[svn-r27638] Merged r27500-27631 from trunk.

1 files changed, 1149 insertions, 0 deletions

diff --git a/fortran/test/tH5T.F90 b/fortran/test/tH5T.F90
new file mode 100644
index 0000000..efbceea
--- /dev/null
+++ b/fortran/test/tH5T.F90
@@ -0,0 +1,1149 @@
+!****h* root/fortran/test/tH5T.f90
+!
+! NAME
+!  tH5T.f90
+!
+! FUNCTION
+!  Basic testing of Fortran H5T APIs.
+!
+! COPYRIGHT
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!   Copyright by The HDF Group.                                               *
+!   Copyright by the Board of Trustees of the University of Illinois.         *
+!   All rights reserved.                                                      *
+!                                                                             *
+!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
+!   terms governing use, modification, and redistribution, is contained in    *
+!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
+!   of the source code distribution tree; Copyright.html can be found at the  *
+!   root level of an installed copy of the electronic HDF5 document set and   *
+!   is linked from the top-level documents page.  It can also be found at     *
+!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+!   access to either file, you may request a copy from help@hdfgroup.org.     *
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!
+! CONTAINS SUBROUTINES
+!  compoundtest, basic_data_type_test, enumtest, test_derived_flt
+!
+!*****
+
+MODULE TH5T
+
+  USE HDF5
+  USE TH5_MISC
+  USE TH5_MISC_GEN
+
+CONTAINS
+
+    SUBROUTINE compoundtest(cleanup, total_error)
+!
+! This program creates a dataset that is one dimensional array of
+! structures  {
+!                 character*2
+!                 integer
+!                 double precision
+!                 real
+!                                   }
+! Data is written and read back by fields.
+!
+! The following H5T interface functions are tested:
+! h5tcopy_f, h5tset(get)_size_f, h5tcreate_f, h5tinsert_f,  h5tclose_f,
+! h5tget_class_f, h5tget_member_name_f, h5tget_member_offset_f, h5tget_member_type_f,
+! h5tequal_f, h5tinsert_array_f, h5tcommit_f, h5tencode_f, h5tdecode_f
+
+
+     IMPLICIT NONE
+     LOGICAL, INTENT(IN)  :: cleanup
+     INTEGER, INTENT(OUT) :: total_error
+
+     CHARACTER(LEN=8), PARAMETER :: filename = "compound" ! File name
+     CHARACTER(LEN=80) :: fix_filename
+     CHARACTER(LEN=8), PARAMETER :: dsetname = "Compound"     ! Dataset name
+     INTEGER, PARAMETER :: dimsize = 6 ! Size of the dataset
+     INTEGER, PARAMETER :: COMP_NUM_MEMBERS = 4 ! Number of members in the compound datatype
+
+     INTEGER(HID_T) :: file_id       ! File identifier
+     INTEGER(HID_T) :: dset_id       ! Dataset identifier
+     INTEGER(HID_T) :: dspace_id     ! Dataspace identifier
+     INTEGER(HID_T) :: dtype_id      ! Compound datatype identifier
+     INTEGER(HID_T) :: dtarray_id    ! Compound datatype identifier
+     INTEGER(HID_T) :: arrayt_id    ! Array datatype identifier
+     INTEGER(HID_T) :: dt1_id      ! Memory datatype identifier (for character field)
+     INTEGER(HID_T) :: dt2_id      ! Memory datatype identifier (for integer field)
+     INTEGER(HID_T) :: dt3_id      ! Memory datatype identifier (for double precision field)
+     INTEGER(HID_T) :: dt4_id      ! Memory datatype identifier (for real field)
+     INTEGER(HID_T) :: dt5_id      ! Memory datatype identifier
+     INTEGER(HID_T) :: membtype_id ! Datatype identifier
+     INTEGER(HID_T) :: plist_id    ! Dataset trasfer property
+
+
+     INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/dimsize/) ! Dataset dimensions
+     INTEGER     ::   rank = 1                            ! Dataset rank
+
+     INTEGER     ::   error ! Error flag
+     INTEGER(SIZE_T)     ::   type_size  ! Size of the datatype
+     INTEGER(SIZE_T)     ::   type_sizec  ! Size of the character datatype
+     INTEGER(SIZE_T)     ::   type_sizei  ! Size of the integer datatype
+     INTEGER(SIZE_T)     ::   type_sized  ! Size of the double precision datatype
+     INTEGER(SIZE_T)     ::   type_sizer  ! Size of the real datatype
+     INTEGER(SIZE_T)     ::   offset     ! Member's offset
+     INTEGER(SIZE_T)     ::   offset_out     ! Member's offset
+     CHARACTER(LEN=2), DIMENSION(dimsize)      :: char_member
+     CHARACTER(LEN=2), DIMENSION(dimsize)      :: char_member_out ! Buffer to read data out
+     INTEGER, DIMENSION(dimsize)          :: int_member
+     INTEGER, DIMENSION(dimsize)          :: int_member_out
+     REAL(KIND=Fortran_DOUBLE), DIMENSION(dimsize) :: double_member
+     REAL(KIND=Fortran_DOUBLE), DIMENSION(dimsize) :: double_member_out
+     REAL, DIMENSION(dimsize)             :: real_member
+     REAL, DIMENSION(dimsize)             :: real_member_out
+     INTEGER :: i
+     INTEGER :: class ! Datatype class
+     INTEGER :: num_members ! Number of members in the compound datatype
+     CHARACTER(LEN=256) :: member_name
+     INTEGER :: len ! Lenght of the name of the compound datatype member
+     INTEGER :: member_index ! index of the field
+     INTEGER(HSIZE_T), DIMENSION(3) :: array_dims=(/2,3,4/)
+     INTEGER :: array_dims_range = 3
+     INTEGER :: elements = 24 ! number of elements in the array_dims array.
+     INTEGER(SIZE_T) :: sizechar
+     INTEGER(HSIZE_T), DIMENSION(1) :: data_dims
+     LOGICAL :: flag = .TRUE.
+
+     CHARACTER(LEN=1024) :: cmpd_buf
+     INTEGER(SIZE_T) :: cmpd_buf_size=0
+     INTEGER(HID_T) :: decoded_tid1
+
+     INTEGER(HID_T) :: fixed_str1, fixed_str2
+     LOGICAL :: are_equal
+     INTEGER(SIZE_T), PARAMETER :: str_size = 10 
+     INTEGER(SIZE_T) :: query_size
+
+     ! Test h5tcreate_f with H5T_STRING_F option:
+     !   Create fixed-length string in two ways and make sure they are the same
+
+     CALL h5tcopy_f(H5T_FORTRAN_S1, fixed_str1, error)
+     CALL check("h5tcopy_f", error, total_error)
+     CALL h5tset_size_f(fixed_str1, str_size, error)
+     CALL check("h5tset_size_f", error, total_error)
+     CALL h5tset_strpad_f(fixed_str1, H5T_STR_NULLTERM_F, error)
+     CALL check("h5tset_strpad_f", error, total_error)
+     
+     CALL h5tcreate_f(H5T_STRING_F, str_size, fixed_str2, error)
+     CALL check("h5tcreate_f", error, total_error)
+     CALL h5tset_strpad_f(fixed_str2, H5T_STR_NULLTERM_F, error)
+     CALL check("h5tset_strpad_f", error, total_error)
+     
+     CALL h5tequal_f(fixed_str1, fixed_str2, are_equal, error)
+     IF(.NOT.are_equal)THEN
+        CALL check("h5tcreate_f", -1, total_error)
+     ENDIF
+     
+     CALL h5tget_size_f(fixed_str1, query_size, error)
+     CALL check("h5tget_size_f", error, total_error)
+     
+     IF(query_size.NE.str_size)THEN
+        CALL check("h5tget_size_f", -1, total_error)
+     ENDIF
+     
+     CALL h5tget_size_f(fixed_str2, query_size, error)
+     CALL check("h5tget_size_f", error, total_error)
+
+     IF(query_size.NE.str_size)THEN
+        CALL check("h5tget_size_f", -1, total_error)
+     ENDIF
+     
+     CALL h5tclose_f(fixed_str1,error)
+     CALL check("h5tclose_f", error, total_error)
+     
+     CALL h5tclose_f(fixed_str2,error)
+     CALL check("h5tclose_f", error, total_error)
+     data_dims(1) = dimsize
+     !
+     ! Initialize data buffer.
+     !
+     do i = 1, dimsize
+        char_member(i)(1:1) = char(65+i)
+        char_member(i)(2:2) = char(65+i)
+        char_member_out(i)(1:1)   = char(65)
+        char_member_out(i)(2:2)   = char(65)
+        int_member(i)   = i
+        int_member_out(i)   = 0
+        double_member(i)   = 2.* i
+        double_member_out(i)   = 0.
+        real_member(i)   = 3. * i
+        real_member_out(i)   = 0.
+     enddo
+
+     !
+     ! Set dataset transfer property to preserve partially initialized fields
+     ! during write/read to/from dataset with compound datatype.
+     !
+     CALL h5pcreate_f(H5P_DATASET_XFER_F, plist_id, error)
+     CALL check("h5pcreate_f", error, total_error)
+     CALL h5pset_preserve_f(plist_id, flag, error)
+     CALL check("h5pset_preserve_f", error, total_error)
+     !
+     ! Create a new file using default properties.
+     !
+      CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error)
+          if (error .ne. 0) then
+              write(*,*) "Cannot modify filename"
+              stop
+          endif
+     CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error)
+     CALL check("h5fcreate_f", error, total_error)
+
+     !
+     ! Create the dataspace.
+     !
+     CALL h5screate_simple_f(rank, dims, dspace_id, error)
+     CALL check("h5screate_simple_f", error, total_error)
+     !
+     ! Create compound datatype.
+     !
+     ! First calculate total size by calculating sizes of each member
+     !
+     CALL h5tcopy_f(H5T_NATIVE_CHARACTER, dt5_id, error)
+     CALL check("h5tcopy_f", error, total_error)
+     sizechar = 2
+     CALL h5tset_size_f(dt5_id, sizechar, error)
+     CALL check("h5tset_size_f", error, total_error)
+     CALL h5tget_size_f(dt5_id, type_sizec, error)
+     CALL check("h5tget_size_f", error, total_error)
+     CALL h5tget_size_f(H5T_NATIVE_INTEGER, type_sizei, error)
+     CALL check("h5tget_size_f", error, total_error)
+     CALL h5tget_size_f(H5T_NATIVE_DOUBLE, type_sized, error)
+     CALL check("h5tget_size_f", error, total_error)
+     CALL h5tget_size_f(H5T_NATIVE_REAL, type_sizer, error)
+     CALL check("h5tget_size_f", error, total_error)
+     !write(*,*) "get sizes", type_sizec, type_sizei, type_sizer, type_sized
+     type_size = type_sizec + type_sizei + type_sized + type_sizer
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_size, dtype_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     !
+     ! Insert memebers
+     !
+     ! CHARACTER*2 memeber
+     !
+     offset = 0
+     CALL h5tinsert_f(dtype_id, "char_field", offset, dt5_id, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     ! INTEGER member
+     !
+     offset = offset + type_sizec ! Offset of the second memeber is 2
+     CALL h5tinsert_f(dtype_id, "integer_field", offset, H5T_NATIVE_INTEGER, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     ! DOUBLE PRECISION member
+     !
+     offset = offset + type_sizei  ! Offset of the third memeber is 6
+     CALL h5tinsert_f(dtype_id, "double_field", offset, H5T_NATIVE_DOUBLE, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     ! REAL member
+     !
+     offset = offset + type_sized  ! Offset of the last member is 14
+     CALL h5tinsert_f(dtype_id, "real_field", offset, H5T_NATIVE_REAL, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     ! Create the dataset with compound datatype.
+     !
+     CALL h5dcreate_f(file_id, dsetname, dtype_id, dspace_id, &
+                      dset_id, error)
+     CALL check("h5dcreate_f", error, total_error)
+     !
+     ! Create memory types. We have to create a compound datatype
+     ! for each member we want to write.
+     !
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_sizec, dt1_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     offset = 0
+     CALL h5tinsert_f(dt1_id, "char_field", offset, dt5_id, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_sizei, dt2_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     offset = 0
+     CALL h5tinsert_f(dt2_id, "integer_field", offset, H5T_NATIVE_INTEGER, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_sized, dt3_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     offset = 0
+     CALL h5tinsert_f(dt3_id, "double_field", offset, H5T_NATIVE_DOUBLE, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_sizer, dt4_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     offset = 0
+     CALL h5tinsert_f(dt4_id, "real_field", offset, H5T_NATIVE_REAL, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     ! Write data by fields in the datatype. Fields order is not important.
+     !
+     CALL h5dwrite_f(dset_id, dt4_id, real_member, data_dims, error, xfer_prp = plist_id)
+     CALL check("h5dwrite_f", error, total_error)
+     CALL h5dwrite_f(dset_id, dt1_id, char_member, data_dims, error, xfer_prp = plist_id)
+     CALL check("h5dwrite_f", error, total_error)
+     CALL h5dwrite_f(dset_id, dt3_id, double_member, data_dims, error, xfer_prp = plist_id)
+     CALL check("h5dwrite_f", error, total_error)
+     CALL h5dwrite_f(dset_id, dt2_id, int_member, data_dims, error, xfer_prp = plist_id)
+     CALL check("h5dwrite_f", error, total_error)
+
+     !
+     ! End access to the dataset and release resources used by it.
+     !
+     CALL h5dclose_f(dset_id, error)
+     CALL check("h5dclose_f", error, total_error)
+
+     !
+     ! Terminate access to the data space.
+     !
+     CALL h5sclose_f(dspace_id, error)
+     CALL check("h5sclose_f", error, total_error)
+     !
+     ! Terminate access to the datatype
+     !
+     CALL h5tclose_f(dtype_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5tclose_f(dt1_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5tclose_f(dt2_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5tclose_f(dt3_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5tclose_f(dt4_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     !
+     ! Create and store compound datatype with the character and
+     ! array members.
+     !
+     type_size = type_sizec + elements*type_sizer ! Size of compound datatype
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_size, dtarray_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     offset = 0
+     CALL h5tinsert_f(dtarray_id, "char_field", offset, H5T_NATIVE_CHARACTER, error)
+     CALL check("h5tinsert_f", error, total_error)
+     offset = type_sizec
+     CALL h5tarray_create_f(H5T_NATIVE_REAL, array_dims_range, array_dims, arrayt_id, error)
+     CALL check("h5tarray_create_f", error, total_error)
+     CALL h5tinsert_f(dtarray_id,"array_field", offset, arrayt_id, error)
+     CALL check("h5tinsert_f", error, total_error)
+     CALL h5tcommit_f(file_id, "Compound_with_array_member", dtarray_id, error)
+     CALL check("h5tcommit_f", error, total_error)
+     CALL h5tclose_f(arrayt_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5tclose_f(dtarray_id, error)
+     CALL check("h5tclose_f", error, total_error)
+
+     !
+     ! Close the file.
+     !
+     CALL h5fclose_f(file_id, error)
+     CALL check("h5fclose_f", error, total_error)
+
+     !
+     ! Open the file.
+     !
+     CALL h5fopen_f (fix_filename, H5F_ACC_RDWR_F, file_id, error)
+     CALL check("h5fopen_f", error, total_error)
+     !
+     ! Open the dataset.
+     !
+     CALL h5dopen_f(file_id, dsetname, dset_id, error)
+     CALL check("h5dopen_f", error, total_error)
+     !
+     ! Get datatype of the open dataset.
+     ! Check it class, number of members,  and member's names.
+     !
+     CALL h5dget_type_f(dset_id, dtype_id, error)
+     CALL check("h5dget_type_f", error, total_error)
+     CALL h5tget_class_f(dtype_id, class, error)
+     CALL check("h5dget_class_f", error, total_error)
+         if (class .ne. H5T_COMPOUND_F) then
+            write(*,*) " Wrong class type returned"
+            total_error = total_error + 1
+         endif
+     CALL h5tget_nmembers_f(dtype_id, num_members, error)
+     CALL check("h5dget_nmembers_f", error, total_error)
+         if (num_members .ne. COMP_NUM_MEMBERS ) then
+            write(*,*) " Wrong number of members returned"
+            total_error = total_error + 1
+         endif
+     !
+     !  Go through the members and find out their names and offsets.
+     !  Also see if name corresponds to the index
+     !
+     do i = 1, num_members
+        CALL h5tget_member_name_f(dtype_id, i-1, member_name, len, error)
+     CALL check("h5tget_member_name_f", error, total_error)
+        CALL h5tget_member_offset_f(dtype_id, i-1, offset_out, error)
+     CALL check("h5tget_member_offset_f", error, total_error)
+        CALL h5tget_member_index_f(dtype_id, member_name(1:len), member_index, error)
+     CALL check("h5tget_member_index_f", error, total_error)
+         if(member_index .ne. i-1) then
+            write(*,*) "Index returned is incorrect"
+            write(*,*) member_index, i-1
+            total_error = total_error + 1
+            endif
+
+        CHECK_NAME: SELECT CASE (member_name(1:len))
+        CASE("char_field")
+             if(offset_out .ne. 0) then
+               write(*,*) "Offset of the char member is incorrect"
+               total_error = total_error + 1
+             endif
+         CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error)
+          CALL check("h5tget_member_type_f", error, total_error)
+         CALL h5tequal_f(membtype_id, dt5_id, flag, error)
+          CALL check("h5tequal_f", error, total_error)
+             if(.not. flag) then
+                write(*,*) "Wrong member type returned for character member"
+                total_error = total_error + 1
+             endif
+         CALL h5tget_member_class_f(dtype_id, i-1, class, error)
+          CALL check("h5tget_member_class_f",error, total_error)
+              if (class .ne. H5T_STRING_F) then
+                 write(*,*) "Wrong class returned for character member"
+                 total_error = total_error + 1
+              endif
+        CASE("integer_field")
+             if(offset_out .ne. type_sizec) then
+               write(*,*) "Offset of the integer member is incorrect"
+               total_error = total_error + 1
+             endif
+         CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error)
+          CALL check("h5tget_member_type_f", error, total_error)
+         CALL h5tequal_f(membtype_id, H5T_NATIVE_INTEGER, flag, error)
+          CALL check("h5tequal_f", error, total_error)
+             if(.not. flag) then
+                write(*,*) "Wrong member type returned for integer memebr"
+                total_error = total_error + 1
+             endif
+         CALL h5tget_member_class_f(dtype_id, i-1, class, error)
+          CALL check("h5tget_member_class_f",error, total_error)
+              if (class .ne. H5T_INTEGER_F) then
+                 write(*,*) "Wrong class returned for INTEGER member"
+                 total_error = total_error + 1
+              endif
+        CASE("double_field")
+             if(offset_out .ne. (type_sizec+type_sizei)) then
+               write(*,*) "Offset of the double precision member is incorrect"
+               total_error = total_error + 1
+             endif
+         CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error)
+          CALL check("h5tget_member_type_f", error, total_error)
+         CALL h5tequal_f(membtype_id, H5T_NATIVE_DOUBLE, flag, error)
+          CALL check("h5tequal_f", error, total_error)
+             if(.not. flag) then
+                write(*,*) "Wrong member type returned for double precision memebr"
+                total_error = total_error + 1
+             endif
+         CALL h5tget_member_class_f(dtype_id, i-1, class, error)
+          CALL check("h5tget_member_class_f",error, total_error)
+              if (class .ne. H5T_FLOAT_F) then
+                 write(*,*) "Wrong class returned for double precision member"
+                 total_error = total_error + 1
+              endif
+        CASE("real_field")
+             if(offset_out .ne. (type_sizec+type_sizei+type_sized)) then
+               write(*,*) "Offset of the real member is incorrect"
+               total_error = total_error + 1
+             endif
+         CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error)
+          CALL check("h5tget_member_type_f", error, total_error)
+         CALL h5tequal_f(membtype_id, H5T_NATIVE_REAL, flag, error)
+          CALL check("h5tequal_f", error, total_error)
+             if(.not. flag) then
+                write(*,*) "Wrong member type returned for real memebr"
+                total_error = total_error + 1
+             endif
+         CALL h5tget_member_class_f(dtype_id, i-1, class, error)
+          CALL check("h5tget_member_class_f",error, total_error)
+              if (class .ne. H5T_FLOAT_F) then
+                 write(*,*) "Wrong class returned for real member"
+                 total_error = total_error + 1
+              endif
+        CASE DEFAULT
+               write(*,*) "Wrong member's name"
+               total_error = total_error + 1
+
+        END SELECT CHECK_NAME
+
+     enddo
+     !
+     ! Create memory datatype to read character member of the compound datatype.
+     !
+     CALL h5tcopy_f(H5T_NATIVE_CHARACTER, dt2_id, error)
+     CALL check("h5tcopy_f", error, total_error)
+     sizechar = 2
+     CALL h5tset_size_f(dt2_id, sizechar, error)
+     CALL check("h5tset_size_f", error, total_error)
+     CALL h5tget_size_f(dt2_id, type_size, error)
+     CALL check("h5tget_size_f", error, total_error)
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_size, dt1_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     offset = 0
+     CALL h5tinsert_f(dt1_id, "char_field", offset, dt2_id, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     ! Read part of the dataset
+     !
+     CALL h5dread_f(dset_id, dt1_id, char_member_out, data_dims, error)
+     CALL check("h5dread_f", error, total_error)
+         do i = 1, dimsize
+            if (char_member_out(i) .ne. char_member(i)) then
+                write(*,*) " Wrong character data is read back "
+                total_error = total_error + 1
+            endif
+         enddo
+     !
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_sizei, dt5_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     offset = 0
+     CALL h5tinsert_f(dt5_id, "integer_field", offset, H5T_NATIVE_INTEGER, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     ! Read part of the dataset
+     !
+     CALL h5dread_f(dset_id, dt5_id, int_member_out, data_dims, error)
+     CALL check("h5dread_f", error, total_error)
+         do i = 1, dimsize
+            if (int_member_out(i) .ne. int_member(i)) then
+                write(*,*) " Wrong integer data is read back "
+                total_error = total_error + 1
+            endif
+         enddo
+     !
+     !
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_sized, dt3_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     offset = 0
+     CALL h5tinsert_f(dt3_id, "double_field", offset, H5T_NATIVE_DOUBLE, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     ! Read part of the dataset
+     !
+     CALL h5dread_f(dset_id, dt3_id, double_member_out, data_dims, error)
+     CALL check("h5dread_f", error, total_error)
+     DO i = 1, dimsize
+        CALL VERIFY("h5dread_f:Wrong double precision data is read back", double_member_out(i), double_member(i), total_error)   
+     ENDDO
+     !
+     !
+     CALL h5tcreate_f(H5T_COMPOUND_F, type_sizer, dt4_id, error)
+     CALL check("h5tcreate_f", error, total_error)
+     offset = 0
+     CALL h5tinsert_f(dt4_id, "real_field", offset, H5T_NATIVE_REAL, error)
+     CALL check("h5tinsert_f", error, total_error)
+     !
+     ! Read part of the dataset
+     !
+     CALL h5dread_f(dset_id, dt4_id, real_member_out, data_dims, error)
+     CALL check("h5dread_f", error, total_error)
+     DO i = 1, dimsize
+        CALL VERIFY("h5dread_f:Wrong double precision data is read back", real_member_out(i), real_member(i), total_error)   
+     ENDDO
+     !
+     ! *-----------------------------------------------------------------------
+     ! * Test encoding and decoding compound datatypes
+     ! *-----------------------------------------------------------------------
+     !
+     !     Encode compound type in a buffer 
+     !         -- First find the buffer size
+
+     CALL H5Tencode_f(dtype_id, cmpd_buf, cmpd_buf_size, error)
+     CALL check("H5Tencode_f", error, total_error)
+
+     !  Try decoding bogus buffer 
+
+     CALL H5Tdecode_f(cmpd_buf, decoded_tid1, error)
+     CALL verify("H5Tdecode_f", error, -1, total_error)
+
+     CALL H5Tencode_f(dtype_id, cmpd_buf, cmpd_buf_size, error)
+     CALL check("H5Tencode_f", error, total_error)
+
+     !  Decode from the compound buffer and return an object handle 
+     CALL H5Tdecode_f(cmpd_buf, decoded_tid1, error)
+     CALL check("H5Tdecode_f", error, total_error)
+
+     !  Verify that the datatype was copied exactly 
+
+     CALL H5Tequal_f(decoded_tid1, dtype_id, flag, error)
+     CALL check("H5Tequal_f", error, total_error)
+     CALL verify("H5Tequal_f", flag, .TRUE., total_error)
+     !
+     ! Close all open objects.
+     !
+     CALL h5dclose_f(dset_id, error)
+     CALL check("h5dclose_f", error, total_error)
+     CALL h5tclose_f(dt1_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5tclose_f(dt2_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5tclose_f(dt3_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5tclose_f(dt4_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5tclose_f(dt5_id, error)
+     CALL check("h5tclose_f", error, total_error)
+     CALL h5fclose_f(file_id, error)
+     CALL check("h5fclose_f", error, total_error)
+
+     IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error)
+     CALL check("h5_cleanup_f", error, total_error)
+     RETURN
+     END SUBROUTINE compoundtest
+
+
+
+
+    SUBROUTINE basic_data_type_test(total_error)
+
+!   This subroutine tests following functionalities:
+!   H5tget_precision_f, H5tset_precision_f, H5tget_offset_f
+!   H5tset_offset_f, H5tget_pad_f, H5tset_pad_f, H5tget_sign_f,
+!   H5tset_sign_f, H5tget_ebias_f,H5tset_ebias_f, H5tget_norm_f,
+!   H5tset_norm_f, H5tget_inpad_f, H5tset_inpad_f, H5tget_cset_f,
+!   H5tset_cset_f, H5tget_strpad_f, H5tset_strpad_f
+
+     IMPLICIT NONE
+     INTEGER, INTENT(OUT) :: total_error
+
+     INTEGER(HID_T) :: dtype1_id, dtype2_id, dtype3_id, dtype4_id, dtype5_id
+                                     ! datatype identifiers
+     INTEGER(SIZE_T) :: precision ! Datatype precision
+     INTEGER(SIZE_T) :: setprecision ! Datatype precision
+     INTEGER(SIZE_T) :: offset ! Datatype offset
+     INTEGER(SIZE_T) :: setoffset ! Datatype offset
+     INTEGER :: lsbpad !padding type of the least significant bit
+     INTEGER :: msbpad !padding type of the most significant bit
+     INTEGER :: sign !sign type for an integer type
+     INTEGER(SIZE_T) :: ebias1 !Datatype exponent bias of a floating-point type
+     INTEGER(SIZE_T) :: ebias2 !Datatype exponent bias of a floating-point type
+     INTEGER(SIZE_T) :: setebias
+     INTEGER :: norm   !mantissa normalization of a floating-point datatype
+     INTEGER :: inpad   !padding type for unused bits in floating-point datatypes.
+     INTEGER :: cset   !character set type of a string datatype
+     INTEGER :: strpad !string padding method for a string datatype
+     INTEGER :: error !error flag
+
+
+     !
+     ! Create a datatype
+     !
+     CALL h5tcopy_f(H5T_STD_U16BE, dtype1_id, error)
+     CALL check("h5tcopy_f",error,total_error)
+     !
+     !datatype type_id should be modifiable after h5tcopy_f
+     !
+     setprecision = 12
+     CALL h5tset_precision_f(dtype1_id, setprecision, error)
+     CALL check("h5set_precision_f",error,total_error)
+     CALL h5tget_precision_f(dtype1_id,precision, error)
+     CALL check("h5get_precision_f",error,total_error)
+     if(precision .ne. 12) then
+         write (*,*) "got precision is not correct"
+         total_error = total_error + 1
+     end if
+
+     CALL h5tcopy_f(H5T_STD_I32LE, dtype2_id, error)
+     CALL check("h5tcopy_f",error,total_error)
+     setprecision = 12
+     CALL h5tset_precision_f(dtype2_id, setprecision, error)
+     CALL check("h5set_precision_f",error,total_error)
+
+     setoffset = 2
+     CALL h5tset_offset_f(dtype1_id, setoffset, error)
+     CALL check("h5set_offset_f",error,total_error)
+     setoffset = 10
+     CALL h5tset_offset_f(dtype2_id, setoffset, error)
+     CALL check("h5set_offset_f",error,total_error)
+     CALL h5tget_offset_f(dtype2_id,offset, error)
+     CALL check("h5get_offset_f",error,total_error)
+     if(offset .ne. 10) then
+         write (*,*) "got offset is not correct"
+         total_error = total_error + 1
+     end if
+
+     CALL h5tset_pad_f(dtype2_id,H5T_PAD_ONE_F, H5T_PAD_ONE_F, error)
+     CALL check("h5set_pad_f",error,total_error)
+     CALL h5tget_pad_f(dtype2_id,lsbpad,msbpad, error)
+     CALL check("h5get_pad_f",error,total_error)
+     if((lsbpad .ne. H5T_PAD_ONE_F) .and. (msbpad .ne. H5T_PAD_ONE_F)) then
+         write (*,*) "got pad is not correct"
+         total_error = total_error + 1
+     end if
+
+!     CALL h5tset_sign_f(dtype2_id,H5T_SGN_2_F, error)
+!     CALL check("h5set_sign_f",error,total_error)
+!     CALL h5tget_sign_f(dtype2_id,sign, error)
+     CALL h5tget_sign_f(H5T_NATIVE_INTEGER, sign, error)
+     CALL check("h5tget_sign_f",error,total_error)
+     if(sign .ne. H5T_SGN_2_F ) then
+         write (*,*) "got sign is not correct"
+         total_error = total_error + 1
+     end if
+
+     CALL h5tcopy_f(H5T_IEEE_F64BE, dtype3_id, error)
+     CALL check("h5tcopy_f",error,total_error)
+     CALL h5tcopy_f(H5T_IEEE_F32LE, dtype4_id, error)
+     CALL check("h5tcopy_f",error,total_error)
+
+     setebias = 257
+     CALL h5tset_ebias_f(dtype3_id, setebias, error)
+     CALL check("h5tset_ebias_f",error,total_error)
+     setebias = 1
+     CALL h5tset_ebias_f(dtype4_id, setebias, error)
+     CALL check("h5tset_ebias_f",error,total_error)
+     CALL h5tget_ebias_f(dtype3_id, ebias1, error)
+     CALL check("h5tget_ebias_f",error,total_error)
+     if(ebias1 .ne. 257 ) then
+         write (*,*) "got ebias is not correct"
+         total_error = total_error + 1
+     end if
+     CALL h5tget_ebias_f(dtype4_id, ebias2, error)
+     CALL check("h5tget_ebias_f",error,total_error)
+     if(ebias2 .ne. 1 ) then
+         write (*,*) "got ebias is not correct"
+         total_error = total_error + 1
+     end if
+
+     !attention:
+     !It seems that I can't use H5T_NORM_IMPLIED_F to set the norm value
+     !because I got error for the get_norm function
+!     CALL h5tset_norm_f(dtype3_id,H5T_NORM_IMPLIED_F , error)
+!     CALL check("h5tset_norm_f",error,total_error)
+!     CALL h5tget_norm_f(dtype3_id, norm, error)
+!     CALL check("h5tget_norm_f",error,total_error)
+!     if(norm .ne. H5T_NORM_IMPLIED_F ) then
+!         write (*,*) "got norm is not correct"
+!         total_error = total_error + 1
+!     end if
+     CALL h5tset_norm_f(dtype3_id, H5T_NORM_MSBSET_F , error)
+     CALL check("h5tset_norm_f",error,total_error)
+     CALL h5tget_norm_f(dtype3_id, norm, error)
+     CALL check("h5tget_norm_f",error,total_error)
+     if(norm .ne. H5T_NORM_MSBSET_F ) then
+         write (*,*) "got norm is not correct"
+         total_error = total_error + 1
+     end if
+
+     CALL h5tset_norm_f(dtype3_id, H5T_NORM_NONE_F , error)
+     CALL check("h5tset_norm_f",error,total_error)
+     CALL h5tget_norm_f(dtype3_id, norm, error)
+     CALL check("h5tget_norm_f",error,total_error)
+     if(norm .ne. H5T_NORM_NONE_F ) then
+         write (*,*) "got norm is not correct"
+         total_error = total_error + 1
+    end if
+
+     CALL h5tset_inpad_f(dtype3_id, H5T_PAD_ZERO_F , error)
+     CALL check("h5tset_inpad_f",error,total_error)
+     CALL h5tget_inpad_f(dtype3_id, inpad , error)
+     CALL check("h5tget_inpad_f",error,total_error)
+     if(inpad .ne. H5T_PAD_ZERO_F ) then
+         write (*,*) "got inpad is not correct"
+         total_error = total_error + 1
+     end if
+
+     CALL h5tset_inpad_f(dtype3_id,H5T_PAD_ONE_F  , error)
+     CALL check("h5tset_inpad_f",error,total_error)
+     CALL h5tget_inpad_f(dtype3_id, inpad , error)
+     CALL check("h5tget_inpad_f",error,total_error)
+     if(inpad .ne. H5T_PAD_ONE_F ) then
+         write (*,*) "got inpad is not correct"
+         total_error = total_error + 1
+     end if
+
+     CALL h5tset_inpad_f(dtype3_id,H5T_PAD_BACKGROUND_F  , error)
+     CALL check("h5tset_inpad_f",error,total_error)
+     CALL h5tget_inpad_f(dtype3_id, inpad , error)
+     CALL check("h5tget_inpad_f",error,total_error)
+     if(inpad .ne. H5T_PAD_BACKGROUND_F ) then
+         write (*,*) "got inpad is not correct"
+         total_error = total_error + 1
+     end if
+
+!     we should not apply h5tset_cset_f to non_character data typemake
+
+!     CALL h5tset_cset_f(dtype4_id, H5T_CSET_ASCII_F, error)
+!     CALL check("h5tset_cset_f",error,total_error)
+!     CALL h5tget_cset_f(dtype4_id, cset, error)
+!     CALL check("h5tget_cset_f",error,total_error)
+!     if(cset .ne. H5T_CSET_ASCII_F ) then
+!         write (*,*) "got cset is not correct"
+!         total_error = total_error + 1
+!     end if
+
+     CALL h5tcopy_f(H5T_NATIVE_CHARACTER, dtype5_id, error)
+     CALL check("h5tcopy_f",error,total_error)
+     CALL h5tset_cset_f(dtype5_id, H5T_CSET_ASCII_F, error)
+     CALL check("h5tset_cset_f",error,total_error)
+     CALL h5tget_cset_f(dtype5_id, cset, error)
+     CALL check("h5tget_cset_f",error,total_error)
+     if(cset .ne. H5T_CSET_ASCII_F ) then
+         write (*,*) "got cset is not correct"
+         total_error = total_error + 1
+     end if
+     CALL h5tset_strpad_f(dtype5_id, H5T_STR_NULLPAD_F, error)
+     CALL check("h5tset_strpad_f",error,total_error)
+     CALL h5tget_strpad_f(dtype5_id, strpad, error)
+     CALL check("h5tget_strpad_f",error,total_error)
+     if(strpad .ne. H5T_STR_NULLPAD_F ) then
+         write (*,*) "got strpad is not correct"
+         total_error = total_error + 1
+     end if
+
+     CALL h5tset_strpad_f(dtype5_id, H5T_STR_SPACEPAD_F, error)
+     CALL check("h5tset_strpad_f",error,total_error)
+     CALL h5tget_strpad_f(dtype5_id, strpad, error)
+     CALL check("h5tget_strpad_f",error,total_error)
+     if(strpad .ne. H5T_STR_SPACEPAD_F ) then
+         write (*,*) "got strpad is not correct"
+         total_error = total_error + 1
+     end if
+
+    CALL h5tclose_f(dtype1_id, error)
+    CALL check("h5tclose_f", error, total_error)
+    CALL h5tclose_f(dtype2_id, error)
+    CALL check("h5tclose_f", error, total_error)
+    CALL h5tclose_f(dtype3_id, error)
+    CALL check("h5tclose_f", error, total_error)
+    CALL h5tclose_f(dtype4_id, error)
+    CALL check("h5tclose_f", error, total_error)
+    CALL h5tclose_f(dtype5_id, error)
+    CALL check("h5tclose_f", error, total_error)
+
+
+     RETURN
+     END SUBROUTINE basic_data_type_test
+
+    SUBROUTINE enumtest(cleanup, total_error)
+
+    USE HDF5
+    USE TH5_MISC
+    IMPLICIT NONE
+
+    LOGICAL, INTENT(IN)  :: cleanup
+    INTEGER, INTENT(OUT) :: total_error
+    CHARACTER(LEN=4), PARAMETER :: filename="enum"
+    CHARACTER(LEN=80) :: fix_filename
+    CHARACTER(LEN=8), PARAMETER :: dsetname="enumdset"
+    CHARACTER(LEN=4)            :: true ="TRUE"
+    CHARACTER(LEN=5)            :: false="FALSE"
+    CHARACTER(LEN=5)            :: mem_name
+
+    INTEGER(HID_T) :: file_id
+    INTEGER(HID_T) :: dset_id
+    INTEGER(HID_T) :: dspace_id
+    INTEGER(HID_T) :: dtype_id, dtype, native_type
+    INTEGER        :: error
+    INTEGER        :: value
+    INTEGER(HSIZE_T), DIMENSION(1) :: dsize
+    INTEGER(SIZE_T) :: buf_size
+    INTEGER, DIMENSION(2) :: data
+    INTEGER(HSIZE_T), DIMENSION(7) :: dims
+    INTEGER :: order1, order2
+!    INTEGER(SIZE_T) :: type_size1, type_size2
+    INTEGER :: class
+
+    dims(1) = 2
+    dsize(1) = 2
+    data(1) = 1
+    data(2) = 0
+     !
+     ! Create a new file using default properties.
+     !
+    CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error)
+    IF (error .NE. 0) THEN
+       WRITE(*,*) "Cannot modify filename"
+       STOP
+    ENDIF
+    CALL h5fcreate_f(fix_filename,H5F_ACC_TRUNC_F,file_id,error)
+    CALL check("h5fcreate_f", error, total_error)
+    !
+    ! Create enumeration datatype with tow values
+    !
+    CALL h5tenum_create_f(H5T_NATIVE_INTEGER,dtype_id,error)
+    CALL check("h5tenum_create_f", error, total_error)
+    CALL h5tenum_insert_f(dtype_id,true,DATA(1),error)
+    CALL check("h5tenum_insert_f", error, total_error)
+    CALL h5tenum_insert_f(dtype_id,false,DATA(2),error)
+    CALL check("h5tenum_insert_f", error, total_error)
+    !
+    ! Create write  and close a dataset with enum datatype
+    !
+    CALL h5screate_simple_f(1,dsize,dspace_id,error)
+    CALL check("h5screate_simple_f", error, total_error)
+    CALL h5dcreate_f(file_id,dsetname,dtype_id,dspace_id,dset_id,error)
+    CALL check("h5dcreate_f", error, total_error)
+    CALL h5dwrite_f(dset_id,dtype_id,DATA,dims,error)
+    CALL check("h5dwrite_f", error, total_error)
+
+    CALL H5Dget_type_f(dset_id, dtype, error)
+    CALL check("H5Dget_type_f", error, total_error)
+
+    CALL H5Tget_native_type_f(dtype, H5T_DIR_ASCEND_F, native_type, error)
+    CALL check("H5Tget_native_type_f",error, total_error)
+
+    ! Verify the datatype retrieved and converted 
+    CALL H5Tget_order_f(native_type, order1, error)
+    CALL check("H5Tget_order_f",error, total_error)
+    CALL H5Tget_order_f(H5T_NATIVE_INTEGER, order2, error)
+    CALL check("H5Tget_order_f",error, total_error)
+    CALL verify("H5Tget_native_type_f",order1, order2, total_error)
+
+    ! this test depends on whether -i8 was specified
+
+!!$    CALL H5Tget_size_f(native_type, type_size1, error)
+!!$    CALL check("H5Tget_size_f",error, total_error)
+!!$    CALL H5Tget_size_f(H5T_STD_I32BE, type_size2, error)
+!!$    CALL check("H5Tget_size_f",error, total_error)
+!!$    CALL verify("H5Tget_native_type_f", INT(type_size1), INT(type_size2), total_error)
+
+    CALL H5Tget_class_f(native_type, class, error)
+    CALL check("H5Tget_class_f",error, total_error)
+    CALL verify("H5Tget_native_type_f", INT(class), INT(H5T_ENUM_F), total_error)
+
+    CALL h5dclose_f(dset_id,error)
+    CALL check("h5dclose_f", error, total_error)
+    CALL h5sclose_f(dspace_id,error)
+    CALL check("h5sclose_f", error, total_error)
+    !
+    ! Get value of "TRUE"
+    !
+    CALL h5tenum_valueof_f(dtype_id, "TRUE", value, error)
+    CALL check("h5tenum_valueof_f", error, total_error)
+    IF (value .NE. 1) THEN
+       WRITE(*,*) " Value of TRUE is not 1, error"
+       total_error = total_error + 1
+    ENDIF
+    !
+    !  Get name of 0
+    !
+    value = 0
+    buf_size = 5
+    CALL h5tenum_nameof_f(dtype_id,  value, buf_size, mem_name, error)
+    CALL check("h5tenum_nameof_f", error, total_error)
+    IF (mem_name .NE. "FALSE") THEN
+       WRITE(*,*) " Wrong name for 0 value"
+       total_error = total_error + 1
+    ENDIF
+
+    CALL h5tclose_f(dtype_id,error)
+    CALL check("h5tclose_f", error, total_error)
+    CALL h5fclose_f(file_id,error)
+    CALL check("h5fclose_f", error, total_error)
+
+    IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error)
+    CALL check("h5_cleanup_f", error, total_error)
+
+    RETURN
+  END SUBROUTINE enumtest
+
+!-------------------------------------------------------------------------
+! * Function:    test_derived_flt
+! *
+! * Purpose:     Tests user-define and query functions of floating-point types.
+! *              test h5tget/set_fields_f.
+! *
+! * Return:      Success:        0
+! *
+! *              Failure:        number of errors
+! *
+! * Fortran Programmer:  M.S. Breitenfeld
+! *                      September 9, 2008
+! *
+! * Modifications:
+! *
+! *-------------------------------------------------------------------------
+! 
+
+SUBROUTINE test_derived_flt(cleanup, total_error)
+
+
+  IMPLICIT NONE
+  LOGICAL, INTENT(IN)  :: cleanup
+  INTEGER, INTENT(OUT) :: total_error
+  INTEGER(hid_t) :: file=-1, tid1=-1, tid2=-1
+  INTEGER(hid_t) :: dxpl_id=-1
+  INTEGER(size_t) :: spos, epos, esize, mpos, msize
+
+  CHARACTER(LEN=15), PARAMETER :: filename="h5t_derived_flt"
+  CHARACTER(LEN=80) :: fix_filename
+
+  INTEGER(SIZE_T) :: precision1, offset1, ebias1, size1
+  INTEGER(SIZE_T) :: precision2, offset2, ebias2, size2
+
+  INTEGER :: error
+
+  ! Create File 
+  CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error)
+  IF (error .NE. 0) THEN
+     WRITE(*,*) "Cannot modify filename"
+     STOP
+  ENDIF
+
+  CALL h5fcreate_f(fix_filename,H5F_ACC_TRUNC_F,file,error)
+  CALL check("h5fcreate_f", error, total_error)
+
+  CALL h5pcreate_f(H5P_DATASET_XFER_F, dxpl_id, error)
+  CALL check("h5pcreate_f", error, total_error)
+
+  CALL h5tcopy_f(H5T_IEEE_F64LE, tid1, error)
+  CALL check("h5tcopy_f",error,total_error)
+
+  CALL h5tcopy_f(H5T_IEEE_F32LE, tid2, error)
+  CALL check("h5tcopy_f",error,total_error)
+
+  !------------------------------------------------------------------------
+  ! *                   1st floating-point type
+  ! * size=7 byte, precision=42 bits, offset=3 bits, mantissa size=31 bits,
+  ! * mantissa position=3, exponent size=10 bits, exponent position=34,
+  ! * exponent bias=511.  It can be illustrated in little-endian order as
+  ! *
+  ! *          6       5       4       3       2       1       0
+  ! *    ???????? ???SEEEE EEEEEEMM MMMMMMMM MMMMMMMM MMMMMMMM MMMMM???
+  ! *
+  ! * To create a new floating-point type, the following properties must be
+  ! * set in the order of
+  ! *   set fields -> set offset -> set precision -> set size.
+  ! * All these properties must be set before the type can function. Other
+  ! * properties can be set anytime.  Derived type size cannot be expanded
+  ! * bigger than original size but can be decreased.  There should be no
+  ! * holes among the significant bits.  Exponent bias usually is set
+  ! * 2^(n-1)-1, where n is the exponent size.
+  ! *-----------------------------------------------------------------------
+
+  CALL H5Tset_fields_f(tid1, INT(44,size_t), INT(34,size_t), INT(10,size_t), &
+       INT(3,size_t), INT(31,size_t), error)
+  CALL check("H5Tset_fields_f",error,total_error)
+
+  CALL H5Tset_offset_f(tid1, INT(3,size_t), error)
+  CALL check("H5Tset_offset_f",error,total_error)
+
+  CALL H5Tset_precision_f(tid1, INT(42,size_t), error)
+  CALL check("H5Tset_precision_f",error,total_error)
+
+  CALL H5Tset_size_f(tid1, INT(7,size_t), error)
+  CALL check("H5Tset_size_f",error,total_error)
+
+  CALL H5Tset_ebias_f(tid1, INT(511,size_t), error)
+  CALL check("H5Tset_ebias_f",error,total_error)
+
+  CALL H5Tset_pad_f(tid1, H5T_PAD_ZERO_F, H5T_PAD_ZERO_F, error)
+  CALL check("H5Tset_pad_f",error,total_error)
+
+  CALL h5tcommit_f(file, "new float type 1", tid1, error)
+  CALL check("h5tcommit_f", error, total_error)
+
+  CALL h5tclose_f(tid1, error)
+  CALL check("h5tclose_f", error, total_error)
+
+  CALL H5Topen_f(file, "new float type 1", tid1, error)
+  CALL check("H5Topen_f", error, total_error)
+
+  CALL H5Tget_fields_f(tid1, spos, epos, esize, mpos, msize, error)
+  CALL check("H5Tget_fields_f", error, total_error)
+
+  IF(spos.NE.44 .OR. epos.NE.34 .OR. esize.NE.10 .OR. mpos.NE.3 .OR. msize.NE.31)THEN
+     CALL verify("H5Tget_fields_f", -1, 0, total_error)
+  ENDIF
+
+  CALL H5Tget_precision_f(tid1, precision1, error)
+  CALL check("H5Tget_precision_f", error, total_error)
+  CALL verify("H5Tget_precision_f", INT(precision1), 42, total_error)
+
+  CALL H5Tget_offset_f(tid1, offset1, error)
+  CALL check("H5Tget_offset_f", error, total_error)
+  CALL verify("H5Tget_offset_f", INT(offset1), 3, total_error)
+
+  CALL H5Tget_size_f(tid1, size1, error)
+  CALL check("H5Tget_size_f", error, total_error)
+  CALL verify("H5Tget_size_f", INT(size1), 7, total_error)
+
+  CALL H5Tget_ebias_f(tid1, ebias1, error)
+  CALL check("H5Tget_ebias_f", error, total_error)
+  CALL verify("H5Tget_ebias_f", INT(ebias1), 511, total_error)
+
+  !--------------------------------------------------------------------------
+  ! *                   2nd floating-point type
+  ! * size=3 byte, precision=24 bits, offset=0 bits, mantissa size=16 bits,
+  ! * mantissa position=0, exponent size=7 bits, exponent position=16, exponent
+  ! * bias=63. It can be illustrated in little-endian order as
+  ! *
+  ! *          2       1       0
+  ! *    SEEEEEEE MMMMMMMM MMMMMMMM
+  ! *--------------------------------------------------------------------------
+
+  CALL H5Tset_fields_f(tid2, INT(23,size_t), INT(16,size_t), INT(7,size_t), &
+       INT(0,size_t), INT(16,size_t), error)
+  CALL check("H5Tset_fields_f",error,total_error)
+
+  CALL H5Tset_offset_f(tid2, INT(0,size_t), error)
+  CALL check("H5Tset_offset_f",error,total_error)
+
+  CALL H5Tset_precision_f(tid2, INT(24,size_t), error)
+  CALL check("H5Tset_precision_f",error,total_error)
+
+  CALL H5Tset_size_f(tid2, INT(3,size_t), error)
+  CALL check("H5Tset_size_f",error,total_error)
+
+  CALL H5Tset_ebias_f(tid2, INT(63,size_t), error)
+  CALL check("H5Tset_ebias_f",error,total_error)
+
+  CALL H5Tset_pad_f(tid2, H5T_PAD_ZERO_F, H5T_PAD_ZERO_F, error)
+  CALL check("H5Tset_pad_f",error,total_error)
+
+  CALL h5tcommit_f(file, "new float type 2", tid2, error)
+  CALL check("h5tcommit_f", error, total_error)
+
+  CALL h5tclose_f(tid2, error)
+  CALL check("h5tclose_f", error, total_error)
+
+  CALL H5Topen_f(file, "new float type 2", tid2, error)
+  CALL check("H5Topen_f", error, total_error)
+
+  CALL H5Tget_fields_f(tid2, spos, epos, esize, mpos, msize, error)
+  CALL check("H5Tget_fields_f", error, total_error)
+
+  IF(spos.NE.23 .OR. epos.NE.16 .OR. esize.NE.7 .OR. mpos.NE.0 .OR. msize.NE.16)THEN
+     CALL verify("H5Tget_fields_f", -1, 0, total_error)
+  ENDIF
+
+  CALL H5Tget_precision_f(tid2, precision2, error)
+  CALL check("H5Tget_precision_f", error, total_error)
+  CALL verify("H5Tget_precision_f", INT(precision2), 24, total_error)
+
+  CALL H5Tget_offset_f(tid2, offset2, error)
+  CALL check("H5Tget_offset_f", error, total_error)
+  CALL verify("H5Tget_offset_f", INT(offset2), 0, total_error)
+
+  CALL H5Tget_size_f(tid2, size2, error)
+  CALL check("H5Tget_size_f", error, total_error)
+  CALL verify("H5Tget_size_f", INT(size2), 3, total_error)
+
+  CALL H5Tget_ebias_f(tid2, ebias2, error)
+  CALL check("H5Tget_ebias_f", error, total_error)
+  CALL verify("H5Tget_ebias_f", INT(ebias2), 63, total_error)
+
+  CALL h5tclose_f(tid1, error)
+  CALL check("h5tclose_f", error, total_error)
+
+  CALL h5tclose_f(tid2, error)
+  CALL check("h5tclose_f", error, total_error)
+
+  CALL H5Pclose_f(dxpl_id, error)
+  CALL check("H5Pclose_f", error, total_error)
+
+  CALL h5fclose_f(file,error)
+  CALL check("h5fclose_f", error, total_error)
+
+  IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error)
+  CALL check("h5_cleanup_f", error, total_error)
+
+END SUBROUTINE test_derived_flt
+
+END MODULE TH5T