[svn-r2576] Purpose:

	Adding the Fortran interface to the HDF5 library
Description:
	Fortran is now a subdirectory of the HDF5 library tree.
Platforms tested:
	Solaris and IRIX (O2K)

30 files changed, 1879 insertions, 0 deletions

diff --git a/fortran/config/BlankForm b/fortran/config/BlankForm
new file mode 100644
index 0000000..83b6ef5
--- /dev/null
+++ b/fortran/config/BlankForm
@@ -0,0 +1,126 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+
+
+#----------------------------------------------------------------------------
+# Compiler flags. The CPPFLAGS values should not include package debug
+# flags like `-DH5G_DEBUG' since these are added with the
+# `--enable-debug' switch of configure.
+#----------------------------------------------------------------------------
+
+
+# Choosing a C Compiler
+# ---------------------
+#
+# The user should be able to specify the compiler by setting the CC
+# environment variable to the name of the compiler and any switches it 
+# requires for proper operation.  If CC is unset then this script may
+# set it.  If CC is unset by time this script completes then configure 
+# will try `gcc' and `cc' in that order (perhaps some others too).
+#
+# Note: Code later in this file may depend on the value of $CC_BASENAME
+#       in order to distinguish between different compilers when
+#       deciding which compiler command-line switches to use.  This
+#       variable is set based on the incoming value of $CC and is only
+#       used within this file.
+
+if test "X-" =  "X-$CC"; then
+    CC="/some/default/compiler/named/foo -ansi"
+    CC_BASENAME=foo
+fi
+
+
+# C Compiler and Preprocessor Flags
+# ---------------------------------
+#
+# Flags that end with `_CFLAGS' are always passed to the compiler.
+# Flags that end with `_CPPFLAGS' are passed to the compiler when
+# compiling but not when linking.
+#
+# DEBUG_CFLAGS		Flags to pass to the compiler to create a
+# DEBUG_CPPFLAGS	library suitable for use with debugging
+#			tools. Usually this list will exclude
+#			optimization switches (like `-O') and include
+#			switches that turn on symbolic debugging
+#			support (like `-g').
+#
+# PROD_CFLAGS		Flags to pass to the compiler to create a
+# PROD_CPPFLAGS		production version of the library.  These
+#			usualy exclude symbolic debugging switches
+#			(like `-g') and include optimization switches
+#			(like `-O').
+#
+# PROFILE_CFLAGS	Flags to pass to the compiler to create a
+# PROFILE_CPPFLAGS	library suitable for performance testing (like 
+# 			`-pg').  This may or may not include debugging 
+# 			or production flags.
+#			
+# CFLAGS		Flags can be added to this variable which
+#			might already be partially initialized.  These 
+#			flags will always be passed to the compiler
+#			and should include switches to turn on full
+#			warnings.  HDF5 attempts to be ANSI and Posix
+#			compliant and employ good programming
+#			practices resulting in few if any
+#			warnings.
+#
+#			Warning flags do not have to be added to CFLAGS
+#			variable if the compiler is the GNU gcc
+#			compiler or a descendent of gcc such as EGCS or PGCC.
+#
+#			The CFLAGS should contains *something* or else 
+#			configure will probably add `-g'.  For most
+#			systems this isn't a problem but some systems
+#			will disable optimizations in favor of the
+#			`-g'.
+#			
+#
+# These flags should be set according to the compiler being used.
+# There are two ways to check the compiler.  You can try using `-v' or 
+# `--version' to see if the compiler will print a version string.  You 
+# can use the value of $CC_BASENAME which is the base name of the
+# first word in $CC (note that the value of CC may have changed
+# above).
+
+case $CC_BASENAME in
+    gcc)
+	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
+	DEBUG_CFLAGS="-g -fverbose-asm"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O3 -fomit-frame-pointer"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    *)
+	CFLAGS="$CFLAGS -ansi"
+	DEBUG_CFLAGS="-g"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+esac
+
+
+
+# Overriding Configure Tests
+# --------------------------
+#
+# Values for overriding configuration tests when cross compiling.
+# This includes compiling on some machines where the serial front end
+# compiles for a parallel back end.
+
+# Set this to `yes' or `no' depending on whether the target is big
+# endian or little endian.
+#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
+
+# Set this to the width required by printf() to print type `long
+# long'.  For instance, if the format would be `%lld' then set it to
+# `ll' or if the format would be `%qd' set it to `q'.
+#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
diff --git a/fortran/config/commence.in b/fortran/config/commence.in
new file mode 100644
index 0000000..879f27b
--- /dev/null
+++ b/fortran/config/commence.in
@@ -0,0 +1,160 @@
+##------------------------------------------------------------ -*- makefile -*-
+## The following section of this makefile comes from the
+## `./config/commence' file which was generated with config.status
+## from `./config/commence.in'.
+##-----------------------------------------------------------------------------
+
+## Things that Make needs
+.SUFFIXES:
+.SUFFIXES: .c .f90 .o .lo
+@SET_MAKE@
+
+## Directories to search
+@SEARCH@
+
+## Programs
+SHELL=/bin/sh
+CC=@CC@
+F9X=@F9X@
+CFLAGS=@CFLAGS@
+CPPFLAGS=@CPPFLAGS@
+FFLAGS=@FFLAGS@
+LDFLAGS=@LDFLAGS@
+ROOT=@ROOT@
+LIBS=@LIBS@
+AR=@AR@
+RANLIB=@RANLIB@
+RM=rm -f
+CP=cp
+INSTALL=@INSTALL@
+INSTALL_PROGRAM=@INSTALL_PROGRAM@
+INSTALL_DATA=@INSTALL_DATA@
+PARALLEL=@PARALLEL@
+RUNSERIAL=@RUNSERIAL@
+RUNPARALLEL=@RUNPARALLEL@
+RUNTEST=$(RUNSERIAL)
+TRACE=:
+
+## Installation points
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+bindir=@bindir@
+libdir=@libdir@
+includedir=@includedir@
+docdir=@exec_prefix@/doc
+PUB_LIB=$(LIB)
+
+## Shared libraries
+DYNAMIC_DIRS=@DYNAMIC_DIRS@
+LT=$(top_builddir)/libtool
+LT_CCOMPILE=$(LT) --mode=compile $(CC)
+LT_LINK_CLIB=$(LT) --mode=link $(CC) -rpath $(libdir)
+LT_LINK_CEXE=$(LT) --mode=link $(CC) $(DYNAMIC_DIRS) -rpath $(bindir)
+LT_RUN=$(LT) --mode=execute
+LT_INSTALL_PROG=$(LT) --mode=install $(INSTALL_PROGRAM)
+LT_INSTALL_LIB=$(LT) --mode=install $(INSTALL_DATA)
+LT_UNINSTALL=$(LT) --mode=uninstall $(RM)
+
+# Fortran compilation/linking stuff
+LT_FCOMPILE=$(LT) --mode=compile $(F9X)
+LT_LINK_FLIB=$(LT) --mode=link $(F9X) -static $(DYNAMIC_DIRS)
+LT_LINK_FEXE=$(LT) --mode=link $(F9X) -static $(DYNAMIC_DIRS)
+
+## Optional variables. We must declare them here because Irix pmake
+## complains if it sees a reference to a variable which has never been
+## defined. The main makefile is free to redefine these to something else.
+DOCDIR=$(docdir)
+LIB=
+LIB_SRC=
+LIB_OBJ=
+PUB_HDR=
+PUB_PROGS=
+PROGS=
+TEST_PROGS=
+TEST_FLAGS=
+TEST_SCRIPTS=
+
+## The default is to build the library and/or programs.  We must build
+## them sequentially.
+all:
+	$(MAKE) lib
+	$(MAKE) progs
+	$(MAKE) tests
+
+## The following rules insure that the Makefile is up-to-date by rerunning
+## various autoconf components (although not all versions of make assume
+## that the makefile is implicitly a target).  We use time stamp files to
+## keep track of the most recent update of H5config.h.in and H5config.h
+## because autoheader and config.status don't update the modification time
+## if the contents don't change.
+## Invoke it by "gmake reconfigure".
+##
+## Graphically, the dependencies are:
+##
+##		         configure.in
+##                           |  |
+##         +-----------------+  +------------+
+##         |                                 |
+##      stamp1                           configure
+##   (H5config.h.in)                         |
+##       |  |                                |
+##       |  +---------------+    +-----------+
+##       |                  |    |
+##       |               config.status
+##       |                     |
+##       |  +------------------+
+##       |  |
+##      stamp2
+##    (H5config.h)                   Makefile.in et al
+##         |                                 |
+##         +------------------+  +-----------+
+##                            |  |
+##                          Makefile
+##
+## A side effect of updating stamp1 is to generate H5config.h.in and a
+## side effect of updating stamp2 is to generate H5config.h.  When using
+## a version of make that doesn't treat the makefile as the initial target
+## the user may want to occassionally type `make Makefile' in any source
+## directory.
+## The `Makefile' target has been renamed to `reconfigure' so that the
+## autoconf and make depend processes do not start up automatically.
+## One must do `make reconfigure' explicitedly to start the process.
+## (When srcdir is used and if more than one machines are running,
+## this automatic Makefile/autoconf can get things unstable.)
+##
+STAMP1=$(top_builddir)/config/stamp1
+STAMP2=$(top_builddir)/config/stamp2
+
+MAKEFILE_PARTS=$(srcdir)/Makefile.in		\
+	       $(top_srcdir)/config/commence.in	\
+	       $(top_srcdir)/config/conclude.in	\
+	       $(top_srcdir)/config/depend1.in	\
+	       $(top_srcdir)/config/depend2.in	\
+	       $(top_srcdir)/config/depend3.in	\
+	       $(top_srcdir)/config/depend4.in	\
+	       $(top_srcdir)/config/dependN.in
+
+$(STAMP1): $(top_srcdir)/configure.in
+	touch $(STAMP1)
+	-cd $(top_srcdir); autoheader
+
+$(STAMP2): $(STAMP1) $(top_builddir)/config.status
+	touch $(STAMP2)
+	-cd $(top_builddir); \
+	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
+
+$(top_srcdir)/configure: $(top_srcdir)/configure.in
+	-cd $(top_srcdir); autoconf
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
+	-cd $(top_builddir); ./config.status --recheck
+
+# rerun the autoconf process if any configure components have changed. 
+reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
+	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
+
+##-----------------------------------------------------------------------------
+## The following section of this makefile comes from the middle of
+## `Makefile.in' from this directory.  It was generated by running
+## `config.status'.
+##-----------------------------------------------------------------------------
diff --git a/fortran/config/conclude.in b/fortran/config/conclude.in
new file mode 100644
index 0000000..2f3c11e
--- /dev/null
+++ b/fortran/config/conclude.in
@@ -0,0 +1,185 @@
+##------------------------------------------------------------ -*- makefile -*-
+## The following section of this makefile comes from the
+## `./config/conclude' file which was generated with config.status
+## from `./config/conclude.in'.
+##-----------------------------------------------------------------------------
+
+## This is the target for the library described in the main body of the
+## makefile.
+##
+lib: $(LIB)
+$(LIB) __no_library__: $(LIB_OBJ)
+	@$(LT_LINK_FLIB) -o $@ $(FFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS)
+
+progs: $(LIB) $(PROGS)
+
+## Build a tags file in this directory.
+TAGS: $(LIB_SRC)
+	$(RM) $@
+	-etags $(LIB_SRC)
+
+## Runs each test in order, passing $(TEST_FLAGS) to the program.
+tests: $(TEST_PROGS) $(LIB)
+check test _test: tests
+	@for test in $(TEST_PROGS) dummy; do                                  \
+	   if test $$test != dummy; then				      \
+	      echo "============================";			      \
+	      echo "Testing $$test $(TEST_FLAGS)";			      \
+	      echo "============================";			      \
+	      PATH=".:$$PATH" srcdir=$(srcdir)				      \
+		 $(RUNTEST) $$test $(TEST_FLAGS) ||			      \
+		 exit 1;						      \
+	      echo "";							      \
+	   fi;								      \
+	done;
+	@for test in $(TEST_SCRIPTS) dummy; do                                \
+	   if test $$test != dummy; then				      \
+	      echo "============================";			      \
+	      echo "Testing $$test $(TEST_FLAGS)";			      \
+	      echo "============================";			      \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir=$(srcdir)						      \
+		 /bin/sh $$test $(TEST_FLAGS) ||		              \
+		 exit 1;						      \
+	      echo "";							      \
+	   fi;								      \
+	done;
+
+## Make installation directories directories if they don't exist.
+$(libdir):
+	mkdir $@ && chmod 755 $@
+
+$(includedir):
+	mkdir $@ && chmod 755 $@
+
+$(bindir):
+	mkdir $@ && chmod 755 $@
+
+$(DOCDIR):
+	mkdir $@ && chmod 755 $@
+
+## Install the library, the public header files, and public programs.
+install: $(PUB_LIB) $(PUB_HDR) $(PUB_PROGS) $(libdir) $(includedir) $(bindir)
+	@for f in X $(PUB_LIB); do					      \
+	   if test $$f != X; then					      \
+	      ($(LT_INSTALL_LIB) $$f $(libdir)/. || exit 1);		      \
+	   fi;								      \
+	done
+	@if test -f libhdf5.settings; then				      \
+	   (set -x; $(INSTALL_DATA) libhdf5.settings $(libdir)/. || exit 1);  \
+	fi
+	@for f in X $(PUB_HDR); do					      \
+	   if test $$f != X; then					      \
+	      if test -f $$f; then					      \
+		 (set -x; $(INSTALL_DATA) $$f $(includedir)/. || exit 1);     \
+	      else							      \
+	         (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(includedir)/. ||    \
+		    exit 1);						      \
+	      fi;							      \
+	   fi;								      \
+	done
+	@for f in X $(PUB_PROGS); do					      \
+	   if test $$f != X; then					      \
+	     ($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1);		      \
+	   fi;							              \
+	done
+
+## Install the documents.
+install-doc: $(PUB_DOCS) $(DOCDIR)
+	@for d in X $(SUBDIRS); do					      \
+	    if test $$d != X; then					      \
+	       (set -x; cd $$d && $(MAKE) $@) || exit 1;                      \
+	    fi;								      \
+	done
+	@for f in X $(PUB_DOCS); do					      \
+	   if test $$f != X; then					      \
+	      if test -f $$f; then					      \
+		 (set -x; $(INSTALL_DATA) $$f $(DOCDIR)/. || exit 1);         \
+	      else							      \
+	         (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(DOCDIR)/. ||        \
+		    exit 1);						      \
+	      fi;							      \
+	   fi;								      \
+	done
+
+## Removes those things that `make install' (would have) installed.
+uninstall:
+	@for f in libhdf5.settings $(LIB); do				      \
+            $(LT_UNINSTALL) $(libdir)/$$f;				      \
+	done
+	@if test "X$(PUB_HDR)" != X; then				      \
+	   set -x; cd $(includedir) && $(RM) $(PUB_HDR);		      \
+	fi
+	@for f in X $(PUB_PROGS); do					      \
+	    if test $$f != X; then					      \
+	        $(LT_UNINSTALL) $(bindir)/$$f;				      \
+	    fi;								      \
+	done
+
+## Removes those things that `make install-doc' (would have) installed.
+uninstall-doc:
+	@for d in X $(SUBDIRS); do					      \
+	    if test $$d != X; then					      \
+	       (set -x; cd $$d && $(MAKE) $@) || exit 1;                      \
+	    fi;								      \
+	done
+	@if test "X$(PUB_DOCS)" != X; then				      \
+	   set -x; cd $(DOCDIR) && $(RM) $(PUB_DOCS);			      \
+	fi
+
+## Removes temporary files without removing the final target files.  That is,
+## remove things like object files but not libraries or executables.
+##
+mostlyclean:
+	-$(RM) $(LIB_OBJ) $(LIB_OBJ:.lo=.o)
+	-$(RM) $(TEST_OBJ) $(TEST_OBJ:.lo=.o)
+	-$(RM) $(PROG_OBJ) $(PROG_OBJ:.lo=.o) $(MOSTLYCLEAN)
+
+## Like `mostlyclean' except it also removes the final targets: things like
+## libraries and executables.  This target doesn't remove any file that
+## is part of the HDF5 distribution.
+##
+clean: mostlyclean
+	-$(RM) $(LIB) $(TEST_PROGS) $(PROGS) $(CLEAN)
+	-$(RM) *.M *.a *.mod
+	-$(RM) -r .libs
+
+## Like `clean' except it also removes files that were created by running
+## configure.  If you've unpacked the source and built HDF5 without creating
+## any other files, then `make distclean' will leave only the files that were
+## in the distribution.
+##
+distclean: clean
+	-$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN)
+	@if test -f $(srcdir)/Makefile.in; then				      \
+	   (set -x; $(RM) Makefile);					      \
+	fi
+
+
+## Like `distclean' except it deletes all files that can be regenerated from
+## the makefile, including those generated from autoheader and autoconf.
+##
+maintainer-clean: distclean
+	-$(RM) *~ core core.* *.core *.bak *.contrib gmon.out
+
+## Implicit rules
+.c.o:
+	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
+
+.c.lo:
+	@$(LT_CCOMPILE) $(CFLAGS) $(CPPFLAGS) -c $<
+
+.f90.o:
+	$(F9X) $(FFLAGS) -c $<
+
+.f90.lo:
+	@$(LT_FCOMPILE) $(FFLAGS) -c $<
+
+##-----------------------------------------------------------------------------
+## The following section of this makefile contains dependencies between the
+## source files and the header files.
+##-----------------------------------------------------------------------------
+.PHONY: dep depend
+dep depend: Dependencies
+
+@DEPEND@
diff --git a/fortran/config/dec-flags b/fortran/config/dec-flags
new file mode 100644
index 0000000..c9a34b3
--- /dev/null
+++ b/fortran/config/dec-flags
@@ -0,0 +1,92 @@
+#							-*- shell-script -*-
+#
+# This file should be sourced into configure if the compiler is a DEC
+# compiler.  It is careful not to do anything if the compiler is not
+# DEC; otherwise `cc_flags_set' is set to `yes'
+#
+
+# Get the compiler version unless it's already known.
+#
+#   cc_vendor:    The compiler vendor: DEC
+#   cc_version:   Version number, like: V5.2-038
+#
+if test X = "X$cc_flags_set"; then
+    cc_vendor=DEC
+    cc_version="`$CC $CFLAGS -V 2>&1 |head -1 |\
+	        sed 's/.*DEC C \(V[0-9][-\.0-9]*\).*/\1/'`"
+    if test X != "$gcc_version"; then
+	echo "compiler '$CC' is $cc_vendor-$cc_version"
+    else
+        cc_vendor=
+    fi
+fi
+
+# Warn about old compilers that don't work right.
+case "$cc_vendor-$cc_version" in
+    DEC-V5.2-038)
+        cat <<EOF
+    **
+    ** This compiler may generate incorrect code when optimizations are
+    ** enabled. Please upgrade to a newer version (we're not sure which
+    ** version actually works) before reporting bugs to the HDF5 team.
+    **
+EOF
+	sleep 5
+	;;
+esac
+
+# Compiler flags
+case "$cc_vendor-$cc_version" in
+    DEC-V5.*)
+	# Production
+	PROD_CFLAGS="-g0 -verbose -warnprotos -std -O4 $ARCH -ansi_args -fp_reorder -readonly_strings -inline speed"
+	PROD_CPPFLAGS="-D_INTRINSICS -D_INLINE_INTRINSICS"
+
+	# Debug
+	DEBUG_CFLAGS="-g -std -verbose -warnprotos"
+	DEBUG_CPPFLAGS=
+
+	# Profile
+	PROFILE_CFLAGS="-pg -std -verbose -warnprotos"
+	PROFILE_CPPFLAGS=
+
+	# Flags are set
+	cc_flags_set=yes
+	;;
+esac
+
+# If no flags were set then clear the compiler vendor and version info.
+if test X = "X$cc_flags_set"; then
+    cc_vendor=
+    cc_version=
+fi
+
+# The default Fortran 90 compiler
+
+#
+# HDF5 integers
+#
+# 	R_LARGE is the number of digits for the bigest integer supported.
+#	R_INTEGER is the number of digits in INTEGER
+#
+# (for the Digital UNIX architechture)
+#
+R_LARGE=18
+R_INTEGER=9
+HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HID_T='SELECTED_INT_KIND(R_INTEGER)'
+SIZE_T='SELECTED_INT_KIND(R_LARGE)'
+OBJECT_NAMELEN_DEFAULT_F=-1
+
+if test "X-" = "X-$F9X"; then
+    F9X=f90
+fi
+
+if test "X-" = "X-$f9x_flags_set"; then
+    FFLAGS="-Olimit 2048 -std1"
+    DEBUG_FFLAGS="-Olimit 2048 -std1"
+    PROD_FFLAGS="-Olimit 2048 -std1"
+    PROFILE_FFLAGS="-Olimit 2048 -std1"
+    f9x_flags_set=yes
+fi
diff --git a/fortran/config/dec-osf4.x b/fortran/config/dec-osf4.x
new file mode 100644
index 0000000..bad4669
--- /dev/null
+++ b/fortran/config/dec-osf4.x
@@ -0,0 +1,20 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for detailed information.
+
+# The default compiler is `cc'
+if test "X-" =  "X-$CC"; then
+    CC=cc
+    CC_BASENAME=cc
+fi
+
+# Try GNU compiler flags.
+. $srcdir/config/gnu-flags
+
+# Try native DEC compiler
+ARCH=${ARCH:='-arch host -tune host'}
+. $srcdir/config/dec-flags
diff --git a/fortran/config/depend b/fortran/config/depend
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/fortran/config/depend
diff --git a/fortran/config/depend1.in b/fortran/config/depend1.in
new file mode 100644
index 0000000..4a24846
--- /dev/null
+++ b/fortran/config/depend1.in
@@ -0,0 +1,60 @@
+##                                                             -*- makefile -*-
+
+## We keep a list of dependencies in `.depend' for each of the source
+## files on which it depends.  When one of the source files is modified
+## we remove its record from .depend and regenerate its dependencies,
+## tacking them onto the end of .depend.  By including the .depend file
+## into the makefile, we're telling make that the makefile depends on
+## the dependency list in the .depend file.
+##
+## This is as fast as the `.d' method described in the GNU make manual
+## for automatic dependencies, but has the added advantage that all
+## dependencies are stored in one place.  The advantage over the
+## `makedepend' program is that only those files that are out of date
+## have dependency information rebuilt, and the Makefile is not
+## modified.
+##
+## This is also where tracing information is updated.  The $(TRACE)
+## program is run on each source file to make sure that the H5TRACE()
+## macros are up to date.  If they are then the file is not modified,
+## otherwise the file is changed and a backup is saved by appending a
+## tilde to the file name.
+##
+.PRECIOUS: Dependencies
+Dependencies: .depend
+	@if test "$(srcdir)" != "."; then				      \
+	    echo '## This file is machine generated on GNU systems.'          \
+		>$@;							      \
+	    echo '## Only temporary changes may be made here.' 		      \
+		>>$@;							      \
+	    echo >>$@;					      \
+	    perl -p $(top_srcdir)/bin/distdep .depend >>$@;		      \
+	fi
+
+.PRECIOUS: .depend
+.depend: $(LIB_SRC) $(TEST_SRC) $(PROG_SRC)
+	@touch .depend
+	@for dep in $? dummy; do					      \
+	   if [ $$dep != "dummy" ]; then				      \
+	      echo Building dependencies for $$dep;			      \
+	      obj=`basename $$dep .c`.lo;				      \
+	      sed '\%^'"$$obj"':%,\%[^\\]$$%d' <$@ >$@- && mv $@- $@;	      \
+	      $(TRACE) $$dep;						      \
+	      $(CC) -M -MG $(CPPFLAGS) $$dep 2>/dev/null |		      \
+                  sed 's% $(srcdir)/% $$(srcdir)/%g' |                        \
+                  sed 's% $(top_srcdir)/% $$(top_srcdir)/%g' |                \
+                  sed 's% $(top_builddir)/% $$(top_builddir)/%g' |            \
+	          sed 's/\.o/.lo/' >>$@;	      			      \
+	   fi;								      \
+	done;
+	@if test "$(srcdir)" != "."; then				      \
+	    echo '## This file is machine generated on GNU systems.'          \
+		>Dependencies;				      \
+	    echo '## Only temporary changes may be made here.' 		      \
+		>>Dependencies;				      \
+	    echo >>Dependencies;				      \
+	    perl -p $(top_srcdir)/bin/distdep .depend>>Dependencies;\
+	fi
+
+-include .depend
+
diff --git a/fortran/config/depend2.in b/fortran/config/depend2.in
new file mode 100644
index 0000000..ae49989
--- /dev/null
+++ b/fortran/config/depend2.in
@@ -0,0 +1,11 @@
+##							       -*- makefile -*-
+
+## This platform doesn't support automatic dependencies because we're
+## not using GNU gcc.  GNU gcc is needed in order to generate the list
+## of header files included by a source file.
+
+## Since automatic dependencies are not being used, we attempt to include the
+## `.distdep' file from the source tree. This file was automatically generated 
+## on some system that satisfies the above requirements.
+
+-include Dependencies
diff --git a/fortran/config/depend3.in b/fortran/config/depend3.in
new file mode 100644
index 0000000..26056d2
--- /dev/null
+++ b/fortran/config/depend3.in
@@ -0,0 +1,7 @@
+##							       -*- makefile -*-
+
+## Since automatic dependencies are not being used, we attempt to include the
+## `.distdep' file from the source tree. This file was automatically generated 
+## on some system that satisfies the above requirements.
+
+.include <Dependencies>
diff --git a/fortran/config/depend4.in b/fortran/config/depend4.in
new file mode 100644
index 0000000..84e0f53
--- /dev/null
+++ b/fortran/config/depend4.in
@@ -0,0 +1,7 @@
+##							       -*- makefile -*-
+
+## Since automatic dependencies are not being used, we attempt to include the
+## `.distdep' file from the source tree. This file was automatically generated 
+## on some system that satisfies the above requirements.
+
+include Dependencies
diff --git a/fortran/config/dependN.in b/fortran/config/dependN.in
new file mode 100644
index 0000000..7ece270
--- /dev/null
+++ b/fortran/config/dependN.in
@@ -0,0 +1,4 @@
+##							       -*- makefile -*-
+
+## Automatic dependencies are not being used and we cannot include other
+## files.
diff --git a/fortran/config/freebsd b/fortran/config/freebsd
new file mode 100644
index 0000000..8608a85
--- /dev/null
+++ b/fortran/config/freebsd
@@ -0,0 +1,21 @@
+#							-*- shell-script -*-
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# The default compiler is `gcc'
+if test "X-" = "X-$CC"; then
+    CC=gcc
+    CC_BASENAME=gcc
+fi
+
+# Architecture-specific flags
+ARCH=
+
+# Omit frame pointer for optimized code?
+NOFP=${NOFP:=-fomit-frame-pointer}
+
+# Figure out compiler flags
+. $srcdir/config/gnu-flags
diff --git a/fortran/config/gnu-flags b/fortran/config/gnu-flags
new file mode 100644
index 0000000..99c9419
--- /dev/null
+++ b/fortran/config/gnu-flags
@@ -0,0 +1,227 @@
+#							-*- shell-script -*-
+#
+# This file should be sourced into configure if the compiler is the
+# GNU gcc compiler or a derivative.  It is careful not to do anything
+# if the compiler is not GNU; otherwise `cc_flags_set' is set to `yes'
+#
+
+# Get the compiler version in a way that works for gcc, egcs, and
+# pgcc unless a compiler version is already known
+#
+#   cc_vendor:    The compiler name: gcc, egcs, or pgcc
+#   cc_version:   Version number: 2.91.60, 2.7.2.1
+#
+if test X = "X$cc_flags_set"; then
+    cc_version="`$CC $CFLAGS -v 2>&1 |grep 'gcc version' |\
+	        sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`"
+    cc_vendor=`echo $cc_version |sed 's/\([a-z]*\).*/\1/'`
+    cc_version=`echo $cc_version |sed 's/[-a-z]//g'`
+    if test X = "X$cc_vendor" -a X != "X$cc_version"; then
+	cc_vendor=gcc
+    fi
+    if test "-" != "$cc_vendor-$cc_version"; then
+	echo "compiler '$CC' is GNU $cc_vendor-$cc_version"
+    fi
+
+    # Some version numbers
+    cc_vers_major=`echo $cc_version | cut -f1 -d.`
+    cc_vers_minor=`echo $cc_version | cut -f2 -d.`
+    cc_vers_patch=`echo $cc_version | cut -f3 -d.`
+    test -n "$cc_vers_major" || cc_vers_major=0
+    test -n "$cc_vers_minor" || cc_vers_minor=0
+    test -n "$cc_vers_patch" || cc_vers_patch=0
+    cc_vers_all=`expr $cc_vers_major '*' 1000000 + $cc_vers_minor '*' 1000 + $cc_vers_patch`
+fi
+
+# GCC compilers before gcc-2.8.1 have problems with `long long'.
+if test gcc = $cc_vendor -a $cc_vers_all -lt 2008001; then
+    cat <<EOF
+    **
+    ** This compiler may be unable to properly compile the long long
+    ** data type used extensively by hdf5, although specifying
+    ** --disable-hsizet for configure may work around those bugs.
+    ** There may be other code generation problems also, especially
+    ** when optimizations are enabled.  Please upgrade to at least GNU
+    ** gcc version 2.8.1 before reporting bugs to the HDF5 team.
+    **
+EOF
+    sleep 5
+
+# Current EGCS compilers have problems with `long long' and register
+# allocation when optimizations are turned on for x86 systems.
+elif test egcs = $cc_vendor -a $cc_vers_all -le 2091066; then
+    cat <<EOF
+    **
+    ** This compiler may have problems allocating registers when
+    ** optimizations are enabled on some platforms. Specifying
+    ** --disable-hsizet usually avoids the bug.
+    **
+EOF
+    sleep 5
+
+# All current versions of PGCC have problems also.
+elif test pgcc = $cc_vendor -a $cc_vers_all -le 2091066; then	    
+    cat <<EOF
+    **
+    ** This compiler may have problems allocating registers for long
+    ** long data types when optimizations are enabled. There may be
+    ** other code generation problems as well. We know of no version
+    ** of pgcc which is capable of compiling HDF5 in production mode.
+    ** Please use gcc-2.8 or egcs-1.1.1 before reporting bugs.
+    **
+EOF
+    sleep 5
+
+fi
+
+# Architecture-specific flags
+case "$host_os-$host_cpu" in
+    # FreeBSD sets the information from "hostname -m" to the general machine
+    # architecture, not the specific CPU for the machine, so even our
+    # Pentium II Xeon server is set to "i386".  Once we know we are on a FreeBSD
+    # machine, use the "sysctl" command to get the CPU hardware model.
+    freebsd*)
+        host_cpu_model=`sysctl -n hw.model`
+        case "$host_cpu_model" in
+            # Hmm.. this might not catch Celerons, but it won't hurt them either...
+            *Pro*|*II*)
+                # This check should be kept in sync with the *-i686 check below
+                case "$cc_vendor-$cc_version" in
+                    gcc-2.95*)
+                        ARCH=${ARCH:="-march=i686 -malign-double"}
+                        ;;
+                    gcc-*|egcs-*|pgcc-*)
+                        ARCH=${ARCH:="-mcpu=pentiumpro -march=pentiumpro -malign-double"}
+                        ;;
+                esac
+            ;;
+        esac
+        ;;
+
+    *-i686)
+        case "$cc_vendor-$cc_version" in
+            gcc-2.95*)
+                ARCH=${ARCH:="-march=i686 -malign-double"}
+                ;;
+            gcc-*|egcs-*|pgcc-*)
+                ARCH=${ARCH:="-mcpu=pentiumpro -march=pentiumpro -malign-double"}
+                ;;
+        esac
+        ;;
+esac
+
+# Host-specific flags
+case "`hostname`" in
+    hawkwind.ncsa.uiuc.edu)
+        ARCH="$ARCH -pipe"
+        ;;
+esac
+
+# Compiler flags
+case "$cc_vendor-$cc_version" in
+    gcc-2.7*)
+	# General
+	CFLAGS="$CFLAGS $ARCH -ansi"
+
+	# Production
+	PROC_CFLAGS="-O3 $NOFP -finline-functions -Wno-shadow"
+	PROD_CPPFLAGS=
+
+	# Debug
+	DEBUG_CFLAGS="-g -fverbose-asm -Wno-shadow"
+	DEBUG_CPPFLAGS=
+
+	# Profile
+	PROFILE_CFLAGS=-pg
+	PROFILE_CPPFLAGS=
+
+	# Flags are set
+	cc_flags_set=yes
+	;;
+
+    gcc-2.8.*)
+        # General
+        CFLAGS="$CFLAGS $ARCH -Wsign-compare"
+
+	# Production
+	PROD_CFLAGS="-O3 $NOFP -finline-functions -fschedule-insns2 -Wno-shadow"
+	PROD_CPPFLAGS=
+
+	# Debug
+	DEBUG_CFLAGS="-g -fverbose-asm -Wno-shadow"
+	DEBUG_CPPFLAGS=
+
+	# Profile
+	PROFILE_CFLAGS=-pg
+	PROFILE_CPPFLAGS=
+
+	# Flags are set
+	cc_flags_set=yes
+	;;
+
+    gcc-2.95*)
+	# General
+	CFLAGS="$CFLAGS $ARCH -Wsign-compare"
+
+	# Production
+	PROD_CFLAGS="-O6 $NOFP -Wno-shadow"
+	PROD_CPPFLAGS=
+
+	# Debug
+	DEBUG_CFLAGS="-g -fverbose-asm -Wno-shadow"
+	DEBUG_CPPFLAGS=
+
+	# Profile
+	PROFILE_CFLAGS=-pg
+	PROFILE_CPPFLAGS=
+
+	# Flags are set
+	cc_flags_set=yes
+	;;
+
+    egcs-2.*|pgcc-2.*)
+	# General
+	CFLAGS="$CFLAGS $ARCH -Wsign-compare"
+
+	# Production
+	PROD_CFLAGS="-O6 $NOFP -Wno-shadow"
+	PROD_CPPFLAGS=
+
+	# Debug
+	DEBUG_CFLAGS="-g -fverbose-asm -Wno-shadow"
+	DEBUG_CPPFLAGS=
+
+	# Profile
+	PROFILE_CFLAGS=-pg
+	PROFILE_CPPFLAGS=
+
+	# Flags are set
+	cc_flags_set=yes
+	;;
+
+    gcc-*|egcs-*|pgcc-*)
+        # This must be some other GNU compiler that we don't know about.
+        # Just use fairly generic flags.
+
+	# Production
+	PROD_CFLAGS=-O
+	PROD_CPPFLAGS=
+
+	# Debug
+	DEBUG_CFLAGS=-g
+	DEBUG_CPPFLAGS=
+
+	# Profile
+	PROFILE_CFLAGS=-pg
+	PROFILE_CPPFLAGS=
+
+	# Flags are set
+	cc_flags_set=yes
+	;;
+esac
+
+# Clear cc info if no flags set
+if test X = "X$cc_flags_set"; then
+    cc_vendor=
+    cc_version=
+fi
diff --git a/fortran/config/hpux10.20 b/fortran/config/hpux10.20
new file mode 100644
index 0000000..0b39f3c
--- /dev/null
+++ b/fortran/config/hpux10.20
@@ -0,0 +1,36 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# Default compiler is `cc'
+if test "X-" =  "X-$CC"; then
+    CC=cc
+    CC_BASENAME=cc
+fi
+
+# Flags
+case "X-$CC" in
+    X-gcc)
+	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
+	DEBUG_CFLAGS="-g -fverbose-asm"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O3"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    *)
+	CFLAGS="$CFLAGS -Ae"
+	DEBUG_CFLAGS=-g
+	DEBUG_CPPFLAGS="-Ae"
+	PROD_CFLAGS=-O
+	PROD_CPPFLAGS="-Ae"
+	PROFILE_CFLAGS=
+	PROFILE_CPPFLAGS="-Ae"
+	;;
+esac
diff --git a/fortran/config/hpux11.00 b/fortran/config/hpux11.00
new file mode 100644
index 0000000..0b39f3c
--- /dev/null
+++ b/fortran/config/hpux11.00
@@ -0,0 +1,36 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# Default compiler is `cc'
+if test "X-" =  "X-$CC"; then
+    CC=cc
+    CC_BASENAME=cc
+fi
+
+# Flags
+case "X-$CC" in
+    X-gcc)
+	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
+	DEBUG_CFLAGS="-g -fverbose-asm"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O3"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    *)
+	CFLAGS="$CFLAGS -Ae"
+	DEBUG_CFLAGS=-g
+	DEBUG_CPPFLAGS="-Ae"
+	PROD_CFLAGS=-O
+	PROD_CPPFLAGS="-Ae"
+	PROFILE_CFLAGS=
+	PROFILE_CPPFLAGS="-Ae"
+	;;
+esac
diff --git a/fortran/config/hpux9.03 b/fortran/config/hpux9.03
new file mode 100644
index 0000000..abed0b3
--- /dev/null
+++ b/fortran/config/hpux9.03
@@ -0,0 +1,36 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details
+
+# Default compiler is `cc'
+if test "X-" =  "X-$CC"; then
+    CC=cc
+    CC_BASENAME=cc
+fi
+
+# Flags
+case "X-$CC" in
+    X-gcc)
+	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
+	DEBUG_CFLAGS="-g -fverbose-asm"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O3"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    *)
+	CFLAGS="$CFLAGS -Ae"
+	DEBUG_CFLAGS=-g
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS=
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS=
+	PROFILE_CPPFLAGS=
+	;;
+esac
diff --git a/fortran/config/i386-pc-cygwin32 b/fortran/config/i386-pc-cygwin32
new file mode 100644
index 0000000..4054819
--- /dev/null
+++ b/fortran/config/i386-pc-cygwin32
@@ -0,0 +1,20 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# The default compiler is `gcc'.
+if test "X-" =  "X-$CC"; then
+    CC=gcc
+    CC_BASENAME=gcc
+    LD=ld
+fi
+
+# Omit frame pointer for optimized code?
+NOFP=${NOFP:=-fomit-frame-pointer}
+
+# Figure out compiler flags
+. $srcdir/config/gnu-flags
diff --git a/fortran/config/intel-osf1 b/fortran/config/intel-osf1
new file mode 100644
index 0000000..0b50c4f
--- /dev/null
+++ b/fortran/config/intel-osf1
@@ -0,0 +1,83 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# This is for the ASCI RED TFLOPS machine
+
+# The default compiler is `cicc'
+if test "X-" =  "X-$CC"; then
+    CC=cicc
+    CC_BASENAME=cicc
+fi
+
+# The default archiver is `xar'
+AR=${AR:-xar}
+
+# There is no ranlib
+RANLIB=:
+
+# Additional libraries
+LDFLAGS="$LDFLAGS -lnoop_stubs"
+
+# How to run serial and parallel test programs
+RUNSERIAL="yod -sz 1"
+RUNPARALLEL="yod -sz 8"
+
+# What must *always* be present for things to compile correctly?
+#CPPFLAGS="$CPPFLAGS -I."
+
+# What compiler flags should be used for code development?
+DEBUG_CFLAGS=-g
+DEBUG_CPPFLAGS=
+
+# What compiler flags should be used for building a production
+# library?
+PROD_CFLAGS=-O
+PROD_CPPFLAGS=
+
+# What compiler flags enable code profiling?
+PROFILE_CFLAGS=-pg
+PROFILE_CPPFLAGS=
+
+# Turn off shared lib option.  It does not work for TFLOPS yet.
+enable_shared="${enable_shared:-no}"
+
+# Set this to the width required by printf() to print type `long
+# long'.  For instance, if the format would be `%lld' then set it to
+# `ll' or if the format would be `%qd' set it to `q'.
+hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
+
+# Hard set sizeof_intN_t to 0 because they are not supported.
+ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t='0'}
+ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t='0'}
+ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t='0'}
+ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t='0'}
+ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t='0'}
+ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t='0'}
+ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t='0'}
+ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t='0'}
+
+# Hard set sizeof_int_leastN_t to 0 because they are not supported.
+ac_cv_sizeof_int_least8_t=${ac_cv_sizeof_int_least8_t='0'}
+ac_cv_sizeof_int_least16_t=${ac_cv_sizeof_int_least16_t='0'}
+ac_cv_sizeof_int_least32_t=${ac_cv_sizeof_int_least32_t='0'}
+ac_cv_sizeof_int_least64_t=${ac_cv_sizeof_int_least64_t='0'}
+ac_cv_sizeof_uint_least8_t=${ac_cv_sizeof_uint_least8_t='0'}
+ac_cv_sizeof_uint_least16_t=${ac_cv_sizeof_uint_least16_t='0'}
+ac_cv_sizeof_uint_least32_t=${ac_cv_sizeof_uint_least32_t='0'}
+ac_cv_sizeof_uint_least64_t=${ac_cv_sizeof_uint_least64_t='0'}
+
+# Hard set sizeof_int_fastN_t to 0 because they are not supported.
+ac_cv_sizeof_int_fast8_t=${ac_cv_sizeof_int_fast8_t='0'}
+ac_cv_sizeof_int_fast16_t=${ac_cv_sizeof_int_fast16_t='0'}
+ac_cv_sizeof_int_fast32_t=${ac_cv_sizeof_int_fast32_t='0'}
+ac_cv_sizeof_int_fast64_t=${ac_cv_sizeof_int_fast64_t='0'}
+ac_cv_sizeof_uint_fast8_t=${ac_cv_sizeof_uint_fast8_t='0'}
+ac_cv_sizeof_uint_fast16_t=${ac_cv_sizeof_uint_fast16_t='0'}
+ac_cv_sizeof_uint_fast32_t=${ac_cv_sizeof_uint_fast32_t='0'}
+ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t='0'}
+
diff --git a/fortran/config/irix5.x b/fortran/config/irix5.x
new file mode 100644
index 0000000..bd757e1
--- /dev/null
+++ b/fortran/config/irix5.x
@@ -0,0 +1,50 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details
+
+# The default compiler is `cc' and there is no ranlib.
+if test "X-" =  "X-$CC"; then
+    CC=cc
+    CC_BASENAME=cc
+fi
+RANLIB=:
+
+case "X-$CC_BASENAME" in
+    X-gcc)
+	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
+	DEBUG_CFLAGS="-g -fverbose-asm"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O3"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    *)
+        # Do *not* use -ansi because it prevents hdf5 from being able
+        # to read modification dates from the file. On some systems it
+        # can also result in compile errors in system header files
+        # since hdf5 includes a couple non-ANSI header files.
+        #CFLAGS="$CFLAGS -ansi"
+
+	# Always turn off these compiler warnings:
+        CFLAGS="$CFLAGS -woff 799"
+
+	# Extra debugging flags
+	DEBUG_CFLAGS=-g
+	DEBUG_CPPFLAGS=
+
+	# Extra production flags
+	# Note: higher optimizations relax alignment requirements needed.
+	PROD_CFLAGS="-O -s"
+	PROD_CPPFLAGS=
+
+	# Extra profiling flags
+	PROFILE_CFLAGS=-pg
+	PROFILE_CPPFLAGS=
+	;;
+esac
diff --git a/fortran/config/irix6.x b/fortran/config/irix6.x
new file mode 100644
index 0000000..62505a3
--- /dev/null
+++ b/fortran/config/irix6.x
@@ -0,0 +1,123 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# Use SGI supplied C compiler by default.  There is no ranlib
+if test "X-" =  "X-$CC"; then
+    CC='cc'
+    CC_BASENAME=cc
+fi
+RANLIB=:
+
+# Compiler flags
+case "X-$CC_BASENAME" in
+    X-gcc)
+	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
+	DEBUG_CFLAGS="-g -fverbose-asm"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O3"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    *)
+        # Check for old versions of the compiler that don't work right.
+        case "`$CC -version 2>&1 |head -1`" in
+	    "Mongoose Compilers: Version 7.00")
+		echo "  +---------------------------------------------------+"
+		echo "  | You have an old version of cc (Mongoose Compilers |"
+		echo "  | version 7.00).  Please upgrade to MIPSpro version |"
+		echo "  | 7.2.1.2m (patches are available from the SGI web  |"
+		echo "  | site).  The 7.00 version may generate incorrect   |"
+		echo "  | code, especially when optimizations are enabled.  |"
+		echo "  +---------------------------------------------------+"
+		sleep 5
+		;;
+	esac
+
+	# Do *not* use -ansi because it prevents hdf5 from being able
+	# to read modification dates from the file. On some systems it
+	# can also result in compile errors in system header files
+	# since hdf5 includes a couple non-ANSI header files.
+	#CFLAGS="$CFLAGS -ansi"
+
+	# Always turn off these compiler warnings for the -64 compiler:
+	#    1174:  function declared but not used
+	#    1196:  __vfork() (this is an SGI config problem)
+	#    1209:  constant expressions
+	#    1429:  the `long long' type is not standard
+	#    1685:  turn off warnings about turning off invalid warnings
+	#    3201:  remark - parameter not referenced
+	CFLAGS="$CFLAGS -woff 1174,1429,1209,1196,1685,3201"
+
+	# Always turn off these compiler warnings for the old compiler:
+	#    799:   the `long long' type is not standard
+	#    803:   turn off warnings about turning off invalid warnings
+	#    835:   __vfork() (this is an SGI config problem)
+	CFLAGS="$CFLAGS -woff 799,803,835"
+
+	# Always turn off these loader warnings:
+	# (notice the peculiar syntax)
+	#      47:  branch instructions that degrade performance on R4000
+	#      84:  a library is not used
+	#      85:  duplicate definition preemption (from -lnsl)
+	#     134:  duplicate weak definition preemption (from -lnsl)
+	CFLAGS="$CFLAGS -Wl,-woff,47,-woff,84,-woff,85,-woff,134"
+
+	# Extra debugging flags
+	DEBUG_CFLAGS="-g -fullwarn"
+	DEBUG_CPPFLAGS=
+
+	# Extra production flags
+	PROD_CFLAGS="-64 -mips4 -O -s"
+	PROD_CPPFLAGS=
+
+	# Extra profiling flags
+	PROFILE_CFLAGS=-pg
+	PROFILE_CPPFLAGS=
+	;;
+esac
+
+# Use SGI supplied C compiler by default.  There is no ranlib
+if test "X-" =  "X-$F9X"; then
+    F9X="f90"
+    FFLAGS="-64 -mips4 -O -s"
+    DEBUG_FFLAGS="-64 -mips4 -O -s"
+    PROD_FFLAGS="-64 -mips4 -O -s"
+    PROFILE_FFLAGS="-64 -mips4 -O -s"
+fi
+
+# The default Fortran 90 compiler
+
+#
+# HDF5 integers
+#
+# 	R_LARGE is the number of digits for the bigest integer supported.
+#	R_INTEGER is the number of digits in INTEGER
+#
+# (for the IRIX architechture)
+#
+R_LARGE=18
+R_INTEGER=9
+HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HID_T='SELECTED_INT_KIND(R_INTEGER)'
+SIZE_T='SELECTED_INT_KIND(R_LARGE)'
+OBJECT_NAMELEN_DEFAULT_F=-1
+
+if test "X-" = "X-$F9X"; then
+    F9X=f90
+fi
+
+if test "X-" = "X-$f9x_flags_set"; then
+    FFLAGS="-64 -mips4 -O -s"
+    DEBUG_FFLAGS="-64 -mips4 -O -s"
+    PROD_FFLAGS="-64 -mips4 -O -s"
+    PROFILE_FFLAGS="-64 -mips4 -O -s"
+    f9x_flags_set=yes
+fi
diff --git a/fortran/config/linux-gnu b/fortran/config/linux-gnu
new file mode 100644
index 0000000..d139966
--- /dev/null
+++ b/fortran/config/linux-gnu
@@ -0,0 +1,4 @@
+#							-*- shell-script -*-
+# This is the same as linux-gnulibc1
+
+. $srcdir/config/linux-gnulibc1
diff --git a/fortran/config/linux-gnulibc1 b/fortran/config/linux-gnulibc1
new file mode 100644
index 0000000..6765b0b
--- /dev/null
+++ b/fortran/config/linux-gnulibc1
@@ -0,0 +1,49 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# The default compiler is `gcc'.
+if test "X-" =  "X-$CC"; then
+    CC=gcc
+    CC_BASENAME=gcc
+fi
+
+# Omit frame pointer for optimized code?
+NOFP=${NOFP:=-fomit-frame-pointer}
+
+# Figure out compiler flags
+. $srcdir/config/gnu-flags
+
+# The default Fortran 90 compiler
+
+#
+# HDF5 integers
+#
+# 	R_LARGE is the number of digits for the bigest integer supported.
+#	R_INTEGER is the number of digits in INTEGER
+#
+# (for the Linux architechture)
+#
+R_LARGE=18
+R_INTEGER=9
+HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HID_T='SELECTED_INT_KIND(R_INTEGER)'
+SIZE_T='SELECTED_INT_KIND(R_INTEGER)'
+OBJECT_NAMELEN_DEFAULT_F=-1
+
+if test "X-" = "X-$F9X"; then
+    F9X=pgf90
+fi
+
+if test "X-" = "X-$f9x_flags_set"; then
+    FFLAGS=
+    DEBUG_FFLAGS=
+    PROD_FFLAGS=
+    PROFILE_FFLAGS=
+    f9x_flags_set=yes
+fi
diff --git a/fortran/config/linux-gnulibc2 b/fortran/config/linux-gnulibc2
new file mode 100644
index 0000000..4551fb6
--- /dev/null
+++ b/fortran/config/linux-gnulibc2
@@ -0,0 +1,10 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# Same as with gnulibc1 for now
+. $srcdir/config/linux-gnulibc1
diff --git a/fortran/config/powerpc-ibm-aix4.2.1.0 b/fortran/config/powerpc-ibm-aix4.2.1.0
new file mode 100644
index 0000000..cab0d8b
--- /dev/null
+++ b/fortran/config/powerpc-ibm-aix4.2.1.0
@@ -0,0 +1,22 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# Cross compiling defaults
+hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
+ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
+ac_cv_header_stdc=${ac_cv_header_stdc='yes'}
+ac_cv_sizeof_short=${ac_cv_sizeof_short=2}
+ac_cv_sizeof_int=${ac_cv_sizeof_int=4}
+ac_cv_sizeof_long=${ac_cv_sizeof_long=4}
+ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long=8}
+ac_cv_sizeof_float=${ac_cv_sizeof_float=4}
+ac_cv_sizeof_double=${ac_cv_sizeof_double=8}
+ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double=8}
+ac_cv_sizeof_int=${ac_cv_sizeof_int=4}
+ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t=4}
+ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t=8}
diff --git a/fortran/config/powerpc-ibm-aix4.3.2.0 b/fortran/config/powerpc-ibm-aix4.3.2.0
new file mode 100644
index 0000000..db5eb05
--- /dev/null
+++ b/fortran/config/powerpc-ibm-aix4.3.2.0
@@ -0,0 +1,63 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+
+
+#----------------------------------------------------------------------------
+# Compiler flags. The CPPFLAGS values should not include package debug
+# flags like `-DH5G_DEBUG' since these are added with the
+# `--enable-debug' switch of configure.
+
+# What must *always* be present for things to compile correctly?
+#CFLAGS="$CFLAGS -ansi"
+#CPPFLAGS="$CPPFLAGS -I."
+
+# What compiler flags should be used for code development?
+DEBUG_CFLAGS=
+DEBUG_CPPFLAGS=
+
+# What compiler flags should be used for building a production
+# library?
+PROD_CFLAGS=
+PROD_CPPFLAGS=
+
+# What compiler flags enable code profiling?
+PROFILE_CFLAGS=
+PROFILE_CPPFLAGS=
+
+
+#----------------------------------------------------------------------------
+# Values for overriding configuration tests when cross compiling.
+# This includes compiling on some machines where the serial front end
+# compiles for a parallel back end.
+
+# Set this to `yes' or `no' depending on whether the target is big
+# endian or little endian.
+hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
+ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
+ac_cv_header_stdc=${ac_cv_header_stdc='yes'}
+ac_cv_sizeof_short=${ac_cv_sizeof_short=2}
+ac_cv_sizeof_int=${ac_cv_sizeof_int=4}
+ac_cv_sizeof_long=${ac_cv_sizeof_long=4}
+ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long=8}
+ac_cv_sizeof_float=${ac_cv_sizeof_float=4}
+ac_cv_sizeof_double=${ac_cv_sizeof_double=8}
+ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double=8}
+ac_cv_sizeof_int=${ac_cv_sizeof_int=4}
+ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t=4}
+ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t=8}
+ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t=1}
+ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t=2}
+ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t=4}
+ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t=8}
+ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t=1}
+ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t=2}
+ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t=4}
+ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t=8}
+ac_cv_sizeof___int64=${ac_cv_sizeof___int64=8}
+ac_cv_sizeof_char=${ac_cv_sizeof_char=1}
+ac_cv_header_sys_ioctl_h=${ac_cv_header_sys_ioctl_h=yes}
+ac_cv_path_install=${ac_cv_path_install='cp -r'}
+RUNPARALLEL="MP_PROCS=2 poe"
diff --git a/fortran/config/powerpc-ibm-aix4.x b/fortran/config/powerpc-ibm-aix4.x
new file mode 100644
index 0000000..24176a5
--- /dev/null
+++ b/fortran/config/powerpc-ibm-aix4.x
@@ -0,0 +1,21 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# Cross compiling defaults
+ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
+ac_cv_header_stdc=${ac_cv_header_stdc='yes'}
+ac_cv_sizeof_short=${ac_cv_sizeof_short=2}
+ac_cv_sizeof_int=${ac_cv_sizeof_int=4}
+ac_cv_sizeof_long=${ac_cv_sizeof_long=4}
+ac_cv_sizeof_long_long=${ac_cv_sizeof_long_long=8}
+ac_cv_sizeof_float=${ac_cv_sizeof_float=4}
+ac_cv_sizeof_double=${ac_cv_sizeof_double=8}
+ac_cv_sizeof_long_double=${ac_cv_sizeof_long_double=8}
+ac_cv_sizeof_int=${ac_cv_sizeof_int=4}
+ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t=4}
+ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t=8}
diff --git a/fortran/config/rs6000-ibm-aix4.x b/fortran/config/rs6000-ibm-aix4.x
new file mode 100644
index 0000000..2f7cc86
--- /dev/null
+++ b/fortran/config/rs6000-ibm-aix4.x
@@ -0,0 +1,10 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# Cross compiling defaults
+ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
diff --git a/fortran/config/solaris2.x b/fortran/config/solaris2.x
new file mode 100644
index 0000000..9758cfc
--- /dev/null
+++ b/fortran/config/solaris2.x
@@ -0,0 +1,62 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details
+
+# The default compiler is `sunpro cc'
+if test "X-" =  "X-$CC"; then
+    CC=cc
+    CC_BASENAME=cc
+fi
+
+# Try gcc compiler flags
+. $srcdir/config/gnu-flags
+
+# Try solaris native compiler flags
+if test "X-" = "X-$cc_flags_set"; then
+    CFLAGS="-erroff=%none"
+    DEBUG_CFLAGS=-g
+    DEBUG_CPPFLAGS=
+    PROD_CFLAGS="-O -s"
+    PROD_CPPFLAGS=
+    PROFILE_CFLAGS=-xpg
+    PROFILE_CPPFLAGS=
+    cc_flags_set=yes
+    # Turn off optimization flag for SUNpro compiler versions 4.x which
+    # have an optimization bug.  Version 5.0 works.
+    ($CC -V 2>&1) | grep -s 'cc: .* C 4\.' >/dev/null 2>&1 \
+	&& PROD_CFLAGS="`echo $PROD_CFLAGS | sed -e 's/-O//'`"
+fi
+
+# The default Fortran 90 compiler
+
+#
+# HDF5 integers
+#
+# 	R_LARGE is the number of digits for the bigest integer supported.
+#	R_INTEGER is the number of digits in INTEGER
+#
+# (for the Sparc Solaris architechture)
+#
+R_LARGE=9
+R_INTEGER=9
+HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HID_T='SELECTED_INT_KIND(R_INTEGER)'
+SIZE_T='SELECTED_INT_KIND(R_LARGE)'
+OBJECT_NAMELEN_DEFAULT_F=-1
+
+if test "X-" = "X-$F9X"; then
+    F9X=f90
+fi
+
+if test "X-" = "X-$f9x_flags_set"; then
+    FFLAGS=
+    DEBUG_FFLAGS=
+    PROD_FFLAGS=
+    PROFILE_FFLAGS=
+    f9x_flags_set=yes
+fi
diff --git a/fortran/config/unicos b/fortran/config/unicos
new file mode 100644
index 0000000..71201af
--- /dev/null
+++ b/fortran/config/unicos
@@ -0,0 +1,166 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+
+
+#----------------------------------------------------------------------------
+# Compiler flags. The CPPFLAGS values should not include package debug
+# flags like `-DH5G_DEBUG' since these are added with the
+# `--enable-debug' switch of configure.
+#----------------------------------------------------------------------------
+
+
+# Choosing a C Compiler
+# ---------------------
+#
+# The user should be able to specify the compiler by setting the CC
+# environment variable to the name of the compiler and any switches it 
+# requires for proper operation.  If CC is unset then this script may
+# set it.  If CC is unset by time this script completes then configure 
+# will try `gcc' and `cc' in that order (perhaps some others too).
+#
+# Note: Code later in this file may depend on the value of $CC_BASENAME
+#       in order to distinguish between different compilers when
+#       deciding which compiler command-line switches to use.  This
+#       variable is set based on the incoming value of $CC and is only
+#       used within this file.
+
+if test "X-" =  "X-$CC"; then
+    CC=cc
+    CC_BASENAME=cc
+fi
+# no need to use RANLIB
+RANLIB=:
+
+
+# C Compiler and Preprocessor Flags
+# ---------------------------------
+#
+# Flags that end with `_CFLAGS' are always passed to the compiler.
+# Flags that end with `_CPPFLAGS' are passed to the compiler when
+# compiling but not when linking.
+#
+# DEBUG_CFLAGS		Flags to pass to the compiler to create a
+# DEBUG_CPPFLAGS	library suitable for use with debugging
+#			tools. Usually this list will exclude
+#			optimization switches (like `-O') and include
+#			switches that turn on symbolic debugging
+#			support (like `-g').
+#
+# PROD_CFLAGS		Flags to pass to the compiler to create a
+# PROD_CPPFLAGS		production version of the library.  These
+#			usualy exclude symbolic debugging switches
+#			(like `-g') and include optimization switches
+#			(like `-O').
+#
+# PROFILE_CFLAGS	Flags to pass to the compiler to create a
+# PROFILE_CPPFLAGS	library suitable for performance testing (like 
+# 			`-pg').  This may or may not include debugging 
+# 			or production flags.
+#			
+# CFLAGS		Flags can be added to this variable which
+#			might already be partially initialized.  These 
+#			flags will always be passed to the compiler
+#			and should include switches to turn on full
+#			warnings.  HDF5 attempts to be ANSI and Posix
+#			compliant and employ good programming
+#			practices resulting in few if any
+#			warnings.
+#
+#			Warning flags do not have to be added to CFLAGS
+#			variable if the compiler is the GNU gcc
+#			compiler or a descendent of gcc such as EGCS or PGCC.
+#
+#			The CFLAGS should contains *something* or else 
+#			configure will probably add `-g'.  For most
+#			systems this isn't a problem but some systems
+#			will disable optimizations in favor of the
+#			`-g'.
+#			
+#
+# These flags should be set according to the compiler being used.
+# There are two ways to check the compiler.  You can try using `-v' or 
+# `--version' to see if the compiler will print a version string.  You 
+# can use the value of $CC_BASENAME which is the base name of the
+# first word in $CC (note that the value of CC may have changed
+# above).
+
+case $CC_BASENAME in
+    gcc)
+	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
+	DEBUG_CFLAGS="-g -fverbose-asm"
+	DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
+	PROD_CFLAGS="-O3 -fomit-frame-pointer"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    cc)
+	CFLAGS="$CFLAGS"
+	DEBUG_CFLAGS="-g -h zero -h scalar0"
+	DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
+	PROD_CFLAGS="-O2 -h scalar0"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    *)
+	CFLAGS="$CFLAGS -ansi"
+	DEBUG_CFLAGS="-g"
+	DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
+	PROD_CFLAGS="-O"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+esac
+
+# Overriding Configure Tests
+# --------------------------
+#
+# Values for overriding configuration tests when cross compiling.
+# This includes compiling on some machines where the serial front end
+# compiles for a parallel back end.
+
+# Set this to `yes' or `no' depending on whether the target is big
+# endian or little endian.
+ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
+
+# Set this to the width required by printf() to print type `long
+# long'.  For instance, if the format would be `%lld' then set it to
+# `ll' or if the format would be `%qd' set it to `q'.
+#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
+
+# The default Fortran 90 compiler
+
+#
+# HDF5 integers
+#
+# 	R_LARGE is the number of digits for the bigest integer supported.
+#	R_INTEGER is the number of digits in INTEGER
+#
+# (for the UNICOS architechture)
+#
+R_LARGE=18
+R_INTEGER=18
+HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HID_T='SELECTED_INT_KIND(R_INTEGER)'
+SIZE_T='SELECTED_INT_KIND(R_LARGE)'
+OBJECT_NAMELEN_DEFAULT_F=-1
+
+if test "X-" = "X-$F9X"; then
+    F9X=f90
+fi
+
+if test "X-" = "X-$f9x_flags_set"; then
+    FFLAGS="-dp"
+    DEBUG_FFLAGS="-dp"
+    PROD_FFLAGS="-dp"
+    PROFILE_FFLAGS="-dp"
+    f9x_flags_set=yes
+fi
diff --git a/fortran/config/unicosmk b/fortran/config/unicosmk
new file mode 100644
index 0000000..3c46387
--- /dev/null
+++ b/fortran/config/unicosmk
@@ -0,0 +1,168 @@
+#							-*- shell-script -*-
+#
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+
+
+#----------------------------------------------------------------------------
+# Compiler flags. The CPPFLAGS values should not include package debug
+# flags like `-DH5G_DEBUG' since these are added with the
+# `--enable-debug' switch of configure.
+#----------------------------------------------------------------------------
+
+
+# Choosing a C Compiler
+# ---------------------
+#
+# The user should be able to specify the compiler by setting the CC
+# environment variable to the name of the compiler and any switches it 
+# requires for proper operation.  If CC is unset then this script may
+# set it.  If CC is unset by time this script completes then configure 
+# will try `gcc' and `cc' in that order (perhaps some others too).
+#
+# Note: Code later in this file may depend on the value of $CC_BASENAME
+#       in order to distinguish between different compilers when
+#       deciding which compiler command-line switches to use.  This
+#       variable is set based on the incoming value of $CC and is only
+#       used within this file.
+
+if test "X-" =  "X-$CC"; then
+    CC=cc
+    CC_BASENAME=cc
+fi
+# no need to use RANLIB
+RANLIB=:
+
+
+# C Compiler and Preprocessor Flags
+# ---------------------------------
+#
+# Flags that end with `_CFLAGS' are always passed to the compiler.
+# Flags that end with `_CPPFLAGS' are passed to the compiler when
+# compiling but not when linking.
+#
+# DEBUG_CFLAGS		Flags to pass to the compiler to create a
+# DEBUG_CPPFLAGS	library suitable for use with debugging
+#			tools. Usually this list will exclude
+#			optimization switches (like `-O') and include
+#			switches that turn on symbolic debugging
+#			support (like `-g').
+#
+# PROD_CFLAGS		Flags to pass to the compiler to create a
+# PROD_CPPFLAGS		production version of the library.  These
+#			usualy exclude symbolic debugging switches
+#			(like `-g') and include optimization switches
+#			(like `-O').
+#
+# PROFILE_CFLAGS	Flags to pass to the compiler to create a
+# PROFILE_CPPFLAGS	library suitable for performance testing (like 
+# 			`-pg').  This may or may not include debugging 
+# 			or production flags.
+#			
+# CFLAGS		Flags can be added to this variable which
+#			might already be partially initialized.  These 
+#			flags will always be passed to the compiler
+#			and should include switches to turn on full
+#			warnings.  HDF5 attempts to be ANSI and Posix
+#			compliant and employ good programming
+#			practices resulting in few if any
+#			warnings.
+#
+#			Warning flags do not have to be added to CFLAGS
+#			variable if the compiler is the GNU gcc
+#			compiler or a descendent of gcc such as EGCS or PGCC.
+#
+#			The CFLAGS should contains *something* or else 
+#			configure will probably add `-g'.  For most
+#			systems this isn't a problem but some systems
+#			will disable optimizations in favor of the
+#			`-g'.
+#			
+#
+# These flags should be set according to the compiler being used.
+# There are two ways to check the compiler.  You can try using `-v' or 
+# `--version' to see if the compiler will print a version string.  You 
+# can use the value of $CC_BASENAME which is the base name of the
+# first word in $CC (note that the value of CC may have changed
+# above).
+
+case $CC_BASENAME in
+    gcc)
+	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
+	DEBUG_CFLAGS="-g -fverbose-asm"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O3 -fomit-frame-pointer"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    cc)
+	CFLAGS="$CFLAGS"
+	DEBUG_CFLAGS="-g -h zero"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O2 -h scalar0"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+
+    *)
+	CFLAGS="$CFLAGS -ansi"
+	DEBUG_CFLAGS="-g"
+	DEBUG_CPPFLAGS=
+	PROD_CFLAGS="-O"
+	PROD_CPPFLAGS=
+	PROFILE_CFLAGS="-pg"
+	PROFILE_CPPFLAGS=
+	;;
+esac
+
+
+
+# Overriding Configure Tests
+# --------------------------
+#
+# Values for overriding configuration tests when cross compiling.
+# This includes compiling on some machines where the serial front end
+# compiles for a parallel back end.
+
+# Set this to `yes' or `no' depending on whether the target is big
+# endian or little endian.
+#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
+
+# Set this to the width required by printf() to print type `long
+# long'.  For instance, if the format would be `%lld' then set it to
+# `ll' or if the format would be `%qd' set it to `q'.
+#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
+
+# The default Fortran 90 compiler
+
+#
+# HDF5 integers
+#
+# 	R_LARGE is the number of digits for the bigest integer supported.
+#	R_INTEGER is the number of digits in INTEGER
+#
+# (for the UNICOS architechture)
+#
+R_LARGE=18
+R_INTEGER=18
+HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
+HID_T='SELECTED_INT_KIND(R_INTEGER)'
+SIZE_T='SELECTED_INT_KIND(R_LARGE)'
+OBJECT_NAMELEN_DEFAULT_F=-1
+
+if test "X-" = "X-$F9X"; then
+    F9X=f90
+fi
+
+if test "X-" = "X-$f9x_flags_set"; then
+    FFLAGS="-dp"
+    DEBUG_FFLAGS="-dp"
+    PROD_FFLAGS="-dp"
+    PROFILE_FFLAGS="-dp"
+    f9x_flags_set=yes
+fi