Moved h5cc.in and h5redeploy.in from tools/misc to bin directory. They

should always be built and installed whether tools are enabled or
disabled.  Also added Makefile.am to bin to build h5redeploy and
to install and uninstall them.  h5cc is created from h5cc.in by
configure.

3 files changed, 672 insertions, 0 deletions

diff --git a/bin/Makefile.am b/bin/Makefile.am
new file mode 100644
index 0000000..a39b695
--- /dev/null
+++ b/bin/Makefile.am
@@ -0,0 +1,57 @@
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
+##
+## Makefile.am
+## Run automake to generate a Makefile.in from this file.
+#
+# HDF5 Library Makefile(.in)
+#
+
+include $(top_srcdir)/config/commence.am
+
+# Include src directory
+AM_CPPFLAGS+=-I$(top_srcdir)/src -I$(top_srcdir)/tools/lib
+
+# These are our main targets
+bin_SCRIPTS=h5redeploy
+
+# Tell automake to clean h5redeploy script
+CLEANFILES=h5redeploy
+
+# These were generated by configure.  Remove them only when distclean.
+DISTCLEANFILES=h5cc
+
+# All programs rely on hdf5 library and h5tools library
+LDADD=$(LIBH5TOOLS) $(LIBHDF5)
+
+# How to build h5redeploy script
+h5redeploy: h5redeploy.in
+	@cp $(srcdir)/$@.in $@
+
+# h5cc needs custom install and uninstall rules, since it may be
+# named h5pcc if hdf5 is being built in parallel mode.
+if BUILD_PARALLEL_CONDITIONAL
+  H5CC_NAME=h5pcc
+else
+  H5CC_NAME=h5cc
+endif
+
+$(DESTDIR)$(bindir):
+	echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1;
+
+install-exec-local: $(DESTDIR)$(bindir)
+	@$(INSTALL) h5cc $(DESTDIR)$(bindir)/$(H5CC_NAME)
+uninstall-local:
+	@$(RM) $(DESTDIR)$(bindir)/$(H5CC_NAME)
+
+include $(top_srcdir)/config/conclude.am
diff --git a/bin/h5cc.in b/bin/h5cc.in
new file mode 100644
index 0000000..9c4e3ca
--- /dev/null
+++ b/bin/h5cc.in
@@ -0,0 +1,399 @@
+#! /bin/sh
+##
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
+##
+
+# This tool is adapted from the mpicc command of the MPICH Software.
+
+############################################################################
+##                                                                        ##
+## Things You May Have to Modify:                                         ##
+##                                                                        ##
+## If the following paths don't point to the place were HDF5 is installed ##
+## on your system (i.e., you received a binary distribution or moved the  ##
+## files from the originally installed directory to another directory)    ##
+## then modify them accordingly to represent the new paths.               ##
+##                                                                        ##
+############################################################################
+prefix="@prefix@"
+exec_prefix="@exec_prefix@"
+libdir="@libdir@"
+includedir="@includedir@"
+HL="@HL@"
+
+############################################################################
+##                                                                        ##
+## Things You Can Modify to Override HDF5 Library Build Components:       ##
+##                                                                        ##
+## (Advanced usage - know what you're doing - you're on your own here.)   ##
+## The four variables below can be used to insert paths and flags in      ##
+## CPPFLAGS, CFLAGS, LDFLAGS, or LIBS in the h5cc compile line:           ##
+##    $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS   ##
+##    $LIBS $clibpath $link_objs $link_args $shared_link                  ##
+##                                                                        ##
+## These settings can be overriden by setting HDF5_CFLAGS,                ##
+## HDF5_CPPFLAGS, HDF5_LDFLAGS, or HDF5_LIBS in the environment.          ##
+##                                                                        ##
+############################################################################
+CFLAGSBASE=""
+CPPFLAGSBASE=""
+LDFLAGSBASE=""
+LIBSBASE=""
+
+############################################################################
+##                                                                        ##
+## You shouldn't have to modify anything below this line.                 ##
+##                                                                        ##
+############################################################################
+
+# Constants definitions
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+host_os="@host_os@"
+
+prog_name="`basename $0`"
+
+allargs=""
+compile_args=""
+libraries=""
+link_args=""
+link_objs=""
+clibpath=""
+
+do_link="yes"
+do_compile="no"
+dash_o="no"
+dash_c="no"
+get_output_file="no"
+
+SHOW="eval"
+CCBASE="@CC@"
+CLINKERBASE="@CC@"
+
+# CFLAGS, CPPFLAGS and LDFLAGS are reserved for use by the script user.
+# FLAGS brought from the hdf5 build are put in H5BLD_*FLAGS.
+
+# User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's 
+# LDFLAGS come just before clibpath, user's LIBS come after $link_objs and 
+# before the hdf5 libraries in $link_args, followed by any external library 
+# paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in 
+# from the hdf5 build. The order of the flags is intended to give precedence
+# to the user's flags.
+H5BLD_CFLAGS="@AM_CFLAGS@ @CFLAGS@"
+H5BLD_CPPFLAGS="@AM_CPPFLAGS@ @CPPFLAGS@"
+H5BLD_LDFLAGS="@AM_LDFLAGS@ @LDFLAGS@"
+H5BLD_LIBS="@LIBS@"
+
+CC="${HDF5_CC:-$CCBASE}"
+CLINKER="${HDF5_CLINKER:-$CLINKERBASE}"
+CFLAGS="${HDF5_CFLAGS:-$CFLAGSBASE}"
+CPPFLAGS="${HDF5_CPPFLAGS:-$CPPFLAGSBASE}"
+LDFLAGS="${HDF5_LDFLAGS:-$LDFLAGSBASE}"
+LIBS="${HDF5_LIBS:-$LIBSBASE}"
+
+# If a static library is available, the default will be to use it.  If the only
+# available library is shared, it will be used by default.  The user can 
+# override either default, although choosing an unavailable library will result
+# in link errors.  
+STATIC_AVAILABLE="@enable_static@"
+if test "${STATIC_AVAILABLE}" = "yes"; then
+  USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
+else
+  USE_SHARED_LIB="${HDF5_USE_SHLIB:-yes}"
+fi
+
+
+usage() {
+  # A wonderfully informative "usage" message.
+  echo "usage: $prog_name [OPTIONS] <compile line>"
+  echo "  OPTIONS:"
+  echo "    -help        This help message."
+  echo "    -echo        Show all the shell commands executed"
+  echo "    -prefix=DIR  Prefix directory to find HDF5 lib/ and include/"
+  echo "                   subdirectories [default: $prefix]"
+  # A wonderfully informative "usage" message.
+  echo "usage: $prog_name [OPTIONS] <compile line>"
+  echo "  OPTIONS:"
+  echo "    -help        This help message."
+  echo "    -echo        Show all the shell commands executed"
+  echo "    -prefix=DIR  Prefix directory to find HDF5 lib/ and include/"
+  echo "                   subdirectories [default: $prefix]"
+  echo "    -show        Show the commands without executing them"
+  echo "    -showconfig  Show the HDF5 library configuration summary"
+  echo "    -shlib       Compile with shared HDF5 libraries [default for hdf5 built"
+  echo "                                                     without static libraries]"
+  echo "    -noshlib     Compile with static HDF5 libraries [default for hdf5 built"
+  echo "                                                     with static libraries]"
+  echo " "
+  echo "  <compile line>  - the normal compile line options for your compiler."
+  echo "                    $prog_name uses the same compiler you used to compile"
+  echo "                    HDF5. Check with your compiler's man pages for more"
+  echo "                    information on which options are needed."
+  echo " "
+  echo " You can override the compiler, linker, and whether or not to use static"
+  echo " or shared libraries to compile your program by setting the following"
+  echo " environment variables accordingly:"
+  echo " "
+  echo "   HDF5_CC                  -  use a different C compiler"
+  echo "   HDF5_CLINKER             -  use a different linker"
+  echo "   HDF5_USE_SHLIB=[yes|no]  -  use shared or static version of the HDF5 library"
+  echo "                                 [default: no except when built with only" 
+  echo "                                           shared libraries]"
+  echo " "
+  echo " You can also add or change paths and flags to the compile line using"
+  echo " the following environment varibles or by assigning them to their counterparts"
+  echo " in the 'Things You Can Modify to Override...'" section of $prog_name
+  echo " "
+  echo "  Variable              Current value to be replaced"
+  echo "  HDF5_CPPFLAGS         \"$CPPFLAGSBASE\""
+  echo "  HDF5_CFLAGS           \"$CFLAGSBASE\""
+  echo "  HDF5_LDFLAGS          \"$LDFLAGSBASE\""
+  echo "  HDF5_LIBS             \"$LIBSBASE\""
+  echo " "
+  echo " Note that adding library paths to HDF5_LDFLAGS where another hdf5 version"
+  echo " is located may link your program with that other hdf5 library version."
+  echo " "
+  exit $EXIT_FAILURE
+}
+
+# Show the configuration summary of the library recorded in the
+# libhdf5.settings file reside in the lib directory.
+showconfigure()
+{
+  cat ${libdir}/libhdf5.settings
+  status=$?
+}
+
+# Main
+status=$EXIT_SUCCESS
+
+if test "$#" = "0"; then
+  # No parameters specified, issue usage statement and exit.
+  usage
+fi
+
+case "$CC" in
+  gcc)
+    kind="gcc"
+    ;;
+  mpicc|mpcc|mpicc_r)
+    # Is this gcc masquarading as an MPI compiler?
+    if test "`${CC} -v 2>&1 | sed -n 2p | cut -c1-3`" = "gcc"; then
+      kind="gcc"
+    else
+      # Nope
+      kind="$host_os"
+    fi
+    ;;
+  *)
+    kind="$host_os"
+    ;;
+esac
+
+for arg in $@ ; do
+  if test "x$get_output_file" = "xyes"; then
+    link_args="$link_args $arg"
+    output_file="$arg"
+    get_output_file="no"
+    continue
+  fi
+
+  case "$arg" in
+    -c)
+      allargs="$allargs $arg"
+      compile_args="$compile_args $arg"
+
+      if test "x$do_link" = "xyes" -a -n "$output_file"; then
+        compile_args="$compile_args -o $output_file"
+      fi
+
+      do_link="no"
+      dash_c="yes"
+      ;;
+    -o)
+      allargs="$allargs $arg"
+      dash_o="yes"
+
+      if test "x$dash_c" = "xyes"; then
+        compile_args="$compile_args $arg"
+      else
+        link_args="$link_args $arg"
+        do_link="yes"
+        get_output_file="yes"
+      fi
+      ;;
+    -E|-M|-MT)
+      allargs="$allargs $arg"
+      compile_args="$compile_args $arg"
+      dash_c="yes"
+      do_link="no"
+      ;;
+    -l*)
+      libraries=" $libraries $arg "
+      allargs="$allargs $arg"
+      ;;
+    -prefix=*)
+      prefix="`expr "$arg" : '-prefix=\(.*\)'`"
+      ;;
+    -echo)
+      set -x
+      ;;
+    -show)
+      SHOW="echo"
+      ;;
+    -showconfig)
+      showconfigure
+      exit $status
+      ;;
+    -shlib)
+      USE_SHARED_LIB="yes"
+      ;;
+    -noshlib)
+      USE_SHARED_LIB="no"
+      ;;
+    -help)
+      usage
+      ;;
+    *\"*)
+      qarg="'"$arg"'"
+      allargs="$allargs $qarg"
+      ;;
+    *\'*)
+      qarg='\"'"$arg"'\"'
+      allargs="$allargs $qarg"
+      ;;
+    *)
+      allargs="$allargs $qarg"
+
+      if test -s "$arg"; then
+        ext=`expr "$arg" : '.*\(\..*\)'`
+
+        if test "x$ext" = "x.c"; then
+          do_compile="yes"
+          compile_args="$compile_args $arg"
+          fname=`basename $arg .c`
+          link_objs="$link_objs $fname.o"
+        elif test "x$ext" = "x.o"; then
+          if test "x$dash_c" = "xyes"; then
+            compile_args="$compile_args $arg"
+          else
+            do_link="yes"
+            link_objs="$link_objs $arg"
+          fi
+        elif test "x$ext" = "x.a"; then
+          # This is an archive that we're linking in
+          libraries=" $libraries $arg "
+        else
+          compile_args="$compile_args $arg"
+          link_args="$link_args $arg"
+        fi
+      else
+        compile_args="$compile_args $arg"
+        link_args="$link_args $arg"
+      fi
+      ;;
+  esac
+done
+
+if test "$dash_c" = "yes" -a "$do_compile" = no -a "$do_link" = no ; then
+    # -c was specified.  Force do_compile on.
+    do_compile=yes
+fi
+
+if test "x$do_compile" = "xyes"; then
+  if test "x$dash_c" != "xyes"; then
+    compile_args="-c $compile_args"
+  fi
+
+  $SHOW $CC -I$includedir $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $compile_args
+  status=$?
+
+  if test "$status" != "0"; then
+    exit $status
+  fi
+fi
+
+if test "x$do_link" = "xyes"; then
+  shared_link=""
+# conditionnaly link with the hl library  
+  if test "X$HL" = "Xhl"; then
+   libraries=" $libraries -lhdf5_hl -lhdf5 "
+  else
+   libraries=" $libraries  -lhdf5 "
+  fi
+  link_args="$link_args -L${libdir}"
+
+  case "$kind" in
+    gcc|linux*)
+      # MacOS X doesn't support the "-Wl,-rpath -Wl," style of linker flags.
+      # It appears to want none of them specified.
+      case "$host_os" in
+        darwin*)          flag="" ;;
+        *)                flag="-Wl,-rpath -Wl," ;;
+      esac
+      ;;
+    hpux*)                flag="-Wl,+b -Wl," ;;
+    freebsd*|solaris*)    flag="-R" ;;
+    rs6000*|aix*)         flag="-L" ;;
+    sgi)                  flag="-rpath " ;;
+    *)                    flag="" ;;
+  esac
+
+  if test -n "$flag"; then
+    shared_link="${flag}${libdir}"
+  fi
+
+  if test "x$USE_SHARED_LIB" != "xyes"; then
+    # The "-lhdf5" & "-lhdf5_hl" flags are in here already...This is a static
+    # compile though, so change it to the static version (.a) of the library.
+    new_libraries=""
+    for lib in $libraries; do
+      case "$lib" in
+        -lhdf5)
+          new_libraries="$new_libraries ${libdir}/libhdf5.a"
+          ;;
+        -lhdf5_hl)
+          new_libraries="$new_libraries ${libdir}/libhdf5_hl.a"
+          ;;
+        *)
+          new_libraries="$new_libraries $lib"
+          ;;
+      esac
+    done
+    libraries="$new_libraries"
+  fi
+
+  for lib in $libraries; do
+    if echo $link_args | grep " $lib " > /dev/null ||
+       echo $link_args | grep " $lib$" > /dev/null; then
+      :
+    else
+      link_args="$link_args $lib "
+    fi
+  done
+
+  # The LIBS are just a bunch of -l* libraries necessary for the HDF5
+  # module. It's okay if they're included twice in the compile line.
+  link_args="$link_args $H5BLD_LDFLAGS $H5BLD_LIBS"
+
+  # User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's 
+  # LDFLAGS come just before clibpath, user's LIBS come after $link_objs and 
+  # before the hdf5 libraries in $link_args, followed by any external library 
+  # paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in 
+  # from the hdf5 build. The order of the flags is intended to give precedence
+  # to the user's flags.
+  $SHOW $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args $shared_link
+  status=$?
+fi
+
+exit $status
diff --git a/bin/h5redeploy.in b/bin/h5redeploy.in
new file mode 100644
index 0000000..242459a
--- /dev/null
+++ b/bin/h5redeploy.in
@@ -0,0 +1,216 @@
+#! /bin/sh
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
+#
+
+## Update HDF5 compiler tools after the HDF5 software has been installed  ##
+## in a new location.							  ##
+## For help page, use "h5redeploy -help"				  ##
+##									  ##
+
+# Constants definitions
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+# Function definitions
+
+# show help page
+usage() {
+  # A wonderfully informative "usage" message.
+  echo "usage: $prog_name [OPTIONS]"
+  echo "  OPTIONS:"
+  echo "    -help|help        This help message"
+  echo "    -echo             Show all the shell commands executed"
+  echo "    -force            No prompt, just do it"
+  echo "    -prefix=DIR       New directory to find HDF5 lib/ and include/"
+  echo "                        subdirectories [default: current directory]"
+  echo "    -exec-prefix=DIR  New directory to find HDF5 lib/"
+  echo "                        subdirectory [default: <prefix>]"
+  echo "    -libdir=DIR       New directory for the HDF5 lib directory"
+  echo "                        [default: <exec-prefix>/lib]"
+  echo "    -includedir=DIR   New directory for the HDF5 header files"
+  echo "                        [default: <prefix>/include]"
+  echo "    -tool=TOOL        Tool to update. TOOL must be in the current"
+  echo "                        directory and writable. [default: $h5tools]"
+  echo "    -show             Show the commands without executing them"
+  echo " "
+  exit $EXIT_FAILURE
+}
+
+# display variable values
+dump_vars(){
+    echo "====Showing all variable values====="
+    echo prefix=$prefix
+    echo h5tools=$h5tools
+    echo "====End Showing====="
+}
+
+# show actions to be taken
+show_action()
+{
+    echo "Update the following tools because they are now installed at a new directory"
+    for t in $foundtools; do
+	echo "${t}:"
+	echo "   current setting=`sed -e '/^prefix=/s/prefix=//p' -e d $t`"
+	echo "   new     setting="\""$prefix"\"
+    done
+}
+
+
+# Report Error message
+ERROR()
+{
+    echo "***ERROR***"
+    echo "$1"
+}
+
+# Main
+#
+############################################################################
+## Installation directories:						  ##
+## prefix	architecture-independent files.				  ##
+## exec_prefix	architecture-dependent files, default is <prefix>.	  ##
+## libdir	libraries, default is <exec_prefix>/lib.		  ##
+## includedir	header files, default is <prefix/include>.		  ##
+## Not used here:							  ##
+## bindir	executables, <exec_prefix/bin>.				  ##
+############################################################################
+# Initialization
+h5tools="h5cc h5pcc h5fc h5pfc h5c++"	# possible hdf5 tools
+foundtools=		# tools found and will be modified
+fmode=			# force mode, default is off
+prefix=
+exec_prefix=
+libdir=
+includedir=
+
+# Parse options
+for arg in $@ ; do
+  case "$arg" in
+    -prefix=*)
+      prefix="`echo $arg | cut -f2 -d=`"
+      ;;
+    -exec-prefix=*)
+      exec_prefix="`echo $arg | cut -f2 -d=`"
+      ;;
+    -libdir=*)
+      libdir="`echo $arg | cut -f2 -d=`"
+      ;;
+    -includedir=*)
+      includedir="`echo $arg | cut -f2 -d=`"
+      ;;
+    -echo)
+      set -x
+      ;;
+    -show)
+      SHOW="echo"
+      ;;
+    -tool=*)
+      h5tools="`echo $arg | cut -f2 -d=`"
+      ;;
+    -help|help)
+      usage
+      ;;
+    -force)
+      fmode=yes
+      ;;
+    *)
+      ERROR "Unknown Option($arg)"
+      usage
+      exit $EXIT_FAILURE
+      ;;
+  esac
+done
+
+# Set to default value, one above where i am, if not given by user
+if [ -z "$prefix" ]; then
+    prefix=`(cd ..;pwd)`
+fi
+if [ -z "$exec_prefix" ]; then
+    exec_prefix='${prefix}'		# use single quotes to prevent expansion of $
+fi
+if [ -z "$libdir" ]; then
+    libdir='${exec_prefix}'/lib	# use single quotes to prevent expansion of $
+fi
+if [ -z "$includedir" ]; then
+    includedir='${prefix}'/include # use single quotes to prevent expansion of $
+fi
+
+for x in $h5tools; do
+    if [ -f $x ]; then
+	foundtools="$foundtools $x"
+	if [ ! -w $x ]; then
+	    ERROR "h5tool($x) is not writable"
+	    exit $EXIT_FAILURE
+	fi
+    fi
+done
+
+if [ -z "$foundtools" ]; then
+    ERROR "found no tools to modify"
+    exit $EXIT_FAILURE
+fi
+
+# Show actions to be taken and get consent
+show_action
+# Ask confirmation unless fmode is on
+if [ x-$fmode = x- ]; then
+    echo "Continue? (yes/no)"
+    read ansx
+    ans=`echo $ansx | tr "[A-Z]" "[a-z]"`
+    if [ x-$ans != x-yes ]; then
+	echo ABORT.  No tools changed.
+	exit $EXIT_FAILURE
+    fi
+fi
+
+
+# Create the update commands
+CMDFILE=/tmp/h5redeploy.$$
+touch $CMDFILE
+chmod 0600 $CMDFILE
+echo "/^prefix=/c"                    >> $CMDFILE
+echo prefix=\""$prefix"\"             >> $CMDFILE
+echo .                                >> $CMDFILE
+echo "/^exec_prefix=/c"               >> $CMDFILE
+echo exec_prefix=\""$exec_prefix"\"   >> $CMDFILE
+echo .                                >> $CMDFILE
+echo "/^libdir=/c"                    >> $CMDFILE
+echo libdir=\""$libdir"\"             >> $CMDFILE
+echo .                                >> $CMDFILE
+echo "/^includedir=/c"                >> $CMDFILE
+echo includedir=\""$includedir"\"     >> $CMDFILE
+echo .                                >> $CMDFILE
+(echo w; echo q)                      >> $CMDFILE
+
+
+# Update them
+if [ "$SHOW" = "echo" ]; then
+    echo "===Update commands are:===="
+    cat $CMDFILE
+    echo "===End Update commands====="
+fi
+
+for t in $foundtools; do
+    echo Update $t ...
+    COMMAND="ed - $t"
+    if [ "$SHOW" = "echo" ]; then
+	echo $COMMAND
+    else
+	$COMMAND < $CMDFILE
+    fi
+done
+
+
+# Cleanup
+rm -f $CMDFILE
+exit $EXIT_SUCCESS