[svn-r19592] Bug fix: since the addition of

    RUNSERIAL=${RUNSERIAL="env LDR_CNTRL=MAXDATA=0x20000000@DSA"}
kind of mess things up for the parallel HDF5 configure.
Changed it to 
    RUNSERIAL=${RUNSERIAL="env LDR_CNTRL=MAXDATA=0x20000000@DSA MP_PROCS=1 MP_TASKS_PER_NODE=1 poe"}
if --enable-parallel.

Also merge powerpc-ibm-aix5.x with ibm-aix by making powerpc-ibm-aix5.x to
source ibm-aix just like ibm-aix6.x.  This is in preparation that all AIX
platforms will eventually just use ibm-aix directly.

Fixed a small problme in ibm-flags: some older xlc (e.g. v7.1) prints the
version information with a leading blank. So, accommodate this pattern by
removing the "^".

Tested: LLNL uP, 32/64bits, serial/parallel. (parallel has tests failed
but this change is mainily for configure issues.)
Also tested BP, 32/64bits but serial only.

1 files changed, 2 insertions, 149 deletions

diff --git a/config/powerpc-ibm-aix5.x b/config/powerpc-ibm-aix5.x
index b39fb47..50a4e8c 100644
--- a/config/powerpc-ibm-aix5.x
+++ b/config/powerpc-ibm-aix5.x
@@ -1,7 +1,6 @@
 #							-*- shell-script -*-
 #
 # Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
 # All rights reserved.
 #
 # This file is part of HDF5.  The full HDF5 copyright notice, including
@@ -18,151 +17,5 @@
 # after configure starts and defines, among other things, flags for
 # the various compile modes.
 
-# Use AIX supplied C compiler by default, xlc for serial, mpcc_r for parallel.
-# Make sure this is applied to other API compile options such as C++.
-if test "X-" =  "X-$CC"; then
-  if test "X-$enable_parallel" = "X-yes"; then
-    CC=mpcc_r
-    CC_BASENAME=mpcc_r
-  else
-    CC=xlc
-    CC_BASENAME=xlc
-  fi
-fi
-
-# Define RUNPARALLEL if parallel mode is enabled or a parallel compiler used.
-if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpcc_r; then
-    RUNPARALLEL=${RUNPARALLEL="env MP_PROCS=\$\${NPROCS:=3} MP_TASKS_PER_NODE=\$\${NPROCS:=3} poe"}
-fi
-
-# Temporary patch for Bug 1678. -q32 binary default to run with smaller memory.
-# Ask for more memory so that "make check" will pass. Not necessary for -q64
-# mode but it does no harm.
-RUNSERIAL=${RUNSERIAL="env LDR_CNTRL=MAXDATA=0x20000000@DSA"}
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-
-case $CC_BASENAME in
-  xlc|xlc-*|mpcc_r|mpcc_r-*)
-    # Turn off shared lib option.  It causes some test suite to fail.
-    enable_shared="${enable_shared:-no}"
-    # Make sure this is applied to other API compile options such as C++.
-    AM_CFLAGS="$AM_CFLAGS"
-    H5_CFLAGS="-qlanglvl=stdc99 $H5_CFLAGS"
-    DEBUG_CFLAGS="-g -qfullpath"
-    DEBUG_CPPFLAGS=
-    # -O causes test/dtypes to fail badly. Turn it off for now.
-    PROD_CFLAGS=""
-    PROD_CPPFLAGS=
-    PROFILE_CFLAGS="-g -qfullpath -pg"
-    PROFILE_CPPFLAGS=
-    ;;
-
-  gcc)
-    . $srcdir/config/gnu-flags
-    ;;
-
-  *)
-    H5_CFLAGS="$H5_CFLAGS -ansi"
-    DEBUG_CFLAGS="-g"
-    DEBUG_CPPFLAGS=
-    PROD_CFLAGS="-O"
-    PROD_CPPFLAGS=
-    PROFILE_CFLAGS="-pg"
-    PROFILE_CPPFLAGS=
-    ;;
-esac
-
-#----------------------------------------------------------------------------
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-ac_cv_header_stdc=${ac_cv_header_stdc='yes'}
-ac_cv_header_sys_ioctl_h=${ac_cv_header_sys_ioctl_h=yes}
-
-# cache the sizeof of "standard C types" so that configure can run faster.
-ac_cv_sizeof_char=${ac_cv_sizeof_char=1}
-ac_cv_sizeof_short=${ac_cv_sizeof_short=2}
-ac_cv_sizeof_int=${ac_cv_sizeof_int=4}
-ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long=8}
-ac_cv_sizeof___int64=${ac_cv_sizeof___int64=8}
-ac_cv_sizeof_float=${ac_cv_sizeof_float=4}
-ac_cv_sizeof_double=${ac_cv_sizeof_double=8}
-ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double=8}
-ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t=1}
-ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t=1}
-ac_cv_sizeof_int_least8_t=${ac_cv_sizeof_int_least8_t=1}
-ac_cv_sizeof_uint_least8_t=${ac_cv_sizeof_uint_least8_t=1}
-# Do not cache int_fast8_t since the vendor changes often.
-ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t=2}
-ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t=2}
-ac_cv_sizeof_int_least16_t=${ac_cv_sizeof_int_least16_t=2}
-ac_cv_sizeof_uint_least16_t=${ac_cv_sizeof_uint_least16_t=2}
-# Do not cache int_fast16_t since the vendor changes often.
-ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t=4}
-ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t=4}
-ac_cv_sizeof_int_least32_t=${ac_cv_sizeof_int_least32_t=4}
-ac_cv_sizeof_uint_least32_t=${ac_cv_sizeof_uint_least32_t=4}
-ac_cv_sizeof_int_fast32_t=${ac_cv_sizeof_int_fast32_t=4}
-ac_cv_sizeof_uint_fast32_t=${ac_cv_sizeof_uint_fast32_t=4}
-ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t=8}
-ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t=8}
-ac_cv_sizeof_int_least64_t=${ac_cv_sizeof_int_least64_t=8}
-ac_cv_sizeof_uint_least64_t=${ac_cv_sizeof_uint_least64_t=8}
-ac_cv_sizeof_int_fast64_t=${ac_cv_sizeof_int_fast64_t=8}
-ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t=8}
-
-# Don't cache long since it varies between 32 and 64 bits
-#ac_cv_sizeof_long=${ac_cv_sizeof_long=4}
-
-# The default Fortran 90 compiler
-
-if test "X-" = "X-$FC"; then
-  if test "X-$enable_parallel" = "X-yes"; then
-    FC=mpxlf90_r
-  else
-    FC=xlf90
-  fi
-fi
-
-# While we try to avoid setting FCFLAGS directly for use in compilation, in 
-# this case we need the -k flag present for some configure checks. As such, 
-# the configure script saves the user's set FCFLAGS before running, and 
-# restores them when complete. We must then set up both FCFLAGS and H5_FCFLAGS 
-# to ensure the flag is present for both configure as well as for the build.
-if test "X-" = "X-$f9x_flags_set"; then
-  F9XSUFFIXFLAG="-qsuffix=f=f90"
-  FCFLAGS="$FCFLAGS -O ${F9XSUFFIXFLAG}"
-  H5_FCFLAGS="$H5_FCFLAGS -O ${F9XSUFFIXFLAG}"
-  FSEARCH_DIRS="-I./ -I../src"
-  DEBUG_FCFLAGS="-O"
-  PROD_FCFLAGS="-O"
-  PROFILE_FCFLAGS="-O"
-  f9x_flags_set=yes
-fi
-
-# With poe version 3.2.0.19 or lower(using lpp -l all | grep ppe.poe to check the version number, 
-# IBM MPI-IO implementation has a bug, 
-#it cannot generate correct MPI derived datatype. Please uncomment the following line:
-#hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'}
-
-# The default C++ compiler
-
-# Use AIX supplied C++ compiler by default.
-CXX=${CXX=xlC}
-
-# Added -qweaksymbol to suppress linker messages warning of duplicate
-# symbols; these warnings are harmless. - BMR
-H5_CXXFLAGS="$H5_CXXFLAGS -qweaksymbol"
-AM_CXXFLAGS="$AM_CXXFLAGS"
-
-
+# Use the generic ibm-aix.
+. $srcdir/config/ibm-aix