[svn-r11303] Purpose:

minor tidy up.

Description:
Changed both test programs and test scripts to use the same suffixes
(.chkexe and .chklog).  Changed from .log to .chklog to avoid running
into potential conflicts by other "things" (e.g., config.log).

Tested:
Heping.

4 files changed, 60 insertions, 98 deletions

diff --git a/c++/Makefile.in b/c++/Makefile.in
index 1886259..9493d61 100644
--- a/c++/Makefile.in
+++ b/c++/Makefile.in
@@ -280,19 +280,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 @BUILD_CXX_CONDITIONAL_TRUE@SUBDIRS = src test
 DIST_SUBDIRS = src test examples
 
@@ -310,8 +300,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-recursive
 
 .SUFFIXES:
@@ -720,7 +710,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -751,16 +741,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -777,8 +767,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -814,7 +804,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in
index 6f07a84..356ae90 100644
--- a/c++/examples/Makefile.in
+++ b/c++/examples/Makefile.in
@@ -272,21 +272,13 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
 
 # These are the files that 'make clean' (and derivatives) will remove from this
 # directory.  Since automake doesn't know about the examples, we need to
 # tell it to clean the example programs, too.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
-	$(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
-	$(TEST_PROG_CHKEXE:.chkexe_=.log) \
-	$(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) *.chksh *.logsh *.h5
+CHECK_CLEANFILES = *.chkexe *.chklog *.h5
 
 # Use h5c++ to build examples, instead of reguar C++ compiler
 H5CPP = $(bindir)/h5c++
@@ -326,8 +318,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -617,7 +609,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -648,16 +640,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -674,8 +666,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -711,7 +703,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in
index 78b3824..1a27dbe 100644
--- a/c++/src/Makefile.in
+++ b/c++/src/Makefile.in
@@ -314,19 +314,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 
 # Include src directory
 INCLUDES = -I$(top_srcdir)/src
@@ -380,8 +370,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -806,7 +796,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -837,16 +827,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -863,8 +853,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -900,7 +890,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in
index 21ab43e..b47de55 100644
--- a/c++/test/Makefile.in
+++ b/c++/test/Makefile.in
@@ -303,19 +303,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 
 # Include src, test, and c++/src directories
 INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/c++/src
@@ -349,8 +339,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -694,7 +684,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -725,16 +715,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -751,8 +741,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -788,7 +778,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false