[svn-r29224] Brought alpha2 branch in sync with revise_chunks (up to r29219)

Note: generated autotools files are from a VM and not THG
      machines. These will be updated immediately after
      check-in.

Tested on: 64-bit Ubuntu 15.10 w/ gcc 5.2.1
           autotools serial w/ Fortran & C++
           autotools parallel (MPICH 3.1.4) w/ Fortran
           CMake serial (cmakehdf5 w/ CMake 3.3.2)

4 files changed, 1997 insertions, 3482 deletions

diff --git a/bin/cmakehdf5 b/bin/cmakehdf5
index 7d9caa8..ccef469 100755
--- a/bin/cmakehdf5
+++ b/bin/cmakehdf5
@@ -46,6 +46,7 @@ cacheinit=$srcdir/config/cmake/cacheinit.cmake
 build_cpp_lib=-DHDF5_BUILD_CPP_LIB:BOOL=OFF	# C++ interface default off
 build_fortran=-DHDF5_BUILD_FORTRAN:BOOL=OFF	# Fortran interface default off
 build_hl_lib=-DHDF5_BUILD_HL_LIB:BOOL=ON	# High Level interface default on
+build_threadsafe=-DHDF5_ENABLE_THREADSAFE:BOOL=OFF	# Threadsafe feature default off
 build_testing=-DBUILD_TESTING:BOOL=ON		# Build tests default on
 build_tools=-DHDF5_BUILD_TOOLS:BOOL=ON		# Build tools default on
 with_zlib=-DHDF5_ENABLE_Z_LIB_SUPPORT=ON	# enable zlib filter default on
@@ -82,6 +83,8 @@ Usage: $progname [<options>]
     enable or disable c++ API. Default is off.
   --enable-hl | --disable-hl:
     enable or disable high level API. Default is on.
+  --enable-threadsafe | --disable-threadsafe:
+    enable or disable threadsafe feature. Default is off
   --enable-shared | --disable-shared:
     enable or disable shared lib. Default is on.
   --enable-tools | --disable-tools:
@@ -229,6 +232,12 @@ while [ $# -gt 0 ]; do
 	--disable-hl)
 	    build_hl_lib=-DHDF5_BUILD_HL_LIB:BOOL=OFF
 	    ;;
+	--enable-threadsafe)
+	    build_threadsafe=-DHDF5_ENABLE_THREADSAFE:BOOL=ON
+	    ;;
+	--disable-threadsafe)
+	    build_threadsafe=-DHDF5_ENABLE_THREADSAFE:BOOL=OFF
+	    ;;
 	--enable-shared)
 	    shared_lib=-DBUILD_SHARED_LIBS:BOOL=ON
 	    ;;
@@ -330,6 +339,7 @@ STEP "Configure..." \
     $build_cpp_lib \
     $build_fortran \
     $build_hl_lib \
+    $build_threadsafe \
     $shared_lib \
     $build_testing \
     $build_tools \
diff --git a/bin/config.guess b/bin/config.guess
index 6c32c86..1f5c50c 100755
--- a/bin/config.guess
+++ b/bin/config.guess
@@ -2,7 +2,7 @@
 # Attempt to guess a canonical system name.
 #   Copyright 1992-2014 Free Software Foundation, Inc.
 
-timestamp='2014-11-04'
+timestamp='2014-03-23'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -24,12 +24,12 @@ timestamp='2014-11-04'
 # program.  This Exception is an additional permission under section 7
 # of the GNU General Public License, version 3 ("GPLv3").
 #
-# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+# Originally written by Per Bothner.
 #
 # You can get the latest version of this script from:
 # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 #
-# Please send patches to <config-patches@gnu.org>.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
 
 
 me=`echo "$0" | sed -e 's,.*/,,'`
@@ -579,9 +579,8 @@ EOF
 	else
 		IBM_ARCH=powerpc
 	fi
-	if [ -x /usr/bin/lslpp ] ; then
-		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
-			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
 	else
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
diff --git a/bin/config.sub b/bin/config.sub
index 7ffe373..bba4efb 100755
--- a/bin/config.sub
+++ b/bin/config.sub
@@ -2,7 +2,7 @@
 # Configuration validation subroutine script.
 #   Copyright 1992-2014 Free Software Foundation, Inc.
 
-timestamp='2014-12-03'
+timestamp='2014-09-11'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -25,7 +25,7 @@ timestamp='2014-12-03'
 # of the GNU General Public License, version 3 ("GPLv3").
 
 
-# Please send patches to <config-patches@gnu.org>.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -313,7 +313,6 @@ case $basic_machine in
 	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
 	| ubicom32 \
 	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
-	| visium \
 	| we32k \
 	| x86 | xc16x | xstormy16 | xtensa \
 	| z8k | z80)
@@ -328,9 +327,6 @@ case $basic_machine in
 	c6x)
 		basic_machine=tic6x-unknown
 		;;
-	leon|leon[3-9])
-		basic_machine=sparc-$basic_machine
-		;;
 	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
@@ -441,7 +437,6 @@ case $basic_machine in
 	| ubicom32-* \
 	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
 	| vax-* \
-	| visium-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* \
 	| xstormy16-* | xtensa*-* \
@@ -779,9 +774,6 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
-	leon-*|leon[3-9]-*)
-		basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
-		;;
 	m68knommu)
 		basic_machine=m68k-unknown
 		os=-linux
diff --git a/bin/ltmain.sh b/bin/ltmain.sh
index 0f0a2da..bffda54 100644
--- a/bin/ltmain.sh
+++ b/bin/ltmain.sh
@@ -1,12 +1,9 @@
-#! /bin/sh
-## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
-##               by inline-source v2014-01-03.01
 
-# libtool (GNU libtool) 2.4.6
-# Provide generalized library-building support services.
+# libtool (GNU libtool) 2.4.2
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996-2015 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -26,2112 +23,881 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-PROGRAM=libtool
-PACKAGE=libtool
-VERSION=2.4.6
-package_revision=2.4.6
-
-
-## ------ ##
-## Usage. ##
-## ------ ##
-
-# Run './libtool --help' for help with using this script from the
-# command line.
-
-
-## ------------------------------- ##
-## User overridable command paths. ##
-## ------------------------------- ##
-
-# After configure completes, it has a better idea of some of the
-# shell tools we need than the defaults used by the functions shared
-# with bootstrap, so set those here where they can still be over-
-# ridden by the user, but otherwise take precedence.
-
-: ${AUTOCONF="autoconf"}
-: ${AUTOMAKE="automake"}
-
-
-## -------------------------- ##
-## Source external libraries. ##
-## -------------------------- ##
-
-# Much of our low-level functionality needs to be sourced from external
-# libraries, which are installed to $pkgauxdir.
-
-# Set a version string for this script.
-scriptversion=2015-01-20.17; # UTC
-
-# General shell script boiler plate, and helper functions.
-# Written by Gary V. Vaughan, 2004
-
-# Copyright (C) 2004-2015 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions.  There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-
-# As a special exception to the GNU General Public License, if you distribute
-# this file as part of a program or library that is built using GNU Libtool,
-# you may include this file under the same distribution terms that you use
-# for the rest of that program.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# Please report bugs or propose patches to gary@gnu.org.
-
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
-## ------ ##
-## Usage. ##
-## ------ ##
-
-# Evaluate this file near the top of your script to gain access to
-# the functions and variables defined here:
+# Usage: $progname [OPTION]... [MODE-ARG]...
 #
-#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+# Provide generalized library-building support services.
 #
-# If you need to override any of the default environment variable
-# settings, do that before evaluating this file.
-
-
-## -------------------- ##
-## Shell normalisation. ##
-## -------------------- ##
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --no-warn            don't display warning messages
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1.11
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
 
-# Some shells need a little help to be as Bourne compatible as possible.
-# Before doing anything else, make sure all that help has been provided!
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION="2.4.2 Debian-2.4.2-1.11"
+TIMESTAMP=""
+package_revision=1.3337
 
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
 fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
 
-# NLS nuisances: We save the old values in case they are required later.
-_G_user_locale=
-_G_safe_locale=
-for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
-  eval "if test set = \"\${$_G_var+set}\"; then
-          save_$_G_var=\$$_G_var
-          $_G_var=C
-	  export $_G_var
-	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
-	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
-	fi"
-done
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Make sure IFS has a sensible default
-sp=' '
-nl='
-'
-IFS="$sp	$nl"
-
-# There are apparently some retarded systems that use ';' as a PATH separator!
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-
-## ------------------------- ##
-## Locate command utilities. ##
-## ------------------------- ##
-
-
-# func_executable_p FILE
-# ----------------------
-# Check that FILE is an executable regular file.
-func_executable_p ()
-{
-    test -f "$1" && test -x "$1"
-}
-
-
-# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
-# --------------------------------------------
-# Search for either a program that responds to --version with output
-# containing "GNU", or else returned by CHECK_FUNC otherwise, by
-# trying all the directories in PATH with each of the elements of
-# PROGS_LIST.
-#
-# CHECK_FUNC should accept the path to a candidate program, and
-# set $func_check_prog_result if it truncates its output less than
-# $_G_path_prog_max characters.
-func_path_progs ()
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
 {
-    _G_progs_list=$1
-    _G_check_func=$2
-    _G_PATH=${3-"$PATH"}
-
-    _G_path_prog_max=0
-    _G_path_prog_found=false
-    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
-    for _G_dir in $_G_PATH; do
-      IFS=$_G_save_IFS
-      test -z "$_G_dir" && _G_dir=.
-      for _G_prog_name in $_G_progs_list; do
-        for _exeext in '' .EXE; do
-          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
-          func_executable_p "$_G_path_prog" || continue
-          case `"$_G_path_prog" --version 2>&1` in
-            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
-            *)     $_G_check_func $_G_path_prog
-		   func_path_progs_result=$func_check_prog_result
-		   ;;
-          esac
-          $_G_path_prog_found && break 3
-        done
-      done
-    done
-    IFS=$_G_save_IFS
-    test -z "$func_path_progs_result" && {
-      echo "no acceptable sed could be found in \$PATH" >&2
-      exit 1
-    }
-}
-
-
-# We want to be able to use the functions in this file before configure
-# has figured out where the best binaries are kept, which means we have
-# to search for them ourselves - except when the results are already set
-# where we skip the searches.
-
-# Unless the user overrides by setting SED, search the path for either GNU
-# sed, or the sed that truncates its output the least.
-test -z "$SED" && {
-  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
-  for _G_i in 1 2 3 4 5 6 7; do
-    _G_sed_script=$_G_sed_script$nl$_G_sed_script
-  done
-  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
-  _G_sed_script=
-
-  func_check_prog_sed ()
-  {
-    _G_path_prog=$1
-
-    _G_count=0
-    printf 0123456789 >conftest.in
-    while :
-    do
-      cat conftest.in conftest.in >conftest.tmp
-      mv conftest.tmp conftest.in
-      cp conftest.in conftest.nl
-      echo '' >> conftest.nl
-      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
-      diff conftest.out conftest.nl >/dev/null 2>&1 || break
-      _G_count=`expr $_G_count + 1`
-      if test "$_G_count" -gt "$_G_path_prog_max"; then
-        # Best one so far, save it but keep looking for a better one
-        func_check_prog_result=$_G_path_prog
-        _G_path_prog_max=$_G_count
-      fi
-      # 10*(2^10) chars as input seems more than enough
-      test 10 -lt "$_G_count" && break
-    done
-    rm -f conftest.in conftest.tmp conftest.nl conftest.out
-  }
-
-  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
-  rm -f conftest.sed
-  SED=$func_path_progs_result
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
 }
 
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+          save_$lt_var=\$$lt_var
+          $lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
 
-# Unless the user overrides by setting GREP, search the path for either GNU
-# grep, or the grep that truncates its output the least.
-test -z "$GREP" && {
-  func_check_prog_grep ()
-  {
-    _G_path_prog=$1
-
-    _G_count=0
-    _G_path_prog_max=0
-    printf 0123456789 >conftest.in
-    while :
-    do
-      cat conftest.in conftest.in >conftest.tmp
-      mv conftest.tmp conftest.in
-      cp conftest.in conftest.nl
-      echo 'GREP' >> conftest.nl
-      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
-      diff conftest.out conftest.nl >/dev/null 2>&1 || break
-      _G_count=`expr $_G_count + 1`
-      if test "$_G_count" -gt "$_G_path_prog_max"; then
-        # Best one so far, save it but keep looking for a better one
-        func_check_prog_result=$_G_path_prog
-        _G_path_prog_max=$_G_count
-      fi
-      # 10*(2^10) chars as input seems more than enough
-      test 10 -lt "$_G_count" && break
-    done
-    rm -f conftest.in conftest.tmp conftest.nl conftest.out
-  }
+$lt_unset CDPATH
 
-  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
-  GREP=$func_path_progs_result
-}
 
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
 
-## ------------------------------- ##
-## User overridable command paths. ##
-## ------------------------------- ##
 
-# All uppercase variable names are used for environment variables.  These
-# variables can be overridden by the user before calling a script that
-# uses them if a suitable command of that name is not already available
-# in the command search PATH.
 
 : ${CP="cp -f"}
-: ${ECHO="printf %s\n"}
-: ${EGREP="$GREP -E"}
-: ${FGREP="$GREP -F"}
-: ${LN_S="ln -s"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
 
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
 
-## -------------------- ##
-## Useful sed snippets. ##
-## -------------------- ##
+exit_status=$EXIT_SUCCESS
 
-sed_dirname='s|/[^/]*$||'
-sed_basename='s|^.*/||'
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
 
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
 
-# Same as above, but do not quote variable references.
-sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
 
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
 
-# Sed substitution that converts a w32 file name or path
-# that contains forward slashes, into one that contains
-# (escaped) backslashes.  A very naive implementation.
-sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-'\' parameter expansions in output of sed_double_quote_subst that
-# were '\'-ed in input to the same.  If an odd number of '\' preceded a
-# '$' in input to sed_double_quote_subst, that '$' was protected from
-# expansion.  Since each input '\' is now two '\'s, look for any number
-# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
-_G_bs='\\'
-_G_bs2='\\\\'
-_G_bs4='\\\\\\\\'
-_G_dollar='\$'
-sed_double_backslash="\
-  s/$_G_bs4/&\\
-/g
-  s/^$_G_bs2$_G_dollar/$_G_bs&/
-  s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
-  s/\n//g"
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
 
 
-## ----------------- ##
-## Global variables. ##
-## ----------------- ##
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
 
-# Except for the global variables explicitly listed below, the following
-# functions in the '^func_' namespace, and the '^require_' namespace
-# variables initialised in the 'Resource management' section, sourcing
-# this file will not pollute your global namespace with anything
-# else. There's no portable way to scope variables in Bourne shell
-# though, so actually running these functions will sometimes place
-# results into a variable named after the function, and often use
-# temporary variables in the '^_G_' namespace. If you are careful to
-# avoid using those namespaces casually in your sourcing script, things
-# should continue to work as you expect. And, of course, you can freely
-# overwrite any of the functions or variables defined here before
-# calling anything to customize them.
 
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
 
-# Allow overriding, eg assuming that you follow the convention of
-# putting '$debug_cmd' at the start of all your functions, you can get
-# bash to show function call trace with:
-#
-#    debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
-debug_cmd=${debug_cmd-":"}
-exit_cmd=:
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
 
-# By convention, finish your script with:
-#
-#    exit $exit_status
-#
-# so that you can set exit_status to non-zero if you want to indicate
-# something went wrong during execution without actually bailing out at
-# the point of failure.
-exit_status=$EXIT_SUCCESS
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath=$0
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
 
-# The name of this program.
-progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
 
-# Make sure we have an absolute progpath for reexecution:
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
 case $progpath in
   [\\/]*|[A-Za-z]:\\*) ;;
   *[\\/]*)
-     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+     progdir=$func_dirname_result
      progdir=`cd "$progdir" && pwd`
-     progpath=$progdir/$progname
+     progpath="$progdir/$progname"
      ;;
   *)
-     _G_IFS=$IFS
+     save_IFS="$IFS"
      IFS=${PATH_SEPARATOR-:}
      for progdir in $PATH; do
-       IFS=$_G_IFS
+       IFS="$save_IFS"
        test -x "$progdir/$progname" && break
      done
-     IFS=$_G_IFS
+     IFS="$save_IFS"
      test -n "$progdir" || progdir=`pwd`
-     progpath=$progdir/$progname
+     progpath="$progdir/$progname"
      ;;
 esac
 
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
 
-## ----------------- ##
-## Standard options. ##
-## ----------------- ##
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
-# The following options affect the operation of the functions defined
-# below, and should be set appropriately depending on run-time para-
-# meters passed on the command line.
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
 
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
 opt_dry_run=false
+opt_help=false
 opt_quiet=false
 opt_verbose=false
+opt_warning=:
 
-# Categories 'all' and 'none' are always available.  Append any others
-# you will pass as the first argument to func_warning from your own
-# code.
-warning_categories=
-
-# By default, display warnings according to 'opt_warning_types'.  Set
-# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
-# treat the next displayed warning as a fatal error.
-warning_func=func_warn_and_continue
-
-# Set to 'all' to display all warnings, 'none' to suppress all
-# warnings, or a space delimited list of some subset of
-# 'warning_categories' to display only the listed warnings.
-opt_warning_types=all
-
-
-## -------------------- ##
-## Resource management. ##
-## -------------------- ##
-
-# This section contains definitions for functions that each ensure a
-# particular resource (a file, or a non-empty configuration variable for
-# example) is available, and if appropriate to extract default values
-# from pertinent package files. Call them using their associated
-# 'require_*' variable to ensure that they are executed, at most, once.
-#
-# It's entirely deliberate that calling these functions can set
-# variables that don't obey the namespace limitations obeyed by the rest
-# of this file, in order that that they be as useful as possible to
-# callers.
-
-
-# require_term_colors
-# -------------------
-# Allow display of bold text on terminals that support it.
-require_term_colors=func_require_term_colors
-func_require_term_colors ()
-{
-    $debug_cmd
-
-    test -t 1 && {
-      # COLORTERM and USE_ANSI_COLORS environment variables take
-      # precedence, because most terminfo databases neglect to describe
-      # whether color sequences are supported.
-      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
-
-      if test 1 = "$USE_ANSI_COLORS"; then
-        # Standard ANSI escape sequences
-        tc_reset=''
-        tc_bold='';   tc_standout=''
-        tc_red='';   tc_green=''
-        tc_blue='';  tc_cyan=''
-      else
-        # Otherwise trust the terminfo database after all.
-        test -n "`tput sgr0 2>/dev/null`" && {
-          tc_reset=`tput sgr0`
-          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
-          tc_standout=$tc_bold
-          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
-          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
-          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
-          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
-          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
-        }
-      fi
-    }
-
-    require_term_colors=:
-}
-
-
-## ----------------- ##
-## Function library. ##
-## ----------------- ##
-
-# This section contains a variety of useful functions to call in your
-# scripts. Take note of the portable wrappers for features provided by
-# some modern shells, which will fall back to slower equivalents on
-# less featureful shells.
-
-
-# func_append VAR VALUE
-# ---------------------
-# Append VALUE onto the existing contents of VAR.
-
-  # We should try to minimise forks, especially on Windows where they are
-  # unreasonably slow, so skip the feature probes when bash or zsh are
-  # being used:
-  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
-    : ${_G_HAVE_ARITH_OP="yes"}
-    : ${_G_HAVE_XSI_OPS="yes"}
-    # The += operator was introduced in bash 3.1
-    case $BASH_VERSION in
-      [12].* | 3.0 | 3.0*) ;;
-      *)
-        : ${_G_HAVE_PLUSEQ_OP="yes"}
-        ;;
-    esac
-  fi
-
-  # _G_HAVE_PLUSEQ_OP
-  # Can be empty, in which case the shell is probed, "yes" if += is
-  # useable or anything else if it does not work.
-  test -z "$_G_HAVE_PLUSEQ_OP" \
-    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
-    && _G_HAVE_PLUSEQ_OP=yes
-
-if test yes = "$_G_HAVE_PLUSEQ_OP"
-then
-  # This is an XSI compatible shell, allowing a faster implementation...
-  eval 'func_append ()
-  {
-    $debug_cmd
-
-    eval "$1+=\$2"
-  }'
-else
-  # ...otherwise fall back to using expr, which is often a shell builtin.
-  func_append ()
-  {
-    $debug_cmd
-
-    eval "$1=\$$1\$2"
-  }
-fi
-
-
-# func_append_quoted VAR VALUE
-# ----------------------------
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-if test yes = "$_G_HAVE_PLUSEQ_OP"; then
-  eval 'func_append_quoted ()
-  {
-    $debug_cmd
-
-    func_quote_for_eval "$2"
-    eval "$1+=\\ \$func_quote_for_eval_result"
-  }'
-else
-  func_append_quoted ()
-  {
-    $debug_cmd
-
-    func_quote_for_eval "$2"
-    eval "$1=\$$1\\ \$func_quote_for_eval_result"
-  }
-fi
-
-
-# func_append_uniq VAR VALUE
-# --------------------------
-# Append unique VALUE onto the existing contents of VAR, assuming
-# entries are delimited by the first character of VALUE.  For example:
-#
-#   func_append_uniq options " --another-option option-argument"
-#
-# will only append to $options if " --another-option option-argument "
-# is not already present somewhere in $options already (note spaces at
-# each end implied by leading space in second argument).
-func_append_uniq ()
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
 {
-    $debug_cmd
-
-    eval _G_current_value='`$ECHO $'$1'`'
-    _G_delim=`expr "$2" : '\(.\)'`
-
-    case $_G_delim$_G_current_value$_G_delim in
-      *"$2$_G_delim"*) ;;
-      *) func_append "$@" ;;
-    esac
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
 }
 
-
-# func_arith TERM...
-# ------------------
-# Set func_arith_result to the result of evaluating TERMs.
-  test -z "$_G_HAVE_ARITH_OP" \
-    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
-    && _G_HAVE_ARITH_OP=yes
-
-if test yes = "$_G_HAVE_ARITH_OP"; then
-  eval 'func_arith ()
-  {
-    $debug_cmd
-
-    func_arith_result=$(( $* ))
-  }'
-else
-  func_arith ()
-  {
-    $debug_cmd
-
-    func_arith_result=`expr "$@"`
-  }
-fi
-
-
-# func_basename FILE
-# ------------------
-# Set func_basename_result to FILE with everything up to and including
-# the last / stripped.
-if test yes = "$_G_HAVE_XSI_OPS"; then
-  # If this shell supports suffix pattern removal, then use it to avoid
-  # forking. Hide the definitions single quotes in case the shell chokes
-  # on unsupported syntax...
-  _b='func_basename_result=${1##*/}'
-  _d='case $1 in
-        */*) func_dirname_result=${1%/*}$2 ;;
-        *  ) func_dirname_result=$3        ;;
-      esac'
-
-else
-  # ...otherwise fall back to using sed.
-  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
-  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
-      if test "X$func_dirname_result" = "X$1"; then
-        func_dirname_result=$3
-      else
-        func_append func_dirname_result "$2"
-      fi'
-fi
-
-eval 'func_basename ()
-{
-    $debug_cmd
-
-    '"$_b"'
-}'
-
-
-# func_dirname FILE APPEND NONDIR_REPLACEMENT
-# -------------------------------------------
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-eval 'func_dirname ()
-{
-    $debug_cmd
-
-    '"$_d"'
-}'
-
-
-# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
-# --------------------------------------------------------
-# Perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# For efficiency, we do not delegate to the functions above but instead
-# duplicate the functionality here.
-eval 'func_dirname_and_basename ()
-{
-    $debug_cmd
-
-    '"$_b"'
-    '"$_d"'
-}'
-
-
-# func_echo ARG...
-# ----------------
-# Echo program name prefixed message.
-func_echo ()
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
 {
-    $debug_cmd
-
-    _G_message=$*
+    $opt_verbose && func_echo ${1+"$@"}
 
-    func_echo_IFS=$IFS
-    IFS=$nl
-    for _G_line in $_G_message; do
-      IFS=$func_echo_IFS
-      $ECHO "$progname: $_G_line"
-    done
-    IFS=$func_echo_IFS
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
 }
 
-
-# func_echo_all ARG...
-# --------------------
+# func_echo_all arg...
 # Invoke $ECHO with all args, space-separated.
 func_echo_all ()
 {
     $ECHO "$*"
 }
 
-
-# func_echo_infix_1 INFIX ARG...
-# ------------------------------
-# Echo program name, followed by INFIX on the first line, with any
-# additional lines not showing INFIX.
-func_echo_infix_1 ()
-{
-    $debug_cmd
-
-    $require_term_colors
-
-    _G_infix=$1; shift
-    _G_indent=$_G_infix
-    _G_prefix="$progname: $_G_infix: "
-    _G_message=$*
-
-    # Strip color escape sequences before counting printable length
-    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
-    do
-      test -n "$_G_tc" && {
-        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
-        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
-      }
-    done
-    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes
-
-    func_echo_infix_1_IFS=$IFS
-    IFS=$nl
-    for _G_line in $_G_message; do
-      IFS=$func_echo_infix_1_IFS
-      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
-      _G_prefix=$_G_indent
-    done
-    IFS=$func_echo_infix_1_IFS
-}
-
-
-# func_error ARG...
-# -----------------
+# func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
 {
-    $debug_cmd
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
 
-    $require_term_colors
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
 
-    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
+    # bash bug again:
+    :
 }
 
-
-# func_fatal_error ARG...
-# -----------------------
+# func_fatal_error arg...
 # Echo program name prefixed message to standard error, and exit.
 func_fatal_error ()
 {
-    $debug_cmd
-
-    func_error "$*"
+    func_error ${1+"$@"}
     exit $EXIT_FAILURE
 }
 
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
 
-# func_grep EXPRESSION FILENAME
-# -----------------------------
+# func_grep expression filename
 # Check whether EXPRESSION matches any line of FILENAME, without output.
 func_grep ()
 {
-    $debug_cmd
-
     $GREP "$1" "$2" >/dev/null 2>&1
 }
 
 
-# func_len STRING
-# ---------------
-# Set func_len_result to the length of STRING. STRING may not
-# start with a hyphen.
-  test -z "$_G_HAVE_XSI_OPS" \
-    && (eval 'x=a/b/c;
-      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
-    && _G_HAVE_XSI_OPS=yes
-
-if test yes = "$_G_HAVE_XSI_OPS"; then
-  eval 'func_len ()
-  {
-    $debug_cmd
-
-    func_len_result=${#1}
-  }'
-else
-  func_len ()
-  {
-    $debug_cmd
-
-    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-  }
-fi
-
-
-# func_mkdir_p DIRECTORY-PATH
-# ---------------------------
+# func_mkdir_p directory-path
 # Make sure the entire path to DIRECTORY-PATH is available.
 func_mkdir_p ()
 {
-    $debug_cmd
-
-    _G_directory_path=$1
-    _G_dir_list=
+    my_directory_path="$1"
+    my_dir_list=
 
-    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
 
-      # Protect directory names starting with '-'
-      case $_G_directory_path in
-        -*) _G_directory_path=./$_G_directory_path ;;
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
       esac
 
       # While some portion of DIR does not yet exist...
-      while test ! -d "$_G_directory_path"; do
+      while test ! -d "$my_directory_path"; do
         # ...make a list in topmost first order.  Use a colon delimited
 	# list incase some portion of path contains whitespace.
-        _G_dir_list=$_G_directory_path:$_G_dir_list
+        my_dir_list="$my_directory_path:$my_dir_list"
 
         # If the last portion added has no slash in it, the list is done
-        case $_G_directory_path in */*) ;; *) break ;; esac
+        case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
       done
-      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
 
-      func_mkdir_p_IFS=$IFS; IFS=:
-      for _G_dir in $_G_dir_list; do
-	IFS=$func_mkdir_p_IFS
-        # mkdir can fail with a 'File exist' error if two processes
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
         # try to create one of the directories concurrently.  Don't
         # stop in that case!
-        $MKDIR "$_G_dir" 2>/dev/null || :
+        $MKDIR "$my_dir" 2>/dev/null || :
       done
-      IFS=$func_mkdir_p_IFS
+      IFS="$save_mkdir_p_IFS"
 
       # Bail out if we (or some other process) failed to create a directory.
-      test -d "$_G_directory_path" || \
-        func_fatal_error "Failed to create '$1'"
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
     fi
 }
 
 
-# func_mktempdir [BASENAME]
-# -------------------------
+# func_mktempdir [string]
 # Make a temporary directory that won't clash with other running
 # libtool processes, and avoids race conditions if possible.  If
-# given, BASENAME is the basename for that directory.
+# given, STRING is the basename for that directory.
 func_mktempdir ()
 {
-    $debug_cmd
-
-    _G_template=${TMPDIR-/tmp}/${1-$progname}
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
 
-    if test : = "$opt_dry_run"; then
+    if test "$opt_dry_run" = ":"; then
       # Return a directory name, but don't create it in dry-run mode
-      _G_tmpdir=$_G_template-$$
+      my_tmpdir="${my_template}-$$"
     else
 
       # If mktemp works, use that first and foremost
-      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 
-      if test ! -d "$_G_tmpdir"; then
+      if test ! -d "$my_tmpdir"; then
         # Failing that, at least try and use $RANDOM to avoid a race
-        _G_tmpdir=$_G_template-${RANDOM-0}$$
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
 
-        func_mktempdir_umask=`umask`
+        save_mktempdir_umask=`umask`
         umask 0077
-        $MKDIR "$_G_tmpdir"
-        umask $func_mktempdir_umask
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
       fi
 
       # If we're not in dry-run mode, bomb out on failure
-      test -d "$_G_tmpdir" || \
-        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $ECHO "$_G_tmpdir"
+    $ECHO "$my_tmpdir"
 }
 
 
-# func_normal_abspath PATH
-# ------------------------
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-func_normal_abspath ()
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
 {
-    $debug_cmd
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
 
-    # These SED scripts presuppose an absolute path with a trailing slash.
-    _G_pathcar='s|^/\([^/]*\).*$|\1|'
-    _G_pathcdr='s|^/[^/]*||'
-    _G_removedotparts=':dotsl
-		s|/\./|/|g
-		t dotsl
-		s|/\.$|/|'
-    _G_collapseslashes='s|/\{1,\}|/|g'
-    _G_finalslash='s|/*$|/|'
-
-    # Start from root dir and reassemble the path.
-    func_normal_abspath_result=
-    func_normal_abspath_tpath=$1
-    func_normal_abspath_altnamespace=
-    case $func_normal_abspath_tpath in
-      "")
-        # Empty path, that just means $cwd.
-        func_stripname '' '/' "`pwd`"
-        func_normal_abspath_result=$func_stripname_result
-        return
-        ;;
-      # The next three entries are used to spot a run of precisely
-      # two leading slashes without using negated character classes;
-      # we take advantage of case's first-match behaviour.
-      ///*)
-        # Unusual form of absolute path, do nothing.
-        ;;
-      //*)
-        # Not necessarily an ordinary path; POSIX reserves leading '//'
-        # and for example Cygwin uses it to access remote file shares
-        # over CIFS/SMB, so we conserve a leading double slash if found.
-        func_normal_abspath_altnamespace=/
-        ;;
-      /*)
-        # Absolute path, do nothing.
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
         ;;
       *)
-        # Relative path, prepend $cwd.
-        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-        ;;
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
     esac
-
-    # Cancel out all the simple stuff to save iterations.  We also want
-    # the path to end with a slash for ease of parsing, so make sure
-    # there is one (and only one) here.
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
-    while :; do
-      # Processed it all yet?
-      if test / = "$func_normal_abspath_tpath"; then
-        # If we ascended to the root using ".." the result may be empty now.
-        if test -z "$func_normal_abspath_result"; then
-          func_normal_abspath_result=/
-        fi
-        break
-      fi
-      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-          -e "$_G_pathcar"`
-      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-          -e "$_G_pathcdr"`
-      # Figure out what to do with it
-      case $func_normal_abspath_tcomponent in
-        "")
-          # Trailing empty path component, ignore it.
-          ;;
-        ..)
-          # Parent dir; strip last assembled component from result.
-          func_dirname "$func_normal_abspath_result"
-          func_normal_abspath_result=$func_dirname_result
-          ;;
-        *)
-          # Actual path component, append it.
-          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
-          ;;
-      esac
-    done
-    # Restore leading double-slash if one was found on entry.
-    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
 }
 
 
-# func_notquiet ARG...
-# --------------------
-# Echo program name prefixed message only when not in quiet mode.
-func_notquiet ()
-{
-    $debug_cmd
-
-    $opt_quiet || func_echo ${1+"$@"}
-
-    # A bug in bash halts the script if the last line of a function
-    # fails when set -e is in force, so we need another command to
-    # work around that:
-    :
-}
-
-
-# func_relative_path SRCDIR DSTDIR
-# --------------------------------
-# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
-func_relative_path ()
-{
-    $debug_cmd
-
-    func_relative_path_result=
-    func_normal_abspath "$1"
-    func_relative_path_tlibdir=$func_normal_abspath_result
-    func_normal_abspath "$2"
-    func_relative_path_tbindir=$func_normal_abspath_result
-
-    # Ascend the tree starting from libdir
-    while :; do
-      # check if we have found a prefix of bindir
-      case $func_relative_path_tbindir in
-        $func_relative_path_tlibdir)
-          # found an exact match
-          func_relative_path_tcancelled=
-          break
-          ;;
-        $func_relative_path_tlibdir*)
-          # found a matching prefix
-          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-          func_relative_path_tcancelled=$func_stripname_result
-          if test -z "$func_relative_path_result"; then
-            func_relative_path_result=.
-          fi
-          break
-          ;;
-        *)
-          func_dirname $func_relative_path_tlibdir
-          func_relative_path_tlibdir=$func_dirname_result
-          if test -z "$func_relative_path_tlibdir"; then
-            # Have to descend all the way to the root!
-            func_relative_path_result=../$func_relative_path_result
-            func_relative_path_tcancelled=$func_relative_path_tbindir
-            break
-          fi
-          func_relative_path_result=../$func_relative_path_result
-          ;;
-      esac
-    done
-
-    # Now calculate path; take care to avoid doubling-up slashes.
-    func_stripname '' '/' "$func_relative_path_result"
-    func_relative_path_result=$func_stripname_result
-    func_stripname '/' '/' "$func_relative_path_tcancelled"
-    if test -n "$func_stripname_result"; then
-      func_append func_relative_path_result "/$func_stripname_result"
-    fi
-
-    # Normalisation. If bindir is libdir, return '.' else relative path.
-    if test -n "$func_relative_path_result"; then
-      func_stripname './' '' "$func_relative_path_result"
-      func_relative_path_result=$func_stripname_result
-    fi
-
-    test -n "$func_relative_path_result" || func_relative_path_result=.
-
-    :
-}
-
-
-# func_quote_for_eval ARG...
-# --------------------------
-# Aesthetically quote ARGs to be evaled later.
-# This function returns two values:
-#   i) func_quote_for_eval_result
-#      double-quoted, suitable for a subsequent eval
-#  ii) func_quote_for_eval_unquoted_result
-#      has all characters that are still active within double
-#      quotes backslashified.
-func_quote_for_eval ()
-{
-    $debug_cmd
-
-    func_quote_for_eval_unquoted_result=
-    func_quote_for_eval_result=
-    while test 0 -lt $#; do
-      case $1 in
-        *[\\\`\"\$]*)
-	  _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
-        *)
-          _G_unquoted_arg=$1 ;;
-      esac
-      if test -n "$func_quote_for_eval_unquoted_result"; then
-	func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
-      else
-        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
-      fi
-
-      case $_G_unquoted_arg in
-        # Double-quote args containing shell metacharacters to delay
-        # word splitting, command substitution and variable expansion
-        # for a subsequent eval.
-        # Many Bourne shells cannot handle close brackets correctly
-        # in scan sets, so we specify it separately.
-        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-          _G_quoted_arg=\"$_G_unquoted_arg\"
-          ;;
-        *)
-          _G_quoted_arg=$_G_unquoted_arg
-	  ;;
-      esac
-
-      if test -n "$func_quote_for_eval_result"; then
-	func_append func_quote_for_eval_result " $_G_quoted_arg"
-      else
-        func_append func_quote_for_eval_result "$_G_quoted_arg"
-      fi
-      shift
-    done
-}
-
-
-# func_quote_for_expand ARG
-# -------------------------
+# func_quote_for_expand arg
 # Aesthetically quote ARG to be evaled later; same as above,
 # but do not quote variable references.
 func_quote_for_expand ()
 {
-    $debug_cmd
-
     case $1 in
       *[\\\`\"]*)
-	_G_arg=`$ECHO "$1" | $SED \
-	    -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
+	my_arg=`$ECHO "$1" | $SED \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
-        _G_arg=$1 ;;
+        my_arg="$1" ;;
     esac
 
-    case $_G_arg in
+    case $my_arg in
       # Double-quote args containing shell metacharacters to delay
       # word splitting and command substitution for a subsequent eval.
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        _G_arg=\"$_G_arg\"
+        my_arg="\"$my_arg\""
         ;;
     esac
 
-    func_quote_for_expand_result=$_G_arg
+    func_quote_for_expand_result="$my_arg"
 }
 
 
-# func_stripname PREFIX SUFFIX NAME
-# ---------------------------------
-# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-if test yes = "$_G_HAVE_XSI_OPS"; then
-  eval 'func_stripname ()
-  {
-    $debug_cmd
-
-    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-    # positional parameters, so assign one to ordinary variable first.
-    func_stripname_result=$3
-    func_stripname_result=${func_stripname_result#"$1"}
-    func_stripname_result=${func_stripname_result%"$2"}
-  }'
-else
-  func_stripname ()
-  {
-    $debug_cmd
-
-    case $2 in
-      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
-      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
-    esac
-  }
-fi
-
-
-# func_show_eval CMD [FAIL_EXP]
-# -----------------------------
-# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.
 func_show_eval ()
 {
-    $debug_cmd
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
 
-    _G_cmd=$1
-    _G_fail_exp=${2-':'}
-
-    func_quote_for_expand "$_G_cmd"
-    eval "func_notquiet $func_quote_for_expand_result"
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
 
-    $opt_dry_run || {
-      eval "$_G_cmd"
-      _G_status=$?
-      if test 0 -ne "$_G_status"; then
-	eval "(exit $_G_status); $_G_fail_exp"
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
       fi
-    }
+    fi
 }
 
 
-# func_show_eval_locale CMD [FAIL_EXP]
-# ------------------------------------
-# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.  Use the saved locale for evaluation.
 func_show_eval_locale ()
 {
-    $debug_cmd
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
 
-    _G_cmd=$1
-    _G_fail_exp=${2-':'}
-
-    $opt_quiet || {
-      func_quote_for_expand "$_G_cmd"
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
       eval "func_echo $func_quote_for_expand_result"
     }
 
-    $opt_dry_run || {
-      eval "$_G_user_locale
-	    $_G_cmd"
-      _G_status=$?
-      eval "$_G_safe_locale"
-      if test 0 -ne "$_G_status"; then
-	eval "(exit $_G_status); $_G_fail_exp"
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
       fi
-    }
+    fi
 }
 
-
 # func_tr_sh
-# ----------
 # Turn $1 into a string suitable for a shell variable name.
 # Result is stored in $func_tr_sh_result.  All characters
 # not in the set a-zA-Z0-9_ are replaced with '_'. Further,
 # if $1 begins with a digit, a '_' is prepended as well.
 func_tr_sh ()
 {
-    $debug_cmd
-
-    case $1 in
-    [0-9]* | *[!a-zA-Z0-9_]*)
-      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
-      ;;
-    * )
-      func_tr_sh_result=$1
-      ;;
-    esac
-}
-
-
-# func_verbose ARG...
-# -------------------
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
-    $debug_cmd
-
-    $opt_verbose && func_echo "$*"
-
-    :
-}
-
-
-# func_warn_and_continue ARG...
-# -----------------------------
-# Echo program name prefixed warning message to standard error.
-func_warn_and_continue ()
-{
-    $debug_cmd
-
-    $require_term_colors
-
-    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
-}
-
-
-# func_warning CATEGORY ARG...
-# ----------------------------
-# Echo program name prefixed warning message to standard error. Warning
-# messages can be filtered according to CATEGORY, where this function
-# elides messages where CATEGORY is not listed in the global variable
-# 'opt_warning_types'.
-func_warning ()
-{
-    $debug_cmd
-
-    # CATEGORY must be in the warning_categories list!
-    case " $warning_categories " in
-      *" $1 "*) ;;
-      *) func_internal_error "invalid warning category '$1'" ;;
-    esac
-
-    _G_category=$1
-    shift
-
-    case " $opt_warning_types " in
-      *" $_G_category "*) $warning_func ${1+"$@"} ;;
-    esac
-}
-
-
-# func_sort_ver VER1 VER2
-# -----------------------
-# 'sort -V' is not generally available.
-# Note this deviates from the version comparison in automake
-# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
-# but this should suffice as we won't be specifying old
-# version formats or redundant trailing .0 in bootstrap.conf.
-# If we did want full compatibility then we should probably
-# use m4_version_compare from autoconf.
-func_sort_ver ()
-{
-    $debug_cmd
-
-    printf '%s\n%s\n' "$1" "$2" \
-      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
-}
-
-# func_lt_ver PREV CURR
-# ---------------------
-# Return true if PREV and CURR are in the correct order according to
-# func_sort_ver, otherwise false.  Use it like this:
-#
-#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
-func_lt_ver ()
-{
-    $debug_cmd
-
-    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
-}
-
-
-# Local variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
-# time-stamp-time-zone: "UTC"
-# End:
-#! /bin/sh
-
-# Set a version string for this script.
-scriptversion=2014-01-07.03; # UTC
-
-# A portable, pluggable option parser for Bourne shell.
-# Written by Gary V. Vaughan, 2010
-
-# Copyright (C) 2010-2015 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions.  There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# Please report bugs or propose patches to gary@gnu.org.
-
-
-## ------ ##
-## Usage. ##
-## ------ ##
-
-# This file is a library for parsing options in your shell scripts along
-# with assorted other useful supporting features that you can make use
-# of too.
-#
-# For the simplest scripts you might need only:
-#
-#   #!/bin/sh
-#   . relative/path/to/funclib.sh
-#   . relative/path/to/options-parser
-#   scriptversion=1.0
-#   func_options ${1+"$@"}
-#   eval set dummy "$func_options_result"; shift
-#   ...rest of your script...
-#
-# In order for the '--version' option to work, you will need to have a
-# suitably formatted comment like the one at the top of this file
-# starting with '# Written by ' and ending with '# warranty; '.
-#
-# For '-h' and '--help' to work, you will also need a one line
-# description of your script's purpose in a comment directly above the
-# '# Written by ' line, like the one at the top of this file.
-#
-# The default options also support '--debug', which will turn on shell
-# execution tracing (see the comment above debug_cmd below for another
-# use), and '--verbose' and the func_verbose function to allow your script
-# to display verbose messages only when your user has specified
-# '--verbose'.
-#
-# After sourcing this file, you can plug processing for additional
-# options by amending the variables from the 'Configuration' section
-# below, and following the instructions in the 'Option parsing'
-# section further down.
-
-## -------------- ##
-## Configuration. ##
-## -------------- ##
-
-# You should override these variables in your script after sourcing this
-# file so that they reflect the customisations you have added to the
-# option parser.
-
-# The usage line for option parsing errors and the start of '-h' and
-# '--help' output messages. You can embed shell variables for delayed
-# expansion at the time the message is displayed, but you will need to
-# quote other shell meta-characters carefully to prevent them being
-# expanded when the contents are evaled.
-usage='$progpath [OPTION]...'
-
-# Short help message in response to '-h' and '--help'.  Add to this or
-# override it after sourcing this library to reflect the full set of
-# options your script accepts.
-usage_message="\
-       --debug        enable verbose shell tracing
-   -W, --warnings=CATEGORY
-                      report the warnings falling in CATEGORY [all]
-   -v, --verbose      verbosely report processing
-       --version      print version information and exit
-   -h, --help         print short or long help message and exit
-"
-
-# Additional text appended to 'usage_message' in response to '--help'.
-long_help_message="
-Warning categories include:
-       'all'          show all warnings
-       'none'         turn off all the warnings
-       'error'        warnings are treated as fatal errors"
-
-# Help message printed before fatal option parsing errors.
-fatal_help="Try '\$progname --help' for more information."
-
-
-
-## ------------------------- ##
-## Hook function management. ##
-## ------------------------- ##
-
-# This section contains functions for adding, removing, and running hooks
-# to the main code.  A hook is just a named list of of function, that can
-# be run in order later on.
-
-# func_hookable FUNC_NAME
-# -----------------------
-# Declare that FUNC_NAME will run hooks added with
-# 'func_add_hook FUNC_NAME ...'.
-func_hookable ()
-{
-    $debug_cmd
-
-    func_append hookable_fns " $1"
-}
-
-
-# func_add_hook FUNC_NAME HOOK_FUNC
-# ---------------------------------
-# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
-# first have been declared "hookable" by a call to 'func_hookable'.
-func_add_hook ()
-{
-    $debug_cmd
-
-    case " $hookable_fns " in
-      *" $1 "*) ;;
-      *) func_fatal_error "'$1' does not accept hook functions." ;;
-    esac
-
-    eval func_append ${1}_hooks '" $2"'
-}
-
-
-# func_remove_hook FUNC_NAME HOOK_FUNC
-# ------------------------------------
-# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
-func_remove_hook ()
-{
-    $debug_cmd
-
-    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
-}
-
-
-# func_run_hooks FUNC_NAME [ARG]...
-# ---------------------------------
-# Run all hook functions registered to FUNC_NAME.
-# It is assumed that the list of hook functions contains nothing more
-# than a whitespace-delimited list of legal shell function names, and
-# no effort is wasted trying to catch shell meta-characters or preserve
-# whitespace.
-func_run_hooks ()
-{
-    $debug_cmd
-
-    case " $hookable_fns " in
-      *" $1 "*) ;;
-      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
-    esac
-
-    eval _G_hook_fns=\$$1_hooks; shift
-
-    for _G_hook in $_G_hook_fns; do
-      eval $_G_hook '"$@"'
-
-      # store returned options list back into positional
-      # parameters for next 'cmd' execution.
-      eval _G_hook_result=\$${_G_hook}_result
-      eval set dummy "$_G_hook_result"; shift
-    done
-
-    func_quote_for_eval ${1+"$@"}
-    func_run_hooks_result=$func_quote_for_eval_result
-}
-
-
-
-## --------------- ##
-## Option parsing. ##
-## --------------- ##
-
-# In order to add your own option parsing hooks, you must accept the
-# full positional parameter list in your hook function, remove any
-# options that you action, and then pass back the remaining unprocessed
-# options in '<hooked_function_name>_result', escaped suitably for
-# 'eval'.  Like this:
-#
-#    my_options_prep ()
-#    {
-#        $debug_cmd
-#
-#        # Extend the existing usage message.
-#        usage_message=$usage_message'
-#      -s, --silent       don'\''t print informational messages
-#    '
-#
-#        func_quote_for_eval ${1+"$@"}
-#        my_options_prep_result=$func_quote_for_eval_result
-#    }
-#    func_add_hook func_options_prep my_options_prep
-#
-#
-#    my_silent_option ()
-#    {
-#        $debug_cmd
-#
-#        # Note that for efficiency, we parse as many options as we can
-#        # recognise in a loop before passing the remainder back to the
-#        # caller on the first unrecognised argument we encounter.
-#        while test $# -gt 0; do
-#          opt=$1; shift
-#          case $opt in
-#            --silent|-s) opt_silent=: ;;
-#            # Separate non-argument short options:
-#            -s*)         func_split_short_opt "$_G_opt"
-#                         set dummy "$func_split_short_opt_name" \
-#                             "-$func_split_short_opt_arg" ${1+"$@"}
-#                         shift
-#                         ;;
-#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
-#          esac
-#        done
-#
-#        func_quote_for_eval ${1+"$@"}
-#        my_silent_option_result=$func_quote_for_eval_result
-#    }
-#    func_add_hook func_parse_options my_silent_option
-#
-#
-#    my_option_validation ()
-#    {
-#        $debug_cmd
-#
-#        $opt_silent && $opt_verbose && func_fatal_help "\
-#    '--silent' and '--verbose' options are mutually exclusive."
-#
-#        func_quote_for_eval ${1+"$@"}
-#        my_option_validation_result=$func_quote_for_eval_result
-#    }
-#    func_add_hook func_validate_options my_option_validation
-#
-# You'll alse need to manually amend $usage_message to reflect the extra
-# options you parse.  It's preferable to append if you can, so that
-# multiple option parsing hooks can be added safely.
-
-
-# func_options [ARG]...
-# ---------------------
-# All the functions called inside func_options are hookable. See the
-# individual implementations for details.
-func_hookable func_options
-func_options ()
-{
-    $debug_cmd
-
-    func_options_prep ${1+"$@"}
-    eval func_parse_options \
-        ${func_options_prep_result+"$func_options_prep_result"}
-    eval func_validate_options \
-        ${func_parse_options_result+"$func_parse_options_result"}
-
-    eval func_run_hooks func_options \
-        ${func_validate_options_result+"$func_validate_options_result"}
-
-    # save modified positional parameters for caller
-    func_options_result=$func_run_hooks_result
-}
-
-
-# func_options_prep [ARG]...
-# --------------------------
-# All initialisations required before starting the option parse loop.
-# Note that when calling hook functions, we pass through the list of
-# positional parameters.  If a hook function modifies that list, and
-# needs to propogate that back to rest of this script, then the complete
-# modified list must be put in 'func_run_hooks_result' before
-# returning.
-func_hookable func_options_prep
-func_options_prep ()
-{
-    $debug_cmd
-
-    # Option defaults:
-    opt_verbose=false
-    opt_warning_types=
-
-    func_run_hooks func_options_prep ${1+"$@"}
-
-    # save modified positional parameters for caller
-    func_options_prep_result=$func_run_hooks_result
-}
-
-
-# func_parse_options [ARG]...
-# ---------------------------
-# The main option parsing loop.
-func_hookable func_parse_options
-func_parse_options ()
-{
-    $debug_cmd
-
-    func_parse_options_result=
-
-    # this just eases exit handling
-    while test $# -gt 0; do
-      # Defer to hook functions for initial option parsing, so they
-      # get priority in the event of reusing an option name.
-      func_run_hooks func_parse_options ${1+"$@"}
-
-      # Adjust func_parse_options positional parameters to match
-      eval set dummy "$func_run_hooks_result"; shift
-
-      # Break out of the loop if we already parsed every option.
-      test $# -gt 0 || break
-
-      _G_opt=$1
-      shift
-      case $_G_opt in
-        --debug|-x)   debug_cmd='set -x'
-                      func_echo "enabling shell trace mode"
-                      $debug_cmd
-                      ;;
-
-        --no-warnings|--no-warning|--no-warn)
-                      set dummy --warnings none ${1+"$@"}
-                      shift
-		      ;;
-
-        --warnings|--warning|-W)
-                      test $# = 0 && func_missing_arg $_G_opt && break
-                      case " $warning_categories $1" in
-                        *" $1 "*)
-                          # trailing space prevents matching last $1 above
-                          func_append_uniq opt_warning_types " $1"
-                          ;;
-                        *all)
-                          opt_warning_types=$warning_categories
-                          ;;
-                        *none)
-                          opt_warning_types=none
-                          warning_func=:
-                          ;;
-                        *error)
-                          opt_warning_types=$warning_categories
-                          warning_func=func_fatal_error
-                          ;;
-                        *)
-                          func_fatal_error \
-                             "unsupported warning category: '$1'"
-                          ;;
-                      esac
-                      shift
-                      ;;
-
-        --verbose|-v) opt_verbose=: ;;
-        --version)    func_version ;;
-        -\?|-h)       func_usage ;;
-        --help)       func_help ;;
-
-	# Separate optargs to long options (plugins may need this):
-	--*=*)        func_split_equals "$_G_opt"
-	              set dummy "$func_split_equals_lhs" \
-                          "$func_split_equals_rhs" ${1+"$@"}
-                      shift
-                      ;;
-
-       # Separate optargs to short options:
-        -W*)
-                      func_split_short_opt "$_G_opt"
-                      set dummy "$func_split_short_opt_name" \
-                          "$func_split_short_opt_arg" ${1+"$@"}
-                      shift
-                      ;;
-
-        # Separate non-argument short options:
-        -\?*|-h*|-v*|-x*)
-                      func_split_short_opt "$_G_opt"
-                      set dummy "$func_split_short_opt_name" \
-                          "-$func_split_short_opt_arg" ${1+"$@"}
-                      shift
-                      ;;
-
-        --)           break ;;
-        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
-        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
-      esac
-    done
-
-    # save modified positional parameters for caller
-    func_quote_for_eval ${1+"$@"}
-    func_parse_options_result=$func_quote_for_eval_result
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
 }
 
 
-# func_validate_options [ARG]...
-# ------------------------------
-# Perform any sanity checks on option settings and/or unconsumed
-# arguments.
-func_hookable func_validate_options
-func_validate_options ()
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
 {
-    $debug_cmd
-
-    # Display all warnings if -W was not given.
-    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+    $opt_debug
 
-    func_run_hooks func_validate_options ${1+"$@"}
-
-    # Bail if the options were screwed!
-    $exit_cmd $EXIT_FAILURE
-
-    # save modified positional parameters for caller
-    func_validate_options_result=$func_run_hooks_result
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
 }
 
-
-
-## ----------------- ##
-## Helper functions. ##
-## ----------------- ##
-
-# This section contains the helper functions used by the rest of the
-# hookable option parser framework in ascii-betical order.
-
-
-# func_fatal_help ARG...
-# ----------------------
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
 {
-    $debug_cmd
+    $opt_debug
 
-    eval \$ECHO \""Usage: $usage"\"
-    eval \$ECHO \""$fatal_help"\"
-    func_error ${1+"$@"}
-    exit $EXIT_FAILURE
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    echo
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
 }
 
-
-# func_help
-# ---------
-# Echo long help message to standard output and exit.
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
 func_help ()
 {
-    $debug_cmd
-
-    func_usage_message
-    $ECHO "$long_help_message"
-    exit 0
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+	p
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
 }
 
-
-# func_missing_arg ARGNAME
-# ------------------------
+# func_missing_arg argname
 # Echo program name prefixed message to standard error and set global
 # exit_cmd.
 func_missing_arg ()
 {
-    $debug_cmd
+    $opt_debug
 
-    func_error "Missing argument for '$1'."
+    func_error "missing argument for $1."
     exit_cmd=exit
 }
 
 
-# func_split_equals STRING
-# ------------------------
-# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
-# splitting STRING at the '=' sign.
-test -z "$_G_HAVE_XSI_OPS" \
-    && (eval 'x=a/b/c;
-      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
-    && _G_HAVE_XSI_OPS=yes
-
-if test yes = "$_G_HAVE_XSI_OPS"
-then
-  # This is an XSI compatible shell, allowing a faster implementation...
-  eval 'func_split_equals ()
-  {
-      $debug_cmd
-
-      func_split_equals_lhs=${1%%=*}
-      func_split_equals_rhs=${1#*=}
-      test "x$func_split_equals_lhs" = "x$1" \
-        && func_split_equals_rhs=
-  }'
-else
-  # ...otherwise fall back to using expr, which is often a shell builtin.
-  func_split_equals ()
-  {
-      $debug_cmd
-
-      func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
-      func_split_equals_rhs=
-      test "x$func_split_equals_lhs" = "x$1" \
-        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
-  }
-fi #func_split_equals
-
-
-# func_split_short_opt SHORTOPT
-# -----------------------------
+# func_split_short_opt shortopt
 # Set func_split_short_opt_name and func_split_short_opt_arg shell
 # variables after splitting SHORTOPT after the 2nd character.
-if test yes = "$_G_HAVE_XSI_OPS"
-then
-  # This is an XSI compatible shell, allowing a faster implementation...
-  eval 'func_split_short_opt ()
-  {
-      $debug_cmd
-
-      func_split_short_opt_arg=${1#??}
-      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
-  }'
-else
-  # ...otherwise fall back to using expr, which is often a shell builtin.
-  func_split_short_opt ()
-  {
-      $debug_cmd
-
-      func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
-      func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
-  }
-fi #func_split_short_opt
-
-
-# func_usage
-# ----------
-# Echo short help message to standard output and exit.
-func_usage ()
+func_split_short_opt ()
 {
-    $debug_cmd
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
 
-    func_usage_message
-    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
-    exit 0
-}
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
 
 
-# func_usage_message
-# ------------------
-# Echo short help message to standard output.
-func_usage_message ()
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
 {
-    $debug_cmd
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
 
-    eval \$ECHO \""Usage: $usage"\"
-    echo
-    $SED -n 's|^# ||
-        /^Written by/{
-          x;p;x
-        }
-	h
-	/^Written by/q' < "$progpath"
-    echo
-    eval \$ECHO \""$usage_message"\"
-}
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
 
+exit_cmd=:
 
-# func_version
-# ------------
-# Echo version message to standard output and exit.
-func_version ()
-{
-    $debug_cmd
 
-    printf '%s\n' "$progname $scriptversion"
-    $SED -n '
-        /(C)/!b go
-        :more
-        /\./!{
-          N
-          s|\n# | |
-          b more
-        }
-        :go
-        /^# Written by /,/# warranty; / {
-          s|^# ||
-          s|^# *$||
-          s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
-          p
-        }
-        /^# Written by / {
-          s|^# ||
-          p
-        }
-        /^warranty; /q' < "$progpath"
 
-    exit $?
-}
 
 
-# Local variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
-# time-stamp-time-zone: "UTC"
-# End:
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
 
-# Set a version string.
-scriptversion='(GNU libtool) 2.4.6'
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
 
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
 
-# func_echo ARG...
-# ----------------
-# Libtool also displays the current mode in messages, so override
-# funclib.sh func_echo with this custom definition.
-func_echo ()
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
 {
-    $debug_cmd
-
-    _G_message=$*
-
-    func_echo_IFS=$IFS
-    IFS=$nl
-    for _G_line in $_G_message; do
-      IFS=$func_echo_IFS
-      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
-    done
-    IFS=$func_echo_IFS
-}
+    eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
 
-
-# func_warning ARG...
-# -------------------
-# Libtool warnings are not categorized, so override funclib.sh
-# func_warning with this simpler definition.
-func_warning ()
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
 {
-    $debug_cmd
+    func_quote_for_eval "${2}"
+    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
 
-    $warning_func ${1+"$@"}
-}
-
-
-## ---------------- ##
-## Options parsing. ##
-## ---------------- ##
-
-# Hook in the functions to make sure our own options are parsed during
-# the option parsing loop.
-
-usage='$progpath [OPTION]... [MODE-ARG]...'
-
-# Short help message in response to '-h'.
-usage_message="Options:
-       --config             show all configuration variables
-       --debug              enable verbose shell tracing
-   -n, --dry-run            display commands without modifying any files
-       --features           display basic configuration information and exit
-       --mode=MODE          use operation mode MODE
-       --no-warnings        equivalent to '-Wnone'
-       --preserve-dup-deps  don't remove duplicate dependency libraries
-       --quiet, --silent    don't print informational messages
-       --tag=TAG            use configuration variables from tag TAG
-   -v, --verbose            print more informational messages than default
-       --version            print version information
-   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
-   -h, --help, --help-all   print short, long, or detailed help message
-"
 
-# Additional text appended to 'usage_message' in response to '--help'.
-func_help ()
+# func_arith arithmetic-term...
+func_arith ()
 {
-    $debug_cmd
-
-    func_usage_message
-    $ECHO "$long_help_message
-
-MODE must be one of the following:
-
-       clean           remove files from the build directory
-       compile         compile a source file into a libtool object
-       execute         automatically set library path, then run a program
-       finish          complete the installation of libtool libraries
-       install         install libraries or executables
-       link            create a library or an executable
-       uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  When passed as first option,
-'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
-Try '$progname --help --mode=MODE' for a more detailed description of MODE.
-
-When reporting a bug, please describe a test case to reproduce it and
-include the following information:
-
-       host-triplet:   $host
-       shell:          $SHELL
-       compiler:       $LTCC
-       compiler flags: $LTCFLAGS
-       linker:         $LD (gnu? $with_gnu_ld)
-       version:        $progname (GNU libtool) 2.4.6
-       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
-       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
-
-Report bugs to <bug-libtool@gnu.org>.
-GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-General help using GNU software: <http://www.gnu.org/gethelp/>."
-    exit 0
-}
+    func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
 
 
-# func_lo2o OBJECT-NAME
-# ---------------------
-# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
-# object suffix.
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
 
-lo2o=s/\\.lo\$/.$objext/
-o2lo=s/\\.$objext\$/.lo/
 
-if test yes = "$_G_HAVE_XSI_OPS"; then
-  eval 'func_lo2o ()
-  {
-    case $1 in
-      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
-      *   ) func_lo2o_result=$1               ;;
-    esac
-  }'
+# func_lo2o object
+func_lo2o ()
+{
+    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
 
-  # func_xform LIBOBJ-OR-SOURCE
-  # ---------------------------
-  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
-  # suffix to a '.lo' libtool-object suffix.
-  eval 'func_xform ()
-  {
-    func_xform_result=${1%.*}.lo
-  }'
-else
-  # ...otherwise fall back to using sed.
-  func_lo2o ()
-  {
-    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
-  }
 
-  func_xform ()
-  {
-    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
-  }
-fi
+# func_xform libobj-or-source
+func_xform ()
+{
+    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
 
 
-# func_fatal_configuration ARG...
-# -------------------------------
+# func_fatal_configuration arg...
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
 func_fatal_configuration ()
 {
-    func__fatal_error ${1+"$@"} \
-      "See the $PACKAGE documentation for more information." \
-      "Fatal configuration error."
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
 }
 
 
 # func_config
-# -----------
 # Display the configuration for all the tags in this script.
 func_config ()
 {
@@ -2149,19 +915,17 @@ func_config ()
     exit $?
 }
 
-
 # func_features
-# -------------
 # Display the features supported by this script.
 func_features ()
 {
     echo "host: $host"
-    if test yes = "$build_libtool_libs"; then
+    if test "$build_libtool_libs" = yes; then
       echo "enable shared libraries"
     else
       echo "disable shared libraries"
     fi
-    if test yes = "$build_old_libs"; then
+    if test "$build_old_libs" = yes; then
       echo "enable static libraries"
     else
       echo "disable static libraries"
@@ -2170,297 +934,289 @@ func_features ()
     exit $?
 }
 
-
-# func_enable_tag TAGNAME
-# -----------------------
+# func_enable_tag tagname
 # Verify that TAGNAME is valid, and either flag an error and exit, or
 # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
 # variable here.
 func_enable_tag ()
 {
-    # Global variable:
-    tagname=$1
+  # Global variable:
+  tagname="$1"
 
-    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-    sed_extractcf=/$re_begincf/,/$re_endcf/p
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
 
-    # Validate tagname.
-    case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-        func_fatal_error "invalid tag name: $tagname"
-        ;;
-    esac
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
 
-    # Don't test for the "default" C tag, as we know it's
-    # there but not specially marked.
-    case $tagname in
-        CC) ;;
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
     *)
-        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-	  taglist="$taglist $tagname"
-
-	  # Evaluate the configuration.  Be careful to quote the path
-	  # and the sed script, to avoid splitting on whitespace, but
-	  # also don't use non-portable quotes within backquotes within
-	  # quotes we have to do it in 2 steps:
-	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-	  eval "$extractedcf"
-        else
-	  func_error "ignoring unknown tag $tagname"
-        fi
-        ;;
-    esac
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
 }
 
-
 # func_check_version_match
-# ------------------------
 # Ensure that we are using m4 macros, and libtool script from the same
 # release of libtool.
 func_check_version_match ()
 {
-    if test "$package_revision" != "$macro_revision"; then
-      if test "$VERSION" != "$macro_version"; then
-        if test -z "$macro_version"; then
-          cat >&2 <<_LT_EOF
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from an older release.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
-        else
-          cat >&2 <<_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
-        fi
-      else
-        cat >&2 <<_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
 $progname: but the definition of this LT_INIT comes from revision $macro_revision.
 $progname: You should recreate aclocal.m4 with macros from revision $package_revision
 $progname: of $PACKAGE $VERSION and run autoconf again.
 _LT_EOF
-      fi
-
-      exit $EXIT_MISMATCH
     fi
-}
 
+    exit $EXIT_MISMATCH
+  fi
+}
 
-# libtool_options_prep [ARG]...
-# -----------------------------
-# Preparation for options parsed by libtool.
-libtool_options_prep ()
-{
-    $debug_mode
 
-    # Option defaults:
-    opt_config=false
-    opt_dlopen=
-    opt_dry_run=false
-    opt_help=false
-    opt_mode=
-    opt_preserve_dup_deps=false
-    opt_quiet=false
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+  shift; set dummy --mode clean ${1+"$@"}; shift
+  ;;
+compile|compil|compi|comp|com|co|c)
+  shift; set dummy --mode compile ${1+"$@"}; shift
+  ;;
+execute|execut|execu|exec|exe|ex|e)
+  shift; set dummy --mode execute ${1+"$@"}; shift
+  ;;
+finish|finis|fini|fin|fi|f)
+  shift; set dummy --mode finish ${1+"$@"}; shift
+  ;;
+install|instal|insta|inst|ins|in|i)
+  shift; set dummy --mode install ${1+"$@"}; shift
+  ;;
+link|lin|li|l)
+  shift; set dummy --mode link ${1+"$@"}; shift
+  ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+  shift; set dummy --mode uninstall ${1+"$@"}; shift
+  ;;
+esac
 
-    nonopt=
-    preserve_args=
 
-    # Shorthand for --mode=foo, only valid as the first argument
-    case $1 in
-    clean|clea|cle|cl)
-      shift; set dummy --mode clean ${1+"$@"}; shift
-      ;;
-    compile|compil|compi|comp|com|co|c)
-      shift; set dummy --mode compile ${1+"$@"}; shift
-      ;;
-    execute|execut|execu|exec|exe|ex|e)
-      shift; set dummy --mode execute ${1+"$@"}; shift
-      ;;
-    finish|finis|fini|fin|fi|f)
-      shift; set dummy --mode finish ${1+"$@"}; shift
-      ;;
-    install|instal|insta|inst|ins|in|i)
-      shift; set dummy --mode install ${1+"$@"}; shift
-      ;;
-    link|lin|li|l)
-      shift; set dummy --mode link ${1+"$@"}; shift
-      ;;
-    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-      shift; set dummy --mode uninstall ${1+"$@"}; shift
-      ;;
-    esac
 
-    # Pass back the list of options.
-    func_quote_for_eval ${1+"$@"}
-    libtool_options_prep_result=$func_quote_for_eval_result
-}
-func_add_hook func_options_prep libtool_options_prep
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
 
 
-# libtool_parse_options [ARG]...
-# ---------------------------------
-# Provide handling for libtool specific options.
-libtool_parse_options ()
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
 {
-    $debug_cmd
+  # this just eases exit handling
+  while test $# -gt 0; do
+    opt="$1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+      --dry-run|--dryrun|-n)
+			opt_dry_run=:
+			;;
+      --config)
+			opt_config=:
+func_config
+			;;
+      --dlopen|-dlopen)
+			optarg="$1"
+			opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+			shift
+			;;
+      --preserve-dup-deps)
+			opt_preserve_dup_deps=:
+			;;
+      --features)
+			opt_features=:
+func_features
+			;;
+      --finish)
+			opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+			;;
+      --help)
+			opt_help=:
+			;;
+      --help-all)
+			opt_help_all=:
+opt_help=': help-all'
+			;;
+      --mode)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_mode="$optarg"
+case $optarg in
+  # Valid mode arguments:
+  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+  # Catch anything else as an error
+  *) func_error "invalid argument for $opt"
+     exit_cmd=exit
+     break
+     ;;
+esac
+			shift
+			;;
+      --no-silent|--no-quiet)
+			opt_silent=false
+func_append preserve_args " $opt"
+			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+func_append preserve_args " $opt"
+			;;
+      --no-verbose)
+			opt_verbose=false
+func_append preserve_args " $opt"
+			;;
+      --silent|--quiet)
+			opt_silent=:
+func_append preserve_args " $opt"
+        opt_verbose=false
+			;;
+      --verbose|-v)
+			opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+			;;
+      --tag)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+			shift
+			;;
+
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      # Separate non-argument short options:
+      -\?*|-h*|-n*|-v*)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    esac
+  done
 
-    # Perform our own loop to consume as many options as possible in
-    # each iteration.
-    while test $# -gt 0; do
-      _G_opt=$1
-      shift
-      case $_G_opt in
-        --dry-run|--dryrun|-n)
-                        opt_dry_run=:
-                        ;;
-
-        --config)       func_config ;;
-
-        --dlopen|-dlopen)
-                        opt_dlopen="${opt_dlopen+$opt_dlopen
-}$1"
-                        shift
-                        ;;
-
-        --preserve-dup-deps)
-                        opt_preserve_dup_deps=: ;;
-
-        --features)     func_features ;;
-
-        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;
-
-        --help)         opt_help=: ;;
-
-        --help-all)     opt_help=': help-all' ;;
-
-        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
-                        opt_mode=$1
-                        case $1 in
-                          # Valid mode arguments:
-                          clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
-                          # Catch anything else as an error
-                          *) func_error "invalid argument for $_G_opt"
-                             exit_cmd=exit
-                             break
-                             ;;
-                        esac
-                        shift
-                        ;;
-
-        --no-silent|--no-quiet)
-                        opt_quiet=false
-                        func_append preserve_args " $_G_opt"
-                        ;;
-
-        --no-warnings|--no-warning|--no-warn)
-                        opt_warning=false
-                        func_append preserve_args " $_G_opt"
-                        ;;
-
-        --no-verbose)
-                        opt_verbose=false
-                        func_append preserve_args " $_G_opt"
-                        ;;
-
-        --silent|--quiet)
-                        opt_quiet=:
-                        opt_verbose=false
-                        func_append preserve_args " $_G_opt"
-                        ;;
-
-        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
-                        opt_tag=$1
-                        func_append preserve_args " $_G_opt $1"
-                        func_enable_tag "$1"
-                        shift
-                        ;;
-
-        --verbose|-v)   opt_quiet=false
-                        opt_verbose=:
-                        func_append preserve_args " $_G_opt"
-                        ;;
-
-	# An option not handled by this hook function:
-        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
-      esac
-    done
+  # Validate options:
 
+  # save first non-option argument
+  if test "$#" -gt 0; then
+    nonopt="$opt"
+    shift
+  fi
 
-    # save modified positional parameters for caller
-    func_quote_for_eval ${1+"$@"}
-    libtool_parse_options_result=$func_quote_for_eval_result
-}
-func_add_hook func_parse_options libtool_parse_options
+  # preserve --debug
+  test "$opt_debug" = : || func_append preserve_args " --debug"
 
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      ;;
+  esac
 
+  $opt_help || {
+    # Sanity checks first:
+    func_check_version_match
 
-# libtool_validate_options [ARG]...
-# ---------------------------------
-# Perform any sanity checks on option settings and/or unconsumed
-# arguments.
-libtool_validate_options ()
-{
-    # save first non-option argument
-    if test 0 -lt $#; then
-      nonopt=$1
-      shift
+    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+      func_fatal_configuration "not configured to build any kind of library"
     fi
 
-    # preserve --debug
-    test : = "$debug_cmd" || func_append preserve_args " --debug"
+    # Darwin sucks
+    eval std_shrext=\"$shrext_cmds\"
 
-    case $host in
-      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
-      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
-      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
-        # don't eliminate duplications in $postdeps and $predeps
-        opt_duplicate_compiler_generated_deps=:
-        ;;
-      *)
-        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
-        ;;
-    esac
-
-    $opt_help || {
-      # Sanity checks first:
-      func_check_version_match
-
-      test yes != "$build_libtool_libs" \
-        && test yes != "$build_old_libs" \
-        && func_fatal_configuration "not configured to build any kind of library"
+    # Only execute mode is allowed to have -dlopen flags.
+    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+      func_error "unrecognized option \`-dlopen'"
+      $ECHO "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
 
-      # Darwin sucks
-      eval std_shrext=\"$shrext_cmds\"
+    # Change the help message to a mode-specific one.
+    generic_help="$help"
+    help="Try \`$progname --help --mode=$opt_mode' for more information."
+  }
 
-      # Only execute mode is allowed to have -dlopen flags.
-      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
-        func_error "unrecognized option '-dlopen'"
-        $ECHO "$help" 1>&2
-        exit $EXIT_FAILURE
-      fi
 
-      # Change the help message to a mode-specific one.
-      generic_help=$help
-      help="Try '$progname --help --mode=$opt_mode' for more information."
-    }
-
-    # Pass back the unparsed argument list
-    func_quote_for_eval ${1+"$@"}
-    libtool_validate_options_result=$func_quote_for_eval_result
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
 }
-func_add_hook func_validate_options libtool_validate_options
-
 
-# Process options as early as possible so that --help and --version
-# can return quickly.
-func_options ${1+"$@"}
-eval set dummy "$func_options_result"; shift
 
 
 
@@ -2468,52 +1224,24 @@ eval set dummy "$func_options_result"; shift
 ##    Main.    ##
 ## ----------- ##
 
-magic='%%%MAGIC variable%%%'
-magic_exe='%%%MAGIC EXE variable%%%'
-
-# Global variables.
-extracted_archives=
-extracted_serial=0
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# func_generated_by_libtool
-# True iff stdin has been generated by Libtool. This function is only
-# a basic sanity check; it will hardly flush out determined imposters.
-func_generated_by_libtool_p ()
-{
-  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-}
-
 # func_lalib_p file
-# True iff FILE is a libtool '.la' library or '.lo' object file.
+# True iff FILE is a libtool `.la' library or `.lo' object file.
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_lalib_p ()
 {
     test -f "$1" &&
-      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
 }
 
 # func_lalib_unsafe_p file
-# True iff FILE is a libtool '.la' library or '.lo' object file.
+# True iff FILE is a libtool `.la' library or `.lo' object file.
 # This function implements the same check as func_lalib_p without
 # resorting to external programs.  To this end, it redirects stdin and
 # closes it afterwards, without saving the original file descriptor.
 # As a safety measure, use it only where a negative result would be
-# fatal anyway.  Works if 'file' does not exist.
+# fatal anyway.  Works if `file' does not exist.
 func_lalib_unsafe_p ()
 {
     lalib_p=no
@@ -2521,13 +1249,13 @@ func_lalib_unsafe_p ()
 	for lalib_p_l in 1 2 3 4
 	do
 	    read lalib_p_line
-	    case $lalib_p_line in
+	    case "$lalib_p_line" in
 		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
 	    esac
 	done
 	exec 0<&5 5<&-
     fi
-    test yes = "$lalib_p"
+    test "$lalib_p" = yes
 }
 
 # func_ltwrapper_script_p file
@@ -2536,8 +1264,7 @@ func_lalib_unsafe_p ()
 # determined imposters.
 func_ltwrapper_script_p ()
 {
-    test -f "$1" &&
-      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
+    func_lalib_p "$1"
 }
 
 # func_ltwrapper_executable_p file
@@ -2562,7 +1289,7 @@ func_ltwrapper_scriptname ()
 {
     func_dirname_and_basename "$1" "" "."
     func_stripname '' '.exe' "$func_basename_result"
-    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
+    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
 }
 
 # func_ltwrapper_p file
@@ -2581,13 +1308,11 @@ func_ltwrapper_p ()
 # FAIL_CMD may read-access the current command in variable CMD!
 func_execute_cmds ()
 {
-    $debug_cmd
-
+    $opt_debug
     save_ifs=$IFS; IFS='~'
     for cmd in $1; do
-      IFS=$sp$nl
-      eval cmd=\"$cmd\"
       IFS=$save_ifs
+      eval cmd=\"$cmd\"
       func_show_eval "$cmd" "${2-:}"
     done
     IFS=$save_ifs
@@ -2599,11 +1324,10 @@ func_execute_cmds ()
 # Note that it is not necessary on cygwin/mingw to append a dot to
 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
 # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-# 'FILE.' does not work on cygwin managed mounts.
+# `FILE.' does not work on cygwin managed mounts.
 func_source ()
 {
-    $debug_cmd
-
+    $opt_debug
     case $1 in
     */* | *\\*)	. "$1" ;;
     *)		. "./$1" ;;
@@ -2630,10 +1354,10 @@ func_resolve_sysroot ()
 # store the result into func_replace_sysroot_result.
 func_replace_sysroot ()
 {
-  case $lt_sysroot:$1 in
+  case "$lt_sysroot:$1" in
   ?*:"$lt_sysroot"*)
     func_stripname "$lt_sysroot" '' "$1"
-    func_replace_sysroot_result='='$func_stripname_result
+    func_replace_sysroot_result="=$func_stripname_result"
     ;;
   *)
     # Including no sysroot.
@@ -2650,8 +1374,7 @@ func_replace_sysroot ()
 # arg is usually of the form 'gcc ...'
 func_infer_tag ()
 {
-    $debug_cmd
-
+    $opt_debug
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
@@ -2670,7 +1393,7 @@ func_infer_tag ()
 	for z in $available_tags; do
 	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
 	    # Evaluate the configuration.
-	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
 	    CC_quoted=
 	    for arg in $CC; do
 	      # Double-quote args containing other shell metacharacters.
@@ -2695,7 +1418,7 @@ func_infer_tag ()
 	# line option must be used.
 	if test -z "$tagname"; then
 	  func_echo "unable to infer tagged configuration"
-	  func_fatal_error "specify a tag with '--tag'"
+	  func_fatal_error "specify a tag with \`--tag'"
 #	else
 #	  func_verbose "using $tagname tagged configuration"
 	fi
@@ -2711,15 +1434,15 @@ func_infer_tag ()
 # but don't create it if we're doing a dry run.
 func_write_libtool_object ()
 {
-    write_libobj=$1
-    if test yes = "$build_libtool_libs"; then
-      write_lobj=\'$2\'
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
     else
       write_lobj=none
     fi
 
-    if test yes = "$build_old_libs"; then
-      write_oldobj=\'$3\'
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
     else
       write_oldobj=none
     fi
@@ -2727,7 +1450,7 @@ func_write_libtool_object ()
     $opt_dry_run || {
       cat >${write_libobj}T <<EOF
 # $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -2739,7 +1462,7 @@ pic_object=$write_lobj
 non_pic_object=$write_oldobj
 
 EOF
-      $MV "${write_libobj}T" "$write_libobj"
+      $MV "${write_libobj}T" "${write_libobj}"
     }
 }
 
@@ -2759,9 +1482,8 @@ EOF
 # be empty on error (or when ARG is empty)
 func_convert_core_file_wine_to_w32 ()
 {
-  $debug_cmd
-
-  func_convert_core_file_wine_to_w32_result=$1
+  $opt_debug
+  func_convert_core_file_wine_to_w32_result="$1"
   if test -n "$1"; then
     # Unfortunately, winepath does not exit with a non-zero error code, so we
     # are forced to check the contents of stdout. On the other hand, if the
@@ -2769,9 +1491,9 @@ func_convert_core_file_wine_to_w32 ()
     # *an error message* to stdout. So we must check for both error code of
     # zero AND non-empty stdout, which explains the odd construction:
     func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
+    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
       func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-        $SED -e "$sed_naive_backslashify"`
+        $SED -e "$lt_sed_naive_backslashify"`
     else
       func_convert_core_file_wine_to_w32_result=
     fi
@@ -2792,19 +1514,18 @@ func_convert_core_file_wine_to_w32 ()
 # are convertible, then the result may be empty.
 func_convert_core_path_wine_to_w32 ()
 {
-  $debug_cmd
-
+  $opt_debug
   # unfortunately, winepath doesn't convert paths, only file names
-  func_convert_core_path_wine_to_w32_result=
+  func_convert_core_path_wine_to_w32_result=""
   if test -n "$1"; then
     oldIFS=$IFS
     IFS=:
     for func_convert_core_path_wine_to_w32_f in $1; do
       IFS=$oldIFS
       func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-      if test -n "$func_convert_core_file_wine_to_w32_result"; then
+      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
         if test -z "$func_convert_core_path_wine_to_w32_result"; then
-          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
+          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
         else
           func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
         fi
@@ -2833,8 +1554,7 @@ func_convert_core_path_wine_to_w32 ()
 # environment variable; do not put it in $PATH.
 func_cygpath ()
 {
-  $debug_cmd
-
+  $opt_debug
   if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
     func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
     if test "$?" -ne 0; then
@@ -2843,7 +1563,7 @@ func_cygpath ()
     fi
   else
     func_cygpath_result=
-    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
+    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
   fi
 }
 #end: func_cygpath
@@ -2854,11 +1574,10 @@ func_cygpath ()
 # result in func_convert_core_msys_to_w32_result.
 func_convert_core_msys_to_w32 ()
 {
-  $debug_cmd
-
+  $opt_debug
   # awkward: cmd appends spaces to result
   func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
+    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
 }
 #end: func_convert_core_msys_to_w32
 
@@ -2869,14 +1588,13 @@ func_convert_core_msys_to_w32 ()
 # func_to_host_file_result to ARG1).
 func_convert_file_check ()
 {
-  $debug_cmd
-
-  if test -z "$2" && test -n "$1"; then
+  $opt_debug
+  if test -z "$2" && test -n "$1" ; then
     func_error "Could not determine host file name corresponding to"
-    func_error "  '$1'"
+    func_error "  \`$1'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback:
-    func_to_host_file_result=$1
+    func_to_host_file_result="$1"
   fi
 }
 # end func_convert_file_check
@@ -2888,11 +1606,10 @@ func_convert_file_check ()
 # func_to_host_file_result to a simplistic fallback value (see below).
 func_convert_path_check ()
 {
-  $debug_cmd
-
+  $opt_debug
   if test -z "$4" && test -n "$3"; then
     func_error "Could not determine the host path corresponding to"
-    func_error "  '$3'"
+    func_error "  \`$3'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback.  This is a deliberately simplistic "conversion" and
     # should not be "improved".  See libtool.info.
@@ -2901,7 +1618,7 @@ func_convert_path_check ()
       func_to_host_path_result=`echo "$3" |
         $SED -e "$lt_replace_pathsep_chars"`
     else
-      func_to_host_path_result=$3
+      func_to_host_path_result="$3"
     fi
   fi
 }
@@ -2913,10 +1630,9 @@ func_convert_path_check ()
 # and appending REPL if ORIG matches BACKPAT.
 func_convert_path_front_back_pathsep ()
 {
-  $debug_cmd
-
+  $opt_debug
   case $4 in
-  $1 ) func_to_host_path_result=$3$func_to_host_path_result
+  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
     ;;
   esac
   case $4 in
@@ -2930,7 +1646,7 @@ func_convert_path_front_back_pathsep ()
 ##################################################
 # $build to $host FILE NAME CONVERSION FUNCTIONS #
 ##################################################
-# invoked via '$to_host_file_cmd ARG'
+# invoked via `$to_host_file_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # Result will be available in $func_to_host_file_result.
@@ -2941,8 +1657,7 @@ func_convert_path_front_back_pathsep ()
 # in func_to_host_file_result.
 func_to_host_file ()
 {
-  $debug_cmd
-
+  $opt_debug
   $to_host_file_cmd "$1"
 }
 # end func_to_host_file
@@ -2954,8 +1669,7 @@ func_to_host_file ()
 # in (the comma separated) LAZY, no conversion takes place.
 func_to_tool_file ()
 {
-  $debug_cmd
-
+  $opt_debug
   case ,$2, in
     *,"$to_tool_file_cmd",*)
       func_to_tool_file_result=$1
@@ -2973,7 +1687,7 @@ func_to_tool_file ()
 # Copy ARG to func_to_host_file_result.
 func_convert_file_noop ()
 {
-  func_to_host_file_result=$1
+  func_to_host_file_result="$1"
 }
 # end func_convert_file_noop
 
@@ -2984,12 +1698,11 @@ func_convert_file_noop ()
 # func_to_host_file_result.
 func_convert_file_msys_to_w32 ()
 {
-  $debug_cmd
-
-  func_to_host_file_result=$1
+  $opt_debug
+  func_to_host_file_result="$1"
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
-    func_to_host_file_result=$func_convert_core_msys_to_w32_result
+    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -3001,9 +1714,8 @@ func_convert_file_msys_to_w32 ()
 # func_to_host_file_result.
 func_convert_file_cygwin_to_w32 ()
 {
-  $debug_cmd
-
-  func_to_host_file_result=$1
+  $opt_debug
+  func_to_host_file_result="$1"
   if test -n "$1"; then
     # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
     # LT_CYGPATH in this case.
@@ -3019,12 +1731,11 @@ func_convert_file_cygwin_to_w32 ()
 # and a working winepath. Returns result in func_to_host_file_result.
 func_convert_file_nix_to_w32 ()
 {
-  $debug_cmd
-
-  func_to_host_file_result=$1
+  $opt_debug
+  func_to_host_file_result="$1"
   if test -n "$1"; then
     func_convert_core_file_wine_to_w32 "$1"
-    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
+    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -3036,13 +1747,12 @@ func_convert_file_nix_to_w32 ()
 # Returns result in func_to_host_file_result.
 func_convert_file_msys_to_cygwin ()
 {
-  $debug_cmd
-
-  func_to_host_file_result=$1
+  $opt_debug
+  func_to_host_file_result="$1"
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
     func_cygpath -u "$func_convert_core_msys_to_w32_result"
-    func_to_host_file_result=$func_cygpath_result
+    func_to_host_file_result="$func_cygpath_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -3055,14 +1765,13 @@ func_convert_file_msys_to_cygwin ()
 # in func_to_host_file_result.
 func_convert_file_nix_to_cygwin ()
 {
-  $debug_cmd
-
-  func_to_host_file_result=$1
+  $opt_debug
+  func_to_host_file_result="$1"
   if test -n "$1"; then
     # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
     func_convert_core_file_wine_to_w32 "$1"
     func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-    func_to_host_file_result=$func_cygpath_result
+    func_to_host_file_result="$func_cygpath_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -3072,7 +1781,7 @@ func_convert_file_nix_to_cygwin ()
 #############################################
 # $build to $host PATH CONVERSION FUNCTIONS #
 #############################################
-# invoked via '$to_host_path_cmd ARG'
+# invoked via `$to_host_path_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # The result will be available in $func_to_host_path_result.
@@ -3096,11 +1805,10 @@ func_convert_file_nix_to_cygwin ()
 to_host_path_cmd=
 func_init_to_host_path_cmd ()
 {
-  $debug_cmd
-
+  $opt_debug
   if test -z "$to_host_path_cmd"; then
     func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-    to_host_path_cmd=func_convert_path_$func_stripname_result
+    to_host_path_cmd="func_convert_path_${func_stripname_result}"
   fi
 }
 
@@ -3110,8 +1818,7 @@ func_init_to_host_path_cmd ()
 # in func_to_host_path_result.
 func_to_host_path ()
 {
-  $debug_cmd
-
+  $opt_debug
   func_init_to_host_path_cmd
   $to_host_path_cmd "$1"
 }
@@ -3122,7 +1829,7 @@ func_to_host_path ()
 # Copy ARG to func_to_host_path_result.
 func_convert_path_noop ()
 {
-  func_to_host_path_result=$1
+  func_to_host_path_result="$1"
 }
 # end func_convert_path_noop
 
@@ -3133,9 +1840,8 @@ func_convert_path_noop ()
 # func_to_host_path_result.
 func_convert_path_msys_to_w32 ()
 {
-  $debug_cmd
-
-  func_to_host_path_result=$1
+  $opt_debug
+  func_to_host_path_result="$1"
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from ARG.  MSYS
     # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
@@ -3143,7 +1849,7 @@ func_convert_path_msys_to_w32 ()
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result=$func_convert_core_msys_to_w32_result
+    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -3157,9 +1863,8 @@ func_convert_path_msys_to_w32 ()
 # func_to_host_file_result.
 func_convert_path_cygwin_to_w32 ()
 {
-  $debug_cmd
-
-  func_to_host_path_result=$1
+  $opt_debug
+  func_to_host_path_result="$1"
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
@@ -3178,15 +1883,14 @@ func_convert_path_cygwin_to_w32 ()
 # a working winepath.  Returns result in func_to_host_file_result.
 func_convert_path_nix_to_w32 ()
 {
-  $debug_cmd
-
-  func_to_host_path_result=$1
+  $opt_debug
+  func_to_host_path_result="$1"
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
+    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -3200,16 +1904,15 @@ func_convert_path_nix_to_w32 ()
 # Returns result in func_to_host_file_result.
 func_convert_path_msys_to_cygwin ()
 {
-  $debug_cmd
-
-  func_to_host_path_result=$1
+  $opt_debug
+  func_to_host_path_result="$1"
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-    func_to_host_path_result=$func_cygpath_result
+    func_to_host_path_result="$func_cygpath_result"
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -3224,9 +1927,8 @@ func_convert_path_msys_to_cygwin ()
 # func_to_host_file_result.
 func_convert_path_nix_to_cygwin ()
 {
-  $debug_cmd
-
-  func_to_host_path_result=$1
+  $opt_debug
+  func_to_host_path_result="$1"
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from
     # ARG. msys behavior is inconsistent here, cygpath turns them
@@ -3235,7 +1937,7 @@ func_convert_path_nix_to_cygwin ()
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-    func_to_host_path_result=$func_cygpath_result
+    func_to_host_path_result="$func_cygpath_result"
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -3244,31 +1946,13 @@ func_convert_path_nix_to_cygwin ()
 # end func_convert_path_nix_to_cygwin
 
 
-# func_dll_def_p FILE
-# True iff FILE is a Windows DLL '.def' file.
-# Keep in sync with _LT_DLL_DEF_P in libtool.m4
-func_dll_def_p ()
-{
-  $debug_cmd
-
-  func_dll_def_p_tmp=`$SED -n \
-    -e 's/^[	 ]*//' \
-    -e '/^\(;.*\)*$/d' \
-    -e 's/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p' \
-    -e q \
-    "$1"`
-  test DEF = "$func_dll_def_p_tmp"
-}
-
-
 # func_mode_compile arg...
 func_mode_compile ()
 {
-    $debug_cmd
-
+    $opt_debug
     # Get the compilation command and the source file.
     base_compile=
-    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
     suppress_opt=yes
     suppress_output=
     arg_mode=normal
@@ -3281,12 +1965,12 @@ func_mode_compile ()
       case $arg_mode in
       arg  )
 	# do not "continue".  Instead, add this to base_compile
-	lastarg=$arg
+	lastarg="$arg"
 	arg_mode=normal
 	;;
 
       target )
-	libobj=$arg
+	libobj="$arg"
 	arg_mode=normal
 	continue
 	;;
@@ -3296,7 +1980,7 @@ func_mode_compile ()
 	case $arg in
 	-o)
 	  test -n "$libobj" && \
-	    func_fatal_error "you cannot specify '-o' more than once"
+	    func_fatal_error "you cannot specify \`-o' more than once"
 	  arg_mode=target
 	  continue
 	  ;;
@@ -3325,12 +2009,12 @@ func_mode_compile ()
 	  func_stripname '-Wc,' '' "$arg"
 	  args=$func_stripname_result
 	  lastarg=
-	  save_ifs=$IFS; IFS=,
+	  save_ifs="$IFS"; IFS=','
 	  for arg in $args; do
-	    IFS=$save_ifs
+	    IFS="$save_ifs"
 	    func_append_quoted lastarg "$arg"
 	  done
-	  IFS=$save_ifs
+	  IFS="$save_ifs"
 	  func_stripname ' ' '' "$lastarg"
 	  lastarg=$func_stripname_result
 
@@ -3343,8 +2027,8 @@ func_mode_compile ()
 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
-	  lastarg=$srcfile
-	  srcfile=$arg
+	  lastarg="$srcfile"
+	  srcfile="$arg"
 	  ;;
 	esac  #  case $arg
 	;;
@@ -3359,13 +2043,13 @@ func_mode_compile ()
       func_fatal_error "you must specify an argument for -Xcompile"
       ;;
     target)
-      func_fatal_error "you must specify a target with '-o'"
+      func_fatal_error "you must specify a target with \`-o'"
       ;;
     *)
       # Get the name of the library object.
       test -z "$libobj" && {
 	func_basename "$srcfile"
-	libobj=$func_basename_result
+	libobj="$func_basename_result"
       }
       ;;
     esac
@@ -3385,7 +2069,7 @@ func_mode_compile ()
     case $libobj in
     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)
-      func_fatal_error "cannot determine name of library object from '$libobj'"
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
       ;;
     esac
 
@@ -3394,8 +2078,8 @@ func_mode_compile ()
     for arg in $later; do
       case $arg in
       -shared)
-	test yes = "$build_libtool_libs" \
-	  || func_fatal_configuration "cannot build a shared library"
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
 	build_old_libs=no
 	continue
 	;;
@@ -3421,17 +2105,17 @@ func_mode_compile ()
     func_quote_for_eval "$libobj"
     test "X$libobj" != "X$func_quote_for_eval_result" \
       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
-      && func_warning "libobj name '$libobj' may not contain shell special characters."
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
     func_dirname_and_basename "$obj" "/" ""
-    objname=$func_basename_result
-    xdir=$func_dirname_result
-    lobj=$xdir$objdir/$objname
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
+    lobj=${xdir}$objdir/$objname
 
     test -z "$base_compile" && \
       func_fatal_help "you must specify a compilation command"
 
     # Delete any leftover library objects.
-    if test yes = "$build_old_libs"; then
+    if test "$build_old_libs" = yes; then
       removelist="$obj $lobj $libobj ${libobj}T"
     else
       removelist="$lobj $libobj ${libobj}T"
@@ -3443,16 +2127,16 @@ func_mode_compile ()
       pic_mode=default
       ;;
     esac
-    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
       # non-PIC code in shared libraries is not supported
       pic_mode=default
     fi
 
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
-    if test no = "$compiler_c_o"; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
-      lockfile=$output_obj.lock
+    if test "$compiler_c_o" = no; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
     else
       output_obj=
       need_locks=no
@@ -3461,12 +2145,12 @@ func_mode_compile ()
 
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
-    if test yes = "$need_locks"; then
+    if test "$need_locks" = yes; then
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"
 	sleep 2
       done
-    elif test warn = "$need_locks"; then
+    elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then
 	$ECHO "\
 *** ERROR, $lockfile exists and contains:
@@ -3474,7 +2158,7 @@ func_mode_compile ()
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support '-c' and '-o' together.  If you
+your compiler does not support \`-c' and \`-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -3496,11 +2180,11 @@ compiler."
     qsrcfile=$func_quote_for_eval_result
 
     # Only build a PIC object if we are building libtool libraries.
-    if test yes = "$build_libtool_libs"; then
+    if test "$build_libtool_libs" = yes; then
       # Without this assignment, base_compile gets emptied.
       fbsd_hideous_sh_bug=$base_compile
 
-      if test no != "$pic_mode"; then
+      if test "$pic_mode" != no; then
 	command="$base_compile $qsrcfile $pic_flag"
       else
 	# Don't build PIC code
@@ -3517,7 +2201,7 @@ compiler."
       func_show_eval_locale "$command"	\
           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
-      if test warn = "$need_locks" &&
+      if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 	$ECHO "\
 *** ERROR, $lockfile contains:
@@ -3528,7 +2212,7 @@ $srcfile
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support '-c' and '-o' together.  If you
+your compiler does not support \`-c' and \`-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -3544,20 +2228,20 @@ compiler."
       fi
 
       # Allow error messages only from the first compilation.
-      if test yes = "$suppress_opt"; then
+      if test "$suppress_opt" = yes; then
 	suppress_output=' >/dev/null 2>&1'
       fi
     fi
 
     # Only build a position-dependent object if we build old libraries.
-    if test yes = "$build_old_libs"; then
-      if test yes != "$pic_mode"; then
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
 	# Don't build PIC code
 	command="$base_compile $qsrcfile$pie_flag"
       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
-      if test yes = "$compiler_c_o"; then
+      if test "$compiler_c_o" = yes; then
 	func_append command " -o $obj"
       fi
 
@@ -3566,7 +2250,7 @@ compiler."
       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
-      if test warn = "$need_locks" &&
+      if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 	$ECHO "\
 *** ERROR, $lockfile contains:
@@ -3577,7 +2261,7 @@ $srcfile
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support '-c' and '-o' together.  If you
+your compiler does not support \`-c' and \`-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -3597,7 +2281,7 @@ compiler."
       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
       # Unlock the critical section if it was locked
-      if test no != "$need_locks"; then
+      if test "$need_locks" != no; then
 	removelist=$lockfile
         $RM "$lockfile"
       fi
@@ -3607,7 +2291,7 @@ compiler."
 }
 
 $opt_help || {
-  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
+  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
@@ -3627,7 +2311,7 @@ func_mode_help ()
 Remove files from the build directory.
 
 RM is the name of the program to use to delete files associated with each FILE
-(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 to RM.
 
 If FILE is a libtool library, object or program, all the files associated
@@ -3646,16 +2330,16 @@ This mode accepts the following additional options:
   -no-suppress      do not suppress compiler output for multiple passes
   -prefer-pic       try to build PIC objects only
   -prefer-non-pic   try to build non-PIC objects only
-  -shared           do not build a '.o' file suitable for static linking
-  -static           only build a '.o' file suitable for static linking
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
   -Wc,FLAG          pass FLAG directly to the compiler
 
-COMPILE-COMMAND is a command to be used in creating a 'standard' object file
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
 
 The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix '.c' with the
-library object suffix, '.lo'."
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
         ;;
 
       execute)
@@ -3668,7 +2352,7 @@ This mode accepts the following additional options:
 
   -dlopen FILE      add the directory containing FILE to the library path
 
-This mode sets the library path environment variable according to '-dlopen'
+This mode sets the library path environment variable according to \`-dlopen'
 flags.
 
 If any of the ARGS are libtool executable wrappers, then they are translated
@@ -3687,7 +2371,7 @@ Complete the installation of libtool libraries.
 Each LIBDIR is a directory that contains libtool libraries.
 
 The commands that this mode executes may require superuser privileges.  Use
-the '--dry-run' option if you just want to see what would be executed."
+the \`--dry-run' option if you just want to see what would be executed."
         ;;
 
       install)
@@ -3697,7 +2381,7 @@ the '--dry-run' option if you just want to see what would be executed."
 Install executables or libraries.
 
 INSTALL-COMMAND is the installation command.  The first component should be
-either the 'install' or 'cp' program.
+either the \`install' or \`cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
@@ -3723,7 +2407,7 @@ The following components of LINK-COMMAND are treated specially:
   -avoid-version    do not add a version suffix if possible
   -bindir BINDIR    specify path to binaries directory (for systems where
                     libraries must be found in the PATH setting at runtime)
-  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
@@ -3737,8 +2421,7 @@ The following components of LINK-COMMAND are treated specially:
   -no-install       link a not-installable executable
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  use a list of object files found in FILE to specify objects
-  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
   -precious-files-regex REGEX
                     don't remove output files matching REGEX
   -release RELEASE  specify package release information
@@ -3758,20 +2441,20 @@ The following components of LINK-COMMAND are treated specially:
   -Xlinker FLAG     pass linker-specific FLAG directly to the linker
   -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
-All other options (arguments beginning with '-') are ignored.
+All other options (arguments beginning with \`-') are ignored.
 
-Every other argument is treated as a filename.  Files ending in '.la' are
+Every other argument is treated as a filename.  Files ending in \`.la' are
 treated as uninstalled libtool libraries, other files are standard or library
 object files.
 
-If the OUTPUT-FILE ends in '.la', then a libtool library is created,
-only library objects ('.lo' files) may be specified, and '-rpath' is
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
 required, except when creating a convenience library.
 
-If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
-using 'ar' and 'ranlib', or on Windows using 'lib'.
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
 
-If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
 is created, otherwise an executable program is created."
         ;;
 
@@ -3782,7 +2465,7 @@ is created, otherwise an executable program is created."
 Remove libraries from an installation directory.
 
 RM is the name of the program to use to delete files associated with each FILE
-(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 to RM.
 
 If FILE is a libtool library, all the files associated with it are deleted.
@@ -3790,17 +2473,17 @@ Otherwise, only FILE itself is deleted using RM."
         ;;
 
       *)
-        func_fatal_help "invalid operation mode '$opt_mode'"
+        func_fatal_help "invalid operation mode \`$opt_mode'"
         ;;
     esac
 
     echo
-    $ECHO "Try '$progname --help' for more information about other modes."
+    $ECHO "Try \`$progname --help' for more information about other modes."
 }
 
 # Now that we've collected a possible --mode arg, show help if necessary
 if $opt_help; then
-  if test : = "$opt_help"; then
+  if test "$opt_help" = :; then
     func_mode_help
   else
     {
@@ -3808,7 +2491,7 @@ if $opt_help; then
       for opt_mode in compile link execute install finish uninstall clean; do
 	func_mode_help
       done
-    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
     {
       func_help noexit
       for opt_mode in compile link execute install finish uninstall clean; do
@@ -3816,7 +2499,7 @@ if $opt_help; then
 	func_mode_help
       done
     } |
-    $SED '1d
+    sed '1d
       /^When reporting/,/^Report/{
 	H
 	d
@@ -3833,17 +2516,16 @@ fi
 # func_mode_execute arg...
 func_mode_execute ()
 {
-    $debug_cmd
-
+    $opt_debug
     # The first argument is the command name.
-    cmd=$nonopt
+    cmd="$nonopt"
     test -z "$cmd" && \
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
     for file in $opt_dlopen; do
       test -f "$file" \
-	|| func_fatal_help "'$file' is not a file"
+	|| func_fatal_help "\`$file' is not a file"
 
       dir=
       case $file in
@@ -3853,7 +2535,7 @@ func_mode_execute ()
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "'$lib' is not a valid libtool archive"
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
 
 	# Read the libtool library.
 	dlname=
@@ -3864,18 +2546,18 @@ func_mode_execute ()
 	if test -z "$dlname"; then
 	  # Warn if it was a shared library.
 	  test -n "$library_names" && \
-	    func_warning "'$file' was not linked with '-export-dynamic'"
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
 	  continue
 	fi
 
 	func_dirname "$file" "" "."
-	dir=$func_dirname_result
+	dir="$func_dirname_result"
 
 	if test -f "$dir/$objdir/$dlname"; then
 	  func_append dir "/$objdir"
 	else
 	  if test ! -f "$dir/$dlname"; then
-	    func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
 	  fi
 	fi
 	;;
@@ -3883,18 +2565,18 @@ func_mode_execute ()
       *.lo)
 	# Just add the directory containing the .lo file.
 	func_dirname "$file" "" "."
-	dir=$func_dirname_result
+	dir="$func_dirname_result"
 	;;
 
       *)
-	func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
 	continue
 	;;
       esac
 
       # Get the absolute pathname.
       absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir=$absdir
+      test -n "$absdir" && dir="$absdir"
 
       # Now add the directory to shlibpath_var.
       if eval "test -z \"\$$shlibpath_var\""; then
@@ -3906,7 +2588,7 @@ func_mode_execute ()
 
     # This variable tells wrapper scripts just to set shlibpath_var
     # rather than running their programs.
-    libtool_execute_magic=$magic
+    libtool_execute_magic="$magic"
 
     # Check if any of the arguments is a wrapper script.
     args=
@@ -3919,12 +2601,12 @@ func_mode_execute ()
 	if func_ltwrapper_script_p "$file"; then
 	  func_source "$file"
 	  # Transform arg to wrapped name.
-	  file=$progdir/$program
+	  file="$progdir/$program"
 	elif func_ltwrapper_executable_p "$file"; then
 	  func_ltwrapper_scriptname "$file"
 	  func_source "$func_ltwrapper_scriptname_result"
 	  # Transform arg to wrapped name.
-	  file=$progdir/$program
+	  file="$progdir/$program"
 	fi
 	;;
       esac
@@ -3932,15 +2614,7 @@ func_mode_execute ()
       func_append_quoted args "$file"
     done
 
-    if $opt_dry_run; then
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	echo "export $shlibpath_var"
-      fi
-      $ECHO "$cmd$args"
-      exit $EXIT_SUCCESS
-    else
+    if test "X$opt_dry_run" = Xfalse; then
       if test -n "$shlibpath_var"; then
 	# Export the shlibpath_var.
 	eval "export $shlibpath_var"
@@ -3957,18 +2631,25 @@ func_mode_execute ()
       done
 
       # Now prepare to actually exec the command.
-      exec_cmd=\$cmd$args
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
     fi
 }
 
-test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
-    $debug_cmd
-
+    $opt_debug
     libs=
     libdirs=
     admincmds=
@@ -3982,11 +2663,11 @@ func_mode_finish ()
 	if func_lalib_unsafe_p "$opt"; then
 	  func_append libs " $opt"
 	else
-	  func_warning "'$opt' is not a valid libtool archive"
+	  func_warning "\`$opt' is not a valid libtool archive"
 	fi
 
       else
-	func_fatal_error "invalid argument '$opt'"
+	func_fatal_error "invalid argument \`$opt'"
       fi
     done
 
@@ -4001,12 +2682,12 @@ func_mode_finish ()
       # Remove sysroot references
       if $opt_dry_run; then
         for lib in $libs; do
-          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
+          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
         done
       else
         tmpdir=`func_mktempdir`
         for lib in $libs; do
-	  $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
 	    > $tmpdir/tmp-la
 	  mv -f $tmpdir/tmp-la $lib
 	done
@@ -4031,7 +2712,7 @@ func_mode_finish ()
     fi
 
     # Exit here if they wanted silent mode.
-    $opt_quiet && exit $EXIT_SUCCESS
+    $opt_silent && exit $EXIT_SUCCESS
 
     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
       echo "----------------------------------------------------------------------"
@@ -4042,27 +2723,27 @@ func_mode_finish ()
       echo
       echo "If you ever happen to want to link against installed libraries"
       echo "in a given directory, LIBDIR, you must either use libtool, and"
-      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
+      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
       echo "flag during linking and do at least one of the following:"
       if test -n "$shlibpath_var"; then
-	echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
+	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
 	echo "     during execution"
       fi
       if test -n "$runpath_var"; then
-	echo "   - add LIBDIR to the '$runpath_var' environment variable"
+	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
 	echo "     during linking"
       fi
       if test -n "$hardcode_libdir_flag_spec"; then
 	libdir=LIBDIR
 	eval flag=\"$hardcode_libdir_flag_spec\"
 
-	$ECHO "   - use the '$flag' linker flag"
+	$ECHO "   - use the \`$flag' linker flag"
       fi
       if test -n "$admincmds"; then
 	$ECHO "   - have your system administrator run these commands:$admincmds"
       fi
       if test -f /etc/ld.so.conf; then
-	echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
+	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
       fi
       echo
 
@@ -4081,20 +2762,18 @@ func_mode_finish ()
     exit $EXIT_SUCCESS
 }
 
-test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
 
 
 # func_mode_install arg...
 func_mode_install ()
 {
-    $debug_cmd
-
+    $opt_debug
     # There may be an optional sh(1) argument at the beginning of
     # install_prog (especially on Windows NT).
-    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac
-    then
+       case $nonopt in *shtool*) :;; *) false;; esac; then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -4121,7 +2800,7 @@ func_mode_install ()
     opts=
     prev=
     install_type=
-    isdir=false
+    isdir=no
     stripme=
     no_mode=:
     for arg
@@ -4134,7 +2813,7 @@ func_mode_install ()
       fi
 
       case $arg in
-      -d) isdir=: ;;
+      -d) isdir=yes ;;
       -f)
 	if $install_cp; then :; else
 	  prev=$arg
@@ -4152,7 +2831,7 @@ func_mode_install ()
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
-	  if test X-m = "X$prev" && test -n "$install_override_mode"; then
+	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
 	    arg2=$install_override_mode
 	    no_mode=false
 	  fi
@@ -4177,7 +2856,7 @@ func_mode_install ()
       func_fatal_help "you must specify an install program"
 
     test -n "$prev" && \
-      func_fatal_help "the '$prev' option requires an argument"
+      func_fatal_help "the \`$prev' option requires an argument"
 
     if test -n "$install_override_mode" && $no_mode; then
       if $install_cp; then :; else
@@ -4199,19 +2878,19 @@ func_mode_install ()
     dest=$func_stripname_result
 
     # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=:
-    if $isdir; then
-      destdir=$dest
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
       destname=
     else
       func_dirname_and_basename "$dest" "" "."
-      destdir=$func_dirname_result
-      destname=$func_basename_result
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
 
       # Not a directory, so check to see that there is only one file specified.
       set dummy $files; shift
       test "$#" -gt 1 && \
-	func_fatal_help "'$dest' is not a directory"
+	func_fatal_help "\`$dest' is not a directory"
     fi
     case $destdir in
     [\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -4220,7 +2899,7 @@ func_mode_install ()
 	case $file in
 	*.lo) ;;
 	*)
-	  func_fatal_help "'$destdir' must be an absolute directory name"
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
 	  ;;
 	esac
       done
@@ -4229,7 +2908,7 @@ func_mode_install ()
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
-    libtool_install_magic=$magic
+    libtool_install_magic="$magic"
 
     staticlibs=
     future_libdirs=
@@ -4249,7 +2928,7 @@ func_mode_install ()
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "'$file' is not a valid libtool archive"
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
 
 	library_names=
 	old_library=
@@ -4271,7 +2950,7 @@ func_mode_install ()
 	fi
 
 	func_dirname "$file" "/" ""
-	dir=$func_dirname_result
+	dir="$func_dirname_result"
 	func_append dir "$objdir"
 
 	if test -n "$relink_command"; then
@@ -4285,7 +2964,7 @@ func_mode_install ()
 	  # are installed into $libdir/../bin (currently, that works fine)
 	  # but it's something to keep an eye on.
 	  test "$inst_prefix_dir" = "$destdir" && \
-	    func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
@@ -4294,36 +2973,29 @@ func_mode_install ()
 	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
 	  fi
 
-	  func_warning "relinking '$file'"
+	  func_warning "relinking \`$file'"
 	  func_show_eval "$relink_command" \
-	    'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
 	fi
 
 	# See the names of the shared library.
 	set dummy $library_names; shift
 	if test -n "$1"; then
-	  realname=$1
+	  realname="$1"
 	  shift
 
-	  srcname=$realname
-	  test -n "$relink_command" && srcname=${realname}T
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
 
 	  # Install the shared library and build the symlinks.
 	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
 	      'exit $?'
-	  tstripme=$stripme
+	  tstripme="$stripme"
 	  case $host_os in
 	  cygwin* | mingw* | pw32* | cegcc*)
 	    case $realname in
 	    *.dll.a)
-	      tstripme=
-	      ;;
-	    esac
-	    ;;
-	  os2*)
-	    case $realname in
-	    *_dll.a)
-	      tstripme=
+	      tstripme=""
 	      ;;
 	    esac
 	    ;;
@@ -4334,7 +3006,7 @@ func_mode_install ()
 
 	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
-	    # Try 'ln -sf' first, because the 'ln' binary might depend on
+	    # Try `ln -sf' first, because the `ln' binary might depend on
 	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
 	    # so we also need to try rm && ln -s.
 	    for linkname
@@ -4345,14 +3017,14 @@ func_mode_install ()
 	  fi
 
 	  # Do each command in the postinstall commands.
-	  lib=$destdir/$realname
+	  lib="$destdir/$realname"
 	  func_execute_cmds "$postinstall_cmds" 'exit $?'
 	fi
 
 	# Install the pseudo-library for information purposes.
 	func_basename "$file"
-	name=$func_basename_result
-	instname=$dir/${name}i
+	name="$func_basename_result"
+	instname="$dir/$name"i
 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
 	# Maybe install the static library, too.
@@ -4364,11 +3036,11 @@ func_mode_install ()
 
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
-	  destfile=$destdir/$destname
+	  destfile="$destdir/$destname"
 	else
 	  func_basename "$file"
-	  destfile=$func_basename_result
-	  destfile=$destdir/$destfile
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
 	fi
 
 	# Deduce the name of the destination old-style object file.
@@ -4378,11 +3050,11 @@ func_mode_install ()
 	  staticdest=$func_lo2o_result
 	  ;;
 	*.$objext)
-	  staticdest=$destfile
+	  staticdest="$destfile"
 	  destfile=
 	  ;;
 	*)
-	  func_fatal_help "cannot copy a libtool object to '$destfile'"
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
 	  ;;
 	esac
 
@@ -4391,7 +3063,7 @@ func_mode_install ()
 	  func_show_eval "$install_prog $file $destfile" 'exit $?'
 
 	# Install the old object if enabled.
-	if test yes = "$build_old_libs"; then
+	if test "$build_old_libs" = yes; then
 	  # Deduce the name of the old-style object file.
 	  func_lo2o "$file"
 	  staticobj=$func_lo2o_result
@@ -4403,23 +3075,23 @@ func_mode_install ()
       *)
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
-	  destfile=$destdir/$destname
+	  destfile="$destdir/$destname"
 	else
 	  func_basename "$file"
-	  destfile=$func_basename_result
-	  destfile=$destdir/$destfile
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
 	fi
 
 	# If the file is missing, and there is a .exe on the end, strip it
 	# because it is most likely a libtool script we actually want to
 	# install
-	stripped_ext=
+	stripped_ext=""
 	case $file in
 	  *.exe)
 	    if test ! -f "$file"; then
 	      func_stripname '' '.exe' "$file"
 	      file=$func_stripname_result
-	      stripped_ext=.exe
+	      stripped_ext=".exe"
 	    fi
 	    ;;
 	esac
@@ -4447,19 +3119,19 @@ func_mode_install ()
 
 	  # Check the variables that should have been set.
 	  test -z "$generated_by_libtool_version" && \
-	    func_fatal_error "invalid libtool wrapper script '$wrapper'"
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
 
-	  finalize=:
+	  finalize=yes
 	  for lib in $notinst_deplibs; do
 	    # Check to see that each library is installed.
 	    libdir=
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
-	    libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
 	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      func_warning "'$lib' has not been installed in '$libdir'"
-	      finalize=false
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
 	    fi
 	  done
 
@@ -4467,29 +3139,29 @@ func_mode_install ()
 	  func_source "$wrapper"
 
 	  outputname=
-	  if test no = "$fast_install" && test -n "$relink_command"; then
+	  if test "$fast_install" = no && test -n "$relink_command"; then
 	    $opt_dry_run || {
-	      if $finalize; then
+	      if test "$finalize" = yes; then
 	        tmpdir=`func_mktempdir`
 		func_basename "$file$stripped_ext"
-		file=$func_basename_result
-	        outputname=$tmpdir/$file
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
 	        # Replace the output file specification.
 	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
 
-	        $opt_quiet || {
+	        $opt_silent || {
 	          func_quote_for_expand "$relink_command"
 		  eval "func_echo $func_quote_for_expand_result"
 	        }
 	        if eval "$relink_command"; then :
 	          else
-		  func_error "error: relink '$file' with the above command before installing it"
+		  func_error "error: relink \`$file' with the above command before installing it"
 		  $opt_dry_run || ${RM}r "$tmpdir"
 		  continue
 	        fi
-	        file=$outputname
+	        file="$outputname"
 	      else
-	        func_warning "cannot relink '$file'"
+	        func_warning "cannot relink \`$file'"
 	      fi
 	    }
 	  else
@@ -4526,10 +3198,10 @@ func_mode_install ()
 
     for file in $staticlibs; do
       func_basename "$file"
-      name=$func_basename_result
+      name="$func_basename_result"
 
       # Set up the ranlib parameters.
-      oldlib=$destdir/$name
+      oldlib="$destdir/$name"
       func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
       tool_oldlib=$func_to_tool_file_result
 
@@ -4544,18 +3216,18 @@ func_mode_install ()
     done
 
     test -n "$future_libdirs" && \
-      func_warning "remember to run '$progname --finish$future_libdirs'"
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
 
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       $opt_dry_run && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
     else
       exit $EXIT_SUCCESS
     fi
 }
 
-test install = "$opt_mode" && func_mode_install ${1+"$@"}
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
 
 
 # func_generate_dlsyms outputname originator pic_p
@@ -4563,17 +3235,16 @@ test install = "$opt_mode" && func_mode_install ${1+"$@"}
 # a dlpreopen symbol table.
 func_generate_dlsyms ()
 {
-    $debug_cmd
-
-    my_outputname=$1
-    my_originator=$2
-    my_pic_p=${3-false}
-    my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
     my_dlsyms=
 
-    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
       if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	my_dlsyms=${my_outputname}S.c
+	my_dlsyms="${my_outputname}S.c"
       else
 	func_error "not configured to extract global symbols from dlpreopened files"
       fi
@@ -4584,7 +3255,7 @@ func_generate_dlsyms ()
       "") ;;
       *.c)
 	# Discover the nlist of each of the dlfiles.
-	nlist=$output_objdir/$my_outputname.nm
+	nlist="$output_objdir/${my_outputname}.nm"
 
 	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
 
@@ -4592,36 +3263,34 @@ func_generate_dlsyms ()
 	func_verbose "creating $output_objdir/$my_dlsyms"
 
 	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
 
 #ifdef __cplusplus
 extern \"C\" {
 #endif
 
-#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
 #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
 #endif
 
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
-/* DATA imports from DLLs on WIN32 can't be const, because runtime
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT_DLSYM_CONST
-#elif defined __osf__
+#elif defined(__osf__)
 /* This system does not cope well with relocations in const data.  */
 # define LT_DLSYM_CONST
 #else
 # define LT_DLSYM_CONST const
 #endif
 
-#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
-
 /* External symbol declarations for the compiler. */\
 "
 
-	if test yes = "$dlself"; then
-	  func_verbose "generating symbol list for '$output'"
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
 
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
@@ -4629,7 +3298,7 @@ extern \"C\" {
 	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
 	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
-	    func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
+	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
 	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
 	  done
 
@@ -4649,10 +3318,10 @@ extern \"C\" {
 
 	  # Prepare the list of exported symbols
 	  if test -z "$export_symbols"; then
-	    export_symbols=$output_objdir/$outputname.exp
+	    export_symbols="$output_objdir/$outputname.exp"
 	    $opt_dry_run || {
 	      $RM $export_symbols
-	      eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 	      case $host in
 	      *cygwin* | *mingw* | *cegcc* )
                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
@@ -4662,7 +3331,7 @@ extern \"C\" {
 	    }
 	  else
 	    $opt_dry_run || {
-	      eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
@@ -4676,22 +3345,22 @@ extern \"C\" {
 	fi
 
 	for dlprefile in $dlprefiles; do
-	  func_verbose "extracting global C symbols from '$dlprefile'"
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
 	  func_basename "$dlprefile"
-	  name=$func_basename_result
+	  name="$func_basename_result"
           case $host in
 	    *cygwin* | *mingw* | *cegcc* )
 	      # if an import library, we need to obtain dlname
 	      if func_win32_import_lib_p "$dlprefile"; then
 	        func_tr_sh "$dlprefile"
 	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
-	        dlprefile_dlbasename=
+	        dlprefile_dlbasename=""
 	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
 	          # Use subshell, to avoid clobbering current variable values
 	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
-	          if test -n "$dlprefile_dlname"; then
+	          if test -n "$dlprefile_dlname" ; then
 	            func_basename "$dlprefile_dlname"
-	            dlprefile_dlbasename=$func_basename_result
+	            dlprefile_dlbasename="$func_basename_result"
 	          else
 	            # no lafile. user explicitly requested -dlpreopen <import library>.
 	            $sharedlib_from_linklib_cmd "$dlprefile"
@@ -4699,7 +3368,7 @@ extern \"C\" {
 	          fi
 	        fi
 	        $opt_dry_run || {
-	          if test -n "$dlprefile_dlbasename"; then
+	          if test -n "$dlprefile_dlbasename" ; then
 	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
 	          else
 	            func_warning "Could not compute DLL name from $name"
@@ -4755,11 +3424,6 @@ extern \"C\" {
 	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
-	  func_show_eval '$RM "${nlist}I"'
-	  if test -n "$global_symbol_to_import"; then
-	    eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
-	  fi
-
 	  echo >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
@@ -4768,30 +3432,11 @@ typedef struct {
   void *address;
 } lt_dlsymlist;
 extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];\
-"
-
-	  if test -s "$nlist"I; then
-	    echo >> "$output_objdir/$my_dlsyms" "\
-static void lt_syminit(void)
-{
-  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
-  for (; symbol->name; ++symbol)
-    {"
-	    $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
-	    echo >> "$output_objdir/$my_dlsyms" "\
-    }
-}"
-	  fi
-	  echo >> "$output_objdir/$my_dlsyms" "\
+lt_${my_prefix}_LTX_preloaded_symbols[];
 LT_DLSYM_CONST lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[] =
-{ {\"$my_originator\", (void *) 0},"
-
-	  if test -s "$nlist"I; then
-	    echo >> "$output_objdir/$my_dlsyms" "\
-  {\"@INIT@\", (void *) &lt_syminit},"
-	  fi
+{\
+  { \"$my_originator\", (void *) 0 },"
 
 	  case $need_lib_prefix in
 	  no)
@@ -4833,7 +3478,9 @@ static const void *lt_preloaded_setup() {
 	  *-*-hpux*)
 	    pic_flag_for_symtable=" $pic_flag"  ;;
 	  *)
-	    $my_pic_p && pic_flag_for_symtable=" $pic_flag"
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
 	    ;;
 	  esac
 	  ;;
@@ -4850,10 +3497,10 @@ static const void *lt_preloaded_setup() {
 	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
 
 	# Clean up the generated files.
-	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
 
 	# Transform the symbol file into the correct name.
-	symfileobj=$output_objdir/${my_outputname}S.$objext
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
@@ -4871,7 +3518,7 @@ static const void *lt_preloaded_setup() {
 	esac
 	;;
       *)
-	func_fatal_error "unknown suffix for '$my_dlsyms'"
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
 	;;
       esac
     else
@@ -4885,32 +3532,6 @@ static const void *lt_preloaded_setup() {
     fi
 }
 
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
-  $debug_cmd
-
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
-  test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
-  $debug_cmd
-
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
-  test -n "$func_cygming_ms_implib_tmp"
-}
-
 # func_win32_libid arg
 # return the library type of file 'arg'
 #
@@ -4920,9 +3541,8 @@ func_cygming_ms_implib_p ()
 # Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
-  $debug_cmd
-
-  win32_libid_type=unknown
+  $opt_debug
+  win32_libid_type="unknown"
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
   *ar\ archive\ import\ library*) # definitely import
@@ -4932,29 +3552,16 @@ func_win32_libid ()
     # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
        $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-      case $nm_interface in
-      "MS dumpbin")
-	if func_cygming_ms_implib_p "$1" ||
-	   func_cygming_gnu_implib_p "$1"
-	then
-	  win32_nmres=import
-	else
-	  win32_nmres=
-	fi
-	;;
-      *)
-	func_to_tool_file "$1" func_convert_file_msys_to_w32
-	win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
-	  $SED -n -e '
+      func_to_tool_file "$1" func_convert_file_msys_to_w32
+      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	$SED -n -e '
 	    1,100{
 		/ I /{
-		    s|.*|import|
+		    s,.*,import,
 		    p
 		    q
 		}
 	    }'`
-	;;
-      esac
       case $win32_nmres in
       import*)  win32_libid_type="x86 archive import";;
       *)        win32_libid_type="x86 archive static";;
@@ -4986,8 +3593,7 @@ func_win32_libid ()
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib ()
 {
-  $debug_cmd
-
+  $opt_debug
   sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
 }
 
@@ -5004,8 +3610,7 @@ func_cygming_dll_for_implib ()
 # specified import library.
 func_cygming_dll_for_implib_fallback_core ()
 {
-  $debug_cmd
-
+  $opt_debug
   match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
   $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
     $SED '/^Contents of section '"$match_literal"':/{
@@ -5041,8 +3646,8 @@ func_cygming_dll_for_implib_fallback_core ()
       /./p' |
     # we now have a list, one entry per line, of the stringified
     # contents of the appropriate section of all members of the
-    # archive that possess that section. Heuristic: eliminate
-    # all those that have a first or second character that is
+    # archive which possess that section. Heuristic: eliminate
+    # all those which have a first or second character that is
     # a '.' (that is, objdump's representation of an unprintable
     # character.) This should work for all archives with less than
     # 0x302f exports -- but will fail for DLLs whose name actually
@@ -5053,6 +3658,30 @@ func_cygming_dll_for_implib_fallback_core ()
     $SED -e '/^\./d;/^.\./d;q'
 }
 
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
 # func_cygming_dll_for_implib_fallback ARG
 # Platform-specific function to extract the
 # name of the DLL associated with the specified
@@ -5066,17 +3695,16 @@ func_cygming_dll_for_implib_fallback_core ()
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib_fallback ()
 {
-  $debug_cmd
-
-  if func_cygming_gnu_implib_p "$1"; then
+  $opt_debug
+  if func_cygming_gnu_implib_p "$1" ; then
     # binutils import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
-  elif func_cygming_ms_implib_p "$1"; then
+  elif func_cygming_ms_implib_p "$1" ; then
     # ms-generated import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
   else
     # unknown
-    sharedlib_from_linklib_result=
+    sharedlib_from_linklib_result=""
   fi
 }
 
@@ -5084,11 +3712,10 @@ func_cygming_dll_for_implib_fallback ()
 # func_extract_an_archive dir oldlib
 func_extract_an_archive ()
 {
-    $debug_cmd
-
-    f_ex_an_ar_dir=$1; shift
-    f_ex_an_ar_oldlib=$1
-    if test yes = "$lock_old_archive_extraction"; then
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    if test "$lock_old_archive_extraction" = yes; then
       lockfile=$f_ex_an_ar_oldlib.lock
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"
@@ -5097,7 +3724,7 @@ func_extract_an_archive ()
     fi
     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
 		   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test yes = "$lock_old_archive_extraction"; then
+    if test "$lock_old_archive_extraction" = yes; then
       $opt_dry_run || rm -f "$lockfile"
     fi
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
@@ -5111,23 +3738,22 @@ func_extract_an_archive ()
 # func_extract_archives gentop oldlib ...
 func_extract_archives ()
 {
-    $debug_cmd
-
-    my_gentop=$1; shift
+    $opt_debug
+    my_gentop="$1"; shift
     my_oldlibs=${1+"$@"}
-    my_oldobjs=
-    my_xlib=
-    my_xabs=
-    my_xdir=
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
 
     for my_xlib in $my_oldlibs; do
       # Extract the objects.
       case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
 	*) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       func_basename "$my_xlib"
-      my_xlib=$func_basename_result
+      my_xlib="$func_basename_result"
       my_xlib_u=$my_xlib
       while :; do
         case " $extracted_archives " in
@@ -5139,7 +3765,7 @@ func_extract_archives ()
 	esac
       done
       extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir=$my_gentop/$my_xlib_u
+      my_xdir="$my_gentop/$my_xlib_u"
 
       func_mkdir_p "$my_xdir"
 
@@ -5152,23 +3778,22 @@ func_extract_archives ()
 	  cd $my_xdir || exit $?
 	  darwin_archive=$my_xabs
 	  darwin_curdir=`pwd`
-	  func_basename "$darwin_archive"
-	  darwin_base_archive=$func_basename_result
+	  darwin_base_archive=`basename "$darwin_archive"`
 	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
 	  if test -n "$darwin_arches"; then
 	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
 	    darwin_arch=
 	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches; do
-	      func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
-	      $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
-	      cd "unfat-$$/$darwin_base_archive-$darwin_arch"
-	      func_extract_an_archive "`pwd`" "$darwin_base_archive"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
 	      cd "$darwin_curdir"
-	      $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
 	    done # $darwin_arches
             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
@@ -5190,7 +3815,7 @@ func_extract_archives ()
       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
     done
 
-    func_extract_archives_result=$my_oldobjs
+    func_extract_archives_result="$my_oldobjs"
 }
 
 
@@ -5205,7 +3830,7 @@ func_extract_archives ()
 #
 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
 # variable will take.  If 'yes', then the emitted script
-# will assume that the directory where it is stored is
+# will assume that the directory in which it is stored is
 # the $objdir directory.  This is a cygwin/mingw-specific
 # behavior.
 func_emit_wrapper ()
@@ -5216,7 +3841,7 @@ func_emit_wrapper ()
 #! $SHELL
 
 # $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # The $output program cannot be directly executed until all the libtool
 # libraries that it depends on are installed.
@@ -5273,9 +3898,9 @@ _LTECHO_EOF'
 
 # Very basic option parsing. These options are (a) specific to
 # the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ that is used only on
+# /script/ and the wrapper /executable/ which is used only on
 # windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options that match
+# (application programs are unlikely to have options which match
 # this pattern).
 #
 # There are only two supported options: --lt-debug and
@@ -5308,7 +3933,7 @@ func_parse_lt_options ()
 
   # Print the debug banner immediately:
   if test -n \"\$lt_option_debug\"; then
-    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
   fi
 }
 
@@ -5319,7 +3944,7 @@ func_lt_dump_args ()
   lt_dump_args_N=1;
   for lt_arg
   do
-    \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
     lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
   done
 }
@@ -5333,7 +3958,7 @@ func_exec_program_core ()
   *-*-mingw | *-*-os2* | *-cegcc*)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
@@ -5343,7 +3968,7 @@ func_exec_program_core ()
   *)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir/\$program\" \${1+\"\$@\"}
@@ -5418,13 +4043,13 @@ func_exec_program ()
   test -n \"\$absdir\" && thisdir=\"\$absdir\"
 "
 
-	if test yes = "$fast_install"; then
+	if test "$fast_install" = yes; then
 	  $ECHO "\
   program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
 
   if test ! -f \"\$progdir/\$program\" ||
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
     file=\"\$\$-\$program\"
@@ -5441,7 +4066,7 @@ func_exec_program ()
     if test -n \"\$relink_command\"; then
       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
       else
-	\$ECHO \"\$relink_command_output\" >&2
+	$ECHO \"\$relink_command_output\" >&2
 	$RM \"\$progdir/\$file\"
 	exit 1
       fi
@@ -5476,7 +4101,7 @@ func_exec_program ()
 	fi
 
 	# Export our shlibpath_var if we have one.
-	if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 	  $ECHO "\
     # Add our own library path to $shlibpath_var
     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
@@ -5496,7 +4121,7 @@ func_exec_program ()
     fi
   else
     # The program doesn't exist.
-    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
     \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
@@ -5515,7 +4140,7 @@ func_emit_cwrapperexe_src ()
 	cat <<EOF
 
 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
    The $output program cannot be directly executed until all the libtool
    libraries that it depends on are installed.
@@ -5550,45 +4175,47 @@ EOF
 #include <fcntl.h>
 #include <sys/stat.h>
 
-#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
-
 /* declarations of non-ANSI functions */
-#if defined __MINGW32__
+#if defined(__MINGW32__)
 # ifdef __STRICT_ANSI__
 int _putenv (const char *);
 # endif
-#elif defined __CYGWIN__
+#elif defined(__CYGWIN__)
 # ifdef __STRICT_ANSI__
 char *realpath (const char *, char *);
 int putenv (char *);
 int setenv (const char *, const char *, int);
 # endif
-/* #elif defined other_platform || defined ... */
+/* #elif defined (other platforms) ... */
 #endif
 
 /* portability defines, excluding path handling macros */
-#if defined _MSC_VER
+#if defined(_MSC_VER)
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
 # define S_IXUSR _S_IEXEC
-#elif defined __MINGW32__
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
-#elif defined __CYGWIN__
+#elif defined(__CYGWIN__)
 # define HAVE_SETENV
 # define FOPEN_WB "wb"
-/* #elif defined other platforms ... */
+/* #elif defined (other platforms) ... */
 #endif
 
-#if defined PATH_MAX
+#if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
-#elif defined MAXPATHLEN
+#elif defined(MAXPATHLEN)
 # define LT_PATHMAX MAXPATHLEN
 #else
 # define LT_PATHMAX 1024
@@ -5607,8 +4234,8 @@ int setenv (const char *, const char *, int);
 # define PATH_SEPARATOR ':'
 #endif
 
-#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
-  defined __OS2__
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
 # define HAVE_DOS_BASED_FILE_SYSTEM
 # define FOPEN_WB "wb"
 # ifndef DIR_SEPARATOR_2
@@ -5641,10 +4268,10 @@ int setenv (const char *, const char *, int);
 
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
-  if (stale) { free (stale); stale = 0; } \
+  if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
-#if defined LT_DEBUGWRAPPER
+#if defined(LT_DEBUGWRAPPER)
 static int lt_debug = 1;
 #else
 static int lt_debug = 0;
@@ -5673,16 +4300,11 @@ void lt_dump_script (FILE *f);
 EOF
 
 	    cat <<EOF
-#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
-# define externally_visible volatile
-#else
-# define externally_visible __attribute__((externally_visible)) volatile
-#endif
-externally_visible const char * MAGIC_EXE = "$magic_exe";
+volatile const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
-	    if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
               func_to_host_path "$temp_rpath"
 	      cat <<EOF
 const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
@@ -5706,7 +4328,7 @@ const char * EXE_PATH_VALUE   = "";
 EOF
 	    fi
 
-	    if test yes = "$fast_install"; then
+	    if test "$fast_install" = yes; then
 	      cat <<EOF
 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
 EOF
@@ -5735,12 +4357,12 @@ main (int argc, char *argv[])
   char *actual_cwrapper_name;
   char *target_name;
   char *lt_argv_zero;
-  int rval = 127;
+  intptr_t rval = 127;
 
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  newargz = XMALLOC (char *, (size_t) argc + 1);
+  newargz = XMALLOC (char *, argc + 1);
 
   /* very simple arg parsing; don't want to rely on getopt
    * also, copy all non cwrapper options to newargz, except
@@ -5749,10 +4371,10 @@ main (int argc, char *argv[])
   newargc=0;
   for (i = 1; i < argc; i++)
     {
-      if (STREQ (argv[i], dumpscript_opt))
+      if (strcmp (argv[i], dumpscript_opt) == 0)
 	{
 EOF
-	    case $host in
+	    case "$host" in
 	      *mingw* | *cygwin* )
 		# make stdout use "unix" line endings
 		echo "          setmode(1,_O_BINARY);"
@@ -5763,12 +4385,12 @@ EOF
 	  lt_dump_script (stdout);
 	  return 0;
 	}
-      if (STREQ (argv[i], debug_opt))
+      if (strcmp (argv[i], debug_opt) == 0)
 	{
           lt_debug = 1;
           continue;
 	}
-      if (STREQ (argv[i], ltwrapper_option_prefix))
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
         {
           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
              namespace, but it is not one of the ones we know about and
@@ -5791,7 +4413,7 @@ EOF
 EOF
 	    cat <<EOF
   /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
 EOF
 	    cat <<"EOF"
   lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
@@ -5902,7 +4524,7 @@ EOF
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
   newargz = prepare_spawn (newargz);
-  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
@@ -5947,7 +4569,7 @@ base_name (const char *name)
 {
   const char *base;
 
-#if defined HAVE_DOS_BASED_FILE_SYSTEM
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   /* Skip over the disk name in MSDOS pathnames. */
   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
     name += 2;
@@ -6006,7 +4628,7 @@ find_executable (const char *wrapper)
   const char *p_next;
   /* static buffer for getcwd */
   char tmp[LT_PATHMAX + 1];
-  size_t tmp_len;
+  int tmp_len;
   char *concat_name;
 
   lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
@@ -6016,7 +4638,7 @@ find_executable (const char *wrapper)
     return NULL;
 
   /* Absolute path? */
-#if defined HAVE_DOS_BASED_FILE_SYSTEM
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
     {
       concat_name = xstrdup (wrapper);
@@ -6034,7 +4656,7 @@ find_executable (const char *wrapper)
 	    return concat_name;
 	  XFREE (concat_name);
 	}
-#if defined HAVE_DOS_BASED_FILE_SYSTEM
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
     }
 #endif
 
@@ -6057,7 +4679,7 @@ find_executable (const char *wrapper)
 	      for (q = p; *q; q++)
 		if (IS_PATH_SEPARATOR (*q))
 		  break;
-	      p_len = (size_t) (q - p);
+	      p_len = q - p;
 	      p_next = (*q == '\0' ? q : q + 1);
 	      if (p_len == 0)
 		{
@@ -6176,7 +4798,7 @@ strendzap (char *str, const char *pat)
   if (patlen <= len)
     {
       str += len - patlen;
-      if (STREQ (str, pat))
+      if (strcmp (str, pat) == 0)
 	*str = '\0';
     }
   return str;
@@ -6241,7 +4863,7 @@ lt_setenv (const char *name, const char *value)
     char *str = xstrdup (value);
     setenv (name, str, 1);
 #else
-    size_t len = strlen (name) + 1 + strlen (value) + 1;
+    int len = strlen (name) + 1 + strlen (value) + 1;
     char *str = XMALLOC (char, len);
     sprintf (str, "%s=%s", name, value);
     if (putenv (str) != EXIT_SUCCESS)
@@ -6258,8 +4880,8 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
   char *new_value;
   if (orig_value && *orig_value)
     {
-      size_t orig_value_len = strlen (orig_value);
-      size_t add_len = strlen (add);
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
       new_value = XMALLOC (char, add_len + orig_value_len + 1);
       if (to_end)
         {
@@ -6290,10 +4912,10 @@ lt_update_exe_path (const char *name, const char *value)
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       /* some systems can't cope with a ':'-terminated path #' */
-      size_t len = strlen (new_value);
-      while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
         {
-          new_value[--len] = '\0';
+          new_value[len-1] = '\0';
         }
       lt_setenv (name, new_value);
       XFREE (new_value);
@@ -6460,47 +5082,27 @@ EOF
 # True if ARG is an import lib, as indicated by $file_magic_cmd
 func_win32_import_lib_p ()
 {
-    $debug_cmd
-
+    $opt_debug
     case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
     *import*) : ;;
     *) false ;;
     esac
 }
 
-# func_suncc_cstd_abi
-# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
-# Several compiler flags select an ABI that is incompatible with the
-# Cstd library. Avoid specifying it if any are in CXXFLAGS.
-func_suncc_cstd_abi ()
-{
-    $debug_cmd
-
-    case " $compile_command " in
-    *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
-      suncc_use_cstd_abi=no
-      ;;
-    *)
-      suncc_use_cstd_abi=yes
-      ;;
-    esac
-}
-
 # func_mode_link arg...
 func_mode_link ()
 {
-    $debug_cmd
-
+    $opt_debug
     case $host in
     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
-      # what system we are compiling for in order to pass an extra
+      # which system we are compiling for in order to pass an extra
       # flag for every libtool invocation.
       # allow_undefined=no
 
       # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll that has undefined symbols, in which case not
+      # to make a dll which has undefined symbols, in which case not
       # even a static library is built.  For now, we need to specify
       # -no-undefined on the libtool link line when we can be certain
       # that all symbols are satisfied, otherwise we get a static library.
@@ -6544,11 +5146,10 @@ func_mode_link ()
     module=no
     no_install=no
     objs=
-    os2dllname=
     non_pic_objects=
     precious_files_regex=
     prefer_static_libs=no
-    preload=false
+    preload=no
     prev=
     prevarg=
     release=
@@ -6560,7 +5161,7 @@ func_mode_link ()
     vinfo=
     vinfo_number=no
     weak_libs=
-    single_module=$wl-single_module
+    single_module="${wl}-single_module"
     func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
@@ -6568,15 +5169,15 @@ func_mode_link ()
     do
       case $arg in
       -shared)
-	test yes != "$build_libtool_libs" \
-	  && func_fatal_configuration "cannot build a shared library"
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
 	build_old_libs=no
 	break
 	;;
       -all-static | -static | -static-libtool-libs)
 	case $arg in
 	-all-static)
-	  if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
 	    func_warning "complete static linking is impossible in this configuration"
 	  fi
 	  if test -n "$link_static_flag"; then
@@ -6609,7 +5210,7 @@ func_mode_link ()
 
     # Go through the arguments, transforming them on the way.
     while test "$#" -gt 0; do
-      arg=$1
+      arg="$1"
       shift
       func_quote_for_eval "$arg"
       qarg=$func_quote_for_eval_unquoted_result
@@ -6626,21 +5227,21 @@ func_mode_link ()
 
 	case $prev in
 	bindir)
-	  bindir=$arg
+	  bindir="$arg"
 	  prev=
 	  continue
 	  ;;
 	dlfiles|dlprefiles)
-	  $preload || {
+	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
 	    func_append compile_command " @SYMFILE@"
 	    func_append finalize_command " @SYMFILE@"
-	    preload=:
-	  }
+	    preload=yes
+	  fi
 	  case $arg in
 	  *.la | *.lo) ;;  # We handle these cases below.
 	  force)
-	    if test no = "$dlself"; then
+	    if test "$dlself" = no; then
 	      dlself=needless
 	      export_dynamic=yes
 	    fi
@@ -6648,9 +5249,9 @@ func_mode_link ()
 	    continue
 	    ;;
 	  self)
-	    if test dlprefiles = "$prev"; then
+	    if test "$prev" = dlprefiles; then
 	      dlself=yes
-	    elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
 	      dlself=yes
 	    else
 	      dlself=needless
@@ -6660,7 +5261,7 @@ func_mode_link ()
 	    continue
 	    ;;
 	  *)
-	    if test dlfiles = "$prev"; then
+	    if test "$prev" = dlfiles; then
 	      func_append dlfiles " $arg"
 	    else
 	      func_append dlprefiles " $arg"
@@ -6671,14 +5272,14 @@ func_mode_link ()
 	  esac
 	  ;;
 	expsyms)
-	  export_symbols=$arg
+	  export_symbols="$arg"
 	  test -f "$arg" \
-	    || func_fatal_error "symbol file '$arg' does not exist"
+	    || func_fatal_error "symbol file \`$arg' does not exist"
 	  prev=
 	  continue
 	  ;;
 	expsyms_regex)
-	  export_symbols_regex=$arg
+	  export_symbols_regex="$arg"
 	  prev=
 	  continue
 	  ;;
@@ -6696,13 +5297,7 @@ func_mode_link ()
 	  continue
 	  ;;
 	inst_prefix)
-	  inst_prefix_dir=$arg
-	  prev=
-	  continue
-	  ;;
-	mllvm)
-	  # Clang does not use LLVM to link, so we can simply discard any
-	  # '-mllvm $arg' options when doing the link step.
+	  inst_prefix_dir="$arg"
 	  prev=
 	  continue
 	  ;;
@@ -6726,21 +5321,21 @@ func_mode_link ()
 
 		if test -z "$pic_object" ||
 		   test -z "$non_pic_object" ||
-		   test none = "$pic_object" &&
-		   test none = "$non_pic_object"; then
-		  func_fatal_error "cannot find name of object for '$arg'"
+		   test "$pic_object" = none &&
+		   test "$non_pic_object" = none; then
+		  func_fatal_error "cannot find name of object for \`$arg'"
 		fi
 
 		# Extract subdirectory from the argument.
 		func_dirname "$arg" "/" ""
-		xdir=$func_dirname_result
+		xdir="$func_dirname_result"
 
-		if test none != "$pic_object"; then
+		if test "$pic_object" != none; then
 		  # Prepend the subdirectory the object is found in.
-		  pic_object=$xdir$pic_object
+		  pic_object="$xdir$pic_object"
 
-		  if test dlfiles = "$prev"; then
-		    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
 		      func_append dlfiles " $pic_object"
 		      prev=
 		      continue
@@ -6751,7 +5346,7 @@ func_mode_link ()
 		  fi
 
 		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test dlprefiles = "$prev"; then
+		  if test "$prev" = dlprefiles; then
 		    # Preload the old-style object.
 		    func_append dlprefiles " $pic_object"
 		    prev=
@@ -6759,23 +5354,23 @@ func_mode_link ()
 
 		  # A PIC object.
 		  func_append libobjs " $pic_object"
-		  arg=$pic_object
+		  arg="$pic_object"
 		fi
 
 		# Non-PIC object.
-		if test none != "$non_pic_object"; then
+		if test "$non_pic_object" != none; then
 		  # Prepend the subdirectory the object is found in.
-		  non_pic_object=$xdir$non_pic_object
+		  non_pic_object="$xdir$non_pic_object"
 
 		  # A standard non-PIC object
 		  func_append non_pic_objects " $non_pic_object"
-		  if test -z "$pic_object" || test none = "$pic_object"; then
-		    arg=$non_pic_object
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
 		  fi
 		else
 		  # If the PIC object exists, use it instead.
 		  # $xdir was prepended to $pic_object above.
-		  non_pic_object=$pic_object
+		  non_pic_object="$pic_object"
 		  func_append non_pic_objects " $non_pic_object"
 		fi
 	      else
@@ -6783,7 +5378,7 @@ func_mode_link ()
 		if $opt_dry_run; then
 		  # Extract subdirectory from the argument.
 		  func_dirname "$arg" "/" ""
-		  xdir=$func_dirname_result
+		  xdir="$func_dirname_result"
 
 		  func_lo2o "$arg"
 		  pic_object=$xdir$objdir/$func_lo2o_result
@@ -6791,29 +5386,24 @@ func_mode_link ()
 		  func_append libobjs " $pic_object"
 		  func_append non_pic_objects " $non_pic_object"
 	        else
-		  func_fatal_error "'$arg' is not a valid libtool object"
+		  func_fatal_error "\`$arg' is not a valid libtool object"
 		fi
 	      fi
 	    done
 	  else
-	    func_fatal_error "link input file '$arg' does not exist"
+	    func_fatal_error "link input file \`$arg' does not exist"
 	  fi
 	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;
-	os2dllname)
-	  os2dllname=$arg
-	  prev=
-	  continue
-	  ;;
 	precious_regex)
-	  precious_files_regex=$arg
+	  precious_files_regex="$arg"
 	  prev=
 	  continue
 	  ;;
 	release)
-	  release=-$arg
+	  release="-$arg"
 	  prev=
 	  continue
 	  ;;
@@ -6825,7 +5415,7 @@ func_mode_link ()
 	    func_fatal_error "only absolute run-paths are allowed"
 	    ;;
 	  esac
-	  if test rpath = "$prev"; then
+	  if test "$prev" = rpath; then
 	    case "$rpath " in
 	    *" $arg "*) ;;
 	    *) func_append rpath " $arg" ;;
@@ -6840,7 +5430,7 @@ func_mode_link ()
 	  continue
 	  ;;
 	shrext)
-	  shrext_cmds=$arg
+	  shrext_cmds="$arg"
 	  prev=
 	  continue
 	  ;;
@@ -6880,7 +5470,7 @@ func_mode_link ()
 	esac
       fi # test -n "$prev"
 
-      prevarg=$arg
+      prevarg="$arg"
 
       case $arg in
       -all-static)
@@ -6894,7 +5484,7 @@ func_mode_link ()
 
       -allow-undefined)
 	# FIXME: remove this flag sometime in the future.
-	func_fatal_error "'-allow-undefined' must not be used because it is the default"
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
 	;;
 
       -avoid-version)
@@ -6926,7 +5516,7 @@ func_mode_link ()
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
 	  func_fatal_error "more than one -exported-symbols argument is not allowed"
 	fi
-	if test X-export-symbols = "X$arg"; then
+	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
 	else
 	  prev=expsyms_regex
@@ -6960,9 +5550,9 @@ func_mode_link ()
 	func_stripname "-L" '' "$arg"
 	if test -z "$func_stripname_result"; then
 	  if test "$#" -gt 0; then
-	    func_fatal_error "require no space between '-L' and '$1'"
+	    func_fatal_error "require no space between \`-L' and \`$1'"
 	  else
-	    func_fatal_error "need path for '-L' option"
+	    func_fatal_error "need path for \`-L' option"
 	  fi
 	fi
 	func_resolve_sysroot "$func_stripname_result"
@@ -6973,8 +5563,8 @@ func_mode_link ()
 	*)
 	  absdir=`cd "$dir" && pwd`
 	  test -z "$absdir" && \
-	    func_fatal_error "cannot determine absolute directory name of '$dir'"
-	  dir=$absdir
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
+	  dir="$absdir"
 	  ;;
 	esac
 	case "$deplibs " in
@@ -7009,7 +5599,7 @@ func_mode_link ()
 	;;
 
       -l*)
-	if test X-lc = "X$arg" || test X-lm = "X$arg"; then
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # These systems don't actually have a C or math library (as such)
@@ -7017,11 +5607,11 @@ func_mode_link ()
 	    ;;
 	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
-	    test X-lc = "X$arg" && continue
+	    test "X$arg" = "X-lc" && continue
 	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
-	    test X-lc = "X$arg" && continue
+	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework
@@ -7030,16 +5620,16 @@ func_mode_link ()
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
 	    # Causes problems with __ctype
-	    test X-lc = "X$arg" && continue
+	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
-	    test X-lc = "X$arg" && continue
+	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  esac
-	elif test X-lc_r = "X$arg"; then
+	elif test "X$arg" = "X-lc_r"; then
 	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	   # Do not include libc_r directly, use -pthread flag.
 	   continue
 	   ;;
@@ -7049,11 +5639,6 @@ func_mode_link ()
 	continue
 	;;
 
-      -mllvm)
-	prev=mllvm
-	continue
-	;;
-
       -module)
 	module=yes
 	continue
@@ -7083,7 +5668,7 @@ func_mode_link ()
 	;;
 
       -multi_module)
-	single_module=$wl-multi_module
+	single_module="${wl}-multi_module"
 	continue
 	;;
 
@@ -7097,8 +5682,8 @@ func_mode_link ()
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
 	  # and Darwin in order for the loader to find any dlls it needs.
-	  func_warning "'-no-install' is ignored for $host"
-	  func_warning "assuming '-no-fast-install' instead"
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
@@ -7116,11 +5701,6 @@ func_mode_link ()
 	continue
 	;;
 
-      -os2dllname)
-	prev=os2dllname
-	continue
-	;;
-
       -o) prev=output ;;
 
       -precious-files-regex)
@@ -7208,14 +5788,14 @@ func_mode_link ()
 	func_stripname '-Wc,' '' "$arg"
 	args=$func_stripname_result
 	arg=
-	save_ifs=$IFS; IFS=,
+	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
-	  IFS=$save_ifs
+	  IFS="$save_ifs"
           func_quote_for_eval "$flag"
 	  func_append arg " $func_quote_for_eval_result"
 	  func_append compiler_flags " $func_quote_for_eval_result"
 	done
-	IFS=$save_ifs
+	IFS="$save_ifs"
 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result
 	;;
@@ -7224,15 +5804,15 @@ func_mode_link ()
 	func_stripname '-Wl,' '' "$arg"
 	args=$func_stripname_result
 	arg=
-	save_ifs=$IFS; IFS=,
+	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
-	  IFS=$save_ifs
+	  IFS="$save_ifs"
           func_quote_for_eval "$flag"
 	  func_append arg " $wl$func_quote_for_eval_result"
 	  func_append compiler_flags " $wl$func_quote_for_eval_result"
 	  func_append linker_flags " $func_quote_for_eval_result"
 	done
-	IFS=$save_ifs
+	IFS="$save_ifs"
 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result
 	;;
@@ -7255,7 +5835,7 @@ func_mode_link ()
       # -msg_* for osf cc
       -msg_*)
 	func_quote_for_eval "$arg"
-	arg=$func_quote_for_eval_result
+	arg="$func_quote_for_eval_result"
 	;;
 
       # Flags to be passed through unchanged, with rationale:
@@ -7267,46 +5847,25 @@ func_mode_link ()
       # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
       # -F/path              path to uninstalled frameworks, gcc on darwin
       # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
-      # -fstack-protector*   stack protector flags for GCC
       # @file                GCC response files
       # -tp=*                Portland pgcc target processor selection
       # --sysroot=*          for sysroot support
-      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
-      # -stdlib=*            select c++ std lib with clang
+      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
-      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
+      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
         func_quote_for_eval "$arg"
-	arg=$func_quote_for_eval_result
+	arg="$func_quote_for_eval_result"
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
         func_append compiler_flags " $arg"
         continue
         ;;
 
-      -Z*)
-        if test os2 = "`expr $host : '.*\(os2\)'`"; then
-          # OS/2 uses -Zxxx to specify OS/2-specific options
-	  compiler_flags="$compiler_flags $arg"
-	  func_append compile_command " $arg"
-	  func_append finalize_command " $arg"
-	  case $arg in
-	  -Zlinker | -Zstack)
-	    prev=xcompiler
-	    ;;
-	  esac
-	  continue
-        else
-	  # Otherwise treat like 'Some other compiler flag' below
-	  func_quote_for_eval "$arg"
-	  arg=$func_quote_for_eval_result
-        fi
-	;;
-
       # Some other compiler flag.
       -* | +*)
         func_quote_for_eval "$arg"
-	arg=$func_quote_for_eval_result
+	arg="$func_quote_for_eval_result"
 	;;
 
       *.$objext)
@@ -7327,21 +5886,21 @@ func_mode_link ()
 
 	  if test -z "$pic_object" ||
 	     test -z "$non_pic_object" ||
-	     test none = "$pic_object" &&
-	     test none = "$non_pic_object"; then
-	    func_fatal_error "cannot find name of object for '$arg'"
+	     test "$pic_object" = none &&
+	     test "$non_pic_object" = none; then
+	    func_fatal_error "cannot find name of object for \`$arg'"
 	  fi
 
 	  # Extract subdirectory from the argument.
 	  func_dirname "$arg" "/" ""
-	  xdir=$func_dirname_result
+	  xdir="$func_dirname_result"
 
-	  test none = "$pic_object" || {
+	  if test "$pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
-	    pic_object=$xdir$pic_object
+	    pic_object="$xdir$pic_object"
 
-	    if test dlfiles = "$prev"; then
-	      if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
 		func_append dlfiles " $pic_object"
 		prev=
 		continue
@@ -7352,7 +5911,7 @@ func_mode_link ()
 	    fi
 
 	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test dlprefiles = "$prev"; then
+	    if test "$prev" = dlprefiles; then
 	      # Preload the old-style object.
 	      func_append dlprefiles " $pic_object"
 	      prev=
@@ -7360,23 +5919,23 @@ func_mode_link ()
 
 	    # A PIC object.
 	    func_append libobjs " $pic_object"
-	    arg=$pic_object
-	  }
+	    arg="$pic_object"
+	  fi
 
 	  # Non-PIC object.
-	  if test none != "$non_pic_object"; then
+	  if test "$non_pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
-	    non_pic_object=$xdir$non_pic_object
+	    non_pic_object="$xdir$non_pic_object"
 
 	    # A standard non-PIC object
 	    func_append non_pic_objects " $non_pic_object"
-	    if test -z "$pic_object" || test none = "$pic_object"; then
-	      arg=$non_pic_object
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
 	    fi
 	  else
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
-	    non_pic_object=$pic_object
+	    non_pic_object="$pic_object"
 	    func_append non_pic_objects " $non_pic_object"
 	  fi
 	else
@@ -7384,7 +5943,7 @@ func_mode_link ()
 	  if $opt_dry_run; then
 	    # Extract subdirectory from the argument.
 	    func_dirname "$arg" "/" ""
-	    xdir=$func_dirname_result
+	    xdir="$func_dirname_result"
 
 	    func_lo2o "$arg"
 	    pic_object=$xdir$objdir/$func_lo2o_result
@@ -7392,7 +5951,7 @@ func_mode_link ()
 	    func_append libobjs " $pic_object"
 	    func_append non_pic_objects " $non_pic_object"
 	  else
-	    func_fatal_error "'$arg' is not a valid libtool object"
+	    func_fatal_error "\`$arg' is not a valid libtool object"
 	  fi
 	fi
 	;;
@@ -7408,11 +5967,11 @@ func_mode_link ()
 	# A libtool-controlled library.
 
 	func_resolve_sysroot "$arg"
-	if test dlfiles = "$prev"; then
+	if test "$prev" = dlfiles; then
 	  # This library was specified with -dlopen.
 	  func_append dlfiles " $func_resolve_sysroot_result"
 	  prev=
-	elif test dlprefiles = "$prev"; then
+	elif test "$prev" = dlprefiles; then
 	  # The library was specified with -dlpreopen.
 	  func_append dlprefiles " $func_resolve_sysroot_result"
 	  prev=
@@ -7427,7 +5986,7 @@ func_mode_link ()
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	func_quote_for_eval "$arg"
-	arg=$func_quote_for_eval_result
+	arg="$func_quote_for_eval_result"
 	;;
       esac # arg
 
@@ -7439,9 +5998,9 @@ func_mode_link ()
     done # argument parsing loop
 
     test -n "$prev" && \
-      func_fatal_help "the '$prevarg' option requires an argument"
+      func_fatal_help "the \`$prevarg' option requires an argument"
 
-    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"
       func_append compile_command " $arg"
       func_append finalize_command " $arg"
@@ -7450,23 +6009,20 @@ func_mode_link ()
     oldlibs=
     # calculate the name of the file, without its directory
     func_basename "$output"
-    outputname=$func_basename_result
-    libobjs_save=$libobjs
+    outputname="$func_basename_result"
+    libobjs_save="$libobjs"
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
-    # Definition is injected by LT_CONFIG during libtool generation.
-    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
-
     func_dirname "$output" "/" ""
-    output_objdir=$func_dirname_result$objdir
+    output_objdir="$func_dirname_result$objdir"
     func_to_tool_file "$output_objdir/"
     tool_output_objdir=$func_to_tool_file_result
     # Create the object directory.
@@ -7489,7 +6045,7 @@ func_mode_link ()
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if $opt_preserve_dup_deps; then
+      if $opt_preserve_dup_deps ; then
 	case "$libs " in
 	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	esac
@@ -7497,7 +6053,7 @@ func_mode_link ()
       func_append libs " $deplib"
     done
 
-    if test lib = "$linkmode"; then
+    if test "$linkmode" = lib; then
       libs="$predeps $libs $compiler_lib_search_path $postdeps"
 
       # Compute libraries that are listed more than once in $predeps
@@ -7529,7 +6085,7 @@ func_mode_link ()
 	  case $file in
 	  *.la) ;;
 	  *)
-	    func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
 	    ;;
 	  esac
 	done
@@ -7537,7 +6093,7 @@ func_mode_link ()
     prog)
 	compile_deplibs=
 	finalize_deplibs=
-	alldeplibs=false
+	alldeplibs=no
 	newdlfiles=
 	newdlprefiles=
 	passes="conv scan dlopen dlpreopen link"
@@ -7549,29 +6105,32 @@ func_mode_link ()
     for pass in $passes; do
       # The preopen pass in lib mode reverses $deplibs; put it back here
       # so that -L comes before libs that need it for instance...
-      if test lib,link = "$linkmode,$pass"; then
+      if test "$linkmode,$pass" = "lib,link"; then
 	## FIXME: Find the place where the list is rebuilt in the wrong
 	##        order, and fix it there properly
         tmp_deplibs=
 	for deplib in $deplibs; do
 	  tmp_deplibs="$deplib $tmp_deplibs"
 	done
-	deplibs=$tmp_deplibs
+	deplibs="$tmp_deplibs"
       fi
 
-      if test lib,link = "$linkmode,$pass" ||
-	 test prog,scan = "$linkmode,$pass"; then
-	libs=$deplibs
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
 	deplibs=
       fi
-      if test prog = "$linkmode"; then
+      if test "$linkmode" = prog; then
 	case $pass in
-	dlopen) libs=$dlfiles ;;
-	dlpreopen) libs=$dlprefiles ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link)
+	  libs="$deplibs %DEPLIBS%"
+	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+	  ;;
 	esac
       fi
-      if test lib,dlpreopen = "$linkmode,$pass"; then
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
 	# Collect and forward deplibs of preopened libtool libs
 	for lib in $dlprefiles; do
 	  # Ignore non-libtool-libs
@@ -7592,26 +6151,26 @@ func_mode_link ()
 	    esac
 	  done
 	done
-	libs=$dlprefiles
+	libs="$dlprefiles"
       fi
-      if test dlopen = "$pass"; then
+      if test "$pass" = dlopen; then
 	# Collect dlpreopened libraries
-	save_deplibs=$deplibs
+	save_deplibs="$deplibs"
 	deplibs=
       fi
 
       for deplib in $libs; do
 	lib=
-	found=false
+	found=no
 	case $deplib in
 	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
         |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
-	  if test prog,link = "$linkmode,$pass"; then
+	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    func_append compiler_flags " $deplib"
-	    if test lib = "$linkmode"; then
+	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -7621,13 +6180,13 @@ func_mode_link ()
 	  continue
 	  ;;
 	-l*)
-	  if test lib != "$linkmode" && test prog != "$linkmode"; then
-	    func_warning "'-l' is ignored for archives/objects"
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    func_warning "\`-l' is ignored for archives/objects"
 	    continue
 	  fi
 	  func_stripname '-l' '' "$deplib"
 	  name=$func_stripname_result
-	  if test lib = "$linkmode"; then
+	  if test "$linkmode" = lib; then
 	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
 	  else
 	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
@@ -7635,22 +6194,31 @@ func_mode_link ()
 	  for searchdir in $searchdirs; do
 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
-	      lib=$searchdir/lib$name$search_ext
+	      lib="$searchdir/lib${name}${search_ext}"
 	      if test -f "$lib"; then
-		if test .la = "$search_ext"; then
-		  found=:
+		if test "$search_ext" = ".la"; then
+		  found=yes
 		else
-		  found=false
+		  found=no
 		fi
 		break 2
 	      fi
 	    done
 	  done
-	  if $found; then
-	    # deplib is a libtool library
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
 	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
 	    # We need to do some special things here, and not later.
-	    if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)
 		if func_lalib_p "$lib"; then
@@ -7658,19 +6226,19 @@ func_mode_link ()
 		  old_library=
 		  func_source "$lib"
 		  for l in $old_library $library_names; do
-		    ll=$l
+		    ll="$l"
 		  done
-		  if test "X$ll" = "X$old_library"; then # only static version available
-		    found=false
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
 		    func_dirname "$lib" "" "."
-		    ladir=$func_dirname_result
+		    ladir="$func_dirname_result"
 		    lib=$ladir/$old_library
-		    if test prog,link = "$linkmode,$pass"; then
+		    if test "$linkmode,$pass" = "prog,link"; then
 		      compile_deplibs="$deplib $compile_deplibs"
 		      finalize_deplibs="$deplib $finalize_deplibs"
 		    else
 		      deplibs="$deplib $deplibs"
-		      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
 		    fi
 		    continue
 		  fi
@@ -7679,25 +6247,15 @@ func_mode_link ()
 	      *) ;;
 	      esac
 	    fi
-	  else
-	    # deplib doesn't seem to be a libtool library
-	    if test prog,link = "$linkmode,$pass"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
 	  fi
 	  ;; # -l
 	*.ltframework)
-	  if test prog,link = "$linkmode,$pass"; then
+	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    deplibs="$deplib $deplibs"
-	    if test lib = "$linkmode"; then
+	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -7710,18 +6268,18 @@ func_mode_link ()
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
-	    test conv = "$pass" && continue
+	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"
 	    func_stripname '-L' '' "$deplib"
 	    func_resolve_sysroot "$func_stripname_result"
 	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  prog)
-	    if test conv = "$pass"; then
+	    if test "$pass" = conv; then
 	      deplibs="$deplib $deplibs"
 	      continue
 	    fi
-	    if test scan = "$pass"; then
+	    if test "$pass" = scan; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -7732,13 +6290,13 @@ func_mode_link ()
 	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  *)
-	    func_warning "'-L' is ignored for archives/objects"
+	    func_warning "\`-L' is ignored for archives/objects"
 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
-	  if test link = "$pass"; then
+	  if test "$pass" = link; then
 	    func_stripname '-R' '' "$deplib"
 	    func_resolve_sysroot "$func_stripname_result"
 	    dir=$func_resolve_sysroot_result
@@ -7756,7 +6314,7 @@ func_mode_link ()
 	  lib=$func_resolve_sysroot_result
 	  ;;
 	*.$libext)
-	  if test conv = "$pass"; then
+	  if test "$pass" = conv; then
 	    deplibs="$deplib $deplibs"
 	    continue
 	  fi
@@ -7767,26 +6325,21 @@ func_mode_link ()
 	    case " $dlpreconveniencelibs " in
 	    *" $deplib "*) ;;
 	    *)
-	      valid_a_lib=false
+	      valid_a_lib=no
 	      case $deplibs_check_method in
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		    valid_a_lib=:
+		    valid_a_lib=yes
 		  fi
 		;;
 		pass_all)
-		  valid_a_lib=:
+		  valid_a_lib=yes
 		;;
 	      esac
-	      if $valid_a_lib; then
-		echo
-		$ECHO "*** Warning: Linking the shared library $output against the"
-		$ECHO "*** static library $deplib is not portable!"
-		deplibs="$deplib $deplibs"
-	      else
+	      if test "$valid_a_lib" != yes; then
 		echo
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
 		echo "*** I have the capability to make that library automatically link in when"
@@ -7794,13 +6347,18 @@ func_mode_link ()
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because the file extensions .$libext of this argument makes me believe"
 		echo "*** that it is just a static archive that I should not use here."
+	      else
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
 	      fi
 	      ;;
 	    esac
 	    continue
 	    ;;
 	  prog)
-	    if test link != "$pass"; then
+	    if test "$pass" != link; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -7811,10 +6369,10 @@ func_mode_link ()
 	  esac # linkmode
 	  ;; # *.$libext
 	*.lo | *.$objext)
-	  if test conv = "$pass"; then
+	  if test "$pass" = conv; then
 	    deplibs="$deplib $deplibs"
-	  elif test prog = "$linkmode"; then
-	    if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
 	      # If there is no dlopen support or we're linking statically,
 	      # we need to preload.
 	      func_append newdlprefiles " $deplib"
@@ -7827,20 +6385,22 @@ func_mode_link ()
 	  continue
 	  ;;
 	%DEPLIBS%)
-	  alldeplibs=:
+	  alldeplibs=yes
 	  continue
 	  ;;
 	esac # case $deplib
 
-	$found || test -f "$lib" \
-	  || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+	fi
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$lib" \
-	  || func_fatal_error "'$lib' is not a valid libtool archive"
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
 
 	func_dirname "$lib" "" "."
-	ladir=$func_dirname_result
+	ladir="$func_dirname_result"
 
 	dlname=
 	dlopen=
@@ -7870,36 +6430,36 @@ func_mode_link ()
 	  done
 	fi
 	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	if test lib,link = "$linkmode,$pass" ||
-	   test prog,scan = "$linkmode,$pass" ||
-	   { test prog != "$linkmode" && test lib != "$linkmode"; }; then
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
 	  test -n "$dlopen" && func_append dlfiles " $dlopen"
 	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
 	fi
 
-	if test conv = "$pass"; then
+	if test "$pass" = conv; then
 	  # Only check for convenience libraries
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
-	      func_fatal_error "cannot find name of link library for '$lib'"
+	      func_fatal_error "cannot find name of link library for \`$lib'"
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    func_append convenience " $ladir/$objdir/$old_library"
 	    func_append old_convenience " $ladir/$objdir/$old_library"
-	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
-	    func_fatal_error "'$lib' is not a convenience library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+	      if $opt_preserve_dup_deps ; then
+		case "$tmp_libs " in
+		*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+		esac
+	      fi
+	      func_append tmp_libs " $deplib"
+	    done
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    func_fatal_error "\`$lib' is not a convenience library"
 	  fi
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    deplibs="$deplib $deplibs"
-	    if $opt_preserve_dup_deps; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
-	      esac
-	    fi
-	    func_append tmp_libs " $deplib"
-	  done
 	  continue
 	fi # $pass = conv
 
@@ -7907,26 +6467,26 @@ func_mode_link ()
 	# Get the name of the library we link against.
 	linklib=
 	if test -n "$old_library" &&
-	   { test yes = "$prefer_static_libs" ||
-	     test built,no = "$prefer_static_libs,$installed"; }; then
+	   { test "$prefer_static_libs" = yes ||
+	     test "$prefer_static_libs,$installed" = "built,no"; }; then
 	  linklib=$old_library
 	else
 	  for l in $old_library $library_names; do
-	    linklib=$l
+	    linklib="$l"
 	  done
 	fi
 	if test -z "$linklib"; then
-	  func_fatal_error "cannot find name of link library for '$lib'"
+	  func_fatal_error "cannot find name of link library for \`$lib'"
 	fi
 
 	# This library was specified with -dlopen.
-	if test dlopen = "$pass"; then
-	  test -z "$libdir" \
-	    && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+	  fi
 	  if test -z "$dlname" ||
-	     test yes != "$dlopen_support" ||
-	     test no = "$build_libtool_libs"
-	  then
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
 	    # If there is no dlname, no dlopen support or we're linking
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
@@ -7940,40 +6500,40 @@ func_mode_link ()
 
 	# We need an absolute path.
 	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then
-	    func_warning "cannot determine absolute directory name of '$ladir'"
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
 	    func_warning "passing it literally to the linker, although it might fail"
-	    abs_ladir=$ladir
+	    abs_ladir="$ladir"
 	  fi
 	  ;;
 	esac
 	func_basename "$lib"
-	laname=$func_basename_result
+	laname="$func_basename_result"
 
 	# Find the relevant object directory and library name.
-	if test yes = "$installed"; then
+	if test "X$installed" = Xyes; then
 	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    func_warning "library '$lib' was moved."
-	    dir=$ladir
-	    absdir=$abs_ladir
-	    libdir=$abs_ladir
+	    func_warning "library \`$lib' was moved."
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
 	  else
-	    dir=$lt_sysroot$libdir
-	    absdir=$lt_sysroot$libdir
+	    dir="$lt_sysroot$libdir"
+	    absdir="$lt_sysroot$libdir"
 	  fi
-	  test yes = "$hardcode_automatic" && avoidtemprpath=yes
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 	else
 	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir=$ladir
-	    absdir=$abs_ladir
+	    dir="$ladir"
+	    absdir="$abs_ladir"
 	    # Remove this search path later
 	    func_append notinst_path " $abs_ladir"
 	  else
-	    dir=$ladir/$objdir
-	    absdir=$abs_ladir/$objdir
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
 	    # Remove this search path later
 	    func_append notinst_path " $abs_ladir"
 	  fi
@@ -7982,11 +6542,11 @@ func_mode_link ()
 	name=$func_stripname_result
 
 	# This library was specified with -dlpreopen.
-	if test dlpreopen = "$pass"; then
-	  if test -z "$libdir" && test prog = "$linkmode"; then
-	    func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
 	  fi
-	  case $host in
+	  case "$host" in
 	    # special handling for platforms with PE-DLLs.
 	    *cygwin* | *mingw* | *cegcc* )
 	      # Linker will automatically link against shared library if both
@@ -8030,9 +6590,9 @@ func_mode_link ()
 
 	if test -z "$libdir"; then
 	  # Link the convenience library
-	  if test lib = "$linkmode"; then
+	  if test "$linkmode" = lib; then
 	    deplibs="$dir/$old_library $deplibs"
-	  elif test prog,link = "$linkmode,$pass"; then
+	  elif test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$dir/$old_library $compile_deplibs"
 	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
 	  else
@@ -8042,14 +6602,14 @@ func_mode_link ()
 	fi
 
 
-	if test prog = "$linkmode" && test link != "$pass"; then
+	if test "$linkmode" = prog && test "$pass" != link; then
 	  func_append newlib_search_path " $ladir"
 	  deplibs="$lib $deplibs"
 
-	  linkalldeplibs=false
-	  if test no != "$link_all_deplibs" || test -z "$library_names" ||
-	     test no = "$build_libtool_libs"; then
-	    linkalldeplibs=:
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
 	  fi
 
 	  tmp_libs=
@@ -8061,14 +6621,14 @@ func_mode_link ()
 		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
-	    if $linkalldeplibs; then
+	    if test "$linkalldeplibs" = yes; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      # Need to hardcode shared library paths
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if $opt_preserve_dup_deps; then
+	    if $opt_preserve_dup_deps ; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
@@ -8078,15 +6638,15 @@ func_mode_link ()
 	  continue
 	fi # $linkmode = prog...
 
-	if test prog,link = "$linkmode,$pass"; then
+	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&
-	     { { test no = "$prefer_static_libs" ||
-	         test built,yes = "$prefer_static_libs,$installed"; } ||
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
 	       test -z "$old_library"; }; then
 	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
-	      case $temp_rpath: in
+	      case "$temp_rpath:" in
 	      *"$absdir:"*) ;;
 	      *) func_append temp_rpath "$absdir:" ;;
 	      esac
@@ -8115,9 +6675,9 @@ func_mode_link ()
 	    esac
 	  fi # $linkmode,$pass = prog,link...
 
-	  if $alldeplibs &&
-	     { test pass_all = "$deplibs_check_method" ||
-	       { test yes = "$build_libtool_libs" &&
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
 		 test -n "$library_names"; }; }; then
 	    # We only need to search for static libraries
 	    continue
@@ -8126,19 +6686,19 @@ func_mode_link ()
 
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs
-	if test built = "$use_static_libs" && test yes = "$installed"; then
+	if test "$use_static_libs" = built && test "$installed" = yes; then
 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
-	   { test no = "$use_static_libs" || test -z "$old_library"; }; then
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
 	  case $host in
-	  *cygwin* | *mingw* | *cegcc* | *os2*)
+	  *cygwin* | *mingw* | *cegcc*)
 	      # No point in relinking DLLs because paths are not encoded
 	      func_append notinst_deplibs " $lib"
 	      need_relink=no
 	    ;;
 	  *)
-	    if test no = "$installed"; then
+	    if test "$installed" = no; then
 	      func_append notinst_deplibs " $lib"
 	      need_relink=yes
 	    fi
@@ -8148,24 +6708,24 @@ func_mode_link ()
 
 	  # Warn about portability, can't link against -module's on some
 	  # systems (darwin).  Don't bleat about dlopened modules though!
-	  dlopenmodule=
+	  dlopenmodule=""
 	  for dlpremoduletest in $dlprefiles; do
 	    if test "X$dlpremoduletest" = "X$lib"; then
-	      dlopenmodule=$dlpremoduletest
+	      dlopenmodule="$dlpremoduletest"
 	      break
 	    fi
 	  done
-	  if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
 	    echo
-	    if test prog = "$linkmode"; then
+	    if test "$linkmode" = prog; then
 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
 	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
 	    $ECHO "*** $linklib is not portable!"
 	  fi
-	  if test lib = "$linkmode" &&
-	     test yes = "$hardcode_into_libs"; then
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	    # search path.
@@ -8193,43 +6753,43 @@ func_mode_link ()
 	    # figure out the soname
 	    set dummy $library_names
 	    shift
-	    realname=$1
+	    realname="$1"
 	    shift
 	    libname=`eval "\\$ECHO \"$libname_spec\""`
 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
-	      soname=$dlname
+	      soname="$dlname"
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw* | *cegcc* | *os2*)
+	      *cygwin* | mingw* | *cegcc*)
 	        func_arith $current - $age
 		major=$func_arith_result
-		versuffix=-$major
+		versuffix="-$major"
 		;;
 	      esac
 	      eval soname=\"$soname_spec\"
 	    else
-	      soname=$realname
+	      soname="$realname"
 	    fi
 
 	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot=$soname
+	    soroot="$soname"
 	    func_basename "$soroot"
-	    soname=$func_basename_result
+	    soname="$func_basename_result"
 	    func_stripname 'lib' '.dll' "$soname"
 	    newlib=libimp-$func_stripname_result.a
 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else
-	      func_verbose "extracting exported symbol list from '$soname'"
+	      func_verbose "extracting exported symbol list from \`$soname'"
 	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
 	    fi
 
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else
-	      func_verbose "generating import library for '$soname'"
+	      func_verbose "generating import library for \`$soname'"
 	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
 	    fi
 	    # make sure the library variables are pointing to the new library
@@ -8237,58 +6797,58 @@ func_mode_link ()
 	    linklib=$newlib
 	  fi # test -n "$old_archive_from_expsyms_cmds"
 
-	  if test prog = "$linkmode" || test relink != "$opt_mode"; then
+	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    lib_linked=yes
 	    case $hardcode_action in
 	    immediate | unsupported)
-	      if test no = "$hardcode_direct"; then
-		add=$dir/$linklib
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
 		case $host in
-		  *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
-		  *-*-sysv4*uw2*) add_dir=-L$dir ;;
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-		    *-*-unixware7*) add_dir=-L$dir ;;
+		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )
-		    # if the lib is a (non-dlopened) module then we cannot
+		    # if the lib is a (non-dlopened) module then we can not
 		    # link against it, someone is ignoring the earlier warnings
 		    if /usr/bin/file -L $add 2> /dev/null |
-			 $GREP ": [^:]* bundle" >/dev/null; then
+			 $GREP ": [^:]* bundle" >/dev/null ; then
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
-			if test -z "$old_library"; then
+			if test -z "$old_library" ; then
 			  echo
 			  echo "*** And there doesn't seem to be a static archive available"
 			  echo "*** The link will probably fail, sorry"
 			else
-			  add=$dir/$old_library
+			  add="$dir/$old_library"
 			fi
 		      elif test -n "$old_library"; then
-			add=$dir/$old_library
+			add="$dir/$old_library"
 		      fi
 		    fi
 		esac
-	      elif test no = "$hardcode_minus_L"; then
+	      elif test "$hardcode_minus_L" = no; then
 		case $host in
-		*-*-sunos*) add_shlibpath=$dir ;;
+		*-*-sunos*) add_shlibpath="$dir" ;;
 		esac
-		add_dir=-L$dir
-		add=-l$name
-	      elif test no = "$hardcode_shlibpath_var"; then
-		add_shlibpath=$dir
-		add=-l$name
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
 	      else
 		lib_linked=no
 	      fi
 	      ;;
 	    relink)
-	      if test yes = "$hardcode_direct" &&
-	         test no = "$hardcode_direct_absolute"; then
-		add=$dir/$linklib
-	      elif test yes = "$hardcode_minus_L"; then
-		add_dir=-L$absdir
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$absdir"
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 		  case $libdir in
@@ -8297,10 +6857,10 @@ func_mode_link ()
 		      ;;
 		  esac
 		fi
-		add=-l$name
-	      elif test yes = "$hardcode_shlibpath_var"; then
-		add_shlibpath=$dir
-		add=-l$name
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
 	      else
 		lib_linked=no
 	      fi
@@ -8308,7 +6868,7 @@ func_mode_link ()
 	    *) lib_linked=no ;;
 	    esac
 
-	    if test yes != "$lib_linked"; then
+	    if test "$lib_linked" != yes; then
 	      func_fatal_configuration "unsupported hardcode properties"
 	    fi
 
@@ -8318,15 +6878,15 @@ func_mode_link ()
 	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
 	      esac
 	    fi
-	    if test prog = "$linkmode"; then
+	    if test "$linkmode" = prog; then
 	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
 	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
-	      if test yes != "$hardcode_direct" &&
-		 test yes != "$hardcode_minus_L" &&
-		 test yes = "$hardcode_shlibpath_var"; then
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
+		 test "$hardcode_shlibpath_var" = yes; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
 		*) func_append finalize_shlibpath "$libdir:" ;;
@@ -8335,33 +6895,33 @@ func_mode_link ()
 	    fi
 	  fi
 
-	  if test prog = "$linkmode" || test relink = "$opt_mode"; then
+	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.
-	    if test yes = "$hardcode_direct" &&
-	       test no = "$hardcode_direct_absolute"; then
-	      add=$libdir/$linklib
-	    elif test yes = "$hardcode_minus_L"; then
-	      add_dir=-L$libdir
-	      add=-l$name
-	    elif test yes = "$hardcode_shlibpath_var"; then
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
 	      case :$finalize_shlibpath: in
 	      *":$libdir:"*) ;;
 	      *) func_append finalize_shlibpath "$libdir:" ;;
 	      esac
-	      add=-l$name
-	    elif test yes = "$hardcode_automatic"; then
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
 	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib"; then
-		add=$inst_prefix_dir$libdir/$linklib
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+		add="$inst_prefix_dir$libdir/$linklib"
 	      else
-		add=$libdir/$linklib
+		add="$libdir/$linklib"
 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir=-L$libdir
+	      add_dir="-L$libdir"
 	      # Try looking first in the location we're being installed to.
 	      if test -n "$inst_prefix_dir"; then
 		case $libdir in
@@ -8370,10 +6930,10 @@ func_mode_link ()
 		    ;;
 		esac
 	      fi
-	      add=-l$name
+	      add="-l$name"
 	    fi
 
-	    if test prog = "$linkmode"; then
+	    if test "$linkmode" = prog; then
 	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
 	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
 	    else
@@ -8381,43 +6941,43 @@ func_mode_link ()
 	      test -n "$add" && deplibs="$add $deplibs"
 	    fi
 	  fi
-	elif test prog = "$linkmode"; then
+	elif test "$linkmode" = prog; then
 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
 	  # is not unsupported.  This is valid on all known static and
 	  # shared platforms.
-	  if test unsupported != "$hardcode_direct"; then
-	    test -n "$old_library" && linklib=$old_library
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
 	    compile_deplibs="$dir/$linklib $compile_deplibs"
 	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
 	  else
 	    compile_deplibs="-l$name -L$dir $compile_deplibs"
 	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
 	  fi
-	elif test yes = "$build_libtool_libs"; then
+	elif test "$build_libtool_libs" = yes; then
 	  # Not a shared library
-	  if test pass_all != "$deplibs_check_method"; then
+	  if test "$deplibs_check_method" != pass_all; then
 	    # We're trying link a shared library against a static one
 	    # but the system doesn't support it.
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
 	    echo
-	    $ECHO "*** Warning: This system cannot link to static lib archive $lib."
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
 	    echo "*** I have the capability to make that library automatically link in when"
 	    echo "*** you link to this library.  But I can only do this if you have a"
 	    echo "*** shared version of the library, which you do not appear to have."
-	    if test yes = "$module"; then
+	    if test "$module" = yes; then
 	      echo "*** But as you try to build a module library, libtool will still create "
 	      echo "*** a static module, that should work as long as the dlopening application"
 	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
 		echo
 		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
 		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** 'nm' from GNU binutils and a full rebuild may help."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
-	      if test no = "$build_old_libs"; then
+	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
@@ -8430,11 +6990,11 @@ func_mode_link ()
 	  fi
 	fi # link shared/static library?
 
-	if test lib = "$linkmode"; then
+	if test "$linkmode" = lib; then
 	  if test -n "$dependency_libs" &&
-	     { test yes != "$hardcode_into_libs" ||
-	       test yes = "$build_old_libs" ||
-	       test yes = "$link_static"; }; then
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
@@ -8448,12 +7008,12 @@ func_mode_link ()
 	      *) func_append temp_deplibs " $libdir";;
 	      esac
 	    done
-	    dependency_libs=$temp_deplibs
+	    dependency_libs="$temp_deplibs"
 	  fi
 
 	  func_append newlib_search_path " $absdir"
 	  # Link against this library
-	  test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 	  # ... and its dependency_libs
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
@@ -8463,7 +7023,7 @@ func_mode_link ()
                    func_resolve_sysroot "$func_stripname_result";;
               *) func_resolve_sysroot "$deplib" ;;
             esac
-	    if $opt_preserve_dup_deps; then
+	    if $opt_preserve_dup_deps ; then
 	      case "$tmp_libs " in
 	      *" $func_resolve_sysroot_result "*)
                 func_append specialdeplibs " $func_resolve_sysroot_result" ;;
@@ -8472,12 +7032,12 @@ func_mode_link ()
 	    func_append tmp_libs " $func_resolve_sysroot_result"
 	  done
 
-	  if test no != "$link_all_deplibs"; then
+	  if test "$link_all_deplibs" != no; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
 	      path=
 	      case $deplib in
-	      -L*) path=$deplib ;;
+	      -L*) path="$deplib" ;;
 	      *.la)
 	        func_resolve_sysroot "$deplib"
 	        deplib=$func_resolve_sysroot_result
@@ -8485,12 +7045,12 @@ func_mode_link ()
 		dir=$func_dirname_result
 		# We need an absolute path.
 		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then
-		    func_warning "cannot determine absolute directory name of '$dir'"
-		    absdir=$dir
+		    func_warning "cannot determine absolute directory name of \`$dir'"
+		    absdir="$dir"
 		  fi
 		  ;;
 		esac
@@ -8498,35 +7058,35 @@ func_mode_link ()
 		case $host in
 		*-*-darwin*)
 		  depdepl=
-		  eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names"; then
-		    for tmp in $deplibrary_names; do
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$absdir/$objdir/$depdepl"; then
-		      depdepl=$absdir/$objdir/$depdepl
-		      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                       if test -z "$darwin_install_name"; then
-                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
-		      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
-		      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
+		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
 		      path=
 		    fi
 		  fi
 		  ;;
 		*)
-		  path=-L$absdir/$objdir
+		  path="-L$absdir/$objdir"
 		  ;;
 		esac
 		else
-		  eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  test -z "$libdir" && \
-		    func_fatal_error "'$deplib' is not a valid libtool archive"
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
 		  test "$absdir" != "$libdir" && \
-		    func_warning "'$deplib' seems to be moved"
+		    func_warning "\`$deplib' seems to be moved"
 
-		  path=-L$absdir
+		  path="-L$absdir"
 		fi
 		;;
 	      esac
@@ -8538,23 +7098,23 @@ func_mode_link ()
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs
-      if test link = "$pass"; then
-	if test prog = "$linkmode"; then
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
 	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	fi
       fi
-      dependency_libs=$newdependency_libs
-      if test dlpreopen = "$pass"; then
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
 	# Link the dlpreopened libraries before other libraries
 	for deplib in $save_deplibs; do
 	  deplibs="$deplib $deplibs"
 	done
       fi
-      if test dlopen != "$pass"; then
-	test conv = "$pass" || {
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
 	  # Make sure lib_search_path contains only unique directories.
 	  lib_search_path=
 	  for dir in $newlib_search_path; do
@@ -8564,12 +7124,12 @@ func_mode_link ()
 	    esac
 	  done
 	  newlib_search_path=
-	}
+	fi
 
-	if test prog,link = "$linkmode,$pass"; then
-	  vars="compile_deplibs finalize_deplibs"
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
 	else
-	  vars=deplibs
+	  vars="compile_deplibs finalize_deplibs"
 	fi
 	for var in $vars dependency_libs; do
 	  # Add libraries to $var in reverse order
@@ -8627,93 +7187,62 @@ func_mode_link ()
 	  eval $var=\"$tmp_libs\"
 	done # for var
       fi
-
-      # Add Sun CC postdeps if required:
-      test CXX = "$tagname" && {
-        case $host_os in
-        linux*)
-          case `$CC -V 2>&1 | sed 5q` in
-          *Sun\ C*) # Sun C++ 5.9
-            func_suncc_cstd_abi
-
-            if test no != "$suncc_use_cstd_abi"; then
-              func_append postdeps ' -library=Cstd -library=Crun'
-            fi
-            ;;
-          esac
-          ;;
-
-        solaris*)
-          func_cc_basename "$CC"
-          case $func_cc_basename_result in
-          CC* | sunCC*)
-            func_suncc_cstd_abi
-
-            if test no != "$suncc_use_cstd_abi"; then
-              func_append postdeps ' -library=Cstd -library=Crun'
-            fi
-            ;;
-          esac
-          ;;
-        esac
-      }
-
       # Last step: remove runtime libs from dependency_libs
       # (they stay in deplibs)
       tmp_libs=
-      for i in $dependency_libs; do
+      for i in $dependency_libs ; do
 	case " $predeps $postdeps $compiler_lib_search_path " in
 	*" $i "*)
-	  i=
+	  i=""
 	  ;;
 	esac
-	if test -n "$i"; then
+	if test -n "$i" ; then
 	  func_append tmp_libs " $i"
 	fi
       done
       dependency_libs=$tmp_libs
     done # for pass
-    if test prog = "$linkmode"; then
-      dlfiles=$newdlfiles
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
     fi
-    if test prog = "$linkmode" || test lib = "$linkmode"; then
-      dlprefiles=$newdlprefiles
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
+      dlprefiles="$newdlprefiles"
     fi
 
     case $linkmode in
     oldlib)
-      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
-	func_warning "'-dlopen' is ignored for archives"
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for archives"
       fi
 
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	func_warning "'-l' and '-L' are ignored for archives" ;;
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
       esac
 
       test -n "$rpath" && \
-	func_warning "'-rpath' is ignored for archives"
+	func_warning "\`-rpath' is ignored for archives"
 
       test -n "$xrpath" && \
-	func_warning "'-R' is ignored for archives"
+	func_warning "\`-R' is ignored for archives"
 
       test -n "$vinfo" && \
-	func_warning "'-version-info/-version-number' is ignored for archives"
+	func_warning "\`-version-info/-version-number' is ignored for archives"
 
       test -n "$release" && \
-	func_warning "'-release' is ignored for archives"
+	func_warning "\`-release' is ignored for archives"
 
       test -n "$export_symbols$export_symbols_regex" && \
-	func_warning "'-export-symbols' is ignored for archives"
+	func_warning "\`-export-symbols' is ignored for archives"
 
       # Now set the variables for building old libraries.
       build_libtool_libs=no
-      oldlibs=$output
+      oldlibs="$output"
       func_append objs "$old_deplibs"
       ;;
 
     lib)
-      # Make sure we only generate libraries of the form 'libNAME.la'.
+      # Make sure we only generate libraries of the form `libNAME.la'.
       case $outputname in
       lib*)
 	func_stripname 'lib' '.la' "$outputname"
@@ -8722,10 +7251,10 @@ func_mode_link ()
 	eval libname=\"$libname_spec\"
 	;;
       *)
-	test no = "$module" \
-	  && func_fatal_help "libtool library '$output' must begin with 'lib'"
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
 
-	if test no != "$need_lib_prefix"; then
+	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required
 	  func_stripname '' '.la' "$outputname"
 	  name=$func_stripname_result
@@ -8739,8 +7268,8 @@ func_mode_link ()
       esac
 
       if test -n "$objs"; then
-	if test pass_all != "$deplibs_check_method"; then
-	  func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
+	if test "$deplibs_check_method" != pass_all; then
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 	else
 	  echo
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
@@ -8749,21 +7278,21 @@ func_mode_link ()
 	fi
       fi
 
-      test no = "$dlself" \
-	|| func_warning "'-dlopen self' is ignored for libtool libraries"
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
 
       set dummy $rpath
       shift
-      test 1 -lt "$#" \
-	&& func_warning "ignoring multiple '-rpath's for a libtool library"
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
 
-      install_libdir=$1
+      install_libdir="$1"
 
       oldlibs=
       if test -z "$rpath"; then
-	if test yes = "$build_libtool_libs"; then
+	if test "$build_libtool_libs" = yes; then
 	  # Building a libtool convenience library.
-	  # Some compilers have problems with a '.al' extension so
+	  # Some compilers have problems with a `.al' extension so
 	  # convenience libraries should have the same extension an
 	  # archive normally would.
 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
@@ -8772,20 +7301,20 @@ func_mode_link ()
 	fi
 
 	test -n "$vinfo" && \
-	  func_warning "'-version-info/-version-number' is ignored for convenience libraries"
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
 
 	test -n "$release" && \
-	  func_warning "'-release' is ignored for convenience libraries"
+	  func_warning "\`-release' is ignored for convenience libraries"
       else
 
 	# Parse the version information argument.
-	save_ifs=$IFS; IFS=:
+	save_ifs="$IFS"; IFS=':'
 	set dummy $vinfo 0 0 0
 	shift
-	IFS=$save_ifs
+	IFS="$save_ifs"
 
 	test -n "$7" && \
-	  func_fatal_help "too many parameters to '-version-info'"
+	  func_fatal_help "too many parameters to \`-version-info'"
 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
@@ -8793,42 +7322,45 @@ func_mode_link ()
 
 	case $vinfo_number in
 	yes)
-	  number_major=$1
-	  number_minor=$2
-	  number_revision=$3
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
 	  # and those that subtract age and use age as
 	  # a minor version.  But, then there is irix
-	  # that has an extra 1 added just for fun
+	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
 	  # correct linux to gnu/linux during the next big refactor
-	  darwin|freebsd-elf|linux|osf|windows|none)
+	  darwin|linux|osf|windows|none)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
-	    age=$number_minor
-	    revision=$number_revision
+	    age="$number_minor"
+	    revision="$number_revision"
 	    ;;
-	  freebsd-aout|qnx|sunos)
-	    current=$number_major
-	    revision=$number_minor
-	    age=0
+	  freebsd-aout|freebsd-elf|qnx|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
 	    ;;
 	  irix|nonstopux)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
-	    age=$number_minor
-	    revision=$number_minor
+	    age="$number_minor"
+	    revision="$number_minor"
 	    lt_irix_increment=no
 	    ;;
+	  *)
+	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+	    ;;
 	  esac
 	  ;;
 	no)
-	  current=$1
-	  revision=$2
-	  age=$3
+	  current="$1"
+	  revision="$2"
+	  age="$3"
 	  ;;
 	esac
 
@@ -8836,30 +7368,30 @@ func_mode_link ()
 	case $current in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  func_error "CURRENT '$current' must be a nonnegative integer"
-	  func_fatal_error "'$vinfo' is not valid version information"
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $revision in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  func_error "REVISION '$revision' must be a nonnegative integer"
-	  func_fatal_error "'$vinfo' is not valid version information"
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $age in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  func_error "AGE '$age' must be a nonnegative integer"
-	  func_fatal_error "'$vinfo' is not valid version information"
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then
-	  func_error "AGE '$age' is greater than the current interface number '$current'"
-	  func_fatal_error "'$vinfo' is not valid version information"
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	fi
 
 	# Calculate the version variables.
@@ -8874,36 +7406,26 @@ func_mode_link ()
 	  # verstring for coding it into the library header
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix=$major.$age.$revision
+	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
 	  func_arith $current + 1
 	  minor_current=$func_arith_result
-	  xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-          # On Darwin other compilers
-          case $CC in
-              nagfor*)
-                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
-                  ;;
-              *)
-                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-                  ;;
-          esac
 	  ;;
 
 	freebsd-aout)
-	  major=.$current
-	  versuffix=.$current.$revision
+	  major=".$current"
+	  versuffix=".$current.$revision";
 	  ;;
 
 	freebsd-elf)
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix=$major.$age.$revision
+	  major=".$current"
+	  versuffix=".$current"
 	  ;;
 
 	irix | nonstopux)
-	  if test no = "$lt_irix_increment"; then
+	  if test "X$lt_irix_increment" = "Xno"; then
 	    func_arith $current - $age
 	  else
 	    func_arith $current - $age + 1
@@ -8914,74 +7436,69 @@ func_mode_link ()
 	    nonstopux) verstring_prefix=nonstopux ;;
 	    *)         verstring_prefix=sgi ;;
 	  esac
-	  verstring=$verstring_prefix$major.$revision
+	  verstring="$verstring_prefix$major.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
-	  while test 0 -ne "$loop"; do
+	  while test "$loop" -ne 0; do
 	    func_arith $revision - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result
-	    verstring=$verstring_prefix$major.$iface:$verstring
+	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
 
-	  # Before this point, $major must not contain '.'.
+	  # Before this point, $major must not contain `.'.
 	  major=.$major
-	  versuffix=$major.$revision
+	  versuffix="$major.$revision"
 	  ;;
 
 	linux) # correct to gnu/linux during the next big refactor
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix=$major.$age.$revision
+	  versuffix="$major.$age.$revision"
 	  ;;
 
 	osf)
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix=.$current.$age.$revision
-	  verstring=$current.$age.$revision
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
-	  while test 0 -ne "$loop"; do
+	  while test "$loop" -ne 0; do
 	    func_arith $current - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result
-	    verstring=$verstring:$iface.0
+	    verstring="$verstring:${iface}.0"
 	  done
 
 	  # Make executables depend on our current version.
-	  func_append verstring ":$current.0"
+	  func_append verstring ":${current}.0"
 	  ;;
 
 	qnx)
-	  major=.$current
-	  versuffix=.$current
-	  ;;
-
-	sco)
-	  major=.$current
-	  versuffix=.$current
+	  major=".$current"
+	  versuffix=".$current"
 	  ;;
 
 	sunos)
-	  major=.$current
-	  versuffix=.$current.$revision
+	  major=".$current"
+	  versuffix=".$current.$revision"
 	  ;;
 
 	windows)
 	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 file systems.
+	  # extension on DOS 8.3 filesystems.
 	  func_arith $current - $age
 	  major=$func_arith_result
-	  versuffix=-$major
+	  versuffix="-$major"
 	  ;;
 
 	*)
-	  func_fatal_configuration "unknown library version type '$version_type'"
+	  func_fatal_configuration "unknown library version type \`$version_type'"
 	  ;;
 	esac
 
@@ -8995,45 +7512,42 @@ func_mode_link ()
 	    verstring=
 	    ;;
 	  *)
-	    verstring=0.0
+	    verstring="0.0"
 	    ;;
 	  esac
-	  if test no = "$need_version"; then
+	  if test "$need_version" = no; then
 	    versuffix=
 	  else
-	    versuffix=.0.0
+	    versuffix=".0.0"
 	  fi
 	fi
 
 	# Remove version info from name if versioning should be avoided
-	if test yes,no = "$avoid_version,$need_version"; then
+	if test "$avoid_version" = yes && test "$need_version" = no; then
 	  major=
 	  versuffix=
-	  verstring=
+	  verstring=""
 	fi
 
 	# Check to see if the archive will have undefined symbols.
-	if test yes = "$allow_undefined"; then
-	  if test unsupported = "$allow_undefined_flag"; then
-	    if test yes = "$build_old_libs"; then
-	      func_warning "undefined symbols not allowed in $host shared libraries; building static only"
-	      build_libtool_libs=no
-	    else
-	      func_fatal_error "can't build $host shared library unless -no-undefined is specified"
-	    fi
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    func_warning "undefined symbols not allowed in $host shared libraries"
+	    build_libtool_libs=no
+	    build_old_libs=yes
 	  fi
 	else
 	  # Don't allow undefined symbols.
-	  allow_undefined_flag=$no_undefined_flag
+	  allow_undefined_flag="$no_undefined_flag"
 	fi
 
       fi
 
-      func_generate_dlsyms "$libname" "$libname" :
+      func_generate_dlsyms "$libname" "$libname" "yes"
       func_append libobjs " $symfileobj"
-      test " " = "$libobjs" && libobjs=
+      test "X$libobjs" = "X " && libobjs=
 
-      if test relink != "$opt_mode"; then
+      if test "$opt_mode" != relink; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
@@ -9042,8 +7556,8 @@ func_mode_link ()
 	  case $p in
 	    *.$objext | *.gcno)
 	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
-	       if test -n "$precious_files_regex"; then
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
 		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
 		 then
 		   continue
@@ -9059,11 +7573,11 @@ func_mode_link ()
       fi
 
       # Now set the variables for building old libraries.
-      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
 	func_append oldlibs " $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
@@ -9084,13 +7598,13 @@ func_mode_link ()
 	  *) func_append finalize_rpath " $libdir" ;;
 	  esac
 	done
-	if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
 	  dependency_libs="$temp_xrpath $dependency_libs"
 	fi
       fi
 
       # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles=$dlfiles
+      old_dlfiles="$dlfiles"
       dlfiles=
       for lib in $old_dlfiles; do
 	case " $dlprefiles $dlfiles " in
@@ -9100,7 +7614,7 @@ func_mode_link ()
       done
 
       # Make sure dlprefiles contains only unique files
-      old_dlprefiles=$dlprefiles
+      old_dlprefiles="$dlprefiles"
       dlprefiles=
       for lib in $old_dlprefiles; do
 	case "$dlprefiles " in
@@ -9109,7 +7623,7 @@ func_mode_link ()
 	esac
       done
 
-      if test yes = "$build_libtool_libs"; then
+      if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
@@ -9133,7 +7647,7 @@ func_mode_link ()
 	    ;;
 	  *)
 	    # Add libc to deplibs on all other systems if necessary.
-	    if test yes = "$build_libtool_need_lc"; then
+	    if test "$build_libtool_need_lc" = "yes"; then
 	      func_append deplibs " -lc"
 	    fi
 	    ;;
@@ -9149,9 +7663,9 @@ func_mode_link ()
 	# I'm not sure if I'm treating the release correctly.  I think
 	# release should show up in the -l (ie -lgmp5) so we don't want to
 	# add it in twice.  Is that correct?
-	release=
-	versuffix=
-	major=
+	release=""
+	versuffix=""
+	major=""
 	newdeplibs=
 	droppeddeps=no
 	case $deplibs_check_method in
@@ -9180,20 +7694,20 @@ EOF
 	      -l*)
 		func_stripname -l '' "$i"
 		name=$func_stripname_result
-		if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
 		    func_append newdeplibs " $i"
-		    i=
+		    i=""
 		    ;;
 		  esac
 		fi
-		if test -n "$i"; then
+		if test -n "$i" ; then
 		  libname=`eval "\\$ECHO \"$libname_spec\""`
 		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		  set dummy $deplib_matches; shift
 		  deplib_match=$1
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		    func_append newdeplibs " $i"
 		  else
 		    droppeddeps=yes
@@ -9223,20 +7737,20 @@ EOF
 		$opt_dry_run || $RM conftest
 		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
-		  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
 		    *" $i "*)
 		      func_append newdeplibs " $i"
-		      i=
+		      i=""
 		      ;;
 		    esac
 		  fi
-		  if test -n "$i"; then
+		  if test -n "$i" ; then
 		    libname=`eval "\\$ECHO \"$libname_spec\""`
 		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		    set dummy $deplib_matches; shift
 		    deplib_match=$1
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		      func_append newdeplibs " $i"
 		    else
 		      droppeddeps=yes
@@ -9273,24 +7787,24 @@ EOF
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result
-	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  func_append newdeplibs " $a_deplib"
-		  a_deplib=
+		  a_deplib=""
 		  ;;
 		esac
 	      fi
-	      if test -n "$a_deplib"; then
+	      if test -n "$a_deplib" ; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
 		if test -n "$file_magic_glob"; then
 		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
 		else
 		  libnameglob=$libname
 		fi
-		test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
+		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  if test yes = "$want_nocaseglob"; then
+		  if test "$want_nocaseglob" = yes; then
 		    shopt -s nocaseglob
 		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
 		    $nocaseglob
@@ -9308,25 +7822,25 @@ EOF
 		      # We might still enter an endless loop, since a link
 		      # loop can be closed while we follow links,
 		      # but so what?
-		      potlib=$potent_lib
+		      potlib="$potent_lib"
 		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
-			*) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
 			 $SED -e 10q |
 			 $EGREP "$file_magic_regex" > /dev/null; then
 			func_append newdeplibs " $a_deplib"
-			a_deplib=
+			a_deplib=""
 			break 2
 		      fi
 		  done
 		done
 	      fi
-	      if test -n "$a_deplib"; then
+	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
 		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -9334,7 +7848,7 @@ EOF
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib"; then
+		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -9357,30 +7871,30 @@ EOF
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result
-	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  func_append newdeplibs " $a_deplib"
-		  a_deplib=
+		  a_deplib=""
 		  ;;
 		esac
 	      fi
-	      if test -n "$a_deplib"; then
+	      if test -n "$a_deplib" ; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
-		    potlib=$potent_lib # see symlink-check above in file_magic test
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
 		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      func_append newdeplibs " $a_deplib"
-		      a_deplib=
+		      a_deplib=""
 		      break 2
 		    fi
 		  done
 		done
 	      fi
-	      if test -n "$a_deplib"; then
+	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
 		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -9388,7 +7902,7 @@ EOF
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib"; then
+		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -9404,18 +7918,18 @@ EOF
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
-	  newdeplibs=
+	  newdeplibs=""
 	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
-	  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
-	    for i in $predeps $postdeps; do
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
 	    done
 	  fi
 	  case $tmp_deplibs in
 	  *[!\	\ ]*)
 	    echo
-	    if test none = "$deplibs_check_method"; then
+	    if test "X$deplibs_check_method" = "Xnone"; then
 	      echo "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
 	      echo "*** Warning: inter-library dependencies are not known to be supported."
@@ -9439,8 +7953,8 @@ EOF
 	  ;;
 	esac
 
-	if test yes = "$droppeddeps"; then
-	  if test yes = "$module"; then
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
 	    echo
 	    echo "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
@@ -9449,12 +7963,12 @@ EOF
 	    if test -z "$global_symbol_pipe"; then
 	      echo
 	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
 	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
-	    if test no = "$build_old_libs"; then
-	      oldlibs=$output_objdir/$libname.$libext
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
 	      build_libtool_libs=module
 	      build_old_libs=yes
 	    else
@@ -9465,14 +7979,14 @@ EOF
 	    echo "*** automatically added whenever a program is linked with this library"
 	    echo "*** or is declared to -dlopen it."
 
-	    if test no = "$allow_undefined"; then
+	    if test "$allow_undefined" = no; then
 	      echo
 	      echo "*** Since this library must not contain undefined symbols,"
 	      echo "*** because either the platform does not support them or"
 	      echo "*** it was explicitly requested with -no-undefined,"
 	      echo "*** libtool will only create a static version of it."
-	      if test no = "$build_old_libs"; then
-		oldlibs=$output_objdir/$libname.$libext
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
@@ -9518,7 +8032,7 @@ EOF
 	*) func_append new_libs " $deplib" ;;
 	esac
       done
-      deplibs=$new_libs
+      deplibs="$new_libs"
 
       # All the library-specific variables (install_libdir is set above).
       library_names=
@@ -9526,25 +8040,25 @@ EOF
       dlname=
 
       # Test again, we may have decided not to build it any more
-      if test yes = "$build_libtool_libs"; then
-	# Remove $wl instances when linking with ld.
+      if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
 	# FIXME: should test the right _cmds variable.
 	case $archive_cmds in
 	  *\$LD\ *) wl= ;;
         esac
-	if test yes = "$hardcode_into_libs"; then
+	if test "$hardcode_into_libs" = yes; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
 	  dep_rpath=
-	  rpath=$finalize_rpath
-	  test relink = "$opt_mode" || rpath=$compile_rpath$rpath
+	  rpath="$finalize_rpath"
+	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
 	  for libdir in $rpath; do
 	    if test -n "$hardcode_libdir_flag_spec"; then
 	      if test -n "$hardcode_libdir_separator"; then
 		func_replace_sysroot "$libdir"
 		libdir=$func_replace_sysroot_result
 		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs=$libdir
+		  hardcode_libdirs="$libdir"
 		else
 		  # Just accumulate the unique libdirs.
 		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -9569,7 +8083,7 @@ EOF
 	  # Substitute the hardcoded libdirs into the rpath.
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
-	    libdir=$hardcode_libdirs
+	    libdir="$hardcode_libdirs"
 	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
@@ -9583,8 +8097,8 @@ EOF
 	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
 	fi
 
-	shlibpath=$finalize_shlibpath
-	test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
+	shlibpath="$finalize_shlibpath"
+	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
 	if test -n "$shlibpath"; then
 	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
 	fi
@@ -9594,19 +8108,19 @@ EOF
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
 	shift
-	realname=$1
+	realname="$1"
 	shift
 
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
 	else
-	  soname=$realname
+	  soname="$realname"
 	fi
 	if test -z "$dlname"; then
 	  dlname=$soname
 	fi
 
-	lib=$output_objdir/$realname
+	lib="$output_objdir/$realname"
 	linknames=
 	for link
 	do
@@ -9620,7 +8134,7 @@ EOF
 	delfiles=
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
-	  export_symbols=$output_objdir/$libname.uexp
+	  export_symbols="$output_objdir/$libname.uexp"
 	  func_append delfiles " $export_symbols"
 	fi
 
@@ -9629,31 +8143,31 @@ EOF
 	cygwin* | mingw* | cegcc*)
 	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
 	    # exporting using user supplied symfile
-	    func_dll_def_p "$export_symbols" || {
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
 	      # and it's NOT already a .def file. Must figure out
 	      # which of the given symbols are data symbols and tag
 	      # them as such. So, trigger use of export_symbols_cmds.
 	      # export_symbols gets reassigned inside the "prepare
 	      # the list of exported symbols" if statement, so the
 	      # include_expsyms logic still works.
-	      orig_export_symbols=$export_symbols
+	      orig_export_symbols="$export_symbols"
 	      export_symbols=
 	      always_export_symbols=yes
-	    }
+	    fi
 	  fi
 	  ;;
 	esac
 
 	# Prepare the list of exported symbols
 	if test -z "$export_symbols"; then
-	  if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
-	    func_verbose "generating symbol list for '$libname.la'"
-	    export_symbols=$output_objdir/$libname.exp
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
 	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
-	    save_ifs=$IFS; IFS='~'
+	    save_ifs="$IFS"; IFS='~'
 	    for cmd1 in $cmds; do
-	      IFS=$save_ifs
+	      IFS="$save_ifs"
 	      # Take the normal branch if the nm_file_list_spec branch
 	      # doesn't work or if tool conversion is not needed.
 	      case $nm_file_list_spec~$to_tool_file_cmd in
@@ -9667,7 +8181,7 @@ EOF
 		  try_normal_branch=no
 		  ;;
 	      esac
-	      if test yes = "$try_normal_branch" \
+	      if test "$try_normal_branch" = yes \
 		 && { test "$len" -lt "$max_cmd_len" \
 		      || test "$max_cmd_len" -le -1; }
 	      then
@@ -9678,7 +8192,7 @@ EOF
 		output_la=$func_basename_result
 		save_libobjs=$libobjs
 		save_output=$output
-		output=$output_objdir/$output_la.nm
+		output=${output_objdir}/${output_la}.nm
 		func_to_tool_file "$output"
 		libobjs=$nm_file_list_spec$func_to_tool_file_result
 		func_append delfiles " $output"
@@ -9701,8 +8215,8 @@ EOF
 		break
 	      fi
 	    done
-	    IFS=$save_ifs
-	    if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 	    fi
@@ -9710,16 +8224,16 @@ EOF
 	fi
 
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  tmp_export_symbols=$export_symbols
-	  test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
 	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
-	if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
 	  # The given exports_symbols file has to be filtered, so filter it.
-	  func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
 	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	  # 's' commands, which not all seds can handle. GNU sed should be fine
+	  # 's' commands which not all seds can handle. GNU sed should be fine
 	  # though. Also, the filter scales superlinearly with the number of
 	  # global variables. join(1) would be nice here, but unfortunately
 	  # isn't a blessed tool.
@@ -9738,11 +8252,11 @@ EOF
 	    ;;
 	  esac
 	done
-	deplibs=$tmp_deplibs
+	deplibs="$tmp_deplibs"
 
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec" &&
-	    test yes = "$compiler_needs_object" &&
+	    test "$compiler_needs_object" = yes &&
 	    test -z "$libobjs"; then
 	    # extract the archives, so we have objects to list.
 	    # TODO: could optimize this to just extract one archive.
@@ -9753,7 +8267,7 @@ EOF
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	    test "X$libobjs" = "X " && libobjs=
 	  else
-	    gentop=$output_objdir/${outputname}x
+	    gentop="$output_objdir/${outputname}x"
 	    func_append generated " $gentop"
 
 	    func_extract_archives $gentop $convenience
@@ -9762,18 +8276,18 @@ EOF
 	  fi
 	fi
 
-	if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  func_append linker_flags " $flag"
 	fi
 
 	# Make a backup of the uninstalled library when relinking
-	if test relink = "$opt_mode"; then
+	if test "$opt_mode" = relink; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 
 	# Do each of the archive commands.
-	if test yes = "$module" && test -n "$module_cmds"; then
+	if test "$module" = yes && test -n "$module_cmds" ; then
 	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	    eval test_cmds=\"$module_expsym_cmds\"
 	    cmds=$module_expsym_cmds
@@ -9791,7 +8305,7 @@ EOF
 	  fi
 	fi
 
-	if test : != "$skipped_export" &&
+	if test "X$skipped_export" != "X:" &&
 	   func_len " $test_cmds" &&
 	   len=$func_len_result &&
 	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
@@ -9824,8 +8338,8 @@ EOF
 	  last_robj=
 	  k=1
 
-	  if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
-	    output=$output_objdir/$output_la.lnkscript
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
 	    func_verbose "creating GNU ld script: $output"
 	    echo 'INPUT (' > $output
 	    for obj in $save_libobjs
@@ -9837,14 +8351,14 @@ EOF
 	    func_append delfiles " $output"
 	    func_to_tool_file "$output"
 	    output=$func_to_tool_file_result
-	  elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
-	    output=$output_objdir/$output_la.lnk
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
 	    func_verbose "creating linker input file list: $output"
 	    : > $output
 	    set x $save_libobjs
 	    shift
 	    firstobj=
-	    if test yes = "$compiler_needs_object"; then
+	    if test "$compiler_needs_object" = yes; then
 	      firstobj="$1 "
 	      shift
 	    fi
@@ -9859,7 +8373,7 @@ EOF
 	  else
 	    if test -n "$save_libobjs"; then
 	      func_verbose "creating reloadable object files..."
-	      output=$output_objdir/$output_la-$k.$objext
+	      output=$output_objdir/$output_la-${k}.$objext
 	      eval test_cmds=\"$reload_cmds\"
 	      func_len " $test_cmds"
 	      len0=$func_len_result
@@ -9871,13 +8385,13 @@ EOF
 		func_len " $obj"
 		func_arith $len + $func_len_result
 		len=$func_arith_result
-		if test -z "$objlist" ||
+		if test "X$objlist" = X ||
 		   test "$len" -lt "$max_cmd_len"; then
 		  func_append objlist " $obj"
 		else
 		  # The command $test_cmds is almost too long, add a
 		  # command to the queue.
-		  if test 1 -eq "$k"; then
+		  if test "$k" -eq 1 ; then
 		    # The first file doesn't have a previous command to add.
 		    reload_objs=$objlist
 		    eval concat_cmds=\"$reload_cmds\"
@@ -9887,10 +8401,10 @@ EOF
 		    reload_objs="$objlist $last_robj"
 		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
 		  fi
-		  last_robj=$output_objdir/$output_la-$k.$objext
+		  last_robj=$output_objdir/$output_la-${k}.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
-		  output=$output_objdir/$output_la-$k.$objext
+		  output=$output_objdir/$output_la-${k}.$objext
 		  objlist=" $obj"
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
@@ -9902,9 +8416,9 @@ EOF
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      reload_objs="$objlist $last_robj"
-	      eval concat_cmds=\"\$concat_cmds$reload_cmds\"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
 	      if test -n "$last_robj"; then
-	        eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
 	      fi
 	      func_append delfiles " $output"
 
@@ -9912,9 +8426,9 @@ EOF
 	      output=
 	    fi
 
-	    ${skipped_export-false} && {
-	      func_verbose "generating symbol list for '$libname.la'"
-	      export_symbols=$output_objdir/$libname.exp
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
 	      $opt_dry_run || $RM $export_symbols
 	      libobjs=$output
 	      # Append the command to create the export file.
@@ -9923,16 +8437,16 @@ EOF
 	      if test -n "$last_robj"; then
 		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
-	    }
+	    fi
 
 	    test -n "$save_libobjs" &&
 	      func_verbose "creating a temporary reloadable object file: $output"
 
 	    # Loop through the commands generated above and execute them.
-	    save_ifs=$IFS; IFS='~'
+	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $concat_cmds; do
-	      IFS=$save_ifs
-	      $opt_quiet || {
+	      IFS="$save_ifs"
+	      $opt_silent || {
 		  func_quote_for_expand "$cmd"
 		  eval "func_echo $func_quote_for_expand_result"
 	      }
@@ -9940,7 +8454,7 @@ EOF
 		lt_exit=$?
 
 		# Restore the uninstalled library and exit
-		if test relink = "$opt_mode"; then
+		if test "$opt_mode" = relink; then
 		  ( cd "$output_objdir" && \
 		    $RM "${realname}T" && \
 		    $MV "${realname}U" "$realname" )
@@ -9949,7 +8463,7 @@ EOF
 		exit $lt_exit
 	      }
 	    done
-	    IFS=$save_ifs
+	    IFS="$save_ifs"
 
 	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
@@ -9957,18 +8471,18 @@ EOF
 	    fi
 	  fi
 
-          ${skipped_export-false} && {
+          if ${skipped_export-false}; then
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	      tmp_export_symbols=$export_symbols
-	      test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
 	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
 	      # The given exports_symbols file has to be filtered, so filter it.
-	      func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
 	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	      # 's' commands, which not all seds can handle. GNU sed should be fine
+	      # 's' commands which not all seds can handle. GNU sed should be fine
 	      # though. Also, the filter scales superlinearly with the number of
 	      # global variables. join(1) would be nice here, but unfortunately
 	      # isn't a blessed tool.
@@ -9977,7 +8491,7 @@ EOF
 	      export_symbols=$output_objdir/$libname.def
 	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	    fi
-	  }
+	  fi
 
 	  libobjs=$output
 	  # Restore the value of output.
@@ -9991,7 +8505,7 @@ EOF
 	  # value of $libobjs for piecewise linking.
 
 	  # Do each of the archive commands.
-	  if test yes = "$module" && test -n "$module_cmds"; then
+	  if test "$module" = yes && test -n "$module_cmds" ; then
 	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	      cmds=$module_expsym_cmds
 	    else
@@ -10013,7 +8527,7 @@ EOF
 
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
-	  gentop=$output_objdir/${outputname}x
+	  gentop="$output_objdir/${outputname}x"
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
@@ -10021,12 +8535,11 @@ EOF
 	  test "X$libobjs" = "X " && libobjs=
 	fi
 
-	save_ifs=$IFS; IFS='~'
+	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
-	  IFS=$sp$nl
+	  IFS="$save_ifs"
 	  eval cmd=\"$cmd\"
-	  IFS=$save_ifs
-	  $opt_quiet || {
+	  $opt_silent || {
 	    func_quote_for_expand "$cmd"
 	    eval "func_echo $func_quote_for_expand_result"
 	  }
@@ -10034,7 +8547,7 @@ EOF
 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
-	    if test relink = "$opt_mode"; then
+	    if test "$opt_mode" = relink; then
 	      ( cd "$output_objdir" && \
 	        $RM "${realname}T" && \
 		$MV "${realname}U" "$realname" )
@@ -10043,10 +8556,10 @@ EOF
 	    exit $lt_exit
 	  }
 	done
-	IFS=$save_ifs
+	IFS="$save_ifs"
 
 	# Restore the uninstalled library and exit
-	if test relink = "$opt_mode"; then
+	if test "$opt_mode" = relink; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 	  if test -n "$convenience"; then
@@ -10066,39 +8579,39 @@ EOF
 	done
 
 	# If -module or -export-dynamic was specified, set the dlname.
-	if test yes = "$module" || test yes = "$export_dynamic"; then
+	if test "$module" = yes || test "$export_dynamic" = yes; then
 	  # On all known operating systems, these are identical.
-	  dlname=$soname
+	  dlname="$soname"
 	fi
       fi
       ;;
 
     obj)
-      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
-	func_warning "'-dlopen' is ignored for objects"
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for objects"
       fi
 
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	func_warning "'-l' and '-L' are ignored for objects" ;;
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
       esac
 
       test -n "$rpath" && \
-	func_warning "'-rpath' is ignored for objects"
+	func_warning "\`-rpath' is ignored for objects"
 
       test -n "$xrpath" && \
-	func_warning "'-R' is ignored for objects"
+	func_warning "\`-R' is ignored for objects"
 
       test -n "$vinfo" && \
-	func_warning "'-version-info' is ignored for objects"
+	func_warning "\`-version-info' is ignored for objects"
 
       test -n "$release" && \
-	func_warning "'-release' is ignored for objects"
+	func_warning "\`-release' is ignored for objects"
 
       case $output in
       *.lo)
 	test -n "$objs$old_deplibs" && \
-	  func_fatal_error "cannot build library object '$output' from non-libtool objects"
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
 
 	libobj=$output
 	func_lo2o "$libobj"
@@ -10106,7 +8619,7 @@ EOF
 	;;
       *)
 	libobj=
-	obj=$output
+	obj="$output"
 	;;
       esac
 
@@ -10119,19 +8632,17 @@ EOF
       # the extraction.
       reload_conv_objs=
       gentop=
-      # if reload_cmds runs $LD directly, get rid of -Wl from
-      # whole_archive_flag_spec and hope we can get by with turning comma
-      # into space.
-      case $reload_cmds in
-        *\$LD[\ \$]*) wl= ;;
-      esac
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
+
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
-	  reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
 	else
-	  gentop=$output_objdir/${obj}x
+	  gentop="$output_objdir/${obj}x"
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $convenience
@@ -10140,12 +8651,12 @@ EOF
       fi
 
       # If we're not building shared, we need to use non_pic_objs
-      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
+      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
 
       # Create the old-style object.
-      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
-      output=$obj
+      output="$obj"
       func_execute_cmds "$reload_cmds" 'exit $?'
 
       # Exit if we aren't doing a library object file.
@@ -10157,7 +8668,7 @@ EOF
 	exit $EXIT_SUCCESS
       fi
 
-      test yes = "$build_libtool_libs" || {
+      if test "$build_libtool_libs" != yes; then
 	if test -n "$gentop"; then
 	  func_show_eval '${RM}r "$gentop"'
 	fi
@@ -10167,12 +8678,12 @@ EOF
 	# $show "echo timestamp > $libobj"
 	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
 	exit $EXIT_SUCCESS
-      }
+      fi
 
-      if test -n "$pic_flag" || test default != "$pic_mode"; then
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
-	output=$libobj
+	output="$libobj"
 	func_execute_cmds "$reload_cmds" 'exit $?'
       fi
 
@@ -10189,14 +8700,16 @@ EOF
 	          output=$func_stripname_result.exe;;
       esac
       test -n "$vinfo" && \
-	func_warning "'-version-info' is ignored for programs"
+	func_warning "\`-version-info' is ignored for programs"
 
       test -n "$release" && \
-	func_warning "'-release' is ignored for programs"
+	func_warning "\`-release' is ignored for programs"
 
-      $preload \
-	&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
-	&& func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
 
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
@@ -10210,11 +8723,11 @@ EOF
       *-*-darwin*)
 	# Don't allow lazy linking, it breaks C++ global constructors
 	# But is supposedly fixed on 10.4 or later (yay!).
-	if test CXX = "$tagname"; then
+	if test "$tagname" = CXX ; then
 	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
 	    10.[0123])
-	      func_append compile_command " $wl-bind_at_load"
-	      func_append finalize_command " $wl-bind_at_load"
+	      func_append compile_command " ${wl}-bind_at_load"
+	      func_append finalize_command " ${wl}-bind_at_load"
 	    ;;
 	  esac
 	fi
@@ -10250,7 +8763,7 @@ EOF
 	*) func_append new_libs " $deplib" ;;
 	esac
       done
-      compile_deplibs=$new_libs
+      compile_deplibs="$new_libs"
 
 
       func_append compile_command " $compile_deplibs"
@@ -10274,7 +8787,7 @@ EOF
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs=$libdir
+	      hardcode_libdirs="$libdir"
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -10297,7 +8810,7 @@ EOF
 	fi
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  ::) dllsearchpath=$libdir;;
@@ -10314,10 +8827,10 @@ EOF
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
-	libdir=$hardcode_libdirs
+	libdir="$hardcode_libdirs"
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
-      compile_rpath=$rpath
+      compile_rpath="$rpath"
 
       rpath=
       hardcode_libdirs=
@@ -10325,7 +8838,7 @@ EOF
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs=$libdir
+	      hardcode_libdirs="$libdir"
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -10350,43 +8863,45 @@ EOF
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
-	libdir=$hardcode_libdirs
+	libdir="$hardcode_libdirs"
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
-      finalize_rpath=$rpath
+      finalize_rpath="$rpath"
 
-      if test -n "$libobjs" && test yes = "$build_old_libs"; then
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
 	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
       fi
 
-      func_generate_dlsyms "$outputname" "@PROGRAM@" false
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
 
       # template prelinking step
       if test -n "$prelink_cmds"; then
 	func_execute_cmds "$prelink_cmds" 'exit $?'
       fi
 
-      wrappers_required=:
+      wrappers_required=yes
       case $host in
       *cegcc* | *mingw32ce*)
         # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
-        wrappers_required=false
+        wrappers_required=no
         ;;
       *cygwin* | *mingw* )
-        test yes = "$build_libtool_libs" || wrappers_required=false
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
         ;;
       *)
-        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
-          wrappers_required=false
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
         fi
         ;;
       esac
-      $wrappers_required || {
+      if test "$wrappers_required" = no; then
 	# Replace the output file specification.
 	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
-	link_command=$compile_command$compile_rpath
+	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
 	exit_status=0
@@ -10399,12 +8914,12 @@ EOF
 	fi
 
 	# Delete the generated files.
-	if test -f "$output_objdir/${outputname}S.$objext"; then
-	  func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
 	fi
 
 	exit $exit_status
-      }
+      fi
 
       if test -n "$compile_shlibpath$finalize_shlibpath"; then
 	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
@@ -10434,9 +8949,9 @@ EOF
 	fi
       fi
 
-      if test yes = "$no_install"; then
+      if test "$no_install" = yes; then
 	# We don't need to create a wrapper script.
-	link_command=$compile_var$compile_command$compile_rpath
+	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
 	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
@@ -10453,28 +8968,27 @@ EOF
 	exit $EXIT_SUCCESS
       fi
 
-      case $hardcode_action,$fast_install in
-        relink,*)
-	  # Fast installation is not supported
-	  link_command=$compile_var$compile_command$compile_rpath
-	  relink_command=$finalize_var$finalize_command$finalize_rpath
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
 
-	  func_warning "this platform does not like uninstalled shared libraries"
-	  func_warning "'$output' will be relinked during installation"
-	  ;;
-        *,yes)
-	  link_command=$finalize_var$compile_command$finalize_rpath
-	  relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
-          ;;
-	*,no)
-	  link_command=$compile_var$compile_command$compile_rpath
-	  relink_command=$finalize_var$finalize_command$finalize_rpath
-          ;;
-	*,needless)
-	  link_command=$finalize_var$compile_command$finalize_rpath
-	  relink_command=
-          ;;
-      esac
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
 
       # Replace the output file specification.
       link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
@@ -10531,8 +9045,8 @@ EOF
 	    func_dirname_and_basename "$output" "" "."
 	    output_name=$func_basename_result
 	    output_path=$func_dirname_result
-	    cwrappersource=$output_path/$objdir/lt-$output_name.c
-	    cwrapper=$output_path/$output_name.exe
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
 	    $RM $cwrappersource $cwrapper
 	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
@@ -10553,7 +9067,7 @@ EOF
 	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
 	    $opt_dry_run || {
 	      # note: this script will not be executed, so do not chmod.
-	      if test "x$build" = "x$host"; then
+	      if test "x$build" = "x$host" ; then
 		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
 	      else
 		func_emit_wrapper no > $func_ltwrapper_scriptname_result
@@ -10576,27 +9090,25 @@ EOF
     # See if we need to build an old-fashioned archive.
     for oldlib in $oldlibs; do
 
-      case $build_libtool_libs in
-        convenience)
-	  oldobjs="$libobjs_save $symfileobj"
-	  addlibs=$convenience
-	  build_libtool_libs=no
-	  ;;
-	module)
-	  oldobjs=$libobjs_save
-	  addlibs=$old_convenience
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save $symfileobj"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
 	  build_libtool_libs=no
-          ;;
-	*)
+	else
 	  oldobjs="$old_deplibs $non_pic_objects"
-	  $preload && test -f "$symfileobj" \
-	    && func_append oldobjs " $symfileobj"
-	  addlibs=$old_convenience
-	  ;;
-      esac
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    func_append oldobjs " $symfileobj"
+	  fi
+	fi
+	addlibs="$old_convenience"
+      fi
 
       if test -n "$addlibs"; then
-	gentop=$output_objdir/${outputname}x
+	gentop="$output_objdir/${outputname}x"
 	func_append generated " $gentop"
 
 	func_extract_archives $gentop $addlibs
@@ -10604,13 +9116,13 @@ EOF
       fi
 
       # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
 	cmds=$old_archive_from_new_cmds
       else
 
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
-	  gentop=$output_objdir/${outputname}x
+	  gentop="$output_objdir/${outputname}x"
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
@@ -10631,7 +9143,7 @@ EOF
 	  :
 	else
 	  echo "copying selected object files to avoid basename conflicts..."
-	  gentop=$output_objdir/${outputname}x
+	  gentop="$output_objdir/${outputname}x"
 	  func_append generated " $gentop"
 	  func_mkdir_p "$gentop"
 	  save_oldobjs=$oldobjs
@@ -10640,7 +9152,7 @@ EOF
 	  for obj in $save_oldobjs
 	  do
 	    func_basename "$obj"
-	    objbase=$func_basename_result
+	    objbase="$func_basename_result"
 	    case " $oldobjs " in
 	    " ") oldobjs=$obj ;;
 	    *[\ /]"$objbase "*)
@@ -10709,18 +9221,18 @@ EOF
 	    else
 	      # the above command should be used before it gets too long
 	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj"; then
+	      if test "$obj" = "$last_oldobj" ; then
 		RANLIB=$save_RANLIB
 	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 	      objlist=
 	      len=$len0
 	    fi
 	  done
 	  RANLIB=$save_RANLIB
 	  oldobjs=$objlist
-	  if test -z "$oldobjs"; then
+	  if test "X$oldobjs" = "X" ; then
 	    eval cmds=\"\$concat_cmds\"
 	  else
 	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
@@ -10737,7 +9249,7 @@ EOF
     case $output in
     *.la)
       old_library=
-      test yes = "$build_old_libs" && old_library=$libname.$libext
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
       func_verbose "creating $output"
 
       # Preserve any variables that may affect compiler behavior
@@ -10752,31 +9264,31 @@ EOF
 	fi
       done
       # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
       relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-      if test yes = "$hardcode_automatic"; then
+      if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
 
       # Only create the output if not a dry run.
       $opt_dry_run || {
 	for installed in no yes; do
-	  if test yes = "$installed"; then
+	  if test "$installed" = yes; then
 	    if test -z "$install_libdir"; then
 	      break
 	    fi
-	    output=$output_objdir/${outputname}i
+	    output="$output_objdir/$outputname"i
 	    # Replace all uninstalled libtool libraries with the installed ones
 	    newdependency_libs=
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      *.la)
 		func_basename "$deplib"
-		name=$func_basename_result
+		name="$func_basename_result"
 		func_resolve_sysroot "$deplib"
-		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
 		test -z "$libdir" && \
-		  func_fatal_error "'$deplib' is not a valid libtool archive"
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
 		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      -L*)
@@ -10792,23 +9304,23 @@ EOF
 	      *) func_append newdependency_libs " $deplib" ;;
 	      esac
 	    done
-	    dependency_libs=$newdependency_libs
+	    dependency_libs="$newdependency_libs"
 	    newdlfiles=
 
 	    for lib in $dlfiles; do
 	      case $lib in
 	      *.la)
 	        func_basename "$lib"
-		name=$func_basename_result
-		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
-		  func_fatal_error "'$lib' is not a valid libtool archive"
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
 		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      *) func_append newdlfiles " $lib" ;;
 	      esac
 	    done
-	    dlfiles=$newdlfiles
+	    dlfiles="$newdlfiles"
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      case $lib in
@@ -10818,34 +9330,34 @@ EOF
 		# didn't already link the preopened objects directly into
 		# the library:
 		func_basename "$lib"
-		name=$func_basename_result
-		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
-		  func_fatal_error "'$lib' is not a valid libtool archive"
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
 		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      esac
 	    done
-	    dlprefiles=$newdlprefiles
+	    dlprefiles="$newdlprefiles"
 	  else
 	    newdlfiles=
 	    for lib in $dlfiles; do
 	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      func_append newdlfiles " $abs"
 	    done
-	    dlfiles=$newdlfiles
+	    dlfiles="$newdlfiles"
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      func_append newdlprefiles " $abs"
 	    done
-	    dlprefiles=$newdlprefiles
+	    dlprefiles="$newdlprefiles"
 	  fi
 	  $RM $output
 	  # place dlname in correct position for cygwin
@@ -10861,9 +9373,10 @@ EOF
 	  case $host,$output,$installed,$module,$dlname in
 	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
 	      # If a -bindir argument was supplied, place the dll there.
-	      if test -n "$bindir"; then
+	      if test "x$bindir" != x ;
+	      then
 		func_relative_path "$install_libdir" "$bindir"
-		tdlname=$func_relative_path_result/$dlname
+		tdlname=$func_relative_path_result$dlname
 	      else
 		# Otherwise fall back on heuristic.
 		tdlname=../bin/$dlname
@@ -10872,7 +9385,7 @@ EOF
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -10886,7 +9399,7 @@ library_names='$library_names'
 # The name of the static archive.
 old_library='$old_library'
 
-# Linker flags that cannot go in dependency_libs.
+# Linker flags that can not go in dependency_libs.
 inherited_linker_flags='$new_inherited_linker_flags'
 
 # Libraries that this one depends upon.
@@ -10912,7 +9425,7 @@ dlpreopen='$dlprefiles'
 
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
-	  if test no,yes = "$installed,$need_relink"; then
+	  if test "$installed" = no && test "$need_relink" = yes; then
 	    $ECHO >> $output "\
 relink_command=\"$relink_command\""
 	  fi
@@ -10927,29 +9440,27 @@ relink_command=\"$relink_command\""
     exit $EXIT_SUCCESS
 }
 
-if test link = "$opt_mode" || test relink = "$opt_mode"; then
-  func_mode_link ${1+"$@"}
-fi
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+    func_mode_link ${1+"$@"}
 
 
 # func_mode_uninstall arg...
 func_mode_uninstall ()
 {
-    $debug_cmd
-
-    RM=$nonopt
+    $opt_debug
+    RM="$nonopt"
     files=
-    rmforce=false
+    rmforce=
     exit_status=0
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
-    libtool_install_magic=$magic
+    libtool_install_magic="$magic"
 
     for arg
     do
       case $arg in
-      -f) func_append RM " $arg"; rmforce=: ;;
+      -f) func_append RM " $arg"; rmforce=yes ;;
       -*) func_append RM " $arg" ;;
       *) func_append files " $arg" ;;
       esac
@@ -10962,18 +9473,18 @@ func_mode_uninstall ()
 
     for file in $files; do
       func_dirname "$file" "" "."
-      dir=$func_dirname_result
-      if test . = "$dir"; then
-	odir=$objdir
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
+	odir="$objdir"
       else
-	odir=$dir/$objdir
+	odir="$dir/$objdir"
       fi
       func_basename "$file"
-      name=$func_basename_result
-      test uninstall = "$opt_mode" && odir=$dir
+      name="$func_basename_result"
+      test "$opt_mode" = uninstall && odir="$dir"
 
       # Remember odir for removal later, being careful to avoid duplicates
-      if test clean = "$opt_mode"; then
+      if test "$opt_mode" = clean; then
 	case " $rmdirs " in
 	  *" $odir "*) ;;
 	  *) func_append rmdirs " $odir" ;;
@@ -10988,11 +9499,11 @@ func_mode_uninstall ()
       elif test -d "$file"; then
 	exit_status=1
 	continue
-      elif $rmforce; then
+      elif test "$rmforce" = yes; then
 	continue
       fi
 
-      rmfiles=$file
+      rmfiles="$file"
 
       case $name in
       *.la)
@@ -11006,7 +9517,7 @@ func_mode_uninstall ()
 	  done
 	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
 
-	  case $opt_mode in
+	  case "$opt_mode" in
 	  clean)
 	    case " $library_names " in
 	    *" $dlname "*) ;;
@@ -11017,12 +9528,12 @@ func_mode_uninstall ()
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
@@ -11038,19 +9549,21 @@ func_mode_uninstall ()
 	  func_source $dir/$name
 
 	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" && test none != "$pic_object"; then
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
 	    func_append rmfiles " $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" && test none != "$non_pic_object"; then
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
 	    func_append rmfiles " $dir/$non_pic_object"
 	  fi
 	fi
 	;;
 
       *)
-	if test clean = "$opt_mode"; then
+	if test "$opt_mode" = clean ; then
 	  noexename=$name
 	  case $file in
 	  *.exe)
@@ -11077,12 +9590,12 @@ func_mode_uninstall ()
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
-	    func_append rmfiles " $odir/$name $odir/${name}S.$objext"
-	    if test yes = "$fast_install" && test -n "$relink_command"; then
+	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
 	      func_append rmfiles " $odir/lt-$name"
 	    fi
-	    if test "X$noexename" != "X$name"; then
-	      func_append rmfiles " $odir/lt-$noexename.c"
+	    if test "X$noexename" != "X$name" ; then
+	      func_append rmfiles " $odir/lt-${noexename}.c"
 	    fi
 	  fi
 	fi
@@ -11091,7 +9604,7 @@ func_mode_uninstall ()
       func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
 
-    # Try to remove the $objdir's in the directories where we deleted files
+    # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
       if test -d "$dir"; then
 	func_show_eval "rmdir $dir >/dev/null 2>&1"
@@ -11101,17 +9614,16 @@ func_mode_uninstall ()
     exit $exit_status
 }
 
-if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
-  func_mode_uninstall ${1+"$@"}
-fi
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
 
 test -z "$opt_mode" && {
-  help=$generic_help
+  help="$generic_help"
   func_fatal_help "you must specify a MODE"
 }
 
 test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode '$opt_mode'"
+  func_fatal_help "invalid operation mode \`$opt_mode'"
 
 if test -n "$exec_cmd"; then
   eval exec "$exec_cmd"
@@ -11122,7 +9634,7 @@ exit $exit_status
 
 
 # The TAGs below are defined such that we never get into a situation
-# where we disable both kinds of libraries.  Given conflicting
+# in which we disable both kinds of libraries.  Given conflicting
 # choices, we go for a static library, that is the most portable,
 # since we can't tell whether shared libraries were disabled because
 # the user asked for that or because the platform doesn't support
@@ -11145,3 +9657,5 @@ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
 # mode:shell-script
 # sh-indentation:2
 # End:
+# vi:sw=2
+