[svn-r26505] Merge r26435 from autotools_rework branch.

Remove DEFAULT_LIBS from configure.ac and irix6.x config file which
was using it.

Remove references to IRIX/irix* platform.

2 files changed, 2 insertions, 183 deletions

diff --git a/config/cmake/ConfigureChecks.cmake b/config/cmake/ConfigureChecks.cmake
index 4dff2c2..217f81f 100644
--- a/config/cmake/ConfigureChecks.cmake
+++ b/config/cmake/ConfigureChecks.cmake
@@ -261,9 +261,7 @@ ENDMACRO (H5MiscConversionTest)
 # -----------------------------------------------------------------------
 # Set flag to indicate that the machine can handle conversion from
 # integers to long double.  (This flag should be set "yes" for all
-# machines except all SGIs, where some conversions are
-# incorrect and its cache value is set "no" in its config/irix6.x and
-# irix5.x)
+# machines except all SGIs, where some conversions are incorrect)
 #
 H5MiscConversionTest (H5_SIZEOF_LONG_DOUBLE H5_INTEGER_TO_LDOUBLE_ACCURATE "checking IF accurately converting from integers to long double")
 # ----------------------------------------------------------------------
@@ -278,8 +276,7 @@ H5ConversionTests (H5_ULONG_TO_FLOAT_ACCURATE "Checking IF accurately converting
 # ----------------------------------------------------------------------
 # Set the flag to indicate that the machine can accurately convert
 # 'unsigned (long) long' values to 'float' and 'double' values.
-# (This flag should be set for all machines, except for the SGIs, where
-# the cache value is set in the config/irix6.x config file) and Solaris
+# (This flag should be set for all machines, except for the SGIs) and Solaris
 # 64-bit machines, where the short program below tests if round-up is
 # correctly handled.
 #
diff --git a/config/irix6.x b/config/irix6.x
deleted file mode 100644
index 8907a66..0000000
--- a/config/irix6.x
+++ /dev/null
@@ -1,178 +0,0 @@
-#							-*- shell-script -*-
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-
-
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# Disable dependency tracking on IRIX unless the user specifically asks for
-# it.
-# IRIX's pmake confuses automake (as of version 1.9) if dependency tracking
-# is enabled and it is not an in-place build.  Simply disabling dependency
-# tracking on IRIX is simpler to implement than detecting pmake, detecting
-# when a build is not in-place, and then disabling dependency tracking.
-if test -z "${enable_dependency_tracking}"; then
-  enable_dependency_tracking="no"
-fi
-
-# Use SGI supplied C compiler by default.  There is no ranlib
-if test "X-" = "X-$CC"; then
-    CC='cc'
-    CC_BASENAME=cc
-    # use c99 compiler if available.
-    if `c99 -version >/dev/null 2>&1` ; then
-        CC='c99'
-    fi
-fi
-RANLIB=:
-
-# Compiler flags
-case "X-$CC_BASENAME" in
-  X-gcc)
-    . $srcdir/config/gnu-flags
-    ;;
-
-  *)
-    if [ "$CC_BASENAME" = "cc" ] || ($CC -version 2>&1 | grep -s "MIPSpro Compilers") 2>&1 > /dev/null; then
-      # use these flags if this is the SGI cc compiler or some compiler
-      # command that eventually uses the SGI cc compiler.
-
-      # Check for old versions of the compiler that don't work right.
-      case "`$CC -version 2>&1 |head -1`" in
-        "Mongoose Compilers: Version 7.00")
-          echo "  +---------------------------------------------------+"
-          echo "  | You have an old version of cc (Mongoose Compilers |"
-          echo "  | version 7.00).  Please upgrade to MIPSpro version |"
-          echo "  | 7.2.1.2m (patches are available from the SGI web  |"
-          echo "  | site).  The 7.00 version may generate incorrect   |"
-          echo "  | code, especially when optimizations are enabled.  |"
-          echo "  +---------------------------------------------------+"
-          sleep 5
-          ;;
-      esac
-
-      # Always turn off these compiler warnings for the -64 compiler:
-      #    1174:  function declared but not used
-      #    1196:  __vfork() (this is an SGI config problem)
-      #    1209:  constant expressions
-      #    1429:  the `long long' type is not standard
-      #    1685:  turn off warnings about turning off invalid warnings
-      #    3201:  remark - parameter not referenced
-      #H5_CFLAGS="$H5_CFLAGS -woff 1174,1429,1209,1196,1685,3201"
-      H5_CFLAGS="$H5_CFLAGS -woff 1209,3201"
-
-      # Always turn off these compiler warnings for the old compiler:
-      #    799:   the `long long' type is not standard
-      #    803:   turn off warnings about turning off invalid warnings
-      #    835:   __vfork() (this is an SGI config problem)
-      #H5_CFLAGS="$H5_CFLAGS -woff 799,803,835"
-
-      # Always turn off these loader warnings:
-      # (notice the peculiar syntax)
-      #      47:  branch instructions that degrade performance on R4000
-      #      84:  a library is not used
-      #      85:  duplicate definition preemption (from -lnsl)
-      #     134:  duplicate weak definition preemption (from -lnsl)
-      H5_CFLAGS="$H5_CFLAGS -Wl,-woff,47,-woff,84,-woff,85,-woff,134"
-    fi
-
-    # Extra debugging flags
-    DEBUG_CFLAGS="-g -fullwarn"
-    DEBUG_CPPFLAGS=
-
-    # Extra production flags
-    PROD_CFLAGS="-O -OPT:Olimit=0 -s"
-    PROD_CPPFLAGS=
-
-    # Extra profiling flags
-    PROFILE_CFLAGS=
-    PROFILE_CPPFLAGS=
-    ;;
-esac
-
-# The default Fortran 90 compiler
-
-if test "X-" = "X-$FC"; then
-  FC="f90"
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-  F9XSUFFIXFLAG=""
-  FSEARCH_DIRS=""
-  H5_FCFLAGS="$H5_FCFLAGS -mips4 -O -s"
-  DEBUG_FCFLAGS="-mips4 -O -s"
-  PROD_FCFLAGS="-mips4 -O -s"
-  PROFILE_FCFLAGS="-mips4 -O -s"
-  f9x_flags_set=yes
-fi
-
-# The default C++ compiler
-
-# The default compiler is `MIPSpro CC'
-if test -z "$CXX"; then
-  CXX=CC
-  CXX_BASENAME=CC
-fi
-
-# Try native compiler flags
-if test -z "$cxx_flags_set"; then
-  # -LANG:std required for std use; -ptused causes templates used to be
-  # instantiated
-  AM_CPPFLAGS="$AM_CPPFLAGS -LANG:std"
-  H5_CPPFLAGS="$H5_CPPFLAGS -ptused"
-
-  # libCio is a default library, since libtool before 1.5 doesn't fully 
-  # support C++ yet, default libraries must be explicitly specified.
-  # A new macro is used for this temporary and specific task so it 
-  # won't polute the existing configuration 
-  DEFAULT_LIBS="-lCio"
-
-  DEBUG_CXXFLAGS=-g
-  DEBUG_CPPFLAGS=
-  PROD_CXXFLAGS="-O -s"
-  PROD_CPPFLAGS=
-  PROFILE_CXXFLAGS=-xpg
-  PROFILE_CPPFLAGS=
-  cxx_flags_set=yes
-fi
-
-# Hard set flag to indicate that the 'unsigned long long' to floating-point
-# value conversion are broken by the compilers (as of 4/27/04 - QAK)
-hdf5_cv_ulong_to_fp_bottom_bit_accurate=${hdf5_cv_ulong_to_fp_bottom_bit_accurate='no'}
-
-# Set flags to avoid conversion between 'long double' and integers because of 
-# SGI's compiler problems.  For both IRIX64 6.5 and IRIX 6.5, the compilers
-# have the following problems,
-#       long double -> signed char : incorrect rounding
-#       long double -> unsigned char : incorrect rounding
-#       long double -> short : incorrect rounding
-#       long double -> unsigned short : incorrect rounding
-#       long double -> long or long long: incorrect value
-#       long double -> unsigned long or long long : incorrect value
-#
-#       long or long long -> long double : correct value but incorrect bit pattern
-#       unsigned long or long long -> long double : correct value but incorrect bit pattern
-# (1/5/05 - SLU)
-hdf5_cv_ldouble_to_integer_accurate=${hdf5_cv_ldouble_to_integer_accurate='no'}
-hdf5_cv_integer_to_ldouble_accurate=${hdf5_cv_integer_to_ldouble_accurate='no'}
-
-# Set flag to generate alternate code for H5VM_log2_gen, to avoid
-# problems with the MIPSpro compiler 7.30 and IRIX64 6.5 (ie. other
-# combinations might work, but haven't been tested)
-# (9/15/06 - QAK)
-hdf5_cv_bad_log2_code_generated=${hdf5_cv_bad_log2_code_generated='yes'}