[svn-r27625] Added preprocessor commands for PGI compiler.

tested: h5committest

1 files changed, 0 insertions, 1993 deletions

diff --git a/fortran/test/tH5Sselect.f90 b/fortran/test/tH5Sselect.f90
deleted file mode 100644
index aeb80e9..0000000
--- a/fortran/test/tH5Sselect.f90
+++ /dev/null
@@ -1,1993 +0,0 @@
-!****h* root/fortran/test/tH5Sselect.f90
-!
-! NAME
-!  tH5Sselect.f90
-!
-! FUNCTION
-!  Basic testing of Fortran H5S, Selection-related Dataspace Interface, APIs.
-!
-! COPYRIGHT
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!   Copyright by The HDF Group.                                               *
-!   Copyright by the Board of Trustees of the University of Illinois.         *
-!   All rights reserved.                                                      *
-!                                                                             *
-!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
-!   terms governing use, modification, and redistribution, is contained in    *
-!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
-!   of the source code distribution tree; Copyright.html can be found at the  *
-!   root level of an installed copy of the electronic HDF5 document set and   *
-!   is linked from the top-level documents page.  It can also be found at     *
-!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
-!   access to either file, you may request a copy from help@hdfgroup.org.     *
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!
-! NOTES
-!  Tests the following functionalities:
-!    h5sget_select_npoints_f, h5sselect_elements_f, h5sselect_all_f,
-!    h5sselect_none_f, h5sselect_valid_f, h5sselect_hyperslab_f,
-!    h5sget_select_bounds_f, h5sget_select_elem_pointlist_f,
-!    h5sget_select_elem_npoints_f, h5sget_select_hyper_blocklist_f,
-!    h5sget_select_hyper_nblocks_f, h5sget_select_npoints_f   
-!
-! CONTAINS SUBROUTINES
-!  test_select_hyperslab, test_select_element, test_basic_select,
-!  test_select_point, test_select_combine, test_select_bounds
-!  
-!
-!*****
-MODULE TH5SSELECT
-
-  USE HDF5 ! This module contains all necessary modules
-  USE TH5_MISC
-  USE TH5_MISC_GEN
-
-CONTAINS
-
-  SUBROUTINE test_select_hyperslab(cleanup, total_error)
-
-    IMPLICIT NONE
-    LOGICAL, INTENT(IN) :: cleanup
-    INTEGER, INTENT(INOUT) :: total_error
-
-    CHARACTER(LEN=7), PARAMETER :: filename = "tselect"
-    CHARACTER(LEN=80) :: fix_filename
-
-    !
-    !dataset name is "IntArray"
-    !
-    CHARACTER(LEN=8), PARAMETER :: dsetname = "IntArray"
-
-    INTEGER(HID_T) :: file_id       ! File identifier
-    INTEGER(HID_T) :: dset_id       ! Dataset identifier
-    INTEGER(HID_T) :: dataspace     ! Dataspace identifier
-    INTEGER(HID_T) :: memspace      ! memspace identifier
-
-    !
-    !Memory space dimensions
-    !
-    INTEGER(HSIZE_T), DIMENSION(3) :: dimsm = (/7,7,3/)
-
-
-    !
-    !Dataset dimensions
-    !
-    INTEGER(HSIZE_T), DIMENSION(2) :: dimsf = (/5,6/)
-
-    !
-    !Size of the hyperslab in the file
-    !
-    INTEGER(HSIZE_T), DIMENSION(2) :: count = (/3,4/)
-
-    !
-    !hyperslab offset in the file
-    !
-    INTEGER(HSIZE_T), DIMENSION(2) :: offset = (/1,2/)
-
-    !
-    !Size of the hyperslab in memory
-    !
-    INTEGER(HSIZE_T), DIMENSION(3) :: count_out = (/3,4,1/)
-
-    !
-    !hyperslab offset in memory
-    !
-    INTEGER(HSIZE_T), DIMENSION(3) :: offset_out = (/3,0,0/)
-
-    !
-    !data to write
-    !
-    INTEGER, DIMENSION(5,6) :: data
-
-    !
-    !output buffer
-    !
-    INTEGER, DIMENSION(7,7,3) :: data_out
-
-
-    !
-    !dataset space rank
-    !
-    INTEGER :: dsetrank = 2
-
-    !
-    !memspace rank
-    !
-    INTEGER :: memrank = 3
-
-
-
-
-    !
-    !general purpose integer
-    !
-    INTEGER :: i, j
-
-    !
-    !flag to check operation success
-    !
-    INTEGER :: error
-    INTEGER(HSIZE_T), DIMENSION(3) :: data_dims
-
-
-    !
-    !This writes data to the HDF5 file.
-    !
-
-    !
-    !data initialization
-    !
-    do i = 1, 5
-       do j = 1, 6
-          data(i,j) = (i-1) + (j-1);
-       end do
-    end do
-    !
-    ! 0,  1,  2,  3,  4,  5
-    ! 1,  2,  3,  4,  5,  6
-    ! 2,  3,  4,  5,  6,  7
-    ! 3,  4,  5,  6,  7,  8
-    ! 4,  5,  6,  7,  8,  9
-    !
-
-    !
-    !Initialize FORTRAN predifined datatypes
-    !
-!    CALL h5init_types_f(error)
-!    CALL check("h5init_types_f", error, total_error)
-
-    !
-    !Create a new file using default properties.
-    !
-          CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error)
-          if (error .ne. 0) then
-              write(*,*) "Cannot modify filename"
-              stop
-          endif
-    CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error)
-    CALL check("h5fcreate_f", error, total_error)
-
-    !
-    !Create the data space for the  dataset.
-    !
-    CALL h5screate_simple_f(dsetrank, dimsf, dataspace, error)
-    CALL check("h5screate_simple_f", error, total_error)
-
-    !
-    ! Create the dataset with default properties
-    !
-    CALL h5dcreate_f(file_id, dsetname, H5T_STD_I32BE, dataspace, &
-         dset_id, error)
-    CALL check("h5dcreate_f", error, total_error)
-
-    !
-    ! Write the dataset
-    !
-    data_dims(1) = 5
-    data_dims(2) = 6
-    CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data, data_dims, error)
-    CALL check("h5dwrite_f", error, total_error)
-
-    !
-    !Close the dataspace for the dataset.
-    !
-    CALL h5sclose_f(dataspace, error)
-    CALL check("h5sclose_f", error, total_error)
-
-    !
-    !Close the dataset.
-    !
-    CALL h5dclose_f(dset_id, error)
-    CALL check("h5dclose_f", error, total_error)
-
-    !
-    !Close the file.
-    !
-    CALL h5fclose_f(file_id, error)
-    CALL check("h5fclose_f", error, total_error)
-
-    !
-    !This reads the hyperslab from the sds.h5 file just
-    !created, into a 2-dimensional plane of the 3-dimensional array.
-    !
-
-    !
-    !initialize data_out array
-    !
-    !     do i = 1, 7
-    !          do j = 1, 7
-    !              do k = 1,3
-    !                  data_out(i,j,k) = 0;
-    !              end do
-    !          end do
-    !     end do
-
-    !
-    !Open the file.
-    !
-    CALL h5fopen_f (fix_filename, H5F_ACC_RDONLY_F, file_id, error)
-    CALL check("h5fopen_f", error, total_error)
-
-    !
-    !Open the  dataset.
-    !
-    CALL h5dopen_f(file_id, dsetname, dset_id, error)
-    CALL check("h5dopen_f", error, total_error)
-
-    !
-    !Get dataset's dataspace handle.
-    !
-    CALL h5dget_space_f(dset_id, dataspace, error)
-    CALL check("h5dget_space_f", error, total_error)
-
-    !
-    !Select hyperslab in the dataset.
-    !
-    CALL h5sselect_hyperslab_f(dataspace, H5S_SELECT_SET_F, &
-         offset, count, error)
-    CALL check("h5sselect_hyperslab_f", error, total_error)
-    !
-    !create memory dataspace.
-    !
-    CALL h5screate_simple_f(memrank, dimsm, memspace, error)
-    CALL check("h5screate_simple_f", error, total_error)
-
-    !
-    !Select hyperslab in memory.
-    !
-    CALL h5sselect_hyperslab_f(memspace, H5S_SELECT_SET_F, &
-         offset_out, count_out, error)
-    CALL check("h5sselect_hyperslab_f", error, total_error)
-
-    !
-    !Read data from hyperslab in the file into the hyperslab in
-    !memory and display.
-    !
-    data_dims(1) = 7
-    data_dims(2) = 7
-    data_dims(3) = 3
-    CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, data_out, data_dims, error, &
-         memspace, dataspace)
-    CALL check("h5dread_f", error, total_error)
-
-    !
-    !Display data_out array
-    !
-    !do i = 1, 7
-    !   print *, (data_out(i,j,1), j = 1,7)
-    !end do
-
-    ! 0 0 0 0 0 0 0
-    ! 0 0 0 0 0 0 0
-    ! 0 0 0 0 0 0 0
-    ! 3 4 5 6 0 0 0
-    ! 4 5 6 7 0 0 0
-    ! 5 6 7 8 0 0 0
-    ! 0 0 0 0 0 0 0
-    !
-
-    !
-    !Close the dataspace for the dataset.
-    !
-    CALL h5sclose_f(dataspace, error)
-    CALL check("h5sclose_f", error, total_error)
-
-    !
-    !Close the memoryspace.
-    !
-    CALL h5sclose_f(memspace, error)
-    CALL check("h5sclose_f", error, total_error)
-
-    !
-    !Close the dataset.
-    !
-    CALL h5dclose_f(dset_id, error)
-    CALL check("h5dclose_f", error, total_error)
-
-    !
-    !Close the file.
-    !
-    CALL h5fclose_f(file_id, error)
-    CALL check("h5fclose_f", error, total_error)
-
-
-          if(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error)
-              CALL check("h5_cleanup_f", error, total_error)
-    RETURN
-
-  END SUBROUTINE test_select_hyperslab
-
-  !
-  !Subroutine to test element selection
-  !
-
-  SUBROUTINE test_select_element(cleanup, total_error)
-
-    USE HDF5 ! This module contains all necessary modules
-    USE TH5_MISC
-
-    IMPLICIT NONE
-    LOGICAL, INTENT(IN)  :: cleanup
-    INTEGER, INTENT(INOUT) :: total_error
-
-    !
-    !the dataset1 is stored in file "copy1.h5"
-    !
-    CHARACTER(LEN=13), PARAMETER :: filename1 = "tselect_copy1"
-    CHARACTER(LEN=80) :: fix_filename1
-
-    !
-    !the dataset2 is stored in file "copy2.h5"
-    !
-    CHARACTER(LEN=13), PARAMETER :: filename2 = "tselect_copy2"
-    CHARACTER(LEN=80) :: fix_filename2
-    !
-    !dataset1 name is "Copy1"
-    !
-    CHARACTER(LEN=8), PARAMETER :: dsetname1 = "Copy1"
-
-    !
-    !dataset2 name is "Copy2"
-    !
-    CHARACTER(LEN=8), PARAMETER :: dsetname2 = "Copy2"
-
-    !
-    !dataset rank
-    !
-    INTEGER, PARAMETER :: RANK = 2
-
-    !
-    !number of points selected
-    !
-    INTEGER(SIZE_T), PARAMETER :: NUMP = 2
-
-    INTEGER(HID_T) :: file1_id       ! File1 identifier
-    INTEGER(HID_T) :: file2_id       ! File2 identifier
-    INTEGER(HID_T) :: dset1_id       ! Dataset1 identifier
-    INTEGER(HID_T) :: dset2_id       ! Dataset2 identifier
-    INTEGER(HID_T) :: dataspace1     ! Dataspace identifier
-    INTEGER(HID_T) :: dataspace2     ! Dataspace identifier
-    INTEGER(HID_T) :: memspace       ! memspace identifier
-
-    !
-    !Memory space dimensions
-    !
-    INTEGER(HSIZE_T), DIMENSION(1) :: dimsm = (/2/)
-
-    !
-    !Dataset dimensions
-    !
-    INTEGER(HSIZE_T), DIMENSION(2) :: dimsf = (/3,4/)
-
-    !
-    !Points positions in the file
-    !
-    INTEGER(HSIZE_T), DIMENSION(RANK,NUMP) :: coord
-
-    !
-    !data buffers
-    !
-    INTEGER, DIMENSION(3,4) :: buf1, buf2, bufnew
-
-    !
-    !value to write
-    !
-    INTEGER, DIMENSION(2) :: val = (/53, 59/)
-
-    !
-    !memory rank
-    !
-    INTEGER :: memrank = 1
-
-    !
-    !general purpose integer
-    !
-    INTEGER :: i, j
-
-    !
-    !flag to check operation success
-    !
-    INTEGER :: error
-    INTEGER(HSIZE_T), DIMENSION(3) :: data_dims
-
-
-    !
-    !Create two files containing identical datasets. Write 0's to one
-    !and 1's to the other.
-    !
-
-    !
-    !data initialization
-    !
-    do i = 1, 3
-       do j = 1, 4
-          buf1(i,j) = 0;
-       end do
-    end do
-
-    do i = 1, 3
-       do j = 1, 4
-          buf2(i,j) = 1;
-       end do
-    end do
-
-    !
-    !Initialize FORTRAN predifined datatypes
-    !
-!    CALL h5init_types_f(error)
-!    CALL check("h5init_types_f", error, total_error)
-
-    !
-    !Create file1, file2  using default properties.
-    !
-          CALL h5_fixname_f(filename1, fix_filename1, H5P_DEFAULT_F, error)
-          if (error .ne. 0) then
-              write(*,*) "Cannot modify filename"
-              stop
-          endif
-    CALL h5fcreate_f(fix_filename1, H5F_ACC_TRUNC_F, file1_id, error)
-    CALL check("h5fcreate_f", error, total_error)
-
-          CALL h5_fixname_f(filename2, fix_filename2, H5P_DEFAULT_F, error)
-          if (error .ne. 0) then
-              write(*,*) "Cannot modify filename"
-              stop
-          endif
-    CALL h5fcreate_f(fix_filename2, H5F_ACC_TRUNC_F, file2_id, error)
-    CALL check("h5fcreate_f", error, total_error)
-
-    !
-    !Create the data space for the  datasets.
-    !
-    CALL h5screate_simple_f(RANK, dimsf, dataspace1, error)
-    CALL check("h5screate_simple_f", error, total_error)
-
-    CALL h5screate_simple_f(RANK, dimsf, dataspace2, error)
-    CALL check("h5screate_simple_f", error, total_error)
-
-    !
-    ! Create the datasets with default properties
-    !
-    CALL h5dcreate_f(file1_id, dsetname1, H5T_NATIVE_INTEGER, dataspace1, &
-         dset1_id, error)
-    CALL check("h5dcreate_f", error, total_error)
-
-    CALL h5dcreate_f(file2_id, dsetname2, H5T_NATIVE_INTEGER, dataspace2, &
-         dset2_id, error)
-    CALL check("h5dcreate_f", error, total_error)
-
-    !
-    ! Write the datasets
-    !
-    data_dims(1) = 3
-    data_dims(2) = 4
-    CALL h5dwrite_f(dset1_id, H5T_NATIVE_INTEGER, buf1, data_dims, error)
-    CALL check("h5dwrite_f", error, total_error)
-
-    CALL h5dwrite_f(dset2_id, H5T_NATIVE_INTEGER, buf2, data_dims, error)
-    CALL check("h5dwrite_f", error, total_error)
-
-    !
-    !Close the dataspace for the datasets.
-    !
-    CALL h5sclose_f(dataspace1, error)
-    CALL check("h5sclose_f", error, total_error)
-
-    CALL h5sclose_f(dataspace2, error)
-    CALL check("h5sclose_f", error, total_error)
-
-    !
-    !Close the datasets.
-    !
-    CALL h5dclose_f(dset1_id, error)
-    CALL check("h5dclose_f", error, total_error)
-
-    CALL h5dclose_f(dset2_id, error)
-    CALL check("h5dclose_f", error, total_error)
-
-    !
-    !Close the files.
-    !
-    CALL h5fclose_f(file1_id, error)
-    CALL check("h5fclose_f", error, total_error)
-
-    CALL h5fclose_f(file2_id, error)
-    CALL check("h5fclose_f", error, total_error)
-
-    !
-    !Open the two files.  Select two points in one file, write values to
-    !those point locations, then do H5Scopy and write the values to the
-    !other file.  Close files.
-    !
-
-    !
-    !Open the files.
-    !
-    CALL h5fopen_f (fix_filename1, H5F_ACC_RDWR_F, file1_id, error)
-    CALL check("h5fopen_f", error, total_error)
-
-    CALL h5fopen_f (fix_filename2, H5F_ACC_RDWR_F, file2_id, error)
-    CALL check("h5fopen_f", error, total_error)
-
-    !
-    !Open the  datasets.
-    !
-    CALL h5dopen_f(file1_id, dsetname1, dset1_id, error)
-    CALL check("h5dopen_f", error, total_error)
-
-    CALL h5dopen_f(file2_id, dsetname2, dset2_id, error)
-    CALL check("h5dopen_f", error, total_error)
-
-    !
-    !Get dataset1's dataspace handle.
-    !
-    CALL h5dget_space_f(dset1_id, dataspace1, error)
-    CALL check("h5dget_space_f", error, total_error)
-
-    !
-    !create memory dataspace.
-    !
-    CALL h5screate_simple_f(memrank, dimsm, memspace, error)
-    CALL check("h5screate_simple_f", error, total_error)
-
-    !
-    !Set the selected point positions.Because Fortran array index starts
-    ! from 1, so add one to the actual select points in C
-    !
-    coord(1,1) = 1
-    coord(2,1) = 2
-    coord(1,2) = 1
-    coord(2,2) = 4
-
-    !
-    !Select the elements in file space
-    !
-    CALL h5sselect_elements_f(dataspace1, H5S_SELECT_SET_F, RANK, NUMP,&
-         coord, error)
-    CALL check("h5sselect_elements_f", error, total_error)
-
-    !
-    !Write value into the selected points in dataset1
-    !
-    data_dims(1) = 2
-    CALL H5dwrite_f(dset1_id, H5T_NATIVE_INTEGER, val, data_dims, error, &
-         mem_space_id=memspace, file_space_id=dataspace1)
-    CALL check("h5dwrite_f", error, total_error)
-
-    !
-    !Copy the daspace1 into dataspace2
-    !
-    CALL h5scopy_f(dataspace1, dataspace2, error)
-    CALL check("h5scopy_f", error, total_error)
-
-    !
-    !Write value into the selected points in dataset2
-    !
-    CALL H5dwrite_f(dset2_id, H5T_NATIVE_INTEGER, val, data_dims, error, &
-         mem_space_id=memspace, file_space_id=dataspace2)
-    CALL check("h5dwrite_f", error, total_error)
-
-    !
-    !Close the dataspace for the datasets.
-    !
-    CALL h5sclose_f(dataspace1, error)
-    CALL check("h5sclose_f", error, total_error)
-
-    CALL h5sclose_f(dataspace2, error)
-    CALL check("h5sclose_f", error, total_error)
-
-    !
-    !Close the memoryspace.
-    !
-    CALL h5sclose_f(memspace, error)
-    CALL check("h5sclose_f", error, total_error)
-
-    !
-    !Close the datasets.
-    !
-    CALL h5dclose_f(dset1_id, error)
-    CALL check("h5dclose_f", error, total_error)
-
-    CALL h5dclose_f(dset2_id, error)
-    CALL check("h5dclose_f", error, total_error)
-
-    !
-    !Close the files.
-    !
-    CALL h5fclose_f(file1_id, error)
-    CALL check("h5fclose_f", error, total_error)
-
-    CALL h5fclose_f(file2_id, error)
-    CALL check("h5fclose_f", error, total_error)
-
-    !
-    !Open both files and print the contents of the datasets.
-    !
-
-    !
-    !Open the files.
-    !
-    CALL h5fopen_f (fix_filename1, H5F_ACC_RDWR_F, file1_id, error)
-    CALL check("h5fopen_f", error, total_error)
-
-    CALL h5fopen_f (fix_filename2, H5F_ACC_RDWR_F, file2_id, error)
-    CALL check("h5fopen_f", error, total_error)
-
-    !
-    !Open the  datasets.
-    !
-    CALL h5dopen_f(file1_id, dsetname1, dset1_id, error)
-    CALL check("h5dopen_f", error, total_error)
-
-    CALL h5dopen_f(file2_id, dsetname2, dset2_id, error)
-    CALL check("h5dopen_f", error, total_error)
-
-    !
-    !Read dataset1.
-    !
-    data_dims(1) = 3
-    data_dims(2) = 4
-    CALL h5dread_f(dset1_id, H5T_NATIVE_INTEGER, bufnew, data_dims, error)
-    CALL check("h5dread_f", error, total_error)
-
-    !
-    !Display the data read from dataset "Copy1"
-    !
-    !write(*,*) "The data in dataset Copy1 is: "
-    !do i = 1, 3
-    !   print *, (bufnew(i,j), j = 1,4)
-    !end do
-
-    !
-    !Read dataset2.
-    !
-    CALL h5dread_f(dset2_id, H5T_NATIVE_INTEGER, bufnew, data_dims, error)
-    CALL check("h5dread_f", error, total_error)
-
-    !
-    !Display the data read from dataset "Copy2"
-    !
-    !write(*,*) "The data in dataset Copy2 is: "
-    !do i = 1, 3
-    !   print *, (bufnew(i,j), j = 1,4)
-    !end do
-
-    !
-    !Close the datasets.
-    !
-    CALL h5dclose_f(dset1_id, error)
-    CALL check("h5dclose_f", error, total_error)
-
-    CALL h5dclose_f(dset2_id, error)
-    CALL check("h5dclose_f", error, total_error)
-
-    !
-    !Close the files.
-    !
-    CALL h5fclose_f(file1_id, error)
-    CALL check("h5fclose_f", error, total_error)
-
-    CALL h5fclose_f(file2_id, error)
-    CALL check("h5fclose_f", error, total_error)
-
-
-          if(cleanup) CALL h5_cleanup_f(filename1, H5P_DEFAULT_F, error)
-              CALL check("h5_cleanup_f", error, total_error)
-          if(cleanup) CALL h5_cleanup_f(filename2, H5P_DEFAULT_F, error)
-              CALL check("h5_cleanup_f", error, total_error)
-     RETURN
-  END SUBROUTINE  test_select_element
-
-
-  SUBROUTINE test_basic_select(cleanup, total_error)
-
-    IMPLICIT NONE
-    LOGICAL, INTENT(IN)  :: cleanup
-    INTEGER, INTENT(INOUT) :: total_error
-
-     !
-     !the dataset is stored in file "testselect.h5"
-     !
-     CHARACTER(LEN=10), PARAMETER :: filename = "testselect"
-     CHARACTER(LEN=80) :: fix_filename
-
-     !
-     !dataspace rank
-     !
-     INTEGER, PARAMETER :: RANK = 2
-
-     !
-     !select NUMP_POINTS points from the file
-     !
-     INTEGER(SIZE_T), PARAMETER :: NUMPS = 10
-
-     !
-     !dataset name is "testselect"
-     !
-     CHARACTER(LEN=10), PARAMETER :: dsetname = "testselect"
-
-     INTEGER(HID_T) :: file_id       ! File identifier
-     INTEGER(HID_T) :: dset_id       ! Dataset identifier
-     INTEGER(HID_T) :: dataspace     ! Dataspace identifier
-
-     !
-     !Dataset dimensions
-     !
-     INTEGER(HSIZE_T), DIMENSION(2) :: dimsf = (/5,6/)
-
-     !
-     !Size of the hyperslab in the file
-     !
-     INTEGER(HSIZE_T), DIMENSION(2) :: count = (/2,2/)
-
-     !
-     !hyperslab offset in the file
-     !
-     INTEGER(HSIZE_T), DIMENSION(2) :: offset = (/0,0/)
-
-     !
-     !start block for getting the selected hyperslab
-     !
-     INTEGER(HSIZE_T) :: startblock = 0
-
-     !
-     !start point for getting the selected elements
-     !
-     INTEGER(HSIZE_T)  :: startpoint = 0
-
-     !
-     !Stride of the hyperslab in the file
-     !
-     INTEGER(HSIZE_T), DIMENSION(2) :: stride = (/3,3/)
-
-     !
-     !BLock size of the hyperslab in the file
-     !
-     INTEGER(HSIZE_T), DIMENSION(2) :: block = (/2,2/)
-
-     !
-     !array to give selected points' coordinations
-     !
-     INTEGER(HSIZE_T), DIMENSION(RANK, NUMPS) :: coord
-
-
-     !
-     !Number of hyperslabs selected in the current dataspace
-     !
-     INTEGER(HSSIZE_T) :: num_blocks
-
-     !
-     !allocatable array for putting a list of hyperslabs
-     !selected in the current file dataspace
-     !
-     INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: blocklist
-
-     !
-     !Number of points selected in the current dataspace
-     !
-     INTEGER(HSSIZE_T) :: num_points
-     INTEGER(HSIZE_T) :: num1_points
-
-     !
-     !allocatable array for putting a list of points
-     !selected in the current file dataspace
-     !
-     INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: pointlist
-
-     !
-     !start and end bounds in the current dataspace selection
-     !
-     INTEGER(HSIZE_T), DIMENSION(RANK) :: startout, endout
-
-     !
-     !data to write
-     !
-     INTEGER, DIMENSION(5,6) :: data
-
-     !
-     !flag to check operation success
-     !
-     INTEGER :: error
-     INTEGER(HSIZE_T), DIMENSION(3) :: data_dims
-
-     !
-     !initialize the coord array to give the selected points' position
-     !
-     coord(1,1) = 1
-     coord(2,1) = 1
-     coord(1,2) = 1
-     coord(2,2) = 3
-     coord(1,3) = 1
-     coord(2,3) = 5
-     coord(1,4) = 3
-     coord(2,4) = 1
-     coord(1,5) = 3
-     coord(2,5) = 3
-     coord(1,6) = 3
-     coord(2,6) = 5
-     coord(1,7) = 4
-     coord(2,7) = 3
-     coord(1,8) = 4
-     coord(2,8) = 1
-     coord(1,9) = 5
-     coord(2,9) = 3
-     coord(1,10) = 5
-     coord(2,10) = 5
-
-     !
-     !Create a new file using default properties.
-     !
-          CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error)
-          if (error .ne. 0) then
-              write(*,*) "Cannot modify filename"
-              stop
-          endif
-     CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error)
-     CALL check("h5fcreate_f", error, total_error)
-
-     !
-     !Create the data space for the  dataset.
-     !
-     CALL h5screate_simple_f(RANK, dimsf, dataspace, error)
-     CALL check("h5screate_simple_f", error, total_error)
-
-     !
-     ! Create the dataset with default properties
-     !
-     CALL h5dcreate_f(file_id, dsetname, H5T_STD_I32BE, dataspace, &
-                      dset_id, error)
-     CALL check("h5dcreate_f", error, total_error)
-
-     !
-     ! Write the dataset
-     !
-     data_dims(1) = 5
-     data_dims(2) = 6
-     CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data, data_dims, error)
-     CALL check("h5dwrite_f", error, total_error)
-
-     !
-     !Close the dataspace for the dataset.
-     !
-     CALL h5sclose_f(dataspace, error)
-     CALL check("h5sclose_f", error, total_error)
-
-     !
-     !Close the dataset.
-     !
-     CALL h5dclose_f(dset_id, error)
-     CALL check("h5dclose_f", error, total_error)
-
-     !
-     !Close the file.
-     !
-     CALL h5fclose_f(file_id, error)
-     CALL check("h5fclose_f", error, total_error)
-
-     !
-     !Open the file.
-     !
-     CALL h5fopen_f (fix_filename, H5F_ACC_RDONLY_F, file_id, error)
-     CALL check("h5fopen_f", error, total_error)
-
-     !
-     !Open the  dataset.
-     !
-     CALL h5dopen_f(file_id, dsetname, dset_id, error)
-     CALL check("h5dopen_f", error, total_error)
-
-     !
-     !Get dataset's dataspace handle.
-     !
-     CALL h5dget_space_f(dset_id, dataspace, error)
-     CALL check("h5dget_space_f", error, total_error)
-
-     !
-     !Select hyperslab in the dataset.
-     !
-     CALL h5sselect_hyperslab_f(dataspace, H5S_SELECT_SET_F, &
-                                offset, count, error, stride, block)
-     CALL check("h5sselect_hyperslab_f", error, total_error)
-
-     !
-     !get the number of hyperslab blocks in the current dataspac selection
-     !
-     CALL h5sget_select_hyper_nblocks_f(dataspace, num_blocks, error)
-     CALL check("h5sget_select_hyper_nblocks_f", error, total_error)
-     IF (num_blocks .NE. 4) write (*,*) "error occured with num_blocks"
-     !write(*,*) num_blocks
-     !result of num_blocks is 4
-
-     !
-     !allocate the blocklist array
-     !
-     ALLOCATE(blocklist(num_blocks*RANK*2), STAT= error)
-     if(error .NE. 0) then
-         STOP
-     endif
-
-     !
-     !get the list of hyperslabs selected in the current dataspac selection
-     !
-     CALL h5sget_select_hyper_blocklist_f(dataspace, startblock, &
-                                          num_blocks, blocklist, error)
-     CALL check("h5sget_select_hyper_blocklist_f", error, total_error)
-!     write(*,*) (blocklist(i), i =1, num_blocks*RANK*2)
-     !result of blocklist selected is:
-     !1,  1,  2,  2,  4,  1,  5,  2,  1,  4,  2,  5,  4,  4,  5,  5
-
-     !
-     !deallocate the blocklist array
-     !
-     DEALLOCATE(blocklist)
-
-     !
-     !get the selection bounds in the current dataspac selection
-     !
-     CALL h5sget_select_bounds_f(dataspace, startout, endout, error)
-     CALL check("h5sget_select_bounds_f", error, total_error)
-     IF ( (startout(1) .ne. 1) .or. (startout(2) .ne. 1) ) THEN
-        write(*,*) "error occured to select_bounds's start position"
-     END IF
-
-     IF ( (endout(1) .ne. 5) .or. (endout(2) .ne. 5) ) THEN
-        write(*,*) "error occured to select_bounds's end position"
-     END IF
-     !write(*,*) (startout(i), i = 1, RANK)
-     !result of startout is 0, 0
-
-     !write(*,*) (endout(i), i = 1, RANK)
-     !result of endout is 5, 5
-
-     !
-     !allocate the pointlist array
-     !
-!     ALLOCATE(pointlist(num_blocks*RANK), STAT= error)
-     ALLOCATE(pointlist(20), STAT= error)
-     if(error .NE. 0) then
-         STOP
-     endif
-
-     !
-     !Select the elements in file space
-     !
-     CALL h5sselect_elements_f(dataspace, H5S_SELECT_SET_F, RANK, NUMPS,&
-                               coord, error)
-     CALL check("h5sselect_elements_f", error, total_error)
-
-     !
-     !Get the number of selected elements
-     !
-     CALL h5sget_select_elem_npoints_f(dataspace, num_points, error)
-     CALL check("h5sget_select_elem_npoints_f", error, total_error)
-     IF (num_points .NE. 10) write(*,*) "error occured with num_points"
-     !write(*,*) num_points
-     ! result of num_points is 10
-
-     !
-     !Get the list of selected elements
-     !
-     num1_points = num_points
-     CALL h5sget_select_elem_pointlist_f(dataspace, startpoint, &
-                                          num1_points, pointlist, error)
-     CALL check("h5sget_select_elem_pointlist_f", error, total_error)
-     !write(*,*) (pointlist(i), i =1, num1_points*RANK)
-     !result of pintlist is:
-     !1,  1,  3,  1,  5,  1,  1,  3,  3,  3,  5,  3,  3,
-     !4,  1,  4,  3,  5,  5,  5
-
-     !
-     !deallocate the pointlist array
-     !
-     DEALLOCATE(pointlist)
-
-     !
-     !Close the dataspace for the dataset.
-     !
-     CALL h5sclose_f(dataspace, error)
-     CALL check("h5sclose_f", error, total_error)
-
-     !
-     !Close the dataset.
-     !
-     CALL h5dclose_f(dset_id, error)
-     CALL check("h5dclose_f", error, total_error)
-
-     !
-     !Close the file.
-     !
-     CALL h5fclose_f(file_id, error)
-     CALL check("h5fclose_f", error, total_error)
-
-
-          if(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error)
-              CALL check("h5_cleanup_f", error, total_error)
-
-     RETURN
-  END SUBROUTINE  test_basic_select
-
-!***************************************************************
-!**
-!**  test_select_point(): Test basic H5S (dataspace) selection code.
-!**      Tests element selections between dataspaces of various sizes
-!**      and dimensionalities.
-!**
-!***************************************************************
-
-SUBROUTINE test_select_point(cleanup, total_error)
-  
-  IMPLICIT NONE
-  LOGICAL, INTENT(IN)  :: cleanup
-  INTEGER, INTENT(INOUT) :: total_error
-  INTEGER(HID_T) :: xfer_plist
-  
-  INTEGER, PARAMETER :: SPACE1_DIM1=3
-  INTEGER, PARAMETER :: SPACE1_DIM2=15
-  INTEGER, PARAMETER :: SPACE1_DIM3=13
-  INTEGER, PARAMETER :: SPACE2_DIM1=30
-  INTEGER, PARAMETER :: SPACE2_DIM2=26
-  INTEGER, PARAMETER :: SPACE3_DIM1=15
-  INTEGER, PARAMETER :: SPACE3_DIM2=26
-  
-  INTEGER, PARAMETER :: SPACE1_RANK=3
-  INTEGER, PARAMETER :: SPACE2_RANK=2
-  INTEGER, PARAMETER :: SPACE3_RANK=2
-  
-  !  Element selection information 
-  INTEGER, PARAMETER :: POINT1_NPOINTS=10
-  INTEGER(hid_t) ::fid1 !  HDF5 File IDs 
-  INTEGER(hid_t) ::dataset !	 Dataset ID 
-  INTEGER(hid_t) ::sid1,sid2 !  Dataspace ID 
-  INTEGER(hsize_t), DIMENSION(1:3) :: dims1 = (/SPACE1_DIM1, SPACE1_DIM2, SPACE1_DIM3/)
-  INTEGER(hsize_t), DIMENSION(1:2) :: dims2 = (/SPACE2_DIM1, SPACE2_DIM2/)
-  INTEGER(hsize_t), DIMENSION(1:2) :: dims3 = (/SPACE3_DIM1, SPACE3_DIM2/)
-  
-  INTEGER(hsize_t), DIMENSION(1:SPACE1_RANK,1:POINT1_NPOINTS) :: coord1 ! Coordinates for point selection 
-  INTEGER(hsize_t), DIMENSION(1:SPACE1_RANK,1:POINT1_NPOINTS) :: temp_coord1 ! Coordinates for point selection 
-  INTEGER(hsize_t), DIMENSION(1:SPACE2_RANK,1:POINT1_NPOINTS) :: coord2 ! Coordinates for point selection 
-  INTEGER(hsize_t), DIMENSION(1:SPACE2_RANK,1:POINT1_NPOINTS) :: temp_coord2 ! Coordinates for point selection 
-  INTEGER(hsize_t), DIMENSION(1:SPACE3_RANK,1:POINT1_NPOINTS) :: coord3 ! Coordinates for point selection 
-  INTEGER(hsize_t), DIMENSION(1:SPACE3_RANK,1:POINT1_NPOINTS) :: temp_coord3 ! Coordinates for point selection 
-  INTEGER(hssize_t) :: npoints
-
-!!$    uint8_t    *wbuf,        buffer to write to disk 
-!!$               *rbuf,        buffer read from disk 
-!!$               *tbuf;        temporary buffer pointer 
-  INTEGER :: i,j;        ! Counters 
-!    struct pnt_iter pi;      Custom Pointer iterator struct 
-  INTEGER :: error    ! Generic return value		
-  CHARACTER(LEN=9) :: filename = 'h5s_hyper'
-  CHARACTER(LEN=80) :: fix_filename 
-  CHARACTER(LEN=1), DIMENSION(1:SPACE2_DIM1,1:SPACE2_DIM2) :: wbuf
-
-  CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error)
-  IF (error .NE. 0) THEN
-     WRITE(*,*) "Cannot modify filename"
-     STOP
-  ENDIF
-  xfer_plist = H5P_DEFAULT_F
-!    MESSAGE(5, ("Testing Element Selection Functions\n"));
-
-    ! Allocate write & read buffers 
-!!$  wbuf = HDmalloc(sizeof(uint8_t) * SPACE2_DIM1 * SPACE2_DIM2);
-!!$  rbuf = HDcalloc(sizeof(uint8_t), (size_t)(SPACE3_DIM1 * SPACE3_DIM2));
-!!$
-  ! Initialize WRITE buffer 
-
-  DO i = 1, SPACE2_DIM1
-     DO j = 1, SPACE2_DIM2
-        wbuf(i,j) = 'a'
-     ENDDO
-  ENDDO
-
-!!$  for(i=0, tbuf=wbuf; i<SPACE2_DIM1; i++)
-!!$  for(j=0; j<SPACE2_DIM2; j++)
-!!$  *tbuf++=(uint8_t)((i*SPACE2_DIM2)+j);
-  
-  ! Create file 
-  CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, fid1, error)
-  CALL check("h5fcreate_f", error, total_error)
-  
-  ! Create dataspace for dataset 
-  CALL h5screate_simple_f(SPACE1_RANK, dims1, sid1, error)
-  CALL check("h5screate_simple_f", error, total_error)
-
-  ! Create dataspace for write buffer 
-  CALL h5screate_simple_f(SPACE2_RANK, dims2, sid2, error)
-  CALL check("h5screate_simple_f", error, total_error)
-
-  ! Select sequence of ten points for disk dataset 
-  coord1(1,1)=1; coord1(2,1)=11; coord1(3,1)= 6;
-  coord1(1,2)=2; coord1(2,2)= 3; coord1(3,2)= 8;
-  coord1(1,3)=3; coord1(2,3)= 5; coord1(3,3)=10;
-  coord1(1,4)=1; coord1(2,4)= 7; coord1(3,4)=12;
-  coord1(1,5)=2; coord1(2,5)= 9; coord1(3,5)=14;
-  coord1(1,6)=3; coord1(2,6)=13; coord1(3,6)= 1;
-  coord1(1,7)=1; coord1(2,7)=15; coord1(3,7)= 3;
-  coord1(1,8)=2; coord1(2,8)= 1; coord1(3,8)= 5;
-  coord1(1,9)=3; coord1(2,9)= 2; coord1(3,9)= 7;
-  coord1(1,10)=1; coord1(2,10)= 4; coord1(3,10)= 9
-
-  CALL h5sselect_elements_f(sid1, H5S_SELECT_SET_F, SPACE1_RANK, INT(POINT1_NPOINTS,size_t), coord1, error)
-  CALL check("h5sselect_elements_f", error, total_error)
-
-  ! Verify correct elements selected 
-
-  CALL h5sget_select_elem_pointlist_f(sid1, INT(0,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord1,error)
-  CALL check("h5sget_select_elem_pointlist_f", error, total_error)
-
-  DO i= 1, POINT1_NPOINTS
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(1,i)), INT(coord1(1,i)), total_error)
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(2,i)), INT(coord1(2,i)), total_error)
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(3,i)), INT(coord1(3,i)), total_error)
-  ENDDO
-
-  CALL H5Sget_select_npoints_f(sid1, npoints, error)
-  CALL check("h5sget_select_npoints_f", error, total_error)
-  CALL verify("h5sget_select_npoints_f", INT(npoints), 10, total_error)
-
-  ! Append another sequence of ten points to disk dataset 
-
-  coord1(1,1)=1; coord1(2,1)=3; coord1(3,1)= 1;
-  coord1(1,2)=2; coord1(2,2)=11; coord1(3,2)= 9;
-  coord1(1,3)=3; coord1(2,3)= 9; coord1(3,3)=11;
-  coord1(1,4)=1; coord1(2,4)= 8; coord1(3,4)=13;
-  coord1(1,5)=2; coord1(2,5)= 4; coord1(3,5)=12;
-  coord1(1,6)=3; coord1(2,6)= 2; coord1(3,6)= 2;
-  coord1(1,7)=1; coord1(2,7)=14; coord1(3,7)= 8;
-  coord1(1,8)=2; coord1(2,8)=15; coord1(3,8)= 7;
-  coord1(1,9)=3; coord1(2,9)= 3; coord1(3,9)= 6;
-  coord1(1,10)=1; coord1(2,10)= 7; coord1(3,10)= 14
-
-
-  CALL h5sselect_elements_f(sid1, H5S_SELECT_APPEND_F, SPACE1_RANK, INT(POINT1_NPOINTS,size_t), coord1, error)
-  CALL check("h5sselect_elements_f", error, total_error)
-  !  Verify correct elements selected 
-  
-  CALL h5sget_select_elem_pointlist_f(sid1, INT(POINT1_NPOINTS,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord1,error)
-  CALL check("h5sget_select_elem_pointlist_f", error, total_error)
-
-  DO i= 1, POINT1_NPOINTS
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(1,i)), INT(coord1(1,i)), total_error)
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(2,i)), INT(coord1(2,i)), total_error)
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(3,i)), INT(coord1(3,i)), total_error)
-  ENDDO
-
-  CALL H5Sget_select_npoints_f(sid1, npoints, error)
-  CALL check("h5sget_select_npoints_f", error, total_error)
-  CALL verify("h5sget_select_npoints_f", INT(npoints), 20, total_error)
-
-  !  Select sequence of ten points for memory dataset 
-  coord2(1,1)=13; coord2(2,1)= 4;
-  coord2(1,2)=16; coord2(2,2)=14;
-  coord2(1,3)= 8; coord2(2,3)=26;
-  coord2(1,4)= 1; coord2(2,4)= 7;
-  coord2(1,5)=14; coord2(2,5)= 1;
-  coord2(1,6)=25; coord2(2,6)=12;
-  coord2(1,7)=13; coord2(2,7)=22;
-  coord2(1,8)=30; coord2(2,8)= 5;
-  coord2(1,9)= 9; coord2(2,9)= 9;
-  coord2(1,10)=20; coord2(2,10)=18
-
-  CALL h5sselect_elements_f(sid2, H5S_SELECT_SET_F, SPACE2_RANK, INT(POINT1_NPOINTS,size_t), coord2, error)
-  CALL check("h5sselect_elements_f", error, total_error)
-
-
-  ! Verify correct elements selected 
-  
-  CALL h5sget_select_elem_pointlist_f(sid2, INT(0,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord2,error)
-  CALL check("h5sget_select_elem_pointlist_f", error, total_error)
-
-  DO i= 1, POINT1_NPOINTS
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord2(1,i)), INT(coord2(1,i)), total_error)
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord2(2,i)), INT(coord2(2,i)), total_error)
-  ENDDO
-
-!!$
-!!$     Save points for later iteration 
-!!$     (these are in the second half of the buffer, because we are prepending 
-!!$      the next list of points to the beginning of the point selection list) 
-!!$    HDmemcpy(((char *)pi.coord)+sizeof(coord2),coord2,sizeof(coord2));
-!!$
-
-  CALL H5Sget_select_npoints_f(sid2, npoints, error)
-  CALL check("h5sget_select_npoints_f", error, total_error)
-  CALL verify("h5sget_select_npoints_f", INT(npoints), 10, total_error)
-
-  ! Append another sequence of ten points to memory dataset 
-  coord2(1,1)=25; coord2(2,1)= 1;
-  coord2(1,2)= 3; coord2(2,2)=26;
-  coord2(1,3)=14; coord2(2,3)=18;
-  coord2(1,4)= 9; coord2(2,4)= 4;
-  coord2(1,5)=30; coord2(2,5)= 5;
-  coord2(1,6)=12; coord2(2,6)=15;
-  coord2(1,7)= 6; coord2(2,7)=23;
-  coord2(1,8)=13; coord2(2,8)= 3;
-  coord2(1,9)=22; coord2(2,9)=13;
-  coord2(1,10)= 10; coord2(2,10)=19
-
-  CALL h5sselect_elements_f(sid2, H5S_SELECT_PREPEND_F, SPACE2_RANK, INT(POINT1_NPOINTS,size_t), coord2, error)
-  CALL check("h5sselect_elements_f", error, total_error)
-
-
-  ! Verify correct elements selected 
-  CALL h5sget_select_elem_pointlist_f(sid2, INT(0,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord2,error)
-  CALL check("h5sget_select_elem_pointlist_f", error, total_error)
-
-  DO i= 1, POINT1_NPOINTS
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord2(1,i)), INT(coord2(1,i)), total_error)
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord2(2,i)), INT(coord2(2,i)), total_error)
-  ENDDO
-
-  CALL H5Sget_select_npoints_f(sid2, npoints, error)
-  CALL check("h5sget_select_npoints_f", error, total_error)
-  CALL verify("h5sget_select_npoints_f", INT(npoints), 20, total_error)
-
-!!$     Save points for later iteration 
-!!$    HDmemcpy(pi.coord,coord2,sizeof(coord2));
-
-  !  Create a dataset 
-  CALL h5dcreate_f(fid1, "Dataset1", H5T_NATIVE_CHARACTER, sid1, dataset, error)
-  CALL check("h5dcreate_f", error, total_error)
-
-  !  Write selection to disk 
-  CALL h5dwrite_f(dataset, H5T_NATIVE_CHARACTER, wbuf, dims2, error, sid2, sid1, xfer_plist)
-  CALL check("h5dwrite_f", error, total_error)
-
-  !  Close memory dataspace 
-  CALL h5sclose_f(sid2, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  !  Create dataspace for reading buffer 
-  CALL h5screate_simple_f(SPACE3_RANK, dims3, sid2, error)
-  CALL check("h5screate_simple_f", error, total_error)
-
-  !  Select sequence of points for read dataset 
-  coord3(1,1)= 1; coord3(2,1)= 3;
-  coord3(1,2)= 5; coord3(2,2)= 9;
-  coord3(1,3)=14; coord3(2,3)=14;
-  coord3(1,4)=15; coord3(2,4)=21;
-  coord3(1,5)= 8; coord3(2,5)=10;
-  coord3(1,6)= 3; coord3(2,6)= 1;
-  coord3(1,7)= 10; coord3(2,7)=20;
-  coord3(1,8)= 2; coord3(2,8)=23;
-  coord3(1,9)=13; coord3(2,9)=22;
-  coord3(1,10)=12; coord3(2,10)=7;
-
-  CALL h5sselect_elements_f(sid2, H5S_SELECT_SET_F, SPACE3_RANK, INT(POINT1_NPOINTS,size_t), coord3, error)
-  CALL check("h5sselect_elements_f", error, total_error)
-
-  !  Verify correct elements selected 
-  CALL h5sget_select_elem_pointlist_f(sid2, INT(0,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord3,error)
-  CALL check("h5sget_select_elem_pointlist_f", error, total_error)
-  DO i= 1, POINT1_NPOINTS
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord3(1,i)), INT(coord3(1,i)), total_error)
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord3(2,i)), INT(coord3(2,i)), total_error)
-  ENDDO
-
-  CALL H5Sget_select_npoints_f(sid2, npoints, error)
-  CALL check("h5sget_select_npoints_f", error, total_error)
-  CALL verify("h5sget_select_npoints_f", INT(npoints), 10, total_error)
-
-  ! Append another sequence of ten points to disk dataset 
-    coord3(1,1)=15; coord3(2,1)=26;
-    coord3(1,2)= 1; coord3(2,2)= 1;
-    coord3(1,3)=12; coord3(2,3)=12;
-    coord3(1,4)= 6; coord3(2,4)=15;
-    coord3(1,5)= 4; coord3(2,5)= 6;
-    coord3(1,6)= 3; coord3(2,6)= 3;
-    coord3(1,7)= 8; coord3(2,7)=14;
-    coord3(1,8)=10; coord3(2,8)=17;
-    coord3(1,9)=13; coord3(2,9)=23;
-    coord3(1,10)=14; coord3(2,10)=10
-
-    CALL h5sselect_elements_f(sid2, H5S_SELECT_APPEND_F, SPACE3_RANK, INT(POINT1_NPOINTS,size_t), coord3, error)
-    CALL check("h5sselect_elements_f", error, total_error)
-
-  !  Verify correct elements selected 
-  CALL h5sget_select_elem_pointlist_f(sid2, INT(POINT1_NPOINTS,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord3,error)
-  CALL check("h5sget_select_elem_pointlist_f", error, total_error)
-  DO i= 1, POINT1_NPOINTS
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord3(1,i)), INT(coord3(1,i)), total_error)
-     CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord3(2,i)), INT(coord3(2,i)), total_error)
-  ENDDO
-
-  CALL H5Sget_select_npoints_f(sid2, npoints, error)
-  CALL check("h5sget_select_npoints_f", error, total_error)
-  CALL verify("h5sget_select_npoints_f", INT(npoints), 20, total_error)
-
-! F2003 feature
-!!$  Read selection from disk 
-!!$    ret=H5Dread(dataset,H5T_NATIVE_UCHAR,sid2,sid1,xfer_plist,rbuf);
-!!$    CHECK(ret, FAIL, "H5Dread");
-!!$
-!!$     Check that the values match with a dataset iterator 
-!!$    pi.buf=wbuf;
-!!$    pi.offset=0;
-!!$    ret = H5Diterate(rbuf,H5T_NATIVE_UCHAR,sid2,test_select_point_iter1,&pi);
-!!$    CHECK(ret, FAIL, "H5Diterate");
-!!$
-! F2003 feature
-
-  ! Close memory dataspace 
-  CALL h5sclose_f(sid2, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  ! Close disk dataspace 
-  CALL h5sclose_f(sid1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  ! Close Dataset 
-  CALL h5dclose_f(dataset, error)
-  CALL check("h5dclose_f", error, total_error)
-
-  ! Close file 
-  CALL h5fclose_f(fid1, error)
-  CALL check("h5fclose_f", error, total_error)
-
-  IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error)
-  CALL check("h5_cleanup_f", error, total_error)
-
-END SUBROUTINE test_select_point
-
-
-!***************************************************************
-!**
-!**  test_select_combine(): Test basic H5S (dataspace) selection code.
-!**      Tests combining "all" and "none" selections with hyperslab
-!**      operations.
-!**
-!***************************************************************
-
-SUBROUTINE test_select_combine(total_error)
-  
-  IMPLICIT NONE
-  INTEGER, INTENT(INOUT) :: total_error
-
-  INTEGER, PARAMETER :: SPACE7_RANK = 2
-  INTEGER, PARAMETER :: SPACE7_DIM1 = 10
-  INTEGER, PARAMETER :: SPACE7_DIM2 = 10
-  
-  INTEGER(hid_t) :: base_id !       Base dataspace for test 
-  INTEGER(hid_t) :: all_id !        Dataspace for "all" selection 
-  INTEGER(hid_t) :: none_id !       Dataspace for "none" selection 
-  INTEGER(hid_t) :: space1 !        Temporary dataspace #1 
-  INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: start !  Hyperslab start 
-  INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: stride !  Hyperslab stride 
-  INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: icount !  Hyperslab count 
-  INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: iblock !  Hyperslab BLOCK 
-  INTEGER(hsize_t), DIMENSION(1:SPACE7_RANK) :: dims = (/SPACE7_DIM1,SPACE7_DIM2/) ! Dimensions of dataspace 
-  INTEGER :: sel_type !  Selection type 
-  INTEGER(hssize_t) :: nblocks   ! Number of hyperslab blocks 
-  INTEGER(hsize_t), DIMENSION(1:128,1:2,1:SPACE7_RANK) :: blocks !  List of blocks 
-  INTEGER :: error, area
-
-  ! Create dataspace for dataset on disk 
-  CALL h5screate_simple_f(SPACE7_RANK, dims, base_id, error)
-  CALL check("h5screate_simple_f", error, total_error)
-
-  !  Copy base dataspace and set selection to "all" 
-  CALL h5scopy_f(base_id, all_id, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  CALL H5Sselect_all_f(all_id, error)
-  CALL check("H5Sselect_all_f", error, total_error)
-
-  CALL H5Sget_select_type_f(all_id, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_ALL_F), total_error)
-
-  ! Copy base dataspace and set selection to "none" 
-  CALL h5scopy_f(base_id, none_id, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  CALL H5Sselect_none_f(none_id, error)
-  CALL check("H5Sselect_none_f", error, total_error)
-
-  CALL H5Sget_select_type_f(none_id, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_NONE_F), total_error)
-  
-  ! Copy "all" selection & space 
-  CALL H5Scopy_f(all_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  ! 'OR' "all" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/)
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_OR_F, start, &
-                                icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  ! Verify that it's still "all" selection 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_ALL_F), total_error)
-
-  ! Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  ! Copy "all" selection & space 
-  CALL H5Scopy_f(all_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  !  'AND' "all" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/)
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_AND_F, start, &
-       icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  ! Verify that the new selection is the same at the original block 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error)
-
-  ! Verify that there is only one block 
-  CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error)
-  CALL check("h5sget_select_hyper_nblocks_f", error, total_error)
-  CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error)
-  
-  ! Retrieve the block defined 
-  CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error)
-  CALL check("h5sget_select_hyper_blocklist_f", error, total_error)
-
-  ! Verify that the correct block is defined 
-
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error)
-
-  ! Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  ! Copy "all" selection & space 
-  CALL H5Scopy_f(all_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  !  'XOR' "all" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/)
-
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_XOR_F, start, &
-       icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  !  Verify that the new selection is an inversion of the original block 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error)
-
-  !  Verify that there are two blocks 
-  CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error)
-  CALL check("h5sget_select_hyper_nblocks_f", error, total_error)
-  CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 2, total_error)
-
-  !  Retrieve the block defined 
-
-  blocks = -1 !  Reset block list 
-  CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error)
-  CALL check("h5sget_select_hyper_blocklist_f", error, total_error)
-
-  !  Verify that the correct block is defined 
-
-  ! No guarantee is implied as the order in which blocks are listed. 
-  ! So this will ONLY work for square domains iblock(1:2) = (/5,5/)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 5, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 10, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(5,1,1)), 6, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(6,1,1)), 1, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(7,1,1)), 10, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(8,1,1)), 10, total_error)
-
-  ! Otherwise make sure the "area" of the block is correct
-  area = (ABS(INT(blocks(1,1,1)-blocks(3,1,1)))+1)*(ABS(INT(blocks(2,1,1)-blocks(4,1,1)))+1)
-  area = area + (ABS(INT(blocks(5,1,1)-blocks(7,1,1)))+1)*(ABS(INT(blocks(6,1,1)-blocks(8,1,1)))+1)
-  CALL verify("h5sget_select_hyper_blocklist_f", area, 80, total_error)
-
-  ! Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  !  Copy "all" selection & space 
-  CALL H5Scopy_f(all_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  !  'NOTB' "all" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/) !5
-
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_NOTB_F, start, &
-       icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  !  Verify that the new selection is an inversion of the original block 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error)
-
-  !  Verify that there are two blocks 
-  CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error)
-  CALL check("h5sget_select_hyper_nblocks_f", error, total_error)
-  CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 2, total_error)
-
-  !  Retrieve the block defined 
-  blocks = -1 !  Reset block list 
-  CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error)
-  CALL check("h5sget_select_hyper_blocklist_f", error, total_error)
-
-  !  Verify that the correct block is defined  
-
-  ! No guarantee is implied as the order in which blocks are listed. 
-  ! So this will ONLY work for square domains iblock(1:2) = (/5,5/)
-
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 5, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)),10, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(5,1,1)), 6, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(6,1,1)), 1, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(7,1,1)),10, total_error)
-!!$  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(8,1,1)),10, total_error)
-
-  ! Otherwise make sure the "area" of the block is correct
-  area = (ABS(INT(blocks(1,1,1)-blocks(3,1,1)))+1)*(ABS(INT(blocks(2,1,1)-blocks(4,1,1)))+1)
-  area = area + (ABS(INT(blocks(5,1,1)-blocks(7,1,1)))+1)*(ABS(INT(blocks(6,1,1)-blocks(8,1,1)))+1)
-  CALL verify("h5sget_select_hyper_blocklist_f", area, 80, total_error)
-
-
-  !  Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-  !  Copy "all" selection & space 
-  CALL H5Scopy_f(all_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  !  'NOTA' "all" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/) !5
-
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_NOTA_F, start, &
-       icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  ! Verify that the new selection is the "none" selection 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error)
-
-  !  Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  !  Copy "none" selection & space 
-  CALL H5Scopy_f(none_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  !  'OR' "none" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/) !5
-
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_OR_F, start, &
-       icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  !  Verify that the new selection is the same as the original hyperslab 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error)
-  
-
-  !  Verify that there is only one block 
-  CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error)
-  CALL check("h5sget_select_hyper_nblocks_f", error, total_error)
-  CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error)
-
-  !  Retrieve the block defined 
-  blocks = -1 !  Reset block list 
-  CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error)
-  CALL check("h5sget_select_hyper_blocklist_f", error, total_error)
-
-  !  Verify that the correct block is defined 
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error)
-
-  !  Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  !  Copy "none" selection & space 
-  CALL H5Scopy_f(none_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  !  'AND' "none" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/) !5
-
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_AND_F, start, &
-       icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  !  Verify that the new selection is the "none" selection 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error)
-
-  !  Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  !  Copy "none" selection & space 
-  CALL H5Scopy_f(none_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  !  'XOR' "none" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/) !5
-
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_XOR_F, start, &
-       icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  !  Verify that the new selection is the same as the original hyperslab 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error)
-  
-
-  !  Verify that there is only one block 
-  CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error)
-  CALL check("h5sget_select_hyper_nblocks_f", error, total_error)
-  CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error)
-
-  !  Retrieve the block defined 
-  blocks = -1 !  Reset block list 
-  CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error)
-  CALL check("h5sget_select_hyper_blocklist_f", error, total_error)
-  !  Verify that the correct block is defined 
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error)
-  
-  !  Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  !  Copy "none" selection & space 
-  CALL H5Scopy_f(none_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  !  'NOTB' "none" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/) !5
-
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_NOTB_F, start, &
-       icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  !  Verify that the new selection is the "none" selection 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error)
-
-  !  Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  !  Copy "none" selection & space 
-  CALL H5Scopy_f(none_id, space1, error)  
-  CALL check("h5scopy_f", error, total_error)
-
-  !  'NOTA' "none" selection with another hyperslab 
-  start(1:2) = 0
-  stride(1:2) = 1
-  icount(1:2) = 1
-  iblock(1:2) = (/5,4/) !5  
-  CALL h5sselect_hyperslab_f(space1, H5S_SELECT_NOTA_F, start, &
-       icount, error, stride, iblock) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  !  Verify that the new selection is the same as the original hyperslab 
-  CALL H5Sget_select_type_f(space1, sel_type, error)
-  CALL check("H5Sget_select_type_f", error, total_error)
-  CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error)
-    
-  !  Verify that there is ONLY one BLOCK 
-  CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error)
-  CALL check("h5sget_select_hyper_nblocks_f", error, total_error)
-  CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error)
-
-  !  Retrieve the block defined 
-
-  blocks = -1 !  Reset block list 
-  CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error)
-  CALL check("h5sget_select_hyper_blocklist_f", error, total_error)
-
-
-  !  Verify that the correct block is defined 
-
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error)
-  CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error)
-  
-  !  Close temporary dataspace 
-  CALL h5sclose_f(space1, error)
-  CALL check("h5sclose_f", error, total_error)
-
-  !  Close dataspaces 
-  
-  CALL h5sclose_f(base_id, error)
-  CALL check("h5sclose_f", error, total_error)
-  CALL h5sclose_f(all_id, error)
-  CALL check("h5sclose_f", error, total_error)
-  CALL h5sclose_f(none_id, error)
-  CALL check("h5sclose_f", error, total_error)
-
-END SUBROUTINE test_select_combine
-
-!***************************************************************
-!**
-!**  test_select_bounds(): Tests selection bounds on dataspaces,
-!**      both with and without offsets.
-!**
-!***************************************************************
-
-SUBROUTINE test_select_bounds(total_error)
-  
-  IMPLICIT NONE
-  INTEGER, INTENT(INOUT) :: total_error
-
-  INTEGER, PARAMETER :: SPACE11_RANK=2
-  INTEGER, PARAMETER :: SPACE11_DIM1=100
-  INTEGER, PARAMETER :: SPACE11_DIM2=50
-  INTEGER, PARAMETER :: SPACE11_NPOINTS=4
-  
-  INTEGER(hid_t) :: sid !  Dataspace ID 
-  INTEGER(hsize_t), DIMENSION(1:SPACE11_RANK) :: dims = (/SPACE11_DIM1, SPACE11_DIM2/) !Dataspace dimensions
-  INTEGER(hsize_t), DIMENSION(SPACE11_RANK, SPACE11_NPOINTS) :: coord ! Coordinates for point selection
-  INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: start !  The start of the hyperslab 
-  INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: stride ! The stride between block starts for the hyperslab 
-  INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: count ! The number of blocks for the hyperslab 
-  INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: BLOCK ! The size of each block for the hyperslab 
-  INTEGER(hssize_t), DIMENSION(SPACE11_RANK) :: offset ! Offset amount for selection 
-  INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: low_bounds ! The low bounds for the selection 
-  INTEGER(hsize_t), DIMENSION(SPACE11_RANK) :: high_bounds ! The high bounds for the selection 
-    
-  INTEGER :: error
-
-  ! Create dataspace 
-  CALL h5screate_simple_f(SPACE11_RANK, dims, sid, error)
-  CALL check("h5screate_simple_f", error, total_error)
-
-  !  Get bounds for 'all' selection 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL check("h5sget_select_bounds_f", error, total_error)
-
-  CALL verify("h5sget_select_bounds_f", low_bounds(1), 1_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1, hsize_t), total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2, hsize_t), total_error)
-
-  ! Set offset for selection 
-  offset(1:2) = 1
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  ! Get bounds for 'all' selection with offset (which should be ignored) 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL check("h5sget_select_bounds_f", error, total_error)
-
-  CALL verify("h5sget_select_bounds_f", low_bounds(1), 1_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error)
-  CALL VERIFY("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1, hsize_t), total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2, hsize_t), total_error)
-
-  ! Reset offset for selection 
-  offset(1:2) = 0
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  ! Set 'none' selection 
-  CALL H5Sselect_none_f(sid, error)
-  CALL check("H5Sselect_none_f", error, total_error)
-
-  ! Get bounds for 'none' selection, should fail 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL verify("h5sget_select_bounds_f", error, -1, total_error)
-
-  ! Set point selection 
-  
-  coord(1,1)=  3; coord(2,1)=  3;
-  coord(1,2)=  3; coord(2,2)= 46;
-  coord(1,3)= 96; coord(2,3)=  3;
-  coord(1,4)= 96; coord(2,4)= 46;
-
-  CALL h5sselect_elements_f(sid, H5S_SELECT_SET_F, SPACE11_RANK, INT(SPACE11_NPOINTS,size_t), coord, error)
-  CALL check("h5sselect_elements_f", error, total_error)
-
-  ! Get bounds for point selection 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL check("h5sget_select_bounds_f", error, total_error)
-
-  CALL verify("h5sget_select_bounds_f", low_bounds(1), 3_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", low_bounds(2), 3_hsize_t, total_error)
-  CALL VERIFY("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1-4,hsize_t), total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2-4,hsize_t), total_error)
-
-  !  Set bad offset for selection 
-
-  offset(1:2) = (/5,-5/)
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  !  Get bounds for hyperslab selection with negative offset 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL verify("h5sget_select_bounds_f", error, -1, total_error)
- 
-  !  Set valid offset for selection 
-  offset(1:2) = (/2,-2/)
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  !  Get bounds for point selection with offset 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL check("h5sget_select_bounds_f", error, total_error)
-
-  CALL verify("h5sget_select_bounds_f", low_bounds(1), 5_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1-2,hsize_t), total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2-6,hsize_t), total_error)
-
-  !  Reset offset for selection 
-  offset(1:2) = 0
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  !  Set "regular" hyperslab selection 
-  start(1:2) = 2
-  stride(1:2) = 10
-  count(1:2) = 4
-  block(1:2) = 5
-  
-  CALL h5sselect_hyperslab_f(sid, H5S_SELECT_SET_F, start, &
-       count, error, stride, block) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  ! Get bounds for hyperslab selection 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL check("h5sget_select_bounds_f", error, total_error)
-
-  CALL verify("h5sget_select_bounds_f", low_bounds(1), 3_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", low_bounds(2), 3_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(1), 37_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(2), 37_hsize_t, total_error)
-
-  ! Set bad offset for selection 
-  offset(1:2) = (/5,-5/)
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  !  Get bounds for hyperslab selection with negative offset 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL verify("h5sget_select_bounds_f", error, -1, total_error)
-
-  !  Set valid offset for selection 
-  offset(1:2) = (/5,-2/)
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  ! Get bounds for hyperslab selection with offset 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL check("h5sget_select_bounds_f", error, total_error)
-
-  CALL verify("h5sget_select_bounds_f", low_bounds(1), 8_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(1), 42_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(2), 35_hsize_t, total_error)
-
-  ! Reset offset for selection 
-  offset(1:2) = 0
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-  
-  !  Make "irregular" hyperslab selection 
-  start(1:2) = 20
-  stride(1:2) = 20
-  count(1:2) = 2
-  block(1:2) = 10
-
-  CALL h5sselect_hyperslab_f(sid, H5S_SELECT_OR_F, start, &
-       count, error, stride, block) 
-  CALL check("h5sselect_hyperslab_f", error, total_error)
-
-  ! Get bounds for hyperslab selection 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL check("h5sget_select_bounds_f", error, total_error)
-
-  CALL verify("h5sget_select_bounds_f", low_bounds(1), 3_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", low_bounds(2), 3_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(1), 50_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(2), 50_hsize_t, total_error)
-
-  !  Set bad offset for selection 
-  offset(1:2) = (/5,-5/)
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  !  Get bounds for hyperslab selection with negative offset 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL verify("h5sget_select_bounds_f", error, -1, total_error)
-
-  ! Set valid offset for selection 
-  offset(1:2) = (/5,-2/)
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  ! Get bounds for hyperslab selection with offset 
-  CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error)
-  CALL check("h5sget_select_bounds_f", error, total_error)
-
-  CALL verify("h5sget_select_bounds_f", low_bounds(1), 8_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(1), 55_hsize_t, total_error)
-  CALL verify("h5sget_select_bounds_f", high_bounds(2), 48_hsize_t, total_error)
-
-  ! Reset offset for selection 
-  offset(1:2) = 0
-  CALL H5Soffset_simple_f(sid, offset, error)
-  CALL check("H5Soffset_simple_f", error, total_error)
-
-  ! Close the dataspace 
-  CALL h5sclose_f(sid, error)
-  CALL check("h5sclose_f", error, total_error)
-
-END SUBROUTINE test_select_bounds
-
-END MODULE TH5SSELECT