[svn-r23088] Changed Fortran examples to reflect changes in documentation via Barbara;

mainly program name changes. Two new examples added: h5_extend.f90 h5_subset.f90 and
example fileexample.f90 was removed.

Tested: jam (gnu compilers)

17 files changed, 1035 insertions, 672 deletions

diff --git a/fortran/examples/Makefile.am b/fortran/examples/Makefile.am
index 310c4e2..867d891 100644
--- a/fortran/examples/Makefile.am
+++ b/fortran/examples/Makefile.am
@@ -32,14 +32,14 @@ endif
 # We don't tell automake about these programs so that it doesn't try to
 # compile them with the regular fortran compiler.
 
-EXAMPLE_PROG=dsetexample fileexample rwdsetexample attrexample groupexample \
-     grpsexample grpdsetexample hyperslab selectele refobjexample  \
-     refregexample mountexample compound
+EXAMPLE_PROG=h5_crtdat h5_rdwt h5_crtatt h5_crtgrp \
+     h5_crtgrpar h5_crtgrpd h5_extend h5_subset hyperslab selectele \
+     refobjexample refregexample mountexample compound
 
 # List files to be installed here
-INSTALL_FILES=dsetexample.f90 fileexample.f90 rwdsetexample.f90           \
-     attrexample.f90 groupexample.f90 grpsexample.f90 grpdsetexample.f90  \
-     hyperslab.f90 selectele.f90 refobjexample.f90              \
+INSTALL_FILES=h5_crtdat.f90 h5_rdwt.f90 \
+     h5_crtatt.f90 h5_crtgrp.f90 h5_crtgrpar.f90 h5_crtgrpd.f90  \
+     h5_extend.f90 h5_subset.f90 hyperslab.f90 selectele.f90 refobjexample.f90 \
      refregexample.f90 mountexample.f90  compound.f90 ph5example.f90
 INSTALL_SCRIPT_FILES = run-fortran-ex.sh
 
@@ -57,12 +57,12 @@ TEST_SCRIPT=testh5fc.sh
 FORTRAN_API=yes
 
 # Some examples depend on files created by other examples.
-grpdsetexample.chkexe_: grpsexample.chkexe_
+h5_crtgrpd.chkexe_: h5_crtgrpar.chkexe_
 refregexample.chkexe_: refobjexample.chkexe_
-# rwdsetexample and attrexample both modify the same file created by
-# dsetexample. Serialize them.
-rwdsetexample.chkexe_: dsetexample.chkexe_
-attrexample.chkexe_: rwdsetexample.chkexe_
+# h5_rdwt and h5_crtatt both modify the same file created by
+# h5_crtdat. Serialize them.
+h5_rdwt.chkexe_: h5_crtdat.chkexe_
+h5_crtatt.chkexe_: h5_rdwt.chkexe_
 
 # Tell automake how to build examples using h5fc
 # Additional dependencies for the examples are listed below
@@ -84,13 +84,14 @@ EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/fortran
 # an inelegant way of solving the problem.
 # All programs share the same build rule and a dependency on the main hdf5
 # and fortran libraries above.
-dsetexample: dsetexample.f90
-fileexample: fileexample.f90
-rwdsetexample: rwdsetexample.f90
-attrexample: attrexample.f90
-groupexample: groupexample.f90
-grpsexample: grpsexample.f90
-grpdsetexample: grpdsetexample.f90
+h5_crtdat: h5_crtdat.f90
+h5_extend: h5_extend.f90
+h5_subset: h5_subset.f90
+h5_rdwt: h5_rdwt.f90
+h5_crtatt: h5_crtatt.f90
+h5_crtgrp: h5_crtgrp.f90
+h5_crtgrpar: h5_crtgrpar.f90
+h5_crtgrpd: h5_crtgrpd.f90
 hyperslab: hyperslab.f90
 selectele: selectele.f90
 refobjexample: refobjexample.f90
diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in
index 21adf62..a0eb2c4 100644
--- a/fortran/examples/Makefile.in
+++ b/fortran/examples/Makefile.in
@@ -70,7 +70,7 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 	$(srcdir)/run-fortran-ex.sh.in $(srcdir)/testh5fc.sh.in \
 	$(top_srcdir)/bin/mkinstalldirs \
 	$(top_srcdir)/config/commence.am \
@@ -405,17 +405,17 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
 # be run.
 # We don't tell automake about these programs so that it doesn't try to
 # compile them with the regular fortran compiler.
-EXAMPLE_PROG = dsetexample fileexample rwdsetexample attrexample \
-	groupexample grpsexample grpdsetexample hyperslab selectele \
+EXAMPLE_PROG = h5_crtdat h5_rdwt h5_crtatt h5_crtgrp h5_crtgrpar \
+	h5_crtgrpd h5_extend h5_subset hyperslab selectele \
 	refobjexample refregexample mountexample compound \
 	$(am__append_1)
 
 # List files to be installed here
-INSTALL_FILES = dsetexample.f90 fileexample.f90 rwdsetexample.f90 \
-	attrexample.f90 groupexample.f90 grpsexample.f90 \
-	grpdsetexample.f90 hyperslab.f90 selectele.f90 \
-	refobjexample.f90 refregexample.f90 mountexample.f90 \
-	compound.f90 ph5example.f90 $(am__append_2)
+INSTALL_FILES = h5_crtdat.f90 h5_rdwt.f90 h5_crtatt.f90 h5_crtgrp.f90 \
+	h5_crtgrpar.f90 h5_crtgrpd.f90 h5_extend.f90 h5_subset.f90 \
+	hyperslab.f90 selectele.f90 refobjexample.f90 \
+	refregexample.f90 mountexample.f90 compound.f90 ph5example.f90 \
+	$(am__append_2)
 INSTALL_SCRIPT_FILES = run-fortran-ex.sh
 TEST_SCRIPT = testh5fc.sh
 
@@ -668,12 +668,12 @@ help:
 	@$(top_srcdir)/bin/makehelp
 
 # Some examples depend on files created by other examples.
-grpdsetexample.chkexe_: grpsexample.chkexe_
+h5_crtgrpd.chkexe_: h5_crtgrpar.chkexe_
 refregexample.chkexe_: refobjexample.chkexe_
-# rwdsetexample and attrexample both modify the same file created by
-# dsetexample. Serialize them.
-rwdsetexample.chkexe_: dsetexample.chkexe_
-attrexample.chkexe_: rwdsetexample.chkexe_
+# h5_rdwt and h5_crtatt both modify the same file created by
+# h5_crtdat. Serialize them.
+h5_rdwt.chkexe_: h5_crtdat.chkexe_
+h5_crtatt.chkexe_: h5_rdwt.chkexe_
 
 # Tell automake how to build examples using h5fc
 # Additional dependencies for the examples are listed below
@@ -688,13 +688,14 @@ attrexample.chkexe_: rwdsetexample.chkexe_
 # an inelegant way of solving the problem.
 # All programs share the same build rule and a dependency on the main hdf5
 # and fortran libraries above.
-dsetexample: dsetexample.f90
-fileexample: fileexample.f90
-rwdsetexample: rwdsetexample.f90
-attrexample: attrexample.f90
-groupexample: groupexample.f90
-grpsexample: grpsexample.f90
-grpdsetexample: grpdsetexample.f90
+h5_crtdat: h5_crtdat.f90
+h5_extend: h5_extend.f90
+h5_subset: h5_subset.f90
+h5_rdwt: h5_rdwt.f90
+h5_crtatt: h5_crtatt.f90
+h5_crtgrp: h5_crtgrp.f90
+h5_crtgrpar: h5_crtgrpar.f90
+h5_crtgrpd: h5_crtgrpd.f90
 hyperslab: hyperslab.f90
 selectele: selectele.f90
 refobjexample: refobjexample.f90
diff --git a/fortran/examples/attrexample.f90 b/fortran/examples/attrexample.f90
deleted file mode 100644
index ffbeabe..0000000
--- a/fortran/examples/attrexample.f90
+++ /dev/null
@@ -1,117 +0,0 @@
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!   Copyright by The HDF Group.                                               *
-!   Copyright by the Board of Trustees of the University of Illinois.         *
-!   All rights reserved.                                                      *
-!                                                                             *
-!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
-!   terms governing use, modification, and redistribution, is contained in    *
-!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
-!   of the source code distribution tree; Copyright.html can be found at the  *
-!   root level of an installed copy of the electronic HDF5 document set and   *
-!   is linked from the top-level documents page.  It can also be found at     *
-!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
-!   access to either file, you may request a copy from help@hdfgroup.org.     *
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!
-! This example shows how to create and write a dataset attribute.
-! It opens the existing file 'dset.h5', obtains the identifier of
-! the dataset "/dset", defines attribute's dataspace,
-! creates dataset attribute, writes the attribute, and then closes
-! the attribute's dataspace, attribute, dataset, and file.
-
-     PROGRAM ATTREXAMPLE
-
-
-     USE HDF5 ! This module contains all necessary modules
-
-     IMPLICIT NONE
-
-     CHARACTER(LEN=8), PARAMETER :: filename = "dsetf.h5" ! File name
-     CHARACTER(LEN=4), PARAMETER :: dsetname = "dset"     ! Dataset name
-     CHARACTER(LEN=9), PARAMETER :: aname = "attr_long"   ! Attribute name
-
-     INTEGER(HID_T) :: file_id       ! File identifier
-     INTEGER(HID_T) :: dset_id       ! Dataset identifier
-     INTEGER(HID_T) :: attr_id       ! Attribute identifier
-     INTEGER(HID_T) :: aspace_id     ! Attribute Dataspace identifier
-     INTEGER(HID_T) :: atype_id      ! Attribute Dataspace identifier
-     INTEGER(HSIZE_T), DIMENSION(1) :: adims = (/2/) ! Attribute dimension
-     INTEGER     ::   arank = 1                      ! Attribure rank
-     INTEGER(SIZE_T) :: attrlen    ! Length of the attribute string
-
-     CHARACTER(LEN=80), DIMENSION(2) ::  attr_data  ! Attribute data
-
-     INTEGER     ::   error ! Error flag
-     INTEGER(HSIZE_T), DIMENSION(1) :: data_dims
-
-
-     !
-     ! Initialize attribute's data
-     !
-     attr_data(1) = "Dataset character attribute"
-     attr_data(2) = "Some other string here     "
-     attrlen = 80
-     !
-     ! Initialize FORTRAN interface.
-     !
-     CALL h5open_f(error)
-
-     !
-     ! Open an existing file.
-     !
-     CALL h5fopen_f (filename, H5F_ACC_RDWR_F, file_id, error)
-
-     !
-     ! Open an existing dataset.
-     !
-     CALL h5dopen_f(file_id, dsetname, dset_id, error)
-
-     !
-     ! Create scalar data space for the attribute.
-     !
-     CALL h5screate_simple_f(arank, adims, aspace_id, error)
-     !
-     ! Create datatype for the attribute.
-     !
-     CALL h5tcopy_f(H5T_NATIVE_CHARACTER, atype_id, error)
-     CALL h5tset_size_f(atype_id, attrlen, error)
-
-     !
-     ! Create dataset attribute.
-     !
-     CALL h5acreate_f(dset_id, aname, atype_id, aspace_id, &
-                      attr_id, error)
-
-     !
-     ! Write the attribute data.
-     !
-     data_dims(1) = 2
-     CALL h5awrite_f(attr_id, atype_id, attr_data, data_dims, error)
-
-     !
-     ! Close the attribute.
-     !
-     CALL h5aclose_f(attr_id, error)
-
-     !
-     ! Terminate access to the data space.
-     !
-     CALL h5sclose_f(aspace_id, error)
-
-     !
-     ! End access to the dataset and release resources used by it.
-     !
-     CALL h5dclose_f(dset_id, error)
-
-     !
-     ! Close the file.
-     !
-     CALL h5fclose_f(file_id, error)
-
-     !
-     ! Close FORTRAN interface.
-     !
-     CALL h5close_f(error)
-
-     END PROGRAM ATTREXAMPLE
-
diff --git a/fortran/examples/dsetexample.f90 b/fortran/examples/dsetexample.f90
deleted file mode 100644
index 209a516..0000000
--- a/fortran/examples/dsetexample.f90
+++ /dev/null
@@ -1,85 +0,0 @@
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!   Copyright by The HDF Group.                                               *
-!   Copyright by the Board of Trustees of the University of Illinois.         *
-!   All rights reserved.                                                      *
-!                                                                             *
-!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
-!   terms governing use, modification, and redistribution, is contained in    *
-!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
-!   of the source code distribution tree; Copyright.html can be found at the  *
-!   root level of an installed copy of the electronic HDF5 document set and   *
-!   is linked from the top-level documents page.  It can also be found at     *
-!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
-!   access to either file, you may request a copy from help@hdfgroup.org.     *
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!
-!
-! The following example shows how to create an empty dataset.
-! It creates a file called 'dsetf.h5', defines the
-! dataset dataspace, creates a dataset which is a 4x6 integer array,
-! and then closes the dataspace, the dataset, and the file.
-!
-
-     PROGRAM DSETEXAMPLE
-
-     USE HDF5 ! This module contains all necessary modules
-
-     IMPLICIT NONE
-
-     CHARACTER(LEN=8), PARAMETER :: filename = "dsetf.h5" ! File name
-     CHARACTER(LEN=4), PARAMETER :: dsetname = "dset"     ! Dataset name
-
-     INTEGER(HID_T) :: file_id       ! File identifier
-     INTEGER(HID_T) :: dset_id       ! Dataset identifier
-     INTEGER(HID_T) :: dspace_id     ! Dataspace identifier
-
-
-     INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions
-     INTEGER     ::   rank = 2                        ! Dataset rank
-
-     INTEGER     ::   error ! Error flag
-
-     !
-     ! Initialize FORTRAN interface.
-     !
-     CALL h5open_f(error)
-
-     !
-     ! Create a new file using default properties.
-     !
-     CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
-
-     !
-     ! Create the dataspace.
-     !
-     CALL h5screate_simple_f(rank, dims, dspace_id, error)
-
-     !
-     ! Create the dataset with default properties.
-     !
-     CALL h5dcreate_f(file_id, dsetname, H5T_NATIVE_INTEGER, dspace_id, &
-                      dset_id, error)
-
-     !
-     ! End access to the dataset and release resources used by it.
-     !
-     CALL h5dclose_f(dset_id, error)
-
-     !
-     ! Terminate access to the data space.
-     !
-     CALL h5sclose_f(dspace_id, error)
-
-     !
-     ! Close the file.
-     !
-     CALL h5fclose_f(file_id, error)
-
-     !
-     ! Close FORTRAN interface.
-     !
-     CALL h5close_f(error)
-
-     END PROGRAM DSETEXAMPLE
-
-
diff --git a/fortran/examples/fileexample.f90 b/fortran/examples/fileexample.f90
deleted file mode 100644
index 87119d2..0000000
--- a/fortran/examples/fileexample.f90
+++ /dev/null
@@ -1,49 +0,0 @@
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!   Copyright by The HDF Group.                                               *
-!   Copyright by the Board of Trustees of the University of Illinois.         *
-!   All rights reserved.                                                      *
-!                                                                             *
-!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
-!   terms governing use, modification, and redistribution, is contained in    *
-!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
-!   of the source code distribution tree; Copyright.html can be found at the  *
-!   root level of an installed copy of the electronic HDF5 document set and   *
-!   is linked from the top-level documents page.  It can also be found at     *
-!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
-!   access to either file, you may request a copy from help@hdfgroup.org.     *
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!
-!
-! The following example demonstrates how to create and close an HDF5 file.
-! It creates a file called 'file.h5',  and then closes the file.
-!
-
-     PROGRAM FILEEXAMPLE
-
-     USE HDF5 ! This module contains all necessary modules
-
-     IMPLICIT NONE
-
-     CHARACTER(LEN=8), PARAMETER :: filename = "filef.h5" ! File name
-     INTEGER(HID_T) :: file_id                            ! File identifier
-
-     INTEGER     ::   error  ! Error flag
-
-!
-!    Initialize FORTRAN interface.
-!
-     CALL h5open_f (error)
-     !
-     ! Create a new file using default properties.
-     !
-     CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
-
-     !
-     ! Terminate access to the file.
-     !
-     CALL h5fclose_f(file_id, error)
-!
-!    Close FORTRAN interface.
-!
-     CALL h5close_f(error)
-     END PROGRAM FILEEXAMPLE
diff --git a/fortran/examples/grpdsetexample.f90 b/fortran/examples/grpdsetexample.f90
deleted file mode 100644
index 19fc660..0000000
--- a/fortran/examples/grpdsetexample.f90
+++ /dev/null
@@ -1,156 +0,0 @@
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!   Copyright by The HDF Group.                                               *
-!   Copyright by the Board of Trustees of the University of Illinois.         *
-!   All rights reserved.                                                      *
-!                                                                             *
-!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
-!   terms governing use, modification, and redistribution, is contained in    *
-!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
-!   of the source code distribution tree; Copyright.html can be found at the  *
-!   root level of an installed copy of the electronic HDF5 document set and   *
-!   is linked from the top-level documents page.  It can also be found at     *
-!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
-!   access to either file, you may request a copy from help@hdfgroup.org.     *
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!
-!
-! This example shows how to create a dataset in a particular group.
-! It opens the file created in the previous example and creates two datasets.
-! Absolute and relative dataset names are used.
-!
-
-
-     PROGRAM GRPDSETEXAMPLE
-
-     USE HDF5 ! This module contains all necessary modules
-
-     IMPLICIT NONE
-
-     CHARACTER(LEN=10), PARAMETER :: filename = "groupsf.h5" ! File name
-     CHARACTER(LEN=15), PARAMETER :: groupname = "MyGroup/Group_A" ! Group name
-     CHARACTER(LEN=13), PARAMETER :: dsetname1 = "MyGroup/dset1"  ! Dataset name
-     CHARACTER(LEN=5),  PARAMETER :: dsetname2 = "dset2" ! dataset name
-
-     INTEGER(HID_T) :: file_id       ! File identifier
-     INTEGER(HID_T) :: group_id      ! Group identifier
-     INTEGER(HID_T) :: dataset_id    ! Dataset identifier
-     INTEGER(HID_T) :: dataspace_id  ! Data space identifier
-
-     INTEGER     ::  i, j
-     INTEGER     ::   error ! Error flag
-
-     INTEGER, DIMENSION(3,3) :: dset1_data  ! Data arrays
-     INTEGER, DIMENSION(2,10) :: dset2_data !
-
-     INTEGER(HSIZE_T), DIMENSION(2) :: dims1 = (/3,3/) ! Datasets dimensions
-     INTEGER(HSIZE_T), DIMENSION(2) :: dims2 = (/2,10/)!
-     INTEGER(HSIZE_T), DIMENSION(2) :: data_dims
-
-     INTEGER     ::   rank = 2 ! Datasets rank
-
-     !
-     !Initialize dset1_data array
-     !
-     do i = 1, 3
-          do j = 1, 3
-               dset1_data(i,j) = j;
-          end do
-     end do
-
-
-     !
-     !Initialize dset2_data array
-     !
-     do i = 1, 2
-          do j = 1, 10
-               dset2_data(i,j) = j;
-          end do
-     end do
-
-     !
-     ! Initialize FORTRAN interface.
-     !
-     CALL h5open_f(error)
-
-     !
-     ! Open an existing file.
-     !
-     CALL h5fopen_f (filename, H5F_ACC_RDWR_F, file_id, error)
-
-     !
-     ! Create the data space for the first dataset.
-     !
-     CALL h5screate_simple_f(rank, dims1, dataspace_id, error)
-
-     !
-     ! Create a dataset in group "MyGroup" with default properties.
-     !
-     CALL h5dcreate_f(file_id, dsetname1, H5T_NATIVE_INTEGER, dataspace_id, &
-                      dataset_id, error)
-
-     !
-     ! Write the first dataset.
-     !
-     data_dims(1) = 3
-     data_dims(2) = 3
-     CALL h5dwrite_f(dataset_id, H5T_NATIVE_INTEGER, dset1_data, data_dims, error)
-
-     !
-     ! Close the dataspace for the first dataset.
-     !
-     CALL h5sclose_f(dataspace_id, error)
-
-     !
-     ! Close the first dataset.
-     !
-     CALL h5dclose_f(dataset_id, error)
-
-     !
-     ! Open an existing group in the specified file.
-     !
-     CALL h5gopen_f(file_id, groupname, group_id, error)
-
-     !
-     !Create the data space for the second dataset.
-     !
-     CALL h5screate_simple_f(rank, dims2, dataspace_id, error)
-
-     !
-     ! Create the second dataset in group "Group_A" with default properties.
-     !
-     CALL h5dcreate_f(group_id, dsetname2, H5T_NATIVE_INTEGER, dataspace_id, &
-                      dataset_id, error)
-
-     !
-     ! Write the second dataset.
-     !
-     data_dims(1) = 2
-     data_dims(1) = 10
-     CALL h5dwrite_f(dataset_id, H5T_NATIVE_INTEGER, dset2_data, data_dims, error)
-
-     !
-     ! Close the dataspace for the second dataset.
-     !
-     CALL h5sclose_f(dataspace_id, error)
-
-     !
-     ! Close the second dataset.
-     !
-     CALL h5dclose_f(dataset_id, error)
-
-     !
-     ! Close the group.
-     !
-     CALL h5gclose_f(group_id, error)
-
-     !
-     ! Close the file.
-     !
-     CALL h5fclose_f(file_id, error)
-
-     !
-     ! Close FORTRAN interface.
-     !
-     CALL h5close_f(error)
-
-     END PROGRAM GRPDSETEXAMPLE
diff --git a/fortran/examples/grpsexample.f90 b/fortran/examples/grpsexample.f90
deleted file mode 100644
index 0f694e9..0000000
--- a/fortran/examples/grpsexample.f90
+++ /dev/null
@@ -1,83 +0,0 @@
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!   Copyright by The HDF Group.                                               *
-!   Copyright by the Board of Trustees of the University of Illinois.         *
-!   All rights reserved.                                                      *
-!                                                                             *
-!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
-!   terms governing use, modification, and redistribution, is contained in    *
-!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
-!   of the source code distribution tree; Copyright.html can be found at the  *
-!   root level of an installed copy of the electronic HDF5 document set and   *
-!   is linked from the top-level documents page.  It can also be found at     *
-!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
-!   access to either file, you may request a copy from help@hdfgroup.org.     *
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!
-!
-! The following example code shows how to create groups
-! using absolute and relative names. It creates three groups:
-! the first two groups are created using the file identifier and
-! the group absolute names, and the third group is created using
-! a group identifier and the name relative to the specified group.
-!
-
-
-     PROGRAM GRPSEXAMPLE
-
-     USE HDF5 ! This module contains all necessary modules
-
-     IMPLICIT NONE
-
-     CHARACTER(LEN=10), PARAMETER :: filename = "groupsf.h5" ! File name
-     CHARACTER(LEN=8),  PARAMETER :: groupname1 = "/MyGroup" ! Group name
-     CHARACTER(LEN=16), PARAMETER :: groupname2 = "/MyGroup/Group_A"
-                                                             ! Group name
-     CHARACTER(LEN=7),  PARAMETER :: groupname3 = "Group_B"  ! Group name
-
-     INTEGER(HID_T) :: file_id       ! File identifier
-     INTEGER(HID_T) :: group1_id, group2_id, group3_id ! Group identifiers
-
-     INTEGER     ::   error ! Error flag
-     !
-     ! Initialize FORTRAN interface.
-     !
-     CALL h5open_f(error)
-
-     !
-     ! Create a new file using default properties.
-     !
-     CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
-
-     !
-     ! Create group "MyGroup" in the root group using absolute name.
-     !
-     CALL h5gcreate_f(file_id, groupname1, group1_id, error)
-
-     !
-     ! Create group "Group_A" in group "MyGroup" using absolute name.
-     !
-     CALL h5gcreate_f(file_id, groupname2, group2_id, error)
-
-     !
-     ! Create group "Group_B" in group "MyGroup" using relative name.
-     !
-     CALL h5gcreate_f(group1_id, groupname3, group3_id, error)
-
-     !
-     ! Close the groups.
-     !
-     CALL h5gclose_f(group1_id, error)
-     CALL h5gclose_f(group2_id, error)
-     CALL h5gclose_f(group3_id, error)
-
-     !
-     ! Terminate access to the file.
-     !
-     CALL h5fclose_f(file_id, error)
-
-     !
-     ! Close FORTRAN interface.
-     !
-     CALL h5close_f(error)
-
-     END PROGRAM GRPSEXAMPLE
diff --git a/fortran/examples/h5_crtatt.f90 b/fortran/examples/h5_crtatt.f90
new file mode 100644
index 0000000..79bc576
--- /dev/null
+++ b/fortran/examples/h5_crtatt.f90
@@ -0,0 +1,106 @@
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!   Copyright by The HDF Group.                                               *
+!   Copyright by the Board of Trustees of the University of Illinois.         *
+!   All rights reserved.                                                      *
+!                                                                             *
+!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
+!   terms governing use, modification, and redistribution, is contained in    *
+!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
+!   of the source code distribution tree; Copyright.html can be found at the  *
+!   root level of an installed copy of the electronic HDF5 document set and   *
+!   is linked from the top-level documents page.  It can also be found at     *
+!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+!   access to either file, you may request a copy from help@hdfgroup.org.     *
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!
+! This example shows how to create and write a dataset attribute.
+! It opens the existing file 'dset.h5', obtains the identifier of
+! the dataset "/dset", defines attribute's dataspace,
+! creates dataset attribute, writes the attribute, and then closes
+! the attribute's dataspace, attribute, dataset, and file.
+!
+! This example is used in the HDF5 Tutorial.
+
+PROGRAM H5_CRTATT
+
+  USE HDF5 ! This module contains all necessary modules
+
+  IMPLICIT NONE
+
+  CHARACTER(LEN=8), PARAMETER :: filename = "dsetf.h5" ! File name
+  CHARACTER(LEN=4), PARAMETER :: dsetname = "dset"     ! Dataset name
+  CHARACTER(LEN=9), PARAMETER :: aname = "attr_long"   ! Attribute name
+
+  INTEGER(HID_T) :: file_id       ! File identifier
+  INTEGER(HID_T) :: dset_id       ! Dataset identifier
+  INTEGER(HID_T) :: attr_id       ! Attribute identifier
+  INTEGER(HID_T) :: aspace_id     ! Attribute Dataspace identifier
+  INTEGER(HID_T) :: atype_id      ! Attribute Dataspace identifier
+  INTEGER(HSIZE_T), DIMENSION(1) :: adims = (/2/) ! Attribute dimension
+  INTEGER     ::   arank = 1                      ! Attribure rank
+  INTEGER(SIZE_T) :: attrlen    ! Length of the attribute string
+
+  CHARACTER(LEN=80), DIMENSION(2) ::  attr_data  ! Attribute data
+
+  INTEGER     ::   error ! Error flag
+  INTEGER(HSIZE_T), DIMENSION(1) :: data_dims
+
+  !
+  ! Initialize attribute's data
+  !
+  attr_data(1) = "Dataset character attribute"
+  attr_data(2) = "Some other string here     "
+  attrlen = 80
+  !
+  ! Initialize FORTRAN interface.
+  !
+  CALL h5open_f(error)
+  !
+  ! Open an existing file.
+  !
+  CALL h5fopen_f (filename, H5F_ACC_RDWR_F, file_id, error)
+  !
+  ! Open an existing dataset.
+  !
+  CALL h5dopen_f(file_id, dsetname, dset_id, error)
+  !
+  ! Create scalar data space for the attribute.
+  !
+  CALL h5screate_simple_f(arank, adims, aspace_id, error)
+  !
+  ! Create datatype for the attribute.
+  !
+  CALL h5tcopy_f(H5T_NATIVE_CHARACTER, atype_id, error)
+  CALL h5tset_size_f(atype_id, attrlen, error)
+  !
+  ! Create dataset attribute.
+  !
+  CALL h5acreate_f(dset_id, aname, atype_id, aspace_id, attr_id, error)
+  !
+  ! Write the attribute data.
+  !
+  data_dims(1) = 2
+  CALL h5awrite_f(attr_id, atype_id, attr_data, data_dims, error)
+  !
+  ! Close the attribute.
+  !
+  CALL h5aclose_f(attr_id, error)
+  !
+  ! Terminate access to the data space.
+  !
+  CALL h5sclose_f(aspace_id, error)
+  !
+  ! End access to the dataset and release resources used by it.
+  !
+  CALL h5dclose_f(dset_id, error)
+  !
+  ! Close the file.
+  !
+  CALL h5fclose_f(file_id, error)
+  !
+  ! Close FORTRAN interface.
+  !
+  CALL h5close_f(error)
+
+END PROGRAM H5_CRTATT
+
diff --git a/fortran/examples/h5_crtdat.f90 b/fortran/examples/h5_crtdat.f90
new file mode 100644
index 0000000..6e4c3a4
--- /dev/null
+++ b/fortran/examples/h5_crtdat.f90
@@ -0,0 +1,86 @@
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!   Copyright by The HDF Group.                                               *
+!   Copyright by the Board of Trustees of the University of Illinois.         *
+!   All rights reserved.                                                      *
+!                                                                             *
+!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
+!   terms governing use, modification, and redistribution, is contained in    *
+!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
+!   of the source code distribution tree; Copyright.html can be found at the  *
+!   root level of an installed copy of the electronic HDF5 document set and   *
+!   is linked from the top-level documents page.  It can also be found at     *
+!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+!   access to either file, you may request a copy from help@hdfgroup.org.     *
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!
+!
+! The following example shows how to create an empty dataset.
+! It creates a file called 'dsetf.h5', defines the
+! dataset dataspace, creates a dataset which is a 4x6 integer array,
+! and then closes the dataspace, the dataset, and the file.
+!
+! This example is used in the HDF5 Tutorial.
+
+PROGRAM H5_CRTDAT
+
+  USE HDF5 ! This module contains all necessary modules
+
+  IMPLICIT NONE
+
+  CHARACTER(LEN=8), PARAMETER :: filename = "dsetf.h5" ! File name
+  CHARACTER(LEN=4), PARAMETER :: dsetname = "dset"     ! Dataset name
+
+  INTEGER(HID_T) :: file_id       ! File identifier
+  INTEGER(HID_T) :: dset_id       ! Dataset identifier
+  INTEGER(HID_T) :: dspace_id     ! Dataspace identifier
+
+
+  INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions
+  INTEGER     ::   rank = 2                        ! Dataset rank
+
+  INTEGER     ::   error ! Error flag
+
+  !
+  ! Initialize FORTRAN interface.
+  !
+  CALL h5open_f(error)
+
+  !
+  ! Create a new file using default properties.
+  !
+  CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
+
+  !
+  ! Create the dataspace.
+  !
+  CALL h5screate_simple_f(rank, dims, dspace_id, error)
+
+  !
+  ! Create the dataset with default properties.
+  !
+  CALL h5dcreate_f(file_id, dsetname, H5T_NATIVE_INTEGER, dspace_id, &
+       dset_id, error)
+
+  !
+  ! End access to the dataset and release resources used by it.
+  !
+  CALL h5dclose_f(dset_id, error)
+
+  !
+  ! Terminate access to the data space.
+  !
+  CALL h5sclose_f(dspace_id, error)
+
+  !
+  ! Close the file.
+  !
+  CALL h5fclose_f(file_id, error)
+
+  !
+  ! Close FORTRAN interface.
+  !
+  CALL h5close_f(error)
+
+END PROGRAM H5_CRTDAT
+
+
diff --git a/fortran/examples/groupexample.f90 b/fortran/examples/h5_crtgrp.f90
index 91ebc50..278d175 100644
--- a/fortran/examples/groupexample.f90
+++ b/fortran/examples/h5_crtgrp.f90
@@ -18,47 +18,47 @@
 ! It creates a file called 'group.h5', creates a group
 ! called MyGroup in the root group, and then closes the group and file.
 !
+! This example is used in the HDF5 Tutorial.
 
+PROGRAM H5_CRTGRP
 
-     PROGRAM GROUPEXAMPLE
+  USE HDF5 ! This module contains all necessary modules
 
-     USE HDF5 ! This module contains all necessary modules
+  IMPLICIT NONE
 
-     IMPLICIT NONE
+  CHARACTER(LEN=9), PARAMETER :: filename = "groupf.h5" ! File name
+  CHARACTER(LEN=7), PARAMETER :: groupname = "MyGroup"  ! Group name
 
-     CHARACTER(LEN=9), PARAMETER :: filename = "groupf.h5" ! File name
-     CHARACTER(LEN=7), PARAMETER :: groupname = "MyGroup"  ! Group name
+  INTEGER(HID_T) :: file_id       ! File identifier
+  INTEGER(HID_T) :: group_id      ! Group identifier
 
-     INTEGER(HID_T) :: file_id       ! File identifier
-     INTEGER(HID_T) :: group_id      ! Group identifier
+  INTEGER     ::   error ! Error flag
+  !
+  !    Initialize FORTRAN interface.
+  !
+  CALL h5open_f(error)
+  !
+  ! Create a new file using default properties.
+  !
+  CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
 
-     INTEGER     ::   error ! Error flag
-!
-!    Initialize FORTRAN interface.
-!
-     CALL h5open_f(error)
-     !
-     ! Create a new file using default properties.
-     !
-     CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
-
-     !
-     ! Create a group named "/MyGroup" in the file.
-     !
-     CALL h5gcreate_f(file_id, groupname, group_id, error)
+  !
+  ! Create a group named "/MyGroup" in the file.
+  !
+  CALL h5gcreate_f(file_id, groupname, group_id, error)
 
-     !
-     ! Close the group.
-     !
-     CALL h5gclose_f(group_id, error)
+  !
+  ! Close the group.
+  !
+  CALL h5gclose_f(group_id, error)
 
-     !
-     ! Terminate access to the file.
-     !
-     CALL h5fclose_f(file_id, error)
-!
-!    Close FORTRAN interface.
-!
-     CALL h5close_f(error)
+  !
+  ! Terminate access to the file.
+  !
+  CALL h5fclose_f(file_id, error)
+  !
+  !    Close FORTRAN interface.
+  !
+  CALL h5close_f(error)
 
-     END PROGRAM GROUPEXAMPLE
+END PROGRAM H5_CRTGRP
diff --git a/fortran/examples/h5_crtgrpar.f90 b/fortran/examples/h5_crtgrpar.f90
new file mode 100644
index 0000000..4ef008a
--- /dev/null
+++ b/fortran/examples/h5_crtgrpar.f90
@@ -0,0 +1,83 @@
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!   Copyright by The HDF Group.                                               *
+!   Copyright by the Board of Trustees of the University of Illinois.         *
+!   All rights reserved.                                                      *
+!                                                                             *
+!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
+!   terms governing use, modification, and redistribution, is contained in    *
+!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
+!   of the source code distribution tree; Copyright.html can be found at the  *
+!   root level of an installed copy of the electronic HDF5 document set and   *
+!   is linked from the top-level documents page.  It can also be found at     *
+!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+!   access to either file, you may request a copy from help@hdfgroup.org.     *
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!
+!
+! The following example code shows how to create groups
+! using absolute and relative names. It creates three groups:
+! the first two groups are created using the file identifier and
+! the group absolute names, and the third group is created using
+! a group identifier and the name relative to the specified group.
+!
+! This example is used in the HDF5 Tutorial.
+
+PROGRAM H5_CRTGRPAR
+
+  USE HDF5 ! This module contains all necessary modules
+
+  IMPLICIT NONE
+
+  CHARACTER(LEN=10), PARAMETER :: filename = "groupsf.h5" ! File name
+  CHARACTER(LEN=8),  PARAMETER :: groupname1 = "/MyGroup" ! Group name
+  CHARACTER(LEN=16), PARAMETER :: groupname2 = "/MyGroup/Group_A"
+                                                          ! Group name
+  CHARACTER(LEN=7),  PARAMETER :: groupname3 = "Group_B"  ! Group name
+
+  INTEGER(HID_T) :: file_id       ! File identifier
+  INTEGER(HID_T) :: group1_id, group2_id, group3_id ! Group identifiers
+
+  INTEGER     ::   error ! Error flag
+  !
+  ! Initialize FORTRAN interface.
+  !
+  CALL h5open_f(error)
+
+  !
+  ! Create a new file using default properties.
+  !
+  CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
+
+  !
+  ! Create group "MyGroup" in the root group using absolute name.
+  !
+  CALL h5gcreate_f(file_id, groupname1, group1_id, error)
+
+  !
+  ! Create group "Group_A" in group "MyGroup" using absolute name.
+  !
+  CALL h5gcreate_f(file_id, groupname2, group2_id, error)
+
+  !
+  ! Create group "Group_B" in group "MyGroup" using relative name.
+  !
+  CALL h5gcreate_f(group1_id, groupname3, group3_id, error)
+
+  !
+  ! Close the groups.
+  !
+  CALL h5gclose_f(group1_id, error)
+  CALL h5gclose_f(group2_id, error)
+  CALL h5gclose_f(group3_id, error)
+
+  !
+  ! Terminate access to the file.
+  !
+  CALL h5fclose_f(file_id, error)
+
+  !
+  ! Close FORTRAN interface.
+  !
+  CALL h5close_f(error)
+
+END PROGRAM H5_CRTGRPAR
diff --git a/fortran/examples/h5_crtgrpd.f90 b/fortran/examples/h5_crtgrpd.f90
new file mode 100644
index 0000000..d35f03d
--- /dev/null
+++ b/fortran/examples/h5_crtgrpd.f90
@@ -0,0 +1,155 @@
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!   Copyright by The HDF Group.                                               *
+!   Copyright by the Board of Trustees of the University of Illinois.         *
+!   All rights reserved.                                                      *
+!                                                                             *
+!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
+!   terms governing use, modification, and redistribution, is contained in    *
+!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
+!   of the source code distribution tree; Copyright.html can be found at the  *
+!   root level of an installed copy of the electronic HDF5 document set and   *
+!   is linked from the top-level documents page.  It can also be found at     *
+!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+!   access to either file, you may request a copy from help@hdfgroup.org.     *
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!
+!
+! This example shows how to create a dataset in a particular group.
+! It opens the file created in the previous example and creates two datasets.
+! Absolute and relative dataset names are used.
+!
+! This example is used in the HDF5 Tutorial.
+
+PROGRAM H5_CRTGRPD
+
+  USE HDF5 ! This module contains all necessary modules
+
+  IMPLICIT NONE
+
+  CHARACTER(LEN=10), PARAMETER :: filename = "groupsf.h5" ! File name
+  CHARACTER(LEN=15), PARAMETER :: groupname = "MyGroup/Group_A" ! Group name
+  CHARACTER(LEN=13), PARAMETER :: dsetname1 = "MyGroup/dset1"  ! Dataset name
+  CHARACTER(LEN=5),  PARAMETER :: dsetname2 = "dset2" ! dataset name
+
+  INTEGER(HID_T) :: file_id       ! File identifier
+  INTEGER(HID_T) :: group_id      ! Group identifier
+  INTEGER(HID_T) :: dataset_id    ! Dataset identifier
+  INTEGER(HID_T) :: dataspace_id  ! Data space identifier
+
+  INTEGER ::  i, j
+  INTEGER ::   error ! Error flag
+
+  INTEGER, DIMENSION(3,3) :: dset1_data  ! Data arrays
+  INTEGER, DIMENSION(2,10) :: dset2_data !
+
+  INTEGER(HSIZE_T), DIMENSION(2) :: dims1 = (/3,3/) ! Datasets dimensions
+  INTEGER(HSIZE_T), DIMENSION(2) :: dims2 = (/2,10/)!
+  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims
+
+  INTEGER     ::   rank = 2 ! Datasets rank
+
+  !
+  !Initialize dset1_data array
+  !
+  DO i = 1, 3
+     DO j = 1, 3
+        dset1_data(i,j) = j;
+     END DO
+  END DO
+
+  !
+  !Initialize dset2_data array
+  !
+  DO i = 1, 2
+     DO j = 1, 10
+        dset2_data(i,j) = j;
+     END DO
+  END DO
+
+  !
+  ! Initialize FORTRAN interface.
+  !
+  CALL h5open_f(error)
+
+  !
+  ! Open an existing file.
+  !
+  CALL h5fopen_f (filename, H5F_ACC_RDWR_F, file_id, error)
+
+  !
+  ! Create the data space for the first dataset.
+  !
+  CALL h5screate_simple_f(rank, dims1, dataspace_id, error)
+
+  !
+  ! Create a dataset in group "MyGroup" with default properties.
+  !
+  CALL h5dcreate_f(file_id, dsetname1, H5T_NATIVE_INTEGER, dataspace_id, &
+       dataset_id, error)
+
+  !
+  ! Write the first dataset.
+  !
+  data_dims(1) = 3
+  data_dims(2) = 3
+  CALL h5dwrite_f(dataset_id, H5T_NATIVE_INTEGER, dset1_data, data_dims, error)
+
+  !
+  ! Close the dataspace for the first dataset.
+  !
+  CALL h5sclose_f(dataspace_id, error)
+
+  !
+  ! Close the first dataset.
+  !
+  CALL h5dclose_f(dataset_id, error)
+
+  !
+  ! Open an existing group in the specified file.
+  !
+  CALL h5gopen_f(file_id, groupname, group_id, error)
+
+  !
+  !Create the data space for the second dataset.
+  !
+  CALL h5screate_simple_f(rank, dims2, dataspace_id, error)
+
+  !
+  ! Create the second dataset in group "Group_A" with default properties.
+  !
+  CALL h5dcreate_f(group_id, dsetname2, H5T_NATIVE_INTEGER, dataspace_id, &
+       dataset_id, error)
+
+  !
+  ! Write the second dataset.
+  !
+  data_dims(1) = 2
+  data_dims(1) = 10
+  CALL h5dwrite_f(dataset_id, H5T_NATIVE_INTEGER, dset2_data, data_dims, error)
+
+  !
+  ! Close the dataspace for the second dataset.
+  !
+  CALL h5sclose_f(dataspace_id, error)
+
+  !
+  ! Close the second dataset.
+  !
+  CALL h5dclose_f(dataset_id, error)
+
+  !
+  ! Close the group.
+  !
+  CALL h5gclose_f(group_id, error)
+
+  !
+  ! Close the file.
+  !
+  CALL h5fclose_f(file_id, error)
+
+  !
+  ! Close FORTRAN interface.
+  !
+  CALL h5close_f(error)
+
+END PROGRAM H5_CRTGRPD
diff --git a/fortran/examples/h5_extend.f90 b/fortran/examples/h5_extend.f90
new file mode 100644
index 0000000..306d837
--- /dev/null
+++ b/fortran/examples/h5_extend.f90
@@ -0,0 +1,233 @@
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!   Copyright by The HDF Group.                                               *
+!   Copyright by the Board of Trustees of the University of Illinois.         *
+!   All rights reserved.                                                      *
+!                                                                             *
+!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
+!   terms governing use, modification, and redistribution, is contained in    *
+!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
+!   of the source code distribution tree; Copyright.html can be found at the  *
+!   root level of an installed copy of the electronic HDF5 document set and   *
+!   is linked from the top-level documents page.  It can also be found at     *
+!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+!   access to either file, you may request a copy from help@hdfgroup.org.     *
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!
+! This example extends an HDF5 dataset. It is used in the HDF5 Tutorial.
+
+PROGRAM H5_EXTEND
+
+  USE HDF5 ! This module contains all necessary modules 
+
+  IMPLICIT NONE
+
+  !
+  !the dataset is stored in file "extend.h5" 
+  !
+  CHARACTER(LEN=9), PARAMETER :: filename = "extend.h5"
+
+  !
+  !dataset rank is 2 and name is "ExtendibleArray"
+  !
+  CHARACTER(LEN=15), PARAMETER :: dsetname = "ExtendibleArray"
+  INTEGER :: RANK = 2
+
+  INTEGER(HID_T) :: file_id       ! File identifier 
+  INTEGER(HID_T) :: dset_id       ! Dataset identifier 
+  INTEGER(HID_T) :: dataspace     ! Dataspace identifier 
+  INTEGER(HID_T) :: memspace      ! Memory dataspace identifier 
+  INTEGER(HID_T) :: crp_list      ! Dataset creation property identifier 
+
+  !
+  !dataset dimensions at creation time
+  !
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: dims = (/3,3/)
+
+  !
+  !data dimensions 
+  !
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsc = (/2,5/)
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsm = (/3,7/)
+
+  !
+  !Maximum dimensions
+  !
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims 
+
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: offset
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: count 
+
+  !
+  ! Variables for reading and writing 
+  !
+  INTEGER, DIMENSION(1:3,1:3)  :: data1 
+  INTEGER, DIMENSION(1:21) :: data2 = &
+       (/2, 3, 4, 2, 3, 4, 2, 3, 4, 2, 3, 4, 2, 3, 4, 2, 3, 4, 2, 3, 4/)
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: data_dims
+
+  !
+  !Size of data in the file 
+  !
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: size
+
+  !
+  !general purpose integer 
+  !
+  INTEGER :: i, j
+
+  !
+  !flag to check operation success 
+  !
+  INTEGER :: error 
+
+  !
+  !Variables used in reading data back
+  !  
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsr, maxdimsr
+  INTEGER :: rankr
+  INTEGER, DIMENSION(1:3,1:10)  :: rdata 
+
+  !
+  !Initialize FORTRAN predifined datatypes
+  !
+  CALL h5open_f(error) 
+
+  !
+  !Create a new file using default properties.
+  ! 
+  CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
+
+  !
+  !Create the data space with unlimited dimensions.
+  !
+  maxdims = (/H5S_UNLIMITED_F, H5S_UNLIMITED_F/)
+
+  CALL h5screate_simple_f(RANK, dims, dataspace, error, maxdims)
+
+  !
+  !Modify dataset creation properties, i.e. enable chunking
+  !
+  CALL h5pcreate_f(H5P_DATASET_CREATE_F, crp_list, error)
+
+  CALL h5pset_chunk_f(crp_list, RANK, dimsc, error)
+
+  !
+  !Create a dataset with 3X3 dimensions using cparms creation propertie .
+  !
+  CALL h5dcreate_f(file_id, dsetname, H5T_NATIVE_INTEGER, dataspace, &
+       dset_id, error, crp_list )
+  CALL h5sclose_f(dataspace, error)
+
+  !
+  !Fill data array with 1's 
+  !
+  DO i = 1, dims(1)
+     DO j = 1, dims(2)
+        data1(i,j) = 1
+     END DO
+  END DO
+
+  !
+  !Write data array to dataset
+  !
+  data_dims(1:2) = (/3,3/) 
+  CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data1, data_dims, error)
+
+  !
+  !Extend the dataset. Dataset becomes 10 x 3.
+  !
+  size(1:2)   = (/3,10/)
+  CALL h5dextend_f(dset_id, size, error)
+
+  offset(1:2) = (/0,3/)
+  count(1:2)  = (/3,7/)
+
+  CALL h5screate_simple_f (2, dimsm, memspace, error)
+
+  !
+  !Write to 3x7 extended part of dataset
+  !   
+  CALL h5dget_space_f(dset_id, dataspace, error)
+  CALL h5sselect_hyperslab_f(dataspace, H5S_SELECT_SET_F, &
+       offset, count, error)
+
+  data_dims(1:2) = (/3,7/)
+  CALL H5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data2, data_dims, error, &
+       memspace, dataspace)
+
+  !
+  !Close the objects that were opened.
+  !
+  CALL h5sclose_f(dataspace, error)
+  CALL h5pclose_f(crp_list, error)
+  CALL h5dclose_f(dset_id, error)
+  CALL h5fclose_f(file_id, error)
+
+  !
+  !read the data back
+  !
+  !Open the file.
+  !
+  CALL h5fopen_f (filename, H5F_ACC_RDONLY_F, file_id, error)
+
+  !
+  !Open the  dataset.
+  !
+  CALL h5dopen_f(file_id, dsetname, dset_id, error)
+
+  !
+  !Get dataset's dataspace handle.
+  !
+  CALL h5dget_space_f(dset_id, dataspace, error)
+
+  !
+  !Get dataspace's rank.
+  !
+  CALL h5sget_simple_extent_ndims_f(dataspace, rankr, error)
+
+  !
+  !Get dataspace's dimensions.
+  ! 
+  CALL h5sget_simple_extent_dims_f(dataspace, dimsr, maxdimsr, error)
+
+  !
+  !Get creation property list.
+  !
+  CALL h5dget_create_plist_f(dset_id, crp_list, error)
+
+  !
+  ! Fill read buffer with zeroes
+  !
+  rdata(1:dimsr(1),1:dimsr(2)) = 0
+
+  !
+  !create memory dataspace
+  !
+  CALL h5screate_simple_f(rankr, dimsr, memspace, error)
+
+  !
+  !Read data 
+  !
+  data_dims(1:2) = (/3,10/)
+  CALL H5dread_f(dset_id, H5T_NATIVE_INTEGER, rdata, data_dims, &
+       error, memspace, dataspace)
+
+  PRINT *,"Dataset:" 
+  DO i = 1, dimsr(1)
+     PRINT *, rdata(i,1:dimsr(2))    
+  END DO
+
+  !
+  !Close the objects that were opened.
+  !
+  CALL h5sclose_f(dataspace, error)
+  CALL h5sclose_f(memspace, error)
+  CALL h5pclose_f(crp_list, error)
+  CALL h5dclose_f(dset_id, error)
+  CALL h5fclose_f(file_id, error)
+
+  !Close FORTRAN predefined datatypes
+  !
+  CALL h5close_f(error)
+
+END PROGRAM H5_EXTEND
diff --git a/fortran/examples/h5_rdwt.f90 b/fortran/examples/h5_rdwt.f90
new file mode 100644
index 0000000..ba05b2f
--- /dev/null
+++ b/fortran/examples/h5_rdwt.f90
@@ -0,0 +1,96 @@
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!   Copyright by The HDF Group.                                               *
+!   Copyright by the Board of Trustees of the University of Illinois.         *
+!   All rights reserved.                                                      *
+!                                                                             *
+!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
+!   terms governing use, modification, and redistribution, is contained in    *
+!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
+!   of the source code distribution tree; Copyright.html can be found at the  *
+!   root level of an installed copy of the electronic HDF5 document set and   *
+!   is linked from the top-level documents page.  It can also be found at     *
+!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+!   access to either file, you may request a copy from help@hdfgroup.org.     *
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!
+!
+! The following example shows how to write and read to/from an existing dataset.
+! It opens the file created in the previous example, obtains the dataset
+! identifier, writes the data to the dataset in the file,
+! then reads the dataset  to memory.
+!
+! This example is used in the HDF5 Tutorial.
+
+PROGRAM H5_RDWT
+
+  USE HDF5 ! This module contains all necessary modules
+
+  IMPLICIT NONE
+
+  CHARACTER(LEN=8), PARAMETER :: filename = "dsetf.h5" ! File name
+  CHARACTER(LEN=4), PARAMETER :: dsetname = "dset"     ! Dataset name
+
+  INTEGER(HID_T) :: file_id       ! File identifier
+  INTEGER(HID_T) :: dset_id       ! Dataset identifier
+
+  INTEGER     ::   error ! Error flag
+  INTEGER     ::  i, j
+
+  INTEGER, DIMENSION(4,6) :: dset_data, data_out ! Data buffers
+  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims
+
+  !
+  ! Initialize the dset_data array.
+  !
+  DO i = 1, 4
+     DO j = 1, 6
+        dset_data(i,j) = (i-1)*6 + j
+     END DO
+  END DO
+
+  !
+  ! Initialize FORTRAN interface.
+  !
+  CALL h5open_f(error)
+
+  !
+  ! Open an existing file.
+  !
+  CALL h5fopen_f (filename, H5F_ACC_RDWR_F, file_id, error)
+
+  !
+  ! Open an existing dataset.
+  !
+  CALL h5dopen_f(file_id, dsetname, dset_id, error)
+
+  !
+  ! Write the dataset.
+  !
+  data_dims(1) = 4
+  data_dims(2) = 6
+  CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, dset_data, data_dims, error)
+
+  !
+  ! Read the dataset.
+  !
+  CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, data_out, data_dims, error)
+
+  !
+  ! Close the dataset.
+  !
+  CALL h5dclose_f(dset_id, error)
+
+  !
+  ! Close the file.
+  !
+  CALL h5fclose_f(file_id, error)
+
+  !
+  ! Close FORTRAN interface.
+  !
+  CALL h5close_f(error)
+
+END PROGRAM H5_RDWT
+
+
+
diff --git a/fortran/examples/h5_subset.f90 b/fortran/examples/h5_subset.f90
new file mode 100644
index 0000000..a1203d4
--- /dev/null
+++ b/fortran/examples/h5_subset.f90
@@ -0,0 +1,186 @@
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!  Copyright by The HDF Group.                                              *
+!  Copyright by the Board of Trustees of the University of Illinois.        *
+!  All rights reserved.                                                     *
+!                                                                           *
+!  This file is part of HDF5.  The full HDF5 copyright notice, including    *
+!  terms governing use, modification, and redistribution, is contained in   *
+!  the files COPYING and Copyright.html.  COPYING can be found at the root  *
+!  of the source code distribution tree; Copyright.html can be found at the *
+!  root level of an installed copy of the electronic HDF5 document set and  *
+!  is linked from the top-level documents page.  It can also be found at    *
+!  http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have         *
+!  access to either file, you may request a copy from help@hdfgroup.org.    *
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+!
+! This example shows how to write and read a hyperslab.  
+! It is used in the HDF5 Tutorial.
+!
+
+PROGRAM H5_SUBSET 
+
+  USE HDF5 ! This module contains all necessary modules 
+
+  IMPLICIT NONE
+
+  CHARACTER(LEN=9), PARAMETER :: filename = "subset.h5"  ! File name
+  CHARACTER(LEN=8), PARAMETER :: dsetname = "IntArray"   ! Dataset name
+
+  INTEGER(HID_T) :: file_id       ! File identifier 
+  INTEGER(HID_T) :: dset_id       ! Dataset identifier 
+  INTEGER(HID_T) :: dataspace     ! Dataspace identifier 
+  INTEGER(HID_T) :: memspace      ! memspace identifier 
+
+  !
+  ! To change the subset size, modify size of dimsm, sdata, dim0_sub,
+  ! dim1_sub, and count
+  !
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsm = (/4,3/) ! Dataset dimensions
+  INTEGER, DIMENSION(1:4,1:3) :: sdata                  ! Subset buffer
+  INTEGER :: dim0_sub = 4   
+  INTEGER :: dim1_sub = 3 
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: count = (/4,3/)  ! Size of hyperslab
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: offset = (/2,1/) ! Hyperslab offset
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: stride = (/1,1/) ! Hyperslab stride 
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: block = (/1,1/)  ! Hyperslab block size 
+
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsf = (/10,8/) ! Dataset dimensions
+
+
+  INTEGER, DIMENSION(1:10,1:8) :: data     ! Data to write
+  INTEGER, DIMENSION(1:10,1:8) :: rdata    ! Data to read 
+
+  INTEGER :: rank = 2      ! Dataset rank ( in file )
+  INTEGER :: dim0 = 10     ! Dataset size in file
+  INTEGER :: dim1 = 8 
+
+  INTEGER :: i, j 
+
+  INTEGER :: error         ! Error flag
+  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims
+
+  !
+  ! Write data to the HDF5 file.  
+  !
+
+  !
+  ! Data initialization. 
+  !
+  DO i = 1, dim0 
+     DO j = 1, dim1
+        IF (i .LE. (dim0 / 2)) THEN
+           data(i,j) = 1 
+        ELSE 
+           data(i,j) = 2 
+        END IF
+     END DO
+  END DO
+
+  !
+  ! Initialize FORTRAN interface. 
+  !
+  CALL h5open_f(error) 
+
+  !
+  ! Create a new file using default properties.
+  ! 
+  CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
+
+  !
+  ! Create the data space for the  dataset. 
+  !
+  CALL h5screate_simple_f(rank, dimsf, dataspace, error)
+
+  !
+  ! Create the dataset with default properties.
+  !
+  CALL h5dcreate_f(file_id, dsetname, H5T_NATIVE_INTEGER, dataspace, &
+       dset_id, error)
+
+  !
+  ! Write the dataset.
+  !
+  data_dims(1) = dim0 
+  data_dims(2) = dim1 
+  CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data, data_dims, error)
+
+  !
+  ! Data Written to File 
+  !
+  PRINT*, "Original Data Written to File:"
+  DO i = 1, dim0
+     PRINT*, DATA(i,1:dim1)
+  END DO
+  PRINT*, " "
+
+  !
+  !
+  ! Close the dataspace, dataset, and file.
+  !
+  CALL h5sclose_f(dataspace, error)
+  CALL h5dclose_f(dset_id, error)
+  CALL h5fclose_f(file_id, error)
+
+  !
+  ! Initialize subset data array.
+  !
+  sdata(1:dim0_sub,1:dim1_sub) = 5
+
+  !
+  ! Open the file.
+  !
+  CALL h5fopen_f(filename, H5F_ACC_RDWR_F, file_id, error)
+
+  !
+  ! Open the  dataset.
+  !
+  CALL h5dopen_f(file_id, dsetname, dset_id, error)
+
+  !
+  ! Get dataset's dataspace identifier and select subset.
+  !
+  CALL h5dget_space_f(dset_id, dataspace, error)
+  CALL h5sselect_hyperslab_f(dataspace, H5S_SELECT_SET_F, &
+       offset, count, error, stride, BLOCK) 
+  !
+  ! Create memory dataspace.
+  !
+  CALL h5screate_simple_f(rank, dimsm, memspace, error)
+
+  PRINT *,"Write subset to file specifying:"
+  PRINT *, "   offset=1x2 stride=1x1 count=3x4 block=1x1"
+
+  !
+  ! Write subset to dataset  
+  !
+  data_dims(1:2) = (/dim0_sub, dim1_sub/) 
+  CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, sdata, data_dims, error, &
+       memspace, dataspace)
+
+  data_dims(1:2) = (/dim0, dim1/)
+  CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, rdata, data_dims, error, &
+       H5S_ALL_F, H5S_ALL_F)
+
+  !
+  ! Read entire dataset back 
+  !
+  PRINT *,"Data in File after Subset Written:"
+  DO i = 1, dim0 
+     PRINT *,rdata(i,1:dim1)
+  END DO
+  PRINT *, " "
+
+  !
+  ! Close everything opened.
+  !
+  CALL h5sclose_f(dataspace, error)
+  CALL h5sclose_f(memspace, error)
+  CALL h5dclose_f(dset_id, error)
+  CALL h5fclose_f(file_id, error)
+
+  !
+  ! Close FORTRAN interface.
+  !
+  CALL h5close_f(error)
+
+END PROGRAM H5_SUBSET
diff --git a/fortran/examples/run-fortran-ex.sh.in b/fortran/examples/run-fortran-ex.sh.in
index 873669f..23c2266 100644
--- a/fortran/examples/run-fortran-ex.sh.in
+++ b/fortran/examples/run-fortran-ex.sh.in
@@ -70,20 +70,22 @@ RunTest()
 # Run tests
 if [ $? -eq 0 ]
 then
-    if (RunTest dsetexample &&\
-        rm dsetexample &&\
-        RunTest fileexample &&\
-        rm fileexample &&\
-        RunTest rwdsetexample &&\
-        rm rwdsetexample &&\
-        RunTest attrexample &&\
-        rm attrexample &&\
-        RunTest groupexample &&\
-        rm groupexample &&\
-        RunTest grpsexample &&\
-        rm grpsexample &&\
-        RunTest grpdsetexample &&\
-        rm grpdsetexample &&\
+    if (RunTest h5_crtdat &&\
+        rm h5_crtdat &&\
+        RunTest h5_extend &&\
+        rm h5_extend &&\
+        RunTest h5_rdwt &&\
+        rm h5_rdwt &&\
+        RunTest h5_crtatt &&\
+        rm h5_crtatt &&\
+        RunTest h5_crtgrp &&\
+        rm h5_crtgrp &&\
+        RunTest h5_crtgrpar &&\
+        rm h5_crtgrpar &&\
+        RunTest h5_crtgrpd &&\
+        rm h5_crtgrpd &&\
+        RunTest h5_subset &&\
+        rm h5_subset &&\
         RunTest hyperslab &&\
         rm hyperslab &&\
         RunTest selectele &&\
diff --git a/fortran/examples/rwdsetexample.f90 b/fortran/examples/rwdsetexample.f90
deleted file mode 100644
index 1e84e23..0000000
--- a/fortran/examples/rwdsetexample.f90
+++ /dev/null
@@ -1,96 +0,0 @@
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!   Copyright by The HDF Group.                                               *
-!   Copyright by the Board of Trustees of the University of Illinois.         *
-!   All rights reserved.                                                      *
-!                                                                             *
-!   This file is part of HDF5.  The full HDF5 copyright notice, including     *
-!   terms governing use, modification, and redistribution, is contained in    *
-!   the files COPYING and Copyright.html.  COPYING can be found at the root   *
-!   of the source code distribution tree; Copyright.html can be found at the  *
-!   root level of an installed copy of the electronic HDF5 document set and   *
-!   is linked from the top-level documents page.  It can also be found at     *
-!   http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
-!   access to either file, you may request a copy from help@hdfgroup.org.     *
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-!
-!
-! The following example shows how to write and read to/from an existing dataset.
-! It opens the file created in the previous example, obtains the dataset
-! identifier, writes the data to the dataset in the file,
-! then reads the dataset  to memory.
-!
-
-
-     PROGRAM RWDSETEXAMPLE
-
-     USE HDF5 ! This module contains all necessary modules
-
-     IMPLICIT NONE
-
-     CHARACTER(LEN=8), PARAMETER :: filename = "dsetf.h5" ! File name
-     CHARACTER(LEN=4), PARAMETER :: dsetname = "dset"     ! Dataset name
-
-     INTEGER(HID_T) :: file_id       ! File identifier
-     INTEGER(HID_T) :: dset_id       ! Dataset identifier
-
-     INTEGER     ::   error ! Error flag
-     INTEGER     ::  i, j
-
-     INTEGER, DIMENSION(4,6) :: dset_data, data_out ! Data buffers
-     INTEGER(HSIZE_T), DIMENSION(2) :: data_dims
-
-     !
-     ! Initialize the dset_data array.
-     !
-     do i = 1, 4
-          do j = 1, 6
-               dset_data(i,j) = (i-1)*6 + j;
-          end do
-     end do
-
-     !
-     ! Initialize FORTRAN interface.
-     !
-     CALL h5open_f(error)
-
-     !
-     ! Open an existing file.
-     !
-     CALL h5fopen_f (filename, H5F_ACC_RDWR_F, file_id, error)
-
-     !
-     ! Open an existing dataset.
-     !
-     CALL h5dopen_f(file_id, dsetname, dset_id, error)
-
-     !
-     ! Write the dataset.
-     !
-     data_dims(1) = 4
-     data_dims(2) = 6
-     CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, dset_data, data_dims, error)
-
-     !
-     ! Read the dataset.
-     !
-     CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, data_out, data_dims, error)
-
-     !
-     ! Close the dataset.
-     !
-     CALL h5dclose_f(dset_id, error)
-
-     !
-     ! Close the file.
-     !
-     CALL h5fclose_f(file_id, error)
-
-     !
-     ! Close FORTRAN interface.
-     !
-     CALL h5close_f(error)
-
-     END PROGRAM RWDSETEXAMPLE
-
-
-