[svn-r17654] Purpose:

    Configure cache-val cleanup

Description:

    Corrected some misnamed cache values in configure / config files.

Tested:

    h5committest

7 files changed, 24 insertions, 24 deletions

diff --git a/config/ia64-linux-gnu b/config/ia64-linux-gnu
index a0b3945..1961119 100644
--- a/config/ia64-linux-gnu
+++ b/config/ia64-linux-gnu
@@ -146,8 +146,8 @@ esac
 # Check MPICH settings
 . $srcdir/config/mpich
 #Uncomment the next line if your system doesn't support MPI complex derived datatype.
-#hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'}
+#hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'}
 #Comment out the following line if your system supports collective IO when some processes
 #don't have any contributions to IOs.
-hdf5_mpi_special_collective_io_works=${hdf5_mpi_special_collective_io_works='no'}
+hdf5_cv_mpi_special_collective_io_works=${hdf5_cv_mpi_special_collective_io_works='no'}
 
diff --git a/config/irix6.x b/config/irix6.x
index 1f5bbee..9bd9c4c 100644
--- a/config/irix6.x
+++ b/config/irix6.x
@@ -176,18 +176,18 @@ hdf5_cv_integer_to_ldouble_accurate=${hdf5_cv_integer_to_ldouble_accurate='no'}
 # Versions 7.4.2m or newer work.
 # Up to version 7.4.4m, it cannot handle collective IO with non-contribution 
 # of some processes.
-# Fix $hdf5_mpi_complex_derived_datatype_works if it is not set and is using cc.
-if [ -z "$hdf5_mpi_complex_derived_datatype_works" -a $CC_BASENAME = cc ]; then
+# Fix $hdf5_cv_mpi_complex_derived_datatype_works if it is not set and is using cc.
+if [ -z "$hdf5_cv_mpi_complex_derived_datatype_works" -a $CC_BASENAME = cc ]; then
     ccversion=`$CC -version 2>&1 | sed -e 's/.*Version //p'`
     ccversion1=`echo $ccversion | cut -f1 -d.`
     ccversion2=`echo $ccversion | cut -f2 -d.`
     # Assume all versions 7.4.* or newer are okay
     # and assume ccversion2 is never larger than 99.
     ccversionval=`expr $ccversion1 \* 100 + $ccversion2`
-    hdf5_mpi_special_collective_io_works='no'
+    hdf5_cv_mpi_special_collective_io_works='no'
     if [ $ccversionval -lt 704 ]; then
-        hdf5_mpi_complex_derived_datatype_works='no'
-#        hdf5_mpi_special_collective_io_works='no'
+        hdf5_cv_mpi_complex_derived_datatype_works='no'
+#        hdf5_cv_mpi_special_collective_io_works='no'
     fi
 fi
 
diff --git a/config/linux-gnulibc1 b/config/linux-gnulibc1
index 8c64734..667f04e 100644
--- a/config/linux-gnulibc1
+++ b/config/linux-gnulibc1
@@ -122,12 +122,12 @@ fi
 #     1. collective I/O when some processes don't have any contributions;
 #     2. complex derived MPI data type.
 if test $CC_BASENAME = cmpicc; then
-  hdf5_mpi_special_collective_io_works=${hdf5_mpi_special_collective_io_works='no'}
-  hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'}
+  hdf5_cv_mpi_special_collective_io_works=${hdf5_cv_mpi_special_collective_io_works='no'}
+  hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'}
 fi
 
 #Comment out the following line if your system supports collective IO when some processes
 #don't have any contributions to IOs.
-hdf5_mpi_special_collective_io_works=${hdf5_mpi_special_collective_io_works='no'}
-hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'}
+hdf5_cv_mpi_special_collective_io_works=${hdf5_cv_mpi_special_collective_io_works='no'}
+hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'}
 
diff --git a/config/mpich b/config/mpich
index 1ba62ff..575859e 100644
--- a/config/mpich
+++ b/config/mpich
@@ -21,14 +21,14 @@
 # We know that mpich 1.2.4 and 1.2.5 do not support it correctly.  We assume
 # older versions do not work either.  We don't know of a way of testing its
 # correctness without the risk of hanging the configure process.  So, we
-# set the configure variable hdf5_mpi_complex_derived_datatype_works to no.
+# set the configure variable hdf5_cv_mpi_complex_derived_datatype_works to no.
 # Notice that this code works only if the mpicc compiler shows its $MPIVERSION
 # properly.  It is confirmed mpicc does that as far back as v1.2.3.
 
 # mpich2 do not support it correctly.  But mpich2 reports small version number
 # indistiguishable from mpich.  Some mpich2 reports blank, some reports 1.0.2.
 
-if [ -z "$hdf5_mpi_complex_derived_datatype_works" ]; then
+if [ -z "$hdf5_cv_mpi_complex_derived_datatype_works" ]; then
     ccversion=`$CC -v 2>/dev/null`
     # mpich compiler will give "mpicc for 1.2.x ..."
     if echo "$ccversion" | grep '^mpicc for' > /dev/null ; then
@@ -36,16 +36,16 @@ if [ -z "$hdf5_mpi_complex_derived_datatype_works" ]; then
         ccversion=`echo $ccversion | cut -f3 -d' '`
 	case "$ccversion" in
 	    1.2.[0-5]*)
-		hdf5_mpi_complex_derived_datatype_works='no'
+		hdf5_cv_mpi_complex_derived_datatype_works='no'
 		;;
 	    1.0.2)
 		# mpich2 is recycling the version number, some report
 		# 1.0.2, some report blank.
-		hdf5_mpi_complex_derived_datatype_works='no'
+		hdf5_cv_mpi_complex_derived_datatype_works='no'
 		;;
 	    "")
 		# got blank ccversion.  Assume it is bad a mpich2.
-		hdf5_mpi_complex_derived_datatype_works='no'
+		hdf5_cv_mpi_complex_derived_datatype_works='no'
 		;;
 	    *)
 		# assume okay
@@ -54,7 +54,7 @@ if [ -z "$hdf5_mpi_complex_derived_datatype_works" ]; then
     fi
 fi
 
-if [ -z "$hdf5_mpi_special_collective_io_works" ]; then
+if [ -z "$hdf5_cv_mpi_special_collective_io_works" ]; then
     ccversion=`$CC -v 2>/dev/null`
     # mpich compiler will give "mpicc for 1.2.x ..."
     if echo "$ccversion" | grep '^mpicc for' > /dev/null ; then
@@ -62,16 +62,16 @@ if [ -z "$hdf5_mpi_special_collective_io_works" ]; then
         ccversion=`echo $ccversion | cut -f3 -d' '`
 	case "$ccversion" in
 	    1.2.[0-6]*)
-		hdf5_mpi_special_collective_io_works='no'
+		hdf5_cv_mpi_special_collective_io_works='no'
 		;;
 	    1.0.2)
 		# mpich2 is recycling the version number, some report
 		# 1.0.2, some report blank.
-		hdf5_mpi_special_collective_io_works='no'
+		hdf5_cv_mpi_special_collective_io_works='no'
 		;;
 	    "")
 		# got blank ccversion.  Assume it is bad a mpich2.
-		hdf5_mpi_special_collective_io_works='no'
+		hdf5_cv_mpi_special_collective_io_works='no'
 		;;
 	    *)
 		# assume okay
diff --git a/config/nec-superux14.1 b/config/nec-superux14.1
index 2ead4d0..dc1a15d 100644
--- a/config/nec-superux14.1
+++ b/config/nec-superux14.1
@@ -172,8 +172,8 @@ hdf5_cv_ldouble_to_uint_work=no
 hdf5_cv_ullong_to_fp_cast_works=yes
 hdf5_cv_ullong_to_ldouble_precision_works=no
 hdf5_cv_fp_to_integer_overflow_works=yes
-hdf5_fp_to_ullong_accurate=no
-hdf5_fp_to_ullong_right_maximum=no
+hdf5_cv_fp_to_ullong_accurate=no
+hdf5_cv_fp_to_ullong_right_maximum=no
 CONFIGURE_LIBS=/usr/lib/libi90sxe.a
 
 
diff --git a/config/powerpc-ibm-aix5.x b/config/powerpc-ibm-aix5.x
index 45cbd89..e7bb90f 100644
--- a/config/powerpc-ibm-aix5.x
+++ b/config/powerpc-ibm-aix5.x
@@ -153,7 +153,7 @@ fi
 # With poe version 3.2.0.19 or lower(using lpp -l all | grep ppe.poe to check the version number, 
 # IBM MPI-IO implementation has a bug, 
 #it cannot generate correct MPI derived datatype. Please uncomment the following line:
-#hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'}
+#hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'}
 
 # The default C++ compiler
 
diff --git a/config/x86_64-redstorm-linux-gnu b/config/x86_64-redstorm-linux-gnu
index 102e836..0cd2d73 100644
--- a/config/x86_64-redstorm-linux-gnu
+++ b/config/x86_64-redstorm-linux-gnu
@@ -163,4 +163,4 @@ hdf5_cv_ullong_to_ldouble_precision_works=${hdf5_cv_ullong_to_ldouble_precision_
 hdf5_cv_vsnprintf_works=${hdf5_cv_vsnprintf_works='yes'}
 hdf5_cv_fp_to_integer_overflow_works=${hdf5_cv_fp_to_integer_overflow_works='yes'}
 # mpich2 used has derived datatype errors.
-hdf5_mpi_complex_derived_datatype_works=${hdf5_mpi_complex_derived_datatype_works='no'}
+hdf5_cv_mpi_complex_derived_datatype_works=${hdf5_cv_mpi_complex_derived_datatype_works='no'}