Updates for HDF5 1.13.3 release October 26, 2022 (#2191)

* Updates for HDF5 1.13.3 release October 26, 2022
    Updated so numbers for release
    Set version to 1.13.2
    Switch default build mode to production for release in configure.ac,
           lines 435 and 442.
    Switch AM_MAINTAINER_MODE to disabled with bin/switch_maint_mode
    Set HDF5_GENERATE_HEADERS to OFF in src/CMakeLists.txt.
    Commit Makefile.ins and other generated files for release
           except 2 ...~ files and autom4te.cache.

* Add files generated by autotools to exclude list for codespell.

1 files changed, 1290 insertions, 0 deletions

diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..d30ff41
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,1290 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://www.hdfgroup.org/licenses.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
+#
+# This makefile mostly just reinvokes make in the various subdirectories
+# but does so in the correct order.  You can alternatively invoke make from
+# each subdirectory manually.
+#
+# Top-level HDF5 Makefile(.in)
+
+# pmake has issues if variables are undefined.  Solve this problem in
+# top-level Makefile by defining .MAKEFLAGS target to -V before pmake can
+# encounter any undefined variables.
+# Automake resists putting anything but variable definitions first in
+# a Makefile.in, so we'll put a placebo comment here and use sed in
+# bin/reconfigure to turn it into the .MAKEFLAGS target.  Sigh.  -JL 2005
+# Configure should set AM_MAKEFLAGS to -V to solve this problem in
+# subdirectories.
+# NOTE: This means that invoking pmake in a subdirectory will not work.
+#xxx.MAKEFLAGS:@AM_MAKEFLAGS@
+#xxx	$(MAKE) all
+#xxx
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_fc.m4 \
+	$(top_srcdir)/m4/ax_check_class.m4 \
+	$(top_srcdir)/m4/ax_check_classpath.m4 \
+	$(top_srcdir)/m4/ax_check_java_home.m4 \
+	$(top_srcdir)/m4/ax_check_junit.m4 \
+	$(top_srcdir)/m4/ax_java_options.m4 \
+	$(top_srcdir)/m4/ax_jni_include_dir.m4 \
+	$(top_srcdir)/m4/ax_prog_doxygen.m4 \
+	$(top_srcdir)/m4/ax_prog_jar.m4 \
+	$(top_srcdir)/m4/ax_prog_java.m4 \
+	$(top_srcdir)/m4/ax_prog_java_works.m4 \
+	$(top_srcdir)/m4/ax_prog_javac.m4 \
+	$(top_srcdir)/m4/ax_prog_javac_works.m4 \
+	$(top_srcdir)/m4/ax_prog_javadoc.m4 \
+	$(top_srcdir)/m4/ax_try_compile_java.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = doxygen/Doxyfile utils/subfiling_vfd/h5fuse.sh
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/bin/compile \
+	$(top_srcdir)/bin/config.guess $(top_srcdir)/bin/config.sub \
+	$(top_srcdir)/bin/install-sh $(top_srcdir)/bin/ltmain.sh \
+	$(top_srcdir)/bin/missing $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/doxygen/Doxyfile.in \
+	$(top_srcdir)/utils/subfiling_vfd/h5fuse.sh.in COPYING
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_JAVACFLAGS = @AM_JAVACFLAGS@
+AM_JAVAFLAGS = @AM_JAVAFLAGS@
+AM_JNIFLAGS = @AM_JNIFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AR_FLAGS = @AR_FLAGS@
+ASSERTS = @ASSERTS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_MODE = @BUILD_MODE@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLANG_SANITIZE_CHECKS = @CLANG_SANITIZE_CHECKS@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DESIRED_FILE_LOCKING = @DESIRED_FILE_LOCKING@
+DIAGS = @DIAGS@
+DIMENSION_SCALES_WITH_NEW_REF = @DIMENSION_SCALES_WITH_NEW_REF@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DOXYGEN_DIR = @DOXYGEN_DIR@
+DOXYGEN_EXAMPLES_DIRECTORY = @DOXYGEN_EXAMPLES_DIRECTORY@
+DOXYGEN_EXTERNAL_SEARCH = @DOXYGEN_EXTERNAL_SEARCH@
+DOXYGEN_HTML_EXTRA_FILES = @DOXYGEN_HTML_EXTRA_FILES@
+DOXYGEN_HTML_EXTRA_STYLESHEET = @DOXYGEN_HTML_EXTRA_STYLESHEET@
+DOXYGEN_HTML_FOOTER = @DOXYGEN_HTML_FOOTER@
+DOXYGEN_HTML_HEADER = @DOXYGEN_HTML_HEADER@
+DOXYGEN_INCLUDE_ALIASES = @DOXYGEN_INCLUDE_ALIASES@
+DOXYGEN_INPUT_DIRECTORY = @DOXYGEN_INPUT_DIRECTORY@
+DOXYGEN_LAYOUT_FILE = @DOXYGEN_LAYOUT_FILE@
+DOXYGEN_MACRO_EXPANSION = @DOXYGEN_MACRO_EXPANSION@
+DOXYGEN_OPTIMIZE_OUTPUT_FOR_C = @DOXYGEN_OPTIMIZE_OUTPUT_FOR_C@
+DOXYGEN_OUTPUT_DIRECTORY = @DOXYGEN_OUTPUT_DIRECTORY@
+DOXYGEN_PACKAGE = @DOXYGEN_PACKAGE@
+DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@
+DOXYGEN_PREDEFINED = @DOXYGEN_PREDEFINED@
+DOXYGEN_PROJECT_BRIEF = @DOXYGEN_PROJECT_BRIEF@
+DOXYGEN_PROJECT_LOGO = @DOXYGEN_PROJECT_LOGO@
+DOXYGEN_SEARCHENGINE_URL = @DOXYGEN_SEARCHENGINE_URL@
+DOXYGEN_SERVER_BASED_SEARCH = @DOXYGEN_SERVER_BASED_SEARCH@
+DOXYGEN_STRIP_FROM_INC_PATH = @DOXYGEN_STRIP_FROM_INC_PATH@
+DOXYGEN_STRIP_FROM_PATH = @DOXYGEN_STRIP_FROM_PATH@
+DOXYGEN_TAG_FILE = @DOXYGEN_TAG_FILE@
+DOXYGEN_VERSION_STRING = @DOXYGEN_VERSION_STRING@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+DX_CONFIG = @DX_CONFIG@
+DX_DOCDIR = @DX_DOCDIR@
+DX_DOT = @DX_DOT@
+DX_DOXYGEN = @DX_DOXYGEN@
+DX_DVIPS = @DX_DVIPS@
+DX_EGREP = @DX_EGREP@
+DX_ENV = @DX_ENV@
+DX_FLAG_chi = @DX_FLAG_chi@
+DX_FLAG_chm = @DX_FLAG_chm@
+DX_FLAG_doc = @DX_FLAG_doc@
+DX_FLAG_dot = @DX_FLAG_dot@
+DX_FLAG_html = @DX_FLAG_html@
+DX_FLAG_man = @DX_FLAG_man@
+DX_FLAG_pdf = @DX_FLAG_pdf@
+DX_FLAG_ps = @DX_FLAG_ps@
+DX_FLAG_rtf = @DX_FLAG_rtf@
+DX_FLAG_xml = @DX_FLAG_xml@
+DX_HHC = @DX_HHC@
+DX_LATEX = @DX_LATEX@
+DX_MAKEINDEX = @DX_MAKEINDEX@
+DX_PDFLATEX = @DX_PDFLATEX@
+DX_PERL = @DX_PERL@
+DX_PROJECT = @DX_PROJECT@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5DWALK_CPPFLAGS = @H5DWALK_CPPFLAGS@
+H5DWALK_LDFLAGS = @H5DWALK_LDFLAGS@
+H5DWALK_LIBS = @H5DWALK_LIBS@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CLASSPATH = @H5_CLASSPATH@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_IS_DARWIN = @H5_IS_DARWIN@
+H5_JAVACFLAGS = @H5_JAVACFLAGS@
+H5_JAVAFLAGS = @H5_JAVAFLAGS@
+H5_JNIFLAGS = @H5_JNIFLAGS@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_TEST_BUILDDIR = @H5_TEST_BUILDDIR@
+H5_UTILS_TEST_BUILDDIR = @H5_UTILS_TEST_BUILDDIR@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_LIBHDFS = @HAVE_LIBHDFS@
+HAVE_MERCURY = @HAVE_MERCURY@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_DOXYGEN = @HDF5_DOXYGEN@
+HDF5_HL = @HDF5_HL@
+HDF5_HL_TOOLS = @HDF5_HL_TOOLS@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF5_TESTS = @HDF5_TESTS@
+HDF5_TOOLS = @HDF5_TOOLS@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HDF_JAVA = @HDF_JAVA@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HL_TOOLS = @HL_TOOLS@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+IGNORE_DISABLED_FILE_LOCKS = @IGNORE_DISABLED_FILE_LOCKS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+INTERNAL_DEBUG_OUTPUT = @INTERNAL_DEBUG_OUTPUT@
+JAR = @JAR@
+JAVA = @JAVA@
+JAVAC = @JAVAC@
+JAVACFLAGS = @JAVACFLAGS@
+JAVADOC = @JAVADOC@
+JAVAFLAGS = @JAVAFLAGS@
+JAVAPREFIX = @JAVAPREFIX@
+JAVA_JUNIT = @JAVA_JUNIT@
+JAVA_PATH_NAME = @JAVA_PATH_NAME@
+JAVA_VERSION = @JAVA_VERSION@
+JNIFLAGS = @JNIFLAGS@
+JNI_LDFLAGS = @JNI_LDFLAGS@
+JUNIT = @JUNIT@
+LARGE_PARALLEL_IO = @LARGE_PARALLEL_IO@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MAP_API = @MAP_API@
+MEMORYALLOCSANITYCHECK = @MEMORYALLOCSANITYCHECK@
+MIRROR_VFD = @MIRROR_VFD@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OPTIMIZATION = @OPTIMIZATION@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PAC_FORTRAN_NUM_INTEGER_KINDS = @PAC_FORTRAN_NUM_INTEGER_KINDS@
+PARALLEL = @PARALLEL@
+PARALLEL_FILTERED_WRITES = @PARALLEL_FILTERED_WRITES@
+PARALLEL_TOOLS = @PARALLEL_TOOLS@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PREADWRITE = @PREADWRITE@
+PROFILING = @PROFILING@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+ROS3_VFD = @ROS3_VFD@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+SUBFILING_VFD = @SUBFILING_VFD@
+SYMBOLS = @SYMBOLS@
+TESTPARALLEL = @TESTPARALLEL@
+TESTS_JUNIT = @TESTS_JUNIT@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILE_LOCKING = @USE_FILE_LOCKING@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+_ACJNI_JAVAC = @_ACJNI_JAVAC@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+examplesdir = @examplesdir@
+exec_prefix = @exec_prefix@
+fmoddir = @fmoddir@
+fortran_linux_linker_option = @fortran_linux_linker_option@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5JNI = $(top_builddir)/java/src/jni/libhdf5_java.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below
+# has been removed. According to the official description of DESTDIR by GNU at
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is
+# prepended to the normal and complete install path that it precedes for the
+# purpose of installing in a temporary directory which is useful for building
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the
+# path then begins with '//', which is incorrect and causes problems at least for
+# Cygwin.
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Some files/directories generated during check that should be cleaned
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *-tmp
+@BUILD_CXX_CONDITIONAL_FALSE@CXX_DIR = 
+
+# Define subdirectories to build.
+# Add this directory to SUBDIRS so that examples get built after tools
+# but before examples in extra interfaces (c++ and fortran).
+# Since we're explicitly listing DIST_SUBDIRS, we also need to list
+# directories that are only conditionally built (so that their Makefiles
+# are cleaned as well).
+# Note that `make clean' will not affect the examples or doc directories.
+
+# Conditionals.  These conditionals are defined during configure
+# Define each variable to empty if it is not used to placate pmake
+@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
+@BUILD_FORTRAN_CONDITIONAL_FALSE@FORTRAN_DIR = 
+@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
+@BUILD_JAVA_CONDITIONAL_FALSE@JAVA_DIR = 
+@BUILD_JAVA_CONDITIONAL_TRUE@JAVA_DIR = java
+@BUILD_HDF5_HL_CONDITIONAL_FALSE@HDF5_HL_DIR = 
+@BUILD_HDF5_HL_CONDITIONAL_TRUE@HDF5_HL_DIR = hl
+@BUILD_TESTS_CONDITIONAL_FALSE@TESTSERIAL_DIR = 
+@BUILD_TESTS_CONDITIONAL_TRUE@TESTSERIAL_DIR = test
+@BUILD_TESTS_PARALLEL_CONDITIONAL_FALSE@TESTPARALLEL_DIR = 
+@BUILD_TESTS_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar
+@BUILD_TOOLS_CONDITIONAL_FALSE@TOOLS_DIR = 
+@BUILD_TOOLS_CONDITIONAL_TRUE@TOOLS_DIR = tools
+SUBDIRS = src $(TESTSERIAL_DIR) $(TESTPARALLEL_DIR) bin $(TOOLS_DIR) utils . \
+          $(CXX_DIR) $(FORTRAN_DIR) $(JAVA_DIR) $(HDF5_HL_DIR)
+
+DIST_SUBDIRS = src test testpar tools utils . c++ fortran hl examples java
+
+# Some files generated during configure that should be cleaned
+DISTCLEANFILES = config/stamp1 config/stamp2
+all: all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(am__empty):
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+doxygen/Doxyfile: $(top_builddir)/config.status $(top_srcdir)/doxygen/Doxyfile.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+utils/subfiling_vfd/h5fuse.sh: $(top_builddir)/config.status $(top_srcdir)/utils/subfiling_vfd/h5fuse.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am: installcheck-local
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am clean clean-cscope clean-generic \
+	clean-libtool cscope cscopelist-am ctags ctags-am dist \
+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-generic \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installcheck-local \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
+	tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+	build-tests check-clean check-install check-p check-s check-vfd \
+	check-passthrough-vol install-doc lib progs tests uninstall-doc \
+	_exec_check-s _test help trace doxygen
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# include Doxygen rules (requires autoconf-archive >2016-03-20)
+@DX_RULES@
+
+# Define rules for lib, progs, check, and tests.
+# These simply involve recursing into subdirectories.
+test _test: check
+
+lib progs check-p check-s:
+	for d in $(SUBDIRS); do                                \
+	  if test $$d != .; then                                        \
+	   (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;            \
+	  fi;                                                           \
+	done
+
+# Make all, tests, and (un)install
+tests:
+	for d in $(SUBDIRS); do                        \
+	  if test $$d != .; then                                        \
+	   (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;            \
+	  fi;                                                           \
+	  done
+
+# Check-clean also recurses into examples directory
+check-clean:
+	for d in $(SUBDIRS) examples; do               \
+	  if test $$d != .; then                                        \
+	   (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;            \
+	  fi;                                                           \
+	done
+	$(RM) -rf prefix-tmp destdir-tmp
+
+# Some C++ compilers/linkers will create a directory named ii_files in
+# the root directory, which should be cleaned.
+mostlyclean-local:
+	if test -d ii_files; then                                       \
+	  $(RM) -rf ii_files;                                           \
+	fi
+
+# 'make install' will now install examples, the same as 'make install-all'.
+# 'make-install-all' will be redundant but will still work.
+install: install-recursive install-examples
+uninstall: uninstall-recursive uninstall-examples
+
+# 'make install-all' also installs examples
+install-all:
+	@$(MAKE) $(AM_MAKEFLAGS) install
+uninstall-all:
+	@$(MAKE) $(AM_MAKEFLAGS) uninstall
+
+# Install examples in this directory and recursively
+install-examples uninstall-examples:
+	for d in examples $(HDF5_INTERFACES) $(HL); do               \
+	    (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;           \
+	done
+
+# Placeholder to remind users that docs are now in a separate repository.
+install-doc:
+	@echo "docs no longer live in this tree.  Use install-examples to install examples."
+
+uninstall-doc:
+	@echo "docs no longer live in this tree.  Use install-examples to install examples."
+
+# `make check-install' or `make installcheck' checks that examples can
+#  be successfully built
+installcheck-local:
+	if test -n "${DESTDIR}"; then                                  \
+          (cd ${DESTDIR}$(bindir) && pwd && ./h5redeploy -force);     \
+        fi
+	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# check-all-install tests all installation methods.
+# Install via different mechanism and then compare against the default.
+# Fine if only libXXX.a files are different since they may have been ranlib'ed.
+check-all-install:
+	@echo Installing to default location
+	$(MAKE) install
+	@echo Installing to different prefix location
+	$(MAKE) prefix=${ROOT}/prefix-tmp install
+	@echo Compare against the default installation.
+	@echo Fine if only libXXX.a files are different.
+	-diff -r prefix-tmp ${prefix}
+	@echo Installing to different $$\DESTDIR location
+	env DESTDIR=${ROOT}/destdir-tmp $(MAKE) install
+	@echo Compare against the default installation.
+	@echo Fine if only libXXX.a files are different.
+	-diff -r destdir-tmp${prefix} ${prefix}
+
+# Only source files in the src directory include tracing information,
+# so 'make trace' only needs to recurse into that directory.
+trace:
+	@(cd src && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
+
+# doxygen support
+@BUILD_DOXYGEN_CONDITIONAL_TRUE@doxygen: doxygen-doc
+
+# Run tests with different Virtual File Drivers.
+# Currently, only invoke check-vfd in the test directory.
+check-vfd:
+	for d in src utils test; do                                     \
+	  if test $$d != .; then                                        \
+	    (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;           \
+	  fi;                                                           \
+	done
+
+# Run tests with different passthrough Virtual Object Layer Connectors.
+# NOTE: Will only succeed with passthrough VOL connectors that use
+#       the native VOL connector as the terminal connector.
+check-passthrough-vol:
+	for d in $(SUBDIRS); do                                \
+	  if test $$d != .; then                                       \
+	    (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;          \
+	  fi;                                                          \
+	done
+
+# Automake wants to make config.status depend on configure.  This
+# makes sense, but config.status can't always be regenerated
+# properly, which can cause builds to fail.
+# This is a problem for our Daily Tests, which need to be able to
+# 'make distclean' reliably before running configure.
+# The simple solution is to override the dependency Automake supplies
+# for config.status so that it will never be regenerated.
+$(top_builddir)/config.status:
+
+# Don't include conclude.am in root Makefile; tests target needs to
+# recurse into reguar subdirs.
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: