[svn-r21702] remove obsolete cmake config module - exists in cmake 2.8.6

1 files changed, 0 insertions, 364 deletions

diff --git a/config/cmake/FindMPI.cmake b/config/cmake/FindMPI.cmake
deleted file mode 100644
index 555d2d5..0000000
--- a/config/cmake/FindMPI.cmake
+++ /dev/null
@@ -1,364 +0,0 @@
-# - Message Passing Interface (MPI) module.
-#
-# The Message Passing Interface (MPI) is a library used to write
-# high-performance parallel applications that use message passing, and
-# is typically deployed on a cluster. MPI is a standard interface
-# (defined by the MPI forum) for which many implementations are
-# available. All of these implementations have somewhat different
-# compilation approaches (different include paths, libraries to link
-# against, etc.), and this module tries to smooth out those differences.
-#
-# This module will set the following variables:
-#   MPI_FOUND                  TRUE if we have found MPI
-#   MPI_COMPILE_FLAGS          Compilation flags for MPI programs
-#   MPI_INCLUDE_PATH           Include path(s) for MPI header
-#   MPI_LINK_FLAGS             Linking flags for MPI programs
-#   MPI_LIBRARY                First MPI library to link against (cached)
-#   MPI_EXTRA_LIBRARY          Extra MPI libraries to link against (cached)
-#   MPI_LIBRARIES              All libraries to link MPI programs against
-#   MPIEXEC                    Executable for running MPI programs
-#   MPIEXEC_NUMPROC_FLAG       Flag to pass to MPIEXEC before giving it the
-#                              number of processors to run on
-#   MPIEXEC_PREFLAGS           Flags to pass to MPIEXEC directly before the
-#                              executable to run.
-#   MPIEXEC_POSTFLAGS          Flags to pass to MPIEXEC after all other flags.
-#
-# This module will attempt to auto-detect these settings, first by
-# looking for a MPI compiler, which many MPI implementations provide
-# as a pass-through to the native compiler to simplify the compilation
-# of MPI programs. The MPI compiler is stored in the cache variable
-# MPI_COMPILER, and will attempt to look for commonly-named drivers
-# mpic++, mpicxx, mpiCC, or mpicc. If the compiler driver is found and
-# recognized, it will be used to set all of the module variables. To
-# skip this auto-detection, set MPI_LIBRARY and MPI_INCLUDE_PATH in
-# the CMake cache.
-#
-# If no compiler driver is found or the compiler driver is not
-# recognized, this module will then search for common include paths
-# and library names to try to detect MPI.
-#
-# If CMake initially finds a different MPI than was intended, and you
-# want to use the MPI compiler auto-detection for a different MPI
-# implementation, set MPI_COMPILER to the MPI compiler driver you want
-# to use (e.g., mpicxx) and then set MPI_LIBRARY to the string
-# MPI_LIBRARY-NOTFOUND. When you re-configure, auto-detection of MPI
-# will run again with the newly-specified MPI_COMPILER.
-#
-# When using MPIEXEC to execute MPI applications, you should typically
-# use all of the MPIEXEC flags as follows:
-#   ${MPIEXEC} ${MPIEXEC_NUMPROC_FLAG} PROCS ${MPIEXEC_PREFLAGS} EXECUTABLE
-#     ${MPIEXEC_POSTFLAGS} ARGS
-# where PROCS is the number of processors on which to execute the program,
-# EXECUTABLE is the MPI program, and ARGS are the arguments to pass to the
-# MPI program.
-
-#=============================================================================
-# Copyright 2001-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distributed this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is maintained by David Partyka <dave.partyka@kitware.com>.
-
-# A set of directories to search through in addition to the standard system paths
-# that find_program will search through.
-# Microsoft HPC SDK is automatically added to the system path
-# Argonne National Labs MPICH2 sets a registry key that we can use.
-
-set(_MPI_PACKAGE_DIR
-  mpi
-  mpich
-  openmpi
-  lib/mpi
-  lib/mpich
-  lib/openmpi
-  "MPICH/SDK"
-  "Microsoft Compute Cluster Pack"
-  )
-
-set(_MPI_PREFIX_PATH)
-if(WIN32)
-  list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH\\SMPD;binary]/..")
-  list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH2;Path]")
-endif()
-
-foreach(SystemPrefixDir ${CMAKE_SYSTEM_PREFIX_PATH})
-  foreach(MpiPackageDir ${_MPI_PREFIX_PATH})
-    if(EXISTS ${SystemPrefixDir}/${MpiPackageDir})
-      list(APPEND _MPI_PREFIX_PATH "${SystemPrefixDir}/${MpiPackageDir}")
-    endif()
-  endforeach(MpiPackageDir)
-endforeach(SystemPrefixDir)
-
-# Most mpi distros have some form of mpiexec which gives us something we can reliably look for.
-find_program(MPIEXEC
-  NAMES mpiexec mpirun lamexec
-  PATHS ${_MPI_PREFIX_PATH}
-  PATH_SUFFIXES bin
-  DOC "Executable for running MPI programs."
-  )
-
-# call get_filename_component twice to remove mpiexec and the directory it exists in (typically bin).
-# This gives us a fairly reliable base directory to search for /bin /lib and /include from.
-get_filename_component(_MPI_BASE_DIR "${MPIEXEC}" PATH)
-get_filename_component(_MPI_BASE_DIR "${_MPI_BASE_DIR}" PATH)
-
-# If there is an mpi compiler find it and interogate (farther below) it for the include
-# and lib dirs otherwise we will continue to search from ${_MPI_BASE_DIR}.
-find_program(MPI_COMPILER
-  NAMES mpiCC mpicc mpic++ mpicxx
-  HINTS "${_MPI_BASE_DIR}"
-  PATH_SUFFIXES bin
-  DOC "MPI compiler. Used only to detect MPI compilation flags.")
-mark_as_advanced(MPI_COMPILER)
-
-set(MPIEXEC_NUMPROC_FLAG "-np" CACHE STRING "Flag used by MPI to specify the number of processes for MPIEXEC; the next option will be the number of processes.")
-set(MPIEXEC_PREFLAGS "" CACHE STRING "These flags will be directly before the executable that is being run by MPIEXEC.")
-set(MPIEXEC_POSTFLAGS "" CACHE STRING "These flags will come after all flags given to MPIEXEC.")
-set(MPIEXEC_MAX_NUMPROCS "2" CACHE STRING "Maximum number of processors available to run MPI applications.")
-mark_as_advanced(MPIEXEC MPIEXEC_NUMPROC_FLAG MPIEXEC_PREFLAGS
-  MPIEXEC_POSTFLAGS MPIEXEC_MAX_NUMPROCS)
-
-if (MPI_INCLUDE_PATH AND MPI_LIBRARY)
-  # Do nothing: we already have MPI_INCLUDE_PATH and MPI_LIBRARY in
-  # the cache, and we don't want to override those settings.
-elseif (MPI_COMPILER)
-  # Check whether the -showme:compile option works. This indicates
-  # that we have either Open MPI or a newer version of LAM-MPI, and
-  # implies that -showme:link will also work.
-  # Note that Windows distros do not have an mpi compiler to interogate.
-  exec_program(${MPI_COMPILER}
-    ARGS -showme:compile
-    OUTPUT_VARIABLE MPI_COMPILE_CMDLINE
-    RETURN_VALUE MPI_COMPILER_RETURN)
-
-  if (MPI_COMPILER_RETURN EQUAL 0)
-    # If we appear to have -showme:compile, then we should also have
-    # -showme:link. Try it.
-    exec_program(${MPI_COMPILER}
-      ARGS -showme:link
-      OUTPUT_VARIABLE MPI_LINK_CMDLINE
-      RETURN_VALUE MPI_COMPILER_RETURN)
-
-    # Note that we probably have -showme:incdirs and -showme:libdirs
-    # as well.
-    set(MPI_COMPILER_MAY_HAVE_INCLIBDIRS TRUE)
-  endif (MPI_COMPILER_RETURN EQUAL 0)
-
-  if (MPI_COMPILER_RETURN EQUAL 0)
-    # Do nothing: we have our command lines now
-  else (MPI_COMPILER_RETURN EQUAL 0)
-    # Older versions of LAM-MPI have "-showme". Try it.
-    exec_program(${MPI_COMPILER}
-      ARGS -showme
-      OUTPUT_VARIABLE MPI_COMPILE_CMDLINE
-      RETURN_VALUE MPI_COMPILER_RETURN)
-  endif (MPI_COMPILER_RETURN EQUAL 0)
-
-  if (MPI_COMPILER_RETURN EQUAL 0)
-    # Do nothing: we have our command lines now
-  else (MPI_COMPILER_RETURN EQUAL 0)
-    # MPICH uses "-show". Try it.
-    exec_program(${MPI_COMPILER}
-      ARGS -show
-      OUTPUT_VARIABLE MPI_COMPILE_CMDLINE
-      RETURN_VALUE MPI_COMPILER_RETURN)
-  endif (MPI_COMPILER_RETURN EQUAL 0)
-
-  if (MPI_COMPILER_RETURN EQUAL 0)
-    # We have our command lines, but we might need to copy
-    # MPI_COMPILE_CMDLINE into MPI_LINK_CMDLINE, if the underlying
-    if (NOT MPI_LINK_CMDLINE)
-      SET(MPI_LINK_CMDLINE ${MPI_COMPILE_CMDLINE})
-    endif (NOT MPI_LINK_CMDLINE)
-  else (MPI_COMPILER_RETURN EQUAL 0)
-    message(STATUS "Unable to determine MPI from MPI driver ${MPI_COMPILER}")
-  endif (MPI_COMPILER_RETURN EQUAL 0)
-endif (MPI_INCLUDE_PATH AND MPI_LIBRARY)
-
-if (MPI_INCLUDE_PATH AND MPI_LIBRARY)
-  # Do nothing: we already have MPI_INCLUDE_PATH and MPI_LIBRARY in
-  # the cache, and we don't want to override those settings.
-elseif (MPI_COMPILE_CMDLINE)
-  # Extract compile flags from the compile command line.
-  string(REGEX MATCHALL "-D([^\" ]+|\"[^\"]+\")" MPI_ALL_COMPILE_FLAGS "${MPI_COMPILE_CMDLINE}")
-  set(MPI_COMPILE_FLAGS_WORK)
-  foreach(FLAG ${MPI_ALL_COMPILE_FLAGS})
-    if (MPI_COMPILE_FLAGS_WORK)
-      set(MPI_COMPILE_FLAGS_WORK "${MPI_COMPILE_FLAGS_WORK} ${FLAG}")
-    else(MPI_COMPILE_FLAGS_WORK)
-      set(MPI_COMPILE_FLAGS_WORK ${FLAG})
-    endif(MPI_COMPILE_FLAGS_WORK)
-  endforeach(FLAG)
-
-  # Extract include paths from compile command line
-  string(REGEX MATCHALL "-I([^\" ]+|\"[^\"]+\")" MPI_ALL_INCLUDE_PATHS "${MPI_COMPILE_CMDLINE}")
-  set(MPI_INCLUDE_PATH_WORK)
-  foreach(IPATH ${MPI_ALL_INCLUDE_PATHS})
-    string(REGEX REPLACE "^-I" "" IPATH ${IPATH})
-    string(REGEX REPLACE "//" "/" IPATH ${IPATH})
-    list(APPEND MPI_INCLUDE_PATH_WORK ${IPATH})
-  endforeach(IPATH)
-
-  if (NOT MPI_INCLUDE_PATH_WORK)
-    if (MPI_COMPILER_MAY_HAVE_INCLIBDIRS)
-      # The compile command line didn't have any include paths on it,
-      # but we may have -showme:incdirs. Use it.
-      exec_program(${MPI_COMPILER}
-        ARGS -showme:incdirs
-        OUTPUT_VARIABLE MPI_INCLUDE_PATH_WORK
-        RETURN_VALUE MPI_COMPILER_RETURN)
-      separate_arguments(MPI_INCLUDE_PATH_WORK)
-    endif (MPI_COMPILER_MAY_HAVE_INCLIBDIRS)
-  endif (NOT MPI_INCLUDE_PATH_WORK)
-
-  if (NOT MPI_INCLUDE_PATH_WORK)
-    # If all else fails, just search for mpi.h in the normal include
-    # paths.
-    find_path(MPI_INCLUDE_PATH mpi.h
-  HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
-  PATH_SUFFIXES include
-    )
-    set(MPI_INCLUDE_PATH_WORK ${MPI_INCLUDE_PATH})
-  endif (NOT MPI_INCLUDE_PATH_WORK)
-
-  # Extract linker paths from the link command line
-  string(REGEX MATCHALL "-L([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_PATHS "${MPI_LINK_CMDLINE}")
-  set(MPI_LINK_PATH)
-  foreach(LPATH ${MPI_ALL_LINK_PATHS})
-    string(REGEX REPLACE "^-L" "" LPATH ${LPATH})
-    string(REGEX REPLACE "//" "/" LPATH ${LPATH})
-    list(APPEND MPI_LINK_PATH ${LPATH})
-  endforeach(LPATH)
-
-  if (NOT MPI_LINK_PATH)
-    if (MPI_COMPILER_MAY_HAVE_INCLIBDIRS)
-      # The compile command line didn't have any linking paths on it,
-      # but we may have -showme:libdirs. Use it.
-      exec_program(${MPI_COMPILER}
-        ARGS -showme:libdirs
-        OUTPUT_VARIABLE MPI_LINK_PATH
-        RETURN_VALUE MPI_COMPILER_RETURN)
-      separate_arguments(MPI_LINK_PATH)
-    endif (MPI_COMPILER_MAY_HAVE_INCLIBDIRS)
-  endif (NOT MPI_LINK_PATH)
-
-  # Extract linker flags from the link command line
-  string(REGEX MATCHALL "-Wl,([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_FLAGS "${MPI_LINK_CMDLINE}")
-  set(MPI_LINK_FLAGS_WORK)
-  foreach(FLAG ${MPI_ALL_LINK_FLAGS})
-    if (MPI_LINK_FLAGS_WORK)
-      set(MPI_LINK_FLAGS_WORK "${MPI_LINK_FLAGS_WORK} ${FLAG}")
-    else(MPI_LINK_FLAGS_WORK)
-      set(MPI_LINK_FLAGS_WORK ${FLAG})
-    endif(MPI_LINK_FLAGS_WORK)
-  endforeach(FLAG)
-
-  # Extract the set of libraries to link against from the link command
-  # line
-  string(REGEX MATCHALL "-l([^\" ]+|\"[^\"]+\")" MPI_LIBNAMES "${MPI_LINK_CMDLINE}")
-
-  # Determine full path names for all of the libraries that one needs
-  # to link against in an MPI program
-  set(MPI_LIBRARIES)
-  foreach(LIB ${MPI_LIBNAMES})
-    string(REGEX REPLACE "^-l" "" LIB ${LIB})
-    set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
-    find_library(MPI_LIB ${LIB} HINTS ${MPI_LINK_PATH})
-    if (MPI_LIB)
-      list(APPEND MPI_LIBRARIES ${MPI_LIB})
-    else (MPI_LIB)
-      message(SEND_ERROR "Unable to find MPI library ${LIB}")
-    endif (MPI_LIB)
-  endforeach(LIB)
-  set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE INTERNAL "Scratch variable for MPI detection" FORCE)
-
-  # Chop MPI_LIBRARIES into the old-style MPI_LIBRARY and
-  # MPI_EXTRA_LIBRARY.
-  list(LENGTH MPI_LIBRARIES MPI_NUMLIBS)
-  list(LENGTH MPI_LIBNAMES MPI_NUMLIBS_EXPECTED)
-  if (MPI_NUMLIBS EQUAL MPI_NUMLIBS_EXPECTED)
-    list(GET MPI_LIBRARIES 0 MPI_LIBRARY_WORK)
-    set(MPI_LIBRARY ${MPI_LIBRARY_WORK} CACHE FILEPATH "MPI library to link against" FORCE)
-  else (MPI_NUMLIBS EQUAL MPI_NUMLIBS_EXPECTED)
-    set(MPI_LIBRARY "MPI_LIBRARY-NOTFOUND" CACHE FILEPATH "MPI library to link against" FORCE)
-  endif (MPI_NUMLIBS EQUAL MPI_NUMLIBS_EXPECTED)
-  if (MPI_NUMLIBS GREATER 1)
-    set(MPI_EXTRA_LIBRARY_WORK ${MPI_LIBRARIES})
-    list(REMOVE_AT MPI_EXTRA_LIBRARY_WORK 0)
-    set(MPI_EXTRA_LIBRARY ${MPI_EXTRA_LIBRARY_WORK} CACHE STRING "Extra MPI libraries to link against" FORCE)
-  else (MPI_NUMLIBS GREATER 1)
-    set(MPI_EXTRA_LIBRARY "MPI_EXTRA_LIBRARY-NOTFOUND" CACHE STRING "Extra MPI libraries to link against" FORCE)
-  endif (MPI_NUMLIBS GREATER 1)
-
-  # Set up all of the appropriate cache entries
-  set(MPI_COMPILE_FLAGS ${MPI_COMPILE_FLAGS_WORK} CACHE STRING "MPI compilation flags" FORCE)
-  set(MPI_INCLUDE_PATH ${MPI_INCLUDE_PATH_WORK} CACHE STRING "MPI include path" FORCE)
-  set(MPI_LINK_FLAGS ${MPI_LINK_FLAGS_WORK} CACHE STRING "MPI linking flags" FORCE)
-else (MPI_COMPILE_CMDLINE)
-# No MPI compiler to interogate so attempt to find everything with find functions.
-  find_path(MPI_INCLUDE_PATH mpi.h
-    HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
-    PATH_SUFFIXES include
-    )
-
-  # Decide between 32-bit and 64-bit libraries for Microsoft's MPI
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL 8)
-    set(MS_MPI_ARCH_DIR amd64)
-  else()
-    set(MS_MPI_ARCH_DIR i386)
-  endif()
-
-  find_library(MPI_LIBRARY
-    NAMES mpi mpich msmpi
-    HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
-    PATH_SUFFIXES lib lib/${MS_MPI_ARCH_DIR} Lib Lib/${MS_MPI_ARCH_DIR}
-    )
-
-  find_library(MPI_EXTRA_LIBRARY
-    NAMES mpi++
-    HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
-    PATH_SUFFIXES lib
-    DOC "Extra MPI libraries to link against.")
-
-  set(MPI_COMPILE_FLAGS "" CACHE STRING "MPI compilation flags")
-  set(MPI_LINK_FLAGS "" CACHE STRING "MPI linking flags")
-endif (MPI_INCLUDE_PATH AND MPI_LIBRARY)
-
-# on BlueGene/L the MPI lib is named libmpich.rts.a, there also these additional libs are required
-if("${MPI_LIBRARY}" MATCHES "mpich.rts")
-   set(MPI_EXTRA_LIBRARY ${MPI_EXTRA_LIBRARY} msglayer.rts devices.rts rts.rts devices.rts)
-   set(MPI_LIBRARY ${MPI_LIBRARY}  msglayer.rts devices.rts rts.rts devices.rts)
-endif("${MPI_LIBRARY}" MATCHES "mpich.rts")
-
-# Set up extra variables to conform to
-if (MPI_EXTRA_LIBRARY)
-  set(MPI_LIBRARIES ${MPI_LIBRARY} ${MPI_EXTRA_LIBRARY})
-else (MPI_EXTRA_LIBRARY)
-  set(MPI_LIBRARIES ${MPI_LIBRARY})
-endif (MPI_EXTRA_LIBRARY)
-
-if (MPI_INCLUDE_PATH AND MPI_LIBRARY)
-  set(MPI_FOUND TRUE)
-else (MPI_INCLUDE_PATH AND MPI_LIBRARY)
-  set(MPI_FOUND FALSE)
-endif (MPI_INCLUDE_PATH AND MPI_LIBRARY)
-
-include(FindPackageHandleStandardArgs)
-# handle the QUIETLY and REQUIRED arguments
-find_package_handle_standard_args(MPI DEFAULT_MSG MPI_LIBRARY MPI_INCLUDE_PATH)
-
-mark_as_advanced(MPI_INCLUDE_PATH MPI_COMPILE_FLAGS MPI_LINK_FLAGS MPI_LIBRARY
-  MPI_EXTRA_LIBRARY)
-
-# unset to cleanup namespace
-unset(_MPI_PACKAGE_DIR)
-unset(_MPI_PREFIX_PATH)
-unset(_MPI_BASE_DIR)