[svn-r34] ./config/commence.in NEW

./config/conclude.in	NEW
	Templates for the beginning and end of each Makefile.

./config/depend.in	NEW
	Template for the part of the Makefile that generates source
	dependencies.

./config/freebsd2.2.1	NEW
./config/linux		NEW
	Personal preference files.  These are not part of a
	distribution but are for fine tuning configure for particular
	systems and are used by the HDF5 maintainers.

5 files changed, 165 insertions, 0 deletions

diff --git a/config/commence.in b/config/commence.in
new file mode 100644
index 0000000..503fa0d
--- /dev/null
+++ b/config/commence.in
@@ -0,0 +1,35 @@
+#------------------------------------------------------------- -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/commence' file which was generated with config.status
+# from `./config/commence.in'.
+#------------------------------------------------------------------------------
+
+# Things that Make needs
+.SUFFIXES:
+.SUFFIXES: .c .o
+@SET_MAKE@
+
+# Programs
+SHELL=/bin/sh
+CC=@CC@
+CFLAGS=@CFLAGS@
+CPPFLAGS=@CPPFLAGS@
+LIBS=@LIBS@
+AR=ar
+RANLIB=@RANLIB@
+RM=rm -f
+INSTALL=@INSTALL@
+INSTALL_PROGRAM=@INSTALL_PROGRAM@
+INSTALL_DATA=@INSTALL_DATA@
+
+# Installation points
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+bindir=@bindir@
+libdir=@libdir@
+includedir=@includedir@
+
+#------------------------------------------------------------------------------
+# The following section of this makefile comes from the middle of `Makefile.in'
+# from this directory.  It was generated by running `config.status'.
+#------------------------------------------------------------------------------
diff --git a/config/conclude.in b/config/conclude.in
new file mode 100644
index 0000000..4ff8b0b
--- /dev/null
+++ b/config/conclude.in
@@ -0,0 +1,80 @@
+#------------------------------------------------------------- -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/conclude' file which was generated with config.status
+# from `./config/conclude.in'.
+#------------------------------------------------------------------------------
+
+# The default is to build the library and programs.
+all: $(LIB) $(PROGS)
+lib: $(LIB)
+
+# This is the target for the library described in the main body of the
+# makefile.
+#
+$(LIB) __no_library__: $(LIB_OBJ)
+	$(AR) -rc $@ $(LIB_OBJ)
+	$(RANLIB) $@
+
+# Build a tags file in this directory.
+TAGS: $(LIB_SRC)
+	$(RM) $@
+	-etags $(LIB_SRC)
+
+# Install the library, the public header files, and programs.
+install: $(LIB) $(PUB_HDR) $(PROGS)
+	@if test -n "$(LIB)"; then					      \
+	   (set -x; $(INSTALL_DATA) $(LIB) $(libdir) || exit 1);	      \
+	fi
+	@if test -n "$(PUB_HDR)"; then					      \
+	   (set -x; $(INSTALL_DATA) $(PUB_HDR) $(includedir) || exit 1);      \
+        fi
+	@if test -n "$(PROGS)"; then					      \
+	   (set -x; $(INSTALL_PROGRAM) $(PROGS) $(bindir) || exit 1);	      \
+	fi
+
+# Removes those things that `make install' (would have) installed.
+uninstall:
+	$(RM) $(libdir)/$(LIB)
+	$(RM) $(includedir)/$(PUB_HDR)
+	$(RM) $(bindir)/$(PROGS)
+
+# Removes temporary files without removing the final target files.  That is,
+# remove things like object files but not libraries or executables.
+#
+mostlyclean:
+	$(RM) $(LIB_OBJ) $(PROG_OBJ)
+
+# Like `mostlyclean' except it also removes the final targets: things like
+# libraries and executables.  This target doesn't remove any file that
+# is part of the HDF5 distribution.
+#
+clean: mostlyclean
+	$(RM) $(LIB) $(PROGS)
+
+# Like `clean' except it also removes files that were created by running
+# configure.  If you've unpacked the source and built HDF5 without creating
+# any other files, then `make distclean' will leave only the files that were
+# in the distribution.
+#
+distclean: clean
+	$(RM) .depend TAGS
+	@if test -f Makefile.in; then					      \
+	   (set -x; $(RM) Makefile);					      \
+	fi
+
+# Like `distclean' except it deletes all files that can be regenerated from
+# the makefile, including those generated from autoheader and autoconf.
+#
+maintainer-clean: distclean
+
+
+# Implicit rules
+.c.a:
+	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
+	$(AR) -rc $@ $*.o
+	$(RM) $*.o
+
+.c.o:
+	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
+
+@DEPEND@
diff --git a/config/depend.in b/config/depend.in
new file mode 100644
index 0000000..d8cec80
--- /dev/null
+++ b/config/depend.in
@@ -0,0 +1,35 @@
+#------------------------------------------------------------- -*- makefile -*-
+# The following section of this makefile comes from the
+# `./config/targets' file which was generated with config.status
+# from `./config/targets.in'.
+#------------------------------------------------------------------------------
+
+# We keep a list of dependencies in `.depend' for each of the source
+# files on which it depends.  When one of the source files is modified
+# we remove its record from .depend and regenerate its dependencies,
+# tacking them onto the end of .depend.  By including the .depend file
+# into the makefile, we're telling make that the makefile depends on
+# the dependency list in the .depend file.
+#
+# This is as fast as the `.d' method described in the GNU make manual
+# for automatic dependencies, but has the added advantage that all
+# dependencies are stored in one place.  The advantage over the
+# `makedepend' program is that only those files that are out of date
+# have dependency information rebuilt, and the Makefile is not
+# modified.
+#
+.PRECIOUS: .depend
+dep depend: .depend
+
+.depend: $(LIB_SRC) $(PROG_SRC)
+	@touch .depend
+	@for dep in $? dummy; do					      \
+	   if [ $$dep != "dummy" ]; then				      \
+	      echo Building dependencies for $$dep;			      \
+	      obj=`echo $$dep | sed 's/\.c/.o/'`;			      \
+	      sed "/$$obj/,/[^\\]$$/d" <$@ >$@- && mv $@- $@;		      \
+	      $(CC) -M -MG $(CPPFLAGS) $$dep >>$@;			      \
+	   fi;								      \
+	done
+
+-include .depend
diff --git a/config/freebsd2.2.1 b/config/freebsd2.2.1
new file mode 100644
index 0000000..681f7a9
--- /dev/null
+++ b/config/freebsd2.2.1
@@ -0,0 +1,7 @@
+# Site configuration -- do not distribute this file.
+
+if test "x$CFLAGS" = "x"; then
+   CFLAGS="-g -Wall -Wshadow -Wpointer-arith -Wcast-qual -Wwrite-strings  \
+       -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations \
+       -Wnested-externs"
+fi
diff --git a/config/linux b/config/linux
new file mode 100644
index 0000000..4a7778e
--- /dev/null
+++ b/config/linux
@@ -0,0 +1,8 @@
+# Site configuration -- do not distribute this file.
+
+if test "x$CFLAGS" = "x"; then
+   CFLAGS="-g -Wall -Wshadow -Wpointer-arith -Wcast-qual -Wwrite-strings  \
+       -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations \
+       -Wnested-externs"
+fi
+