[svn-r7195] Purpose:

New tool.

Description:
A new tool to build the HDF5 library.  This was historically the
makeh5 command.  Added here so that it can be used in machines outside
of the HDF Groups.  Having it in the source allows version specific
customization.

Platforms tested:
Did run h5committest which failed due to other source code problems.
Tested it by hand by ../hdf5/bin/buildhdf5 and passed as far as its
own functionality.

Misc. update:

2 files changed, 316 insertions, 0 deletions

diff --git a/MANIFEST b/MANIFEST
index b428cfb..80e1729 100644
--- a/MANIFEST
+++ b/MANIFEST
@@ -16,6 +16,7 @@
 ./configure
 ./configure.in
 
+./bin/buildhdf5
 ./bin/checkapi				_DO_NOT_DISTRIBUTE_
 ./bin/checkposix			_DO_NOT_DISTRIBUTE_
 ./bin/chkmanifest
diff --git a/bin/buildhdf5 b/bin/buildhdf5
new file mode 100755
index 0000000..4ceec6d
--- /dev/null
+++ b/bin/buildhdf5
@@ -0,0 +1,315 @@
+#!/bin/sh
+# Build HDF5 library by doing configure, make, and tests.
+# Usage: See USAGE()
+# Programmer: Albert Cheng
+# Creation date: Jul  9, 2003
+
+# Some handy definitions
+USAGE()
+{
+cat <<EOF
+Buildhdf5 builds the HDF5 library by running configure, make and make check.
+It skips the configure part if one has been done already.  In effect, one
+can continue from a previous build.
+
+Command Syntax
+==============
+buildhdf5 [-config] [-gass] [-srcdir dir] config-arguments ...
+   -config:	run configure only. [default to do build too]
+   -gass:	configure for the GASS driver
+   -help:	show this help page
+   -n:   	no execution, just show commands
+   -srcdir:	use dir as the source directory
+             	   [Note: this is different from --srcdir
+             	    which will be passed to configure]
+   all other arguments are passed to configure
+
+
+Configure in place or by srcdir
+===============================
+By default, the command looks for the configure command in
+'.' and then '../hdf5'.  When it finds it, it uses it to do
+the configure part.  In effect, if ./configure is found, it
+does the build in place.  If it finds ../hdf5/configure, it
+does the --srcdir (that is separated source) build.  Therefore,
+if you have the following structure setup, you can run multiple
+hosts building simultantously using a common source code.
+     hdf5_1.4/hdf5        # holds the source
+	  .../arabica     # for SunOS 2.7
+	  .../arabicapp   # for SunOS 2.7 parallel
+	  .../burrwhite   # for Linux 2.4
+
+Installing binary
+=================
+This command always install the binary in \$PWD/installdir.
+This allows multiple install testing in the same host if the srcdir
+configure is used.
+EOF
+}
+
+
+TIMESTAMP()
+{
+    echo "=====" "`date`" "====="
+}
+
+
+QUIT()
+{
+    TIMESTAMP
+}
+
+
+# Do one step bracketed with time stamps
+# The '< /dev/null' is needed to prevent some applications like MPI
+# jobs blocked for reading when they read stdin unnecessary.
+STEP()
+{
+    banner="$1"
+    command="$2"
+    resultfile="$3"
+
+    echo "$banner"
+    (TIMESTAMP; nerror=0 ;
+	echo "eval $command"
+	eval $command || nerror=1 ;
+	TIMESTAMP; exit $nerror) < /dev/null >> "$resultfile" 2>&1
+    if [ $? -ne 0 ]; then
+	echo "error in '$banner'.  buildhdf5 aborted."
+	exit 1
+    fi
+}
+
+
+# Try locate the HDF4 library
+# This is a hack because there is no consistent place to find
+# the valid HDF library.
+LOCATE_HDF4()
+{
+    OS=`uname -s`
+    echo OS=$OS
+    case "$OS" in
+	HP-UX)
+	    h4paths="/afs/ncsa/packages/hdf/HPUX_10.20"
+	    ;;
+	IRIX)
+	    h4paths="/afs/ncsa/packages/hdf/4.1r3_irix"
+	    ;;
+	IRIX64)
+	    case "$CC" in
+	    *-n32)
+		h4paths="/afs/ncsa/packages/hdf/IRIX64-n32_6.5"
+		;;
+	    *)
+		h4paths="/afs/ncsa/packages/hdf/IRIX64_6.5"
+		;;
+	    esac
+	    ;;
+	Linux)
+	    h4paths="/afs/ncsa/packages/hdf/linux"
+	    ;;
+	OSF1)
+	    h4paths="/afs/ncsa/packages/hdf/OSF1_V4.0"
+	    ;;
+	*)
+	    h4paths="/usr/ncsa /usr/sdt"
+	    ;;
+    esac
+    echo $h4paths
+    for h4 in $h4paths; do
+	if [ -f $h4/lib/libdf.a -a -f $h4/include/hdf.h ]; then
+	    WITH_H4="--with-hdf4=$h4/include,$h4/lib"
+	    break
+	fi
+    done
+    echo WITH_H4="$WITH_H4"
+}
+
+
+# Try locate the Fortran compiler
+# This is a hack because there is no consistent fortran compiler name
+LOCATE_FORTRAN()
+{
+    OS=`uname -s`
+    echo OS=$OS
+    case "$OS" in
+	IRIX64)
+	    case "$CC" in
+	    *-n32)
+		gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-n32_nothreads_standard_debug
+		sslpaths=/usr/local/ssl-n32
+		;;
+	    *)
+		gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-64_nothreads_standard_debug
+		sslpaths=/usr/local/ssl
+		;;
+	    esac
+	    ;;
+	*)
+	    ;;
+    esac
+    echo gasspaths=$gasspaths
+    echo $sslpaths=$sslpaths
+    for x in $gasspaths dummy; do
+	if [ $x != dummy -a -f $x/lib/libglobus_gass_cache.a ]; then
+	   WITH_GASS="--with-gass=$x/include,$x/lib"
+	   break
+	fi
+    done
+    for x in $sslpaths dummy; do
+	if [ $x != dummy -a -f $x/lib/libssl.a ]; then
+	   WITH_SSL="--with-ssl=$x/lib"
+	   break
+	fi
+    done
+
+    echo WITH_GASS="$WITH_GASS"
+    echo WITH_SSL="$WITH_SSL"
+
+}
+
+
+# Try locate the GASS software library
+# This is a hack because there is no consistent place to find
+# the valid HDF library.
+LOCATE_GASS()
+{
+    OS=`uname -s`
+    echo OS=$OS
+    case "$OS" in
+	IRIX64)
+	    case "$CC" in
+	    *-n32)
+		gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-n32_nothreads_standard_debug
+		sslpaths=/usr/local/ssl-n32
+		;;
+	    *)
+		gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-64_nothreads_standard_debug
+		sslpaths=/usr/local/ssl
+		;;
+	    esac
+	    ;;
+	*)
+	    ;;
+    esac
+    echo gasspaths=$gasspaths
+    echo $sslpaths=$sslpaths
+    for x in $gasspaths dummy; do
+	if [ $x != dummy -a -f $x/lib/libglobus_gass_cache.a ]; then
+	   WITH_GASS="--with-gass=$x/include,$x/lib"
+	   break
+	fi
+    done
+    for x in $sslpaths dummy; do
+	if [ $x != dummy -a -f $x/lib/libssl.a ]; then
+	   WITH_SSL="--with-ssl=$x/lib"
+	   break
+	fi
+    done
+
+    echo WITH_GASS="$WITH_GASS"
+    echo WITH_SSL="$WITH_SSL"
+
+}
+
+
+# Configure.  Default to do --srcdir.
+CONFIG()
+{
+    INSTALLDIR=`pwd`/installdir
+
+    test -d $INSTALLDIR ||  ( echo mkdir $INSTALLDIR; \
+	test "$NOEXEC" != 'noexec' && mkdir $INSTALLDIR )
+    CMD="$SRCDIR/configure --prefix=$INSTALLDIR $*"
+    echo $CMD
+    if [ "$NOEXEC" != 'noexec' ]; then
+	$CMD
+    else
+	true		# set exit code as 0
+    fi
+}
+
+# Main body
+TIMESTAMP
+trap QUIT 0
+
+#
+# setup
+#
+MAKE=${MAKE:-'gmake'}
+export MAKE
+CONFIGURE="CONFIG"
+CONFIG_ONLY=no		# default is configure and build
+NOEXEC=			# default to execute commands
+SRCDIRLIST=". ../hdf5"  # places to look for configure
+nerror=0
+
+# parse some options
+while [ $# -gt 0 ]; do
+    case "$1" in
+	-config)
+	    # do configure only
+	    CONFIG_ONLY=yes
+	    ;;
+	-gass)
+	    LOCATE_GASS
+	    ;;
+	-help)
+	    USAGE
+	    exit 0
+	    ;;
+	-n)
+	    NOEXEC='noexec'
+	    ;;
+	-srcdir)
+	    shift
+	    SRCDIRLIST="$1"
+	    ;;
+	*)	# Quit parsing
+	    break
+	    ;;
+    esac
+    shift
+done
+	    
+# Figure out if srcdir is wished.
+# Make sure we are at the library root level
+# by checking couple typical files.  Not bullet-proof.
+for SRCDIR in $SRCDIRLIST dummy; do
+    if [ x-$SRCDIR = x-dummy ]; then
+	break
+    fi
+    if [ -d $SRCDIR/src -a -d $SRCDIR/config -a -f $SRCDIR/configure ]
+    then
+	break
+    fi
+done
+
+if [ x-$SRCDIR = x-dummy ]; then
+    echo "Could not find the source dir or configure script.  Abort."
+    exit 1
+fi
+
+# Configure
+# no configure if already done.
+if [ ! -f config.status ]; then
+    CONFIGURE="$CONFIGURE $WITH_SSL $WITH_GASS"
+    STEP "Configure HDF5..." "$CONFIGURE $*" "#config"
+else
+    STEP "Confiugre Skipped" "echo Confiugre Skipped" "#config"
+fi
+
+if [ x-$CONFIG_ONLY = x-yes ]; then
+    exit 0
+fi
+
+
+# Compile
+STEP "Make HDF5..." "$MAKE" "#make"
+
+# Tests
+STEP "Testing HDF5..." "$MAKE check" "#test"
+
+# all done
+echo "No Errors encountered"
+TIMESTAMP