[svn-r2920] Purpose:

        Buglet fix...
Description:
        When configuring, configure would complain about there not being
        a confdefs.h file.
Solution:
        Added a src/H5config.h file which configure can generate. This
        can be used for configure stuff later, but is empty now.
Platforms tested:
	Linux

3 files changed, 164 insertions, 68 deletions

diff --git a/c++/configure b/c++/configure
index d7b64ea..a6f9d39 100755
--- a/c++/configure
+++ b/c++/configure
@@ -633,6 +633,7 @@ else
 fi
 
 
+
 ac_aux_dir=
 for ac_dir in bin $srcdir/bin; do
   if test -f $ac_dir/install-sh; then
@@ -659,7 +660,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:663: checking host system type" >&5
+echo "configure:664: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -682,7 +683,7 @@ echo "$ac_t""$host" 1>&6
 
 
 echo $ac_n "checking shell variables initial values""... $ac_c" 1>&6
-echo "configure:686: checking shell variables initial values" >&5
+echo "configure:687: checking shell variables initial values" >&5
 set >&5
 echo "$ac_t""done" 1>&6
 
@@ -694,7 +695,7 @@ fi
  ROOT=`$pwd`
 
 echo $ac_n "checking for cached host""... $ac_c" 1>&6
-echo "configure:698: checking for cached host" >&5
+echo "configure:699: checking for cached host" >&5
 if eval "test \"`echo '$''{'hdf5_cv_host'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -747,7 +748,7 @@ for f in $host_cpu-$host_vendor-$host_os \
 	 $host_vendor \
 	 $host_cpu ; do
    echo $ac_n "checking for config $f""... $ac_c" 1>&6
-echo "configure:751: checking for config $f" >&5
+echo "configure:752: checking for config $f" >&5
    if test -f $srcdir/config/$f; then
       host_config=$srcdir/config/$f
       echo "$ac_t""found" 1>&6
@@ -765,7 +766,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:769: checking for $ac_word" >&5
+echo "configure:770: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -797,7 +798,7 @@ test -n "$CXX" || CXX="gcc"
 
 
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:801: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:802: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
 
 ac_ext=C
 # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -808,12 +809,12 @@ cross_compiling=$ac_cv_prog_cxx_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 812 "configure"
+#line 813 "configure"
 #include "confdefs.h"
 
 int main(){return(0);}
 EOF
-if { (eval echo configure:817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:818: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cxx_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -839,12 +840,12 @@ if test $ac_cv_prog_cxx_works = no; then
   { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:843: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:844: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
 cross_compiling=$ac_cv_prog_cxx_cross
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:848: checking whether we are using GNU C++" >&5
+echo "configure:849: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -853,7 +854,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:857: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:858: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
@@ -872,7 +873,7 @@ ac_test_CXXFLAGS="${CXXFLAGS+set}"
 ac_save_CXXFLAGS="$CXXFLAGS"
 CXXFLAGS=
 echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:876: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:877: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -904,7 +905,7 @@ else
 fi
 
 echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:908: checking how to run the C++ preprocessor" >&5
+echo "configure:909: checking how to run the C++ preprocessor" >&5
 if test -z "$CXXCPP"; then
 if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -917,12 +918,12 @@ ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftes
 cross_compiling=$ac_cv_prog_cxx_cross
   CXXCPP="${CXX-g++} -E"
   cat > conftest.$ac_ext <<EOF
-#line 921 "configure"
+#line 922 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:926: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:927: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -947,7 +948,7 @@ CXXCPP="$ac_cv_prog_CXXCPP"
 echo "$ac_t""$CXXCPP" 1>&6
 	CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`"
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:951: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:952: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -985,7 +986,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:989: checking for a BSD compatible install" >&5
+echo "configure:990: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1107,7 +1108,7 @@ else
 fi
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1111: checking build system type" >&5
+echo "configure:1112: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -1127,7 +1128,7 @@ echo "$ac_t""$build" 1>&6
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1131: checking for $ac_word" >&5
+echo "configure:1132: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1157,7 +1158,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1161: checking for $ac_word" >&5
+echo "configure:1162: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1187,7 +1188,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1191: checking for $ac_word" >&5
+echo "configure:1192: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1238,7 +1239,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1242: checking for $ac_word" >&5
+echo "configure:1243: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1270,7 +1271,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1274: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1275: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1281,12 +1282,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1285 "configure"
+#line 1286 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1312,12 +1313,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1316: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1317: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1321: checking whether we are using GNU C" >&5
+echo "configure:1322: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1326,7 +1327,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1330: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1331: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1345,7 +1346,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1349: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1350: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1388,7 +1389,7 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1392: checking for ld used by GCC" >&5
+echo "configure:1393: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
     # Accept absolute paths.
@@ -1412,10 +1413,10 @@ echo "configure:1392: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1416: checking for GNU ld" >&5
+echo "configure:1417: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1419: checking for non-GNU ld" >&5
+echo "configure:1420: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1450,7 +1451,7 @@ else
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1454: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1455: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1466,7 +1467,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1470: checking for BSD-compatible nm" >&5
+echo "configure:1471: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1502,7 +1503,7 @@ NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1506: checking whether ln -s works" >&5
+echo "configure:1507: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1551,8 +1552,8 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1555 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1556: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1556 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1557: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1573,19 +1574,19 @@ case "$lt_target" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1577: checking whether the C compiler needs -belf" >&5
+echo "configure:1578: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1582 "configure"
+#line 1583 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1589: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1693,7 +1694,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1697: checking for $ac_word" >&5
+echo "configure:1698: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1728,7 +1729,7 @@ fi
 
 if test -z "$SEARCH"; then
    echo $ac_n "checking how make searches directories""... $ac_c" 1>&6
-echo "configure:1732: checking how make searches directories" >&5
+echo "configure:1733: checking how make searches directories" >&5
    while true; do #for break
             cat >maketest <<EOF
 VPATH=$srcdir/config $srcdir/src $srcdir/bin
@@ -1792,7 +1793,7 @@ EOF
 fi
 
 echo $ac_n "checking if should build only statically linked executables""... $ac_c" 1>&6
-echo "configure:1796: checking if should build only statically linked executables" >&5
+echo "configure:1797: checking if should build only statically linked executables" >&5
 # Check whether --enable-static_exec or --disable-static_exec was given.
 if test "${enable_static_exec+set}" = set; then
   enableval="$enable_static_exec"
@@ -1818,12 +1819,12 @@ cross_compiling=$ac_cv_prog_cxx_cross
 
 
 echo $ac_n "checking if $CXX can handle namespaces""... $ac_c" 1>&6
-echo "configure:1822: checking if $CXX can handle namespaces" >&5
+echo "configure:1823: checking if $CXX can handle namespaces" >&5
 if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 1827 "configure"
+#line 1828 "configure"
 #include "confdefs.h"
 #ifdef __cplusplus
 extern "C" void exit(int);
@@ -1842,7 +1843,7 @@ int main(void) {
 } 
 
 EOF
-if { (eval echo configure:1846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   
 echo yes
@@ -1861,12 +1862,12 @@ fi
 
 
 echo $ac_n "checking if $CXX needs old style header files in includes""... $ac_c" 1>&6
-echo "configure:1865: checking if $CXX needs old style header files in includes" >&5
+echo "configure:1866: checking if $CXX needs old style header files in includes" >&5
 if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 1870 "configure"
+#line 1871 "configure"
 #include "confdefs.h"
 #ifdef __cplusplus
 extern "C" void exit(int);
@@ -1877,7 +1878,7 @@ extern "C" void exit(int);
 int main(void) { return 0; }
 
 EOF
-if { (eval echo configure:1881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1882: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   
 echo no
@@ -1945,7 +1946,7 @@ rm -f confcache
 
 
 echo $ac_n "checking make""... $ac_c" 1>&6
-echo "configure:1949: checking make" >&5
+echo "configure:1950: checking make" >&5
 
 if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\
 	sed -n 1p|cut -c1-8`" = "GNU Make"; then
@@ -1962,7 +1963,7 @@ fi
 
 if test -z "$DEPEND"; then
    echo $ac_n "checking how to include a makefile""... $ac_c" 1>&6
-echo "configure:1966: checking how to include a makefile" >&5
+echo "configure:1967: checking how to include a makefile" >&5
 
       cat >makeinc <<EOF
 foo:
@@ -2025,7 +2026,7 @@ else
     SETX="set -x"
 fi
 
-rm -rf conftest* confdefs* core core.* *.core dummy.o
+rm -f conftest conftest.o conftest.c core core.* *.core dummy.o
 
 
 mkdir ./config >/dev/null 2>&1
@@ -2096,19 +2097,7 @@ fi
 
 trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
+DEFS=-DHAVE_CONFIG_H
 
 # Without the "./", some shells look in PATH for config.status.
 : ${CONFIG_STATUS=./config.status}
@@ -2148,7 +2137,7 @@ ac_given_INSTALL="$INSTALL"
 
 trap 'rm -fr `echo "config/depend1 config/depend2 config/depend3 config/depend4	\
 	  config/dependN config/commence config/conclude Makefile	\
-	  src/Makefile test/Makefile examples/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+	  src/Makefile test/Makefile examples/Makefile src/H5config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
@@ -2314,6 +2303,113 @@ s%@INSTALL@%$INSTALL%g
 fi; done
 rm -f conftest.s*
 
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_uB='\([ 	]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="src/H5config.h"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  echo creating $ac_file
+
+  rm -f conftest.frag conftest.in conftest.out
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h.  And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+  ac_lines=`grep -c . conftest.vals`
+  # grep -c gives empty output for an empty file on some AIX systems.
+  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+  # Write a limited-size here document to conftest.frag.
+  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+  echo 'CEOF
+  sed -f conftest.frag conftest.in > conftest.out
+  rm -f conftest.in
+  mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+  rm -f conftest.vals
+  mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+  rm -f conftest.frag conftest.h
+  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
+  cat conftest.in >> conftest.h
+  rm -f conftest.in
+  if cmp -s $ac_file conftest.h 2>/dev/null; then
+    echo "$ac_file is unchanged"
+    rm -f conftest.h
+  else
+    # Remove last slash and all that follows it.  Not all systems have dirname.
+      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+      # The file is in a subdirectory.
+      test ! -d "$ac_dir" && mkdir "$ac_dir"
+    fi
+    rm -f $ac_file
+    mv conftest.h $ac_file
+  fi
+fi; done
+
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
diff --git a/c++/configure.in b/c++/configure.in
index 18bf836..0b61bc4 100644
--- a/c++/configure.in
+++ b/c++/configure.in
@@ -10,7 +10,7 @@ dnl Initialize configure.
 dnl
 AC_REVISION($Id$)
 AC_INIT(src/H5Library.C)
-dnl AC_CONFIG_HEADER(config.h)
+AC_CONFIG_HEADER(src/H5config.h)
 AC_CONFIG_AUX_DIR(bin)
 AC_CANONICAL_HOST
 AC_SUBST(CPPFLAGS)
@@ -366,7 +366,7 @@ else
 fi
 
 dnl Some cleanup stuff
-rm -rf conftest* confdefs* core core.* *.core dummy.o
+rm -f conftest conftest.o conftest.c core core.* *.core dummy.o
 
 dnl Build config.status, touch the stamp files, and build all the Makefiles.
 dnl The order is such that the first `make' does not need to update any
diff --git a/c++/src/H5config.h.in b/c++/src/H5config.h.in
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/c++/src/H5config.h.in