[svn-r9902] Purpose:

Configuration feature

Description:
HDF5 now uses automake to generate Makefiles

Solution:
Makefile.in files are now generated from Makefile.am files.
To reconfigure (after chaning a Makefile.am or configure.in):
/bin/sh bin/reconfigure.sh

Platforms tested:
Many

1 files changed, 681 insertions, 141 deletions

diff --git a/Makefile.in b/Makefile.in
index f4a7303..4c81a56 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,163 +1,703 @@
-##
-## Copyright by the Board of Trustees of the University of Illinois.
-## All rights reserved.
-##
-## This file is part of HDF5.  The full HDF5 copyright notice, including
-## terms governing use, modification, and redistribution, is contained in
-## the files COPYING and Copyright.html.  COPYING can be found at the root
-## of the source code distribution tree; Copyright.html can be found at the
-## root level of an installed copy of the electronic HDF5 document set and
-## is linked from the top-level documents page.  It can also be found at
-## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-## 
-## This makefile mostly just reinvokes make in the various subdirectories
-## but does so in the correct order.  You can alternatively invoke make from
-## each subdirectory manually.
-##
-## Top-level HDF5 Makefile(.in)
-##
-top_srcdir=@top_srcdir@
-top_builddir=.
-srcdir=@srcdir@
-@COMMENCE@
-
-# Subdirectories in build-order (not including `examples')
-# TESTPARALLEL must be after test since it uses libtest.a.  Putting it
-# before tools allows parallel tests to run sooner.
-# HL must be last because it might depend on the FORTRAN library
-SUBDIRS=src test @TESTPARALLEL@ tools   @HDF5_INTERFACES@ @HL@
-
-##############################################################################
-##		    T A R G E T S
-##
-## all:		Build libraries, header files, tests, and programs in the
-##	 	various subdirectories but does not run tests or install the
-##		library, header files, or programs.  The components can be
-##		built individually with the targets lib, progs, and tests.
-## check:	Test the uninstalled library to make sure it works. You may
-##		also say `test' or `_test' (`test' doesn't work from the top
-##		level directory for some versions of make because `test' is
-##		also a directory).
-## install:	Installs libraries, header files, programs, and documentation
-##		in the various directories under the prefix directory (lib,
-##		include, bin, man, info).  Use the `--prefix=PATH' option
-##		to `configure' (or `config.status') or say `--help' for
-##		other alternatives.  The default prefix is `/usr/local'.
-## uninstall:	Delete all the installed files that the `install' target
-##		created (but not the noninstalled files such as `make all'
-##		created).
-## clean:	Removes temporary files except those that record the
-##		configuration and those that are part of the distribution.
-## mostlyclean:	Like `clean' except it doesn't delete a few files like
-##		libraries, programs, and/or generated header files because
-##		regenerating them is rarely necessary and takes a lot of time.
-## distclean:	Deletes all files that are created by configuring or building
-##		HDF5.  If you have unpacked the source and built HDF5 without
-##		creating any other files, then `make distclean' will leave
-##		only the files that were in the distrubution.
-## maintainer-clean:
-##		Like `distclean' except it deletes more files.  It deletes
-##		all generated files.  This target is not intended for normal
-##		users; it deletes files that may require special tools to
-##		rebuild.
-## TAGS:	Updates the tags table for this program.
-## dep depend:	Builds dependencies in all subdirectories.  These targets
-##		might not be available on certain combinations of make
-##		programs and C compilers.  At the other extreme, the GNU
-##		make used in combination with gcc will maintain dependency
-##		information automatically.
-lib progs check test _test uninstall:
-	@@SETX@; for d in $(SUBDIRS); do				      \
-	   (cd $$d && $(MAKE) $@) || exit 1;				      \
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+# 
+# This makefile mostly just reinvokes make in the various subdirectories
+# but does so in the correct order.  You can alternatively invoke make from
+# each subdirectory manually.
+#
+# Top-level HDF5 Makefile(.in)
+
+#------------------------------------------------------------ -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/commence' file which was generated with config.status
+# from `./config/commence.in'.
+#-----------------------------------------------------------------------------
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+
+# Install directories that automake doesn't know about
+includedir = $(exec_prefix)/include
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AWK = @AWK@
+BUILD_PDB2HDF = @BUILD_PDB2HDF@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CC_VERSION = @CC_VERSION@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_LIBS = @DEFAULT_LIBS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DYNAMIC_DIRS = @DYNAMIC_DIRS@
+ECHO = @ECHO@
+F77 = @F77@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FFLAGS = @FFLAGS@
+FILTERS = @FILTERS@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+GASS = @GASS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZET = @HSIZET@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MPE = @MPE@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+PACKAGE = @PACKAGE@
+PARALLEL = @PARALLEL@
+PERL = @PERL@
+PTHREAD = @PTHREAD@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SETX = @SETX@
+SIZE_T = @SIZE_T@
+SRB = @SRB@
+SSL = @SSL@
+STATIC_SHARED = @STATIC_SHARED@
+STRIP = @STRIP@
+TESTGASS = @TESTGASS@
+TESTPARALLEL = @TESTPARALLEL@
+TESTSRB = @TESTSRB@
+TRACE_API = @TRACE_API@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
+USE_FILTER_NBIT = @USE_FILTER_NBIT@
+USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+docdir = $(exec_prefix)/doc
+
+# Scripts used to build examples
+H5CC = $(bindir)/h5cc
+H5CC_PP = $(bindir)/h5pcc
+H5FC = $(bindir)/h5fc
+H5FC_PP = $(bindir)/h5pfc
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+
+
+# Define subdirectories to build.
+# Add this directory to SUBDIRS so that examples get built after tools
+# but before examples in extra interfaces (c++ and fortran).
+# Since we're explicitly listing DIST_SUBDIRS, we also need to list
+# directories that are only conditionally built (so that their Makefiles
+# are cleaned as well).
+# Note that `make clean' will not affect the examples or doc directories. 
+@BUILD_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar
+@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
+@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
+@BUILD_HDF5_HL_CONDITIONAL_TRUE@HDF5_HL_DIR = hl
+
+SUBDIRS = src test $(TESTPARALLEL_DIR) tools . $(CXX_DIR) $(FORTRAN_DIR) \
+         $(HDF5_HL_DIR)
+
+DIST_SUBDIRS = src test testpar tools . c++ fortran hl perform examples  \
+          doc 
+
+
+# Some files generated during configure that should be cleaned
+DISTCLEANFILES = src/H5config.h src/H5pubconf.h config/stamp1 config/stamp2
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/H5config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = COPYING Makefile.am Makefile.in aclocal.m4 bin/compile \
+	bin/config.guess bin/config.sub bin/depcomp bin/install-sh \
+	bin/ltmain.sh bin/missing bin/mkinstalldirs configure \
+	configure.in
+all: all-recursive
+
+.SUFFIXES:
+
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno
+$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4):  configure.in 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 
-tests TAGS dep depend:
-	@@SETX@; for d in $(SUBDIRS) perform; do		              \
-	   (cd $$d && $(MAKE) $@) || exit 1;				      \
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+distdir = $(PACKAGE)-$(VERSION)
+
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+
+GZIP_ENV = --best
+distcleancheck_listfiles = find . -type f -print
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	mkdir $(distdir)
+	$(mkinstalldirs) $(distdir)/bin $(distdir)/c++/src $(distdir)/fortran/src $(distdir)/src $(distdir)/testpar $(distdir)/tools/h5dump $(distdir)/tools/h5jam $(distdir)/tools/h5repack $(distdir)/tools/misc
+	@list='$(DISTFILES)'; for file in $$list; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
 	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
 
-install-all:
-	@@SETX@; for d in dummy @HDF5_INTERFACES@; do			      \
-	  if test $$d != "dummy"; then					      \
-	    (cd $$d && $(MAKE) $@) || exit 1;				      \
-	  fi;								      \
+dist dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	$(am__remove_distdir)
+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
+	  && cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+	      || { echo "ERROR: files left after uninstall:" ; \
+	           find $$dc_install_base -type f -print ; \
+	           exit 1; } >&2 ) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+	  && rm -f $(distdir).tar.gz \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@echo "$(distdir).tar.gz is ready for distribution" | \
+	  sed 'h;s/./=/g;p;x;p;x'
+distcleancheck: distclean
+	if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile all-local
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am: installcheck-local
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf autom4te.cache
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am all-local check check-am \
+	clean clean-generic clean-libtool clean-local clean-recursive \
+	dist dist-all dist-gzip distcheck distclean distclean-generic \
+	distclean-libtool distclean-recursive distclean-tags \
+	distcleancheck distdir dvi dvi-am dvi-recursive info info-am \
+	info-recursive install install-am install-data install-data-am \
+	install-data-recursive install-exec install-exec-am \
+	install-exec-recursive install-info install-info-am \
+	install-info-recursive install-man install-recursive \
+	install-strip installcheck installcheck-am installcheck-local \
+	installdirs installdirs-am installdirs-recursive \
+	maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local mostlyclean-recursive \
+	tags tags-recursive uninstall uninstall-am uninstall-info-am \
+	uninstall-info-recursive uninstall-recursive
+
+
+# Let automake worry about Makefiles and configure components being up-to-
+# date.
+#
+#
+# The following rules insure that the Makefile is up-to-date by rerunning
+# various autoconf components (although not all versions of make assume
+# that the makefile is implicitly a target).  We use time stamp files to
+# keep track of the most recent update of H5config.h.in and H5config.h
+# because autoheader and config.status don't update the modification time
+# if the contents don't change.
+# Invoke it by "gmake reconfigure".
+#
+# Graphically, the dependencies are:
+#
+#                       configure.in
+#                           |  |
+#         +-----------------+  +------------+
+#         |                                 |
+#      stamp1                           configure
+#   (H5config.h.in)                         |
+#       |  |                                |
+#       |  +---------------+    +-----------+
+#       |                  |    |
+#       |               config.status
+#       |                     |
+#       |  +------------------+
+#       |  |
+#      stamp2
+#    (H5config.h)                   Makefile.in et al
+#         |                                 |
+#         +------------------+  +-----------+
+#                            |  |
+#                          Makefile
+#
+# A side effect of updating stamp1 is to generate H5config.h.in and a
+# side effect of updating stamp2 is to generate H5config.h.  When using
+# a version of make that doesn't treat the makefile as the initial target
+# the user may want to occassionally type `make Makefile' in any source
+# directory.
+# The `Makefile' target has been renamed to `reconfigure' so that the
+# autoconf and make depend processes do not start up automatically.
+# One must do `make reconfigure' explicitedly to start the process.
+# (When srcdir is used and if more than one machines are running,
+# this automatic Makefile/autoconf can get things unstable.)
+#
+#STAMP1=$(top_builddir)/config/stamp1
+#STAMP2=$(top_builddir)/config/stamp2
+
+#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
+#               $(top_srcdir)/config/commence.am \
+#               $(top_srcdir)/config/conclude.am
+
+#$(STAMP1): $(top_srcdir)/configure.in
+#	touch $(STAMP1)
+#	-cd $(top_srcdir); autoheader
+
+#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
+#	touch $(STAMP2)
+#	-cd $(top_builddir); \
+#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
+
+# Automake supplies a rule to generate configure
+
+#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
+#	-cd $(top_builddir); ./config.status --recheck
+
+# rerun the autoconf process if any configure components have changed. 
+#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
+#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
+#	@for sub in @subdirs@ dummy; do                                 \
+#	  if test $$sub != dummy; then                                  \
+#	    -cd $$sub; $(MAKE) reconfigure;                             \
+#	  fi;                                                           \
+#	done;
+
+#-----------------------------------------------------------------------------
+# The following section of this makefile comes from the middle of
+# `Makefile.am' from this directory.
+# It was generated by running automake on `Makefile.am' to create
+# `Makefile.in', then running `config.status' to create this Makefile.
+#-----------------------------------------------------------------------------
+
+# Define rules for lib, progs, check, and tests.
+# These simply involve recursing into subdirectories.
+test _test: check
+
+lib progs:
+	@@SETX@; for d in $(SUBDIRS); do                                \
+          if test $$d != .; then                                        \
+	   (cd $$d && $(MAKE) $@) || exit 1;                            \
+          fi;                                                           \
 	done
-	@$(MAKE) install
-	@$(MAKE) install-doc
-	@$(LT) --mode=finish $(libdir)
 
-uninstall-all:
-	@$(MAKE) uninstall
-	@$(MAKE) uninstall-doc
+# Make all and make tests also create tests in perform directory
+all-local:
+	cd perform && $(MAKE) all
+tests:
+	@@SETX@; for d in $(SUBDIRS) perform; do                        \
+          if test $$d != .; then                                        \
+	   (cd $$d && $(MAKE) $@) || exit 1;                            \
+          fi;                                                           \
+	done
 
-install:
-	@@SETX@; for d in $(SUBDIRS); do				      \
-	   (cd $$d && $(MAKE) $@) || exit 1;				      \
+# Clean and mostlyclean need to recurse into docs, examples, and perform
+# directories unless they've already been distcleaned.
+clean-local:
+	@@SETX@; for d in docs examples perform; do                     \
+	  if test -f $$d/Makefile; then                                 \
+	    (cd $$d && $(MAKE) clean) || exit 1;                        \
+	  fi;                                                           \
 	done
-	@$(MAKE) install-examples
-	@$(LT) --mode=finish $(libdir)
 
-install-examples:
-	@@SETX@; for d in examples @HDF5_INTERFACES@; do		      \
-	    (cd $$d && $(MAKE) $@) || exit 1;				      \
+mostlyclean-local:
+	@@SETX@; for d in docs examples perform; do                     \
+	  if test -f $$d/Makefile; then                                 \
+	    (cd $$d && $(MAKE) mostlyclean) || exit 1;                  \
+	  fi;                                                           \
 	done
 
-uninstall-examples:
-	@@SETX@; for d in examples @HDF5_INTERFACES@; do		      \
-	    (cd $$d && $(MAKE) $@) || exit 1;				      \
+# 'make install-all' also installs docs and examples
+install-all:
+	$(MAKE) install
+	$(MAKE) install-doc
+uninstall-all:
+	$(MAKE) uninstall
+	$(MAKE) uninstall-doc
+
+# Install examples in this directory and recursively
+install-examples uninstall-examples:
+	@@SETX@; for d in examples $(HDF5_INTERFACES); do               \
+	    (cd $$d && $(MAKE) $@) || exit 1;                           \
 	done
 
+# Install documentation and examples
 install-doc:
-	@$(MAKE) install-examples
+	$(MAKE) install-examples
 	(cd doc && $(MAKE) $@) || exit 1;
 
 uninstall-doc:
-	@$(MAKE) uninstall-examples
+	$(MAKE) uninstall-examples
 	(cd doc && $(MAKE) $@) || exit 1;
 
-## Check if installation is correct by checking if examples can be built.
-## This requires a proper "make install" has been done.
+# `make check-install' or `make installcheck' checks that examples can 
+#  be successfully built
 check-install:
-	(cd examples && $(MAKE) check) || exit 1
-	@@SETX@; for d in dummy @HDF5_INTERFACES@; do			      \
-	  if test $$d != "dummy"; then					      \
-	    (cd $$d && $(MAKE) $@) || exit 1;				      \
-	  fi;								      \
-	done
-
-## Number format detection
-H5detect: 
-	(cd src && $(MAKE) $@)
-
-H5Tinit.c: 
-	(cd src && $(MAKE) $@)
-
-.PHONY: all lib progs test _test install uninstall dep depend clean           \
-	mostlyclean distclean maintainer-clean
+	$(MAKE) installcheck
 
-clean mostlyclean:
-	@@SETX@; for d in $(SUBDIRS) doc perform examples; do		      \
-	   (cd $$d && $(MAKE) $@);					      \
-	done
-	-$(RM) conftest conftest.c
-
-distclean:
-	@@SETX@; for d in $(SUBDIRS) doc perform examples; do		      \
-	   (cd $$d && $(MAKE) $@);					      \
-	done
-	-$(RM) config/commence config/conclude
-	-$(RM) config/stamp1 config/stamp2 config/depend?
-	-$(RM) config.cache config.log config.status configure.lineno
-	-$(RM) src/H5config.h src/H5pubconf.h
-	-$(RM) libtool Makefile
-
-maintainer-clean:
-	@echo "This target is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	@@SETX@; for d in $(SUBDIRS) doc perform examples; do		      \
-	   (cd $$d && $(MAKE) $@);					      \
-	done
-	-$(RM) config.cache config.log config.status src/H5config.h
-	-$(RM) configure src/H5config.h.in
+installcheck-local:
+	(cd examples && $(MAKE) $@) || exit 1;
 
+# Don't include conclude.am in root Makefile; tests target needs to
+# recurse into perform directory as well as reguar subdirs.
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: