[svn-r27038] Merge of r26393-27031 from the trunk.

Tested on 64-bit linux VM w/ C++ and Fortran 2003

4 files changed, 140 insertions, 20 deletions

diff --git a/bin/cmakehdf5 b/bin/cmakehdf5
index c092545..715d6d7 100755
--- a/bin/cmakehdf5
+++ b/bin/cmakehdf5
@@ -23,6 +23,7 @@ makelog="#${progname}_2build.log"
 testlog="#${progname}_3test.log"
 packlog="#${progname}_4pack.log"
 installlog="#${progname}_5install.log"
+config_summary=libhdf5.settings
 exit_code=0
 
 # This command should be in the source directory's bin/
@@ -45,9 +46,13 @@ fi
 cacheinit=$srcdir/config/cmake/cacheinit.cmake
 build_cpp_lib=-DHDF5_BUILD_CPP_LIB:BOOL=OFF	# C++ interface default off
 build_fortran=-DHDF5_BUILD_FORTRAN:BOOL=OFF	# Fortran interface default off
+enable_f2003=-DHDF5_ENABLE_F2003:BOOL=OFF	# Fortran2003 interface default off
 build_hl_lib=-DHDF5_BUILD_HL_LIB:BOOL=ON	# High Level interface default on
 build_testing=-DBUILD_TESTING:BOOL=ON		# Build tests default on
 build_tools=-DHDF5_BUILD_TOOLS:BOOL=ON		# Build tools default on
+with_zlib=-DHDF5_ENABLE_Z_LIB_SUPPORT=ON	# enable zlib filter default on
+with_szlib=-DHDF5_ENABLE_SZIP_SUPPORT=OFF	# enables zlib filter default off
+shared_lib=-DBUILD_SHARED_LIBS:BOOL=ON		# enables shared lib; default on
 
 
 #=============
@@ -71,14 +76,20 @@ Usage: $progname [<options>]
   where options are:
   --enable-fortran | --disable-fortran:
     enable or disable fortran API. Default is off.
+  --enable-fortran2003 | --disable-fortran2003:
+    enable or disable fortran2003 API. Default is off.
   --enable-cxx | --disable-cxx:
     enable or disable c++ API. Default is off.
   --enable-hl | --disable-hl:
     enable or disable high level API. Default is on.
+  --enable-shared | --disable-shared:
+    enable or disable shared lib. Default is on.
   --enable-tools | --disable-tools:
     enable or disable building tools. Default is on.
   --enable-testing | --disable-testing:
     enable or disable building tests. Default is on.
+  --with-zlib | --without-zlib:
+    Use zlib library for external deflate I/O filter. Default is on.
   --help: shows details help page
 EOF
 }
@@ -106,7 +117,7 @@ STEP()
     (TIMESTAMP; nerror=0 ;
 	echo "eval $command"
 	eval $command || nerror=1 ;
-	TIMESTAMP; exit $nerror) < /dev/null >> "$logfile" 2>&1
+	TIMESTAMP; exit $nerror) < /dev/null > "$logfile" 2>&1
     if [ $? -ne 0 ]; then
 	echo "error in '$banner'.  $progname aborted."
 	exit 1
@@ -114,6 +125,40 @@ STEP()
 }
 
 
+# Install the generated installation image file.  Different platform uses
+# different image files.
+# Linux: HDF5-<version>-Linux.sh file
+# Mac OS X: Not implemented yet
+# Others: Not implemented yet
+INSTALL_HDF5()
+{
+    myos="`uname -s`"
+    case "$myos" in
+	Linux)
+	    install_file=./HDF5-${version}-Linux.sh
+	    $install_file  --skip-license $*
+	    ;;
+	Darwin)		# Mac OSX DMG file
+	    install_file=HDF5-${version}-Darwin.dmg
+	    test -d hdf5 || mkdir hdf5
+	    basename=`basename $install_file .dmg`
+	    # mount the DMG file as /Volumes/$basename
+	    # echo 'Y' as yes for license.
+	    echo Y | hdiutil mount $install_file
+	    # copy the contents to the install location
+	    cp -R "/Volumes/$basename/HDF_Group" hdf5
+	    # unmount the DMG file
+	    hdiutil unmount /Volumes/$basename
+	    ;;
+	*) 		# unknown/unsupported OS.
+	    echo "INSTALL_HDF5: Error--unknown/unsupported OS($myos)"
+	    return 1
+	    ;;
+    esac
+    return 0
+}
+
+
 #==========
 # main
 #==========
@@ -137,6 +182,12 @@ while [ $# -gt 0 ]; do
 	--disable-fortran)
 	    build_fortran=-DHDF5_BUILD_FORTRAN:BOOL=OFF
 	    ;;
+	--enable-fortran2003)
+	    enable_f2003=-DHDF5_ENABLE_F2003:BOOL=ON
+	    ;;
+	--disable-fortran2003)
+	    enable_f2003=-DHDF5_ENABLE_F2003:BOOL=OFF
+	    ;;
 	--enable-cxx)
 	    build_cpp_lib=-DHDF5_BUILD_CPP_LIB:BOOL=ON
 	    ;;
@@ -149,6 +200,12 @@ while [ $# -gt 0 ]; do
 	--disable-hl)
 	    build_hl_lib=-DHDF5_BUILD_HL_LIB:BOOL=OFF
 	    ;;
+	--enable-shared)
+	    shared_lib=-DBUILD_SHARED_LIBS:BOOL=ON
+	    ;;
+	--disable-shared)
+	    shared_lib=-DBUILD_SHARED_LIBS:BOOL=OFF
+	    ;;
 	--enable-tools)
 	    build_tools=-DHDF5_BUILD_TOOLS:BOOL=ON
 	    ;;
@@ -161,14 +218,21 @@ while [ $# -gt 0 ]; do
 	--disable-testing)
 	    build_testing=-DBUILD_TESTING:BOOL=OFF
 	    ;;
+	--with-zlib)
+	    with_zlib=-DHDF5_ENABLE_Z_LIB_SUPPORT:BOOL=ON
+	    ;;
+	--without-zlib)
+	    with_zlib=-DHDF5_ENABLE_Z_LIB_SUPPORT:BOOL=OFF
+	    ;;
 	--help)
 	    # print the detail help page and exit
 	    HELP
 	    exit 0
 	    ;;
 	*)
-	    echo "Unknown options"
+	    echo "Unknown options: $1"
 	    HELP
+	    exit 1
 	    ;;
     esac
     shift
@@ -194,16 +258,22 @@ if [ $? != 0 ]; then
     echo $vers failed. Aborted.
     exit 1
 fi
-echo Running Cmake for HDF5-${version} ...
-
+echo Running Cmake for HDF5-${version} ...  
 #      4. Configure the C library, tools and tests with this command:
+#         If successful, append the configure summary to the configure logfile.
 STEP "Configure..." "cmake \
+    -C $cacheinit \
     $build_cpp_lib \
     $build_fortran \
+    $enable_f2003 \
     $build_hl_lib \
+    $shared_lib \
     $build_testing \
     $build_tools \
-    $srcdir" $configlog
+    $with_zlib \
+    $with_szlib \
+    $srcdir" $configlog &&\
+    cat $config_summary >> $configlog
       
 #      5. Build the C library, tools and tests with this command:
 STEP "Build the library, tools and tests, ..." "cmake --build . --config Release" $makelog
@@ -215,7 +285,8 @@ STEP "Test the library and tools..." "ctest . -C Release" $testlog
 STEP "Create an install image..." "cpack -C Release CPackConfig.cmake" $packlog
       
 #      8. Install with this command:
-STEP "Install..." "./HDF5-${version}-Linux.sh --skip-license" $installlog
+#STEP "Install..." "./HDF5-${version}-Linux.sh --skip-license" $installlog
+STEP "Install..." "INSTALL_HDF5" $installlog
 # save the last exit code
 exit_code=$?
 
diff --git a/bin/h5vers b/bin/h5vers
index cb4b9e0..2aa8023 100755
--- a/bin/h5vers
+++ b/bin/h5vers
@@ -187,6 +187,10 @@ die "unable to read file: $RELEASE\n" unless -r $file;
 my $CONFIGURE = $file;
 $CONFIGURE =~ s/[^\/]*$/..\/configure.ac/;
 die "unable to read file: $CONFIGURE\n" unless -r $file;
+# cpp_doc_config
+my $CPP_DOC_CONFIG = $file;
+$CPP_DOC_CONFIG =~ s/[^\/]*$/..\/c++\/src\/cpp_doc_config/;
+die "unable to read file: $CPP_DOC_CONFIG\n"  unless -r $file;
 
 # Get the current version number.
 open FILE, $file or die "unable to open $file: $!\n";
@@ -234,7 +238,8 @@ if ($set) {
   $README = "";
   $RELEASE = "";
   $CONFIGURE = "";
-  $LT_VERS = "";
+  $CPP_DOC_CONFIG = "";
+  $LT_VERS = "";        
   @newver = @curver;
 }
 
@@ -309,6 +314,46 @@ if ($RELEASE) {
   close FILE;
 }
 
+# Update the c++/src/cpp_doc_config file
+if ($CPP_DOC_CONFIG) {
+  my $data = read_file($CPP_DOC_CONFIG);
+  my $version_string = sprintf("HDF5 version %d.%d.%d%s %s",
+                               @newver[0,1,2],
+                               $newver[3] eq "" ? "" : "-".$newver[3],
+                               "currently under development");
+
+  $data =~ s/PROJECT_NUMBER\s*=.*/PROJECT_NUMBER         = $version_string/;
+
+  write_file($CPP_DOC_CONFIG, $data);  
+}
+
+# helper function to read the file for updating c++/src/cpp_doc_config file.
+# The version string in that file is not at the top, so the string replacement
+# is not for the first line, and reading/writing the entire file as one string
+# facilitates the substring replacement.
+sub read_file {
+   my ($filename) = @_;
+
+    open my $in, $filename or die "Could not open '$filename' for reading $!";
+    local $/ = undef;
+    my $all = <$in>;
+    close $in;
+
+    return $all;
+}
+
+# helper function to write the file for updating c++/src/cpp_doc_config file.
+sub write_file {
+    my ($filename, $content) = @_;
+
+    open my $out, ">$filename" or die "Could not open '$filename' for writing $!";;
+    print $out $content;
+    close $out;
+
+    return;
+}
+
+
 sub gen_configure {
   my ($name, $conf) = @_;
 
diff --git a/bin/release b/bin/release
index d771db6..703916b 100755
--- a/bin/release
+++ b/bin/release
@@ -50,31 +50,33 @@ Usage: $0 -d <dir> [-h] [--nocheck] [--private] <methods> ...
 This must be run at the top level of the source directory.
 The other command-line options are the names of the programs to use
 for compressing the resulting tar archive (if none are given then
-"tar md5" is assumed):
+"tar" is assumed):
 
     tar		-- use tar and don't do any compressing.
     gzip	-- use gzip with "-9" and append ".gz" to the output name.
     bzip2       -- use bzip2 with "-9" and append ".bz2" to the output name.
     zip		-- convert all text files to DOS style and form a zip file for Windows use.
-    md5         -- produce a md5 checksum in addition to the archive.
     doc         -- produce the latest doc tree in addition to the archive.
 
+An md5 checksum is produced for each archive created and stored in the md5 file.
+
 Examples:
 
     $ bin/release -d /tmp
     /tmp/hdf5-1.8.13-RELEASE.txt
+    /tmp/hdf5-1.8.13.md5
     /tmp/hdf5-1.8.13.tar
-    /tmp/hdf5-1.8.13.tar.md5
 
     $ bin/release -d /tmp gzip
     /tmp/hdf5-1.8.13-RELEASE.txt
+    /tmp/hdf5-1.8.13.md5
     /tmp/hdf5-1.8.13.tar.gz
 
-    $ bin/release -d /tmp tar gzip zip md5
+    $ bin/release -d /tmp tar gzip zip
     /tmp/hdf5-1.8.13-RELEASE.txt
+    /tmp/hdf5-1.8.13.md5
     /tmp/hdf5-1.8.13.tar
     /tmp/hdf5-1.8.13.tar.gz
-    /tmp/hdf5-1.8.13.tar.md5
     /tmp/hdf5-1.8.13.tar.zip
 
 EOF
@@ -212,9 +214,9 @@ while [ -n "$1" ]; do
     esac
 done
 
-# Default methods are tar and md5
+# Default method is tar
 if [ "X$methods" = "X" ]; then
-    methods="tar md5"
+    methods="tar"
 fi
 
 # Create the temporay work directory.
@@ -289,26 +291,28 @@ test "$verbose" && echo "   Running tar..." 1>&2
 )
 
 # Compress
+MD5file=$HDF5_VERS.md5
+cp /dev/null $DEST/$MD5file
 for comp in $methods; do
     case $comp in
 	tar)
 	    cp -p $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.tar
+	    (cd $DEST; md5sum $HDF5_VERS.tar >> $MD5file) 
 	    ;;
 	gzip)
 	    test "$verbose" && echo "   Running gzip..." 1>&2
 	    gzip -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.gz
+	    (cd $DEST; md5sum $HDF5_VERS.tar.gz >> $MD5file) 
 	    ;;
 	bzip2)
 	    test "$verbose" && echo "   Running bzip2..." 1>&2
 	    bzip2 -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.bz2
+	    (cd $DEST; md5sum $HDF5_VERS.tar.bz2 >> $MD5file) 
 	    ;;
 	zip)
 	    test "$verbose" && echo "   Creating zip ball..." 1>&2
 	    tar2zip $HDF5_VERS $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.zip 1>&2
-	    ;;
-	md5)
-	    test "$verbose" && echo "   Creating checksum..." 1>&2
-	    (cd $tmpdir; md5sum $HDF5_VERS.tar ) > $DEST/$HDF5_VERS.tar.md5
+	    (cd $DEST; md5sum $HDF5_VERS.zip >> $MD5file) 
 	    ;;
 	doc)
 	    test "$verbose" && echo "   Creating docs..." 1>&2
diff --git a/bin/snapshot b/bin/snapshot
index b4adf5e..a496edd 100755
--- a/bin/snapshot
+++ b/bin/snapshot
@@ -67,8 +67,8 @@ ReleaseDir_default=release_dir
 ZLIB_default=
 ZLIB=$ZLIB_default
 
-# What compression methods to use? (md5 does checksum).
-METHODS="gzip zip bzip2 md5 doc"
+# What compression methods to use? 
+METHODS="gzip zip bzip2 doc"
 
 # Use User's MAKE if set.  Else use generic make.
 MAKE=${MAKE:-make}