[svn-r26605] Description:

    Bring r26503 & r26528 from autotools_rework branch back to the trunk:

    Remove old platform configure files: craynv, dec-flags, hpux11.23,
ia64-linux-gnu, nec-superux14.1, sv1-cray, x86_64-redstorm-linux-gnu

   Also remove CONVERT_DENORMAL_FLOAT, since this was only set in the
configure files being removed.

Tested on:
    Linux/32 2.6.18 (jam) w/serial & parallel
    (Daily tested on branch for 2+ days)

1 files changed, 0 insertions, 199 deletions

diff --git a/config/sv1-cray b/config/sv1-cray
deleted file mode 100644
index 1bae48d..0000000
--- a/config/sv1-cray
+++ /dev/null
@@ -1,199 +0,0 @@
-#							-*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-  CC=cc
-  CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS		Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS	library suitable for use with debugging
-#			tools. Usually this list will exclude
-#			optimization switches (like `-O') and include
-#			switches that turn on symbolic debugging
-#			support (like `-g').
-#
-# PROD_CFLAGS		Flags to pass to the compiler to create a
-# PROD_CPPFLAGS		production version of the library.  These
-#			usualy exclude symbolic debugging switches
-#			(like `-g') and include optimization switches
-#			(like `-O').
-#
-# PROFILE_CFLAGS	Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS	library suitable for performance testing (like 
-# 			`-pg').  This may or may not include debugging 
-# 			or production flags.
-#
-# H5_CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to H5_CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-# AM_CFLAGS             Flags added directly into this variable will
-#                       be propogated to the compiler wrapper scripts (h5cc,
-#                       h5c++, et cetera) in addition to being used to compile 
-#                       the library.
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-  gcc)
-    H5_CFLAGS="$H5_CFLAGS -Wsign-compare" #Only works for some versions
-    DEBUG_CFLAGS="-g -fverbose-asm"
-    DEBUG_CPPFLAGS=
-    PROD_CFLAGS="-O3 -fomit-frame-pointer"
-    PROD_CPPFLAGS=
-    PROFILE_CFLAGS="-pg"
-    PROFILE_CPPFLAGS=
-    ;;
-
-  cc)
-    H5_CFLAGS="$H5_CFLAGS"
-    DEBUG_CFLAGS="-g -h zero"
-    DEBUG_CPPFLAGS=
-    PROD_CFLAGS="-O2 -h scalar0 -h vector0 -h task1"
-    PROD_CPPFLAGS=
-    PROFILE_CFLAGS="-pg"
-    PROFILE_CPPFLAGS=
-    ;;
-
-  *)
-    H5_CFLAGS="$H5_CFLAGS -ansi"
-    DEBUG_CFLAGS="-g"
-    DEBUG_CPPFLAGS=
-    PROD_CFLAGS="-O"
-    PROD_CPPFLAGS=
-    PROFILE_CFLAGS="-pg"
-    PROFILE_CPPFLAGS=
-    ;;
-esac
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# Hard set the flag to indicate that converting denormalized floating-point
-# values doesn't work.
-hdf5_cv_convert_denormal_float=${hdf5_cv_convert_denormal_float='no'}
-
-# The default Fortran 90 compiler
-
-if test "X-" = "X-$FC"; then
-  FC=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-  F9XSUFFIXFLAG=""
-  FSEARCH_DIRS=""
-  H5_FCFLAGS="$H5_FCFLAGS -dp"
-  DEBUG_FCFLAGS="-dp"
-  PROD_FCFLAGS="-dp"
-  PROFILE_FCFLAGS="-dp"
-  f9x_flags_set=yes
-fi
-
-# The default C++ compiler
-
-if test -z "$CXX"; then
-  CXX="CC"
-  CXX_BASENAME=CC
-fi
-
-
-case $CXX_BASENAME in
-  g++)
-    H5_CXXFLAGS="$H5_CXXFLAGS -Wsign-compare" #Only works for some versions
-    DEBUG_CXXFLAGS="-g -fverbose-asm"
-    DEBUG_CPPFLAGS=
-    PROD_CXXFLAGS="-O3 -fomit-frame-pointer"
-    PROD_CPPFLAGS=
-    PROFILE_CXXFLAGS="-pg"
-    PROFILE_CPPFLAGS=
-    ;;
-
-  *)
-    H5_CXXFLAGS="$H5_CXXFLAGS -h instantiate=used"
-    DEBUG_CXXFLAGS="-g"
-    DEBUG_CPPFLAGS=
-    PROD_CXXFLAGS="-O"
-    PROD_CPPFLAGS=
-    PROFILE_CXXFLAGS="-pg"
-    PROFILE_CPPFLAGS=
-    ;;
-esac