summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRobb Matzke <matzke@llnl.gov>1998-08-05 22:23:51 (GMT)
committerRobb Matzke <matzke@llnl.gov>1998-08-05 22:23:51 (GMT)
commit32295ad53dd29e799cef007e05ca0368f0c1ca1d (patch)
treee041f9bffa6d839d4f3e13afcad4199deb486d3b
parent002b1494b79e2fd638a0676745c340a9a9e9d8e7 (diff)
downloadhdf5-32295ad53dd29e799cef007e05ca0368f0c1ca1d.zip
hdf5-32295ad53dd29e799cef007e05ca0368f0c1ca1d.tar.gz
hdf5-32295ad53dd29e799cef007e05ca0368f0c1ca1d.tar.bz2
[svn-r570] *** empty log message ***
-rw-r--r--doc/html/Compression.html409
-rw-r--r--doc/html/Filters.html463
-rw-r--r--src/H5public.h2
3 files changed, 464 insertions, 410 deletions
diff --git a/doc/html/Compression.html b/doc/html/Compression.html
deleted file mode 100644
index c3a2a45..0000000
--- a/doc/html/Compression.html
+++ /dev/null
@@ -1,409 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
-<html>
- <head>
- <title>Compression</title>
- </head>
-
- <body>
- <h1>Compression</h1>
-
- <h2>1. Introduction</h2>
-
- <p>HDF5 supports compression of raw data by compression methods
- built into the library or defined by an application. A
- compression method is associated with a dataset when the dataset
- is created and is applied independently to each storage chunk of
- the dataset.
-
- The dataset must use the <code>H5D_CHUNKED</code> storage
- layout. The library doesn't support compression for contiguous
- datasets because of the difficulty of implementing random access
- for partial I/O, and compact dataset compression is not
- supported because it wouldn't produce significant results.
-
- <h2>2. Supported Compression Methods</h2>
-
- <p>The library identifies compression methods with small
- integers, with values less than 16 reserved for use by NCSA and
- values between 16 and 255 (inclusive) available for general
- use. This range may be extended in the future if it proves to
- be too small.
-
- <p>
- <center>
- <table align=center width="80%">
- <tr>
- <th width="30%">Method Name</th>
- <th width="70%">Description</th>
- </tr>
-
- <tr valign=top>
- <td><code>H5Z_NONE</code></td>
- <td>The default is to not use compression. Specifying
- <code>H5Z_NONE</code> as the compression method results
- in better perfomance than writing a function that just
- copies data because the library's I/O pipeline
- recognizes this method and is able to short circuit
- parts of the pipeline.</td>
- </tr>
-
- <tr valign=top>
- <td><code>H5Z_DEFLATE</code></td>
- <td>The <em>deflate</em> method is the algorithm used by
- the GNU <code>gzip</code>program. It's a combination of
- a Huffman encoding followed by a 1977 Lempel-Ziv (LZ77)
- dictionary encoding. The aggressiveness of the
- compression can be controlled by passing an integer value
- to the compressor with <code>H5Pset_deflate()</code>
- (see below). In order for this compression method to be
- used, the HDF5 library must be configured and compiled
- in the presence of the GNU zlib version 1.1.2 or
- later.</td>
- </tr>
-
- <tr valign=top>
- <td><code>H5Z_RES_<em>N</em></code></td>
- <td>These compression methods (where <em>N</em> is in the
- range two through 15, inclusive) are reserved by NCSA
- for future use.</td>
- </tr>
-
- <tr valign=top>
- <td>Values of <em>N</em> between 16 and 255, inclusive</td>
- <td>These values can be used to represent application-defined
- compression methods. We recommend that methods under
- testing should be in the high range and when a method is
- about to be published it should be given a number near
- the low end of the range (or even below 16). Publishing
- the compression method and its numeric ID will make a
- file sharable.</td>
- </tr>
- </table>
- </center>
-
- <p>Setting the compression for a dataset to a method which was
- not compiled into the library and/or not registered by the
- application is allowed, but writing to such a dataset will
- silently <em>not</em> compress the data. Reading a compressed
- dataset for a method which is not available will result in
- errors (specifically, <code>H5Dread()</code> will return a
- negative value). The errors will be displayed in the
- compression statistics if the library was compiled with
- debugging turned on for the &quot;z&quot; package. See the
- section on diagnostics below for more details.
-
- <h2>3. Application-Defined Methods</h2>
-
- <p>Compression methods 16 through 255 can be defined by an
- application. As mentioned above, methods that have not been
- released should use high numbers in that range while methods
- that have been published will be assigned an official number in
- the low region of the range (possibly less than 16). Users
- should be aware that using unpublished compression methods
- results in unsharable files.
-
- <p>A compression method has two halves: one have handles
- compression and the other half handles uncompression. The
- halves are implemented as functions
- <code><em>method</em>_c</code> and
- <code><em>method</em>_u</code> respectively. One should not use
- the names <code>compress</code> or <code>uncompress</code> since
- they are likely to conflict with other compression libraries
- (like the GNU zlib).
-
- <p>Both the <code><em>method</em>_c</code> and
- <code><em>method</em>_u</code> functions take the same arguments
- and return the same values. They are defined with the type:
-
- <dl>
- <dt><code>typedef size_t (*H5Z_func_t)(unsigned int
- <em>flags</em>, size_t <em>cd_size</em>, const void
- *<em>client_data</em>, size_t <em>src_nbytes</em>, const
- void *<em>src</em>, size_t <em>dst_nbytes</em>, void
- *<em>dst</em>/*out*/)</code>
- <dd>The <em>flags</em> are an 8-bit vector which is stored in
- the file and which is defined when the compression method is
- defined. The <em>client_data</em> is a pointer to
- <em>cd_size</em> bytes of configuration data which is also
- stored in the file. The function compresses or uncompresses
- <em>src_nbytes</em> from the source buffer <em>src</em> into
- at most <em>dst_nbytes</em> of the result buffer <em>dst</em>.
- The function returns the number of bytes written to the result
- buffer or zero if an error occurs. But if a result buffer
- overrun occurs the function should return a value at least as
- large as <em>dst_size</em> (the uncompressor will see an
- overrun only for corrupt data).
- </dl>
-
- <p>The application associates the pair of functions with a name
- and a method number by calling <code>H5Zregister()</code>. This
- function can also be used to remove a compression method from
- the library by supplying null pointers for the functions.
-
- <dl>
- <dt><code>herr_t H5Zregister (H5Z_method_t <em>method</em>,
- const char *<em>name</em>, H5Z_func_t <em>method_c</em>,
- H5Z_func_t <em>method_u</em>)</code>
- <dd>The pair of functions to be used for compression
- (<em>method_c</em>) and uncompression (<em>method_u</em>) are
- associated with a short <em>name</em> used for debugging and a
- <em>method</em> number in the range 16 through 255. This
- function can be called as often as desired for a particular
- compression method with each call replacing the information
- stored by the previous call. Sometimes it's convenient to
- supply only one half of the compression, for instance in an
- application that opens files for read-only. Compression
- statistics for the method are accumulated across calls to this
- function.
- </dl>
-
- <p>
- <center>
- <table border align=center width="100%">
- <caption align=bottom><h4>Example: Registering an
- Application-Defined Compression Method</h4></caption>
- <tr>
- <td>
- <p>Here's a simple-minded &quot;compression&quot; method
- that just copies the input value to the output. It's
- similar to the <code>H5Z_NONE</code> method but
- slower. Compression and uncompression are performed
- by the same function.
-
- <p><code><pre>
-size_t
-bogus (unsigned int flags,
- size_t cd_size, const void *client_data,
- size_t src_nbytes, const void *src,
- size_t dst_nbytes, void *dst/*out*/)
-{
- memcpy (dst, src, src_nbytes);
- return src_nbytes;
-}
- </pre></code>
-
- <p>The function could be registered as method 250 as
- follows:
-
- <p><code><pre>
-#define H5Z_BOGUS 250
-H5Zregister (H5Z_BOGUS, "bogus", bogus, bogus);
- </pre></code>
-
- <p>The function can be unregistered by saying:
-
- <p><code><pre>
-H5Zregister (H5Z_BUGUS, "bogus", NULL, NULL);
- </pre></code>
-
- <p>Notice that we kept the name &quot;bogus&quot; even
- though we unregistered the functions that perform the
- compression and uncompression. This makes compression
- statistics more understandable when they're printed.
- </td>
- </tr>
- </table>
- </center>
-
- <h2>4. Enabling Compression for a Dataset</h2>
-
- <p>If a dataset is to be compressed then the compression
- information must be specified when the dataset is created since
- once a dataset is created compression parameters cannot be
- adjusted. The compression is specified through the dataset
- creation property list (see <code>H5Pcreate()</code>).
-
- <dl>
- <dt><code>herr_t H5Pset_deflate (hid_t <em>plist</em>, int
- <em>level</em>)</code>
- <dd>The compression method for dataset creation property list
- <em>plist</em> is set to <code>H5Z_DEFLATE</code> and the
- aggression level is set to <em>level</em>. The <em>level</em>
- must be a value between one and nine, inclusive, where one
- indicates no (but fast) compression and nine is aggressive
- compression.
-
- <br><br>
- <dt><code>int H5Pget_deflate (hid_t <em>plist</em>)</code>
- <dd>If dataset creation property list <em>plist</em> is set to
- use <code>H5Z_DEFLATE</code> compression then this function
- will return the aggression level, an integer between one and
- nine inclusive. If <em>plist</em> isn't a valid dataset
- creation property list or it isn't set to use the deflate
- method then a negative value is returned.
-
- <br><br>
- <dt><code>herr_t H5Pset_compression (hid_t <em>plist</em>,
- H5Z_method_t <em>method</em>, unsigned int <em>flags</em>,
- size_t <em>cd_size</em>, const void *<em>client_data</em>)</code>
- <dd>This is a catch-all function for defining compresion methods
- and is intended to be called from a wrapper such as
- <code>H5Pset_deflate()</code>. The dataset creation property
- list <em>plist</em> is adjusted to use the specified
- compression method. The <em>flags</em> is an 8-bit vector
- which is stored in the file as part of the compression message
- and passed to the compress and uncompress functions. The
- <em>client_data</em> is a byte array of length
- <em>cd_size</em> which is copied to the file and passed to the
- compress and uncompress methods.
-
- <br><br>
- <dt><code>H5Z_method_t H5Pget_compression (hid_t <em>plist</em>,
- unsigned int *<em>flags</em>, size_t *<em>cd_size</em>, void
- *<em>client_data</em>)</code>
- <dd>This is a catch-all function for querying the compression
- method associated with dataset creation property list
- <em>plist</em> and is intended to be called from a wrapper
- function such as <code>H5Pget_deflate()</code>. The
- compression method (or a negative value on error) is returned
- by value, and compression flags and client data is returned by
- argument. The application should allocate the
- <em>client_data</em> and pass its size as the
- <em>cd_size</em>. On return, <em>cd_size</em> will contain
- the actual size of the client data. If <em>client_data</em>
- is not large enough to hold the entire client data then
- <em>cd_size</em> bytes are copied into <em>client_data</em>
- and <em>cd_size</em> is set to the total size of the client
- data, a value larger than the original.
- </dl>
-
- <p>It is possible to set the compression to a method which hasn't
- been defined with <code>H5Zregister()</code> and which isn't
- supported as a predefined method (for instance, setting the
- method to <code>H5Z_DEFLATE</code> when the GNU zlib isn't
- available). If that happens then data will be written to the
- file in its uncompressed form and the compression statistics
- will show failures for the compression.
-
- <p>
- <center>
- <table border align=center width="100%">
- <caption align=bottom><h4>Example: Statistics for an
- Unsupported Compression Method</h4></caption>
- <tr>
- <td>
- <p>If an application attempts to use an unsupported
- method then the compression statistics will show large
- numbers of compression errors and no data
- uncompressed.
-
- <p><code><pre>
-H5Z: compression statistics accumulated over life of library:
- Method Total Overrun Errors User System Elapsed Bandwidth
- ------ ----- ------- ------ ---- ------ ------- ---------
- deflate-c 160000 0 160000 0.00 0.01 0.01 1.884e+07
- deflate-u 0 0 0 0.00 0.00 0.00 NaN
- </pre></code>
-
- <p>This example is from a program that tried to use
- <code>H5Z_DEFLATE</code> on a system that didn't have
- the GNU zlib to write to a dataset and then read the
- result. The read and write both succeeded but the
- data was not compressed.
- </td>
- </tr>
- </table>
- </center>
-
- <h2>5. Compression Diagnostics</h2>
-
- <p>If the library is compiled with debugging turned on for the H5Z
- layer (usually as a result of <code>configure --enable-debug=z</code>)
- then statistics about data compression are printed when the
- application exits normally or the library is closed. The
- statistics are written to the standard error stream and include
- two lines for each compression method that was used: the first
- line shows compression statistics while the second shows
- uncompression statistics. The following fields are displayed:
-
- <p>
- <center>
- <table align=center width="80%">
- <tr>
- <th width="30%">Field Name</th>
- <th width="70%">Description</th>
- </tr>
-
- <tr valign=top>
- <td>Method</td>
- <td>This is the name of the method as defined with
- <code>H5Zregister()</code> with the letters
- &quot;-c&quot; or &quot;-u&quot; appended to indicate
- compression or uncompression.</td>
- </tr>
-
- <tr valign=top>
- <td>Total</td>
- <td>The total number of bytes compressed or decompressed
- including buffer overruns and errors. Bytes of
- non-compressed data are counted.</td>
- </tr>
-
- <tr valign=top>
- <td>Overrun</td>
- <td>During compression, if the algorithm causes the result
- to be at least as large as the input then a buffer
- overrun error occurs. This field shows the total number
- of bytes from the Total column which can be attributed to
- overruns. Overruns for decompression can only happen if
- the data has been corrupted in some way and will result
- in failure of <code>H5Dread()</code>.</td>
- </tr>
-
- <tr valign=top>
- <td>Errors</td>
- <td>If an error occurs during compression the data is
- stored in it's uncompressed form; and an error during
- uncompression causes <code>H5Dread()</code> to return
- failure. This field shows the number of bytes of the
- Total column which can be attributed to errors.</td>
- </tr>
-
- <tr valign=top>
- <td>User, System, Elapsed</td>
- <td>These are the amount of user time, system time, and
- elapsed time in seconds spent by the library to perform
- compression. Elapsed time is sensitive to system
- load. These times may be zero on operating systems that
- don't support the required operations.</td>
- </tr>
-
- <tr valign=top>
- <td>Bandwidth</td>
- <td>This is the compression bandwidth which is the total
- number of bytes divided by elapsed time. Since elapsed
- time is subject to system load the bandwidth numbers
- cannot always be trusted. Furthermore, the bandwidth
- includes overrun and error bytes which may significanly
- taint the value.</td>
- </tr>
- </table>
- </center>
-
- <p>
- <center>
- <table border align=center width="100%">
- <caption align=bottom><h4>Example: Compression
- Statistics</h4></caption>
- <tr>
- <td>
- <p><code><pre>
-H5Z: compression statistics accumulated over life of library:
- Method Total Overrun Errors User System Elapsed Bandwidth
- ------ ----- ------- ------ ---- ------ ------- ---------
- deflate-c 160000 200 0 0.62 0.74 1.33 1.204e+05
- deflate-u 120000 0 0 0.11 0.00 0.12 9.885e+05
- </pre></code>
- </td>
- </tr>
- </table>
- </center>
-
- <hr>
- <address><a href="mailto:matzke@llnl.gov">Robb Matzke</a></address>
-<!-- Created: Fri Apr 17 13:39:35 EDT 1998 -->
-<!-- hhmts start -->
-Last modified: Fri Apr 17 16:15:21 EDT 1998
-<!-- hhmts end -->
- </body>
-</html>
diff --git a/doc/html/Filters.html b/doc/html/Filters.html
new file mode 100644
index 0000000..b9785c8
--- /dev/null
+++ b/doc/html/Filters.html
@@ -0,0 +1,463 @@
+<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
+<html>
+ <head>
+ <title>Filters</title>
+ </head>
+
+ <body>
+ <h1>Filters</h1>
+
+ <b>Note: Transient pipelines described in this document have not
+ been implemented.</b>
+
+ <h2>1. Introduction</h2>
+
+ <p>HDF5 allows chunked data to pass through user-defined filters
+ on the way to or from disk. The filters operate on chunks of an
+ <code>H5D_CHUNKED</code> dataset can be arranged in a pipeline
+ so output of one filter becomes the input of the next filter.
+
+ <p>Each filter has a two-byte identification number (type
+ <code>H5Z_filter_t</code>) allocated by NCSA and can also be
+ passed application-defined integer resources to control its
+ behavior. Each filter also has an optional ASCII comment
+ string.
+
+ <p>
+ <center>
+ <table align=center width="80%">
+ <caption alignment=top>
+ <b>Values for <code>H5Z_filter_t</code></b>
+ </caption>
+
+ <tr>
+ <th width="30%">Value</th>
+ <th width="70%">Description</th>
+ </tr>
+
+ <tr valign=top>
+ <td><code>0-255</code></td>
+ <td>These values are reserved for filters predefined and
+ registered by the HDF5 library and of use to the general
+ public. They are described in a separate section
+ below.</td>
+ </tr>
+
+ <tr valign=top>
+ <td><code>256-511</code></td>
+ <td>Filter numbers in this range are used for testing only
+ and can be used temporarily by any organization. No
+ attempt is made to resolve numbering conflicts since all
+ definitions are by nature temporary.</td>
+ </tr>
+
+ <tr valign=top>
+ <td><code>512-65535</code></td>
+ <td>Reserved for future assignment. Please contact the
+ <a href="mailto:hdf5dev@ncsa.uiuc.edu">HDF5 development
+ team</a> to reserve a value or range of values for
+ use by your filters.</td>
+ </table>
+ </center>
+
+ <h2>2. Defining and Querying the Filter Pipeline</h2>
+
+ <p>Two types of filters can be applied to raw data I/O: permanent
+ filters and transient filters. The permanent filter pipeline is
+ defned when the dataset is created while the transient pipeline
+ is defined for each I/O operation. During an
+ <code>H5Dwrite()</code> the transient filters are applied first
+ in the order defined and then the permanent filters are applied
+ in the order defined. For an <code>H5Dread()</code> the
+ opposite order is used: permanent filters in reverse order, then
+ transient filters in reverse order. An <code>H5Dread()</code>
+ must result in the same amount of data for a chunk as the
+ original <code>H5Dwrite()</code>.
+
+ <p>The permanent filter pipeline is defined by calling
+ <code>H5Pset_filter()</code> for a dataset creation property
+ list while the transient filter pipeline is defined by calling
+ that function for a dataset transfer property list.
+
+ <dl>
+ <dt><code>herr_t H5Pset_filter (hid_t <em>plist</em>,
+ H5Z_filter_t <em>filter</em>, unsigned int <em>flags</em>,
+ size_t <em>cd_nelmts</em>, const unsigned int
+ <em>cd_values</em>[])</code>
+ <dd>This function adds the specified <em>filter</em> and
+ corresponding properties to the end of the transient or
+ permanent output filter pipeline (depending on whether
+ <em>plist</em> is a dataset creation or dataset transfer
+ property list). The <em>flags</em> argument specifies certain
+ general properties of the filter and is documented below. The
+ <em>cd_values</em> is an array of <em>cd_nelmts</em> integers
+ which are auxiliary data for the filter. The integer values
+ will be stored in the dataset object header as part of the
+ filter information.
+
+ <br><br>
+ <dt><code>int H5Pget_nfilters (hid_t <em>plist</em>)</code>
+ <dd>This function returns the number of filters defined in the
+ permanent or transient filter pipeline depending on whether
+ <em>plist</em> is a dataset creation or dataset transfer
+ property list. In each pipeline the filters are numbered from
+ 0 through <em>N</em>-1 where <em>N</em> is the value returned
+ by this function. During output to the file the filters of a
+ pipeline are applied in increasing order (the inverse is true
+ for input). Zero is returned if there are no filters in the
+ pipeline and a negative value is returned for errors.
+
+ <br><br>
+ <dt><code>H5Z_filter_t H5Pget_filter (hid_t <em>plist</em>,
+ int <em>filter_number</em>, unsigned int *<em>flags</em>,
+ size_t *<em>cd_nelmts</em>, unsigned int
+ *<em>cd_values</em>)</code>
+ <dd>This is the query counterpart of
+ <code>H5Pset_filter()</code> and returns information about a
+ particular filter number in a permanent or transient pipeline
+ depending on whether <em>plist</em> is a dataset creation or
+ dataset transfer property list. On input, <em>cd_nelmts</em>
+ indicates the number of entries in the <em>cd_values</em>
+ array allocated by the caller while on exit it contains the
+ number of values defined by the filter. The
+ <em>filter_number</em> should be a value between zero and
+ <em>N</em>-1 as described for <code>H5Pget_nfilters()</code>
+ and the function will return failure (a negative value) if the
+ filter number is out of range.
+ </dl>
+
+ <p>The flags argument to the functions above is a bit vector of
+ the following fields:
+
+ <p>
+ <center>
+ <table align=center width="80%">
+ <caption align=top>
+ <b>Values for the <em>flags</em> argument</b>
+ </caption>
+
+ <tr>
+ <th width="30%">Value</th>
+ <th width="70%">Description</th>
+ </tr>
+
+ <tr valign=top>
+ <td><code>H5Z_FLAG_OPTIONAL</code></td>
+ <td>If this bit is set then the filter is optional. If
+ the filter fails (see below) during an
+ <code>H5Dwrite()</code> operation then the filter is
+ just excluded from the pipeline for the chunk for which
+ it failed; the filter will not participate in the
+ pipeline during an <code>H5Dread()</code> of the chunk.
+ This is commonly used for compression filters: if the
+ compression result would be larger than the input then
+ the compression filter returns failure and the
+ uncompressed data is stored in the file. If this bit is
+ clear and a filter fails then the
+ <code>H5Dwrite()</code> or <code>H5Dread()</code> also
+ fails.</td>
+ </tr>
+ </table>
+ </center>
+
+ <h2>3. Defining Filters</h2>
+
+ <p>Each filter is bidirectional, handling both input and output to
+ the file, and a flag is passed to the filter to indicate the
+ direction. In either case the filter reads a chunk of data from
+ a buffer, usually performs some sort of transformation on the
+ data, places the result in the same or new buffer, and returns
+ the buffer pointer and size to the caller. If something goes
+ wrong the filter should return zero to indicate a failure.
+
+ <p>During output, a filter that fails or isn't defined and is
+ marked as optional is silently excluded from the pipeline and
+ will not be used when reading that chunk of data. A required
+ filter that fails or isn't defined causes the entire output
+ operation to fail. During input, any filter that has not been
+ excluded from the pipeline during output and fails or is not
+ defined will cause the entire input operation to fail.
+
+ <p>Filters are defined in two phases. The first phase is to
+ define a function to act as the filter and link the function
+ into the application. The second phase is to register the
+ function, associating the function with an
+ <code>H5Z_filter_t</code> identification number and a comment.
+
+ <dl>
+ <dt><code>typedef size_t (*H5Z_func_t)(unsigned int
+ <em>flags</em>, size_t <em>cd_nelmts</em>, unsigned int
+ *<em>cd_values</em>, size_t <em>nbytes</em>, size_t
+ *<em>buf_size</em>, void **<em>buf</em>)</code>
+ <dd>The <em>flags</em>, <em>cd_nelmts</em>, and
+ <em>cd_values</em> are the same as for the
+ <code>H5Pset_filter()</code> function with the additional flag
+ <code>H5Z_FLAG_REVERSE</code> which is set when the filter is
+ called as part of the input pipeline. The input buffer is
+ pointed to by <em>*buf</em> and has a total size of
+ <em>*buf_size</em> bytes but only <em>nbytes</em> are valid
+ data. The filter should perform the transformation in place if
+ possible and return the number of valid bytes or zero for
+ failure. If the transformation cannot be done in place then
+ the filter should allocate a new buffer with
+ <code>malloc()</code> and assign it to <em>*buf</em>,
+ assigning the allocated size of that buffer to
+ <em>*buf_size</em>. The old buffer should be freed
+ by calling <code>free()</code>.
+
+ <br><br>
+ <dt><code>herr_t H5Zregister (H5Z_filter_t <em>filter_id</em>,
+ const char *<em>comment</em>, H5Z_func_t
+ <em>filter</em>)</code>
+ <dd>The <em>filter</em> function is associated with a filter
+ number and a short ASCII comment which will be stored in the
+ hdf5 file if the filter is used as part of a permanent
+ pipeline during dataset creation.
+ </dl>
+
+
+ <h2>4. Predefined Filters</h2>
+
+ <p>If GNU <code>zlib</code> version 1.1.2 or later was found
+ during configuration then the library will define a filter whose
+ <code>H5Z_filter_t</code> number is
+ <code>H5Z_FILTER_DEFLATE</code>. Since this compression method
+ has the potential for generating compressed data which is larger
+ than the original, the <code>H5Z_FLAG_OPTIONAL</code> flag
+ should be turned on so such cases can be handled gracefully by
+ storing the original data instead of the compressed data. The
+ <em>cd_nvalues</em> should be one with <em>cd_value[0]</em>
+ being a compression agression level between zero and nine,
+ inclusive (zero is the fastest compression while nine results in
+ the best compression ratio).
+
+ <p>A convenience function for adding the
+ <code>H5Z_FILTER_DEFLATE</code> filter to a pipeline is:
+
+ <dl>
+ <dt><code>herr_t H5Pset_deflate (hid_t <em>plist</em>, unsigned
+ <em>aggression</em>)</code>
+ <dd>The deflate compression method is added to the end of the
+ permanent or transient filter pipeline depending on whether
+ <em>plist</em> is a dataset creation or dataset transfer
+ property list. The <em>aggression</em> is a number between
+ zero and nine (inclusive) to indicate the tradeoff between
+ speed and compression ratio (zero is fastest, nine is best
+ ratio).
+ </dl>
+
+ <p>Even if the GNU <code>zlib</code> isn't detected during
+ configuration the application can define
+ <code>H5Z_FILTER_DEFLATE</code> as a permanent filter. If the
+ filter is marked as optional (as with
+ <code>H5Pset_deflate()</code>) then it will always fail and be
+ automatically removed from the pipeline. Applications that read
+ data will fail only if the data is actually compressed; they
+ won't fail if <code>H5Z_FILTER_DEFLATE</code> was part of the
+ permanent output pipeline but was automatically excluded because
+ it didn't exist when the data was written.
+
+ <h2>5. Example</h2>
+
+ <p>This example shows how to define and register a simple filter
+ that adds a checksum capability to the data stream.
+
+ <p>The function that acts as the filter always returns zero
+ (failure) if the <code>md5()</code> function was not detected at
+ configuration time (left as an excercise for the reader).
+ Otherwise the function is broken down to an input and output
+ half. The output half calculates a checksum, increases the size
+ of the output buffer if necessary, and appends the checksum to
+ the end of the buffer. The input half calculates the checksum
+ on the first part of the buffer and compares it to the checksum
+ already stored at the end of the buffer. If the two differ then
+ zero (failure) is returned, otherwise the buffer size is reduced
+ to exclude the checksum.
+
+ <p>
+ <center>
+ <table border align=center width="100%">
+ <tr>
+ <td>
+ <p><code><pre>
+
+size_t
+md5_filter(unsigned int flags, size_t cd_nelmts, unsigned int *cd_values,
+ size_t nbytes, size_t *buf_size, void **buf)
+{
+#ifdef HAVE_MD5
+ unsigned char cksum[16];
+
+ if (flags & H5Z_REVERSE) {
+ /* Input */
+ assert(nbytes>=16);
+ md5(nbytes-16, *buf, cksum);
+
+ /* Compare */
+ if (memcmp(cksum, (char*)(*buf)+nbytes-16, 16)) {
+ return 0; /*fail*/
+ }
+
+ /* Strip off checksum */
+ return nbytes-16;
+
+ } else {
+ /* Output */
+ md5(nbytes, *buf, cksum);
+
+ /* Increase buffer size if necessary */
+ if (nbytes+16>*buf_size) {
+ *buf_size = nbytes + 16;
+ *buf = realloc(*buf, *buf_size);
+ }
+
+ /* Append checksum */
+ memcpy((char*)(*buf)+nbytes, cksum, 16);
+ return nbytes+16;
+ }
+#else
+ return 0; /*fail*/
+#endif
+}
+ </pre></code>
+ </td>
+ </tr>
+ </table>
+ </center>
+
+ <p>Once the filter function is defined it must be registered so
+ the HDF5 library knows about it. Since we're testing this
+ filter we choose one of the <code>H5Z_filter_t</code> numbers
+ from the reserved range. We'll randomly choose 305.
+
+ <p>
+ <center>
+ <table border align=center width="100%">
+ <tr>
+ <td>
+ <p><code><pre>
+
+#define FILTER_MD5 305
+herr_t status = H5Zregister(FILTER_MD5, "md5 checksum", md5_filter);
+ </pre></code>
+ </td>
+ </tr>
+ </table>
+ </center>
+
+ <p>Now we can use the filter in a pipeline. We could have added
+ the filter to the pipeline before defining or registering the
+ filter as long as the filter was defined and registered by time
+ we tried to use it (if the filter is marked as optional then we
+ could have used it without defining it and the library would
+ have automatically removed it from the pipeline for each chunk
+ written before the filter was defined and registered).
+
+ <p>
+ <center>
+ <table border align=center width="100%">
+ <tr>
+ <td>
+ <p><code><pre>
+
+hid_t dcpl = H5Pcreate(H5P_DATASET_CREATE);
+hsize_t chunk_size[3] = {10,10,10};
+H5Pset_chunk(dcpl, 3, chunk_size);
+H5Pset_filter(dcpl, FILTER_MD5, 0, 0, NULL);
+hid_t dset = H5Dcreate(file, "dset", H5T_NATIVE_DOUBLE, space, dcpl);
+ </pre></code>
+ </td>
+ </tr>
+ </table>
+ </center>
+
+ <h2>6. Filter Diagnostics</h2>
+
+ <p>If the library is compiled with debugging turned on for the H5Z
+ layer (usually as a result of <code>configure
+ --enable-debug=z</code>) then filter statistics are printed when
+ the application exits normally or the library is closed. The
+ statistics are written to the standard error stream and include
+ two lines for each filter that was used: one for input and one
+ for output. The following fields are displayed:
+
+ <p>
+ <center>
+ <table align=center width="80%">
+ <tr>
+ <th width="30%">Field Name</th>
+ <th width="70%">Description</th>
+ </tr>
+
+ <tr valign=top>
+ <td>Method</td>
+ <td>This is the name of the method as defined with
+ <code>H5Zregister()</code> with the charaters
+ &quot;&lt; or &quot;&gt;&quot; prepended to indicate
+ input or output.</td>
+ </tr>
+
+ <tr valign=top>
+ <td>Total</td>
+ <td>The total number of bytes processed by the filter
+ including errors. This is the maximum of the
+ <em>nbytes</em> argument or the return value.
+ </tr>
+
+ <tr valign=top>
+ <td>Errors</td>
+ <td>This field shows the number of bytes of the Total
+ column which can be attributed to errors.</td>
+ </tr>
+
+ <tr valign=top>
+ <td>User, System, Elapsed</td>
+ <td>These are the amount of user time, system time, and
+ elapsed time in seconds spent in the filter function.
+ Elapsed time is sensitive to system load. These times
+ may be zero on operating systems that don't support the
+ required operations.</td>
+ </tr>
+
+ <tr valign=top>
+ <td>Bandwidth</td>
+ <td>This is the filter bandwidth which is the total
+ number of bytes processed divided by elapsed time.
+ Since elapsed time is subject to system load the
+ bandwidth numbers cannot always be trusted.
+ Furthermore, the bandwidth includes bytes attributed to
+ errors which may significanly taint the value if the
+ function is able to detect errors without much
+ expense.</td>
+ </tr>
+ </table>
+ </center>
+
+ <p>
+ <center>
+ <table border align=center width="100%">
+ <caption align=bottom>
+ <b>Example: Filter Statistics</b>
+ </caption>
+ <tr>
+ <td>
+ <p><code><pre>
+H5Z: filter statistics accumulated over life of library:
+ Method Total Errors User System Elapsed Bandwidth
+ ------ ----- ------ ---- ------ ------- ---------
+ >deflate 160000 40000 0.62 0.74 1.33 117.5 kBs
+ &lt;deflate 120000 0 0.11 0.00 0.12 1.000 MBs
+ </pre></code>
+ </td>
+ </tr>
+ </table>
+ </center>
+
+ <hr>
+ <address><a href="mailto:matzke@llnl.gov">Robb Matzke</a></address>
+<!-- Created: Fri Apr 17 13:39:35 EDT 1998 -->
+<!-- hhmts start -->
+Last modified: Tue Aug 4 16:04:43 EDT 1998
+<!-- hhmts end -->
+ </body>
+</html>
diff --git a/src/H5public.h b/src/H5public.h
index 136328f..5647e36 100644
--- a/src/H5public.h
+++ b/src/H5public.h
@@ -27,7 +27,7 @@
/* Version numbers */
#define H5_VERS_MAJOR 1 /* For major interface/format changes */
#define H5_VERS_MINOR 0 /* For minor interface/format changes */
-#define H5_VERS_RELEASE 51 /* For tweaks, bug-fixes, or development */
+#define H5_VERS_RELEASE 58 /* For tweaks, bug-fixes, or development */
#define H5check() H5vers_check(H5_VERS_MAJOR,H5_VERS_MINOR, \
H5_VERS_RELEASE)