diff options
author | Larry Knox <lrknox@hdfgroup.org> | 2020-10-16 22:47:27 (GMT) |
---|---|---|
committer | Larry Knox <lrknox@hdfgroup.org> | 2020-10-16 22:47:27 (GMT) |
commit | db30c2da68ece4a155e9e50c28ec16d6057509b2 (patch) | |
tree | 1d36f673c36dfee71c266bba39511da21ecc782e /config/sanitizer/code-coverage.cmake | |
parent | 5b9cf732caab9daa6ed1e00f2df4f5a792340196 (diff) | |
parent | 2e2b87d1cbdee3b919e6e5cba6c5ecd1b9434434 (diff) | |
download | hdf5-db30c2da68ece4a155e9e50c28ec16d6057509b2.zip hdf5-db30c2da68ece4a155e9e50c28ec16d6057509b2.tar.gz hdf5-db30c2da68ece4a155e9e50c28ec16d6057509b2.tar.bz2 |
Merge HDF5 1.10.7 release files into 1.10/masterhdf5-1_10_7
Diffstat (limited to 'config/sanitizer/code-coverage.cmake')
-rw-r--r-- | config/sanitizer/code-coverage.cmake | 536 |
1 files changed, 536 insertions, 0 deletions
diff --git a/config/sanitizer/code-coverage.cmake b/config/sanitizer/code-coverage.cmake new file mode 100644 index 0000000..8d765f7 --- /dev/null +++ b/config/sanitizer/code-coverage.cmake @@ -0,0 +1,536 @@ +# +# Copyright (C) 2018 by George Cave - gcave@stablecoder.ca +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. + +# USAGE: To enable any code coverage instrumentation/targets, the single CMake +# option of `CODE_COVERAGE` needs to be set to 'ON', either by GUI, ccmake, or +# on the command line. +# +# From this point, there are two primary methods for adding instrumentation to +# targets: 1 - A blanket instrumentation by calling `add_code_coverage()`, where +# all targets in that directory and all subdirectories are automatically +# instrumented. 2 - Per-target instrumentation by calling +# `target_code_coverage(<TARGET_NAME>)`, where the target is given and thus only +# that target is instrumented. This applies to both libraries and executables. +# +# To add coverage targets, such as calling `make ccov` to generate the actual +# coverage information for perusal or consumption, call +# `target_code_coverage(<TARGET_NAME>)` on an *executable* target. +# +# Example 1: All targets instrumented +# +# In this case, the coverage information reported will will be that of the +# `theLib` library target and `theExe` executable. +# +# 1a: Via global command +# +# ~~~ +# add_code_coverage() # Adds instrumentation to all targets +# +# add_library(theLib lib.cpp) +# +# add_executable(theExe main.cpp) +# target_link_libraries(theExe PRIVATE theLib) +# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target (instrumentation already added via global anyways) for generating code coverage reports. +# ~~~ +# +# 1b: Via target commands +# +# ~~~ +# add_library(theLib lib.cpp) +# target_code_coverage(theLib) # As a library target, adds coverage instrumentation but no targets. +# +# add_executable(theExe main.cpp) +# target_link_libraries(theExe PRIVATE theLib) +# target_code_coverage(theExe) # As an executable target, adds the 'ccov-theExe' target and instrumentation for generating code coverage reports. +# ~~~ +# +# Example 2: Target instrumented, but with regex pattern of files to be excluded +# from report +# +# ~~~ +# add_executable(theExe main.cpp non_covered.cpp) +# target_code_coverage(theExe EXCLUDE non_covered.cpp test/*) # As an executable target, the reports will exclude the non-covered.cpp file, and any files in a test/ folder. +# ~~~ +# +# Example 3: Target added to the 'ccov' and 'ccov-all' targets +# +# ~~~ +# add_code_coverage_all_targets(EXCLUDE test/*) # Adds the 'ccov-all' target set and sets it to exclude all files in test/ folders. +# +# add_executable(theExe main.cpp non_covered.cpp) +# target_code_coverage(theExe AUTO ALL EXCLUDE non_covered.cpp test/*) # As an executable target, adds to the 'ccov' and ccov-all' targets, and the reports will exclude the non-covered.cpp file, and any files in a test/ folder. +# ~~~ + +# Options +option( + CODE_COVERAGE + "Builds targets with code coverage instrumentation. (Requires GCC or Clang)" + OFF) + +# Programs +find_program(LLVM_COV_PATH llvm-cov) +find_program(LLVM_PROFDATA_PATH llvm-profdata) +find_program(LCOV_PATH lcov) +find_program(GENHTML_PATH genhtml) + +# Variables +set(CMAKE_COVERAGE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/ccov) + +# Common initialization/checks +if(CODE_COVERAGE AND NOT CODE_COVERAGE_ADDED) + set(CODE_COVERAGE_ADDED ON) + + # Common Targets + add_custom_target( + ccov-preprocessing + COMMAND ${CMAKE_COMMAND} -E make_directory + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY} + DEPENDS ccov-clean) + + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + # Messages + message(STATUS "Building with llvm Code Coverage Tools") + + if(NOT LLVM_COV_PATH) + message(FATAL_ERROR "llvm-cov not found! Aborting.") + else() + # Version number checking for 'EXCLUDE' compatibility + execute_process(COMMAND ${LLVM_COV_PATH} --version + OUTPUT_VARIABLE LLVM_COV_VERSION_CALL_OUTPUT) + string(REGEX MATCH "[0-9]+\\.[0-9]+\\.[0-9]+" LLVM_COV_VERSION + ${LLVM_COV_VERSION_CALL_OUTPUT}) + + if(LLVM_COV_VERSION VERSION_LESS "7.0.0") + message( + WARNING + "target_code_coverage()/add_code_coverage_all_targets() 'EXCLUDE' option only available on llvm-cov >= 7.0.0" + ) + endif() + endif() + + # Targets + add_custom_target( + ccov-clean + COMMAND rm -f ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list + COMMAND rm -f ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list) + + # Used to get the shared object file list before doing the main all- + # processing + add_custom_target( + ccov-libs + COMMAND ; + COMMENT "libs ready for coverage report.") + + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + # Messages + message(STATUS "Building with lcov Code Coverage Tools") + + if(CMAKE_BUILD_TYPE) + string(TOUPPER ${CMAKE_BUILD_TYPE} upper_build_type) + if(NOT ${upper_build_type} STREQUAL "DEBUG") + message( + WARNING + "Code coverage results with an optimized (non-Debug) build may be misleading" + ) + endif() + else() + message( + WARNING + "Code coverage results with an optimized (non-Debug) build may be misleading" + ) + endif() + if(NOT LCOV_PATH) + message(FATAL_ERROR "lcov not found! Aborting...") + endif() + if(NOT GENHTML_PATH) + message(FATAL_ERROR "genhtml not found! Aborting...") + endif() + + # Targets + add_custom_target(ccov-clean COMMAND ${LCOV_PATH} --directory + ${CMAKE_BINARY_DIR} --zerocounters) + + else() + set(CODE_COVERAGE_ADDED OFF) + message(STATUS "Code coverage requires Clang or GCC.(${CMAKE_C_COMPILER_ID})") + endif() +endif() + +# Adds code coverage instrumentation to a library, or instrumentation/targets +# for an executable target. +# ~~~ +# EXECUTABLE ADDED TARGETS: +# GCOV/LCOV: +# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. +# ccov-${TARGET_NAME} : Generates HTML code coverage report for the associated named target. +# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. +# +# LLVM-COV: +# ccov : Generates HTML code coverage report for every target added with 'AUTO' parameter. +# ccov-report : Generates HTML code coverage report for every target added with 'AUTO' parameter. +# ccov-${TARGET_NAME} : Generates HTML code coverage report. +# ccov-report-${TARGET_NAME} : Prints to command line summary per-file coverage information. +# ccov-show-${TARGET_NAME} : Prints to command line detailed per-line coverage information. +# ccov-all : Generates HTML code coverage report, merging every target added with 'ALL' parameter into a single detailed report. +# ccov-all-report : Prints summary per-file coverage information for every target added with ALL' parameter to the command line. +# +# Required: +# TARGET_NAME - Name of the target to generate code coverage for. +# Optional: +# AUTO - Adds the target to the 'ccov' target so that it can be run in a batch with others easily. Effective on executable targets. +# ALL - Adds the target to the 'ccov-all' and 'ccov-all-report' targets, which merge several executable targets coverage data to a single report. Effective on executable targets. +# EXTERNAL - For GCC's lcov, allows the profiling of 'external' files from the processing directory +# EXCLUDE <REGEX_PATTERNS> - Excludes files of the patterns provided from coverage. **These do not copy to the 'all' targets.** +# OBJECTS <TARGETS> - For executables ONLY, if the provided targets are shared libraries, adds coverage information to the output +# ~~~ +function(target_code_coverage TARGET_NAME) + # Argument parsing + set(options AUTO ALL EXTERNAL) + set(multi_value_keywords EXCLUDE OBJECTS) + cmake_parse_arguments(target_code_coverage "${options}" "" + "${multi_value_keywords}" ${ARGN}) + + if(CODE_COVERAGE) + + # Add code coverage instrumentation to the target's linker command + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + target_compile_options(${TARGET_NAME} PRIVATE -fprofile-instr-generate + -fcoverage-mapping) + set_property( + TARGET ${TARGET_NAME} + APPEND_STRING + PROPERTY LINK_FLAGS "-fprofile-instr-generate ") + set_property( + TARGET ${TARGET_NAME} + APPEND_STRING + PROPERTY LINK_FLAGS "-fcoverage-mapping ") + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + target_compile_options(${TARGET_NAME} PRIVATE -fprofile-arcs + -ftest-coverage) + target_link_libraries(${TARGET_NAME} PRIVATE gcov) + endif() + + # Targets + get_target_property(target_type ${TARGET_NAME} TYPE) + + # Add shared library to processing for 'all' targets + if(target_type STREQUAL "SHARED_LIBRARY" AND target_code_coverage_ALL) + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + add_custom_target( + ccov-run-${TARGET_NAME} + COMMAND echo "-object=$<TARGET_FILE:${TARGET_NAME}>" >> + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list + DEPENDS ccov-preprocessing ${TARGET_NAME}) + + if(NOT TARGET ccov-libs) + message( + FATAL_ERROR + "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'." + ) + endif() + + add_dependencies(ccov-libs ccov-run-${TARGET_NAME}) + endif() + endif() + + # For executables add targets to run and produce output + if(target_type STREQUAL "EXECUTABLE") + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "(Apple)?Cc]lang") + + # If there are shared objects to also work with, generate the string to + # add them here + foreach(SO_TARGET ${target_code_coverage_OBJECTS}) + # Check to see if the target is a shared object + if(TARGET ${SO_TARGET}) + get_target_property(SO_TARGET_TYPE ${SO_TARGET} TYPE) + if(${SO_TARGET_TYPE} STREQUAL "SHARED_LIBRARY") + set(SO_OBJECTS ${SO_OBJECTS} -object=$<TARGET_FILE:${SO_TARGET}>) + endif() + endif() + endforeach() + + # Run the executable, generating raw profile data + add_custom_target( + ccov-run-${TARGET_NAME} + COMMAND LLVM_PROFILE_FILE=${TARGET_NAME}.profraw + $<TARGET_FILE:${TARGET_NAME}> + COMMAND echo "-object=$<TARGET_FILE:${TARGET_NAME}>" >> + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list + COMMAND echo "${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}.profraw " >> + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list + DEPENDS ccov-preprocessing ccov-libs ${TARGET_NAME}) + + # Merge the generated profile data so llvm-cov can process it + add_custom_target( + ccov-processing-${TARGET_NAME} + COMMAND ${LLVM_PROFDATA_PATH} merge -sparse ${TARGET_NAME}.profraw -o + ${TARGET_NAME}.profdata + DEPENDS ccov-run-${TARGET_NAME}) + + # Ignore regex only works on LLVM >= 7 + if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0") + foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} + -ignore-filename-regex='${EXCLUDE_ITEM}') + endforeach() + endif() + + # Print out details of the coverage information to the command line + add_custom_target( + ccov-show-${TARGET_NAME} + COMMAND + ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}> ${SO_OBJECTS} + -instr-profile=${TARGET_NAME}.profdata -show-line-counts-or-regions + ${EXCLUDE_REGEX} + DEPENDS ccov-processing-${TARGET_NAME}) + + # Print out a summary of the coverage information to the command line + add_custom_target( + ccov-report-${TARGET_NAME} + COMMAND ${LLVM_COV_PATH} report $<TARGET_FILE:${TARGET_NAME}> + ${SO_OBJECTS} -instr-profile=${TARGET_NAME}.profdata + ${EXCLUDE_REGEX} + DEPENDS ccov-processing-${TARGET_NAME}) + + # Generates HTML output of the coverage information for perusal + add_custom_target( + ccov-${TARGET_NAME} + COMMAND + ${LLVM_COV_PATH} show $<TARGET_FILE:${TARGET_NAME}> ${SO_OBJECTS} + -instr-profile=${TARGET_NAME}.profdata -show-line-counts-or-regions + -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME} + -format="html" ${EXCLUDE_REGEX} + DEPENDS ccov-processing-${TARGET_NAME}) + + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + set(COVERAGE_INFO + "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}.info") + + # Run the executable, generating coverage information + add_custom_target( + ccov-run-${TARGET_NAME} + COMMAND $<TARGET_FILE:${TARGET_NAME}> + DEPENDS ccov-preprocessing ${TARGET_NAME}) + + # Generate exclusion string for use + foreach(EXCLUDE_ITEM ${target_code_coverage_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO} + '${EXCLUDE_ITEM}') + endforeach() + + if(EXCLUDE_REGEX) + set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file + ${COVERAGE_INFO}) + else() + set(EXCLUDE_COMMAND ;) + endif() + + if(NOT ${target_code_coverage_EXTERNAL}) + set(EXTERNAL_OPTION --no-external) + endif() + + # Capture coverage data + add_custom_target( + ccov-capture-${TARGET_NAME} + COMMAND ${CMAKE_COMMAND} -E remove ${COVERAGE_INFO} + COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --zerocounters + COMMAND $<TARGET_FILE:${TARGET_NAME}> + COMMAND + ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --base-directory + ${CMAKE_SOURCE_DIR} --capture ${EXTERNAL_OPTION} --output-file + ${COVERAGE_INFO} + COMMAND ${EXCLUDE_COMMAND} + DEPENDS ccov-preprocessing ${TARGET_NAME}) + + # Generates HTML output of the coverage information for perusal + add_custom_target( + ccov-${TARGET_NAME} + COMMAND ${GENHTML_PATH} -o + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME} + ${COVERAGE_INFO} + DEPENDS ccov-capture-${TARGET_NAME}) + endif() + + add_custom_command( + TARGET ccov-${TARGET_NAME} + POST_BUILD + COMMAND ; + COMMENT + "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/${TARGET_NAME}/index.html in your browser to view the coverage report." + ) + + # AUTO + if(target_code_coverage_AUTO) + if(NOT TARGET ccov) + add_custom_target(ccov) + endif() + add_dependencies(ccov ccov-${TARGET_NAME}) + + if(NOT CMAKE_COMPILER_IS_GNUCXX) + if(NOT TARGET ccov-report) + add_custom_target(ccov-report) + endif() + add_dependencies(ccov-report ccov-report-${TARGET_NAME}) + endif() + endif() + + # ALL + if(target_code_coverage_ALL) + if(NOT TARGET ccov-all-processing) + message( + FATAL_ERROR + "Calling target_code_coverage with 'ALL' must be after a call to 'add_code_coverage_all_targets'." + ) + endif() + + add_dependencies(ccov-all-processing ccov-run-${TARGET_NAME}) + endif() + endif() + endif() +endfunction() + +# Adds code coverage instrumentation to all targets in the current directory and +# any subdirectories. To add coverage instrumentation to only specific targets, +# use `target_code_coverage`. +function(add_code_coverage) + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + add_compile_options(-fprofile-instr-generate -fcoverage-mapping) + add_link_options(-fprofile-instr-generate -fcoverage-mapping) + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + add_compile_options(-fprofile-arcs -ftest-coverage) + link_libraries(gcov) + endif() +endfunction() + +# Adds the 'ccov-all' type targets that calls all targets added via +# `target_code_coverage` with the `ALL` parameter, but merges all the coverage +# data from them into a single large report instead of the numerous smaller +# reports. Also adds the ccov-all-capture Generates an all-merged.info file, for +# use with coverage dashboards (e.g. codecov.io, coveralls). +# ~~~ +# Optional: +# EXCLUDE <REGEX_PATTERNS> - Excludes files of the regex patterns provided from coverage. +# ~~~ +function(add_code_coverage_all_targets) + # Argument parsing + set(multi_value_keywords EXCLUDE) + cmake_parse_arguments(add_code_coverage_all_targets "" "" + "${multi_value_keywords}" ${ARGN}) + + if(CODE_COVERAGE) + if(CMAKE_C_COMPILER_ID MATCHES "[Cc]lang" + OR CMAKE_CXX_COMPILER_ID MATCHES "[Cc]lang") + + # Merge the profile data for all of the run executables + add_custom_target( + ccov-all-processing + COMMAND + ${LLVM_PROFDATA_PATH} merge -o + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata -sparse `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/profraw.list`) + + # Regex exclude only available for LLVM >= 7 + if(LLVM_COV_VERSION VERSION_GREATER_EQUAL "7.0.0") + foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} + -ignore-filename-regex='${EXCLUDE_ITEM}') + endforeach() + endif() + + # Print summary of the code coverage information to the command line + add_custom_target( + ccov-all-report + COMMAND + ${LLVM_COV_PATH} report `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list` + -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata + ${EXCLUDE_REGEX} + DEPENDS ccov-all-processing) + + # Export coverage information so continuous integration tools (e.g. + # Jenkins) can consume it + add_custom_target( + ccov-all-export + COMMAND + ${LLVM_COV_PATH} export `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list` + -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata + -format="text" ${EXCLUDE_REGEX} > + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/coverage.json + DEPENDS ccov-all-processing) + + # Generate HTML output of all added targets for perusal + add_custom_target( + ccov-all + COMMAND + ${LLVM_COV_PATH} show `cat + ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/binaries.list` + -instr-profile=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.profdata + -show-line-counts-or-regions + -output-dir=${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged + -format="html" ${EXCLUDE_REGEX} + DEPENDS ccov-all-processing) + + elseif(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "GNU") + set(COVERAGE_INFO "${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged.info") + + # Nothing required for gcov + add_custom_target(ccov-all-processing COMMAND ;) + + # Exclusion regex string creation + foreach(EXCLUDE_ITEM ${add_code_coverage_all_targets_EXCLUDE}) + set(EXCLUDE_REGEX ${EXCLUDE_REGEX} --remove ${COVERAGE_INFO} + '${EXCLUDE_ITEM}') + endforeach() + + if(EXCLUDE_REGEX) + set(EXCLUDE_COMMAND ${LCOV_PATH} ${EXCLUDE_REGEX} --output-file + ${COVERAGE_INFO}) + else() + set(EXCLUDE_COMMAND ;) + endif() + + # Capture coverage data + add_custom_target( + ccov-all-capture + COMMAND ${CMAKE_COMMAND} -E remove ${COVERAGE_INFO} + COMMAND ${LCOV_PATH} --directory ${CMAKE_BINARY_DIR} --capture + --output-file ${COVERAGE_INFO} + COMMAND ${EXCLUDE_COMMAND} + DEPENDS ccov-all-processing) + + # Generates HTML output of all targets for perusal + add_custom_target( + ccov-all + COMMAND ${GENHTML_PATH} -o ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged + ${COVERAGE_INFO} + DEPENDS ccov-all-capture) + + endif() + + add_custom_command( + TARGET ccov-all + POST_BUILD + COMMAND ; + COMMENT + "Open ${CMAKE_COVERAGE_OUTPUT_DIRECTORY}/all-merged/index.html in your browser to view the coverage report." + ) + endif() +endfunction() |