[svn-r1515] Changes since 19990715

----------------------

./Makefile.in		[1.3]
./examples/Makefile.in	[1.3]
./pablo/Makefile.in	[1.3]
./src/Makefile.in	[1.3]
./test/Makefile.in	[1.3]
./testpar/Makefile.in	[1.3]
./tools/Makefile.in	[1.3]
./config/commence.in	[1.3]
./config/conclude.in	[1.3]
./config/depend.in	[1.3]
	Added a `.PATH' target for Irix pmake which is identical to
	the VPATH used by most other `make' programs. Irix 6.5 (or
	6.4?) and later `make' ignores VPATH.

	Started all beginning-of-line comments with `##' instead of
	just `#' because Irix `pmake' barfs on things like the
	following because it sees the `# if' as a directive:

		# make will barf on the following line
		# if running Irix pmake


./config/commence.in	[1.3]
	Added empty definitions for optional `make' macros because
	Irix pmake complains if it sees a macro which has never been
	defined. The main body of the Makefiles can redefine these
	macros to whatever they need.

3 files changed, 122 insertions, 110 deletions

diff --git a/config/commence.in b/config/commence.in
index 33b0d32..99d9f73 100644
--- a/config/commence.in
+++ b/config/commence.in
@@ -1,15 +1,15 @@
-#------------------------------------------------------------- -*- makefile -*-
-# The following section of this makefile comes from the
-# `./config/commence' file which was generated with config.status
-# from `./config/commence.in'.
-#------------------------------------------------------------------------------
+##------------------------------------------------------------ -*- makefile -*-
+## The following section of this makefile comes from the
+## `./config/commence' file which was generated with config.status
+## from `./config/commence.in'.
+##-----------------------------------------------------------------------------
 
-# Things that Make needs
+## Things that Make needs
 .SUFFIXES:
 .SUFFIXES: .c .o .lo
 @SET_MAKE@
 
-# Programs
+## Programs
 SHELL=/bin/sh
 CC=@CC@
 CFLAGS=@CFLAGS@
@@ -28,7 +28,7 @@ RUNPARALLEL=@RUNPARALLEL@
 RUNTEST=$(RUNSERIAL)
 TRACE=:
 
-# Installation points
+## Installation points
 prefix=@prefix@
 exec_prefix=@exec_prefix@
 bindir=@bindir@
@@ -36,7 +36,7 @@ libdir=@libdir@
 includedir=@includedir@
 PUB_LIB=$(LIB)
 
-# Shared libraries
+## Shared libraries
 LT=$(top_builddir)/libtool
 LT_COMPILE=$(LT) --mode=compile $(CC)
 LT_LINK_LIB=$(LT) --mode=link $(CC) -rpath $(libdir)
@@ -46,49 +46,60 @@ LT_INSTALL_PROG=$(LT) --mode=install $(INSTALL_PROGRAM)
 LT_INSTALL_LIB=$(LT) --mode=install $(INSTALL_DATA)
 LT_UNINSTALL=$(LT) --mode=uninstall $(RM)
 
+## Optional variables. We must declare them here because Irix pmake
+## complains if it sees a reference to a variable which has never been
+## defined. The main makefile is free to redefine these to something else.
+LIB=
+LIB_SRC=
+LIB_OBJ=
+PUB_HDR=
+PROGS=
+TEST_PROGS=
+TEST_FLAGS=
+TEST_SCRIPTS=
 
-# The default is to build the library and/or programs.  We must build
-# them sequentially.
+## The default is to build the library and/or programs.  We must build
+## them sequentially.
 all:
 	$(MAKE) lib
 	$(MAKE) progs
 	$(MAKE) tests
 
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-#
-# Graphically, the dependencies are:
-#
-#		         configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-#
+## The following rules insure that the Makefile is up-to-date by rerunning
+## various autoconf components (although not all versions of make assume
+## that the makefile is implicitly a target).  We use time stamp files to
+## keep track of the most recent update of H5config.h.in and H5config.h
+## because autoheader and config.status don't update the modification time
+## if the contents don't change.
+##
+## Graphically, the dependencies are:
+##
+##		         configure.in
+##                           |  |
+##         +-----------------+  +------------+
+##         |                                 |
+##      stamp1                           configure
+##   (H5config.h.in)                         |
+##       |  |                                |
+##       |  +---------------+    +-----------+
+##       |                  |    |
+##       |               config.status
+##       |                     |
+##       |  +------------------+
+##       |  |
+##      stamp2
+##    (H5config.h)                   Makefile.in et al
+##         |                                 |
+##         +------------------+  +-----------+
+##                            |  |
+##                          Makefile
+##
+## A side effect of updating stamp1 is to generate H5config.h.in and a
+## side effect of updating stamp2 is to generate H5config.h.  When using
+## a version of make that doesn't treat the makefile as the initial target
+## the user may want to occassionally type `make Makefile' in any source
+## directory.
+##
 STAMP1=$(top_builddir)/config/stamp1
 STAMP2=$(top_builddir)/config/stamp2
 
@@ -115,7 +126,8 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
 Makefile: $(MAKEFILE_PARTS) $(STAMP2)
 	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
 
-#------------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of `Makefile.in'
-# from this directory.  It was generated by running `config.status'.
-#------------------------------------------------------------------------------
+##-----------------------------------------------------------------------------
+## The following section of this makefile comes from the middle of
+## `Makefile.in' from this directory.  It was generated by running
+## `config.status'.
+##-----------------------------------------------------------------------------
diff --git a/config/conclude.in b/config/conclude.in
index 8e47c9e..b3ec16b 100644
--- a/config/conclude.in
+++ b/config/conclude.in
@@ -1,24 +1,24 @@
-#------------------------------------------------------------- -*- makefile -*-
-# The following section of this makefile comes from the
-# `./config/conclude' file which was generated with config.status
-# from `./config/conclude.in'.
-#------------------------------------------------------------------------------
-
-# This is the target for the library described in the main body of the
-# makefile.
-#
+##------------------------------------------------------------ -*- makefile -*-
+## The following section of this makefile comes from the
+## `./config/conclude' file which was generated with config.status
+## from `./config/conclude.in'.
+##-----------------------------------------------------------------------------
+
+## This is the target for the library described in the main body of the
+## makefile.
+##
 lib: $(LIB)
 $(LIB) __no_library__: $(LIB_OBJ)
 	@$(LT_LINK_LIB) -o $@ $(CFLAGS) $(LIB_OBJ) $(LIBS)
 
 progs: $(LIB) $(PROGS)
 
-# Build a tags file in this directory.
+## Build a tags file in this directory.
 TAGS: $(LIB_SRC)
 	$(RM) $@
 	-etags $(LIB_SRC)
 
-# Runs each test in order, passing $(TEST_FLAGS) to the program.
+## Runs each test in order, passing $(TEST_FLAGS) to the program.
 tests: $(TEST_PROGS) $(LIB)
 check test _test: tests
 	@for test in $(TEST_PROGS) dummy; do                                  \
@@ -45,7 +45,7 @@ check test _test: tests
 	   fi;								      \
 	done;
 
-# Make installation directories directories if they don't exist.
+## Make installation directories directories if they don't exist.
 $(libdir):
 	mkdir $@ && chmod 755 $@
 
@@ -55,7 +55,7 @@ $(includedir):
 $(bindir):
 	mkdir $@ && chmod 755 $@
 
-# Install the library, the public header files, and programs.
+## Install the library, the public header files, and programs.
 install: $(PUB_LIB) $(PUB_HDR) $(PROGS) $(libdir) $(includedir) $(bindir)
 	@for f in X $(PUB_LIB); do					      \
 	   if test $$f != X; then					      \
@@ -81,7 +81,7 @@ install: $(PUB_LIB) $(PUB_HDR) $(PROGS) $(libdir) $(includedir) $(bindir)
 	   fi;							              \
 	done
 
-# Removes those things that `make install' (would have) installed.
+## Removes those things that `make install' (would have) installed.
 uninstall:
 	@if test "X$(LIB)" != X; then					      \
 	   for f in $(LIB); do						      \
@@ -97,27 +97,27 @@ uninstall:
 	   done;							      \
 	fi
 
-# Removes temporary files without removing the final target files.  That is,
-# remove things like object files but not libraries or executables.
-#
+## Removes temporary files without removing the final target files.  That is,
+## remove things like object files but not libraries or executables.
+##
 mostlyclean:
 	-$(RM) $(LIB_OBJ) $(LIB_OBJ:.lo=.o)
 	-$(RM) $(TEST_OBJ) $(TEST_OBJ:.lo=.o)
 	-$(RM) $(PROG_OBJ) $(PROG_OBJ:.lo=.o) $(MOSTLYCLEAN)
 
-# Like `mostlyclean' except it also removes the final targets: things like
-# libraries and executables.  This target doesn't remove any file that
-# is part of the HDF5 distribution.
-#
+## Like `mostlyclean' except it also removes the final targets: things like
+## libraries and executables.  This target doesn't remove any file that
+## is part of the HDF5 distribution.
+##
 clean: mostlyclean
 	-$(RM) $(LIB) $(TEST_PROGS) $(PROGS) $(CLEAN)
 	-$(RM) -r .libs
 
-# Like `clean' except it also removes files that were created by running
-# configure.  If you've unpacked the source and built HDF5 without creating
-# any other files, then `make distclean' will leave only the files that were
-# in the distribution.
-#
+## Like `clean' except it also removes files that were created by running
+## configure.  If you've unpacked the source and built HDF5 without creating
+## any other files, then `make distclean' will leave only the files that were
+## in the distribution.
+##
 distclean: clean
 	-$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN)
 	@if test -f $(srcdir)/Makefile.in; then				      \
@@ -125,28 +125,28 @@ distclean: clean
 	fi
 
 
-# Like `distclean' except it deletes all files that can be regenerated from
-# the makefile, including those generated from autoheader and autoconf.
-#
+## Like `distclean' except it deletes all files that can be regenerated from
+## the makefile, including those generated from autoheader and autoconf.
+##
 maintainer-clean: distclean
 	-$(RM) *~ core core.* *.core *.bak *.contrib gmon.out
 
-# Implicit rules
+## Implicit rules
 .c.o:
 	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
 
 .c.lo:
 	@$(LT_COMPILE) $(CFLAGS) $(CPPFLAGS) -c $<
 
-#------------------------------------------------------------------------------
-# The following section of this makefile contains dependencies between the
-# source files and the header files.  If GNU make and GCC are being used then
-# the dependencies are in the form of rules that cause the information to
-# be kept updated automatically.  Otherwise the dependencies are listed
-# explicitly and come from the `.distdep' files in the various directories.
-# These files are part of the distribution and are generated automatically on
-# GNU/GCC systems.
-#------------------------------------------------------------------------------
+##-----------------------------------------------------------------------------
+## The following section of this makefile contains dependencies between the
+## source files and the header files.  If GNU make and GCC are being used then
+## the dependencies are in the form of rules that cause the information to
+## be kept updated automatically.  Otherwise the dependencies are listed
+## explicitly and come from the `.distdep' files in the various directories.
+## These files are part of the distribution and are generated automatically on
+## GNU/GCC systems.
+##-----------------------------------------------------------------------------
 
 @DEPEND1@
 @DEPEND2@
diff --git a/config/depend.in b/config/depend.in
index a02ad20..6915524 100644
--- a/config/depend.in
+++ b/config/depend.in
@@ -1,25 +1,25 @@
-#                                                              -*- makefile -*-
+##                                                             -*- makefile -*-
 
-# We keep a list of dependencies in `.depend' for each of the source
-# files on which it depends.  When one of the source files is modified
-# we remove its record from .depend and regenerate its dependencies,
-# tacking them onto the end of .depend.  By including the .depend file
-# into the makefile, we're telling make that the makefile depends on
-# the dependency list in the .depend file.
-#
-# This is as fast as the `.d' method described in the GNU make manual
-# for automatic dependencies, but has the added advantage that all
-# dependencies are stored in one place.  The advantage over the
-# `makedepend' program is that only those files that are out of date
-# have dependency information rebuilt, and the Makefile is not
-# modified.
-#
-# This is also where tracing information is updated.  The $(TRACE)
-# program is run on each source file to make sure that the H5TRACE()
-# macros are up to date.  If they are then the file is not modified,
-# otherwise the file is changed and a backup is saved by appending a
-# tilde to the file name.
-#
+## We keep a list of dependencies in `.depend' for each of the source
+## files on which it depends.  When one of the source files is modified
+## we remove its record from .depend and regenerate its dependencies,
+## tacking them onto the end of .depend.  By including the .depend file
+## into the makefile, we're telling make that the makefile depends on
+## the dependency list in the .depend file.
+##
+## This is as fast as the `.d' method described in the GNU make manual
+## for automatic dependencies, but has the added advantage that all
+## dependencies are stored in one place.  The advantage over the
+## `makedepend' program is that only those files that are out of date
+## have dependency information rebuilt, and the Makefile is not
+## modified.
+##
+## This is also where tracing information is updated.  The $(TRACE)
+## program is run on each source file to make sure that the H5TRACE()
+## macros are up to date.  If they are then the file is not modified,
+## otherwise the file is changed and a backup is saved by appending a
+## tilde to the file name.
+##
 .PRECIOUS: .depend .distdep
 dep depend: .distdep