diff options
author | Dana Robinson <43805+derobins@users.noreply.github.com> | 2022-03-29 12:14:07 (GMT) |
---|---|---|
committer | GitHub <noreply@github.com> | 2022-03-29 12:14:07 (GMT) |
commit | e5481d6d9aaa62c098dacba15380e267309aff59 (patch) | |
tree | ff2d6d0088500c8a12d5a4d447dcb29bb8b9611c /bin/snapshot | |
parent | e5025e5ca3256eea5cd9fffb046699bedc76268e (diff) | |
download | hdf5-e5481d6d9aaa62c098dacba15380e267309aff59.zip hdf5-e5481d6d9aaa62c098dacba15380e267309aff59.tar.gz hdf5-e5481d6d9aaa62c098dacba15380e267309aff59.tar.bz2 |
Brings MANIFEST removal over from develop (#1533)
Diffstat (limited to 'bin/snapshot')
-rwxr-xr-x | bin/snapshot | 837 |
1 files changed, 0 insertions, 837 deletions
diff --git a/bin/snapshot b/bin/snapshot deleted file mode 100755 index 20c73cd..0000000 --- a/bin/snapshot +++ /dev/null @@ -1,837 +0,0 @@ -#!/bin/sh -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://www.hdfgroup.org/licenses. -# If you do not have access to either file, you may request a copy from -# help@hdfgroup.org. - -# This script should be run nightly from cron. It checks out the source -# from the source repository and compares it against the previous -# snapshot. If anything significant changed then a new snapshot is -# created, the minor version number is incremented, and the change is -# checked back into the source repository. -# - - -# function definitions -TIMESTAMP() -{ - echo "=====" "$1": "`date`" "=====" -} - -EXIT_BANNER() -{ - TIMESTAMP "Exit $PROGNAME with status=$?" -} - -# Show current total disk usage. -DISKUSAGE() -{ - du -ks | \ - ( read x y; echo "Disk Usage=$x KB" ) -} - -# function provided for testing software downloaded as tar files. A version of -# this function that properly extracts the downloaded files can be provided in -# the snapshots-${sw}-overrides file. -EXTRACT() -{ - echo "Error: ${SWVERSION} is in source repository - does not need extraction." -} - -# Standard procedure for checking out or updating source code from an hdfgroup -# git repository. Override the function for other repositories or procedures. -SOURCE_CHECKOUT() -{ - if test -n $GIT_URL; then - if [ -n "$AUTOGEN" ]; then - echo "Creating fresh clone of $GIT_URL in $BASEDIR/current_src" - # Check out the current version from source repository. - (cd $BASEDIR; rm -rf current_src - if test -z $GIT_BRANCH; then - echo "Testing empty branch $GIT_BRANCH." - git clone $GIT_URL current_src - else - echo "Testing branch $GIT_BRANCH." - git clone $GIT_URL -b $GIT_BRANCH current_src - fi - ) || exit 1 - else - echo "Creating fresh clone of $GIT_URL in $BASEDIR/current" - # Check out the current version from source repository. - (cd $BASEDIR; rm -rf current - if test -n $GIT_BRANCH; then - git clone $GIT_URL -b $GIT_BRANCH current - else - git clone $GIT_URL current - fi ) || exit 1 - fi - else - echo "Warning! Source directory ("current") is not checked out from git." - fi -} - -# Standard procedure for running the configure command in a build (test) -# directory -RUNCONFIGURE() -{ - if [ "${CURRENT}" != "${TESTDIR}" -a "$CPSRC" = "yes" ]; then - echo "Copying source files to ${TESTDIR}." - cp -pr ${CURRENT}/* ${TESTDIR} - cd ${TESTDIR} - ./${CONFIGURE} - elif [ -n "${AUTOGEN}" ]; then - ${CURRENTSRC}/${CONFIGURE} - else - ${CURRENT}/${CONFIGURE} - fi -} - -# Sometimes "make distclean" doesn't adequately remove files from the previous -# build. If a build (test) directory was used, its contents can be entirely -# deleted to provide a clean start. If the test is building in the source -# directory, the contents can't be deleted, so run "make distclean". -DISTCLEAN() -{ - if [ "${srcdir}" = "yes" -a -n "${SRCDIRNAME}" -a -d ${BASEDIR}/TestDir/${SRCDIRNAME} ]; then - echo "Remove contents of $SRCDIRNAME.\n" - rm -rf ${BASEDIR}/TestDir/${SRCDIRNAME}/* - else - echo "$MAKE distclean" - (cd ${TESTDIR} && ${MAKE} distclean) - fi -} - -# Several of the software packages tested do not support make check-install. -# Those that support it should have a version of this function in their -# override with the following lines: -# TIMESTAMP "check-install $1" -# ${MAKE} check-install $1 -CHECKINSTALL() -{ - echo "check-install is not supported for ${SWVERSION}" -} - -# Function for hdf4 and hdf5 to override to check in changes after snapshot. -# Safety measure to avoid unintended checkins to other repositories. -COMMITSNAPSHOT() -{ - echo "original hdf5 script committed code changes back into git." -} - -DISPLAYUSAGE() -{ - set - - cat <<EOF -Usage: $PROGNAME [all] [checkout] [ftp <URL> [diff] [test] [srcdir] [release] [help] - [clean] [distclean] [echo] [deploy <dir>] [deploydir <dir>] - [zlib <zlib_path>] [releasedir <dir>] [srcdirname <dir>] [check-vfd] - [check-passthrough-vol] - [exec <command>] [module-load <module-list>] [op-configure <option>] - [--<option>] - all: Run all commands (checkout, test & release) - [Default is all] - checkout: Run source checkout - diff: Run diff on current and previous versions. Exit 0 if - no significant differences are found. Otherwise, non-zero. - deploy: deploy binary to directory <dir> - deploydir: use <dir> as the default directory for deployment - test: Run test - release: Run release - clean: Run make clean - distclean:Run make distclean - echo: Turn on echo mode (set -x) - setenv <name> <value>: - Set environment variable <name> to <value>. - setenvN <N> <name> <value> ...: - Set environment variable with <N> values. - E.g., setenvN 3 x a b c is same as setenv x="a b c". - srcdir: Use srcdir option (does not imply other commands) - "snapshot srcdir" is equivalent to "snapshot srcdir all" - "snapshot srcdir checkout" is equivalent to "snapshot checkout" - srcdirname <dir>: - Use <dir> as the srcdir testing directory if srcdir is choosen. - If <dir> starts with '-', it is append to the default name - E.g., "snapshot srcdir srcdirname -xx" uses hostname-xx - [Default is hostname] - help: Print this message - echo: Turn on shell echo - zlib <zlib_path>: - Use <zlib_path> as the ZLIB locations - [Default is $ZLIB_default] - releasedir <dir>: - Use <dir> as the release directory - [Default is $ReleaseDir_default] - check-vfd: - Run make check-vfd instead of just make check. - check-passthrough-vol: - Run make check-passthrough-vol instead of just make check. - NOTE: Will only succeed with passthrough VOL connectors - that use the native VOL connector as the terminal - connector. - exttest <testscript>; - Run testscript; - exec <command>: - Run <command>; - module-load <module-list>: - Load modules in comma-separated <module-list>; - op-configure <option>: - Pass <option> to the configure command - E.g., "snapshot op-configure --enable-parallel" - configures for parallel mode - --<option>: - Pass --<option> to the configure command - E.g., "snapshot --enable-parallel" - configures for parallel mode -EOF - exit $errcode -} - -# MAIN -# SGI /bin/sh replaces $0 as function name if used in a function. -# Set the name here to avoid that ambiguity and better style too. -PROGNAME=$0 -SNAPSHOTNAME= -HDFREPOS= -DOCVERSION="" -MODULELIST="" - -if [ -f bin/snapshot_params ]; then - . bin/snapshot_params - echo "Added snapshot_params." -fi -if [ -z "$SWVER" -a -f bin/snapshot_version ] -then - . bin/snapshot_version - echo "Added snapshot_version." -fi -if [ -n ${HDFREPOS} -a -f bin/snapshot-${HDFREPOS}-overrides ]; then - . bin/snapshot-${HDFREPOS}-overrides - echo "Added snapshot-${HDFREPOS}-overrides." -fi - -echo "=====================================" -echo "$PROGNAME $*" -echo "=====================================" -TIMESTAMP MAIN -uname -a - -# setup exit banner message -trap EXIT_BANNER 0 1 2 9 15 - -# Dump environment variables before option parsing -echo ===Dumping environment variables before option parsing === -printenv | sort -echo ===Done Dumping environment variables before option parsing === - -# snapshots release directory. Default relative to $BASEDIR. -ReleaseDir_default=release_dir - -# Where is the zlib library? -# At NCSA, half of the machines have it in /usr/lib, the other half at -# /usr/ncsa/lib. Leave it unset. -ZLIB_default= -ZLIB=$ZLIB_default - -# What compression methods to use? (md5 does checksum). Doc was apparently -# added as a compression method to create a separate tarfile containing the -# documentation files for v 1.8 and above. -if [ "${SWVERSION}" = "hdf5_1_6" ]; then - METHODS="gzip bzip2 md5" -else - METHODS="gzip bzip2 doc" -fi - -# Use User's MAKE if set. Else use generic make. -MAKE=${MAKE:-make} - -# Default check action. -CHECKVAL=check - -# -# Command options -cmd="all" -test_opt="" -errcode=0 -AUTOGEN="" -EXTTEST="" -EXEC_CMD_ARG="" -while [ $# -gt 0 ] ; do - case "$1" in - all) - cmd="all" - ;; - checkout-autogen) - cmdcheckout="checkout" - AUTOGEN="autogen" - cmd="" - ;; - checkout) - cmdcheckout="checkout" - cmd="" - ;; - ftp) - echo "Setting ftp flags in snapshot script" - cmdcheckout="checkout" - cmdftp="ftp" - cmd="" - shift - if [ $# -lt 1 ]; then - echo "URL missing" - errcode=1 - cmd="help" - break - fi - ftp_url="$1" - echo "ftp_url is $ftp_url" - ;; - diff) - cmddiff="diff" - cmd="" - ;; - deploy) - # deploy the built binary. - shift - if [ $# -lt 1 ]; then - echo "deploy <dir> missing" - errcode=1 - cmd="help" - break - fi - cmddeploy="deploy" - DEPLOYDIRNAME="$1" - ;; - deploydir) - # default directory for deployment. - shift - if [ $# -lt 1 ]; then - echo "deploydir <dir> missing" - errcode=1 - cmd="help" - break - fi - deploydir="$1" - ;; - test) - cmdtest="test" - cmd="" - ;; - setenv) - # set environment variable - shift - eval $1="$2" - export $1 - shift - ;; - setenvN) - # set environment variable with $1 values - # e.g., setenvN 3 x a b c is same as setenv x="a b c". - # a kludge now--the extra single quotes are needed - # else eval complains. - shift - envN=$1 - shift - envname=$1 - envalue= - while test $envN -gt 0; do - shift - envalue="$envalue $1" - envN=`expr $envN - 1` - done - eval $envname="'$envalue'" - export $envname - ;; - srcdir) - #use srcdir option for test - srcdir="yes" - ;; - srcdirname) - shift - if [ $# -lt 1 ]; then - echo "srcdirname <dir> missing" - errcode=1 - cmd="help" - break - fi - SRCDIRNAME="$1" - ;; - release) - cmdrel="release" - cmd="" - ;; - autogen-release) - cmdrel="autogen-release" - cmd="" - ;; - clean | distclean) - cmdclean="$1" - cmd="" - ;; - help) - cmd="help" - break - ;; - echo) - set -x - break - ;; - zlib) - shift - if [ $# -lt 1 ]; then - echo "ZLIB information missing" - errcode=1 - cmd="help" - break - fi - ZLIB="$1" - ;; - releasedir) - shift - if [ $# -lt 1 ]; then - echo "Release directory name missing" - errcode=1 - cmd="help" - break - fi - ReleaseDir="$1" - ;; - exttest) - shift - if [ $# -lt 1 ]; then - echo "exttest script name missing" - errcode=1 - cmd="help" - break - fi - cmd="" - EXTTEST="$1" - ;; - exec) - shift - if [ $# -lt 1 ]; then - echo "exec command name missing" - errcode=1 - cmd="help" - break - fi - cmd="" - EXEC_CMD_ARG="$@" - # exit the parsing while loop since all arguments have been consummed. - break - ;; - check-vfd) - CHECKVAL=check-vfd - ;; - check-passthrough-vol) - CHECKVAL=check-passthrough-vol - ;; - module-load) - shift - if [ $# -lt 1 ]; then - echo "missing module list to load" - errcode=1 - cmd="help" - break - fi - MODULELIST="$1" - ;; - --*) - OP_CONFIGURE="$OP_CONFIGURE $1" - ;; - op-configure) - shift - if [ $# -lt 1 ]; then - echo "op-configure option missing" - errcode=1 - cmd="help" - break - fi - OP_CONFIGURE="$OP_CONFIGURE $1" - ;; - *) - echo "Unkown option $1" - errcode=1 - cmd="help" - break - ;; - esac - shift -done - -if [ -n "$MODULELIST" ]; then - . ~/.bashrc - module use /opt/pkgs/modules/all - # load module command will take a space separated list of modules. - # If we have a comma separated list, convert ',' to ' '. - MODULELIST="$( echo -e "$MODULELIST" | tr ',' ' ' )" - module load $MODULELIST -fi - -# Dump environment variables after option parsing -echo ===Dumping environment variables after option parsing === -printenv | sort -echo ===Done Dumping environment variables after option parsing === - -if [ "$cmd" = help ]; then - DISPLAYUSAGE -fi - -# Setup the proper configure option (--with-zlib) to use zlib library -# provide ZLIB is non-empty. -ZLIB=${ZLIB:+"--with-zlib="$ZLIB} -# Adding --prefix as a configure option will put the path to the deploy -# directory in the initial libhdf5*.la files -if [ -n "$DEPLOYDIRNAME" ]; then - OP_CONFIGURE="$OP_CONFIGURE --prefix=${deploydir}/${DEPLOYDIRNAME}" -fi -CONFIGURE="configure $OP_CONFIGURE" -# echo "Configure command is $CONFIGURE" - -# Execute the requests -snapshot=yes - -BASEDIR=${HOME}/snapshots-${SNAPSHOTNAME} -if [ ! -d ${BASEDIR} ]; then - echo "BASEDIR ($BASEDIR) does not exist" - exit 1 -fi - -CURRENT=${BASEDIR}/current -PREVIOUS=${BASEDIR}/previous -ReleaseDir=${ReleaseDir:=${BASEDIR}/${ReleaseDir_default}} -HOSTNAME=`hostname | cut -f1 -d.` # no domain part - -# Try finding a version of diff that supports the -I option too. -DIFF=diff -for d in `echo $PATH | sed -e 's/:/ /g'` ; do - test -x $d/diff && $d/diff -I XYZ /dev/null /dev/null > /dev/null 2>&1 && - DIFF=$d/diff && break -done - -#============================= -# Run source checkout -#============================= -if [ "$cmd" = "all" -o -n "$cmdcheckout" ]; then - TIMESTAMP "checkout" - # ${BASEDIR}/bin is now updated from git by EveningMaint or DailyMaint - # to avoid updating the scripts in ${BASEDIR}/bin while they are running. - - if [ -z "$AUTOGEN" ]; then - # If there is a Makefile in ${CURRENT}, the last test done in it - # has not been distclean'ed. They would interfere with other - # --srcdir build since make considers the files in ${CURRENT} - # take precedence over files in its own build-directory. Run - # a "make distclean" to clean them all out. This is not really - # part of the "checkout" functions but this is the most convenient - # spot to do the distclean. We will also continue the checkout process - # regardless of the return code of distclean. - ( cd ${CURRENT}; test -f Makefile && ${MAKE} distclean) - fi - # echo "cmdftp is $cmdftp; ftp_url is $ftp_url" - if [ -n "$cmdftp" ]; then - echo "Get the NetCDF4 source from their ftp server." - echo "Command executed is: 2>&1 wget -N $ftp_url" - cd ${BASEDIR}; - WGET_OUTPUT="`2>&1 wget -N $ftp_url`" - errcode=$? - if [[ $errcode -ne 0 ]]; then - exit $errcode - fi - - if [ $? -ne 0 ];then - echo $0: "$WGET_OUTPUT" Exiting. - exit 1 - fi - - # echo "Wget output was $WGET_OUTPUT" - - if echo "$WGET_OUTPUT" | fgrep 'not retrieving' &> /dev/null - then - echo "Snapshot unchanged" - else - echo "New snapshot downloaded" - EXTRACT - fi - else - SOURCE_CHECKOUT - fi -fi # Do source checkout - - -#============================= -# Run Test the HDF5 library -#============================= -if [ "$cmd" = "all" -o -n "$cmdtest" -o -n "$cmddiff" ]; then - TIMESTAMP "Run Tests" - # setup if srcdir is used. - if [ -z "$srcdir" ]; then - TESTDIR=${CURRENT} - else - #create TESTDIR if not exist yet - case "$SRCDIRNAME" in - "") - SRCDIRNAME=$HOSTNAME - ;; - -*) - SRCDIRNAME="$HOSTNAME$SRCDIRNAME" - ;; - esac - TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME} - test -d ${TESTDIR} || mkdir ${TESTDIR} - # set TESTDIR to use the direct path to the local test directory - # rather than the path through ${BASEDIR}. - cd ${TESTDIR} - TESTDIR=`pwd -P` - cd ${CURRENT} - fi - # Make sure current version exists and is clean - if [ -d ${TESTDIR} ]; then - DISTCLEAN - else - errcode=$? - snapshot=no - exit $errcode - fi - - # Compare it with the previous version. Compare only files listed in - # the MANIFEST plus the MANIFEST itself. - if [ -d ${PREVIOUS} ]; then - if [ -z "${AUTOGEN}" ]; then - CURRENTSRC=${CURRENT} - else - CURRENTSRC=${BASEDIR}/current_src - fi - if (${DIFF} -c ${PREVIOUS}/MANIFEST ${CURRENTSRC}/MANIFEST); then - snapshot=no - for src in `grep '^\.' ${CURRENTSRC}/MANIFEST|expand|cut -f1 -d' '`; do - if ${DIFF} -I H5_VERS_RELEASE -I " released on " \ - -I " currently under development" \ - ${PREVIOUS}/$src ${CURRENTSRC}/$src - then - : #continue - else - snapshot=yes - break - fi - done - fi - fi - - # if diff is choosen, exit 0 if no significant differences are found. - # otherwise, exit 1. This includes cases of other failures. - if [ -n "$cmddiff" ]; then - if [ $snapshot = no ]; then - exit 0 - else - exit 1 - fi - fi - - #============================= - # Execute command if defined - #============================= - #echo BEFORE EXEC command - #echo EXEC_CMD_ARG=${EXEC_CMD_ARG} - - if [ -n "$EXEC_CMD_ARG" ]; then - TIMESTAMP ${EXEC_CMD_ARG} - TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME} - test -d ${TESTDIR} || mkdir ${TESTDIR} - if cd ${TESTDIR}; then - # clean up the directory before executing the command - # Do we need to clean first? - # rm -rf * - # - # If EXEC_CMD_ARG starts with a '/', it has an absolute path, else it is - # relative to the BASEDIR. - case "$EXEC_CMD_ARG" in - /*) - ${EXEC_CMD_ARG} - ;; - *) - ${BASEDIR}/${EXEC_CMD_ARG} - ;; - esac - errcode=$? - else - echo "${TESTDIR} not accessible" - errcode=1 - fi - # exit snapshot since nothing else to do, for now. - exit $errcode - fi - - # Build, run tests and install procedures - if [ "$snapshot" = "yes" ] && [ "$NOMAKE" != "yes" ]; then - FAIL_SECTION="" - if [ -f ${TESTDIR}/failsection ]; then - rm ${TESTDIR}/failsection - fi - if (cd ${TESTDIR} && \ - TIMESTAMP "configure" && echo "configure" > ${TESTDIR}/failsection && \ - RUNCONFIGURE && \ - sleep 2 && \ - TIMESTAMP "make" && echo "make" > ${TESTDIR}/failsection && \ - ${MAKE} && DISKUSAGE \ - TIMESTAMP ${CHECKVAL} && echo "make check" > ${TESTDIR}/failsection && \ - ${MAKE} ${CHECKVAL} && DISKUSAGE \ - TIMESTAMP "install" && echo "make install" > ${TESTDIR}/failsection && \ - ${MAKE} install && DISKUSAGE \ - TIMESTAMP "check-install" && echo "make check-install" > ${TESTDIR}/failsection && \ - CHECKINSTALL && DISKUSAGE \ - TIMESTAMP "uninstall" && echo "make uninstall" > ${TESTDIR}/failsection && \ - ${MAKE} uninstall && DISKUSAGE); then - : - else - errcode=$? - FAIL_SECTION=`cat ${TESTDIR}/failsection` - echo "Failed running ${FAIL_SECTION}" - snapshot=no - exit $errcode - fi - elif [ $CPSRC ]; then - cp -pr ${CURRENT}/* ${TESTDIR} - else - cmdclean="" - fi -fi # Test the HDF5 library - -# Run external test if configured - -#============================= -#============================= -#if [ -d "$CURRENT" ]; then -if [ "$EXTTEST" != "" ]; then - TIMESTAMP ${EXTTEST} - TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME} - test -d ${TESTDIR} || mkdir ${TESTDIR} - cd ${TESTDIR} - sleep 1 - TIMESTAMP $pwd - ls - ${BASEDIR}/${EXTTEST} - errcode=$? - exit $errcode -fi - -#============================= -# Run deployment if requested. -#============================= -if [ -n "$DEPLOYDIRNAME" ]; then - # The daily tests deploy to .../hdf5/... or .../hdf4/... except on cobalt where the - # deploy directory is in .../HDF5/... lc will take care of this. If hdf4 or hdf5 - # either upper or lower case isn't in the path, RELEASE.txt won't be found unless - # it is in $CURRENT. - POS4=`perl -e "print index(lc(\"${deploydir}/${DEPLOYDIRNAME}\"), 'hdf4')"` - POS5=`perl -e "print index(lc(\"${deploydir}/${DEPLOYDIRNAME}\"), 'hdf5')"` - if [ "${POS4}" -ge "0" ]; then - RELEASE_TXT_LOC="release_notes" - elif [ "${POS5}" -ge "0" ]; then - RELEASE_TXT_LOC="release_docs" - else - RELEASE_TXT_LOC="" - fi - - if [ "$snapshot" = "yes" ]; then - TIMESTAMP "deploy" - if (cd ${TESTDIR} && - ${BASEDIR}/bin/deploy ${deploydir}/${DEPLOYDIRNAME} && \ - TIMESTAMP "clean" && \ - ${MAKE} clean && \ - TIMESTAMP "check-install prefix=${deploydir}/${DEPLOYDIRNAME}" && \ - CHECKINSTALL prefix=${deploydir}/${DEPLOYDIRNAME}); then - cd ${CURRENT} - cp ${RELEASE_TXT_LOC}/RELEASE.txt ${deploydir}/${DEPLOYDIRNAME} - cp COPYING ${deploydir}/${DEPLOYDIRNAME} - #: #continue - else - errcode=$? - exit $errcode - fi - fi -fi # Deploy - - -#============================= -# Run Release snapshot, update version, and commit to source repository -#============================= -if [ "$cmd" = "all" -o -n "$cmdrel" ]; then - if [ "$snapshot" = "yes" ]; then - TIMESTAMP "release" - DISTCLEAN - ( - # Turn on exit on error in the sub-shell so that it does not - # commit source if errors encounter here. - set -e - if [ "$cmdrel" = "autogen-release" ]; then - cd ${BASEDIR}/current_src - else - cd ${CURRENT} - fi - if [ "$HDFREPOS" = "hdf4" ]; then - RELEASE_VERSION="`perl bin/h4vers -v`" - echo "Making snapshot release ($RELEASE_VERSION) to ${ReleaseDir}..." - bin/release -d $ReleaseDir $METHODS - perl bin/h4vers -i - elif [ "$HDFREPOS" = "hdf5" ]; then - RELEASE_VERSION="`perl bin/h5vers -v`" - echo "Making snapshot release ($RELEASE_VERSION) to ${ReleaseDir}..." - if [ "${DOCVERSION}" ]; then - bin/release -d $ReleaseDir --docver ${DOCVERSION} $METHODS - else - bin/release -d $ReleaseDir $METHODS - fi - perl bin/h5vers -i - else - echo "need real release steps. For now, only move current version to previous" - fi - COMMITSNAPSHOT - ) - errcode=$? - fi - - # Replace the previous version with the current version. - # Should check if the errcode of the release process but there - # are other failures after release was done (e.g. h5vers or git failures) - # that should allow the replacement to occure. - rm -rf ${PREVIOUS} - mv ${CURRENT} ${PREVIOUS} -fi #Release snapshot - - -#============================= -# Clean the test area. Default is no clean. -#============================= -if [ -n "$cmdclean" ] && [ "$NOMAKE" != "yes" ]; then - TIMESTAMP "clean" - # setup if srcdir is used. - if [ -z "$srcdir" ]; then - TESTDIR=${CURRENT} - else - case "$SRCDIRNAME" in - "") - SRCDIRNAME=$HOSTNAME - ;; - -*) - SRCDIRNAME="$HOSTNAME$SRCDIRNAME" - ;; - esac - TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME} - fi - # clean it - if (cd ${TESTDIR} && ${MAKE} $cmdclean ) then - : - else - errcode=$? - snapshot=no - exit $errcode - fi -fi # Clean the Test directory - -exit $errcode |