[svn-r7099]

Purpose: Maintenance

Description: Bumped the version number to 1.5.62 after creating
             a tar ball for the fourth round of testing.

Solution: run bin/h5vers -s scipt on arabica

Platforms tested: N/A

Misc. update:

2 files changed, 1332 insertions, 757 deletions

diff --git a/c++/configure b/c++/configure
index 2ab0dfa..002fc98 100755
--- a/c++/configure
+++ b/c++/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 # From configure.in Id: configure.in.
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.53 for HDF5 C++ 1.5.61.
+# Generated by GNU Autoconf 2.57 for HDF5 C++ 1.5.62.
 #
 # Report bugs to <hdfhelp@ncsa.uiuc.edu>.
 #
@@ -9,173 +9,6 @@
 # Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
-
-# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) lt_cv_sys_path_separator=';' ;;
-    *)     lt_cv_sys_path_separator=':' ;;
-  esac
-  PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
@@ -184,11 +17,13 @@ fi
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
 
-# NLS nuisances.
 # Support unset when possible.
 if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
   as_unset=unset
@@ -196,34 +31,42 @@ else
   as_unset=false
 fi
 
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
-    { $as_unset LANG || test "${LANG+set}" != set; } ||
-      { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
-    { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
-      { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
-    { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
-      { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
-    { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
-      { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
-    { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
-      { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
-    { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
-      { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
-    { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
-      { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
-    { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
-      { LC_MESSAGES=C; export LC_MESSAGES; }
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
 
 
 # Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
+as_me=`$as_basename "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)$' \| \
@@ -234,6 +77,7 @@ echo X/"$0" |
   	  /^X\/\(\/\).*/{ s//\1/; q; }
   	  s/.*/./; q'`
 
+
 # PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
@@ -244,15 +88,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
 
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conftest.sh
-  echo  "exit 0"   >>conftest.sh
-  chmod +x conftest.sh
-  if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
     PATH_SEPARATOR=';'
   else
     PATH_SEPARATOR=:
   fi
-  rm -f conftest.sh
+  rm -f conf$$.sh
 fi
 
 
@@ -300,6 +144,8 @@ do
   as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
   test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
 	     CONFIG_SHELL=$as_dir/$as_base
 	     export CONFIG_SHELL
 	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
@@ -372,6 +218,12 @@ else
 fi
 rm -f conf$$ conf$$.exe conf$$.file
 
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  as_mkdir_p=false
+fi
+
 as_executable_p="test -f"
 
 # Sed expression to map a string onto a valid CPP name.
@@ -388,7 +240,166 @@ as_nl='
 IFS=" 	$as_nl"
 
 # CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
+$as_unset CDPATH
+
+
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) lt_cv_sys_path_separator=';' ;;
+    *)     lt_cv_sys_path_separator=':' ;;
+  esac
+  PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
 
 
 # Name of the host.
@@ -402,6 +413,7 @@ exec 6>&1
 # Initializations.
 #
 ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
 cross_compiling=no
 subdirs=
 MFLAGS=
@@ -416,8 +428,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='HDF5 C++'
 PACKAGE_TARNAME='hdf5-c--'
-PACKAGE_VERSION='1.5.61'
-PACKAGE_STRING='HDF5 C++ 1.5.61'
+PACKAGE_VERSION='1.5.62'
+PACKAGE_STRING='HDF5 C++ 1.5.62'
 PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu'
 
 ac_unique_file="src/H5Library.cpp"
@@ -458,6 +470,8 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CPPFLAGS ROOT DEFAULT_LIBS CXX CXXFLAGS LDFLAGS ac_ct_CXX EXEEXT OBJEXT CXXCPP SET_MAKE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CC CFLAGS ac_ct_CC LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP EGREP LIBTOOL PERL AR LT_STATIC_EXEC DYNAMIC_DIRS SEARCH SETX LIBOBJS LTLIBOBJS'
+ac_subst_files='DEPEND COMMENCE CONCLUDE'
 
 # Initialize some variables set by options.
 ac_init_help=
@@ -881,6 +895,9 @@ if test ! -r $srcdir/$ac_unique_file; then
    { (exit 1); exit 1; }; }
   fi
 fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+   { (exit 1); exit 1; }; }
 srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
 ac_env_build_alias_set=${build_alias+set}
 ac_env_build_alias_value=$build_alias
@@ -934,7 +951,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures HDF5 C++ 1.5.61 to adapt to many kinds of systems.
+\`configure' configures HDF5 C++ 1.5.62 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -995,7 +1012,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of HDF5 C++ 1.5.61:";;
+     short | recursive ) echo "Configuration of HDF5 C++ 1.5.62:";;
    esac
   cat <<\_ACEOF
 
@@ -1075,7 +1092,7 @@ esac
 # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
 # absolute.
 ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
 ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
 ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
 
@@ -1101,8 +1118,8 @@ fi
 test -n "$ac_init_help" && exit 0
 if $ac_init_version; then
   cat <<\_ACEOF
-HDF5 C++ configure 1.5.61
-generated by GNU Autoconf 2.53
+HDF5 C++ configure 1.5.62
+generated by GNU Autoconf 2.57
 
 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
 Free Software Foundation, Inc.
@@ -1116,8 +1133,8 @@ cat >&5 <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by HDF5 C++ $as_me 1.5.61, which was
-generated by GNU Autoconf 2.53.  Invocation command line was
+It was created by HDF5 C++ $as_me 1.5.62, which was
+generated by GNU Autoconf 2.57.  Invocation command line was
 
   $ $0 $@
 
@@ -1169,27 +1186,54 @@ _ACEOF
 
 # Keep a trace of the command line.
 # Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
 # Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
 ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
 ac_sep=
-for ac_arg
+ac_must_keep_next=false
+for ac_pass in 1 2
 do
-  case $ac_arg in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n ) continue ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    continue ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-    ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-  esac
-  case " $ac_configure_args " in
-    *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-    *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-       ac_sep=" " ;;
-  esac
-  # Get rid of the leading space.
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+        ac_must_keep_next=false # Got value, back to normal.
+      else
+        case $ac_arg in
+          *=* | --config-cache | -C | -disable-* | --disable-* \
+          | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+          | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+          | -with-* | --with-* | -without-* | --without-* | --x)
+            case "$ac_configure_args0 " in
+              "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+            esac
+            ;;
+          -* ) ac_must_keep_next=true ;;
+        esac
+      fi
+      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+      # Get rid of the leading space.
+      ac_sep=" "
+      ;;
+    esac
+  done
 done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
 
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
@@ -1200,6 +1244,7 @@ trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
     echo
+
     cat <<\_ASBOX
 ## ---------------- ##
 ## Cache variables. ##
@@ -1222,6 +1267,35 @@ _ASBOX
     esac;
 }
     echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=$`echo $ac_var`
+      echo "$ac_var='"'"'$ac_val'"'"'"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=$`echo $ac_var`
+        echo "$ac_var='"'"'$ac_val'"'"'"
+      done | sort
+      echo
+    fi
+
     if test -s confdefs.h; then
       cat <<\_ASBOX
 ## ----------- ##
@@ -1229,7 +1303,7 @@ _ASBOX
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h
+      sed "/^$/d" confdefs.h | sort
       echo
     fi
     test "$ac_signal" != 0 &&
@@ -1395,6 +1469,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
+
 ac_aux_dir=
 for ac_dir in ../bin $srcdir/../bin; do
   if test -f $ac_dir/install-sh; then
@@ -1681,14 +1756,12 @@ ac_compiler=`set X $ac_compile; echo $2`
 
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -1698,7 +1771,7 @@ main ()
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe"
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
@@ -1717,26 +1790,39 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
 # Be careful to initialize this variable, since it used to be cached.
 # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
 ac_cv_exeext=
-for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null;
-                ls a.out conftest 2>/dev/null;
-                ls a.* conftest.* 2>/dev/null`; do
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+  test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;;
-    a.out ) # We found the default executable, but exeext='' is most
-            # certainly right.
-            break;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-          # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
-          export ac_cv_exeext
-          break;;
-    * ) break;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+        ;;
+    conftest.$ac_ext )
+        # This is the source file.
+        ;;
+    [ab].out )
+        # We found the default executable, but exeext='' is most
+        # certainly right.
+        break;;
+    *.* )
+        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+        # FIXME: I believe we export ac_cv_exeext for Libtool,
+        # but it would be cool to find out if it's true.  Does anybody
+        # maintain Libtool? --akim.
+        export ac_cv_exeext
+        break;;
+    * )
+        break;;
   esac
 done
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables" >&5
-echo "$as_me: error: C++ compiler cannot create executables" >&2;}
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C++ compiler cannot create executables
+See \`config.log' for more details." >&2;}
    { (exit 77); exit 77; }; }
 fi
 
@@ -1763,9 +1849,11 @@ if test "$cross_compiling" != yes; then
 	cross_compiling=yes
     else
 	{ { echo "$as_me:$LINENO: error: cannot run C++ compiled programs.
-If you meant to cross compile, use \`--host'." >&5
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
 echo "$as_me: error: cannot run C++ compiled programs.
-If you meant to cross compile, use \`--host'." >&2;}
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
     fi
   fi
@@ -1773,7 +1861,7 @@ fi
 echo "$as_me:$LINENO: result: yes" >&5
 echo "${ECHO_T}yes" >&6
 
-rm -f a.out a.exe conftest$ac_cv_exeext
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
 ac_clean_files=$ac_clean_files_save
 # Check the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
@@ -1793,9 +1881,10 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
 # work properly (i.e., refer to `conftest.exe'), while it won't with
 # `rm'.
-for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
           export ac_cv_exeext
           break;;
@@ -1803,8 +1892,10 @@ for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
   esac
 done
 else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1822,14 +1913,12 @@ if test "${ac_cv_objext+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -1846,16 +1935,19 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (exit $ac_status); }; then
   for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
 done
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;}
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1872,14 +1964,12 @@ if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -1906,7 +1996,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_compiler_gnu=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_compiler_gnu=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -1926,14 +2017,12 @@ if test "${ac_cv_prog_cxx_g+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -1957,7 +2046,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_cv_prog_cxx_g=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_prog_cxx_g=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -1990,15 +2080,13 @@ for ac_declaration in \
 do
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <stdlib.h>
 $ac_declaration
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -2022,20 +2110,19 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   :
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 continue
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 $ac_declaration
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -2059,7 +2146,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   break
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
 done
@@ -2095,18 +2183,28 @@ for ac_cxx_preproc_warn_flag in '' yes
 do
   # Use a header file that comes with gcc, so configuring glibc
   # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
-#include <assert.h>
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
                      Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2123,7 +2221,8 @@ if test -z "$ac_cpp_err"; then
   :
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   # Broken: fails on valid input.
 continue
 fi
@@ -2133,13 +2232,17 @@ rm -f conftest.err conftest.$ac_ext
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2157,7 +2260,8 @@ if test -z "$ac_cpp_err"; then
 continue
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   # Passes both tests.
 ac_preproc_ok=:
 break
@@ -2186,18 +2290,28 @@ for ac_cxx_preproc_warn_flag in '' yes
 do
   # Use a header file that comes with gcc, so configuring glibc
   # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
-#include <assert.h>
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
                      Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2214,7 +2328,8 @@ if test -z "$ac_cpp_err"; then
   :
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   # Broken: fails on valid input.
 continue
 fi
@@ -2224,13 +2339,17 @@ rm -f conftest.err conftest.$ac_ext
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2248,7 +2367,8 @@ if test -z "$ac_cpp_err"; then
 continue
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   # Passes both tests.
 ac_preproc_ok=:
 break
@@ -2261,8 +2381,10 @@ rm -f conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then
   :
 else
-  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&5
-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&2;}
+  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -2272,15 +2394,15 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 	CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`"
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
 if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.make <<\_ACEOF
 all:
-	@echo 'ac_maketemp="${MAKE}"'
+	@echo 'ac_maketemp="$(MAKE)"'
 _ACEOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
 eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
@@ -2648,9 +2770,7 @@ if test $ac_prog_rejected = yes; then
     # However, it has the same basename, so the bogon will be chosen
     # first if we set CC to just the basename; use the full file name.
     shift
-    set dummy "$as_dir/$ac_word" ${1+"$@"}
-    shift
-    ac_cv_prog_CC="$@"
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
   fi
 fi
 fi
@@ -2755,8 +2875,10 @@ fi
 fi
 
 
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;}
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 
 # Provide some information about the compiler.
@@ -2786,14 +2908,12 @@ if test "${ac_cv_c_compiler_gnu+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -2820,7 +2940,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_compiler_gnu=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_compiler_gnu=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -2840,14 +2961,12 @@ if test "${ac_cv_prog_cc_g+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -2871,7 +2990,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_cv_prog_cc_g=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_prog_cc_g=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -2893,6 +3013,102 @@ else
     CFLAGS=
   fi
 fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX			-qlanglvl=ansi
+# Ultrix and OSF/1	-std1
+# HP-UX 10.20 and later	-Ae
+# HP-UX older versions	-Aa -D_HPUX_SOURCE
+# SVR4			-Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+  x|xno)
+    echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+  *)
+    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+    CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
 # Some people use a C++ compiler to compile C.  Since we use `exit',
 # in C++ we need to declare it.  In case someone uses the same compiler
 # for both compiling C and C++ we need to have the C++ compiler decide
@@ -2925,15 +3141,13 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
 do
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <stdlib.h>
 $ac_declaration
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -2957,20 +3171,19 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   :
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 continue
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 $ac_declaration
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -2994,7 +3207,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   break
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
 done
@@ -3007,7 +3221,8 @@ fi
 
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
 ac_ext=c
@@ -3597,18 +3812,28 @@ for ac_c_preproc_warn_flag in '' yes
 do
   # Use a header file that comes with gcc, so configuring glibc
   # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
-#include <assert.h>
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
                      Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -3625,7 +3850,8 @@ if test -z "$ac_cpp_err"; then
   :
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   # Broken: fails on valid input.
 continue
 fi
@@ -3635,13 +3861,17 @@ rm -f conftest.err conftest.$ac_ext
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -3659,7 +3889,8 @@ if test -z "$ac_cpp_err"; then
 continue
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   # Passes both tests.
 ac_preproc_ok=:
 break
@@ -3688,18 +3919,28 @@ for ac_c_preproc_warn_flag in '' yes
 do
   # Use a header file that comes with gcc, so configuring glibc
   # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
-#include <assert.h>
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
                      Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -3716,7 +3957,8 @@ if test -z "$ac_cpp_err"; then
   :
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   # Broken: fails on valid input.
 continue
 fi
@@ -3726,13 +3968,17 @@ rm -f conftest.err conftest.$ac_ext
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -3750,7 +3996,8 @@ if test -z "$ac_cpp_err"; then
 continue
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   # Passes both tests.
 ac_preproc_ok=:
 break
@@ -3763,8 +4010,10 @@ rm -f conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then
   :
 else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
+  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -3775,6 +4024,21 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
 echo "$as_me:$LINENO: checking for ANSI C header files" >&5
 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
 if test "${ac_cv_header_stdc+set}" = set; then
@@ -3782,48 +4046,59 @@ if test "${ac_cv_header_stdc+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <stdlib.h>
 #include <stdarg.h>
 #include <string.h>
 #include <float.h>
 
+int
+main ()
+{
+
+  ;
+  return 0;
+}
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   ac_cv_header_stdc=yes
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_header_stdc=no
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <string.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "memchr" >/dev/null 2>&1; then
+  $EGREP "memchr" >/dev/null 2>&1; then
   :
 else
   ac_cv_header_stdc=no
@@ -3836,12 +4111,16 @@ if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <stdlib.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "free" >/dev/null 2>&1; then
+  $EGREP "free" >/dev/null 2>&1; then
   :
 else
   ac_cv_header_stdc=no
@@ -3857,13 +4136,18 @@ if test $ac_cv_header_stdc = yes; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <ctype.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
 #else
-# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
+# define ISLOWER(c) \
+                   (('a' <= (c) && (c) <= 'i') \
                      || ('j' <= (c) && (c) <= 'r') \
                      || ('s' <= (c) && (c) <= 'z'))
 # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
@@ -3896,11 +4180,12 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 else
   echo "$as_me: program exited with status $ac_status" >&5
 echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 fi
@@ -3935,7 +4220,11 @@ if eval "test \"\${$as_ac_Header+set}\" = set"; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 $ac_includes_default
 
 #include <$ac_header>
@@ -3955,7 +4244,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   eval "$as_ac_Header=yes"
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 eval "$as_ac_Header=no"
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -3990,7 +4280,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -4009,7 +4303,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -4021,13 +4316,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -4044,7 +4343,8 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -4057,14 +4357,32 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -4405,7 +4723,7 @@ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 4408 "configure"' > conftest.$ac_ext
+  echo '#line 4726 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -4445,14 +4763,12 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
      cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -4476,7 +4792,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   lt_cv_cc_needs_belf=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 lt_cv_cc_needs_belf=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -4784,14 +5101,12 @@ else
     CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
     cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -4830,7 +5145,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
 
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
       lt_cv_prog_cc_pic_works=no
 
 fi
@@ -4873,14 +5189,12 @@ else
   LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -4904,7 +5218,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   lt_cv_prog_cc_static_works=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
   LDFLAGS="$save_LDFLAGS"
@@ -4946,7 +5261,7 @@ chmod -w .
 save_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
 compiler_c_o=no
-if { (eval echo configure:4949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+if { (eval echo configure:5264: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
   # The compiler can only warn and ignore the option if not recognized
   # So say no if there are warnings
   if test -s out/conftest.err; then
@@ -4988,14 +5303,12 @@ else
   ac_objext=lo
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -5026,7 +5339,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
 
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
   ac_objext="$save_objext"
@@ -5074,14 +5388,12 @@ echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_
   compiler_rtti_exceptions=no
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -5112,7 +5424,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
 
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
   CFLAGS="$save_CFLAGS"
@@ -6351,37 +6664,44 @@ if test "${ac_cv_func_shl_load+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.  */
-#include <assert.h>
+    which can conflict with char shl_load (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
+{
 #endif
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char shl_load ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
 #if defined (__stub_shl_load) || defined (__stub___shl_load)
 choke me
 #else
-f = shl_load;
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
 #endif
 
+int
+main ()
+{
+return f != shl_load;
   ;
   return 0;
 }
@@ -6401,7 +6721,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_func_shl_load=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_func_shl_load=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6420,7 +6741,11 @@ else
 LIBS="-ldld  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -6429,12 +6754,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char shl_load ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -6458,7 +6777,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_dld_shl_load=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_dld_shl_load=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6476,37 +6796,44 @@ if test "${ac_cv_func_dlopen+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.  */
-#include <assert.h>
+    which can conflict with char dlopen (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
+{
 #endif
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char dlopen ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
 #if defined (__stub_dlopen) || defined (__stub___dlopen)
 choke me
 #else
-f = dlopen;
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
 #endif
 
+int
+main ()
+{
+return f != dlopen;
   ;
   return 0;
 }
@@ -6526,7 +6853,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_func_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_func_dlopen=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6545,7 +6873,11 @@ else
 LIBS="-ldl  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -6554,12 +6886,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char dlopen ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -6583,7 +6909,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_dl_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_dl_dlopen=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6603,7 +6930,11 @@ else
 LIBS="-lsvld  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -6612,12 +6943,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char dlopen ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -6641,7 +6966,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_svld_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_svld_dlopen=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6661,7 +6987,11 @@ else
 LIBS="-ldld  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -6670,12 +7000,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char dld_link ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -6699,7 +7023,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_dld_dld_link=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_dld_dld_link=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6757,7 +7082,7 @@ else
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 6760 "configure"
+#line 7085 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -6855,7 +7180,7 @@ else
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 6858 "configure"
+#line 7183 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -7808,7 +8133,11 @@ else
 LIBS="-lm  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -7817,12 +8146,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char ceil ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -7846,7 +8169,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_m_ceil=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_m_ceil=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -7875,7 +8199,11 @@ else
 LIBS="-lsocket  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -7884,12 +8212,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char socket ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -7913,7 +8235,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_socket_socket=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_socket_socket=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -7940,7 +8263,11 @@ else
 LIBS="-lnsl  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -7949,12 +8276,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char xdr_int ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -7978,7 +8299,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_nsl_xdr_int=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_nsl_xdr_int=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8068,13 +8390,19 @@ echo "$as_me:$LINENO: checking if $CXX needs old style header files in includes"
 echo $ECHO_N "checking if $CXX needs old style header files in includes... $ECHO_C" >&6
 
 if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 #include <iostream>
 
@@ -8098,26 +8426,33 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 else
   echo "$as_me: program exited with status $ac_status" >&5
 echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ( exit $ac_status )
 
   echo yes
   CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME"
 
 fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 
 echo "$as_me:$LINENO: checking if $CXX can handle namespaces" >&5
 echo $ECHO_N "checking if $CXX can handle namespaces... $ECHO_C" >&6
 if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 namespace H5 {
 int fnord;
@@ -8147,26 +8482,33 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 else
   echo "$as_me: program exited with status $ac_status" >&5
 echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ( exit $ac_status )
 
    echo no
    CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE"
 
 fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 
 echo "$as_me:$LINENO: checking if $CXX supports std" >&5
 echo $ECHO_N "checking if $CXX supports std... $ECHO_C" >&6
 if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 #include <string>
 
@@ -8195,26 +8537,33 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 else
   echo "$as_me: program exited with status $ac_status" >&5
 echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ( exit $ac_status )
 
    echo no
    CXXFLAGS="${CXXFLAGS} -DH5_NO_STD"
 
 fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 
 echo "$as_me:$LINENO: checking if $CXX supports bool types" >&5
 echo $ECHO_N "checking if $CXX supports bool types... $ECHO_C" >&6
 if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 int main(void) {
    bool flag;
@@ -8239,26 +8588,33 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 else
   echo "$as_me: program exited with status $ac_status" >&5
 echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ( exit $ac_status )
 
    echo no
    CXXFLAGS="${CXXFLAGS} -DBOOL_NOTDEFINED"
 
 fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 
 echo "$as_me:$LINENO: checking if $CXX can handle static cast" >&5
 echo $ECHO_N "checking if $CXX can handle static cast... $ECHO_C" >&6
 if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 int main(void) {
    float test_float;
@@ -8286,14 +8642,15 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 else
   echo "$as_me: program exited with status $ac_status" >&5
 echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ( exit $ac_status )
 
   echo no
   CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST"
 
 fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 
 
@@ -8328,7 +8685,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -8347,7 +8708,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8359,13 +8721,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8382,7 +8748,8 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -8395,14 +8762,32 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -8434,7 +8819,11 @@ else
 LIBS="-lz  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -8443,12 +8832,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char compress2 ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -8472,7 +8855,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_z_compress2=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_z_compress2=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8498,37 +8882,44 @@ if test "${ac_cv_func_compress2+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char compress2 (); below.  */
-#include <assert.h>
+    which can conflict with char compress2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
+{
 #endif
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char compress2 ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
 #if defined (__stub_compress2) || defined (__stub___compress2)
 choke me
 #else
-f = compress2;
+char (*f) () = compress2;
+#endif
+#ifdef __cplusplus
+}
 #endif
 
+int
+main ()
+{
+return f != compress2;
   ;
   return 0;
 }
@@ -8548,7 +8939,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_func_compress2=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_func_compress2=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8620,7 +9012,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -8639,7 +9035,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8651,13 +9048,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8674,7 +9075,8 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -8687,14 +9089,32 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -8733,7 +9153,11 @@ else
 LIBS="-lz  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -8742,12 +9166,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char compress2 ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -8771,7 +9189,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_z_compress2=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_z_compress2=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8797,37 +9216,44 @@ if test "${ac_cv_func_compress2+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char compress2 (); below.  */
-#include <assert.h>
+    which can conflict with char compress2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
+{
 #endif
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char compress2 ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
 #if defined (__stub_compress2) || defined (__stub___compress2)
 choke me
 #else
-f = compress2;
+char (*f) () = compress2;
+#endif
+#ifdef __cplusplus
+}
 #endif
 
+int
+main ()
+{
+return f != compress2;
   ;
   return 0;
 }
@@ -8847,7 +9273,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_func_compress2=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_func_compress2=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8905,7 +9332,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -8924,7 +9355,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8936,13 +9368,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8959,7 +9395,8 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -8972,14 +9409,32 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -9011,7 +9466,11 @@ else
 LIBS="-lsz  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -9020,12 +9479,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char SZ_BufftoBuffCompress ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -9049,7 +9502,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_sz_SZ_BufftoBuffCompress=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_sz_SZ_BufftoBuffCompress=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -9129,7 +9583,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -9148,7 +9606,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -9160,13 +9619,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -9183,7 +9646,8 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -9196,14 +9660,32 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -9242,7 +9724,11 @@ else
 LIBS="-lsz  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -9251,12 +9737,6 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char SZ_BufftoBuffCompress ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -9280,7 +9760,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_sz_SZ_BufftoBuffCompress=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_cv_lib_sz_SZ_BufftoBuffCompress=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -9346,7 +9827,11 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -9365,7 +9850,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -9377,13 +9863,17 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
+  grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -9400,7 +9890,8 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -9413,14 +9904,32 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -9452,7 +9961,11 @@ _ACEOF
 echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -9466,12 +9979,6 @@ echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6
 #include <sys/socket.h>
 #endif
 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
 int
 main ()
 {
@@ -9501,7 +10008,8 @@ _ACEOF
 echo "${ECHO_T}yes" >&6
 else
   echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
 echo "$as_me:$LINENO: result: no" >&5
 echo "${ECHO_T}no" >&6
 
@@ -9523,7 +10031,7 @@ cat >confcache <<\_ACEOF
 # config.status only pays attention to the cache file if you give it
 # the --recheck option to rerun configure.
 #
-# `ac_cv_env_foo' variables (set or unset) will be overriden when
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
 # loading this file, other *unset* `ac_cv_foo' will be assigned the
 # following values.
 
@@ -9558,7 +10066,7 @@ _ACEOF
      t end
      /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
      : end' >>confcache
-if cmp -s $cache_file confcache; then :; else
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
   if test -w $cache_file; then
     test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
     cat confcache >$cache_file
@@ -9659,7 +10167,7 @@ rm -f conftest conftest.o conftest.c core core.* *.core dummy.o
 
 saved_no_create=$no_create
 no_create=yes
-ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/Makefile src/h5c++ test/Makefile examples/Makefile"
+                                                                                                                        ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/Makefile src/h5c++ test/Makefile examples/Makefile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -9671,7 +10179,7 @@ cat >confcache <<\_ACEOF
 # config.status only pays attention to the cache file if you give it
 # the --recheck option to rerun configure.
 #
-# `ac_cv_env_foo' variables (set or unset) will be overriden when
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
 # loading this file, other *unset* `ac_cv_foo' will be assigned the
 # following values.
 
@@ -9706,7 +10214,7 @@ _ACEOF
      t end
      /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
      : end' >>confcache
-if cmp -s $cache_file confcache; then :; else
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
   if test -w $cache_file; then
     test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
     cat confcache >$cache_file
@@ -9768,6 +10276,21 @@ DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
 rm -f confdef2opt.sed
 
 
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_i=`echo "$ac_i" |
+         sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+  # 2. Add them.
+  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
 
 : ${CONFIG_STATUS=./config.status}
 ac_clean_files_save=$ac_clean_files
@@ -9782,11 +10305,12 @@ cat >$CONFIG_STATUS <<_ACEOF
 # configure, is in config.log if it exists.
 
 debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
 SHELL=\${CONFIG_SHELL-$SHELL}
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
-
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
@@ -9795,11 +10319,13 @@ cat >>$CONFIG_STATUS <<\_ACEOF
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
 
-# NLS nuisances.
 # Support unset when possible.
 if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
   as_unset=unset
@@ -9807,34 +10333,42 @@ else
   as_unset=false
 fi
 
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
-    { $as_unset LANG || test "${LANG+set}" != set; } ||
-      { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
-    { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
-      { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
-    { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
-      { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
-    { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
-      { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
-    { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
-      { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
-    { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
-      { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
-    { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
-      { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
-    { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
-      { LC_MESSAGES=C; export LC_MESSAGES; }
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
 
 
 # Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
+as_me=`$as_basename "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)$' \| \
@@ -9845,6 +10379,7 @@ echo X/"$0" |
   	  /^X\/\(\/\).*/{ s//\1/; q; }
   	  s/.*/./; q'`
 
+
 # PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
@@ -9855,15 +10390,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
 
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conftest.sh
-  echo  "exit 0"   >>conftest.sh
-  chmod +x conftest.sh
-  if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
     PATH_SEPARATOR=';'
   else
     PATH_SEPARATOR=:
   fi
-  rm -f conftest.sh
+  rm -f conf$$.sh
 fi
 
 
@@ -9912,6 +10447,8 @@ do
   as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
   test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
 	     CONFIG_SHELL=$as_dir/$as_base
 	     export CONFIG_SHELL
 	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
@@ -9985,6 +10522,12 @@ else
 fi
 rm -f conf$$ conf$$.exe conf$$.file
 
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  as_mkdir_p=false
+fi
+
 as_executable_p="test -f"
 
 # Sed expression to map a string onto a valid CPP name.
@@ -10001,7 +10544,7 @@ as_nl='
 IFS=" 	$as_nl"
 
 # CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
+$as_unset CDPATH
 
 exec 6>&1
 
@@ -10017,8 +10560,8 @@ _ASBOX
 } >&5
 cat >&5 <<_CSEOF
 
-This file was extended by HDF5 C++ $as_me 1.5.61, which was
-generated by GNU Autoconf 2.53.  Invocation command line was
+This file was extended by HDF5 C++ $as_me 1.5.62, which was
+generated by GNU Autoconf 2.57.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -10058,6 +10601,7 @@ Usage: $0 [OPTIONS] [FILE]...
 
   -h, --help       print this help, then exit
   -V, --version    print version number, then exit
+  -q, --quiet      do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
   --file=FILE[:TEMPLATE]
@@ -10071,8 +10615,8 @@ _ACEOF
 
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
-HDF5 C++ config.status 1.5.61
-configured by $0, generated by GNU Autoconf 2.53,
+HDF5 C++ config.status 1.5.62
+configured by $0, generated by GNU Autoconf 2.57,
   with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
 
 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
@@ -10093,25 +10637,25 @@ do
   --*=*)
     ac_option=`expr "x$1" : 'x\([^=]*\)='`
     ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    shift
-    set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
-    shift
+    ac_shift=:
+    ;;
+  -*)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
     ;;
-  -*);;
   *) # This is not an option, so the user has probably given explicit
      # arguments.
+     ac_option=$1
      ac_need_defaults=false;;
   esac
 
-  case $1 in
+  case $ac_option in
   # Handling of the options.
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
-    exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
-_ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
   --version | --vers* | -V )
     echo "$ac_cs_version"; exit 0 ;;
   --he | --h)
@@ -10126,13 +10670,16 @@ Try \`$0 --help' for more information." >&2;}
   --debug | --d* | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
-    shift
-    CONFIG_FILES="$CONFIG_FILES $1"
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
     ac_need_defaults=false;;
   --header | --heade | --head | --hea )
-    shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $1"
+    $ac_shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
     ac_need_defaults=false;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
 
   # This is an error.
   -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
@@ -10147,6 +10694,20 @@ Try \`$0 --help' for more information." >&2;}
   shift
 done
 
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
 _ACEOF
 
 
@@ -10184,6 +10745,9 @@ if $ac_need_defaults; then
   test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
 fi
 
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
 # Create a temporary directory, and hook for its removal unless debugging.
 $debug ||
 {
@@ -10192,17 +10756,17 @@ $debug ||
 }
 
 # Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
+
 {
-  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=$TMPDIR/cs$$-$RANDOM
+  tmp=./confstat$$-$RANDOM
   (umask 077 && mkdir $tmp)
 } ||
 {
-   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+   echo "$me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
@@ -10282,19 +10846,22 @@ s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
 s,@STRIP@,$STRIP,;t t
 s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
 s,@CPP@,$CPP,;t t
+s,@EGREP@,$EGREP,;t t
 s,@LIBTOOL@,$LIBTOOL,;t t
 s,@PERL@,$PERL,;t t
 s,@AR@,$AR,;t t
 s,@LT_STATIC_EXEC@,$LT_STATIC_EXEC,;t t
+s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t
+s,@SEARCH@,$SEARCH,;t t
+s,@SETX@,$SETX,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
 /@DEPEND@/r $DEPEND
 s,@DEPEND@,,;t t
-s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t
 /@COMMENCE@/r $COMMENCE
 s,@COMMENCE@,,;t t
 /@CONCLUDE@/r $CONCLUDE
 s,@CONCLUDE@,,;t t
-s,@SEARCH@,$SEARCH,;t t
-s,@SETX@,$SETX,;t t
 CEOF
 
 _ACEOF
@@ -10365,25 +10932,30 @@ echo X"$ac_file" |
   	  /^X\(\/\/\)$/{ s//\1/; q; }
   	  /^X\(\/\).*/{ s//\1/; q; }
   	  s/.*/./; q'`
-  { case "$ac_dir" in
-  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
-  *)                      as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
-  case $as_mkdir_dir in
-    # Skip DOS drivespec
-    ?:) as_incr_dir=$as_mkdir_dir ;;
-    *)
-      as_incr_dir=$as_incr_dir/$as_mkdir_dir
-      test -d "$as_incr_dir" ||
-        mkdir "$as_incr_dir" ||
-	{ { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }
-    ;;
-  esac
-done; }
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
 
   ac_builddir=.
 
@@ -10413,7 +10985,7 @@ esac
 # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
 # absolute.
 ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
 ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
 ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
 
@@ -10514,8 +11086,11 @@ ac_clean_files=$ac_clean_files_save
 # need to make the FD available again.
 if test "$no_create" != yes; then
   ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
   exec 5>/dev/null
-  $SHELL $CONFIG_STATUS || ac_cs_success=false
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
diff --git a/c++/configure.in b/c++/configure.in
index 0f14820..b768d76 100644
--- a/c++/configure.in
+++ b/c++/configure.in
@@ -27,7 +27,7 @@ dnl
 dnl NOTE: Don't forget to change the version number here when we do a
 dnl release!!!
 dnl
-AC_INIT([HDF5 C++], [1.5.61], [hdfhelp@ncsa.uiuc.edu])
+AC_INIT([HDF5 C++], [1.5.62], [hdfhelp@ncsa.uiuc.edu])
 AC_CONFIG_SRCDIR([src/H5Library.cpp])
 AC_CONFIG_AUX_DIR([../bin])