[svn-r9912] Purpose:

Bug fix

Description:
Dependencies between configure files (aclocal, configure.in, configure,
Makefiles.am and .in) are still causing Makefiles to try to run autotools
during build.

Solution:
Committed all Makefiles.in to update their timestamps.
As a temporary measure, forcibly prevented automake from running
autotools during build by redefining the variables it uses.

Platforms tested:
sleipnir (No changes to Makefile content)

13 files changed, 104 insertions, 1131 deletions

diff --git a/doc/html/ADGuide/Makefile.in b/doc/html/ADGuide/Makefile.in
index 82715bc..dcd2c5f 100644
--- a/doc/html/ADGuide/Makefile.in
+++ b/doc/html/ADGuide/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -339,88 +342,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Graphics/Makefile.in b/doc/html/Graphics/Makefile.in
index e3b554a..f01259d 100644
--- a/doc/html/Graphics/Makefile.in
+++ b/doc/html/Graphics/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -337,88 +340,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Intro/Makefile.in b/doc/html/Intro/Makefile.in
index 9211b99..1ef50d2 100644
--- a/doc/html/Intro/Makefile.in
+++ b/doc/html/Intro/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -337,88 +340,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Makefile.in b/doc/html/Makefile.in
index 2fec127..7eff220 100644
--- a/doc/html/Makefile.in
+++ b/doc/html/Makefile.in
@@ -55,11 +55,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -85,6 +80,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -487,88 +490,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/PSandPDF/Makefile.in b/doc/html/PSandPDF/Makefile.in
index a06fbc0..02f0169 100644
--- a/doc/html/PSandPDF/Makefile.in
+++ b/doc/html/PSandPDF/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -312,88 +315,6 @@ uninstall-am: uninstall-info-am
 	mostlyclean-libtool uninstall uninstall-am uninstall-info-am
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/TechNotes/Makefile.in b/doc/html/TechNotes/Makefile.in
index 0e6cf2c..a299e12 100644
--- a/doc/html/TechNotes/Makefile.in
+++ b/doc/html/TechNotes/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -346,88 +349,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Tutor/Graphics/Makefile.in b/doc/html/Tutor/Graphics/Makefile.in
index 445cdcc..edc0617 100644
--- a/doc/html/Tutor/Graphics/Makefile.in
+++ b/doc/html/Tutor/Graphics/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -345,88 +348,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Tutor/Makefile.in b/doc/html/Tutor/Makefile.in
index e70bd8a..f519656 100644
--- a/doc/html/Tutor/Makefile.in
+++ b/doc/html/Tutor/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -468,88 +471,6 @@ uninstall-info: uninstall-info-recursive
 	uninstall-recursive
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/Tutor/examples/Makefile.in b/doc/html/Tutor/examples/Makefile.in
index d4103fc..5100004 100644
--- a/doc/html/Tutor/examples/Makefile.in
+++ b/doc/html/Tutor/examples/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -380,88 +383,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA \
 	uninstall-localdocDATA uninstall-nobase_localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/cpplus/Makefile.in b/doc/html/cpplus/Makefile.in
index 5b69b40..9a58c44 100644
--- a/doc/html/cpplus/Makefile.in
+++ b/doc/html/cpplus/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -337,88 +340,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/ed_libs/Makefile.in b/doc/html/ed_libs/Makefile.in
index 947a0e9..d41b243 100644
--- a/doc/html/ed_libs/Makefile.in
+++ b/doc/html/ed_libs/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -341,88 +344,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/ed_styles/Makefile.in b/doc/html/ed_styles/Makefile.in
index a453e70..f29aed6 100644
--- a/doc/html/ed_styles/Makefile.in
+++ b/doc/html/ed_styles/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -340,88 +343,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"
diff --git a/doc/html/fortran/Makefile.in b/doc/html/fortran/Makefile.in
index a93a32e..593b32c 100644
--- a/doc/html/fortran/Makefile.in
+++ b/doc/html/fortran/Makefile.in
@@ -51,11 +51,6 @@ pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 top_builddir = ../../..
 
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -81,6 +76,14 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
 
 # Install directories that automake doesn't know about
 includedir = $(exec_prefix)/include
+
+
+# Prevent automake from trying to run autotools during build
+# Temporary fix (I hope!) - JAMES
+ACLOCAL = 
+AUTOCONF = 
+AUTOMAKE = 
+AUTOHEADER = 
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -337,88 +340,6 @@ uninstall-am: uninstall-info-am uninstall-localdocDATA
 	uninstall-localdocDATA
 
 
-# Let automake worry about Makefiles and configure components being up-to-
-# date.
-#
-#
-# The following rules insure that the Makefile is up-to-date by rerunning
-# various autoconf components (although not all versions of make assume
-# that the makefile is implicitly a target).  We use time stamp files to
-# keep track of the most recent update of H5config.h.in and H5config.h
-# because autoheader and config.status don't update the modification time
-# if the contents don't change.
-# Invoke it by "gmake reconfigure".
-#
-# Graphically, the dependencies are:
-#
-#                       configure.in
-#                           |  |
-#         +-----------------+  +------------+
-#         |                                 |
-#      stamp1                           configure
-#   (H5config.h.in)                         |
-#       |  |                                |
-#       |  +---------------+    +-----------+
-#       |                  |    |
-#       |               config.status
-#       |                     |
-#       |  +------------------+
-#       |  |
-#      stamp2
-#    (H5config.h)                   Makefile.in et al
-#         |                                 |
-#         +------------------+  +-----------+
-#                            |  |
-#                          Makefile
-#
-# A side effect of updating stamp1 is to generate H5config.h.in and a
-# side effect of updating stamp2 is to generate H5config.h.  When using
-# a version of make that doesn't treat the makefile as the initial target
-# the user may want to occassionally type `make Makefile' in any source
-# directory.
-# The `Makefile' target has been renamed to `reconfigure' so that the
-# autoconf and make depend processes do not start up automatically.
-# One must do `make reconfigure' explicitedly to start the process.
-# (When srcdir is used and if more than one machines are running,
-# this automatic Makefile/autoconf can get things unstable.)
-#
-#STAMP1=$(top_builddir)/config/stamp1
-#STAMP2=$(top_builddir)/config/stamp2
-
-#MAKEFILE_PARTS=$(srcdir)/Makefile.in            \
-#               $(top_srcdir)/config/commence.am \
-#               $(top_srcdir)/config/conclude.am
-
-#$(STAMP1): $(top_srcdir)/configure.in
-#	touch $(STAMP1)
-#	-cd $(top_srcdir); autoheader
-
-#$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-#	touch $(STAMP2)
-#	-cd $(top_builddir); \
-#	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-# Automake supplies a rule to generate configure
-
-#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-#	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-#reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-#	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-#	@for sub in @subdirs@ dummy; do                                 \
-#	  if test $$sub != dummy; then                                  \
-#	    -cd $$sub; $(MAKE) reconfigure;                             \
-#	  fi;                                                           \
-#	done;
-
-#-----------------------------------------------------------------------------
-# The following section of this makefile comes from the middle of
-# `Makefile.am' from this directory.
-# It was generated by running automake on `Makefile.am' to create
-# `Makefile.in', then running `config.status' to create this Makefile.
-#-----------------------------------------------------------------------------
-
 # Ignore most rules
 lib progs check test _test:
 	@echo "Nothing to be done"