[svn-r1112] Changes since 19990301

----------------------

./INSTALL
	Reorganized and added some additional examples.

./MANIFEST
./aclocal.m4			[NEW]
./configure.in
./configure			[REGENERATED]
./src/H5config.h.in		[REGENERATED]
./bin/ltconfig			[NEW]
./bin/ltmain.sh			[NEW]
	Added tests to determine how to compile shared libraries and
	how to link programs with them before the libraries are
	installed.  Also how to install and uninstall shared
	libraries. The configure step also prints the names of the
	config files it's trying to load for easier debugging.

./bin/config.guess
./bin/config.sub
	Replaced with a newer version from GNU.  The changes we made
	to that file to report `irix6.x' and `FreeBSD' without version
	numbers have been incorporated into configure.in instead.  In
	the future, do not change these two files (see the top of
	configure.in instead). By the way, this update was required to
	get shared libraries working.

./config/linux			[REMOVED]
./config/linux-gnulibc1		[NEW]
./config/linux-gnu		[NEW]
./config/alpha-dec		[REMOVED]
./config/alpha-dec-osf4.0	[REMOVED]
./config/dec-osf4.x		[NEW]
./config/irix5.3		[REMOVED]
./config/irix5.x		[NEW]
./config/irix64			[REMOVED]
./config/freebsd
	Moved config files around to agree with output from the new
	config.guess.  The linux file was split into gnu (RedHat),
	gnulibc1, and gnulibc2 versions. The alpha-dec file was
	removed (I think it was unused) and the alpha-dec-osf4.0 was
	changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
	the irix64 file was renamed to irix6.x. The freebsd file was
	changed to point to linux-gnulibc1. These changes were tested
	on:

		Linux 2.0
		Linux 2.1
		FreeBSD 3.2
		Irix 5.3
		Irix64 6.2
		Irix64 6.4
		HP/UX 10.20
		OSF1 4.0

./config/alphaev56-dec-osf4.x
./config/irix64
	Added warnings similar to linux/freebsd about using compilers
	with known bugs.

./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
	Added definitions for shared libraries. This has been tested
	on the following systems:

		Linux 2.0
		Linux 2.1
		FreeBSD 3.2
		Irix 5.3
		Irix64 6.2
		Irix64 6.4
		HP/UX 10.20		static only
		OSF1 4.0

	If you want to disable use of shared libraries (you probably
	do for development purposes since it takes a lot longer to
	compile and because you have to run dynamically linked
	programs in a special way if the library hasn't been
	installed) then add `--disable-shared' to the configure
	command line.  This is all documented in the INSTALL file.

./bin/release
	Temprarily commented out the MANIFEST checking when running
	under svf since svf is about to be replaced by a newer
	version.  This change only affects error checking during the
	release process.

./Makefile.dist
./Makefile.in
	Added `make check' which does the same thing as `make _test'
	since the former is endorsed by the GNU coding style and
	people are used to it.  The old `make _test' still works too
	(and so does `make test' if you use GNU make).

1 files changed, 2453 insertions, 0 deletions

diff --git a/bin/ltmain.sh b/bin/ltmain.sh
new file mode 100644
index 0000000..e9350b3
--- /dev/null
+++ b/bin/ltmain.sh
@@ -0,0 +1,2453 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996-1998 Free Software Foundation, Inc.
+# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.2
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+
+if test "$LTCONFIG_VERSION" != "$VERSION"; then
+  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  echo "$modename: not configured to build any kind of library" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+  arg="$1"
+  shift
+
+  case "$arg" in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case "$prev" in
+    execute_dlfiles)
+      eval "$prev=\"\$$prev \$arg\""
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case "$arg" in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "$PROGRAM (GNU $PACKAGE) $VERSION"
+    exit 0
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+    exit 0
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --quiet | --silent)
+    show=:
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+fi
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    case "$nonopt" in
+    *cc | *++ | gcc* | *-gcc*)
+      mode=link
+      for arg
+      do
+        case "$arg" in
+        -c)
+           mode=compile
+           break
+           ;;
+        esac
+      done
+      ;;
+    *db | *dbx)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+        if test -n "$nonopt"; then
+          $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+        else
+          $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+        fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case "$mode" in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    lastarg=
+    srcfile="$nonopt"
+    suppress_output=
+
+    for arg
+    do
+      # Accept any command-line options.
+      case "$arg" in
+      -o)
+	$echo "$modename: you cannot specify the output filename with \`-o'" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+      esac
+
+      # Accept the current argument as the source file.
+      lastarg="$srcfile"
+      srcfile="$arg"
+
+      # Aesthetically quote the previous argument.
+
+      # Backslashify any backslashes, double quotes, and dollar signs.
+      # These are the only characters that are still specially
+      # interpreted inside of double-quoted scrings.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly in scan
+      # sets, so we specify it separately.
+      case "$lastarg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      # Add the previous argument to base_compile.
+      if test -z "$base_compile"; then
+	base_compile="$lastarg"
+      else
+	base_compile="$base_compile $lastarg"
+      fi
+    done
+
+    # Get the name of the library object.
+    libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+
+    # Recognize several different file suffixes.
+    xform='[cCFSfms]'
+    case "$libobj" in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case "$libobj" in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e 's/\.lo$/.o/'` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$srcfile'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      $run $rm $obj $libobj
+      trap "$run $rm $obj $libobj; exit 1" 1 2 15
+    else
+      $run $rm $libobj
+      trap "$run $rm $libobj; exit 1" 1 2 15
+    fi
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      # All platforms use -DPIC, to notify preprocessed assembler code.
+      $show "$base_compile$pic_flag -DPIC $srcfile"
+      if $run eval "$base_compile\$pic_flag -DPIC \$srcfile"; then :
+      else
+        test -n "$obj" && $run $rm $obj
+        exit 1
+      fi
+
+      # If we have no pic_flag, then copy the object into place and finish.
+      if test -z "$pic_flag"; then
+        $show "$LN_S $obj $libobj"
+        $run $LN_S $obj $libobj
+        exit $?
+      fi
+
+      # Just move the object, then go on to compile the next one
+      $show "$mv $obj $libobj"
+      $run $mv $obj $libobj || exit 1
+
+      # Allow error messages only from the first compilation.
+      suppress_output=' >/dev/null 2>&1'
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      # Suppress compiler output if we already did a PIC compilation.
+      $show "$base_compile $srcfile$suppress_output"
+      if $run eval "$base_compile \$srcfile$suppress_output"; then :
+      else
+        $run $rm $obj $libobj
+        exit 1
+      fi
+    fi
+
+    # Create an invalid libtool object if no PIC, so that we do not
+    # accidentally link it into a program.
+    if test "$build_libtool_libs" != yes; then
+      $show "echo timestamp > $libobj"
+      $run eval "echo timestamp > \$libobj" || exit $?
+    fi
+
+    exit 0
+    ;;
+
+  # libtool link mode
+  link)
+    modename="$modename: link"
+    CC="$nonopt"
+    allow_undefined=yes
+    compile_command="$CC"
+    finalize_command="$CC"
+
+    compile_shlibpath=
+    finalize_shlibpath=
+    deplibs=
+    dlfiles=
+    dlprefiles=
+    export_dynamic=no
+    hardcode_libdirs=
+    libobjs=
+    link_against_libtool_libs=
+    ltlibs=
+    objs=
+    prev=
+    prevarg=
+    release=
+    rpath=
+    perm_rpath=
+    temp_rpath=
+    vinfo=
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case "$arg" in
+      -all-static | -static)
+        if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+        fi
+        build_libtool_libs=no
+	build_old_libs=yes
+        break
+        ;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    for arg
+    do
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+        case "$prev" in
+        output)
+          compile_command="$compile_command @OUTPUT@"
+          finalize_command="$finalize_command @OUTPUT@"
+          ;;
+        esac
+
+        case "$prev" in
+        dlfiles|dlprefiles)
+          case "$arg" in
+          *.la | *.lo) ;;  # We handle these cases below.
+          *)
+            dlprefiles="$dlprefiles $arg"
+            test "$prev" = dlfiles && dlfiles="$dlfiles $arg"
+            prev=
+            ;;
+          esac
+          ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+        rpath)
+          rpath="$rpath $arg"
+	  prev=
+	  continue
+	  ;;
+        *)
+          eval "$prev=\"\$arg\""
+          prev=
+          continue
+          ;;
+        esac
+      fi
+
+      prevarg="$arg"
+
+      case "$arg" in
+      -all-static)
+	if test -n "$link_static_flag"; then
+          compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+        fi
+        continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -dlopen)
+        prev=dlfiles
+        continue
+        ;;
+
+      -dlpreopen)
+        prev=dlprefiles
+        continue
+        ;;
+
+      -export-dynamic)
+        if test "$export_dynamic" != yes; then
+          export_dynamic=yes
+	  if test -n "$export_dynamic_flag_spec"; then
+	    eval arg=\"$export_dynamic_flag_spec\"
+	  else
+	    arg=
+	  fi
+
+          # Add the symbol object into the linking commands.
+	  compile_command="$compile_command @SYMFILE@"
+	  finalize_command="$finalize_command @SYMFILE@"
+        fi
+        ;;
+
+      -L*)
+        dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'`
+        case "$dir" in
+        /* | [A-Za-z]:\\*)
+	  # Add the corresponding hardcode_libdir_flag, if it is not identical.
+          ;;
+        *)
+          $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2
+          exit 1
+          ;;
+        esac
+        deplibs="$deplibs $arg"
+        ;;
+
+      -l*) deplibs="$deplibs $arg" ;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+        prev=rpath
+        continue
+        ;;
+
+      -static)
+	# If we have no pic_flag, then this is the same as -all-static.
+	if test -z "$pic_flag" && test -n "$link_static_flag"; then
+          compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+        fi
+	continue
+	;;
+
+      -version-info)
+        prev=vinfo
+        continue
+        ;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+        ;;
+
+      *.o | *.a)
+        # A standard object.
+        objs="$objs $arg"
+        ;;
+
+      *.lo)
+        # A library object.
+	if test "$prev" = dlfiles; then
+	  dlfiles="$dlfiles $arg"
+	  if test "$build_libtool_libs" = yes; then
+	    prev=
+	    continue
+	  else
+	    # If libtool objects are unsupported, then we need to preload.
+	    prev=dlprefiles
+	  fi
+	fi
+
+	if test "$prev" = dlprefiles; then
+	  # Preload the old-style object.
+	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e 's/\.lo$/\.o/'`
+	  prev=
+	fi
+	libobjs="$libobjs $arg"
+        ;;
+
+      *.la)
+        # A libtool-controlled library.
+
+        dlname=
+        libdir=
+        library_names=
+        old_library=
+
+        # Check to see that this really is a libtool archive.
+        if (sed -e '2q' $arg | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
+        else
+          $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+          exit 1
+        fi
+
+        # If there is no directory component, then add one.
+        case "$arg" in
+        */* | *\\*) . $arg ;;
+        *) . ./$arg ;;
+        esac
+
+        if test -z "$libdir"; then
+          $echo "$modename: \`$arg' contains no -rpath information" 1>&2
+          exit 1
+        fi
+
+        # Get the name of the library we link against.
+        linklib=
+        for l in $old_library $library_names; do
+          linklib="$l"
+        done
+
+        if test -z "$linklib"; then
+          $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+          exit 1
+        fi
+
+        # Find the relevant object directory and library name.
+        name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
+        dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+        if test "X$dir" = "X$arg"; then
+          dir="$objdir"
+        else
+          dir="$dir/$objdir"
+        fi
+
+        # This library was specified with -dlopen.
+        if test "$prev" = dlfiles; then
+          dlfiles="$dlfiles $arg"
+          if test -z "$dlname"; then
+            # If there is no dlname, we need to preload.
+            prev=dlprefiles
+          else
+            # We should not create a dependency on this library, but we
+	    # may need any libraries it requires.
+	    compile_command="$compile_command$dependency_libs"
+	    finalize_command="$finalize_command$dependency_libs"
+            prev=
+            continue
+          fi
+        fi
+
+        # The library was specified with -dlpreopen.
+        if test "$prev" = dlprefiles; then
+          # Prefer using a static library (so that no silly _DYNAMIC symbols
+          # are required to link).
+          if test -n "$old_library"; then
+            dlprefiles="$dlprefiles $dir/$old_library"
+          else
+            dlprefiles="$dlprefiles $dir/$linklib"
+          fi
+          prev=
+        fi
+
+        if test "$build_libtool_libs" = yes && test -n "$library_names"; then
+          link_against_libtool_libs="$link_against_libtool_libs $arg"
+          if test -n "$shlibpath_var"; then
+            # Make sure the rpath contains only unique directories.
+            case "$temp_rpath " in
+            *" $dir "*) ;;
+            *) temp_rpath="$temp_rpath $dir" ;;
+            esac
+          fi
+
+	  # This is the magic to use -rpath.
+          if test -n "$hardcode_libdir_flag_spec"; then
+            if test -n "$hardcode_libdir_separator"; then
+              if test -z "$hardcode_libdirs"; then
+                # Put the magic libdir with the hardcode flag.
+                hardcode_libdirs="$libdir"
+                libdir="@HARDCODE_LIBDIRS@"
+              else
+                # Just accumulate the unique libdirs.
+		case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+		*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		  ;;
+		*)
+		  hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		  ;;
+		esac
+                libdir=
+              fi
+            fi
+
+            if test -n "$libdir"; then
+              eval flag=\"$hardcode_libdir_flag_spec\"
+
+              compile_command="$compile_command $flag"
+              finalize_command="$finalize_command $flag"
+            fi
+          elif test -n "$runpath_var"; then
+            # Do the same for the permanent run path.
+            case "$perm_rpath " in
+            *" $libdir "*) ;;
+            *) perm_rpath="$perm_rpath $libdir" ;;
+            esac
+          fi
+
+
+          case "$hardcode_action" in
+          immediate)
+            if test "$hardcode_direct" = no; then
+              compile_command="$compile_command $dir/$linklib"
+            elif test "$hardcode_minus_L" = no; then
+              compile_command="$compile_command -L$dir -l$name"
+            elif test "$hardcode_shlibpath_var" = no; then
+              compile_shlibpath="$compile_shlibpath$dir:"
+              compile_command="$compile_command -l$name"
+            fi
+            ;;
+
+          relink)
+            # We need an absolute path.
+            case "$dir" in
+            /* | [A-Za-z]:\\*) ;;
+            *)
+              absdir=`cd "$dir" && pwd`
+              if test -z "$absdir"; then
+                $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+                exit 1
+              fi
+              dir="$absdir"
+              ;;
+            esac
+
+            if test "$hardcode_direct" = yes; then
+              compile_command="$compile_command $dir/$linklib"
+            elif test "$hardcode_minus_L" = yes; then
+              compile_command="$compile_command -L$dir -l$name"
+            elif test "$hardcode_shlibpath_var" = yes; then
+              compile_shlibpath="$compile_shlibpath$dir:"
+              compile_command="$compile_command -l$name"
+            fi
+            ;;
+
+          *)
+            $echo "$modename: \`$hardcode_action' is an unknown hardcode action" 1>&2
+            exit 1
+            ;;
+          esac
+
+          # Finalize command for both is simple: just hardcode it.
+          if test "$hardcode_direct" = yes; then
+            finalize_command="$finalize_command $libdir/$linklib"
+          elif test "$hardcode_minus_L" = yes; then
+            finalize_command="$finalize_command -L$libdir -l$name"
+          elif test "$hardcode_shlibpath_var" = yes; then
+            finalize_shlibpath="$finalize_shlibpath$libdir:"
+            finalize_command="$finalize_command -l$name"
+          else
+            # We cannot seem to hardcode it, guess we'll fake it.
+            finalize_command="$finalize_command -L$libdir -l$name"
+          fi
+        else
+          # Transform directly to old archives if we don't build new libraries.
+          if test -n "$pic_flag" && test -z "$old_library"; then
+            $echo "$modename: cannot find static library for \`$arg'" 1>&2
+            exit 1
+          fi
+
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_command="$compile_command $dir/$linklib"
+	    finalize_command="$finalize_command $dir/$linklib"
+	  else
+	    compile_command="$compile_command -L$dir -l$name"
+	    finalize_command="$finalize_command -L$dir -l$name"
+	  fi
+        fi
+
+	# Add in any libraries that this one depends upon.
+	compile_command="$compile_command$dependency_libs"
+	finalize_command="$finalize_command$dependency_libs"
+	continue
+        ;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+        ;;
+      esac
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -n "$vinfo" && test -n "$release"; then
+      $echo "$modename: you cannot specify both \`-version-info' and \`-release'" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    oldlib=
+    oldobjs=
+    case "$output" in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+
+    */* | *\\*)
+      $echo "$modename: output file \`$output' must have no directory components" 1>&2
+      exit 1
+      ;;
+
+    *.a)
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      build_old_libs=yes
+      oldlib="$output"
+      $show "$rm $oldlib"
+      $run $rm $oldlib
+      ;;
+
+    *.la)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case "$output" in
+      lib*) ;;
+      *)
+	$echo "$modename: libtool library \`$arg' must begin with \`lib'" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+	;;
+      esac
+
+      name=`$echo "X$output" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+      eval libname=\"$libname_spec\"
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+      current=0
+      revision=0
+      age=0
+
+      if test -n "$objs"; then
+        $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
+        exit 1
+      fi
+
+      # How the heck are we supposed to write a wrapper for a shared library?
+      if test -n "$link_against_libtool_libs"; then
+        $echo "$modename: libtool library \`$output' may not depend on uninstalled libraries:$link_against_libtool_libs" 1>&2
+        exit 1
+      fi
+
+      if test -n "$dlfiles$dlprefiles"; then
+        $echo "$modename: warning: \`-dlopen' is ignored while creating libtool libraries" 1>&2
+        # Nullify the symbol file.
+        compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test -z "$rpath"; then
+        $echo "$modename: you must specify an installation directory with \`-rpath'" 1>&2
+	$echo "$help" 1>&2
+        exit 1
+      fi
+
+      set dummy $rpath
+      if test $# -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      # Parse the version information argument.
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
+      set dummy $vinfo
+      IFS="$save_ifs"
+
+      if test -n "$5"; then
+        $echo "$modename: too many parameters to \`-version-info'" 1>&2
+        $echo "$help" 1>&2
+        exit 1
+      fi
+
+      test -n "$2" && current="$2"
+      test -n "$3" && revision="$3"
+      test -n "$4" && age="$4"
+
+      # Check that each of the things are valid numbers.
+      case "$current" in
+      0 | [1-9] | [1-9][0-9]*) ;;
+      *)
+        $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+        $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+        exit 1
+        ;;
+      esac
+
+      case "$revision" in
+      0 | [1-9] | [1-9][0-9]*) ;;
+      *)
+        $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+        $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+        exit 1
+        ;;
+      esac
+
+      case "$age" in
+      0 | [1-9] | [1-9][0-9]*) ;;
+      *)
+        $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+        $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+        exit 1
+        ;;
+      esac
+
+      if test $age -gt $current; then
+        $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+        $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+        exit 1
+      fi
+
+      # Calculate the version variables.
+      version_vars="version_type current age revision"
+      case "$version_type" in
+      none) ;;
+
+      linux)
+        version_vars="$version_vars major versuffix"
+        major=`expr $current - $age`
+        versuffix="$major.$age.$revision"
+        ;;
+
+      osf)
+        version_vars="$version_vars versuffix verstring"
+        major=`expr $current - $age`
+        versuffix="$current.$age.$revision"
+        verstring="$versuffix"
+
+        # Add in all the interfaces that we are compatible with.
+        loop=$age
+        while test $loop != 0; do
+          iface=`expr $current - $loop`
+          loop=`expr $loop - 1`
+          verstring="$verstring:${iface}.0"
+        done
+
+        # Make executables depend on our current version.
+        verstring="$verstring:${current}.0"
+        ;;
+
+      sunos)
+        version_vars="$version_vars major versuffix"
+        major="$current"
+        versuffix="$current.$revision"
+        ;;
+
+      *)
+        $echo "$modename: unknown library version type \`$version_type'" 1>&2
+        echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+        exit 1
+        ;;
+      esac
+
+      # Create the output directory, or remove our outputs if we need to.
+      if test -d $objdir; then
+        $show "$rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*"
+        $run $rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*
+      else
+        $show "$mkdir $objdir"
+        $run $mkdir $objdir
+	status=$?
+	if test $status -eq 0 || test -d $objdir; then :
+	else
+	  exit $status
+	fi
+      fi
+
+      # Check to see if the archive will have undefined symbols.
+      if test "$allow_undefined" = yes; then
+        if test "$allow_undefined_flag" = unsupported; then
+          $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+          build_libtool_libs=no
+	  build_old_libs=yes
+        fi
+      else
+        # Don't allow undefined symbols.
+        allow_undefined_flag="$no_undefined_flag"
+      fi
+
+      # Add libc to deplibs on all systems.
+      dependency_libs="$deplibs"
+      deplibs="$deplibs -lc"
+
+      if test "$build_libtool_libs" = yes; then
+        # Get the real and link names of the library.
+        eval library_names=\"$library_names_spec\"
+        set dummy $library_names
+        realname="$2"
+        shift; shift
+
+        if test -n "$soname_spec"; then
+          eval soname=\"$soname_spec\"
+        else
+          soname="$realname"
+        fi
+
+        lib="$objdir/$realname"
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+        # Use standard objects if they are PIC.
+        test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//g'`
+
+        # Do each of the archive commands.
+        eval cmds=\"$archive_cmds\"
+        IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+        for cmd in $cmds; do
+          IFS="$save_ifs"
+          $show "$cmd"
+          $run eval "$cmd" || exit $?
+        done
+        IFS="$save_ifs"
+
+        # Create links to the real library.
+        for linkname in $linknames; do
+          $show "(cd $objdir && $LN_S $realname $linkname)"
+          $run eval '(cd $objdir && $LN_S $realname $linkname)' || exit $?
+        done
+
+        # If -export-dynamic was specified, set the dlname.
+        if test "$export_dynamic" = yes; then
+          # On all known operating systems, these are identical.
+          dlname="$soname"
+        fi
+      fi
+
+      # Now set the variables for building old libraries.
+      oldlib="$objdir/$libname.a"
+      ;;
+
+    *.lo | *.o)
+      if test -n "$link_against_libtool_libs"; then
+        $echo "$modename: error: cannot link libtool libraries into reloadable objects" 1>&2
+        exit 1
+      fi
+
+      if test -n "$deplibs"; then
+        $echo "$modename: warning: \`-l' and \`-L' are ignored while creating objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles"; then
+        $echo "$modename: warning: \`-dlopen' is ignored while creating objects" 1>&2
+        # Nullify the symbol file.
+        compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test -n "$rpath"; then
+        $echo "$modename: warning: \`-rpath' is ignored while creating objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+        $echo "$modename: warning: \`-version-info' is ignored while creating objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+        $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
+      fi
+
+      case "$output" in
+      *.lo)
+        if test -n "$objs"; then
+          $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+          exit 1
+        fi
+        libobj="$output"
+        obj=`$echo "X$output" | $Xsed -e 's/\.lo$/.o/'`
+        ;;
+      *)
+        libobj=
+        obj="$output"
+        ;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Create the old-style object.
+      reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^       ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
+
+      output="$obj"
+      eval cmds=\"$reload_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+      for cmd in $cmds; do
+        IFS="$save_ifs"
+        $show "$cmd"
+        $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      test -z "$libobj" && exit 0
+
+      if test "$build_libtool_libs" != yes; then
+        # Create an invalid libtool object if no PIC, so that we don't
+        # accidentally link it into a program.
+        $show "echo timestamp > $libobj"
+        $run eval "echo timestamp > $libobj" || exit $?
+        exit 0
+      fi
+
+      if test -n "$pic_flag"; then
+        # Only do commands if we really have different PIC objects.
+        reload_objs="$libobjs"
+        output="$libobj"
+        eval cmds=\"$reload_cmds\"
+        IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+        for cmd in $cmds; do
+          IFS="$save_ifs"
+          $show "$cmd"
+          $run eval "$cmd" || exit $?
+        done
+        IFS="$save_ifs"
+      else
+        # Just create a symlink.
+        $show "$LN_S $obj $libobj"
+        $run $LN_S $obj $libobj || exit 1
+      fi
+
+      exit 0
+      ;;
+
+    *)
+      if test -n "$vinfo"; then
+        $echo "$modename: warning: \`-version-info' is ignored while linking programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+        $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath; do
+          if test -n "$hardcode_libdir_flag_spec"; then
+            if test -n "$hardcode_libdir_separator"; then
+              if test -z "$hardcode_libdirs"; then
+                # Put the magic libdir with the hardcode flag.
+                hardcode_libdirs="$libdir"
+                libdir="@HARDCODE_LIBDIRS@"
+              else
+                # Just accumulate the unique libdirs.
+		case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+		*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		  ;;
+		*)
+		  hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		  ;;
+		esac
+                libdir=
+              fi
+            fi
+
+            if test -n "$libdir"; then
+              eval flag=\"$hardcode_libdir_flag_spec\"
+
+              compile_command="$compile_command $flag"
+              finalize_command="$finalize_command $flag"
+            fi
+          elif test -n "$runpath_var"; then
+            case "$perm_rpath " in
+            *" $libdir "*) ;;
+            *) perm_rpath="$perm_rpath $libdir" ;;
+            esac
+          fi
+	done
+      fi
+
+      # Substitute the hardcoded libdirs into the compile commands.
+      if test -n "$hardcode_libdir_separator"; then
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
+      fi
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+        # Transform all the library objects into standard objects.
+        compile_command=`$echo "X$compile_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
+        finalize_command=`$echo "X$finalize_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
+      fi
+
+      if test "$export_dynamic" = yes && test -n "$NM" && test -n "$global_symbol_pipe"; then
+        dlsyms="${output}S.c"
+      else
+        dlsyms=
+      fi
+
+      if test -n "$dlsyms"; then
+        # Add our own program objects to the preloaded list.
+        dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
+
+	# Discover the nlist of each of the dlfiles.
+        nlist="$objdir/${output}.nm"
+
+	if test -d $objdir; then
+	  $show "$rm $nlist ${nlist}T"
+	  $run $rm "$nlist" "${nlist}T"
+	else
+	  $show "$mkdir $objdir"
+	  $run $mkdir $objdir
+	  status=$?
+	  if test $status -eq 0 || test -d $objdir; then :
+	  else
+	    exit $status
+	  fi
+	fi
+
+        for arg in $dlprefiles; do
+	  $show "extracting global C symbols from \`$arg'"
+	  $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+        done
+
+        # Parse the name list into a source file.
+        $show "creating $objdir/$dlsyms"
+        if test -z "$run"; then
+	  # Make sure we at least have an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  # Try sorting and uniquifying the output.
+	  if sort "$nlist" | uniq > "$nlist"T; then
+	    mv -f "$nlist"T "$nlist"
+	    wcout=`wc "$nlist" 2>/dev/null`
+	    count=`echo "X$wcout" | $Xsed -e 's/^[ 	]*\([0-9][0-9]*\).*$/\1/'`
+	    (test "$count" -ge 0) 2>/dev/null || count=-1
+	  else
+	    $rm "$nlist"T
+	    count=-1
+	  fi
+
+	  case "$dlsyms" in
+	  "") ;;
+	  *.c)
+	    $echo > "$objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$output' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define dld_preloaded_symbol_count some_other_symbol
+#define dld_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	    if test -f "$nlist"; then
+	      sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$objdir/$dlsyms"
+	    else
+	      echo '/* NONE */' >> "$objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$objdir/$dlsyms" "\
+
+#undef dld_preloaded_symbol_count
+#undef dld_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define __ptr_t void *
+#else
+# define __ptr_t char *
+#endif
+
+/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
+int dld_preloaded_symbol_count = $count;
+
+/* The mapping between symbol names and symbols. */
+struct {
+  char *name;
+  __ptr_t address;
+}
+dld_preloaded_symbols[] =
+{\
+"
+
+	    if test -f "$nlist"; then
+	      sed 's/^\(.*\) \(.*\)$/  {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$objdir/$dlsyms" "\
+  {0, (__ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	    ;;
+
+	  *)
+	    $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	    exit 1
+	    ;;
+	  esac
+        fi
+
+        # Now compile the dynamic symbol file.
+        $show "(cd $objdir && $CC -c$no_builtin_flag \"$dlsyms\")"
+        $run eval '(cd $objdir && $CC -c$no_builtin_flag "$dlsyms")' || exit $?
+
+        # Transform the symbol file into the correct name.
+        compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
+        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
+      elif test "$export_dynamic" != yes; then
+        test -n "$dlfiles$dlprefiles" && $echo "$modename: warning: \`-dlopen' and \`-dlpreopen' are ignored without \`-export-dynamic'" 1>&2
+      else
+        # We keep going just in case the user didn't refer to
+        # dld_preloaded_symbols.  The linker will fail if global_symbol_pipe
+        # really was required.
+        $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+
+        # Nullify the symbol file.
+        compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
+        # Replace the output file specification.
+        compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+        finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+
+        # We have no uninstalled library dependencies, so finalize right now.
+        $show "$compile_command"
+        $run eval "$compile_command"
+        exit $?
+      fi
+
+      # Replace the output file specification.
+      compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'%g'`
+      finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'T%g'`
+
+      # Create the binary in the object directory, then wrap it.
+      if test -d $objdir; then :
+      else
+        $show "$mkdir $objdir"
+	$run $mkdir $objdir
+	status=$?
+	if test $status -eq 0 || test -d $objdir; then :
+	else
+	  exit $status
+	fi
+      fi
+
+      if test -n "$shlibpath_var"; then
+        # We should set the shlibpath_var
+        rpath=
+        for dir in $temp_rpath; do
+          case "$dir" in
+          /* | [A-Za-z]:\\*)
+            # Absolute path.
+            rpath="$rpath$dir:"
+            ;;
+          *)
+            # Relative path: add a thisdir entry.
+            rpath="$rpath\$thisdir/$dir:"
+            ;;
+          esac
+        done
+        temp_rpath="$rpath"
+      fi
+
+      # Delete the old output file.
+      $run $rm $output
+
+      if test -n "$compile_shlibpath"; then
+        compile_command="$shlibpath_var=\"$compile_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      if test -n "$runpath_var" && test -n "$perm_rpath"; then
+        # We should set the runpath_var.
+        rpath=
+        for dir in $perm_rpath; do
+          rpath="$rpath$dir:"
+        done
+        compile_command="$runpath_var=\"$rpath\$$runpath_var\" $compile_command"
+        finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command"
+      fi
+
+      case "$hardcode_action" in
+      relink)
+        # AGH! Flame the AIX and HP-UX people for me, will ya?
+        $echo "$modename: warning: using a buggy system linker" 1>&2
+        $echo "$modename: relinking will be required before \`$output' can be installed" 1>&2
+        ;;
+      esac
+
+      $show "$compile_command"
+      $run eval "$compile_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the finalize command for shipping.
+      finalize_command=`$echo "X$finalize_command" | $Xsed -e "$sed_quote_subst"`
+
+      # Quote $echo for shipping.
+      qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+        $rm $output
+        trap "$rm $output; exit 1" 1 2 15
+
+        $echo > $output "\
+#! /bin/sh
+
+# $output - temporary wrapper script for $objdir/$output
+# Generated by ltmain.sh - GNU $PACKAGE $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of \``pwd`'.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  link_against_libtool_libs='$link_against_libtool_libs'
+  finalize_command=\"$finalize_command\"
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" = \"$magic\"; then :
+  else
+    echo=\"$qecho\"
+    file=\"\$0\"
+  fi\
+"
+        $echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      /* | [A-Za-z]:\\*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+
+  progdir=\"\$thisdir/$objdir\"
+  program='$output'
+
+  if test -f \"\$progdir/\$program\"; then"
+
+        # Export our shlibpath_var if we have one.
+        if test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+          $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/:*\$//'\`
+
+    export $shlibpath_var
+"
+        fi
+
+        $echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+
+      # Export the path to the program.
+      PATH=\"\$progdir:\$PATH\"
+      export PATH
+
+      exec \$program \${1+\"\$@\"}
+
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+        chmod +x $output
+      fi
+      exit 0
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    if test "$build_old_libs" = "yes"; then
+      # Transform .lo files to .o files.
+      oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^   ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	eval cmds=\"$old_archive_from_new_cmds\"
+      else
+	eval cmds=\"$old_archive_cmds\"
+      fi
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+      for cmd in $cmds; do
+        IFS="$save_ifs"
+        $show "$cmd"
+        $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    fi
+
+    # Now create the libtool archive.
+    case "$output" in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.a"
+
+      $show "creating $output"
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+        $echo > $output "\
+# $output - a libtool library file
+# Generated by ltmain.sh - GNU $PACKAGE $VERSION
+
+# The name that we can dlopen(3).
+dlname='$dlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'\
+"
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $objdir && $LN_S ../$output $output)"
+      $run eval "(cd $objdir && $LN_S ../$output $output)" || exit 1
+      ;;
+    esac
+    exit 0
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional /bin/sh argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL"; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg="$nonopt"
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case "$arg" in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+        files="$files $dest"
+        dest="$arg"
+        continue
+      fi
+
+      case "$arg" in
+      -d) isdir=yes ;;
+      -f) prev="-f" ;;
+      -g) prev="-g" ;;
+      -m) prev="-m" ;;
+      -o) prev="-o" ;;
+      -s)
+        stripme=" -s"
+        continue
+        ;;
+      -*) ;;
+
+      *)
+        # If the previous option needed an argument, then skip it.
+        if test -n "$prev"; then
+          prev=
+        else
+          dest="$arg"
+          continue
+        fi
+        ;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+        $echo "$modename: no file or destination specified" 1>&2
+      else
+        $echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test -n "$isdir"; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test $# -gt 2; then
+        $echo "$modename: \`$dest' is not a directory" 1>&2
+        $echo "$help" 1>&2
+        exit 1
+      fi
+    fi
+    case "$destdir" in
+    /* | [A-Za-z]:\\*) ;;
+    *)
+      for file in $files; do
+        case "$file" in
+        *.lo) ;;
+        *)
+          $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+          $echo "$help" 1>&2
+          exit 1
+          ;;
+        esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case "$file" in
+      *.a)
+        # Do the static libraries later.
+        staticlibs="$staticlibs $file"
+        ;;
+
+      *.la)
+        # Check to see that this really is a libtool archive.
+        if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
+        else
+          $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+          $echo "$help" 1>&2
+          exit 1
+        fi
+
+        library_names=
+        old_library=
+        # If there is no directory component, then add one.
+        case "$file" in
+        */* | *\\*) . $file ;;
+        *) . ./$file ;;
+        esac
+
+        # Add the libdir to current_libdirs if it is the destination.
+        if test "X$destdir" = "X$libdir"; then
+          case "$current_libdirs " in
+          *" $libdir "*) ;;
+          *) current_libdirs="$current_libdirs $libdir" ;;
+          esac
+        else
+          # Note the libdir as a future libdir.
+          case "$future_libdirs " in
+          *" $libdir "*) ;;
+          *) future_libdirs="$future_libdirs $libdir" ;;
+          esac
+        fi
+
+        dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
+        test "X$dir" = "X$file/" && dir=
+        dir="$dir$objdir"
+
+        # See the names of the shared library.
+        set dummy $library_names
+        if test -n "$2"; then
+          realname="$2"
+          shift
+          shift
+
+          # Install the shared library and build the symlinks.
+          $show "$install_prog $dir/$realname $destdir/$realname"
+          $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
+          test "X$dlname" = "X$realname" && dlname=
+
+          if test $# -gt 0; then
+            # Delete the old symlinks.
+            rmcmd="$rm"
+            for linkname
+            do
+              rmcmd="$rmcmd $destdir/$linkname"
+            done
+            $show "$rmcmd"
+            $run $rmcmd
+
+            # ... and create new ones.
+            for linkname
+            do
+              test "X$dlname" = "X$linkname" && dlname=
+              $show "(cd $destdir && $LN_S $realname $linkname)"
+              $run eval "(cd $destdir && $LN_S $realname $linkname)"
+            done
+          fi
+
+          if test -n "$dlname"; then
+            # Install the dynamically-loadable library.
+            $show "$install_prog $dir/$dlname $destdir/$dlname"
+            $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $?
+          fi
+
+          # Do each command in the postinstall commands.
+          lib="$destdir/$realname"
+          eval cmds=\"$postinstall_cmds\"
+          IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+          for cmd in $cmds; do
+            IFS="$save_ifs"
+            $show "$cmd"
+            $run eval "$cmd" || exit $?
+          done
+          IFS="$save_ifs"
+        fi
+
+        # Install the pseudo-library for information purposes.
+        name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+        $show "$install_prog $file $destdir/$name"
+        $run eval "$install_prog $file $destdir/$name" || exit $?
+
+        # Maybe install the static library, too.
+        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+        ;;
+
+      *.lo)
+        # Install (i.e. copy) a libtool object.
+
+        # Figure out destination file name, if it wasn't already specified.
+        if test -n "$destname"; then
+          destfile="$destdir/$destname"
+        else
+          destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+          destfile="$destdir/$destfile"
+        fi
+
+        # Deduce the name of the destination old-style object file.
+        case "$destfile" in
+        *.lo)
+          staticdest=`$echo "X$destfile" | $Xsed -e 's/\.lo$/\.o/'`
+          ;;
+        *.o)
+          staticdest="$destfile"
+          destfile=
+          ;;
+        *)
+          $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+          $echo "$help" 1>&2
+          exit 1
+          ;;
+        esac
+
+        # Install the libtool object if requested.
+        if test -n "$destfile"; then
+          $show "$install_prog $file $destfile"
+          $run eval "$install_prog $file $destfile" || exit $?
+        fi
+
+        # Install the old object if enabled.
+        if test "$build_old_libs" = yes; then
+          # Deduce the name of the old-style object file.
+          staticobj=`$echo "X$file" | $Xsed -e 's/\.lo$/\.o/'`
+
+          $show "$install_prog $staticobj $staticdest"
+          $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+        fi
+        exit 0
+        ;;
+
+      *)
+        # Do a test to see if this is really a libtool program.
+        if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
+          link_against_libtool_libs=
+          finalize_command=
+
+          # If there is no directory component, then add one.
+          case "$file" in
+          */* | *\\*) . $file ;;
+          *) . ./$file ;;
+          esac
+
+          # Check the variables that should have been set.
+          if test -z "$link_against_libtool_libs" || test -z "$finalize_command"; then
+            $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+            exit 1
+          fi
+
+          finalize=yes
+          for lib in $link_against_libtool_libs; do
+            # Check to see that each library is installed.
+            libdir=
+            if test -f "$lib"; then
+              # If there is no directory component, then add one.
+              case "$lib" in
+              */* | *\\*) . $lib ;;
+              *) . ./$lib ;;
+              esac
+            fi
+            libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
+            if test -z "$libdir"; then
+              $echo "$modename: warning: \`$lib' contains no -rpath information" 1>&2
+            elif test -f "$libfile"; then :
+            else
+              $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+              finalize=no
+            fi
+          done
+
+          if test "$hardcode_action" = relink; then
+            if test "$finalize" = yes; then
+              $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2
+              $show "$finalize_command"
+              if $run eval "$finalize_command"; then :
+              else
+                $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+                continue
+              fi
+              file="$objdir/$file"T
+            else
+              $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2
+            fi
+          else
+            # Install the binary that we compiled earlier.
+	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+          fi
+        fi
+
+        $show "$install_prog$stripme $file $dest"
+        $run eval "$install_prog\$stripme \$file \$dest" || exit $?
+        ;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      # Do each command in the postinstall commands.
+      eval cmds=\"$old_postinstall_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+      for cmd in $cmds; do
+        IFS="$save_ifs"
+        $show "$cmd"
+        $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec $SHELL $0 --finish$current_libdirs
+      exit 1
+    fi
+
+    exit 0
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+        libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  eval cmds=\"$finish_cmds\"
+          IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+          for cmd in $cmds; do
+            IFS="$save_ifs"
+            $show "$cmd"
+            $run eval "$cmd"
+          done
+          IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds"
+	fi
+      done
+    fi
+
+    echo "------------------------------------------------------------------------------"
+    echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      echo "   $libdir"
+    done
+    echo
+    echo "To link against installed libraries in a given directory, LIBDIR,"
+    echo "you must use the \`-LLIBDIR' flag during linking."
+    echo
+    echo " You will also need to do one of the following:"
+    if test -n "$shlibpath_var"; then
+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      echo "   - use the \`$flag' linker flag"
+    fi
+    if test -f /etc/ld.so.conf; then
+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    echo
+    echo "See any operating system documentation about shared libraries for"
+    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    echo "------------------------------------------------------------------------------"
+    exit 0
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit 1
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test -f "$file"; then :
+      else
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+
+      dir=
+      case "$file" in
+      *.la)
+        # Check to see that this really is a libtool archive.
+        if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
+        else
+          $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+          $echo "$help" 1>&2
+          exit 1
+        fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+        # If there is no directory component, then add one.
+	case "$file" in
+	*/* | *\\*) . $file ;;
+        *) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit 1
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+        continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case "$file" in
+      -*) ;;
+      *)
+        # Do a test to see if this is really a libtool program.
+        if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case "$file" in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+        ;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      # Export the shlibpath_var.
+      eval "export $shlibpath_var"
+
+      # Now actually exec the command.
+      eval "exec \$cmd$args"
+
+      $echo "$modename: cannot exec \$cmd$args"
+      exit 1
+    else
+      # Display what would be done.
+      eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+      $echo "export $shlibpath_var"
+      $echo "$cmd$args"
+      exit 0
+    fi
+    ;;
+
+  # libtool uninstall mode
+  uninstall)
+    modename="$modename: uninstall"
+    rm="$nonopt"
+    files=
+
+    for arg
+    do
+      case "$arg" in
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$dir" = "X$file" && dir=.
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      rmfiles="$file"
+
+      case "$name" in
+      *.la)
+        # Possibly a libtool archive, so verify it.
+        if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
+          . $dir/$name
+
+          # Delete the libtool libraries and symlinks.
+          for n in $library_names; do
+            rmfiles="$rmfiles $dir/$n"
+            test "X$n" = "X$dlname" && dlname=
+          done
+          test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname"
+          test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
+
+	  $show "$rm $rmfiles"
+	  $run $rm $rmfiles
+
+	  if test -n "$library_names"; then
+	    # Do each command in the postuninstall commands.
+	    eval cmds=\"$postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+          if test -n "$old_library"; then
+	    # Do each command in the old_postuninstall commands.
+	    eval cmds=\"$old_postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+          # FIXME: should reinstall the best remaining shared library.
+        fi
+        ;;
+
+      *.lo)
+        if test "$build_old_libs" = yes; then
+          oldobj=`$echo "X$name" | $Xsed -e 's/\.lo$/\.o/'`
+          rmfiles="$rmfiles $dir/$oldobj"
+        fi
+	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+        ;;
+
+      *)
+      	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+	;;
+      esac
+    done
+    exit 0
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+    ;;
+  esac
+
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$generic_help" 1>&2
+  exit 1
+fi # test -z "$show_help"
+
+# We need to display help for each of the modes.
+case "$mode" in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+-n, --dry-run         display commands without modifying any files
+    --features        display configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --version         print version information
+
+MODE must be one of the following:
+
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+  exit 0
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to dld_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only
+library objects (\`.lo' files) may be specified, and \`-rpath' is required.
+
+If OUTPUT-FILE ends in \`.a', then a standard library is created using \`ar'
+and \`ranlib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.o', then a reloadable object file is
+created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+  ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End: