[svn-r6622] Purpose:

    Addition

Description:
    Added "h5fc" utility. This is the same as the "h5cc" utility but for
    Fortran. It only handles static libraries since that's the only
    library we build for Fortran.

    Note! I've tested the code on the normal platforms but I haven't
    tested the utility itself.

Platforms tested:
    Arabica (Fortran)
    Modi4 (Fortran & Parallel)
    Burrwhite (Fortran & C++

Misc. update:

4 files changed, 223 insertions, 77 deletions

diff --git a/fortran/configure b/fortran/configure
index d1994cd..9da24ce 100755
--- a/fortran/configure
+++ b/fortran/configure
@@ -8543,60 +8543,6 @@ rm -rf conftest*
     fi
     ;;
 
-  X-mpich)
-                    echo "$as_me:$LINENO: result: mpich" >&5
-echo "${ECHO_T}mpich" >&6
-    { echo "$as_me:$LINENO: WARNING: *** Why aren't you using an mpicc compiler? ***" >&5
-echo "$as_me: WARNING: *** Why aren't you using an mpicc compiler? ***" >&2;}
-
-                        PARALLEL=mpich
-
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-        program conftest
-
-        include 'mpif.h'
-        call mpi_file_open( ierr )
-        end
-EOF
-
-if test -n "fmpich"; then
-  saved_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS -lfmpich"
-fi
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  :
-
-else
-  LDFLAGS="$saved_LDFLAGS"
-  { { echo "$as_me:$LINENO: error: no mpich library" >&5
-echo "$as_me: error: no mpich library" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-cd ..
-rm -rf conftest*
-
-    ;;
-
   *)
     echo "$as_me:$LINENO: result: error" >&5
 echo "${ECHO_T}error" >&6
@@ -8897,7 +8843,7 @@ fi
 
 saved_no_create=$no_create
 no_create=yes
-ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/H5fortran_types.f90 src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile"
+ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/h5fc src/H5fortran_types.f90 src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -9388,6 +9334,7 @@ do
   "config/commence" ) CONFIG_FILES="$CONFIG_FILES config/commence" ;;
   "config/conclude" ) CONFIG_FILES="$CONFIG_FILES config/conclude" ;;
   "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  "src/h5fc" ) CONFIG_FILES="$CONFIG_FILES src/h5fc" ;;
   "src/H5fortran_types.f90" ) CONFIG_FILES="$CONFIG_FILES src/H5fortran_types.f90" ;;
   "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
   "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
@@ -10056,3 +10003,5 @@ no_create=$saved_no_create
 touch ./config/stamp2
 
 test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+chmod 755 src/h5fc
diff --git a/fortran/configure.in b/fortran/configure.in
index e335fe1..423cef7 100644
--- a/fortran/configure.in
+++ b/fortran/configure.in
@@ -691,25 +691,6 @@ case "X-$enable_parallel" in
     fi
     ;;
 
-  X-mpich)
-    dnl For normal mpich installation the compiler, mpicc, should know
-    dnl where the MPI and MPI-IO header files are located and know which
-    dnl extra libraries need to be linked and will supply appropriate
-    dnl flags to the underlying compiler.
-    AC_MSG_RESULT(mpich)
-    AC_MSG_WARN(*** Why aren't you using an mpicc compiler? ***)
-
-    dnl Apparently mpicc isn't installed correctly so configure must
-    dnl search for the header files and libraries. Actually we only
-    dnl have to search for the libraries in order to get the onto the
-    dnl link line, the user will have already told us about the
-    dnl locations. Fail if something is missing.
-    PARALLEL=mpich
-    AC_CHECK_FLIB(fmpich, [
-        include 'mpif.h'
-        call mpi_file_open( ierr )],, AC_MSG_ERROR(no mpich library))
-    ;;
-
   *)
     AC_MSG_RESULT(error)
     AC_MSG_ERROR(\'$enable_parallel\' is not a valid parallel search type)
@@ -920,6 +901,7 @@ AC_CONFIG_FILES([config/depend1
                  config/commence
                  config/conclude
                  Makefile
+                 src/h5fc
                  src/H5fortran_types.f90
                  src/Makefile
                  test/Makefile
@@ -933,3 +915,5 @@ touch ./config/stamp2
 
 dnl Finally the makefiles
 test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+chmod 755 src/h5fc
diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in
index 99b9c8c..4d9ac8d 100644
--- a/fortran/src/Makefile.in
+++ b/fortran/src/Makefile.in
@@ -1,8 +1,17 @@
 ##
-## HDF5 Forgran Library Makefile(.in)
+## HDF5 Fortran Library Makefile(.in)
 ##
-## Copyright (C) 2000 National Center for Supercomputing Applications.
-##		      All rights reserved.
+## Copyright by the Board of Trustees of the University of Illinois.
+## All rights reserved.
+##
+## This file is part of HDF5.  The full HDF5 copyright notice, including
+## terms governing use, modification, and redistribution, is contained in
+## the files COPYING and Copyright.html.  COPYING can be found at the root
+## of the source code distribution tree; Copyright.html can be found at the
+## root level of an installed copy of the electronic HDF5 document set and
+## is linked from the top-level documents page.  It can also be found at
+## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
 ##
 top_srcdir=@top_srcdir@/..
 top_builddir=../..
@@ -23,6 +32,7 @@ DISTCLEAN=H5fortran_types.f90
 
 ## Public header files (to be installed)...
 PUB_HDR=H5pubconf_fortran.h
+PUB_PROGS=h5fc
 
 ## Source and object files for the library
 ADD_PARALLEL_FILES=@ADD_PARALLEL_FILES@
diff --git a/fortran/src/h5fc.in b/fortran/src/h5fc.in
new file mode 100755
index 0000000..cedc0b5
--- /dev/null
+++ b/fortran/src/h5fc.in
@@ -0,0 +1,203 @@
+#! /bin/sh
+##
+## Copyright by the Board of Trustees of the University of Illinois.
+## All rights reserved.
+##
+## This file is part of HDF5.  The full HDF5 copyright notice, including
+## terms governing use, modification, and redistribution, is contained in
+## the files COPYING and Copyright.html.  COPYING can be found at the root
+## of the source code distribution tree; Copyright.html can be found at the
+## root level of an installed copy of the electronic HDF5 document set and
+## is linked from the top-level documents page.  It can also be found at
+## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
+## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+##
+
+############################################################################
+##                                                                        ##
+## Things You May Have to Modify:                                         ##
+##                                                                        ##
+## If the following paths don't point to the place were HDF5 is installed ##
+## on your system (i.e., you received a binary distribution or moved the  ##
+## files from the originally installed directory to another directory)    ##
+## then modify them accordingly to represent the new paths.               ##
+##                                                                        ##
+############################################################################
+prefix="@prefix@"
+exec_prefix="@exec_prefix@"
+libdir="@libdir@"
+includedir="@includedir@"
+
+############################################################################
+##                                                                        ##
+## You shouldn't have to modify anything below this line.                 ##
+##                                                                        ##
+############################################################################
+
+host_os="@host_os@"
+
+prog_name="`basename $0`"
+
+allargs=""
+compile_args=""
+link_args=""
+link_objs=""
+
+do_link="yes"
+do_compile="no"
+dash_o="no"
+dash_c="no"
+get_output_file="no"
+
+SHOW="eval"
+FCBASE="@FC@"
+FLINKERBASE="@FC@"
+LDFLAGS="@LDFLAGS@"
+LIBS="@LIBS@"
+
+FC="${HDF5_FC:-$FCBASE}"
+FLINKER="${HDF5_FLINKER:-$FLINKERBASE}"
+
+usage() {
+  # A wonderfully informative "usage" message.
+  echo "usage: $prog_name [OPTIONS] <compile line>"
+  echo "  OPTIONS:"
+  echo "    -help        This help message."
+  echo "    -echo        Show all the shell commands executed"
+  echo "    -prefix=DIR  Prefix directory to find HDF5 lib/ and include/"
+  echo "                   subdirectories [default: $prefix]"
+  echo "    -show        Show the commands without executing them"
+  echo " "
+  echo "  <compile line>  - the normal compile line options for your compiler."
+  echo "                    $prog_name uses the same compiler you used to compile"
+  echo "                    HDF5. Check with your compiler's man pages for more"
+  echo "                    information on which options are needed."
+  echo " "
+  echo " You can override the compiler and linker to compile your program by"
+  echo " setting the following environment variables accordingly:"
+  echo " "
+  echo "   HDF5_FC                  -  use a different Fortran 90 or 95 compiler"
+  echo "   HDF5_FLINKER             -  use a different linker"
+  echo " "
+  exit 1
+}
+
+if test "$#" = "0"; then
+  # No parameters specified, issue usage statement and exit.
+  usage
+fi
+
+for arg in $@ ; do
+  if test "x$get_output_file" = "xyes"; then
+    link_args="$link_args $arg"
+    output_file="$arg"
+    get_output_file="no"
+    continue
+  fi
+
+  case "$arg" in
+    -c)
+      allargs="$allargs $arg"
+      compile_args="$compile_args $arg"
+
+      if test "x$do_link" = "xyes" -a -n "$output_file"; then
+        compile_args="$compile_args -o $outputfile"
+      fi
+
+      do_link="no"
+      dash_c="yes"
+      ;;
+    -o)
+      allargs="$allargs $arg"
+      dash_o="yes"
+
+      if test "x$dash_c" = "xyes"; then
+        compile_args="$compile_args $arg"
+      else
+        link_args="$link_args $arg"
+        do_link="yes"
+        get_output_file="yes"
+      fi
+      ;;
+    -E|-M)
+      allargs="$allargs $arg"
+      compile_args="$compile_args $arg"
+      dash_c="yes"
+      dash_o="no"
+      ;;
+    -l*)
+      link_args="$link_args $arg"
+      allargs="$allargs $arg"
+      ;;
+    -prefix=*)
+      prefix="`expr "$arg" : '-prefix=\(.*\)'`"
+      ;;
+    -echo)
+      set -x
+      ;;
+    -show)
+      SHOW="echo"
+      ;;
+    -help)
+      usage
+      ;;
+    *\"*)
+      qarg="'"$arg"'"
+      allargs="$allargs $qarg"
+      ;;
+    *\'*)
+      qarg='\"'"$arg"'\"'
+      allargs="$allargs $qarg"
+      ;;
+    *)
+      allargs="$allargs $qarg"
+
+      if test -s "$arg"; then
+        ext=`expr "$arg" : '.*\(\..*\)'`
+
+        if test "x$ext" = "x.c"; then
+          do_compile="yes"
+          compile_args="$compile_args $arg"
+          fname=`basename $arg .c`
+          link_objs="$link_objs $fname.o"
+        elif test "x$ext" = "x.o"; then
+          if test "x$dash_c" = "xyes"; then
+            compile_args="$compile_args $arg"
+          else
+            do_link="yes"
+            link_objs="$link_objs $arg"
+          fi
+        else
+          compile_args="$compile_args $arg"
+          link_args="$link_args $arg"
+        fi
+      else
+        compile_args="$compile_args $arg"
+        link_args="$link_args $arg"
+      fi
+      ;;
+  esac
+done
+
+if test "x$do_compile" = "xyes"; then
+  if test "x$dash_c" != "xyes"; then
+    compile_args="-c $compile_args"
+  fi
+
+  $SHOW $FC $FFLAGS $compile_args
+  status=$?
+
+  if test "$status" != "0"; then
+    exit $status
+  fi
+fi
+
+if test "x$do_link" = "xyes"; then
+  link_args="$link_args ${libdir}/libhdf5_fortran.a ${libdir}/libhdf5.a"
+
+  link_args="$link_args $LIBS"
+  $SHOW $FLINKER $LDFLAGS $link_objs $link_args
+  status=$?
+fi
+
+exit $status