[svn-r11095] Purpose:

Configuration feature

Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails.  This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.

Solution:
When serial tests run, their output is saved in *.log or *.logsh.  While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.

Platforms tested:
mir, modi4 (parallel and serial), copper, shanti

1 files changed, 53 insertions, 15 deletions

diff --git a/c++/Makefile.in b/c++/Makefile.in
index 8130dbf..cbd29d9 100644
--- a/c++/Makefile.in
+++ b/c++/Makefile.in
@@ -281,7 +281,16 @@ H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
 # .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
+# Serial tests create .log and .logsh files.  It's important only to clean log
+# files generated by HDF5's tests, because the .log suffix is used for
+# other files (e.g., config.log)!
+MOSTLYCLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
+        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
+        $(TEST_SCRIPT_CHKSH:.chksh_=.chksh)                              \
+        $(TEST_SCRIPT_PARA_CHKSH:.chksh_=.chksh)                         \
+        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
+        $(TEST_SCRIPT_CHKSH:.chksh_=.logsh)
+
 @BUILD_CXX_CONDITIONAL_TRUE@SUBDIRS = src test
 DIST_SUBDIRS = src test examples
 
@@ -615,6 +624,12 @@ uninstall-info: uninstall-info-recursive
 	tags tags-recursive uninstall uninstall-am uninstall-info-am
 
 
+# check-install is a synonym for installcheck.
+# Add this build rule here (rather than in conclude.am, where build rules
+# normally go) because it should be included in the top-level Makefile.am
+# as well.
+check-install: installcheck
+
 # Clean and mostlyclean need to recurse into examples directory
 clean-local:
 	if test -f examples/Makefile; then                                \
@@ -638,14 +653,16 @@ installcheck-local:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-build-lib: $(LIB)
-build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., Fortran type detection)
+build-lib: $(BUILT_SOURCES) $(LIB)
+build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
+build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
 
 lib progs tests check-s check-p ::
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
-	    if test $$d != X -a $$d != .; then                                \
+	    if test $$d != X && test $$d != .; then                           \
 	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
 	    fi;                                                               \
 	done
@@ -657,6 +674,8 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
 
 # make install-doc doesn't do anything outside of doc directory, but
 # Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
 install-doc uninstall-doc:
 	@echo "Nothing to be done."
 
@@ -685,8 +704,15 @@ build-check-s: $(LIB) $(PROGS) $(TESTS)
 	fi
 
 _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+	@for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log)            \
+	          $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do            \
+	   if test $$d != dummy && test $$d != .log &&               \
+	                           test $$d != .logsh; then          \
+	      cat `basename $$d`;                                    \
+	   fi;                                                       \
+	done
 
-# The .chkexe_ here is the "dummy" that prevents the target from being
+# The dummy.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
@@ -694,26 +720,32 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	  if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \
 	    echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
 	  else \
+	    echo "============================" > $(@:.chkexe_=.log); \
 	    if test "X$(HDF_FORTRAN)" = "Xyes"; then \
 	      echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+	      echo "Fortran API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
 	    elif test "X$(HDF_CXX)" = "Xyes"; then \
 	      echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+	      echo "C++ API: $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log);\
 	    else \
 	      echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
+	      echo "$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) Test Log" >> $(@:.chkexe_=.log); \
 	    fi; \
-	    echo "============================"; \
+	    echo "============================" >> $(@:.chkexe_=.log); \
 	    srcdir="$(srcdir)" \
-	      $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
+	      $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) 2>&1 >> $(@:.chkexe_=.log) \
 	      && touch $(@:.chkexe_=.chkexe) || \
 	      (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	      exit 1; \
-	    echo ""; \
+	      (cat $(@:.chkexe_=.log) && false) || exit 1; \
+	    echo "" >> $(@:.chkexe_=.log); \
+	    echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)" >> $(@:.chkexe_=.log); \
+	    echo "============================" >> $(@:.chkexe_=.log); \
 	    echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
 	  fi; \
 	  echo "============================"; \
 	fi
 
-# The .chksh_ here is the "dummy" that prevents the target from being
+# The dummy.chksh here prevents the target from being
 # empty if there are no tests in the current directory.
 $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
@@ -721,21 +753,27 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	  if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
 	    echo "No need to test `basename $(@:.chksh_=)` again."; \
 	  else \
+	    echo "============================" > `basename $(@:.chksh_=.logsh)`; \
 	    if test "X$(HDF_FORTRAN)" = "Xyes"; then \
 	      echo "Fortran API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+	      echo "Fortran API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
 	    elif test "X$(HDF_CXX)" = "Xyes"; then \
 	      echo "C++ API: Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+	      echo "C++ API: `basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `baename $(@:.chksh_=.logsh)`; \
 	    else \
 	      echo "Testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
+	      echo "`basename $(@:.chksh_=)` $(TEST_FLAGS) Test Log" >> `basename $(@:.chksh_=.logsh)`; \
 	    fi; \
-	    echo "============================"; \
+	    echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
 	    RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	    srcdir="$(srcdir)" \
-	      $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \
+	      $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) 2>&1 >> `basename $(@:.chksh_=.logsh)` \
 	      && touch `basename $(@:.chksh_=.chksh)` || \
 	      (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
-	      exit 1; \
-	    echo ""; \
+	      (cat `basename $(@:.chksh_=.logsh)` && false) || exit 1; \
+	    echo "" >> `basename $(@:.chksh_=.logsh)`; \
+	    echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)" >> `basename $(@:.chksh_=.logsh)`; \
+	    echo "============================" >> `basename $(@:.chksh_=.logsh)`; \
 	    echo "Finished testing `basename $(@:.chksh_=)` $(TEST_FLAGS)"; \
 	  fi; \
 	  echo "============================"; \