[svn-r26145] Removed bin/reconfigure.

The autogen.sh script seems to work in enough places
and for enough people to warrant removing bin/reconfigure.

2 files changed, 2 insertions, 157 deletions

diff --git a/MANIFEST b/MANIFEST
index a5091aa..9001ff2 100644
--- a/MANIFEST
+++ b/MANIFEST
@@ -32,9 +32,9 @@
 ./README.txt
 ./BRANCH.txt
 ./acsite.m4
-./autogen.sh
+./autogen.sh           _DO_NOT_DISTRIBUTE_
 ./configure.ac
-./configure.ac.orig
+./configure.ac.orig    _DO_NOT_DISTRIBUTE_
 
 ./bin/COPYING
 ./bin/buildhdf5
@@ -67,7 +67,6 @@
 ./bin/mkdirs
 ./bin/mkinstalldirs
 ./bin/newer
-./bin/reconfigure      _DO_NOT_DISTRIBUTE_
 ./bin/output_filter.sh
 ./bin/README        _DO_NOT_DISTRIBUTE_
 ./bin/release
diff --git a/bin/reconfigure b/bin/reconfigure
deleted file mode 100755
index 5aa5ece..0000000
--- a/bin/reconfigure
+++ /dev/null
@@ -1,154 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.                                              
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-
-# A script to reconfigure autotools for HDF5, and to recreate other
-# generated files specifc to HDF5.
-# If the paths of the autotools are not specified by the user, they
-# are hardcoded to point to their locations on HDF5 Linux machines.
-# Users can specify the locations of the autotools with the following
-# variables:
-# AUTOCONF, AUTOMAKE, ACLOCAL, AUTOHEADER should be the path to the
-# corresponding tools.
-# LIBTOOL_DIR should be the path to the base libtool directory;
-# $LIBTOOL_DIR/bin/libtool should invoke libtool, while
-# $LIBTOOL_DIR/share/aclocal needs to be included by aclocal.
-# Be very careful when specifying these tools manually!  There are a lot
-# of versions that can get confused (not even counting the m4 utility)!
-
-# HDF5 currently uses the following versions of the autotools:
-AUTOCONF_VERSION="autoconf (GNU Autoconf) 2.69"
-AUTOMAKE_VERSION="automake (GNU automake) 1.14.1"
-AUTOHEADER_VERSION="autoheader (GNU Autoconf) 2.69"
-ACLOCAL_VERSION="aclocal (GNU automake) 1.14.1"
-LIBTOOL_VERSION="(GNU libtool) 2.4.2"
-M4_VERSION="m4 (GNU M4) 1.4.17"
-
-#
-# When upgrading automake's version, don't forget to also update its
-# helper utilities, especially depcomp.
-
-
-# If paths to autotools are not specified by the user, assume tools are
-# running on jam in /mnt/hdf/packages and set paths accordingly.
-if test -z ${AUTORECONF}; then
-  AUTORECONF=/mnt/hdf/packages/autoconf/autoconf-2.69/bin/autoreconf
-fi
-if test -z ${AUTOCONF}; then
-  AUTOCONF=/mnt/hdf/packages/autoconf/autoconf-2.69/bin/autoconf
-fi
-if test -z ${AUTOMAKE}; then
-  AUTOMAKE=/mnt/hdf/packages/automake/automake-1.14.1/bin/automake-1.14
-fi
-if test -z ${AUTOHEADER}; then
-  AUTOHEADER=/mnt/hdf/packages/autoconf/autoconf-2.69/bin/autoheader
-fi
-if test -z ${ACLOCAL}; then
-  ACLOCAL=/mnt/hdf/packages/automake/automake-1.14.1/bin/aclocal-1.14
-fi
-if test -z ${LIBTOOL}; then
-  LIBTOOL=/mnt/hdf/packages/libtool/libtool-2.4.2/bin/libtool
-fi
-if test -z ${M4}; then
-  M4=/mnt/hdf/packages/m4/m4-1.4.17/bin/m4
-fi
-
-# Check version numbers of all autotools against the "correct" versions
-AC_VERS=`${AUTOCONF} --version 2>&1 | grep "^${AUTOCONF_VERSION}"`
-if test -z "${AC_VERS}"; then
-   echo "${AUTOCONF} version is not ${AUTOCONF_VERSION}"
-   exit 1
-fi
-AM_VERS=`${AUTOMAKE} --version 2>&1 | grep "^${AUTOMAKE_VERSION}"`
-if test -z "${AM_VERS}"; then
-   echo "${AUTOMAKE} version is not ${AUTOMAKE_VERSION}"
-   exit 1
-fi
-AH_VERS=`${AUTOHEADER} --version 2>&1 | grep "^${AUTOHEADER_VERSION}"`
-if test -z "${AH_VERS}"; then
-   echo "${AUTOHEADER} version is not ${AUTOHEADER_VERSION}"
-   exit 1
-fi
-AL_VERS=`${ACLOCAL} --version 2>&1 | grep "^${ACLOCAL_VERSION}"`
-if test -z "${AL_VERS}"; then
-   echo "${ACLOCAL} version is not ${ACLOCAL_VERSION}"
-   exit 1
-fi
-LT_VERS=`${LIBTOOL} --version 2>&1 | grep "${LIBTOOL_VERSION}"`
-if test -z "${LT_VERS}"; then
-   echo "${LIBTOOL} version is not ${LIBTOOL_VERSION}"
-   exit 1
-fi
-M4_VERS=`${M4} --version 2>&1 | grep "${M4_VERSION}"`
-if test -z "${M4_VERS}"; then
-   echo "${M4} version is not ${M4_VERSION}"
-   exit 1
-fi
-
-# Make sure that the tools are in the path.
-AUTOCONF_DIR=`dirname ${AUTOCONF}`
-LIBTOOL_DIR=`dirname ${LIBTOOL}`
-M4_DIR=`dirname ${M4}`
-PATH=${AUTOCONF_DIR}:${M4_DIR}:$PATH
-
-# Run autoconf/automake commands in order
-  echo ${ACLOCAL} -I ${LIBTOOL_DIR}/../share/aclocal
-  ${ACLOCAL} -I ${LIBTOOL_DIR}/../share/aclocal || exit 1
-
-  echo ${AUTOHEADER}
-  ${AUTOHEADER} || exit 1
-
-  echo ${AUTOMAKE} --add-missing
-  ${AUTOMAKE} --add-missing || exit 1
-
-  echo ${AUTOCONF}
-  ${AUTOCONF} || exit 1
-
-# Clean up top-level Makefile.in
-# pmake wants an argument to be the first non-comment line it encounters
-# in the Makefile.  Automake wants to reorganize the Makefile.
-# To work around this, we post-process the top-level Makefile.in.
-  sed "s/^#xxx//" Makefile.in > Makefile.in.new
-  mv Makefile.in.new Makefile.in
-
-# Run trace script
-# The trace script adds H5TRACE macros to library source files.  It should
-# have no effect on files that don't have HDF5 API macros in them.
-echo
-echo "    Running trace script:"
-bin/trace src/H5*.c || exit 1
-
-# Run make_err
-# make_err automatically generates the H5E headers that create error message
-# types for HDF5.
-echo
-echo "    Running error generation script:"
-bin/make_err src/H5err.txt || exit 1
-
-# Run make_vers
-# make_vers automatically generates the public headers that define the API version
-# macros for HDF5.
-echo
-echo "    Running API version generation script:"
-bin/make_vers src/H5vers.txt || exit 1
-
-# Run flex
-# automatically generates the lexical file for hl/src/H5LTanalyze.c
-echo
-echo "    Running flex generation script:"
-bin/genltanalyze || exit 1
-
-exit 0
-