[svn-r18198] Description:

    Trim trailing whitespace from source code files, with following command:

find . \( -name "*.[ch]" -or -name "*.cpp" -or -name "*.f90" \) -print |xargs -n 1 sed -i "" 's/[[:blank:]]*$//'

Tested on:
    None - eyeballed only

1 files changed, 251 insertions, 251 deletions

diff --git a/fortran/src/H5Fff.f90 b/fortran/src/H5Fff.f90
index e499fac..a1ebe58 100644
--- a/fortran/src/H5Fff.f90
+++ b/fortran/src/H5Fff.f90
@@ -1,4 +1,4 @@
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 !   Copyright by The HDF Group.                                               *
 !   Copyright by the Board of Trustees of the University of Illinois.         *
 !   All rights reserved.                                                      *
@@ -11,58 +11,58 @@
 !   is linked from the top-level documents page.  It can also be found at     *
 !   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
 !   access to either file, you may request a copy from help@hdfgroup.org.     *
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 !
 !
 ! This file contains Fortran90 interfaces for H5F functions.
-! 
+!
       MODULE H5F
       USE H5GLOBAL
- 
+
         CONTAINS
-          
+
 !----------------------------------------------------------------------
-! Name:		h5fcreate_f 
+! Name:		h5fcreate_f
 !
-! Purpose:	Creates HDF5 files. 
+! Purpose:	Creates HDF5 files.
 !
-! Inputs:  
+! Inputs:
 !		name		- name of the file to create
-!		access_flags	- File access flags. Allowable values are: 
-!				  H5F_ACC_TRUNC_F 
-!				  H5F_ACC_EXCL_F 
-! Outputs:  
+!		access_flags	- File access flags. Allowable values are:
+!				  H5F_ACC_TRUNC_F
+!				  H5F_ACC_EXCL_F
+! Outputs:
 !		file_id		- file identifier
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !		creation_prp	- file creation property list identifier
 !		access_prp	- file access property list identifier
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
           SUBROUTINE h5fcreate_f(name, access_flags, file_id, hdferr, &
                                  creation_prp, access_prp)
-            IMPLICIT NONE 
+            IMPLICIT NONE
             CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the file
             INTEGER, INTENT(IN) :: access_flags    ! File access flags
-            INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier 
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code 
-            INTEGER(HID_T), OPTIONAL, INTENT(IN) :: creation_prp 
+            INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier
+            INTEGER, INTENT(OUT) :: hdferr         ! Error code
+            INTEGER(HID_T), OPTIONAL, INTENT(IN) :: creation_prp
                                                    ! File creation propertly
-                                                   ! list identifier 
+                                                   ! list identifier
             INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp
                                                    ! File access property list
                                                    ! identifier
-            INTEGER(HID_T) :: creation_prp_default 
+            INTEGER(HID_T) :: creation_prp_default
             INTEGER(HID_T) :: access_prp_default
             INTEGER :: namelen ! Length of the name character string
 
@@ -76,7 +76,7 @@
               !DEC$IF DEFINED(HDF5F90_WINDOWS)
               !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FCREATE_C':: h5fcreate_c
               !DEC$ENDIF
-              !DEC$ATTRIBUTES reference :: name 
+              !DEC$ATTRIBUTES reference :: name
               CHARACTER(LEN=*), INTENT(IN) :: name
               INTEGER, INTENT(IN) :: access_flags
               INTEGER(HID_T), INTENT(OUT) :: file_id
@@ -85,67 +85,67 @@
               INTEGER :: namelen
               END FUNCTION h5fcreate_c
             END INTERFACE
-  
+
             creation_prp_default = H5P_DEFAULT_F
             access_prp_default = H5P_DEFAULT_F
 
-            IF (PRESENT(creation_prp)) creation_prp_default = creation_prp 
-            IF (PRESENT(access_prp))   access_prp_default   = access_prp 
+            IF (PRESENT(creation_prp)) creation_prp_default = creation_prp
+            IF (PRESENT(access_prp))   access_prp_default   = access_prp
             namelen = LEN_TRIM(name)
 
             hdferr = h5fcreate_c(name, namelen, access_flags, &
-                     creation_prp_default, access_prp_default, file_id) 
+                     creation_prp_default, access_prp_default, file_id)
 
           END SUBROUTINE h5fcreate_f
-          
+
 !----------------------------------------------------------------------
-! Name:		h5fflush_f 
+! Name:		h5fflush_f
 !
-! Purpose:	Flushes all buffers associated with a file to disk	
+! Purpose:	Flushes all buffers associated with a file to disk
 !
-! Inputs:  
-!		object_id	- identifier of object used to identify 
-!				  the file. 
-!		scope		- specifies the scope of the flushing action. 
+! Inputs:
+!		object_id	- identifier of object used to identify
+!				  the file.
+!		scope		- specifies the scope of the flushing action.
 !				  Possible values are:
 !				  H5F_SCOPE_GLOBAL_F
 !				  H5F_SCOPE_LOCAL_F
-! Outputs:  
-!		hdferr:		- error code		
+! Outputs:
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !		creation_prp	- file creation property list identifier
 !		access_prp	- file access property list identifier
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
           SUBROUTINE h5fflush_f(object_id, scope, hdferr)
             IMPLICIT NONE
             INTEGER(HID_T), INTENT(IN) :: object_id !identifier for any object
-                                                    !associate with a file, 
+                                                    !associate with a file,
                                                     !including the file itself,
                                                     !a dataset, a group, an
                                                     !attribute, or a named
                                                     !data type
 
             INTEGER, INTENT(IN) :: scope            !scope of the flushing
-                                                    !action, possible values 
+                                                    !action, possible values
                                                     !are: H5F_SCOPE_GLOBAL_F
                                                     ! which flushes the entire
-                                                    !virtual file, 
+                                                    !virtual file,
                                                     !and H5F_SCOPE_LOCAL_F
-                                                    !which flushes only the 
+                                                    !which flushes only the
                                                     !specified file.
 
-            INTEGER, INTENT(OUT) :: hdferr          ! Error code 
+            INTEGER, INTENT(OUT) :: hdferr          ! Error code
 
 !            INTEGER, EXTERNAL :: h5fflush_c
 !  MS FORTRAN needs explicit interface for C functions called here.
@@ -161,52 +161,52 @@
               END FUNCTION h5fflush_c
             END INTERFACE
 
-           hdferr = h5fflush_c(object_id, scope) 
+           hdferr = h5fflush_c(object_id, scope)
 
           END SUBROUTINE h5fflush_f
 
 !----------------------------------------------------------------------
-! Name:		h5fmount_f 
+! Name:		h5fmount_f
 !
-! Purpose:	Mounts a file. 	
+! Purpose:	Mounts a file.
 !
-! Inputs:  
-!		loc_id		- the identifier for of file or group in 
+! Inputs:
+!		loc_id		- the identifier for of file or group in
 !				  which name is defined
-!		name		- the name of the group onto which the file 
-!				  specified by child_id is to be mounted. 
-!		child_id	- the identifier of the file to be mounted. 
-! Outputs:  
-!		hdferr:		- error code		
+!		name		- the name of the group onto which the file
+!				  specified by child_id is to be mounted.
+!		child_id	- the identifier of the file to be mounted.
+! Outputs:
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !		access_prp	- the identifier of the property list to be used
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
- 
+
           SUBROUTINE h5fmount_f(loc_id, name, child_id, hdferr, access_prp)
             IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: loc_id   ! Identifier for file or group 
-                                                   ! in which dsetname is defined 
+            INTEGER(HID_T), INTENT(IN) :: loc_id   ! Identifier for file or group
+                                                   ! in which dsetname is defined
             CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of the group
             INTEGER(HID_T), INTENT(IN) :: child_id ! File identifier for the
-                                                   ! file to be mounted 
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code 
+                                                   ! file to be mounted
+            INTEGER, INTENT(OUT) :: hdferr         ! Error code
             INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp
                                                    ! File access property list
                                                    ! identifier
-            INTEGER(HID_T) :: access_prp_default 
+            INTEGER(HID_T) :: access_prp_default
             INTEGER :: namelen ! Length of the name character string
-  
+
 !            INTEGER, EXTERNAL :: h5fmount_c
 !  Interface is needed for MS FORTRAN
 !
@@ -217,58 +217,58 @@
               !DEC$IF DEFINED(HDF5F90_WINDOWS)
               !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FMOUNT_C':: h5fmount_c
               !DEC$ENDIF
-              !DEC$ATTRIBUTES reference :: name 
-              INTEGER(HID_T), INTENT(IN) :: loc_id 
-              CHARACTER(LEN=*), INTENT(IN) :: name 
-              INTEGER(HID_T), INTENT(IN) :: child_id 
+              !DEC$ATTRIBUTES reference :: name
+              INTEGER(HID_T), INTENT(IN) :: loc_id
+              CHARACTER(LEN=*), INTENT(IN) :: name
+              INTEGER(HID_T), INTENT(IN) :: child_id
               INTEGER(HID_T), INTENT(IN) :: access_prp_default
-              INTEGER :: namelen 
+              INTEGER :: namelen
               END FUNCTION h5fmount_c
             END INTERFACE
 
             access_prp_default = H5P_DEFAULT_F
-            if (present(access_prp))   access_prp_default   = access_prp 
+            if (present(access_prp))   access_prp_default   = access_prp
             namelen = LEN(name)
-            hdferr = h5fmount_c(loc_id, name, namelen, child_id, access_prp_default) 
-                      
+            hdferr = h5fmount_c(loc_id, name, namelen, child_id, access_prp_default)
+
           END SUBROUTINE h5fmount_f
 
 
 !----------------------------------------------------------------------
-! Name:		h5funmount_f 
+! Name:		h5funmount_f
 !
-! Purpose:	Unmounts a file. 	
+! Purpose:	Unmounts a file.
 !
-! Inputs:  
-!		loc_id		- the identifier for of file or group in 
+! Inputs:
+!		loc_id		- the identifier for of file or group in
 !				  which name is defined
 !		name		- the name of the mount point
-! Outputs:  
-!		hdferr:		- error code		
+! Outputs:
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !				NONE
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
 
           SUBROUTINE h5funmount_f(loc_id, name, hdferr)
             IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: loc_id   ! Identifier for file or group 
-                                                   ! at which the specified file 
+            INTEGER(HID_T), INTENT(IN) :: loc_id   ! Identifier for file or group
+                                                   ! at which the specified file
                                                    ! is to be unmounted
             CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the mount point
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code 
+            INTEGER, INTENT(OUT) :: hdferr         ! Error code
             INTEGER :: namelen ! Length of the name character string
-  
+
 !            INTEGER, EXTERNAL :: h5fumount_c
 !  Interface is needed for MS FORTRAN
 !
@@ -278,56 +278,56 @@
               !DEC$IF DEFINED(HDF5F90_WINDOWS)
               !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FUNMOUNT_C':: h5funmount_c
               !DEC$ENDIF
-              !DEC$ATTRIBUTES reference :: name 
-              INTEGER(HID_T), INTENT(IN) :: loc_id 
-              CHARACTER(LEN=*), INTENT(IN) :: name 
-              INTEGER :: namelen 
+              !DEC$ATTRIBUTES reference :: name
+              INTEGER(HID_T), INTENT(IN) :: loc_id
+              CHARACTER(LEN=*), INTENT(IN) :: name
+              INTEGER :: namelen
               END FUNCTION h5funmount_c
             END INTERFACE
-  
+
             namelen = LEN(name)
-            hdferr = h5funmount_c(loc_id, name, namelen) 
-    
+            hdferr = h5funmount_c(loc_id, name, namelen)
+
           END SUBROUTINE h5funmount_f
-          
+
 !----------------------------------------------------------------------
-! Name:		h5fopen_f 
+! Name:		h5fopen_f
 !
-! Purpose:	Opens HDF5 file. 
+! Purpose:	Opens HDF5 file.
 !
-! Inputs:  
+! Inputs:
 !		name		- name of the file to acecss
-!		access_flags	- File access flags. Allowable values are: 
-!				  H5F_ACC_RDWR_F 
-!				  H5F_ACC_RDONLY_F 
-! Outputs:  
+!		access_flags	- File access flags. Allowable values are:
+!				  H5F_ACC_RDWR_F
+!				  H5F_ACC_RDONLY_F
+! Outputs:
 !		file_id		- file identifier
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !		access_prp	- file access property list identifier
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
           SUBROUTINE h5fopen_f(name, access_flags, file_id, hdferr, &
                                access_prp)
             IMPLICIT NONE
             CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the file
             INTEGER, INTENT(IN) :: access_flags    ! File access flags
-            INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier 
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code 
+            INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier
+            INTEGER, INTENT(OUT) :: hdferr         ! Error code
             INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp
                                                    ! File access property list
                                                    ! identifier
-            INTEGER(HID_T) :: access_prp_default 
+            INTEGER(HID_T) :: access_prp_default
             INTEGER :: namelen ! Length of the name character string
 
 !            INTEGER, EXTERNAL :: h5fopen_c
@@ -348,46 +348,46 @@
               INTEGER(HID_T), INTENT(OUT) :: file_id
               END FUNCTION h5fopen_c
             END INTERFACE
-  
+
             access_prp_default = H5P_DEFAULT_F
-            if (present(access_prp))   access_prp_default   = access_prp 
+            if (present(access_prp))   access_prp_default   = access_prp
             namelen = LEN(name)
             hdferr = h5fopen_c(name, namelen, access_flags, &
-                               access_prp_default, file_id) 
+                               access_prp_default, file_id)
 
           END SUBROUTINE h5fopen_f
-          
+
 !----------------------------------------------------------------------
-! Name:		h5freopen_f 
+! Name:		h5freopen_f
 !
-! Purpose:	Reopens HDF5 file. 
+! Purpose:	Reopens HDF5 file.
 !
-! Inputs:  
-!		file_id		- identifier of a file for which an 
+! Inputs:
+!		file_id		- identifier of a file for which an
 !				  additional identifier is required
-! Outputs:  
+! Outputs:
 !		ret_file_id	- new file identifier
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !				NONE
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
 
           SUBROUTINE h5freopen_f(file_id, ret_file_id, hdferr)
             IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: file_id      ! File identifier 
-            INTEGER(HID_T), INTENT(OUT) :: ret_file_id ! New File identifier 
-            INTEGER, INTENT(OUT) :: hdferr             ! Error code 
+            INTEGER(HID_T), INTENT(IN) :: file_id      ! File identifier
+            INTEGER(HID_T), INTENT(OUT) :: ret_file_id ! New File identifier
+            INTEGER, INTENT(OUT) :: hdferr             ! Error code
 
 !            INTEGER, EXTERNAL :: h5freopen_c
 !  MS FORTRAN needs explicit interface for C functions called here.
@@ -403,42 +403,42 @@
               END FUNCTION h5freopen_c
             END INTERFACE
 
-            hdferr = h5freopen_c(file_id, ret_file_id) 
-          
+            hdferr = h5freopen_c(file_id, ret_file_id)
+
           END SUBROUTINE h5freopen_f
-          
+
 !----------------------------------------------------------------------
 ! Name:		h5fget_create_plist_f
 !
-! Purpose:	Returns a file creation property list identifier.	
+! Purpose:	Returns a file creation property list identifier.
 !
-! Inputs:  
-!		file_id		- identifier of a file to get 
-!				  get creation property list of 
-! Outputs:  
+! Inputs:
+!		file_id		- identifier of a file to get
+!				  get creation property list of
+! Outputs:
 !		prop_id 	- creation property list identifier
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !				NONE
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
-          
+
           SUBROUTINE h5fget_create_plist_f(file_id, prop_id, hdferr)
             IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: file_id    ! File identifier 
+            INTEGER(HID_T), INTENT(IN) :: file_id    ! File identifier
             INTEGER(HID_T), INTENT(OUT) :: prop_id   ! File creation property
-                                                     ! list identifier 
-            INTEGER, INTENT(OUT) :: hdferr           ! Error code 
+                                                     ! list identifier
+            INTEGER, INTENT(OUT) :: hdferr           ! Error code
 
 !            INTEGER, EXTERNAL :: h5fget_create_plist_c
 !  MS FORTRAN needs explicit interface for C functions called here.
@@ -453,43 +453,43 @@
               INTEGER(HID_T), INTENT(OUT) :: prop_id
               END FUNCTION h5fget_create_plist_c
             END INTERFACE
-  
-            hdferr = h5fget_create_plist_c(file_id, prop_id) 
+
+            hdferr = h5fget_create_plist_c(file_id, prop_id)
 
           END SUBROUTINE h5fget_create_plist_f
-          
+
 !----------------------------------------------------------------------
 ! Name:		h5fget_access_plist_f
 !
-! Purpose:	Returns a file access property list identifier.	
+! Purpose:	Returns a file access property list identifier.
 !
-! Inputs:  
-!		file_id		- identifier of a file to get 
-!				  get creation property list of 
-! Outputs:  
+! Inputs:
+!		file_id		- identifier of a file to get
+!				  get creation property list of
+! Outputs:
 !		access_id 	- access property list identifier
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !				NONE
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
 
           SUBROUTINE h5fget_access_plist_f(file_id, access_id, hdferr)
             IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: file_id      ! File identifier 
+            INTEGER(HID_T), INTENT(IN) :: file_id      ! File identifier
             INTEGER(HID_T), INTENT(OUT) :: access_id   ! File access property
-                                                       ! list identifier 
-            INTEGER, INTENT(OUT) :: hdferr             ! Error code 
+                                                       ! list identifier
+            INTEGER, INTENT(OUT) :: hdferr             ! Error code
 
 !            INTEGER, EXTERNAL :: h5fget_access_plist_c
 !  MS FORTRAN needs explicit interface for C functions called here.
@@ -504,46 +504,46 @@
               INTEGER(HID_T), INTENT(OUT) :: access_id
               END FUNCTION h5fget_access_plist_c
             END INTERFACE
-  
-  
-            hdferr = h5fget_access_plist_c(file_id, access_id) 
+
+
+            hdferr = h5fget_access_plist_c(file_id, access_id)
 
           END SUBROUTINE h5fget_access_plist_f
-          
+
 !----------------------------------------------------------------------
 ! Name:		h5fis_hdf5_f
 !
-! Purpose:	Determines whether a file is in the HDF5 format. 
+! Purpose:	Determines whether a file is in the HDF5 format.
 !
-! Inputs:  
+! Inputs:
 !		name		- name of the file to check
-! Outputs:  
+! Outputs:
 !		status		- indicates if file is and HDF5 file
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !				NONE
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
- 
+
           SUBROUTINE h5fis_hdf5_f(name, status, hdferr)
             IMPLICIT NONE
             CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the file
             LOGICAL, INTENT(OUT) :: status         ! Indicates if file
                                                    ! is an HDF5 file
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code 
+            INTEGER, INTENT(OUT) :: hdferr         ! Error code
             INTEGER :: namelen ! Length of the name character string
             INTEGER :: flag    ! "TRUE/FALSE" flag from C routine
-                               ! to define status value. 
+                               ! to define status value.
 
 !            INTEGER, EXTERNAL :: h5fis_hdf5_c
 !  MS FORTRAN needs explicit interface for C functions called here.
@@ -560,38 +560,38 @@
               INTEGER :: flag
               END FUNCTION h5fis_hdf5_c
             END INTERFACE
-  
+
             namelen = LEN(name)
-            hdferr = h5fis_hdf5_c(name, namelen, flag) 
+            hdferr = h5fis_hdf5_c(name, namelen, flag)
             status = .TRUE.
             if (flag .EQ. 0) status = .FALSE.
 
           END SUBROUTINE h5fis_hdf5_f
-          
+
 !----------------------------------------------------------------------
 ! Name:		h5fclose_f
 !
 ! Purpose:	Closes HDF5 file.
 !
-! Inputs:  
+! Inputs:
 !		file_id		- file identifier
-! Outputs:  
-!		hdferr:		- error code		
+! Outputs:
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !				NONE
 !
 ! Programmer:	Elena Pourmal
-!		August 12, 1999	
+!		August 12, 1999
 !
-! Modifications: 	Explicit Fortran interfaces were added for 
+! Modifications: 	Explicit Fortran interfaces were added for
 !			called C functions (it is needed for Windows
-!			port).  February 28, 2001 
+!			port).  February 28, 2001
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
-          
+
           SUBROUTINE h5fclose_f(file_id, hdferr)
             IMPLICIT NONE
             INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier
@@ -619,31 +619,31 @@
 !
 ! Purpose:	Gets number of the objects open within a file
 !
-! Inputs:  
+! Inputs:
 !		file_id		- file identifier
 !               obj_type        - type of the object; possible values are:
-!                                 H5F_OBJ_FILE_F 
-!                                 H5F_OBJ_DATASET_F 
-!                                 H5F_OBJ_GROUP_F 
-!                                 H5F_OBJ_DATATYPE_F 
-!                                 H5F_OBJ_ALL_F 
-! Outputs:  
+!                                 H5F_OBJ_FILE_F
+!                                 H5F_OBJ_DATASET_F
+!                                 H5F_OBJ_GROUP_F
+!                                 H5F_OBJ_DATATYPE_F
+!                                 H5F_OBJ_ALL_F
+! Outputs:
 !               obj_count       - number of open objects
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !				NONE
 !
 ! Programmer:	Elena Pourmal
 !		September 30, 2002
 !
-! Modifications: 	
+! Modifications:
 !               Changed the type of obj_count to INTEGER(SIZE_T)
 !                               September 25, 2008 EIP
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
-          
+
           SUBROUTINE h5fget_obj_count_f(file_id, obj_type, obj_count, hdferr)
             IMPLICIT NONE
             INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier
@@ -674,34 +674,34 @@
 !
 ! Purpose:	Get list of open objects identifiers within a file
 !
-! Inputs:  
+! Inputs:
 !		file_id		- file identifier
 !               obj_type        - type of the object; possible values are:
-!                                 H5F_OBJ_FILE_F 
-!                                 H5F_OBJ_DATASET_F 
-!                                 H5F_OBJ_GROUP_F 
-!                                 H5F_OBJ_DATATYPE_F 
-!                                 H5F_OBJ_ALL_F 
-! Outputs:  
+!                                 H5F_OBJ_FILE_F
+!                                 H5F_OBJ_DATASET_F
+!                                 H5F_OBJ_GROUP_F
+!                                 H5F_OBJ_DATATYPE_F
+!                                 H5F_OBJ_ALL_F
+! Outputs:
 !               obj_ids         - array of open object identifiers
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !				NONE
 !
 ! Programmer:	Elena Pourmal
 !		September 30, 2002
 !
-! Modifications: 	
+! Modifications:
 !               Added optional parameter num_objs for number of open objects
-!               of the specified type and changed type of max_obj to 
+!               of the specified type and changed type of max_obj to
 !               INTEGER(SIZE_T)
 !                               September 25, 2008 EIP
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
-          
+
           SUBROUTINE h5fget_obj_ids_f(file_id, obj_type, max_objs, obj_ids, hdferr, num_objs)
             IMPLICIT NONE
             INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier
@@ -710,8 +710,8 @@
             INTEGER(HID_T), DIMENSION(*), INTENT(INOUT) :: obj_ids
                                                ! Array of open objects iidentifiers
             INTEGER, INTENT(OUT) :: hdferr     ! Error code
-            INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: num_objs 
-            INTEGER(SIZE_T) :: c_num_objs 
+            INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: num_objs
+            INTEGER(SIZE_T) :: c_num_objs
                               ! Number of open objects of the specified type
 
             INTERFACE
@@ -721,10 +721,10 @@
        !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FGET_OBJ_IDS_C':: h5fget_obj_ids_c
               !DEC$ENDIF
               INTEGER(HID_T), INTENT(IN) :: file_id
-              INTEGER, INTENT(IN)  :: obj_type      
+              INTEGER, INTENT(IN)  :: obj_type
               INTEGER(SIZE_T), INTENT(IN)  :: max_objs
-              INTEGER(HID_T), DIMENSION(*), INTENT(INOUT) :: obj_ids  
-              INTEGER(SIZE_T), INTENT(OUT) :: c_num_objs 
+              INTEGER(HID_T), DIMENSION(*), INTENT(INOUT) :: obj_ids
+              INTEGER(SIZE_T), INTENT(OUT) :: c_num_objs
               END FUNCTION h5fget_obj_ids_c
             END INTERFACE
 
@@ -738,28 +738,28 @@
 !
 ! Purpose:	Get amount of free space within a file
 !
-! Inputs:  
+! Inputs:
 !		file_id		- file identifier
-! Outputs:  
+! Outputs:
 !               free_space      - amount of free space in file
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !				NONE
 !
 ! Programmer:	Quincey Koziol
 !		October 7, 2003
 !
-! Modifications: 	
+! Modifications:
 !
-! Comment:		
+! Comment:
 !----------------------------------------------------------------------
-          
+
           SUBROUTINE h5fget_freespace_f(file_id, free_space, hdferr)
             IMPLICIT NONE
             INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier
-            INTEGER(HSSIZE_T), INTENT(OUT) :: free_space 
+            INTEGER(HSSIZE_T), INTENT(OUT) :: free_space
                                              !amount of free space in file
             INTEGER, INTENT(OUT) :: hdferr        ! Error code
 
@@ -770,7 +770,7 @@
        !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FGET_FREESPACE_C':: h5fget_freespace_c
               !DEC$ENDIF
               INTEGER(HID_T), INTENT(IN) :: file_id
-              INTEGER(HSSIZE_T), INTENT(OUT) :: free_space 
+              INTEGER(HSSIZE_T), INTENT(OUT) :: free_space
               END FUNCTION h5fget_freespace_c
             END INTERFACE
 
@@ -779,19 +779,19 @@
           END SUBROUTINE h5fget_freespace_f
 
 !----------------------------------------------------------------------
-! Name:		h5fget_name_f 
+! Name:		h5fget_name_f
 !
 ! Purpose: 	Gets the name of the file from the object identifier
 !
-! Inputs:  
+! Inputs:
 !		obj_id		- object identifier
 ! Inputs/Outputs:
 !		buf		- buffer to read name in
-! Outputs:  
+! Outputs:
 !		size		- actual size of the name
-!		hdferr:		- error code		
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !
 ! Programmer:	Elena Pourmal
@@ -802,8 +802,8 @@
 
           SUBROUTINE h5fget_name_f(obj_id, buf, size, hdferr)
             IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: obj_id   ! Object identifier 
-            CHARACTER(LEN=*), INTENT(INOUT) :: buf   
+            INTEGER(HID_T), INTENT(IN) :: obj_id   ! Object identifier
+            CHARACTER(LEN=*), INTENT(INOUT) :: buf
                                                    ! Buffer to hold file name
             INTEGER(SIZE_T), INTENT(OUT) :: size   ! Size of the file name
             INTEGER, INTENT(OUT) :: hdferr         ! Error code: 0 on success,
@@ -830,17 +830,17 @@
           END SUBROUTINE h5fget_name_f
 
 !----------------------------------------------------------------------
-! Name:		h5fget_filesize_f 
+! Name:		h5fget_filesize_f
 !
 ! Purpose: 	Retrieves the file size of the HDF5 file.
 !
-! Inputs:  
+! Inputs:
 !		file_id		- file identifier
-! Outputs:  
-!		size		- file size 
-!		hdferr:		- error code		
+! Outputs:
+!		size		- file size
+!		hdferr:		- error code
 !				 	Success:  0
-!				 	Failure: -1   
+!				 	Failure: -1
 ! Optional parameters:
 !
 ! Programmer:	Elena Pourmal
@@ -852,7 +852,7 @@
           SUBROUTINE h5fget_filesize_f(file_id, size, hdferr)
             IMPLICIT NONE
             INTEGER(HID_T), INTENT(IN) :: file_id  ! file identifier
-            INTEGER(HSIZE_T), INTENT(OUT) :: size  ! Size of the file 
+            INTEGER(HSIZE_T), INTENT(OUT) :: size  ! Size of the file
             INTEGER, INTENT(OUT) :: hdferr         ! Error code: 0 on success,
                                                    ! -1 if fail
 !            INTEGER, EXTERNAL :: h5fget_filesize_c