[svn-r26378] Bring revisions #26220 - #26324 from trunk to revise_chunks. h5committested.

3 files changed, 2 insertions, 352 deletions

diff --git a/config/cmake/CMakePackageConfigHelpers.cmake b/config/cmake/CMakePackageConfigHelpers.cmake
deleted file mode 100644
index c6dc141..0000000
--- a/config/cmake/CMakePackageConfigHelpers.cmake
+++ /dev/null
@@ -1,321 +0,0 @@
-#.rst:
-# CMakePackageConfigHelpers
-# -------------------------
-#
-# Helpers functions for creating config files that can be included by other
-# projects to find and use a package.
-#
-# Adds the :command:`configure_package_config_file()` and
-# :command:`write_basic_package_version_file()` commands.
-#
-# Generating a Package Configuration File
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# .. command:: configure_package_config_file
-#
-#  Create a config file for a project::
-#
-#     configure_package_config_file(<input> <output> INSTALL_DESTINATION <path>
-#                                                    [PATH_VARS <var1> <var2> ... <varN>]
-#                                                    [NO_SET_AND_CHECK_MACRO]
-#                                                    [NO_CHECK_REQUIRED_COMPONENTS_MACRO]
-#                                                    [INSTALL_PREFIX <path>])
-#
-#
-# ``configure_package_config_file()`` should be used instead of the plain
-# :command:`configure_file()` command when creating the ``<Name>Config.cmake``
-# or ``<Name>-config.cmake`` file for installing a project or library.  It helps
-# making the resulting package relocatable by avoiding hardcoded paths in the
-# installed ``Config.cmake`` file.
-#
-# In a ``FooConfig.cmake`` file there may be code like this to make the install
-# destinations know to the using project:
-#
-# .. code-block:: cmake
-#
-#    set(FOO_INCLUDE_DIR   "@CMAKE_INSTALL_FULL_INCLUDEDIR@" )
-#    set(FOO_DATA_DIR   "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" )
-#    set(FOO_ICONS_DIR   "@CMAKE_INSTALL_PREFIX@/share/icons" )
-#    ...logic to determine installedPrefix from the own location...
-#    set(FOO_CONFIG_DIR  "${installedPrefix}/@CONFIG_INSTALL_DIR@" )
-#
-# All 4 options shown above are not sufficient, since the first 3 hardcode the
-# absolute directory locations, and the 4th case works only if the logic to
-# determine the ``installedPrefix`` is correct, and if ``CONFIG_INSTALL_DIR``
-# contains a relative path, which in general cannot be guaranteed.  This has the
-# effect that the resulting ``FooConfig.cmake`` file would work poorly under
-# Windows and OSX, where users are used to choose the install location of a
-# binary package at install time, independent from how
-# :variable:`CMAKE_INSTALL_PREFIX` was set at build/cmake time.
-#
-# Using ``configure_package_config_file`` helps.  If used correctly, it makes
-# the resulting ``FooConfig.cmake`` file relocatable.  Usage:
-#
-#    1. write a ``FooConfig.cmake.in`` file as you are used to
-#    2. insert a line containing only the string ``@PACKAGE_INIT@``
-#    3. instead of ``set(FOO_DIR "@SOME_INSTALL_DIR@")``, use
-#       ``set(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@")`` (this must be after the
-#       ``@PACKAGE_INIT@`` line)
-#    4. instead of using the normal :command:`configure_file()`, use
-#       ``configure_package_config_file()``
-#
-#
-#
-# The ``<input>`` and ``<output>`` arguments are the input and output file, the
-# same way as in :command:`configure_file()`.
-#
-# The ``<path>`` given to ``INSTALL_DESTINATION`` must be the destination where
-# the ``FooConfig.cmake`` file will be installed to.  This path can either be
-# absolute, or relative to the ``INSTALL_PREFIX`` path.
-#
-# The variables ``<var1>`` to ``<varN>`` given as ``PATH_VARS`` are the
-# variables which contain install destinations.  For each of them the macro will
-# create a helper variable ``PACKAGE_<var...>``.  These helper variables must be
-# used in the ``FooConfig.cmake.in`` file for setting the installed location.
-# They are calculated by ``configure_package_config_file`` so that they are
-# always relative to the installed location of the package.  This works both for
-# relative and also for absolute locations.  For absolute locations it works
-# only if the absolute location is a subdirectory of ``INSTALL_PREFIX``.
-#
-# If the ``INSTALL_PREFIX`` argument is passed, this is used as base path to
-# calculate all the relative paths.  The ``<path>`` argument must be an absolute
-# path.  If this argument is not passed, the :variable:`CMAKE_INSTALL_PREFIX`
-# variable will be used instead.  The default value is good when generating a
-# FooConfig.cmake file to use your package from the install tree.  When
-# generating a FooConfig.cmake file to use your package from the build tree this
-# option should be used.
-#
-# By default ``configure_package_config_file`` also generates two helper macros,
-# ``set_and_check()`` and ``check_required_components()`` into the
-# ``FooConfig.cmake`` file.
-#
-# ``set_and_check()`` should be used instead of the normal ``set()`` command for
-# setting directories and file locations.  Additionally to setting the variable
-# it also checks that the referenced file or directory actually exists and fails
-# with a ``FATAL_ERROR`` otherwise.  This makes sure that the created
-# ``FooConfig.cmake`` file does not contain wrong references.
-# When using the ``NO_SET_AND_CHECK_MACRO``, this macro is not generated
-# into the ``FooConfig.cmake`` file.
-#
-# ``check_required_components(<package_name>)`` should be called at the end of
-# the ``FooConfig.cmake`` file if the package supports components.  This macro
-# checks whether all requested, non-optional components have been found, and if
-# this is not the case, sets the ``Foo_FOUND`` variable to ``FALSE``, so that
-# the package is considered to be not found.  It does that by testing the
-# ``Foo_<Component>_FOUND`` variables for all requested required components.
-# When using the ``NO_CHECK_REQUIRED_COMPONENTS_MACRO`` option, this macro is
-# not generated into the ``FooConfig.cmake`` file.
-#
-# For an example see below the documentation for
-# :command:`write_basic_package_version_file()`.
-#
-# Generating a Package Version File
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# .. command:: write_basic_package_version_file
-#
-#  Create a version file for a project::
-#
-#     write_basic_package_version_file(<filename>
-#                                      [VERSION <major.minor.patch>]
-#                                      COMPATIBILITY <AnyNewerVersion|SameMajorVersion|ExactVersion> )
-#
-#
-# Writes a file for use as ``<package>ConfigVersion.cmake`` file to
-# ``<filename>``.  See the documentation of :command:`find_package()` for
-# details on this.
-#
-# ``<filename>`` is the output filename, it should be in the build tree.
-# ``<major.minor.patch>`` is the version number of the project to be installed.
-#
-# If no ``VERSION`` is given, the :variable:`PROJECT_VERSION` variable is used.
-# If this hasn't been set, it errors out.
-#
-# The ``COMPATIBILITY`` mode ``AnyNewerVersion`` means that the installed
-# package version will be considered compatible if it is newer or exactly the
-# same as the requested version.  This mode should be used for packages which
-# are fully backward compatible, also across major versions.
-# If ``SameMajorVersion`` is used instead, then the behaviour differs from
-# ``AnyNewerVersion`` in that the major version number must be the same as
-# requested, e.g.  version 2.0 will not be considered compatible if 1.0 is
-# requested.  This mode should be used for packages which guarantee backward
-# compatibility within the same major version.
-# If ``ExactVersion`` is used, then the package is only considered compatible if
-# the requested version matches exactly its own version number (not considering
-# the tweak version).  For example, version 1.2.3 of a package is only
-# considered compatible to requested version 1.2.3.  This mode is for packages
-# without compatibility guarantees.
-# If your project has more elaborated version matching rules, you will need to
-# write your own custom ``ConfigVersion.cmake`` file instead of using this
-# macro.
-#
-# Internally, this macro executes :command:`configure_file()` to create the
-# resulting version file.  Depending on the ``COMPATIBLITY``, either the file
-# ``BasicConfigVersion-SameMajorVersion.cmake.in`` or
-# ``BasicConfigVersion-AnyNewerVersion.cmake.in`` is used.  Please note that
-# these two files are internal to CMake and you should not call
-# :command:`configure_file()` on them yourself, but they can be used as starting
-# point to create more sophisticted custom ``ConfigVersion.cmake`` files.
-#
-# Example Generating Package Files
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# Example using both :command:`configure_package_config_file` and
-# ``write_basic_package_version_file()``:
-#
-# ``CMakeLists.txt``:
-#
-# .. code-block:: cmake
-#
-#    set(INCLUDE_INSTALL_DIR include/ ... CACHE )
-#    set(LIB_INSTALL_DIR lib/ ... CACHE )
-#    set(SYSCONFIG_INSTALL_DIR etc/foo/ ... CACHE )
-#    ...
-#    include(CMakePackageConfigHelpers)
-#    configure_package_config_file(FooConfig.cmake.in ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
-#                                  INSTALL_DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake
-#                                  PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR)
-#    write_basic_package_version_file(${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
-#                                     VERSION 1.2.3
-#                                     COMPATIBILITY SameMajorVersion )
-#    install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
-#            DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake )
-#
-# ``FooConfig.cmake.in``:
-#
-# .. code-block:: cmake
-#
-#    set(FOO_VERSION x.y.z)
-#    ...
-#    @PACKAGE_INIT@
-#    ...
-#    set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
-#    set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@")
-#
-#    check_required_components(Foo)
-
-
-#=============================================================================
-# Copyright 2012 Alexander Neundorf <neundorf@kde.org>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(CMakeParseArguments)
-
-include(WriteBasicConfigVersionFile)
-
-macro(WRITE_BASIC_PACKAGE_VERSION_FILE)
-  write_basic_config_version_file(${ARGN})
-endmacro()
-
-function(CONFIGURE_PACKAGE_CONFIG_FILE _inputFile _outputFile)
-  set(options NO_SET_AND_CHECK_MACRO NO_CHECK_REQUIRED_COMPONENTS_MACRO)
-  set(oneValueArgs INSTALL_DESTINATION INSTALL_PREFIX)
-  set(multiValueArgs PATH_VARS )
-
-  cmake_parse_arguments(CCF "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${ARGN})
-
-  if(CCF_UNPARSED_ARGUMENTS)
-    message(FATAL_ERROR "Unknown keywords given to CONFIGURE_PACKAGE_CONFIG_FILE(): \"${CCF_UNPARSED_ARGUMENTS}\"")
-  endif()
-
-  if(NOT CCF_INSTALL_DESTINATION)
-    message(FATAL_ERROR "No INSTALL_DESTINATION given to CONFIGURE_PACKAGE_CONFIG_FILE()")
-  endif()
-
-  if(DEFINED CCF_INSTALL_PREFIX)
-    if(IS_ABSOLUTE "${CCF_INSTALL_PREFIX}")
-      set(installPrefix "${CCF_INSTALL_PREFIX}")
-    else()
-      message(FATAL_ERROR "INSTALL_PREFIX must be an absolute path")
-    endif()
-  else()
-    set(installPrefix "${CMAKE_INSTALL_PREFIX}")
-  endif()
-
-  if(IS_ABSOLUTE "${CCF_INSTALL_DESTINATION}")
-    set(absInstallDir "${CCF_INSTALL_DESTINATION}")
-  else()
-    set(absInstallDir "${installPrefix}/${CCF_INSTALL_DESTINATION}")
-  endif()
-
-  file(RELATIVE_PATH PACKAGE_RELATIVE_PATH "${absInstallDir}" "${installPrefix}" )
-
-  foreach(var ${CCF_PATH_VARS})
-    if(NOT DEFINED ${var})
-      message(FATAL_ERROR "Variable ${var} does not exist")
-    else()
-      if(IS_ABSOLUTE "${${var}}")
-        string(REPLACE "${installPrefix}" "\${PACKAGE_PREFIX_DIR}"
-                        PACKAGE_${var} "${${var}}")
-      else()
-        set(PACKAGE_${var} "\${PACKAGE_PREFIX_DIR}/${${var}}")
-      endif()
-    endif()
-  endforeach()
-
-  get_filename_component(inputFileName "${_inputFile}" NAME)
-
-  set(PACKAGE_INIT "
-####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() #######
-####### Any changes to this file will be overwritten by the next CMake run ####
-####### The input file was ${inputFileName}                            ########
-
-get_filename_component(PACKAGE_PREFIX_DIR \"\${CMAKE_CURRENT_LIST_DIR}/${PACKAGE_RELATIVE_PATH}\" ABSOLUTE)
-")
-
-  if("${absInstallDir}" MATCHES "^(/usr)?/lib(64)?/.+")
-    # Handle "/usr move" symlinks created by some Linux distros.
-    set(PACKAGE_INIT "${PACKAGE_INIT}
-# Use original install prefix when loaded through a \"/usr move\"
-# cross-prefix symbolic link such as /lib -> /usr/lib.
-get_filename_component(_realCurr \"\${CMAKE_CURRENT_LIST_DIR}\" REALPATH)
-get_filename_component(_realOrig \"${absInstallDir}\" REALPATH)
-if(_realCurr STREQUAL _realOrig)
-  set(PACKAGE_PREFIX_DIR \"${installPrefix}\")
-endif()
-unset(_realOrig)
-unset(_realCurr)
-")
-  endif()
-
-  if(NOT CCF_NO_SET_AND_CHECK_MACRO)
-    set(PACKAGE_INIT "${PACKAGE_INIT}
-macro(set_and_check _var _file)
-  set(\${_var} \"\${_file}\")
-  if(NOT EXISTS \"\${_file}\")
-    message(FATAL_ERROR \"File or directory \${_file} referenced by variable \${_var} does not exist !\")
-  endif()
-endmacro()
-")
-  endif()
-
-
-  if(NOT CCF_NO_CHECK_REQUIRED_COMPONENTS_MACRO)
-    set(PACKAGE_INIT "${PACKAGE_INIT}
-macro(check_required_components _NAME)
-  foreach(comp \${\${_NAME}_FIND_COMPONENTS})
-    if(NOT \${_NAME}_\${comp}_FOUND)
-      if(\${_NAME}_FIND_REQUIRED_\${comp})
-        set(\${_NAME}_FOUND FALSE)
-      endif()
-    endif()
-  endforeach()
-endmacro()
-")
-  endif()
-
-  set(PACKAGE_INIT "${PACKAGE_INIT}
-####################################################################################")
-
-  configure_file("${_inputFile}" "${_outputFile}" @ONLY)
-
-endfunction()
diff --git a/config/cmake/H5pubconf.h.in b/config/cmake/H5pubconf.h.in
index 8235c54..a557364 100644
--- a/config/cmake/H5pubconf.h.in
+++ b/config/cmake/H5pubconf.h.in
@@ -57,9 +57,6 @@
 /* Define the default plugins path to compile */
 #cmakedefine H5_DEFAULT_PLUGINDIR "@H5_DEFAULT_PLUGINDIR@"
 
-/* Define the default virtual file driver to compile */
-#cmakedefine H5_DEFAULT_VFD @H5_DEFAULT_VFD@
-
 /* Define if `dev_t' is a scalar */
 #cmakedefine H5_DEV_T_IS_SCALAR @H5_DEV_T_IS_SCALAR@
 
@@ -89,9 +86,6 @@
    long long values. */
 #cmakedefine H5_FP_TO_ULLONG_RIGHT_MAXIMUM @H5_FP_TO_ULLONG_RIGHT_MAXIMUM@
 
-/* Define if gettimeofday() populates the tz pointer passed in */
-#cmakedefine H5_GETTIMEOFDAY_GIVES_TZ @H5_GETTIMEOFDAY_GIVES_TZ@
-
 /* Define to 1 if you have the `alarm' function. */
 #cmakedefine H5_HAVE_ALARM @H5_HAVE_ALARM@
 
@@ -101,9 +95,6 @@
 /* Define if the __attribute__(()) extension is present */
 #cmakedefine H5_HAVE_ATTRIBUTE @H5_HAVE_ATTRIBUTE@
 
-/* Define to 1 if you have the `BSDgettimeofday' function. */
-#cmakedefine H5_HAVE_BSDGETTIMEOFDAY @H5_HAVE_BSDGETTIMEOFDAY@
-
 /* Define if the compiler understands C99 designated initialization of structs
    and unions */
 #cmakedefine H5_HAVE_C99_DESIGNATED_INITIALIZER @H5_HAVE_C99_DESIGNATED_INITIALIZER@
@@ -377,12 +368,6 @@
 /* Define if `struct text_info' is defined */
 #cmakedefine H5_HAVE_STRUCT_TEXT_INFO @H5_HAVE_STRUCT_TEXT_INFO@
 
-/* Define if `struct timezone' is defined */
-#cmakedefine H5_HAVE_STRUCT_TIMEZONE @H5_HAVE_STRUCT_TIMEZONE@
-
-/* Define to 1 if `tm_zone' is a member of `struct tm'. */
-#cmakedefine H5_HAVE_STRUCT_TM_TM_ZONE @H5_HAVE_STRUCT_TM_TM_ZONE@
-
 /* Define if `struct videoconfig' is defined */
 #cmakedefine H5_HAVE_STRUCT_VIDEOCONFIG @H5_HAVE_STRUCT_VIDEOCONFIG@
 
@@ -446,14 +431,6 @@
 /* Define if `tm_gmtoff' is a member of `struct tm' */
 #cmakedefine H5_HAVE_TM_GMTOFF @H5_HAVE_TM_GMTOFF@
 
-/* Define to 1 if your `struct tm' has `tm_zone'. Deprecated, use
-   `HAVE_STRUCT_TM_TM_ZONE' instead. */
-#cmakedefine H5_HAVE_TM_ZONE @H5_HAVE_TM_ZONE@
-
-/* Define to 1 if you don't have `tm_zone' but do have the external array
-   `tzname'. */
-#cmakedefine H5_HAVE_TZNAME @H5_HAVE_TZNAME@
-
 /* Define to 1 if you have the <unistd.h> header file. */
 #cmakedefine H5_HAVE_UNISTD_H @H5_HAVE_UNISTD_H@
 
@@ -484,9 +461,6 @@
 /* Define to 1 if you have the `_scrsize' function. */
 #cmakedefine H5_HAVE__SCRSIZE @H5_HAVE__SCRSIZE@
 
-/* Define if `__tm_gmtoff' is a member of `struct tm' */
-#cmakedefine H5_HAVE___TM_GMTOFF @H5_HAVE___TM_GMTOFF@
-
 /* Define if your system can't handle converting floating-point values to long
    long. */
 #cmakedefine H5_HW_FP_TO_LLONG_NOT_WORKS @H5_HW_FP_TO_LLONG_NOT_WORKS@
@@ -540,9 +514,6 @@
 /* Define if deprecated public API symbols are disabled */
 #cmakedefine H5_NO_DEPRECATED_SYMBOLS @H5_NO_DEPRECATED_SYMBOLS@
 
-/* Define if shared writing must be disabled (CodeWarrior only) */
-#cmakedefine H5_NO_SHARED_WRITING @H5_NO_SHARED_WRITING@
-
 /* Name of package */
 #define H5_PACKAGE "@HDF5_PACKAGE@"
 
diff --git a/config/commence.am b/config/commence.am
index 4bc005e..554c9fb 100644
--- a/config/commence.am
+++ b/config/commence.am
@@ -89,8 +89,8 @@ F9XMODFLAG=@F9XMODFLAG@
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES=*.chkexe *.chklog *.clog
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES=*.chkexe *.chklog *.clog *.clog2
 
 # List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
 # This tells the Makefiles that these targets are not files to be built but