_ACS_ELINK_CB_NAME, &cb_info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get callback info")
 
     if(func)
         *func = cb_info.func;
-
     if(op_data)
         *op_data = cb_info.user_data;
 
@@ -1173,4 +1294,3 @@ done:
     FUNC_LEAVE_API(ret_value)
 } /* end H5Pget_elink_cb() */
 
-
diff --git a/src/H5Plcpl.c b/src/H5Plcpl.c
index cde2035..f6e7793 100644
--- a/src/H5Plcpl.c
+++ b/src/H5Plcpl.c
@@ -27,7 +27,8 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
diff --git a/src/H5Pmodule.h b/src/H5Pmodule.h
new file mode 100644
index 0000000..ddf7c0f
--- /dev/null
+++ b/src/H5Pmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5P package.  Including this header means that the source file
+ *		is part of the H5P package.
+ */
+#ifndef _H5Pmodule_H
+#define _H5Pmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5P_MODULE
+#define H5_MY_PKG       H5P
+#define H5_MY_PKG_ERR   H5E_PLIST
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Pmodule_H */
+
diff --git a/src/H5Pocpl.c b/src/H5Pocpl.c
index 2740aad..7ae5a6e 100644
--- a/src/H5Pocpl.c
+++ b/src/H5Pocpl.c
@@ -27,8 +27,9 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -63,9 +64,14 @@
 #define H5O_CRT_OHDR_FLAGS_DEC          H5P__decode_uint8_t
 /* Definitions for filter pipeline */
 #define H5O_CRT_PIPELINE_SIZE sizeof(H5O_pline_t)
+#define H5O_CRT_PIPELINE_SET            H5P__ocrt_pipeline_set
+#define H5O_CRT_PIPELINE_GET            H5P__ocrt_pipeline_get
 #define H5O_CRT_PIPELINE_ENC            H5P__ocrt_pipeline_enc
 #define H5O_CRT_PIPELINE_DEC            H5P__ocrt_pipeline_dec
+#define H5O_CRT_PIPELINE_DEL            H5P__ocrt_pipeline_del
+#define H5O_CRT_PIPELINE_COPY           H5P__ocrt_pipeline_copy
 #define H5O_CRT_PIPELINE_CMP            H5P__ocrt_pipeline_cmp
+#define H5O_CRT_PIPELINE_CLOSE          H5P__ocrt_pipeline_close
 
 
 /******************/
@@ -84,13 +90,16 @@
 
 /* Property class callbacks */
 static herr_t H5P__ocrt_reg_prop(H5P_genclass_t *pclass);
-static herr_t H5P__ocrt_copy(hid_t new_plist_t, hid_t old_plist_t, void *copy_data);
-static herr_t H5P__ocrt_close(hid_t dxpl_id, void *close_data);
 
 /* Property callbacks */
 static herr_t H5P__ocrt_pipeline_enc(const void *value, void **_pp, size_t *size);
 static herr_t H5P__ocrt_pipeline_dec(const void **_pp, void *value);
+static herr_t H5P__ocrt_pipeline_set(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__ocrt_pipeline_get(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__ocrt_pipeline_del(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__ocrt_pipeline_copy(const char *name, size_t size, void *value);
 static int H5P__ocrt_pipeline_cmp(const void *value1, const void *value2, size_t size);
+static herr_t H5P__ocrt_pipeline_close(const char *name, size_t size, void *value);
 
 /* Local routines */
 static herr_t H5P__set_filter(H5P_genplist_t *plist, H5Z_filter_t filter, 
@@ -113,9 +122,9 @@ const H5P_libclass_t H5P_CLS_OCRT[1] = {{
 
     NULL,		        /* Class creation callback      */
     NULL,		        /* Class creation callback info */
-    H5P__ocrt_copy,		/* Class copy callback          */
+    NULL,			/* Class copy callback          */
     NULL,		        /* Class copy callback info     */
-    H5P__ocrt_close,		/* Class close callback         */
+    NULL,			/* Class close callback         */
     NULL 		        /* Class close callback info    */
 }};
 
@@ -177,8 +186,8 @@ H5P__ocrt_reg_prop(H5P_genclass_t *pclass)
 
     /* Register the pipeline property */
     if(H5P_register_real(pclass, H5O_CRT_PIPELINE_NAME, H5O_CRT_PIPELINE_SIZE, &H5O_def_pline_g, 
-            NULL, NULL, NULL, H5O_CRT_PIPELINE_ENC, H5O_CRT_PIPELINE_DEC,
-            NULL, NULL, H5O_CRT_PIPELINE_CMP, NULL) < 0)
+            NULL, H5O_CRT_PIPELINE_SET, H5O_CRT_PIPELINE_GET, H5O_CRT_PIPELINE_ENC, H5O_CRT_PIPELINE_DEC,
+            H5O_CRT_PIPELINE_DEL, H5O_CRT_PIPELINE_COPY, H5O_CRT_PIPELINE_CMP, H5O_CRT_PIPELINE_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
 done:
@@ -187,97 +196,6 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:       H5P__ocrt_copy
- *
- * Purpose:        Callback routine which is called whenever any object
- *                 creation property list is copied.  This routine copies
- *                 the properties from the old list to the new list.
- *
- * Return:         Success:        Non-negative
- *                 Failure:        Negative
- *
- * Programmer:     Neil Fortner
- *                 Monday, September 21, 2009
- *
- *-------------------------------------------------------------------------
- */
-/* ARGSUSED */
-static herr_t
-H5P__ocrt_copy(hid_t dst_plist_id, hid_t src_plist_id, void H5_ATTR_UNUSED *copy_data)
-{
-    H5O_pline_t    src_pline, dst_pline;        /* Source & destination pipelines */
-    H5P_genplist_t *src_plist;                  /* Pointer to source property list */
-    H5P_genplist_t *dst_plist;                  /* Pointer to destination property list */
-    herr_t         ret_value = SUCCEED;         /* Return value */
-
-    FUNC_ENTER_STATIC
-
-    /* Verify property list IDs */
-    if(NULL == (dst_plist = (H5P_genplist_t *)H5I_object(dst_plist_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not an object creation property list")
-    if(NULL == (src_plist = (H5P_genplist_t *)H5I_object(src_plist_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not an object creation property list")
-
-    /* Get the link pipeline property from the old property list */
-    if(H5P_get(src_plist, H5O_CRT_PIPELINE_NAME, &src_pline) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
-
-    /* Make copy of link pipeline */
-    if(NULL == H5O_msg_copy(H5O_PLINE_ID, &src_pline, &dst_pline))
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTINIT, FAIL, "can't copy link pipeline")
-
-    /* Set the link pipeline property for the destination property list */
-    if(H5P_set(dst_plist, H5O_CRT_PIPELINE_NAME, &dst_pline) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set pipeline")
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P__ocrt_copy() */
-
-
-/*-------------------------------------------------------------------------
- * Function:	H5P__ocrt_close
- *
- * Purpose:	Callback routine which is called whenever any object create
- *              property list is closed.  This routine performs any generic
- *              cleanup needed on the properties the library put into the list.
- *
- * Return:	Success:	Non-negative
- *		Failure:	Negative
- *
- * Programmer:     Neil Fortner
- *                 Monday, September 21, 2009
- *
- *-------------------------------------------------------------------------
- */
-/* ARGSUSED */
-static herr_t
-H5P__ocrt_close(hid_t dcpl_id, void H5_ATTR_UNUSED *close_data)
-{
-    H5O_pline_t     pline;              /* I/O pipeline */
-    H5P_genplist_t *plist;              /* Property list */
-    herr_t ret_value = SUCCEED;         /* Return value */
-
-    FUNC_ENTER_STATIC
-
-    /* Check arguments */
-    if(NULL == (plist = (H5P_genplist_t *)H5I_object(dcpl_id)))
-        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not an object creation property list")
-
-    /* Get the link pipeline property from the old property list */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
-
-    /* Clean up any values set for the link pipeline */
-    if(H5O_msg_reset(H5O_PLINE_ID, &pline) < 0)
-        HGOTO_ERROR(H5E_PLIST, H5E_CANTFREE, FAIL, "can't release pipeline info")
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5P__ocrt_close() */
-
-
-/*-------------------------------------------------------------------------
  * Function:	H5Pset_attr_phase_change
  *
  * Purpose:	Sets the cutoff values for indexes storing attributes
@@ -615,7 +533,7 @@ H5P_modify_filter(H5P_genplist_t *plist, H5Z_filter_t filter, unsigned flags,
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Get the pipeline property to modify */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
 
     /* Modify the filter parameters of the I/O pipeline */
@@ -623,7 +541,7 @@ H5P_modify_filter(H5P_genplist_t *plist, H5Z_filter_t filter, unsigned flags,
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to add filter to pipeline")
 
     /* Put the I/O pipeline information back into the property list */
-    if(H5P_set(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_poke(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set pipeline")
 
 done:
@@ -841,7 +759,7 @@ H5P__set_filter(H5P_genplist_t *plist, H5Z_filter_t filter, unsigned int flags,
     } /* end if */
 
     /* Get the pipeline property to append to */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
 
     /* Add the filter to the I/O pipeline */
@@ -849,7 +767,7 @@ H5P__set_filter(H5P_genplist_t *plist, H5Z_filter_t filter, unsigned int flags,
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to add filter to pipeline")
 
     /* Put the I/O pipeline information back into the property list */
-    if(H5P_set(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_poke(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set pipeline")
 
 done:
@@ -899,7 +817,7 @@ H5Pget_nfilters(hid_t plist_id)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get the pipeline property to query */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
 
     /* Set return value */
@@ -982,7 +900,7 @@ H5Pget_filter2(hid_t plist_id, unsigned idx, unsigned int *flags/*out*/,
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, H5Z_FILTER_ERROR, "can't find object for ID")
 
     /* Get the pipeline property to query */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, H5Z_FILTER_ERROR, "can't get pipeline")
 
     /* Check index */
@@ -1038,7 +956,7 @@ H5P_get_filter_by_id(H5P_genplist_t *plist, H5Z_filter_t id, unsigned int *flags
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Get pipeline info */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
 
     /* Get pointer to filter in pipeline */
@@ -1167,7 +1085,7 @@ H5Pall_filters_avail(hid_t plist_id)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get the pipeline property to query */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
 
     /* Check if all filters are available */
@@ -1203,7 +1121,7 @@ H5P_filter_in_pline(H5P_genplist_t *plist, H5Z_filter_t id)
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Get pipeline info */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
 
     /* Check if the file is in the pipeline */
@@ -1250,7 +1168,7 @@ H5Premove_filter(hid_t plist_id, H5Z_filter_t filter)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get the pipeline property to modify */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
 
     /* Check if there are any filters */
@@ -1260,7 +1178,7 @@ H5Premove_filter(hid_t plist_id, H5Z_filter_t filter)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't delete filter")
 
         /* Put the I/O pipeline information back into the property list */
-        if(H5P_set(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+        if(H5P_poke(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set pipeline")
     } /* end if */
 
@@ -1318,7 +1236,7 @@ H5Pset_deflate(hid_t plist_id, unsigned level)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get the pipeline property to append to */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
 
     /* Add the filter */
@@ -1326,7 +1244,7 @@ H5Pset_deflate(hid_t plist_id, unsigned level)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to add deflate filter to pipeline")
 
     /* Put the I/O pipeline information back into the property list */
-    if(H5P_set(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_poke(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set pipeline")
 
 done:
@@ -1369,7 +1287,7 @@ H5Pset_fletcher32(hid_t plist_id)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get the pipeline property to append to */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get pipeline")
 
     /* Add the Fletcher32 checksum as a filter */
@@ -1377,7 +1295,7 @@ H5Pset_fletcher32(hid_t plist_id)
         HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to add fletcher32 filter to pipeline")
 
     /* Put the I/O pipeline information back into the property list */
-    if(H5P_set(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_poke(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set pipeline")
 
 done:
@@ -1462,6 +1380,82 @@ H5P_get_filter(const H5Z_filter_info_t *filter, unsigned int *flags/*out*/,
 
 
 /*-------------------------------------------------------------------------
+ * Function:    H5P__ocrt_pipeline_set
+ *
+ * Purpose:     Copies an I/O pipeline property when it's set for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Thursday, Sept 3, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__ocrt_pipeline_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    H5O_pline_t     *pline = (H5O_pline_t *)value; /* Create local aliases for values */
+    H5O_pline_t     new_pline;
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of I/O pipeline */
+    if(NULL == H5O_msg_copy(H5O_PLINE_ID, pline, &new_pline))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy I/O pipeline")
+
+    /* Copy new I/O pipeline message over old one */
+    *pline = new_pline;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__ocrt_pipeline_set() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__ocrt_pipeline_get
+ *
+ * Purpose:     Copies a layout property when it's retrieved from a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Tuesday, Sept 1, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__ocrt_pipeline_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    H5O_pline_t     *pline = (H5O_pline_t *)value; /* Create local aliases for values */
+    H5O_pline_t     new_pline;
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of I/O pipeline */
+    if(NULL == H5O_msg_copy(H5O_PLINE_ID, pline, &new_pline))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy I/O pipeline")
+
+    /* Copy new I/O pipeline message over old one */
+    *pline = new_pline;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__ocrt_pipeline_get() */
+
+
+/*-------------------------------------------------------------------------
  * Function:       H5P__ocrt_pipeline_enc
  *
  * Purpose:        Callback routine which is called whenever the pipeline
@@ -1639,6 +1633,9 @@ H5P__ocrt_pipeline_dec(const void **_pp, void *_value)
         /* Add the filter to the I/O pipeline */
         if(H5Z_append(pline, filter.id, filter.flags, filter.cd_nelmts, filter.cd_values) < 0)
             HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to add filter to pipeline")
+
+        /* Free cd_values, if it was allocated */
+        filter.cd_values = (unsigned *)H5MM_xfree(filter.cd_values);
     } /* end for */
 
 done: 
@@ -1647,6 +1644,77 @@ done:
 
 
 /*-------------------------------------------------------------------------
+ * Function:    H5P__ocrt_pipeline_del
+ *
+ * Purpose:     Frees memory used to store the I/O pipeline property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Thursday, Sept 3, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__ocrt_pipeline_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Reset the old I/O pipeline */
+    if(H5O_msg_reset(H5O_PLINE_ID, value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRESET, FAIL, "can't release I/O pipeline message")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__ocrt_pipeline_del() */
+
+
+/*--------------------------------------------------------------------------
+ * Function:    H5P__ocrt_pipeline_copy
+ *
+ * Purpose:     Copy the I/O pipeline property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Thursday, Sept 3, 2015
+ *
+ *--------------------------------------------------------------------------
+ */
+static herr_t
+H5P__ocrt_pipeline_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
+    void *value)
+{
+    H5O_pline_t     *pline = (H5O_pline_t *)value; /* Create local aliases for values */
+    H5O_pline_t     new_pline;
+    herr_t          ret_value = SUCCEED;
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(pline);
+
+    /* Make copy of I/O pipeline */
+    if(NULL == H5O_msg_copy(H5O_PLINE_ID, pline, &new_pline))
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy I/O pipeline")
+
+    /* Copy new I/O pipeline message over old one */
+    *pline = new_pline;
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__ocrt_pipeline_copy() */
+
+
+/*-------------------------------------------------------------------------
  * Function:       H5P__ocrt_pipeline_cmp
  *
  * Purpose:        Callback routine which is called whenever a filter pipeline
@@ -1727,6 +1795,39 @@ done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5P__ocrt_pipeline_cmp() */
 
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__ocrt_pipeline_close
+ *
+ * Purpose:     Frees memory used to store the I/O pipeline property
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Thursday, Sept 3, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__ocrt_pipeline_close(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
+    void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Reset the old I/O pipeline */
+    if(H5O_msg_reset(H5O_PLINE_ID, value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTRESET, FAIL, "can't release I/O pipeline message")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__ocrt_pipeline_close() */
+
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 
 /*-------------------------------------------------------------------------
@@ -1792,7 +1893,7 @@ H5Pget_filter1(hid_t plist_id, unsigned idx, unsigned int *flags/*out*/,
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, H5Z_FILTER_ERROR, "can't find object for ID")
 
     /* Get pipeline info */
-    if(H5P_get(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
+    if(H5P_peek(plist, H5O_CRT_PIPELINE_NAME, &pline) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, H5Z_FILTER_ERROR, "can't get pipeline")
 
     /* Check more args */
diff --git a/src/H5Pocpypl.c b/src/H5Pocpypl.c
index 45ba778..7657d52 100644
--- a/src/H5Pocpypl.c
+++ b/src/H5Pocpypl.c
@@ -27,7 +27,8 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 
 
 /***********/
@@ -53,10 +54,13 @@
 #define H5O_CPY_OPTION_ENC			H5P__encode_unsigned
 #define H5O_CPY_OPTION_DEC			H5P__decode_unsigned
 /* Definitions for merge committed dtype list */
-#define H5O_CPY_MERGE_COMM_DT_LIST_SIZE        sizeof(char *)
+#define H5O_CPY_MERGE_COMM_DT_LIST_SIZE        sizeof(H5O_copy_dtype_merge_list_t *)
 #define H5O_CPY_MERGE_COMM_DT_LIST_DEF         NULL
+#define H5O_CPY_MERGE_COMM_DT_LIST_SET         H5P__ocpy_merge_comm_dt_list_set
+#define H5O_CPY_MERGE_COMM_DT_LIST_GET         H5P__ocpy_merge_comm_dt_list_get
 #define H5O_CPY_MERGE_COMM_DT_LIST_ENC         H5P__ocpy_merge_comm_dt_list_enc
 #define H5O_CPY_MERGE_COMM_DT_LIST_DEC         H5P__ocpy_merge_comm_dt_list_dec
+#define H5O_CPY_MERGE_COMM_DT_LIST_DEL         H5P__ocpy_merge_comm_dt_list_del
 #define H5O_CPY_MERGE_COMM_DT_LIST_COPY        H5P__ocpy_merge_comm_dt_list_copy
 #define H5O_CPY_MERGE_COMM_DT_LIST_CMP         H5P__ocpy_merge_comm_dt_list_cmp
 #define H5O_CPY_MERGE_COMM_DT_LIST_CLOSE       H5P__ocpy_merge_comm_dt_list_close
@@ -81,13 +85,17 @@
 
 /* General routines */
 static H5O_copy_dtype_merge_list_t *H5P__free_merge_comm_dtype_list(H5O_copy_dtype_merge_list_t *dt_list);
+static herr_t H5P__copy_merge_comm_dt_list(H5O_copy_dtype_merge_list_t **value);
 
 /* Property class callbacks */
 static herr_t H5P__ocpy_reg_prop(H5P_genclass_t *pclass);
 
 /* Property callbacks */
+static herr_t H5P__ocpy_merge_comm_dt_list_set(hid_t prop_id, const char *name, size_t size, void *value);
+static herr_t H5P__ocpy_merge_comm_dt_list_get(hid_t prop_id, const char *name, size_t size, void *value);
 static herr_t H5P__ocpy_merge_comm_dt_list_enc(const void *value, void **_pp, size_t *size);
 static herr_t H5P__ocpy_merge_comm_dt_list_dec(const void **_pp, void *value);
+static herr_t H5P__ocpy_merge_comm_dt_list_del(hid_t prop_id, const char *name, size_t size, void *value);
 static herr_t H5P__ocpy_merge_comm_dt_list_copy(const char* name, size_t size, void* value);
 static int H5P__ocpy_merge_comm_dt_list_cmp(const void *value1, const void *value2, size_t size);
 static herr_t H5P__ocpy_merge_comm_dt_list_close(const char* name, size_t size, void* value);
@@ -162,8 +170,8 @@ H5P__ocpy_reg_prop(H5P_genclass_t *pclass)
 
     /* Register merge named dtype list property */
     if(H5P_register_real(pclass, H5O_CPY_MERGE_COMM_DT_LIST_NAME, H5O_CPY_MERGE_COMM_DT_LIST_SIZE, &H5O_def_merge_comm_dtype_list_g, 
-            NULL, NULL, NULL, H5O_CPY_MERGE_COMM_DT_LIST_ENC, H5O_CPY_MERGE_COMM_DT_LIST_DEC,
-            NULL, H5O_CPY_MERGE_COMM_DT_LIST_COPY, H5O_CPY_MERGE_COMM_DT_LIST_CMP, H5O_CPY_MERGE_COMM_DT_LIST_CLOSE) < 0)
+            NULL, H5O_CPY_MERGE_COMM_DT_LIST_SET, H5O_CPY_MERGE_COMM_DT_LIST_GET, H5O_CPY_MERGE_COMM_DT_LIST_ENC, H5O_CPY_MERGE_COMM_DT_LIST_DEC,
+            H5O_CPY_MERGE_COMM_DT_LIST_DEL, H5O_CPY_MERGE_COMM_DT_LIST_COPY, H5O_CPY_MERGE_COMM_DT_LIST_CMP, H5O_CPY_MERGE_COMM_DT_LIST_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register property for callback when completing the search for a matching named datatype from the named dtype list */
@@ -186,20 +194,23 @@ done:
  *
  * Programmer:  Neil Fortner
  *              October 27, 2011
+ *
  *-------------------------------------------------------------------------
  */
 static H5O_copy_dtype_merge_list_t *
 H5P__free_merge_comm_dtype_list(H5O_copy_dtype_merge_list_t *dt_list)
 {
-    H5O_copy_dtype_merge_list_t *tmp_node;
-
     FUNC_ENTER_STATIC_NOERR
 
     /* Free the list */
     while(dt_list) {
+        H5O_copy_dtype_merge_list_t *tmp_node;
+
         tmp_node = dt_list->next;
+
         (void)H5MM_xfree(dt_list->path);
         (void)H5FL_FREE(H5O_copy_dtype_merge_list_t, dt_list);
+
         dt_list = tmp_node;
     } /* end while */
 
@@ -207,6 +218,138 @@ H5P__free_merge_comm_dtype_list(H5O_copy_dtype_merge_list_t *dt_list)
 } /* H5P__free_merge_comm_dtype_list */
 
 
+/*--------------------------------------------------------------------------
+ * Function:	H5P__copy_merge_comm_dt_list
+ *
+ * Purpose:	Copy a merge committed datatype list
+ *
+ * Return:	Success:	Non-negative
+ * 		Failure:	Negative
+ *
+ * Programmer:	Quincey Koziol
+ *		Wednesday, September 2, 2015
+ *
+ *--------------------------------------------------------------------------
+ */
+static herr_t
+H5P__copy_merge_comm_dt_list(H5O_copy_dtype_merge_list_t **value)
+{
+    const H5O_copy_dtype_merge_list_t *src_dt_list;     /* Source merge named datatype lists */
+    H5O_copy_dtype_merge_list_t *dst_dt_list = NULL;    /* Destination merge named datatype lists */
+    H5O_copy_dtype_merge_list_t *dst_dt_list_tail = NULL, *tmp_dt_list = NULL; /* temporary merge named datatype lists */
+    herr_t         ret_value = SUCCEED;
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of merge committed dtype list */
+    src_dt_list = *value;
+    while(src_dt_list) {
+        /* Copy src_dt_list */
+        if(NULL == (tmp_dt_list = H5FL_CALLOC(H5O_copy_dtype_merge_list_t)))
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "memory allocation failed")
+        if(NULL == (tmp_dt_list->path = H5MM_strdup(src_dt_list->path)))
+            HGOTO_ERROR(H5E_PLIST, H5E_CANTALLOC, FAIL, "memory allocation failed")
+
+        /* Add copied node to dest dtype list */
+        if(dst_dt_list_tail) {
+            dst_dt_list_tail->next = tmp_dt_list;
+            dst_dt_list_tail = tmp_dt_list;
+        } /* end if */
+        else {
+            dst_dt_list = tmp_dt_list;
+            dst_dt_list_tail = tmp_dt_list;
+        } /* end else */
+        tmp_dt_list = NULL;
+
+        /* Advance src_dt_list pointer */
+        src_dt_list = src_dt_list->next;
+    } /* end while */
+
+    /* Set the merge named dtype list property for the destination property list */
+    *value = dst_dt_list;
+
+done:
+    if(ret_value < 0) {
+        dst_dt_list = H5P__free_merge_comm_dtype_list(dst_dt_list);
+        if(tmp_dt_list) {
+            tmp_dt_list->path = (char *)H5MM_xfree(tmp_dt_list->path);
+            tmp_dt_list = H5FL_FREE(H5O_copy_dtype_merge_list_t, tmp_dt_list);
+        } /* end if */
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__copy_merge_comm_dt_list() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__ocpy_merge_comm_dt_list_set
+ *
+ * Purpose:     Copies a merge committed datatype list property when it's set for a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Wednesday, Sept 2, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__ocpy_merge_comm_dt_list_set(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of merge committed dtype list */
+    if(H5P__copy_merge_comm_dt_list((H5O_copy_dtype_merge_list_t **)value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy merge committed dtype list")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__ocpy_merge_comm_dt_list_set() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    H5P__ocpy_merge_comm_dt_list_get
+ *
+ * Purpose:     Copies a merge committed datatype list property when it's retrieved from a property list
+ *
+ * Return:      Success:        Non-negative
+ *              Failure:        Negative
+ *
+ * Programmer:  Quincey Koziol
+ *              Wednesday, Sept 2, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5P__ocpy_merge_comm_dt_list_get(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    herr_t ret_value = SUCCEED;         /* Return value */
+
+    FUNC_ENTER_STATIC
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Make copy of merge committed dtype list */
+    if(H5P__copy_merge_comm_dt_list((H5O_copy_dtype_merge_list_t **)value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy merge committed dtype list")
+
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
+} /* end H5P__ocpy_merge_comm_dt_list_get() */
+
+
 /*-------------------------------------------------------------------------
  * Function:       H5P__ocpy_merge_comm_dt_list_enc
  *
@@ -295,6 +438,9 @@ H5P__ocpy_merge_comm_dt_list_dec(const void **_pp, void *_value)
     HDassert(pp);
     HDassert(*pp);
     HDassert(dt_list);
+
+    /* Start off with NULL (default value) */
+    *dt_list = NULL;
     
     /* Decode the string sequence */
     len = HDstrlen(*(const char **)pp);
@@ -339,6 +485,36 @@ done:
 
 
 /*--------------------------------------------------------------------------
+ * Function:	H5P__ocpy_merge_comm_dt_list_del
+ *
+ * Purpose:     Frees memory used to store the merge committed datatype list property
+ *
+ * Return:	Success:	Non-negative
+ * 		Failure:	Negative
+ *
+ * Programmer:	Quincey Koziol
+ *		Wednesday, September 2, 2015
+ *
+ *--------------------------------------------------------------------------
+ */
+/* ARGSUSED */
+static herr_t
+H5P__ocpy_merge_comm_dt_list_del(hid_t H5_ATTR_UNUSED prop_id, const char H5_ATTR_UNUSED *name,
+    size_t H5_ATTR_UNUSED size, void *value)
+{
+    FUNC_ENTER_STATIC_NOERR
+
+    /* Sanity check */
+    HDassert(value);
+
+    /* Free the merge named dtype list */
+    H5P__free_merge_comm_dtype_list(*(H5O_copy_dtype_merge_list_t **)value);
+
+    FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5P__ocpy_merge_comm_dt_list_del() */
+
+
+/*--------------------------------------------------------------------------
  * Function:	H5P__ocpy_merge_comm_dt_list_copy
  *
  * Purpose:	Copy the merge committed datatype list
@@ -356,51 +532,18 @@ static herr_t
 H5P__ocpy_merge_comm_dt_list_copy(const char H5_ATTR_UNUSED *name, size_t H5_ATTR_UNUSED size,
     void *value)
 {
-    const H5O_copy_dtype_merge_list_t *src_dt_list;     /* Source merge named datatype lists */
-    H5O_copy_dtype_merge_list_t *dst_dt_list = NULL;    /* Destination merge named datatype lists */
-    H5O_copy_dtype_merge_list_t *dst_dt_list_tail = NULL, *tmp_dt_list = NULL; /* temporary merge named datatype lists */
     herr_t         ret_value = SUCCEED;
 
     FUNC_ENTER_STATIC
 
+    /* Sanity check */
     HDassert(value);
 
     /* Make copy of merge committed dtype list */
-    src_dt_list = *(const H5O_copy_dtype_merge_list_t **)value;
-    while(src_dt_list) {
-        /* Copy src_dt_list */
-        if(NULL == (tmp_dt_list = H5FL_CALLOC(H5O_copy_dtype_merge_list_t)))
-            HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed")
-        if(NULL == (tmp_dt_list->path = H5MM_strdup(src_dt_list->path)))
-            HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed")
-
-        /* Add copied node to dest dtype list */
-        if(dst_dt_list_tail) {
-            dst_dt_list_tail->next = tmp_dt_list;
-            dst_dt_list_tail = tmp_dt_list;
-        } /* end if */
-        else {
-            dst_dt_list = tmp_dt_list;
-            dst_dt_list_tail = tmp_dt_list;
-        } /* end else */
-        tmp_dt_list = NULL;
-
-        /* Advance src_dt_list pointer */
-        src_dt_list = src_dt_list->next;
-    } /* end while */
-
-    /* Set the merge named dtype list property for the destination property list */
-    *(H5O_copy_dtype_merge_list_t **)value = dst_dt_list;
+    if(H5P__copy_merge_comm_dt_list((H5O_copy_dtype_merge_list_t **)value) < 0)
+        HGOTO_ERROR(H5E_PLIST, H5E_CANTCOPY, FAIL, "can't copy merge committed dtype list")
 
 done:
-    if(ret_value < 0) {
-        dst_dt_list = H5P__free_merge_comm_dtype_list(dst_dt_list);
-        if(tmp_dt_list) {
-            tmp_dt_list->path = (char *)H5MM_xfree(tmp_dt_list->path);
-            tmp_dt_list = H5FL_FREE(H5O_copy_dtype_merge_list_t, tmp_dt_list);
-        } /* end if */
-    } /* end if */
-
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5P__ocpy_merge_comm_dt_list_copy() */
 
@@ -439,6 +582,9 @@ H5P__ocpy_merge_comm_dt_list_cmp(const void *_dt_list1, const void *_dt_list2,
     /* Walk through the lists, comparing each path.  For the lists to be the
      * same, the paths must be in the same order. */
     while(dt_list1 && dt_list2) {
+        HDassert(dt_list1->path);
+        HDassert(dt_list2->path);
+
         /* Compare paths */
         ret_value = HDstrcmp(dt_list1->path, dt_list2->path);
         if(ret_value != 0) HGOTO_DONE(ret_value)
@@ -601,13 +747,15 @@ H5Padd_merge_committed_dtype_path(hid_t plist_id, const char *path)
     /* Check parameters */
     if(!path)
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no path specified")
+    if(path[0] == '\0')
+        HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "path is empty string")
 
     /* Get the plist structure */
     if(NULL == (plist = H5P_object_verify(plist_id, H5P_OBJECT_COPY)))
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get dtype list */
-    if(H5P_get(plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &old_list) < 0)
+    if(H5P_peek(plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &old_list) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get merge named dtype list")
 
     /* Add the new path to the list */
@@ -618,7 +766,7 @@ H5Padd_merge_committed_dtype_path(hid_t plist_id, const char *path)
     new_obj->next = old_list;
 
     /* Update the list stored in the property list */
-    if(H5P_set(plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &new_obj) < 0)
+    if(H5P_poke(plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &new_obj) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set merge named dtype list")
 
 done:
@@ -663,14 +811,14 @@ H5Pfree_merge_committed_dtype_paths(hid_t plist_id)
         HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find object for ID")
 
     /* Get dtype list */
-    if(H5P_get(plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &dt_list) < 0)
+    if(H5P_peek(plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &dt_list) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get merge committed dtype list")
 
     /* Free dtype list */
     dt_list = H5P__free_merge_comm_dtype_list(dt_list);
 
     /* Update the list stored in the property list (to NULL) */
-    if(H5P_set(plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &dt_list) < 0)
+    if(H5P_poke(plist, H5O_CPY_MERGE_COMM_DT_LIST_NAME, &dt_list) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set merge committed dtype list")
 
 done:
diff --git a/src/H5Ppkg.h b/src/H5Ppkg.h
index 2942a4d..105baf7 100644
--- a/src/H5Ppkg.h
+++ b/src/H5Ppkg.h
@@ -21,7 +21,7 @@
  *		the H5P package.  Source files outside the H5P package should
  *		include H5Pprivate.h instead.
  */
-#ifndef H5P_PACKAGE
+#if !(defined H5P_FRIEND || defined H5P_MODULE)
 #error "Do not include this file outside the H5P package!"
 #endif
 
@@ -158,8 +158,6 @@ struct H5Z_filter_info_t;
 /******************************/
 
 /* Private functions, not part of the publicly documented API */
-H5_DLL herr_t H5P__term_pub_interface(void);
-H5_DLL herr_t H5P__term_deprec_interface(void);
 H5_DLL H5P_genclass_t *H5P_create_class(H5P_genclass_t *par_class,
     const char *name, H5P_plist_type_t type,
     H5P_cls_create_func_t cls_create, void *create_data,
diff --git a/src/H5Pprivate.h b/src/H5Pprivate.h
index 7233818..05830d1 100644
--- a/src/H5Pprivate.h
+++ b/src/H5Pprivate.h
@@ -33,13 +33,13 @@
 #define H5P_STRCRT_CHAR_ENCODING_NAME  "character_encoding"     /* Character set encoding for string */
 
 /* If the module using this macro is allowed access to the private variables, access them directly */
-#ifdef H5P_PACKAGE
+#ifdef H5P_MODULE
 #define H5P_PLIST_ID(P)     ((P)->plist_id)
 #define H5P_CLASS(P)        ((P)->pclass)
-#else /* H5F_PACKAGE */
+#else /* H5P_MODULE */
 #define H5P_PLIST_ID(P)     (H5P_get_plist_id(P))
 #define H5P_CLASS(P)        (H5P_get_class(P))
-#endif /* H5P_PACKAGE */
+#endif /* H5P_MODULE */
 
 
 /****************************/
@@ -111,21 +111,23 @@ H5_DLL herr_t H5P_init(void);
 H5_DLL herr_t H5P_close(void *_plist);
 H5_DLL hid_t H5P_create_id(H5P_genclass_t *pclass, hbool_t app_ref);
 H5_DLL hid_t H5P_copy_plist(const H5P_genplist_t *old_plist, hbool_t app_ref);
-H5_DLL herr_t H5P_get(const H5P_genplist_t *plist, const char *name, void *value);
+H5_DLL herr_t H5P_get(H5P_genplist_t *plist, const char *name, void *value);
 H5_DLL herr_t H5P_set(H5P_genplist_t *plist, const char *name, const void *value);
+H5_DLL herr_t H5P_peek(H5P_genplist_t *plist, const char *name, void *value);
+H5_DLL herr_t H5P_poke(H5P_genplist_t *plist, const char *name, const void *value);
 H5_DLL herr_t H5P_insert(H5P_genplist_t *plist, const char *name, size_t size,
     void *value, H5P_prp_set_func_t prp_set, H5P_prp_get_func_t prp_get,
     H5P_prp_encode_func_t prp_encode, H5P_prp_decode_func_t prp_decode,
     H5P_prp_delete_func_t prp_delete, H5P_prp_copy_func_t prp_copy,
     H5P_prp_compare_func_t prp_cmp, H5P_prp_close_func_t prp_close);
-H5_DLL herr_t H5P_remove(hid_t plist_id, H5P_genplist_t *plist, const char *name);
+H5_DLL herr_t H5P_remove(H5P_genplist_t *plist, const char *name);
 H5_DLL htri_t H5P_exist_plist(const H5P_genplist_t *plist, const char *name);
 H5_DLL htri_t H5P_class_isa(const H5P_genclass_t *pclass1, const H5P_genclass_t *pclass2);
 H5_DLL char *H5P_get_class_name(H5P_genclass_t *pclass);
 H5_DLL herr_t H5P_get_nprops_pclass(const H5P_genclass_t *pclass, size_t *nprops,
     hbool_t recurse);
-H5_DLL hid_t H5P_get_driver(H5P_genplist_t *plist);
-H5_DLL void * H5P_get_driver_info(H5P_genplist_t *plist);
+H5_DLL hid_t H5P_peek_driver(H5P_genplist_t *plist);
+H5_DLL const void *H5P_peek_driver_info(H5P_genplist_t *plist);
 H5_DLL herr_t H5P_set_driver(H5P_genplist_t *plist, hid_t new_driver_id,
             const void *new_driver_info);
 H5_DLL herr_t H5P_set_vlen_mem_manager(H5P_genplist_t *plist,
diff --git a/src/H5Pstrcpl.c b/src/H5Pstrcpl.c
index 3ba625e..5a09cd7 100644
--- a/src/H5Pstrcpl.c
+++ b/src/H5Pstrcpl.c
@@ -27,7 +27,9 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
+
 
 /***********/
 /* Headers */
diff --git a/src/H5Ptest.c b/src/H5Ptest.c
index b36da6a..30a98a4 100644
--- a/src/H5Ptest.c
+++ b/src/H5Ptest.c
@@ -19,7 +19,7 @@
  * Purpose:	Generic Property Testing Functions
  */
 
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+#include "H5Pmodule.h"          /* This source code file is part of the H5P module */
 #define H5P_TESTING		/*suppress warning about H5P testing funcs*/
 
 
@@ -60,8 +60,8 @@
 char *
 H5P_get_class_path_test(hid_t pclass_id)
 {
-    H5P_genclass_t	*pclass;    /* Property class to query */
-    char *ret_value;       /* return value */
+    H5P_genclass_t	*pclass;        /* Property class to query */
+    char *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -101,8 +101,8 @@ done:
 hid_t
 H5P_open_class_path_test(const char *path)
 {
-    H5P_genclass_t *pclass=NULL;/* Property class to query */
-    hid_t ret_value;            /* Return value */
+    H5P_genclass_t *pclass = NULL;      /* Property class to query */
+    hid_t ret_value = H5I_INVALID_HID;  /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -156,7 +156,7 @@ H5P_reset_external_file_test(hid_t dcpl_id)
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset creation property list")
 
     /* get external file list */
-    if(H5P_get(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
+    if(H5P_peek(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get external file list")
 
     /* Clean up any values set for the external file-list */
@@ -164,7 +164,7 @@ H5P_reset_external_file_test(hid_t dcpl_id)
         HGOTO_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "can't release external file list info")
 
     /* set external file list */
-    if(H5P_set(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
+    if(H5P_poke(plist, H5D_CRT_EXT_FILE_LIST_NAME, &efl) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get external file list")
 
 done:
diff --git a/src/H5R.c b/src/H5R.c
index d96f5e6..61b45e1 100644
--- a/src/H5R.c
+++ b/src/H5R.c
@@ -17,10 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5R_PACKAGE		/*suppress error about including H5Rpkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5R_init_interface
+#include "H5Rmodule.h"          /* This source code file is part of the H5R module */
 
 
 /***********/
@@ -63,6 +60,9 @@ static ssize_t H5R_get_name(H5F_t *file, hid_t lapl_id, hid_t dxpl_id, hid_t id,
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -81,39 +81,16 @@ static const H5I_class_t H5I_REFERENCE_CLS[1] = {{
     NULL			/* Callback routine for closing objects of this class */
 }};
 
+/* Flag indicating "top" of interface has been initialized */
+static hbool_t H5R_top_package_initialize_s = FALSE;
 
-
-/*-------------------------------------------------------------------------
- * Function:	H5R_init
- *
- * Purpose:	Initialize the interface from some other package.
- *
- * Return:	Success:	non-negative
- *		Failure:	negative
- *
- * Programmer:	Quincey Koziol
- *              Thursday, September 13, 2007
- *
- *-------------------------------------------------------------------------
- */
-herr_t
-H5R_init(void)
-{
-    herr_t ret_value = SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI(FAIL)
-    /* FUNC_ENTER() does all the work */
-
-done:
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5R_init() */
 
 
 /*--------------------------------------------------------------------------
 NAME
-   H5R_init_interface -- Initialize interface-specific information
+   H5R__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5R_init_interface()
+    herr_t H5R__init_package()
 
 RETURNS
     Non-negative on success/Negative on failure
@@ -121,33 +98,37 @@ DESCRIPTION
     Initializes any interface-specific data or routines.
 
 --------------------------------------------------------------------------*/
-static herr_t
-H5R_init_interface(void)
+herr_t
+H5R__init_package(void)
 {
-    herr_t      ret_value=SUCCEED;       /* Return value */
+    herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
     /* Initialize the atom group for the file IDs */
     if(H5I_register_type(H5I_REFERENCE_CLS) < 0)
-	HGOTO_ERROR(H5E_REFERENCE, H5E_CANTINIT, FAIL, "unable to initialize interface");
+	HGOTO_ERROR(H5E_REFERENCE, H5E_CANTINIT, FAIL, "unable to initialize interface")
+
+    /* Mark "top" of interface as initialized, too */
+    H5R_top_package_initialize_s = TRUE;
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}
+} /* end H5R__init_package() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5R_term_interface
+    H5R_top_term_package
  PURPOSE
     Terminate various H5R objects
  USAGE
-    void H5R_term_interface()
+    void H5R_top_term_package()
  RETURNS
     void
  DESCRIPTION
-    Release the atom group and any other resources allocated.
+    Release IDs for the atom group, deferring full interface shutdown
+    until later (in H5R_term_package).
  GLOBAL VARIABLES
  COMMENTS, BUGS, ASSUMPTIONS
      Can't report errors...
@@ -155,32 +136,69 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 int
-H5R_term_interface(void)
+H5R_top_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if (H5_interface_initialize_g) {
+    if(H5R_top_package_initialize_s) {
 	if(H5I_nmembers(H5I_REFERENCE) > 0) {
 	    (void)H5I_clear_type(H5I_REFERENCE, FALSE, FALSE);
             n++; /*H5I*/
 	} /* end if */
-        else {
-            /* Close deprecated interface */
-            n += H5R__term_deprec_interface();
 
-            /* Destroy the reference id group */
-	    (void)H5I_dec_type_ref(H5I_REFERENCE);
-            n++; /*H5I*/
+        /* Mark closed */
+        if(0 == n)
+            H5R_top_package_initialize_s = FALSE;
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(n)
+} /* end H5R_top_term_package() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5R_term_package
+ PURPOSE
+    Terminate various H5R objects
+ USAGE
+    void H5R_term_package()
+ RETURNS
+    void
+ DESCRIPTION
+    Release the atom group and any other resources allocated.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+     Can't report errors...
+
+     Finishes shutting down the interface, after H5R_top_term_package()
+     is called
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+int
+H5R_term_package(void)
+{
+    int	n = 0;
+
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+    if(H5_PKG_INIT_VAR) {
+        /* Sanity checks */
+        HDassert(0 == H5I_nmembers(H5I_REFERENCE));
+        HDassert(FALSE == H5R_top_package_initialize_s);
+
+        /* Destroy the reference id group */
+        n += (H5I_dec_type_ref(H5I_REFERENCE) > 0);
 
-            /* Mark closed */
-	    H5_interface_initialize_g = 0;
-	} /* end else */
+        /* Mark closed */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5R_term_interface() */
+} /* end H5R_term_package() */
 
 
 /*--------------------------------------------------------------------------
@@ -424,7 +442,7 @@ H5R_dereference(H5F_t *file, hid_t oapl_id, hid_t dxpl_id, H5R_type_t ref_type,
     H5G_loc_t loc;              /* Group location */
     unsigned rc;		/* Reference count of object */
     H5O_type_t obj_type;        /* Type of object */
-    hid_t ret_value;            /* Return value */
+    hid_t ret_value = H5I_INVALID_HID;  /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -902,9 +920,9 @@ static ssize_t
 H5R_get_name(H5F_t *f, hid_t lapl_id, hid_t dxpl_id, hid_t id, H5R_type_t ref_type,
     const void *_ref, char *name, size_t size)
 {
-    hid_t file_id = (-1);       /* ID for file that the reference is in */
+    hid_t file_id = H5I_INVALID_HID;    /* ID for file that the reference is in */
     H5O_loc_t oloc;             /* Object location describing object for reference */
-    ssize_t ret_value;          /* Return value */
+    ssize_t ret_value = -1;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Rdeprec.c b/src/H5Rdeprec.c
index 9877f42..b8133b2 100644
--- a/src/H5Rdeprec.c
+++ b/src/H5Rdeprec.c
@@ -31,10 +31,7 @@
 /* Module Setup */
 /****************/
 
-#define H5R_PACKAGE		/*suppress error about including H5Rpkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5R__init_deprec_interface
+#include "H5Rmodule.h"          /* This source code file is part of the H5R module */
 
 
 /***********/
@@ -84,51 +81,6 @@
 /*******************/
 
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5R__init_deprec_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5R__init_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5R_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5R__init_deprec_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5R_init())
-} /* H5R__init_deprec_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5R__term_deprec_interface -- Terminate interface
-USAGE
-    herr_t H5R__term_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5R__term_deprec_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5R__term_deprec_interface() */
-
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 
 /*--------------------------------------------------------------------------
diff --git a/src/H5Rmodule.h b/src/H5Rmodule.h
new file mode 100644
index 0000000..6799483
--- /dev/null
+++ b/src/H5Rmodule.h
@@ -0,0 +1,36 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5R package.  Including this header means that the source file
+ *		is part of the H5R package.
+ */
+#ifndef _H5Rmodule_H
+#define _H5Rmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5R_MODULE
+#define H5_MY_PKG       H5R
+#define H5_MY_PKG_ERR   H5E_REFERENCE
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Rmodule_H */
+
+
diff --git a/src/H5Rpkg.h b/src/H5Rpkg.h
index fd16754..8ed8d65 100644
--- a/src/H5Rpkg.h
+++ b/src/H5Rpkg.h
@@ -21,7 +21,7 @@
  *              only within the H5R package. Source files outside the
  *              H5R package should include H5Rprivate.h instead.
  */
-#ifndef H5R_PACKAGE
+#if !(defined H5R_FRIEND || defined H5R_MODULE)
 #error "Do not include this file outside the H5R package!"
 #endif
 
@@ -54,8 +54,6 @@
 /******************************/
 
 /* General functions */
-H5_DLL herr_t H5R_init(void);
-H5_DLL herr_t H5R__term_deprec_interface(void);
 H5_DLL herr_t H5R_get_obj_type(H5F_t *file, hid_t dxpl_id, H5R_type_t ref_type,
     const void *_ref, H5O_type_t *obj_type);
 H5_DLL hid_t H5R_dereference(H5F_t *file, hid_t dapl_id, hid_t dxpl_id, H5R_type_t ref_type,
diff --git a/src/H5S.c b/src/H5S.c
index c70c9b0..1d07f14 100644
--- a/src/H5S.c
+++ b/src/H5S.c
@@ -17,10 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5S_init_interface
+#include "H5Smodule.h"          /* This source code file is part of the H5S module */
 
 
 /***********/
@@ -59,6 +56,9 @@ static htri_t H5S_is_simple(const H5S_t *sdim);
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 
 /*****************************/
 /* Library Private Variables */
@@ -76,7 +76,7 @@ H5FL_DEFINE(H5S_extent_t);
 H5FL_DEFINE(H5S_t);
 
 /* Declare a free list to manage the array's of hsize_t's */
-H5FL_ARR_DEFINE(hsize_t,H5S_MAX_RANK);
+H5FL_ARR_DEFINE(hsize_t, H5S_MAX_RANK);
 
 /* Dataspace ID class */
 static const H5I_class_t H5I_DATASPACE_CLS[1] = {{
@@ -86,47 +86,52 @@ static const H5I_class_t H5I_DATASPACE_CLS[1] = {{
     (H5I_free_t)H5S_close	/* Callback routine for closing objects of this class */
 }};
 
+/* Flag indicating "top" of interface has been initialized */
+static hbool_t H5S_top_package_initialize_s = FALSE;
+
 
 
 /*--------------------------------------------------------------------------
 NAME
-   H5S_init_interface -- Initialize interface-specific information
+   H5S__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5S_init_interface()
-
+    herr_t H5S__init_package()
 RETURNS
     Non-negative on success/Negative on failure
 DESCRIPTION
     Initializes any interface-specific data or routines.
-
 --------------------------------------------------------------------------*/
-static herr_t
-H5S_init_interface(void)
+herr_t
+H5S__init_package(void)
 {
     herr_t ret_value = SUCCEED;   /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_PACKAGE
 
     /* Initialize the atom group for the file IDs */
     if(H5I_register_type(H5I_DATASPACE_CLS) < 0)
 	HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINIT, FAIL, "unable to initialize interface")
 
+    /* Mark "top" of interface as initialized, too */
+    H5S_top_package_initialize_s = TRUE;
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5S_init_interface() */
+} /* end H5S__init_package() */
 
 
 /*--------------------------------------------------------------------------
  NAME
-    H5S_term_interface
+    H5S_top_term_package
  PURPOSE
     Terminate various H5S objects
  USAGE
-    void H5S_term_interface()
+    void H5S_top_term_package()
  RETURNS
     Non-negative on success/Negative on failure
  DESCRIPTION
-    Release the atom group and any other resources allocated.
+    Release IDs for the atom group, deferring full interface shutdown
+    until later (in H5S_term_package).
  GLOBAL VARIABLES
  COMMENTS, BUGS, ASSUMPTIONS
      Can't report errors...
@@ -134,29 +139,69 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 int
-H5S_term_interface(void)
+H5S_top_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5S_top_package_initialize_s) {
 	if(H5I_nmembers(H5I_DATASPACE) > 0) {
 	    (void)H5I_clear_type(H5I_DATASPACE, FALSE, FALSE);
             n++; /*H5I*/
 	} /* end if */
-        else {
-            /* Destroy the dataspace object id group */
-	    (void)H5I_dec_type_ref(H5I_DATASPACE);
-            n++; /*H5I*/
 
-	    /* Shut down interface */
-	    H5_interface_initialize_g = 0;
-	} /* end else */
+	/* Mark "top" of interface as closed */
+        if(0 == n)
+            H5S_top_package_initialize_s = FALSE;
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(n)
+} /* end H5S_top_term_package() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5S_term_package
+ PURPOSE
+    Terminate various H5S objects
+ USAGE
+    void H5S_term_package()
+ RETURNS
+    Non-negative on success/Negative on failure
+ DESCRIPTION
+    Release the atom group and any other resources allocated.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+     Can't report errors...
+
+     Finishes shutting down the interface, after H5S_top_term_package()
+     is called
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+int
+H5S_term_package(void)
+{
+    int	n = 0;
+
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+    if(H5_PKG_INIT_VAR) {
+        /* Sanity checks */
+        HDassert(0 == H5I_nmembers(H5I_DATASPACE));
+        HDassert(FALSE == H5S_top_package_initialize_s);
+
+        /* Destroy the dataspace object id group */
+        n += (H5I_dec_type_ref(H5I_DATASPACE) > 0);
+
+	/* Mark interface as closed */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5S_term_interface() */
+} /* end H5S_term_package() */
 
 
 /*--------------------------------------------------------------------------
@@ -181,7 +226,7 @@ H5S_t *
 H5S_create(H5S_class_t type)
 {
     H5S_t *new_ds = NULL;    /* New dataspace created */
-    H5S_t *ret_value;           /* Return value */
+    H5S_t *ret_value = NULL; /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -617,8 +662,8 @@ done:
 H5S_t *
 H5S_copy(const H5S_t *src, hbool_t share_selection, hbool_t copy_max)
 {
-    H5S_t		   *dst = NULL;
-    H5S_t		   *ret_value;   /* Return value */
+    H5S_t	*dst = NULL;
+    H5S_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -669,7 +714,7 @@ done:
 hssize_t
 H5S_get_simple_extent_npoints(const H5S_t *ds)
 {
-    hssize_t    ret_value;
+    hssize_t    ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI(-1)
 
@@ -745,8 +790,8 @@ done:
 hsize_t
 H5S_get_npoints_max(const H5S_t *ds)
 {
-    hsize_t	    ret_value;
     unsigned	    u;
+    hsize_t	    ret_value = 0;      /* Return value */
 
     FUNC_ENTER_NOAPI(0)
 
@@ -850,7 +895,7 @@ done:
 int
 H5S_get_simple_extent_ndims(const H5S_t *ds)
 {
-    int	ret_value;      /* Return value */
+    int	ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -935,8 +980,8 @@ done:
 int
 H5S_extent_get_dims(const H5S_extent_t *ext, hsize_t dims[], hsize_t max_dims[])
 {
-    int	i;              /* Local index variable */
-    int	ret_value;      /* Return value */
+    int	i;                      /* Local index variable */
+    int	ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -994,7 +1039,7 @@ done:
 int
 H5S_get_simple_extent_dims(const H5S_t *ds, hsize_t dims[], hsize_t max_dims[])
 {
-    int	ret_value;      /* Return value */
+    int	ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -1102,8 +1147,8 @@ done:
 H5S_t *
 H5S_read(const H5O_loc_t *loc, hid_t dxpl_id)
 {
-    H5S_t	   *ds = NULL;          /* Dataspace to return */
-    H5S_t	   *ret_value;          /* Return value */
+    H5S_t	*ds = NULL;             /* Dataspace to return */
+    H5S_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1150,7 +1195,7 @@ done:
 static htri_t
 H5S_is_simple(const H5S_t *sdim)
 {
-    htri_t		    ret_value;
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1455,7 +1500,7 @@ H5S_t *
 H5S_create_simple(unsigned rank, const hsize_t dims[/*rank*/],
 		  const hsize_t maxdims[/*rank*/])
 {
-    H5S_t	*ret_value;     /* Return value */
+    H5S_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1652,7 +1697,7 @@ H5S_decode(const unsigned char **p)
     size_t      extent_size;            /* size of the extent message*/
     H5F_t       *f = NULL;              /* Fake file structure*/
     uint8_t     sizeof_size;            /* 'Size of sizes' for file */
-    H5S_t       *ret_value;
+    H5S_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1734,7 +1779,7 @@ done:
 H5S_class_t
 H5S_get_simple_extent_type(const H5S_t *space)
 {
-    H5S_class_t	ret_value;
+    H5S_class_t	ret_value = H5S_NO_CLASS;       /* Return value */
 
     FUNC_ENTER_NOAPI(H5S_NO_CLASS)
 
@@ -1932,7 +1977,7 @@ done:
 hbool_t
 H5S_has_extent(const H5S_t *ds)
 {
-    hbool_t ret_value;
+    hbool_t ret_value = FALSE;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5SL.c b/src/H5SL.c
index d766066..1cd64ec 100644
--- a/src/H5SL.c
+++ b/src/H5SL.c
@@ -59,16 +59,15 @@
  *
  */
 
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5SL_init_interface
+#include "H5SLmodule.h"         /* This source code file is part of the H5SL module */
 
 
 /* Private headers needed */
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
 #include "H5FLprivate.h"	/* Free Lists                           */
+#include "H5MMprivate.h"	/* Memory management                    */
 #include "H5SLprivate.h"	/* Skip list routines			*/
-#include "H5MMprivate.h"    /* Memory management                    */
 
 /* Local Macros */
 
@@ -576,6 +575,9 @@ static H5SL_node_t *H5SL_insert_common(H5SL_t *slist, void *item, const void *ke
 static herr_t H5SL_release_common(H5SL_t *slist, H5SL_operator_t op, void *op_data);
 static herr_t H5SL_close_common(H5SL_t *slist, H5SL_operator_t op, void *op_data);
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Declare a free list to manage the H5SL_t struct */
 H5FL_DEFINE_STATIC(H5SL_t);
 
@@ -590,12 +592,11 @@ static size_t H5SL_fac_nalloc_g;
 
 /*--------------------------------------------------------------------------
  NAME
-    H5SL_init_interface
+    H5SL__init_package
  PURPOSE
     Initialize interface-specific information
  USAGE
-    herr_t H5SL_init_interface()
-
+    herr_t H5SL__init_package()
  RETURNS
     Non-negative on success/Negative on failure
  DESCRIPTION
@@ -605,10 +606,10 @@ static size_t H5SL_fac_nalloc_g;
  EXAMPLES
  REVISION LOG
 --------------------------------------------------------------------------*/
-static herr_t
-H5SL_init_interface(void)
+herr_t
+H5SL__init_package(void)
 {
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_PACKAGE_NOERR
 
     /* Allocate space for array of factories */
     H5SL_fac_g = (H5FL_fac_head_t **)H5MM_malloc(sizeof(H5FL_fac_head_t *));
@@ -621,7 +622,64 @@ H5SL_init_interface(void)
     H5SL_fac_nused_g = 1;
 
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5SL_init_interface() */
+} /* end H5SL__init_package() */
+
+
+/*--------------------------------------------------------------------------
+ NAME
+    H5SL_term_package
+ PURPOSE
+    Terminate all the H5FL factories used in this package, and clear memory
+ USAGE
+    int H5SL_term_package()
+ RETURNS
+    Success:	Positive if any action might have caused a change in some
+                other interface; zero otherwise.
+   	Failure:	Negative
+ DESCRIPTION
+    Release any resources allocated.
+ GLOBAL VARIABLES
+ COMMENTS, BUGS, ASSUMPTIONS
+     Can't report errors...
+ EXAMPLES
+ REVISION LOG
+--------------------------------------------------------------------------*/
+int H5SL_term_package(void)
+{
+    int     n = 0;
+
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+    if(H5_PKG_INIT_VAR) {
+        /* Terminate all the factories */
+        if(H5SL_fac_nused_g > 0) {
+            size_t  i;
+            herr_t  ret;
+
+            for(i = 0; i < H5SL_fac_nused_g; i++) {
+                ret = H5FL_fac_term(H5SL_fac_g[i]);
+                HDassert(ret >= 0);
+            } /* end if */
+            H5SL_fac_nused_g = 0;
+
+            n++;
+        } /* end if */
+
+        /* Free the list of factories */
+        if(H5SL_fac_g) {
+            H5SL_fac_g = (H5FL_fac_head_t **)H5MM_xfree((void *)H5SL_fac_g);
+            H5SL_fac_nalloc_g = 0;
+
+            n++;
+        } /* end if */
+
+        /* Mark the interface as uninitialized */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(n)
+} /* H5SL_term_package() */
 
 
 /*--------------------------------------------------------------------------
@@ -649,7 +707,7 @@ H5SL_init_interface(void)
 static H5SL_node_t *
 H5SL_new_node(void *item, const void *key, uint32_t hashval)
 {
-    H5SL_node_t *ret_value;      /* New skip list node */
+    H5SL_node_t *ret_value = NULL;      /* New skip list node */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -938,7 +996,7 @@ H5SL_create(H5SL_type_t type, H5SL_cmp_t cmp)
 {
     H5SL_t *new_slist = NULL;   /* Pointer to new skip list object created */
     H5SL_node_t *header;        /* Pointer to skip list header node */
-    H5SL_t *ret_value;          /* Return value */
+    H5SL_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1097,7 +1155,7 @@ done:
 H5SL_node_t *
 H5SL_add(H5SL_t *slist, void *item, const void *key)
 {
-    H5SL_node_t *ret_value;                   /* Return value */
+    H5SL_node_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1425,9 +1483,9 @@ done:
 void *
 H5SL_less(H5SL_t *slist, const void *key)
 {
-    H5SL_node_t *x;                             /* Current node to examine */
-    uint32_t hashval = 0;                       /* Hash value for key */
-    void *ret_value;                            /* Return value */
+    H5SL_node_t *x;             /* Current node to examine */
+    uint32_t hashval = 0;       /* Hash value for key */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1534,9 +1592,9 @@ done:
 void *
 H5SL_greater(H5SL_t *slist, const void *key)
 {
-    H5SL_node_t *x;                             /* Current node to examine */
-    uint32_t hashval = 0;                       /* Hash value for key */
-    void *ret_value;                            /* Return value */
+    H5SL_node_t *x;                     /* Current node to examine */
+    uint32_t hashval = 0;               /* Hash value for key */
+    void *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1726,9 +1784,9 @@ done:
 H5SL_node_t *
 H5SL_below(H5SL_t *slist, const void *key)
 {
-    H5SL_node_t *x;                             /* Current node to examine */
-    uint32_t hashval = 0;                       /* Hash value for key */
-    H5SL_node_t *ret_value;                     /* Return value */
+    H5SL_node_t *x;                     /* Current node to examine */
+    uint32_t hashval = 0;               /* Hash value for key */
+    H5SL_node_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1832,9 +1890,9 @@ done:
 H5SL_node_t *
 H5SL_above(H5SL_t *slist, const void *key)
 {
-    H5SL_node_t *x;                             /* Current node to examine */
-    uint32_t hashval = 0;                       /* Hash value for key */
-    H5SL_node_t *ret_value;                     /* Return value */
+    H5SL_node_t *x;                     /* Current node to examine */
+    uint32_t hashval = 0;               /* Hash value for key */
+    H5SL_node_t *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -2509,50 +2567,3 @@ H5SL_close(H5SL_t *slist)
     FUNC_LEAVE_NOAPI(SUCCEED)
 } /* end H5SL_close() */
 
-
-/*--------------------------------------------------------------------------
- NAME
-    H5SL_term_interface
- PURPOSE
-    Terminate all the H5FL factories used in this package, and clear memory
- USAGE
-    int H5SL_term_interface()
- RETURNS
-    Success:	Positive if any action might have caused a change in some
-                other interface; zero otherwise.
-   	Failure:	Negative
- DESCRIPTION
-    Release any resources allocated.
- GLOBAL VARIABLES
- COMMENTS, BUGS, ASSUMPTIONS
-     Can't report errors...
- EXAMPLES
- REVISION LOG
---------------------------------------------------------------------------*/
-int H5SL_term_interface(void)
-{
-    size_t  i;
-    herr_t  ret;
-    int     n = H5_interface_initialize_g ? 1 : 0;
-
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    if(n) {
-        /* Terminate all the factories */
-        for(i=0; i<H5SL_fac_nused_g; i++) {
-            ret = H5FL_fac_term(H5SL_fac_g[i]);
-            HDassert(ret >= 0);
-        }
-        H5SL_fac_nused_g = 0;
-
-        /* Free the list of factories */
-        H5SL_fac_g = (H5FL_fac_head_t **)H5MM_xfree((void *)H5SL_fac_g);
-        H5SL_fac_nalloc_g = 0;
-
-        /* Mark the interface as uninitialized */
-        H5_interface_initialize_g = 0;
-    } /* end if */
-
-    FUNC_LEAVE_NOAPI(n)
-} /* H5SL_term_interface() */
-
diff --git a/src/H5SLmodule.h b/src/H5SLmodule.h
new file mode 100644
index 0000000..d5bfbc2
--- /dev/null
+++ b/src/H5SLmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5SL package.  Including this header means that the source file
+ *		is part of the H5SL package.
+ */
+#ifndef _H5SLmodule_H
+#define _H5SLmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5SL_MODULE
+#define H5_MY_PKG       H5SL
+#define H5_MY_PKG_ERR   H5E_SLIST
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5SLmodule_H */
+
diff --git a/src/H5SM.c b/src/H5SM.c
index 0ed4fbf..e25d780 100644
--- a/src/H5SM.c
+++ b/src/H5SM.c
@@ -17,8 +17,9 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg 	  */
-#define H5SM_PACKAGE		/*suppress error about including H5SMpkg	  */
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
+#include "H5SMmodule.h"         /* This source code file is part of the H5SM module */
+
 
 /***********/
 /* Headers */
@@ -84,6 +85,9 @@ static herr_t H5SM_read_mesg(H5F_t *f, const H5SM_sohm_t *mesg, H5HF_t *fheap,
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 H5FL_DEFINE(H5SM_master_table_t);
 H5FL_ARR_DEFINE(H5SM_index_header_t, H5O_SHMESG_MAX_NINDEXES);
 H5FL_DEFINE(H5SM_list_t);
@@ -642,7 +646,7 @@ H5SM_create_list(H5F_t *f, H5SM_index_header_t *header, hid_t dxpl_id)
     hsize_t x;                  /* Counter variable */
     size_t num_entries;         /* Number of messages to create in list */
     haddr_t addr = HADDR_UNDEF; /* Address of the list on disk */
-    haddr_t ret_value;
+    haddr_t ret_value = HADDR_UNDEF;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, H5AC__SOHM_TAG, HADDR_UNDEF)
 
@@ -885,7 +889,7 @@ done:
 static htri_t
 H5SM_can_share_common(const H5F_t *f, unsigned type_id, const void *mesg)
 {
-    htri_t ret_value;           /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1617,8 +1621,8 @@ done:
 static size_t
 H5SM_find_in_list(const H5SM_list_t *list, const H5SM_mesg_key_t *key, size_t *empty_pos)
 {
-    size_t               x;
-    size_t               ret_value;
+    size_t x;
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5SMbtree2.c b/src/H5SMbtree2.c
index 7706cbd..e24dbb7 100644
--- a/src/H5SMbtree2.c
+++ b/src/H5SMbtree2.c
@@ -17,8 +17,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg 	  */
-#define H5SM_PACKAGE		/*suppress error about including H5SMpkg	  */
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
+#include "H5SMmodule.h"         /* This source code file is part of the H5SM module */
 
 
 /***********/
@@ -97,7 +97,7 @@ H5SM_bt2_crt_context(void *_f)
 {
     H5F_t *f = (H5F_t *)_f;     /* User data for building callback context */
     H5SM_bt2_ctx_t *ctx;        /* Callback context structure */
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5SMcache.c b/src/H5SMcache.c
index 293088c..1bdd95a 100644
--- a/src/H5SMcache.c
+++ b/src/H5SMcache.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5SM_PACKAGE		/*suppress error about including H5SMpkg	  */
+#include "H5SMmodule.h"         /* This source code file is part of the H5SM module */
 
 
 /***********/
@@ -186,7 +186,7 @@ H5SM__cache_table_deserialize(const void *_image, size_t len, void *_udata,
     uint32_t                stored_chksum;      /* Stored metadata checksum value */
     uint32_t                computed_chksum;    /* Computed metadata checksum value */
     size_t                  u;                  /* Counter variable for index headers */
-    void *                  ret_value;          /* Return value */
+    void                   *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_STATIC
 
@@ -510,7 +510,7 @@ H5SM__cache_list_deserialize(const void *_image, size_t len, void *_udata,
     uint32_t              stored_chksum;   /* Stored metadata checksum value */
     uint32_t              computed_chksum; /* Computed metadata checksum value */
     size_t                u;               /* Counter variable for messages in list */
-    void *                ret_value;       /* Return value */
+    void                 *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_STATIC
 
diff --git a/src/H5SMmessage.c b/src/H5SMmessage.c
index d2dff47..5dbe5cf 100644
--- a/src/H5SMmessage.c
+++ b/src/H5SMmessage.c
@@ -17,8 +17,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg 	  */
-#define H5SM_PACKAGE		/*suppress error about including H5SMpkg	  */
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
+#include "H5SMmodule.h"         /* This source code file is part of the H5SM module */
 
 
 /***********/
diff --git a/src/H5SMmodule.h b/src/H5SMmodule.h
new file mode 100644
index 0000000..b6991b6
--- /dev/null
+++ b/src/H5SMmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5SM package.  Including this header means that the source file
+ *		is part of the H5SM package.
+ */
+#ifndef _H5SMmodule_H
+#define _H5SMmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5SM_MODULE
+#define H5_MY_PKG       H5SM
+#define H5_MY_PKG_ERR   H5E_SOHM
+#define H5_MY_PKG_INIT  NO
+
+#endif /* _H5SMmodule_H */
+
diff --git a/src/H5SMpkg.h b/src/H5SMpkg.h
index 68dc484..ac2ba1b 100644
--- a/src/H5SMpkg.h
+++ b/src/H5SMpkg.h
@@ -21,7 +21,7 @@
  *              the H5SM shared object header messages package.  Source files
  *              outside the H5SM package should	include H5SMprivate.h instead.
  */
-#ifndef H5SM_PACKAGE
+#if !(defined H5SM_FRIEND || defined H5SM_MODULE)
 #error "Do not include this file outside the H5SM package!"
 #endif
 
diff --git a/src/H5SMtest.c b/src/H5SMtest.c
index c4e02bc..798203d 100644
--- a/src/H5SMtest.c
+++ b/src/H5SMtest.c
@@ -17,7 +17,7 @@
 /* Module Setup */
 /****************/
 
-#define H5SM_PACKAGE		/*suppress error about including H5SMpkg	  */
+#include "H5SMmodule.h"         /* This source code file is part of the H5SM module */
 #define H5SM_TESTING		/*suppress warning about H5SM testing funcs*/
 
 
diff --git a/src/H5Sall.c b/src/H5Sall.c
index 568327a..79796c3 100644
--- a/src/H5Sall.c
+++ b/src/H5Sall.c
@@ -20,7 +20,7 @@
  * Purpose:	"All" selection data space I/O functions.
  */
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
+#include "H5Smodule.h"          /* This source code file is part of the H5S module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -44,7 +44,7 @@ static herr_t H5S_all_deserialize(H5S_t *space, uint32_t version, uint8_t flags,
     const uint8_t **p);
 static herr_t H5S_all_bounds(const H5S_t *space, hsize_t *start, hsize_t *end);
 static herr_t H5S_all_offset(const H5S_t *space, hsize_t *off);
-static int H5S_all_unlim_dim(const H5S_t *space);
+static int H5S__all_unlim_dim(const H5S_t *space);
 static htri_t H5S_all_is_contiguous(const H5S_t *space);
 static htri_t H5S_all_is_single(const H5S_t *space);
 static htri_t H5S_all_is_regular(const H5S_t *space);
@@ -76,7 +76,7 @@ const H5S_select_class_t H5S_sel_all[1] = {{
     H5S_all_deserialize,
     H5S_all_bounds,
     H5S_all_offset,
-    H5S_all_unlim_dim,
+    H5S__all_unlim_dim,
     NULL,
     H5S_all_is_contiguous,
     H5S_all_is_single,
@@ -666,11 +666,11 @@ H5S_all_offset(const H5S_t H5_ATTR_UNUSED *space, hsize_t *offset)
 
 /*--------------------------------------------------------------------------
  NAME
-    H5S_all_unlim_dim
+    H5S__all_unlim_dim
  PURPOSE
     Return unlimited dimension of selection, or -1 if none
  USAGE
-    int H5S_all_unlim_dim(space)
+    int H5S__all_unlim_dim(space)
         H5S_t *space;           IN: Dataspace pointer to check
  RETURNS
     Unlimited dimension of selection, or -1 if none (never fails).
@@ -686,12 +686,12 @@ H5S_all_offset(const H5S_t H5_ATTR_UNUSED *space, hsize_t *offset)
  REVISION LOG
 --------------------------------------------------------------------------*/
 static int
-H5S_all_unlim_dim(const H5S_t H5_ATTR_UNUSED *space)
+H5S__all_unlim_dim(const H5S_t H5_ATTR_UNUSED *space)
 {
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     FUNC_LEAVE_NOAPI(-1)
-} /* end H5S_all_unlim_dim() */
+} /* end H5S__all_unlim_dim() */
 
 
 /*--------------------------------------------------------------------------
diff --git a/src/H5Sdbg.c b/src/H5Sdbg.c
index 0cbe4f2..b69604c 100644
--- a/src/H5Sdbg.c
+++ b/src/H5Sdbg.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
+#include "H5Smodule.h"          /* This source code file is part of the H5S module */
 
 
 /***********/
diff --git a/src/H5Shyper.c b/src/H5Shyper.c
index 70c9b67..f0ec40d 100644
--- a/src/H5Shyper.c
+++ b/src/H5Shyper.c
@@ -20,7 +20,7 @@
  * Purpose:	Hyperslab selection data space I/O functions.
  */
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
+#include "H5Smodule.h"          /* This source code file is part of the H5S module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -63,7 +63,7 @@ static herr_t H5S_hyper_deserialize(H5S_t *space, uint32_t version, uint8_t flag
     const uint8_t **p);
 static herr_t H5S_hyper_bounds(const H5S_t *space, hsize_t *start, hsize_t *end);
 static herr_t H5S_hyper_offset(const H5S_t *space, hsize_t *offset);
-static int H5S_hyper_unlim_dim(const H5S_t *space);
+static int H5S__hyper_unlim_dim(const H5S_t *space);
 static herr_t H5S_hyper_num_elem_non_unlim(const H5S_t *space,
     hsize_t *num_elem_non_unlim);
 static htri_t H5S_hyper_is_contiguous(const H5S_t *space);
@@ -102,7 +102,7 @@ const H5S_select_class_t H5S_sel_hyper[1] = {{
     H5S_hyper_deserialize,
     H5S_hyper_bounds,
     H5S_hyper_offset,
-    H5S_hyper_unlim_dim,
+    H5S__hyper_unlim_dim,
     H5S_hyper_num_elem_non_unlim,
     H5S_hyper_is_contiguous,
     H5S_hyper_is_single,
@@ -1104,7 +1104,7 @@ H5S_hyper_iter_release (H5S_sel_iter_t *iter)
 static H5S_hyper_span_t *
 H5S_hyper_new_span(hsize_t low, hsize_t high, H5S_hyper_span_info_t *down, H5S_hyper_span_t *next)
 {
-    H5S_hyper_span_t *ret_value;
+    H5S_hyper_span_t *ret_value = NULL;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1299,7 +1299,7 @@ H5S_hyper_copy_span_helper (H5S_hyper_span_info_t *spans)
     H5S_hyper_span_t *new_span;     /* Temporary hyperslab span */
     H5S_hyper_span_t *prev_span;    /* Previous hyperslab span */
     H5S_hyper_span_info_t *new_down;    /* New down span tree */
-    H5S_hyper_span_info_t *ret_value;
+    H5S_hyper_span_info_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1385,7 +1385,7 @@ done:
 static H5S_hyper_span_info_t *
 H5S_hyper_copy_span(H5S_hyper_span_info_t *spans)
 {
-    H5S_hyper_span_info_t *ret_value;
+    H5S_hyper_span_info_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1766,9 +1766,9 @@ static htri_t
 H5S_hyper_is_valid (const H5S_t *space)
 {
     unsigned u;                    /* Counter */
-    htri_t ret_value=TRUE;      /* return value */
+    htri_t ret_value = TRUE;      /* return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(FAIL)
 
     HDassert(space);
 
@@ -1875,7 +1875,7 @@ H5S_hyper_span_nblocks(H5S_hyper_span_info_t *spans)
 static hsize_t
 H5S_get_select_hyper_nblocks(H5S_t *space)
 {
-    hsize_t ret_value;         /* return value */
+    hsize_t ret_value = 0;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1961,9 +1961,9 @@ done:
 static hssize_t
 H5S_hyper_serial_size(const H5S_t *space)
 {
-    unsigned u;                 /* Counter */
     hsize_t block_count;       /* block counter for regular hyperslabs */
-    hssize_t ret_value;         /* return value */
+    unsigned u;                /* Counter */
+    hssize_t ret_value = -1;   /* return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -2972,11 +2972,11 @@ done:
 
 /*--------------------------------------------------------------------------
  NAME
-    H5S_hyper_unlim_dim
+    H5S__hyper_unlim_dim
  PURPOSE
     Return unlimited dimension of selection, or -1 if none
  USAGE
-    int H5S_hyper_unlim_dim(space)
+    int H5S__hyper_unlim_dim(space)
         H5S_t *space;           IN: Dataspace pointer to check
  RETURNS
     Unlimited dimension of selection, or -1 if none (never fails).
@@ -2989,12 +2989,12 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 static int
-H5S_hyper_unlim_dim(const H5S_t *space)
+H5S__hyper_unlim_dim(const H5S_t *space)
 {
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
-    FUNC_LEAVE_NOAPI(space->select.sel_info.hslab->unlim_dim)
-} /* end H5S_hyper_get_unlim_dim() */
+    FUNC_LEAVE_NOAPI(space->select.sel_info.hslab->unlim_dim);
+} /* end H5S__hyper_unlim_dim() */
 
 
 /*--------------------------------------------------------------------------
@@ -3065,7 +3065,7 @@ H5S_hyper_is_contiguous(const H5S_t *space)
     unsigned u;                     /* index variable */
     htri_t ret_value = FALSE;       /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(FAIL)
 
     HDassert(space);
 
@@ -3220,6 +3220,7 @@ H5S_hyper_is_contiguous(const H5S_t *space)
             ret_value=TRUE;
     } /* end else */
 
+done:
     FUNC_LEAVE_NOAPI(ret_value)
 }   /* H5S_hyper_is_contiguous() */
 
@@ -3250,7 +3251,7 @@ H5S_hyper_is_single(const H5S_t *space)
     unsigned u;                     /* index variable */
     htri_t ret_value=TRUE;         /* return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(FAIL)
 
     HDassert(space);
 
@@ -3315,7 +3316,7 @@ done:
 static htri_t
 H5S_hyper_is_regular(const H5S_t *space)
 {
-    htri_t ret_value;  /* return value */
+    htri_t ret_value = FAIL;    /* return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -5442,7 +5443,7 @@ H5S_hyper_merge_spans_helper (H5S_hyper_span_info_t *a_spans, H5S_hyper_span_inf
     H5S_hyper_span_t *span_b;           /* Pointer to current span 'b' working on */
     H5S_hyper_span_t *prev_span_merge;  /* Pointer to previous merged span */
     unsigned recover_a, recover_b;         /* Flags to indicate when to recover temporary spans */
-    H5S_hyper_span_info_t *ret_value;
+    H5S_hyper_span_info_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -5810,7 +5811,7 @@ static hsize_t
 H5S_hyper_spans_nelem (H5S_hyper_span_info_t *spans)
 {
     H5S_hyper_span_t *span;     /* Hyperslab span */
-    hsize_t ret_value;
+    hsize_t ret_value = 0;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -5872,7 +5873,7 @@ H5S_hyper_make_spans(unsigned rank, const hsize_t *start, const hsize_t *stride,
     hsize_t                stride_iter;     /* Iterator over the stride values */
     int                    i;               /* Counters */
     unsigned               u;               /* Counters */
-    H5S_hyper_span_info_t *ret_value;       /* Return value */
+    H5S_hyper_span_info_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -9097,7 +9098,7 @@ H5S_hyper_get_seq_list(const H5S_t *space, unsigned H5_ATTR_UNUSED flags, H5S_se
     size_t maxseq, size_t maxelem, size_t *nseq, size_t *nelem,
     hsize_t *off, size_t *len)
 {
-    herr_t ret_value;      /* return value */
+    herr_t ret_value = FAIL;    /* return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -9966,7 +9967,7 @@ H5S__hyper_get_clip_extent_real(const H5S_t *clip_space, hsize_t num_slices,
     const H5S_hyper_dim_t *diminfo; /* Convenience pointer to opt_unlim_diminfo in unlimited dimension */
     hsize_t count;
     hsize_t rem_slices;
-    hsize_t ret_value;          /* Return value */
+    hsize_t ret_value = 0;      /* Return value */
 
     FUNC_ENTER_STATIC_NOERR
 
@@ -10046,9 +10047,9 @@ H5S_hyper_get_clip_extent(const H5S_t *clip_space, const H5S_t *match_space,
     hbool_t incl_trail)
 {
     hsize_t num_slices;         /* Number of slices in unlimited dimension */
-    hsize_t ret_value;          /* Return value */
+    hsize_t ret_value = 0;      /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(0)
 
     /* Check parameters */
     HDassert(clip_space);
@@ -10072,6 +10073,7 @@ H5S_hyper_get_clip_extent(const H5S_t *clip_space, const H5S_t *match_space,
     /* Call "real" get_clip_extent function */
     ret_value = H5S__hyper_get_clip_extent_real(clip_space, num_slices, incl_trail);
 
+done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5S_hyper_get_clip_extent() */
 
@@ -10114,9 +10116,9 @@ H5S_hyper_get_clip_extent_match(const H5S_t *clip_space,
     hsize_t count;              /* Temporary count */
     hsize_t block;              /* Temporary block */
     hsize_t num_slices;         /* Number of slices in unlimited dimension */
-    hsize_t ret_value;          /* Return value */
+    hsize_t ret_value = 0;      /* Return value */
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(0)
 
     /* Check parameters */
     HDassert(clip_space);
@@ -10161,6 +10163,7 @@ H5S_hyper_get_clip_extent_match(const H5S_t *clip_space,
     /* Call "real" get_clip_extent function */
     ret_value = H5S__hyper_get_clip_extent_real(clip_space, num_slices, incl_trail);
 
+done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5S_hyper_get_clip_extent_match() */
 
@@ -10278,9 +10281,9 @@ H5S_hyper_get_first_inc_block(const H5S_t *space, hsize_t clip_size,
 {
     H5S_hyper_sel_t *hslab;     /* Convenience pointer to hyperslab info */
     H5S_hyper_dim_t *diminfo;   /* Convenience pointer to opt_diminfo in unlimited dimension */
-    hsize_t ret_value;
+    hsize_t ret_value = 0;
 
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_NOAPI(0)
 
     /* Check parameters */
     HDassert(space);
@@ -10311,6 +10314,7 @@ H5S_hyper_get_first_inc_block(const H5S_t *space, hsize_t clip_size,
         } /* end if */
     } /* end else */
 
+done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5S_hyper_get_first_inc_block */
 
diff --git a/src/H5Smodule.h b/src/H5Smodule.h
new file mode 100644
index 0000000..d4d94f2
--- /dev/null
+++ b/src/H5Smodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5S package.  Including this header means that the source file
+ *		is part of the H5S package.
+ */
+#ifndef _H5Smodule_H
+#define _H5Smodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5S_MODULE
+#define H5_MY_PKG       H5S
+#define H5_MY_PKG_ERR   H5E_DATASPACE
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Smodule_H */
+
diff --git a/src/H5Smpio.c b/src/H5Smpio.c
index c2190b4..1f97bc8 100644
--- a/src/H5Smpio.c
+++ b/src/H5Smpio.c
@@ -22,7 +22,7 @@
  *		I didn't make them portable.
  */
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
+#include "H5Smodule.h"          /* This source code file is part of the H5S module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
diff --git a/src/H5Snone.c b/src/H5Snone.c
index 74a9b82..2fbd44b 100644
--- a/src/H5Snone.c
+++ b/src/H5Snone.c
@@ -20,7 +20,7 @@
  * Purpose:	"None" selection data space I/O functions.
  */
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
+#include "H5Smodule.h"          /* This source code file is part of the H5S module */
 
 
 #include "H5private.h"
@@ -45,7 +45,7 @@ static herr_t H5S_none_deserialize(H5S_t *space, uint32_t version, uint8_t flags
     const uint8_t **p);
 static herr_t H5S_none_bounds(const H5S_t *space, hsize_t *start, hsize_t *end);
 static herr_t H5S_none_offset(const H5S_t *space, hsize_t *off);
-static int H5S_none_unlim_dim(const H5S_t *space);
+static int H5S__none_unlim_dim(const H5S_t *space);
 static htri_t H5S_none_is_contiguous(const H5S_t *space);
 static htri_t H5S_none_is_single(const H5S_t *space);
 static htri_t H5S_none_is_regular(const H5S_t *space);
@@ -77,7 +77,7 @@ const H5S_select_class_t H5S_sel_none[1] = {{
     H5S_none_deserialize,
     H5S_none_bounds,
     H5S_none_offset,
-    H5S_none_unlim_dim,
+    H5S__none_unlim_dim,
     NULL,
     H5S_none_is_contiguous,
     H5S_none_is_single,
@@ -617,11 +617,11 @@ H5S_none_offset(const H5S_t H5_ATTR_UNUSED *space, hsize_t H5_ATTR_UNUSED *offse
 
 /*--------------------------------------------------------------------------
  NAME
-    H5S_none_unlim_dim
+    H5S__none_unlim_dim
  PURPOSE
     Return unlimited dimension of selection, or -1 if none
  USAGE
-    int H5S_none_unlim_dim(space)
+    int H5S__none_unlim_dim(space)
         H5S_t *space;           IN: Dataspace pointer to check
  RETURNS
     Unlimited dimension of selection, or -1 if none (never fails).
@@ -635,12 +635,12 @@ H5S_none_offset(const H5S_t H5_ATTR_UNUSED *space, hsize_t H5_ATTR_UNUSED *offse
  REVISION LOG
 --------------------------------------------------------------------------*/
 static int
-H5S_none_unlim_dim(const H5S_t H5_ATTR_UNUSED *space)
+H5S__none_unlim_dim(const H5S_t H5_ATTR_UNUSED *space)
 {
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     FUNC_LEAVE_NOAPI(-1)
-} /* end H5S_none_unlim_dim() */
+} /* end H5S__none_unlim_dim() */
 
 
 /*--------------------------------------------------------------------------
diff --git a/src/H5Spkg.h b/src/H5Spkg.h
index b4210c2..e57650a 100644
--- a/src/H5Spkg.h
+++ b/src/H5Spkg.h
@@ -21,7 +21,7 @@
  *		the H5S package.  Source files outside the H5S package should
  *		include H5Sprivate.h instead.
  */
-#ifndef H5S_PACKAGE
+#if !(defined H5S_FRIEND || defined H5S_MODULE)
 #error "Do not include this file outside the H5S package!"
 #endif
 
diff --git a/src/H5Spoint.c b/src/H5Spoint.c
index 202da85..1a14254 100644
--- a/src/H5Spoint.c
+++ b/src/H5Spoint.c
@@ -20,7 +20,7 @@
  * Purpose:	Point selection data space I/O functions.
  */
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
+#include "H5Smodule.h"          /* This source code file is part of the H5S module */
 
 
 #include "H5private.h"		/* Generic Functions			  */
@@ -46,7 +46,7 @@ static herr_t H5S_point_deserialize(H5S_t *space, uint32_t version, uint8_t flag
     const uint8_t **p);
 static herr_t H5S_point_bounds(const H5S_t *space, hsize_t *start, hsize_t *end);
 static herr_t H5S_point_offset(const H5S_t *space, hsize_t *off);
-static int H5S_point_unlim_dim(const H5S_t *space);
+static int H5S__point_unlim_dim(const H5S_t *space);
 static htri_t H5S_point_is_contiguous(const H5S_t *space);
 static htri_t H5S_point_is_single(const H5S_t *space);
 static htri_t H5S_point_is_regular(const H5S_t *space);
@@ -78,7 +78,7 @@ const H5S_select_class_t H5S_sel_point[1] = {{
     H5S_point_deserialize,
     H5S_point_bounds,
     H5S_point_offset,
-    H5S_point_unlim_dim,
+    H5S__point_unlim_dim,
     NULL,
     H5S_point_is_contiguous,
     H5S_point_is_single,
@@ -778,7 +778,7 @@ static hssize_t
 H5S_point_serial_size (const H5S_t *space)
 {
     H5S_pnt_node_t *curr;       /* Point information nodes */
-    hssize_t ret_value;         /* return value */
+    hssize_t ret_value = -1;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1193,11 +1193,11 @@ done:
 
 /*--------------------------------------------------------------------------
  NAME
-    H5S_point_unlim_dim
+    H5S__point_unlim_dim
  PURPOSE
     Return unlimited dimension of selection, or -1 if none
  USAGE
-    int H5S_point_unlim_dim(space)
+    int H5S__point_unlim_dim(space)
         H5S_t *space;           IN: Dataspace pointer to check
  RETURNS
     Unlimited dimension of selection, or -1 if none (never fails).
@@ -1212,12 +1212,12 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 static int
-H5S_point_unlim_dim(const H5S_t H5_ATTR_UNUSED *space)
+H5S__point_unlim_dim(const H5S_t H5_ATTR_UNUSED *space)
 {
-    FUNC_ENTER_NOAPI_NOERR
+    FUNC_ENTER_STATIC_NOERR
 
     FUNC_LEAVE_NOAPI(-1)
-} /* end H5S_point_unlim_dim() */
+} /* end H5S__point_unlim_dim() */
 
 
 /*--------------------------------------------------------------------------
@@ -1244,7 +1244,7 @@ H5S_point_unlim_dim(const H5S_t H5_ATTR_UNUSED *space)
 static htri_t
 H5S_point_is_contiguous(const H5S_t *space)
 {
-    htri_t ret_value;  /* return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1281,7 +1281,7 @@ H5S_point_is_contiguous(const H5S_t *space)
 static htri_t
 H5S_point_is_single(const H5S_t *space)
 {
-    htri_t ret_value;  /* return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1321,7 +1321,7 @@ H5S_point_is_single(const H5S_t *space)
 static htri_t
 H5S_point_is_regular(const H5S_t *space)
 {
-    htri_t ret_value;  /* return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Sprivate.h b/src/H5Sprivate.h
index e6816e2..6c4265d 100644
--- a/src/H5Sprivate.h
+++ b/src/H5Sprivate.h
@@ -116,7 +116,7 @@ typedef struct H5S_sel_iter_t {
 } H5S_sel_iter_t;
 
 /* If the module using this macro is allowed access to the private variables, access them directly */
-#ifdef H5S_PACKAGE
+#ifdef H5S_MODULE
 #define H5S_GET_EXTENT_TYPE(S)          ((S)->extent.type)
 #define H5S_GET_EXTENT_NDIMS(S)         ((S)->extent.rank)
 #define H5S_GET_EXTENT_NPOINTS(S)       ((S)->extent.nelem)
@@ -142,7 +142,7 @@ typedef struct H5S_sel_iter_t {
 #define H5S_SELECT_ITER_NEXT(ITER,NELEM)((*(ITER)->type->iter_next)(ITER,NELEM))
 #define H5S_SELECT_ITER_NEXT_BLOCK(ITER)        ((*(ITER)->type->iter_next_block)(ITER))
 #define H5S_SELECT_ITER_RELEASE(ITER)   ((*(ITER)->type->iter_release)(ITER))
-#else /* H5S_PACKAGE */
+#else /* H5S_MODULE */
 #define H5S_GET_EXTENT_TYPE(S)          (H5S_get_simple_extent_type(S))
 #define H5S_GET_EXTENT_NDIMS(S)         (H5S_get_simple_extent_ndims(S))
 #define H5S_GET_EXTENT_NPOINTS(S)       (H5S_get_simple_extent_npoints(S))
@@ -168,7 +168,7 @@ typedef struct H5S_sel_iter_t {
 #define H5S_SELECT_ITER_NEXT(ITER,NELEM)(H5S_select_iter_next(ITER,NELEM))
 #define H5S_SELECT_ITER_NEXT_BLOCK(ITER)        (H5S_select_iter_next_block(ITER))
 #define H5S_SELECT_ITER_RELEASE(ITER)   (H5S_select_iter_release(ITER))
-#endif /* H5S_PACKAGE */
+#endif /* H5S_MODULE */
 /* Handle these two callbacks in a special way, since they have prologs that need to be executed */
 #define H5S_SELECT_COPY(DST,SRC,SHARE)  (H5S_select_copy(DST,SRC,SHARE))
 #define H5S_SELECT_DESERIALIZE(S,BUF)   (H5S_select_deserialize(S,BUF))
diff --git a/src/H5Sselect.c b/src/H5Sselect.c
index 6b0ca6e..cf82af1 100644
--- a/src/H5Sselect.c
+++ b/src/H5Sselect.c
@@ -19,7 +19,7 @@
  * Purpose:	Dataspace selection functions.
  */
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
+#include "H5Smodule.h"          /* This source code file is part of the H5S module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -107,7 +107,7 @@ H5S_select_offset(H5S_t *space, const hssize_t *offset)
 herr_t
 H5S_select_copy (H5S_t *dst, const H5S_t *src, hbool_t share_selection)
 {
-    herr_t ret_value;     /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -148,7 +148,7 @@ done:
 herr_t
 H5S_select_release(H5S_t *ds)
 {
-    herr_t ret_value;   /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -185,7 +185,7 @@ H5S_select_get_seq_list(const H5S_t *space, unsigned flags,
     H5S_sel_iter_t *iter, size_t maxseq, size_t maxbytes,
     size_t *nseq, size_t *nbytes, hsize_t *off, size_t *len)
 {
-    herr_t ret_value;   /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -220,7 +220,7 @@ H5S_select_get_seq_list(const H5S_t *space, unsigned flags,
 hssize_t
 H5S_select_serial_size(const H5S_t *space)
 {
-    hssize_t ret_value;   /* Return value */
+    hssize_t ret_value = -1;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -411,7 +411,7 @@ done:
 htri_t
 H5S_select_valid(const H5S_t *space)
 {
-    htri_t ret_value;   /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -452,12 +452,12 @@ H5S_select_valid(const H5S_t *space)
 herr_t
 H5S_select_deserialize(H5S_t **space, const uint8_t **p)
 {
-    H5S_t *tmp_space;       /* Pointer to actual dataspace to use, either
-                               *space or a newly allocated one */
-    uint32_t sel_type;      /* Pointer to the selection type */
-    uint32_t version;       /* Version number */
-    uint8_t flags = 0;      /* Flags */
-    herr_t ret_value=FAIL;  /* return value */
+    H5S_t *tmp_space = NULL;    /* Pointer to actual dataspace to use, either
+                                 *space or a newly allocated one */
+    uint32_t sel_type;          /* Pointer to the selection type */
+    uint32_t version;           /* Version number */
+    uint8_t flags = 0;          /* Flags */
+    herr_t ret_value = FAIL;    /* return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -633,7 +633,7 @@ done:
 herr_t
 H5S_get_select_bounds(const H5S_t *space, hsize_t *start, hsize_t *end)
 {
-    herr_t ret_value;        /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -674,7 +674,7 @@ H5S_get_select_bounds(const H5S_t *space, hsize_t *start, hsize_t *end)
 herr_t
 H5S_get_select_offset(const H5S_t *space, hsize_t *offset)
 {
-    herr_t ret_value;        /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -795,7 +795,7 @@ done:
 htri_t
 H5S_select_is_contiguous(const H5S_t *space)
 {
-    herr_t ret_value;        /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -832,7 +832,7 @@ H5S_select_is_contiguous(const H5S_t *space)
 htri_t
 H5S_select_is_single(const H5S_t *space)
 {
-    herr_t ret_value;        /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -869,7 +869,7 @@ H5S_select_is_single(const H5S_t *space)
 htri_t
 H5S_select_is_regular(const H5S_t *space)
 {
-    herr_t ret_value;        /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -906,7 +906,7 @@ H5S_select_is_regular(const H5S_t *space)
 herr_t
 H5S_select_adjust_u(H5S_t *space, const hsize_t *offset)
 {
-    herr_t ret_value;        /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -944,7 +944,7 @@ H5S_select_adjust_u(H5S_t *space, const hsize_t *offset)
 herr_t
 H5S_select_project_scalar(const H5S_t *space, hsize_t *offset)
 {
-    herr_t ret_value;        /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -984,7 +984,7 @@ H5S_select_project_scalar(const H5S_t *space, hsize_t *offset)
 herr_t
 H5S_select_project_simple(const H5S_t *space, H5S_t *new_space, hsize_t *offset)
 {
-    herr_t ret_value;        /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1019,7 +1019,7 @@ H5S_select_project_simple(const H5S_t *space, H5S_t *new_space, hsize_t *offset)
 herr_t
 H5S_select_iter_init(H5S_sel_iter_t *sel_iter, const H5S_t *space, size_t elmt_size)
 {
-    herr_t ret_value;   /* Return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1074,7 +1074,7 @@ H5S_select_iter_init(H5S_sel_iter_t *sel_iter, const H5S_t *space, size_t elmt_s
 herr_t
 H5S_select_iter_coords(const H5S_sel_iter_t *sel_iter, hsize_t *coords)
 {
-    herr_t ret_value;         /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1156,7 +1156,7 @@ H5S_select_iter_block(const H5S_sel_iter_t *iter, hsize_t *start, hsize_t *end)
 hsize_t
 H5S_select_iter_nelmts(const H5S_sel_iter_t *sel_iter)
 {
-    hsize_t ret_value;         /* return value */
+    hsize_t ret_value = 0;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1235,7 +1235,7 @@ H5S_select_iter_has_next_block(const H5S_sel_iter_t *iter)
 herr_t
 H5S_select_iter_next(H5S_sel_iter_t *iter, size_t nelem)
 {
-    herr_t ret_value;         /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1318,7 +1318,7 @@ H5S_select_iter_next_block(H5S_sel_iter_t *iter)
 herr_t
 H5S_select_iter_release(H5S_sel_iter_t *sel_iter)
 {
-    herr_t ret_value;         /* return value */
+    herr_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
@@ -1535,7 +1535,7 @@ done:
 H5S_sel_type
 H5S_get_select_type(const H5S_t *space)
 {
-    H5S_sel_type        ret_value;       /* Return value */
+    H5S_sel_type        ret_value = H5S_SEL_ERROR;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Stest.c b/src/H5Stest.c
index 62a4179..e1f4b61 100644
--- a/src/H5Stest.c
+++ b/src/H5Stest.c
@@ -19,7 +19,7 @@
  * Purpose:	Dataspace selection testing functions.
  */
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
+#include "H5Smodule.h"          /* This source code file is part of the H5S module */
 #define H5S_TESTING		/*suppress warning about H5S testing funcs*/
 
 
@@ -54,7 +54,7 @@ H5S_select_shape_same_test(hid_t sid1, hid_t sid2)
 {
     H5S_t	*space1;                /* Pointer to 1st dataspace */
     H5S_t	*space2;                /* Pointer to 2nd dataspace */
-    htri_t      ret_value;              /* Return value */
+    htri_t      ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -95,7 +95,7 @@ htri_t
 H5S_get_rebuild_status_test(hid_t space_id)
 {
     H5S_t *space;               /* Pointer to 1st dataspace */
-    htri_t ret_value;           /* Return value */
+    htri_t ret_value = FAIL;    /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5T.c b/src/H5T.c
index 5f6c8e3..1213bf7 100644
--- a/src/H5T.c
+++ b/src/H5T.c
@@ -1,4 +1,3 @@
-
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
  * Copyright by The HDF Group.                                               *
  * Copyright by the Board of Trustees of the University of Illinois.         *
@@ -25,10 +24,7 @@
 /* Module Setup */
 /****************/
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 /***********/
@@ -304,12 +300,15 @@ H5T_order_t H5T_native_order_g = H5T_ORDER_ERROR;
 /* Package Variables */
 /*********************/
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /*
  * Predefined data types. These are initialized at runtime in H5Tinit.c and
- * by H5T_init_interface() in this source file.
+ * by H5T__init_package() in this source file.
  *
  * If more of these are added, the new ones must be added to the list of
- * types to reset in H5T_term_interface().
+ * types to reset in H5T_term_package().
  */
 hid_t H5T_IEEE_F32BE_g			= FAIL;
 hid_t H5T_IEEE_F32LE_g			= FAIL;
@@ -529,6 +528,9 @@ static const H5I_class_t H5I_DATATYPE_CLS[1] = {{
     (H5I_free_t)H5T_close	/* Callback routine for closing objects of this class */
 }};
 
+/* Flag indicating "top" of interface has been initialized */
+static hbool_t H5T_top_package_initialize_s = FALSE;
+
 
 
 /*-------------------------------------------------------------------------
@@ -537,48 +539,42 @@ static const H5I_class_t H5I_DATATYPE_CLS[1] = {{
  * Purpose:	Initialize the interface from some other package.
  *
  * Return:	Success:	non-negative
- *
  *		Failure:	negative
  *
  * Programmer:	Robb Matzke
  *              Wednesday, December 16, 1998
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 herr_t
 H5T_init(void)
 {
-    herr_t ret_value=SUCCEED;   /* Return value */
+    herr_t ret_value = SUCCEED;   /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
     /* FUNC_ENTER() does all the work */
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}
+} /* end H5T_init() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5T_init_inf
+ * Function:	H5T__init_inf
  *
  * Purpose:	Initialize the +/- Infinity floating-poing values for type
  *              conversion.
  *
  * Return:	Success:	non-negative
- *
  *		Failure:	negative
  *
  * Programmer:	Quincey Koziol
  *              Saturday, November 22, 2003
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5T_init_inf(void)
+H5T__init_inf(void)
 {
     H5T_t	*dst_p;		/* Datatype type operate on */
     H5T_atomic_t *dst;		/* Datatype's atomic info */
@@ -587,7 +583,7 @@ H5T_init_inf(void)
     size_t      u;              /* Local index value */
     herr_t ret_value = SUCCEED; /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_STATIC
 
     /* Get the float datatype */
     if(NULL == (dst_p = (H5T_t *)H5I_object(H5T_NATIVE_FLOAT_g)))
@@ -673,63 +669,22 @@ H5T_init_inf(void)
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5T_init_inf() */
-
-
-/*-------------------------------------------------------------------------
- * Function:	H5T_init_hw
- *
- * Purpose:	Perform hardware specific [floating-point] initialization
- *
- * Return:	Success:	non-negative
- *		Failure:	negative
- *
- * Programmer:	Quincey Koziol
- *              Monday, November 24, 2003
- *
- *-------------------------------------------------------------------------
- */
-static herr_t
-H5T_init_hw(void)
-{
-#ifdef H5_HAVE_GET_FPC_CSR
-    union fpc_csr csr;          /* Union to hold results of floating-point status register query */
-#endif /* H5_HAVE_GET_FPC_CSR */
-    herr_t ret_value = SUCCEED;   /* Return value */
-
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-#ifdef H5_HAVE_GET_FPC_CSR
-    /* [This code is specific to SGI machines] */
-
-    /* Get the floating-point status register */
-    csr.fc_word = get_fpc_csr();
-
-    /* If the "flush denormalized values to zero" flag is set, unset it */
-    if(csr.fc_struct.flush) {
-        csr.fc_struct.flush = 0;
-        set_fpc_csr(csr.fc_word);
-    } /* end if */
-#endif /* H5_HAVE_GET_FPC_CSR */
-
-    FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5T_init_hw() */
+} /* end H5T__init_inf() */
 
 
 /*--------------------------------------------------------------------------
 NAME
-   H5T_init_interface -- Initialize interface-specific information
+   H5T__init_package -- Initialize interface-specific information
 USAGE
-    herr_t H5T_init_interface()
-
+    herr__t H5T_init_package()
 RETURNS
     Non-negative on success/Negative on failure
 DESCRIPTION
     Initializes any interface-specific data or routines.
 
 --------------------------------------------------------------------------*/
-static herr_t
-H5T_init_interface(void)
+herr_t
+H5T__init_package(void)
 {
     H5T_t       *native_schar=NULL;     /* Datatype structure for native signed char */
     H5T_t       *native_uchar=NULL;     /* Datatype structure for native unsigned char */
@@ -777,17 +732,13 @@ H5T_init_interface(void)
 
     /* Make certain there aren't too many classes of datatypes defined */
     /* Only 16 (numbered 0-15) are supported in the current file format */
-    HDassert(H5T_NCLASSES < 16);
-
-    /* Perform any necessary hardware initializations */
-    if(H5T_init_hw() < 0)
-	HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to initialize interface")
+    HDcompile_assert(H5T_NCLASSES < 16);
 
     /*
      * Initialize pre-defined native datatypes from code generated during
      * the library configuration by H5detect.
      */
-    if(H5TN_init_interface() < 0)
+    if(H5T__init_native() < 0)
 	HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to initialize interface")
 
     /* Get the atomic datatype structures needed by the initialization code below */
@@ -1004,7 +955,7 @@ H5T_init_interface(void)
 
     /* One-byte character string */
     H5T_INIT_TYPE(CSTRING, H5T_C_S1_g, ALLOC, -, SET, 1)
-    string=dt;    /* Keep type for later */
+    string = dt;    /* Keep type for later */
 
     /*------------------------------------------------------------
      * The `Fortran' architecture
@@ -1021,7 +972,7 @@ H5T_init_interface(void)
 
     /* Object reference (i.e. object header address in file) */
     H5T_INIT_TYPE(OBJREF, H5T_STD_REF_OBJ_g, ALLOC, -, SET, H5R_OBJ_REF_BUF_SIZE)
-    objref=dt;    /* Keep type for later */
+    objref = dt;    /* Keep type for later */
 
     /* Dataset Region reference (i.e. selection inside a dataset) */
     H5T_INIT_TYPE(REGREF, H5T_STD_REF_DSETREG_g, ALLOC, -, SET, H5R_DSET_REG_REF_BUF_SIZE)
@@ -1263,6 +1214,7 @@ H5T_init_interface(void)
     status |= H5T_register(H5T_PERS_HARD, "dbl_uint", native_double, native_uint, H5T__conv_double_uint, H5AC_ind_dxpl_id, FALSE);
     status |= H5T_register(H5T_PERS_HARD, "ldbl_uint", native_ldouble, native_uint, H5T__conv_ldouble_uint, H5AC_ind_dxpl_id, FALSE);
 
+    /* From floats to long */
     status |= H5T_register(H5T_PERS_HARD, "flt_long", native_float, native_long, H5T__conv_float_long, H5AC_ind_dxpl_id, FALSE);
     status |= H5T_register(H5T_PERS_HARD, "dbl_long", native_double, native_long, H5T__conv_double_long, H5AC_ind_dxpl_id, FALSE);
     status |= H5T_register(H5T_PERS_HARD, "ldbl_long", native_ldouble, native_long, H5T__conv_ldouble_long, H5AC_ind_dxpl_id, FALSE);
@@ -1294,13 +1246,13 @@ H5T_init_interface(void)
     status |= H5T_register(H5T_PERS_HARD, "no-op", native_int, native_int, H5T__conv_noop, H5AC_ind_dxpl_id, FALSE);
 
     /* Initialize the +/- Infinity values for floating-point types */
-    status |= H5T_init_inf();
+    status |= H5T__init_inf();
 
-    if (status<0)
+    if(status < 0)
 	HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to register conversion function(s)")
 
     /* Register datatype creation property class properties here.  See similar
-     * code in H5D_init_interface(), etc. for example.
+     * code in H5D__init_package(), etc. for example.
      */
 
     /* Only register the default property list if it hasn't been created yet */
@@ -1313,6 +1265,9 @@ H5T_init_interface(void)
              HGOTO_ERROR(H5E_PLIST, H5E_CANTREGISTER, FAIL, "can't insert property into class")
     } /* end if */
 
+    /* Mark "top" of interface as initialized, too */
+    H5T_top_package_initialize_s = TRUE;
+
 done:
     /* General cleanup */
     if(compound != NULL)
@@ -1338,11 +1293,11 @@ done:
     } /* end if */
 
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5T_init_interface() */
+} /* end H5T__init_package() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5T_unlock_cb
+ * Function:	H5T__unlock_cb
  *
  * Purpose:	Clear the immutable flag for a datatype.  This function is
  *		called when the library is closing in order to unlock all
@@ -1356,198 +1311,252 @@ done:
  *-------------------------------------------------------------------------
  */
 static int
-H5T_unlock_cb(void *_dt, hid_t H5_ATTR_UNUSED id, void H5_ATTR_UNUSED *key)
+H5T__unlock_cb(void *_dt, hid_t H5_ATTR_UNUSED id, void *_udata)
 {
     H5T_t	*dt = (H5T_t *)_dt;
+    int *n = (int *)_udata;
 
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
+    FUNC_ENTER_STATIC_NOERR
+
+    HDassert(dt && dt->shared);
 
-    HDassert (dt && dt->shared);
-    if (H5T_STATE_IMMUTABLE==dt->shared->state)
+    if(H5T_STATE_IMMUTABLE==dt->shared->state) {
 	dt->shared->state = H5T_STATE_RDONLY;
 
+        (*n)++;
+    } /* end if */
+
     FUNC_LEAVE_NOAPI(SUCCEED)
-} /* end H5T_unlock_cb() */
+} /* end H5T__unlock_cb() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5T_term_interface
+ * Function:	H5T_top_term_package
  *
- * Purpose:	Close this interface.
+ * Purpose:	Close the "top" of the interface, releasing IDs, etc.
  *
  * Return:	Success:	Positive if any action might have caused a
- *				change in some other interface; zero
- *				otherwise.
- *
+ *				change in some other interface; zero otherwise.
  * 		Failure:	Negative
  *
- * Programmer:	Robb Matzke
- *              Friday, November 20, 1998
+ * Programmer:	Quincey Koziol
+ *              Thursday, September 10, 2015
  *
  *-------------------------------------------------------------------------
  */
 int
-H5T_term_interface(void)
+H5T_top_term_package(void)
 {
     int	n = 0;
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
-        int i, nprint = 0;
-
+    if(H5T_top_package_initialize_s) {
 	/* Unregister all conversion functions */
-	for(i = 0; i < H5T_g.npaths; i++) {
-            H5T_path_t *path;
-
-	    path = H5T_g.path[i];
-	    HDassert(path);
-	    if(path->func) {
-		H5T__print_stats(path, &nprint/*in,out*/);
-		path->cdata.command = H5T_CONV_FREE;
-		if((path->func)((hid_t)FAIL, (hid_t)FAIL, &(path->cdata), (size_t)0,
-                        (size_t)0, (size_t)0, NULL, NULL,H5AC_ind_dxpl_id) < 0) {
+	if(H5T_g.path) {
+            int i, nprint = 0;
+
+            for(i = 0; i < H5T_g.npaths; i++) {
+                H5T_path_t *path;
+
+                path = H5T_g.path[i];
+                HDassert(path);
+                if(path->func) {
+                    H5T__print_stats(path, &nprint/*in,out*/);
+                    path->cdata.command = H5T_CONV_FREE;
+                    if((path->func)((hid_t)FAIL, (hid_t)FAIL, &(path->cdata), (size_t)0,
+                            (size_t)0, (size_t)0, NULL, NULL,H5AC_ind_dxpl_id) < 0) {
 #ifdef H5T_DEBUG
-		    if (H5DEBUG(T)) {
-			fprintf(H5DEBUG(T), "H5T: conversion function "
-				 "0x%08lx failed to free private data for "
-				 "%s (ignored)\n",
-				 (unsigned long)(path->func), path->name);
-		    } /* end if */
+                        if (H5DEBUG(T)) {
+                            fprintf(H5DEBUG(T), "H5T: conversion function "
+                                     "0x%08lx failed to free private data for "
+                                     "%s (ignored)\n",
+                                     (unsigned long)(path->func), path->name);
+                        } /* end if */
 #endif
-		    H5E_clear_stack(NULL); /*ignore the error*/
-		} /* end if */
-	    } /* end if */
+                        H5E_clear_stack(NULL); /*ignore the error*/
+                    } /* end if */
+                } /* end if */
 
-            if(path->src)
-                H5T_close(path->src);
-            if(path->dst)
-                H5T_close(path->dst);
-            path = H5FL_FREE(H5T_path_t, path);
-	    H5T_g.path[i] = NULL;
-	} /* end for */
+                if(path->src)
+                    H5T_close(path->src);
+                if(path->dst)
+                    H5T_close(path->dst);
+                path = H5FL_FREE(H5T_path_t, path);
+                H5T_g.path[i] = NULL;
+            } /* end for */
+
+            /* Clear conversion tables */
+            H5T_g.path = (H5T_path_t **)H5MM_xfree(H5T_g.path);
+            H5T_g.npaths = 0;
+            H5T_g.apaths = 0;
+            H5T_g.soft = (H5T_soft_t *)H5MM_xfree(H5T_g.soft);
+            H5T_g.nsoft = 0;
+            H5T_g.asoft = 0;
 
-	/* Clear conversion tables */
-	H5T_g.path = (H5T_path_t **)H5MM_xfree(H5T_g.path);
-	H5T_g.npaths = 0;
-	H5T_g.apaths = 0;
-	H5T_g.soft = (H5T_soft_t *)H5MM_xfree(H5T_g.soft);
-	H5T_g.nsoft = 0;
-	H5T_g.asoft = 0;
+            n++;
+        } /* end if */
 
 	/* Unlock all datatypes, then free them */
 	/* note that we are ignoring the return value from H5I_iterate() */
-	H5I_iterate(H5I_DATATYPE, H5T_unlock_cb, NULL, FALSE);
+        /* Also note that we are incrementing 'n' in the callback */
+	H5I_iterate(H5I_DATATYPE, H5T__unlock_cb, &n, FALSE);
 
-        /* Close deprecated interface */
-        n += H5T__term_deprec_interface();
-
-        /* Destroy the datatype object id group */
-	(void)H5I_dec_type_ref(H5I_DATATYPE);
-	n++; /*H5I*/
+        /* Release all datatype IDs */
+	if(H5I_nmembers(H5I_DATATYPE) > 0) {
+	    (void)H5I_clear_type(H5I_DATATYPE, FALSE, FALSE);
+            n++; /*H5I*/
+	} /* end if */
 
         /* Reset all the datatype IDs */
-        H5T_IEEE_F32BE_g			= FAIL;
-        H5T_IEEE_F32LE_g			= FAIL;
-        H5T_IEEE_F64BE_g			= FAIL;
-        H5T_IEEE_F64LE_g			= FAIL;
-
-        H5T_STD_I8BE_g			= FAIL;
-        H5T_STD_I8LE_g			= FAIL;
-        H5T_STD_I16BE_g			= FAIL;
-        H5T_STD_I16LE_g			= FAIL;
-        H5T_STD_I32BE_g			= FAIL;
-        H5T_STD_I32LE_g			= FAIL;
-        H5T_STD_I64BE_g			= FAIL;
-        H5T_STD_I64LE_g			= FAIL;
-        H5T_STD_U8BE_g			= FAIL;
-        H5T_STD_U8LE_g			= FAIL;
-        H5T_STD_U16BE_g			= FAIL;
-        H5T_STD_U16LE_g			= FAIL;
-        H5T_STD_U32BE_g			= FAIL;
-        H5T_STD_U32LE_g			= FAIL;
-        H5T_STD_U64BE_g			= FAIL;
-        H5T_STD_U64LE_g			= FAIL;
-        H5T_STD_B8BE_g			= FAIL;
-        H5T_STD_B8LE_g			= FAIL;
-        H5T_STD_B16BE_g			= FAIL;
-        H5T_STD_B16LE_g			= FAIL;
-        H5T_STD_B32BE_g			= FAIL;
-        H5T_STD_B32LE_g			= FAIL;
-        H5T_STD_B64BE_g			= FAIL;
-        H5T_STD_B64LE_g 			= FAIL;
-        H5T_STD_REF_OBJ_g 		= FAIL;
-        H5T_STD_REF_DSETREG_g 		= FAIL;
-
-        H5T_UNIX_D32BE_g			= FAIL;
-        H5T_UNIX_D32LE_g			= FAIL;
-        H5T_UNIX_D64BE_g			= FAIL;
-        H5T_UNIX_D64LE_g 			= FAIL;
-
-        H5T_C_S1_g			= FAIL;
-
-        H5T_FORTRAN_S1_g			= FAIL;
-
-        H5T_NATIVE_SCHAR_g		= FAIL;
-        H5T_NATIVE_UCHAR_g		= FAIL;
-        H5T_NATIVE_SHORT_g		= FAIL;
-        H5T_NATIVE_USHORT_g		= FAIL;
-        H5T_NATIVE_INT_g			= FAIL;
-        H5T_NATIVE_UINT_g			= FAIL;
-        H5T_NATIVE_LONG_g			= FAIL;
-        H5T_NATIVE_ULONG_g		= FAIL;
-        H5T_NATIVE_LLONG_g		= FAIL;
-        H5T_NATIVE_ULLONG_g		= FAIL;
-        H5T_NATIVE_FLOAT_g		= FAIL;
-        H5T_NATIVE_DOUBLE_g		= FAIL;
+        if(H5T_IEEE_F32BE_g > 0) {
+            H5T_IEEE_F32BE_g			= FAIL;
+            H5T_IEEE_F32LE_g			= FAIL;
+            H5T_IEEE_F64BE_g			= FAIL;
+            H5T_IEEE_F64LE_g			= FAIL;
+
+            H5T_STD_I8BE_g			= FAIL;
+            H5T_STD_I8LE_g			= FAIL;
+            H5T_STD_I16BE_g			= FAIL;
+            H5T_STD_I16LE_g			= FAIL;
+            H5T_STD_I32BE_g			= FAIL;
+            H5T_STD_I32LE_g			= FAIL;
+            H5T_STD_I64BE_g			= FAIL;
+            H5T_STD_I64LE_g			= FAIL;
+            H5T_STD_U8BE_g			= FAIL;
+            H5T_STD_U8LE_g			= FAIL;
+            H5T_STD_U16BE_g			= FAIL;
+            H5T_STD_U16LE_g			= FAIL;
+            H5T_STD_U32BE_g			= FAIL;
+            H5T_STD_U32LE_g			= FAIL;
+            H5T_STD_U64BE_g			= FAIL;
+            H5T_STD_U64LE_g			= FAIL;
+            H5T_STD_B8BE_g			= FAIL;
+            H5T_STD_B8LE_g			= FAIL;
+            H5T_STD_B16BE_g			= FAIL;
+            H5T_STD_B16LE_g			= FAIL;
+            H5T_STD_B32BE_g			= FAIL;
+            H5T_STD_B32LE_g			= FAIL;
+            H5T_STD_B64BE_g			= FAIL;
+            H5T_STD_B64LE_g 			= FAIL;
+            H5T_STD_REF_OBJ_g 			= FAIL;
+            H5T_STD_REF_DSETREG_g 		= FAIL;
+
+            H5T_UNIX_D32BE_g			= FAIL;
+            H5T_UNIX_D32LE_g			= FAIL;
+            H5T_UNIX_D64BE_g			= FAIL;
+            H5T_UNIX_D64LE_g 			= FAIL;
+
+            H5T_C_S1_g				= FAIL;
+
+            H5T_FORTRAN_S1_g			= FAIL;
+
+            H5T_NATIVE_SCHAR_g			= FAIL;
+            H5T_NATIVE_UCHAR_g			= FAIL;
+            H5T_NATIVE_SHORT_g			= FAIL;
+            H5T_NATIVE_USHORT_g			= FAIL;
+            H5T_NATIVE_INT_g			= FAIL;
+            H5T_NATIVE_UINT_g			= FAIL;
+            H5T_NATIVE_LONG_g			= FAIL;
+            H5T_NATIVE_ULONG_g			= FAIL;
+            H5T_NATIVE_LLONG_g			= FAIL;
+            H5T_NATIVE_ULLONG_g			= FAIL;
+            H5T_NATIVE_FLOAT_g			= FAIL;
+            H5T_NATIVE_DOUBLE_g			= FAIL;
 #if H5_SIZEOF_LONG_DOUBLE !=0
-        H5T_NATIVE_LDOUBLE_g		= FAIL;
+            H5T_NATIVE_LDOUBLE_g		= FAIL;
 #endif
-        H5T_NATIVE_B8_g			= FAIL;
-        H5T_NATIVE_B16_g			= FAIL;
-        H5T_NATIVE_B32_g			= FAIL;
-        H5T_NATIVE_B64_g			= FAIL;
-        H5T_NATIVE_OPAQUE_g		= FAIL;
-        H5T_NATIVE_HADDR_g		= FAIL;
-        H5T_NATIVE_HSIZE_g		= FAIL;
-        H5T_NATIVE_HSSIZE_g		= FAIL;
-        H5T_NATIVE_HERR_g			= FAIL;
-        H5T_NATIVE_HBOOL_g		= FAIL;
-
-        H5T_NATIVE_INT8_g			= FAIL;
-        H5T_NATIVE_UINT8_g		= FAIL;
-        H5T_NATIVE_INT_LEAST8_g		= FAIL;
-        H5T_NATIVE_UINT_LEAST8_g		= FAIL;
-        H5T_NATIVE_INT_FAST8_g		= FAIL;
-        H5T_NATIVE_UINT_FAST8_g		= FAIL;
-
-        H5T_NATIVE_INT16_g		= FAIL;
-        H5T_NATIVE_UINT16_g		= FAIL;
-        H5T_NATIVE_INT_LEAST16_g		= FAIL;
-        H5T_NATIVE_UINT_LEAST16_g		= FAIL;
-        H5T_NATIVE_INT_FAST16_g		= FAIL;
-        H5T_NATIVE_UINT_FAST16_g		= FAIL;
-
-        H5T_NATIVE_INT32_g		= FAIL;
-        H5T_NATIVE_UINT32_g		= FAIL;
-        H5T_NATIVE_INT_LEAST32_g		= FAIL;
-        H5T_NATIVE_UINT_LEAST32_g		= FAIL;
-        H5T_NATIVE_INT_FAST32_g		= FAIL;
-        H5T_NATIVE_UINT_FAST32_g		= FAIL;
-
-        H5T_NATIVE_INT64_g		= FAIL;
-        H5T_NATIVE_UINT64_g		= FAIL;
-        H5T_NATIVE_INT_LEAST64_g		= FAIL;
-        H5T_NATIVE_UINT_LEAST64_g		= FAIL;
-        H5T_NATIVE_INT_FAST64_g		= FAIL;
-        H5T_NATIVE_UINT_FAST64_g		= FAIL;
+            H5T_NATIVE_B8_g			= FAIL;
+            H5T_NATIVE_B16_g			= FAIL;
+            H5T_NATIVE_B32_g			= FAIL;
+            H5T_NATIVE_B64_g			= FAIL;
+            H5T_NATIVE_OPAQUE_g			= FAIL;
+            H5T_NATIVE_HADDR_g			= FAIL;
+            H5T_NATIVE_HSIZE_g			= FAIL;
+            H5T_NATIVE_HSSIZE_g			= FAIL;
+            H5T_NATIVE_HERR_g			= FAIL;
+            H5T_NATIVE_HBOOL_g			= FAIL;
+
+            H5T_NATIVE_INT8_g			= FAIL;
+            H5T_NATIVE_UINT8_g			= FAIL;
+            H5T_NATIVE_INT_LEAST8_g		= FAIL;
+            H5T_NATIVE_UINT_LEAST8_g		= FAIL;
+            H5T_NATIVE_INT_FAST8_g		= FAIL;
+            H5T_NATIVE_UINT_FAST8_g		= FAIL;
+
+            H5T_NATIVE_INT16_g			= FAIL;
+            H5T_NATIVE_UINT16_g			= FAIL;
+            H5T_NATIVE_INT_LEAST16_g		= FAIL;
+            H5T_NATIVE_UINT_LEAST16_g		= FAIL;
+            H5T_NATIVE_INT_FAST16_g		= FAIL;
+            H5T_NATIVE_UINT_FAST16_g		= FAIL;
+
+            H5T_NATIVE_INT32_g			= FAIL;
+            H5T_NATIVE_UINT32_g			= FAIL;
+            H5T_NATIVE_INT_LEAST32_g		= FAIL;
+            H5T_NATIVE_UINT_LEAST32_g		= FAIL;
+            H5T_NATIVE_INT_FAST32_g		= FAIL;
+            H5T_NATIVE_UINT_FAST32_g		= FAIL;
+
+            H5T_NATIVE_INT64_g			= FAIL;
+            H5T_NATIVE_UINT64_g			= FAIL;
+            H5T_NATIVE_INT_LEAST64_g		= FAIL;
+            H5T_NATIVE_UINT_LEAST64_g		= FAIL;
+            H5T_NATIVE_INT_FAST64_g		= FAIL;
+            H5T_NATIVE_UINT_FAST64_g		= FAIL;
+
+            n++;
+        } /* end if */
+
+	/* Mark "top" of interface as closed */
+        if(0 == n)
+            H5T_top_package_initialize_s = FALSE;
+    } /* end if */
+
+    FUNC_LEAVE_NOAPI(n)
+} /* end H5T_top_term_package() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:	H5T_term_package
+ *
+ * Purpose:	Close this interface.
+ *
+ * Note:	Finishes shutting down the interface, after
+ *		H5T_top_term_package() is called
+ *
+ * Return:	Success:	Positive if any action might have caused a
+ *				change in some other interface; zero
+ *				otherwise.
+ * 		Failure:	Negative
+ *
+ * Programmer:	Robb Matzke
+ *              Friday, November 20, 1998
+ *
+ *-------------------------------------------------------------------------
+ */
+int
+H5T_term_package(void)
+{
+    int	n = 0;
+
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+    if(H5_PKG_INIT_VAR) {
+        /* Sanity check */
+        HDassert(0 == H5I_nmembers(H5I_DATATYPE));
+        HDassert(FALSE == H5T_top_package_initialize_s);
+
+        /* Destroy the datatype object id group */
+	n += (H5I_dec_type_ref(H5I_DATATYPE) > 0);
 
 	/* Mark interface as closed */
-	H5_interface_initialize_g = 0;
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
     } /* end if */
 
     FUNC_LEAVE_NOAPI(n)
-} /* end H5T_term_interface() */
+} /* end H5T_term_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -1865,7 +1874,7 @@ done:
 H5T_class_t
 H5T_get_class(const H5T_t *dt, htri_t internal)
 {
-    H5T_class_t ret_value;
+    H5T_class_t ret_value = H5T_NO_CLASS;       /* Return value */
 
     FUNC_ENTER_NOAPI(H5T_NO_CLASS)
 
@@ -2912,8 +2921,8 @@ done:
 H5T_t *
 H5T_decode(const unsigned char *buf)
 {
-    H5F_t       *f = NULL;      /* Fake file structure*/
-    H5T_t       *ret_value;     /* Return value */
+    H5F_t *f = NULL;            /* Fake file structure*/
+    H5T_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -3116,7 +3125,7 @@ H5T_copy(H5T_t *old_dt, H5T_copy_t method)
     H5T_shared_t    *reopened_fo = NULL;
     unsigned	i;
     char	*s;
-    H5T_t	*ret_value;
+    H5T_t       *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -3445,7 +3454,7 @@ H5T_t *
 H5T__alloc(void)
 {
     H5T_t *dt = NULL;           /* Pointer to datatype allocated */
-    H5T_t *ret_value;           /* Return value */
+    H5T_t *ret_value = NULL;    /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -3532,21 +3541,23 @@ H5T__free(H5T_t *dt)
     switch(dt->shared->type) {
         case H5T_COMPOUND:
             for(i = 0; i < dt->shared->u.compnd.nmembs; i++) {
-                H5MM_xfree(dt->shared->u.compnd.memb[i].name);
+                dt->shared->u.compnd.memb[i].name = (char *)H5MM_xfree(dt->shared->u.compnd.memb[i].name);
                 H5T_close(dt->shared->u.compnd.memb[i].type);
             } /* end for */
-            H5MM_xfree(dt->shared->u.compnd.memb);
+            dt->shared->u.compnd.memb = (H5T_cmemb_t *)H5MM_xfree(dt->shared->u.compnd.memb);
+            dt->shared->u.compnd.nmembs = 0;
             break;
 
         case H5T_ENUM:
             for(i = 0; i < dt->shared->u.enumer.nmembs; i++)
-                H5MM_xfree(dt->shared->u.enumer.name[i]);
-            H5MM_xfree(dt->shared->u.enumer.name);
-            H5MM_xfree(dt->shared->u.enumer.value);
+                dt->shared->u.enumer.name[i] = (char *)H5MM_xfree(dt->shared->u.enumer.name[i]);
+            dt->shared->u.enumer.name = (char **)H5MM_xfree(dt->shared->u.enumer.name);
+            dt->shared->u.enumer.value = (uint8_t *)H5MM_xfree(dt->shared->u.enumer.value);
+            dt->shared->u.enumer.nmembs = 0;
             break;
 
         case H5T_OPAQUE:
-            H5MM_xfree(dt->shared->u.opaque.tag);
+            dt->shared->u.opaque.tag = (char *)H5MM_xfree(dt->shared->u.opaque.tag);
             break;
 
         case H5T_NO_CLASS:
@@ -3562,11 +3573,13 @@ H5T__free(H5T_t *dt)
         default:
             break;
     } /* end switch */
+    dt->shared->type = H5T_NO_CLASS;
 
     /* Close the parent */
     HDassert(dt->shared->parent != dt);
     if(dt->shared->parent && H5T_close(dt->shared->parent) < 0)
 	HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCLOSEOBJ, FAIL, "unable to close parent data type")
+    dt->shared->parent = NULL;
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
@@ -3641,7 +3654,7 @@ H5T_close(H5T_t *dt)
                     HGOTO_ERROR(H5E_DATATYPE, H5E_CANTRELEASE, FAIL, "problem attempting to free location")
         } /* end if */
 
-        /* Free the group hier. path since we're not calling H5T__free*/
+        /* Free the group hier. path since we're not calling H5T__free() */
         H5G_name_free(&(dt->path));
     } /* end else */
 
@@ -4375,7 +4388,7 @@ done:
  *              function like H5Tregister() is calling this function to
  *              register a new hard conversion function, IS_API is TRUE
  *              and the old path is replaced.  If a private function like
- *              H5T_init_interface() is trying to register hard conversions,
+ *              H5T__init_package() is trying to register hard conversions,
  *              IS_API is FALSE and the old hard path is not replaced.
  *              Tuesday, Sept 13, 2005
  *
@@ -4394,13 +4407,15 @@ H5T_path_find(const H5T_t *src, const H5T_t *dst, const char *name,
     hid_t	src_id = -1, dst_id = -1;	/*src and dst type identifiers	*/
     int	i;			/*counter			*/
     int	nprint = 0;		/*lines of output printed	*/
-    H5T_path_t	*ret_value;	/*return value			*/
+    H5T_path_t	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
     /* Sanity check */
     HDassert(src);
+    HDassert(src->shared);
     HDassert(dst);
+    HDassert(dst->shared);
 
     /*
      * Make sure the first entry in the table is the no-op conversion path.
@@ -4753,7 +4768,7 @@ static htri_t
 H5T_compiler_conv(H5T_t *src, H5T_t *dst)
 {
     H5T_path_t	*path;
-    htri_t	ret_value;
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -5045,7 +5060,7 @@ done:
 htri_t
 H5T_is_sensible(const H5T_t *dt)
 {
-    htri_t	ret_value;
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
diff --git a/src/H5TS.c b/src/H5TS.c
index d4b90db..987bead 100644
--- a/src/H5TS.c
+++ b/src/H5TS.c
@@ -62,7 +62,7 @@ static void
 H5TS_key_destructor(void *key_val)
 {
     /* Use HDfree here instead of H5MM_xfree(), to avoid calling the H5CS routines */
-    if(key_val!=NULL)
+    if(key_val != NULL)
         HDfree(key_val);
 }
 
@@ -91,7 +91,8 @@ H5TS_key_destructor(void *key_val)
 void
 H5TS_pthread_first_thread_init(void)
 {
-    H5_g.H5_libinit_g = FALSE;
+    H5_g.H5_libinit_g = FALSE;  /* Library hasn't been initialized */
+    H5_g.H5_libterm_g = FALSE;  /* Library isn't being shutdown */
 
 #ifdef H5_HAVE_WIN32_API
 # ifdef PTW32_STATIC_LIB
diff --git a/src/H5Tarray.c b/src/H5Tarray.c
index 752f2aa..4b2c7cf 100644
--- a/src/H5Tarray.c
+++ b/src/H5Tarray.c
@@ -22,10 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_array_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 /***********/
@@ -78,28 +75,6 @@
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_array_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_array_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_array_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_array_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5Tarray_create2
  *
@@ -179,8 +154,8 @@ done:
 H5T_t *
 H5T__array_create(H5T_t *base, unsigned ndims, const hsize_t dim[/* ndims */])
 {
-    H5T_t	*ret_value;	/* new array data type	*/
-    unsigned    u;              /* local index variable */
+    unsigned    u;                      /* Local index variable */
+    H5T_t	*ret_value = NULL;	/* New array data type	*/
 
     FUNC_ENTER_PACKAGE
 
diff --git a/src/H5Tbit.c b/src/H5Tbit.c
index 5322959..8c53066 100644
--- a/src/H5Tbit.c
+++ b/src/H5Tbit.c
@@ -19,7 +19,7 @@
  *		the bytes are in little-endian order.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/*generic functions			  */
@@ -261,7 +261,7 @@ H5T__bit_get_d(uint8_t *buf, size_t offset, size_t size)
 {
     uint64_t	val = 0;
     size_t	i, hs;
-    uint64_t	ret_value;      /* Return value */
+    uint64_t	ret_value = 0;  /* Return value */
 
     FUNC_ENTER_PACKAGE_NOERR
 
diff --git a/src/H5Tcommit.c b/src/H5Tcommit.c
index 024cc83..5ff1c73 100644
--- a/src/H5Tcommit.c
+++ b/src/H5Tcommit.c
@@ -22,10 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_commit_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 /***********/
@@ -83,28 +80,6 @@ static H5T_t *H5T_open_oid(const H5G_loc_t *loc, hid_t dxpl_id);
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_commit_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_commit_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_commit_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_commit_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5Tcommit2
  *
@@ -184,10 +159,10 @@ herr_t
 H5T__commit_named(const H5G_loc_t *loc, const char *name, H5T_t *dt,
     hid_t lcpl_id, hid_t tcpl_id, hid_t tapl_id, hid_t dxpl_id)
 {
-    H5O_obj_create_t ocrt_info;             /* Information for object creation */
-    H5T_obj_create_t tcrt_info;             /* Information for named datatype creation */
-    H5T_state_t old_state = H5T_STATE_TRANSIENT;        /* The state of the datatype before H5T__commit. */
-    herr_t      ret_value = SUCCEED;        /* Return value */
+    H5O_obj_create_t ocrt_info;         /* Information for object creation */
+    H5T_obj_create_t tcrt_info;         /* Information for named datatype creation */
+    H5T_state_t old_state;              /* The state of the datatype before H5T__commit. */
+    herr_t      ret_value = SUCCEED;    /* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -518,7 +493,7 @@ H5T_committed(const H5T_t *type)
 int
 H5T_link(const H5T_t *type, int adjust, hid_t dxpl_id)
 {
-    int ret_value;      /* Return value */
+    int ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -705,7 +680,7 @@ H5T_open(const H5G_loc_t *loc, hid_t dxpl_id)
 {
     H5T_shared_t   *shared_fo = NULL;
     H5T_t          *dt = NULL;
-    H5T_t          *ret_value;
+    H5T_t          *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -821,7 +796,7 @@ static H5T_t *
 H5T_open_oid(const H5G_loc_t *loc, hid_t dxpl_id)
 {
     H5T_t *dt = NULL;          /* Datatype from the file */
-    H5T_t *ret_value;          /* Return value */
+    H5T_t *ret_value = NULL;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Tcompound.c b/src/H5Tcompound.c
index b377b29..1342770 100644
--- a/src/H5Tcompound.c
+++ b/src/H5Tcompound.c
@@ -22,10 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_compound_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 /***********/
@@ -80,26 +77,6 @@ static htri_t H5T_is_packed(const H5T_t *dt);
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_compound_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_compound_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init() currently).
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_compound_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_compound_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5Tget_member_offset
  *
@@ -282,7 +259,7 @@ done:
 H5T_t *
 H5T_get_member_type(const H5T_t *dt, unsigned membno, H5T_copy_t method)
 {
-    H5T_t	*ret_value;     /* Return value */
+    H5T_t	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
diff --git a/src/H5Tconv.c b/src/H5Tconv.c
index 6847e68..8b96d22 100644
--- a/src/H5Tconv.c
+++ b/src/H5Tconv.c
@@ -21,7 +21,8 @@
 /* Module Setup */
 /****************/
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	     */
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
+
 
 /***********/
 /* Headers */
@@ -2111,7 +2112,7 @@ done:
 H5T_subset_info_t *
 H5T__conv_struct_subset(const H5T_cdata_t *cdata)
 {
-    H5T_conv_struct_t	*priv;
+    H5T_conv_struct_t	*priv = NULL;
 
     FUNC_ENTER_PACKAGE_NOERR
 
@@ -2925,7 +2926,7 @@ H5T__conv_enum(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts,
                     /* Use O(log N) lookup */
                     unsigned lt = 0;
                     unsigned rt = src->shared->u.enumer.nmembs;
-                    unsigned md;
+                    unsigned md = 0;
                     int cmp;
 
                     while(lt < rt) {
diff --git a/src/H5Tcset.c b/src/H5Tcset.c
index 33fb32a..95658ed 100644
--- a/src/H5Tcset.c
+++ b/src/H5Tcset.c
@@ -18,10 +18,7 @@
  *      the character set (cset) for the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_cset_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/*generic functions			  */
@@ -30,28 +27,6 @@
 #include "H5Tpkg.h"		/*data-type functions			  */
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_cset_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_cset_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_cset_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_cset_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5Tget_cset
  *
diff --git a/src/H5Tdbg.c b/src/H5Tdbg.c
index 717fc17..8a10cc6 100644
--- a/src/H5Tdbg.c
+++ b/src/H5Tdbg.c
@@ -28,7 +28,7 @@
 /* Module Setup */
 /****************/
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 /***********/
diff --git a/src/H5Tdeprec.c b/src/H5Tdeprec.c
index f1586bd..cd4de1d 100644
--- a/src/H5Tdeprec.c
+++ b/src/H5Tdeprec.c
@@ -31,10 +31,7 @@
 /* Module Setup */
 /****************/
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg   */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T__init_deprec_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 /***********/
@@ -84,51 +81,6 @@
 /*******************/
 
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T__init_deprec_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T__init_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init() currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T__init_deprec_interface(void)
-{
-    FUNC_ENTER_STATIC_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T__init_deprec_interface() */
-
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T__term_deprec_interface -- Terminate interface
-USAGE
-    herr_t H5T__term_deprec_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Terminates interface.  (Just resets H5_interface_initialize_g
-    currently).
-
---------------------------------------------------------------------------*/
-herr_t
-H5T__term_deprec_interface(void)
-{
-    FUNC_ENTER_PACKAGE_NOERR
-
-    /* Mark closed */
-    H5_interface_initialize_g = 0;
-
-    FUNC_LEAVE_NOAPI(0)
-} /* H5T__term_deprec_interface() */
-
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Tenum.c b/src/H5Tenum.c
index 2b7563b..e80d748 100644
--- a/src/H5Tenum.c
+++ b/src/H5Tenum.c
@@ -18,10 +18,7 @@
  *      in the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_enum_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/*generic functions			  */
@@ -36,27 +33,6 @@ static char *H5T_enum_nameof(const H5T_t *dt, const void *value, char *name/*out
 static herr_t H5T_enum_valueof(const H5T_t *dt, const char *name,
 				void *value/*out*/);
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_enum_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_enum_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_enum_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_enum_interface() */
 
 
 /*-------------------------------------------------------------------------
@@ -123,7 +99,7 @@ done:
 H5T_t *
 H5T__enum_create(const H5T_t *parent)
 {
-    H5T_t	*ret_value;		/*new enumeration data type	*/
+    H5T_t	*ret_value = NULL;	/* New enumeration data type	*/
 
     FUNC_ENTER_PACKAGE
 
@@ -416,7 +392,7 @@ H5T_enum_nameof(const H5T_t *dt, const void *value, char *name/*out*/, size_t si
     unsigned	lt, md = 0, rt;		/* Indices for binary search	*/
     int	        cmp = (-1);		/* Comparison result		*/
     hbool_t     alloc_name = FALSE;     /* Whether name has been allocated */
-    char        *ret_value;             /* Return value */
+    char        *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Tfields.c b/src/H5Tfields.c
index fb186fb..8818a73 100644
--- a/src/H5Tfields.c
+++ b/src/H5Tfields.c
@@ -18,10 +18,7 @@
  *      enumerated & compound datatypes in the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_fields_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/*generic functions			  */
@@ -31,28 +28,6 @@
 #include "H5Tpkg.h"		/*data-type functions			  */
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_fields_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_fields_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_fields_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_fields_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5Tget_nmembers
  *
@@ -117,7 +92,7 @@ done:
 int
 H5T_get_nmembers(const H5T_t *dt)
 {
-    int	ret_value;
+    int	ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI(FAIL)
 
@@ -199,7 +174,7 @@ done:
 char *
 H5T__get_member_name(H5T_t const *dt, unsigned membno)
 {
-    char	*ret_value;
+    char	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_PACKAGE
 
diff --git a/src/H5Tfixed.c b/src/H5Tfixed.c
index daa7886..62b8e79 100644
--- a/src/H5Tfixed.c
+++ b/src/H5Tfixed.c
@@ -18,10 +18,7 @@
  *      integer) datatypes in the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_fixed_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/*generic functions			  */
@@ -30,28 +27,6 @@
 #include "H5Tpkg.h"		/*data-type functions			  */
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_fixed_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_fixed_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_fixed_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_fixed_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5Tget_sign
  *
@@ -109,7 +84,7 @@ done:
 H5T_sign_t
 H5T_get_sign(H5T_t const *dt)
 {
-    H5T_sign_t		ret_value;
+    H5T_sign_t		ret_value = H5T_SGN_ERROR;      /* Return value */
 
     FUNC_ENTER_NOAPI(H5T_SGN_ERROR)
 
diff --git a/src/H5Tfloat.c b/src/H5Tfloat.c
index fff413d..b8b1c07 100644
--- a/src/H5Tfloat.c
+++ b/src/H5Tfloat.c
@@ -18,10 +18,7 @@
  *      datatypes in the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_float_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/*generic functions			  */
@@ -29,27 +26,6 @@
 #include "H5Iprivate.h"		/*ID functions		   		  */
 #include "H5Tpkg.h"		/*data-type functions			  */
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_float_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_float_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_float_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_float_interface() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Tmodule.h b/src/H5Tmodule.h
new file mode 100644
index 0000000..bfaab5e6
--- /dev/null
+++ b/src/H5Tmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5T package.  Including this header means that the source file
+ *		is part of the H5T package.
+ */
+#ifndef _H5Tmodule_H
+#define _H5Tmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5T_MODULE
+#define H5_MY_PKG       H5T
+#define H5_MY_PKG_ERR   H5E_DATATYPE
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Tmodule_H */
+
diff --git a/src/H5Tnative.c b/src/H5Tnative.c
index bf6ba08..229fe94 100644
--- a/src/H5Tnative.c
+++ b/src/H5Tnative.c
@@ -18,10 +18,7 @@
  *      a "native" datatype for the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_native_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -43,27 +40,6 @@ static H5T_t* H5T_get_native_bitfield(size_t prec, H5T_direction_t direction,
 static herr_t H5T_cmp_offset(size_t *comp_size, size_t *offset, size_t elem_size,
                          size_t nelems, size_t align, size_t *struct_align);
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_native_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_native_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_native_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_native_interface() */
 
 
 /*-------------------------------------------------------------------------
@@ -168,7 +144,7 @@ H5T_get_native_type(H5T_t *dtype, H5T_direction_t direction, size_t *struct_alig
     int         snmemb;             /* Number of members in compound & enum types */
     unsigned    nmemb = 0;          /* Number of members in compound & enum types */
     unsigned    u;                  /* Local index variable */
-    H5T_t       *ret_value;         /* Return value */
+    H5T_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -571,7 +547,7 @@ H5T_get_native_integer(size_t prec, H5T_sign_t sign, H5T_direction_t direction,
         H5T_NATIVE_INT_MATCH_LLONG,
         H5T_NATIVE_INT_MATCH_UNKNOWN
     } match = H5T_NATIVE_INT_MATCH_UNKNOWN;
-    H5T_t       *ret_value;     /* Return value */
+    H5T_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -711,7 +687,7 @@ H5T_get_native_float(size_t size, H5T_direction_t direction, size_t *struct_alig
 #endif
         H5T_NATIVE_FLOAT_MATCH_UNKNOWN
     } match=H5T_NATIVE_FLOAT_MATCH_UNKNOWN;
-    H5T_t       *ret_value;     /* Return value */
+    H5T_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -829,7 +805,7 @@ H5T_get_native_bitfield(size_t prec, H5T_direction_t direction, size_t *struct_a
     hid_t       tid=(-1);       /* Datatype ID of appropriate native datatype */
     size_t      align=0;        /* Alignment necessary for native datatype */
     size_t      native_size=0;  /* Datatype size of the native type */
-    H5T_t       *ret_value;     /* Return value */
+    H5T_t       *ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
diff --git a/src/H5Toffset.c b/src/H5Toffset.c
index ea4b3b5..cc45d8e 100644
--- a/src/H5Toffset.c
+++ b/src/H5Toffset.c
@@ -18,10 +18,7 @@
  *      the datatype offset for the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_offset_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -32,27 +29,6 @@
 /* Static local functions */
 static herr_t H5T_set_offset(const H5T_t *dt, size_t offset);
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_offset_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_offset_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_offset_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_offset_interface() */
 
 
 /*-------------------------------------------------------------------------
@@ -138,7 +114,7 @@ done:
 int
 H5T_get_offset(const H5T_t *dt)
 {
-    int	ret_value;
+    int	ret_value = -1;         /* Return value */
 
     FUNC_ENTER_NOAPI(-1)
 
diff --git a/src/H5Toh.c b/src/H5Toh.c
index abf8a51..9c8ad80 100644
--- a/src/H5Toh.c
+++ b/src/H5Toh.c
@@ -17,8 +17,8 @@
 /* Module Setup */
 /****************/
 
-#define H5O_PACKAGE		/*suppress error about including H5Opkg	  */
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 /***********/
@@ -102,7 +102,7 @@ const H5O_obj_class_t H5O_OBJ_DATATYPE[1] = {{
 static htri_t
 H5O_dtype_isa(struct H5O_t *oh)
 {
-    htri_t	ret_value;              /* Return value */
+    htri_t	ret_value = FAIL;       /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -133,7 +133,7 @@ static hid_t
 H5O_dtype_open(const H5G_loc_t *obj_loc, hid_t H5_ATTR_UNUSED lapl_id, hid_t dxpl_id, hbool_t app_ref)
 {
     H5T_t       *type = NULL;           /* Datatype opened */
-    hid_t	ret_value;              /* Return value */
+    hid_t	ret_value = H5I_INVALID_HID;    /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -173,7 +173,7 @@ static void *
 H5O_dtype_create(H5F_t *f, void *_crt_info, H5G_loc_t *obj_loc, hid_t dxpl_id)
 {
     H5T_obj_create_t *crt_info = (H5T_obj_create_t *)_crt_info; /* Named datatype creation parameters */
-    void *ret_value;            /* Return value */
+    void *ret_value = NULL;     /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -217,7 +217,7 @@ static H5O_loc_t *
 H5O_dtype_get_oloc(hid_t obj_id)
 {
     H5T_t       *type;                  /* Datatype opened */
-    H5O_loc_t	*ret_value;             /* Return value */
+    H5O_loc_t	*ret_value = NULL;      /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Topaque.c b/src/H5Topaque.c
index f37d14b..9cc22c9 100644
--- a/src/H5Topaque.c
+++ b/src/H5Topaque.c
@@ -18,10 +18,7 @@
  *      datatypes in the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_opaque_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -30,27 +27,6 @@
 #include "H5MMprivate.h"	/* Memory management			*/
 #include "H5Tpkg.h"		/* Datatypes				*/
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_opaque_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_opaque_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_opaque_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_opaque_interface() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Torder.c b/src/H5Torder.c
index 35be454..6c9c55c 100644
--- a/src/H5Torder.c
+++ b/src/H5Torder.c
@@ -22,10 +22,7 @@
 /* Module Setup */
 /****************/
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_order_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 /***********/
@@ -79,27 +76,6 @@ static herr_t H5T_set_order(H5T_t *dtype, H5T_order_t order);
 
 
 
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_order_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_order_interface()
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_order_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_order_interface() */
-
-
 /*-------------------------------------------------------------------------
  * Function:	H5Tget_order
  *
diff --git a/src/H5Tpad.c b/src/H5Tpad.c
index 38de494..e636a84 100644
--- a/src/H5Tpad.c
+++ b/src/H5Tpad.c
@@ -18,10 +18,7 @@
  *      the datatype padding for the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_pad_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -29,27 +26,6 @@
 #include "H5Iprivate.h"		/* IDs			  		*/
 #include "H5Tpkg.h"		/* Datatypes				*/
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_pad_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_pad_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_pad_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_pad_interface() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Tpkg.h b/src/H5Tpkg.h
index 0b0cd61..0bd1e06 100644
--- a/src/H5Tpkg.h
+++ b/src/H5Tpkg.h
@@ -21,7 +21,7 @@
  *		the H5T package.  Source files outside the H5T package should
  *		include H5Tprivate.h instead.
  */
-#ifndef H5T_PACKAGE
+#if !(defined H5T_FRIEND || defined H5T_MODULE)
 #error "Do not include this file outside the H5T package!"
 #endif
 
@@ -424,7 +424,7 @@ H5FL_EXTERN(H5T_t);
 H5FL_EXTERN(H5T_shared_t);
 
 /* Common functions */
-H5_DLL herr_t H5T__term_deprec_interface(void);
+H5_DLL herr_t H5T__init_native(void);
 H5_DLL H5T_t *H5T__create(H5T_class_t type, size_t size);
 H5_DLL herr_t H5T__commit(H5F_t *file, H5T_t *type, hid_t tcpl_id, hid_t dxpl_id);
 H5_DLL herr_t H5T__commit_named(const H5G_loc_t *loc, const char *name,
diff --git a/src/H5Tprecis.c b/src/H5Tprecis.c
index 73a4e32..be85491 100644
--- a/src/H5Tprecis.c
+++ b/src/H5Tprecis.c
@@ -18,10 +18,7 @@
  *      the datatype precision for the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_precis_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -32,27 +29,6 @@
 /* Static local functions */
 static herr_t H5T_set_precision(const H5T_t *dt, size_t prec);
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_precis_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_precis_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_precis_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_precis_interface() */
 
 
 /*-------------------------------------------------------------------------
@@ -119,7 +95,7 @@ done:
 size_t
 H5T_get_precision(const H5T_t *dt)
 {
-    size_t	ret_value;
+    size_t	ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI(0)
 
diff --git a/src/H5Tprivate.h b/src/H5Tprivate.h
index 558afaf..93fe599 100644
--- a/src/H5Tprivate.h
+++ b/src/H5Tprivate.h
@@ -34,17 +34,17 @@
 #define H5T_ELEM_BUF_SIZE       256
 
 /* If the module using this macro is allowed access to the private variables, access them directly */
-#ifdef H5T_PACKAGE
+#ifdef H5T_MODULE
 #define H5T_GET_SIZE(T)                 ((T)->shared->size)
 #define H5T_GET_SHARED(T)               ((T)->shared)
 #define H5T_GET_MEMBER_OFFSET(T, I)     ((T)->u.compnd.memb[I].offset)
 #define H5T_GET_MEMBER_SIZE(T, I)       ((T)->u.compnd.memb[I].shared->size)
-#else /* H5T_PACKAGE */
+#else /* H5T_MODULE */
 #define H5T_GET_SIZE(T)                 (H5T_get_size(T))
 #define H5T_GET_SHARED(T)               (H5T_get_shared(T))
 #define H5T_GET_MEMBER_OFFSET(T, I)     (H5T_get_member_offset((T), (I)))
 #define H5T_GET_MEMBER_SIZE(T, I)       (H5T_get_member_size((T), (I)))
-#endif /* H5T_PACKAGE */
+#endif /* H5T_MODULE */
 
 /* Forward references of package typedefs (declared in H5Tpkg.h) */
 typedef struct H5T_t H5T_t;
@@ -104,7 +104,6 @@ struct H5O_t;
 H5_DLLVAR H5T_order_t H5T_native_order_g;
 
 /* Private functions */
-H5_DLL herr_t H5TN_init_interface(void);
 H5_DLL herr_t H5T_init(void);
 H5_DLL H5T_t *H5T_copy(H5T_t *old_dt, H5T_copy_t method);
 H5_DLL herr_t H5T_lock(H5T_t *dt, hbool_t immutable);
diff --git a/src/H5Tstrpad.c b/src/H5Tstrpad.c
index c71827b..2cd1db4 100644
--- a/src/H5Tstrpad.c
+++ b/src/H5Tstrpad.c
@@ -18,10 +18,7 @@
  *      the datatype string padding for the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_strpad_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -29,27 +26,6 @@
 #include "H5Iprivate.h"		/* IDs			  		*/
 #include "H5Tpkg.h"		/* Datatypes				*/
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_strpad_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_strpad_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_strpad_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_strpad_interface() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5Tvisit.c b/src/H5Tvisit.c
index 4ede3f3..d732fb3 100644
--- a/src/H5Tvisit.c
+++ b/src/H5Tvisit.c
@@ -35,7 +35,7 @@
 /* Module Setup */
 /****************/
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	  */
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 /***********/
diff --git a/src/H5Tvlen.c b/src/H5Tvlen.c
index 64337b8..26346d6 100644
--- a/src/H5Tvlen.c
+++ b/src/H5Tvlen.c
@@ -18,10 +18,7 @@
  *      datatypes in the H5T interface.
  */
 
-#define H5T_PACKAGE		/*suppress error about including H5Tpkg	     */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5T_init_vlen_interface
+#include "H5Tmodule.h"          /* This source code file is part of the H5T module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -64,27 +61,6 @@ static H5T_vlen_alloc_info_t H5T_vlen_def_vl_alloc_info ={
     H5D_VLEN_FREE_INFO
 };
 
-
-/*--------------------------------------------------------------------------
-NAME
-   H5T_init_vlen_interface -- Initialize interface-specific information
-USAGE
-    herr_t H5T_init_vlen_interface()
-
-RETURNS
-    Non-negative on success/Negative on failure
-DESCRIPTION
-    Initializes any interface-specific data or routines.  (Just calls
-    H5T_init_iterface currently).
-
---------------------------------------------------------------------------*/
-static herr_t
-H5T_init_vlen_interface(void)
-{
-    FUNC_ENTER_NOAPI_NOINIT_NOERR
-
-    FUNC_LEAVE_NOAPI(H5T_init())
-} /* H5T_init_vlen_interface() */
 
 
 /*-------------------------------------------------------------------------
@@ -147,8 +123,8 @@ done:
 H5T_t *
 H5T__vlen_create(const H5T_t *base)
 {
-    H5T_t	*dt = NULL;		/*new VL datatype	*/
-    H5T_t	*ret_value;	/*return value			*/
+    H5T_t	*dt = NULL;		/* New VL datatype */
+    H5T_t	*ret_value = NULL;	/* Return value */
 
     FUNC_ENTER_PACKAGE
 
@@ -781,7 +757,7 @@ static ssize_t
 H5T_vlen_disk_getlen(const void *_vl)
 {
     const uint8_t *vl=(const uint8_t *)_vl; /* Pointer to the disk VL information */
-    size_t	seq_len;        /* Sequence length */
+    size_t	seq_len = 0;    /* Sequence length */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5Z.c b/src/H5Z.c
index 01f5216..87fc803 100644
--- a/src/H5Z.c
+++ b/src/H5Z.c
@@ -13,10 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
-
-/* Interface initialization */
-#define H5_INTERFACE_INIT_FUNC	H5Z_init_interface
+#include "H5Zmodule.h"          /* This source code file is part of the H5Z module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -57,6 +54,9 @@ typedef enum {
     H5Z_PRELUDE_SET_LOCAL       /* Call "set local" callback */
 } H5Z_prelude_type_t;
 
+/* Package initialization variable */
+hbool_t H5_PKG_INIT_VAR = FALSE;
+
 /* Local variables */
 static size_t		H5Z_table_alloc_g = 0;
 static size_t		H5Z_table_used_g = 0;
@@ -73,7 +73,7 @@ static int H5Z__flush_file_cb(void *obj_ptr, hid_t obj_id, void *key);
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5Z_init_interface
+ * Function:	H5Z__init_package
  *
  * Purpose:	Initializes the data filter layer.
  *
@@ -82,45 +82,43 @@ static int H5Z__flush_file_cb(void *obj_ptr, hid_t obj_id, void *key);
  * Programmer:	Robb Matzke
  *              Thursday, April 16, 1998
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
-static herr_t
-H5Z_init_interface (void)
+herr_t
+H5Z__init_package(void)
 {
-    herr_t	ret_value=SUCCEED;      /* Return value */
+    herr_t ret_value = SUCCEED;         /* Return value */
 
-    FUNC_ENTER_NOAPI_NOINIT
+    FUNC_ENTER_PACKAGE
 
     /* Internal filters */
-    if (H5Z_register (H5Z_SHUFFLE)<0)
-        HGOTO_ERROR (H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register shuffle filter")
-    if (H5Z_register (H5Z_FLETCHER32)<0)
-        HGOTO_ERROR (H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register fletcher32 filter")
-    if (H5Z_register (H5Z_NBIT)<0)
-        HGOTO_ERROR (H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register nbit filter")
-    if (H5Z_register (H5Z_SCALEOFFSET)<0)
-        HGOTO_ERROR (H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register scaleoffset filter")
+    if(H5Z_register(H5Z_SHUFFLE) < 0)
+        HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register shuffle filter")
+    if(H5Z_register(H5Z_FLETCHER32) < 0)
+        HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register fletcher32 filter")
+    if(H5Z_register(H5Z_NBIT) < 0)
+        HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register nbit filter")
+    if(H5Z_register(H5Z_SCALEOFFSET) < 0)
+        HGOTO_ERROR(H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register scaleoffset filter")
 
     /* External filters */
 #ifdef H5_HAVE_FILTER_DEFLATE
-    if (H5Z_register (H5Z_DEFLATE)<0)
+    if(H5Z_register(H5Z_DEFLATE) < 0)
         HGOTO_ERROR (H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register deflate filter")
 #endif /* H5_HAVE_FILTER_DEFLATE */
 #ifdef H5_HAVE_FILTER_SZIP
     H5Z_SZIP->encoder_present = SZ_encoder_enabled();
-    if (H5Z_register (H5Z_SZIP)<0)
+    if(H5Z_register(H5Z_SZIP) < 0)
         HGOTO_ERROR (H5E_PLINE, H5E_CANTINIT, FAIL, "unable to register szip filter")
 #endif /* H5_HAVE_FILTER_SZIP */
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
-}
+} /* end H5Z__init_package() */
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5Z_term_interface
+ * Function:	H5Z_term_package
  *
  * Purpose:	Terminate the H5Z layer.
  *
@@ -129,44 +127,44 @@ done:
  * Programmer:	Robb Matzke
  *              Thursday, April 16, 1998
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 int
-H5Z_term_interface(void)
+H5Z_term_package(void)
 {
-#ifdef H5Z_DEBUG
-    size_t	i;
-    int		dir, nprint=0;
-    char	comment[16], bandwidth[32];
-#endif
+    int	n = 0;
+
+    FUNC_ENTER_NOAPI_NOINIT_NOERR
 
-    if(H5_interface_initialize_g) {
+    if(H5_PKG_INIT_VAR) {
 #ifdef H5Z_DEBUG
-	if (H5DEBUG(Z)) {
-	    for (i=0; i<H5Z_table_used_g; i++) {
-		for (dir=0; dir<2; dir++) {
-		    if (0==H5Z_stat_table_g[i].stats[dir].total) continue;
+        char comment[16], bandwidth[32];
+        int dir, nprint = 0;
+        size_t i;
 
-		    if (0==nprint++) {
+	if(H5DEBUG(Z)) {
+	    for(i = 0; i < H5Z_table_used_g; i++) {
+		for(dir = 0; dir<2; dir++) {
+		    if(0 == H5Z_stat_table_g[i].stats[dir].total)
+                        continue;
+
+		    if(0 == nprint++) {
 			/* Print column headers */
-			HDfprintf (H5DEBUG(Z), "H5Z: filter statistics "
+			HDfprintf(H5DEBUG(Z), "H5Z: filter statistics "
 				   "accumulated over life of library:\n");
-			HDfprintf (H5DEBUG(Z),
+			HDfprintf(H5DEBUG(Z),
 				   "   %-16s %10s %10s %8s %8s %8s %10s\n",
 				   "Filter", "Total", "Errors", "User",
 				   "System", "Elapsed", "Bandwidth");
-			HDfprintf (H5DEBUG(Z),
+			HDfprintf(H5DEBUG(Z),
 				   "   %-16s %10s %10s %8s %8s %8s %10s\n",
 				   "------", "-----", "------", "----",
 				   "------", "-------", "---------");
-		    }
+		    } /* end if */
 
 		    /* Truncate the comment to fit in the field */
-		    HDstrncpy(comment, H5Z_table_g[i].name,
-			      sizeof comment);
-		    comment[sizeof(comment)-1] = '\0';
+		    HDstrncpy(comment, H5Z_table_g[i].name, sizeof comment);
+		    comment[sizeof(comment) - 1] = '\0';
 
 		    /*
 		     * Format bandwidth to have four significant digits and
@@ -178,7 +176,7 @@ H5Z_term_interface(void)
 				 H5Z_stat_table_g[i].stats[dir].timer.etime);
 
 		    /* Print the statistics */
-		    HDfprintf (H5DEBUG(Z),
+		    HDfprintf(H5DEBUG(Z),
 			       "   %s%-15s %10Hd %10Hd %8.2f %8.2f %8.2f "
 			       "%10s\n", dir?"<":">", comment,
 			       H5Z_stat_table_g[i].stats[dir].total,
@@ -187,21 +185,28 @@ H5Z_term_interface(void)
 			       H5Z_stat_table_g[i].stats[dir].timer.stime,
 			       H5Z_stat_table_g[i].stats[dir].timer.etime,
 			       bandwidth);
-		}
-	    }
-	}
+		} /* end for */
+	    } /* end for */
+	} /* end if */
 #endif /* H5Z_DEBUG */
 	/* Free the table of filters */
-	H5Z_table_g = (H5Z_class2_t *)H5MM_xfree(H5Z_table_g);
+        if(H5Z_table_g) {
+            H5Z_table_g = (H5Z_class2_t *)H5MM_xfree(H5Z_table_g);
 #ifdef H5Z_DEBUG
-	H5Z_stat_table_g = (H5Z_stats_t *)H5MM_xfree(H5Z_stat_table_g);
+            H5Z_stat_table_g = (H5Z_stats_t *)H5MM_xfree(H5Z_stat_table_g);
 #endif /* H5Z_DEBUG */
-	H5Z_table_used_g = H5Z_table_alloc_g = 0;
-	H5_interface_initialize_g = 0;
+            H5Z_table_used_g = H5Z_table_alloc_g = 0;
+
+            n++;
+        } /* end if */
+
+	/* Mark interface as closed */
+        if(0 == n)
+            H5_PKG_INIT_VAR = FALSE;
     } /* end if */
 
-    return(0);
-} /* end H5Z_term_interface() */
+    FUNC_LEAVE_NOAPI(n)
+} /* end H5Z_term_package() */
 
 
 /*-------------------------------------------------------------------------
@@ -825,8 +830,8 @@ H5Z_prepare_prelude_callback_dcpl(hid_t dcpl_id, hid_t type_id, H5Z_prelude_type
         if(NULL == (dc_plist = (H5P_genplist_t *)H5I_object(dcpl_id)))
             HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "can't get dataset creation property list")
 
-        /* Get layout information */
-        if(H5P_get(dc_plist, H5D_CRT_LAYOUT_NAME, &dcpl_layout) < 0)
+        /* Peek at the layout information */
+        if(H5P_peek(dc_plist, H5D_CRT_LAYOUT_NAME, &dcpl_layout) < 0)
             HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't retrieve layout")
 
         /* Check if the dataset is chunked */
@@ -834,7 +839,7 @@ H5Z_prepare_prelude_callback_dcpl(hid_t dcpl_id, hid_t type_id, H5Z_prelude_type
             H5O_pline_t     dcpl_pline;     /* Object's I/O pipeline information */
 
             /* Get I/O pipeline information */
-            if(H5P_get(dc_plist, H5O_CRT_PIPELINE_NAME, &dcpl_pline) < 0)
+            if(H5P_peek(dc_plist, H5O_CRT_PIPELINE_NAME, &dcpl_pline) < 0)
                 HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't retrieve pipeline filter")
 
             /* Check if the chunks have filters */
@@ -1445,8 +1450,8 @@ done:
 H5Z_filter_info_t *
 H5Z_filter_info(const H5O_pline_t *pline, H5Z_filter_t filter)
 {
-    size_t	idx;                    /* Index of filter in pipeline */
-    H5Z_filter_info_t *ret_value;       /* Return value */
+    size_t	idx;                            /* Index of filter in pipeline */
+    H5Z_filter_info_t *ret_value = NULL;        /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
diff --git a/src/H5Zdeflate.c b/src/H5Zdeflate.c
index 06d9866..15aac27 100644
--- a/src/H5Zdeflate.c
+++ b/src/H5Zdeflate.c
@@ -18,7 +18,7 @@
  *              Friday, August 27, 1999
  */
 
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
+#include "H5Zmodule.h"          /* This source code file is part of the H5Z module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -77,7 +77,7 @@ H5Z_filter_deflate (unsigned flags, size_t cd_nelmts,
 {
     void	*outbuf = NULL;         /* Pointer to new buffer */
     int		status;                 /* Status from zlib operation */
-    size_t	ret_value;              /* Return value */
+    size_t	ret_value = 0;          /* Return value */
 
     FUNC_ENTER_NOAPI(0)
 
diff --git a/src/H5Zfletcher32.c b/src/H5Zfletcher32.c
index 1877ddd..690d7a2 100644
--- a/src/H5Zfletcher32.c
+++ b/src/H5Zfletcher32.c
@@ -14,11 +14,11 @@
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 /*
- * Programmer:  Raymond Lu<slu@ncsa.uiuc.edu>
+ * Programmer:  Raymond Lu <slu@ncsa.uiuc.edu>
  *              Jan 3, 2003
  */
 
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
+#include "H5Zmodule.h"          /* This source code file is part of the H5Z module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -81,7 +81,7 @@ H5Z_filter_fletcher32 (unsigned flags, size_t H5_ATTR_UNUSED cd_nelmts, const un
     uint32_t reversed_fletcher; /* Possible wrong checksum value */
     uint8_t  c[4];
     uint8_t  tmp;
-    size_t   ret_value;         /* Return value */
+    size_t   ret_value = 0;     /* Return value */
 
     FUNC_ENTER_NOAPI(0)
 
diff --git a/src/H5Zmodule.h b/src/H5Zmodule.h
new file mode 100644
index 0000000..fa0ef8f
--- /dev/null
+++ b/src/H5Zmodule.h
@@ -0,0 +1,35 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Programmer:	Quincey Koziol <koziol@hdfgroup.org>
+ *		Saturday, September 12, 2015
+ *
+ * Purpose:	This file contains declarations which define macros for the
+ *		H5Z package.  Including this header means that the source file
+ *		is part of the H5Z package.
+ */
+#ifndef _H5Zmodule_H
+#define _H5Zmodule_H
+
+/* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error
+ *      reporting macros.
+ */
+#define H5Z_MODULE
+#define H5_MY_PKG       H5Z
+#define H5_MY_PKG_ERR   H5E_PLINE
+#define H5_MY_PKG_INIT  YES
+
+#endif /* _H5Zmodule_H */
+
diff --git a/src/H5Znbit.c b/src/H5Znbit.c
index 479cd6c..e2fb300 100644
--- a/src/H5Znbit.c
+++ b/src/H5Znbit.c
@@ -13,7 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
+#include "H5Zmodule.h"          /* This source code file is part of the H5Z module */
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5Eprivate.h"		/* Error handling		  	*/
diff --git a/src/H5Zpkg.h b/src/H5Zpkg.h
index e2cec89..aa2ffe2 100644
--- a/src/H5Zpkg.h
+++ b/src/H5Zpkg.h
@@ -13,7 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#ifndef H5Z_PACKAGE
+#if !(defined H5Z_FRIEND || defined H5Z_MODULE)
 #error "Do not include this file outside the H5Z package!"
 #endif
 
diff --git a/src/H5Zscaleoffset.c b/src/H5Zscaleoffset.c
index 46dd3c1..7de0060 100644
--- a/src/H5Zscaleoffset.c
+++ b/src/H5Zscaleoffset.c
@@ -13,7 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
+#include "H5Zmodule.h"          /* This source code file is part of the H5Z module */
 
 #include "H5private.h"		/* Generic Functions			*/
 #include "H5ACprivate.h"	/* Metadata cache			*/
@@ -746,7 +746,7 @@ static enum H5Z_scaleoffset_t
 H5Z_scaleoffset_get_type(unsigned dtype_class, unsigned dtype_size, unsigned dtype_sign)
 {
     enum H5Z_scaleoffset_t type = t_bad; /* integer type */
-    enum H5Z_scaleoffset_t ret_value;             /* return value */
+    enum H5Z_scaleoffset_t ret_value = t_bad;   /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
diff --git a/src/H5Zshuffle.c b/src/H5Zshuffle.c
index 654a7d5..3fa6c8d 100644
--- a/src/H5Zshuffle.c
+++ b/src/H5Zshuffle.c
@@ -13,7 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
+#include "H5Zmodule.h"          /* This source code file is part of the H5Z module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -135,7 +135,7 @@ H5Z_filter_shuffle(unsigned flags, size_t cd_nelmts, const unsigned cd_values[],
     size_t j;                   /* Local index variable */
 #endif /* NO_DUFFS_DEVICE */
     size_t leftover;            /* Extra bytes at end of buffer */
-    size_t ret_value;           /* Return value */
+    size_t ret_value = 0;       /* Return value */
 
     FUNC_ENTER_NOAPI(0)
 
diff --git a/src/H5Zszip.c b/src/H5Zszip.c
index f0d08d8..2c2ed07 100644
--- a/src/H5Zszip.c
+++ b/src/H5Zszip.c
@@ -13,7 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
+#include "H5Zmodule.h"          /* This source code file is part of the H5Z module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
diff --git a/src/H5Ztrans.c b/src/H5Ztrans.c
index db61cc5..42d6ceb 100644
--- a/src/H5Ztrans.c
+++ b/src/H5Ztrans.c
@@ -13,7 +13,7 @@
  * access to either file, you may request a copy from help@hdfgroup.org.     *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-#define H5Z_PACKAGE		/*suppress error about including H5Zpkg	  */
+#include "H5Zmodule.h"          /* This source code file is part of the H5Z module */
 
 
 #include "H5private.h"		/* Generic Functions			*/
@@ -255,8 +255,14 @@ static void H5Z_print(H5Z_node *tree, FILE *stream);
     else                                                                                                                \
     {                                                                                                                   \
         ret_value->type = (TYPE);                                                                                       \
-        ret_value->lchild = (H5Z_node*) H5Z_xform_copy_tree(tree->lchild, dat_val_pointers, new_dat_val_pointers);      \
-        ret_value->rchild = (H5Z_node*) H5Z_xform_copy_tree(tree->rchild, dat_val_pointers, new_dat_val_pointers);      \
+        if(tree->lchild)												\
+            ret_value->lchild = (H5Z_node*) H5Z_xform_copy_tree(tree->lchild, dat_val_pointers, new_dat_val_pointers);  \
+        else														\
+            ret_value->lchild = NULL;											\
+        if(tree->rchild)												\
+            ret_value->rchild = (H5Z_node*) H5Z_xform_copy_tree(tree->rchild, dat_val_pointers, new_dat_val_pointers);  \
+        else														\
+            ret_value->rchild = NULL;											\
     }                                                                                                                   \
 }
 
@@ -542,7 +548,7 @@ static void *
 H5Z_xform_parse(const char *expression, H5Z_datval_ptrs* dat_val_pointers)
 {
     H5Z_token tok;
-    void* ret_value;
+    void *ret_value = NULL;             /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -581,7 +587,7 @@ static H5Z_node *
 H5Z_parse_expression(H5Z_token *current, H5Z_datval_ptrs* dat_val_pointers)
 {
     H5Z_node *expr;
-    H5Z_node *ret_value;        /* Return value */
+    H5Z_node *ret_value = NULL;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -675,7 +681,7 @@ static H5Z_node *
 H5Z_parse_term(H5Z_token *current, H5Z_datval_ptrs* dat_val_pointers)
 {
     H5Z_node *term = NULL;
-    H5Z_node *ret_value;
+    H5Z_node *ret_value = NULL;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -775,7 +781,7 @@ H5Z_parse_factor(H5Z_token *current, H5Z_datval_ptrs* dat_val_pointers)
 {
     H5Z_node 	*factor=NULL;
     H5Z_node 	*new_node;
-    H5Z_node    *ret_value;
+    H5Z_node    *ret_value = NULL;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -787,7 +793,7 @@ H5Z_parse_factor(H5Z_token *current, H5Z_datval_ptrs* dat_val_pointers)
 
             if (!factor)
                     HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "Unable to allocate new node")
-                sscanf(current->tok_begin, "%ld", &factor->value.int_val);
+            sscanf(current->tok_begin, "%ld", &factor->value.int_val);
             break;
 
         case H5Z_XFORM_FLOAT:
@@ -795,7 +801,7 @@ H5Z_parse_factor(H5Z_token *current, H5Z_datval_ptrs* dat_val_pointers)
 
             if (!factor)
                     HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "Unable to allocate new node")
-                sscanf(current->tok_begin, "%lf", &factor->value.float_val);
+            sscanf(current->tok_begin, "%lf", &factor->value.float_val);
             break;
 
         case H5Z_XFORM_SYMBOL:
@@ -804,7 +810,7 @@ H5Z_parse_factor(H5Z_token *current, H5Z_datval_ptrs* dat_val_pointers)
             if (!factor)
                     HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "Unable to allocate new node")
 
-                factor->value.dat_val = &(dat_val_pointers->ptr_dat_val[dat_val_pointers->num_ptrs]);
+            factor->value.dat_val = &(dat_val_pointers->ptr_dat_val[dat_val_pointers->num_ptrs]);
             dat_val_pointers->num_ptrs++;
             break;
 
@@ -814,11 +820,11 @@ H5Z_parse_factor(H5Z_token *current, H5Z_datval_ptrs* dat_val_pointers)
             if (!factor)
                     HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "Unable to allocate new node")
 
-                current = H5Z_get_token(current);
+            current = H5Z_get_token(current);
 
             if (current->tok_type != H5Z_XFORM_RPAREN) {
-            H5Z_xform_destroy_parse_tree(factor);
-            HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "Syntax error in data transform expression")
+                H5Z_xform_destroy_parse_tree(factor);
+                HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "Syntax error in data transform expression")
             }
             break;
 
@@ -917,7 +923,7 @@ done:
 static H5Z_node *
 H5Z_new_node(H5Z_token_type type)
 {
-    H5Z_node *ret_value;
+    H5Z_node *ret_value = NULL;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
 
@@ -1296,14 +1302,11 @@ H5Z_xform_copy_tree(H5Z_node* tree, H5Z_datval_ptrs* dat_val_pointers, H5Z_datva
         H5Z_XFORM_DO_OP4(H5Z_XFORM_MINUS)
     else if(tree->type == H5Z_XFORM_DIVIDE)
         H5Z_XFORM_DO_OP4(H5Z_XFORM_DIVIDE)
-
     else
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "Error in parse tree while trying to copy")
 
-
-
-            done:
-            FUNC_LEAVE_NOAPI(ret_value)
+done:
+    FUNC_LEAVE_NOAPI(ret_value)
 }
 
 
@@ -1477,10 +1480,10 @@ H5Z_do_op(H5Z_node* tree)
 H5Z_data_xform_t *
 H5Z_xform_create(const char *expr)
 {
-    H5Z_data_xform_t *data_xform_prop=NULL;
-    H5Z_data_xform_t *ret_value;
+    H5Z_data_xform_t *data_xform_prop = NULL;
     unsigned int i;
     unsigned int count = 0;
+    H5Z_data_xform_t *ret_value = NULL;         /* Return value */
 
     FUNC_ENTER_NOAPI(NULL)
 
@@ -1513,7 +1516,7 @@ H5Z_xform_create(const char *expr)
      * of the data we have for polynomial transforms */
     data_xform_prop->dat_val_pointers->num_ptrs = 0;
 
-     /* we generate the parse tree right here and store a poitner to its root in the property. */
+     /* we generate the parse tree right here and store a pointer to its root in the property. */
     if((data_xform_prop->parse_root = (H5Z_node *)H5Z_xform_parse(expr, data_xform_prop->dat_val_pointers))==NULL)
         HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "unable to generate parse tree from expression")
 
@@ -1609,8 +1612,6 @@ H5Z_xform_destroy(H5Z_data_xform_t *data_xform_prop)
  *      after the top-level copy has been performed and this routine finishes
  *      the "deep" part of the copy.
  *
- * Modifications:
- *
  *-------------------------------------------------------------------------
  */
 herr_t
@@ -1696,7 +1697,7 @@ done:
 hbool_t
 H5Z_xform_noop(const H5Z_data_xform_t *data_xform_prop)
 {
-    hbool_t ret_value;
+    hbool_t ret_value = FALSE;          /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT_NOERR
 
diff --git a/src/H5config.h.in b/src/H5config.h.in
deleted file mode 100644
index 9363813..0000000
--- a/src/H5config.h.in
+++ /dev/null
@@ -1,641 +0,0 @@
-/* src/H5config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define if building universal (internal helper macro) */
-#undef AC_APPLE_UNIVERSAL_BUILD
-
-/* Define if the memory buffers being written to disk should be cleared before
-   writing. */
-#undef CLEAR_MEMORY
-
-/* Define if C++ compiler recognizes offsetof */
-#undef CXX_HAVE_OFFSETOF
-
-/* Define the default plugins path to compile */
-#undef DEFAULT_PLUGINDIR
-
-/* Define if `dev_t' is a scalar */
-#undef DEV_T_IS_SCALAR
-
-/* Define to dummy `main' function (if any) required to link to the Fortran
-   libraries. */
-#undef FC_DUMMY_MAIN
-
-/* Define if F77 and FC dummy `main' functions are identical. */
-#undef FC_DUMMY_MAIN_EQ_F77
-
-/* Define to a macro mangling the given C identifier (in lower and upper
-   case), which must not contain underscores, for linking with Fortran. */
-#undef FC_FUNC
-
-/* As FC_FUNC, but for C identifiers containing underscores. */
-#undef FC_FUNC_
-
-/* Define if Fortran C_LONG_DOUBLE is different from C_DOUBLE */
-#undef FORTRAN_C_LONG_DOUBLE_IS_UNIQUE
-
-/* Define if we have Fortran C_LONG_DOUBLE */
-#undef FORTRAN_HAVE_C_LONG_DOUBLE
-
-/* Define if we have Fortran intrinsic C_SIZEOF */
-#undef FORTRAN_HAVE_C_SIZEOF
-
-/* Define if we have Fortran intrinsic SIZEOF */
-#undef FORTRAN_HAVE_SIZEOF
-
-/* Define if we have Fortran intrinsic STORAGE_SIZE */
-#undef FORTRAN_HAVE_STORAGE_SIZE
-
-/* Determine the size of C long double */
-#undef FORTRAN_SIZEOF_LONG_DOUBLE
-
-/* Define Fortran compiler ID */
-#undef Fortran_COMPILER_ID
-
-/* Define valid Fortran INTEGER KINDs */
-#undef H5CONFIG_F_IKIND
-
-/* Define number of valid Fortran INTEGER KINDs */
-#undef H5CONFIG_F_NUM_IKIND
-
-/* Define number of valid Fortran REAL KINDs */
-#undef H5CONFIG_F_NUM_RKIND
-
-/* Define valid Fortran REAL KINDs */
-#undef H5CONFIG_F_RKIND
-
-/* Define valid Fortran REAL KINDs Sizeof */
-#undef H5CONFIG_F_RKIND_SIZEOF
-
-/* Define to 1 if you have the `alarm' function. */
-#undef HAVE_ALARM
-
-/* Define to 1 if you have the `asprintf' function. */
-#undef HAVE_ASPRINTF
-
-/* Define if the __attribute__(()) extension is present */
-#undef HAVE_ATTRIBUTE
-
-/* Define if the compiler understands C99 designated initialization of structs
-   and unions */
-#undef HAVE_C99_DESIGNATED_INITIALIZER
-
-/* Define if the compiler understands the __func__ keyword */
-#undef HAVE_C99_FUNC
-
-/* Define to 1 if you have the `clock_gettime' function. */
-#undef HAVE_CLOCK_GETTIME
-
-/* Define if the function stack tracing code is to be compiled in */
-#undef HAVE_CODESTACK
-
-/* Define if Darwin or Mac OS X */
-#undef HAVE_DARWIN
-
-/* Define to 1 if you have the `difftime' function. */
-#undef HAVE_DIFFTIME
-
-/* Define if the direct I/O virtual file driver (VFD) should be compiled */
-#undef HAVE_DIRECT
-
-/* Define to 1 if you have the <dirent.h> header file. */
-#undef HAVE_DIRENT_H
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <dmalloc.h> header file. */
-#undef HAVE_DMALLOC_H
-
-/* Define if library information should be embedded in the executables */
-#undef HAVE_EMBEDDED_LIBINFO
-
-/* Define to 1 if you have the <features.h> header file. */
-#undef HAVE_FEATURES_H
-
-/* Define if support for deflate (zlib) filter is enabled */
-#undef HAVE_FILTER_DEFLATE
-
-/* Define if support for szip filter is enabled */
-#undef HAVE_FILTER_SZIP
-
-/* Determine if __float128 is available */
-#undef HAVE_FLOAT128
-
-/* Define to 1 if you have the `fork' function. */
-#undef HAVE_FORK
-
-/* Define to 1 if you have the `frexpf' function. */
-#undef HAVE_FREXPF
-
-/* Define to 1 if you have the `frexpl' function. */
-#undef HAVE_FREXPL
-
-/* Define to 1 if you have the `fseeko' function. */
-#undef HAVE_FSEEKO
-
-/* Define to 1 if you have the `fseeko64' function. */
-#undef HAVE_FSEEKO64
-
-/* Define to 1 if you have the `fstat64' function. */
-#undef HAVE_FSTAT64
-
-/* Define to 1 if you have the `ftello' function. */
-#undef HAVE_FTELLO
-
-/* Define to 1 if you have the `ftello64' function. */
-#undef HAVE_FTELLO64
-
-/* Define to 1 if you have the `ftruncate64' function. */
-#undef HAVE_FTRUNCATE64
-
-/* Define if the compiler understands the __FUNCTION__ keyword */
-#undef HAVE_FUNCTION
-
-/* Determine if INTEGER*16 is available */
-#undef HAVE_Fortran_INTEGER_SIZEOF_16
-
-/* Define to 1 if you have the `GetConsoleScreenBufferInfo' function. */
-#undef HAVE_GETCONSOLESCREENBUFFERINFO
-
-/* Define to 1 if you have the `gethostname' function. */
-#undef HAVE_GETHOSTNAME
-
-/* Define to 1 if you have the `getpwuid' function. */
-#undef HAVE_GETPWUID
-
-/* Define to 1 if you have the `getrusage' function. */
-#undef HAVE_GETRUSAGE
-
-/* Define to 1 if you have the `gettextinfo' function. */
-#undef HAVE_GETTEXTINFO
-
-/* Define to 1 if you have the `gettimeofday' function. */
-#undef HAVE_GETTIMEOFDAY
-
-/* Define if the compiler understands inline */
-#undef HAVE_INLINE
-
-/* Define if library will contain instrumentation to detect correct
-   optimization operation */
-#undef HAVE_INSTRUMENTED_LIBRARY
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `ioctl' function. */
-#undef HAVE_IOCTL
-
-/* Define to 1 if you have the <io.h> header file. */
-#undef HAVE_IO_H
-
-/* Define to 1 if you have the `dl' library (-ldl). */
-#undef HAVE_LIBDL
-
-/* Define to 1 if you have the `dmalloc' library (-ldmalloc). */
-#undef HAVE_LIBDMALLOC
-
-/* Define to 1 if you have the `m' library (-lm). */
-#undef HAVE_LIBM
-
-/* Define to 1 if you have the `mpe' library (-lmpe). */
-#undef HAVE_LIBMPE
-
-/* Define to 1 if you have the `pthread' library (-lpthread). */
-#undef HAVE_LIBPTHREAD
-
-/* Define to 1 if you have the `sz' library (-lsz). */
-#undef HAVE_LIBSZ
-
-/* Define to 1 if you have the `ws2_32' library (-lws2_32). */
-#undef HAVE_LIBWS2_32
-
-/* Define to 1 if you have the `z' library (-lz). */
-#undef HAVE_LIBZ
-
-/* Define to 1 if you have the `longjmp' function. */
-#undef HAVE_LONGJMP
-
-/* Define to 1 if you have the `lseek64' function. */
-#undef HAVE_LSEEK64
-
-/* Define to 1 if you have the `lstat' function. */
-#undef HAVE_LSTAT
-
-/* Define to 1 if you have the <mach/mach_time.h> header file. */
-#undef HAVE_MACH_MACH_TIME_H
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define if we have MPE support */
-#undef HAVE_MPE
-
-/* Define to 1 if you have the <mpe.h> header file. */
-#undef HAVE_MPE_H
-
-/* Define if `MPI_Comm_c2f' and `MPI_Comm_f2c' exists */
-#undef HAVE_MPI_MULTI_LANG_Comm
-
-/* Define if `MPI_Info_c2f' and `MPI_Info_f2c' exists */
-#undef HAVE_MPI_MULTI_LANG_Info
-
-/* Define if we have parallel support */
-#undef HAVE_PARALLEL
-
-/* Define to 1 if you have the <pthread.h> header file. */
-#undef HAVE_PTHREAD_H
-
-/* Define to 1 if you have the <quadmath.h> header file. */
-#undef HAVE_QUADMATH_H
-
-/* Define to 1 if you have the `random' function. */
-#undef HAVE_RANDOM
-
-/* Define to 1 if you have the `rand_r' function. */
-#undef HAVE_RAND_R
-
-/* Define to 1 if you have the `setjmp' function. */
-#undef HAVE_SETJMP
-
-/* Define to 1 if you have the <setjmp.h> header file. */
-#undef HAVE_SETJMP_H
-
-/* Define to 1 if you have the `setsysinfo' function. */
-#undef HAVE_SETSYSINFO
-
-/* Define to 1 if you have the `siglongjmp' function. */
-#undef HAVE_SIGLONGJMP
-
-/* Define to 1 if you have the `signal' function. */
-#undef HAVE_SIGNAL
-
-/* Define to 1 if you have the `sigprocmask' function. */
-#undef HAVE_SIGPROCMASK
-
-/* Define to 1 if you have the `sigsetjmp' function. */
-#undef HAVE_SIGSETJMP
-
-/* Define to 1 if you have the `snprintf' function. */
-#undef HAVE_SNPRINTF
-
-/* Define to 1 if you have the `srandom' function. */
-#undef HAVE_SRANDOM
-
-/* Define to 1 if you have the `stat64' function. */
-#undef HAVE_STAT64
-
-/* Define if `struct stat' has the `st_blocks' field */
-#undef HAVE_STAT_ST_BLOCKS
-
-/* Define to 1 if you have the <stddef.h> header file. */
-#undef HAVE_STDDEF_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strdup' function. */
-#undef HAVE_STRDUP
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define if `struct text_info' is defined */
-#undef HAVE_STRUCT_TEXT_INFO
-
-/* Define if `struct videoconfig' is defined */
-#undef HAVE_STRUCT_VIDEOCONFIG
-
-/* Define to 1 if you have the `symlink' function. */
-#undef HAVE_SYMLINK
-
-/* Define to 1 if you have the `system' function. */
-#undef HAVE_SYSTEM
-
-/* Define to 1 if you have the <sys/ioctl.h> header file. */
-#undef HAVE_SYS_IOCTL_H
-
-/* Define to 1 if you have the <sys/resource.h> header file. */
-#undef HAVE_SYS_RESOURCE_H
-
-/* Define to 1 if you have the <sys/socket.h> header file. */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/timeb.h> header file. */
-#undef HAVE_SYS_TIMEB_H
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <szlib.h> header file. */
-#undef HAVE_SZLIB_H
-
-/* Define if we have thread safe support */
-#undef HAVE_THREADSAFE
-
-/* Define if `timezone' is a global variable */
-#undef HAVE_TIMEZONE
-
-/* Define if the ioctl TIOCGETD is defined */
-#undef HAVE_TIOCGETD
-
-/* Define if the ioctl TIOGWINSZ is defined */
-#undef HAVE_TIOCGWINSZ
-
-/* Define to 1 if you have the `tmpfile' function. */
-#undef HAVE_TMPFILE
-
-/* Define if `tm_gmtoff' is a member of `struct tm' */
-#undef HAVE_TM_GMTOFF
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `vasprintf' function. */
-#undef HAVE_VASPRINTF
-
-/* Define to 1 if you have the `vsnprintf' function. */
-#undef HAVE_VSNPRINTF
-
-/* Define to 1 if you have the `waitpid' function. */
-#undef HAVE_WAITPID
-
-/* Define if your system has window style path name. */
-#undef HAVE_WINDOW_PATH
-
-/* Define to 1 if you have the <winsock2.h> header file. */
-#undef HAVE_WINSOCK2_H
-
-/* Define to 1 if you have the <zlib.h> header file. */
-#undef HAVE_ZLIB_H
-
-/* Define to 1 if you have the `_getvideoconfig' function. */
-#undef HAVE__GETVIDEOCONFIG
-
-/* Define to 1 if you have the `_scrsize' function. */
-#undef HAVE__SCRSIZE
-
-/* Define if the compiler understands __inline */
-#undef HAVE___INLINE
-
-/* Define if the compiler understands __inline__ */
-#undef HAVE___INLINE__
-
-/* Define if HDF5's high-level library headers should be included in hdf5.h */
-#undef INCLUDE_HL
-
-/* Define if your system can convert long double to (unsigned) long long
-   values correctly. */
-#undef LDOUBLE_TO_LLONG_ACCURATE
-
-/* Define if your system converts long double to (unsigned) long values with
-   special algorithm. */
-#undef LDOUBLE_TO_LONG_SPECIAL
-
-/* Define if your system can convert (unsigned) long long to long double
-   values correctly. */
-#undef LLONG_TO_LDOUBLE_CORRECT
-
-/* Define if your system can convert (unsigned) long to long double values
-   with special algorithm. */
-#undef LONG_TO_LDOUBLE_SPECIAL
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
-#undef LT_OBJDIR
-
-/* Define if the metadata trace file code is to be compiled in */
-#undef METADATA_TRACE_FILE
-
-/* Define if we can violate pointer alignment restrictions */
-#undef NO_ALIGNMENT_RESTRICTIONS
-
-/* Define if deprecated public API symbols are disabled */
-#undef NO_DEPRECATED_SYMBOLS
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Determine the maximum decimal precision in C */
-#undef PAC_C_MAX_REAL_PRECISION
-
-/* Define Fortran Maximum Real Decimal Precision */
-#undef PAC_FC_MAX_REAL_PRECISION
-
-/* Width for printf() for type `long long' or `__int64', use `ll' */
-#undef PRINTF_LL_WIDTH
-
-/* The size of `char', as computed by sizeof. */
-#undef SIZEOF_CHAR
-
-/* The size of `double', as computed by sizeof. */
-#undef SIZEOF_DOUBLE
-
-/* The size of `float', as computed by sizeof. */
-#undef SIZEOF_FLOAT
-
-/* The size of `int', as computed by sizeof. */
-#undef SIZEOF_INT
-
-/* The size of `int16_t', as computed by sizeof. */
-#undef SIZEOF_INT16_T
-
-/* The size of `int32_t', as computed by sizeof. */
-#undef SIZEOF_INT32_T
-
-/* The size of `int64_t', as computed by sizeof. */
-#undef SIZEOF_INT64_T
-
-/* The size of `int8_t', as computed by sizeof. */
-#undef SIZEOF_INT8_T
-
-/* The size of `int_fast16_t', as computed by sizeof. */
-#undef SIZEOF_INT_FAST16_T
-
-/* The size of `int_fast32_t', as computed by sizeof. */
-#undef SIZEOF_INT_FAST32_T
-
-/* The size of `int_fast64_t', as computed by sizeof. */
-#undef SIZEOF_INT_FAST64_T
-
-/* The size of `int_fast8_t', as computed by sizeof. */
-#undef SIZEOF_INT_FAST8_T
-
-/* The size of `int_least16_t', as computed by sizeof. */
-#undef SIZEOF_INT_LEAST16_T
-
-/* The size of `int_least32_t', as computed by sizeof. */
-#undef SIZEOF_INT_LEAST32_T
-
-/* The size of `int_least64_t', as computed by sizeof. */
-#undef SIZEOF_INT_LEAST64_T
-
-/* The size of `int_least8_t', as computed by sizeof. */
-#undef SIZEOF_INT_LEAST8_T
-
-/* The size of `long', as computed by sizeof. */
-#undef SIZEOF_LONG
-
-/* The size of `long double', as computed by sizeof. */
-#undef SIZEOF_LONG_DOUBLE
-
-/* The size of `long long', as computed by sizeof. */
-#undef SIZEOF_LONG_LONG
-
-/* The size of `off64_t', as computed by sizeof. */
-#undef SIZEOF_OFF64_T
-
-/* The size of `off_t', as computed by sizeof. */
-#undef SIZEOF_OFF_T
-
-/* The size of `ptrdiff_t', as computed by sizeof. */
-#undef SIZEOF_PTRDIFF_T
-
-/* The size of `short', as computed by sizeof. */
-#undef SIZEOF_SHORT
-
-/* The size of `size_t', as computed by sizeof. */
-#undef SIZEOF_SIZE_T
-
-/* The size of `ssize_t', as computed by sizeof. */
-#undef SIZEOF_SSIZE_T
-
-/* The size of `uint16_t', as computed by sizeof. */
-#undef SIZEOF_UINT16_T
-
-/* The size of `uint32_t', as computed by sizeof. */
-#undef SIZEOF_UINT32_T
-
-/* The size of `uint64_t', as computed by sizeof. */
-#undef SIZEOF_UINT64_T
-
-/* The size of `uint8_t', as computed by sizeof. */
-#undef SIZEOF_UINT8_T
-
-/* The size of `uint_fast16_t', as computed by sizeof. */
-#undef SIZEOF_UINT_FAST16_T
-
-/* The size of `uint_fast32_t', as computed by sizeof. */
-#undef SIZEOF_UINT_FAST32_T
-
-/* The size of `uint_fast64_t', as computed by sizeof. */
-#undef SIZEOF_UINT_FAST64_T
-
-/* The size of `uint_fast8_t', as computed by sizeof. */
-#undef SIZEOF_UINT_FAST8_T
-
-/* The size of `uint_least16_t', as computed by sizeof. */
-#undef SIZEOF_UINT_LEAST16_T
-
-/* The size of `uint_least32_t', as computed by sizeof. */
-#undef SIZEOF_UINT_LEAST32_T
-
-/* The size of `uint_least64_t', as computed by sizeof. */
-#undef SIZEOF_UINT_LEAST64_T
-
-/* The size of `uint_least8_t', as computed by sizeof. */
-#undef SIZEOF_UINT_LEAST8_T
-
-/* The size of `unsigned', as computed by sizeof. */
-#undef SIZEOF_UNSIGNED
-
-/* The size of `_Quad', as computed by sizeof. */
-#undef SIZEOF__QUAD
-
-/* The size of `__float128', as computed by sizeof. */
-#undef SIZEOF___FLOAT128
-
-/* The size of `__int64', as computed by sizeof. */
-#undef SIZEOF___INT64
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define if strict file format checks are enabled */
-#undef STRICT_FORMAT_CHECKS
-
-/* Define if your system supports pthread_attr_setscope(&attribute,
-   PTHREAD_SCOPE_SYSTEM) call. */
-#undef SYSTEM_SCOPE_THREADS
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Define using v1.6 public API symbols by default */
-#undef USE_16_API_DEFAULT
-
-/* Define if a memory checking tool will be used on the library, to cause
-   library to be very picky about memory operations and also disable the
-   internal free list manager code. */
-#undef USING_MEMCHECKER
-
-/* Version number of package */
-#undef VERSION
-
-/* Data accuracy is prefered to speed during data conversions */
-#undef WANT_DATA_ACCURACY
-
-/* Check exception handling functions during data conversions */
-#undef WANT_DCONV_EXCEPTION
-
-/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
-   significant byte first (like Motorola and SPARC, unlike Intel). */
-#if defined AC_APPLE_UNIVERSAL_BUILD
-# if defined __BIG_ENDIAN__
-#  define WORDS_BIGENDIAN 1
-# endif
-#else
-# ifndef WORDS_BIGENDIAN
-#  undef WORDS_BIGENDIAN
-# endif
-#endif
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `long int' if <sys/types.h> does not define. */
-#undef off_t
-
-/* Define to `long' if <sys/types.h> does not define. */
-#undef ptrdiff_t
-
-/* Define to `unsigned long' if <sys/types.h> does not define. */
-#undef size_t
-
-/* Define to `long' if <sys/types.h> does not define. */
-#undef ssize_t
diff --git a/src/H5detect.c b/src/H5detect.c
index 5daf883..ee02c52 100644
--- a/src/H5detect.c
+++ b/src/H5detect.c
@@ -608,7 +608,7 @@ print_results(int nd, detected_t *d, int na, malign_t *misc_align)
 /* Module Setup */\n\
 /****************/\n\
 \n\
-#define H5T_PACKAGE /*suppress error about including H5Tpkg.h*/\n\
+#include \"H5Tmodule.h\"          /* This source code file is part of the H5T module */\n\
 \n\
 \n\
 /***********/\n\
@@ -667,7 +667,7 @@ print_results(int nd, detected_t *d, int na, malign_t *misc_align)
     printf("\n\
 \n\
 /*-------------------------------------------------------------------------\n\
- * Function:	H5TN_init_interface\n\
+ * Function:	H5T__init_native\n\
  *\n\
  * Purpose:	Initialize pre-defined native datatypes from code generated\n\
  *              during the library configuration by H5detect.\n\
@@ -681,12 +681,12 @@ print_results(int nd, detected_t *d, int na, malign_t *misc_align)
  *-------------------------------------------------------------------------\n\
  */\n\
 herr_t\n\
-H5TN_init_interface(void)\n\
+H5T__init_native(void)\n\
 {\n\
     H5T_t	*dt = NULL;\n\
     herr_t	ret_value = SUCCEED;\n\
 \n\
-    FUNC_ENTER_NOAPI(FAIL)\n");
+    FUNC_ENTER_PACKAGE\n");
 
     for(i = 0; i < nd; i++) {
         /* The native endianess of this machine */
@@ -809,7 +809,7 @@ done:\n\
         } /* end if */\n\
     } /* end if */\n\
 \n\
-    FUNC_LEAVE_NOAPI(ret_value);\n} /* end H5TN_init_interface() */\n");
+    FUNC_LEAVE_NOAPI(ret_value);\n} /* end H5T__init_native() */\n");
 
     /* Print the ALIGNMENT and signal-handling status as comments */
     printf("\n"
diff --git a/src/H5overflow.h b/src/H5overflow.h
deleted file mode 100644
index dc4ed2d..0000000
--- a/src/H5overflow.h
+++ /dev/null
@@ -1,2254 +0,0 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group.                                               *
- * Copyright by the Board of Trustees of the University of Illinois.         *
- * All rights reserved.                                                      *
- *                                                                           *
- * This file is part of HDF5.  The full HDF5 copyright notice, including     *
- * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-/* Generated automatically by bin/make_overflow -- do not edit */
-/* Add new types to H5overflow.txt file */
-
-
-#ifndef _H5overflow_H
-#define _H5overflow_H
-
-
-/* Each type in this file is tested for assignment to the other types,
- *      and range checks are defined for bad assignments at run-time.
- */
-
-/* Assignment checks for unsigned */
-
-/* src: unsigned, dst: int */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_INT
-    #define ASSIGN_unsigned_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_INT
-    #define ASSIGN_unsigned_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_INT */
-    #define ASSIGN_unsigned_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: int */
-
-/* src: unsigned, dst: int64_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_INT64_T
-    #define ASSIGN_unsigned_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_INT64_T
-    #define ASSIGN_unsigned_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_INT64_T */
-    #define ASSIGN_unsigned_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: int64_t */
-
-/* src: unsigned, dst: uint8_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_UINT8_T
-    #define ASSIGN_unsigned_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_UINT8_T
-    #define ASSIGN_unsigned_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_unsigned_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: uint8_t */
-
-/* src: unsigned, dst: uint16_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_UINT16_T
-    #define ASSIGN_unsigned_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_UINT16_T
-    #define ASSIGN_unsigned_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_unsigned_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: uint16_t */
-
-/* src: unsigned, dst: uint32_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_UINT32_T
-    #define ASSIGN_unsigned_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_UINT32_T
-    #define ASSIGN_unsigned_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_unsigned_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: uint32_t */
-
-/* src: unsigned, dst: uint64_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_UINT64_T
-    #define ASSIGN_unsigned_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_UINT64_T
-    #define ASSIGN_unsigned_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_unsigned_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: uint64_t */
-
-/* src: unsigned, dst: ptrdiff_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_unsigned_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_unsigned_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_unsigned_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: ptrdiff_t */
-
-/* src: unsigned, dst: size_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_SIZE_T
-    #define ASSIGN_unsigned_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_SIZE_T
-    #define ASSIGN_unsigned_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_unsigned_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: size_t */
-
-/* src: unsigned, dst: ssize_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_unsigned_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_unsigned_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_unsigned_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: ssize_t */
-
-/* src: unsigned, dst: haddr_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_HADDR_T
-    #define ASSIGN_unsigned_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_HADDR_T
-    #define ASSIGN_unsigned_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_unsigned_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: haddr_t */
-
-/* src: unsigned, dst: hsize_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_unsigned_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_unsigned_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_unsigned_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: hsize_t */
-
-/* src: unsigned, dst: hssize_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_unsigned_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_unsigned_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_unsigned_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: hssize_t */
-
-/* src: unsigned, dst: h5_stat_size_t */
-#if H5_SIZEOF_UNSIGNED < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_unsigned_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UNSIGNED > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_unsigned_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UNSIGNED == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_unsigned_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: unsigned dst: h5_stat_size_t */
-
-
-/* Assignment checks for int */
-
-/* src: int, dst: unsigned */
-#if H5_SIZEOF_INT < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_int_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_int_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_int_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: unsigned */
-
-/* src: int, dst: int64_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_INT64_T
-    #define ASSIGN_int_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_INT64_T
-    #define ASSIGN_int_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_INT64_T */
-    #define ASSIGN_int_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: int64_t */
-
-/* src: int, dst: uint8_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_UINT8_T
-    #define ASSIGN_int_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_UINT8_T
-    #define ASSIGN_int_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_int_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: uint8_t */
-
-/* src: int, dst: uint16_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_UINT16_T
-    #define ASSIGN_int_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_UINT16_T
-    #define ASSIGN_int_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_int_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: uint16_t */
-
-/* src: int, dst: uint32_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_UINT32_T
-    #define ASSIGN_int_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_UINT32_T
-    #define ASSIGN_int_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_int_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: uint32_t */
-
-/* src: int, dst: uint64_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_UINT64_T
-    #define ASSIGN_int_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_UINT64_T
-    #define ASSIGN_int_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_int_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: uint64_t */
-
-/* src: int, dst: ptrdiff_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_int_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_int_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_int_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: ptrdiff_t */
-
-/* src: int, dst: size_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_SIZE_T
-    #define ASSIGN_int_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_SIZE_T
-    #define ASSIGN_int_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_int_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: size_t */
-
-/* src: int, dst: ssize_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_int_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_int_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_int_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: ssize_t */
-
-/* src: int, dst: haddr_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_HADDR_T
-    #define ASSIGN_int_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_HADDR_T
-    #define ASSIGN_int_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_int_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: haddr_t */
-
-/* src: int, dst: hsize_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_int_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_int_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_int_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: hsize_t */
-
-/* src: int, dst: hssize_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_int_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_int_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_int_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: hssize_t */
-
-/* src: int, dst: h5_stat_size_t */
-#if H5_SIZEOF_INT < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_int_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_int_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_int_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int dst: h5_stat_size_t */
-
-
-/* Assignment checks for int64_t */
-
-/* src: int64_t, dst: unsigned */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_int64_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_int64_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_int64_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: unsigned */
-
-/* src: int64_t, dst: int */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_INT
-    #define ASSIGN_int64_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_INT
-    #define ASSIGN_int64_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_INT */
-    #define ASSIGN_int64_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: int */
-
-/* src: int64_t, dst: uint8_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_int64_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_int64_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_int64_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: uint8_t */
-
-/* src: int64_t, dst: uint16_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_int64_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_int64_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_int64_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: uint16_t */
-
-/* src: int64_t, dst: uint32_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_int64_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_int64_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_int64_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: uint32_t */
-
-/* src: int64_t, dst: uint64_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_int64_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_int64_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_int64_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: uint64_t */
-
-/* src: int64_t, dst: ptrdiff_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_int64_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_int64_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_int64_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: ptrdiff_t */
-
-/* src: int64_t, dst: size_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_int64_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_int64_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_int64_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: size_t */
-
-/* src: int64_t, dst: ssize_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_int64_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_int64_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_int64_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: ssize_t */
-
-/* src: int64_t, dst: haddr_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_int64_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_int64_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_int64_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: haddr_t */
-
-/* src: int64_t, dst: hsize_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_int64_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_int64_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_int64_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: hsize_t */
-
-/* src: int64_t, dst: hssize_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_int64_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_int64_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_int64_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: hssize_t */
-
-/* src: int64_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_INT64_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_int64_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_INT64_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_int64_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_INT64_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_int64_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: int64_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for uint8_t */
-
-/* src: uint8_t, dst: unsigned */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_uint8_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_uint8_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_uint8_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: unsigned */
-
-/* src: uint8_t, dst: int */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_INT
-    #define ASSIGN_uint8_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_INT
-    #define ASSIGN_uint8_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_INT */
-    #define ASSIGN_uint8_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: int */
-
-/* src: uint8_t, dst: int64_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_uint8_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_uint8_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_uint8_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: int64_t */
-
-/* src: uint8_t, dst: uint16_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_uint8_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_uint8_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_uint8_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: uint16_t */
-
-/* src: uint8_t, dst: uint32_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_uint8_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_uint8_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_uint8_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: uint32_t */
-
-/* src: uint8_t, dst: uint64_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_uint8_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_uint8_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_uint8_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: uint64_t */
-
-/* src: uint8_t, dst: ptrdiff_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_uint8_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_uint8_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_uint8_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: ptrdiff_t */
-
-/* src: uint8_t, dst: size_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_uint8_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_uint8_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_uint8_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: size_t */
-
-/* src: uint8_t, dst: ssize_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_uint8_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_uint8_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_uint8_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: ssize_t */
-
-/* src: uint8_t, dst: haddr_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_uint8_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_uint8_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_uint8_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: haddr_t */
-
-/* src: uint8_t, dst: hsize_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_uint8_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_uint8_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_uint8_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: hsize_t */
-
-/* src: uint8_t, dst: hssize_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_uint8_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_uint8_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_uint8_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: hssize_t */
-
-/* src: uint8_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_UINT8_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_uint8_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT8_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_uint8_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT8_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_uint8_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint8_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for uint16_t */
-
-/* src: uint16_t, dst: unsigned */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_uint16_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_uint16_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_uint16_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: unsigned */
-
-/* src: uint16_t, dst: int */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_INT
-    #define ASSIGN_uint16_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_INT
-    #define ASSIGN_uint16_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_INT */
-    #define ASSIGN_uint16_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: int */
-
-/* src: uint16_t, dst: int64_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_uint16_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_uint16_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_uint16_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: int64_t */
-
-/* src: uint16_t, dst: uint8_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_uint16_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_uint16_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_uint16_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: uint8_t */
-
-/* src: uint16_t, dst: uint32_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_uint16_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_uint16_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_uint16_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: uint32_t */
-
-/* src: uint16_t, dst: uint64_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_uint16_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_uint16_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_uint16_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: uint64_t */
-
-/* src: uint16_t, dst: ptrdiff_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_uint16_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_uint16_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_uint16_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: ptrdiff_t */
-
-/* src: uint16_t, dst: size_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_uint16_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_uint16_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_uint16_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: size_t */
-
-/* src: uint16_t, dst: ssize_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_uint16_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_uint16_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_uint16_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: ssize_t */
-
-/* src: uint16_t, dst: haddr_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_uint16_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_uint16_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_uint16_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: haddr_t */
-
-/* src: uint16_t, dst: hsize_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_uint16_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_uint16_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_uint16_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: hsize_t */
-
-/* src: uint16_t, dst: hssize_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_uint16_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_uint16_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_uint16_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: hssize_t */
-
-/* src: uint16_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_UINT16_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_uint16_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT16_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_uint16_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT16_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_uint16_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint16_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for uint32_t */
-
-/* src: uint32_t, dst: unsigned */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_uint32_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_uint32_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_uint32_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: unsigned */
-
-/* src: uint32_t, dst: int */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_INT
-    #define ASSIGN_uint32_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_INT
-    #define ASSIGN_uint32_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_INT */
-    #define ASSIGN_uint32_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: int */
-
-/* src: uint32_t, dst: int64_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_uint32_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_uint32_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_uint32_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: int64_t */
-
-/* src: uint32_t, dst: uint8_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_uint32_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_uint32_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_uint32_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: uint8_t */
-
-/* src: uint32_t, dst: uint16_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_uint32_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_uint32_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_uint32_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: uint16_t */
-
-/* src: uint32_t, dst: uint64_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_uint32_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_uint32_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_uint32_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: uint64_t */
-
-/* src: uint32_t, dst: ptrdiff_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_uint32_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_uint32_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_uint32_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: ptrdiff_t */
-
-/* src: uint32_t, dst: size_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_uint32_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_uint32_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_uint32_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: size_t */
-
-/* src: uint32_t, dst: ssize_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_uint32_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_uint32_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_uint32_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: ssize_t */
-
-/* src: uint32_t, dst: haddr_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_uint32_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_uint32_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_uint32_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: haddr_t */
-
-/* src: uint32_t, dst: hsize_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_uint32_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_uint32_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_uint32_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: hsize_t */
-
-/* src: uint32_t, dst: hssize_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_uint32_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_uint32_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_uint32_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: hssize_t */
-
-/* src: uint32_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_UINT32_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_uint32_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT32_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_uint32_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT32_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_uint32_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint32_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for uint64_t */
-
-/* src: uint64_t, dst: unsigned */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_uint64_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_uint64_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_uint64_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: unsigned */
-
-/* src: uint64_t, dst: int */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_INT
-    #define ASSIGN_uint64_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_INT
-    #define ASSIGN_uint64_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_INT */
-    #define ASSIGN_uint64_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: int */
-
-/* src: uint64_t, dst: int64_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_uint64_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_uint64_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_uint64_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: int64_t */
-
-/* src: uint64_t, dst: uint8_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_uint64_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_uint64_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_uint64_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: uint8_t */
-
-/* src: uint64_t, dst: uint16_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_uint64_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_uint64_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_uint64_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: uint16_t */
-
-/* src: uint64_t, dst: uint32_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_uint64_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_uint64_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_uint64_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: uint32_t */
-
-/* src: uint64_t, dst: ptrdiff_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_uint64_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_uint64_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_uint64_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: ptrdiff_t */
-
-/* src: uint64_t, dst: size_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_uint64_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_uint64_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_uint64_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: size_t */
-
-/* src: uint64_t, dst: ssize_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_uint64_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_uint64_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_uint64_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: ssize_t */
-
-/* src: uint64_t, dst: haddr_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_uint64_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_uint64_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_uint64_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: haddr_t */
-
-/* src: uint64_t, dst: hsize_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_uint64_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_uint64_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_uint64_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: hsize_t */
-
-/* src: uint64_t, dst: hssize_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_uint64_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_uint64_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_uint64_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: hssize_t */
-
-/* src: uint64_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_UINT64_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_uint64_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_UINT64_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_uint64_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_UINT64_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_uint64_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: uint64_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for ptrdiff_t */
-
-/* src: ptrdiff_t, dst: unsigned */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_ptrdiff_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_ptrdiff_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_ptrdiff_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: unsigned */
-
-/* src: ptrdiff_t, dst: int */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_INT
-    #define ASSIGN_ptrdiff_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_INT
-    #define ASSIGN_ptrdiff_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_INT */
-    #define ASSIGN_ptrdiff_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: int */
-
-/* src: ptrdiff_t, dst: int64_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_ptrdiff_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_ptrdiff_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_ptrdiff_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: int64_t */
-
-/* src: ptrdiff_t, dst: uint8_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_ptrdiff_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_ptrdiff_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_ptrdiff_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: uint8_t */
-
-/* src: ptrdiff_t, dst: uint16_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_ptrdiff_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_ptrdiff_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_ptrdiff_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: uint16_t */
-
-/* src: ptrdiff_t, dst: uint32_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_ptrdiff_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_ptrdiff_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_ptrdiff_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: uint32_t */
-
-/* src: ptrdiff_t, dst: uint64_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_ptrdiff_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_ptrdiff_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_ptrdiff_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: uint64_t */
-
-/* src: ptrdiff_t, dst: size_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_ptrdiff_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_ptrdiff_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_ptrdiff_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: size_t */
-
-/* src: ptrdiff_t, dst: ssize_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_ptrdiff_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_ptrdiff_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_ptrdiff_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: ssize_t */
-
-/* src: ptrdiff_t, dst: haddr_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_ptrdiff_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_ptrdiff_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_ptrdiff_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: haddr_t */
-
-/* src: ptrdiff_t, dst: hsize_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_ptrdiff_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_ptrdiff_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_ptrdiff_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: hsize_t */
-
-/* src: ptrdiff_t, dst: hssize_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_ptrdiff_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_ptrdiff_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_ptrdiff_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: hssize_t */
-
-/* src: ptrdiff_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_PTRDIFF_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_ptrdiff_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_PTRDIFF_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_ptrdiff_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_PTRDIFF_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_ptrdiff_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ptrdiff_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for size_t */
-
-/* src: size_t, dst: unsigned */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_size_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_size_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_size_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: unsigned */
-
-/* src: size_t, dst: int */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_INT
-    #define ASSIGN_size_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_INT
-    #define ASSIGN_size_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_INT */
-    #define ASSIGN_size_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: int */
-
-/* src: size_t, dst: int64_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_size_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_size_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_size_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: int64_t */
-
-/* src: size_t, dst: uint8_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_size_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_size_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_size_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: uint8_t */
-
-/* src: size_t, dst: uint16_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_size_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_size_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_size_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: uint16_t */
-
-/* src: size_t, dst: uint32_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_size_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_size_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_size_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: uint32_t */
-
-/* src: size_t, dst: uint64_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_size_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_size_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_size_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: uint64_t */
-
-/* src: size_t, dst: ptrdiff_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_size_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_size_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_size_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: ptrdiff_t */
-
-/* src: size_t, dst: ssize_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_size_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_size_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_size_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: ssize_t */
-
-/* src: size_t, dst: haddr_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_size_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_size_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_size_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: haddr_t */
-
-/* src: size_t, dst: hsize_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_size_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_size_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_size_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: hsize_t */
-
-/* src: size_t, dst: hssize_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_size_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_size_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_size_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: hssize_t */
-
-/* src: size_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_SIZE_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_size_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SIZE_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_size_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SIZE_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_size_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: size_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for ssize_t */
-
-/* src: ssize_t, dst: unsigned */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_ssize_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_ssize_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_ssize_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: unsigned */
-
-/* src: ssize_t, dst: int */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_INT
-    #define ASSIGN_ssize_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_INT
-    #define ASSIGN_ssize_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_INT */
-    #define ASSIGN_ssize_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: int */
-
-/* src: ssize_t, dst: int64_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_ssize_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_ssize_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_ssize_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: int64_t */
-
-/* src: ssize_t, dst: uint8_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_ssize_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_ssize_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_ssize_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: uint8_t */
-
-/* src: ssize_t, dst: uint16_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_ssize_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_ssize_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_ssize_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: uint16_t */
-
-/* src: ssize_t, dst: uint32_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_ssize_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_ssize_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_ssize_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: uint32_t */
-
-/* src: ssize_t, dst: uint64_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_ssize_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_ssize_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_ssize_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: uint64_t */
-
-/* src: ssize_t, dst: ptrdiff_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_ssize_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_ssize_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_ssize_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: ptrdiff_t */
-
-/* src: ssize_t, dst: size_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_ssize_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_ssize_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_ssize_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: size_t */
-
-/* src: ssize_t, dst: haddr_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_ssize_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_ssize_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_ssize_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: haddr_t */
-
-/* src: ssize_t, dst: hsize_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_ssize_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_ssize_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_ssize_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: hsize_t */
-
-/* src: ssize_t, dst: hssize_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_ssize_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_ssize_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_ssize_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: hssize_t */
-
-/* src: ssize_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_SSIZE_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_ssize_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_SSIZE_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_ssize_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_SSIZE_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_ssize_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: ssize_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for haddr_t */
-
-/* src: haddr_t, dst: unsigned */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_haddr_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_haddr_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_haddr_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: unsigned */
-
-/* src: haddr_t, dst: int */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_INT
-    #define ASSIGN_haddr_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_INT
-    #define ASSIGN_haddr_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_INT */
-    #define ASSIGN_haddr_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: int */
-
-/* src: haddr_t, dst: int64_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_haddr_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_haddr_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_haddr_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: int64_t */
-
-/* src: haddr_t, dst: uint8_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_haddr_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_haddr_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_haddr_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: uint8_t */
-
-/* src: haddr_t, dst: uint16_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_haddr_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_haddr_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_haddr_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: uint16_t */
-
-/* src: haddr_t, dst: uint32_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_haddr_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_haddr_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_haddr_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: uint32_t */
-
-/* src: haddr_t, dst: uint64_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_haddr_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_haddr_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_haddr_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: uint64_t */
-
-/* src: haddr_t, dst: ptrdiff_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_haddr_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_haddr_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_haddr_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: ptrdiff_t */
-
-/* src: haddr_t, dst: size_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_haddr_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_haddr_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_haddr_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: size_t */
-
-/* src: haddr_t, dst: ssize_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_haddr_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_haddr_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_haddr_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: ssize_t */
-
-/* src: haddr_t, dst: hsize_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_haddr_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_haddr_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_haddr_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: hsize_t */
-
-/* src: haddr_t, dst: hssize_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_haddr_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_haddr_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_haddr_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: hssize_t */
-
-/* src: haddr_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_HADDR_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_haddr_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HADDR_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_haddr_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HADDR_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_haddr_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: haddr_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for hsize_t */
-
-/* src: hsize_t, dst: unsigned */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_hsize_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_hsize_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_hsize_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: unsigned */
-
-/* src: hsize_t, dst: int */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_INT
-    #define ASSIGN_hsize_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_INT
-    #define ASSIGN_hsize_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_INT */
-    #define ASSIGN_hsize_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: int */
-
-/* src: hsize_t, dst: int64_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_hsize_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_hsize_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_hsize_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: int64_t */
-
-/* src: hsize_t, dst: uint8_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_hsize_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_hsize_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_hsize_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: uint8_t */
-
-/* src: hsize_t, dst: uint16_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_hsize_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_hsize_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_hsize_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: uint16_t */
-
-/* src: hsize_t, dst: uint32_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_hsize_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_hsize_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_hsize_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: uint32_t */
-
-/* src: hsize_t, dst: uint64_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_hsize_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_hsize_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_hsize_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: uint64_t */
-
-/* src: hsize_t, dst: ptrdiff_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_hsize_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_hsize_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_hsize_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: ptrdiff_t */
-
-/* src: hsize_t, dst: size_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_hsize_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_hsize_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_hsize_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: size_t */
-
-/* src: hsize_t, dst: ssize_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_hsize_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_hsize_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_hsize_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: ssize_t */
-
-/* src: hsize_t, dst: haddr_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_hsize_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_hsize_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_hsize_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: haddr_t */
-
-/* src: hsize_t, dst: hssize_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_hsize_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_hsize_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_hsize_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: hssize_t */
-
-/* src: hsize_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_HSIZE_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_hsize_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSIZE_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_hsize_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSIZE_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_hsize_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hsize_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for hssize_t */
-
-/* src: hssize_t, dst: unsigned */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_hssize_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_hssize_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_hssize_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: unsigned */
-
-/* src: hssize_t, dst: int */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_INT
-    #define ASSIGN_hssize_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_INT
-    #define ASSIGN_hssize_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_INT */
-    #define ASSIGN_hssize_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: int */
-
-/* src: hssize_t, dst: int64_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_hssize_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_hssize_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_hssize_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: int64_t */
-
-/* src: hssize_t, dst: uint8_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_hssize_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_hssize_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_hssize_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: uint8_t */
-
-/* src: hssize_t, dst: uint16_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_hssize_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_hssize_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_hssize_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: uint16_t */
-
-/* src: hssize_t, dst: uint32_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_hssize_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_hssize_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_hssize_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: uint32_t */
-
-/* src: hssize_t, dst: uint64_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_hssize_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_hssize_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_hssize_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: uint64_t */
-
-/* src: hssize_t, dst: ptrdiff_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_hssize_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_hssize_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_hssize_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: ptrdiff_t */
-
-/* src: hssize_t, dst: size_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_hssize_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_hssize_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_hssize_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: size_t */
-
-/* src: hssize_t, dst: ssize_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_hssize_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_hssize_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_hssize_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: ssize_t */
-
-/* src: hssize_t, dst: haddr_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_hssize_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_hssize_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_hssize_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: haddr_t */
-
-/* src: hssize_t, dst: hsize_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_hssize_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_hssize_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_hssize_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: hsize_t */
-
-/* src: hssize_t, dst: h5_stat_size_t */
-#if H5_SIZEOF_HSSIZE_T < H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_hssize_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_HSSIZE_T > H5_SIZEOF_H5_STAT_SIZE_T
-    #define ASSIGN_hssize_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_HSSIZE_T == H5_SIZEOF_H5_STAT_SIZE_T */
-    #define ASSIGN_hssize_t_TO_h5_stat_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SIGNED_TO_UNSIGNED(dst, dsttype, src, srctype)
-#endif /* src: hssize_t dst: h5_stat_size_t */
-
-
-/* Assignment checks for h5_stat_size_t */
-
-/* src: h5_stat_size_t, dst: unsigned */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_UNSIGNED
-    #define ASSIGN_h5_stat_size_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_UNSIGNED
-    #define ASSIGN_h5_stat_size_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_UNSIGNED */
-    #define ASSIGN_h5_stat_size_t_TO_unsigned(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: unsigned */
-
-/* src: h5_stat_size_t, dst: int */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_INT
-    #define ASSIGN_h5_stat_size_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_INT
-    #define ASSIGN_h5_stat_size_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_INT */
-    #define ASSIGN_h5_stat_size_t_TO_int(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: int */
-
-/* src: h5_stat_size_t, dst: int64_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_INT64_T
-    #define ASSIGN_h5_stat_size_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_INT64_T
-    #define ASSIGN_h5_stat_size_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_INT64_T */
-    #define ASSIGN_h5_stat_size_t_TO_int64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: int64_t */
-
-/* src: h5_stat_size_t, dst: uint8_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_UINT8_T
-    #define ASSIGN_h5_stat_size_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_UINT8_T
-    #define ASSIGN_h5_stat_size_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_UINT8_T */
-    #define ASSIGN_h5_stat_size_t_TO_uint8_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: uint8_t */
-
-/* src: h5_stat_size_t, dst: uint16_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_UINT16_T
-    #define ASSIGN_h5_stat_size_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_UINT16_T
-    #define ASSIGN_h5_stat_size_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_UINT16_T */
-    #define ASSIGN_h5_stat_size_t_TO_uint16_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: uint16_t */
-
-/* src: h5_stat_size_t, dst: uint32_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_UINT32_T
-    #define ASSIGN_h5_stat_size_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_UINT32_T
-    #define ASSIGN_h5_stat_size_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_UINT32_T */
-    #define ASSIGN_h5_stat_size_t_TO_uint32_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: uint32_t */
-
-/* src: h5_stat_size_t, dst: uint64_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_UINT64_T
-    #define ASSIGN_h5_stat_size_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_UINT64_T
-    #define ASSIGN_h5_stat_size_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_UINT64_T */
-    #define ASSIGN_h5_stat_size_t_TO_uint64_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: uint64_t */
-
-/* src: h5_stat_size_t, dst: ptrdiff_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_h5_stat_size_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_PTRDIFF_T
-    #define ASSIGN_h5_stat_size_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_PTRDIFF_T */
-    #define ASSIGN_h5_stat_size_t_TO_ptrdiff_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: ptrdiff_t */
-
-/* src: h5_stat_size_t, dst: size_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_SIZE_T
-    #define ASSIGN_h5_stat_size_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_SIZE_T
-    #define ASSIGN_h5_stat_size_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_SIZE_T */
-    #define ASSIGN_h5_stat_size_t_TO_size_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: size_t */
-
-/* src: h5_stat_size_t, dst: ssize_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_SSIZE_T
-    #define ASSIGN_h5_stat_size_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_SSIZE_T
-    #define ASSIGN_h5_stat_size_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_SSIZE_T */
-    #define ASSIGN_h5_stat_size_t_TO_ssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: ssize_t */
-
-/* src: h5_stat_size_t, dst: haddr_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_HADDR_T
-    #define ASSIGN_h5_stat_size_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_HADDR_T
-    #define ASSIGN_h5_stat_size_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_HADDR_T */
-    #define ASSIGN_h5_stat_size_t_TO_haddr_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: haddr_t */
-
-/* src: h5_stat_size_t, dst: hsize_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_HSIZE_T
-    #define ASSIGN_h5_stat_size_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_HSIZE_T
-    #define ASSIGN_h5_stat_size_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_HSIZE_T */
-    #define ASSIGN_h5_stat_size_t_TO_hsize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_SAME_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: hsize_t */
-
-/* src: h5_stat_size_t, dst: hssize_t */
-#if H5_SIZEOF_H5_STAT_SIZE_T < H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_h5_stat_size_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_LARGER_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#elif H5_SIZEOF_H5_STAT_SIZE_T > H5_SIZEOF_HSSIZE_T
-    #define ASSIGN_h5_stat_size_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SMALLER_SIZE(dst, dsttype, src, srctype)
-#else /* H5_SIZEOF_H5_STAT_SIZE_T == H5_SIZEOF_HSSIZE_T */
-    #define ASSIGN_h5_stat_size_t_TO_hssize_t(dst, dsttype, src, srctype) \
-        ASSIGN_TO_SAME_SIZE_UNSIGNED_TO_SIGNED(dst, dsttype, src, srctype)
-#endif /* src: h5_stat_size_t dst: hssize_t */
-
-#endif /* H5overflow_H */
-
diff --git a/src/H5private.h b/src/H5private.h
index 738d4ff..56061bf 100644
--- a/src/H5private.h
+++ b/src/H5private.h
@@ -1463,6 +1463,16 @@ extern char *strdup(const char *s);
     #define HDpthread_self_ulong()    ((unsigned long)pthread_self())
 #endif /* HDpthread_self_ulong */
 
+/* Macro for "stringizing" an integer in the C preprocessor (use H5_TOSTRING) */
+/* (use H5_TOSTRING, H5_STRINGIZE is just part of the implementation) */
+#define H5_STRINGIZE(x) #x
+#define H5_TOSTRING(x) H5_STRINGIZE(x)
+
+/* Macro for "glueing" together items, for re-scanning macros */
+#define H5_GLUE(x,y)       x##y
+#define H5_GLUE3(x,y,z)    x##y##z
+#define H5_GLUE4(w,x,y,z)  w##x##y##z
+
 /*
  * A macro for detecting over/under-flow when casting between types
  */
@@ -1782,10 +1792,12 @@ extern char  H5_lib_vers_info_g[];
 typedef struct H5_api_struct {
     H5TS_mutex_t init_lock;  /* API entrance mutex */
     hbool_t H5_libinit_g;    /* Has the library been initialized? */
+    hbool_t H5_libterm_g;    /* Is the library being shutdown? */
 } H5_api_t;
 
 /* Macros for accessing the global variables */
-#define H5_INIT_GLOBAL H5_g.H5_libinit_g
+#define H5_INIT_GLOBAL (H5_g.H5_libinit_g)
+#define H5_TERM_GLOBAL (H5_g.H5_libterm_g)
 
 /* Macro for first thread initialization */
 #ifdef H5_HAVE_WIN_THREADS
@@ -1824,9 +1836,11 @@ extern H5_api_t H5_g;
 
 /* extern global variables */
 extern hbool_t H5_libinit_g;    /* Has the library been initialized? */
+extern hbool_t H5_libterm_g;    /* Is the library being shutdown? */
 
 /* Macros for accessing the global variables */
-#define H5_INIT_GLOBAL H5_libinit_g
+#define H5_INIT_GLOBAL (H5_libinit_g)
+#define H5_TERM_GLOBAL (H5_libterm_g)
 
 #endif /* H5_HAVE_THREADSAFE */
 
@@ -1846,101 +1860,110 @@ extern hbool_t H5_libinit_g;    /* Has the library been initialized? */
 extern hbool_t H5_MPEinit_g;   /* Has the MPE Library been initialized? */
 #endif
 
-/* Macros for defining interface initialization routines */
-#ifdef H5_INTERFACE_INIT_FUNC
-static int    H5_interface_initialize_g = 0;
-static herr_t    H5_INTERFACE_INIT_FUNC(void);
-#define H5_INTERFACE_INIT(err)                  \
-   /* Initialize this interface or bust */              \
-   if (!H5_interface_initialize_g) {                \
-      H5_interface_initialize_g = 1;                \
-      if (H5_INTERFACE_INIT_FUNC()<0) {                \
-         H5_interface_initialize_g = 0;                      \
-         HGOTO_ERROR (H5E_FUNC, H5E_CANTINIT, err,                  \
-            "interface initialization failed")                          \
-      }                              \
-   }
-#else /* H5_INTERFACE_INIT_FUNC */
-#define H5_INTERFACE_INIT(err)
-#endif /* H5_INTERFACE_INIT_FUNC */
+/* Macros for referencing package initialization symbols */
+#define H5_PACKAGE_INIT_VAR(x)    H5_GLUE(x, _init_g)
+#define H5_PACKAGE_INIT_FUNC(x)   H5_GLUE(x, __init_package)
+
+/* Macros for defining package initialization routines */
+#ifdef H5_MY_PKG
+#define H5_PKG_INIT_VAR                 H5_PACKAGE_INIT_VAR(H5_MY_PKG)
+#define H5_PKG_INIT_FUNC                H5_PACKAGE_INIT_FUNC(H5_MY_PKG)
+#define H5_PACKAGE_YES_INIT(err)                                              \
+    /* Initialize this interface or bust */                                   \
+    if(!H5_PKG_INIT_VAR && !H5_TERM_GLOBAL) {                                 \
+        H5_PKG_INIT_VAR = TRUE;                                               \
+        if(H5_PKG_INIT_FUNC() < 0) {                                          \
+            H5_PKG_INIT_VAR = FALSE;                                          \
+            HGOTO_ERROR(H5E_FUNC, H5E_CANTINIT, err, "interface initialization failed") \
+        }                                                                     \
+    }
+#define H5_PACKAGE_NO_INIT(err)                                               \
+    /* Initialize this interface or bust */                                   \
+    if(!H5_PKG_INIT_VAR && !H5_TERM_GLOBAL)                                   \
+        H5_PKG_INIT_VAR = TRUE;
+#define H5_PACKAGE_INIT(pkg_init, err)  H5_GLUE3(H5_PACKAGE_, pkg_init, _INIT)(err)
+#else /* H5_MY_PKG */
+#define H5_PKG_INIT_VAR                 (TRUE)
+#define H5_PACKAGE_INIT(pkg_init, err)
+#endif /* H5_MY_PKG */
 
 
 #ifndef NDEBUG
-#define FUNC_ENTER_CHECK_NAME(asrt)                \
-    {                                \
-        static hbool_t func_check = FALSE;                      \
+#define FUNC_ENTER_CHECK_NAME(asrt)                                           \
+    {                                                                         \
+        static hbool_t func_check = FALSE;                                    \
                                                                               \
-        if(!func_check) {                     \
-            /* Check function naming status */              \
-            HDassert(asrt);                                    \
+        if(!func_check) {                                                     \
+            /* Check function naming status */                                \
+            HDassert(asrt);                                                   \
                                                                               \
-            /* Don't check again */                             \
-            func_check = TRUE;                  \
-        } /* end if */                    \
+            /* Don't check again */                                           \
+            func_check = TRUE;                                                \
+        } /* end if */                                                        \
     } /* end scope */
 #else /* NDEBUG */
 #define FUNC_ENTER_CHECK_NAME(asrt)
 #endif /* NDEBUG */
 
 
-#define FUNC_ENTER_COMMON(asrt)                                    \
-    hbool_t err_occurred = FALSE;                \
+#define FUNC_ENTER_COMMON(asrt)                                               \
+    hbool_t err_occurred = FALSE;                                             \
+                                                                              \
     FUNC_ENTER_CHECK_NAME(asrt);
 
-#define FUNC_ENTER_COMMON_NOERR(asrt)                              \
+#define FUNC_ENTER_COMMON_NOERR(asrt)                                         \
     FUNC_ENTER_CHECK_NAME(asrt);
 
 /* Threadsafety initialization code for API routines */
 #define FUNC_ENTER_API_THREADSAFE                                             \
-   /* Initialize the thread-safe code */              \
+   /* Initialize the thread-safe code */                                      \
    H5_FIRST_THREAD_INIT                                                       \
-                        \
-   /* Grab the mutex for the library */               \
+                                                                              \
+   /* Grab the mutex for the library */                                       \
    H5_API_UNSET_CANCEL                                                        \
    H5_API_LOCK
 
 /* Local variables for API routines */
 #define FUNC_ENTER_API_VARS                                                   \
-    MPE_LOG_VARS                                                  \
+    MPE_LOG_VARS                                                              \
     H5TRACE_DECL
 
-#define FUNC_ENTER_API_COMMON                         \
+#define FUNC_ENTER_API_COMMON                                                 \
     FUNC_ENTER_API_VARS                                                       \
-    FUNC_ENTER_COMMON(H5_IS_API(FUNC));                      \
+    FUNC_ENTER_COMMON(H5_IS_API(FUNC));                                       \
     FUNC_ENTER_API_THREADSAFE;
 
-#define FUNC_ENTER_API_INIT(err)                     \
-   /* Initialize the library */                         \
-   if(!(H5_INIT_GLOBAL)) {                                                    \
-       H5_INIT_GLOBAL = TRUE;                                                 \
-       if(H5_init_library() < 0)                  \
-          HGOTO_ERROR(H5E_FUNC, H5E_CANTINIT, err,                  \
-            "library initialization failed")                          \
-   }                              \
+#define FUNC_ENTER_API_INIT(err)                                              \
+    /* Initialize the library */                                              \
+    if(!H5_INIT_GLOBAL && !H5_TERM_GLOBAL) {                                  \
+        H5_INIT_GLOBAL = TRUE;                                                \
+        if(H5_init_library() < 0)                                             \
+            HGOTO_ERROR(H5E_FUNC, H5E_CANTINIT, err, "library initialization failed") \
+    } /* end if */                                                            \
                                                                               \
-   /* Initialize the interface, if appropriate */                  \
-   H5_INTERFACE_INIT(err)                  \
+    /* Initialize the package, if appropriate */                              \
+    H5_PACKAGE_INIT(H5_MY_PKG_INIT, err)                                      \
                                                                               \
-   /* Push the name of this function on the function stack */                 \
-   H5_PUSH_FUNC                                                               \
+    /* Push the name of this function on the function stack */                \
+    H5_PUSH_FUNC                                                              \
                                                                               \
-   BEGIN_MPE_LOG
+    BEGIN_MPE_LOG
 
 /* Use this macro for all "normal" API functions */
-#define FUNC_ENTER_API(err) {{                                      \
+#define FUNC_ENTER_API(err) {{                                                \
     FUNC_ENTER_API_COMMON                                                     \
-    FUNC_ENTER_API_INIT(err);                            \
-    /* Clear thread error stack entering public functions */          \
-    H5E_clear_stack(NULL);                              \
+    FUNC_ENTER_API_INIT(err);                                                 \
+    /* Clear thread error stack entering public functions */                  \
+    H5E_clear_stack(NULL);                                                    \
     {
 
 /*
  * Use this macro for API functions that shouldn't clear the error stack
  *      like H5Eprint and H5Ewalk.
  */
-#define FUNC_ENTER_API_NOCLEAR(err) {{                              \
+#define FUNC_ENTER_API_NOCLEAR(err) {{                                        \
     FUNC_ENTER_API_COMMON                                                     \
-    FUNC_ENTER_API_INIT(err);                            \
+    FUNC_ENTER_API_INIT(err);                                                 \
     {
 
 /*
@@ -1949,7 +1972,7 @@ static herr_t    H5_INTERFACE_INIT_FUNC(void);
  *      are: H5check_version, etc.
  *
  */
-#define FUNC_ENTER_API_NOINIT {{                                   \
+#define FUNC_ENTER_API_NOINIT {{                                              \
     FUNC_ENTER_API_COMMON                                                     \
     H5_PUSH_FUNC                                                              \
     BEGIN_MPE_LOG                                                             \
@@ -1962,38 +1985,120 @@ static herr_t    H5_INTERFACE_INIT_FUNC(void);
  *      are: H5close, H5check_version, etc.
  *
  */
-#define FUNC_ENTER_API_NOINIT_NOERR_NOFS {{                       \
+#define FUNC_ENTER_API_NOINIT_NOERR_NOFS {{                                   \
     FUNC_ENTER_API_VARS                                                       \
-    FUNC_ENTER_COMMON_NOERR(H5_IS_API(FUNC));                      \
-    FUNC_ENTER_API_THREADSAFE;                  \
+    FUNC_ENTER_COMMON_NOERR(H5_IS_API(FUNC));                                 \
+    FUNC_ENTER_API_THREADSAFE;                                                \
     BEGIN_MPE_LOG                                                             \
     {
 
 /* Note: this macro only works when there's _no_ interface initialization routine for the module */
-#define FUNC_ENTER_NOAPI_INIT(err)                     \
-   /* Initialize the interface, if appropriate */                  \
-   H5_INTERFACE_INIT(err)                  \
+#define FUNC_ENTER_NOAPI_INIT(err)                                            \
+    /* Initialize the package, if appropriate */                              \
+    H5_PACKAGE_INIT(H5_MY_PKG_INIT, err)                                      \
                                                                               \
-   /* Push the name of this function on the function stack */                 \
-   H5_PUSH_FUNC            
+    /* Push the name of this function on the function stack */                \
+    H5_PUSH_FUNC
 
 /* Use this macro for all "normal" non-API functions */
-#define FUNC_ENTER_NOAPI(err) {                                     \
-    FUNC_ENTER_COMMON(!H5_IS_API(FUNC));                     \
-    FUNC_ENTER_NOAPI_INIT(err)                          \
-    {
+#define FUNC_ENTER_NOAPI(err) {                                               \
+    FUNC_ENTER_COMMON(!H5_IS_API(FUNC));                                      \
+    FUNC_ENTER_NOAPI_INIT(err)                                                \
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
+
+/* Use this macro for all non-API functions, which propagate errors, but don't issue them */
+#define FUNC_ENTER_NOAPI_NOERR {                                              \
+    FUNC_ENTER_COMMON_NOERR(!H5_IS_API(FUNC));                                \
+    FUNC_ENTER_NOAPI_INIT(-)                                                  \
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
+
+/*
+ * Use this macro for non-API functions which fall into these categories:
+ *      - static functions, since they must be called from a function in the
+ *              interface, the library and interface must already be
+ *              initialized.
+ *      - functions which are called during library shutdown, since we don't
+ *              want to re-initialize the library.
+ */
+#define FUNC_ENTER_NOAPI_NOINIT {                                             \
+    FUNC_ENTER_COMMON(!H5_IS_API(FUNC));                                      \
+    H5_PUSH_FUNC                                                              \
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
+
+/*
+ * Use this macro for non-API functions which fall into these categories:
+ *      - static functions, since they must be called from a function in the
+ *              interface, the library and interface must already be
+ *              initialized.
+ *      - functions which are called during library shutdown, since we don't
+ *              want to re-initialize the library.
+ *      - functions that propagate, but don't issue errors
+ */
+#define FUNC_ENTER_NOAPI_NOINIT_NOERR {                                       \
+    FUNC_ENTER_COMMON_NOERR(!H5_IS_API(FUNC));                                \
+    H5_PUSH_FUNC                                                              \
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
+
+/*
+ * Use this macro for non-API functions which fall into these categories:
+ *      - functions which shouldn't push their name on the function stack
+ *              (so far, just the H5CS routines themselves)
+ *
+ */
+#define FUNC_ENTER_NOAPI_NOFS {                                               \
+    FUNC_ENTER_COMMON(!H5_IS_API(FUNC));                                      \
+                                                                              \
+    /* Initialize the package, if appropriate */                              \
+    H5_PACKAGE_INIT(H5_MY_PKG_INIT, err)                                      \
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
+
+/*
+ * Use this macro for non-API functions which fall into these categories:
+ *      - functions which shouldn't push their name on the function stack
+ *              (so far, just the H5CS routines themselves)
+ *
+ * This macro is used for functions which fit the above categories _and_
+ * also don't use the 'FUNC' variable (i.e. don't push errors on the error stack)
+ *
+ */
+#define FUNC_ENTER_NOAPI_NOERR_NOFS {                                         \
+    FUNC_ENTER_COMMON_NOERR(!H5_IS_API(FUNC));                                \
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
+
+/* Use the following two macros as replacements for the FUNC_ENTER_NOAPI 
+ * and FUNC_ENTER_NOAPI_NOINIT macros when the function needs to set
+ * up a metadata tag. */
+#define FUNC_ENTER_NOAPI_TAG(dxpl_id, tag, err) {                             \
+    haddr_t prev_tag = HADDR_UNDEF;                                           \
+    hid_t tag_dxpl_id = dxpl_id;                                              \
+                                                                              \
+    FUNC_ENTER_COMMON(!H5_IS_API(FUNC));                                      \
+    if(H5AC_tag(tag_dxpl_id, tag, &prev_tag)<0)                               \
+        HGOTO_ERROR(H5_MY_PKG_ERR, H5E_CANTTAG, err, "unable to apply metadata tag") \
+    FUNC_ENTER_NOAPI_INIT(err)                                                \
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
+
+#define FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, tag, err) {                      \
+    haddr_t prev_tag = HADDR_UNDEF;                                           \
+    hid_t tag_dxpl_id = dxpl_id;                                              \
+                                                                              \
+    FUNC_ENTER_COMMON(!H5_IS_API(FUNC));                                      \
+    if(H5AC_tag(tag_dxpl_id, tag, &prev_tag)<0)                               \
+        HGOTO_ERROR(H5_MY_PKG_ERR, H5E_CANTTAG, err, "unable to apply metadata tag") \
+    H5_PUSH_FUNC                                                              \
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
 
 /* Use this macro for all "normal" package-level functions */
 #define FUNC_ENTER_PACKAGE {                                                  \
     FUNC_ENTER_COMMON(H5_IS_PKG(FUNC));                                       \
     H5_PUSH_FUNC                                                              \
-    {
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
 
 /* Use this macro for package-level functions which propgate errors, but don't issue them */
 #define FUNC_ENTER_PACKAGE_NOERR {                                            \
     FUNC_ENTER_COMMON_NOERR(H5_IS_PKG(FUNC));                                 \
     H5_PUSH_FUNC                                                              \
-    {
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
 
 /* Use the following macro as replacement for the FUNC_ENTER_PACKAGE
  * macro when the function needs to set up a metadata tag. */
@@ -2003,21 +2108,27 @@ static herr_t    H5_INTERFACE_INIT_FUNC(void);
                                                                               \
     FUNC_ENTER_COMMON(H5_IS_PKG(FUNC));                                       \
     if(H5AC_tag(tag_dxpl_id, tag, &prev_tag) < 0)                             \
-        HGOTO_ERROR(H5E_CACHE, H5E_CANTTAG, err, "unable to apply metadata tag") \
+        HGOTO_ERROR(H5_MY_PKG_ERR, H5E_CANTTAG, err, "unable to apply metadata tag") \
     H5_PUSH_FUNC                                                              \
-    {
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
 
 /* Use this macro for all "normal" staticly-scoped functions */
 #define FUNC_ENTER_STATIC {                                                   \
     FUNC_ENTER_COMMON(H5_IS_PKG(FUNC));                                       \
     H5_PUSH_FUNC                                                              \
-    {
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
 
 /* Use this macro for staticly-scoped functions which propgate errors, but don't issue them */
 #define FUNC_ENTER_STATIC_NOERR {                                             \
     FUNC_ENTER_COMMON_NOERR(H5_IS_PKG(FUNC));                                 \
     H5_PUSH_FUNC                                                              \
-    {
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
+
+/* Use this macro for staticly-scoped functions which propgate errors, but don't issue them */
+/* And that shouldn't push their name on the function stack */
+#define FUNC_ENTER_STATIC_NOERR_NOFS {                                        \
+    FUNC_ENTER_COMMON_NOERR(H5_IS_PKG(FUNC));                                 \
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
 
 /* Use the following macro as replacement for the FUNC_ENTER_STATIC
  * macro when the function needs to set up a metadata tag. */
@@ -2027,76 +2138,9 @@ static herr_t    H5_INTERFACE_INIT_FUNC(void);
                                                                               \
     FUNC_ENTER_COMMON(H5_IS_PKG(FUNC));                                       \
     if(H5AC_tag(tag_dxpl_id, tag, &prev_tag) < 0)                             \
-        HGOTO_ERROR(H5E_CACHE, H5E_CANTTAG, err, "unable to apply metadata tag") \
+        HGOTO_ERROR(H5_MY_PKG_ERR, H5E_CANTTAG, err, "unable to apply metadata tag") \
     H5_PUSH_FUNC                                                              \
-    {
-
-/* Use this macro for all non-API functions, which propagate errors, but don't issue them */
-#define FUNC_ENTER_NOAPI_NOERR {                               \
-    FUNC_ENTER_COMMON_NOERR(!H5_IS_API(FUNC));               \
-    FUNC_ENTER_NOAPI_INIT(-)                          \
-    {
-
-/*
- * Use this macro for non-API functions which fall into these categories:
- *      - static functions, since they must be called from a function in the
- *              interface, the library and interface must already be
- *              initialized.
- *      - functions which are called during library shutdown, since we don't
- *              want to re-initialize the library.
- */
-#define FUNC_ENTER_NOAPI_NOINIT {                                  \
-    FUNC_ENTER_COMMON(!H5_IS_API(FUNC));                     \
-    H5_PUSH_FUNC                                                              \
-    {
-
-/*
- * Use this macro for non-API functions which fall into these categories:
- *      - static functions, since they must be called from a function in the
- *              interface, the library and interface must already be
- *              initialized.
- *      - functions which are called during library shutdown, since we don't
- *              want to re-initialize the library.
- *      - functions that propagate, but don't issue errors
- */
-#define FUNC_ENTER_NOAPI_NOINIT_NOERR {                            \
-    FUNC_ENTER_COMMON_NOERR(!H5_IS_API(FUNC));               \
-    H5_PUSH_FUNC                                                              \
-    {
-
-/*
- * Use this macro for non-API functions which fall into these categories:
- *      - functions which shouldn't push their name on the function stack
- *              (so far, just the H5CS routines themselves)
- *
- * This macro is used for functions which fit the above categories _and_
- * also don't use the 'FUNC' variable (i.e. don't push errors on the error stack)
- *
- */
-#define FUNC_ENTER_NOAPI_NOERR_NOFS {                             \
-    FUNC_ENTER_COMMON_NOERR(!H5_IS_API(FUNC));               \
-    {
-
-/* Use the following two macros as replacements for the FUNC_ENTER_NOAPI 
- * and FUNC_ENTER_NOAPI_NOINIT macros when the function needs to set
- * up a metadata tag. */
-#define FUNC_ENTER_NOAPI_TAG(dxpl_id, tag, err) {                     \
-    haddr_t prev_tag = HADDR_UNDEF;                                              \
-    hid_t tag_dxpl_id = dxpl_id;                                                 \
-    FUNC_ENTER_COMMON(!H5_IS_API(FUNC));                        \
-    if(H5AC_tag(tag_dxpl_id, tag, &prev_tag)<0)                                  \
-        HGOTO_ERROR(H5E_CACHE, H5E_CANTTAG, err, "unable to apply metadata tag") \
-    FUNC_ENTER_NOAPI_INIT(err)                                     \
-    {
-
-#define FUNC_ENTER_NOAPI_NOINIT_TAG(dxpl_id, tag, err) {              \
-    haddr_t prev_tag = HADDR_UNDEF;                                              \
-    hid_t tag_dxpl_id = dxpl_id;                                                 \
-    FUNC_ENTER_COMMON(!H5_IS_API(FUNC));                        \
-    if(H5AC_tag(tag_dxpl_id, tag, &prev_tag)<0)                                  \
-        HGOTO_ERROR(H5E_CACHE, H5E_CANTTAG, err, "unable to apply metadata tag") \
-    H5_PUSH_FUNC                                                                 \
-    {
+    if(H5_PKG_INIT_VAR || !H5_TERM_GLOBAL) {
 
 
 /*-------------------------------------------------------------------------
@@ -2113,35 +2157,39 @@ static herr_t    H5_INTERFACE_INIT_FUNC(void);
     H5_API_SET_CANCEL
 
 #define FUNC_LEAVE_API(ret_value)                                             \
-        FINISH_MPE_LOG                                                       \
-        H5TRACE_RETURN(ret_value);                \
-        H5_POP_FUNC                                                           \
-        if(err_occurred)                  \
-           (void)H5E_dump_api_stack(TRUE);              \
-        FUNC_LEAVE_API_THREADSAFE                                             \
-        return(ret_value);                  \
+        ;                                                                     \
     } /*end scope from end of FUNC_ENTER*/                                    \
+    FINISH_MPE_LOG                                                            \
+    H5TRACE_RETURN(ret_value);                                                \
+    H5_POP_FUNC                                                               \
+    if(err_occurred)                                                          \
+       (void)H5E_dump_api_stack(TRUE);                                        \
+    FUNC_LEAVE_API_THREADSAFE                                                 \
+    return(ret_value);                                                        \
 }} /*end scope from beginning of FUNC_ENTER*/
 
 /* Use this macro to match the FUNC_ENTER_API_NOFS macro */
 #define FUNC_LEAVE_API_NOFS(ret_value)                                        \
-        FINISH_MPE_LOG                                                       \
-        H5TRACE_RETURN(ret_value);                \
-        FUNC_LEAVE_API_THREADSAFE                                             \
-        return(ret_value);                  \
+        ;                                                                     \
     } /*end scope from end of FUNC_ENTER*/                                    \
+    FINISH_MPE_LOG                                                            \
+    H5TRACE_RETURN(ret_value);                                                \
+    FUNC_LEAVE_API_THREADSAFE                                                 \
+    return(ret_value);                                                        \
 }} /*end scope from beginning of FUNC_ENTER*/
 
 #define FUNC_LEAVE_NOAPI(ret_value)                                           \
-        H5_POP_FUNC                                                           \
-        return(ret_value);                  \
+        ;                                                                     \
     } /*end scope from end of FUNC_ENTER*/                                    \
+    H5_POP_FUNC                                                               \
+    return(ret_value);                                                        \
 } /*end scope from beginning of FUNC_ENTER*/
 
 #define FUNC_LEAVE_NOAPI_VOID                                                 \
-        H5_POP_FUNC                                                           \
-        return;                                  \
+        ;                                                                     \
     } /*end scope from end of FUNC_ENTER*/                                    \
+    H5_POP_FUNC                                                               \
+    return;                                                                   \
 } /*end scope from beginning of FUNC_ENTER*/
 
 /*
@@ -2150,135 +2198,146 @@ static herr_t    H5_INTERFACE_INIT_FUNC(void);
  *              (so far, just the H5CS routines themselves)
  */
 #define FUNC_LEAVE_NOAPI_NOFS(ret_value)                                      \
-        return(ret_value);                  \
+        ;                                                                     \
     } /*end scope from end of FUNC_ENTER*/                                    \
+    return(ret_value);                                                        \
 } /*end scope from beginning of FUNC_ENTER*/
 
 /* Use this macro when exiting a function that set up a metadata tag */
-#define FUNC_LEAVE_NOAPI_TAG(ret_value, err)                                         \
-        if(H5AC_tag(tag_dxpl_id, prev_tag, NULL)<0)                                  \
-            HDONE_ERROR(H5E_CACHE, H5E_CANTTAG, err, "unable to apply metadata tag") \
-        H5_POP_FUNC                                                                  \
-        return(ret_value);                                                 \
-    } /*end scope from end of FUNC_ENTER*/                                           \
+#define FUNC_LEAVE_NOAPI_TAG(ret_value, err)                                  \
+        ;                                                                     \
+    } /*end scope from end of FUNC_ENTER*/                                    \
+    if(H5AC_tag(tag_dxpl_id, prev_tag, NULL) < 0)                             \
+        HDONE_ERROR(H5E_CACHE, H5E_CANTTAG, err, "unable to apply metadata tag") \
+    H5_POP_FUNC                                                               \
+    return(ret_value);                                                        \
 } /*end scope from beginning of FUNC_ENTER*/
 
+
 /****************************************/
 /* Revisions to FUNC_ENTER/LEAVE Macros */
 /****************************************/
 
-/* Macros for referencing package initialization symbols */
-#define H5_PACKAGE_INIT_VAR(x) H5_GLUE3(H5_, x, _init_g)
-#define H5_PACKAGE_INIT_FUNC(x) H5_GLUE(x, __pkg_init)
-
 /* Macros to check if a package is initialized */
-#define H5_CHECK_PACKAGE_INIT_REG_YES(asrt)       HDassert(H5_PACKAGE_INIT_VAR(pkg));
+#define H5_CHECK_PACKAGE_INIT_REG_YES(asrt)   HDassert(H5_PACKAGE_INIT_VAR(pkg));
 #define H5_CHECK_PACKAGE_INIT_REG_NO(asrt)
 #define H5_CHECK_PACKAGE_INIT_INIT_YES(asrt)
 #define H5_CHECK_PACKAGE_INIT_INIT_NO(asrt)
+#define H5_CHECK_PACKAGE_INIT(pkg, pkg_init, init)  H5_GLUE4(H5_CHECK_PACKAGE_INIT_, init, _, pkg_init)(pkg)
 
 /* Macros to initialize package, if a package initialization routine is defined */
-#define H5_PKG_YES_INIT(pkg)                  \
-    if(!H5_PACKAGE_INIT_VAR(pkg)) {                \
-        if(H5_GLUE(pkg, _pkg_init)() < 0) {              \
-            /* (Can't use H5E_THROW here) */              \
+#define H5_PKG_YES_INIT(pkg)                                                  \
+    if(!H5_PACKAGE_INIT_VAR(pkg) && !H5_TERM_GLOBAL) {                        \
+        H5_PACKAGE_INIT_VAR(pkg) = TRUE;                                      \
+        if(H5_PACKAGE_INIT_FUNC(pkg)() < 0) {                                 \
+            H5_PACKAGE_INIT_VAR(pkg) = FALSE;                                 \
+            /* (Can't use H5E_THROW here) */                                  \
             H5E_PRINTF(H5E_CANTINIT, "interface initialization failed");      \
-            ret_value = fail_value;                \
-            goto func_init_failed;                \
-        } /* end if */                          \
+            ret_value = fail_value;                                           \
+            goto func_init_failed;                                            \
+        } /* end if */                                                        \
     } /* end if */
-#define H5_PKG_NO_INIT(pkg)
-
-/* Macros to declare package initialization symbols, if a package initialization routine is defined */
-#define H5_PKG_YES_INIT_VAR(pkg) extern hbool_t H5_PACKAGE_INIT_VAR(H5_MY_PKG);
-#define H5_PKG_NO_INIT_VAR(pkg)
-#define H5_PKG_YES_INIT_FUNC(pkg) extern herr_t H5_PACKAGE_INIT_FUNC(pkg)(void);
-#define H5_PKG_NO_INIT_FUNC(pkg)
+#define H5_PKG_NO_INIT(pkg)                                                   \
+    if(!H5_PACKAGE_INIT_VAR(pkg) && !H5_TERM_GLOBAL)                          \
+        H5_PACKAGE_INIT_VAR(pkg) = TRUE;
+#define H5_PKG_INIT(pkg_init, pkg)      H5_GLUE3(H5_PKG_, pkg_init, _INIT)(pkg)
+
+/* Macros to declare package initialization function, if a package initialization routine is defined */
+#ifdef H5_PKG_SINGLE_SOURCE
+#define H5_PKG_DECLARE_YES_FUNC(pkg) static herr_t H5_PACKAGE_INIT_FUNC(pkg)(void);
+#else  /* H5_PKG_SINGLE_SOURCE */
+#define H5_PKG_DECLARE_YES_FUNC(pkg) extern herr_t H5_PACKAGE_INIT_FUNC(pkg)(void);
+#endif /* H5_PKG_SINGLE_SOURCE */
+#define H5_PKG_DECLARE_NO_FUNC(pkg)
 
 /* Declare package initialization symbols (if in a package) */
-#define H5_DECLARE_PKG_VAR(pkg_init, pkg) H5_GLUE3(H5_PKG_, pkg_init, _INIT_VAR)(pkg)
-#define H5_DECLARE_PKG_FUNC(pkg_init, pkg) H5_GLUE3(H5_PKG_, pkg_init, _INIT_FUNC)(pkg)
+#ifdef H5_PKG_SINGLE_SOURCE
+#define H5_PKG_DECLARE_VAR(pkg)         static hbool_t H5_PACKAGE_INIT_VAR(pkg);
+#else  /* H5_PKG_SINGLE_SOURCE */
+#define H5_PKG_DECLARE_VAR(pkg)         extern hbool_t H5_PACKAGE_INIT_VAR(pkg);
+#endif  /* H5_PKG_SINGLE_SOURCE */
+#define H5_PKG_DECLARE_FUNC(pkg_init, pkg) H5_GLUE3(H5_PKG_DECLARE_, pkg_init, _FUNC)(pkg)
 #ifdef H5_MY_PKG
-H5_DECLARE_PKG_VAR(H5_MY_PKG_INIT, H5_MY_PKG)
-H5_DECLARE_PKG_FUNC(H5_MY_PKG_INIT, H5_MY_PKG)
+H5_PKG_DECLARE_VAR(H5_MY_PKG)
+H5_PKG_DECLARE_FUNC(H5_MY_PKG_INIT, H5_MY_PKG)
 #endif /* H5_MY_PKG */
 
 /* API re-entrance variable */
 extern hbool_t H5_api_entered_g;    /* Has library already been entered through API? */
 
 /* Macros for entering different scopes of routines */
-#define H5_PACKAGE_ENTER(pkg, pkg_init, init)              \
-    FUNC_ENTER_CHECK_NAME(H5_IS_PKG(FUNC))              \
+#define H5_PACKAGE_ENTER(pkg, pkg_init, init)                                 \
+    FUNC_ENTER_CHECK_NAME(H5_IS_PKG(FUNC))                                    \
                                                                               \
-    /* The library should be initialized already */            \
-    HDassert(H5_INIT_GLOBAL);                  \
+    /* The library should be initialized already */                           \
+    HDassert(H5_INIT_GLOBAL);                                                 \
                                                                               \
-    /* This interface should be initialized already */            \
-    /* (except for package initialization routines :-) */          \
-    H5_GLUE4(H5_CHECK_PACKAGE_INIT_, init, _, pkg_init)(pkg)          \
+    /* This interface should be initialized already */                        \
+    /* (except for package initialization routines :-) */                     \
+    H5_CHECK_PACKAGE_INIT(pkg, pkg_init, init)                                \
                                                                               \
-    /* Push the name of this function on the function stack */          \
-    H5_PUSH_FUNC                          \
+    /* Push the name of this function on the function stack */                \
+    H5_PUSH_FUNC                                                              \
                                                                               \
-    /* Enter scope for this type of function */              \
+    /* Enter scope for this type of function */                               \
     {
 
-#define H5_PRIVATE_ENTER(pkg, pkg_init)                \
-    FUNC_ENTER_CHECK_NAME(H5_IS_PRIV(FUNC))              \
+#define H5_PRIVATE_ENTER(pkg, pkg_init)                                       \
+    FUNC_ENTER_CHECK_NAME(H5_IS_PRIV(FUNC))                                   \
                                                                               \
-    /* The library should be initialized already */            \
-    HDassert(H5_INIT_GLOBAL);                  \
+    /* The library should be initialized already */                           \
+    HDassert(H5_INIT_GLOBAL);                                                 \
                                                                               \
-    /* Initialize this interface if desired */              \
-    H5_GLUE3(H5_PKG_, pkg_init, _INIT)(pkg)              \
+    /* Initialize this interface if desired */                                \
+    H5_PKG_INIT(pkg_init, pkg)                                                \
                                                                               \
-    /* Push the name of this function on the function stack */          \
-    H5_PUSH_FUNC                          \
+    /* Push the name of this function on the function stack */                \
+    H5_PUSH_FUNC                                                              \
                                                                               \
-    /* Enter scope for this type of function */              \
+    /* Enter scope for this type of function */                               \
     {{
 
-#define H5_PUBLIC_ENTER(pkg, pkg_init)                \
-    FUNC_ENTER_API_VARS                                                    \
+#define H5_PUBLIC_ENTER(pkg, pkg_init)                                        \
+    FUNC_ENTER_API_VARS                                                       \
     FUNC_ENTER_API_THREADSAFE;                                                \
-    FUNC_ENTER_CHECK_NAME(H5_IS_PUB(FUNC))              \
+    FUNC_ENTER_CHECK_NAME(H5_IS_PUB(FUNC))                                    \
                                                                               \
-    /* Clear thread error stack when entering public functions */        \
-    H5E_clear_stack(NULL);                              \
+    /* Clear thread error stack when entering public functions */             \
+    H5E_clear_stack(NULL);                                                    \
                                                                               \
-    /* Initialize the library or bust */              \
-    if(!(H5_INIT_GLOBAL)) {                  \
+    /* Initialize the library or bust */                                      \
+    if(!H5_INIT_GLOBAL && !H5_TERM_GLOBAL) {                                  \
         H5_INIT_GLOBAL = TRUE;                                                \
-        if(H5_init_library() < 0) {                  \
-            /* (Can't use H5E_THROW here) */              \
+        if(H5_init_library() < 0) {                                           \
+            /* (Can't use H5E_THROW here) */                                  \
             H5E_PRINTF(H5E_CANTINIT, "interface initialization failed");      \
-            ret_value = fail_value;                \
-            goto func_init_failed;                \
-        } /* end if */                          \
-    } /* end if */                          \
+            ret_value = fail_value;                                           \
+            goto func_init_failed;                                            \
+        } /* end if */                                                        \
+    } /* end if */                                                            \
                                                                               \
-    /* Initialize this interface if desired */              \
-    H5_GLUE3(H5_PKG_, pkg_init, _INIT)(pkg)              \
+    /* Initialize this interface if desired */                                \
+    H5_PKG_INIT(pkg_init, pkg)                                                \
                                                                               \
-    /* Check for re-entering API routine */              \
-    HDassert(!H5_api_entered_g);                \
-    H5_api_entered_g = TRUE;                  \
+    /* Check for re-entering API routine */                                   \
+    HDassert(!H5_api_entered_g);                                              \
+    H5_api_entered_g = TRUE;                                                  \
                                                                               \
-    /* Start logging MPI's MPE information */              \
-    BEGIN_MPE_LOG                    \
+    /* Start logging MPI's MPE information */                                 \
+    BEGIN_MPE_LOG                                                             \
                                                                               \
-    /* Push the name of this function on the function stack */          \
-    H5_PUSH_FUNC                          \
+    /* Push the name of this function on the function stack */                \
+    H5_PUSH_FUNC                                                              \
                                                                               \
-    /* Enter scope for this type of function */              \
+    /* Enter scope for this type of function */                               \
     {{{
 
 /* Macros for substituting the package name */
-#define FUNC_ENT_STATIC  H5_PACKAGE_ENTER(H5_MY_PKG, H5_MY_PKG_INIT, REG)
-#define FUNC_ENT_PKGINIT  H5_PACKAGE_ENTER(H5_MY_PKG, H5_MY_PKG_INIT, INIT)
-#define FUNC_ENT_PKG    H5_PACKAGE_ENTER(H5_MY_PKG, H5_MY_PKG_INIT, REG)
-#define FUNC_ENT_PRIV    H5_PRIVATE_ENTER(H5_MY_PKG, H5_MY_PKG_INIT)
-#define FUNC_ENT_PUB    H5_PUBLIC_ENTER(H5_MY_PKG, H5_MY_PKG_INIT)
+#define FUNC_ENT_STATIC(pkg, pkg_init)  H5_PACKAGE_ENTER(pkg, pkg_init, REG)
+#define FUNC_ENT_PKGINIT(pkg, pkg_init)  H5_PACKAGE_ENTER(pkg, pkg_init, INIT)
+#define FUNC_ENT_PKG(pkg, pkg_init)    H5_PACKAGE_ENTER(pkg, pkg_init, REG)
+#define FUNC_ENT_PRIV(pkg, pkg_init)    H5_PRIVATE_ENTER(pkg, pkg_init)
+#define FUNC_ENT_PUB(pkg, pkg_init)    H5_PUBLIC_ENTER(pkg, pkg_init)
 
 /* Macros for substituting a function prefix */
 #define FUNC_PREFIX_STATIC  static
@@ -2288,23 +2347,23 @@ extern hbool_t H5_api_entered_g;    /* Has library already been entered through
 #define FUNC_PREFIX_PUB
 
 /* Macros for declaring error variables */
-#define FUNC_ERR_VAR_ERR(ret_typ, err)                \
-    hbool_t past_catch = FALSE;                  \
+#define FUNC_ERR_VAR_ERR(ret_typ, err)                                        \
+    hbool_t past_catch = FALSE;                                               \
     ret_typ fail_value = err;
-#define FUNC_ERR_VAR_ERRCATCH(ret_typ, err)                \
+#define FUNC_ERR_VAR_ERRCATCH(ret_typ, err)                                   \
     hbool_t past_catch = FALSE;
 #define FUNC_ERR_VAR_NOERR(ret_typ, err)
 
 /* Use this macro when entering all functions */
-#define BEGIN_FUNC(scope, use_err, ret_typ, ret_init, err, func)        \
-H5_GLUE(FUNC_PREFIX_, scope)                  \
-ret_typ                        \
-func                        \
-/* Open function */                    \
-{                        \
-    ret_typ ret_value = ret_init;                \
-    H5_GLUE(FUNC_ERR_VAR_, use_err)(ret_typ, err)            \
-    H5_GLUE(FUNC_ENT_, scope)
+#define BEGIN_FUNC(scope, use_err, ret_typ, ret_init, err, func)              \
+H5_GLUE(FUNC_PREFIX_, scope)                                                  \
+ret_typ                                                                       \
+func                                                                          \
+/* Open function */                                                           \
+{                                                                             \
+    ret_typ ret_value = ret_init;                                             \
+    H5_GLUE(FUNC_ERR_VAR_, use_err)(ret_typ, err)                             \
+    H5_GLUE(FUNC_ENT_, scope)(H5_MY_PKG, H5_MY_PKG_INIT)
 
 /* Macros for label when a function initialization can fail */
 #define H5_PRIV_YES_FUNC_INIT_FAILED func_init_failed:
@@ -2312,73 +2371,73 @@ func                        \
 #define H5_PRIV_FUNC_INIT_FAILED(pkg_init) H5_GLUE3(H5_PRIV_, pkg_init, _FUNC_INIT_FAILED)
 
 /* Macros for leaving different scopes of routines */
-#define FUNC_LEAVE_PKGINIT                         \
-    /* Leave scope for this type of function */              \
-    }                        \
+#define FUNC_LEAVE_PKGINIT                                                    \
+    /* Leave scope for this type of function */                               \
+    }                                                                         \
                                                                               \
-    /* Pop the name of this function off the function stack */          \
+    /* Pop the name of this function off the function stack */                \
     H5_POP_FUNC
 
-#define FUNC_LEAVE_STATIC                         \
-    /* Leave scope for this type of function */              \
-    }                        \
+#define FUNC_LEAVE_STATIC                                                     \
+    /* Leave scope for this type of function */                               \
+    }                                                                         \
                                                                               \
-    /* Pop the name of this function off the function stack */          \
+    /* Pop the name of this function off the function stack */                \
     H5_POP_FUNC
 
-#define FUNC_LEAVE_PKG                           \
-    /* Leave scope for this type of function */              \
-    }                        \
+#define FUNC_LEAVE_PKG                                                        \
+    /* Leave scope for this type of function */                               \
+    }                                                                         \
                                                                               \
-    /* Pop the name of this function off the function stack */          \
+    /* Pop the name of this function off the function stack */                \
     H5_POP_FUNC
 
-#define FUNC_LEAVE_PRIV                           \
-    /* Leave scope for this type of function */              \
-    }}                        \
+#define FUNC_LEAVE_PRIV                                                       \
+    /* Leave scope for this type of function */                               \
+    }}                                                                        \
                                                                               \
-    /* Label for errors during FUNC_ENTER */              \
-    H5_PRIV_FUNC_INIT_FAILED(H5_MY_PKG_INIT)              \
+    /* Label for errors during FUNC_ENTER */                                  \
+    H5_PRIV_FUNC_INIT_FAILED(H5_MY_PKG_INIT)                                  \
                                                                               \
-    /* Pop the name of this function off the function stack */          \
+    /* Pop the name of this function off the function stack */                \
     H5_POP_FUNC
 
-#define FUNC_LEAVE_PUB                           \
-    /* Leave scope for this type of function */              \
-    }}}                        \
+#define FUNC_LEAVE_PUB                                                        \
+    /* Leave scope for this type of function */                               \
+    }}}                                                                       \
                                                                               \
-    /* Label for errors during FUNC_ENTER */              \
-func_init_failed:                    \
+    /* Label for errors during FUNC_ENTER */                                  \
+func_init_failed:                                                             \
                                                                               \
-    /* Dump error stack if an error occurred during API routine */        \
-    if(ret_value == fail_value)                  \
-        (void)H5E_dump_api_stack(TRUE);                \
+    /* Dump error stack if an error occurred during API routine */            \
+    if(ret_value == fail_value)                                               \
+        (void)H5E_dump_api_stack(TRUE);                                       \
                                                                               \
-    /* Finish the API tracing info */                \
-    H5TRACE_RETURN(ret_value);                  \
+    /* Finish the API tracing info */                                         \
+    H5TRACE_RETURN(ret_value);                                                \
                                                                               \
-    /* Pop the name of this function off the function stack */          \
-    H5_POP_FUNC                    \
+    /* Pop the name of this function off the function stack */                \
+    H5_POP_FUNC                                                               \
                                                                               \
-    /* Finish the MPE tracing info */                \
-    FINISH_MPE_LOG                    \
+    /* Finish the MPE tracing info */                                         \
+    FINISH_MPE_LOG                                                            \
                                                                               \
-    /* Check for leaving API routine */                \
-    HDassert(H5_api_entered_g);                  \
-    H5_api_entered_g = FALSE;                  \
+    /* Check for leaving API routine */                                       \
+    HDassert(H5_api_entered_g);                                               \
+    H5_api_entered_g = FALSE;                                                 \
                                                                               \
-    /* Release thread-safety semaphore */              \
+    /* Release thread-safety semaphore */                                     \
     FUNC_LEAVE_API_THREADSAFE
 
 /* Use this macro when leaving all functions */
-#define END_FUNC(scope)                    \
-    /* Scope-specific function conclusion */              \
-    H5_GLUE(FUNC_LEAVE_, scope)                  \
+#define END_FUNC(scope)                                                       \
+    /* Scope-specific function conclusion */                                  \
+    H5_GLUE(FUNC_LEAVE_, scope)                                               \
                                                                               \
-    /* Leave routine */                    \
-    return(ret_value);                    \
+    /* Leave routine */                                                       \
+    return(ret_value);                                                        \
                                                                               \
-    /* Close Function */                  \
+    /* Close Function */                                                      \
 }
 
 /* Macro to begin/end tagging (when FUNC_ENTER_*TAG macros are insufficient).
@@ -2387,23 +2446,13 @@ func_init_failed:                    \
     haddr_t prv_tag = HADDR_UNDEF;                                               \
     hid_t my_dxpl_id = dxpl;                                                     \
     if(H5AC_tag(my_dxpl_id, tag, &prv_tag) < 0)                                  \
-        HGOTO_ERROR(H5E_CACHE, H5E_CANTTAG, err, "unable to apply metadata tag")
+        HGOTO_ERROR(H5_MY_PKG_ERR, H5E_CANTTAG, err, "unable to apply metadata tag")
 
 #define H5_END_TAG(err)                                                          \
     if(H5AC_tag(my_dxpl_id, prv_tag, NULL) <0)                                   \
-        HGOTO_ERROR(H5E_CACHE, H5E_CANTTAG, err, "unable to apply metadata tag") \
+        HGOTO_ERROR(H5_MY_PKG_ERR, H5E_CANTTAG, err, "unable to apply metadata tag") \
 }
 
-/* Macro for "stringizing" an integer in the C preprocessor (use H5_TOSTRING) */
-/* (use H5_TOSTRING, H5_STRINGIZE is just part of the implementation) */
-#define H5_STRINGIZE(x) #x
-#define H5_TOSTRING(x) H5_STRINGIZE(x)
-
-/* Macro for "glueing" together items, for re-scanning macros */
-#define H5_GLUE(x,y)       x##y
-#define H5_GLUE3(x,y,z)    x##y##z
-#define H5_GLUE4(w,x,y,z)  w##x##y##z
-
 /* Compile-time "assert" macro */
 #define HDcompile_assert(e)     ((void)sizeof(char[ !!(e) ? 1 : -1]))
 /* Variants that are correct, but generate compile-time warnings in some circumstances:
@@ -2416,21 +2465,30 @@ H5_DLL herr_t H5_init_library(void);
 H5_DLL void H5_term_library(void);
 
 /* Functions to terminate interfaces */
-H5_DLL int H5A_term_interface(void);
-H5_DLL int H5AC_term_interface(void);
-H5_DLL int H5D_term_interface(void);
-H5_DLL int H5E_term_interface(void);
-H5_DLL int H5F_term_interface(void);
-H5_DLL int H5FS_term_interface(void);
-H5_DLL int H5G_term_interface(void);
-H5_DLL int H5I_term_interface(void);
-H5_DLL int H5L_term_interface(void);
-H5_DLL int H5P_term_interface(void);
-H5_DLL int H5PL_term_interface(void);
-H5_DLL int H5R_term_interface(void);
-H5_DLL int H5S_term_interface(void);
-H5_DLL int H5T_term_interface(void);
-H5_DLL int H5Z_term_interface(void);
+H5_DLL int H5A_term_package(void);
+H5_DLL int H5A_top_term_package(void);
+H5_DLL int H5AC_term_package(void);
+H5_DLL int H5D_term_package(void);
+H5_DLL int H5D_top_term_package(void);
+H5_DLL int H5E_term_package(void);
+H5_DLL int H5F_term_package(void);
+H5_DLL int H5FD_term_package(void);
+H5_DLL int H5FL_term_package(void);
+H5_DLL int H5FS_term_package(void);
+H5_DLL int H5G_term_package(void);
+H5_DLL int H5G_top_term_package(void);
+H5_DLL int H5I_term_package(void);
+H5_DLL int H5L_term_package(void);
+H5_DLL int H5P_term_package(void);
+H5_DLL int H5PL_term_package(void);
+H5_DLL int H5R_term_package(void);
+H5_DLL int H5R_top_term_package(void);
+H5_DLL int H5S_term_package(void);
+H5_DLL int H5S_top_term_package(void);
+H5_DLL int H5SL_term_package(void);
+H5_DLL int H5T_term_package(void);
+H5_DLL int H5T_top_term_package(void);
+H5_DLL int H5Z_term_package(void);
 
 /* Checksum functions */
 H5_DLL uint32_t H5_checksum_fletcher32(const void *data, size_t len);
diff --git a/src/H5public.h b/src/H5public.h
index 0650988..1c617d1 100644
--- a/src/H5public.h
+++ b/src/H5public.h
@@ -94,10 +94,10 @@ extern "C" {
 /* Version numbers */
 #define H5_VERS_MAJOR	1	/* For major interface/format changes  	     */
 #define H5_VERS_MINOR	9	/* For minor interface/format changes  	     */
-#define H5_VERS_RELEASE	231	/* For tweaks, bug-fixes, or development     */
+#define H5_VERS_RELEASE	232	/* For tweaks, bug-fixes, or development     */
 #define H5_VERS_SUBRELEASE ""	/* For pre-releases like snap0       */
 				/* Empty string for real releases.           */
-#define H5_VERS_INFO    "HDF5 library version: 1.9.231"      /* Full version string */
+#define H5_VERS_INFO    "HDF5 library version: 1.9.232"      /* Full version string */
 
 #define H5check()	H5check_version(H5_VERS_MAJOR,H5_VERS_MINOR,	      \
 				        H5_VERS_RELEASE)
diff --git a/src/H5trace.c b/src/H5trace.c
index 66b3a0c..f212bef 100644
--- a/src/H5trace.c
+++ b/src/H5trace.c
@@ -15,11 +15,11 @@
 
 /*-------------------------------------------------------------------------
  *
- * Created:		H5trace.c
- *			Aug 21 2006
- *			Quincey Koziol <koziol@hdfgroup.org>
+ * Created:     H5trace.c
+ *              Aug 21 2006
+ *              Quincey Koziol <koziol@hdfgroup.org>
  *
- * Purpose:		Internal code for tracing API calls
+ * Purpose:     Internal code for tracing API calls
  *
  *-------------------------------------------------------------------------
  */
@@ -27,18 +27,17 @@
 /****************/
 /* Module Setup */
 /****************/
-#define H5I_PACKAGE		/*suppress error about including H5Ipkg	  */
-
+#define H5I_FRIEND		/*suppress error about including H5Ipkg	  */
 
 /***********/
 /* Headers */
 /***********/
-#include "H5private.h"		/* Generic Functions			*/
-#include "H5Dprivate.h"		/* Datasets				*/
-#include "H5Eprivate.h"		/* Error handling		  	*/
-#include "H5FDprivate.h"	/* File drivers				*/
-#include "H5Ipkg.h"		/* IDs			  		*/
-#include "H5MMprivate.h"	/* Memory management			*/
+#include "H5private.h"      /* Generic Functions                        */
+#include "H5Dprivate.h"     /* Datasets                                 */
+#include "H5Eprivate.h"     /* Error handling                           */
+#include "H5FDprivate.h"    /* File drivers                             */
+#include "H5Ipkg.h"         /* IDs                                      */
+#include "H5MMprivate.h"    /* Memory management                        */
 
 #ifdef H5_HAVE_PARALLEL
 /* datatypes of predefined drivers needed by H5_trace() */
@@ -83,36 +82,36 @@
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5_trace
+ * Function:    H5_trace
  *
- * Purpose:	This function is called whenever an API function is called
- *		and tracing is turned on.  If RETURNING is non-zero then
- *		the caller is about to return and RETURNING points to the
+ * Purpose:     This function is called whenever an API function is called
+ *              and tracing is turned on.  If RETURNING is non-zero then
+ *              the caller is about to return and RETURNING points to the
  *              time for the corresponding function call event.  Otherwise
  *              we print the function name and the arguments.
  *
- *		The TYPE argument is a string which gives the type of each of
- *		the following argument pairs.  Each type is zero or more
- *		asterisks (one for each level of indirection, although some
- *		types have one level of indirection already implied) followed
- *		by either one letter (lower case) or two letters (first one
- *		uppercase).
+ *              The TYPE argument is a string which gives the type of each of
+ *              the following argument pairs.  Each type is zero or more
+ *              asterisks (one for each level of indirection, although some
+ *              types have one level of indirection already implied) followed
+ *              by either one letter (lower case) or two letters (first one
+ *              uppercase).
  *
- *		The variable argument list consists of pairs of values. Each
- *		pair is a string which is the formal argument name in the
- *		calling function, followed by the argument value.  The type
- *		of the argument value is given by the TYPE string.
+ *              The variable argument list consists of pairs of values. Each
+ *              pair is a string which is the formal argument name in the
+ *              calling function, followed by the argument value.  The type
+ *              of the argument value is given by the TYPE string.
  *
- * Note:	The TYPE string is meant to be terse and is generated by a
- *		separate perl script.
+ * Note:        The TYPE string is meant to be terse and is generated by a
+ *              separate perl script.
  *
- * WARNING:	DO NOT CALL ANY HDF5 FUNCTION THAT CALLS FUNC_ENTER(). DOING
- *		SO MAY CAUSE H5_trace() TO BE INVOKED RECURSIVELY OR MAY
- *		CAUSE LIBRARY INITIALIZATIONS THAT ARE NOT DESIRED.
+ * WARNING:     DO NOT CALL ANY HDF5 FUNCTION THAT CALLS FUNC_ENTER(). DOING
+ *              SO MAY CAUSE H5_trace() TO BE INVOKED RECURSIVELY OR MAY
+ *              CAUSE LIBRARY INITIALIZATIONS THAT ARE NOT DESIRED.
  *
- * Return:	Execution time for an API call
+ * Return:      Execution time for an API call
  *
- * Programmer:	Robb Matzke
+ * Programmer:  Robb Matzke
  *              Tuesday, June 16, 1998
  *
  *-------------------------------------------------------------------------
@@ -120,14 +119,14 @@
 double
 H5_trace(const double *returning, const char *func, const char *type, ...)
 {
-    va_list		ap;
-    char		buf[64], *rest;
-    const char		*argname;
-    int			argno = 0, ptr, asize_idx;
-    hssize_t		asize[16];
-    hssize_t		i;
-    void		*vp = NULL;
-    FILE		*out = H5_debug_g.trace;
+    va_list             ap;
+    char                buf[64], *rest;
+    const char          *argname;
+    int                 argno = 0, ptr, asize_idx;
+    hssize_t            asize[16];
+    hssize_t            i;
+    void                *vp = NULL;
+    FILE                *out = H5_debug_g.trace;
     H5_timer_t          event_time;
     static H5_timer_t   first_time = {0.0F, 0.0F, 0.0F};
     static int          current_depth = 0;
@@ -206,48 +205,48 @@ H5_trace(const double *returning, const char *func, const char *type, ...)
 
     /* Parse the argument types */
     for(argno = 0; *type; argno++, type += (HDisupper(*type) ? 2 : 1)) {
-	/* Count levels of indirection */
-	for(ptr = 0; '*' == *type; type++)
+        /* Count levels of indirection */
+        for(ptr = 0; '*' == *type; type++)
             ptr++;
-	if('[' == *type) {
-	    if('a' == type[1]) {
-		asize_idx = (int)HDstrtol(type + 2, &rest, 10);
+        if('[' == *type) {
+            if('a' == type[1]) {
+                asize_idx = (int)HDstrtol(type + 2, &rest, 10);
                 HDassert(0 <= asize_idx && asize_idx < (int) NELMTS(asize));
-		HDassert(']'==*rest);
-		type = rest + 1;
-	    } else {
-		rest = (char *)HDstrchr(type, ']');
-		HDassert(rest);
-		type = rest + 1;
-		asize_idx = -1;
-	    }
-	} /* end if */
+                HDassert(']'==*rest);
+                type = rest + 1;
+            } else {
+                rest = (char *)HDstrchr(type, ']');
+                HDassert(rest);
+                type = rest + 1;
+                asize_idx = -1;
+            }
+        } /* end if */
         else
-	    asize_idx = -1;
-
-	/*
-	 * The argument name.  Leave off the `_id' part.  If the argument
-	 * name is the null pointer then don't print the argument or the
-	 * following `='.  This is used for return values.
-	 */
-	argname = va_arg(ap, char *); /*lint !e64 Type mismatch not really occuring */
-	if(argname) {
-	    unsigned n = (unsigned)MAX (0, (int)HDstrlen(argname) - 3); /*lint !e666 Allow expression with side effects */
-
-	    if(!HDstrcmp(argname + n, "_id")) {
-		HDstrncpy(buf, argname, (size_t)MIN((int)sizeof(buf) - 1, n));
-		buf[MIN((int)sizeof(buf) - 1, n)] = '\0';
-		argname = buf;
-	    } /* end if */
-	    fprintf(out, "%s%s=", argno?", ":"", argname);
-	} /* end if */
+            asize_idx = -1;
+
+        /*
+         * The argument name.  Leave off the `_id' part.  If the argument
+         * name is the null pointer then don't print the argument or the
+         * following `='.  This is used for return values.
+         */
+        argname = va_arg(ap, char *); /*lint !e64 Type mismatch not really occuring */
+        if(argname) {
+            unsigned n = (unsigned)MAX (0, (int)HDstrlen(argname) - 3); /*lint !e666 Allow expression with side effects */
+
+            if(!HDstrcmp(argname + n, "_id")) {
+                HDstrncpy(buf, argname, (size_t)MIN((int)sizeof(buf) - 1, n));
+                buf[MIN((int)sizeof(buf) - 1, n)] = '\0';
+                argname = buf;
+            } /* end if */
+                fprintf(out, "%s%s=", argno?", ":"", argname);
+        } /* end if */
         else
-	    argname = "";
+            argname = "";
 
-	/* The value */
-	if(ptr)
+        /* The value */
+        if(ptr)
             vp = va_arg(ap, void *); /*lint !e64 Type mismatch not really occuring */
-	switch(type[0]) {
+        switch(type[0]) {
             case 'a':
                 if(ptr) {
                     if(vp)
@@ -268,7 +267,7 @@ H5_trace(const double *returning, const char *func, const char *type, ...)
                         fprintf(out, "0x%lx", (unsigned long)vp);
                     else
                         fprintf(out, "NULL");
-                } /* end if */
+                    } /* end if */
                 else {
                     hbool_t bool_var = va_arg(ap, hbool_t); /*lint !e732 Loss of sign not really occuring */
 
@@ -2588,7 +2587,7 @@ H5_trace(const double *returning, const char *func, const char *type, ...)
                 else
                     fprintf(out, "BADTYPE(%c)", type[0]);
                 goto error;
-	} /* end switch */
+        } /* end switch */
     } /* end for */
 
     /* Display event time for return */
@@ -2599,10 +2598,10 @@ H5_trace(const double *returning, const char *func, const char *type, ...)
 error:
     va_end(ap);
     if(returning)
-	fprintf(out, ";\n");
+        fprintf(out, ";\n");
     else {
-	last_call_depth = current_depth++;
-	fprintf (out, ")");
+        last_call_depth = current_depth++;
+        fprintf (out, ")");
     } /* end else */
     HDfflush(out);
 
diff --git a/src/H5version.h b/src/H5version.h
deleted file mode 100644
index b955a8f..0000000
--- a/src/H5version.h
+++ /dev/null
@@ -1,564 +0,0 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group.                                               *
- * Copyright by the Board of Trustees of the University of Illinois.         *
- * All rights reserved.                                                      *
- *                                                                           *
- * This file is part of HDF5.  The full HDF5 copyright notice, including     *
- * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-/* Generated automatically by bin/make_vers -- do not edit */
-/* Add new versioned symbols to H5vers.txt file */
-
-
-#ifndef _H5version_H
-#define _H5version_H
-
-/* Issue error if contradicting macros have been defined. */
-#if (defined(H5_USE_16_API) || defined(H5_USE_18_API)) && defined(H5_NO_DEPRECATED_SYMBOLS)
-  #error "Can't choose old API versions when deprecated APIs are disabled"
-#endif /* (defined(H5_USE_16_API) || defined(H5_USE_18_API)) && defined(H5_NO_DEPRECATED_SYMBOLS) */
-
-
-/* If a particular "global" version of the library's interfaces is chosen,
- *      set the versions for the API symbols affected.
- *
- * Note: If an application has already chosen a particular version for an
- *      API symbol, the individual API version macro takes priority.
- */
-#if defined(H5_USE_16_API_DEFAULT) && !defined(H5_USE_16_API)
-  #define H5_USE_16_API 1
-#endif /* H5_USE_16_API_DEFAULT && !H5_USE_16_API */
-
-#if defined(H5_USE_18_API_DEFAULT) && !defined(H5_USE_18_API)
-  #define H5_USE_18_API 1
-#endif /* H5_USE_18_API_DEFAULT && !H5_USE_18_API */
-
-
-#ifdef H5_USE_16_API
-
-/*************/
-/* Functions */
-/*************/
-
-#if !defined(H5Acreate_vers)
-  #define H5Acreate_vers 1
-#endif /* !defined(H5Acreate_vers) */
-
-#if !defined(H5Aiterate_vers)
-  #define H5Aiterate_vers 1
-#endif /* !defined(H5Aiterate_vers) */
-
-#if !defined(H5Dcreate_vers)
-  #define H5Dcreate_vers 1
-#endif /* !defined(H5Dcreate_vers) */
-
-#if !defined(H5Dopen_vers)
-  #define H5Dopen_vers 1
-#endif /* !defined(H5Dopen_vers) */
-
-#if !defined(H5Eclear_vers)
-  #define H5Eclear_vers 1
-#endif /* !defined(H5Eclear_vers) */
-
-#if !defined(H5Eget_auto_vers)
-  #define H5Eget_auto_vers 1
-#endif /* !defined(H5Eget_auto_vers) */
-
-#if !defined(H5Eprint_vers)
-  #define H5Eprint_vers 1
-#endif /* !defined(H5Eprint_vers) */
-
-#if !defined(H5Epush_vers)
-  #define H5Epush_vers 1
-#endif /* !defined(H5Epush_vers) */
-
-#if !defined(H5Eset_auto_vers)
-  #define H5Eset_auto_vers 1
-#endif /* !defined(H5Eset_auto_vers) */
-
-#if !defined(H5Ewalk_vers)
-  #define H5Ewalk_vers 1
-#endif /* !defined(H5Ewalk_vers) */
-
-#if !defined(H5Gcreate_vers)
-  #define H5Gcreate_vers 1
-#endif /* !defined(H5Gcreate_vers) */
-
-#if !defined(H5Gopen_vers)
-  #define H5Gopen_vers 1
-#endif /* !defined(H5Gopen_vers) */
-
-#if !defined(H5Pget_filter_vers)
-  #define H5Pget_filter_vers 1
-#endif /* !defined(H5Pget_filter_vers) */
-
-#if !defined(H5Pget_filter_by_id_vers)
-  #define H5Pget_filter_by_id_vers 1
-#endif /* !defined(H5Pget_filter_by_id_vers) */
-
-#if !defined(H5Pinsert_vers)
-  #define H5Pinsert_vers 1
-#endif /* !defined(H5Pinsert_vers) */
-
-#if !defined(H5Pregister_vers)
-  #define H5Pregister_vers 1
-#endif /* !defined(H5Pregister_vers) */
-
-#if !defined(H5Rdereference_vers)
-  #define H5Rdereference_vers 1
-#endif /* !defined(H5Rdereference_vers) */
-
-#if !defined(H5Rget_obj_type_vers)
-  #define H5Rget_obj_type_vers 1
-#endif /* !defined(H5Rget_obj_type_vers) */
-
-#if !defined(H5Tarray_create_vers)
-  #define H5Tarray_create_vers 1
-#endif /* !defined(H5Tarray_create_vers) */
-
-#if !defined(H5Tcommit_vers)
-  #define H5Tcommit_vers 1
-#endif /* !defined(H5Tcommit_vers) */
-
-#if !defined(H5Tget_array_dims_vers)
-  #define H5Tget_array_dims_vers 1
-#endif /* !defined(H5Tget_array_dims_vers) */
-
-#if !defined(H5Topen_vers)
-  #define H5Topen_vers 1
-#endif /* !defined(H5Topen_vers) */
-
-/************/
-/* Typedefs */
-/************/
-
-#if !defined(H5E_auto_t_vers)
-  #define H5E_auto_t_vers 1
-#endif /* !defined(H5E_auto_t_vers) */
-
-#if !defined(H5Z_class_t_vers)
-  #define H5Z_class_t_vers 1
-#endif /* !defined(H5Z_class_t_vers) */
-
-#endif /* H5_USE_16_API */
-
-#ifdef H5_USE_18_API
-
-/*************/
-/* Functions */
-/*************/
-
-#if !defined(H5Acreate_vers)
-  #define H5Acreate_vers 2
-#endif /* !defined(H5Acreate_vers) */
-
-#if !defined(H5Aiterate_vers)
-  #define H5Aiterate_vers 2
-#endif /* !defined(H5Aiterate_vers) */
-
-#if !defined(H5Dcreate_vers)
-  #define H5Dcreate_vers 2
-#endif /* !defined(H5Dcreate_vers) */
-
-#if !defined(H5Dopen_vers)
-  #define H5Dopen_vers 2
-#endif /* !defined(H5Dopen_vers) */
-
-#if !defined(H5Eclear_vers)
-  #define H5Eclear_vers 2
-#endif /* !defined(H5Eclear_vers) */
-
-#if !defined(H5Eget_auto_vers)
-  #define H5Eget_auto_vers 2
-#endif /* !defined(H5Eget_auto_vers) */
-
-#if !defined(H5Eprint_vers)
-  #define H5Eprint_vers 2
-#endif /* !defined(H5Eprint_vers) */
-
-#if !defined(H5Epush_vers)
-  #define H5Epush_vers 2
-#endif /* !defined(H5Epush_vers) */
-
-#if !defined(H5Eset_auto_vers)
-  #define H5Eset_auto_vers 2
-#endif /* !defined(H5Eset_auto_vers) */
-
-#if !defined(H5Ewalk_vers)
-  #define H5Ewalk_vers 2
-#endif /* !defined(H5Ewalk_vers) */
-
-#if !defined(H5Fget_info_vers)
-  #define H5Fget_info_vers 1
-#endif /* !defined(H5Fget_info_vers) */
-
-#if !defined(H5Gcreate_vers)
-  #define H5Gcreate_vers 2
-#endif /* !defined(H5Gcreate_vers) */
-
-#if !defined(H5Gopen_vers)
-  #define H5Gopen_vers 2
-#endif /* !defined(H5Gopen_vers) */
-
-#if !defined(H5Pget_filter_vers)
-  #define H5Pget_filter_vers 2
-#endif /* !defined(H5Pget_filter_vers) */
-
-#if !defined(H5Pget_filter_by_id_vers)
-  #define H5Pget_filter_by_id_vers 2
-#endif /* !defined(H5Pget_filter_by_id_vers) */
-
-#if !defined(H5Pinsert_vers)
-  #define H5Pinsert_vers 2
-#endif /* !defined(H5Pinsert_vers) */
-
-#if !defined(H5Pregister_vers)
-  #define H5Pregister_vers 2
-#endif /* !defined(H5Pregister_vers) */
-
-#if !defined(H5Rdereference_vers)
-  #define H5Rdereference_vers 1
-#endif /* !defined(H5Rdereference_vers) */
-
-#if !defined(H5Rget_obj_type_vers)
-  #define H5Rget_obj_type_vers 2
-#endif /* !defined(H5Rget_obj_type_vers) */
-
-#if !defined(H5Tarray_create_vers)
-  #define H5Tarray_create_vers 2
-#endif /* !defined(H5Tarray_create_vers) */
-
-#if !defined(H5Tcommit_vers)
-  #define H5Tcommit_vers 2
-#endif /* !defined(H5Tcommit_vers) */
-
-#if !defined(H5Tget_array_dims_vers)
-  #define H5Tget_array_dims_vers 2
-#endif /* !defined(H5Tget_array_dims_vers) */
-
-#if !defined(H5Topen_vers)
-  #define H5Topen_vers 2
-#endif /* !defined(H5Topen_vers) */
-
-/************/
-/* Typedefs */
-/************/
-
-#if !defined(H5E_auto_t_vers)
-  #define H5E_auto_t_vers 2
-#endif /* !defined(H5E_auto_t_vers) */
-
-#if !defined(H5Z_class_t_vers)
-  #define H5Z_class_t_vers 2
-#endif /* !defined(H5Z_class_t_vers) */
-
-#endif /* H5_USE_18_API */
-
-
-/* Choose the correct version of each API symbol, defaulting to the latest
- *      version of each.  The "best" name for API parameters/data structures
- *      that have changed definitions is also set.  An error is issued for
- *      specifying an invalid API version.
- */
-
-/*************/
-/* Functions */
-/*************/
-
-#if !defined(H5Acreate_vers) || H5Acreate_vers == 2
-  #ifndef H5Acreate_vers
-    #define H5Acreate_vers 2
-  #endif /* H5Acreate_vers */
-  #define H5Acreate H5Acreate2
-#elif H5Acreate_vers == 1
-  #define H5Acreate H5Acreate1
-#else /* H5Acreate_vers */
-  #error "H5Acreate_vers set to invalid value"
-#endif /* H5Acreate_vers */
-
-#if !defined(H5Aiterate_vers) || H5Aiterate_vers == 2
-  #ifndef H5Aiterate_vers
-    #define H5Aiterate_vers 2
-  #endif /* H5Aiterate_vers */
-  #define H5Aiterate H5Aiterate2
-  #define H5A_operator_t H5A_operator2_t
-#elif H5Aiterate_vers == 1
-  #define H5Aiterate H5Aiterate1
-  #define H5A_operator_t H5A_operator1_t
-#else /* H5Aiterate_vers */
-  #error "H5Aiterate_vers set to invalid value"
-#endif /* H5Aiterate_vers */
-
-#if !defined(H5Dcreate_vers) || H5Dcreate_vers == 2
-  #ifndef H5Dcreate_vers
-    #define H5Dcreate_vers 2
-  #endif /* H5Dcreate_vers */
-  #define H5Dcreate H5Dcreate2
-#elif H5Dcreate_vers == 1
-  #define H5Dcreate H5Dcreate1
-#else /* H5Dcreate_vers */
-  #error "H5Dcreate_vers set to invalid value"
-#endif /* H5Dcreate_vers */
-
-#if !defined(H5Dopen_vers) || H5Dopen_vers == 2
-  #ifndef H5Dopen_vers
-    #define H5Dopen_vers 2
-  #endif /* H5Dopen_vers */
-  #define H5Dopen H5Dopen2
-#elif H5Dopen_vers == 1
-  #define H5Dopen H5Dopen1
-#else /* H5Dopen_vers */
-  #error "H5Dopen_vers set to invalid value"
-#endif /* H5Dopen_vers */
-
-#if !defined(H5Eclear_vers) || H5Eclear_vers == 2
-  #ifndef H5Eclear_vers
-    #define H5Eclear_vers 2
-  #endif /* H5Eclear_vers */
-  #define H5Eclear H5Eclear2
-#elif H5Eclear_vers == 1
-  #define H5Eclear H5Eclear1
-#else /* H5Eclear_vers */
-  #error "H5Eclear_vers set to invalid value"
-#endif /* H5Eclear_vers */
-
-#if !defined(H5Eget_auto_vers) || H5Eget_auto_vers == 2
-  #ifndef H5Eget_auto_vers
-    #define H5Eget_auto_vers 2
-  #endif /* H5Eget_auto_vers */
-  #define H5Eget_auto H5Eget_auto2
-#elif H5Eget_auto_vers == 1
-  #define H5Eget_auto H5Eget_auto1
-#else /* H5Eget_auto_vers */
-  #error "H5Eget_auto_vers set to invalid value"
-#endif /* H5Eget_auto_vers */
-
-#if !defined(H5Eprint_vers) || H5Eprint_vers == 2
-  #ifndef H5Eprint_vers
-    #define H5Eprint_vers 2
-  #endif /* H5Eprint_vers */
-  #define H5Eprint H5Eprint2
-#elif H5Eprint_vers == 1
-  #define H5Eprint H5Eprint1
-#else /* H5Eprint_vers */
-  #error "H5Eprint_vers set to invalid value"
-#endif /* H5Eprint_vers */
-
-#if !defined(H5Epush_vers) || H5Epush_vers == 2
-  #ifndef H5Epush_vers
-    #define H5Epush_vers 2
-  #endif /* H5Epush_vers */
-  #define H5Epush H5Epush2
-#elif H5Epush_vers == 1
-  #define H5Epush H5Epush1
-#else /* H5Epush_vers */
-  #error "H5Epush_vers set to invalid value"
-#endif /* H5Epush_vers */
-
-#if !defined(H5Eset_auto_vers) || H5Eset_auto_vers == 2
-  #ifndef H5Eset_auto_vers
-    #define H5Eset_auto_vers 2
-  #endif /* H5Eset_auto_vers */
-  #define H5Eset_auto H5Eset_auto2
-#elif H5Eset_auto_vers == 1
-  #define H5Eset_auto H5Eset_auto1
-#else /* H5Eset_auto_vers */
-  #error "H5Eset_auto_vers set to invalid value"
-#endif /* H5Eset_auto_vers */
-
-#if !defined(H5Ewalk_vers) || H5Ewalk_vers == 2
-  #ifndef H5Ewalk_vers
-    #define H5Ewalk_vers 2
-  #endif /* H5Ewalk_vers */
-  #define H5Ewalk H5Ewalk2
-  #define H5E_error_t H5E_error2_t
-  #define H5E_walk_t H5E_walk2_t
-#elif H5Ewalk_vers == 1
-  #define H5Ewalk H5Ewalk1
-  #define H5E_error_t H5E_error1_t
-  #define H5E_walk_t H5E_walk1_t
-#else /* H5Ewalk_vers */
-  #error "H5Ewalk_vers set to invalid value"
-#endif /* H5Ewalk_vers */
-
-#if !defined(H5Fget_info_vers) || H5Fget_info_vers == 2
-  #ifndef H5Fget_info_vers
-    #define H5Fget_info_vers 2
-  #endif /* H5Fget_info_vers */
-  #define H5Fget_info H5Fget_info2
-  #define H5F_info_t H5F_info2_t
-#elif H5Fget_info_vers == 1
-  #define H5Fget_info H5Fget_info1
-  #define H5F_info_t H5F_info1_t
-#else /* H5Fget_info_vers */
-  #error "H5Fget_info_vers set to invalid value"
-#endif /* H5Fget_info_vers */
-
-#if !defined(H5Gcreate_vers) || H5Gcreate_vers == 2
-  #ifndef H5Gcreate_vers
-    #define H5Gcreate_vers 2
-  #endif /* H5Gcreate_vers */
-  #define H5Gcreate H5Gcreate2
-#elif H5Gcreate_vers == 1
-  #define H5Gcreate H5Gcreate1
-#else /* H5Gcreate_vers */
-  #error "H5Gcreate_vers set to invalid value"
-#endif /* H5Gcreate_vers */
-
-#if !defined(H5Gopen_vers) || H5Gopen_vers == 2
-  #ifndef H5Gopen_vers
-    #define H5Gopen_vers 2
-  #endif /* H5Gopen_vers */
-  #define H5Gopen H5Gopen2
-#elif H5Gopen_vers == 1
-  #define H5Gopen H5Gopen1
-#else /* H5Gopen_vers */
-  #error "H5Gopen_vers set to invalid value"
-#endif /* H5Gopen_vers */
-
-#if !defined(H5Pget_filter_vers) || H5Pget_filter_vers == 2
-  #ifndef H5Pget_filter_vers
-    #define H5Pget_filter_vers 2
-  #endif /* H5Pget_filter_vers */
-  #define H5Pget_filter H5Pget_filter2
-#elif H5Pget_filter_vers == 1
-  #define H5Pget_filter H5Pget_filter1
-#else /* H5Pget_filter_vers */
-  #error "H5Pget_filter_vers set to invalid value"
-#endif /* H5Pget_filter_vers */
-
-#if !defined(H5Pget_filter_by_id_vers) || H5Pget_filter_by_id_vers == 2
-  #ifndef H5Pget_filter_by_id_vers
-    #define H5Pget_filter_by_id_vers 2
-  #endif /* H5Pget_filter_by_id_vers */
-  #define H5Pget_filter_by_id H5Pget_filter_by_id2
-#elif H5Pget_filter_by_id_vers == 1
-  #define H5Pget_filter_by_id H5Pget_filter_by_id1
-#else /* H5Pget_filter_by_id_vers */
-  #error "H5Pget_filter_by_id_vers set to invalid value"
-#endif /* H5Pget_filter_by_id_vers */
-
-#if !defined(H5Pinsert_vers) || H5Pinsert_vers == 2
-  #ifndef H5Pinsert_vers
-    #define H5Pinsert_vers 2
-  #endif /* H5Pinsert_vers */
-  #define H5Pinsert H5Pinsert2
-#elif H5Pinsert_vers == 1
-  #define H5Pinsert H5Pinsert1
-#else /* H5Pinsert_vers */
-  #error "H5Pinsert_vers set to invalid value"
-#endif /* H5Pinsert_vers */
-
-#if !defined(H5Pregister_vers) || H5Pregister_vers == 2
-  #ifndef H5Pregister_vers
-    #define H5Pregister_vers 2
-  #endif /* H5Pregister_vers */
-  #define H5Pregister H5Pregister2
-#elif H5Pregister_vers == 1
-  #define H5Pregister H5Pregister1
-#else /* H5Pregister_vers */
-  #error "H5Pregister_vers set to invalid value"
-#endif /* H5Pregister_vers */
-
-#if !defined(H5Rdereference_vers) || H5Rdereference_vers == 2
-  #ifndef H5Rdereference_vers
-    #define H5Rdereference_vers 2
-  #endif /* H5Rdereference_vers */
-  #define H5Rdereference H5Rdereference2
-#elif H5Rdereference_vers == 1
-  #define H5Rdereference H5Rdereference1
-#else /* H5Rdereference_vers */
-  #error "H5Rdereference_vers set to invalid value"
-#endif /* H5Rdereference_vers */
-
-#if !defined(H5Rget_obj_type_vers) || H5Rget_obj_type_vers == 2
-  #ifndef H5Rget_obj_type_vers
-    #define H5Rget_obj_type_vers 2
-  #endif /* H5Rget_obj_type_vers */
-  #define H5Rget_obj_type H5Rget_obj_type2
-#elif H5Rget_obj_type_vers == 1
-  #define H5Rget_obj_type H5Rget_obj_type1
-#else /* H5Rget_obj_type_vers */
-  #error "H5Rget_obj_type_vers set to invalid value"
-#endif /* H5Rget_obj_type_vers */
-
-#if !defined(H5Tarray_create_vers) || H5Tarray_create_vers == 2
-  #ifndef H5Tarray_create_vers
-    #define H5Tarray_create_vers 2
-  #endif /* H5Tarray_create_vers */
-  #define H5Tarray_create H5Tarray_create2
-#elif H5Tarray_create_vers == 1
-  #define H5Tarray_create H5Tarray_create1
-#else /* H5Tarray_create_vers */
-  #error "H5Tarray_create_vers set to invalid value"
-#endif /* H5Tarray_create_vers */
-
-#if !defined(H5Tcommit_vers) || H5Tcommit_vers == 2
-  #ifndef H5Tcommit_vers
-    #define H5Tcommit_vers 2
-  #endif /* H5Tcommit_vers */
-  #define H5Tcommit H5Tcommit2
-#elif H5Tcommit_vers == 1
-  #define H5Tcommit H5Tcommit1
-#else /* H5Tcommit_vers */
-  #error "H5Tcommit_vers set to invalid value"
-#endif /* H5Tcommit_vers */
-
-#if !defined(H5Tget_array_dims_vers) || H5Tget_array_dims_vers == 2
-  #ifndef H5Tget_array_dims_vers
-    #define H5Tget_array_dims_vers 2
-  #endif /* H5Tget_array_dims_vers */
-  #define H5Tget_array_dims H5Tget_array_dims2
-#elif H5Tget_array_dims_vers == 1
-  #define H5Tget_array_dims H5Tget_array_dims1
-#else /* H5Tget_array_dims_vers */
-  #error "H5Tget_array_dims_vers set to invalid value"
-#endif /* H5Tget_array_dims_vers */
-
-#if !defined(H5Topen_vers) || H5Topen_vers == 2
-  #ifndef H5Topen_vers
-    #define H5Topen_vers 2
-  #endif /* H5Topen_vers */
-  #define H5Topen H5Topen2
-#elif H5Topen_vers == 1
-  #define H5Topen H5Topen1
-#else /* H5Topen_vers */
-  #error "H5Topen_vers set to invalid value"
-#endif /* H5Topen_vers */
-
-/************/
-/* Typedefs */
-/************/
-
-#if !defined(H5E_auto_t_vers) || H5E_auto_t_vers == 2
-  #ifndef H5E_auto_t_vers
-    #define H5E_auto_t_vers 2
-  #endif /* H5E_auto_t_vers */
-  #define H5E_auto_t H5E_auto2_t
-#elif H5E_auto_t_vers == 1
-  #define H5E_auto_t H5E_auto1_t
-#else /* H5E_auto_t_vers */
-  #error "H5E_auto_t_vers set to invalid value"
-#endif /* H5E_auto_t_vers */
-
-
-#if !defined(H5Z_class_t_vers) || H5Z_class_t_vers == 2
-  #ifndef H5Z_class_t_vers
-    #define H5Z_class_t_vers 2
-  #endif /* H5Z_class_t_vers */
-  #define H5Z_class_t H5Z_class2_t
-#elif H5Z_class_t_vers == 1
-  #define H5Z_class_t H5Z_class1_t
-#else /* H5Z_class_t_vers */
-  #error "H5Z_class_t_vers set to invalid value"
-#endif /* H5Z_class_t_vers */
-
-#endif /* H5version_H */
-
diff --git a/src/Makefile.am b/src/Makefile.am
index 662b9a8..86dad23 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -42,26 +42,26 @@ DISTCLEANFILES=H5pubconf.h
 # library sources
 libhdf5_la_SOURCES= H5.c H5checksum.c H5dbg.c H5system.c H5timer.c H5trace.c \
         H5A.c H5Abtree2.c H5Adense.c H5Adeprec.c H5Aint.c H5Atest.c \
-        H5AC.c H5ACmpio.c \
+        H5AC.c \
         H5B.c H5Bcache.c H5Bdbg.c \
         H5B2.c H5B2cache.c H5B2dbg.c H5B2hdr.c H5B2int.c H5B2stat.c H5B2test.c \
-        H5C.c H5Cmpio.c \
+        H5C.c \
         H5CS.c \
         H5D.c H5Dbtree.c H5Dchunk.c H5Dcompact.c H5Dcontig.c H5Ddbg.c \
         H5Ddeprec.c H5Defl.c H5Dfill.c H5Dint.c \
         H5Dio.c H5Dlayout.c \
-        H5Dmpio.c H5Doh.c H5Dscatgath.c H5Dselect.c H5Dtest.c H5Dvirtual.c \
+        H5Doh.c H5Dscatgath.c H5Dselect.c H5Dtest.c H5Dvirtual.c \
         H5E.c H5Edeprec.c H5Eint.c \
         H5EA.c H5EAcache.c H5EAdbg.c H5EAdblkpage.c H5EAdblock.c H5EAhdr.c \
         H5EAiblock.c H5EAint.c H5EAsblock.c H5EAstat.c H5EAtest.c \
         H5F.c H5Fint.c H5Faccum.c H5Fcwfs.c \
         H5Fdbg.c H5Fdeprec.c H5Fefc.c H5Ffake.c H5Fio.c \
-        H5Fmount.c H5Fmpi.c H5Fquery.c \
+        H5Fmount.c H5Fquery.c \
         H5Fsfile.c H5Fsuper.c H5Fsuper_cache.c H5Ftest.c \
         H5FA.c H5FAcache.c H5FAdbg.c H5FAdblock.c H5FAdblkpage.c H5FAhdr.c \
         H5FAstat.c H5FAtest.c \
         H5FD.c H5FDcore.c  \
-        H5FDdirect.c H5FDfamily.c H5FDint.c H5FDlog.c H5FDmpi.c H5FDmpio.c \
+        H5FDfamily.c H5FDint.c H5FDlog.c \
         H5FDmulti.c H5FDsec2.c H5FDspace.c H5FDstdio.c \
         H5FL.c H5FO.c H5FS.c H5FScache.c H5FSdbg.c H5FSsection.c H5FSstat.c H5FStest.c \
         H5G.c H5Gbtree2.c H5Gcache.c \
@@ -95,7 +95,7 @@ libhdf5_la_SOURCES= H5.c H5checksum.c H5dbg.c H5system.c H5timer.c H5trace.c \
         H5R.c H5Rdeprec.c \
         H5UC.c \
         H5RS.c \
-        H5S.c H5Sall.c H5Sdbg.c H5Shyper.c H5Smpio.c H5Snone.c H5Spoint.c \
+        H5S.c H5Sall.c H5Sdbg.c H5Shyper.c H5Snone.c H5Spoint.c \
         H5Sselect.c H5Stest.c \
         H5SL.c \
         H5SM.c H5SMbtree2.c H5SMcache.c H5SMmessage.c H5SMtest.c \
@@ -107,9 +107,18 @@ libhdf5_la_SOURCES= H5.c H5checksum.c H5dbg.c H5system.c H5timer.c H5trace.c \
         H5Topaque.c \
         H5Torder.c \
         H5Tpad.c H5Tprecis.c H5Tstrpad.c H5Tvisit.c H5Tvlen.c H5TS.c H5VM.c H5WB.c H5Z.c  \
-        H5Zdeflate.c H5Zfletcher32.c H5Znbit.c H5Zshuffle.c H5Zszip.c  \
-        H5Zscaleoffset.c H5Ztrans.c
-
+        H5Zdeflate.c H5Zfletcher32.c H5Znbit.c H5Zshuffle.c \
+        H5Zscaleoffset.c H5Zszip.c H5Ztrans.c
+
+# Only compile parallel sources if necessary
+if BUILD_PARALLEL_CONDITIONAL
+    libhdf5_la_SOURCES += H5ACmpio.c H5Cmpio.c H5Dmpio.c H5Fmpi.c H5FDmpi.c H5FDmpio.c H5Smpio.c
+endif
+
+# Only compile the direct VFD if necessary
+if DIRECT_VFD_CONDITIONAL
+    libhdf5_la_SOURCES += H5FDdirect.c
+endif
 
 # Public headers
 include_HEADERS = hdf5.h H5api_adpt.h H5overflow.h H5pubconf.h H5public.h H5version.h \
diff --git a/src/Makefile.in b/src/Makefile.in
index 8741540..9c21e0e 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -35,7 +35,17 @@
 
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -98,22 +108,26 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/lt_vers.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(srcdir)/H5config.h.in \
-	$(top_srcdir)/bin/mkinstalldirs $(srcdir)/libhdf5.settings.in \
-	$(top_srcdir)/bin/depcomp $(include_HEADERS) \
-	$(top_srcdir)/bin/test-driver COPYING
 noinst_PROGRAMS = H5detect$(EXEEXT) H5make_libsettings$(EXEEXT)
+
+# Only compile parallel sources if necessary
+@BUILD_PARALLEL_CONDITIONAL_TRUE@am__append_1 = H5ACmpio.c H5Cmpio.c H5Dmpio.c H5Fmpi.c H5FDmpi.c H5FDmpio.c H5Smpio.c
+
+# Only compile the direct VFD if necessary
+@DIRECT_VFD_CONDITIONAL_TRUE@am__append_2 = H5FDdirect.c
 TESTS =
 subdir = src
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(include_HEADERS) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = H5config.h $(top_builddir)/fortran/src/H5config_f.inc
 CONFIG_CLEAN_FILES = libhdf5.settings
 CONFIG_CLEAN_VPATH_FILES =
@@ -148,59 +162,111 @@ am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(settingsdir)" \
 	"$(DESTDIR)$(includedir)"
 LTLIBRARIES = $(lib_LTLIBRARIES)
 libhdf5_la_LIBADD =
+am__libhdf5_la_SOURCES_DIST = H5.c H5checksum.c H5dbg.c H5system.c \
+	H5timer.c H5trace.c H5A.c H5Abtree2.c H5Adense.c H5Adeprec.c \
+	H5Aint.c H5Atest.c H5AC.c H5B.c H5Bcache.c H5Bdbg.c H5B2.c \
+	H5B2cache.c H5B2dbg.c H5B2hdr.c H5B2int.c H5B2stat.c \
+	H5B2test.c H5C.c H5CS.c H5D.c H5Dbtree.c H5Dchunk.c \
+	H5Dcompact.c H5Dcontig.c H5Ddbg.c H5Ddeprec.c H5Defl.c \
+	H5Dfill.c H5Dint.c H5Dio.c H5Dlayout.c H5Doh.c H5Dscatgath.c \
+	H5Dselect.c H5Dtest.c H5Dvirtual.c H5E.c H5Edeprec.c H5Eint.c \
+	H5EA.c H5EAcache.c H5EAdbg.c H5EAdblkpage.c H5EAdblock.c \
+	H5EAhdr.c H5EAiblock.c H5EAint.c H5EAsblock.c H5EAstat.c \
+	H5EAtest.c H5F.c H5Fint.c H5Faccum.c H5Fcwfs.c H5Fdbg.c \
+	H5Fdeprec.c H5Fefc.c H5Ffake.c H5Fio.c H5Fmount.c H5Fquery.c \
+	H5Fsfile.c H5Fsuper.c H5Fsuper_cache.c H5Ftest.c H5FA.c \
+	H5FAcache.c H5FAdbg.c H5FAdblock.c H5FAdblkpage.c H5FAhdr.c \
+	H5FAstat.c H5FAtest.c H5FD.c H5FDcore.c H5FDfamily.c H5FDint.c \
+	H5FDlog.c H5FDmulti.c H5FDsec2.c H5FDspace.c H5FDstdio.c \
+	H5FL.c H5FO.c H5FS.c H5FScache.c H5FSdbg.c H5FSsection.c \
+	H5FSstat.c H5FStest.c H5G.c H5Gbtree2.c H5Gcache.c \
+	H5Gcompact.c H5Gdense.c H5Gdeprec.c H5Gent.c H5Gint.c \
+	H5Glink.c H5Gloc.c H5Gname.c H5Gnode.c H5Gobj.c H5Goh.c \
+	H5Groot.c H5Gstab.c H5Gtest.c H5Gtraverse.c H5HF.c \
+	H5HFbtree2.c H5HFcache.c H5HFdbg.c H5HFdblock.c H5HFdtable.c \
+	H5HFhdr.c H5HFhuge.c H5HFiblock.c H5HFiter.c H5HFman.c \
+	H5HFsection.c H5HFspace.c H5HFstat.c H5HFtest.c H5HFtiny.c \
+	H5HG.c H5HGcache.c H5HGdbg.c H5HGquery.c H5HL.c H5HLcache.c \
+	H5HLdbg.c H5HLint.c H5HP.c H5I.c H5Itest.c H5L.c H5Lexternal.c \
+	H5lib_settings.c H5MF.c H5MFaggr.c H5MFdbg.c H5MFsection.c \
+	H5MM.c H5MP.c H5MPtest.c H5O.c H5Oainfo.c H5Oalloc.c H5Oattr.c \
+	H5Oattribute.c H5Obogus.c H5Obtreek.c H5Ocache.c H5Ochunk.c \
+	H5Ocont.c H5Ocopy.c H5Odbg.c H5Odrvinfo.c H5Odtype.c H5Oefl.c \
+	H5Ofill.c H5Ofsinfo.c H5Oginfo.c H5Olayout.c H5Olinfo.c \
+	H5Olink.c H5Omessage.c H5Omtime.c H5Oname.c H5Onull.c \
+	H5Opline.c H5Orefcount.c H5Osdspace.c H5Oshared.c H5Ostab.c \
+	H5Oshmesg.c H5Otest.c H5Ounknown.c H5P.c H5Pacpl.c H5Pdapl.c \
+	H5Pdcpl.c H5Pdeprec.c H5Pdxpl.c H5Pencdec.c H5Pfapl.c \
+	H5Pfcpl.c H5Pfmpl.c H5Pgcpl.c H5Pint.c H5Plapl.c H5Plcpl.c \
+	H5Pocpl.c H5Pocpypl.c H5Pstrcpl.c H5Ptest.c H5PL.c H5R.c \
+	H5Rdeprec.c H5UC.c H5RS.c H5S.c H5Sall.c H5Sdbg.c H5Shyper.c \
+	H5Snone.c H5Spoint.c H5Sselect.c H5Stest.c H5SL.c H5SM.c \
+	H5SMbtree2.c H5SMcache.c H5SMmessage.c H5SMtest.c H5ST.c H5T.c \
+	H5Tarray.c H5Tbit.c H5Tcommit.c H5Tcompound.c H5Tconv.c \
+	H5Tcset.c H5Tdbg.c H5Tdeprec.c H5Tenum.c H5Tfields.c \
+	H5Tfixed.c H5Tfloat.c H5Tinit.c H5Tnative.c H5Toffset.c \
+	H5Toh.c H5Topaque.c H5Torder.c H5Tpad.c H5Tprecis.c \
+	H5Tstrpad.c H5Tvisit.c H5Tvlen.c H5TS.c H5VM.c H5WB.c H5Z.c \
+	H5Zdeflate.c H5Zfletcher32.c H5Znbit.c H5Zshuffle.c \
+	H5Zscaleoffset.c H5Zszip.c H5Ztrans.c H5ACmpio.c H5Cmpio.c \
+	H5Dmpio.c H5Fmpi.c H5FDmpi.c H5FDmpio.c H5Smpio.c H5FDdirect.c
+@BUILD_PARALLEL_CONDITIONAL_TRUE@am__objects_1 = H5ACmpio.lo \
+@BUILD_PARALLEL_CONDITIONAL_TRUE@	H5Cmpio.lo H5Dmpio.lo \
+@BUILD_PARALLEL_CONDITIONAL_TRUE@	H5Fmpi.lo H5FDmpi.lo \
+@BUILD_PARALLEL_CONDITIONAL_TRUE@	H5FDmpio.lo H5Smpio.lo
+@DIRECT_VFD_CONDITIONAL_TRUE@am__objects_2 = H5FDdirect.lo
 am_libhdf5_la_OBJECTS = H5.lo H5checksum.lo H5dbg.lo H5system.lo \
 	H5timer.lo H5trace.lo H5A.lo H5Abtree2.lo H5Adense.lo \
-	H5Adeprec.lo H5Aint.lo H5Atest.lo H5AC.lo H5ACmpio.lo H5B.lo \
-	H5Bcache.lo H5Bdbg.lo H5B2.lo H5B2cache.lo H5B2dbg.lo \
-	H5B2hdr.lo H5B2int.lo H5B2stat.lo H5B2test.lo H5C.lo \
-	H5Cmpio.lo H5CS.lo H5D.lo H5Dbtree.lo H5Dchunk.lo \
-	H5Dcompact.lo H5Dcontig.lo H5Ddbg.lo H5Ddeprec.lo H5Defl.lo \
-	H5Dfill.lo H5Dint.lo H5Dio.lo H5Dlayout.lo H5Dmpio.lo H5Doh.lo \
-	H5Dscatgath.lo H5Dselect.lo H5Dtest.lo H5Dvirtual.lo H5E.lo \
-	H5Edeprec.lo H5Eint.lo H5EA.lo H5EAcache.lo H5EAdbg.lo \
-	H5EAdblkpage.lo H5EAdblock.lo H5EAhdr.lo H5EAiblock.lo \
-	H5EAint.lo H5EAsblock.lo H5EAstat.lo H5EAtest.lo H5F.lo \
-	H5Fint.lo H5Faccum.lo H5Fcwfs.lo H5Fdbg.lo H5Fdeprec.lo \
-	H5Fefc.lo H5Ffake.lo H5Fio.lo H5Fmount.lo H5Fmpi.lo \
+	H5Adeprec.lo H5Aint.lo H5Atest.lo H5AC.lo H5B.lo H5Bcache.lo \
+	H5Bdbg.lo H5B2.lo H5B2cache.lo H5B2dbg.lo H5B2hdr.lo \
+	H5B2int.lo H5B2stat.lo H5B2test.lo H5C.lo H5CS.lo H5D.lo \
+	H5Dbtree.lo H5Dchunk.lo H5Dcompact.lo H5Dcontig.lo H5Ddbg.lo \
+	H5Ddeprec.lo H5Defl.lo H5Dfill.lo H5Dint.lo H5Dio.lo \
+	H5Dlayout.lo H5Doh.lo H5Dscatgath.lo H5Dselect.lo H5Dtest.lo \
+	H5Dvirtual.lo H5E.lo H5Edeprec.lo H5Eint.lo H5EA.lo \
+	H5EAcache.lo H5EAdbg.lo H5EAdblkpage.lo H5EAdblock.lo \
+	H5EAhdr.lo H5EAiblock.lo H5EAint.lo H5EAsblock.lo H5EAstat.lo \
+	H5EAtest.lo H5F.lo H5Fint.lo H5Faccum.lo H5Fcwfs.lo H5Fdbg.lo \
+	H5Fdeprec.lo H5Fefc.lo H5Ffake.lo H5Fio.lo H5Fmount.lo \
 	H5Fquery.lo H5Fsfile.lo H5Fsuper.lo H5Fsuper_cache.lo \
 	H5Ftest.lo H5FA.lo H5FAcache.lo H5FAdbg.lo H5FAdblock.lo \
 	H5FAdblkpage.lo H5FAhdr.lo H5FAstat.lo H5FAtest.lo H5FD.lo \
-	H5FDcore.lo H5FDdirect.lo H5FDfamily.lo H5FDint.lo H5FDlog.lo \
-	H5FDmpi.lo H5FDmpio.lo H5FDmulti.lo H5FDsec2.lo H5FDspace.lo \
-	H5FDstdio.lo H5FL.lo H5FO.lo H5FS.lo H5FScache.lo H5FSdbg.lo \
-	H5FSsection.lo H5FSstat.lo H5FStest.lo H5G.lo H5Gbtree2.lo \
-	H5Gcache.lo H5Gcompact.lo H5Gdense.lo H5Gdeprec.lo H5Gent.lo \
-	H5Gint.lo H5Glink.lo H5Gloc.lo H5Gname.lo H5Gnode.lo H5Gobj.lo \
-	H5Goh.lo H5Groot.lo H5Gstab.lo H5Gtest.lo H5Gtraverse.lo \
-	H5HF.lo H5HFbtree2.lo H5HFcache.lo H5HFdbg.lo H5HFdblock.lo \
-	H5HFdtable.lo H5HFhdr.lo H5HFhuge.lo H5HFiblock.lo H5HFiter.lo \
-	H5HFman.lo H5HFsection.lo H5HFspace.lo H5HFstat.lo H5HFtest.lo \
-	H5HFtiny.lo H5HG.lo H5HGcache.lo H5HGdbg.lo H5HGquery.lo \
-	H5HL.lo H5HLcache.lo H5HLdbg.lo H5HLint.lo H5HP.lo H5I.lo \
-	H5Itest.lo H5L.lo H5Lexternal.lo H5lib_settings.lo H5MF.lo \
-	H5MFaggr.lo H5MFdbg.lo H5MFsection.lo H5MM.lo H5MP.lo \
-	H5MPtest.lo H5O.lo H5Oainfo.lo H5Oalloc.lo H5Oattr.lo \
-	H5Oattribute.lo H5Obogus.lo H5Obtreek.lo H5Ocache.lo \
-	H5Ochunk.lo H5Ocont.lo H5Ocopy.lo H5Odbg.lo H5Odrvinfo.lo \
-	H5Odtype.lo H5Oefl.lo H5Ofill.lo H5Ofsinfo.lo H5Oginfo.lo \
-	H5Olayout.lo H5Olinfo.lo H5Olink.lo H5Omessage.lo H5Omtime.lo \
-	H5Oname.lo H5Onull.lo H5Opline.lo H5Orefcount.lo H5Osdspace.lo \
-	H5Oshared.lo H5Ostab.lo H5Oshmesg.lo H5Otest.lo H5Ounknown.lo \
-	H5P.lo H5Pacpl.lo H5Pdapl.lo H5Pdcpl.lo H5Pdeprec.lo \
-	H5Pdxpl.lo H5Pencdec.lo H5Pfapl.lo H5Pfcpl.lo H5Pfmpl.lo \
-	H5Pgcpl.lo H5Pint.lo H5Plapl.lo H5Plcpl.lo H5Pocpl.lo \
-	H5Pocpypl.lo H5Pstrcpl.lo H5Ptest.lo H5PL.lo H5R.lo \
-	H5Rdeprec.lo H5UC.lo H5RS.lo H5S.lo H5Sall.lo H5Sdbg.lo \
-	H5Shyper.lo H5Smpio.lo H5Snone.lo H5Spoint.lo H5Sselect.lo \
-	H5Stest.lo H5SL.lo H5SM.lo H5SMbtree2.lo H5SMcache.lo \
-	H5SMmessage.lo H5SMtest.lo H5ST.lo H5T.lo H5Tarray.lo \
-	H5Tbit.lo H5Tcommit.lo H5Tcompound.lo H5Tconv.lo H5Tcset.lo \
-	H5Tdbg.lo H5Tdeprec.lo H5Tenum.lo H5Tfields.lo H5Tfixed.lo \
-	H5Tfloat.lo H5Tinit.lo H5Tnative.lo H5Toffset.lo H5Toh.lo \
-	H5Topaque.lo H5Torder.lo H5Tpad.lo H5Tprecis.lo H5Tstrpad.lo \
-	H5Tvisit.lo H5Tvlen.lo H5TS.lo H5VM.lo H5WB.lo H5Z.lo \
-	H5Zdeflate.lo H5Zfletcher32.lo H5Znbit.lo H5Zshuffle.lo \
-	H5Zszip.lo H5Zscaleoffset.lo H5Ztrans.lo
+	H5FDcore.lo H5FDfamily.lo H5FDint.lo H5FDlog.lo H5FDmulti.lo \
+	H5FDsec2.lo H5FDspace.lo H5FDstdio.lo H5FL.lo H5FO.lo H5FS.lo \
+	H5FScache.lo H5FSdbg.lo H5FSsection.lo H5FSstat.lo H5FStest.lo \
+	H5G.lo H5Gbtree2.lo H5Gcache.lo H5Gcompact.lo H5Gdense.lo \
+	H5Gdeprec.lo H5Gent.lo H5Gint.lo H5Glink.lo H5Gloc.lo \
+	H5Gname.lo H5Gnode.lo H5Gobj.lo H5Goh.lo H5Groot.lo H5Gstab.lo \
+	H5Gtest.lo H5Gtraverse.lo H5HF.lo H5HFbtree2.lo H5HFcache.lo \
+	H5HFdbg.lo H5HFdblock.lo H5HFdtable.lo H5HFhdr.lo H5HFhuge.lo \
+	H5HFiblock.lo H5HFiter.lo H5HFman.lo H5HFsection.lo \
+	H5HFspace.lo H5HFstat.lo H5HFtest.lo H5HFtiny.lo H5HG.lo \
+	H5HGcache.lo H5HGdbg.lo H5HGquery.lo H5HL.lo H5HLcache.lo \
+	H5HLdbg.lo H5HLint.lo H5HP.lo H5I.lo H5Itest.lo H5L.lo \
+	H5Lexternal.lo H5lib_settings.lo H5MF.lo H5MFaggr.lo \
+	H5MFdbg.lo H5MFsection.lo H5MM.lo H5MP.lo H5MPtest.lo H5O.lo \
+	H5Oainfo.lo H5Oalloc.lo H5Oattr.lo H5Oattribute.lo H5Obogus.lo \
+	H5Obtreek.lo H5Ocache.lo H5Ochunk.lo H5Ocont.lo H5Ocopy.lo \
+	H5Odbg.lo H5Odrvinfo.lo H5Odtype.lo H5Oefl.lo H5Ofill.lo \
+	H5Ofsinfo.lo H5Oginfo.lo H5Olayout.lo H5Olinfo.lo H5Olink.lo \
+	H5Omessage.lo H5Omtime.lo H5Oname.lo H5Onull.lo H5Opline.lo \
+	H5Orefcount.lo H5Osdspace.lo H5Oshared.lo H5Ostab.lo \
+	H5Oshmesg.lo H5Otest.lo H5Ounknown.lo H5P.lo H5Pacpl.lo \
+	H5Pdapl.lo H5Pdcpl.lo H5Pdeprec.lo H5Pdxpl.lo H5Pencdec.lo \
+	H5Pfapl.lo H5Pfcpl.lo H5Pfmpl.lo H5Pgcpl.lo H5Pint.lo \
+	H5Plapl.lo H5Plcpl.lo H5Pocpl.lo H5Pocpypl.lo H5Pstrcpl.lo \
+	H5Ptest.lo H5PL.lo H5R.lo H5Rdeprec.lo H5UC.lo H5RS.lo H5S.lo \
+	H5Sall.lo H5Sdbg.lo H5Shyper.lo H5Snone.lo H5Spoint.lo \
+	H5Sselect.lo H5Stest.lo H5SL.lo H5SM.lo H5SMbtree2.lo \
+	H5SMcache.lo H5SMmessage.lo H5SMtest.lo H5ST.lo H5T.lo \
+	H5Tarray.lo H5Tbit.lo H5Tcommit.lo H5Tcompound.lo H5Tconv.lo \
+	H5Tcset.lo H5Tdbg.lo H5Tdeprec.lo H5Tenum.lo H5Tfields.lo \
+	H5Tfixed.lo H5Tfloat.lo H5Tinit.lo H5Tnative.lo H5Toffset.lo \
+	H5Toh.lo H5Topaque.lo H5Torder.lo H5Tpad.lo H5Tprecis.lo \
+	H5Tstrpad.lo H5Tvisit.lo H5Tvlen.lo H5TS.lo H5VM.lo H5WB.lo \
+	H5Z.lo H5Zdeflate.lo H5Zfletcher32.lo H5Znbit.lo H5Zshuffle.lo \
+	H5Zscaleoffset.lo H5Zszip.lo H5Ztrans.lo $(am__objects_1) \
+	$(am__objects_2)
 libhdf5_la_OBJECTS = $(am_libhdf5_la_OBJECTS)
 AM_V_lt = $(am__v_lt_@AM_V@)
 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
@@ -251,7 +317,8 @@ am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
 am__v_CCLD_0 = @echo "  CCLD    " $@;
 am__v_CCLD_1 = 
 SOURCES = $(libhdf5_la_SOURCES) H5detect.c H5make_libsettings.c
-DIST_SOURCES = $(libhdf5_la_SOURCES) H5detect.c H5make_libsettings.c
+DIST_SOURCES = $(am__libhdf5_la_SOURCES_DIST) H5detect.c \
+	H5make_libsettings.c
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -452,6 +519,11 @@ am__set_b = \
     *) \
       b='$*';; \
   esac
+am__DIST_COMMON = $(srcdir)/H5config.h.in $(srcdir)/Makefile.in \
+	$(srcdir)/libhdf5.settings.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am \
+	$(top_srcdir)/config/lt_vers.am COPYING
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
@@ -468,7 +540,6 @@ AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
 AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -566,6 +637,7 @@ LL_PATH = @LL_PATH@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_STATIC_EXEC = @LT_STATIC_EXEC@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -742,7 +814,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
 # After making changes, run bin/reconfigure to update other configure related
 # files like Makefile.in.
 LT_VERS_INTERFACE = 6
-LT_VERS_REVISION = 221
+LT_VERS_REVISION = 222
 LT_VERS_AGE = 0
 
 # Our main target, the HDF5 library
@@ -757,76 +829,53 @@ MOSTLYCLEANFILES = H5Tinit.c H5lib_settings.c
 DISTCLEANFILES = H5pubconf.h
 
 # library sources
-libhdf5_la_SOURCES = H5.c H5checksum.c H5dbg.c H5system.c H5timer.c H5trace.c \
-        H5A.c H5Abtree2.c H5Adense.c H5Adeprec.c H5Aint.c H5Atest.c \
-        H5AC.c H5ACmpio.c \
-        H5B.c H5Bcache.c H5Bdbg.c \
-        H5B2.c H5B2cache.c H5B2dbg.c H5B2hdr.c H5B2int.c H5B2stat.c H5B2test.c \
-        H5C.c H5Cmpio.c \
-        H5CS.c \
-        H5D.c H5Dbtree.c H5Dchunk.c H5Dcompact.c H5Dcontig.c H5Ddbg.c \
-        H5Ddeprec.c H5Defl.c H5Dfill.c H5Dint.c \
-        H5Dio.c H5Dlayout.c \
-        H5Dmpio.c H5Doh.c H5Dscatgath.c H5Dselect.c H5Dtest.c H5Dvirtual.c \
-        H5E.c H5Edeprec.c H5Eint.c \
-        H5EA.c H5EAcache.c H5EAdbg.c H5EAdblkpage.c H5EAdblock.c H5EAhdr.c \
-        H5EAiblock.c H5EAint.c H5EAsblock.c H5EAstat.c H5EAtest.c \
-        H5F.c H5Fint.c H5Faccum.c H5Fcwfs.c \
-        H5Fdbg.c H5Fdeprec.c H5Fefc.c H5Ffake.c H5Fio.c \
-        H5Fmount.c H5Fmpi.c H5Fquery.c \
-        H5Fsfile.c H5Fsuper.c H5Fsuper_cache.c H5Ftest.c \
-        H5FA.c H5FAcache.c H5FAdbg.c H5FAdblock.c H5FAdblkpage.c H5FAhdr.c \
-        H5FAstat.c H5FAtest.c \
-        H5FD.c H5FDcore.c  \
-        H5FDdirect.c H5FDfamily.c H5FDint.c H5FDlog.c H5FDmpi.c H5FDmpio.c \
-        H5FDmulti.c H5FDsec2.c H5FDspace.c H5FDstdio.c \
-        H5FL.c H5FO.c H5FS.c H5FScache.c H5FSdbg.c H5FSsection.c H5FSstat.c H5FStest.c \
-        H5G.c H5Gbtree2.c H5Gcache.c \
-        H5Gcompact.c H5Gdense.c H5Gdeprec.c H5Gent.c \
-        H5Gint.c H5Glink.c \
-        H5Gloc.c H5Gname.c H5Gnode.c H5Gobj.c H5Goh.c H5Groot.c H5Gstab.c H5Gtest.c \
-        H5Gtraverse.c \
-        H5HF.c H5HFbtree2.c H5HFcache.c H5HFdbg.c H5HFdblock.c H5HFdtable.c \
-        H5HFhdr.c H5HFhuge.c H5HFiblock.c H5HFiter.c H5HFman.c H5HFsection.c \
-        H5HFspace.c H5HFstat.c H5HFtest.c H5HFtiny.c \
-        H5HG.c H5HGcache.c H5HGdbg.c H5HGquery.c \
-        H5HL.c H5HLcache.c H5HLdbg.c H5HLint.c \
-        H5HP.c H5I.c H5Itest.c H5L.c H5Lexternal.c H5lib_settings.c \
-        H5MF.c H5MFaggr.c H5MFdbg.c H5MFsection.c \
-        H5MM.c H5MP.c H5MPtest.c \
-        H5O.c H5Oainfo.c H5Oalloc.c H5Oattr.c \
-        H5Oattribute.c H5Obogus.c H5Obtreek.c H5Ocache.c H5Ochunk.c \
-        H5Ocont.c H5Ocopy.c H5Odbg.c H5Odrvinfo.c H5Odtype.c H5Oefl.c \
-        H5Ofill.c H5Ofsinfo.c H5Oginfo.c \
-        H5Olayout.c \
-        H5Olinfo.c H5Olink.c H5Omessage.c H5Omtime.c \
-        H5Oname.c H5Onull.c H5Opline.c H5Orefcount.c \
-        H5Osdspace.c H5Oshared.c H5Ostab.c \
-        H5Oshmesg.c H5Otest.c H5Ounknown.c \
-        H5P.c H5Pacpl.c H5Pdapl.c H5Pdcpl.c \
-        H5Pdeprec.c H5Pdxpl.c H5Pencdec.c \
-        H5Pfapl.c H5Pfcpl.c H5Pfmpl.c \
-        H5Pgcpl.c H5Pint.c \
-        H5Plapl.c H5Plcpl.c H5Pocpl.c H5Pocpypl.c H5Pstrcpl.c H5Ptest.c \
-        H5PL.c \
-        H5R.c H5Rdeprec.c \
-        H5UC.c \
-        H5RS.c \
-        H5S.c H5Sall.c H5Sdbg.c H5Shyper.c H5Smpio.c H5Snone.c H5Spoint.c \
-        H5Sselect.c H5Stest.c \
-        H5SL.c \
-        H5SM.c H5SMbtree2.c H5SMcache.c H5SMmessage.c H5SMtest.c \
-        H5ST.c \
-        H5T.c H5Tarray.c H5Tbit.c H5Tcommit.c H5Tcompound.c H5Tconv.c \
-        H5Tcset.c H5Tdbg.c H5Tdeprec.c H5Tenum.c H5Tfields.c \
-        H5Tfixed.c \
-        H5Tfloat.c H5Tinit.c H5Tnative.c H5Toffset.c H5Toh.c \
-        H5Topaque.c \
-        H5Torder.c \
-        H5Tpad.c H5Tprecis.c H5Tstrpad.c H5Tvisit.c H5Tvlen.c H5TS.c H5VM.c H5WB.c H5Z.c  \
-        H5Zdeflate.c H5Zfletcher32.c H5Znbit.c H5Zshuffle.c H5Zszip.c  \
-        H5Zscaleoffset.c H5Ztrans.c
-
+libhdf5_la_SOURCES = H5.c H5checksum.c H5dbg.c H5system.c H5timer.c \
+	H5trace.c H5A.c H5Abtree2.c H5Adense.c H5Adeprec.c H5Aint.c \
+	H5Atest.c H5AC.c H5B.c H5Bcache.c H5Bdbg.c H5B2.c H5B2cache.c \
+	H5B2dbg.c H5B2hdr.c H5B2int.c H5B2stat.c H5B2test.c H5C.c \
+	H5CS.c H5D.c H5Dbtree.c H5Dchunk.c H5Dcompact.c H5Dcontig.c \
+	H5Ddbg.c H5Ddeprec.c H5Defl.c H5Dfill.c H5Dint.c H5Dio.c \
+	H5Dlayout.c H5Doh.c H5Dscatgath.c H5Dselect.c H5Dtest.c \
+	H5Dvirtual.c H5E.c H5Edeprec.c H5Eint.c H5EA.c H5EAcache.c \
+	H5EAdbg.c H5EAdblkpage.c H5EAdblock.c H5EAhdr.c H5EAiblock.c \
+	H5EAint.c H5EAsblock.c H5EAstat.c H5EAtest.c H5F.c H5Fint.c \
+	H5Faccum.c H5Fcwfs.c H5Fdbg.c H5Fdeprec.c H5Fefc.c H5Ffake.c \
+	H5Fio.c H5Fmount.c H5Fquery.c H5Fsfile.c H5Fsuper.c \
+	H5Fsuper_cache.c H5Ftest.c H5FA.c H5FAcache.c H5FAdbg.c \
+	H5FAdblock.c H5FAdblkpage.c H5FAhdr.c H5FAstat.c H5FAtest.c \
+	H5FD.c H5FDcore.c H5FDfamily.c H5FDint.c H5FDlog.c H5FDmulti.c \
+	H5FDsec2.c H5FDspace.c H5FDstdio.c H5FL.c H5FO.c H5FS.c \
+	H5FScache.c H5FSdbg.c H5FSsection.c H5FSstat.c H5FStest.c \
+	H5G.c H5Gbtree2.c H5Gcache.c H5Gcompact.c H5Gdense.c \
+	H5Gdeprec.c H5Gent.c H5Gint.c H5Glink.c H5Gloc.c H5Gname.c \
+	H5Gnode.c H5Gobj.c H5Goh.c H5Groot.c H5Gstab.c H5Gtest.c \
+	H5Gtraverse.c H5HF.c H5HFbtree2.c H5HFcache.c H5HFdbg.c \
+	H5HFdblock.c H5HFdtable.c H5HFhdr.c H5HFhuge.c H5HFiblock.c \
+	H5HFiter.c H5HFman.c H5HFsection.c H5HFspace.c H5HFstat.c \
+	H5HFtest.c H5HFtiny.c H5HG.c H5HGcache.c H5HGdbg.c H5HGquery.c \
+	H5HL.c H5HLcache.c H5HLdbg.c H5HLint.c H5HP.c H5I.c H5Itest.c \
+	H5L.c H5Lexternal.c H5lib_settings.c H5MF.c H5MFaggr.c \
+	H5MFdbg.c H5MFsection.c H5MM.c H5MP.c H5MPtest.c H5O.c \
+	H5Oainfo.c H5Oalloc.c H5Oattr.c H5Oattribute.c H5Obogus.c \
+	H5Obtreek.c H5Ocache.c H5Ochunk.c H5Ocont.c H5Ocopy.c H5Odbg.c \
+	H5Odrvinfo.c H5Odtype.c H5Oefl.c H5Ofill.c H5Ofsinfo.c \
+	H5Oginfo.c H5Olayout.c H5Olinfo.c H5Olink.c H5Omessage.c \
+	H5Omtime.c H5Oname.c H5Onull.c H5Opline.c H5Orefcount.c \
+	H5Osdspace.c H5Oshared.c H5Ostab.c H5Oshmesg.c H5Otest.c \
+	H5Ounknown.c H5P.c H5Pacpl.c H5Pdapl.c H5Pdcpl.c H5Pdeprec.c \
+	H5Pdxpl.c H5Pencdec.c H5Pfapl.c H5Pfcpl.c H5Pfmpl.c H5Pgcpl.c \
+	H5Pint.c H5Plapl.c H5Plcpl.c H5Pocpl.c H5Pocpypl.c H5Pstrcpl.c \
+	H5Ptest.c H5PL.c H5R.c H5Rdeprec.c H5UC.c H5RS.c H5S.c \
+	H5Sall.c H5Sdbg.c H5Shyper.c H5Snone.c H5Spoint.c H5Sselect.c \
+	H5Stest.c H5SL.c H5SM.c H5SMbtree2.c H5SMcache.c H5SMmessage.c \
+	H5SMtest.c H5ST.c H5T.c H5Tarray.c H5Tbit.c H5Tcommit.c \
+	H5Tcompound.c H5Tconv.c H5Tcset.c H5Tdbg.c H5Tdeprec.c \
+	H5Tenum.c H5Tfields.c H5Tfixed.c H5Tfloat.c H5Tinit.c \
+	H5Tnative.c H5Toffset.c H5Toh.c H5Topaque.c H5Torder.c \
+	H5Tpad.c H5Tprecis.c H5Tstrpad.c H5Tvisit.c H5Tvlen.c H5TS.c \
+	H5VM.c H5WB.c H5Z.c H5Zdeflate.c H5Zfletcher32.c H5Znbit.c \
+	H5Zshuffle.c H5Zscaleoffset.c H5Zszip.c H5Ztrans.c \
+	$(am__append_1) $(am__append_2)
 
 # Public headers
 include_HEADERS = hdf5.h H5api_adpt.h H5overflow.h H5pubconf.h H5public.h H5version.h \
@@ -883,7 +932,6 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign src/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -892,7 +940,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am:
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am $(am__empty):
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
@@ -1400,7 +1448,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	if test -n "$$am__remaking_logs"; then \
 	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 	       "recursion detected" >&2; \
-	else \
+	elif test -n "$$redo_logs"; then \
 	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 	fi; \
 	if $(am__make_dryrun); then :; else \
@@ -1681,6 +1729,8 @@ uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES \
 	uninstall-includeHEADERS uninstall-libLTLIBRARIES \
 	uninstall-settingsDATA
 
+.PRECIOUS: Makefile
+
 
 # List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
 # This tells the Makefiles that these targets are not files to be built but
diff --git a/test/CMakeLists.txt b/test/CMakeLists.txt
index dc79cdb..f9832f3 100644
--- a/test/CMakeLists.txt
+++ b/test/CMakeLists.txt
@@ -258,7 +258,7 @@ set (H5_TESTS
     #links_env
     file_image
     enc_dec_plist
-    enc_dec_plist_with_endianess
+    enc_dec_plist_cross_platform
     unregister
 )
 
diff --git a/test/CMakeTests.cmake b/test/CMakeTests.cmake
index 662b8c9..b093064 100644
--- a/test/CMakeTests.cmake
+++ b/test/CMakeTests.cmake
@@ -139,47 +139,83 @@ endif (HDF5_TEST_VFD)
 # Copy test files from test/testfiles/plist_files dir to test dir
 # --------------------------------------------------------------------
 set (HDF5_REFERENCE_PLIST_FILES
-    acpl_be
-    acpl_le
-    dapl_be
-    dapl_le
-    dcpl_be
-    dcpl_le
-    dxpl_be
-    dxpl_le
-    fapl_be
-    fapl_le
-    fcpl_be
-    fcpl_le
-    gcpl_be
-    gcpl_le
-    lapl_be
-    lapl_le
-    lcpl_be
-    lcpl_le
-    ocpl_be
-    ocpl_le
-    ocpypl_be
-    ocpypl_le
-    strcpl_be
-    strcpl_le
+    acpl_32be
+    acpl_32le
+    acpl_64be
+    acpl_64le
+    dapl_32be
+    dapl_32le
+    dapl_64be
+    dapl_64le
+    dcpl_32be
+    dcpl_32le
+    dcpl_64be
+    dcpl_64le
+    dxpl_32be
+    dxpl_32le
+    dxpl_64be
+    dxpl_64le
+    fapl_32be
+    fapl_32le
+    fapl_64be
+    fapl_64le
+    fcpl_32be
+    fcpl_32le
+    fcpl_64be
+    fcpl_64le
+    gcpl_32be
+    gcpl_32le
+    gcpl_64be
+    gcpl_64le
+    lapl_32be
+    lapl_32le
+    lapl_64be
+    lapl_64le
+    lcpl_32be
+    lcpl_32le
+    lcpl_64be
+    lcpl_64le
+    ocpl_32be
+    ocpl_32le
+    ocpl_64be
+    ocpl_64le
+    ocpypl_32be
+    ocpypl_32le
+    ocpypl_64be
+    ocpypl_64le
+    strcpl_32be
+    strcpl_32le
+    strcpl_64be
+    strcpl_64le
 )
 
 foreach (plistfile ${HDF5_REFERENCE_PLIST_FILES})
-  set (dest "${PROJECT_BINARY_DIR}/H5TEST/testfiles/plist_files/${plistfile}")
+  set (dest "${PROJECT_BINARY_DIR}/H5TEST/testfiles/plist_files")
   add_custom_command (
       TARGET     ${HDF5_TEST_LIB_TARGET}
       POST_BUILD
       COMMAND    ${CMAKE_COMMAND}
-      ARGS       -E copy_if_different ${HDF5_TEST_SOURCE_DIR}/testfiles/plist_files/${plistfile} ${dest}
+      ARGS       -E copy_if_different ${HDF5_TEST_SOURCE_DIR}/testfiles/plist_files/${plistfile} ${dest}/${plistfile}
+  )
+  add_custom_command (
+      TARGET     ${HDF5_TEST_LIB_TARGET}
+      POST_BUILD
+      COMMAND    ${CMAKE_COMMAND}
+      ARGS       -E copy_if_different ${HDF5_TEST_SOURCE_DIR}/testfiles/plist_files/def_${plistfile} ${dest}/def_${plistfile}
   )
   if (BUILD_SHARED_LIBS)
-    set (dest "${PROJECT_BINARY_DIR}/H5TEST-shared/testfiles/plist_files/${plistfile}")
+    set (dest "${PROJECT_BINARY_DIR}/H5TEST-shared/testfiles/plist_files")
+    add_custom_command (
+        TARGET     ${HDF5_TEST_LIBSH_TARGET}
+        POST_BUILD
+        COMMAND    ${CMAKE_COMMAND}
+        ARGS       -E copy_if_different ${HDF5_TEST_SOURCE_DIR}/testfiles/plist_files/${plistfile} ${dest}/${plistfile}
+    )
     add_custom_command (
         TARGET     ${HDF5_TEST_LIBSH_TARGET}
         POST_BUILD
         COMMAND    ${CMAKE_COMMAND}
-        ARGS       -E copy_if_different ${HDF5_TEST_SOURCE_DIR}/testfiles/plist_files/${plistfile} ${dest}
+        ARGS       -E copy_if_different ${HDF5_TEST_SOURCE_DIR}/testfiles/plist_files/def_${plistfile} ${dest}/def_${plistfile}
     )
   endif (BUILD_SHARED_LIBS)
 endforeach (plistfile ${HDF5_REFERENCE_PLIST_FILES})
diff --git a/test/Makefile.am b/test/Makefile.am
index 7588dc0..d9c53d4 100644
--- a/test/Makefile.am
+++ b/test/Makefile.am
@@ -44,7 +44,7 @@ TEST_PROG= testhdf5 lheap ohdr stab gheap cache cache_api cache_tagging \
            pool accum hyperslab istore bittests dt_arith \
            dtypes dsets cmpd_dset filter_fail extend external efc objcopy links unlink \
            big mtime fillval mount flush1 flush2 app_ref enum \
-           set_extent ttsafe enc_dec_plist enc_dec_plist_with_endianess\
+           set_extent ttsafe enc_dec_plist enc_dec_plist_cross_platform\
            getname vfd ntypes dangle dtransform reserved cross_read \
            freespace mf vds farray earray btree2 fheap file_image unregister
 
diff --git a/test/Makefile.in b/test/Makefile.in
index 715fbf4..0930e3e 100644
--- a/test/Makefile.in
+++ b/test/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -33,7 +33,17 @@
 
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -96,14 +106,6 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/testcheck_version.sh.in $(srcdir)/testerror.sh.in \
-	$(srcdir)/H5srcdir_str.h.in $(srcdir)/testlibinfo.sh.in \
-	$(srcdir)/testlinks_env.sh.in $(srcdir)/test_plugin.sh.in \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \
-	COPYING
 @HAVE_SHARED_CONDITIONAL_TRUE@am__append_1 = test_plugin.sh
 @HAVE_SHARED_CONDITIONAL_TRUE@am__append_2 = plugin$(EXEEXT)
 check_PROGRAMS = $(am__EXEEXT_1) error_test$(EXEEXT) \
@@ -116,10 +118,14 @@ TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
 subdir = test
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/H5config.h \
 	$(top_builddir)/fortran/src/H5config_f.inc
 CONFIG_CLEAN_FILES = testcheck_version.sh testerror.sh H5srcdir_str.h \
@@ -192,7 +198,7 @@ am__EXEEXT_1 = testhdf5$(EXEEXT) lheap$(EXEEXT) ohdr$(EXEEXT) \
 	mount$(EXEEXT) flush1$(EXEEXT) flush2$(EXEEXT) \
 	app_ref$(EXEEXT) enum$(EXEEXT) set_extent$(EXEEXT) \
 	ttsafe$(EXEEXT) enc_dec_plist$(EXEEXT) \
-	enc_dec_plist_with_endianess$(EXEEXT) getname$(EXEEXT) \
+	enc_dec_plist_cross_platform$(EXEEXT) getname$(EXEEXT) \
 	vfd$(EXEEXT) ntypes$(EXEEXT) dangle$(EXEEXT) \
 	dtransform$(EXEEXT) reserved$(EXEEXT) cross_read$(EXEEXT) \
 	freespace$(EXEEXT) mf$(EXEEXT) vds$(EXEEXT) farray$(EXEEXT) \
@@ -281,11 +287,11 @@ enc_dec_plist_SOURCES = enc_dec_plist.c
 enc_dec_plist_OBJECTS = enc_dec_plist.$(OBJEXT)
 enc_dec_plist_LDADD = $(LDADD)
 enc_dec_plist_DEPENDENCIES = libh5test.la $(LIBHDF5)
-enc_dec_plist_with_endianess_SOURCES = enc_dec_plist_with_endianess.c
-enc_dec_plist_with_endianess_OBJECTS =  \
-	enc_dec_plist_with_endianess.$(OBJEXT)
-enc_dec_plist_with_endianess_LDADD = $(LDADD)
-enc_dec_plist_with_endianess_DEPENDENCIES = libh5test.la $(LIBHDF5)
+enc_dec_plist_cross_platform_SOURCES = enc_dec_plist_cross_platform.c
+enc_dec_plist_cross_platform_OBJECTS =  \
+	enc_dec_plist_cross_platform.$(OBJEXT)
+enc_dec_plist_cross_platform_LDADD = $(LDADD)
+enc_dec_plist_cross_platform_DEPENDENCIES = libh5test.la $(LIBHDF5)
 enum_SOURCES = enum.c
 enum_OBJECTS = enum.$(OBJEXT)
 enum_LDADD = $(LDADD)
@@ -567,7 +573,7 @@ SOURCES = $(libdynlib1_la_SOURCES) $(libdynlib2_la_SOURCES) \
 	app_ref.c big.c bittests.c btree2.c cache.c cache_api.c \
 	cache_tagging.c cmpd_dset.c cross_read.c dangle.c dsets.c \
 	dt_arith.c dtransform.c dtypes.c earray.c efc.c \
-	enc_dec_plist.c enc_dec_plist_with_endianess.c enum.c \
+	enc_dec_plist.c enc_dec_plist_cross_platform.c enum.c \
 	err_compat.c error_test.c extend.c external.c farray.c fheap.c \
 	file_image.c fillval.c filter_fail.c flush1.c flush2.c \
 	freespace.c gen_bad_ohdr.c gen_bogus.c gen_cross.c \
@@ -586,7 +592,7 @@ DIST_SOURCES = $(am__libdynlib1_la_SOURCES_DIST) \
 	accum.c app_ref.c big.c bittests.c btree2.c cache.c \
 	cache_api.c cache_tagging.c cmpd_dset.c cross_read.c dangle.c \
 	dsets.c dt_arith.c dtransform.c dtypes.c earray.c efc.c \
-	enc_dec_plist.c enc_dec_plist_with_endianess.c enum.c \
+	enc_dec_plist.c enc_dec_plist_cross_platform.c enum.c \
 	err_compat.c error_test.c extend.c external.c farray.c fheap.c \
 	file_image.c fillval.c filter_fail.c flush1.c flush2.c \
 	freespace.c gen_bad_ohdr.c gen_bogus.c gen_cross.c \
@@ -798,6 +804,12 @@ am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
 TEST_LOGS = $(am__test_logs2:.sh.log=.log)
 SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
 SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/H5srcdir_str.h.in $(srcdir)/Makefile.in \
+	$(srcdir)/test_plugin.sh.in $(srcdir)/testcheck_version.sh.in \
+	$(srcdir)/testerror.sh.in $(srcdir)/testlibinfo.sh.in \
+	$(srcdir)/testlinks_env.sh.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am COPYING
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
@@ -815,7 +827,6 @@ AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
 AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -913,6 +924,7 @@ LL_PATH = @LL_PATH@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_STATIC_EXEC = @LT_STATIC_EXEC@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -1135,7 +1147,7 @@ TEST_PROG = testhdf5 lheap ohdr stab gheap cache cache_api cache_tagging \
            pool accum hyperslab istore bittests dt_arith \
            dtypes dsets cmpd_dset filter_fail extend external efc objcopy links unlink \
            big mtime fillval mount flush1 flush2 app_ref enum \
-           set_extent ttsafe enc_dec_plist enc_dec_plist_with_endianess\
+           set_extent ttsafe enc_dec_plist enc_dec_plist_cross_platform\
            getname vfd ntypes dangle dtransform reserved cross_read \
            freespace mf vds farray earray btree2 fheap file_image unregister
 
@@ -1215,7 +1227,6 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign test/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -1224,7 +1235,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
@@ -1395,9 +1406,9 @@ enc_dec_plist$(EXEEXT): $(enc_dec_plist_OBJECTS) $(enc_dec_plist_DEPENDENCIES) $
 	@rm -f enc_dec_plist$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(enc_dec_plist_OBJECTS) $(enc_dec_plist_LDADD) $(LIBS)
 
-enc_dec_plist_with_endianess$(EXEEXT): $(enc_dec_plist_with_endianess_OBJECTS) $(enc_dec_plist_with_endianess_DEPENDENCIES) $(EXTRA_enc_dec_plist_with_endianess_DEPENDENCIES) 
-	@rm -f enc_dec_plist_with_endianess$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(enc_dec_plist_with_endianess_OBJECTS) $(enc_dec_plist_with_endianess_LDADD) $(LIBS)
+enc_dec_plist_cross_platform$(EXEEXT): $(enc_dec_plist_cross_platform_OBJECTS) $(enc_dec_plist_cross_platform_DEPENDENCIES) $(EXTRA_enc_dec_plist_cross_platform_DEPENDENCIES) 
+	@rm -f enc_dec_plist_cross_platform$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(enc_dec_plist_cross_platform_OBJECTS) $(enc_dec_plist_cross_platform_LDADD) $(LIBS)
 
 enum$(EXEEXT): $(enum_OBJECTS) $(enum_DEPENDENCIES) $(EXTRA_enum_DEPENDENCIES) 
 	@rm -f enum$(EXEEXT)
@@ -1659,7 +1670,7 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earray.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/efc.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enc_dec_plist.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enc_dec_plist_with_endianess.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enc_dec_plist_cross_platform.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enum.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/err_compat.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error_test.Po@am__quote@
@@ -1858,7 +1869,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	if test -n "$$am__remaking_logs"; then \
 	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 	       "recursion detected" >&2; \
-	else \
+	elif test -n "$$redo_logs"; then \
 	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 	fi; \
 	if $(am__make_dryrun); then :; else \
@@ -2203,9 +2214,9 @@ enc_dec_plist.log: enc_dec_plist$(EXEEXT)
 	--log-file $$b.log --trs-file $$b.trs \
 	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
 	"$$tst" $(AM_TESTS_FD_REDIRECT)
-enc_dec_plist_with_endianess.log: enc_dec_plist_with_endianess$(EXEEXT)
-	@p='enc_dec_plist_with_endianess$(EXEEXT)'; \
-	b='enc_dec_plist_with_endianess'; \
+enc_dec_plist_cross_platform.log: enc_dec_plist_cross_platform$(EXEEXT)
+	@p='enc_dec_plist_cross_platform$(EXEEXT)'; \
+	b='enc_dec_plist_cross_platform'; \
 	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
 	--log-file $$b.log --trs-file $$b.trs \
 	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
@@ -2503,6 +2514,8 @@ uninstall-am: uninstall-libLTLIBRARIES
 	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
 	uninstall-libLTLIBRARIES
 
+.PRECIOUS: Makefile
+
 
 # List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
 # This tells the Makefiles that these targets are not files to be built but
diff --git a/test/accum.c b/test/accum.c
index a924517..268b7e1 100644
--- a/test/accum.c
+++ b/test/accum.c
@@ -17,7 +17,7 @@
  */
 #include "h5test.h"
 
-#define H5F_PACKAGE
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 #include "H5Fpkg.h"
 #include "H5FDprivate.h"
 #include "H5Iprivate.h"
diff --git a/test/app_ref.c b/test/app_ref.c
index 3052df7..4b72bcb 100644
--- a/test/app_ref.c
+++ b/test/app_ref.c
@@ -185,6 +185,10 @@ main (void)
 
     PASSED();
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
+    /* Clean up any file(s) created */
     h5_reset();
     fapl = H5Pcreate (H5P_FILE_ACCESS);
     h5_cleanup (FILENAME, fapl);
diff --git a/test/big.c b/test/big.c
index db03c99..e6e2f86 100644
--- a/test/big.c
+++ b/test/big.c
@@ -120,7 +120,7 @@ static hsize_t values_used[WRT_N];
 static hsize_t
 randll(hsize_t limit, int current_index)
 {
-    hsize_t	acc;
+    hsize_t	acc = 0;
     int 	overlap = 1;
     int 	i;
     int 	tries = 0;
@@ -618,8 +618,8 @@ test_sec2(hid_t fapl)
 quit:
     /* End with normal return code */
     /* Clean up the test file */
-    if(h5_cleanup(FILENAME, fapl))
-        HDremove(DNAME);
+    h5_clean_files(FILENAME, fapl);
+    HDremove(DNAME);
     return 0;
 
 error:
@@ -655,8 +655,8 @@ test_stdio(hid_t fapl)
 quit:
     /* End with normal return code */
     /* Clean up the test file */
-    if(h5_cleanup(FILENAME, fapl))
-        HDremove(DNAME);
+    h5_clean_files(FILENAME, fapl);
+    HDremove(DNAME);
     HDfflush(stdout);
     return 0;
 
@@ -716,8 +716,8 @@ test_family(hid_t fapl)
 quit:
     /* End with normal return code */
     /* Clean up the test file */
-    if(h5_cleanup(FILENAME, fapl))
-        HDremove(DNAME);
+    h5_clean_files(FILENAME, fapl);
+    HDremove(DNAME);
     return 0;
 
 error:
diff --git a/test/bittests.c b/test/bittests.c
index c527bb8..c4dfe4c 100644
--- a/test/bittests.c
+++ b/test/bittests.c
@@ -21,7 +21,7 @@
  */
 #include "h5test.h"
 
-#define H5T_PACKAGE
+#define H5T_FRIEND		/*suppress error about including H5Tpkg	  */
 #include "H5Tpkg.h"
 
 #define NTESTS	100000
diff --git a/test/btree2.c b/test/btree2.c
index d8abc84..caad849 100644
--- a/test/btree2.c
+++ b/test/btree2.c
@@ -22,7 +22,7 @@
  * This file needs to access private datatypes from the H5B2 package.
  * This file also needs to access the v2 B-tree testing code.
  */
-#define H5B2_PACKAGE
+#define H5B2_FRIEND		/*suppress error about including H5B2pkg	  */
 #define H5B2_TESTING
 #include "H5B2pkg.h"
 
diff --git a/test/cache_common.h b/test/cache_common.h
index 737c53f..9e8c5ba 100644
--- a/test/cache_common.h
+++ b/test/cache_common.h
@@ -22,8 +22,8 @@
 #ifndef _CACHE_COMMON_H
 #define _CACHE_COMMON_H
 
-#define H5C_PACKAGE             /*suppress error about including H5Cpkg   */
-#define H5F_PACKAGE             /*suppress error about including H5Fpkg   */
+#define H5C_FRIEND		/*suppress error about including H5Cpkg   */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 
 /* Include library header files */
 #include "H5ACprivate.h"
diff --git a/test/cache_tagging.c b/test/cache_tagging.c
index 84c9b34..2d22b5b 100644
--- a/test/cache_tagging.c
+++ b/test/cache_tagging.c
@@ -1113,6 +1113,7 @@ check_dense_attribute_tags(void)
 
     /* Create dataset */
     if ( (did = H5Dcreate2(fid, DATASETNAME, H5T_NATIVE_UCHAR, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
     
     /* get dataset object header */
     if ( get_new_object_header_tag(fid, &d_tag) < 0 ) TEST_ERROR;
@@ -2025,6 +2026,7 @@ check_dataset_creation_tags(hid_t fcpl, int type)
 
     /* Create Dataset */
     if (( did = H5Dcreate2(fid, DATASETNAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
 
     /* =================================== */
     /* Verification of Metadata Tag Values */
@@ -2159,6 +2161,7 @@ check_dataset_creation_earlyalloc_tags(hid_t fcpl, int type)
     if ( (sid = H5Screate_simple(2, dims1, maxdims)) < 0 ) TEST_ERROR;
 
     if (( did = H5Dcreate2(fid, DATASETNAME2, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
 
     /* =================================== */
     /* Verification of Metadata Tag Values */
@@ -2287,6 +2290,7 @@ check_dataset_open_tags(hid_t fcpl, int type)
 
     /* Create Dataset */
     if (( did = H5Dcreate2(fid, DATASETNAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
 
     /* Retrieve tag associated with this dataset */
     if ( get_new_object_header_tag(fid, &d_tag) < 0 ) TEST_ERROR;
@@ -2419,6 +2423,7 @@ check_dataset_write_tags(hid_t fcpl, int type)
 
     /* Create Dataset */
     if (( did = H5Dcreate2(fid, DATASETNAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
 
     /* Retrieve tag associated with this dataset */
     if ( get_new_object_header_tag(fid, &d_tag) < 0 ) TEST_ERROR;
@@ -2709,6 +2714,7 @@ check_dataset_read_tags(hid_t fcpl, int type)
 
     /* Create Dataset */
     if (( did = H5Dcreate2(fid, DATASETNAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
 
     /* Retrieve tag associated with this dataset */
     if ( get_new_object_header_tag(fid, &d_tag) < 0 ) TEST_ERROR;
@@ -2847,6 +2853,7 @@ check_dataset_size_retrieval(hid_t fcpl, int type)
 
     /* Create Dataset */
     if (( did = H5Dcreate2(fid, DATASETNAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
 
     /* Retrieve tag associated with this dataset */
     if ( get_new_object_header_tag(fid, &d_tag) < 0 ) TEST_ERROR;
@@ -2986,6 +2993,7 @@ check_dataset_extend_tags(hid_t fcpl, int type)
 
     /* Create Dataset */
     if (( did = H5Dcreate2(fid, DATASETNAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
 
     /* Retrieve tag associated with this dataset */
     if ( get_new_object_header_tag(fid, &d_tag) < 0 ) TEST_ERROR;
@@ -3367,6 +3375,7 @@ check_link_removal_tags(hid_t fcpl, int type)
 
     /* Create Dataset */
     if (( did = H5Dcreate2(fid, DATASETNAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
 
     /* Retrieve tag associated with this dataset */
     if ( get_new_object_header_tag(fid, &d_tag) < 0 ) TEST_ERROR;
@@ -3526,6 +3535,7 @@ check_link_getname_tags(hid_t fcpl, int type)
 
     /* Create Dataset */
     if (( did = H5Dcreate2(fid, DATASETNAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0 ) TEST_ERROR;
+    if ( H5Pclose(dcpl) < 0 ) TEST_ERROR;
 
     /* Retrieve tag associated with this dataset */
     if ( get_new_object_header_tag(fid, &d_tag) < 0 ) TEST_ERROR;
diff --git a/test/cmpd_dset.c b/test/cmpd_dset.c
index 5c591f8..22bf3a2 100644
--- a/test/cmpd_dset.c
+++ b/test/cmpd_dset.c
@@ -21,7 +21,7 @@
 /* See H5private.h for how to include headers */
 #undef NDEBUG
 
-#define H5T_PACKAGE
+#define H5T_FRIEND		/*suppress error about including H5Tpkg	  */
 #include "H5Tpkg.h"		/*to turn off hardware conversions*/
 #include "H5Iprivate.h"
 
diff --git a/test/dsets.c b/test/dsets.c
index 136fec2..a233b4e 100644
--- a/test/dsets.c
+++ b/test/dsets.c
@@ -26,7 +26,7 @@
 /*
  * This file needs to access private information from the H5Z package.
  */
-#define H5Z_PACKAGE
+#define H5Z_FRIEND
 
 
 #include "h5test.h"
@@ -389,11 +389,11 @@ static herr_t
 test_simple_io(const char *env_h5_drvr, hid_t fapl)
 {
     char                filename[FILENAME_BUF_SIZE];
-    hid_t		file, dataset, space, xfer;
+    hid_t		file = -1, dataset = -1, space = -1, xfer = -1;
     int			i, j, n;
     hsize_t		dims[2];
     void		*tconv_buf = NULL;
-    int                 f;
+    int                 f = -1;
     haddr_t             offset;
     int                 rdata[DSET_DIM1][DSET_DIM2];
 
@@ -425,6 +425,8 @@ test_simple_io(const char *env_h5_drvr, hid_t fapl)
         /* Create the dataset */
         if((dataset = H5Dcreate2(file, DSET_SIMPLE_IO_NAME, H5T_NATIVE_INT, space,
                                  H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error;
+        if(H5Sclose(space) < 0) TEST_ERROR
+        space = -1;
 
         /* Test dataset address.  Should be undefined. */
         if(H5Dget_offset(dataset) != HADDR_UNDEF) goto error;
@@ -455,8 +457,11 @@ test_simple_io(const char *env_h5_drvr, hid_t fapl)
         }
 
         if(H5Pclose (xfer) < 0) goto error;
+            xfer = -1;
         if(H5Dclose(dataset) < 0) goto error;
+            dataset = -1;
         if(H5Fclose(file) < 0) goto error;
+            file = -1;
 
         f = HDopen(filename, O_RDONLY, 0);
         HDlseek(f, (off_t)offset, SEEK_SET);
@@ -475,8 +480,9 @@ test_simple_io(const char *env_h5_drvr, hid_t fapl)
         }
 
         HDclose(f);
+        f = -1;
 
-        HDfree (tconv_buf);
+        HDfree(tconv_buf);
         PASSED();
     } /* end if */
     else {
@@ -487,6 +493,18 @@ test_simple_io(const char *env_h5_drvr, hid_t fapl)
     return 0;
 
 error:
+    if(space > 0)
+        if(H5Sclose(space) < 0) TEST_ERROR
+    if(xfer > 0)
+        if(H5Pclose(xfer) < 0) TEST_ERROR
+    if(dataset > 0)
+        if(H5Dclose(dataset) < 0) TEST_ERROR
+    if(file > 0)
+        if(H5Fclose(file) < 0) TEST_ERROR
+    if(f > 0)
+        HDclose(f);
+    if(tconv_buf)
+        HDfree(tconv_buf);
     return -1;
 }
 
@@ -509,10 +527,10 @@ static herr_t
 test_userblock_offset(const char *env_h5_drvr, hid_t fapl)
 {
     char                filename[FILENAME_BUF_SIZE];
-    hid_t		file, fcpl, dataset, space;
+    hid_t		file = -1, fcpl = -1, dataset = -1, space = -1;
     int			i, j;
     hsize_t		dims[2];
-    int                   f;
+    int                 f = -1;
     haddr_t             offset;
     int                 rdata[DSET_DIM1][DSET_DIM2];
 
@@ -527,6 +545,8 @@ test_userblock_offset(const char *env_h5_drvr, hid_t fapl)
 
         if((file=H5Fcreate(filename, H5F_ACC_TRUNC, fcpl, fapl)) < 0)
             goto error;
+        if(H5Pclose(fcpl) < 0) TEST_ERROR
+        fcpl = -1;
 
         /* Create the data space */
         dims[0] = DSET_DIM1;
@@ -536,6 +556,8 @@ test_userblock_offset(const char *env_h5_drvr, hid_t fapl)
         /* Create the dataset */
         if((dataset = H5Dcreate2(file, DSET_USERBLOCK_IO_NAME, H5T_NATIVE_INT, space,
                                  H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error;
+        if(H5Sclose(space) < 0) TEST_ERROR
+        space = -1;
 
         /* Write the data to the dataset */
         if(H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0)
@@ -547,7 +569,9 @@ test_userblock_offset(const char *env_h5_drvr, hid_t fapl)
         if((offset = H5Dget_offset(dataset)) == HADDR_UNDEF) goto error;
 
         if(H5Dclose(dataset) < 0) goto error;
+        dataset = -1;
         if(H5Fclose(file) < 0) goto error;
+        file = -1;
 
         f = HDopen(filename, O_RDONLY, 0);
         HDlseek(f, (off_t)offset, SEEK_SET);
@@ -566,6 +590,7 @@ test_userblock_offset(const char *env_h5_drvr, hid_t fapl)
         }
 
         HDclose(f);
+        f = -1;
 
         PASSED();
     } /* end if */
@@ -577,6 +602,16 @@ test_userblock_offset(const char *env_h5_drvr, hid_t fapl)
     return 0;
 
 error:
+    if(space > 0)
+        if(H5Sclose(space) < 0) TEST_ERROR
+    if(fcpl > 0)
+        if(H5Pclose(fcpl) < 0) TEST_ERROR
+    if(dataset > 0)
+        if(H5Dclose(dataset) < 0) TEST_ERROR
+    if(file > 0)
+        if(H5Fclose(file) < 0) TEST_ERROR
+    if(f > 0)
+        HDclose(f);
     return -1;
 }
 
@@ -1017,15 +1052,15 @@ test_conv_buffer(hid_t fid)
 
     /* Populate the data members */
     for(j = 0; j < DIM1; j++)
-	for(k = 0; k < DIM2; k++)
-	    for(l = 0; l < DIM3; l++)
-		cf->a[j][k][l] = 10*(j+1) + l + k;
+        for(k = 0; k < DIM2; k++)
+            for(l = 0; l < DIM3; l++)
+                cf->a[j][k][l] = 10*(j+1) + l + k;
 
     for(j = 0; j < DIM2; j++)
-	cf->b[j] = (float)(100.0f*(j+1) + 0.01f*j);
+        cf->b[j] = 100.0f * (float)(j+1) + 0.01f * (float)j;
 
     for(j = 0; j < DIM3; j++)
-	cf->c[j] = 100.0f*(j+1) + 0.02f*j;
+        cf->c[j] = 100.0f * (float)(j+1) + 0.02f * (float)j;
 
 
   /* Create data space */
@@ -1102,7 +1137,7 @@ test_conv_buffer(hid_t fid)
   HDfree(cf);
   HDfree(cfrR);
   puts(" PASSED");
-  return(0);
+  return 0;
 
 error:
   return -1;
@@ -2692,7 +2727,8 @@ test_nbit_int(hid_t file)
     int                 new_data[2][5];
     unsigned int        mask;
     size_t              precision, offset;
-    size_t             i, j;
+    double              power;
+    size_t              i, j;
 
     puts("Testing nbit filter");
     TESTING("    nbit int (setup)");
@@ -2725,8 +2761,8 @@ test_nbit_int(hid_t file)
     /* Initialize data, assuming size of long long >= size of int */
     for(i= 0;i< (size_t)size[0]; i++)
       for(j = 0; j < (size_t)size[1]; j++) {
-        orig_data[i][j] = (int)(((long long)HDrandom() %
-                           (long long)HDpow(2.0f, (double)(precision - 1))) << offset);
+        power = HDpow(2.0f, (double)(precision - 1));
+        orig_data[i][j] = (int)(((long long)HDrandom() % (long long)power) << offset);
 
         /* even-numbered values are negtive */
         if((i*size[1]+j+1)%2 == 0)
@@ -3052,7 +3088,8 @@ test_nbit_array(hid_t file)
     unsigned int        orig_data[2][5][3][2];
     unsigned int        new_data[2][5][3][2];
     size_t              precision, offset;
-    size_t             i, j, m, n;
+    double              power;
+    size_t              i, j, m, n;
 
     TESTING("    nbit array (setup)");
 
@@ -3091,9 +3128,11 @@ test_nbit_array(hid_t file)
     for(i= 0;i< (size_t)size[0]; i++)
       for(j = 0; j < (size_t)size[1]; j++)
         for(m = 0; m < (size_t)adims[0]; m++)
-          for(n = 0; n < (size_t)adims[1]; n++)
+          for(n = 0; n < (size_t)adims[1]; n++) {
+            power = HDpow(2.0F, (double)precision);
             orig_data[i][j][m][n] = (unsigned int)(((long long)HDrandom() %
-                                     (long long)HDpow(2.0F, (double)precision)) << offset);
+                                     (long long)power) << offset);
+          } /* end for */
     PASSED();
 
     /*----------------------------------------------------------------------
@@ -3192,7 +3231,8 @@ test_nbit_compound(hid_t file)
     atomic              orig_data[2][5];
     atomic              new_data[2][5];
     unsigned int        i_mask, s_mask, c_mask;
-    size_t             i, j;
+    double              power;
+    size_t              i, j;
 
 
     TESTING("    nbit compound (setup)");
@@ -3251,12 +3291,12 @@ test_nbit_compound(hid_t file)
     /* Initialize data, assuming size of long long >= size of member datatypes */
     for(i= 0;i< (size_t)size[0]; i++)
       for(j = 0; j < (size_t)size[1]; j++) {
-        orig_data[i][j].i = (int)(((long long)HDrandom() %
-                             (long long)HDpow(2.0F, (double)(precision[0]-1))) << offset[0]);
-        orig_data[i][j].c = (char)(((long long)HDrandom() %
-                             (long long)HDpow(2.0F, (double)(precision[1]-1))) << offset[1]);
-        orig_data[i][j].s = (short)(((long long)HDrandom() %
-                             (long long)HDpow(2.0F, (double)(precision[2]-1))) << offset[2]);
+        power = HDpow(2.0F, (double)(precision[0]-1));
+        orig_data[i][j].i = (int)(((long long)HDrandom() % (long long)power) << offset[0]);
+        power = HDpow(2.0F, (double)(precision[1]-1));
+        orig_data[i][j].c = (char)(((long long)HDrandom() % (long long)power) << offset[1]);
+        power = HDpow(2.0F, (double)(precision[2]-1));
+        orig_data[i][j].s = (short)(((long long)HDrandom() % (long long)power) << offset[2]);
         orig_data[i][j].f = float_val[i][j];
 
         /* some even-numbered integer values are negtive */
@@ -3386,7 +3426,8 @@ test_nbit_compound_2(hid_t file)
     complex             orig_data[2][5];
     complex             new_data[2][5];
     unsigned int        i_mask, s_mask, c_mask, b_mask;
-    size_t             i, j, m, n, b_failed, d_failed;
+    double              power;
+    size_t              i, j, m, n, b_failed, d_failed;
 
 
     TESTING("    nbit compound complex (setup)");
@@ -3477,33 +3518,34 @@ test_nbit_compound_2(hid_t file)
     /* Initialize data, assuming size of long long >= size of member datatypes */
     for(i= 0;i< (size_t)size[0]; i++)
       for(j = 0; j < (size_t)size[1]; j++) {
-        orig_data[i][j].a.i = (int)(((long long)HDrandom() %
-                               (long long)HDpow(2.0F, (double)(precision[0]-1))) << offset[0]);
-        orig_data[i][j].a.c = (char)(((long long)HDrandom() %
-                               (long long)HDpow(2.0F, (double)(precision[1]-1))) << offset[1]);
-        orig_data[i][j].a.s = (short)(-((long long)HDrandom() %
-                               (long long)HDpow(2.0F, (double)(precision[2]-1))) << offset[2]);
+        power = HDpow(2.0F, (double)(precision[0]-1));
+        orig_data[i][j].a.i = (int)(((long long)HDrandom() % (long long)power) << offset[0]);
+        power = HDpow(2.0F, (double)(precision[1]-1));
+        orig_data[i][j].a.c = (char)(((long long)HDrandom() % (long long)power) << offset[1]);
+        power = HDpow(2.0F, (double)(precision[2]-1));
+        orig_data[i][j].a.s = (short)(-((long long)HDrandom() % (long long)power) << offset[2]);
         orig_data[i][j].a.f = float_val[i][j];
 
-        orig_data[i][j].v = (unsigned int)(((long long)HDrandom() %
-                             (long long)HDpow(2.0F, (double)precision[3])) << offset[3]);
+        power = HDpow(2.0F, (double)precision[3]);
+        orig_data[i][j].v = (unsigned int)(((long long)HDrandom() % (long long)power) << offset[3]);
 
         for(m = 0; m < (size_t)array_dims[0]; m++)
-          for(n = 0; n < (size_t)array_dims[1]; n++)
-            orig_data[i][j].b[m][n] = (char)(((long long)HDrandom() %
-                                       (long long)HDpow(2.0F, (double)(precision[4]-1))) << offset[4]);
+          for(n = 0; n < (size_t)array_dims[1]; n++) {
+            power = HDpow(2.0F, (double)(precision[4]-1));
+            orig_data[i][j].b[m][n] = (char)(((long long)HDrandom() % (long long)power) << offset[4]);
+          } /* end for */
 
         for(m = 0; m < (size_t)array_dims[0]; m++)
           for(n = 0; n < (size_t)array_dims[1]; n++) {
-            orig_data[i][j].d[m][n].i = (int)(-((long long)HDrandom() %
-                                         (long long)HDpow(2.0F, (double)(precision[0]-1))) << offset[0]);
-            orig_data[i][j].d[m][n].c = (char)(((long long)HDrandom() %
-                                         (long long)HDpow(2.0F, (double)(precision[1]-1))) << offset[1]);
-            orig_data[i][j].d[m][n].s = (short)(((long long)HDrandom() %
-                                         (long long)HDpow(2.0F, (double)(precision[2]-1))) << offset[2]);
+            power = HDpow(2.0F, (double)(precision[0]-1));
+            orig_data[i][j].d[m][n].i = (int)(-((long long)HDrandom() % (long long)power) << offset[0]);
+            power = HDpow(2.0F, (double)(precision[1]-1));
+            orig_data[i][j].d[m][n].c = (char)(((long long)HDrandom() % (long long)power) << offset[1]);
+            power = HDpow(2.0F, (double)(precision[2]-1));
+            orig_data[i][j].d[m][n].s = (short)(((long long)HDrandom() % (long long)power) << offset[2]);
             orig_data[i][j].d[m][n].f = float_val[i][j];
-          }
-      }
+          } /* end for */
+      } /* end for */
 
     PASSED();
 
@@ -3648,7 +3690,8 @@ test_nbit_compound_3(hid_t file)
     const hsize_t       chunk_size[1] = {5};
     atomic              orig_data[5];
     atomic              new_data[5];
-    size_t             i, k, j;
+    double              power;
+    size_t              i, k, j;
 
 
     TESTING("    nbit compound with no-op type (setup)");
@@ -3695,8 +3738,9 @@ test_nbit_compound_3(hid_t file)
 
     /* Initialize data */
     for(i = 0; i < (size_t)size[0]; i++) {
+        power = HDpow(2.0F, 17.0F - 1.0F);
         HDmemset(&orig_data[i], 0, sizeof(orig_data[i]));
-        orig_data[i].i = HDrandom() % (long)HDpow(2.0F, 17.0F - 1.0F);
+        orig_data[i].i = HDrandom() % (long)power;
         HDstrcpy(orig_data[i].str, "fixed-length C string");
         orig_data[i].vl_str = HDstrdup("variable-length C string");
 
@@ -3815,6 +3859,7 @@ test_nbit_int_size(hid_t file)
     hsize_t dims[2], chunk_size[2];
     hsize_t dset_size = 0;
     int     orig_data[DSET_DIM1][DSET_DIM2];
+    double  power;
     int     i, j;
     size_t  precision, offset;
 
@@ -3865,8 +3910,10 @@ test_nbit_int_size(hid_t file)
    * corresponding to the memory datatype's precision and offset.
    */
    for (i=0; i < DSET_DIM1; i++)
-       for (j=0; j < DSET_DIM2; j++)
-           orig_data[i][j] = rand() % (int)pow((double)2, (double)(precision-1)) << offset;
+       for (j=0; j < DSET_DIM2; j++) {
+           power = HDpow(2.0F, (double)(precision-1));
+           orig_data[i][j] = HDrandom() % (int)power << offset;
+       } /* end for */
 
 
    /* Describe the dataspace. */
diff --git a/test/dt_arith.c b/test/dt_arith.c
index eb201d0..76ad0f3 100644
--- a/test/dt_arith.c
+++ b/test/dt_arith.c
@@ -45,7 +45,7 @@
 
 /* Alignment test stuff */
 #ifdef TEST_ALIGNMENT
-#define H5T_PACKAGE
+#define H5T_FRIEND		/*suppress error about including H5Tpkg	  */
 #include "H5Tpkg.h"
 #endif
 #define SET_ALIGNMENT(TYPE,VAL) \
@@ -645,11 +645,18 @@ test_hard_query(void)
     }
 
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
 
     return 0;
 
- error:
+error:
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
     return 1;
 }
@@ -871,7 +878,11 @@ error:
     if(saved_buf2)
         HDfree(saved_buf2);
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5(); /*print statistics*/
+
     return MAX((int)fails_this_test, 1);
 }
 
@@ -1290,6 +1301,10 @@ test_derived_flt(void)
     } /* end if */
 
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();	/*print statistics*/
 
     return 0;
@@ -1305,7 +1320,12 @@ test_derived_flt(void)
         H5Pclose (dxpl_id);
         H5Fclose (file);
     } H5E_END_TRY;
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5(); /*print statistics*/
+
     return MAX((int)fails_this_test, 1);
 }
 
@@ -1592,6 +1612,10 @@ test_derived_integer(void)
     HDfree(saved_buf);
 
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();	/*print statistics*/
 
     return 0;
@@ -1606,7 +1630,12 @@ test_derived_integer(void)
         H5Pclose (dxpl_id);
         H5Fclose (file);
     } H5E_END_TRY;
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5(); /*print statistics*/
+
     return MAX((int)fails_this_test, 1);
 }
 
@@ -2601,7 +2630,12 @@ done:
     if (saved) aligned_free(saved);
     if (aligned) HDfree(aligned);
     HDfflush(stdout);
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();	/*print statistics*/
+
     return (int)fails_all_tests;
 
 error:
@@ -2609,7 +2643,12 @@ error:
     if (saved) aligned_free(saved);
     if (aligned) HDfree(aligned);
     HDfflush(stdout);
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();	/*print statistics*/
+
     return MAX((int)fails_all_tests, 1);
 }
 
@@ -2820,7 +2859,7 @@ test_conv_flt_1 (const char *name, int run_test, hid_t src, hid_t dst)
 #endif
     unsigned char	*hw=NULL;		/*ptr to hardware-conv'd*/
     int			underflow;		/*underflow occurred	*/
-    int			overflow;		/*overflow occurred	*/
+    int			overflow = 0;	/*overflow occurred	*/
     int 		uflow=0;		/*underflow debug counters*/
     size_t		j, k;			/*counters		*/
     int			sendian;		/* source type endianess */
@@ -3307,6 +3346,9 @@ done:
     HDassert(0 && "Should not reach this point!");
     return 1;
 #else
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
 
     /* If the source is normalized values, treat the failures as error;
@@ -3330,7 +3372,11 @@ error:
     HDassert(0 && "Should not reach this point!");
     return 1;
 #else
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     if(run_test==TEST_NOOP || run_test==TEST_NORMAL)
         return MAX((int)fails_all_tests, 1);
     else if(run_test==TEST_DENORM || run_test==TEST_SPECIAL)
@@ -4504,6 +4550,9 @@ test_conv_int_fp(const char *name, int run_test, hid_t src, hid_t dst)
     if (saved) aligned_free(saved);
     if (aligned) HDfree(aligned);
     HDfflush(stdout);
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();	/*print statistics*/
 
     /* If the source is normalized floating values, treat the failures as error;
@@ -4518,6 +4567,10 @@ test_conv_int_fp(const char *name, int run_test, hid_t src, hid_t dst)
     if (saved) aligned_free(saved);
     if (aligned) HDfree(aligned);
     HDfflush(stdout);
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();	/*print statistics*/
 
     if(run_test==TEST_NORMAL)
@@ -5164,6 +5217,10 @@ main(void)
      *----------------------------------------------------------------------
      */
     without_hardware_g = TRUE;
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
 
     /* Test software floating-point conversion functions */
@@ -5179,8 +5236,14 @@ main(void)
     /* Test software integer-float conversion functions */
     nerrors += run_int_fp_conv("soft");
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     if (nerrors) {
         printf("***** %lu FAILURE%s! *****\n",
                nerrors, 1==nerrors?"":"S");
@@ -5189,3 +5252,4 @@ main(void)
     printf("All data type tests passed.\n");
     return 0;
 }
+
diff --git a/test/dtransform.c b/test/dtransform.c
index 4adbaf5..2769771 100644
--- a/test/dtransform.c
+++ b/test/dtransform.c
@@ -467,7 +467,7 @@ test_poly(const hid_t dxpl_id_polynomial)
     for(row = 0; row < ROWS; row++)
         for(col = 0; col < COLS; col++) {
             windchillC = (int) ((5.0f / 9.0f) * (windchillFfloat[row][col] - 32));
-            polyflres[row][col] = (float) ((2.0f + windchillC) * ((windchillC - 8.0f) / 2.0f));
+            polyflres[row][col] = ((2.0f + (float)windchillC) * (((float)windchillC - 8.0f) / 2.0f));
         }
 
     TESTING("data transform, polynomial transform (int->float)")
diff --git a/test/dtypes.c b/test/dtypes.c
index 88bbce0..6fe455d 100644
--- a/test/dtypes.c
+++ b/test/dtypes.c
@@ -47,7 +47,7 @@
 
 /* Alignment test stuff */
 #ifdef TEST_ALIGNMENT
-#define H5T_PACKAGE
+#define H5T_FRIEND		/*suppress error about including H5Tpkg	  */
 #include "H5Tpkg.h"
 #endif
 #define SET_ALIGNMENT(TYPE,VAL) \
@@ -769,11 +769,20 @@ test_compound_2(void)
     CHECK_NMEMBS(nmembs , st, dt)
 
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return 0;
 
- error:
+error:
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return 1;
 }
 
@@ -888,11 +897,19 @@ test_compound_3(void)
     CHECK_NMEMBS(nmembs, st, dt)
 
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
     return 0;
 
- error:
+error:
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return 1;
 }
 
@@ -1015,11 +1032,19 @@ test_compound_4(void)
     CHECK_NMEMBS(nmembs, st, dt)
 
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
     return 0;
 
- error:
+error:
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return 1;
 }
 
@@ -1226,11 +1251,19 @@ test_compound_6(void)
     CHECK_NMEMBS(nmembs, st, dt)
 
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
     return 0;
 
- error:
+error:
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return 1;
 }
 
@@ -1365,11 +1398,19 @@ test_compound_7(void)
     } /* end if */
 
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
     return 0;
 
- error:
+error:
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return 1;
 }
 
@@ -4229,6 +4270,10 @@ test_conv_str_1(void)
     HDfree(buf);
 
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
     return 0;
 
@@ -4241,7 +4286,11 @@ error:
     if(buf)
         HDfree(buf);
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return 1;
 }
 
@@ -4304,7 +4353,11 @@ error:
     if(buf)
         HDfree(buf);
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return ret_value;
 }
 
@@ -4418,7 +4471,11 @@ error:
     if(tag)
         H5free_memory(tag); /* Technically allocated by API call */
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return ret_value;  /* Number of errors */
 }
 
@@ -4490,7 +4547,11 @@ error:
     if(buf)
         HDfree(buf);
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return ret_value;
 }
 
@@ -4657,13 +4718,22 @@ test_conv_bitfield(void)
     H5Tclose(st);
     H5Tclose(dt);
     PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
     return 0;
 
- error:
+error:
     H5Tclose(st);
     H5Tclose(dt);
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return 1;
 }
 
@@ -4781,14 +4851,18 @@ test_bitfield_funcs(void)
 
     retval = 0;
 
- error:
-
+error:
     if (retval == -1) retval = 1;
     H5free_memory(tag);
     H5Tclose(ntype);
     H5Tclose(type);
     if (retval == 0) PASSED();
+
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     reset_hdf5();
+
     return retval;
 }
 
@@ -7293,6 +7367,7 @@ main(void)
 #ifndef H5_NO_DEPRECATED_SYMBOLS
     nerrors += test_deprec(fapl);
 #endif /* H5_NO_DEPRECATED_SYMBOLS */
+
     h5_cleanup(FILENAME, fapl); /*must happen before first reset*/
     reset_hdf5();
 
diff --git a/test/earray.c b/test/earray.c
index b510992..368ee42 100644
--- a/test/earray.c
+++ b/test/earray.c
@@ -22,7 +22,7 @@
  * This file needs to access private datatypes from the H5EA package.
  * This file also needs to access the extensible array testing code.
  */
-#define H5EA_PACKAGE
+#define H5EA_FRIEND		/*suppress error about including H5EApkg	  */
 #define H5EA_TESTING
 #include "H5EApkg.h"		/* Extensible Arrays			*/
 
diff --git a/test/efc.c b/test/efc.c
index ff4f738..a8d77e0 100644
--- a/test/efc.c
+++ b/test/efc.c
@@ -18,7 +18,7 @@
 
 #include "h5test.h"
 
-#define H5F_PACKAGE
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 #include "H5Fpkg.h"
 #include "H5Iprivate.h"
 
@@ -3200,7 +3200,7 @@ main(void)
 
     puts("All external file cache tests passed.");
 
-    h5_cleanup(FILENAME, fapl_id);
+    h5_clean_files(FILENAME, fapl_id);
 
     return 0;
 
diff --git a/test/enc_dec_plist.c b/test/enc_dec_plist.c
index 4832767..4f0147e 100644
--- a/test/enc_dec_plist.c
+++ b/test/enc_dec_plist.c
@@ -122,10 +122,18 @@ main(void)
 	printf("Encode/Decode DCPLs\n");
 
     /******* ENCODE/DECODE DCPLS *****/
-    TESTING("DCPL Encoding/Decoding");
+    TESTING("Default DCPL Encoding/Decoding");
     if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(dcpl) < 0)
+        FAIL_PUTS_ERROR("Default DCPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("DCPL Encoding/Decoding");
+
     if((H5Pset_chunk(dcpl, 2, chunk_size)) < 0)
         FAIL_STACK_ERROR
 
@@ -161,10 +169,18 @@ main(void)
 
 
     /******* ENCODE/DECODE DAPLS *****/
-    TESTING("DAPL Encoding/Decoding");
+    TESTING("Default DAPL Encoding/Decoding");
     if((dapl = H5Pcreate(H5P_DATASET_ACCESS)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(dapl) < 0)
+        FAIL_PUTS_ERROR("Default DAPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("DAPL Encoding/Decoding");
+
     if((H5Pset_chunk_cache(dapl, nslots, nbytes, w0)) < 0)
         FAIL_STACK_ERROR
 
@@ -180,10 +196,18 @@ main(void)
 
 
     /******* ENCODE/DECODE OCPLS *****/
-    TESTING("OCPL Encoding/Decoding");
+    TESTING("Default OCPL Encoding/Decoding");
     if((ocpl = H5Pcreate(H5P_OBJECT_CREATE)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(ocpl) < 0)
+        FAIL_PUTS_ERROR("Default OCPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("OCPL Encoding/Decoding");
+
     if((H5Pset_attr_creation_order(ocpl, (H5P_CRT_ORDER_TRACKED | H5P_CRT_ORDER_INDEXED))) < 0)
          FAIL_STACK_ERROR
 
@@ -205,9 +229,18 @@ main(void)
 
 
     /******* ENCODE/DECODE DXPLS *****/
-    TESTING("DXPL Encoding/Decoding");
+    TESTING("Default DXPL Encoding/Decoding");
     if((dxpl = H5Pcreate(H5P_DATASET_XFER)) < 0)
         FAIL_STACK_ERROR
+
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(dxpl) < 0)
+        FAIL_PUTS_ERROR("Default DXPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("DXPL Encoding/Decoding");
+
     if((H5Pset_btree_ratios(dxpl, 0.2f, 0.6f, 0.2f)) < 0)
         FAIL_STACK_ERROR
     if((H5Pset_hyper_vector_size(dxpl, 5)) < 0)
@@ -241,10 +274,18 @@ main(void)
 
 
     /******* ENCODE/DECODE GCPLS *****/
-    TESTING("GCPL Encoding/Decoding");
+    TESTING("Default GCPL Encoding/Decoding");
     if((gcpl = H5Pcreate(H5P_GROUP_CREATE)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(gcpl) < 0)
+        FAIL_PUTS_ERROR("Default GCPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("GCPL Encoding/Decoding");
+
     if((H5Pset_local_heap_size_hint(gcpl, 256)) < 0)
          FAIL_STACK_ERROR
 
@@ -273,10 +314,18 @@ main(void)
 
 
     /******* ENCODE/DECODE LCPLS *****/
-    TESTING("LCPL Encoding/Decoding");
+    TESTING("Default LCPL Encoding/Decoding");
     if((lcpl = H5Pcreate(H5P_LINK_CREATE)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(lcpl) < 0)
+        FAIL_PUTS_ERROR("Default LCPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("LCPL Encoding/Decoding");
+
     if((H5Pset_create_intermediate_group(lcpl, TRUE)) < 0)
         FAIL_STACK_ERROR
 
@@ -292,10 +341,18 @@ main(void)
 
 
     /******* ENCODE/DECODE LAPLS *****/
-    TESTING("LAPL Encoding/Decoding");
+    TESTING("Default LAPL Encoding/Decoding");
     if((lapl = H5Pcreate(H5P_LINK_ACCESS)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(lapl) < 0)
+        FAIL_PUTS_ERROR("Default LAPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("LAPL Encoding/Decoding");
+
     if((H5Pset_nlinks(lapl, (size_t)134)) < 0)
         FAIL_STACK_ERROR
 
@@ -330,10 +387,18 @@ main(void)
 
 
     /******* ENCODE/DECODE OCPYPLS *****/
-    TESTING("OCPYPL Encoding/Decoding");
+    TESTING("Default OCPYPL Encoding/Decoding");
     if((ocpypl = H5Pcreate(H5P_OBJECT_COPY)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(ocpypl) < 0)
+        FAIL_PUTS_ERROR("Default OCPYPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("OCPYPL Encoding/Decoding");
+
     if((H5Pset_copy_object(ocpypl, H5O_COPY_EXPAND_EXT_LINK_FLAG)) < 0)
         FAIL_STACK_ERROR
 
@@ -354,10 +419,18 @@ main(void)
 
 
     /******* ENCODE/DECODE FAPLS *****/
-    TESTING("FAPL Encoding/Decoding");
+    TESTING("Default FAPL Encoding/Decoding");
     if((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(fapl) < 0)
+        FAIL_PUTS_ERROR("Default FAPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("FAPL Encoding/Decoding");
+
     if((H5Pset_family_offset(fapl, 1024)) < 0)
         FAIL_STACK_ERROR
     if((H5Pset_meta_block_size(fapl, 2098452)) < 0)
@@ -397,11 +470,19 @@ main(void)
 
 
     /******* ENCODE/DECODE FCPLS *****/
-    TESTING("FCPL Encoding/Decoding");
+    TESTING("Default FCPL Encoding/Decoding");
 
     if((fcpl = H5Pcreate(H5P_FILE_CREATE)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(fcpl) < 0)
+        FAIL_PUTS_ERROR("Default FCPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("FCPL Encoding/Decoding");
+
     if((H5Pset_userblock(fcpl, 1024) < 0))
          FAIL_STACK_ERROR
 
@@ -435,11 +516,19 @@ main(void)
 
 
     /******* ENCODE/DECODE STRCPLS *****/
-    TESTING("STRCPL Encoding/Decoding");
+    TESTING("Default STRCPL Encoding/Decoding");
 
     if((strcpl = H5Pcreate(H5P_STRING_CREATE)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(strcpl) < 0)
+        FAIL_PUTS_ERROR("Default STRCPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("STRCPL Encoding/Decoding");
+
     if((H5Pset_char_encoding(strcpl, H5T_CSET_UTF8) < 0))
          FAIL_STACK_ERROR
 
@@ -455,11 +544,19 @@ main(void)
 
 
     /******* ENCODE/DECODE ACPLS *****/
-    TESTING("ACPL Encoding/Decoding");
+    TESTING("Default ACPL Encoding/Decoding");
 
     if((acpl = H5Pcreate(H5P_ATTRIBUTE_CREATE)) < 0)
         FAIL_STACK_ERROR
 
+    /* Test encoding & decoding default property list */
+    if(test_encode_decode(acpl) < 0)
+        FAIL_PUTS_ERROR("Default ACPL encoding/decoding failed\n")
+
+    PASSED();
+
+    TESTING("ACPL Encoding/Decoding");
+
     if((H5Pset_char_encoding(acpl, H5T_CSET_UTF8) < 0))
          FAIL_STACK_ERROR
 
diff --git a/test/enc_dec_plist_cross_platform.c b/test/enc_dec_plist_cross_platform.c
new file mode 100644
index 0000000..a5d5552
--- /dev/null
+++ b/test/enc_dec_plist_cross_platform.c
@@ -0,0 +1,235 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * Copyright by the Board of Trustees of the University of Illinois.         *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Serial tests for encoding/decoding plists
+ */
+
+#include "h5test.h"
+#include "H5srcdir.h"
+
+#define CONFIG_LE   0x01
+#define CONFIG_64   0x02
+#define NCONFIG     0x04
+
+static int test_plists(const char *filename_prefix);
+
+int
+main(void)
+{
+    if(VERBOSE_MED)
+	printf("Encode/Decode property list endianess\n");
+
+    /******* ENCODE/DECODE DCPLS *****/
+    TESTING("Default DCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_dcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("DCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/dcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE DAPLS *****/
+    TESTING("Default DAPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_dapl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("DAPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/dapl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE DXPLS *****/
+    TESTING("Default DXPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_dxpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("DXPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/dxpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE GCPLS *****/
+    TESTING("Default GCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_gcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("GCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/gcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE LCPLS *****/
+    TESTING("Default LCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_lcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("LCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/lcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE LAPLS *****/
+    TESTING("Default LAPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_lapl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("LAPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/lapl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE OCPLS *****/
+    TESTING("Default OCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_ocpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("OCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/ocpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE OCPYPLS *****/
+    TESTING("Default OCPYPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_ocpypl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("OCPYPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/ocpypl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE FCPLS *****/
+    TESTING("Default FCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_fcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("FCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/fcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE FAPLS *****/
+    TESTING("Default FAPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_fapl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("FAPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/fapl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE STRCPLS *****/
+    TESTING("Default STRCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_strcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("STRCPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/strcpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    /******* ENCODE/DECODE ACPLS *****/
+    TESTING("Default ACPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/def_acpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+    TESTING("ACPL Encoding/Decoding");
+    if(test_plists("testfiles/plist_files/acpl_") < 0)
+        FAIL_STACK_ERROR
+    PASSED();
+
+    return 0;
+
+error:
+    return 1;
+}
+
+static int
+test_plists(const char *filename_prefix) 
+{
+    unsigned config_1, config_2;
+    int fd_1, fd_2;
+    size_t size_1 = 0, size_2 = 0;
+    void *buf_1 = NULL, *buf_2 = NULL;
+    hid_t plist_1, plist_2;
+    char filename[1024];
+    const char *testfile;
+
+    /* Iterate over all combinations of configurations */
+    for(config_1 = 0; config_1 < (NCONFIG - 1); config_1++)
+        for(config_2 = config_1 + 1; config_2 < NCONFIG; config_2++) {
+            /* Generate filename for file 1 */
+            if(HDsnprintf(filename, sizeof(filename), "%s%s%s", filename_prefix,
+                    config_1 & CONFIG_64 ? "64" : "32",
+                    config_1 & CONFIG_LE ? "le" : "be") < 0)
+                TEST_ERROR
+
+            /* Read file 1 */
+            testfile = H5_get_srcdir_filename(filename);
+            if((fd_1 = HDopen(testfile, O_RDONLY, 0666)) < 0)
+                TEST_ERROR
+            size_1 = (size_t)HDlseek(fd_1, (HDoff_t)0, SEEK_END);
+            HDlseek(fd_1, (HDoff_t)0, SEEK_SET);
+            buf_1 = (void *)HDmalloc(size_1);
+            if(HDread(fd_1, buf_1, size_1) < 0)
+                TEST_ERROR
+            HDclose(fd_1);
+
+            /* Generate filename for file 2 */
+            if(HDsnprintf(filename, sizeof(filename), "%s%s%s", filename_prefix,
+                    config_2 & CONFIG_64 ? "64" : "32",
+                    config_2 & CONFIG_LE ? "le" : "be") < 0)
+                TEST_ERROR
+
+            /* Read file 1 */
+            testfile = H5_get_srcdir_filename(filename);
+            if((fd_2 = HDopen(testfile, O_RDONLY, 0666)) < 0)
+                TEST_ERROR
+            size_2 = (size_t)HDlseek(fd_2, (HDoff_t)0, SEEK_END);
+            HDlseek(fd_2, (HDoff_t)0, SEEK_SET);
+            buf_2 = (void *)HDmalloc(size_2);
+            if(HDread(fd_2, buf_2, size_2) < 0)
+                TEST_ERROR
+            HDclose(fd_2);
+
+            /* Decode property lists */
+            if((plist_1 = H5Pdecode(buf_1)) < 0)
+                FAIL_STACK_ERROR
+            if((plist_2 = H5Pdecode(buf_2)) < 0)
+                FAIL_STACK_ERROR
+
+            /* Compare decoded property lists */
+            if(!H5Pequal(plist_1, plist_2))
+                FAIL_PUTS_ERROR("PLIST encoding/decoding comparison failed\n")
+
+            /* Close */
+            if((H5Pclose(plist_1)) < 0)
+                FAIL_STACK_ERROR
+            if((H5Pclose(plist_2)) < 0)
+                FAIL_STACK_ERROR
+
+            HDfree(buf_1);
+            HDfree(buf_2);
+        } /* end for */
+
+    return 1;
+
+error:
+    printf("***** Plist Encode/Decode tests FAILED! *****\n");
+    return -1;
+}
+
diff --git a/test/enc_dec_plist_with_endianess.c b/test/enc_dec_plist_with_endianess.c
deleted file mode 100644
index 4469604..0000000
--- a/test/enc_dec_plist_with_endianess.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group.                                               *
- * Copyright by the Board of Trustees of the University of Illinois.         *
- * All rights reserved.                                                      *
- *                                                                           *
- * This file is part of HDF5.  The full HDF5 copyright notice, including     *
- * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-/*
- * Serial tests for encoding/decoding plists
- */
-
-#include "h5test.h"
-#include "H5srcdir.h"
-
-static int test_plists(const char *filename1, const char *filename2);
-
-int
-main(void)
-{
-    if(VERBOSE_MED)
-	printf("Encode/Decode property list endianess\n");
-
-    /******* ENCODE/DECODE DCPLS *****/
-    TESTING("DCPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/dcpl_le", "testfiles/plist_files/dcpl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE DAPLS *****/
-    TESTING("DAPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/dapl_le", "testfiles/plist_files/dapl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE DXPLS *****/
-    TESTING("DXPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/dxpl_le", "testfiles/plist_files/dxpl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE GCPLS *****/
-    TESTING("GCPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/gcpl_le", "testfiles/plist_files/gcpl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE LCPLS *****/
-    TESTING("LCPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/lcpl_le", "testfiles/plist_files/lcpl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE LAPLS *****/
-    TESTING("LAPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/lapl_le", "testfiles/plist_files/lapl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE OCPLS *****/
-    TESTING("OCPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/ocpl_le", "testfiles/plist_files/ocpl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE OCPYPLS *****/
-    TESTING("OCPYPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/ocpypl_le", "testfiles/plist_files/ocpypl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE FCPLS *****/
-    TESTING("FCPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/fcpl_le", "testfiles/plist_files/fcpl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE FAPLS *****/
-    TESTING("FAPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/fapl_le", "testfiles/plist_files/fapl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE STRCPLS *****/
-    TESTING("STRCPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/strcpl_le", "testfiles/plist_files/strcpl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    /******* ENCODE/DECODE ACPLS *****/
-    TESTING("ACPL Encoding/Decoding");
-    if(test_plists("testfiles/plist_files/acpl_le", "testfiles/plist_files/acpl_be") < 0)
-        FAIL_STACK_ERROR
-    PASSED();
-
-    return 0;
-
-error:
-    return 1;
-}
-
-static int
-test_plists(const char *filename1, const char *filename2) 
-{
-    int fd_le, fd_be;
-    size_t size_le = 0, size_be = 0;
-    void *buf_le = NULL, *buf_be = NULL;
-    hid_t plist_le, plist_be;	       	/* dataset create prop. list */
-    const char *testfile;
-
-    testfile = H5_get_srcdir_filename(filename1);
-    if((fd_le = HDopen(testfile, O_RDONLY, 0666)) < 0)
-        TEST_ERROR
-    size_le = HDlseek(fd_le, (HDoff_t)0, SEEK_END);
-    HDlseek(fd_le, (HDoff_t)0, SEEK_SET);
-    buf_le = (void *)HDmalloc(size_le);
-    if(HDread(fd_le, buf_le, size_le) < 0)
-        TEST_ERROR
-    HDclose(fd_le);
-
-    testfile = H5_get_srcdir_filename(filename2);
-    if((fd_be = HDopen(testfile, O_RDONLY, 0666)) < 0)
-        TEST_ERROR
-    size_be = HDlseek(fd_be, (HDoff_t)0, SEEK_END);
-    HDlseek(fd_be, (HDoff_t)0, SEEK_SET);
-    buf_be = (void *)HDmalloc(size_be);
-    if(HDread(fd_be, buf_be, size_be) < 0)
-        TEST_ERROR
-    HDclose(fd_be);
-
-    if((plist_le = H5Pdecode(buf_le)) < 0)
-        FAIL_STACK_ERROR
-    if((plist_be = H5Pdecode(buf_be)) < 0)
-        FAIL_STACK_ERROR
-
-    if(!H5Pequal(plist_le, plist_be))
-        FAIL_PUTS_ERROR("PLIST encoding/decoding comparison failed\n")
-
-    if((H5Pclose(plist_le)) < 0)
-        FAIL_STACK_ERROR
-    if((H5Pclose(plist_be)) < 0)
-        FAIL_STACK_ERROR
-
-    HDfree(buf_le);
-    HDfree(buf_be);
-
-    return 1;
-
-error:
-    printf("***** Plist Encode/Decode tests FAILED! *****\n");
-    return -1;
-}
-
diff --git a/test/err_compat.c b/test/err_compat.c
index 576433e..7779ddc 100644
--- a/test/err_compat.c
+++ b/test/err_compat.c
@@ -500,7 +500,7 @@ main(void)
     }
 
     if(H5Fclose(file) < 0) TEST_ERROR ;
-    h5_cleanup(FILENAME, fapl);
+    h5_clean_files(FILENAME, fapl);
 
     printf("All error API tests passed.\n");
     return 0;
@@ -510,3 +510,4 @@ main(void)
     return 1;
 }
 #endif /* H5_NO_DEPRECATED_SYMBOLS */
+
diff --git a/test/error_test.c b/test/error_test.c
index e712d86..4e4c0ef 100644
--- a/test/error_test.c
+++ b/test/error_test.c
@@ -756,7 +756,7 @@ main(void)
     if(test_filter_error(filename) < 0)
         TEST_ERROR;
 
-    h5_cleanup(FILENAME, fapl);
+    h5_clean_files(FILENAME, fapl);
 
     HDfprintf(stderr, "\nAll error API tests passed.\n");
     return 0;
diff --git a/test/farray.c b/test/farray.c
index 43b63c6..e3e59da 100644
--- a/test/farray.c
+++ b/test/farray.c
@@ -22,7 +22,7 @@
  * This file needs to access private datatypes from the H5FA package.
  * This file also needs to access the fixed array testing code.
  */
-#define H5FA_PACKAGE
+#define H5FA_FRIEND		/*suppress error about including H5FApkg	  */
 #define H5FA_TESTING
 #include "H5FApkg.h"		/* Fixed Arrays			*/
 
diff --git a/test/fheap.c b/test/fheap.c
index bb30e05..25784a9 100644
--- a/test/fheap.c
+++ b/test/fheap.c
@@ -22,7 +22,7 @@
  * This file needs to access private datatypes from the H5HF package.
  * This file also needs to access the fractal heap testing code.
  */
-#define H5HF_PACKAGE
+#define H5HF_FRIEND		/*suppress error about including H5HFpkg	  */
 #define H5HF_TESTING
 #include "H5HFpkg.h"		/* Fractal heaps			*/
 
diff --git a/test/file_image.c b/test/file_image.c
index b1b9d47..d9c782a 100644
--- a/test/file_image.c
+++ b/test/file_image.c
@@ -643,7 +643,7 @@ test_core(void)
     if(H5Fclose(file) < 0) FAIL_STACK_ERROR
 
     /* Release resources */
-    h5_cleanup(FILENAME, fapl); 
+    h5_clean_files(FILENAME, fapl); 
     HDfree(udata);
     HDfree(file_image);
     HDremove(copied_filename);
@@ -890,8 +890,7 @@ test_get_file_image(const char * test_banner,
     VERIFY(err == SUCCEED, "H5Pclose(core_fapl_id) failed.");
 
     /* tidy up */
-    result = h5_cleanup(FILENAME2, fapl);
-    VERIFY(result != 0, "h5_cleanup() failed.");
+    h5_clean_files(FILENAME2, fapl);
 
     /* discard the image buffer if it exists */
     if(image_ptr != NULL) 
@@ -1039,8 +1038,7 @@ test_get_file_image_error_rejection(void)
     VERIFY(err == SUCCEED, "H5Fclose(file_id) failed.");
 
     /* tidy up */
-    result = h5_cleanup(FILENAME2, fapl_id);
-    VERIFY(result != 0, "h5_cleanup(1) failed.");
+    h5_clean_files(FILENAME2, fapl_id);
 
     /* discard the image buffer if it exists */
     if(image_ptr != NULL) 
@@ -1145,8 +1143,7 @@ test_get_file_image_error_rejection(void)
     VERIFY(err == SUCCEED, "H5Fclose(2) failed.");
 
     /* tidy up */
-    result = h5_cleanup(FILENAME2, fapl_id);
-    VERIFY(result != 0, "h5_cleanup(2 failed.");
+    h5_clean_files(FILENAME2, fapl_id);
 
     /************************** Test #3 **********************************/
     /* set up a split file driver test file, and try to get its image 
@@ -1208,8 +1205,7 @@ test_get_file_image_error_rejection(void)
     VERIFY(err == SUCCEED, "H5Fclose(2) failed.");
 
     /* tidy up */
-    result = h5_cleanup(FILENAME2, fapl_id);
-    VERIFY(result != 0, "h5_cleanup(2 failed.");
+    h5_clean_files(FILENAME2, fapl_id);
 
     /************************** Test #4 **********************************/
     /* set up a family file driver test file, and try to get its image 
@@ -1269,8 +1265,7 @@ test_get_file_image_error_rejection(void)
     VERIFY(err == SUCCEED, "H5Fclose(2) failed.");
 
     /* tidy up */
-    result = h5_cleanup(FILENAME2, fapl_id);
-    VERIFY(result != 0, "h5_cleanup(2 failed.");
+    h5_clean_files(FILENAME2, fapl_id);
     
     PASSED();
 
@@ -1340,6 +1335,8 @@ main(void)
 
     errors += test_get_file_image_error_rejection();
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
 
     if(errors) { 
         printf("***** %d File Image TEST%s FAILED! *****\n", 
diff --git a/test/flush2.c b/test/flush2.c
index 0ee299e..e86d646 100644
--- a/test/flush2.c
+++ b/test/flush2.c
@@ -107,7 +107,7 @@ error:
 static int
 check_file(char* filename, hid_t fapl, int flag)
 {
-    hid_t	file, groups, grp;
+    hid_t	file = -1, groups = -1;
     char	name[1024];
     int		i;
 
@@ -117,6 +117,7 @@ check_file(char* filename, hid_t fapl, int flag)
     /* Open some groups */
     if((groups = H5Gopen2(file, "some_groups", H5P_DEFAULT)) < 0) goto error;
     for(i = 0; i < 100; i++) {
+        hid_t	grp;
 	sprintf(name, "grp%02u", (unsigned)i);
 	if((grp = H5Gopen2(groups, name, H5P_DEFAULT)) < 0) goto error;
 	if(H5Gclose(grp) < 0) goto error;
@@ -132,6 +133,11 @@ check_file(char* filename, hid_t fapl, int flag)
     return 0;
 
 error:
+    H5E_BEGIN_TRY {
+        H5Gclose(groups);
+        H5Fclose(file);
+    } H5E_END_TRY;
+
     return 1;
 } /* end check_file() */
 
@@ -184,14 +190,13 @@ main(void)
     h5_fixname(FILENAME[1], fapl, name, sizeof name);
     if(check_file(name, fapl, FALSE))
         PASSED()
-    else
-    {
+    else {
 #if defined H5_HAVE_WIN32_API && !defined (hdf5_EXPORTS)
-    SKIPPED();
-    puts("   DLL will flush the file even when calling _exit, skip this test temporarily");
+        SKIPPED();
+        puts("   DLL will flush the file even when calling _exit, skip this test temporarily");
 #else
-    H5_FAILED()
-    goto error;
+        H5_FAILED()
+        goto error;
 #endif
     }
     H5Eset_auto2(H5E_DEFAULT, func, NULL);
@@ -205,17 +210,16 @@ main(void)
     h5_fixname(FILENAME[2], fapl, name, sizeof name);
     if(check_file(name, fapl, TRUE))
         PASSED()
-    else
-    {
+    else {
 #if defined H5_HAVE_WIN32_API && !defined (hdf5_EXPORTS)
-    SKIPPED();
-    puts("   DLL will flush the file even when calling _exit, skip this test temporarily");
+        SKIPPED();
+        puts("   DLL will flush the file even when calling _exit, skip this test temporarily");
 #else
-    H5_FAILED()
-    goto error;
+        H5_FAILED()
+        goto error;
 #endif
-
     }
+
     H5Eset_auto2(H5E_DEFAULT, func, NULL);
 
     h5_cleanup(FILENAME, fapl);
diff --git a/test/freespace.c b/test/freespace.c
index 1338ae7..1b87974 100644
--- a/test/freespace.c
+++ b/test/freespace.c
@@ -17,13 +17,13 @@
  */
 #include "h5test.h"
 
-#define H5FS_PACKAGE
+#define H5FS_FRIEND		/*suppress error about including H5FSpkg	  */
 #define H5FS_TESTING
 #include "H5FSpkg.h"		/* Free space manager */
 
 
 /* Other private headers that this test requires */
-#define H5F_PACKAGE
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 #include "H5Fpkg.h"
 #include "H5Iprivate.h"
 #include "H5VMprivate.h"
@@ -2841,6 +2841,8 @@ main(void)
     if(env_h5_drvr == NULL)
         env_h5_drvr = "nomatch";
 
+    h5_reset();
+
     fapl = h5_fileaccess();
 
     /* make sure alignment is not set for tests to succeed */
diff --git a/test/gen_cross.c b/test/gen_cross.c
index 2d4b788..816064d 100644
--- a/test/gen_cross.c
+++ b/test/gen_cross.c
@@ -100,9 +100,9 @@ int create_nbit_dsets_float(hid_t fid, hid_t fsid, hid_t msid);
 int
 create_normal_dset(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* file and dataset handles */
-    hid_t       dcpl;
-    float       data[NX][NY];          /* data to write */
+    hid_t       dataset         = -1;   /* file and dataset handles */
+    hid_t       dcpl            = -1;
+    float       data[NX][NY];           /* data to write */
     float       fillvalue = -2.2f;
     int         i, j;
 
@@ -207,9 +207,9 @@ error:
 int
 create_scale_offset_dsets_float(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* dataset handles */
-    hid_t       dcpl;
-    float       data[NX][NY];          /* data to write */
+    hid_t       dataset             = -1;   /* dataset handles */
+    hid_t       dcpl                = -1;
+    float       data[NX][NY];               /* data to write */
     float       fillvalue = -2.2f;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
@@ -298,9 +298,9 @@ error:
 int
 create_scale_offset_dsets_double(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* dataset handles */
-    hid_t       dcpl;
-    double      data[NX][NY];          /* data to write */
+    hid_t       dataset         = -1;   /* dataset handles */
+    hid_t       dcpl            = -1;
+    double      data[NX][NY];           /* data to write */
     double      fillvalue = -2.2f;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
@@ -389,9 +389,9 @@ error:
 int
 create_scale_offset_dsets_char(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* dataset handles */
-    hid_t       dcpl;
-    char        data[NX][NY];          /* data to write */
+    hid_t       dataset         = -1;   /* dataset handles */
+    hid_t       dcpl            = -1;
+    char        data[NX][NY];           /* data to write */
     char        fillvalue = -2;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
@@ -488,9 +488,9 @@ error:
 int
 create_scale_offset_dsets_short(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* dataset handles */
-    hid_t       dcpl;
-    short       data[NX][NY];          /* data to write */
+    hid_t       dataset         = -1;   /* dataset handles */
+    hid_t       dcpl            = -1;
+    short       data[NX][NY];           /* data to write */
     short       fillvalue = -2;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
@@ -587,9 +587,9 @@ error:
 int
 create_scale_offset_dsets_int(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* dataset handles */
-    hid_t       dcpl;
-    int         data[NX][NY];          /* data to write */
+    hid_t       dataset         = -1;   /* dataset handles */
+    hid_t       dcpl            = -1;
+    int         data[NX][NY];           /* data to write */
     int         fillvalue = -2;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
@@ -687,9 +687,9 @@ error:
 int
 create_scale_offset_dsets_long_long(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* dataset handles */
-    hid_t       dcpl;
-    long long   data[NX][NY];          /* data to write */
+    hid_t       dataset         = -1;   /* dataset handles */
+    hid_t       dcpl            = -1;
+    long long   data[NX][NY];           /* data to write */
     long long   fillvalue = -2;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
@@ -786,9 +786,9 @@ error:
 int
 create_fletcher_dsets_float(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* dataset handles */
-    hid_t       dcpl;
-    float       data[NX][NY];          /* data to write */
+    hid_t       dataset         = -1;   /* dataset handles */
+    hid_t       dcpl            = -1;
+    float       data[NX][NY];           /* data to write */
     float       fillvalue = -2.2f;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
@@ -878,9 +878,9 @@ int
 create_deflate_dsets_float(hid_t fid, hid_t fsid, hid_t msid)
 {
 #ifdef H5_HAVE_FILTER_DEFLATE
-    hid_t       dataset;         /* dataset handles */
-    hid_t       dcpl;
-    float       data[NX][NY];          /* data to write */
+    hid_t       dataset         = -1;   /* dataset handles */
+    hid_t       dcpl            = -1;
+    float       data[NX][NY];           /* data to write */
     float       fillvalue = -2.2f;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
@@ -1070,9 +1070,9 @@ error:
 int
 create_shuffle_dsets_float(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* dataset handles */
-    hid_t       dcpl;
-    float       data[NX][NY];          /* data to write */
+    hid_t       dataset         = -1;   /* dataset handles */
+    hid_t       dcpl            = -1;
+    float       data[NX][NY];           /* data to write */
     float       fillvalue = -2.2f;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
@@ -1161,11 +1161,11 @@ error:
 int
 create_nbit_dsets_float(hid_t fid, hid_t fsid, hid_t msid)
 {
-    hid_t       dataset;         /* dataset handles */
-    hid_t       datatype;
-    hid_t       dcpl;
+    hid_t       dataset         = -1;   /* dataset handles */
+    hid_t       datatype        = -1;
+    hid_t       dcpl            = -1;
     size_t      precision, offset;
-    float       data[NX][NY];          /* data to write */
+    float       data[NX][NY];           /* data to write */
     float       fillvalue = -2.2f;
     hsize_t     chunk[RANK] = {CHUNK0, CHUNK1};
     int         i, j;
diff --git a/test/gen_plist.c b/test/gen_plist.c
index cd3748b..f071733 100644
--- a/test/gen_plist.c
+++ b/test/gen_plist.c
@@ -25,7 +25,7 @@
 #include "H5private.h"
 #include "hdf5.h"
 
-static int encode_plist(hid_t plist_id, int little_endian, const char *filename_le, const char *filename_be);
+static int encode_plist(hid_t plist_id, int little_endian, int word_length, const char *filename_prefix);
 
 int
 main(void)
@@ -54,6 +54,7 @@ main(void)
     unsigned min_dense;
     const char* c_to_f = "x+32";
     int little_endian;
+    int word_length;
     H5AC_cache_config_t my_cache_config = {
         H5AC__CURR_CACHE_CONFIG_VERSION,
         1 /*TRUE*/,
@@ -63,26 +64,26 @@ main(void)
         1 /*TRUE*/,
         0 /*FALSE*/,
         ( 2 * 2048 * 1024),
-        0.3,
+        0.3f,
         (64 * 1024 * 1024),
         (4 * 1024 * 1024),
         60000,
         H5C_incr__threshold,
-        0.8,
-        3.0,
+        0.8f,
+        3.0f,
         1 /*TRUE*/,
         (8 * 1024 * 1024),
         H5C_flash_incr__add_space,
-        2.0,
-        0.25,
+        2.0f,
+        0.25f,
         H5C_decr__age_out_with_threshold,
-        0.997,
-        0.8,
+        0.997f,
+        0.8f,
         1 /*TRUE*/,
         (3 * 1024 * 1024),
         3,
         0 /*FALSE*/,
-        0.2,
+        0.2f,
         (256 * 2048),
         H5AC_METADATA_WRITE_STRATEGY__PROCESS_0_ONLY};
 
@@ -99,6 +100,11 @@ main(void)
             little_endian = 0;
     }
 
+    /* check word length */
+    {
+        word_length = 8 * sizeof(void *);
+    }
+
     /* Explicitly initialize the library, since we are including the private header file */
     H5open();
 
@@ -106,6 +112,9 @@ main(void)
     if((dcpl1 = H5Pcreate(H5P_DATASET_CREATE)) < 0)
         assert(dcpl1 > 0);
 
+    if((ret = encode_plist(dcpl1, little_endian, word_length, "testfiles/plist_files/def_dcpl_")) < 0)
+        assert(ret > 0);
+
     if((ret = H5Pset_chunk(dcpl1, 1, &chunk_size)) < 0)
         assert(ret > 0);
 
@@ -131,7 +140,7 @@ main(void)
                          (hsize_t)(max_size[0] * sizeof(int)/4))) < 0)
         assert(ret > 0);
 
-    if((ret = encode_plist(dcpl1, little_endian, "testfiles/plist_files/dcpl_le", "testfiles/plist_files/dcpl_be")) < 0)
+    if((ret = encode_plist(dcpl1, little_endian, word_length, "testfiles/plist_files/dcpl_")) < 0)
         assert(ret > 0);
         
     /* release resource */
@@ -143,10 +152,13 @@ main(void)
     if((dapl1 = H5Pcreate(H5P_DATASET_ACCESS)) < 0)
         assert(dapl1 > 0);
 
+    if((ret = encode_plist(dapl1, little_endian, word_length, "testfiles/plist_files/def_dapl_")) < 0)
+        assert(ret > 0);
+        
     if((ret = H5Pset_chunk_cache(dapl1, nslots, nbytes, w0)) < 0)
         assert(ret > 0);
 
-    if((ret = encode_plist(dapl1, little_endian, "testfiles/plist_files/dapl_le", "testfiles/plist_files/dapl_be")) < 0)
+    if((ret = encode_plist(dapl1, little_endian, word_length, "testfiles/plist_files/dapl_")) < 0)
         assert(ret > 0);
         
     /* release resource */
@@ -156,6 +168,10 @@ main(void)
     /******* ENCODE/DECODE DXPLS *****/
     if((dxpl1 = H5Pcreate(H5P_DATASET_XFER)) < 0)
         assert(dxpl1 > 0);
+
+    if((ret = encode_plist(dxpl1, little_endian, word_length, "testfiles/plist_files/def_dxpl_")) < 0)
+        assert(ret > 0);
+
     if((ret = H5Pset_btree_ratios(dxpl1, 0.2f, 0.6f, 0.2f)) < 0)
         assert(ret > 0);
     if((ret = H5Pset_hyper_vector_size(dxpl1, 5)) < 0)
@@ -177,7 +193,7 @@ main(void)
     if((ret = H5Pset_data_transform(dxpl1, c_to_f)) < 0)
         assert(ret > 0);
 
-    if((ret = encode_plist(dxpl1, little_endian, "testfiles/plist_files/dxpl_le", "testfiles/plist_files/dxpl_be")) < 0)
+    if((ret = encode_plist(dxpl1, little_endian, word_length, "testfiles/plist_files/dxpl_")) < 0)
         assert(ret > 0);
         
     /* release resource */
@@ -189,6 +205,9 @@ main(void)
     if((gcpl1 = H5Pcreate(H5P_GROUP_CREATE)) < 0)
         assert(gcpl1 > 0);
 
+    if((ret = encode_plist(gcpl1, little_endian, word_length, "testfiles/plist_files/def_gcpl_")) < 0)
+        assert(ret > 0);
+
     if((ret = H5Pset_local_heap_size_hint(gcpl1, 256)) < 0)
          assert(ret > 0);
 
@@ -205,7 +224,7 @@ main(void)
     if((ret = H5Pset_link_creation_order(gcpl1, (H5P_CRT_ORDER_TRACKED | H5P_CRT_ORDER_INDEXED))) < 0)
          assert(ret > 0);
 
-    if((ret = encode_plist(gcpl1, little_endian, "testfiles/plist_files/gcpl_le", "testfiles/plist_files/gcpl_be")) < 0)
+    if((ret = encode_plist(gcpl1, little_endian, word_length, "testfiles/plist_files/gcpl_")) < 0)
         assert(ret > 0);
         
     /* release resource */
@@ -216,10 +235,13 @@ main(void)
     if((lcpl1 = H5Pcreate(H5P_LINK_CREATE)) < 0)
         assert(lcpl1 > 0);
 
+    if((ret = encode_plist(lcpl1, little_endian, word_length, "testfiles/plist_files/def_lcpl_")) < 0)
+        assert(ret > 0);
+
     if((ret = H5Pset_create_intermediate_group(lcpl1, 1 /*TRUE*/)) < 0)
         assert(ret > 0);
 
-    if((ret = encode_plist(lcpl1, little_endian, "testfiles/plist_files/lcpl_le", "testfiles/plist_files/lcpl_be")) < 0)
+    if((ret = encode_plist(lcpl1, little_endian, word_length, "testfiles/plist_files/lcpl_")) < 0)
         assert(ret > 0);
         
     /* release resource */
@@ -230,6 +252,9 @@ main(void)
     if((ocpypl1 = H5Pcreate(H5P_OBJECT_COPY)) < 0)
         assert(ocpypl1 > 0);
 
+    if((ret = encode_plist(ocpypl1, little_endian, word_length, "testfiles/plist_files/def_ocpypl_")) < 0)
+        assert(ret > 0);
+
     ret = H5Pset_copy_object(ocpypl1, H5O_COPY_EXPAND_EXT_LINK_FLAG);
     assert(ret >= 0);
 
@@ -239,7 +264,7 @@ main(void)
     ret = H5Padd_merge_committed_dtype_path(ocpypl1, "bar");
     assert(ret >= 0);
 
-    if((ret = encode_plist(ocpypl1, little_endian, "testfiles/plist_files/ocpypl_le", "testfiles/plist_files/ocpypl_be")) < 0)
+    if((ret = encode_plist(ocpypl1, little_endian, word_length, "testfiles/plist_files/ocpypl_")) < 0)
         assert(ret > 0);
         
     /* release resource */
@@ -250,6 +275,9 @@ main(void)
     if((ocpl1 = H5Pcreate(H5P_OBJECT_CREATE)) < 0)
         assert(ocpl1 > 0);
 
+    if((ret = encode_plist(ocpl1, little_endian, word_length, "testfiles/plist_files/def_ocpl_")) < 0)
+        assert(ret > 0);
+
     if((ret = H5Pset_attr_creation_order(ocpl1, (H5P_CRT_ORDER_TRACKED | H5P_CRT_ORDER_INDEXED))) < 0)
          assert(ret > 0);
 
@@ -259,7 +287,7 @@ main(void)
     if((ret = H5Pset_filter (ocpl1, H5Z_FILTER_FLETCHER32, 0, (size_t)0, NULL)) < 0)
         assert(ret > 0);
 
-    if((ret = encode_plist(ocpl1, little_endian, "testfiles/plist_files/ocpl_le", "testfiles/plist_files/ocpl_be")) < 0)
+    if((ret = encode_plist(ocpl1, little_endian, word_length, "testfiles/plist_files/ocpl_")) < 0)
         assert(ret > 0);
 
     /* release resource */
@@ -270,6 +298,9 @@ main(void)
     if((lapl1 = H5Pcreate(H5P_LINK_ACCESS)) < 0)
         assert(lapl1 > 0);
 
+    if((ret = encode_plist(lapl1, little_endian, word_length, "testfiles/plist_files/def_lapl_")) < 0)
+        assert(ret > 0);
+
     if((ret = H5Pset_nlinks(lapl1, (size_t)134)) < 0)
         assert(ret > 0);
 
@@ -292,7 +323,7 @@ main(void)
     if((ret = H5Pclose(fapl1)) < 0)
         assert(ret > 0);
 
-    if((ret = encode_plist(lapl1, little_endian, "testfiles/plist_files/lapl_le", "testfiles/plist_files/lapl_be")) < 0)
+    if((ret = encode_plist(lapl1, little_endian, word_length, "testfiles/plist_files/lapl_")) < 0)
         assert(ret > 0);
 
     /* release resource */
@@ -303,6 +334,9 @@ main(void)
     if((fapl1 = H5Pcreate(H5P_FILE_ACCESS)) < 0)
         assert(fapl1 > 0);
 
+    if((ret = encode_plist(fapl1, little_endian, word_length, "testfiles/plist_files/def_fapl_")) < 0)
+        assert(ret > 0);
+
     if((ret = H5Pset_family_offset(fapl1, 1024)) < 0)
         assert(ret > 0);
     if((ret = H5Pset_meta_block_size(fapl1, 2098452)) < 0)
@@ -330,7 +364,7 @@ main(void)
     if((ret = H5Pset_core_write_tracking(fapl1, TRUE, (size_t)(1024 * 1024))) < 0)
         assert(ret > 0);
 
-    if((ret = encode_plist(fapl1, little_endian, "testfiles/plist_files/fapl_le", "testfiles/plist_files/fapl_be")) < 0)
+    if((ret = encode_plist(fapl1, little_endian, word_length, "testfiles/plist_files/fapl_")) < 0)
         assert(ret > 0);
 
     /* release resource */
@@ -341,6 +375,9 @@ main(void)
     if((fcpl1 = H5Pcreate(H5P_FILE_CREATE)) < 0)
         assert(fcpl1 > 0);
 
+    if((ret = encode_plist(fcpl1, little_endian, word_length, "testfiles/plist_files/def_fcpl_")) < 0)
+        assert(ret > 0);
+
     if((ret = H5Pset_userblock(fcpl1, 1024) < 0))
          assert(ret > 0);
 
@@ -362,7 +399,7 @@ main(void)
     if((ret = H5Pset_sizes(fcpl1, 8, 4) < 0))
          assert(ret > 0);
 
-    if((ret = encode_plist(fcpl1, little_endian, "testfiles/plist_files/fcpl_le", "testfiles/plist_files/fcpl_be")) < 0)
+    if((ret = encode_plist(fcpl1, little_endian, word_length, "testfiles/plist_files/fcpl_")) < 0)
         assert(ret > 0);
 
     /* release resource */
@@ -373,10 +410,13 @@ main(void)
     strcpl1 = H5Pcreate(H5P_STRING_CREATE);
     assert(strcpl1 > 0);
 
+    ret = encode_plist(strcpl1, little_endian, word_length, "testfiles/plist_files/def_strcpl_");
+    assert(ret > 0);
+
     ret = H5Pset_char_encoding(strcpl1, H5T_CSET_UTF8);
     assert(ret >= 0);
 
-    ret = encode_plist(strcpl1, little_endian, "testfiles/plist_files/strcpl_le", "testfiles/plist_files/strcpl_be");
+    ret = encode_plist(strcpl1, little_endian, word_length, "testfiles/plist_files/strcpl_");
     assert(ret > 0);
 
     /* release resource */
@@ -387,10 +427,13 @@ main(void)
     acpl1 = H5Pcreate(H5P_ATTRIBUTE_CREATE);
     assert(acpl1 > 0);
 
+    ret = encode_plist(acpl1, little_endian, word_length, "testfiles/plist_files/def_acpl_");
+    assert(ret > 0);
+
     ret = H5Pset_char_encoding(acpl1, H5T_CSET_UTF8);
     assert(ret >= 0);
 
-    ret = encode_plist(acpl1, little_endian, "testfiles/plist_files/acpl_le", "testfiles/plist_files/acpl_be");
+    ret = encode_plist(acpl1, little_endian, word_length, "testfiles/plist_files/acpl_");
     assert(ret > 0);
 
     /* release resource */
@@ -401,13 +444,18 @@ main(void)
 }
 
 static int
-encode_plist(hid_t plist_id, int little_endian, const char *filename_le, const char *filename_be)
+encode_plist(hid_t plist_id, int little_endian, int word_length, const char *filename_prefix)
 {
     int fd = 0; /* file descriptor */
     herr_t ret = 0;
     void *temp_buf = NULL;
     size_t temp_size = 0;
     ssize_t write_size;
+    char filename[1024];
+
+    /* Generate filename */
+    if((ret = HDsnprintf(filename, sizeof(filename), "%s%d%s", filename_prefix, word_length, little_endian ? "le" : "be")) < 0)
+        assert(ret > 0);
 
     /* first call to encode returns only the size of the buffer needed */
     if((ret = H5Pencode(plist_id, NULL, &temp_size)) < 0)
@@ -419,10 +467,7 @@ encode_plist(hid_t plist_id, int little_endian, const char *filename_le, const c
     if((ret = H5Pencode(plist_id, temp_buf, &temp_size)) < 0)
         assert(ret > 0);
 
-    if(little_endian)
-        fd = HDopen(filename_le, O_RDWR | O_CREAT | O_TRUNC, 0666);
-    else
-        fd = HDopen(filename_be, O_RDWR | O_CREAT | O_TRUNC, 0666);
+    fd = HDopen(filename, O_RDWR | O_CREAT | O_TRUNC, 0666);
     assert(fd > 0);
 
     write_size = HDwrite(fd, temp_buf, temp_size);
diff --git a/test/getname.c b/test/getname.c
index e1bbc6b..2700b49 100644
--- a/test/getname.c
+++ b/test/getname.c
@@ -20,8 +20,8 @@
  * Purpose:     Tests the "ID to name" functionality
  */
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
-#define H5I_PACKAGE		/*suppress error about including H5Ipkg	  */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg	  */
+#define H5I_FRIEND		/*suppress error about including H5Ipkg	  */
 
 /* Define these macros to indicate that the testing APIs should be available */
 #define H5G_TESTING
diff --git a/test/h5test.c b/test/h5test.c
index aa99c1f..f16b98f 100644
--- a/test/h5test.c
+++ b/test/h5test.c
@@ -28,7 +28,7 @@
 #include "H5srcdir.h"
 
 /* Necessary for h5_verify_cached_stabs() */
-#define H5G_PACKAGE
+#define H5G_FRIEND		/*suppress error about including H5Gpkg	  */
 #define H5G_TESTING
 #include "H5Gpkg.h"
 
@@ -91,6 +91,9 @@ MPI_Info    h5_io_info_g=MPI_INFO_NULL;/* MPI INFO object for IO */
  */
 static const char *multi_letters = "msbrglo";
 
+/* Previous error reporting function */
+static H5E_auto2_t err_func = NULL;
+
 static herr_t h5_errors(hid_t estack, void *client_data);
 static char * h5_fixname_real(const char *base_name, hid_t fapl, const char *suffix, 
                               char *fullname, size_t size, hbool_t nest_printf);
@@ -122,7 +125,7 @@ h5_errors(hid_t estack, void H5_ATTR_UNUSED *client_data)
 
 
 /*-------------------------------------------------------------------------
- * Function:  h5_cleanup_files
+ * Function:  h5_clean_files
  *
  * Purpose:  Cleanup temporary test files (always).
  *    base_name contains the list of test file names.
@@ -131,13 +134,11 @@ h5_errors(hid_t estack, void H5_ATTR_UNUSED *client_data)
  *
  * Programmer:  Neil Fortner
  *              June 1, 2015
- * Original:    Albert Cheng
- *              May 28, 1998
  *
  *-------------------------------------------------------------------------
  */
 void
-h5_cleanup_files(const char *base_name[], hid_t fapl)
+h5_clean_files(const char *base_name[], hid_t fapl)
 {
     int i;
 
@@ -184,8 +185,11 @@ h5_cleanup_files(const char *base_name[], hid_t fapl)
         }
     } /* end for */
 
+    /* Close the FAPL used to access the file */
+    H5Pclose(fapl);
+
     return;
-} /* end h5_cleanup_files() */
+} /* end h5_clean_files() */
 
 
 /*-------------------------------------------------------------------------
@@ -208,14 +212,38 @@ h5_cleanup(const char *base_name[], hid_t fapl)
     int    retval = 0;
 
     if(GetTestCleanup()) {
-        /* Clean up files in base_name */
-        h5_cleanup_files(base_name, fapl);
+        /* Clean up files in base_name, and the FAPL */
+        h5_clean_files(base_name, fapl);
 
         retval = 1;
     } /* end if */
 
-    H5Pclose(fapl);
+    /* Restore the original error reporting routine */
+    h5_restore_err();
+
     return retval;
+} /* end h5_cleanup() */
+
+
+/*-------------------------------------------------------------------------
+ * Function:    h5_restore_err
+ *
+ * Purpose:     Restore the default error handler.
+ *
+ * Return:      N/A
+ *
+ * Programmer:  Quincey Koziol
+ *              Sept 10, 2015
+ *
+ *-------------------------------------------------------------------------
+ */
+void
+h5_restore_err(void)
+{
+    /* Restore the original error reporting routine */
+    HDassert(err_func != NULL);
+    H5Eset_auto2(H5E_DEFAULT, err_func, NULL);
+    err_func = NULL;
 }
 
 
@@ -237,6 +265,10 @@ h5_reset(void)
     HDfflush(stdout);
     HDfflush(stderr);
     H5close();
+
+    /* Save current error stack reporting routine and redirect to our local one */
+    HDassert(err_func == NULL);
+    H5Eget_auto2(H5E_DEFAULT, &err_func, NULL);
     H5Eset_auto2(H5E_DEFAULT, h5_errors, NULL);
 
 /*
@@ -258,12 +290,12 @@ h5_reset(void)
      */
     sprintf(filename, "/tmp/h5emit-%05d.h5", HDgetpid());
     H5E_BEGIN_TRY {
-  hid_t file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT,
-             H5P_DEFAULT);
-  hid_t grp = H5Gcreate2(file, "emit", H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
-  H5Gclose(grp);
-  H5Fclose(file);
-  HDunlink(filename);
+        hid_t file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT,
+                 H5P_DEFAULT);
+        hid_t grp = H5Gcreate2(file, "emit", H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
+        H5Gclose(grp);
+        H5Fclose(file);
+        HDunlink(filename);
     } H5E_END_TRY;
 }
 #endif /* OLD_WAY */
diff --git a/test/h5test.h b/test/h5test.h
index 9d097af..ca0eead 100644
--- a/test/h5test.h
+++ b/test/h5test.h
@@ -123,8 +123,8 @@ extern "C" {
 #endif
 
 /* Generally useful testing routines */
+H5TEST_DLL void h5_clean_files(const char *base_name[], hid_t fapl);
 H5TEST_DLL int h5_cleanup(const char *base_name[], hid_t fapl);
-H5TEST_DLL void h5_cleanup_files(const char *base_name[], hid_t fapl);
 H5TEST_DLL char *h5_fixname(const char *base_name, hid_t fapl, char *fullname, size_t size);
 H5TEST_DLL char *h5_fixname_no_suffix(const char *base_name, hid_t fapl, char *fullname, size_t size);
 H5TEST_DLL char *h5_fixname_printf(const char *base_name, hid_t fapl, char *fullname, size_t size);
@@ -132,6 +132,7 @@ H5TEST_DLL hid_t h5_fileaccess(void);
 H5TEST_DLL void h5_no_hwconv(void);
 H5TEST_DLL const char *h5_rmprefix(const char *filename);
 H5TEST_DLL void h5_reset(void);
+H5TEST_DLL void h5_restore_err(void);
 H5TEST_DLL void h5_show_hostname(void);
 H5TEST_DLL h5_stat_size_t h5_get_file_size(const char *filename, hid_t fapl);
 H5TEST_DLL int print_func(const char *format, ...);
diff --git a/test/istore.c b/test/istore.c
index d088fe8..ec7542a 100644
--- a/test/istore.c
+++ b/test/istore.c
@@ -19,7 +19,7 @@
  * Purpose:	Tests various aspects of indexed raw data storage.
  */
 
-#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 
 #include "h5test.h"
 #include "H5private.h"
diff --git a/test/links.c b/test/links.c
index ef71be7..577834d 100644
--- a/test/links.c
+++ b/test/links.c
@@ -24,7 +24,7 @@
  * This file needs to access private information from the H5G package.
  * This file also needs to access the group testing code.
  */
-#define H5G_PACKAGE
+#define H5G_FRIEND		/*suppress error about including H5Gpkg	  */
 #define H5G_TESTING
 
 #include "h5test.h"
@@ -3883,11 +3883,8 @@ external_set_elink_fapl3(hbool_t new_format)
     if(H5Pget(lapl_id, "external link fapl", &out_fapl) < 0) TEST_ERROR
     if(H5Pclose(lapl_id) < 0) TEST_ERROR
 
-    /* Try closing out_fapl should fail since H5Pclose(lapl_id) should also close its fapl */
-    H5E_BEGIN_TRY {
-        ret = H5Pclose(out_fapl);
-    } H5E_END_TRY;
-    if(ret != FAIL) TEST_ERROR
+    /* Try closing out_fapl, should succeed since H5Pget() should clone its fapl */
+    if(H5Pclose(out_fapl) < 0) TEST_ERROR
 
     /* Verify that the driver for the copied link's fapl is the "core" driver */
     if((l_fapl = H5Pget_elink_fapl(new_lapl_id)) < 0) TEST_ERROR
@@ -3897,11 +3894,8 @@ external_set_elink_fapl3(hbool_t new_format)
     if(H5Pget(new_lapl_id, "external link fapl", &out_fapl) < 0) TEST_ERROR
     if(H5Premove(new_lapl_id, "external link fapl") < 0) TEST_ERROR
 
-    /* Try closing out_fapl should fail since the property is removed from new_lapl_id */
-    H5E_BEGIN_TRY {
-        ret = H5Pclose(out_fapl);
-    } H5E_END_TRY;
-    if(ret != FAIL) TEST_ERROR
+    /* Try closing out_fapl, should succeed since H5Pget() should clone its fapl */
+    if(H5Pclose(out_fapl) < 0) TEST_ERROR
 
     if(H5Pclose(l_fapl) < 0) TEST_ERROR
     if(H5Pclose(new_lapl_id) < 0) TEST_ERROR
@@ -6240,7 +6234,7 @@ error:
 static int
 external_link_strong(hid_t fapl, hbool_t new_format)
 {
-    hid_t       my_fapl;                        /* File access property list */
+    hid_t       my_fapl = (-1);                 /* File access property list */
     hid_t       fid1 = (-1), fid2 = (-1);       /* File ID */
     hid_t       gid1 = (-1), gid2 = (-1);       /* Group IDs */
     char        objname[NAME_BUF_SIZE];         /* Object name */
@@ -6289,11 +6283,15 @@ external_link_strong(hid_t fapl, hbool_t new_format)
     if(H5Gclose(gid2) < 0) TEST_ERROR
     if(H5Fclose(fid2) < 0) TEST_ERROR
 
+    /* Close fapl */
+    if(H5Pclose(my_fapl) < 0) TEST_ERROR
+
     PASSED();
     return 0;
 
 error:
     H5E_BEGIN_TRY {
+        H5Pclose(my_fapl);
         H5Gclose(fapl);
         H5Gclose(gid2);
         H5Gclose(gid1);
diff --git a/test/links_env.c b/test/links_env.c
index 6e47667..b3fec38 100644
--- a/test/links_env.c
+++ b/test/links_env.c
@@ -17,7 +17,7 @@
  * Purpose:	Tests hard, soft (symbolic) & external links.
  */
 
-#define H5G_PACKAGE
+#define H5G_FRIEND		/*suppress error about including H5Gpkg	  */
 #define H5G_TESTING
 
 #include "h5test.h"
diff --git a/test/mf.c b/test/mf.c
index 67ebc4e..d0c3149 100644
--- a/test/mf.c
+++ b/test/mf.c
@@ -24,13 +24,13 @@
 
 #include "h5test.h"
 
-#define H5MF_PACKAGE
+#define H5MF_FRIEND		/*suppress error about including H5MFpkg	  */
 #include "H5MFpkg.h"
 
-#define H5FS_PACKAGE
+#define H5FS_FRIEND		/*suppress error about including H5FSpkg	  */
 #include "H5FSpkg.h"
 
-#define H5F_PACKAGE
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 #define H5F_TESTING
 #include "H5Fpkg.h"
 
@@ -331,9 +331,9 @@ test_mf_eoa_shrink(const char *env_h5_drvr, hid_t fapl)
     hid_t		fapl_new = -1;		/* copy of fapl */
     char		filename[FILENAME_LEN]; /* Filename to use */
     H5F_t		*f = NULL;              /* Internal file object pointer */
-    h5_stat_size_t      file_size, new_file_size; /* file size */
+    h5_stat_size_t      file_size = 0, new_file_size; /* file size */
     H5FD_mem_t 		type;
-    haddr_t		addr;
+    haddr_t		addr = 0;
     haddr_t 		ma_addr=HADDR_UNDEF, new_ma_addr=HADDR_UNDEF;
     hsize_t 		ma_size=0, new_ma_size=0;
     hbool_t             contig_addr_vfd;        /* Whether VFD used has a contigous address space */
@@ -3236,7 +3236,7 @@ test_mf_aggr_extend(const char *env_h5_drvr, hid_t fapl)
     hid_t		file = -1;              /* File ID */
     char		filename[FILENAME_LEN]; /* Filename to use */
     H5F_t		*f = NULL;              /* Internal file object pointer */
-    h5_stat_size_t      empty_size, file_size;
+    h5_stat_size_t      empty_size = 0, file_size;
     H5FD_mem_t 		type, stype;
     haddr_t		new_addr, addr, saddr;
     haddr_t 		ma_addr=HADDR_UNDEF, new_ma_addr=HADDR_UNDEF, sdata_addr=HADDR_UNDEF;
@@ -3528,7 +3528,7 @@ test_mf_aggr_absorb(const char *env_h5_drvr, hid_t fapl)
     hid_t		file = -1;              /* File ID */
     char		filename[FILENAME_LEN]; /* Filename to use */
     H5F_t		*f = NULL;              /* Internal file object pointer */
-    h5_stat_size_t      empty_size, file_size;
+    h5_stat_size_t      empty_size = 0, file_size;
     H5FD_mem_t 		type, stype;
     haddr_t		addr1, addr2, addr3, saddr1;
     haddr_t 		ma_addr=HADDR_UNDEF, new_ma_addr=HADDR_UNDEF;
@@ -3764,7 +3764,7 @@ static unsigned
 test_mf_align_eoa(const char *env_h5_drvr, hid_t fapl, hid_t new_fapl)
 {
     hid_t		file = -1;              /* File ID */
-    hid_t		fapl1;
+    hid_t		fapl1 = -1;
     char		filename[FILENAME_LEN]; /* Filename to use */
     H5F_t		*f = NULL;              /* Internal file object pointer */
     h5_stat_size_t      file_size, new_file_size;
@@ -6843,7 +6843,7 @@ test_mf_fs_drivers(hid_t fapl)
 	ret += test_mf_fs_gone(fapl_new, fcpl);
 	ret += test_mf_fs_persist(fapl_new, fcpl);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 
 	/* STDIO */
@@ -6857,7 +6857,7 @@ test_mf_fs_drivers(hid_t fapl)
 	ret += test_mf_fs_gone(fapl_new, fcpl);
 	ret += test_mf_fs_persist(fapl_new, fcpl);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 	/* CORE */
 	HDputs("Testing free-space managers with core driver");
@@ -6871,7 +6871,7 @@ test_mf_fs_drivers(hid_t fapl)
 	ret += test_mf_fs_gone(fapl_new, fcpl);
 	ret += test_mf_fs_persist(fapl_new, fcpl);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 	/* FAMILY */
 	HDputs("Testing free-space managers with family driver");
@@ -6883,7 +6883,7 @@ test_mf_fs_drivers(hid_t fapl)
 
 	ret += test_mf_fs_persist(fapl_new, fcpl);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 	/* SPLIT */
 	HDputs("Testing free-space managers with split driver");
@@ -6896,7 +6896,7 @@ test_mf_fs_drivers(hid_t fapl)
 	ret += test_mf_fs_persist(fapl_new, fcpl);
 	ret += test_mf_fs_split(fapl_new, fcpl);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 	/* MULTI */
 	HDputs("Testing free-space managers with multi driver");
@@ -6910,7 +6910,7 @@ test_mf_fs_drivers(hid_t fapl)
 
 	ret += test_mf_fs_multi(fapl_new, fcpl);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
     } /* end for new_format */
 
@@ -7262,7 +7262,7 @@ test_filespace_drivers(hid_t fapl)
 	ret += test_filespace_strategy_threshold(fapl_new);
 	ret += test_filespace_gone(fapl_new);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 	/* STDIO */
 	HDputs("Testing file space management with stdio driver");
@@ -7275,7 +7275,7 @@ test_filespace_drivers(hid_t fapl)
 	ret += test_filespace_strategy_threshold(fapl_new);
 	ret += test_filespace_gone(fapl_new);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 	/* CORE */
 	HDputs("Testing file space management with core driver");
@@ -7289,7 +7289,7 @@ test_filespace_drivers(hid_t fapl)
 	ret += test_filespace_strategy_threshold(fapl_new);
 	ret += test_filespace_gone(fapl_new);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 	/* FAMILY */
 	HDputs("Testing file space managers with family driver");
@@ -7302,7 +7302,7 @@ test_filespace_drivers(hid_t fapl)
 	ret += test_filespace_strategy_threshold(fapl_new);
 	ret += test_filespace_gone(fapl_new);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 
 	/* SPLIT */
@@ -7316,7 +7316,7 @@ test_filespace_drivers(hid_t fapl)
 	ret += test_filespace_strategy_threshold(fapl_new);
 	ret += test_filespace_gone(fapl_new);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
 	/* MULTI */
 	HDputs("Testing file space managers with multi driver");
@@ -7331,7 +7331,7 @@ test_filespace_drivers(hid_t fapl)
 	ret += test_filespace_strategy_threshold(fapl_new);
 	ret += test_filespace_gone(fapl_new);
 
-	h5_cleanup(FILENAME, fapl_new);
+	h5_clean_files(FILENAME, fapl_new);
 
     } /* end for new_format */
 
@@ -7456,6 +7456,8 @@ main(void)
     if(env_h5_drvr == NULL)
         env_h5_drvr = "nomatch";
 
+    h5_reset();
+
     fapl = h5_fileaccess();
 
     /* Make a copy of the FAPL before adjusting the alignment */
diff --git a/test/objcopy.c b/test/objcopy.c
index a73beb3..ecc3ba5 100644
--- a/test/objcopy.c
+++ b/test/objcopy.c
@@ -28,7 +28,7 @@
  * This file needs to access private information from the H5S package.
  * This file also needs to access the dataspace testing code.
  */
-#define H5S_PACKAGE
+#define H5S_FRIEND		/*suppress error about including H5Spkg	  */
 #define H5S_TESTING
 #include "H5Spkg.h"		/* Dataspaces 				*/
 
@@ -36,7 +36,7 @@
  * This file needs to access private information from the H5P package.
  * This file also needs to access the property list testing code.
  */
-#define H5P_PACKAGE
+#define H5P_FRIEND		/*suppress error about including H5Ppkg	  */
 #define H5P_TESTING
 #include "H5Ppkg.h"		/* Property Lists 			*/
 
@@ -1247,10 +1247,6 @@ compare_datasets(hid_t did, hid_t did2, hid_t pid, const void *wbuf)
         }
 
         /* Remove external file information from the dcpls */
-        /* Remove default property causes memory leak
-        if(H5Premove(dcpl, H5D_CRT_EXT_FILE_LIST_NAME) < 0) TEST_ERROR
-        if(H5Premove(dcpl2, H5D_CRT_EXT_FILE_LIST_NAME) < 0) TEST_ERROR
-        */
 
         /* reset external file information from the dcpls */
         if (H5P_reset_external_file_test(dcpl) < 0) TEST_ERROR
diff --git a/test/ohdr.c b/test/ohdr.c
index 45f2238..e178729 100644
--- a/test/ohdr.c
+++ b/test/ohdr.c
@@ -24,14 +24,14 @@
  * This file needs to access private datatypes from the H5O package.
  * This file also needs to access the object header testing code.
  */
-#define H5O_PACKAGE
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
 #define H5O_TESTING
 #include "H5Opkg.h"
 
 /*
  * This file needs to access private datatypes from the H5G package.
  */
-#define H5G_PACKAGE
+#define H5G_FRIEND		/*suppress error about including H5Gpkg	  */
 #include "H5Gpkg.h"
 
 const char *FILENAME[] = {
diff --git a/test/plugin.c b/test/plugin.c
index 74a8f4b..e34c691 100644
--- a/test/plugin.c
+++ b/test/plugin.c
@@ -26,7 +26,7 @@
 /*
  * This file needs to access private datatypes from the H5Z package.
  */
-#define H5Z_PACKAGE
+#define H5Z_FRIEND
 #include "H5Zpkg.h"
 
 /* Filters for HDF5 internal test */
@@ -768,6 +768,9 @@ main(void)
     if(H5Pclose(fapl2) < 0) TEST_ERROR
     if(H5Pclose(fapl) < 0) TEST_ERROR
    
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     puts("\nTesting reading data with with dynamic plugin filters:");
 
     /* Close the library so that all loaded plugin libraries are unloaded */
@@ -784,6 +787,9 @@ main(void)
     /* Open the groups with filters */
     nerrors += (test_groups_with_filters(file) < 0	? 1 : 0);
 
+    /* Restore the default error handler (set in h5_reset()) */
+    h5_restore_err();
+
     /* Close the library so that all loaded plugin libraries are unloaded */
     h5_reset();
     fapl = h5_fileaccess();
diff --git a/test/pool.c b/test/pool.c
index 916d45e..83c862b 100644
--- a/test/pool.c
+++ b/test/pool.c
@@ -22,7 +22,7 @@
  * This file needs to access private datatypes from the H5MP package.
  * This file also needs to access the memory pool testing code.
  */
-#define H5MP_PACKAGE
+#define H5MP_FRIEND		/*suppress error about including H5MPpkg	  */
 #define H5MP_TESTING
 #include "H5MPpkg.h"		/* Memory Pools				*/
 
diff --git a/test/stab.c b/test/stab.c
index 95e9722..7db1feb 100644
--- a/test/stab.c
+++ b/test/stab.c
@@ -18,7 +18,7 @@
  *              Tuesday, November 24, 1998
  */
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg	  */
 
 /* Define this macro to indicate that the testing APIs should be available */
 #define H5G_TESTING
diff --git a/test/tattr.c b/test/tattr.c
index 6642cf1..d96ca59 100644
--- a/test/tattr.c
+++ b/test/tattr.c
@@ -29,7 +29,7 @@
  * This file needs to access private information from the H5O package.
  * This file also needs to access the object header testing code.
  */
-#define H5O_PACKAGE
+#define H5O_FRIEND		/*suppress error about including H5Opkg	  */
 #define H5O_TESTING
 #include "H5Opkg.h"		/* Object headers 			*/
 
@@ -37,7 +37,7 @@
  * This file needs to access private information from the H5A package.
  * This file also needs to access the attribute testing code.
  */
-#define H5A_PACKAGE
+#define H5A_FRIEND		/*suppress error about including H5Apkg	  */
 #define H5A_TESTING
 #include "H5Apkg.h"		/* Attributes	 			*/
 
@@ -45,7 +45,7 @@
  * This file needs to access private information from the H5F package.
  * This file also needs to access the file testing code.
  */
-#define H5F_PACKAGE
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 #define H5F_TESTING
 #include "H5Fpkg.h"		/* File access	 			*/
 
@@ -846,7 +846,7 @@ test_attr_compound_read(hid_t fapl)
     t_class = H5Tget_class(field);
     VERIFY(t_class, H5T_INTEGER, "H5Tget_class");
     order = H5Tget_order(field);
-    VERIFY(order, H5Tget_order(H5T_NATIVE_INT), "H5Tget_order");
+    VERIFY_TYPE(order, H5Tget_order(H5T_NATIVE_INT), H5T_order_t, "%d", "H5Tget_order");
     size = H5Tget_size(field);
     VERIFY(size, H5Tget_size(H5T_NATIVE_INT), "H5Tget_size");
     H5Tclose(field);
@@ -855,7 +855,7 @@ test_attr_compound_read(hid_t fapl)
     t_class = H5Tget_class(field);
     VERIFY(t_class, H5T_FLOAT, "H5Tget_class");
     order = H5Tget_order(field);
-    VERIFY(order, H5Tget_order(H5T_NATIVE_DOUBLE), "H5Tget_order");
+    VERIFY_TYPE(order, H5Tget_order(H5T_NATIVE_DOUBLE), H5T_order_t, "%d", "H5Tget_order");
     size = H5Tget_size(field);
     VERIFY(size, H5Tget_size(H5T_NATIVE_DOUBLE), "H5Tget_size");
     H5Tclose(field);
@@ -864,7 +864,7 @@ test_attr_compound_read(hid_t fapl)
     t_class = H5Tget_class(field);
     VERIFY(t_class, H5T_INTEGER, "H5Tget_class");
     order = H5Tget_order(field);
-    VERIFY(order, H5Tget_order(H5T_NATIVE_SCHAR), "H5Tget_order");
+    VERIFY_TYPE(order, H5Tget_order(H5T_NATIVE_SCHAR), H5T_order_t, "%d", "H5Tget_order");
     size = H5Tget_size(field);
     VERIFY(size, H5Tget_size(H5T_NATIVE_SCHAR), "H5Tget_size");
     H5Tclose(field);
@@ -1229,7 +1229,7 @@ test_attr_mult_read(hid_t fapl)
     t_class = H5Tget_class(type);
     VERIFY(t_class, H5T_INTEGER, "H5Tget_class");
     order = H5Tget_order(type);
-    VERIFY(order, H5Tget_order(H5T_NATIVE_INT), "H5Tget_order");
+    VERIFY_TYPE(order, H5Tget_order(H5T_NATIVE_INT), H5T_order_t, "%d", "H5Tget_order");
     size = H5Tget_size(type);
     VERIFY(size, H5Tget_size(H5T_NATIVE_INT), "H5Tget_size");
     H5Tclose(type);
@@ -1284,7 +1284,7 @@ test_attr_mult_read(hid_t fapl)
     t_class = H5Tget_class(type);
     VERIFY(t_class, H5T_INTEGER, "H5Tget_class");
     order = H5Tget_order(type);
-    VERIFY(order, H5Tget_order(H5T_NATIVE_INT), "H5Tget_order");
+    VERIFY_TYPE(order, H5Tget_order(H5T_NATIVE_INT), H5T_order_t, "%d", "H5Tget_order");
     size = H5Tget_size(type);
     VERIFY(size, H5Tget_size(H5T_NATIVE_INT), "H5Tget_size");
     H5Tclose(type);
@@ -1342,7 +1342,7 @@ test_attr_mult_read(hid_t fapl)
     t_class = H5Tget_class(type);
     VERIFY(t_class, H5T_FLOAT, "H5Tget_class");
     order = H5Tget_order(type);
-    VERIFY(order, H5Tget_order(H5T_NATIVE_DOUBLE), "H5Tget_order");
+    VERIFY_TYPE(order, H5Tget_order(H5T_NATIVE_DOUBLE), H5T_order_t, "%d", "H5Tget_order");
     size = H5Tget_size(type);
     VERIFY(size, H5Tget_size(H5T_NATIVE_DOUBLE), "H5Tget_size");
     H5Tclose(type);
diff --git a/test/test_plugin.sh.in b/test/test_plugin.sh.in
index a6d8c50..43e76c4 100644
--- a/test/test_plugin.sh.in
+++ b/test/test_plugin.sh.in
@@ -36,7 +36,7 @@ case $(uname) in
     *)
         PLUGIN_LIB1="$FROM_DIR/libdynlib1.* $FROM_DIR/libdynlib3.*"
         PLUGIN_LIB2="$FROM_DIR/libdynlib2.*"
-        ::
+        ;;
 esac
 PLUGIN_LIBDIR1=testdir1
 PLUGIN_LIBDIR2=testdir2
diff --git a/test/testfiles/plist_files/acpl_le b/test/testfiles/plist_files/acpl_32be
index ba342d9..ba342d9 100644
--- a/test/testfiles/plist_files/acpl_le
+++ b/test/testfiles/plist_files/acpl_32be
diff --git a/test/testfiles/plist_files/acpl_be b/test/testfiles/plist_files/acpl_32le
index ba342d9..ba342d9 100644
--- a/test/testfiles/plist_files/acpl_be
+++ b/test/testfiles/plist_files/acpl_32le
diff --git a/test/testfiles/plist_files/acpl_64be b/test/testfiles/plist_files/acpl_64be
new file mode 100644
index 0000000..ba342d9
--- /dev/null
+++ b/test/testfiles/plist_files/acpl_64be
diff --git a/test/testfiles/plist_files/acpl_64le b/test/testfiles/plist_files/acpl_64le
new file mode 100644
index 0000000..ba342d9
--- /dev/null
+++ b/test/testfiles/plist_files/acpl_64le
diff --git a/test/testfiles/plist_files/dapl_le b/test/testfiles/plist_files/dapl_32be
index 4df4e7f..4df4e7f 100644
--- a/test/testfiles/plist_files/dapl_le
+++ b/test/testfiles/plist_files/dapl_32be
diff --git a/test/testfiles/plist_files/dapl_be b/test/testfiles/plist_files/dapl_32le
index 4df4e7f..4df4e7f 100644
--- a/test/testfiles/plist_files/dapl_be
+++ b/test/testfiles/plist_files/dapl_32le
diff --git a/test/testfiles/plist_files/dapl_64be b/test/testfiles/plist_files/dapl_64be
new file mode 100644
index 0000000..4df4e7f
--- /dev/null
+++ b/test/testfiles/plist_files/dapl_64be
diff --git a/test/testfiles/plist_files/dapl_64le b/test/testfiles/plist_files/dapl_64le
new file mode 100644
index 0000000..4df4e7f
--- /dev/null
+++ b/test/testfiles/plist_files/dapl_64le
diff --git a/test/testfiles/plist_files/dcpl_le b/test/testfiles/plist_files/dcpl_32be
index 667c67f..667c67f 100644
--- a/test/testfiles/plist_files/dcpl_le
+++ b/test/testfiles/plist_files/dcpl_32be
diff --git a/test/testfiles/plist_files/dcpl_be b/test/testfiles/plist_files/dcpl_32le
index 667c67f..667c67f 100644
--- a/test/testfiles/plist_files/dcpl_be
+++ b/test/testfiles/plist_files/dcpl_32le
diff --git a/test/testfiles/plist_files/dcpl_64be b/test/testfiles/plist_files/dcpl_64be
new file mode 100644
index 0000000..667c67f
--- /dev/null
+++ b/test/testfiles/plist_files/dcpl_64be
diff --git a/test/testfiles/plist_files/dcpl_64le b/test/testfiles/plist_files/dcpl_64le
new file mode 100644
index 0000000..667c67f
--- /dev/null
+++ b/test/testfiles/plist_files/dcpl_64le
diff --git a/test/testfiles/plist_files/def_acpl_32be b/test/testfiles/plist_files/def_acpl_32be
new file mode 100644
index 0000000..efd8168
--- /dev/null
+++ b/test/testfiles/plist_files/def_acpl_32be
diff --git a/test/testfiles/plist_files/def_acpl_32le b/test/testfiles/plist_files/def_acpl_32le
new file mode 100644
index 0000000..efd8168
--- /dev/null
+++ b/test/testfiles/plist_files/def_acpl_32le
diff --git a/test/testfiles/plist_files/def_acpl_64be b/test/testfiles/plist_files/def_acpl_64be
new file mode 100644
index 0000000..efd8168
--- /dev/null
+++ b/test/testfiles/plist_files/def_acpl_64be
diff --git a/test/testfiles/plist_files/def_acpl_64le b/test/testfiles/plist_files/def_acpl_64le
new file mode 100644
index 0000000..efd8168
--- /dev/null
+++ b/test/testfiles/plist_files/def_acpl_64le
diff --git a/test/testfiles/plist_files/def_dapl_32be b/test/testfiles/plist_files/def_dapl_32be
new file mode 100644
index 0000000..c9b7ea9
--- /dev/null
+++ b/test/testfiles/plist_files/def_dapl_32be
diff --git a/test/testfiles/plist_files/def_dapl_32le b/test/testfiles/plist_files/def_dapl_32le
new file mode 100644
index 0000000..c9b7ea9
--- /dev/null
+++ b/test/testfiles/plist_files/def_dapl_32le
diff --git a/test/testfiles/plist_files/def_dapl_64be b/test/testfiles/plist_files/def_dapl_64be
new file mode 100644
index 0000000..c9b7ea9
--- /dev/null
+++ b/test/testfiles/plist_files/def_dapl_64be
diff --git a/test/testfiles/plist_files/def_dapl_64le b/test/testfiles/plist_files/def_dapl_64le
new file mode 100644
index 0000000..c9b7ea9
--- /dev/null
+++ b/test/testfiles/plist_files/def_dapl_64le
diff --git a/test/testfiles/plist_files/def_dcpl_32be b/test/testfiles/plist_files/def_dcpl_32be
new file mode 100644
index 0000000..01b233c
--- /dev/null
+++ b/test/testfiles/plist_files/def_dcpl_32be
diff --git a/test/testfiles/plist_files/def_dcpl_32le b/test/testfiles/plist_files/def_dcpl_32le
new file mode 100644
index 0000000..01b233c
--- /dev/null
+++ b/test/testfiles/plist_files/def_dcpl_32le
diff --git a/test/testfiles/plist_files/def_dcpl_64be b/test/testfiles/plist_files/def_dcpl_64be
new file mode 100644
index 0000000..01b233c
--- /dev/null
+++ b/test/testfiles/plist_files/def_dcpl_64be
diff --git a/test/testfiles/plist_files/def_dcpl_64le b/test/testfiles/plist_files/def_dcpl_64le
new file mode 100644
index 0000000..01b233c
--- /dev/null
+++ b/test/testfiles/plist_files/def_dcpl_64le
diff --git a/test/testfiles/plist_files/def_dxpl_32be b/test/testfiles/plist_files/def_dxpl_32be
new file mode 100644
index 0000000..b13f456
--- /dev/null
+++ b/test/testfiles/plist_files/def_dxpl_32be
diff --git a/test/testfiles/plist_files/def_dxpl_32le b/test/testfiles/plist_files/def_dxpl_32le
new file mode 100644
index 0000000..b13f456
--- /dev/null
+++ b/test/testfiles/plist_files/def_dxpl_32le
diff --git a/test/testfiles/plist_files/def_dxpl_64be b/test/testfiles/plist_files/def_dxpl_64be
new file mode 100644
index 0000000..b13f456
--- /dev/null
+++ b/test/testfiles/plist_files/def_dxpl_64be
diff --git a/test/testfiles/plist_files/def_dxpl_64le b/test/testfiles/plist_files/def_dxpl_64le
new file mode 100644
index 0000000..b13f456
--- /dev/null
+++ b/test/testfiles/plist_files/def_dxpl_64le
diff --git a/test/testfiles/plist_files/def_fapl_32be b/test/testfiles/plist_files/def_fapl_32be
new file mode 100644
index 0000000..6b6baee
--- /dev/null
+++ b/test/testfiles/plist_files/def_fapl_32be
diff --git a/test/testfiles/plist_files/def_fapl_32le b/test/testfiles/plist_files/def_fapl_32le
new file mode 100644
index 0000000..6b6baee
--- /dev/null
+++ b/test/testfiles/plist_files/def_fapl_32le
diff --git a/test/testfiles/plist_files/def_fapl_64be b/test/testfiles/plist_files/def_fapl_64be
new file mode 100644
index 0000000..6b6baee
--- /dev/null
+++ b/test/testfiles/plist_files/def_fapl_64be
diff --git a/test/testfiles/plist_files/def_fapl_64le b/test/testfiles/plist_files/def_fapl_64le
new file mode 100644
index 0000000..6b6baee
--- /dev/null
+++ b/test/testfiles/plist_files/def_fapl_64le
diff --git a/test/testfiles/plist_files/def_fcpl_32be b/test/testfiles/plist_files/def_fcpl_32be
new file mode 100644
index 0000000..38dec23
--- /dev/null
+++ b/test/testfiles/plist_files/def_fcpl_32be
diff --git a/test/testfiles/plist_files/def_fcpl_32le b/test/testfiles/plist_files/def_fcpl_32le
new file mode 100644
index 0000000..38dec23
--- /dev/null
+++ b/test/testfiles/plist_files/def_fcpl_32le
diff --git a/test/testfiles/plist_files/def_fcpl_64be b/test/testfiles/plist_files/def_fcpl_64be
new file mode 100644
index 0000000..38dec23
--- /dev/null
+++ b/test/testfiles/plist_files/def_fcpl_64be
diff --git a/test/testfiles/plist_files/def_fcpl_64le b/test/testfiles/plist_files/def_fcpl_64le
new file mode 100644
index 0000000..38dec23
--- /dev/null
+++ b/test/testfiles/plist_files/def_fcpl_64le
diff --git a/test/testfiles/plist_files/def_gcpl_32be b/test/testfiles/plist_files/def_gcpl_32be
new file mode 100644
index 0000000..2b5a0cc
--- /dev/null
+++ b/test/testfiles/plist_files/def_gcpl_32be
diff --git a/test/testfiles/plist_files/def_gcpl_32le b/test/testfiles/plist_files/def_gcpl_32le
new file mode 100644
index 0000000..2b5a0cc
--- /dev/null
+++ b/test/testfiles/plist_files/def_gcpl_32le
diff --git a/test/testfiles/plist_files/def_gcpl_64be b/test/testfiles/plist_files/def_gcpl_64be
new file mode 100644
index 0000000..2b5a0cc
--- /dev/null
+++ b/test/testfiles/plist_files/def_gcpl_64be
diff --git a/test/testfiles/plist_files/def_gcpl_64le b/test/testfiles/plist_files/def_gcpl_64le
new file mode 100644
index 0000000..2b5a0cc
--- /dev/null
+++ b/test/testfiles/plist_files/def_gcpl_64le
diff --git a/test/testfiles/plist_files/def_lapl_32be b/test/testfiles/plist_files/def_lapl_32be
new file mode 100644
index 0000000..9cc0e96
--- /dev/null
+++ b/test/testfiles/plist_files/def_lapl_32be
diff --git a/test/testfiles/plist_files/def_lapl_32le b/test/testfiles/plist_files/def_lapl_32le
new file mode 100644
index 0000000..9cc0e96
--- /dev/null
+++ b/test/testfiles/plist_files/def_lapl_32le
diff --git a/test/testfiles/plist_files/def_lapl_64be b/test/testfiles/plist_files/def_lapl_64be
new file mode 100644
index 0000000..9cc0e96
--- /dev/null
+++ b/test/testfiles/plist_files/def_lapl_64be
diff --git a/test/testfiles/plist_files/def_lapl_64le b/test/testfiles/plist_files/def_lapl_64le
new file mode 100644
index 0000000..9cc0e96
--- /dev/null
+++ b/test/testfiles/plist_files/def_lapl_64le
diff --git a/test/testfiles/plist_files/def_lcpl_32be b/test/testfiles/plist_files/def_lcpl_32be
new file mode 100644
index 0000000..a02d26b
--- /dev/null
+++ b/test/testfiles/plist_files/def_lcpl_32be
diff --git a/test/testfiles/plist_files/def_lcpl_32le b/test/testfiles/plist_files/def_lcpl_32le
new file mode 100644
index 0000000..a02d26b
--- /dev/null
+++ b/test/testfiles/plist_files/def_lcpl_32le
diff --git a/test/testfiles/plist_files/def_lcpl_64be b/test/testfiles/plist_files/def_lcpl_64be
new file mode 100644
index 0000000..a02d26b
--- /dev/null
+++ b/test/testfiles/plist_files/def_lcpl_64be
diff --git a/test/testfiles/plist_files/def_lcpl_64le b/test/testfiles/plist_files/def_lcpl_64le
new file mode 100644
index 0000000..a02d26b
--- /dev/null
+++ b/test/testfiles/plist_files/def_lcpl_64le
diff --git a/test/testfiles/plist_files/def_ocpl_32be b/test/testfiles/plist_files/def_ocpl_32be
new file mode 100644
index 0000000..73b5ae0
--- /dev/null
+++ b/test/testfiles/plist_files/def_ocpl_32be
diff --git a/test/testfiles/plist_files/def_ocpl_32le b/test/testfiles/plist_files/def_ocpl_32le
new file mode 100644
index 0000000..73b5ae0
--- /dev/null
+++ b/test/testfiles/plist_files/def_ocpl_32le
diff --git a/test/testfiles/plist_files/def_ocpl_64be b/test/testfiles/plist_files/def_ocpl_64be
new file mode 100644
index 0000000..73b5ae0
--- /dev/null
+++ b/test/testfiles/plist_files/def_ocpl_64be
diff --git a/test/testfiles/plist_files/def_ocpl_64le b/test/testfiles/plist_files/def_ocpl_64le
new file mode 100644
index 0000000..73b5ae0
--- /dev/null
+++ b/test/testfiles/plist_files/def_ocpl_64le
diff --git a/test/testfiles/plist_files/def_ocpypl_32be b/test/testfiles/plist_files/def_ocpypl_32be
new file mode 100644
index 0000000..1ce6360
--- /dev/null
+++ b/test/testfiles/plist_files/def_ocpypl_32be
diff --git a/test/testfiles/plist_files/def_ocpypl_32le b/test/testfiles/plist_files/def_ocpypl_32le
new file mode 100644
index 0000000..1ce6360
--- /dev/null
+++ b/test/testfiles/plist_files/def_ocpypl_32le
diff --git a/test/testfiles/plist_files/def_ocpypl_64be b/test/testfiles/plist_files/def_ocpypl_64be
new file mode 100644
index 0000000..1ce6360
--- /dev/null
+++ b/test/testfiles/plist_files/def_ocpypl_64be
diff --git a/test/testfiles/plist_files/def_ocpypl_64le b/test/testfiles/plist_files/def_ocpypl_64le
new file mode 100644
index 0000000..1ce6360
--- /dev/null
+++ b/test/testfiles/plist_files/def_ocpypl_64le
diff --git a/test/testfiles/plist_files/def_strcpl_32be b/test/testfiles/plist_files/def_strcpl_32be
new file mode 100644
index 0000000..986c591
--- /dev/null
+++ b/test/testfiles/plist_files/def_strcpl_32be
diff --git a/test/testfiles/plist_files/def_strcpl_32le b/test/testfiles/plist_files/def_strcpl_32le
new file mode 100644
index 0000000..986c591
--- /dev/null
+++ b/test/testfiles/plist_files/def_strcpl_32le
diff --git a/test/testfiles/plist_files/def_strcpl_64be b/test/testfiles/plist_files/def_strcpl_64be
new file mode 100644
index 0000000..986c591
--- /dev/null
+++ b/test/testfiles/plist_files/def_strcpl_64be
diff --git a/test/testfiles/plist_files/def_strcpl_64le b/test/testfiles/plist_files/def_strcpl_64le
new file mode 100644
index 0000000..986c591
--- /dev/null
+++ b/test/testfiles/plist_files/def_strcpl_64le
diff --git a/test/testfiles/plist_files/dxpl_32be b/test/testfiles/plist_files/dxpl_32be
new file mode 100644
index 0000000..5ff2ea0
--- /dev/null
+++ b/test/testfiles/plist_files/dxpl_32be
diff --git a/test/testfiles/plist_files/dxpl_32le b/test/testfiles/plist_files/dxpl_32le
new file mode 100644
index 0000000..5ff2ea0
--- /dev/null
+++ b/test/testfiles/plist_files/dxpl_32le
diff --git a/test/testfiles/plist_files/dxpl_64be b/test/testfiles/plist_files/dxpl_64be
new file mode 100644
index 0000000..5ff2ea0
--- /dev/null
+++ b/test/testfiles/plist_files/dxpl_64be
diff --git a/test/testfiles/plist_files/dxpl_64le b/test/testfiles/plist_files/dxpl_64le
new file mode 100644
index 0000000..5ff2ea0
--- /dev/null
+++ b/test/testfiles/plist_files/dxpl_64le
diff --git a/test/testfiles/plist_files/dxpl_be b/test/testfiles/plist_files/dxpl_be
deleted file mode 100644
index b5194c8..0000000
--- a/test/testfiles/plist_files/dxpl_be
+++ /dev/null
diff --git a/test/testfiles/plist_files/dxpl_le b/test/testfiles/plist_files/dxpl_le
deleted file mode 100644
index b5194c8..0000000
--- a/test/testfiles/plist_files/dxpl_le
+++ /dev/null
diff --git a/test/testfiles/plist_files/fapl_le b/test/testfiles/plist_files/fapl_32be
index 65e2070..65e2070 100644
--- a/test/testfiles/plist_files/fapl_le
+++ b/test/testfiles/plist_files/fapl_32be
diff --git a/test/testfiles/plist_files/fapl_be b/test/testfiles/plist_files/fapl_32le
index 65e2070..65e2070 100644
--- a/test/testfiles/plist_files/fapl_be
+++ b/test/testfiles/plist_files/fapl_32le
diff --git a/test/testfiles/plist_files/fapl_64be b/test/testfiles/plist_files/fapl_64be
new file mode 100644
index 0000000..65e2070
--- /dev/null
+++ b/test/testfiles/plist_files/fapl_64be
diff --git a/test/testfiles/plist_files/fapl_64le b/test/testfiles/plist_files/fapl_64le
new file mode 100644
index 0000000..65e2070
--- /dev/null
+++ b/test/testfiles/plist_files/fapl_64le
diff --git a/test/testfiles/plist_files/fcpl_le b/test/testfiles/plist_files/fcpl_32be
index ffa5242..ffa5242 100644
--- a/test/testfiles/plist_files/fcpl_le
+++ b/test/testfiles/plist_files/fcpl_32be
diff --git a/test/testfiles/plist_files/fcpl_be b/test/testfiles/plist_files/fcpl_32le
index ffa5242..ffa5242 100644
--- a/test/testfiles/plist_files/fcpl_be
+++ b/test/testfiles/plist_files/fcpl_32le
diff --git a/test/testfiles/plist_files/fcpl_64be b/test/testfiles/plist_files/fcpl_64be
new file mode 100644
index 0000000..ffa5242
--- /dev/null
+++ b/test/testfiles/plist_files/fcpl_64be
diff --git a/test/testfiles/plist_files/fcpl_64le b/test/testfiles/plist_files/fcpl_64le
new file mode 100644
index 0000000..ffa5242
--- /dev/null
+++ b/test/testfiles/plist_files/fcpl_64le
diff --git a/test/testfiles/plist_files/gcpl_le b/test/testfiles/plist_files/gcpl_32be
index 1eec32c..1eec32c 100644
--- a/test/testfiles/plist_files/gcpl_le
+++ b/test/testfiles/plist_files/gcpl_32be
diff --git a/test/testfiles/plist_files/gcpl_be b/test/testfiles/plist_files/gcpl_32le
index 1eec32c..1eec32c 100644
--- a/test/testfiles/plist_files/gcpl_be
+++ b/test/testfiles/plist_files/gcpl_32le
diff --git a/test/testfiles/plist_files/gcpl_64be b/test/testfiles/plist_files/gcpl_64be
new file mode 100644
index 0000000..1eec32c
--- /dev/null
+++ b/test/testfiles/plist_files/gcpl_64be
diff --git a/test/testfiles/plist_files/gcpl_64le b/test/testfiles/plist_files/gcpl_64le
new file mode 100644
index 0000000..1eec32c
--- /dev/null
+++ b/test/testfiles/plist_files/gcpl_64le
diff --git a/test/testfiles/plist_files/lapl_be b/test/testfiles/plist_files/lapl_32be
index 385cfc5..e9f43e2 100644
--- a/test/testfiles/plist_files/lapl_be
+++ b/test/testfiles/plist_files/lapl_32be
diff --git a/test/testfiles/plist_files/lapl_le b/test/testfiles/plist_files/lapl_32le
index 385cfc5..e9f43e2 100644
--- a/test/testfiles/plist_files/lapl_le
+++ b/test/testfiles/plist_files/lapl_32le
diff --git a/test/testfiles/plist_files/lapl_64be b/test/testfiles/plist_files/lapl_64be
new file mode 100644
index 0000000..e9f43e2
--- /dev/null
+++ b/test/testfiles/plist_files/lapl_64be
diff --git a/test/testfiles/plist_files/lapl_64le b/test/testfiles/plist_files/lapl_64le
new file mode 100644
index 0000000..e9f43e2
--- /dev/null
+++ b/test/testfiles/plist_files/lapl_64le
diff --git a/test/testfiles/plist_files/lcpl_le b/test/testfiles/plist_files/lcpl_32be
index 4584e5c..4584e5c 100644
--- a/test/testfiles/plist_files/lcpl_le
+++ b/test/testfiles/plist_files/lcpl_32be
diff --git a/test/testfiles/plist_files/lcpl_be b/test/testfiles/plist_files/lcpl_32le
index 4584e5c..4584e5c 100644
--- a/test/testfiles/plist_files/lcpl_be
+++ b/test/testfiles/plist_files/lcpl_32le
diff --git a/test/testfiles/plist_files/lcpl_64be b/test/testfiles/plist_files/lcpl_64be
new file mode 100644
index 0000000..4584e5c
--- /dev/null
+++ b/test/testfiles/plist_files/lcpl_64be
diff --git a/test/testfiles/plist_files/lcpl_64le b/test/testfiles/plist_files/lcpl_64le
new file mode 100644
index 0000000..4584e5c
--- /dev/null
+++ b/test/testfiles/plist_files/lcpl_64le
diff --git a/test/testfiles/plist_files/ocpl_le b/test/testfiles/plist_files/ocpl_32be
index bc46636..bc46636 100644
--- a/test/testfiles/plist_files/ocpl_le
+++ b/test/testfiles/plist_files/ocpl_32be
diff --git a/test/testfiles/plist_files/ocpl_be b/test/testfiles/plist_files/ocpl_32le
index bc46636..bc46636 100644
--- a/test/testfiles/plist_files/ocpl_be
+++ b/test/testfiles/plist_files/ocpl_32le
diff --git a/test/testfiles/plist_files/ocpl_64be b/test/testfiles/plist_files/ocpl_64be
new file mode 100644
index 0000000..bc46636
--- /dev/null
+++ b/test/testfiles/plist_files/ocpl_64be
diff --git a/test/testfiles/plist_files/ocpl_64le b/test/testfiles/plist_files/ocpl_64le
new file mode 100644
index 0000000..bc46636
--- /dev/null
+++ b/test/testfiles/plist_files/ocpl_64le
diff --git a/test/testfiles/plist_files/ocpypl_le b/test/testfiles/plist_files/ocpypl_32be
index a0d826d..a0d826d 100644
--- a/test/testfiles/plist_files/ocpypl_le
+++ b/test/testfiles/plist_files/ocpypl_32be
diff --git a/test/testfiles/plist_files/ocpypl_be b/test/testfiles/plist_files/ocpypl_32le
index a0d826d..a0d826d 100644
--- a/test/testfiles/plist_files/ocpypl_be
+++ b/test/testfiles/plist_files/ocpypl_32le
diff --git a/test/testfiles/plist_files/ocpypl_64be b/test/testfiles/plist_files/ocpypl_64be
new file mode 100644
index 0000000..a0d826d
--- /dev/null
+++ b/test/testfiles/plist_files/ocpypl_64be
diff --git a/test/testfiles/plist_files/ocpypl_64le b/test/testfiles/plist_files/ocpypl_64le
new file mode 100644
index 0000000..a0d826d
--- /dev/null
+++ b/test/testfiles/plist_files/ocpypl_64le
diff --git a/test/testfiles/plist_files/strcpl_le b/test/testfiles/plist_files/strcpl_32be
index 4190a63..4190a63 100644
--- a/test/testfiles/plist_files/strcpl_le
+++ b/test/testfiles/plist_files/strcpl_32be
diff --git a/test/testfiles/plist_files/strcpl_be b/test/testfiles/plist_files/strcpl_32le
index 4190a63..4190a63 100644
--- a/test/testfiles/plist_files/strcpl_be
+++ b/test/testfiles/plist_files/strcpl_32le
diff --git a/test/testfiles/plist_files/strcpl_64be b/test/testfiles/plist_files/strcpl_64be
new file mode 100644
index 0000000..4190a63
--- /dev/null
+++ b/test/testfiles/plist_files/strcpl_64be
diff --git a/test/testfiles/plist_files/strcpl_64le b/test/testfiles/plist_files/strcpl_64le
new file mode 100644
index 0000000..4190a63
--- /dev/null
+++ b/test/testfiles/plist_files/strcpl_64le
diff --git a/test/testframe.c b/test/testframe.c
index 2dd181b..daa27c5 100644
--- a/test/testframe.c
+++ b/test/testframe.c
@@ -213,6 +213,7 @@ void TestInfo(const char *ProgName)
  */
 void TestParseCmdLine(int argc, char *argv[])
 {
+    hbool_t skipped_all = FALSE;
     int ret_code;
 
     while (argv++, --argc > 0){
@@ -248,14 +249,20 @@ void TestParseCmdLine(int argc, char *argv[])
 	}
 	else if (((HDstrcmp(*argv, "-only") == 0) ||
 				    (HDstrcmp(*argv, "-o") == 0))) {
-	    if (argc > 0){
+	    if(argc > 0) {
 		int Loop;
+
 		--argc; ++argv;
+
 		/* Skip all tests, then activate only one. */
-		for (Loop = 0; Loop < Index; Loop++)
-		    Test[Loop].SkipFlag = 1;
+                if(!skipped_all) {
+                    for(Loop = 0; Loop < Index; Loop++)
+                        Test[Loop].SkipFlag = 1;
+                    skipped_all = TRUE;
+                } /* end if */
 		SetTest(*argv, ONLYTEST);
-	    }else{
+	    } /* end if */
+            else {
 		TestUsage();
 		exit(EXIT_FAILURE);
 	    }
@@ -548,6 +555,7 @@ TestErrPrintf(const char *format, ...)
 void SetTest(const char *testname, int action)
 {
     int Loop;
+
     switch (action){
 	case SKIPTEST:
 	    for (Loop = 0; Loop < Index; Loop++)
@@ -569,17 +577,12 @@ void SetTest(const char *testname, int action)
 	    break;
 	case ONLYTEST:
 	    for (Loop = 0; Loop < Index; Loop++) {
-		if (HDstrcmp(testname, Test[Loop].Name) != 0)
-		    Test[Loop].SkipFlag = 1;
-		else {
+		if (HDstrcmp(testname, Test[Loop].Name) == 0) {
 		    /* Found it. Set it to run. Break to skip the rest. */
 		    Test[Loop].SkipFlag = 0;
 		    break;
 		}
 	    }
-	    /* skip the rest */
-	    while (++Loop < Index)
-		Test[Loop].SkipFlag = 1;
 	    break;
 	default:
 	    /* error */
diff --git a/test/tfile.c b/test/tfile.c
index 33c947f..5fc528e 100644
--- a/test/tfile.c
+++ b/test/tfile.c
@@ -32,7 +32,7 @@
  * This file needs to access private information from the H5F package.
  * This file also needs to access the file testing code.
  */
-#define H5F_PACKAGE
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 #define H5F_TESTING
 #include "H5Fpkg.h"		/* File access	 			*/
 
@@ -2796,6 +2796,10 @@ test_free_sections(hid_t fapl, char *fname)
     file = H5Fcreate(fname, H5F_ACC_TRUNC, fcpl, fapl);
     CHECK(file, FAIL, "H5Fcreate");
 
+    /* Close the FCPL */
+    ret = H5Pclose(fcpl);
+    CHECK(ret, FAIL, "H5Pclose");
+
     /* Create dataspace for datasets */
     dspace = H5Screate(H5S_SCALAR);
     CHECK(dspace, FAIL, "H5Screate");
@@ -2920,9 +2924,6 @@ test_free_sections(hid_t fapl, char *fname)
     ret = H5Fclose(file);
     CHECK(ret, FAIL, "H5Fclose");
 
-    ret = H5Pclose(fcpl);
-    CHECK(fcpl, FAIL, "H5Pclose");
-
     HDfree(saved_sect_info);
 
 } /* end test_free_sections() */
@@ -2960,7 +2961,7 @@ test_filespace_sects(void)
     test_free_sections(fapl_sec2, filename);
 
     /* close fapl_sec2 and remove the file */
-    h5_cleanup(FILENAME, fapl_sec2);
+    h5_clean_files(FILENAME, fapl_sec2);
 
 
     /* SPLIT */
@@ -2979,7 +2980,7 @@ test_filespace_sects(void)
     test_free_sections(fapl_split, filename);
 
     /* close fapl and remove the file */
-    h5_cleanup(FILENAME, fapl_split);
+    h5_clean_files(FILENAME, fapl_split);
 
 
     /* STDIO */
@@ -2998,7 +2999,8 @@ test_filespace_sects(void)
     test_free_sections(fapl_stdio, filename);
 
     /* close fapl and remove the file */
-    h5_cleanup(FILENAME, fapl_stdio);
+    h5_clean_files(FILENAME, fapl_stdio);
+
 
     /* CORE */
     MESSAGE(5, ("Testing File free space information for a core file\n"));
@@ -3016,7 +3018,7 @@ test_filespace_sects(void)
     test_free_sections(fapl_core, filename);
 
     /* close fapl_ and remove the file */
-    h5_cleanup(FILENAME, fapl_core);
+    h5_clean_files(FILENAME, fapl_core);
 
 
     /* FAMILY */
@@ -3035,7 +3037,7 @@ test_filespace_sects(void)
     test_free_sections(fapl_family, filename);
 
     /* close fapl and remove the file */
-    h5_cleanup(FILENAME, fapl_family);
+    h5_clean_files(FILENAME, fapl_family);
 
 } /* end test_filespace_sects() */
 
@@ -3155,7 +3157,7 @@ test_filespace_info(void)
             } /* end for file space strategy type */
         } /* end for free space threshold */
 
-        h5_cleanup(FILESPACE_NAME, my_fapl);
+        h5_clean_files(FILESPACE_NAME, my_fapl);
 
     } /* end for new/old format */
 
diff --git a/test/tgenprop.c b/test/tgenprop.c
index fda4161..c4f3a3f 100644
--- a/test/tgenprop.c
+++ b/test/tgenprop.c
@@ -21,7 +21,7 @@
 *
 *************************************************************/
 
-#define H5P_PACKAGE		/*suppress error about including H5Ppkg	  */
+#define H5P_FRIEND		/*suppress error about including H5Ppkg	  */
 
 /* Define this macro to indicate that the testing APIs should be available */
 #define H5P_TESTING
@@ -784,7 +784,7 @@ test_genprop_basic_list_prop(void)
     ret = H5Pget(lid1, PROP4_NAME,&prop4_value);
     CHECK_I(ret, "H5Pget");
     /* Verify the floating-poing value in this way to avoid compiler warning. */
-    if(!H5_FLT_ABS_EQUAL(prop4_value,*PROP4_DEF_VALUE))
+    if(!H5_FLT_ABS_EQUAL(prop4_value,(double)*PROP4_DEF_VALUE))
 	printf("*** UNEXPECTED VALUE from %s should be %f, but is %f at line %4d in %s\n",
 	    "H5Pget", *PROP4_DEF_VALUE, prop4_value, (int)__LINE__, __FILE__);
 
@@ -1203,9 +1203,9 @@ test_genprop_list_callback(void)
     lid1 = H5Pcreate(cid1);
     CHECK_I(lid1, "H5Pcreate");
 
-    /* The compare callback should have been called once on property 1 (to check
-     * if the create callback modified the value) */
-    VERIFY(prop1_cb_info.cmp_count, 1, "H5Pcreate");
+    /* The compare callback should not have been called once on property 1, as
+     *  the property is always copied */
+    VERIFY(prop1_cb_info.cmp_count, 0, "H5Pcreate");
     /* The compare callback should not have been called on property 3, as there
      * is no create callback */
     VERIFY(prop3_cb_info.cmp_count, 0, "H5Pcreate");
@@ -1221,9 +1221,8 @@ test_genprop_list_callback(void)
     ret = H5Pget(lid1, PROP1_NAME,&prop1_value);
     CHECK_I(ret, "H5Pget");
     VERIFY(prop1_value, *PROP1_DEF_VALUE, "H5Pget");
-    /* The compare callback should have been called once (to check if the get
-     * callback modified the value) */
-    VERIFY(prop1_cb_info.cmp_count, 2, "H5Pget");
+    /* The compare callback should not have been called */
+    VERIFY(prop1_cb_info.cmp_count, 0, "H5Pget");
     ret = H5Pget(lid1, PROP2_NAME,&prop2_value);
     CHECK_I(ret, "H5Pget");
     /* Verify the floating-poing value in this way to avoid compiler warning. */
@@ -1242,7 +1241,7 @@ test_genprop_list_callback(void)
     ret = H5Pget(lid1, PROP4_NAME,&prop4_value);
     CHECK_I(ret, "H5Pget");
     /* Verify the floating-poing value in this way to avoid compiler warning. */
-    if(!H5_FLT_ABS_EQUAL(prop4_value,*PROP4_DEF_VALUE))
+    if(!H5_FLT_ABS_EQUAL(prop4_value,(double)*PROP4_DEF_VALUE))
 	printf("*** UNEXPECTED VALUE from %s should be %f, but is %f at line %4d in %s\n",
 	    "H5Pget", *PROP4_DEF_VALUE, prop4_value, (int)__LINE__, __FILE__);
 
@@ -1266,17 +1265,15 @@ test_genprop_list_callback(void)
     if(HDmemcmp(prop1_cb_info.set_value,&prop1_new_value, PROP1_SIZE)!=0)
         TestErrPrintf("Property #1 value doesn't match!, line=%d\n",__LINE__);
 
-    /* The compare callback should have been called once (to check if the new
-     * value needed to be copied onto the property list) */
-    VERIFY(prop1_cb_info.cmp_count, 3, "H5Pset");
+    /* The compare callback should not have been called  */
+    VERIFY(prop1_cb_info.cmp_count, 0, "H5Pset");
 
     /* Set value of property #3 to different value */
     ret = H5Pset(lid1, PROP3_NAME,prop3_new_value);
     CHECK_I(ret, "H5Pset");
 
-    /* The compare callback should have been called once (to check if the new
-     * value needed to be copied onto the property list) */
-    VERIFY(prop3_cb_info.cmp_count, 1, "H5Pset");
+    /* The compare callback should not have been called */
+    VERIFY(prop3_cb_info.cmp_count, 0, "H5Pset");
 
     /* Check new value of tracked properties */
     ret = H5Pget(lid1, PROP1_NAME,&prop1_value);
@@ -1323,8 +1320,8 @@ test_genprop_list_callback(void)
     VERIFY(ret, 1, "H5Pequal");
 
     /* Verify compare callback information for properties tracked */
-    VERIFY(prop1_cb_info.cmp_count, 4, "H5Pequal");
-    VERIFY(prop3_cb_info.cmp_count, 2, "H5Pequal");
+    VERIFY(prop1_cb_info.cmp_count, 1, "H5Pequal");
+    VERIFY(prop3_cb_info.cmp_count, 1, "H5Pequal");
 
     /* Close first list */
     ret = H5Pclose(lid1);
diff --git a/test/th5o.c b/test/th5o.c
index 40844fa..90f3c9b 100644
--- a/test/th5o.c
+++ b/test/th5o.c
@@ -164,7 +164,7 @@ test_h5o_close(void)
     /* Create the group and close it with H5Oclose */
     grp = H5Gcreate2(fid, "group", H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
     CHECK(grp, FAIL, "H5Gcreate2");
-    VERIFY(H5Iget_type(grp), H5I_GROUP, "H5Iget_type");
+    VERIFY_TYPE(H5Iget_type(grp), H5I_GROUP, H5I_type_t, "%d", "H5Iget_type");
     ret = H5Oclose(grp);
     CHECK(ret, FAIL, "H5Oclose");
 
diff --git a/test/tid.c b/test/tid.c
index 68cebf3..6570b1c 100644
--- a/test/tid.c
+++ b/test/tid.c
@@ -19,7 +19,7 @@
 #include "hdf5.h"
 
 	/* Include H5Ipkg.h to calculate max number of groups */
-#define H5I_PACKAGE
+#define H5I_FRIEND		/*suppress error about including H5Ipkg	  */
 #include "H5Ipkg.h"
 
 	/* Test basic functionality of registering and deleting types and IDs */
diff --git a/test/titerate.c b/test/titerate.c
index fff13f1..98428ea 100644
--- a/test/titerate.c
+++ b/test/titerate.c
@@ -704,7 +704,7 @@ static void test_grp_memb_funcs(hid_t fapl)
     char dataset_name[NAMELEN];  /* dataset name */
     ssize_t name_len;       /* Length of object's name */
     H5G_info_t ginfo;       /* Buffer for querying object's info */
-    herr_t ret;		    /* Generic return value */
+    herr_t ret = SUCCEED;	/* Generic return value */
 
     /* Output message about test being performed */
     MESSAGE(5, ("Testing Group Member Information Functionality\n"));
diff --git a/test/tmisc.c b/test/tmisc.c
index 6a68857..fa0f150 100644
--- a/test/tmisc.c
+++ b/test/tmisc.c
@@ -23,7 +23,7 @@
 *
 *************************************************************/
 
-#define H5D_PACKAGE    /*suppress error about including H5Dpkg    */
+#define H5D_FRIEND		/*suppress error about including H5Dpkg	  */
 
 /* Define this macro to indicate that the testing APIs should be available */
 #define H5D_TESTING
@@ -1254,7 +1254,7 @@ test_misc8(void)
     tdata=wdata;
     for(u=0; u<MISC8_DIM0; u++)
         for(v=0; v<MISC8_DIM1; v++)
-            *tdata++=((u*MISC8_DIM1)+v)%13;
+            *tdata++ = (int)(((u * MISC8_DIM1) + v) % 13);
 
     /* Create a file acccess property list */
     fapl = H5Pcreate(H5P_FILE_ACCESS);
@@ -1310,7 +1310,7 @@ test_misc8(void)
     /* Check the storage size */
     storage_size = H5Dget_storage_size(did);
     CHECK(storage_size, 0, "H5Dget_storage_size");
-    VERIFY(storage_size, MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT), "H5Dget_storage_size");
+    VERIFY(storage_size, (hsize_t)(MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT)), "H5Dget_storage_size");
 
     /* Close dataset ID */
     ret = H5Dclose(did);
@@ -1336,7 +1336,7 @@ test_misc8(void)
     /* Check the storage size after data is written */
     storage_size = H5Dget_storage_size(did);
     CHECK(storage_size, 0, "H5Dget_storage_size");
-    VERIFY(storage_size, MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT), "H5Dget_storage_size");
+    VERIFY(storage_size, (hsize_t)(MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT)), "H5Dget_storage_size");
 
     /* Close dataset ID */
     ret = H5Dclose(did);
@@ -1361,7 +1361,7 @@ test_misc8(void)
     /* Check the storage size after data is written */
     storage_size = H5Dget_storage_size(did);
     CHECK(storage_size, 0, "H5Dget_storage_size");
-    VERIFY(storage_size, MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT), "H5Dget_storage_size");
+    VERIFY(storage_size, (hsize_t)(MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT)), "H5Dget_storage_size");
 
     /* Close dataset ID */
     ret = H5Dclose(did);
@@ -1405,7 +1405,7 @@ test_misc8(void)
     /* Check the storage size */
     storage_size = H5Dget_storage_size(did);
     CHECK(storage_size, 0, "H5Dget_storage_size");
-    VERIFY(storage_size, MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT), "H5Dget_storage_size");
+    VERIFY(storage_size, (hsize_t)(MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT)), "H5Dget_storage_size");
 
     /* Close dataset ID */
     ret = H5Dclose(did);
@@ -1432,7 +1432,7 @@ test_misc8(void)
     /* Check the storage size after data is written */
     storage_size = H5Dget_storage_size(did);
     CHECK(storage_size, 0, "H5Dget_storage_size");
-    VERIFY(storage_size, MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT), "H5Dget_storage_size");
+    VERIFY(storage_size, (hsize_t)(MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT)), "H5Dget_storage_size");
 
     /* Close dataset ID */
     ret = H5Dclose(did);
@@ -1462,7 +1462,7 @@ test_misc8(void)
     /* Check the storage size after data is written */
     storage_size = H5Dget_storage_size(did);
     CHECK(storage_size, 0, "H5Dget_storage_size");
-    VERIFY(storage_size, MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT), "H5Dget_storage_size");
+    VERIFY(storage_size, (hsize_t)(MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT)), "H5Dget_storage_size");
 
     /* Close dataset ID */
     ret = H5Dclose(did);
@@ -1486,7 +1486,7 @@ test_misc8(void)
 
     /* Check the storage size after only four chunks are written */
     storage_size = H5Dget_storage_size(did);
-    VERIFY(storage_size, 4 * MISC8_CHUNK_DIM0 * MISC8_CHUNK_DIM1 * H5Tget_size(H5T_NATIVE_INT), "H5Dget_storage_size");
+    VERIFY(storage_size, (hsize_t)(4 * MISC8_CHUNK_DIM0 * MISC8_CHUNK_DIM1 * H5Tget_size(H5T_NATIVE_INT)), "H5Dget_storage_size");
 
     /* Write entire dataset */
     ret = H5Dwrite(did, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, wdata);
@@ -1509,7 +1509,7 @@ test_misc8(void)
     /* Check the storage size after data is written */
     storage_size = H5Dget_storage_size(did);
     CHECK(storage_size, 0, "H5Dget_storage_size");
-    VERIFY(storage_size, MISC8_DIM0*MISC8_DIM1*H5Tget_size(H5T_NATIVE_INT), "H5Dget_storage_size");
+    VERIFY(storage_size, (hsize_t)(MISC8_DIM0 * MISC8_DIM1 * H5Tget_size(H5T_NATIVE_INT)), "H5Dget_storage_size");
 
     /* Close dataset ID */
     ret = H5Dclose(did);
@@ -2701,8 +2701,7 @@ test_misc16(void)
 {
     hid_t file;         /* File ID */
     herr_t ret;         /* Generic return value */
-    const char wdata[MISC16_SPACE_DIM][MISC16_STR_SIZE] =
-                        {"1234567", "1234567\0", "12345678", {NULL}};
+    char wdata[MISC16_SPACE_DIM][MISC16_STR_SIZE];
     char rdata[MISC16_SPACE_DIM][MISC16_STR_SIZE];  /* Information read in */
     hid_t		dataset;	/* Dataset ID			*/
     hid_t		sid;       /* Dataspace ID			*/
@@ -2710,6 +2709,13 @@ test_misc16(void)
     hsize_t		dims[] = {MISC16_SPACE_DIM};
     int                 i;
 
+    /* Initialize the data */
+    /* (Note that these are supposed to stress the code, so are a little weird) */
+    HDmemcpy(wdata[0], "1234567", MISC16_STR_SIZE);
+    HDmemcpy(wdata[1], "1234567\0", MISC16_STR_SIZE);
+    HDmemcpy(wdata[2], "12345678", MISC16_STR_SIZE);
+    HDmemcpy(wdata[3], "\0\0\0\0\0\0\0\0", MISC16_STR_SIZE);
+
     /* Create the file */
     file = H5Fcreate(MISC16_FILE, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
     CHECK(file, FAIL, "H5Fcreate");
@@ -2743,11 +2749,11 @@ test_misc16(void)
     /* Compare data read in */
     for(i = 0; i < MISC16_SPACE_DIM; i++) {
         if(HDstrlen(wdata[i]) != HDstrlen(rdata[i])) {
-            TestErrPrintf("VL data length don't match!, strlen(wdata[%d])=%d, strlen(rdata[%d])=%d\n",(int)i,(int)strlen(wdata[i]),(int)i,(int)strlen(rdata[i]));
+            TestErrPrintf("Line %u: VL data length don't match!, strlen(wdata[%d])=%d, strlen(rdata[%d])=%d\n",(unsigned)__LINE__, (int)i,(int)strlen(wdata[i]),(int)i,(int)strlen(rdata[i]));
             continue;
         } /* end if */
         if(HDstrcmp(wdata[i], rdata[i]) != 0 ) {
-            TestErrPrintf("VL data values don't match!, wdata[%d]=%s, rdata[%d]=%s\n",(int)i,wdata[i],(int)i,rdata[i]);
+            TestErrPrintf("Line %u: VL data values don't match!, wdata[%d]=%s, rdata[%d]=%s\n",(unsigned)__LINE__, (int)i,wdata[i],(int)i,rdata[i]);
             continue;
         } /* end if */
     } /* end for */
@@ -2780,8 +2786,7 @@ test_misc17(void)
 {
     hid_t file;         /* File ID */
     herr_t ret;         /* Generic return value */
-    const char wdata[MISC17_SPACE_DIM1][MISC17_SPACE_DIM2] =
-                        {"1234567", "1234567\0", "12345678", {NULL}};
+    char wdata[MISC17_SPACE_DIM1][MISC17_SPACE_DIM2];
     char rdata[MISC17_SPACE_DIM1][MISC17_SPACE_DIM2];  /* Information read in */
     hid_t		dataset;	/* Dataset ID			*/
     hid_t		sid;       /* Dataspace ID			*/
@@ -2789,6 +2794,13 @@ test_misc17(void)
     hsize_t		dims[] = {MISC17_SPACE_DIM1, MISC17_SPACE_DIM2};
     int                 i;
 
+    /* Initialize the data */
+    /* (Note that these are supposed to stress the code, so are a little weird) */
+    HDmemcpy(wdata[0], "1234567", MISC17_SPACE_DIM2);
+    HDmemcpy(wdata[1], "1234567\0", MISC17_SPACE_DIM2);
+    HDmemcpy(wdata[2], "12345678", MISC17_SPACE_DIM2);
+    HDmemcpy(wdata[3], "\0\0\0\0\0\0\0\0", MISC17_SPACE_DIM2);
+
     /* Create the file */
     file = H5Fcreate(MISC17_FILE, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
     CHECK(file, FAIL, "H5Fcreate");
@@ -2819,11 +2831,11 @@ test_misc17(void)
     /* Compare data in the way of strings. */
     for(i = 0; i < MISC17_SPACE_DIM1; i++) {
         if(HDstrlen(wdata[i]) != HDstrlen(rdata[i])) {
-            TestErrPrintf("VL data length don't match!, strlen(wdata[%d])=%d, strlen(rdata[%d])=%d\n",(int)i,(int)strlen(wdata[i]),(int)i,(int)strlen(rdata[i]));
+            TestErrPrintf("Line %u: VL data length don't match!, strlen(wdata[%d])=%d, strlen(rdata[%d])=%d\n",(unsigned)__LINE__, (int)i,(int)strlen(wdata[i]),(int)i,(int)strlen(rdata[i]));
             continue;
         } /* end if */
         if(HDstrcmp(wdata[i], rdata[i]) != 0 ) {
-            TestErrPrintf("VL data values don't match!, wdata[%d]=%s, rdata[%d]=%s\n",(int)i,wdata[i],(int)i,rdata[i]);
+            TestErrPrintf("Line %u: VL data values don't match!, wdata[%d]=%s, rdata[%d]=%s\n",(unsigned)__LINE__, (int)i,wdata[i],(int)i,rdata[i]);
             continue;
         } /* end if */
     } /* end for */
@@ -3782,6 +3794,7 @@ test_misc23(void)
     char        objname[MISC23_NAME_BUF_SIZE];  /* Name of object */
     H5O_info_t  oinfo;
     htri_t      tri_status;
+    ssize_t     namelen;
     herr_t      status;
 
     /* Output message about test being performed */
@@ -3851,8 +3864,8 @@ test_misc23(void)
     CHECK(tmp_id, FAIL, "H5Gcreate2");
 
     /* Query that the name of the new group is correct */
-    status = H5Iget_name(tmp_id, objname, (size_t)MISC23_NAME_BUF_SIZE);
-    CHECK(status, FAIL, "H5Iget_name");
+    namelen = H5Iget_name(tmp_id, objname, (size_t)MISC23_NAME_BUF_SIZE);
+    CHECK(namelen, FAIL, "H5Iget_name");
     VERIFY_STR(objname, "/A/B01/grp", "H5Iget_name");
 
     status = H5Gclose(tmp_id);
@@ -4991,7 +5004,7 @@ test_misc28(void)
 
     /* Initialize write buffer */
     for(i=0; i<MISC28_SIZE; i++)
-        buf[i] = i;
+        buf[i] = (char)i;
 
     /* Create memory dataspace and selection in file dataspace */
     sidm = H5Screate_simple(1, mdims, NULL);
@@ -5012,7 +5025,7 @@ test_misc28(void)
 
     /* Initialize write buffer */
     for(i=0; i<MISC28_SIZE; i++)
-        buf[i] = MISC28_SIZE - 1 - i;
+        buf[i] = (char)(MISC28_SIZE - 1 - i);
 
     /* Select new hyperslab */
     start[1] = 1;
diff --git a/test/tselect.c b/test/tselect.c
index 2062e73..670406d 100644
--- a/test/tselect.c
+++ b/test/tselect.c
@@ -21,7 +21,7 @@
 *
 *************************************************************/
 
-#define H5S_PACKAGE		/*suppress error about including H5Spkg	  */
+#define H5S_FRIEND		/*suppress error about including H5Spkg	  */
 
 /* Define this macro to indicate that the testing APIs should be available */
 #define H5S_TESTING
diff --git a/test/tsohm.c b/test/tsohm.c
index e22940f..b3ffac7 100644
--- a/test/tsohm.c
+++ b/test/tsohm.c
@@ -27,7 +27,7 @@
  * This file needs to access private information from the H5F package.
  * This file also needs to access the file testing code.
  */
-#define H5F_PACKAGE
+#define H5F_FRIEND		/*suppress error about including H5Fpkg	  */
 #define H5F_TESTING
 #include "H5Fpkg.h"		/* File access	 			*/
 
@@ -1279,7 +1279,7 @@ static void size2_verify_plist1(hid_t plist)
     CHECK_I(ret, "H5Pget_fill_value");
 
     ret = memcmp(&fill1, &fill1_correct, sizeof(fill1_correct));
-    VERIFY(ret, 0, memcmp);
+    VERIFY(ret, 0, "memcmp");
 
     ret = H5Tclose(dtype1_id);
     CHECK_I(ret, "H5Tclose");
@@ -1350,7 +1350,7 @@ static void size2_verify_plist2(hid_t plist)
     CHECK_I(ret, "H5Pget_fill_value");
 
     ret = HDmemcmp(&fill2, &fill2_correct, (size_t)DTYPE2_SIZE);
-    VERIFY(ret, 0, memcmp);
+    VERIFY(ret, 0, "memcmp");
 
     ret = H5Tclose(dtype2_id);
     CHECK_I(ret, "H5Tclose");
diff --git a/test/unlink.c b/test/unlink.c
index 993a7ec..c091281 100644
--- a/test/unlink.c
+++ b/test/unlink.c
@@ -20,7 +20,7 @@
  * Purpose:	Test unlinking operations.
  */
 
-#define H5G_PACKAGE		/*suppress error about including H5Gpkg	  */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg	  */
 
 /* Define this macro to indicate that the testing APIs should be available */
 #define H5G_TESTING
diff --git a/test/vds.c b/test/vds.c
index 3e1bc18..ba5fd71 100644
--- a/test/vds.c
+++ b/test/vds.c
@@ -309,7 +309,7 @@ error:
 
 
 /*-------------------------------------------------------------------------
- * Function:    test_api
+ * Function:    test_api_get_ex_dcpl
  *
  * Purpose:     Tests API functions related to virtual datasets.
  *
@@ -7536,7 +7536,8 @@ test_printf(unsigned config, hid_t fapl)
          * Test 3: 1 Source dataset mapping, 10x5 blocks, printf source file
          */
         /* Clean up files so the source files do not exist yet */
-        h5_cleanup_files(FILENAME, fapl);
+        H5Iinc_ref(fapl);       /* Prevent FAPL from being closed */
+        h5_clean_files(FILENAME, fapl);
 
         /* Clear virtual layout in DCPL */
         if(H5Pset_layout(dcpl, H5D_VIRTUAL) < 0)
@@ -7846,7 +7847,8 @@ test_printf(unsigned config, hid_t fapl)
          * source dset, extra %%s in source dataset name
          */
         /* Clean up files so the source files do not exist yet */
-        h5_cleanup_files(FILENAME, fapl);
+        H5Iinc_ref(fapl);       /* Prevent FAPL from being closed */
+        h5_clean_files(FILENAME, fapl);
 
         /* Clear virtual layout in DCPL */
         if(H5Pset_layout(dcpl, H5D_VIRTUAL) < 0)
@@ -11087,7 +11089,7 @@ error:
     } H5E_END_TRY;
 
      return 1;
-} /* end test_printf() */
+} /* end test_all() */
 
 
 /*-------------------------------------------------------------------------
@@ -11135,7 +11137,7 @@ main(void)
     if(nerrors)
         goto error;
     printf("All virtual dataset tests passed.\n");
-//    h5_cleanup(FILENAME, fapl);
+    h5_cleanup(FILENAME, fapl);
 
     return 0;
 
diff --git a/test/vfd.c b/test/vfd.c
index 4ece2ba..708474c 100644
--- a/test/vfd.c
+++ b/test/vfd.c
@@ -80,15 +80,17 @@ const char *FILENAME[] = {
 static herr_t
 test_sec2(void)
 {
-  hid_t        file            = -1;
-  hid_t        fapl            = -1;
-  hid_t        access_fapl     = -1;
+    hid_t        file            = -1;
+    hid_t        fapl            = -1;
+    hid_t        access_fapl     = -1;
     char         filename[1024];
     int          *fhandle        = NULL;
     hsize_t      file_size       = 0;
 
     TESTING("SEC2 file driver");
 
+    h5_reset();
+
     /* Set property list and file name for SEC2 driver. */
     fapl = h5_fileaccess();
     if(H5Pset_fapl_sec2(fapl) < 0)
@@ -141,107 +143,103 @@ error:
     return -1;
 }
 
-
 
 /*-------------------------------------------------------------------------
- * Function:    test_direct
+ * Function:    test_core
  *
- * Purpose:     Tests the file handle interface for DIRECT I/O driver
+ * Purpose:     Tests the file handle interface for CORE driver
  *
  * Return:      Success:        0
  *              Failure:        -1
  *
  * Programmer:  Raymond Lu
- *              Wednesday, 20 September 2006
+ *              Tuesday, Sept 24, 2002
  *
  *-------------------------------------------------------------------------
  */
 static herr_t
-test_direct(void)
+test_core(void)
 {
-#ifdef H5_HAVE_DIRECT
     hid_t       file=(-1), fapl, access_fapl = -1;
-    hid_t  dset1=-1, dset2=-1, space1=-1, space2=-1;
     char        filename[1024];
-    int         *fhandle=NULL;
+    void        *fhandle=NULL;
     hsize_t     file_size;
-    hsize_t  dims1[2], dims2[1];
-    size_t  mbound;
-    size_t  fbsize;
-    size_t  cbsize;
+    hbool_t     use_write_tracking;
+    size_t      write_tracking_page_size;
     int    *points = NULL, *check = NULL, *p1, *p2;
-    int    wdata2[DSET2_DIM] = {11,12,13,14};
-    int    rdata2[DSET2_DIM];
+    hid_t  dset1=-1, space1=-1;
+    hsize_t  dims1[2];
     int    i, j, n;
-#endif /*H5_HAVE_DIRECT*/
 
-    TESTING("DIRECT I/O file driver");
+    TESTING("CORE file driver");
 
-#ifndef H5_HAVE_DIRECT
-    SKIPPED();
-    return 0;
-#else /*H5_HAVE_DIRECT*/
+    h5_reset();
 
-    /* Set property list and file name for Direct driver.  Set memory alignment boundary
-     * and file block size to 512 which is the minimum for Linux 2.6. */
+    /* Set property list and file name for CORE driver */
     fapl = h5_fileaccess();
-    if(H5Pset_fapl_direct(fapl, MBOUNDARY, FBSIZE, CBSIZE) < 0)
-        TEST_ERROR;
-    h5_fixname(FILENAME[5], fapl, filename, sizeof filename);
-
-    /* Verify the file access properties */
-    if(H5Pget_fapl_direct(fapl, &mbound, &fbsize, &cbsize) < 0)
+    if(H5Pset_fapl_core(fapl, (size_t)CORE_INCREMENT, TRUE) < 0)
         TEST_ERROR;
-    if(mbound != MBOUNDARY || fbsize != FBSIZE || cbsize != CBSIZE)
+    if(H5Pset_core_write_tracking(fapl, TRUE, CORE_PAGE_SIZE) < 0)
         TEST_ERROR;
+    h5_fixname(FILENAME[1], fapl, filename, sizeof filename);
 
-    if(H5Pset_alignment(fapl, (hsize_t)THRESHOLD, (hsize_t)FBSIZE) < 0)
+    if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
         TEST_ERROR;
 
-    H5E_BEGIN_TRY {
-        file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl);
-    } H5E_END_TRY;
-    if(file<0) {
-        H5Pclose (fapl);
-        SKIPPED();
-        printf("  Probably the file system doesn't support Direct I/O\n");
-        return 0;
-    }
-
     /* Retrieve the access property list... */
     if ((access_fapl = H5Fget_access_plist(file)) < 0)
         TEST_ERROR;
 
     /* Check that the driver is correct */
-    if(H5FD_DIRECT != H5Pget_driver(access_fapl))
+    if(H5FD_CORE != H5Pget_driver(access_fapl))
+        TEST_ERROR;
+
+    /* Check that the backing store write tracking info was saved */
+    if(H5Pget_core_write_tracking(fapl, &use_write_tracking, &write_tracking_page_size) < 0)
+        TEST_ERROR;
+    if(TRUE != use_write_tracking)
+        TEST_ERROR;
+    if(CORE_PAGE_SIZE != write_tracking_page_size)
         TEST_ERROR;
 
     /* ...and close the property list */
     if (H5Pclose(access_fapl) < 0)
         TEST_ERROR;
 
-    /* Check file handle API */
-    if(H5Fget_vfd_handle(file, H5P_DEFAULT, (void **)&fhandle) < 0)
-        TEST_ERROR;
-    if(*fhandle<0)
+    if(H5Fget_vfd_handle(file, H5P_DEFAULT, &fhandle) < 0)
         TEST_ERROR;
+    if(fhandle==NULL)
+    {
+        printf("fhandle==NULL\n");
+               TEST_ERROR;
+    }
 
     /* Check file size API */
     if(H5Fget_filesize(file, &file_size) < 0)
         TEST_ERROR;
 
-    /* There is no guarantee of the number of metadata allocations, but it's
-     * 4 currently and the size of the file should be between 3 & 4 file buffer
-     * sizes..
+    /* There is no garantee the size of metadata in file is constant.
+     * Just try to check if it's reasonable.  Why is this 4KB?
      */
-    if(file_size < (FBSIZE * 3) || file_size >= (FBSIZE * 4))
+    if(file_size<2*KB || file_size>6*KB)
         TEST_ERROR;
 
-    /* Allocate aligned memory for data set 1. For data set 1, everything is aligned including
-     * memory address, size of data, and file address. */
-    if(0 != HDposix_memalign(&points, (size_t)FBSIZE, (size_t)(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
+    if(H5Fclose(file) < 0)
         TEST_ERROR;
-    if(0 != HDposix_memalign(&check, (size_t)FBSIZE, (size_t)(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
+
+
+    /* Open the file with backing store off for read and write.
+     * Changes won't be saved in file. */
+    if(H5Pset_fapl_core(fapl, (size_t)CORE_INCREMENT, FALSE) < 0)
+        TEST_ERROR;
+
+    if((file=H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0)
+        TEST_ERROR;
+
+    /* Allocate memory for data set. */
+    if(NULL == (points = (int *)HDmalloc(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
+        TEST_ERROR;
+    if(NULL == (check = (int *)HDmalloc(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
         TEST_ERROR;
 
     /* Initialize the dset1 */
@@ -284,47 +282,70 @@ test_direct(void)
                 printf("    Read different values than written in data set 1.\n");
                 printf("    At index %d,%d\n", i, j);
                 TEST_ERROR;
-              } /* end if */
+            } /* end if */
 
-    /* Create the data space2. For data set 2, memory address and data size are not aligned. */
-    dims2[0] = DSET2_DIM;
-    if((space2 = H5Screate_simple(1, dims2, NULL)) < 0)
+    if(H5Dclose(dset1) < 0)
         TEST_ERROR;
 
-    /* Create the dset2 */
-    if((dset2 = H5Dcreate2(file, DSET2_NAME, H5T_NATIVE_INT, space2, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
+    if(H5Fclose(file) < 0)
+        TEST_ERROR;
+
+    /* Open the file with backing store on for read and write.
+     * Changes will be saved in file. */
+    if(H5Pset_fapl_core(fapl, (size_t)CORE_INCREMENT, TRUE) < 0)
+        TEST_ERROR;
+
+    if((file = H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0)
+        TEST_ERROR;
+
+    /* Create the dset1 */
+    if((dset1 = H5Dcreate2(file, DSET1_NAME, H5T_NATIVE_INT, space1, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
         TEST_ERROR;
 
     /* Write the data to the dset1 */
-    if(H5Dwrite(dset2, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, wdata2) < 0)
+    if(H5Dwrite(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0)
         TEST_ERROR;
 
-    if(H5Dclose(dset2) < 0)
+    if(H5Dclose(dset1) < 0)
         TEST_ERROR;
 
-    if((dset2 = H5Dopen2(file, DSET2_NAME, H5P_DEFAULT)) < 0)
+    if((dset1 = H5Dopen2(file, DSET1_NAME, H5P_DEFAULT)) < 0)
+        TEST_ERROR;
+
+    /* Reallocate memory for reading buffer. */
+    HDassert(check);
+    HDfree(check);
+    if(NULL == (check = (int *)HDmalloc(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
         TEST_ERROR;
 
     /* Read the data back from dset1 */
-    if(H5Dread(dset2, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rdata2) < 0)
+    if(H5Dread(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check) < 0)
         TEST_ERROR;
 
     /* Check that the values read are the same as the values written */
-    for(i = 0; i < DSET2_DIM; i++)
-        if(wdata2[i] != rdata2[i]) {
-            H5_FAILED();
-            printf("    Read different values than written in data set 2.\n");
-            printf("    At index %d\n", i);
-            TEST_ERROR;
-        } /* end if */
+    p1 = points;
+    p2 = check;
+    for(i = 0; i < DSET1_DIM1; i++)
+        for(j = 0; j < DSET1_DIM2; j++)
+            if(*p1++ != *p2++) {
+                H5_FAILED();
+                printf("    Read different values than written in data set 1.\n");
+                printf("    At index %d,%d\n", i, j);
+                TEST_ERROR;
+            } /* end if */
 
-    if(H5Sclose(space1) < 0)
+    /* Check file size API */
+    if(H5Fget_filesize(file, &file_size) < 0)
         TEST_ERROR;
-    if(H5Dclose(dset1) < 0)
+
+    /* There is no garantee the size of metadata in file is constant.
+     * Just try to check if it's reasonable. */
+    if(file_size<64*KB || file_size>256*KB)
         TEST_ERROR;
-    if(H5Sclose(space2) < 0)
+
+    if(H5Sclose(space1) < 0)
         TEST_ERROR;
-    if(H5Dclose(dset2) < 0)
+    if(H5Dclose(dset1) < 0)
         TEST_ERROR;
     if(H5Fclose(file) < 0)
         TEST_ERROR;
@@ -334,16 +355,13 @@ test_direct(void)
     HDfree(check);
 
     h5_cleanup(FILENAME, fapl);
+
     PASSED();
     return 0;
 
 error:
     H5E_BEGIN_TRY {
         H5Pclose(fapl);
-        H5Sclose(space1);
-        H5Dclose(dset1);
-        H5Sclose(space2);
-        H5Dclose(dset2);
         H5Fclose(file);
     } H5E_END_TRY;
 
@@ -353,104 +371,110 @@ error:
         HDfree(check);
 
     return -1;
-#endif /*H5_HAVE_DIRECT*/
 }
 
 
 /*-------------------------------------------------------------------------
- * Function:    test_core
+ * Function:    test_direct
  *
- * Purpose:     Tests the file handle interface for CORE driver
+ * Purpose:     Tests the file handle interface for DIRECT I/O driver
  *
  * Return:      Success:        0
  *              Failure:        -1
  *
  * Programmer:  Raymond Lu
- *              Tuesday, Sept 24, 2002
+ *              Wednesday, 20 September 2006
  *
  *-------------------------------------------------------------------------
  */
 static herr_t
-test_core(void)
+test_direct(void)
 {
+#ifdef H5_HAVE_DIRECT
     hid_t       file=(-1), fapl, access_fapl = -1;
+    hid_t  dset1=-1, dset2=-1, space1=-1, space2=-1;
     char        filename[1024];
-    void        *fhandle=NULL;
+    int         *fhandle=NULL;
     hsize_t     file_size;
-    hbool_t     use_write_tracking;
-    size_t      write_tracking_page_size;
+    hsize_t  dims1[2], dims2[1];
+    size_t  mbound;
+    size_t  fbsize;
+    size_t  cbsize;
     int    *points = NULL, *check = NULL, *p1, *p2;
-    hid_t  dset1=-1, space1=-1;
-    hsize_t  dims1[2];
+    int    wdata2[DSET2_DIM] = {11,12,13,14};
+    int    rdata2[DSET2_DIM];
     int    i, j, n;
+#endif /*H5_HAVE_DIRECT*/
 
-    TESTING("CORE file driver");
+    TESTING("DIRECT I/O file driver");
 
-    /* Set property list and file name for CORE driver */
+#ifndef H5_HAVE_DIRECT
+    SKIPPED();
+    return 0;
+#else /*H5_HAVE_DIRECT*/
+
+    h5_reset();
+
+    /* Set property list and file name for Direct driver.  Set memory alignment boundary
+     * and file block size to 512 which is the minimum for Linux 2.6. */
     fapl = h5_fileaccess();
-    if(H5Pset_fapl_core(fapl, (size_t)CORE_INCREMENT, TRUE) < 0)
+    if(H5Pset_fapl_direct(fapl, MBOUNDARY, FBSIZE, CBSIZE) < 0)
         TEST_ERROR;
-    if(H5Pset_core_write_tracking(fapl, TRUE, CORE_PAGE_SIZE) < 0)
+    h5_fixname(FILENAME[5], fapl, filename, sizeof filename);
+
+    /* Verify the file access properties */
+    if(H5Pget_fapl_direct(fapl, &mbound, &fbsize, &cbsize) < 0)
+        TEST_ERROR;
+    if(mbound != MBOUNDARY || fbsize != FBSIZE || cbsize != CBSIZE)
         TEST_ERROR;
-    h5_fixname(FILENAME[1], fapl, filename, sizeof filename);
 
-    if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
+    if(H5Pset_alignment(fapl, (hsize_t)THRESHOLD, (hsize_t)FBSIZE) < 0)
         TEST_ERROR;
 
+    H5E_BEGIN_TRY {
+        file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl);
+    } H5E_END_TRY;
+    if(file<0) {
+        H5Pclose (fapl);
+        SKIPPED();
+        printf("  Probably the file system doesn't support Direct I/O\n");
+        return 0;
+    }
+
     /* Retrieve the access property list... */
     if ((access_fapl = H5Fget_access_plist(file)) < 0)
         TEST_ERROR;
 
     /* Check that the driver is correct */
-    if(H5FD_CORE != H5Pget_driver(access_fapl))
-        TEST_ERROR;
-
-    /* Check that the backing store write tracking info was saved */
-    if(H5Pget_core_write_tracking(fapl, &use_write_tracking, &write_tracking_page_size) < 0)
-        TEST_ERROR;
-    if(TRUE != use_write_tracking)
-        TEST_ERROR;
-    if(CORE_PAGE_SIZE != write_tracking_page_size)
+    if(H5FD_DIRECT != H5Pget_driver(access_fapl))
         TEST_ERROR;
 
     /* ...and close the property list */
     if (H5Pclose(access_fapl) < 0)
         TEST_ERROR;
 
-    if(H5Fget_vfd_handle(file, H5P_DEFAULT, &fhandle) < 0)
+    /* Check file handle API */
+    if(H5Fget_vfd_handle(file, H5P_DEFAULT, (void **)&fhandle) < 0)
+        TEST_ERROR;
+    if(*fhandle<0)
         TEST_ERROR;
-    if(fhandle==NULL)
-    {
-        printf("fhandle==NULL\n");
-               TEST_ERROR;
-    }
 
     /* Check file size API */
     if(H5Fget_filesize(file, &file_size) < 0)
         TEST_ERROR;
 
-    /* There is no garantee the size of metadata in file is constant.
-     * Just try to check if it's reasonable.  Why is this 4KB?
+    /* There is no guarantee of the number of metadata allocations, but it's
+     * 4 currently and the size of the file should be between 3 & 4 file buffer
+     * sizes..
      */
-    if(file_size<2*KB || file_size>6*KB)
-        TEST_ERROR;
-
-    if(H5Fclose(file) < 0)
-        TEST_ERROR;
-
-
-    /* Open the file with backing store off for read and write.
-     * Changes won't be saved in file. */
-    if(H5Pset_fapl_core(fapl, (size_t)CORE_INCREMENT, FALSE) < 0)
-        TEST_ERROR;
-
-    if((file=H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0)
+    if(file_size < (FBSIZE * 3) || file_size >= (FBSIZE * 4))
         TEST_ERROR;
 
-    /* Allocate memory for data set. */
-    if(NULL == (points = (int *)HDmalloc(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
+    /* Allocate aligned memory for data set 1. For data set 1, everything is aligned including
+     * memory address, size of data, and file address. */
+    if(0 != HDposix_memalign(&points, (size_t)FBSIZE, (size_t)(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
         TEST_ERROR;
-    if(NULL == (check = (int *)HDmalloc(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
+    if(0 != HDposix_memalign(&check, (size_t)FBSIZE, (size_t)(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
         TEST_ERROR;
 
     /* Initialize the dset1 */
@@ -493,71 +517,48 @@ test_core(void)
                 printf("    Read different values than written in data set 1.\n");
                 printf("    At index %d,%d\n", i, j);
                 TEST_ERROR;
-            } /* end if */
-
-    if(H5Dclose(dset1) < 0)
-        TEST_ERROR;
-
-    if(H5Fclose(file) < 0)
-        TEST_ERROR;
-
-    /* Open the file with backing store on for read and write.
-     * Changes will be saved in file. */
-    if(H5Pset_fapl_core(fapl, (size_t)CORE_INCREMENT, TRUE) < 0)
-        TEST_ERROR;
+              } /* end if */
 
-    if((file = H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0)
+    /* Create the data space2. For data set 2, memory address and data size are not aligned. */
+    dims2[0] = DSET2_DIM;
+    if((space2 = H5Screate_simple(1, dims2, NULL)) < 0)
         TEST_ERROR;
 
-    /* Create the dset1 */
-    if((dset1 = H5Dcreate2(file, DSET1_NAME, H5T_NATIVE_INT, space1, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
+    /* Create the dset2 */
+    if((dset2 = H5Dcreate2(file, DSET2_NAME, H5T_NATIVE_INT, space2, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
         TEST_ERROR;
 
     /* Write the data to the dset1 */
-    if(H5Dwrite(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0)
-        TEST_ERROR;
-
-    if(H5Dclose(dset1) < 0)
+    if(H5Dwrite(dset2, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, wdata2) < 0)
         TEST_ERROR;
 
-    if((dset1 = H5Dopen2(file, DSET1_NAME, H5P_DEFAULT)) < 0)
+    if(H5Dclose(dset2) < 0)
         TEST_ERROR;
 
-    /* Reallocate memory for reading buffer. */
-    HDassert(check);
-    HDfree(check);
-    if(NULL == (check = (int *)HDmalloc(DSET1_DIM1 * DSET1_DIM2 * sizeof(int))))
+    if((dset2 = H5Dopen2(file, DSET2_NAME, H5P_DEFAULT)) < 0)
         TEST_ERROR;
 
     /* Read the data back from dset1 */
-    if(H5Dread(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check) < 0)
+    if(H5Dread(dset2, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rdata2) < 0)
         TEST_ERROR;
 
     /* Check that the values read are the same as the values written */
-    p1 = points;
-    p2 = check;
-    for(i = 0; i < DSET1_DIM1; i++)
-        for(j = 0; j < DSET1_DIM2; j++)
-            if(*p1++ != *p2++) {
-                H5_FAILED();
-                printf("    Read different values than written in data set 1.\n");
-                printf("    At index %d,%d\n", i, j);
-                TEST_ERROR;
-            } /* end if */
-
-    /* Check file size API */
-    if(H5Fget_filesize(file, &file_size) < 0)
-        TEST_ERROR;
-
-    /* There is no garantee the size of metadata in file is constant.
-     * Just try to check if it's reasonable. */
-    if(file_size<64*KB || file_size>256*KB)
-        TEST_ERROR;
+    for(i = 0; i < DSET2_DIM; i++)
+        if(wdata2[i] != rdata2[i]) {
+            H5_FAILED();
+            printf("    Read different values than written in data set 2.\n");
+            printf("    At index %d\n", i);
+            TEST_ERROR;
+        } /* end if */
 
     if(H5Sclose(space1) < 0)
         TEST_ERROR;
     if(H5Dclose(dset1) < 0)
         TEST_ERROR;
+    if(H5Sclose(space2) < 0)
+        TEST_ERROR;
+    if(H5Dclose(dset2) < 0)
+        TEST_ERROR;
     if(H5Fclose(file) < 0)
         TEST_ERROR;
     HDassert(points);
@@ -566,13 +567,16 @@ test_core(void)
     HDfree(check);
 
     h5_cleanup(FILENAME, fapl);
-
     PASSED();
     return 0;
 
 error:
     H5E_BEGIN_TRY {
         H5Pclose(fapl);
+        H5Sclose(space1);
+        H5Dclose(dset1);
+        H5Sclose(space2);
+        H5Dclose(dset2);
         H5Fclose(file);
     } H5E_END_TRY;
 
@@ -582,6 +586,7 @@ error:
         HDfree(check);
 
     return -1;
+#endif /*H5_HAVE_DIRECT*/
 }
 
 
@@ -685,6 +690,8 @@ test_family(void)
 
     TESTING("FAMILY file driver");
 
+    h5_reset();
+
     /* Set property list and file name for FAMILY driver */
     fapl = h5_fileaccess();
 
@@ -846,6 +853,8 @@ test_family_compat(void)
 
     TESTING("FAMILY file driver backward compatibility");
 
+    h5_reset();
+
     /* Set property list and file name for FAMILY driver */
     fapl = h5_fileaccess();
 
@@ -982,6 +991,9 @@ test_multi(void)
     int         buf[MULTI_SIZE][MULTI_SIZE];
 
     TESTING("MULTI file driver");
+
+    h5_reset();
+
     /* Set file access property list for MULTI driver */
     fapl = h5_fileaccess();
 
@@ -1194,6 +1206,8 @@ test_multi_compat(void)
 
     TESTING("MULTI file driver backward compatibility");
 
+    h5_reset();
+
     /* Set file access property list for MULTI driver */
     fapl = h5_fileaccess();
 
@@ -1349,6 +1363,8 @@ test_log(void)
 
     TESTING("LOG file driver");
 
+    h5_reset();
+
     /* Set property list and file name for log driver. */
     fapl = h5_fileaccess();
     if(H5Pset_fapl_log(fapl, LOG_FILENAME, flags, buf_size) < 0)
@@ -1428,6 +1444,8 @@ test_stdio(void)
 
     TESTING("STDIO file driver");
 
+    h5_reset();
+
     /* Set property list and file name for STDIO driver. */
     fapl = h5_fileaccess();
     if(H5Pset_fapl_stdio(fapl) < 0)
@@ -1518,6 +1536,8 @@ test_windows(void)
 
 #else /* H5_HAVE_WINDOWS */
 
+    h5_reset();
+
     /* Set property list and file name for WINDOWS driver. */
     fapl = h5_fileaccess();
     if(H5Pset_fapl_windows(fapl) < 0)
@@ -1592,25 +1612,23 @@ main(void)
 {
     int nerrors = 0;
 
-    h5_reset();
-
     printf("Testing basic Virtual File Driver functionality.\n");
 
     nerrors += test_sec2() < 0           ? 1 : 0;
     nerrors += test_core() < 0           ? 1 : 0;
+    nerrors += test_direct() < 0         ? 1 : 0;
     nerrors += test_family() < 0         ? 1 : 0;
     nerrors += test_family_compat() < 0  ? 1 : 0;
     nerrors += test_multi() < 0          ? 1 : 0;
     nerrors += test_multi_compat() < 0   ? 1 : 0;
-    nerrors += test_direct() < 0         ? 1 : 0;
     nerrors += test_log() < 0            ? 1 : 0;
     nerrors += test_stdio() < 0          ? 1 : 0;
     nerrors += test_windows() < 0        ? 1 : 0;
 
     if(nerrors) {
-  printf("***** %d Virtual File Driver TEST%s FAILED! *****\n",
-    nerrors, nerrors > 1 ? "S" : "");
-  return 1;
+        printf("***** %d Virtual File Driver TEST%s FAILED! *****\n",
+            nerrors, nerrors > 1 ? "S" : "");
+        return 1;
     }
 
     printf("All Virtual File Driver tests passed.\n");
diff --git a/testpar/Makefile.in b/testpar/Makefile.in
deleted file mode 100644
index 223247a..0000000
--- a/testpar/Makefile.in
+++ /dev/null
@@ -1,1444 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# hdf5 Parallel Library Test Makefile(.in)
-#
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \
-	COPYING
-check_PROGRAMS = $(am__EXEEXT_1)
-TESTS =
-subdir = testpar
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__EXEEXT_1 = t_mpi$(EXEEXT) testphdf5$(EXEEXT) t_cache$(EXEEXT) \
-	t_pflush1$(EXEEXT) t_pflush2$(EXEEXT) t_pshutdown$(EXEEXT) \
-	t_prestart$(EXEEXT) t_init_term$(EXEEXT) t_shapesame$(EXEEXT)
-t_cache_SOURCES = t_cache.c
-t_cache_OBJECTS = t_cache.$(OBJEXT)
-t_cache_LDADD = $(LDADD)
-t_cache_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-t_init_term_SOURCES = t_init_term.c
-t_init_term_OBJECTS = t_init_term.$(OBJEXT)
-t_init_term_LDADD = $(LDADD)
-t_init_term_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-t_mpi_SOURCES = t_mpi.c
-t_mpi_OBJECTS = t_mpi.$(OBJEXT)
-t_mpi_LDADD = $(LDADD)
-t_mpi_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-t_pflush1_SOURCES = t_pflush1.c
-t_pflush1_OBJECTS = t_pflush1.$(OBJEXT)
-t_pflush1_LDADD = $(LDADD)
-t_pflush1_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-t_pflush2_SOURCES = t_pflush2.c
-t_pflush2_OBJECTS = t_pflush2.$(OBJEXT)
-t_pflush2_LDADD = $(LDADD)
-t_pflush2_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-t_prestart_SOURCES = t_prestart.c
-t_prestart_OBJECTS = t_prestart.$(OBJEXT)
-t_prestart_LDADD = $(LDADD)
-t_prestart_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-t_pshutdown_SOURCES = t_pshutdown.c
-t_pshutdown_OBJECTS = t_pshutdown.$(OBJEXT)
-t_pshutdown_LDADD = $(LDADD)
-t_pshutdown_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-t_shapesame_SOURCES = t_shapesame.c
-t_shapesame_OBJECTS = t_shapesame.$(OBJEXT)
-t_shapesame_LDADD = $(LDADD)
-t_shapesame_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-am_testphdf5_OBJECTS = testphdf5.$(OBJEXT) t_dset.$(OBJEXT) \
-	t_file.$(OBJEXT) t_file_image.$(OBJEXT) t_mdset.$(OBJEXT) \
-	t_ph5basic.$(OBJEXT) t_coll_chunk.$(OBJEXT) \
-	t_span_tree.$(OBJEXT) t_chunk_alloc.$(OBJEXT) \
-	t_filter_read.$(OBJEXT) t_prop.$(OBJEXT)
-testphdf5_OBJECTS = $(am_testphdf5_OBJECTS)
-testphdf5_LDADD = $(LDADD)
-testphdf5_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = t_cache.c t_init_term.c t_mpi.c t_pflush1.c t_pflush2.c \
-	t_prestart.c t_pshutdown.c t_shapesame.c $(testphdf5_SOURCES)
-DIST_SOURCES = t_cache.c t_init_term.c t_mpi.c t_pflush1.c t_pflush2.c \
-	t_prestart.c t_pshutdown.c t_shapesame.c $(testphdf5_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/test
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files
-# MPItest.h5 is from t_mpi
-# Para*.h5 are from testphdf
-# shutdown.h5 is from t_pshutdown
-# after_mpi_fin.h5 is from t_init_term
-# go is used for debugging. See testphdf5.c.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 MPItest.h5 \
-	Para*.h5 CacheTestDummy.h5 shutdown.h5 after_mpi_fin.h5 go
-
-# Test programs.  These are our main targets.
-#
-TEST_PROG_PARA = t_mpi testphdf5 t_cache t_pflush1 t_pflush2 t_pshutdown t_prestart t_init_term t_shapesame
-testphdf5_SOURCES = testphdf5.c t_dset.c t_file.c t_file_image.c t_mdset.c \
-	t_ph5basic.c t_coll_chunk.c t_span_tree.c t_chunk_alloc.c t_filter_read.c \
-	t_prop.c
-
-
-# The tests all depend on the hdf5 library and the test library
-LDADD = $(LIBH5TEST) $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign testpar/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign testpar/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-t_cache$(EXEEXT): $(t_cache_OBJECTS) $(t_cache_DEPENDENCIES) $(EXTRA_t_cache_DEPENDENCIES) 
-	@rm -f t_cache$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(t_cache_OBJECTS) $(t_cache_LDADD) $(LIBS)
-
-t_init_term$(EXEEXT): $(t_init_term_OBJECTS) $(t_init_term_DEPENDENCIES) $(EXTRA_t_init_term_DEPENDENCIES) 
-	@rm -f t_init_term$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(t_init_term_OBJECTS) $(t_init_term_LDADD) $(LIBS)
-
-t_mpi$(EXEEXT): $(t_mpi_OBJECTS) $(t_mpi_DEPENDENCIES) $(EXTRA_t_mpi_DEPENDENCIES) 
-	@rm -f t_mpi$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(t_mpi_OBJECTS) $(t_mpi_LDADD) $(LIBS)
-
-t_pflush1$(EXEEXT): $(t_pflush1_OBJECTS) $(t_pflush1_DEPENDENCIES) $(EXTRA_t_pflush1_DEPENDENCIES) 
-	@rm -f t_pflush1$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(t_pflush1_OBJECTS) $(t_pflush1_LDADD) $(LIBS)
-
-t_pflush2$(EXEEXT): $(t_pflush2_OBJECTS) $(t_pflush2_DEPENDENCIES) $(EXTRA_t_pflush2_DEPENDENCIES) 
-	@rm -f t_pflush2$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(t_pflush2_OBJECTS) $(t_pflush2_LDADD) $(LIBS)
-
-t_prestart$(EXEEXT): $(t_prestart_OBJECTS) $(t_prestart_DEPENDENCIES) $(EXTRA_t_prestart_DEPENDENCIES) 
-	@rm -f t_prestart$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(t_prestart_OBJECTS) $(t_prestart_LDADD) $(LIBS)
-
-t_pshutdown$(EXEEXT): $(t_pshutdown_OBJECTS) $(t_pshutdown_DEPENDENCIES) $(EXTRA_t_pshutdown_DEPENDENCIES) 
-	@rm -f t_pshutdown$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(t_pshutdown_OBJECTS) $(t_pshutdown_LDADD) $(LIBS)
-
-t_shapesame$(EXEEXT): $(t_shapesame_OBJECTS) $(t_shapesame_DEPENDENCIES) $(EXTRA_t_shapesame_DEPENDENCIES) 
-	@rm -f t_shapesame$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(t_shapesame_OBJECTS) $(t_shapesame_LDADD) $(LIBS)
-
-testphdf5$(EXEEXT): $(testphdf5_OBJECTS) $(testphdf5_DEPENDENCIES) $(EXTRA_testphdf5_DEPENDENCIES) 
-	@rm -f testphdf5$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(testphdf5_OBJECTS) $(testphdf5_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_cache.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_chunk_alloc.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_coll_chunk.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_dset.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_file.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_file_image.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_filter_read.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_init_term.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_mdset.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_mpi.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_pflush1.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_pflush2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_ph5basic.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_prestart.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_prop.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_pshutdown.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_shapesame.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_span_tree.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testphdf5.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/testpar/t_cache.c b/testpar/t_cache.c
index 42788f4..b848827 100644
--- a/testpar/t_cache.c
+++ b/testpar/t_cache.c
@@ -21,9 +21,9 @@
 #include "h5test.h"
 #include "testpar.h"
 
-#define H5AC_PACKAGE            /*suppress error about including H5ACpkg  */
-#define H5C_PACKAGE             /*suppress error about including H5Cpkg   */
-#define H5F_PACKAGE             /*suppress error about including H5Fpkg   */
+#define H5AC_FRIEND		/*suppress error about including H5ACpkg  */
+#define H5C_FRIEND		/*suppress error about including H5Cpkg   */
+#define H5F_FRIEND		/*suppress error about including H5Fpkg   */
 
 #include "H5ACpkg.h"
 #include "H5Cpkg.h"
diff --git a/testpar/t_mpi.c b/testpar/t_mpi.c
index 873b952..feea137 100644
--- a/testpar/t_mpi.c
+++ b/testpar/t_mpi.c
@@ -1235,7 +1235,7 @@ finish:
     /* turn off alarm */
     ALARM_OFF;
 
-    h5_cleanup(FILENAME, fapl);
+    h5_clean_files(FILENAME, fapl);
     H5close();
 
     /* MPI_Finalize must be called AFTER H5close which may use MPI calls */
diff --git a/testpar/t_pflush2.c b/testpar/t_pflush2.c
index 03f7c82..f9f8459 100644
--- a/testpar/t_pflush2.c
+++ b/testpar/t_pflush2.c
@@ -200,8 +200,8 @@ main(int argc, char* argv[])
 	H5Eset_auto2(H5E_DEFAULT, func, NULL);
 
 
-	h5_cleanup(&FILENAME[0], fapl1);
-	h5_cleanup(&FILENAME[1], fapl2);
+	h5_clean_files(&FILENAME[0], fapl1);
+	h5_clean_files(&FILENAME[1], fapl2);
     }
     else
     {
diff --git a/testpar/t_shapesame.c b/testpar/t_shapesame.c
index 9088470..8722ee2 100644
--- a/testpar/t_shapesame.c
+++ b/testpar/t_shapesame.c
@@ -18,7 +18,7 @@
    same shape by H5Sselect_shape_same().
  */
 
-#define H5S_PACKAGE             /*suppress error about including H5Spkg   */
+#define H5S_FRIEND             /*suppress error about including H5Spkg   */
 
 /* Define this macro to indicate that the testing APIs should be available */
 #define H5S_TESTING
@@ -5123,7 +5123,7 @@ int main(int argc, char **argv)
         TestSummary();
 
     /* Clean up test files */
-    h5_cleanup(FILENAME, fapl);
+    h5_clean_files(FILENAME, fapl);
 
     nerrors += GetTestNumErrs();
 
@@ -5148,3 +5148,4 @@ int main(int argc, char **argv)
     /* cannot just return (nerrors) because exit code is limited to 1byte */
     return(nerrors!=0);
 }
+
diff --git a/testpar/testphdf5.c b/testpar/testphdf5.c
index c3da73f..f1ec507 100644
--- a/testpar/testphdf5.c
+++ b/testpar/testphdf5.c
@@ -563,7 +563,7 @@ int main(int argc, char **argv)
         TestSummary();
 
     /* Clean up test files */
-    h5_cleanup(FILENAME, fapl);
+    h5_clean_files(FILENAME, fapl);
 
     nerrors += GetTestNumErrs();
 
diff --git a/tools/Makefile.in b/tools/Makefile.in
deleted file mode 100644
index 50153ae..0000000
--- a/tools/Makefile.in
+++ /dev/null
@@ -1,1374 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tools HDF5 Makefile(.in)
-#
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/test-driver COPYING
-TESTS =
-subdir = tools
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	check recheck distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-CONFIG = ordered
-
-# All subdirectories
-SUBDIRS = lib h5diff h5ls h5dump misc h5import h5repack h5jam h5copy h5stat \
-    perform
-
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign tools/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
-all-am: Makefile all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) check-am install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
-	check check-TESTS check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags ctags-am distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
-	recheck tags tags-am uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tools/h5copy/Makefile.in b/tools/h5copy/Makefile.in
deleted file mode 100644
index 3900396..0000000
--- a/tools/h5copy/Makefile.in
+++ /dev/null
@@ -1,1436 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Makefile(.in)
-#
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/testh5copy.sh.in $(top_srcdir)/bin/depcomp \
-	$(top_srcdir)/bin/test-driver
-bin_PROGRAMS = h5copy$(EXEEXT)
-check_PROGRAMS = $(am__EXEEXT_1)
-TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
-subdir = tools/h5copy
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = testh5copy.sh
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-am__EXEEXT_1 = h5copygentest$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-h5copy_SOURCES = h5copy.c
-h5copy_OBJECTS = h5copy.$(OBJEXT)
-h5copy_LDADD = $(LDADD)
-h5copy_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-h5copy_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h5copy_LDFLAGS) $(LDFLAGS) -o $@
-am_h5copygentest_OBJECTS = h5copygentest.$(OBJEXT)
-h5copygentest_OBJECTS = $(am_h5copygentest_OBJECTS)
-h5copygentest_LDADD = $(LDADD)
-h5copygentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = h5copy.c $(h5copygentest_SOURCES)
-DIST_SOURCES = h5copy.c $(h5copygentest_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src and tools/lib directories
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/tools/lib
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files.  *.h5 are generated by h5dumpgentest.  They should
-# copied to the testfiles/ directory if update is required.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
-
-# Test programs and scripts
-TEST_PROG = h5copygentest
-TEST_SCRIPT = testh5copy.sh
-check_SCRIPTS = $(TEST_SCRIPT)
-SCRIPT_DEPEND = h5copy$(EXEEXT)
-
-# Add h5copy specific linker flags here
-h5copy_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-
-# source file for the test file generator
-h5copygentest_SOURCES = h5copygentest.c
-
-# All programs depend on the hdf5 and h5tools libraries
-LDADD = $(LIBH5TOOLS) $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5copy/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign tools/h5copy/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-testh5copy.sh: $(top_builddir)/config.status $(srcdir)/testh5copy.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
-	 || test -f $$p1 \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' \
-	    -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
-	`; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-h5copy$(EXEEXT): $(h5copy_OBJECTS) $(h5copy_DEPENDENCIES) $(EXTRA_h5copy_DEPENDENCIES) 
-	@rm -f h5copy$(EXEEXT)
-	$(AM_V_CCLD)$(h5copy_LINK) $(h5copy_OBJECTS) $(h5copy_LDADD) $(LIBS)
-
-h5copygentest$(EXEEXT): $(h5copygentest_OBJECTS) $(h5copygentest_DEPENDENCIES) $(EXTRA_h5copygentest_DEPENDENCIES) 
-	@rm -f h5copygentest$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(h5copygentest_OBJECTS) $(h5copygentest_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5copy.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5copygentest.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-h5copygentest.log: h5copygentest$(EXEEXT)
-	@p='h5copygentest$(EXEEXT)'; \
-	b='h5copygentest'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
-	clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-generic clean-libtool cscopelist-am ctags ctags-am \
-	distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in
deleted file mode 100644
index ebfb680..0000000
--- a/tools/h5diff/Makefile.in
+++ /dev/null
@@ -1,1460 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Makefile(.in)
-#
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/testh5diff.sh.in $(srcdir)/testph5diff.sh.in \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
-bin_PROGRAMS = h5diff$(EXEEXT) $(am__EXEEXT_1)
-check_PROGRAMS = $(am__EXEEXT_2)
-TESTS = $(am__EXEEXT_2) $(TEST_SCRIPT)
-subdir = tools/h5diff
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = testh5diff.sh testph5diff.sh
-CONFIG_CLEAN_VPATH_FILES =
-@BUILD_PARALLEL_CONDITIONAL_TRUE@am__EXEEXT_1 = ph5diff$(EXEEXT)
-am__installdirs = "$(DESTDIR)$(bindir)"
-am__EXEEXT_2 = h5diffgentest$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-am_h5diff_OBJECTS = h5diff_main.$(OBJEXT) h5diff_common.$(OBJEXT)
-h5diff_OBJECTS = $(am_h5diff_OBJECTS)
-h5diff_LDADD = $(LDADD)
-h5diff_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-h5diff_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h5diff_LDFLAGS) $(LDFLAGS) -o $@
-am_h5diffgentest_OBJECTS = h5diffgentest.$(OBJEXT)
-h5diffgentest_OBJECTS = $(am_h5diffgentest_OBJECTS)
-h5diffgentest_LDADD = $(LDADD)
-h5diffgentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-am_ph5diff_OBJECTS = ph5diff_main.$(OBJEXT) h5diff_common.$(OBJEXT)
-ph5diff_OBJECTS = $(am_ph5diff_OBJECTS)
-ph5diff_LDADD = $(LDADD)
-ph5diff_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = $(h5diff_SOURCES) $(h5diffgentest_SOURCES) \
-	$(ph5diff_SOURCES)
-DIST_SOURCES = $(h5diff_SOURCES) $(h5diffgentest_SOURCES) \
-	$(ph5diff_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src and tools/lib directories
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/tools/lib
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files.  *.h5 are generated by h5diff.  They should
-# be copied to the testfiles/ directory if update is required
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 expect_sorted \
-	actual_sorted
-
-# Always build and test h5diff but build and test ph5diff only if parallel
-# is enabled.
-@BUILD_PARALLEL_CONDITIONAL_TRUE@H5PDIFF = ph5diff
-@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_SCRIPT_PARA = testph5diff.sh
-
-# Add h5diff specific linker flags here
-h5diff_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-
-# Test programs and scripts
-TEST_PROG = h5diffgentest
-TEST_SCRIPT = testh5diff.sh
-check_SCRIPTS = $(TEST_SCRIPT) $(TEST_SCRIPT_PARA)
-# The parallel test script testph5diff.sh actually depends on testh5diff.sh.
-SCRIPT_DEPEND = h5diff$(EXEEXT) $(H5PDIFF) testh5diff.sh
-
-# Source files for the program
-h5diff_SOURCES = h5diff_main.c h5diff_common.c
-ph5diff_SOURCES = ph5diff_main.c h5diff_common.c
-h5diffgentest_SOURCES = h5diffgentest.c
-
-# Programs depend on the main HDF5 library and tools library
-LDADD = $(LIBH5TOOLS) $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5diff/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign tools/h5diff/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-testh5diff.sh: $(top_builddir)/config.status $(srcdir)/testh5diff.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-testph5diff.sh: $(top_builddir)/config.status $(srcdir)/testph5diff.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
-	 || test -f $$p1 \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' \
-	    -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
-	`; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-h5diff$(EXEEXT): $(h5diff_OBJECTS) $(h5diff_DEPENDENCIES) $(EXTRA_h5diff_DEPENDENCIES) 
-	@rm -f h5diff$(EXEEXT)
-	$(AM_V_CCLD)$(h5diff_LINK) $(h5diff_OBJECTS) $(h5diff_LDADD) $(LIBS)
-
-h5diffgentest$(EXEEXT): $(h5diffgentest_OBJECTS) $(h5diffgentest_DEPENDENCIES) $(EXTRA_h5diffgentest_DEPENDENCIES) 
-	@rm -f h5diffgentest$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(h5diffgentest_OBJECTS) $(h5diffgentest_LDADD) $(LIBS)
-
-ph5diff$(EXEEXT): $(ph5diff_OBJECTS) $(ph5diff_DEPENDENCIES) $(EXTRA_ph5diff_DEPENDENCIES) 
-	@rm -f ph5diff$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(ph5diff_OBJECTS) $(ph5diff_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_main.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diffgentest.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ph5diff_main.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-h5diffgentest.log: h5diffgentest$(EXEEXT)
-	@p='h5diffgentest$(EXEEXT)'; \
-	b='h5diffgentest'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
-	clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-generic clean-libtool cscopelist-am ctags ctags-am \
-	distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tools/h5diff/h5diffgentest.c b/tools/h5diff/h5diffgentest.c
index a871709..8f92660 100644
--- a/tools/h5diff/h5diffgentest.c
+++ b/tools/h5diff/h5diffgentest.c
@@ -1014,14 +1014,14 @@ int test_attributes(const char *file,
 static int test_attributes_verbose_level(const char *fname1, const char *fname2)
 {
     herr_t  status = SUCCEED;
-    hid_t   fid1, fid2;
-    hid_t   f1_gid, f2_gid;
-    hid_t   f1_gid2, f2_gid2;
-    hid_t   f1_gid3, f2_gid3;
-    hid_t   f1_gid4, f2_gid4;
-    hid_t   f1_did, f2_did;
-    hid_t   f1_sid, f2_sid;
-    hid_t   f1_tid, f2_tid;
+    hid_t   fid1    = -1,   fid2 = -1;
+    hid_t   f1_gid  = -1,   f2_gid = -1;
+    hid_t   f1_gid2 = -1,   f2_gid2 = -1;
+    hid_t   f1_gid3 = -1,   f2_gid3 = -1;
+    hid_t   f1_gid4 = -1,   f2_gid4 = -1;
+    hid_t   f1_did  = -1,   f2_did = -1;
+    hid_t   f1_sid  = -1,   f2_sid = -1;
+    hid_t   f1_tid  = -1,   f2_tid = -1;
     /* dset */
     hsize_t dset_dims[1]={3};
     int dset_data[3] = {0,1,2};
@@ -1252,9 +1252,9 @@ out:
     /*-----------------------------------------------------------------------
     * Close
     *-----------------------------------------------------------------------*/
-    if(fid1)
+    if(fid1 > 0)
         H5Fclose(fid1);
-    if(fid2)
+    if(fid2 > 0)
         H5Fclose(fid2);
     if(f1_gid > 0)
         H5Gclose(f1_gid);
@@ -1276,13 +1276,13 @@ out:
         H5Dclose(f1_did);
     if(f2_did > 0)
         H5Dclose(f2_did);
-    if(f1_sid >0)
+    if(f1_sid > 0)
         H5Sclose(f1_sid);
-    if(f2_sid >0)
+    if(f2_sid > 0)
         H5Sclose(f2_sid);
-    if(f1_tid >0)
+    if(f1_tid > 0)
         H5Tclose(f1_tid);
-    if(f2_tid >0)
+    if(f2_tid > 0)
         H5Tclose(f2_tid);
 
     return status;
@@ -2797,15 +2797,18 @@ out:
 #define GRP_R_DSETNAME2 "dset2"
 static int test_group_recurse2(void)
 {
-    hid_t       fileid1;
-    hid_t       grp1=0, grp2;
-    hid_t       grp3=0;
-    hid_t       grp4=0;
-    hid_t       dset1, dset2;
-    hid_t       datatype, dataspace;   /* handles */
-    hid_t       fileid2;
-    hid_t       fileid3;
-    hid_t       fileid4;
+    hid_t       fileid1     = -1;
+    hid_t       grp1        = -1;
+    hid_t       grp2        = -1;
+    hid_t       grp3        = -1;
+    hid_t       grp4        = -1;
+    hid_t       dset1       = -1;
+    hid_t       dset2       = -1;
+    hid_t       datatype    = -1;
+    hid_t       dataspace   = -1;
+    hid_t       fileid2     = -1;
+    hid_t       fileid3     = -1;
+    hid_t       fileid4     = -1;
     hsize_t     dimsf[2];              /* dataset dimensions */
     herr_t      status=0;
     int data1[4][2] = {{0,0},{1,1},{2,2},{3,3}};
@@ -3098,12 +3101,18 @@ out:
     /*
      * Close/release resources.
      */
-    H5Sclose(dataspace);
-    H5Tclose(datatype);
-    H5Fclose(fileid1);
-    H5Fclose(fileid2);
-    H5Fclose(fileid3);
-    H5Fclose(fileid4);
+    if(dataspace > 0)
+        H5Sclose(dataspace);
+    if(datatype > 0)
+        H5Tclose(datatype);
+    if(fileid1 > 0)
+        H5Fclose(fileid1);
+    if(fileid2 > 0)
+        H5Fclose(fileid2);
+    if(fileid3 > 0)
+        H5Fclose(fileid3);
+    if(fileid4 > 0)
+        H5Fclose(fileid4);
 
     return status;
 }
@@ -3506,8 +3515,8 @@ static int test_comp_vlen_strings(const char *fname1, const char *grp_name, int
 {
     int i;
 
-    hid_t    fid1;      /* file id */
-    hid_t    gid;
+    hid_t    fid1   = -1;      /* file id */
+    hid_t    gid    = -1;
 
     /* compound1 datatype */
     typedef struct comp1_t
@@ -4153,60 +4162,60 @@ out:
    /*-----------------------------------------------------------------------
     * Close
     *-----------------------------------------------------------------------*/
-    if(fid1)
+    if(fid1 > 0)
         H5Fclose(fid1);
-    if(gid)
+    if(gid > 0)
         H5Gclose(gid);
     /* vlen string */
-    if(tid_vlen_str)
+    if(tid_vlen_str > 0)
         H5Tclose(tid_vlen_str);
-    if(sid_vlen_str)
+    if(sid_vlen_str > 0)
         H5Sclose(sid_vlen_str);
     /* fixed len string */
-    if(tid_fixlen_str)
+    if(tid_fixlen_str > 0)
         H5Tclose(tid_fixlen_str);
-    if(sid_fixlen_str)
+    if(sid_fixlen_str > 0)
         H5Sclose(sid_fixlen_str);
     /* vlen string array */
-    if(tid_vlen_str_array_pre)
+    if(tid_vlen_str_array_pre > 0)
         H5Tclose(tid_vlen_str_array_pre);
-    if(tid_vlen_str_array)
+    if(tid_vlen_str_array > 0)
         H5Tclose(tid_vlen_str_array);
-    if(sid_vlen_str_array)
+    if(sid_vlen_str_array > 0)
         H5Sclose(sid_vlen_str_array);
     /* fixed len string array */
-    if(tid_fixlen_str_array_pre)
+    if(tid_fixlen_str_array_pre > 0)
         H5Tclose(tid_fixlen_str_array_pre);
-    if(tid_fixlen_str_array)
+    if(tid_fixlen_str_array > 0)
         H5Tclose(tid_fixlen_str_array);
-    if(sid_fixlen_str_array)
+    if(sid_fixlen_str_array > 0)
         H5Sclose(sid_fixlen_str_array);
     /* compound */
-    if(tid1_comp)
+    if(tid1_comp > 0)
         H5Tclose(tid1_comp);
-    if(tid2_comp)
+    if(tid2_comp > 0)
         H5Tclose(tid2_comp);
-    if(tid3_comp)
+    if(tid3_comp > 0)
         H5Tclose(tid3_comp);
-    if(tid4_comp)
+    if(tid4_comp > 0)
         H5Tclose(tid4_comp);
-    if(tid5_comp)
+    if(tid5_comp > 0)
         H5Tclose(tid5_comp);
-    if(tid6_comp)
+    if(tid6_comp > 0)
         H5Tclose(tid6_comp);
-    if(tid7_comp)
+    if(tid7_comp > 0)
         H5Tclose(tid7_comp);
-    if(tid8_comp)
+    if(tid8_comp > 0)
         H5Tclose(tid8_comp);
-    if(tid9_comp)
+    if(tid9_comp > 0)
         H5Tclose(tid9_comp);
-    if(did_comp)
+    if(did_comp > 0)
         H5Dclose(did_comp);
-    if(sid_comp)
+    if(sid_comp > 0)
         H5Sclose(sid_comp);
 
     return status;
-}
+} /* end test_comp_vlen_strings() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in
index 8c54492..540af74 100644
--- a/tools/h5dump/Makefile.in
+++ b/tools/h5dump/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -32,7 +32,17 @@
 #
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -95,22 +105,20 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/testh5dump.sh.in $(srcdir)/testh5dumppbits.sh.in \
-	$(srcdir)/testh5dumpvds.sh.in $(srcdir)/testh5dumpxml.sh.in \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
 check_PROGRAMS = $(am__EXEEXT_1) binread$(EXEEXT)
 bin_PROGRAMS = h5dump$(EXEEXT)
 TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
 subdir = tools/h5dump
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/H5config.h \
 	$(top_builddir)/fortran/src/H5config_f.inc
 CONFIG_CLEAN_FILES = testh5dump.sh testh5dumppbits.sh testh5dumpvds.sh \
@@ -401,6 +409,11 @@ am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
 TEST_LOGS = $(am__test_logs2:.sh.log=.log)
 SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
 SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/testh5dump.sh.in \
+	$(srcdir)/testh5dumppbits.sh.in $(srcdir)/testh5dumpvds.sh.in \
+	$(srcdir)/testh5dumpxml.sh.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
@@ -420,7 +433,6 @@ AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
 AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -518,6 +530,7 @@ LL_PATH = @LL_PATH@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_STATIC_EXEC = @LT_STATIC_EXEC@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -743,7 +756,6 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5dump/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign tools/h5dump/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -752,7 +764,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
@@ -962,7 +974,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	if test -n "$$am__remaking_logs"; then \
 	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 	       "recursion detected" >&2; \
-	else \
+	elif test -n "$$redo_logs"; then \
 	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 	fi; \
 	if $(am__make_dryrun); then :; else \
@@ -1246,6 +1258,8 @@ uninstall-am: uninstall-binPROGRAMS
 	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
 	uninstall-binPROGRAMS
 
+.PRECIOUS: Makefile
+
 
 # List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
 # This tells the Makefiles that these targets are not files to be built but
diff --git a/tools/h5dump/errfiles/tall-1.err b/tools/h5dump/errfiles/tall-1.err
index ba691d0..ab9dbe3 100644
--- a/tools/h5dump/errfiles/tall-1.err
+++ b/tools/h5dump/errfiles/tall-1.err
@@ -1,9 +1,9 @@
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
diff --git a/tools/h5dump/errfiles/tall-2A.err b/tools/h5dump/errfiles/tall-2A.err
index ba691d0..ab9dbe3 100644
--- a/tools/h5dump/errfiles/tall-2A.err
+++ b/tools/h5dump/errfiles/tall-2A.err
@@ -1,9 +1,9 @@
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
diff --git a/tools/h5dump/errfiles/tall-2A0.err b/tools/h5dump/errfiles/tall-2A0.err
index ba691d0..ab9dbe3 100644
--- a/tools/h5dump/errfiles/tall-2A0.err
+++ b/tools/h5dump/errfiles/tall-2A0.err
@@ -1,9 +1,9 @@
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
diff --git a/tools/h5dump/errfiles/tall-2B.err b/tools/h5dump/errfiles/tall-2B.err
index ba691d0..ab9dbe3 100644
--- a/tools/h5dump/errfiles/tall-2B.err
+++ b/tools/h5dump/errfiles/tall-2B.err
@@ -1,9 +1,9 @@
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
diff --git a/tools/h5dump/errfiles/textlink.err b/tools/h5dump/errfiles/textlink.err
index 03c0550..95556db 100644
--- a/tools/h5dump/errfiles/textlink.err
+++ b/tools/h5dump/errfiles/textlink.err
@@ -1,9 +1,9 @@
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -25,10 +25,10 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     minor: Unable to open file
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
diff --git a/tools/h5dump/errfiles/textlinkfar.err b/tools/h5dump/errfiles/textlinkfar.err
index 969e17c..5aa7f87 100644
--- a/tools/h5dump/errfiles/textlinkfar.err
+++ b/tools/h5dump/errfiles/textlinkfar.err
@@ -1,9 +1,9 @@
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -24,7 +24,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #008: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #009: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -67,7 +67,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #006: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #007: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -88,7 +88,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #013: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #014: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -109,7 +109,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #020: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #021: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -130,7 +130,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #027: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #028: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -164,7 +164,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #006: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #007: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -185,7 +185,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #013: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #014: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -206,7 +206,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #020: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #021: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -227,7 +227,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #027: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #028: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
diff --git a/tools/h5dump/errfiles/textlinksrc.err b/tools/h5dump/errfiles/textlinksrc.err
index 969e17c..5aa7f87 100644
--- a/tools/h5dump/errfiles/textlinksrc.err
+++ b/tools/h5dump/errfiles/textlinksrc.err
@@ -1,9 +1,9 @@
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -24,7 +24,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #008: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #009: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -67,7 +67,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #006: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #007: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -88,7 +88,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #013: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #014: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -109,7 +109,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #020: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #021: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -130,7 +130,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #027: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #028: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -164,7 +164,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #006: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #007: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -185,7 +185,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #013: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #014: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -206,7 +206,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #020: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #021: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
@@ -227,7 +227,7 @@ HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
     major: Symbol table
     minor: Can't open object
   #027: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #028: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
diff --git a/tools/h5dump/errfiles/torderlinks1.err b/tools/h5dump/errfiles/torderlinks1.err
index 780c7e6..e665f03 100644
--- a/tools/h5dump/errfiles/torderlinks1.err
+++ b/tools/h5dump/errfiles/torderlinks1.err
@@ -1,9 +1,9 @@
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
diff --git a/tools/h5dump/errfiles/torderlinks2.err b/tools/h5dump/errfiles/torderlinks2.err
index 780c7e6..e665f03 100644
--- a/tools/h5dump/errfiles/torderlinks2.err
+++ b/tools/h5dump/errfiles/torderlinks2.err
@@ -1,9 +1,9 @@
 HDF5-DIAG: Error detected in HDF5 (version (number)) thread (IDs):
   #000: (file name) line (number) in H5Oopen(): unable to open object
-    major: Symbol table
+    major: Object header
     minor: Can't open object
   #001: (file name) line (number) in H5O_open_name(): object not found
-    major: Symbol table
+    major: Object header
     minor: Object not found
   #002: (file name) line (number) in H5G_loc_find(): can't find object
     major: Symbol table
diff --git a/tools/h5dump/h5dump_ddl.c b/tools/h5dump/h5dump_ddl.c
index 0cd0847..fd50710 100644
--- a/tools/h5dump/h5dump_ddl.c
+++ b/tools/h5dump/h5dump_ddl.c
@@ -1518,10 +1518,10 @@ handle_paths(hid_t fid, const char *path_name, void H5_ATTR_UNUSED * data, int H
 void
 handle_attributes(hid_t fid, const char *attr, void H5_ATTR_UNUSED * data, int H5_ATTR_UNUSED pe, const char H5_ATTR_UNUSED *display_name)
 {
-    hid_t  oid = -1;
-    hid_t  attr_id = -1;
-    char *obj_name;
-    char *attr_name;
+    hid_t  oid          = -1;
+    hid_t  attr_id      = -1;
+    char *obj_name      = NULL;
+    char *attr_name     = NULL;
     int j;
     h5tools_str_t buffer;          /* string into which to render   */
     h5tools_context_t ctx;            /* print context  */
@@ -1898,8 +1898,9 @@ handle_links(hid_t fid, const char *links, void H5_ATTR_UNUSED * data, int H5_AT
             begin_obj(h5tools_dump_header_format->softlinkbegin, links, h5tools_dump_header_format->softlinkblockbegin);
             PRINTVALSTREAM(rawoutstream, "\n");
             indentation(COL);
-            if(H5Lget_val(fid, links, buf, linfo.u.val_size, H5P_DEFAULT) >= 0)
+            if(H5Lget_val(fid, links, buf, linfo.u.val_size, H5P_DEFAULT) >= 0) {
                 PRINTSTREAM(rawoutstream, "LINKTARGET \"%s\"\n", buf);
+            }
             else {
                 error_msg("h5dump error: unable to get link value for \"%s\"\n", links);
                 h5tools_setstatus(EXIT_FAILURE);
@@ -1941,7 +1942,7 @@ handle_links(hid_t fid, const char *links, void H5_ATTR_UNUSED * data, int H5_AT
         case H5L_TYPE_MAX:
             HDassert(0);
             /* fall through */
-        H5L_TYPE_HARD:
+        case H5L_TYPE_HARD:
         default:
             begin_obj(h5tools_dump_header_format->udlinkbegin, links, h5tools_dump_header_format->udlinkblockbegin);
             PRINTVALSTREAM(rawoutstream, "\n");
diff --git a/tools/h5dump/h5dump_ddl.h b/tools/h5dump/h5dump_ddl.h
index 6cd9181..2b3f61e 100644
--- a/tools/h5dump/h5dump_ddl.h
+++ b/tools/h5dump/h5dump_ddl.h
@@ -34,6 +34,10 @@ void      dump_fcontents(hid_t fid);
 /* callback function used by H5Aiterate2() */
 herr_t    dump_attr_cb(hid_t loc_id, const char *attr_name, const H5A_info_t *info, void *_op_data);
 
+/* other iteration functions */
+void link_iteration(hid_t gid, unsigned crt_order_flags);
+void attr_iteration(hid_t gid, unsigned attr_crt_order_flags);
+
 void handle_paths(hid_t fid, const char *path_name, void *data, int pe, const char *display_name);
 void handle_datasets(hid_t fid, const char *dset, void *data, int pe, const char *display_name);
 void handle_attributes(hid_t fid, const char *attr, void H5_ATTR_UNUSED * data, int H5_ATTR_UNUSED pe, const char H5_ATTR_UNUSED *display_name);
diff --git a/tools/h5dump/h5dump_defines.h b/tools/h5dump/h5dump_defines.h
index 5f2df43..2be2dcc 100644
--- a/tools/h5dump/h5dump_defines.h
+++ b/tools/h5dump/h5dump_defines.h
@@ -23,23 +23,25 @@
 #define COL             3
 
 /* Macros for displaying objects */
-#define begin_obj(obj,name,begin)                               \
-    do {              \
-        if ((name))                                             \
+#define begin_obj(obj,name,begin)                                           \
+    do {                                                                    \
+        if ((name)) {                                                       \
             PRINTSTREAM(rawoutstream, "%s \"%s\" %s", (obj), (name), (begin));   \
-        else                                                    \
-            PRINTSTREAM(rawoutstream, "%s %s", (obj), (begin));      \
+        }                                                                   \
+        else {                                                              \
+            PRINTSTREAM(rawoutstream, "%s %s", (obj), (begin));             \
+        }                                                                   \
     } while(0);
 
-#define end_obj(obj,end)                                        \
-    do {              \
-        if(HDstrlen(end)) {                                     \
-            PRINTSTREAM(rawoutstream, "%s", end);                                  \
-            if(HDstrlen(obj))                                   \
-                PRINTVALSTREAM(rawoutstream, " ");                                    \
-        }                                                       \
-        if(HDstrlen(obj))                                       \
-            PRINTSTREAM(rawoutstream, "%s", obj);                                  \
+#define end_obj(obj,end)                                                    \
+    do {                                                                    \
+        if(HDstrlen(end)) {                                                 \
+            PRINTSTREAM(rawoutstream, "%s", end);                           \
+            if(HDstrlen(obj))                                               \
+                PRINTVALSTREAM(rawoutstream, " ");                          \
+        }                                                                   \
+        if(HDstrlen(obj))                                                   \
+            PRINTSTREAM(rawoutstream, "%s", obj);                           \
     } while(0);
 
 
diff --git a/tools/h5dump/h5dump_xml.c b/tools/h5dump/h5dump_xml.c
index e872114..5bc43eb 100644
--- a/tools/h5dump/h5dump_xml.c
+++ b/tools/h5dump/h5dump_xml.c
@@ -2968,9 +2968,9 @@ static int
 xml_print_refs(hid_t did, int source)
 {
     herr_t      e;
-    hid_t       type;
-    hid_t       space;
-    hssize_t    ssiz;
+    hid_t       type    = -1;
+    hid_t       space   = -1;
+    hssize_t    ssiz    = -1;
     hsize_t     i;
     size_t      tsiz;
     hobj_ref_t *refbuf = NULL;
@@ -3125,11 +3125,11 @@ static int
 xml_print_strs(hid_t did, int source)
 {
     herr_t      e;
-    hid_t       type;
-    hid_t       space;
-    hssize_t    ssiz;
+    hid_t       type    = -1;
+    hid_t       space   = -1;
+    hssize_t    ssiz    = -1;
     htri_t      is_vlstr = FALSE;
-    size_t      tsiz;
+    size_t      tsiz    = 0;
     size_t      i;
     size_t      str_size = 0;
     char       *bp = NULL;
diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in
deleted file mode 100644
index 938f3d9..0000000
--- a/tools/h5import/Makefile.in
+++ /dev/null
@@ -1,1432 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Makefile(.in)
-#
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/h5importtestutil.sh.in $(top_srcdir)/bin/depcomp \
-	$(top_srcdir)/bin/test-driver
-check_PROGRAMS = $(am__EXEEXT_1)
-bin_PROGRAMS = h5import$(EXEEXT)
-TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
-subdir = tools/h5import
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = h5importtestutil.sh
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-am__EXEEXT_1 = h5importtest$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-h5import_SOURCES = h5import.c
-h5import_OBJECTS = h5import.$(OBJEXT)
-h5import_LDADD = $(LDADD)
-h5import_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-h5import_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h5import_LDFLAGS) $(LDFLAGS) -o $@
-h5importtest_SOURCES = h5importtest.c
-h5importtest_OBJECTS = h5importtest.$(OBJEXT)
-h5importtest_LDADD = $(LDADD)
-h5importtest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = h5import.c h5importtest.c
-DIST_SOURCES = h5import.c h5importtest.c
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src and tools/lib directories
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/tools/lib
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files from h5importtest
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.bin
-
-# Test programs and scripts
-TEST_PROG = h5importtest
-TEST_SCRIPT = h5importtestutil.sh
-check_SCRIPT = h5importtestutil.sh
-SCRIPT_DEPEND = h5import$(EXEEXT)
-
-# Add h5import specific linker flags here
-h5import_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-
-# All programs depend on the main hdf5 library and the tools library
-LDADD = $(LIBH5TOOLS) $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5import/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign tools/h5import/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-h5importtestutil.sh: $(top_builddir)/config.status $(srcdir)/h5importtestutil.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
-	 || test -f $$p1 \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' \
-	    -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
-	`; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-h5import$(EXEEXT): $(h5import_OBJECTS) $(h5import_DEPENDENCIES) $(EXTRA_h5import_DEPENDENCIES) 
-	@rm -f h5import$(EXEEXT)
-	$(AM_V_CCLD)$(h5import_LINK) $(h5import_OBJECTS) $(h5import_LDADD) $(LIBS)
-
-h5importtest$(EXEEXT): $(h5importtest_OBJECTS) $(h5importtest_DEPENDENCIES) $(EXTRA_h5importtest_DEPENDENCIES) 
-	@rm -f h5importtest$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(h5importtest_OBJECTS) $(h5importtest_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5import.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5importtest.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-h5importtest.log: h5importtest$(EXEEXT)
-	@p='h5importtest$(EXEEXT)'; \
-	b='h5importtest'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
-	clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-generic clean-libtool cscopelist-am ctags ctags-am \
-	distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tools/h5import/h5import.c b/tools/h5import/h5import.c
index 96fb6f9..9617df3 100644
--- a/tools/h5import/h5import.c
+++ b/tools/h5import/h5import.c
@@ -265,7 +265,7 @@ err:
 static int gtoken(char *s)
 {
     size_t      len;
-    int         token;
+    int         token = ERR;
 
     const char *err1 = "Illegal argument: %s.\n";
 
@@ -995,16 +995,16 @@ out:
  */
 static int processStrHDFData(FILE *strm, struct Input *in, hid_t file_id)
 {
-    hid_t   group_id;
-    hid_t   dset_id;
-    hid_t   space_id;
-    hid_t   mspace_id;
-    hid_t   type_id;
-    hid_t   handle;
-    char   *str1 = NULL;
-    char   *str2 = NULL;
-    char   *str3 = NULL;
-    char    str[1024] = "";
+    hid_t   group_id    = -1;
+    hid_t   dset_id     = -1;
+    hid_t   space_id    = -1;
+    hid_t   mspace_id   = -1;
+    hid_t   type_id     = -1;
+    hid_t   handle      = -1;
+    char   *str1        = NULL;
+    char   *str2        = NULL;
+    char   *str3        = NULL;
+    char    str[1024]   = "";
     int     j;
     hsize_t     line;
 
diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in
deleted file mode 100644
index 9452a9b..0000000
--- a/tools/h5jam/Makefile.in
+++ /dev/null
@@ -1,1454 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Makefile(.in)
-#
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/testh5jam.sh.in $(top_srcdir)/bin/depcomp \
-	$(top_srcdir)/bin/test-driver
-bin_PROGRAMS = h5jam$(EXEEXT) h5unjam$(EXEEXT)
-check_PROGRAMS = tellub$(EXEEXT) h5jamgentest$(EXEEXT) getub$(EXEEXT)
-TESTS = $(TEST_SCRIPT)
-subdir = tools/h5jam
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = testh5jam.sh
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-PROGRAMS = $(bin_PROGRAMS)
-getub_SOURCES = getub.c
-getub_OBJECTS = getub.$(OBJEXT)
-getub_LDADD = $(LDADD)
-getub_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-h5jam_SOURCES = h5jam.c
-h5jam_OBJECTS = h5jam.$(OBJEXT)
-h5jam_LDADD = $(LDADD)
-h5jam_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-h5jam_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h5jam_LDFLAGS) $(LDFLAGS) -o $@
-h5jamgentest_SOURCES = h5jamgentest.c
-h5jamgentest_OBJECTS = h5jamgentest.$(OBJEXT)
-h5jamgentest_LDADD = $(LDADD)
-h5jamgentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-h5unjam_SOURCES = h5unjam.c
-h5unjam_OBJECTS = h5unjam.$(OBJEXT)
-h5unjam_LDADD = $(LDADD)
-h5unjam_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-h5unjam_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h5unjam_LDFLAGS) $(LDFLAGS) -o $@
-tellub_SOURCES = tellub.c
-tellub_OBJECTS = tellub.$(OBJEXT)
-tellub_LDADD = $(LDADD)
-tellub_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = getub.c h5jam.c h5jamgentest.c h5unjam.c tellub.c
-DIST_SOURCES = getub.c h5jam.c h5jamgentest.c h5unjam.c tellub.c
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src and tools/lib directories
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/tools/lib
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files.  *.h5 are generated by jamgentest.  They should
-# copied to the testfiles/ directory if update is required.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 \
-	testfiles/h5jam-*-sav testfiles/h5unjam-*-sav
-TEST_SCRIPT = testh5jam.sh
-
-# Add h5jam and h5unjam specific linker flags here
-h5jam_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-h5unjam_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-check_SCRIPTS = $(TEST_SCRIPT)
-SCRIPT_DEPEND = h5jam$(EXEEXT) h5unjam$(EXEEXT)
-
-# Link against the main HDF5 library and tools library
-LDADD = $(LIBH5TOOLS) $(LIBHDF5)
-DISTCLEANFILES = testh5jam.sh
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5jam/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign tools/h5jam/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-testh5jam.sh: $(top_builddir)/config.status $(srcdir)/testh5jam.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
-	 || test -f $$p1 \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' \
-	    -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
-	`; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-getub$(EXEEXT): $(getub_OBJECTS) $(getub_DEPENDENCIES) $(EXTRA_getub_DEPENDENCIES) 
-	@rm -f getub$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(getub_OBJECTS) $(getub_LDADD) $(LIBS)
-
-h5jam$(EXEEXT): $(h5jam_OBJECTS) $(h5jam_DEPENDENCIES) $(EXTRA_h5jam_DEPENDENCIES) 
-	@rm -f h5jam$(EXEEXT)
-	$(AM_V_CCLD)$(h5jam_LINK) $(h5jam_OBJECTS) $(h5jam_LDADD) $(LIBS)
-
-h5jamgentest$(EXEEXT): $(h5jamgentest_OBJECTS) $(h5jamgentest_DEPENDENCIES) $(EXTRA_h5jamgentest_DEPENDENCIES) 
-	@rm -f h5jamgentest$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(h5jamgentest_OBJECTS) $(h5jamgentest_LDADD) $(LIBS)
-
-h5unjam$(EXEEXT): $(h5unjam_OBJECTS) $(h5unjam_DEPENDENCIES) $(EXTRA_h5unjam_DEPENDENCIES) 
-	@rm -f h5unjam$(EXEEXT)
-	$(AM_V_CCLD)$(h5unjam_LINK) $(h5unjam_OBJECTS) $(h5unjam_LDADD) $(LIBS)
-
-tellub$(EXEEXT): $(tellub_OBJECTS) $(tellub_DEPENDENCIES) $(EXTRA_tellub_DEPENDENCIES) 
-	@rm -f tellub$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(tellub_OBJECTS) $(tellub_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getub.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5jam.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5jamgentest.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5unjam.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tellub.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
-	clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-generic clean-libtool cscopelist-am ctags ctags-am \
-	distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tools/h5jam/h5jamgentest.c b/tools/h5jam/h5jamgentest.c
index ef45372..d3166b5 100644
--- a/tools/h5jam/h5jamgentest.c
+++ b/tools/h5jam/h5jamgentest.c
@@ -89,12 +89,6 @@ typedef struct s1_t {
 } s1_t;
 
 
-/* 1-D array datatype */
-#define ARRAY1_RANK 1
-
-/* 2-D array datatype */
-#define ARRAY3_DIM2 3
-
 /* A UD link traversal function.  Shouldn't actually be called. */
 static hid_t UD_traverse(const char H5_ATTR_UNUSED * link_name, hid_t H5_ATTR_UNUSED cur_group,
     const void H5_ATTR_UNUSED * udata, size_t H5_ATTR_UNUSED udata_size, hid_t H5_ATTR_UNUSED lapl_id)
diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in
index 68c87b5..cfb169c 100644
--- a/tools/h5ls/Makefile.in
+++ b/tools/h5ls/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -32,7 +32,17 @@
 #
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -95,20 +105,19 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/testh5ls.sh.in $(srcdir)/testh5lsvds.sh.in \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
 bin_PROGRAMS = h5ls$(EXEEXT)
 TESTS = $(TEST_SCRIPT)
 subdir = tools/h5ls
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/H5config.h \
 	$(top_builddir)/fortran/src/H5config_f.inc
 CONFIG_CLEAN_FILES = testh5ls.sh testh5lsvds.sh
@@ -386,6 +395,10 @@ am__set_b = \
     *) \
       b='$*';; \
   esac
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/testh5ls.sh.in \
+	$(srcdir)/testh5lsvds.sh.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
@@ -405,7 +418,6 @@ AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
 AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -503,6 +515,7 @@ LL_PATH = @LL_PATH@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_STATIC_EXEC = @LT_STATIC_EXEC@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -720,7 +733,6 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5ls/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign tools/h5ls/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -729,7 +741,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
@@ -914,7 +926,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	if test -n "$$am__remaking_logs"; then \
 	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 	       "recursion detected" >&2; \
-	else \
+	elif test -n "$$redo_logs"; then \
 	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 	fi; \
 	if $(am__make_dryrun); then :; else \
@@ -1188,6 +1200,8 @@ uninstall-am: uninstall-binPROGRAMS
 	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
 	uninstall uninstall-am uninstall-binPROGRAMS
 
+.PRECIOUS: Makefile
+
 
 # List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
 # This tells the Makefiles that these targets are not files to be built but
diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in
deleted file mode 100644
index 02be99d..0000000
--- a/tools/h5repack/Makefile.in
+++ /dev/null
@@ -1,1548 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Makefile(.in)
-#
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/h5repack.sh.in $(srcdir)/h5repack_plugin.sh.in \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
-noinst_PROGRAMS = testh5repack_detect_szip$(EXEEXT)
-@HAVE_SHARED_CONDITIONAL_TRUE@@USE_PLUGINS_CONDITIONAL_TRUE@am__append_1 = h5repack_plugin.sh
-check_PROGRAMS = $(am__EXEEXT_1)
-bin_PROGRAMS = h5repack$(EXEEXT)
-TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
-subdir = tools/h5repack
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = h5repack.sh h5repack_plugin.sh
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libdynlibadd_la_LIBADD =
-am__libdynlibadd_la_SOURCES_DIST = dynlib_rpk.c
-@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibadd_la_OBJECTS =  \
-@HAVE_SHARED_CONDITIONAL_TRUE@	dynlib_rpk.lo
-libdynlibadd_la_OBJECTS = $(am_libdynlibadd_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibadd_la_rpath = -rpath \
-@HAVE_SHARED_CONDITIONAL_TRUE@	$(libdir)
-am__EXEEXT_1 = h5repacktst$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
-am__objects_1 = h5repack.$(OBJEXT) h5repack_copy.$(OBJEXT) \
-	h5repack_filters.$(OBJEXT) h5repack_opttable.$(OBJEXT) \
-	h5repack_parse.$(OBJEXT) h5repack_refs.$(OBJEXT) \
-	h5repack_verify.$(OBJEXT)
-am_h5repack_OBJECTS = $(am__objects_1) h5repack_main.$(OBJEXT)
-h5repack_OBJECTS = $(am_h5repack_OBJECTS)
-h5repack_LDADD = $(LDADD)
-h5repack_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-h5repack_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h5repack_LDFLAGS) $(LDFLAGS) -o $@
-am_h5repacktst_OBJECTS = $(am__objects_1) h5repacktst.$(OBJEXT)
-h5repacktst_OBJECTS = $(am_h5repacktst_OBJECTS)
-h5repacktst_LDADD = $(LDADD)
-h5repacktst_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-am_testh5repack_detect_szip_OBJECTS =  \
-	testh5repack_detect_szip.$(OBJEXT)
-testh5repack_detect_szip_OBJECTS =  \
-	$(am_testh5repack_detect_szip_OBJECTS)
-testh5repack_detect_szip_LDADD = $(LDADD)
-testh5repack_detect_szip_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) \
-	$(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = $(libdynlibadd_la_SOURCES) $(h5repack_SOURCES) \
-	$(h5repacktst_SOURCES) $(testh5repack_detect_szip_SOURCES)
-DIST_SOURCES = $(am__libdynlibadd_la_SOURCES_DIST) $(h5repack_SOURCES) \
-	$(h5repacktst_SOURCES) $(testh5repack_detect_szip_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src, test, and tools/lib directories
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/test -I$(top_srcdir)/tools/lib
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files.  *.h5 are generated by h5repack.  They should
-# copied to the testfiles/ directory if update is required.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.bin \
-	testfiles/h5diff_attr1.h5 testfiles/tfamily*.h5
-
-# Test programs and scripts
-TEST_SCRIPT = h5repack.sh $(am__append_1)
-TEST_PROG = h5repacktst
-SCRIPT_DEPEND = h5repack$(EXEEXT)
-check_SCRIPTS = $(TEST_SCRIPT)
-
-# Add h5repack specific linker flags here
-h5repack_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-
-# Depend on the hdf5 library, the tools library, the test library
-LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-
-# Source files
-COMMON_SOURCES = h5repack.c h5repack_copy.c h5repack_filters.c \
-               h5repack_opttable.c h5repack_parse.c h5repack_refs.c \
-               h5repack_verify.c
-
-h5repack_SOURCES = $(COMMON_SOURCES) h5repack_main.c
-h5repacktst_SOURCES = $(COMMON_SOURCES) h5repacktst.c 
-testh5repack_detect_szip_SOURCES = testh5repack_detect_szip.c
-@HAVE_SHARED_CONDITIONAL_TRUE@lib_LTLIBRARIES = libdynlibadd.la
-@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibadd_la_SOURCES = dynlib_rpk.c
-DISTCLEANFILES = h5repack.sh h5repack_plugin.sh
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5repack/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign tools/h5repack/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-h5repack.sh: $(top_builddir)/config.status $(srcdir)/h5repack.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-h5repack_plugin.sh: $(top_builddir)/config.status $(srcdir)/h5repack_plugin.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-	}
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	test -z "$$locs" || { \
-	  echo rm -f $${locs}; \
-	  rm -f $${locs}; \
-	}
-
-libdynlibadd.la: $(libdynlibadd_la_OBJECTS) $(libdynlibadd_la_DEPENDENCIES) $(EXTRA_libdynlibadd_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(LINK) $(am_libdynlibadd_la_rpath) $(libdynlibadd_la_OBJECTS) $(libdynlibadd_la_LIBADD) $(LIBS)
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
-	 || test -f $$p1 \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' \
-	    -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
-	`; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-h5repack$(EXEEXT): $(h5repack_OBJECTS) $(h5repack_DEPENDENCIES) $(EXTRA_h5repack_DEPENDENCIES) 
-	@rm -f h5repack$(EXEEXT)
-	$(AM_V_CCLD)$(h5repack_LINK) $(h5repack_OBJECTS) $(h5repack_LDADD) $(LIBS)
-
-h5repacktst$(EXEEXT): $(h5repacktst_OBJECTS) $(h5repacktst_DEPENDENCIES) $(EXTRA_h5repacktst_DEPENDENCIES) 
-	@rm -f h5repacktst$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(h5repacktst_OBJECTS) $(h5repacktst_LDADD) $(LIBS)
-
-testh5repack_detect_szip$(EXEEXT): $(testh5repack_detect_szip_OBJECTS) $(testh5repack_detect_szip_DEPENDENCIES) $(EXTRA_testh5repack_detect_szip_DEPENDENCIES) 
-	@rm -f testh5repack_detect_szip$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(testh5repack_detect_szip_OBJECTS) $(testh5repack_detect_szip_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dynlib_rpk.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_copy.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_filters.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_main.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_opttable.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_parse.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_refs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_verify.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repacktst.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testh5repack_detect_szip.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-h5repacktst.log: h5repacktst$(EXEEXT)
-	@p='h5repacktst$(EXEEXT)'; \
-	b='h5repacktst'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
-install-binPROGRAMS: install-libLTLIBRARIES
-
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-@HAVE_SHARED_CONDITIONAL_FALSE@install-exec-hook:
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
-	clean-libLTLIBRARIES clean-libtool clean-noinstPROGRAMS \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-libLTLIBRARIES
-
-.MAKE: check-am install-am install-exec-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-generic clean-libLTLIBRARIES clean-libtool \
-	clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-binPROGRAMS install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-exec-hook install-html install-html-am \
-	install-info install-info-am install-libLTLIBRARIES \
-	install-man install-pdf install-pdf-am install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
-	recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS uninstall-libLTLIBRARIES
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# The h5repack.sh script needs h5repacktst to run first.
-h5repack.sh.chkexe_: h5repacktst.chkexe_
-
-@HAVE_SHARED_CONDITIONAL_TRUE@  # Build it as shared library if configure is enabled for shared library.
-
-@HAVE_SHARED_CONDITIONAL_TRUE@install-exec-hook:
-@HAVE_SHARED_CONDITIONAL_TRUE@	$(RM) $(DESTDIR)$(libdir)/*dynlib*
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tools/h5repack/h5repack_verify.c b/tools/h5repack/h5repack_verify.c
index 42799f9..52423f1 100644
--- a/tools/h5repack/h5repack_verify.c
+++ b/tools/h5repack/h5repack_verify.c
@@ -51,17 +51,17 @@ static int verify_filters(hid_t pid, hid_t tid, int nfilters, filter_info_t *fil
 int
 h5repack_verify(const char *in_fname, const char *out_fname, pack_opt_t *options)
 {
-    hid_t        fidin;	 /* file ID for input file*/
-    hid_t        fidout; /* file ID for output file*/
-    hid_t        did;    /* dataset ID */
-    hid_t        pid;    /* dataset creation property list ID */
-    hid_t        sid;    /* space ID */
-    hid_t        tid;    /* type ID */
+    hid_t        fidin      = -1;	/* file ID for input file*/
+    hid_t        fidout     = -1;   /* file ID for output file*/
+    hid_t        did        = -1;   /* dataset ID */
+    hid_t        pid        = -1;   /* dataset creation property list ID */
+    hid_t        sid        = -1;   /* space ID */
+    hid_t        tid        = -1;   /* type ID */
     unsigned int i;
     trav_table_t *travt = NULL;
     int          ok = 1;
-    hid_t       fcpl_in;  /* file creation property for input file */
-    hid_t   	fcpl_out; /* file creation property for output file */
+    hid_t       fcpl_in     = -1;   /* file creation property for input file */
+    hid_t   	fcpl_out    = -1;   /* file creation property for output file */
     H5F_file_space_type_t in_strat, out_strat;	/* file space handling strategy for in/output file */
     hsize_t	in_thresh, out_thresh;		/* free space section threshold for in/output file */
 
diff --git a/tools/h5repack/h5repacktst.c b/tools/h5repack/h5repacktst.c
index 46d895c..3959300 100644
--- a/tools/h5repack/h5repacktst.c
+++ b/tools/h5repack/h5repacktst.c
@@ -1547,10 +1547,8 @@ int main (void)
     {
         hid_t       fapl;
 
-        /* setup */
-        h5_reset();
         fapl = h5_fileaccess();
-        h5_cleanup(H5REPACK_FILENAMES, fapl);
+        h5_clean_files(H5REPACK_FILENAMES, fapl);
 
     }
 
diff --git a/tools/h5stat/Makefile.in b/tools/h5stat/Makefile.in
deleted file mode 100644
index e0d095d..0000000
--- a/tools/h5stat/Makefile.in
+++ /dev/null
@@ -1,1482 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Makefile(.in)
-#
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/testh5stat.sh.in $(top_srcdir)/bin/depcomp \
-	$(top_srcdir)/bin/test-driver
-check_PROGRAMS = $(am__EXEEXT_1)
-bin_PROGRAMS = h5stat$(EXEEXT)
-TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
-subdir = tools/h5stat
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES = testh5stat.sh
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
-am__EXEEXT_1 = h5stat_gentest$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-h5stat_SOURCES = h5stat.c
-h5stat_OBJECTS = h5stat.$(OBJEXT)
-h5stat_LDADD = $(LDADD)
-h5stat_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-h5stat_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h5stat_LDFLAGS) $(LDFLAGS) -o $@
-h5stat_gentest_SOURCES = h5stat_gentest.c
-h5stat_gentest_OBJECTS = h5stat_gentest.$(OBJEXT)
-h5stat_gentest_LDADD = $(LDADD)
-h5stat_gentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-SCRIPTS = $(bin_SCRIPTS)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = h5stat.c h5stat_gentest.c
-DIST_SOURCES = h5stat.c h5stat_gentest.c
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include src directory
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/tools/lib
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-
-# Temporary files.  *.h5 are generated by h5repart_gentest.  They should
-# copied to the testfiles/ directory if update is required. fst_family*.h5
-# and scd_family*.h5 were created by setting the HDF5_NOCLEANUP variable.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 \
-	../testfiles/fst_family*.h5 ../testfiles/scd_family*.h5
-
-#test script and program
-TEST_PROG = h5stat_gentest
-TEST_SCRIPT = testh5stat.sh
-check_SCRIPTS = $(TEST_SCRIPT)
-SCRIPT_DEPEND = h5stat$(EXEEXT)
-bin_SCRIPTS = 
-
-# Add h5stat specific linker flags here
-h5stat_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-
-# Tell automake to clean h5redeploy script
-CLEANFILES = 
-
-# These were generated by configure.  Remove them only when distclean.
-DISTCLEANFILES = testh5stat.sh
-
-# All programs rely on hdf5 library and h5tools library
-LDADD = $(LIBH5TOOLS) $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5stat/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign tools/h5stat/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-testh5stat.sh: $(top_builddir)/config.status $(srcdir)/testh5stat.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
-	 || test -f $$p1 \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' \
-	    -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
-	`; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-h5stat$(EXEEXT): $(h5stat_OBJECTS) $(h5stat_DEPENDENCIES) $(EXTRA_h5stat_DEPENDENCIES) 
-	@rm -f h5stat$(EXEEXT)
-	$(AM_V_CCLD)$(h5stat_LINK) $(h5stat_OBJECTS) $(h5stat_LDADD) $(LIBS)
-
-h5stat_gentest$(EXEEXT): $(h5stat_gentest_OBJECTS) $(h5stat_gentest_DEPENDENCIES) $(EXTRA_h5stat_gentest_DEPENDENCIES) 
-	@rm -f h5stat_gentest$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(h5stat_gentest_OBJECTS) $(h5stat_gentest_LDADD) $(LIBS)
-install-binSCRIPTS: $(bin_SCRIPTS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n' \
-	    -e 'h;s|.*|.|' \
-	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
-	      if (++n[d] == $(am__install_max)) { \
-		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
-	    else { print "f", d "/" $$4, $$1 } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	     test -z "$$files" || { \
-	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	     } \
-	; done
-
-uninstall-binSCRIPTS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	       sed -e 's,.*/,,;$(transform)'`; \
-	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5stat.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5stat_gentest.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-h5stat_gentest.log: h5stat_gentest$(EXEEXT)
-	@p='h5stat_gentest$(EXEEXT)'; \
-	b='h5stat_gentest'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) $(SCRIPTS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
-	clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS install-binSCRIPTS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-generic clean-libtool cscopelist-am ctags ctags-am \
-	distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-binSCRIPTS install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
-	uninstall uninstall-am uninstall-binPROGRAMS \
-	uninstall-binSCRIPTS
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tools/h5stat/h5stat_gentest.c b/tools/h5stat/h5stat_gentest.c
index 5ad73f7..100f5b2 100644
--- a/tools/h5stat/h5stat_gentest.c
+++ b/tools/h5stat/h5stat_gentest.c
@@ -48,14 +48,14 @@
 static void 
 gen_newgrat_file(const char *fname)
 {
-    hid_t fcpl; 	/* File creation property */
-    hid_t fapl; 	/* File access property */
-    hid_t fid;		/* File id */
-    hid_t gid;		/* Group id */
-    hid_t tid;		/* Datatype id */
-    hid_t sid; 		/* Dataspace id */
-    hid_t attr_id; 	/* Attribute id */
-    hid_t did;		/* Dataset id */
+    hid_t fcpl          = -1;   /* File creation property */
+    hid_t fapl          = -1;   /* File access property */
+    hid_t fid           = -1;   /* File id */
+    hid_t gid           = -1;   /* Group id */
+    hid_t tid           = -1;   /* Datatype id */
+    hid_t sid           = -1;   /* Dataspace id */
+    hid_t attr_id       = -1;   /* Attribute id */
+    hid_t did           = -1;   /* Dataset id */
     char name[30];	/* Group name */
     char attrname[30];	/* Attribute name */
     int  i;		/* Local index variable */
diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in
deleted file mode 100644
index ba26950..0000000
--- a/tools/lib/Makefile.in
+++ /dev/null
@@ -1,1377 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Makefile(.in)
-#
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
-check_PROGRAMS = $(am__EXEEXT_1)
-TESTS = $(am__EXEEXT_1)
-subdir = tools/lib
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-libh5tools_la_LIBADD =
-am_libh5tools_la_OBJECTS = h5tools.lo h5tools_dump.lo h5tools_str.lo \
-	h5tools_utils.lo h5diff.lo h5diff_array.lo h5diff_attr.lo \
-	h5diff_dset.lo h5diff_util.lo h5trav.lo h5tools_filters.lo \
-	h5tools_ref.lo h5tools_type.lo io_timer.lo
-libh5tools_la_OBJECTS = $(am_libh5tools_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-am__EXEEXT_1 =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = $(libh5tools_la_SOURCES)
-DIST_SOURCES = $(libh5tools_la_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-
-# Include files in /src directory
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# This is our main target, the h5tools library.
-noinst_LTLIBRARIES = libh5tools.la
-libh5tools_la_SOURCES = h5tools.c h5tools_dump.c h5tools_str.c h5tools_utils.c h5diff.c \
-    h5diff_array.c h5diff_attr.c h5diff_dset.c h5diff_util.c h5trav.c  \
-    h5tools_filters.c h5tools_ref.c h5tools_type.c io_timer.c
-
-
-# Test program.  Link using libhdf5 and libh5tools
-TEST_PROG = 
-
-# Name libh5tools.la so that dependencies work out. Automake knows how
-# to build 'libh5tools.la', but not '../../tools/lib/libh5tools.la'.
-LDADD = libh5tools.la $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/lib/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign tools/lib/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-	@list='$(noinst_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	test -z "$$locs" || { \
-	  echo rm -f $${locs}; \
-	  rm -f $${locs}; \
-	}
-
-libh5tools.la: $(libh5tools_la_OBJECTS) $(libh5tools_la_DEPENDENCIES) $(EXTRA_libh5tools_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(LINK)  $(libh5tools_la_OBJECTS) $(libh5tools_la_LIBADD) $(LIBS)
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_array.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_attr.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_dset.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_util.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_dump.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_filters.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_ref.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_str.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_type.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_utils.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5trav.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/io_timer.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(LTLIBRARIES) all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
-	clean-noinstLTLIBRARIES mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
-	clean-noinstLTLIBRARIES cscopelist-am ctags ctags-am distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
-	uninstall uninstall-am
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tools/lib/h5diff.c b/tools/lib/h5diff.c
index badaf3c..46dcf6f 100644
--- a/tools/lib/h5diff.c
+++ b/tools/lib/h5diff.c
@@ -594,8 +594,8 @@ hsize_t h5diff(const char *fname1,
     trav_info_t  *info1_grp = NULL;
     trav_info_t  *info2_grp = NULL;
     /* local pointer */
-    trav_info_t  *info1_lp;
-    trav_info_t  *info2_lp;
+    trav_info_t  *info1_lp = NULL;
+    trav_info_t  *info2_lp = NULL;
     /* link info from specified object */
     H5L_info_t src_linfo1;
     H5L_info_t src_linfo2;
diff --git a/tools/lib/h5tools.c b/tools/lib/h5tools.c
index 274b398..19d71bb 100644
--- a/tools/lib/h5tools.c
+++ b/tools/lib/h5tools.c
@@ -1641,8 +1641,8 @@ render_bin_output_region_blocks(hid_t region_space, hid_t region_id,
     hsize_t      alloc_size;
     hsize_t     *ptdata;
     int          ndims;
-    hid_t        dtype;
-    hid_t        type_id;
+    hid_t        dtype = -1;
+    hid_t        type_id = -1;
 
     if((snblocks = H5Sget_select_hyper_nblocks(region_space)) <= 0)
         H5E_THROW(FALSE, H5E_tools_min_id_g, "H5Sget_select_hyper_nblocks failed");
@@ -1672,10 +1672,10 @@ render_bin_output_region_blocks(hid_t region_space, hid_t region_id,
  done:
     HDfree(ptdata);
 
-    if(H5Tclose(type_id) < 0)
+    if(type_id > 0 && H5Tclose(type_id) < 0)
         HERROR(H5E_tools_g, H5E_tools_min_id_g, "H5Tclose failed");
 
-    if(H5Tclose(dtype) < 0)
+    if(dtype > 0 && H5Tclose(dtype) < 0)
         HERROR(H5E_tools_g, H5E_tools_min_id_g, "H5Tclose failed");
 
     H5_LEAVE(TRUE)
@@ -1765,8 +1765,8 @@ render_bin_output_region_points(hid_t region_space, hid_t region_id,
     HERR_INIT(hbool_t, TRUE)
     hssize_t npoints;
     int      ndims;
-    hid_t    dtype;
-    hid_t    type_id;
+    hid_t    dtype = -1;
+    hid_t    type_id = -1;
 
     if((npoints = H5Sget_select_elem_npoints(region_space)) <= 0)
         H5E_THROW(FALSE, H5E_tools_min_id_g, "H5Sget_select_elem_npoints failed");
@@ -1785,10 +1785,10 @@ render_bin_output_region_points(hid_t region_space, hid_t region_id,
             stream, container, ndims, type_id, npoints);
 
  done:
-    if(H5Tclose(type_id) < 0)
+    if(type_id > 0 && H5Tclose(type_id) < 0)
         HERROR(H5E_tools_g, H5E_tools_min_id_g, "H5Tclose failed");
 
-    if(H5Tclose(dtype) < 0)
+    if(dtype > 0 && H5Tclose(dtype) < 0)
         HERROR(H5E_tools_g, H5E_tools_min_id_g, "H5Tclose failed");
 
     H5_LEAVE(ret_value)
diff --git a/tools/lib/h5tools.h b/tools/lib/h5tools.h
index 6512f9b..d2e3ea6 100644
--- a/tools/lib/h5tools.h
+++ b/tools/lib/h5tools.h
@@ -593,8 +593,12 @@ H5TOOLS_DLL void    h5tools_region_simple_prefix(FILE *stream, const h5tool_form
                             h5tools_context_t *ctx, hsize_t elmtno, hsize_t *ptdata, int secnum);
 
 H5TOOLS_DLL int     render_bin_output(FILE *stream, hid_t container, hid_t tid, void *_mem, hsize_t nelmts);
+H5TOOLS_DLL int     render_bin_output_region_data_blocks(hid_t region_id, FILE *stream,
+                            hid_t container, int ndims, hid_t type_id, hssize_t nblocks, hsize_t *ptdata);
 H5TOOLS_DLL hbool_t render_bin_output_region_blocks(hid_t region_space, hid_t region_id,
                              FILE *stream, hid_t container);
+H5TOOLS_DLL int     render_bin_output_region_data_points(hid_t region_space, hid_t region_id,
+                            FILE* stream, hid_t container, int ndims, hid_t type_id, hssize_t npoints);
 H5TOOLS_DLL hbool_t render_bin_output_region_points(hid_t region_space, hid_t region_id,
                              FILE *stream, hid_t container);
 
diff --git a/tools/lib/h5tools_dump.c b/tools/lib/h5tools_dump.c
index 2afe3e4..7928dfb 100644
--- a/tools/lib/h5tools_dump.c
+++ b/tools/lib/h5tools_dump.c
@@ -943,8 +943,8 @@ h5tools_dump_region_data_points(hid_t region_space, hid_t region_id,
     hsize_t *ptdata;
     int      ndims;
     hssize_t indx;
-    hid_t    dtype;
-    hid_t    type_id;
+    hid_t    dtype = -1;
+    hid_t    type_id = -1;
 
     HDassert(info);
     HDassert(ctx);
@@ -1065,10 +1065,10 @@ h5tools_dump_region_data_points(hid_t region_space, hid_t region_id,
  done:
     HDfree(ptdata);
 
-    if(H5Tclose(type_id) < 0)
+    if(type_id > 0 && H5Tclose(type_id) < 0)
         HERROR(H5E_tools_g, H5E_tools_min_id_g, "H5Tclose failed");
 
-    if(H5Tclose(dtype) < 0)
+    if(dtype > 0 && H5Tclose(dtype) < 0)
         HERROR(H5E_tools_g, H5E_tools_min_id_g, "H5Tclose failed");
 
     ctx->need_prefix = TRUE;
diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in
index 2dac1d4..4db831a 100644
--- a/tools/misc/Makefile.in
+++ b/tools/misc/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -33,7 +33,17 @@
 
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -96,22 +106,20 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(srcdir)/h5cc.in $(srcdir)/testh5mkgrp.sh.in \
-	$(srcdir)/testh5repart.sh.in $(top_srcdir)/bin/depcomp \
-	$(top_srcdir)/bin/test-driver
 check_PROGRAMS = $(am__EXEEXT_1) repart_test$(EXEEXT)
 bin_PROGRAMS = h5debug$(EXEEXT) h5repart$(EXEEXT) h5mkgrp$(EXEEXT)
 TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
 subdir = tools/misc
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/H5config.h \
 	$(top_builddir)/fortran/src/H5config_f.inc
 CONFIG_CLEAN_FILES = h5cc testh5mkgrp.sh testh5repart.sh
@@ -437,6 +445,11 @@ TEST_LOGS = $(am__test_logs2:.sh.log=.log)
 SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
 SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/h5cc.in \
+	$(srcdir)/testh5mkgrp.sh.in $(srcdir)/testh5repart.sh.in \
+	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 am__relativize = \
   dir0=`pwd`; \
@@ -481,7 +494,6 @@ AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
 AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -579,6 +591,7 @@ LL_PATH = @LL_PATH@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_STATIC_EXEC = @LT_STATIC_EXEC@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -817,7 +830,6 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/misc/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign tools/misc/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -826,7 +838,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
@@ -1129,7 +1141,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	if test -n "$$am__remaking_logs"; then \
 	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 	       "recursion detected" >&2; \
-	else \
+	elif test -n "$$redo_logs"; then \
 	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 	fi; \
 	if $(am__make_dryrun); then :; else \
@@ -1450,6 +1462,8 @@ uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
 	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
 	uninstall-binPROGRAMS uninstall-binSCRIPTS uninstall-local
 
+.PRECIOUS: Makefile
+
 
 # List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
 # This tells the Makefiles that these targets are not files to be built but
diff --git a/tools/misc/h5debug.c b/tools/misc/h5debug.c
index 3789723..480450d 100644
--- a/tools/misc/h5debug.c
+++ b/tools/misc/h5debug.c
@@ -23,19 +23,19 @@
  *
  *-------------------------------------------------------------------------
  */
-#define H5A_PACKAGE     /*suppress error about including H5Apkg  */
-#define H5B2_PACKAGE    /*suppress error about including H5B2pkg */
-#define H5B2_TESTING    /*suppress warning about H5B2 testing funcs*/
-#define H5D_PACKAGE     /*suppress error about including H5Dpkg  */
-#define H5EA_PACKAGE    /*suppress error about including H5EApkg */
-#define H5EA_TESTING    /*suppress warning about H5EA testing funcs*/
-#define H5FA_PACKAGE    /*suppress error about including H5FApkg */
-#define H5FA_TESTING    /*suppress warning about H5FA testing funcs*/
-#define H5F_PACKAGE     /*suppress error about including H5Fpkg  */
-#define H5G_PACKAGE     /*suppress error about including H5Gpkg  */
-#define H5HF_PACKAGE    /*suppress error about including H5HFpkg */
-#define H5O_PACKAGE     /*suppress error about including H5Opkg  */
-#define H5SM_PACKAGE    /*suppress error about including H5SMpkg */
+#define H5A_FRIEND		/*suppress error about including H5Apkg  */
+#define H5B2_FRIEND		/*suppress error about including H5B2pkg */
+#define H5B2_TESTING		/*suppress warning about H5B2 testing funcs*/
+#define H5D_FRIEND		/*suppress error about including H5Dpkg  */
+#define H5EA_FRIEND		/*suppress error about including H5EApkg */
+#define H5EA_TESTING		/*suppress warning about H5EA testing funcs*/
+#define H5FA_FRIEND		/*suppress error about including H5FApkg */
+#define H5FA_TESTING		/*suppress warning about H5FA testing funcs*/
+#define H5F_FRIEND		/*suppress error about including H5Fpkg  */
+#define H5G_FRIEND		/*suppress error about including H5Gpkg  */
+#define H5HF_FRIEND		/*suppress error about including H5HFpkg */
+#define H5O_FRIEND		/*suppress error about including H5Opkg  */
+#define H5SM_FRIEND		/*suppress error about including H5SMpkg */
 
 #include "H5private.h"  /* Generic Functions    */
 #include "H5Apkg.h"     /* Attributes           */
diff --git a/tools/misc/talign.c b/tools/misc/talign.c
index 2d0a9d1..7eb4c50 100644
--- a/tools/misc/talign.c
+++ b/tools/misc/talign.c
@@ -37,11 +37,11 @@ const char *setname = "align";
 
 int main(void)
 {
-    hid_t fil,spc,set;
-    hid_t cs6, cmp, fix;
-    hid_t cmp1, cmp2, cmp3;
-    hid_t plist;
-    hid_t array_dt;
+    hid_t fil=-1, spc=-1, set=-1;
+    hid_t cs6=-1, cmp=-1, fix=-1;
+    hid_t cmp1=-1, cmp2=-1, cmp3=-1;
+    hid_t plist=-1;
+    hid_t array_dt=-1;
 
     hsize_t dim[2];
     hsize_t cdim[4];
@@ -137,6 +137,7 @@ int main(void)
 
     H5Dread(set, fix, spc, H5S_ALL, H5P_DEFAULT, data);
     fptr = (float *)(data + H5Tget_member_offset(fix, 1));
+    H5Dclose(set);
 
 out:
     if(error < 0) {
@@ -194,7 +195,9 @@ out:
     if(data)
         HDfree(data);
     H5Sclose(spc);
+    H5Tclose(cs6);
     H5Tclose(cmp);
+    H5Tclose(fix);
     H5Tclose(cmp1);
     H5Tclose(cmp2);
     H5Tclose(cmp3);
diff --git a/tools/misc/vds/Makefile.in b/tools/misc/vds/Makefile.in
index 8977925..e44f611 100644
--- a/tools/misc/vds/Makefile.in
+++ b/tools/misc/vds/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -31,7 +31,17 @@
 # HDF5 Library Makefile(.in)
 #
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -94,19 +104,19 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
 check_PROGRAMS = $(am__EXEEXT_1)
 TESTS = $(am__EXEEXT_1)
 subdir = tools/misc/vds
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/H5config.h \
 	$(top_builddir)/fortran/src/H5config_f.inc
 CONFIG_CLEAN_FILES =
@@ -402,6 +412,9 @@ am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
 TEST_LOGS = $(am__test_logs2:.sh.log=.log)
 SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
 SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
@@ -421,7 +434,6 @@ AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
 AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -519,6 +531,7 @@ LL_PATH = @LL_PATH@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_STATIC_EXEC = @LT_STATIC_EXEC@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -735,7 +748,6 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/misc/vds/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign tools/misc/vds/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -744,7 +756,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
@@ -905,7 +917,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	if test -n "$$am__remaking_logs"; then \
 	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 	       "recursion detected" >&2; \
-	else \
+	elif test -n "$$redo_logs"; then \
 	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 	fi; \
 	if $(am__make_dryrun); then :; else \
@@ -1211,6 +1223,8 @@ uninstall-am:
 	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
 	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 # List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
 # This tells the Makefiles that these targets are not files to be built but
diff --git a/tools/perform/Makefile.in b/tools/perform/Makefile.in
deleted file mode 100644
index dbac43e..0000000
--- a/tools/perform/Makefile.in
+++ /dev/null
@@ -1,1549 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# HDF5 Library Performance Makefile(.in)
-#
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/config/commence.am \
-	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
-	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \
-	COPYING
-@BUILD_PARALLEL_CONDITIONAL_FALSE@bin_PROGRAMS =  \
-@BUILD_PARALLEL_CONDITIONAL_FALSE@	h5perf_serial$(EXEEXT)
-@BUILD_PARALLEL_CONDITIONAL_TRUE@bin_PROGRAMS =  \
-@BUILD_PARALLEL_CONDITIONAL_TRUE@	h5perf_serial$(EXEEXT) \
-@BUILD_PARALLEL_CONDITIONAL_TRUE@	h5perf$(EXEEXT)
-check_PROGRAMS = iopipe$(EXEEXT) chunk$(EXEEXT) overhead$(EXEEXT) \
-	zip_perf$(EXEEXT) perf_meta$(EXEEXT) $(am__EXEEXT_2) \
-	perf$(EXEEXT)
-TESTS = $(am__EXEEXT_3)
-subdir = tools/perform
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
-	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h \
-	$(top_builddir)/fortran/src/H5config_f.inc
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-am__EXEEXT_1 =
-@BUILD_ALL_CONDITIONAL_TRUE@am__EXEEXT_2 = $(am__EXEEXT_1)
-PROGRAMS = $(bin_PROGRAMS)
-chunk_SOURCES = chunk.c
-chunk_OBJECTS = chunk.$(OBJEXT)
-chunk_LDADD = $(LDADD)
-chunk_DEPENDENCIES = $(LIBHDF5)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-am_h5perf_OBJECTS = pio_perf.$(OBJEXT) pio_engine.$(OBJEXT)
-h5perf_OBJECTS = $(am_h5perf_OBJECTS)
-h5perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-h5perf_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h5perf_LDFLAGS) $(LDFLAGS) -o $@
-am_h5perf_serial_OBJECTS = sio_perf.$(OBJEXT) sio_engine.$(OBJEXT)
-h5perf_serial_OBJECTS = $(am_h5perf_serial_OBJECTS)
-h5perf_serial_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-h5perf_serial_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(h5perf_serial_LDFLAGS) $(LDFLAGS) -o $@
-iopipe_SOURCES = iopipe.c
-iopipe_OBJECTS = iopipe.$(OBJEXT)
-iopipe_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-overhead_SOURCES = overhead.c
-overhead_OBJECTS = overhead.$(OBJEXT)
-overhead_LDADD = $(LDADD)
-overhead_DEPENDENCIES = $(LIBHDF5)
-perf_SOURCES = perf.c
-perf_OBJECTS = perf.$(OBJEXT)
-perf_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-perf_meta_SOURCES = perf_meta.c
-perf_meta_OBJECTS = perf_meta.$(OBJEXT)
-perf_meta_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
-zip_perf_SOURCES = zip_perf.c
-zip_perf_OBJECTS = zip_perf.$(OBJEXT)
-zip_perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
-depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = chunk.c $(h5perf_SOURCES) $(h5perf_serial_SOURCES) iopipe.c \
-	overhead.c perf.c perf_meta.c zip_perf.c
-DIST_SOURCES = chunk.c $(h5perf_SOURCES) $(h5perf_serial_SOURCES) \
-	iopipe.c overhead.c perf.c perf_meta.c zip_perf.c
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-am__EXEEXT_3 = iopipe$(EXEEXT) chunk$(EXEEXT) overhead$(EXEEXT) \
-	zip_perf$(EXEEXT) perf_meta$(EXEEXT) h5perf_serial$(EXEEXT) \
-	$(am__EXEEXT_2)
-TEST_SUITE_LOG = test-suite.log
-LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.sh.log=.log)
-SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
-SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMTAR = @AMTAR@
-
-# H5_CFLAGS holds flags that should be used when building hdf5,
-# but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
-# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
-# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
-AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
-AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-	-I$(top_srcdir)/test -I$(top_srcdir)/tools/lib
-AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
-AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CLEARFILEBUF = @CLEARFILEBUF@
-CODESTACK = @CODESTACK@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_VERSION = @CXX_VERSION@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
-DIRECT_VFD = @DIRECT_VFD@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCFLAGS_f90 = @FCFLAGS_f90@
-FCLIBS = @FCLIBS@
-FC_VERSION = @FC_VERSION@
-FGREP = @FGREP@
-FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
-FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
-FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
-GREP = @GREP@
-H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
-H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
-H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
-H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
-H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
-H5_CFLAGS = @H5_CFLAGS@
-H5_CPPFLAGS = @H5_CPPFLAGS@
-H5_CXXFLAGS = @H5_CXXFLAGS@
-H5_FCFLAGS = @H5_FCFLAGS@
-H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
-H5_LDFLAGS = @H5_LDFLAGS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HAVE_DMALLOC = @HAVE_DMALLOC@
-HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
-HAVE_PTHREAD = @HAVE_PTHREAD@
-HDF5_HL = @HDF5_HL@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HDF_CXX = @HDF_CXX@
-HDF_FORTRAN = @HDF_FORTRAN@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT = @INSTRUMENT@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LL_PATH = @LL_PATH@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MPE = @MPE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
-PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
-PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
-PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
-PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
-PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
-PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
-PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
-PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
-PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
-PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
-PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE_T = @SIZE_T@
-STATIC_EXEC = @STATIC_EXEC@
-STATIC_SHARED = @STATIC_SHARED@
-STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-THREADSAFE = @THREADSAFE@
-TIME = @TIME@
-TR = @TR@
-TRACE_API = @TRACE_API@
-UNAME_INFO = @UNAME_INFO@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-USINGMEMCHECKER = @USINGMEMCHECKER@
-VERSION = @VERSION@
-WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_FC = @ac_ct_FC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Install directories that automake doesn't know about
-docdir = $(exec_prefix)/doc
-dvidir = @dvidir@
-enable_shared = @enable_shared@
-enable_static = @enable_static@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNEXEC instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNEXEC = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
-
-# Scripts used to build examples
-# If only shared libraries have been installed, have h5cc build examples with
-# shared libraries instead of static libraries
-H5CC = ${DESTDIR}$(bindir)/h5cc
-H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
-H5FC = ${DESTDIR}$(bindir)/h5fc
-H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
-H5CPP = ${DESTDIR}$(bindir)/h5c++
-ACLOCAL_AMFLAGS = "-I m4"
-
-# The trace script; this is used on source files from the C library to
-# insert tracing macros.
-TRACE = perl $(top_srcdir)/bin/trace
-
-# .chkexe files are used to mark tests that have run successfully.
-# .chklog files are output from those tests.
-# *.clog and *.clog2 are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
-
-# Add h5perf and h5perf_serial specific linker flags here
-h5perf_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-h5perf_serial_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
-
-# Some programs are not built or run by default, but can be built by hand or by
-# specifying --enable-build-all at configure time.
-# Also, some of these programs should only be built in parallel.
-# Currently there is no such program.
-@BUILD_PARALLEL_CONDITIONAL_TRUE@PARA_BUILD_ALL = 
-@BUILD_ALL_CONDITIONAL_TRUE@BUILD_ALL_PROGS = $(PARA_BUILD_ALL)
-
-# Define programs that will be run in 'make check'
-# List them in the order they should be run.
-# Parallel test programs.
-@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = h5perf perf
-# Serial test programs.
-TEST_PROG = iopipe chunk overhead zip_perf perf_meta h5perf_serial $(BUILD_ALL_PROGS)
-h5perf_SOURCES = pio_perf.c pio_engine.c
-h5perf_serial_SOURCES = sio_perf.c sio_engine.c
-
-# These are the files that `make clean' (and derivatives) will remove from
-# this directory.
-CLEANFILES = *.h5 *.raw *.dat x-gnuplot perftest.out
-
-# All of the programs depend on the main hdf5 library, and some of them
-# depend on test or tools library.
-LDADD = $(LIBHDF5)
-h5perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-h5perf_serial_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-perf_LDADD = $(LIBH5TEST) $(LIBHDF5)
-iopipe_LDADD = $(LIBH5TEST) $(LIBHDF5)
-zip_perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
-perf_meta_LDADD = $(LIBH5TEST) $(LIBHDF5)
-
-# Automake needs to be taught how to build lib, progs, and tests targets.
-# These will be filled in automatically for the most part (e.g.,
-# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
-# EXTRA_TEST variables are supplied to allow the user to force targets to
-# be built at certain times. 
-LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
-      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
-
-PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
-        $(EXTRA_PROG)
-
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TEST_EXTENSIONS = .sh
-SH_LOG_COMPILER = $(SHELL)
-AM_SH_LOG_FLAGS = 
-TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
-TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/perform/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign tools/perform/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
-	 || test -f $$p1 \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' \
-	    -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
-	`; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-
-chunk$(EXEEXT): $(chunk_OBJECTS) $(chunk_DEPENDENCIES) $(EXTRA_chunk_DEPENDENCIES) 
-	@rm -f chunk$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(chunk_OBJECTS) $(chunk_LDADD) $(LIBS)
-
-h5perf$(EXEEXT): $(h5perf_OBJECTS) $(h5perf_DEPENDENCIES) $(EXTRA_h5perf_DEPENDENCIES) 
-	@rm -f h5perf$(EXEEXT)
-	$(AM_V_CCLD)$(h5perf_LINK) $(h5perf_OBJECTS) $(h5perf_LDADD) $(LIBS)
-
-h5perf_serial$(EXEEXT): $(h5perf_serial_OBJECTS) $(h5perf_serial_DEPENDENCIES) $(EXTRA_h5perf_serial_DEPENDENCIES) 
-	@rm -f h5perf_serial$(EXEEXT)
-	$(AM_V_CCLD)$(h5perf_serial_LINK) $(h5perf_serial_OBJECTS) $(h5perf_serial_LDADD) $(LIBS)
-
-iopipe$(EXEEXT): $(iopipe_OBJECTS) $(iopipe_DEPENDENCIES) $(EXTRA_iopipe_DEPENDENCIES) 
-	@rm -f iopipe$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(iopipe_OBJECTS) $(iopipe_LDADD) $(LIBS)
-
-overhead$(EXEEXT): $(overhead_OBJECTS) $(overhead_DEPENDENCIES) $(EXTRA_overhead_DEPENDENCIES) 
-	@rm -f overhead$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(overhead_OBJECTS) $(overhead_LDADD) $(LIBS)
-
-perf$(EXEEXT): $(perf_OBJECTS) $(perf_DEPENDENCIES) $(EXTRA_perf_DEPENDENCIES) 
-	@rm -f perf$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(perf_OBJECTS) $(perf_LDADD) $(LIBS)
-
-perf_meta$(EXEEXT): $(perf_meta_OBJECTS) $(perf_meta_DEPENDENCIES) $(EXTRA_perf_meta_DEPENDENCIES) 
-	@rm -f perf_meta$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(perf_meta_OBJECTS) $(perf_meta_LDADD) $(LIBS)
-
-zip_perf$(EXEEXT): $(zip_perf_OBJECTS) $(zip_perf_DEPENDENCIES) $(EXTRA_zip_perf_DEPENDENCIES) 
-	@rm -f zip_perf$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(zip_perf_OBJECTS) $(zip_perf_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chunk.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iopipe.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/overhead.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/perf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/perf_meta.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pio_engine.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pio_perf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sio_engine.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sio_perf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zip_perf.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	else \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-recheck: all $(check_PROGRAMS)
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-iopipe.log: iopipe$(EXEEXT)
-	@p='iopipe$(EXEEXT)'; \
-	b='iopipe'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-chunk.log: chunk$(EXEEXT)
-	@p='chunk$(EXEEXT)'; \
-	b='chunk'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-overhead.log: overhead$(EXEEXT)
-	@p='overhead$(EXEEXT)'; \
-	b='overhead'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-zip_perf.log: zip_perf$(EXEEXT)
-	@p='zip_perf$(EXEEXT)'; \
-	b='zip_perf'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-perf_meta.log: perf_meta$(EXEEXT)
-	@p='perf_meta$(EXEEXT)'; \
-	b='perf_meta'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-h5perf_serial.log: h5perf_serial$(EXEEXT)
-	@p='h5perf_serial$(EXEEXT)'; \
-	b='h5perf_serial'; \
-	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-.sh.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(PROGRAMS) all-local
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
-	clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-local
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
-	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
-	clean-generic clean-libtool cscopelist-am ctags ctags-am \
-	distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
-	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
-	uninstall-binPROGRAMS
-
-
-# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
-# This tells the Makefiles that these targets are not files to be built but
-# commands that should be executed even if a file with the same name already
-# exists.
-.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
-        build-tests check-clean check-install check-p check-s check-vfd \
-        install-doc lib progs tests uninstall-doc _exec_check-s _test help
-
-help:
-	@$(top_srcdir)/bin/makehelp
-
-# lib/progs/tests targets recurse into subdirectories. build-* targets
-# build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(chk_TESTS)
-
-# General rule for recursive building targets.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., for Fortran type detection)
-lib progs tests check-s check-p :: $(BUILT_SOURCES)
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# General rule for recursive cleaning targets.  Like the rule above,
-# but doesn't require building BUILT_SOURCES.
-check-clean ::
-	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
-	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X && test $$d != .; then                           \
-	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
-	    fi;                                                               \
-	done
-
-# Tell Automake to build tests when the user types `make all' (this is
-# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
-# Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
-
-# make install-doc doesn't do anything outside of doc directory, but
-# Makefiles should recognize it.
-# UPDATE: docs no longer reside in this build tree, so this target
-# is depreciated.
-install-doc uninstall-doc:
-	@echo "Nothing to be done."
-
-# clean up files generated by tests so they can be re-run.
-build-check-clean:
-	$(RM) -rf $(CHECK_CLEANFILES)
-
-# run check-clean whenever mostlyclean is run
-mostlyclean-local: build-check-clean
-
-# check-install is just a synonym for installcheck
-check-install: installcheck
-
-# Run each test in order, passing $(TEST_FLAGS) to the program.
-# Since tests are done in a shell loop, "make -i" does apply inside it.
-# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
-# The timestamps give a rough idea how much time the tests use.
-#
-# Note that targets in chk_TESTS (defined above) will be built when the user
-# types 'make tests' or 'make check', but only programs in TEST_PROG,
-# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
-check-TESTS: test
-
-test _test:
-	@$(MAKE) build-check-s
-	@$(MAKE) build-check-p
-
-# Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
-	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
-	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
-
-# The dummy.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
-	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.chklog); \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
-	      else \
-	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
-	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $(@:.chkexe_=.chkexe) || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	fi
-
-# The dummysh.chkexe here prevents the target from being
-# empty if there are no tests in the current directory.
-# $${log} is the log file.
-# $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
-	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
-	   cmd=$(@:.chkexe_=);\
-	   tname=`basename $$cmd`;\
-	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
-	   log=`basename $(@:.chkexe_=.chklog)`; \
-	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
-	      echo "No need to test $${tname} again."; \
-	   else \
-	      echo "============================" > $${log}; \
-	      if test "X$(FORTRAN_API)" = "Xyes"; then \
-	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      elif test "X$(CXX_API)" = "Xyes"; then \
-	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      else \
-	         echo "Testing $${tname} $(TEST_FLAGS)"; \
-	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
-	      fi; \
-	      echo "============================" >> $${log}; \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)" \
-	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch $${chkname} || \
-	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	         (cat $${log} && false) || exit 1; \
-	      echo "" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
-	      echo "============================" >> $${log}; \
-	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
-	      cat $${log}; \
-	   fi; \
-	   echo "============================"; \
-	fi
-
-# Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
-	fi
-	@if test -n "$(TEST_PROG_PARA)"; then                                \
-	    echo "**** Hint ****";                                            \
-	    echo "Parallel test files reside in the current directory"        \
-	         "by default.";                                               \
-	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
-	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
-	    echo "    export HDF5_PARAPREFIX";                                \
-	    echo "    make check";                                            \
-	    echo "**** end of Hint ****";                                     \
-	fi
-	@for test in $(TEST_PROG_PARA) dummy; do                             \
-	   if test $$test != dummy; then                                      \
-	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
-	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
-	   fi;                                                                \
-	done
-	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
-	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
-	  fi;                                                                 \
-	done
-	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
-	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
-	fi
-
-# Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
-	@for vfd in $(VFD_LIST) dummy; do                                     \
-	    if test $$vfd != dummy; then                                      \
-	        echo "============================";                          \
-	        echo "Testing Virtual File Driver $$vfd";                     \
-	        echo "============================";                          \
-	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
-	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
-	    fi;                                                               \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tools/perform/perf_meta.c b/tools/perform/perf_meta.c
index b52871e..2c3a19c 100644
--- a/tools/perform/perf_meta.c
+++ b/tools/perform/perf_meta.c
@@ -821,7 +821,7 @@ main(int argc, char **argv)
     if (H5Sclose(space) < 0) goto error;
     if (H5Sclose(small_space) < 0) goto error;
 
-    h5_cleanup(FILENAME, fapl);
+    h5_clean_files(FILENAME, fapl);
 
 #ifdef H5_HAVE_PARALLEL
     if(facc_type == FACC_MPIO)
diff --git a/tools/perform/pio_perf.c b/tools/perform/pio_perf.c
index 4db2249..509513b 100644
--- a/tools/perform/pio_perf.c
+++ b/tools/perform/pio_perf.c
@@ -1673,60 +1673,8 @@ usage(const char *prog)
         printf("  HDF5_MPI_INFO    MPI INFO object key=value separated by ;\n");
         printf("  HDF5_PARAPREFIX  Paralllel data files prefix\n");
         fflush(stdout);
-    }
-}
-
-void debug_start_stop_time(io_time_t *pt, timer_type t, int start_stop)
-{
-#if 1
-        if (pio_debug_level >= 4) {
-            const char *msg;
-            int myrank;
-
-            MPI_Comm_rank(pio_comm_g, &myrank);
-
-            switch (t) {
-            case HDF5_FILE_OPENCLOSE:
-                msg = "File Open/Close";
-                break;
-            case HDF5_DATASET_CREATE:
-                msg = "Dataset Create";
-                break;
-            case HDF5_MPI_WRITE:
-                msg = "MPI Write";
-                break;
-            case HDF5_MPI_READ:
-                msg = "MPI Read";
-                break;
-            case HDF5_FINE_WRITE_FIXED_DIMS:
-                msg = "Fine Write";
-                break;
-            case HDF5_FINE_READ_FIXED_DIMS:
-                msg = "Fine Read";
-                break;
-            case HDF5_GROSS_WRITE_FIXED_DIMS:
-                msg = "Gross Write";
-                break;
-            case HDF5_GROSS_READ_FIXED_DIMS:
-                msg = "Gross Read";
-                break;
-            case HDF5_RAW_WRITE_FIXED_DIMS:
-                msg = "Raw Write";
-                break;
-            case HDF5_RAW_READ_FIXED_DIMS:
-                msg = "Raw Read";
-                break;
-            default:
-                msg = "Unknown Timer";
-                break;
-            }
-
-            fprintf(output, "    Proc %d: %s %s: %.2f\n", myrank, msg,
-                    (start_stop == TSTART ? "Start" : "Stop"),
-                    pt->total_time[t]);
-        }
-#endif
-} /* debug_start_stop_time */
+    } /* end if */
+} /* end usage() */
 
 #else /* H5_HAVE_PARALLEL */
 
@@ -1736,13 +1684,12 @@ void debug_start_stop_time(io_time_t *pt, timer_type t, int start_stop)
  *              parallel stuff.
  * Return:      EXIT_SUCCESS
  * Programmer:  Bill Wendling, 14. November 2001
- * Modifications:
  */
 int
 main(void)
 {
     printf("No parallel IO performance because parallel is not configured\n");
     return EXIT_SUCCESS;
-}
+} /* end main */
 
 #endif /* !H5_HAVE_PARALLEL */
diff --git a/tools/perform/sio_perf.c b/tools/perform/sio_perf.c
index 34d8552..a69e929 100644
--- a/tools/perform/sio_perf.c
+++ b/tools/perform/sio_perf.c
@@ -1405,56 +1405,5 @@ usage(const char *prog)
         printf("      HDF5_PREFIX      Data file prefix\n");
         printf("\n");
         fflush(stdout);
-}
-
-void debug_start_stop_time(io_time_t *pt, timer_type t, int start_stop)
-{
-        if (sio_debug_level >= 4) {
-            const char *msg;
-
-            switch (t) {
-            case HDF5_FILE_OPENCLOSE:
-                msg = "File Open/Close";
-                break;
-            case HDF5_DATASET_CREATE:
-                msg = "Dataset Create";
-                break;
-            case HDF5_MPI_WRITE:
-                msg = "MPI Write";
-                break;
-            case HDF5_MPI_READ:
-                msg = "MPI Read";
-                break;
-            case HDF5_FINE_WRITE_FIXED_DIMS:
-                msg = "Fine Write";
-                break;
-            case HDF5_FINE_READ_FIXED_DIMS:
-                msg = "Fine Read";
-                break;
-            case HDF5_GROSS_WRITE_FIXED_DIMS:
-                msg = "Gross Write";
-                break;
-            case HDF5_GROSS_READ_FIXED_DIMS:
-                msg = "Gross Read";
-                break;
-            case HDF5_RAW_WRITE_FIXED_DIMS:
-                msg = "Raw Write";
-                break;
-            case HDF5_RAW_READ_FIXED_DIMS:
-                msg = "Raw Read";
-                break;
-            case HDF5_FILE_READ_OPEN:
-            case HDF5_FILE_READ_CLOSE:
-            case HDF5_FILE_WRITE_OPEN:
-            case HDF5_FILE_WRITE_CLOSE:
-            default:
-                msg = "Unknown Timer";
-                break;
-            }
-
-            fprintf(output, "    %s %s: %.2f\n", msg,
-                    (start_stop == TSTART ? "Start" : "Stop"),
-                    pt->total_time[t]);
-        }
-} /* debug_start_stop_time */
+} /* end usage() */