[svn-r11084]

Description:
    All HDF5 user documentation has been moved to a separate hdf5doc/
        repository, managed under Subversion.
    With this 'cvs commit', all files are stripped from hdf5/doc/.
    THIS CHANGE IS APPLIED ONLY TO THE HDF5 DEVELOPMENT BRANCH,
    post Release 1.6.x; it is not applied to the release branches.

3 files changed, 0 insertions, 687 deletions

diff --git a/doc/html/PSandPDF/Makefile.am b/doc/html/PSandPDF/Makefile.am
deleted file mode 100644
index 0d85ec4..0000000
--- a/doc/html/PSandPDF/Makefile.am
+++ /dev/null
@@ -1,16 +0,0 @@
-# HDF5 Library Doc Makefile(.in)
-#
-# Copyright (C) 1997, 2002
-#     National Center for Supercomputing Applications.
-#     All rights reserved.
-#
-##
-## Makefile.am
-## Run automake to generate a Makefile.in from this file.
-#
-
-include $(top_srcdir)/config/commence-doc.am
-
-localdocdir=$(docdirc)/hdf5/PSandPDF
-
-# This makefile does nothing; there are no files to install.
diff --git a/doc/html/PSandPDF/Makefile.in b/doc/html/PSandPDF/Makefile.in
deleted file mode 100644
index dcf57ca..0000000
--- a/doc/html/PSandPDF/Makefile.in
+++ /dev/null
@@ -1,453 +0,0 @@
-# Makefile.in generated by automake 1.9.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# HDF5 Library Doc Makefile(.in)
-#
-# Copyright (C) 1997, 2002
-#     National Center for Supercomputing Applications.
-#     All rights reserved.
-#
-#
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../../..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/config/commence-doc.am \
-	$(top_srcdir)/config/commence.am
-subdir = doc/html/PSandPDF
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/H5config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-# Set the paths for AFS installs of autotools for Linux machines
-# Ideally, these tools should never be needed during the build.
-ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
-ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AM_MAKEFLAGS = @AM_MAKEFLAGS@
-AR = @AR@
-AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
-AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
-AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
-AWK = @AWK@
-BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
-BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
-BUILD_FORTRAN_CONDITIONAL_FALSE = @BUILD_FORTRAN_CONDITIONAL_FALSE@
-BUILD_FORTRAN_CONDITIONAL_TRUE = @BUILD_FORTRAN_CONDITIONAL_TRUE@
-BUILD_HDF5_HL_CONDITIONAL_FALSE = @BUILD_HDF5_HL_CONDITIONAL_FALSE@
-BUILD_HDF5_HL_CONDITIONAL_TRUE = @BUILD_HDF5_HL_CONDITIONAL_TRUE@
-BUILD_PABLO_CONDITIONAL_FALSE = @BUILD_PABLO_CONDITIONAL_FALSE@
-BUILD_PABLO_CONDITIONAL_TRUE = @BUILD_PABLO_CONDITIONAL_TRUE@
-BUILD_PARALLEL_CONDITIONAL_FALSE = @BUILD_PARALLEL_CONDITIONAL_FALSE@
-BUILD_PARALLEL_CONDITIONAL_TRUE = @BUILD_PARALLEL_CONDITIONAL_TRUE@
-BUILD_PDB2HDF = @BUILD_PDB2HDF@
-BUILD_PDB2HDF_CONDITIONAL_FALSE = @BUILD_PDB2HDF_CONDITIONAL_FALSE@
-BUILD_PDB2HDF_CONDITIONAL_TRUE = @BUILD_PDB2HDF_CONDITIONAL_TRUE@
-BYTESEX = @BYTESEX@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_VERSION = @CC_VERSION@
-CFLAGS = @CFLAGS@
-CONFIG_DATE = @CONFIG_DATE@
-CONFIG_MODE = @CONFIG_MODE@
-CONFIG_USER = @CONFIG_USER@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_PKG = @DEBUG_PKG@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DYNAMIC_DIRS = @DYNAMIC_DIRS@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-
-# Make sure that these variables are exported to the Makefiles
-F9XMODEXT = @F9XMODEXT@
-F9XMODFLAG = @F9XMODFLAG@
-F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
-FC = @FC@
-FCFLAGS = @FCFLAGS@
-FCLIBS = @FCLIBS@
-FFLAGS = @FFLAGS@
-FILTERS = @FILTERS@
-FSEARCH_DIRS = @FSEARCH_DIRS@
-H5_VERSION = @H5_VERSION@
-HADDR_T = @HADDR_T@
-HDF5_INTERFACES = @HDF5_INTERFACES@
-HID_T = @HID_T@
-HL = @HL@
-HL_FOR = @HL_FOR@
-HSIZET = @HSIZET@
-HSIZE_T = @HSIZE_T@
-HSSIZE_T = @HSSIZE_T@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_STATIC_EXEC = @LT_STATIC_EXEC@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-MPE = @MPE@
-OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PARALLEL = @PARALLEL@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PTHREAD = @PTHREAD@
-RANLIB = @RANLIB@
-ROOT = @ROOT@
-RUNPARALLEL = @RUNPARALLEL@
-RUNSERIAL = @RUNSERIAL@
-R_INTEGER = @R_INTEGER@
-R_LARGE = @R_LARGE@
-SEARCH = @SEARCH@
-SETX = @SETX@
-SET_MAKE = @SET_MAKE@
-
-# Hardcode SHELL to be /bin/sh.  Most machines have this shell, and
-# on at least one machine configure fails to detect its existence (janus).
-# Also, when HDF5 is configured on one machine but run on another,
-# configure's automatic SHELL detection may not work on the build machine.
-SHELL = /bin/sh
-SIZE_T = @SIZE_T@
-STATIC_SHARED = @STATIC_SHARED@
-STRIP = @STRIP@
-TESTPARALLEL = @TESTPARALLEL@
-TRACE_API = @TRACE_API@
-USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
-USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
-USE_FILTER_NBIT = @USE_FILTER_NBIT@
-USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
-USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
-USE_FILTER_SZIP = @USE_FILTER_SZIP@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_FC = @ac_ct_FC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-
-# Install directories that automake doesn't know about
-includedir = $(exec_prefix)/include
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-# Shell commands used in Makefiles
-RM = rm -f
-CP = cp
-
-# Some machines need a command to run executables; this is that command
-# so that our tests will run.
-# We use RUNTESTS instead of RUNSERIAL directly because it may be that
-# some tests need to be run with a different command.  Older versions
-# of the makefiles used the command
-# $(LIBTOOL) --mode=execute
-# in some directories, for instance.
-RUNTESTS = $(RUNSERIAL)
-
-# Libraries to link to while building
-LIBHDF5 = $(top_builddir)/src/libhdf5.la
-LIBH5TEST = $(top_builddir)/test/libh5test.la
-LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
-LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
-LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
-LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
-LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
-LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
-LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
-docdir = $(exec_prefix)/doc
-
-# Scripts used to build examples
-H5CC = $(bindir)/h5cc
-H5CC_PP = $(bindir)/h5pcc
-H5FC = $(bindir)/h5fc
-H5FC_PP = $(bindir)/h5pfc
-
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-MOSTLYCLEANFILES = *.chkexe *.chksh
-localdocdir = $(docdirc)/hdf5/PSandPDF
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/html/PSandPDF/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  doc/html/PSandPDF/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	$(mkdir_p) $(distdir)/../../../config
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-exec install-exec-am \
-	install-info install-info-am install-man install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
-	uninstall-info-am
-
-
-# Ignore most rules
-lib progs check test _test check-p check-s:
-	@echo "Nothing to be done"
-
-tests dep depend:
-	@@SETX@; for d in X $(SUBDIRS); do                                  \
-	  if test $$d != X; then                                            \
-	    (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;               \
-	  fi;     
-	done
-
-# In docs directory, install-doc is the same as install
-install-doc install-all:
-	$(MAKE) $(AM_MAKEFLAGS) install
-uninstall-doc uninstall-all:
-	$(MAKE) $(AM_MAKEFLAGS) uninstall
-
-# This makefile does nothing; there are no files to install.
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/doc/html/PSandPDF/process.txt b/doc/html/PSandPDF/process.txt
deleted file mode 100644
index 92fe2e6..0000000
--- a/doc/html/PSandPDF/process.txt
+++ /dev/null
@@ -1,218 +0,0 @@
-
-==============================================================================
-Process for Creating PDF Versions of the HDF5 RM and UG from HTML Source Files
-==============================================================================
-
-                                                    Last modified: 24 Sep 2004
-
-PDF versions of the HDF5 Reference Manual (RM) and the new HDF5 User's Guide 
-(UG) are created from the HTML source at each release of the HDF5 Library.  
-The process is managed through two application environments, Macromedia 
-DreamWeaver (an HTML editing environment) and HTML doc (a conversion tool).  
-This document describes the process in detail for the RM; the process for the 
-UG is very similar and will be described in a subsequent update.
-
-
-The HDF5 Reference Manual
--------------------------
-1.  Using Macromedia Dreamweaver, define a site that contains all the 
-    documents within doc/html, including html, image, DreamWeaver library and 
-    .book files.
-
-2.  In the ed_libs directory:
-
-      a) Assuming you have your libraries set up for electronic viewing (to
-         verify, check that there is nothing more than a commented note and
-         an ' ' in the 3 aforementioned _Null libraries) drop the code
-         from the actual library into it's respective Null lib, replacing 
-         the  .
-           (EXAMPLE: Take all the code from Footer.lbi and insert it into
-            Footer_Null.lbi, taking care not to remove the commented note.)
-     
-      b) In the now empty library file, add an  .
-      
-      c) Save the libraries and thier respective Null files.
-
-      d) With a library still open (not a Null one) choose 
-          Modify>Library>Update Pages...
-         Look in: Entire Site
-         Check 'Library Items' in the 'Update:' selection.
-         Hit start.
-
-3.  In RM_H5P.html:
-
-      a) RM_H5P.html contains two versions of the 'C Interfaces' function 
-         list.  One is for print use and one is for electronic use.  
-         One should be visible and one should be commented out.  
-         Make sure that the section labelled with 
-         <!-- FOR USE WITH ELECTRONIC VERSION ---> is commented out.
-         (by removing the >s).
- 
-
-4.  Using HTMLdoc:  
-      
-      a) Open PDF_RM_body.book 
-      
-      b) The Input tab:
-           Document Type: Web Page
-           Input Files:
-             RM_H5Front.html
-             RM_H5.html
-             RM_H5A.html
-             RM_H5D.html
-             RM_H5E.html
-             RM_H5F.html
-             RM_H5G.html
-             RM_H5I.html
-             RM_H5P.html
-             RM_H5R.html
-             RM_H5S.html
-             RM_H5T.html
-             RM_H5Z.html
-             Tools.html
-             PredefDTypes.html
-             Glossary.html
-           Logo Image: none
-           Title File/Image: none
-
-      c) The Output tab:
-           Output To: File
-           Output Path: H5_RM_body.pdf
-           Output Format: PDF
-           Output Options: JPEG Big Images
-           Compression (not critical, change at will): Slider right above 'Fast'
-           JPEG Quality (not critical, change at will): 60
-  
-      d) The Page tab:
-           Page Size: Letter, 2-Sided
-             Top: 0.50in, Left: 1.00in, Right: 0.50in, Bottom: 0.50in
-           Header: Blank, Blank, Blank
-           Footer: Blank, Blank, 1,2,3,...
-           Number Up: 1
-
-      e) The Colors tab:
-           Everything Blank
-           Link Style: Plain
-    
-      f) The Fonts tab:
-           Base Font Size: 11.0
-           Line Spacing: 1.2
-           Body Typeface: Times
-           Heading Typeface: Helvetica
-           Header/Footer Size: 10.0
-           Header/Footer Font: Helvetica
-           Character Set: iso-8859-1
-           Options: Do Not Check 'Embed Fonts'
-
-      g) The PDF tab:
-           PDF Version: 1.3
-           Page Mode: Document
-           Page Layout: Single
-           Page Effect: None
-           Options: Check 'Include Links'
-
-      h) The Security tab:
-           Encryption: No
-
-      i) The Options tab:
-           HTML Editor: Point to Dreamweaver (recommended)
-           Browser Width: 680
-           GUI Option: Check all 3
-
-      j) Save the book file.
-     
-      k) Verify that the output file (H5_RM_body.pdf) is not open.
-
-      l) Generate the document.
-
-5.  Open H5_RM_body.pdf
-    
-      a) Scan through the document page by page to verify that there are no 
-         elements that should have been eliminated via javascripts or swapped 
-         library contents.
-
-      b) Scan through again looking only for places where page breaks need to 
-         be added, removed, or relocated.  I have found that re-generating the 
-         document after every pagination correction actually saves time in the 
-         long run.  This is because some pagination corrections that must be 
-         made may create other problems further down in the document.  
-         Re-generating the document ensures that every problem you focus on 
-         won't have to be re-done.
-
-      c) When you are sure all the pagination is correct (don't forget to 
-         start each of the sections included in the Table of Contents on a 
-         recto) note page numbers for the beginning of each section in the TOC.
-
-6.  Open RM_TOC.html
-
-      a) Edit page numbers accordingly. 
-         (Note: Assuming the general format of RM_H5Front remains the same, 
-          the 'Overview' listing in the TOC should always be on pg. 1, and 
-          the 'Fortran90 and C++ APIs' listing should be on pg. 2, an 
-          exepction to the recto-rule.)
-
-      b) Save.
-
-7.  Using HTMLdoc:
-
-      a) Open PDF_RM_front.book
-
-      b) The Input tab:
-           Document Type: Web Page
-           Input Files:
-             RM_Title.html
-             Copyright.html
-             RM_TOC.html
-           Logo Image: none
-           Title File/Image: none
-
-      c) The Output tab:
-           Output To: File
-           Output Path: H5_RM_front.pdf
-           Output Format: PDF
-           Output Options: JPEG Big Images
-           Compression (not critical, change at will): Slider right above 'Fast'
-           JPEG Quality (not critical, change at will): 60
-  
-      d) The Page tab:
-           Page Size: Letter, 2-Sided
-             Top: 0.50in, Left: 1.00in, Right: 0.50in, Bottom: 0.50in
-           Header: Blank, Blank, Blank
-           Footer: Blank, Blank, Blank
-           Number Up: 1
-
-      e) The Colors tab:
-           Everything Blank
-           Link Style: Plain
-    
-      f) The Fonts tab:
-           Base Font Size: 11.0
-           Line Spacing: 1.2
-           Body Typeface: Times
-           Heading Typeface: Helvetica
-           Header/Footer Size: 10.0
-           Header/Footer Font: Helvetica
-           Character Set: iso-8859-1
-           Options: Do Not Check 'Embed Fonts'
-
-      g) The PDF tab:
-           PDF Version: 1.3
-           Page Mode: Document
-           Page Layout: Single
-           Page Effect: None
-           Options: Check 'Include Links'
-
-      h) The Security tab:
-           Encryption: No
-
-      i) The Options tab:
-           HTML Editor: Point to Dreamweaver (recommended)
-           Browser Width: 680
-           GUI Options: Check all 3
-
-      j) Save the book file.
-     
-      k) Verify that the output file (H5_RM_front.pdf) is not open.
-
-      l) Generate the document.      
-