[svn-r15881] Purpose: Bug Fixes, Libtool Upgrade

Description:

  1) configure now sets LD_LIBRARY_PATH before checking for presence of 
     SZIP encoder, so user does not need to set this. The path is then
     saved and sent to Makefiles, and used when "make check-install" is
     invoked, so user doesn't need to set this manually. 

  2) Upgraded libtool to version 2.2.6a

  3) Rearranged tools build order as h5dump depends on existence of h5diff
     and h5import. Since h5dump is a sister directory as opposed to a parent
     of either, it doesn't know about the build rules of these tools, so 
     setting any sort of explicit dependency confuses automake as it won't
     know how to build the tools. Instead, setting CONFIG = ordered forces
     an in-order traversal of each tools subdirectory. (without it will also
     traverse in order by default, but this should prevent gmake's -j option
     from jumping ahead as well). 'make check install' should now be able to 
     be invoked after 'configure' without causing a dependency failure.

  4) Removed H5_HAVE_LARGE_HSIZET macro from vms/src/h5pubconf.h, as this macro
     has now been out of the code for some time. (vms pubconf needs to be 
     updated manually, which is why it was still hanging around).

Tested: kagiso, smirom, liberty

Note: h5diff looks to be causing failures in h5copy and h5dump tools tests,
      though these were present before any of my changes. My changes only 
      affect build order and configuration setup, and shouldn't prevent
      fixes for these failures coming in after this checkin. Other than these,
      tests pass fine.

2 files changed, 1409 insertions, 811 deletions

diff --git a/bin/ltmain.sh b/bin/ltmain.sh
index a8b3f1c..b36c4ad 100644
--- a/bin/ltmain.sh
+++ b/bin/ltmain.sh
@@ -1,6 +1,6 @@
 # Generated from ltmain.m4sh.
 
-# ltmain.sh (GNU libtool) 2.2.2
+# ltmain.sh (GNU libtool) 2.2.6
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
@@ -65,7 +65,7 @@
 #       compiler:		$LTCC
 #       compiler flags:		$LTCFLAGS
 #       linker:		$LD (gnu? $with_gnu_ld)
-#       $progname:		(GNU libtool) 2.2.2
+#       $progname:		(GNU libtool) 2.2.6
 #       automake:		$automake_version
 #       autoconf:		$autoconf_version
 #
@@ -73,9 +73,9 @@
 
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=2.2.2
+VERSION=2.2.6
 TIMESTAMP=""
-package_revision=1.2627
+package_revision=1.3012
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -144,6 +144,32 @@ IFS=" 	$lt_nl"
 dirname="s,/[^/]*$,,"
 basename="s,^.*/,,"
 
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# Generated shell functions inserted here.
+
 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 # is ksh but when the shell is invoked as "sh" and the current value of
 # the _XPG environment variable is not equal to 1 (one), the special
@@ -154,13 +180,17 @@ progpath="$0"
 # The name of this program:
 # In the unlikely event $progname began with a '-', it would play havoc with
 # func_echo (imagine progname=-n), so we prepend ./ in that case:
-progname=`$ECHO "X$progpath" | $Xsed -e "$basename" -e 's,^-,./-,'`
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+  -*) progname=./$progname ;;
+esac
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
   [\\/]*|[A-Za-z]:\\*) ;;
   *[\\/]*)
-     progdir=`$ECHO "X$progpath" | $Xsed -e "$dirname"`
+     progdir=$func_dirname_result
      progdir=`cd "$progdir" && pwd`
      progpath="$progdir/$progname"
      ;;
@@ -206,6 +236,7 @@ opt_dry_run=false
 opt_help=false
 opt_quiet=false
 opt_verbose=false
+opt_warning=:
 
 # func_echo arg...
 # Echo program name prefixed message, along with the current mode
@@ -238,7 +269,10 @@ func_error ()
 # Echo program name prefixed warning message to standard error.
 func_warning ()
 {
-    $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
 }
 
 # func_fatal_error arg...
@@ -658,191 +692,6 @@ func_enable_tag ()
   esac
 }
 
-
-func_mode_help ()
-{
-    # We need to display help for each of the modes.
-    case $mode in
-      "")
-        # Generic help is extracted from the usage comments
-        # at the start of this file.
-        func_help
-        ;;
-
-      clean)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      compile)
-      $ECHO \
-"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -shared           do not build a \`.o' file suitable for static linking
-  -static           only build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-        ;;
-
-      execute)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-        ;;
-
-      finish)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-        ;;
-
-      install)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The following components of INSTALL-COMMAND are treated specially:
-
-  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-        ;;
-
-      link)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -shared           only do dynamic linking of libtool libraries
-  -shrext SUFFIX    override the standard shared library file extension
-  -static           do not do any dynamic linking of uninstalled libtool libraries
-  -static-libtool-libs
-                    do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
-  -weak LIBNAME     declare that the target provides the LIBNAME interface
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-        ;;
-
-      uninstall)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      *)
-        func_fatal_help "invalid operation mode \`$mode'"
-        ;;
-    esac
-
-    $ECHO
-    $ECHO "Try \`$progname --help' for more information about other modes."
-
-    exit $?
-}
-
-# Generated shell functions inserted here.
-
-
 # Parse options once, thoroughly.  This comes as soon as possible in
 # the script to make things like `libtool --version' happen quickly.
 {
@@ -954,11 +803,9 @@ Otherwise, only FILE itself is deleted using RM."
     esac
   done
 
-  # Now that we've collected a possible --mode arg, show help if necessary
-  $opt_help && func_mode_help
 
   case $host in
-    *cygwin* | *mingw* | *pw32*)
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
       # don't eliminate duplications in $postdeps and $predeps
       opt_duplicate_compiler_generated_deps=:
       ;;
@@ -1012,7 +859,7 @@ _LT_EOF
 ##    Main.    ##
 ## ----------- ##
 
-{
+$opt_help || {
   # Sanity checks first:
   func_check_version_match
 
@@ -1046,8 +893,9 @@ _LT_EOF
 # determined imposters.
 func_lalib_p ()
 {
-    $SED -e 4q "$1" 2>/dev/null \
-      | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
 }
 
 # func_lalib_unsafe_p file
@@ -1060,7 +908,7 @@ func_lalib_p ()
 func_lalib_unsafe_p ()
 {
     lalib_p=no
-    if test -r "$1" && exec 5<&0 <"$1"; then
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
 	for lalib_p_l in 1 2 3 4
 	do
 	    read lalib_p_line
@@ -1153,55 +1001,6 @@ func_source ()
 }
 
 
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
-  $opt_debug
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 |
-	$SED -n -e '
-	    1,100{
-		/ I /{
-		    s,.*,import,
-		    p
-		    q
-		}
-	    }'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
-    ;;
-  esac
-  $ECHO "$win32_libid_type"
-}
-
-
-
 # func_infer_tag arg
 # Infer tagged configuration to use if any are available and
 # if one wasn't chosen via the "--tag" command line option.
@@ -1261,365 +1060,6 @@ func_infer_tag ()
 
 
 
-# func_generate_dlsyms outputname originator pic_p
-# Extract symbols from dlprefiles and create ${outputname}S.o with
-# a dlpreopen symbol table.
-func_generate_dlsyms ()
-{
-    $opt_debug
-    my_outputname="$1"
-    my_originator="$2"
-    my_pic_p="${3-no}"
-    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
-    my_dlsyms=
-
-    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-      if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	my_dlsyms="${my_outputname}S.c"
-      else
-	func_error "not configured to extract global symbols from dlpreopened files"
-      fi
-    fi
-
-    if test -n "$my_dlsyms"; then
-      case $my_dlsyms in
-      "") ;;
-      *.c)
-	# Discover the nlist of each of the dlfiles.
-	nlist="$output_objdir/${my_outputname}.nm"
-
-	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
-
-	# Parse the name list into a source file.
-	func_verbose "creating $output_objdir/$my_dlsyms"
-
-	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* External symbol declarations for the compiler. */\
-"
-
-	if test "$dlself" = yes; then
-	  func_verbose "generating symbol list for \`$output'"
-
-	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
-
-	  # Add our own program objects to the symbol list.
-	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	  for progfile in $progfiles; do
-	    func_verbose "extracting global C symbols from \`$progfile'"
-	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -n "$exclude_expsyms"; then
-	    $opt_dry_run || {
-	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	    }
-	  fi
-
-	  if test -n "$export_symbols_regex"; then
-	    $opt_dry_run || {
-	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	    }
-	  fi
-
-	  # Prepare the list of exported symbols
-	  if test -z "$export_symbols"; then
-	    export_symbols="$output_objdir/$outputname.exp"
-	    $opt_dry_run || {
-	      $RM $export_symbols
-	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-	      case $host in
-	      *cygwin* | *mingw* )
-                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-	        ;;
-	      esac
-	    }
-	  else
-	    $opt_dry_run || {
-	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	      case $host in
-	        *cygwin | *mingw* )
-	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-	          ;;
-	      esac
-	    }
-	  fi
-	fi
-
-	for dlprefile in $dlprefiles; do
-	  func_verbose "extracting global C symbols from \`$dlprefile'"
-	  func_basename "$dlprefile"
-	  name="$func_basename_result"
-	  $opt_dry_run || {
-	    eval '$ECHO ": $name " >> "$nlist"'
-	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-	  }
-	done
-
-	$opt_dry_run || {
-	  # Make sure we have at least an empty file.
-	  test -f "$nlist" || : > "$nlist"
-
-	  if test -n "$exclude_expsyms"; then
-	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	    $MV "$nlist"T "$nlist"
-	  fi
-
-	  # Try sorting and uniquifying the output.
-	  if $GREP -v "^: " < "$nlist" |
-	      if sort -k 3 </dev/null >/dev/null 2>&1; then
-		sort -k 3
-	      else
-		sort +2
-	      fi |
-	      uniq > "$nlist"S; then
-	    :
-	  else
-	    $GREP -v "^: " < "$nlist" > "$nlist"S
-	  fi
-
-	  if test -f "$nlist"S; then
-	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
-	  else
-	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
-	  fi
-
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
-
-/* The mapping between symbol names and symbols.  */
-typedef struct {
-  const char *name;
-  void *address;
-} lt_dlsymlist;
-"
-	  case $host in
-	  *cygwin* | *mingw* )
-	    $ECHO >> "$output_objdir/$my_dlsyms" "\
-/* DATA imports from DLLs on WIN32 con't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs.  */"
-	    lt_dlsym_const= ;;
-	  *osf5*)
-	    echo >> "$output_objdir/$my_dlsyms" "\
-/* This system does not cope well with relocations in const data */"
-	    lt_dlsym_const= ;;
-	  *)
-	    lt_dlsym_const=const ;;
-	  esac
-
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
-extern $lt_dlsym_const lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
-$lt_dlsym_const lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
-  { \"$my_originator\", (void *) 0 },"
-
-	  case $need_lib_prefix in
-	  no)
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
-	    ;;
-	  *)
-	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
-	    ;;
-	  esac
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_${my_prefix}_LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	} # !$opt_dry_run
-
-	pic_flag_for_symtable=
-	case "$compile_command " in
-	*" -static "*) ;;
-	*)
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
-	  *-*-hpux*)
-	    pic_flag_for_symtable=" $pic_flag"  ;;
-	  *)
-	    if test "X$my_pic_p" != Xno; then
-	      pic_flag_for_symtable=" $pic_flag"
-	    fi
-	    ;;
-	  esac
-	  ;;
-	esac
-	symtab_cflags=
-	for arg in $LTCFLAGS; do
-	  case $arg in
-	  -pie | -fpie | -fPIE) ;;
-	  *) symtab_cflags="$symtab_cflags $arg" ;;
-	  esac
-	done
-
-	# Now compile the dynamic symbol file.
-	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
-
-	# Clean up the generated files.
-	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
-
-	# Transform the symbol file into the correct name.
-	symfileobj="$output_objdir/${my_outputname}S.$objext"
-	case $host in
-	*cygwin* | *mingw* )
-	  if test -f "$output_objdir/$my_outputname.def"; then
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	  else
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	  fi
-	  ;;
-	*)
-	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	  ;;
-	esac
-	;;
-      *)
-	func_fatal_error "unknown suffix for \`$my_dlsyms'"
-	;;
-      esac
-    else
-      # We keep going just in case the user didn't refer to
-      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-      # really was required.
-
-      # Nullify the symbol file.
-      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-    fi
-}
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    $opt_debug
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
-    fi
-}
-
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
-    $opt_debug
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      func_basename "$my_xlib"
-      my_xlib="$func_basename_result"
-      my_xlib_u=$my_xlib
-      while :; do
-        case " $extracted_archives " in
-	*" $my_xlib_u "*)
-	  extracted_serial=`expr $extracted_serial + 1`
-	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
-	*) break ;;
-	esac
-      done
-      extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
-
-      func_mkdir_p "$my_xdir"
-
-      case $host in
-      *-darwin*)
-	func_verbose "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	$opt_dry_run || {
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`basename "$darwin_archive"`
-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
-	  if test -n "$darwin_arches"; then
-	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      lipo -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    $RM -rf unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd $darwin_orig_dir
-	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	} # !$opt_dry_run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-	;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-
-    func_extract_archives_result="$my_oldobjs"
-}
-
-
-
 # func_write_libtool_object output_name pic_name nonpic_name
 # Create a libtool object file (analogous to a ".la" file),
 # but don't create it if we're doing a dry run.
@@ -1653,7 +1093,7 @@ pic_object=$write_lobj
 non_pic_object=$write_oldobj
 
 EOF
-      mv -f "${write_libobj}T" "${write_libobj}"
+      $MV "${write_libobj}T" "${write_libobj}"
     }
 }
 
@@ -1769,27 +1209,16 @@ func_mode_compile ()
 
     # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
     case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.[fF][09]?) xform='[fF][09].' ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
-    *.obj) xform=obj ;;
-    *.sx) xform=sx ;;
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
     esac
 
-    libobj=`$ECHO "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
     case $libobj in
     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)
@@ -1845,12 +1274,9 @@ func_mode_compile ()
       removelist="$lobj $libobj ${libobj}T"
     fi
 
-    $opt_dry_run || $RM $removelist
-    trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15
-
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
       pic_mode=default
       ;;
     esac
@@ -1864,8 +1290,6 @@ func_mode_compile ()
     if test "$compiler_c_o" = no; then
       output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15
     else
       output_obj=
       need_locks=no
@@ -1895,17 +1319,20 @@ compiler."
 	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
+      removelist="$removelist $output_obj"
       $ECHO "$srcfile" > "$lockfile"
     fi
 
+    $opt_dry_run || $RM $removelist
+    removelist="$removelist $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi
     func_quote_for_eval "$srcfile"
     qsrcfile=$func_quote_for_eval_result
 
-    $opt_dry_run || $RM "$libobj" "${libobj}T"
-
     # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then
       # Without this assignment, base_compile gets emptied.
@@ -1925,8 +1352,6 @@ compiler."
 	command="$command -o $lobj"
       fi
 
-      $opt_dry_run || $RM "$lobj" "$output_obj"
-
       func_show_eval_locale "$command"	\
           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
@@ -1976,7 +1401,6 @@ compiler."
 
       # Suppress compiler output if we already did a PIC compilation.
       command="$command$suppress_output"
-      $opt_dry_run || $RM "$obj" "$output_obj"
       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
@@ -2012,6 +1436,7 @@ compiler."
 
       # Unlock the critical section if it was locked
       if test "$need_locks" != no; then
+	removelist=$lockfile
         $RM "$lockfile"
       fi
     }
@@ -2019,7 +1444,193 @@ compiler."
     exit $EXIT_SUCCESS
 }
 
+$opt_help || {
 test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$mode'"
+        ;;
+    esac
+
+    $ECHO
+    $ECHO "Try \`$progname --help' for more information about other modes."
+
+    exit $?
+}
+
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
 
 
 # func_mode_execute arg...
@@ -2436,7 +2047,7 @@ func_mode_install ()
 	      'exit $?'
 	  tstripme="$stripme"
 	  case $host_os in
-	  cygwin* | mingw* | pw32*)
+	  cygwin* | mingw* | pw32* | cegcc*)
 	    case $realname in
 	    *.dll.a)
 	      tstripme=""
@@ -2542,7 +2153,7 @@ func_mode_install ()
 
 	# Do a test to see if this is really a libtool program.
 	case $host in
-	*cygwin*|*mingw*)
+	*cygwin* | *mingw*)
 	    if func_ltwrapper_executable_p "$file"; then
 	      func_ltwrapper_scriptname "$file"
 	      wrapper=$func_ltwrapper_scriptname_result
@@ -2672,25 +2283,425 @@ func_mode_install ()
 test "$mode" = install && func_mode_install ${1+"$@"}
 
 
-# func_emit_wrapper arg
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_verbose "extracting global C symbols from \`$progfile'"
+	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+	  $opt_dry_run || {
+	    eval '$ECHO ": $name " >> "$nlist"'
+	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	  }
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+"
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* )
+	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs.  */"
+	    lt_dlsym_const= ;;
+	  *osf5*)
+	    echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+	    lt_dlsym_const= ;;
+	  *)
+	    lt_dlsym_const=const ;;
+	  esac
+
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) symtab_cflags="$symtab_cflags $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
 #
-# emit a libtool wrapper script on stdout
-# don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variable
-# set therein.
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+
+# func_emit_wrapper_part1 [arg=no]
 #
-# arg is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the '.lib' directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
 {
-	func_emit_wrapper_arg1=no
+	func_emit_wrapper_part1_arg1=no
 	if test -n "$1" ; then
-	  func_emit_wrapper_arg1=$1
+	  func_emit_wrapper_part1_arg1=$1
 	fi
 
 	$ECHO "\
@@ -2775,10 +2786,27 @@ else
     file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
     file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
   done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+	func_emit_wrapper_part2_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part2_arg1=$1
+	fi
+
+	$ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
@@ -2869,7 +2897,7 @@ else
 "
 	case $host in
 	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
+	*-*-mingw | *-*-os2* | *-cegcc*)
 	  $ECHO "\
       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 "
@@ -2895,7 +2923,207 @@ else
 fi\
 "
 }
-# end: func_emit_wrapper
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_arg1=$1
+	fi
+
+	# split this up so that func_emit_cwrapperexe_src
+	# can call each part independently.
+	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+  func_to_host_path_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        case $build in
+          *mingw* ) # actually, msys
+            # awkward: cmd appends spaces to result
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # Unfortunately, winepath does not exit with a non-zero
+            # error code, so we are forced to check the contents of
+            # stdout. On the other hand, if the command is not
+            # found, the shell will set an exit code of 127 and print
+            # *an error message* to stdout. So we must check for both
+            # error code of zero AND non-empty stdout, which explains
+            # the odd construction:
+            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+                $SED -e "$lt_sed_naive_backslashify"`
+            else
+              # Allow warning below.
+              func_to_host_path_result=""
+            fi
+            ;;
+        esac
+        if test -z "$func_to_host_path_result" ; then
+          func_error "Could not determine host path corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback:
+          func_to_host_path_result="$1"
+        fi
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_path
+
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+  func_to_host_pathlist_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        # Remove leading and trailing path separator characters from
+        # ARG. msys behavior is inconsistent here, cygpath turns them
+        # into '.;' and ';.', and winepath ignores them completely.
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
+        case $build in
+          *mingw* ) # Actually, msys.
+            # Awkward: cmd appends spaces to result.
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # unfortunately, winepath doesn't convert pathlists
+            func_to_host_pathlist_result=""
+            func_to_host_pathlist_oldIFS=$IFS
+            IFS=:
+            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+              IFS=$func_to_host_pathlist_oldIFS
+              if test -n "$func_to_host_pathlist_f" ; then
+                func_to_host_path "$func_to_host_pathlist_f"
+                if test -n "$func_to_host_path_result" ; then
+                  if test -z "$func_to_host_pathlist_result" ; then
+                    func_to_host_pathlist_result="$func_to_host_path_result"
+                  else
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                  fi
+                fi
+              fi
+              IFS=:
+            done
+            IFS=$func_to_host_pathlist_oldIFS
+            ;;
+        esac
+        if test -z "$func_to_host_pathlist_result" ; then
+          func_error "Could not determine the host path(s) corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback. This may break if $1 contains DOS-style drive
+          # specifications. The fix is not to complicate the expression
+          # below, but for the user to provide a working wine installation
+          # with winepath so that path translation in the cross-to-mingw
+          # case works properly.
+          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+        fi
+        # Now, add the leading and trailing path separators back
+        case "$1" in
+          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+            ;;
+        esac
+        case "$1" in
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+            ;;
+        esac
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_pathlist
 
 # func_emit_cwrapperexe_src
 # emit the source code for a wrapper executable on stdout
@@ -2926,9 +3154,19 @@ EOF
 # include <direct.h>
 # include <process.h>
 # include <io.h>
+# define setmode _setmode
 #else
 # include <unistd.h>
 # include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
+# endif
 #endif
 #include <malloc.h>
 #include <stdarg.h>
@@ -3034,29 +3272,105 @@ int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
 void lt_fatal (const char *message, ...);
-
-static const char *script_text =
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+
+static const char *script_text_part1 =
 EOF
 
-	    func_emit_wrapper yes |
+	    func_emit_wrapper_part1 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
+
+static const char *script_text_part2 =
+EOF
+	    func_emit_wrapper_part2 yes |
 	        $SED -e 's/\([\\"]\)/\\\1/g' \
 	             -e 's/^/  "/' -e 's/$/\\n"/'
 	    echo ";"
 
 	    cat <<EOF
 const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_pathlist "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_pathlist "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
+
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
 
 int
 main (int argc, char *argv[])
 {
   char **newargz;
+  int  newargc;
   char *tmp_pathspec;
   char *actual_cwrapper_path;
-  char *shwrapper_name;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
   intptr_t rval = 127;
-  FILE *shwrapper;
 
-  const char *dumpscript_opt = "--lt-dump-script";
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
@@ -3072,42 +3386,18 @@ EOF
 	    case "$host" in
 	      *mingw* | *cygwin* )
 		# make stdout use "unix" line endings
-		echo "          _setmode(1,_O_BINARY);"
+		echo "          setmode(1,_O_BINARY);"
 		;;
 	      esac
 
-	    cat <<EOF
-	  printf ("%s", script_text);
+	    cat <<"EOF"
+	  printf ("%s", script_text_part1);
+	  printf ("%s", script_text_part2);
 	  return 0;
 	}
     }
 
-  newargz = XMALLOC (char *, argc + 2);
-EOF
-
-	    if test -n "$TARGETSHELL" ; then
-	      # no path translation at all
-	      lt_newargv0=$TARGETSHELL
-	    else
-	      case "$host" in
-		*mingw* )
-		  # awkward: cmd appends spaces to result
-		  lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-		  lt_newargv0=`( cmd //c echo $SHELL | $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo $SHELL`
-		  case $lt_newargv0 in
-		    *.exe | *.EXE) ;;
-		    *) lt_newargv0=$lt_newargv0.exe ;;
-		  esac
-		  ;;
-		* ) lt_newargv0=$SHELL ;;
-	      esac
-	    fi
-
-		cat <<EOF
-  newargz[0] = (char *) xstrdup ("$lt_newargv0");
-EOF
-
-	    cat <<"EOF"
+  newargz = XMALLOC (char *, argc + 1);
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
     lt_fatal ("Couldn't find %s", argv[0]);
@@ -3119,39 +3409,60 @@ EOF
 			  actual_cwrapper_path));
   XFREE (tmp_pathspec);
 
-  shwrapper_name = (char *) xstrdup (base_name (actual_cwrapper_path));
-  strendzap (actual_cwrapper_path, shwrapper_name);
-
-  /* shwrapper_name transforms */
-  strendzap (shwrapper_name, ".exe");
-  tmp_pathspec = XMALLOC (char, (strlen (shwrapper_name) +
-				 strlen ("_ltshwrapperTMP") + 1));
-  strcpy (tmp_pathspec, shwrapper_name);
-  strcat (tmp_pathspec, "_ltshwrapperTMP");
-  XFREE (shwrapper_name);
-  shwrapper_name = tmp_pathspec;
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
   tmp_pathspec = 0;
-  LTWRAPPER_DEBUGPRINTF (("(main) libtool shell wrapper name: %s\n",
-			  shwrapper_name));
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+			  target_name));
 EOF
 
 	    cat <<EOF
-  newargz[1] =
+  newargz[0] =
     XMALLOC (char, (strlen (actual_cwrapper_path) +
-		    strlen ("$objdir") + 1 + strlen (shwrapper_name) + 1));
-  strcpy (newargz[1], actual_cwrapper_path);
-  strcat (newargz[1], "$objdir");
-  strcat (newargz[1], "/");
-  strcat (newargz[1], shwrapper_name);
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
 EOF
 
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
 
 	    case $host_os in
 	      mingw*)
 	    cat <<"EOF"
   {
     char* p;
-    while ((p = strchr (newargz[1], '\\')) != NULL)
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
       {
 	*p = '/';
       }
@@ -3161,55 +3472,114 @@ EOF
 	    esac
 
 	    cat <<"EOF"
-  XFREE (shwrapper_name);
+  XFREE (target_name);
   XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
 
-  /* always write in binary mode */
-  if ((shwrapper = fopen (newargz[1], FOPEN_WB)) == 0)
-    {
-      lt_fatal ("Could not open %s for writing", newargz[1]);
-    }
-  fprintf (shwrapper, "%s", script_text);
-  fclose (shwrapper);
-
-  make_executable (newargz[1]);
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
 
+  newargc=0;
   for (i = 1; i < argc; i++)
-    newargz[i + 1] = xstrdup (argv[i]);
-  newargz[argc + 1] = NULL;
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
 
-  for (i = 0; i < argc + 1; i++)
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  for (i = 0; i < newargc; i++)
     {
-      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, newargz[i]));
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
     }
 
 EOF
 
 	    case $host_os in
 	      mingw*)
-		cat <<EOF
+		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
-  rval = _spawnv (_P_WAIT, "$lt_newargv0", (const char * const *) newargz);
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
-      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"$lt_newargv0\": errno = %d\n", errno));
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
       return 127;
     }
   return rval;
-}
 EOF
 		;;
 	      *)
-		cat <<EOF
-  execv ("$lt_newargv0", newargz);
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
   return rval; /* =127, but avoids unused variable warning */
-}
 EOF
 		;;
 	    esac
 
 	    cat <<"EOF"
+}
 
 void *
 xmalloc (size_t num)
@@ -3483,6 +3853,177 @@ lt_fatal (const char *message, ...)
   lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
   va_end (ap);
 }
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+
+  p = strchr (arg, (int)'=');
+
+  if (!p)
+    return 1;
+
+  *value = xstrdup (++p);
+
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+
+  return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+
 EOF
 }
 # end: func_emit_cwrapperexe_src
@@ -3492,7 +4033,7 @@ func_mode_link ()
 {
     $opt_debug
     case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra
@@ -3579,9 +4120,6 @@ func_mode_link ()
 	  fi
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
-	    # See comment for -static flag below, for more details.
-	    func_append compile_command " $link_static_flag"
-	    func_append finalize_command " $link_static_flag"
 	  fi
 	  prefer_static_libs=yes
 	  ;;
@@ -3869,7 +4407,11 @@ func_mode_link ()
 
       case $arg in
       -all-static)
-	# The effects of -all-static are defined in a previous loop.
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
 	continue
 	;;
 
@@ -3935,6 +4477,13 @@ func_mode_link ()
       -L*)
 	func_stripname '-L' '' "$arg"
 	dir=$func_stripname_result
+	if test -z "$dir"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -3953,14 +4502,16 @@ func_mode_link ()
 	  ;;
 	esac
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -3971,7 +4522,7 @@ func_mode_link ()
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -4048,7 +4599,7 @@ func_mode_link ()
 
       -no-install)
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
 	  # and Darwin in order for the loader to find any dlls it needs.
 	  func_warning "\`-no-install' is ignored for $host"
@@ -5005,7 +5556,7 @@ func_mode_link ()
 	if test -n "$library_names" &&
 	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
 	  case $host in
-	  *cygwin* | *mingw*)
+	  *cygwin* | *mingw* | *cegcc*)
 	      # No point in relinking DLLs because paths are not encoded
 	      notinst_deplibs="$notinst_deplibs $lib"
 	      need_relink=no
@@ -5075,8 +5626,9 @@ func_mode_link ()
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw*)
-		major=`expr $current - $age`
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
 		versuffix="-$major"
 		;;
 	      esac
@@ -5368,11 +5920,9 @@ func_mode_link ()
 		    done
 		    if test -f "$absdir/$objdir/$depdepl" ; then
 		      depdepl="$absdir/$objdir/$depdepl"
-		      darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
-		      darwin_install_name=`$ECHO $darwin_install_name`
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                       if test -z "$darwin_install_name"; then
-                          darwin_install_name=`otool64 -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
-                          darwin_install_name=`$ECHO $darwin_install_name`
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
 		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
 		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
@@ -5639,7 +6189,8 @@ func_mode_link ()
 	  #
 	  case $version_type in
 	  darwin|linux|osf|windows|none)
-	    current=`expr $number_major + $number_minor`
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
@@ -5649,7 +6200,8 @@ func_mode_link ()
 	    age="0"
 	    ;;
 	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor`
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_minor"
 	    lt_irix_increment=no
@@ -5703,10 +6255,12 @@ func_mode_link ()
 	darwin)
 	  # Like Linux, but with the current version available in
 	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
 	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
 	  ;;
@@ -5723,10 +6277,11 @@ func_mode_link ()
 
 	irix | nonstopux)
 	  if test "X$lt_irix_increment" = "Xno"; then
-	    major=`expr $current - $age`
+	    func_arith $current - $age
 	  else
-	    major=`expr $current - $age + 1`
+	    func_arith $current - $age + 1
 	  fi
+	  major=$func_arith_result
 
 	  case $version_type in
 	    nonstopux) verstring_prefix=nonstopux ;;
@@ -5737,8 +6292,10 @@ func_mode_link ()
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
 	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
 
@@ -5748,20 +6305,24 @@ func_mode_link ()
 	  ;;
 
 	linux)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  ;;
 
 	osf)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix=".$current.$age.$revision"
 	  verstring="$current.$age.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
 	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring:${iface}.0"
 	  done
 
@@ -5782,7 +6343,8 @@ func_mode_link ()
 	windows)
 	  # Use '-' rather than '.', since we only want one
 	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
+	  func_arith $current - $age
+	  major=$func_arith_result
 	  versuffix="-$major"
 	  ;;
 
@@ -5843,7 +6405,7 @@ func_mode_link ()
 	tempremovelist=`$ECHO "$output_objdir/*"`
 	for p in $tempremovelist; do
 	  case $p in
-	    *.$objext)
+	    *.$objext | *.gcno)
 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
 	       if test "X$precious_files_regex" != "X"; then
@@ -5914,7 +6476,7 @@ func_mode_link ()
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
@@ -5978,9 +6540,10 @@ EOF
 	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-	      if test "$name" != "" && test "$name" != "0"; then
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
@@ -6007,17 +6570,20 @@ EOF
 		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  else
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-	      if test "$name" != "" && test "$name" != "0"; then
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
 		$opt_dry_run || $RM conftest
 		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
@@ -6055,9 +6621,11 @@ EOF
 		  $ECHO "*** library that it depends on before this library will be fully"
 		  $ECHO "*** functional.  Installing it before continuing would be even better."
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  fi
 	  ;;
@@ -6065,9 +6633,10 @@ EOF
 	  set dummy $deplibs_check_method; shift
 	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-	    if test "$name" != "" && test  "$name" != "0"; then
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
@@ -6124,19 +6693,22 @@ EOF
 		  $ECHO "*** using a file magic. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	match_pattern*)
 	  set dummy $deplibs_check_method; shift
 	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
@@ -6175,10 +6747,12 @@ EOF
 		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
@@ -6401,7 +6975,7 @@ EOF
 
 	orig_export_symbols=
 	case $host_os in
-	cygwin* | mingw*)
+	cygwin* | mingw* | cegcc*)
 	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
 	    # exporting using user supplied symfile
 	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
@@ -6430,8 +7004,9 @@ EOF
 	    for cmd in $cmds; do
 	      IFS="$save_ifs"
 	      eval cmd=\"$cmd\"
-	      if len=`expr "X$cmd" : ".*"` &&
-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	      func_len " $cmd"
+	      len=$func_len_result
+	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 		func_show_eval "$cmd" 'exit $?'
 		skipped_export=false
 	      else
@@ -6534,8 +7109,9 @@ EOF
 	fi
 
 	if test "X$skipped_export" != "X:" &&
-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  :
 	else
 	  # The command line is too long to link in one step, link piecewise
@@ -6595,14 +7171,20 @@ EOF
 	    if test -n "$save_libobjs"; then
 	      func_verbose "creating reloadable object files..."
 	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
 	      # Loop over the list of objects to be linked.
 	      for obj in $save_libobjs
 	      do
-		eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
 		if test "X$objlist" = X ||
-		   { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-		     test "$len" -le "$max_cmd_len"; }; then
-		  objlist="$objlist $obj"
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
 		else
 		  # The command $test_cmds is almost too long, add a
 		  # command to the queue.
@@ -6615,10 +7197,13 @@ EOF
 		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
 		  fi
 		  last_robj=$output_objdir/$output_la-${k}.$objext
-		  k=`expr $k + 1`
+		  func_arith $k + 1
+		  k=$func_arith_result
 		  output=$output_objdir/$output_la-${k}.$objext
 		  objlist=$obj
-		  len=1
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
 		fi
 	      done
 	      # Handle the remaining objects by creating one last
@@ -7015,14 +7600,16 @@ EOF
 	  esac
 	fi
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -7092,6 +7679,10 @@ EOF
           wrappers_required=no
         fi
         ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
@@ -7244,11 +7835,10 @@ EOF
 
 	    func_emit_cwrapperexe_src > $cwrappersource
 
-	    # we should really use a build-platform specific compiler
-	    # here, but OTOH, the wrappers (shell script and this C one)
-	    # are only useful if you want to execute the "real" binary.
-	    # Since the "real" binary is built for $host, then this
-	    # wrapper might as well be built for $host, too.
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
 	    $opt_dry_run || {
 	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
 	      $STRIP $cwrapper
@@ -7353,7 +7943,8 @@ EOF
 		# Make sure we don't pick an alternate name that also
 		# overlaps.
 		newobj=lt$counter-$objbase
-		counter=`expr $counter + 1`
+		func_arith $counter + 1
+		counter=$func_arith_result
 		case " $oldobjs " in
 		*[\ /]"$newobj "*) ;;
 		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
@@ -7368,8 +7959,9 @@ EOF
 	fi
 	eval cmds=\"$old_archive_cmds\"
 
-	if len=`expr "X$cmds" : ".*" 2>/dev/null` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  cmds=$old_archive_cmds
 	else
 	  # the command line is too long to link in one step, link in parts
@@ -7379,18 +7971,23 @@ EOF
 	  objlist=
 	  concat_cmds=
 	  save_oldobjs=$oldobjs
+	  oldobjs=
 	  # Is there a better way of finding the last object in the list?
 	  for obj in $save_oldobjs
 	  do
 	    last_oldobj=$obj
 	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
 	  for obj in $save_oldobjs
 	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	       test "$len" -le "$max_cmd_len"; then
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
 	      :
 	    else
 	      # the above command should be used before it gets too long
@@ -7401,6 +7998,7 @@ EOF
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 	      objlist=
+	      len=$len0
 	    fi
 	  done
 	  RANLIB=$save_RANLIB
@@ -7525,7 +8123,7 @@ EOF
 	  # place dlname in correct position for cygwin
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
diff --git a/bin/reconfigure b/bin/reconfigure
index 4665dae..f9fe719 100755
--- a/bin/reconfigure
+++ b/bin/reconfigure
@@ -32,7 +32,7 @@ AUTOCONF_VERSION="autoconf (GNU Autoconf) 2.61"
 AUTOMAKE_VERSION="automake (GNU automake) 1.10.1"
 AUTOHEADER_VERSION="autoheader (GNU Autoconf) 2.61"
 ACLOCAL_VERSION="aclocal (GNU automake) 1.10.1"
-LIBTOOL_VERSION="(GNU libtool) 2.2.2"
+LIBTOOL_VERSION="(GNU libtool) 2.2.6"
 #
 # When upgrading automake's version, don't forget to also update its
 # helper utilities, especially depcomp.
@@ -53,7 +53,7 @@ if test -z ${ACLOCAL}; then
   ACLOCAL=/home1/packages/automake/automake-1.10.1/bin/aclocal-1.10
 fi
 if test -z ${LIBTOOL}; then
-  LIBTOOL=/home1/packages/libtool/libtool-2.2.2/bin/libtool
+  LIBTOOL=/home1/packages/libtool/libtool-2.2.6a/bin/libtool
 fi
 
 # Check version numbers of all autotools against the "correct" versions