[svn-r1112] Changes since 19990301

----------------------

./INSTALL
	Reorganized and added some additional examples.

./MANIFEST
./aclocal.m4			[NEW]
./configure.in
./configure			[REGENERATED]
./src/H5config.h.in		[REGENERATED]
./bin/ltconfig			[NEW]
./bin/ltmain.sh			[NEW]
	Added tests to determine how to compile shared libraries and
	how to link programs with them before the libraries are
	installed.  Also how to install and uninstall shared
	libraries. The configure step also prints the names of the
	config files it's trying to load for easier debugging.

./bin/config.guess
./bin/config.sub
	Replaced with a newer version from GNU.  The changes we made
	to that file to report `irix6.x' and `FreeBSD' without version
	numbers have been incorporated into configure.in instead.  In
	the future, do not change these two files (see the top of
	configure.in instead). By the way, this update was required to
	get shared libraries working.

./config/linux			[REMOVED]
./config/linux-gnulibc1		[NEW]
./config/linux-gnu		[NEW]
./config/alpha-dec		[REMOVED]
./config/alpha-dec-osf4.0	[REMOVED]
./config/dec-osf4.x		[NEW]
./config/irix5.3		[REMOVED]
./config/irix5.x		[NEW]
./config/irix64			[REMOVED]
./config/freebsd
	Moved config files around to agree with output from the new
	config.guess.  The linux file was split into gnu (RedHat),
	gnulibc1, and gnulibc2 versions. The alpha-dec file was
	removed (I think it was unused) and the alpha-dec-osf4.0 was
	changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
	the irix64 file was renamed to irix6.x. The freebsd file was
	changed to point to linux-gnulibc1. These changes were tested
	on:

		Linux 2.0
		Linux 2.1
		FreeBSD 3.2
		Irix 5.3
		Irix64 6.2
		Irix64 6.4
		HP/UX 10.20
		OSF1 4.0

./config/alphaev56-dec-osf4.x
./config/irix64
	Added warnings similar to linux/freebsd about using compilers
	with known bugs.

./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
	Added definitions for shared libraries. This has been tested
	on the following systems:

		Linux 2.0
		Linux 2.1
		FreeBSD 3.2
		Irix 5.3
		Irix64 6.2
		Irix64 6.4
		HP/UX 10.20		static only
		OSF1 4.0

	If you want to disable use of shared libraries (you probably
	do for development purposes since it takes a lot longer to
	compile and because you have to run dynamically linked
	programs in a special way if the library hasn't been
	installed) then add `--disable-shared' to the configure
	command line.  This is all documented in the INSTALL file.

./bin/release
	Temprarily commented out the MANIFEST checking when running
	under svf since svf is about to be replaced by a newer
	version.  This change only affects error checking during the
	release process.

./Makefile.dist
./Makefile.in
	Added `make check' which does the same thing as `make _test'
	since the former is endorsed by the GNU coding style and
	people are used to it.  The old `make _test' still works too
	(and so does `make test' if you use GNU make).

1 files changed, 19 insertions, 12 deletions

diff --git a/config/conclude.in b/config/conclude.in
index b39fb96..3740080 100644
--- a/config/conclude.in
+++ b/config/conclude.in
@@ -9,8 +9,7 @@
 #
 lib: $(LIB)
 $(LIB) __no_library__: $(LIB_OBJ)
-	$(AR) -rc $@ $(LIB_OBJ)
-	$(RANLIB) $@
+	@$(LT_LINK_LIB) -o $@ $(CFLAGS) $(LIB_OBJ) $(LIBS)
 
 progs: $(LIB) $(PROGS)
 
@@ -21,7 +20,7 @@ TAGS: $(LIB_SRC)
 
 # Runs each test in order, passing $(TEST_FLAGS) to the program.
 tests: $(TEST_PROGS) $(LIB)
-test _test: tests
+check test _test: tests
 	@for test in $(TEST_PROGS) dummy; do                                  \
 	   if test $$test != dummy; then				      \
 	      echo "============================";			      \
@@ -46,7 +45,7 @@ install: $(LIB) $(PUB_HDR) $(PROGS)
 	@test -d $(libdir) || mkdir $(libdir)
 	@for f in X $(LIB); do						      \
 	   if test $$f != X; then					      \
-	      (set -x; $(INSTALL_DATA) $$f $(libdir)/. || exit 1);	      \
+	      ($(LT_INSTALL_LIB) $$f $(libdir)/. || exit 1);		      \
 	   fi;								      \
 	done
 	@test -d $(includedir) || mkdir $(includedir)
@@ -58,34 +57,39 @@ install: $(LIB) $(PUB_HDR) $(PROGS)
 	@test -d $(bindir) || mkdir $(bindir)
 	@for f in X $(PROGS); do					      \
 	   if test $$f != X; then					      \
-	     (set -x; $(INSTALL_PROGRAM) $$f $(bindir)/. || exit 1);	      \
+	     ($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1);		      \
 	   fi;							              \
 	done
 
 # Removes those things that `make install' (would have) installed.
 uninstall:
 	@if test "X$(LIB)" != X; then					      \
-           set -x; cd $(libdir) && $(RM) $(LIB);			      \
+	   for f in $(LIB); do						      \
+	      $(LT_UNINSTALL) $(libdir)/$$f;				      \
+	   done;							      \
 	fi
-	@if test "X$(PUBHDR)" != X; then				      \
+	@if test "X$(PUB_HDR)" != X; then				      \
 	   set -x; cd $(includedir) && $(RM) $(PUB_HDR);		      \
 	fi
 	@if test "X$(PROGS)" != X; then					      \
-	   set -x; cd $(bindir) && $(RM) $(PROGS);			      \
+	   for f in $(PROGS); do					      \
+	      $(LT_UNINSTALL) $(bindir)/$$f;				      \
+	   done;							      \
 	fi
 
 # Removes temporary files without removing the final target files.  That is,
 # remove things like object files but not libraries or executables.
 #
 mostlyclean:
-	$(RM) $(LIB_OBJ) $(TEST_OBJ) $(PROG_OBJ) $(MOSTLYCLEAN)
+	-$(RM) $(LIB_OBJ) $(TEST_OBJ) $(PROG_OBJ) $(MOSTLYCLEAN)
 
 # Like `mostlyclean' except it also removes the final targets: things like
 # libraries and executables.  This target doesn't remove any file that
 # is part of the HDF5 distribution.
 #
 clean: mostlyclean
-	$(RM) $(LIB) $(TEST_PROGS) $(PROGS) $(CLEAN)
+	-$(RM) $(LIB) $(TEST_PROGS) $(PROGS) $(CLEAN)
+	-$(RM) -r .libs
 
 # Like `clean' except it also removes files that were created by running
 # configure.  If you've unpacked the source and built HDF5 without creating
@@ -93,7 +97,7 @@ clean: mostlyclean
 # in the distribution.
 #
 distclean: clean
-	$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN)
+	-$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN)
 	@if test -f Makefile.in; then					      \
 	   (set -x; $(RM) Makefile);					      \
 	fi
@@ -102,12 +106,15 @@ distclean: clean
 # the makefile, including those generated from autoheader and autoconf.
 #
 maintainer-clean: distclean
-	$(RM) *~ core core.* *.core *.bak *.contrib gmon.out
+	-$(RM) *~ core core.* *.core *.bak *.contrib gmon.out
 
 # Implicit rules
 .c.o:
 	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
 
+.c.lo:
+	@$(LT_COMPILE) $(CFLAGS) $(CPPFLAGS) -c $<
+
 #------------------------------------------------------------------------------
 # The following section of this makefile contains dependencies between the
 # source files and the header files.  If GNU make and GCC are being used then