[svn-r27680] Merge of r27675, 27641, and 27645 from trunk

- Changes AC_CONFIG_HEADER to AC_CONFIG_HEADERS

- Removes nsl and socket library checks on Solaris (no longer needed)

- Removes obsolete and/or unmaintained configuration files from config/

Fixes HDFFV-9284, HDFFV-9118, HDFFV-9116

Tested on: h5committest

1 files changed, 0 insertions, 198 deletions

diff --git a/config/craynv b/config/craynv
deleted file mode 100644
index 479d5c8..0000000
--- a/config/craynv
+++ /dev/null
@@ -1,198 +0,0 @@
-#                                                      -*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-# Disabling Dependency Tracking
-# ---------------------
-#
-# The Cray X1 machines that The HDF Group tests on seem to have trouble doing
-# dependency tracking (probably because they use Cray's C++ compiler,
-# which autoconf may not recognize).  Until this is fixed by autoconf
-# or a user complains, disable dependency tracking on Crays.
-enable_dependency_tracking="no"
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS         Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS       library suitable for use with debugging
-#                      tools. Usually this list will exclude
-#                      optimization switches (like `-O') and include
-#                      switches that turn on symbolic debugging
-#                      support (like `-g').
-#
-# PROD_CFLAGS          Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS     library suitable for performance testing (like 
-#                      `-pg').  This may or may not include debugging 
-#                      or production flags.
-#                      
-# H5_CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to H5_CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-# AM_CFLAGS             Flags added directly into this variable will
-#                       be propogated to the compiler wrapper scripts (h5cc,
-#                       h5c++, et cetera) in addition to being used to compile 
-#                       the library.
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-    gcc)
-       H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions
-       DEBUG_CFLAGS="-g -fverbose-asm"
-       DEBUG_CPPFLAGS=
-       PROD_CFLAGS="-O3 -fomit-frame-pointer"
-       PROD_CPPFLAGS=
-       PROFILE_CFLAGS="-pg"
-       PROFILE_CPPFLAGS=
-       ;;
-
-    cc)
-       H5_CFLAGS="$H5_CFLAGS" 
-       DEBUG_CFLAGS="-g"
-       DEBUG_CPPFLAGS=
-       PROD_CFLAGS=""
-       PROD_CPPFLAGS=
-       PROFILE_CFLAGS=
-       PROFILE_CPPFLAGS=
-       ;;
-
-    *)
-       H5_CFLAGS="$H5_CFLAGS -ansi"
-       DEBUG_CFLAGS="-g"
-       DEBUG_CPPFLAGS=
-       PROD_CFLAGS="-O"
-       PROD_CPPFLAGS=
-       PROFILE_CFLAGS="-pg"
-       PROFILE_CPPFLAGS=
-       ;;
-esac
-
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# Hard set the flag to indicate that converting denormalized floating-point
-# values doesn't work.
-hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'}
-
-# The default Fortran 90 compiler
-
-if test "X-" = "X-$F9X"; then
-    F9X=ftn
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    # -Wl passes flags to the linker and -M# will ignore warnings with
-    # number#. Warning 405 and 412 were stopping the executable from
-    # being built.
-    # The -em flag enables .mod files, which is what HDF5 builds.
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    H5_FCFLAGS="$H5_FCFLAGS -em"
-    DEBUG_FCFLAGS="-g"
-    PROD_FCFLAGS=""
-    PROFILE_FCFLAGS=""
-    f9x_flags_set=yes
-fi
-
-# The default C++ compiler
-
-if test -z "$CXX"; then
-    CXX="CC"
-    CXX_BASENAME=CC
-fi
-
-case $CXX_BASENAME in
-    g++)
-       H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions
-       DEBUG_CXXFLAGS="-g -fverbose-asm"
-       DEBUG_CPPFLAGS=
-       PROD_CXXFLAGS="-O3 -fomit-frame-pointer"
-       PROD_CPPFLAGS=
-       PROFILE_CXXFLAGS="-pg"
-       PROFILE_CPPFLAGS=
-       ;;
-
-    *)
-       H5_CXXFLAGS="$H5_CXXFLAGS" 
-       DEBUG_CXXFLAGS="-g"
-       DEBUG_CPPFLAGS=
-       PROD_CXXFLAGS=""
-       PROD_CPPFLAGS=
-       PROFILE_CXXFLAGS=
-       PROFILE_CPPFLAGS=
-       ;;
-esac
-