[svn-r7269] Purpose:

    Update

Description:
    Revamped the configuration system. The configurations for the Fortran
    and C++ libraries are no longer separate from the "main"
    configuration system. This involved removing the "configure*" and
    "aclocal.m4" files from the fortran/ and c++/ subdirectories. Also
    merging settings in the config/ subdirectories into the main config/
    subdirectory.

    Fortran header files had to be modified a little for Linux. It was
    checking if it was a Linux machine by some #defines, however with the
    -std=c99 switch, these defines weren't there. I added a check for
    some other ones which should be there whether the -std=c99 switch is
    used or not.

Platforms tested:
    Verbena (Fortran & C++)
    Sol (Fortran & C++)
    Copper (Fortran & C++)
    Modi4 (Parallel, Fortran, & C++)

Misc. update:

50 files changed, 29 insertions, 19447 deletions

diff --git a/fortran/Makefile.dist b/fortran/Makefile.dist
deleted file mode 100644
index 0b96c81..0000000
--- a/fortran/Makefile.dist
+++ /dev/null
@@ -1,24 +0,0 @@
-# Top-level distributed Makefile 			       -*- makefile -*-
-
-# This Makefile is a stub (copied from Makefile.dist) which will run
-# configure and then invoke the same target in the new Makefile created
-# by configure.
-
-# Uncomment this variable if your make(1) doesn't set it automatically.
-#
-#MAKE=make
-
-
-SHELL=/bin/sh
-
-all lib progs check test _test install uninstall dep depend: _config
-	$(MAKE) $@
-
-clean mostlyclean distclean maintainer-clean TAGS: _config
-	$(MAKE) $@
-
-_config:
-	sh configure
-
-.PHONY: all lib progs test install uninstall dep depend clean mostlyclean     \
-	distclean maintainer-clean _config
diff --git a/fortran/aclocal.m4 b/fortran/aclocal.m4
deleted file mode 100644
index 0966dc7..0000000
--- a/fortran/aclocal.m4
+++ /dev/null
@@ -1,3528 +0,0 @@
-# aclocal.m4 generated automatically by aclocal 1.6 -*- Autoconf -*-
-
-# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
-
-# serial 46 AC_PROG_LIBTOOL
-
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-_LT_AC_PROG_ECHO_BACKSLASH
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-
-_LT_AC_LTCONFIG_HACK
-
-])
-
-# AC_LIBTOOL_HEADER_ASSERT
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
-[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
-    [lt_cv_func_assert_works],
-    [case $host in
-    *-*-solaris*)
-      if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
-        case `$CC --version 2>/dev/null` in
-        [[12]].*) lt_cv_func_assert_works=no ;;
-        *)        lt_cv_func_assert_works=yes ;;
-        esac
-      fi
-      ;;
-    esac])
-
-if test "x$lt_cv_func_assert_works" = xyes; then
-  AC_CHECK_HEADERS(assert.h)
-fi
-])# AC_LIBTOOL_HEADER_ASSERT
-
-# _LT_AC_CHECK_DLFCN
-# --------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)
-])# _LT_AC_CHECK_DLFCN
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-irix*)
-  symcode='[[BCDEGRST]]'
-  ;;
-solaris* | sysv5*)
-  symcode='[[BDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[[ABCDGISTW]]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Write the raw and C identifiers.
-lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
-
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  save_LIBS="$LIBS"
-	  save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$save_LIBS"
-	  CFLAGS="$save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AC_FD_CC
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AC_FD_CC
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
-    fi
-  else
-    echo "$progname: failed program was:" >&AC_FD_CC
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  global_symbol_to_cdecl=
-  global_symbol_to_c_name_address=
-else
-  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
-  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
-fi
-if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
-then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-# ---------------------------------
-AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
-[# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) lt_cv_sys_path_separator=';' ;;
-    *)     lt_cv_sys_path_separator=':' ;;
-  esac
-  PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-			      [AC_DIVERT_PUSH(NOTICE)])
-_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-AC_DIVERT_POP
-])# _LT_AC_PROG_ECHO_BACKSLASH
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}]
-EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_unknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-# AC_LIBTOOL_DLOPEN_SELF
-# -------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-          [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-	        [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-	          [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-	            [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-AC_DEFUN([_LT_AC_LTCONFIG_HACK],
-[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-need_locks="$enable_libtool_lock"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-if test x"$host" != x"$build"; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case $host_os in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-    ;;
-  *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="[$]2"
-
-AC_MSG_CHECKING([for objdir])
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-AC_MSG_RESULT($objdir)
-
-
-AC_ARG_WITH(pic,
-[  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-pic_mode="$withval", pic_mode=default)
-test -z "$pic_mode" && pic_mode=default
-
-# We assume here that the value for lt_cv_prog_cc_pic will not be cached
-# in isolation, and that seeing it set (from the cache) indicates that
-# the associated values are set (in the cache) correctly too.
-AC_MSG_CHECKING([for $compiler option to produce PIC])
-AC_CACHE_VAL(lt_cv_prog_cc_pic,
-[ lt_cv_prog_cc_pic=
-  lt_cv_prog_cc_shlib=
-  lt_cv_prog_cc_wl=
-  lt_cv_prog_cc_static=
-  lt_cv_prog_cc_no_builtin=
-  lt_cv_prog_cc_can_build_shared=$can_build_shared
-
-  if test "$GCC" = yes; then
-    lt_cv_prog_cc_wl='-Wl,'
-    lt_cv_prog_cc_static='-static'
-
-    case $host_os in
-    aix*)
-      # Below there is a dirty hack to force normal static linking with -ldl
-      # The problem is because libdl dynamically linked with both libc and
-      # libC (AIX C++ library), which obviously doesn't included in libraries
-      # list by gcc. This cause undefined symbols with -static flags.
-      # This hack allows C programs to be linked with "-static -ldl", but
-      # not sure about C++ programs.
-      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_cv_prog_cc_pic='-fno-common'
-      ;;
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	 lt_cv_prog_cc_pic=-Kconform_pic
-      fi
-      ;;
-    *)
-      lt_cv_prog_cc_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for PIC flags for the system compiler.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      lt_cv_prog_cc_wl='-Wl,'
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_cv_prog_cc_static='-Bstatic'
-      else
-        ####################################################################
-        ## HACK Alert! This is causing problems with C++ on SP3...We'll just
-        ## remove this...THERE! All better now.
-        ####################################################################
-        ##lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
-		:
-      fi
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
-      lt_cv_prog_cc_pic='+Z'
-      ;;
-
-    irix5* | irix6*)
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
-      # PIC (with -KPIC) is the default.
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-
-    newsos6)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      # All OSF/1 code is PIC.
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      lt_cv_prog_cc_pic='-Kpic'
-      lt_cv_prog_cc_static='-dn'
-      lt_cv_prog_cc_shlib='-belf'
-      ;;
-
-    solaris*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Wl,'
-      ;;
-
-    sunos4*)
-      lt_cv_prog_cc_pic='-PIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Qoption ld '
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      if test "x$host_vendor" = xsni; then
-	lt_cv_prog_cc_wl='-LD'
-      else
-	lt_cv_prog_cc_wl='-Wl,'
-      fi
-      ;;
-
-    uts4*)
-      lt_cv_prog_cc_pic='-pic'
-      lt_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_cv_prog_cc_pic='-Kconform_pic'
-	lt_cv_prog_cc_static='-Bstatic'
-      fi
-      ;;
-
-    *)
-      lt_cv_prog_cc_can_build_shared=no
-      ;;
-    esac
-  fi
-])
-if test -z "$lt_cv_prog_cc_pic"; then
-  AC_MSG_RESULT([none])
-else
-  AC_MSG_RESULT([$lt_cv_prog_cc_pic])
-
-  # Check to make sure the pic_flag actually works.
-  AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works])
-  AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl
-    save_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
-    AC_TRY_COMPILE([], [], [dnl
-      case $host_os in
-      hpux9* | hpux10* | hpux11*)
-	# On HP-UX, both CC and GCC only warn that PIC is supported... then
-	# they create non-PIC objects.  So, if there were any warnings, we
-	# assume that PIC is not supported.
-	if test -s conftest.err; then
-	  lt_cv_prog_cc_pic_works=no
-	else
-	  lt_cv_prog_cc_pic_works=yes
-	fi
-	;;
-      *)
-	lt_cv_prog_cc_pic_works=yes
-	;;
-      esac
-    ], [dnl
-      lt_cv_prog_cc_pic_works=no
-    ])
-    CFLAGS="$save_CFLAGS"
-  ])
-
-  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
-    lt_cv_prog_cc_pic=
-    lt_cv_prog_cc_can_build_shared=no
-  else
-    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
-  fi
-
-  AC_MSG_RESULT([$lt_cv_prog_cc_pic_works])
-fi
-
-# Check for any special shared library compilation flags.
-if test -n "$lt_cv_prog_cc_shlib"; then
-  AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$lt_cv_prog_cc_shlib[[ 	]]" >/dev/null; then :
-  else
-   AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
-    lt_cv_prog_cc_can_build_shared=no
-  fi
-fi
-
-AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works])
-AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl
-  lt_cv_prog_cc_static_works=no
-  save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
-  AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes])
-  LDFLAGS="$save_LDFLAGS"
-])
-
-# Belt *and* braces to stop my trousers falling down:
-test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
-AC_MSG_RESULT([$lt_cv_prog_cc_static_works])
-
-pic_flag="$lt_cv_prog_cc_pic"
-special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
-wl="$lt_cv_prog_cc_wl"
-link_static_flag="$lt_cv_prog_cc_static"
-no_builtin_flag="$lt_cv_prog_cc_no_builtin"
-can_build_shared="$lt_cv_prog_cc_can_build_shared"
-
-
-# Check to see if options -o and -c are simultaneously supported by compiler
-AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext])
-AC_CACHE_VAL([lt_cv_compiler_c_o], [
-$rm -r conftest 2>/dev/null
-mkdir conftest
-cd conftest
-echo "int some_variable = 0;" > conftest.$ac_ext
-mkdir out
-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-# that will create temporary files in the current directory regardless of
-# the output directory.  Thus, making CWD read-only will cause this test
-# to fail, enabling locking or at least warning the user not to do parallel
-# builds.
-chmod -w .
-save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
-compiler_c_o=no
-if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
-  # The compiler can only warn and ignore the option if not recognized
-  # So say no if there are warnings
-  if test -s out/conftest.err; then
-    lt_cv_compiler_c_o=no
-  else
-    lt_cv_compiler_c_o=yes
-  fi
-else
-  # Append any errors to the config.log.
-  cat out/conftest.err 1>&AC_FD_CC
-  lt_cv_compiler_c_o=no
-fi
-CFLAGS="$save_CFLAGS"
-chmod u+w .
-$rm conftest* out/*
-rmdir out
-cd ..
-rmdir conftest
-$rm -r conftest 2>/dev/null
-])
-compiler_c_o=$lt_cv_compiler_c_o
-AC_MSG_RESULT([$compiler_c_o])
-
-if test x"$compiler_c_o" = x"yes"; then
-  # Check to see if we can write to a .lo
-  AC_MSG_CHECKING([if $compiler supports -c -o file.lo])
-  AC_CACHE_VAL([lt_cv_compiler_o_lo], [
-  lt_cv_compiler_o_lo=no
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -c -o conftest.lo"
-  save_objext="$ac_objext"
-  ac_objext=lo
-  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
-    # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      lt_cv_compiler_o_lo=no
-    else
-      lt_cv_compiler_o_lo=yes
-    fi
-  ])
-  ac_objext="$save_objext"
-  CFLAGS="$save_CFLAGS"
-  ])
-  compiler_o_lo=$lt_cv_compiler_o_lo
-  AC_MSG_RESULT([$compiler_o_lo])
-else
-  compiler_o_lo=no
-fi
-
-# Check to see if we can do hard links to lock some files if needed
-hard_links="nottested"
-if test "$compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-if test "$GCC" = yes; then
-  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
-  AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions])
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
-  compiler_rtti_exceptions=no
-  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
-    # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      compiler_rtti_exceptions=no
-    else
-      compiler_rtti_exceptions=yes
-    fi
-  ])
-  CFLAGS="$save_CFLAGS"
-  AC_MSG_RESULT([$compiler_rtti_exceptions])
-
-  if test "$compiler_rtti_exceptions" = "yes"; then
-    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
-  else
-    no_builtin_flag=' -fno-builtin'
-  fi
-fi
-
-# See if the linker supports building shared libraries.
-AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries])
-
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-old_archive_from_expsyms_cmds=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_into_libs=no
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-link_all_deplibs=unknown
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced.  Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-extract_expsyms_cmds=
-
-case $host_os in
-cygwin* | mingw* | pw32*)
-  # FIXME: the MSVC++ port hasn't been tested in a loooong time
-  # When not using gcc, we currently assume that we are using
-  # Microsoft Visual C++.
-  if test "$GCC" != yes; then
-    with_gnu_ld=no
-  fi
-  ;;
-openbsd*)
-  with_gnu_ld=no
-  ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # If archive_cmds runs LD, not CC, wlarc should be empty
-  wlarc='${wl}'
-
-  # See if GNU ld supports shared libraries.
-  case $host_os in
-  aix3* | aix4* | aix5*)
-    # On AIX, the GNU linker is very broken
-    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
-    ld_shlibs=no
-    cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-
-    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-    # that the semantics of dynamic libraries on AmigaOS, at least up
-    # to version 4, is to share data among multiple programs linked
-    # with the same dynamic library.  Since this doesn't match the
-    # behavior of shared libraries on other platforms, we can use
-    # them.
-    ld_shlibs=no
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec='-L$libdir'
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-
-    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-      else $CC -o impgen impgen.c ; fi)~
-      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-    # cygwin and mingw dlls have different entry points and sets of symbols
-    # to exclude.
-    # FIXME: what about values for MSVC?
-    dll_entry=__cygwin_dll_entry@12
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-    case $host_os in
-    mingw*)
-      # mingw values
-      dll_entry=_DllMainCRTStartup@12
-      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-      ;;
-    esac
-
-    # mingw and cygwin differ, and it's simplest to just exclude the union
-    # of the two symbol sets.
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-    # recent cygwin and mingw systems supply a stub DllMain which the user
-    # can override, but on older systems we have to supply one (in ltdll.c)
-    if test "x$lt_cv_need_dllmain" = "xyes"; then
-      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-    else
-      ltdll_obj=
-      ltdll_cmds=
-    fi
-
-    # Extract the symbol export list from an `--export-all' def file,
-    # then regenerate the def file from the symbol export list, so that
-    # the compiled dll only exports the symbol export list.
-    # Be careful not to strip the DATA tag left be newer dlltools.
-    export_symbols_cmds="$ltdll_cmds"'
-      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-      sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-    # If the export-symbols file already is a .def file (1st line
-    # is EXPORTS), use it as is.
-    # If DATA tags from a recent dlltool are present, honour them!
-    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname-def;
-      else
-	echo EXPORTS > $output_objdir/$soname-def;
-	_lt_hint=1;
-	cat $export_symbols | while read symbol; do
-	 set dummy \$symbol;
-	 case \[$]# in
-	   2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	   *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-	 esac;
-	 _lt_hint=`expr 1 + \$_lt_hint`;
-	done;
-      fi~
-      '"$ltdll_cmds"'
-      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-      wlarc=
-    else
-      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    fi
-    ;;
-
-  solaris* | sysv5*)
-    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-      ld_shlibs=no
-      cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    wlarc=
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-  esac
-
-  if test "$ld_shlibs" = yes; then
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    case $host_os in
-    cygwin* | mingw* | pw32*)
-      # dlltool doesn't understand --whole-archive et. al.
-      whole_archive_flag_spec=
-      ;;
-    *)
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-	whole_archive_flag_spec=
-      fi
-      ;;
-    esac
-  fi
-else
-  # PORTME fill in a description of your system's linker (not GNU ld)
-  case $host_os in
-  aix3*)
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-    # Note: this linker hardcodes the directories in LIBPATH if there
-    # are no directories specified by -L.
-    hardcode_minus_L=yes
-    if test "$GCC" = yes && test -z "$link_static_flag"; then
-      # Neither direct hardcoding nor static linking is supported with a
-      # broken collect2.
-      hardcode_direct=unsupported
-    fi
-    ;;
-
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-	    aix_use_runtimelinking=yes
-	    break
-	  fi
-	done
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    hardcode_direct=yes
-    archive_cmds=''
-    hardcode_libdir_separator=':'
-    if test "$GCC" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	  strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  hardcode_direct=yes
-	else
-	  # We have old collect2
-	  hardcode_direct=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L=yes
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_libdir_separator=
-	fi
-      esac
-
-      shared_flag='-shared'
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	shared_flag='${wl}-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall can do strange things, so it is better to
-    # generate a list of symbols to export.
-    always_export_symbols=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag='-berok'
-      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-    else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag="-z nodefs"
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-      else
-        #######################################################################
-        # This is a MAJOR HACK(tm) to get HDF5 to compile on Pacific Blue.
-        # The ``-b nolibpath -b ...'' flags were messing with the mpicc
-        # compiler's already defined library paths and it wasn't able to find
-        # the libraries it needed to run....DOH!
-        hname="`hostname`"
-
-        case "$hname" in
-          *pacific.llnl.gov* | *s0*)
-            hardcode_libdir_flag_spec=' '
-            ;;
-          *)
-            hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-            ;;
-        esac
-        #
-        # End MAJOR HACK
-        #
-        #######################################################################
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='${wl}-berok'
-	# This is a bit strange, but is similar to how AIX traditionally builds
-	# it's shared libraries.
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
-      fi
-    fi
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    # see comment about different semantics on the GNU ld section
-    ld_shlibs=no
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec=' '
-    allow_undefined_flag=unsupported
-    # Tell ltmain to make .lib files, not .a files.
-    libext=lib
-    # FIXME: Setting linknames here is a bad hack.
-    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-    # The linker will automatically build a .lib file if we build a DLL.
-    old_archive_from_new_cmds='true'
-    # FIXME: Should let the user specify the lib program.
-    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
-    fix_srcfile_path='`cygpath -w "$srcfile"`'
-    ;;
-
-  darwin* | rhapsody*)
-    case "$host_os" in
-    rhapsody* | darwin1.[[012]])
-      allow_undefined_flag='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      allow_undefined_flag='-flat_namespace -undefined suppress'
-      ;;
-    esac
-    # FIXME: Relying on posixy $() will cause problems for
-    #        cross-compilation, but unfortunately the echo tests do not
-    #        yet detect zsh echo's removal of \ escapes.
-    archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
-    # We need to add '_' to the symbols in $export_symbols first
-    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    whole_archive_flag_spec='-all_load $convenience'
-    ;;
-
-  freebsd1*)
-    ld_shlibs=no
-    ;;
-
-  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-  # support.  Future versions do this automatically, but an explicit c++rt0.o
-  # does not break anything, and helps significantly (at the cost of a little
-  # extra space).
-  freebsd2.2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-  freebsd2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-  freebsd*)
-    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  hpux9* | hpux10* | hpux11*)
-    case $host_os in
-    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
-    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
-    esac
-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_direct=yes
-    hardcode_minus_L=yes # Not in the search PATH, but as the default
-			 # location of the library.
-    export_dynamic_flag_spec='${wl}-E'
-    ;;
-
-  irix5* | irix6*)
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-    else
-      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    link_all_deplibs=yes
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-    else
-      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-    fi
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  newsos6)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_shlibpath_var=no
-    ;;
-
-  openbsd*)
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
-    else
-      case "$host_os" in
-      openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_libdir_flag_spec='-R$libdir'
-        ;;
-      *)
-        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-        ;;
-      esac
-    fi
-    ;;
-
-  os2*)
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    allow_undefined_flag=unsupported
-    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-    ;;
-
-  osf3*)
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    ;;
-
-  osf4* | osf5*)	# as osf3* with the addition of -msym flag
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-      #Both c and cxx compiler support -rpath directly
-      hardcode_libdir_flag_spec='-rpath $libdir'
-    fi
-    hardcode_libdir_separator=:
-    ;;
-
-  sco3.2v5*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    runpath_var=LD_RUN_PATH
-    hardcode_runpath_var=yes
-    export_dynamic_flag_spec='${wl}-Bexport'
-    ;;
-
-  solaris*)
-    # gcc --version < 3.0 without binutils cannot create self contained
-    # shared libraries reliably, requiring libgcc.a to resolve some of
-    # the object symbols generated in some cases.  Libraries that use
-    # assert need libgcc.a to resolve __eprintf, for example.  Linking
-    # a copy of libgcc.a into every shared library to guarantee resolving
-    # such symbols causes other problems:  According to Tim Van Holder
-    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
-    # (to the application) exception stack for one thing.
-    no_undefined_flag=' -z defs'
-    if test "$GCC" = yes; then
-      case `$CC --version 2>/dev/null` in
-      [[12]].*)
-	cat <<EOF 1>&2
-
-*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
-*** create self contained shared libraries on Solaris systems, without
-*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
-*** -no-undefined support, which will at least allow you to build shared
-*** libraries.  However, you may find that when you link such libraries
-*** into an application without using GCC, you have to manually add
-*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
-*** upgrade to a newer version of GCC.  Another option is to rebuild your
-*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
-
-EOF
-        no_undefined_flag=
-	;;
-      esac
-    fi
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_shlibpath_var=no
-    case $host_os in
-    solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
-    esac
-    link_all_deplibs=yes
-    ;;
-
-  sunos4*)
-    if test "x$host_vendor" = xsequent; then
-      # Use $CC to link under sequent, because it throws in some extra .o
-      # files that make .init and .fini sections work.
-      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-    fi
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4)
-    if test "x$host_vendor" = xsno; then
-      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes # is this really true???
-    else
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-    fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4.3*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    export_dynamic_flag_spec='-Bexport'
-    ;;
-
-  sysv5*)
-    no_undefined_flag=' -z text'
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec=
-    hardcode_shlibpath_var=no
-    runpath_var='LD_RUN_PATH'
-    ;;
-
-  uts4*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  dgux*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4*MP*)
-    if test -d /usr/nec; then
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ld_shlibs=yes
-    fi
-    ;;
-
-  sysv4.2uw2*)
-    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=no
-    hardcode_shlibpath_var=no
-    hardcode_runpath_var=yes
-    runpath_var=LD_RUN_PATH
-    ;;
-
-  sysv5uw7* | unixware7*)
-    no_undefined_flag='${wl}-z ${wl}text'
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    ld_shlibs=no
-    ;;
-  esac
-fi
-AC_MSG_RESULT([$ld_shlibs])
-test "$ld_shlibs" = no && can_build_shared=no
-
-# Check hardcoding attributes.
-AC_MSG_CHECKING([how to hardcode library paths into programs])
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var"; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$hardcode_shlibpath_var" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-AC_MSG_RESULT([$hardcode_action])
-
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-  AC_MSG_RESULT([no])
-fi
-
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-# PORTME Fill in your ld.so characteristics
-AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	     echo ' yes '
-	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	  :
-	else
-	  can_build_shared=no
-	fi
-	;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can
-    # not hardcode correct soname into executable. Probably we can
-    # add versioning support to collect2, so additional links can
-    # be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  export_dynamic_flag_spec=-rdynamic
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  case $GCC,$host_os in
-  yes,cygwin*)
-    library_names_spec='$libname.dll.a'
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    ;;
-  *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  *)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  dynamic_linker="$host_os dld.sl"
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  shlibpath_var=SHLIB_PATH
-  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-  soname_spec='${libname}${release}.sl$major'
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6*)
-  version_type=irix
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
-  case $host_os in
-  irix5*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case "$host_os" in
-    openbsd2.[[89]] | openbsd2.[[89]].*)
-      shlibpath_overrides_runpath=no
-      ;;
-    *)
-      shlibpath_overrides_runpath=yes
-      ;;
-    esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-# Report the final consequences.
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-if test "$hardcode_action" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-AC_LIBTOOL_DLOPEN_SELF
-
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $archive_cmds in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-    AC_CACHE_VAL([lt_cv_archive_cmds_need_lc],
-    [$rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if AC_TRY_EVAL(ac_compile); then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$lt_cv_prog_cc_wl
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      save_allow_undefined_flag=$allow_undefined_flag
-      allow_undefined_flag=
-      if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-      then
-	lt_cv_archive_cmds_need_lc=no
-      else
-	lt_cv_archive_cmds_need_lc=yes
-      fi
-      allow_undefined_flag=$save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi])
-    AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc])
-    ;;
-  esac
-fi
-need_lc=${lt_cv_archive_cmds_need_lc-yes}
-
-# The second clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  :
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-
-if test -f "$ltmain"; then
-  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
-  $rm -f "${ofile}T"
-
-  echo creating $ofile
-
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS \
-    AR AR_FLAGS CC LD LN_S NM SHELL \
-    reload_flag reload_cmds wl \
-    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
-    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
-    library_names_spec soname_spec \
-    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
-    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
-    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
-    old_striplib striplib file_magic_cmd export_symbols_cmds \
-    deplibs_check_method allow_undefined_flag no_undefined_flag \
-    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
-    global_symbol_to_c_name_address \
-    hardcode_libdir_flag_spec hardcode_libdir_separator  \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
-
-    case $var in
-    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
-    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  cat <<__EOF__ > "${ofile}T"
-#! $SHELL
-
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996-2000 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$need_lc
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# The default C compiler.
-CC=$lt_CC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_pic_flag
-pic_mode=$pic_mode
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_compiler_c_o
-
-# Can we write directly to a .lo ?
-compiler_o_lo=$lt_compiler_o_lo
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_link_static_flag
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "${ofile}T"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | os2*)
-    cat <<'EOF' >> "${ofile}T"
-      # This is a source program that is used to create dlls on Windows
-      # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-	# This is a source program that is used to create import libraries
-	# on Windows for dlls which lack them. Don't remove nor modify the
-	# starting and closing comments
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
-#
-#  This file is part of GNU libtool.
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-#
-# #include <stdio.h>		/* for printf() */
-# #include <unistd.h>		/* for open(), lseek(), read() */
-# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-# #include <string.h>		/* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-#      int fd;
-#      int offset;
-# {
-#   unsigned char b[2];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 2);
-#   return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-#     int fd;
-#     int offset;
-# {
-#   unsigned char b[4];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 4);
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-#      void *ptr;
-# {
-#   unsigned char *b = ptr;
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-#     int argc;
-#     char *argv[];
-# {
-#     int dll;
-#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#     unsigned long export_rva, export_size, nsections, secptr, expptr;
-#     unsigned long name_rvas, nexp;
-#     unsigned char *expdata, *erva;
-#     char *filename, *dll_name;
-#
-#     filename = argv[1];
-#
-#     dll = open(filename, O_RDONLY|O_BINARY);
-#     if (dll < 1)
-# 	return 1;
-#
-#     dll_name = filename;
-#
-#     for (i=0; filename[i]; i++)
-# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-# 	    dll_name = filename + i +1;
-#
-#     pe_header_offset = pe_get32 (dll, 0x3c);
-#     opthdr_ofs = pe_header_offset + 4 + 20;
-#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-#     if (num_entries < 1) /* no exports */
-# 	return 1;
-#
-#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#     export_size = pe_get32 (dll, opthdr_ofs + 100);
-#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#     secptr = (pe_header_offset + 4 + 20 +
-# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-#     expptr = 0;
-#     for (i = 0; i < nsections; i++)
-#     {
-# 	char sname[8];
-# 	unsigned long secptr1 = secptr + 40 * i;
-# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# 	lseek(dll, secptr1, SEEK_SET);
-# 	read(dll, sname, 8);
-# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# 	{
-# 	    expptr = fptr + (export_rva - vaddr);
-# 	    if (export_rva + export_size > vaddr + vsize)
-# 		export_size = vsize - (export_rva - vaddr);
-# 	    break;
-# 	}
-#     }
-#
-#     expdata = (unsigned char*)malloc(export_size);
-#     lseek (dll, expptr, SEEK_SET);
-#     read (dll, expdata, export_size);
-#     erva = expdata - export_rva;
-#
-#     nexp = pe_as32 (expdata+24);
-#     name_rvas = pe_as32 (expdata+32);
-#
-#     printf ("EXPORTS\n");
-#     for (i = 0; i<nexp; i++)
-#     {
-# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#     }
-#
-#     return 0;
-# }
-# /* impgen.c ends here */
-
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
-
-  mv -f "${ofile}T" "$ofile" || \
-    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
-  chmod +x "$ofile"
-fi
-
-])# _LT_AC_LTCONFIG_HACK
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-# AC_PROG_LD_GNU -
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* | pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[[012]])
-    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libc.sl
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-  else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[[78]]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
-AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
diff --git a/fortran/acsite.m4 b/fortran/acsite.m4
deleted file mode 100644
index 46f69f9..0000000
--- a/fortran/acsite.m4
+++ /dev/null
@@ -1,504 +0,0 @@
-dnl -------------------------------------------------------------------------
-dnl -------------------------------------------------------------------------
-dnl
-dnl Copyright by the Board of Trustees of the University of Illinois.
-dnl All rights reserved.
-dnl
-dnl This file is part of HDF5.  The full HDF5 copyright notice, including
-dnl terms governing use, modification, and redistribution, is contained in
-dnl the files COPYING and Copyright.html.  COPYING can be found at the root
-dnl of the source code distribution tree; Copyright.html can be found at the
-dnl root level of an installed copy of the electronic HDF5 document set and
-dnl is linked from the top-level documents page.  It can also be found at
-dnl http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-dnl access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-dnl
-dnl Macros for HDF5 Fortran
-dnl
-dnl -------------------------------------------------------------------------
-dnl -------------------------------------------------------------------------
-
-dnl -------------------------------------------------------------------------
-dnl AC_PROG_F9X
-dnl
-dnl	Check for a Fortran 9X compiler.
-dnl
-AC_DEFUN(AC_PROG_F9X,
-[AC_CHECK_PROGS(F9X, f90 pgf90 xlf90 f95 g95 xlf95)
-test -z "$F9X" && AC_MSG_ERROR([no acceptable f9X compiler found in \$PATH])
-
-AC_PROG_F9X_WORKS
-AC_PROG_F9X_GNU
-
-if test $ac_cv_prog_g9x = yes; then
-  G9X=yes
-  dnl Check whether -g works, even if FFLAGS is set, in case the package
-  dnl plays around with FFLAGS (such as to build both debugging and
-  dnl normal versions of a library), tasteless as that idea is.
-  ac_test_FFLAGS="${FFLAGS+set}"
-  ac_save_FFLAGS="$FFLAGS"
-  FFLAGS=
-  AC_PROG_F9X_G
-  if test "$ac_test_FFLAGS" = set; then
-    FFLAGS="$ac_save_FFLAGS"
-  elif test $ac_cv_prog_f9x_g = yes; then
-    FFLAGS="-g -O2"
-  else
-    FFLAGS="-O2"
-  fi
-else
-  G9X=
-  test "${FFLAGS+set}" = set || FFLAGS="-g"
-fi
-])
-
-dnl -------------------------------------------------------------------------
-dnl AC_TRY_F9X_COMPILER()
-dnl
-dnl	It would be nice if the compiler actually works.
-dnl
-AC_DEFUN(AC_TRY_F9X_COMPILER, [
-cat > conftest.$ac_ext << EOF
-[$1]
-EOF
-if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-  [$2]=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    [$3]=no
-  else
-    [$3]=yes
-  fi
-else
-  echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD
-  cat conftest.$ac_ext >&AS_MESSAGE_LOG_FD
-  [$2]=no
-fi
-rm -fr conftest*
-])
-
-dnl -------------------------------------------------------------------------
-dnl AC_LANG_FORTRAN9X()
-dnl
-dnl	Generic macro to setup the Fortran 9X specific env variables.
-dnl
-m4_define([AC_LANG(FORTRAN9X)],
-[ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&AS_MESSAGE_LOG_FD'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&AS_MESSAGE_LOG_FD'
-cross_compiling=$ac_cv_prog_f9x_cross
-])
-
-AU_DEFUN([AC_LANG_FORTRAN9X], [AC_LANG(FORTRAN9X)])
-
-dnl -------------------------------------------------------------------------
-dnl AC_LANG_F9X_WORKS()
-dnl
-dnl	It would be nice if the compiler actually works.
-dnl
-AC_DEFUN(AC_PROG_F9X_WORKS, [
-AC_MSG_CHECKING([whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works])
-AC_LANG_SAVE
-AC_LANG_FORTRAN9X
-AC_TRY_F9X_COMPILER([
-      program conftest
-      end
-], ac_cv_prog_f9x_works, ac_cv_prog_f9x_cross)
-AC_LANG_RESTORE
-AC_MSG_RESULT($ac_cv_prog_f9x_works)
-if test $ac_cv_prog_f9x_works = no; then
-  AC_MSG_ERROR([installation or configuration problem: Fortran 9X compiler cannot create executables.])
-fi
-AC_MSG_CHECKING([whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler])
-AC_MSG_RESULT($ac_cv_prog_f9x_cross)
-cross_compiling=$ac_cv_prog_f9x_cross
-])
-
-dnl -------------------------------------------------------------------------
-dnl AC_PROG_F9X_GNU
-dnl
-dnl	Test whether for Fortran 9X compiler is `g95' (the GNU Fortran 95
-dnl	Compiler). This test depends on whether the Fortran 9X compiler
-dnl	can do CPP pre-processing.
-dnl
-AC_DEFUN(AC_PROG_F9X_GNU,
-[AC_CACHE_CHECK(whether we are using GNU Fortran 95, ac_cv_prog_g9x,
-[cat > conftest.fpp <<EOF
-#ifdef __GNUC__
-  yes
-#endif
-EOF
-if AC_TRY_COMMAND($F9X -E conftest.fpp) | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_g9x=yes
-else
-  ac_cv_prog_g9x=no
-fi])])
-
-dnl -------------------------------------------------------------------------
-dnl AC_PROG_F9X_G
-dnl
-dnl	Test whether the Fortran 9X compiler can accept the `-g' option
-dnl	to enable debugging.
-dnl
-AC_DEFUN(AC_PROG_F9X_G,
-[AC_CACHE_CHECK(whether $F9X accepts -g, ac_cv_prog_f9x_g,
-[cat > conftest.f << EOF
-       program conftest
-       end
-EOF
-if test -z "`$F9X -g -c conftest.f 2>&1`"; then
-  ac_cv_prog_f9x_g=yes
-else
-  ac_cv_prog_f9x_g=no
-fi
-rm -f conftest*
-])])
-
-dnl -------------------------------------------------------------------------
-dnl AC_F9X_OPT_FLAGS()
-dnl
-dnl	Check for optimizer flags the Fortran compiler can use.
-dnl
-AC_DEFUN(AC_F9X_OPT_FLAGS,
-[AC_MSG_CHECKING([for $F9X optimizer flags])
-AC_LANG_SAVE
-AC_LANG_FORTRAN9X
-
-for flags in "-fast" "-O3" "-O" "";do
-  cat > conftest.$ac_ext <<EOF
-      program main
-      end
-EOF
-  ac_compile='${F9X-f90} -c $flag $FFLAGS conftest.$ac_ext 1>&AS_MESSAGE_LOG_FD'
-  if AC_TRY_EVAL(ac_compile); then
-    if grep 'passed to ld' conftest.out > /dev/null 2>&1; then :; else
-      FFLAGS="$FFLAGS $flags"
-      break
-    fi
-  fi
-done
-
-if test -n "$flags"; then
-  echo "$flags" 1>&6
-else
-  echo "none" 1>&6
-fi
-rm -f conftest*
-])
-
-dnl -------------------------------------------------------------------------
-dnl AC_F9X_MODS()
-dnl
-dnl	Check how F9X handles modules. This macro also checks which
-dnl	command-line option to use to include the module once it's built.
-dnl
-AC_DEFUN(AC_F9X_MODS,
-[AC_MSG_CHECKING(what $F9X does with modules)
-AC_LANG_SAVE
-AC_LANG_FORTRAN9X
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-      module module
-         integer foo
-      end module module
-EOF
-
-eval $ac_compile
-modfiles=""
-F9XMODEXT=""
-
-for f in conftest.o module.mod MODULE.mod module.M MODULE.M; do
-  if test -f "$f" ; then
-    modfiles="$f"
-
-    case "$f" in
-      *.o)   F9XMODEXT="o" ;;
-      *.mod) F9XMODEXT="mod" ;;
-      *.M)   F9XMODEXT="M" ;;
-    esac
-  fi
-done
-
-echo $modfiles 6>&1
-if test "$modfiles" = file.o; then
-  echo $ac_n "checking whether $F9X -em is saner""... $ac_c" 1>&6
-  OLD_FFLAGS=$FFLAGS
-  FFLAGS="$FFLAGS -em"
-  eval $ac_compile
-  modfiles=""
-  for f in file.o module.mod MODULE.mod module.M MODULE.M; do
-    test -f $f && modfiles="$f"
-  done
-  if test "$modfiles" = "file.o"; then
-    FFLAGS=$OLD_FFLAGS
-    echo no 6>&1
-  else
-    echo yes 6>&1
-  fi
-fi
-cd ..
-
-AC_MSG_CHECKING(how $F9X finds modules)
-
-for flag in "-I" "-M" "-p"; do
-  cat >conftest.$ac_ext <<EOF
-      program conftest
-          use module
-      end program conftest
-EOF
-
-  ac_compile='${F9X-f90} $FFLAGS ${flag}conftestdir -c conftest.$ac_ext 1>&AS_MESSAGE_LOG_FD'
-
-  if AC_TRY_EVAL(ac_compile); then
-    F9XMODFLAG=$flag
-    break
-  fi
-done
-
-if test -n "$F9XMODFLAG"; then
-  echo $F9XMODFLAG 1>&6
-  FFLAGS="$F9XMODFLAG. $F9XMODFLAG../src $FFLAGS"
-else
-  echo unknown 1>&6
-fi
-AC_SUBST(F9XMODFLAG)
-AC_SUBST(F9XMODEXT)
-rm -rf conftest*
-])
-
-dnl -------------------------------------------------------------------------
-dnl AC_TRY_FCOMPILE()
-dnl
-dnl	Check if we can compile a simple Fortran 90 program.
-dnl
-dnl AC_TRY_FCOMPILE(FUNCTION-BODY,
-dnl                 [ACTION-IF-SUCCESS], [ACTION-IF-NOT-SUCCESS])
-dnl
-AC_DEFUN([AC_TRY_FCOMPILE],
-[AC_LANG_SAVE
-AC_LANG_FORTRAN9X
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-          $1
-EOF
-
-if AC_TRY_EVAL(ac_compile); then
-  :
-  [$2]
-else
-  :
-  [$3]
-fi
-cd ..
-rm -rf conftest*
-])
-
-dnl -------------------------------------------------------------------------
-dnl AC_TRY_FLINK()
-dnl
-dnl	Check if we can link a simple Fortran 90 program.
-dnl
-dnl AC_TRY_FLINK(INCLUDES, FUNCTION-BODY,
-dnl              [ACTION-IF-SUCCESS], [ACTION-IF-NOT-SUCCESS])
-dnl
-AC_DEFUN([AC_TRY_FLINK],
-[AC_LANG_SAVE
-AC_LANG_FORTRAN9X
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-        program conftest
-          include '$1'
-          $2
-        end
-EOF
-
-if AC_TRY_EVAL(ac_compile) && AC_TRY_EVAL(ac_link); then
-  :
-  [$3]
-else
-  :
-  [$4]
-fi
-cd ..
-rm -rf conftest*
-])
-
-dnl -------------------------------------------------------------------------
-dnl AC_CHECK_FLIB()
-dnl
-dnl	Check if we can link a simple Fortran 90 program with the specified library.
-dnl
-dnl AC_CHECK_FLIB(LIBRARY, FUNCTION-BODY,
-dnl               [ACTION-IF-SUCCESS], [ACTION-IF-NOT-SUCCESS])
-dnl
-AC_DEFUN([AC_CHECK_FLIB],
-[AC_LANG_SAVE
-AC_LANG_FORTRAN9X
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-        program conftest
-          $2
-        end
-EOF
-
-if test -n "$1"; then
-  saved_LIBS="$LIBS"
-  LIBS="$LIBS -l$1"
-fi
-
-if AC_TRY_EVAL(ac_compile) && AC_TRY_EVAL(ac_link); then
-  :
-  [$3]
-else
-  LIBS="$saved_LIBS"
-  [$4]
-fi
-cd ..
-rm -rf conftest*
-])
-
-dnl -------------------------------------------------------------------------
-dnl -------------------------------------------------------------------------
-dnl
-dnl Possible future tests for the Fortran stuff...
-dnl
-dnl -------------------------------------------------------------------------
-dnl -------------------------------------------------------------------------
-dnl
-dnl echo $ac_n "checking whether f90 real type has 12 digits of precision""... $ac_c" 1>&6
-dnl cat >conftest.f90 <<'EOF'
-dnl program conftest
-dnl 	if (selected_real_kind(12) .eq. kind(0.0)) then
-dnl 		print '(a)','YES'
-dnl 	else
-dnl 		print '(a)','NO'
-dnl 	end if
-dnl end program conftest
-dnl EOF
-dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1
-dnl if test "`./conftest | head -1`" = YES; then
-dnl 	echo "yes" 1>&6
-dnl 	AC_DEFINE(HIPREC)
-dnl else
-dnl 	echo "no" 1>&6
-dnl fi
-
-dnl echo $ac_n "checking whether f90 precision of default real type""... $ac_c" 1>&6
-dnl cat >conftest.f90 <<'EOF'
-dnl program conftest
-dnl 	if (kind(0.0) .eq. selected_real_kind(12) .or.&
-dnl 		&kind(0.0) .eq. selected_real_kind(6) ) then
-dnl 		print '(a)','YES'
-dnl 	else
-dnl 		print '(a)','NO'
-dnl 	end if
-dnl end program conftest
-dnl EOF
-dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1
-dnl if test "`./conftest | head -1`" = YES; then
-dnl 	echo "OK" 1>&6
-dnl 	AC_DEFINE(REALOK)
-dnl else
-dnl 	echo "no" 1>&6
-dnl fi
-
-dnl echo $ac_n "checking accuracy of arithmetic""... $ac_c" 1>&6
-dnl cat >conftest.f90 <<'EOF'
-dnl program conftest
-dnl 	integer, parameter :: double=selected_real_kind(12)
-dnl 	real(double), parameter :: ulp=2.0_double**(-47)
-dnl 	real(double), parameter :: ans=0.92699498904359955986_double
-dnl 	real(double) :: x,y,z
-dnl 	integer i
-dnl 	x=0.0_double
-dnl 	y=ulp
-dnl 	do i=2,100
-dnl 		z=x+y
-dnl 		x=y
-dnl 		y=z-int(z)
-dnl 	end do
-dnl 	if (y-ans .lt. ulp/2.0_double) then
-dnl 		print '(a)','YES'
-dnl 	else
-dnl 		print '(a)','NO'
-dnl 	end if
-dnl end program conftest
-dnl EOF
-dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1
-dnl if test "`./conftest | head -1`" = YES; then
-dnl 	echo "OK" 1>&6
-dnl 	AC_DEFINE(ARITHOK)
-dnl else
-dnl 	echo "no" 1>&6
-dnl fi
-
-dnl echo $ac_n "checking whether int is the fastest way to truncate""... $ac_c" 1>&6
-dnl cat >conftest.f90 <<'EOF'
-dnl program conftest
-dnl 	integer, parameter :: double=selected_real_kind(12)
-dnl 	real(double), parameter :: ulp=2.0_double**(-47)
-dnl 	real(double) :: x,y,z,ya,yb
-dnl 	integer :: t0,t1,i,timea,timeb
-dnl 
-dnl 	x=0.0_double
-dnl 	y=ulp
-dnl 	call system_clock(t0)
-dnl 	do i=2,1000000
-dnl 		z=x+y
-dnl 		x=y
-dnl 		y=z-int(z)
-dnl 	end do
-dnl 	ya=y
-dnl 	call system_clock(t1)
-dnl 	timea=t1-t0
-dnl 
-dnl 	x=0.0_double
-dnl 	y=ulp
-dnl 	call system_clock(t0)
-dnl 	do i=2,1000000
-dnl 		z=x+y
-dnl 		x=y
-dnl 		if (z.ge.1.0_double) then
-dnl 			y=z-1.0_double
-dnl 		else
-dnl 			y=z
-dnl 		end if
-dnl 	end do
-dnl 	yb=y
-dnl 	call system_clock(t1)
-dnl 	timeb=t1-t0
-dnl 
-dnl 	if (timea.lt.timeb) then
-dnl 		print '(a)','YES'
-dnl 	else
-dnl 		print '(a)','NO'
-dnl 	end if
-dnl 	print *,ya,yb
-dnl end program conftest
-dnl EOF
-dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1
-dnl if test "`./conftest | head -1`" = YES; then
-dnl 	echo "yes" 1>&6
-dnl 	AC_DEFINE(USEINT)
-dnl else
-dnl 	echo "no" 1>&6
-dnl fi
-dnl
-dnl -------------------------------------------------------------------------
-dnl -------------------------------------------------------------------------
diff --git a/fortran/config/BlankForm b/fortran/config/BlankForm
deleted file mode 100644
index 83b6ef5..0000000
--- a/fortran/config/BlankForm
+++ /dev/null
@@ -1,126 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-    CC="/some/default/compiler/named/foo -ansi"
-    CC_BASENAME=foo
-fi
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS		Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS	library suitable for use with debugging
-#			tools. Usually this list will exclude
-#			optimization switches (like `-O') and include
-#			switches that turn on symbolic debugging
-#			support (like `-g').
-#
-# PROD_CFLAGS		Flags to pass to the compiler to create a
-# PROD_CPPFLAGS		production version of the library.  These
-#			usualy exclude symbolic debugging switches
-#			(like `-g') and include optimization switches
-#			(like `-O').
-#
-# PROFILE_CFLAGS	Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS	library suitable for performance testing (like 
-# 			`-pg').  This may or may not include debugging 
-# 			or production flags.
-#			
-# CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-#			The CFLAGS should contains *something* or else 
-#			configure will probably add `-g'.  For most
-#			systems this isn't a problem but some systems
-#			will disable optimizations in favor of the
-#			`-g'.
-#			
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-    gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3 -fomit-frame-pointer"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
diff --git a/fortran/config/commence.in b/fortran/config/commence.in
deleted file mode 100644
index b3d4f6e..0000000
--- a/fortran/config/commence.in
+++ /dev/null
@@ -1,170 +0,0 @@
-##------------------------------------------------------------ -*- makefile -*-
-## The following section of this makefile comes from the
-## `./config/commence' file which was generated with config.status
-## from `./config/commence.in'.
-##-----------------------------------------------------------------------------
-
-## Things that Make needs
-.SUFFIXES:
-.SUFFIXES: .c .f90 .o .lo
-@SET_MAKE@
-
-## Directories to search
-@SEARCH@
-
-## Programs
-SHELL=/bin/sh
-CC=@CC@
-F9X=@F9X@
-F9XMODEXT=@F9XMODEXT@
-F9XMODFLAG=@F9XMODFLAG@
-FSEARCH_DIRS=@FSEARCH_DIRS@
-CFLAGS=@CFLAGS@
-CPPFLAGS=@CPPFLAGS@
-FFLAGS=@FFLAGS@
-LDFLAGS=@LDFLAGS@
-ROOT=@ROOT@
-LIBS=@LIBS@
-AR=@AR@
-RANLIB=@RANLIB@
-PERL=@PERL@
-RM=rm -f
-CP=cp
-INSTALL=@INSTALL@
-INSTALL_PROGRAM=@INSTALL_PROGRAM@
-INSTALL_DATA=@INSTALL_DATA@
-PARALLEL=@PARALLEL@
-RUNSERIAL=@RUNSERIAL@
-RUNPARALLEL=@RUNPARALLEL@
-RUNTEST=$(RUNSERIAL)
-TRACE=:
-
-## Installation points
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-bindir=@bindir@
-libdir=@libdir@
-includedir=@includedir@
-docdir=@exec_prefix@/doc
-PUB_LIB=$(LIB)
-
-## Shared libraries
-LT_STATIC_EXEC=@LT_STATIC_EXEC@
-DYNAMIC_DIRS=@DYNAMIC_DIRS@
-LT=$(top_builddir)/libtool
-LT_CCOMPILE=$(LT) --mode=compile $(CC)
-LT_LINK_CLIB=$(LT) --mode=link $(CC) $(DYNAMIC_DIRS) $(LT_STATIC_EXEC) -rpath $(libdir)
-LT_LINK_CEXE=$(LT) --mode=link $(CC) $(DYNAMIC_DIRS) -rpath $(bindir)
-LT_RUN=$(LT) --mode=execute
-LT_INSTALL_PROG=$(LT) --mode=install $(INSTALL_PROGRAM)
-LT_INSTALL_LIB=$(LT) --mode=install $(INSTALL_DATA)
-LT_UNINSTALL=$(LT) --mode=uninstall $(RM)
-
-# Fortran compilation/linking stuff
-LT_FCOMPILE=$(LT) --mode=compile $(F9X)
-LT_LINK_FLIB=$(LT) --mode=link $(F9X) -static $(DYNAMIC_DIRS)
-LT_LINK_FEXE=$(LT) --mode=link $(F9X) $(LT_STATIC_EXEC) $(DYNAMIC_DIRS)
-
-## Optional variables. We must declare them here because Irix pmake
-## complains if it sees a reference to a variable which has never been
-## defined. The main makefile is free to redefine these to something else.
-DOCDIR=$(docdir)
-EXAMPLEDIR=$(docdir)/hdf5/examples/fortran
-LIB=
-LIB_SRC=
-LIB_OBJ=
-PUB_HDR=
-PUB_PROGS=
-PROGS=
-TEST_PROGS=
-TEST_FLAGS=
-TEST_SCRIPTS=
-AUX_LIB=
-EXAMPLE_PROGS=
-SUBDIRS=
-LIBHDF5=
-
-## The default is to build the library and/or programs.  We must build
-## them sequentially.
-all:
-	$(MAKE) lib
-	$(MAKE) progs
-	$(MAKE) tests
-
-## The following rules insure that the Makefile is up-to-date by rerunning
-## various autoconf components (although not all versions of make assume
-## that the makefile is implicitly a target).  We use time stamp files to
-## keep track of the most recent update of H5config.h.in and H5config.h
-## because autoheader and config.status don't update the modification time
-## if the contents don't change.
-## Invoke it by "gmake reconfigure".
-##
-## Graphically, the dependencies are:
-##
-##		         configure.in
-##                           |  |
-##         +-----------------+  +------------+
-##         |                                 |
-##      stamp1                           configure
-##   (H5config.h.in)                         |
-##       |  |                                |
-##       |  +---------------+    +-----------+
-##       |                  |    |
-##       |               config.status
-##       |                     |
-##       |  +------------------+
-##       |  |
-##      stamp2
-##    (H5config.h)                   Makefile.in et al
-##         |                                 |
-##         +------------------+  +-----------+
-##                            |  |
-##                          Makefile
-##
-## A side effect of updating stamp1 is to generate H5config.h.in and a
-## side effect of updating stamp2 is to generate H5config.h.  When using
-## a version of make that doesn't treat the makefile as the initial target
-## the user may want to occassionally type `make Makefile' in any source
-## directory.
-## The `Makefile' target has been renamed to `reconfigure' so that the
-## autoconf and make depend processes do not start up automatically.
-## One must do `make reconfigure' explicitedly to start the process.
-## (When srcdir is used and if more than one machines are running,
-## this automatic Makefile/autoconf can get things unstable.)
-##
-STAMP1=$(top_builddir)/config/stamp1
-STAMP2=$(top_builddir)/config/stamp2
-
-MAKEFILE_PARTS=$(srcdir)/Makefile.in		\
-	       $(top_srcdir)/config/commence.in	\
-	       $(top_srcdir)/config/conclude.in	\
-	       $(top_srcdir)/config/depend1.in	\
-	       $(top_srcdir)/config/depend2.in	\
-	       $(top_srcdir)/config/depend3.in	\
-	       $(top_srcdir)/config/depend4.in	\
-	       $(top_srcdir)/config/dependN.in
-
-$(STAMP1): $(top_srcdir)/configure.in
-	touch $(STAMP1)
-	-cd $(top_srcdir); autoheader
-
-$(STAMP2): $(STAMP1) $(top_builddir)/config.status
-	touch $(STAMP2)
-	-cd $(top_builddir); \
-	   CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
-
-$(top_srcdir)/configure: $(top_srcdir)/configure.in
-	-cd $(top_srcdir); autoconf
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-	-cd $(top_builddir); ./config.status --recheck
-
-# rerun the autoconf process if any configure components have changed. 
-reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-	-cd $(top_builddir); CONFIG_HEADERS= ./config.status
-
-##-----------------------------------------------------------------------------
-## The following section of this makefile comes from the middle of
-## `Makefile.in' from this directory.  It was generated by running
-## `config.status'.
-##-----------------------------------------------------------------------------
diff --git a/fortran/config/conclude.in b/fortran/config/conclude.in
deleted file mode 100644
index 09cdf52..0000000
--- a/fortran/config/conclude.in
+++ /dev/null
@@ -1,189 +0,0 @@
-##------------------------------------------------------------ -*- makefile -*-
-## The following section of this makefile comes from the
-## `./config/conclude' file which was generated with config.status
-## from `./config/conclude.in'.
-##-----------------------------------------------------------------------------
-
-## This is the target for the library described in the main body of the
-## makefile.
-##
-lib: $(LIB)
-$(LIB) __no_library__: $(LIB_OBJ)
-	@$(LT_LINK_FLIB) -o $@ $(FFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS)
-
-progs: $(LIB) $(PROGS)
-
-## Build a tags file in this directory.
-TAGS: $(LIB_SRC)
-	$(RM) $@
-	-etags $(LIB_SRC)
-
-## Runs each test in order, passing $(TEST_FLAGS) to the program.
-tests: $(TEST_PROGS) $(LIB)
-check test _test: tests
-	@for test in $(TEST_PROGS) dummy; do                                  \
-	   if test $$test != dummy; then				      \
-	      echo "============================";			      \
-	      echo "Testing $$test $(TEST_FLAGS)";			      \
-	      echo "============================";			      \
-	      srcdir="$(srcdir)"					      \
-		 $(RUNTEST) ./$$test $(TEST_FLAGS) ||			      \
-		 exit 1;						      \
-	      echo "";							      \
-	   fi;								      \
-	done;
-	@for test in $(TEST_SCRIPTS) dummy; do                                \
-	   if test $$test != dummy; then				      \
-	      echo "============================";			      \
-	      echo "Testing $$test $(TEST_FLAGS)";			      \
-	      echo "============================";			      \
-	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
-	      srcdir="$(srcdir)"					      \
-		 /bin/sh $$test $(TEST_FLAGS) ||		              \
-		 exit 1;						      \
-	      echo "";							      \
-	   fi;								      \
-	done;
-
-## Make installation directories directories if they don't exist.
-$(libdir):
-	$(top_srcdir)/bin/mkdirs $@
-
-$(includedir):
-	$(top_srcdir)/bin/mkdirs $@
-
-$(bindir):
-	$(top_srcdir)/bin/mkdirs $@
-
-$(DOCDIR):
-	$(top_srcdir)/bin/mkdirs $@
-
-$(EXAMPLEDIR):
-	$(top_srcdir)/bin/mkdirs $@
-
-## Install the library, the public header files, and public programs.
-install: $(PUB_LIB) $(PUB_HDR) $(PUB_PROGS) $(libdir) $(includedir) $(bindir)
-	@for f in X $(PUB_LIB); do					      \
-	   if test $$f != X; then					      \
-	      (cd .libs && rm -f $(PUB_LIB)i && ln -s ../$(PUB_LIB) $(PUB_LIB)i); \
-	      ($(LT_INSTALL_LIB) $$f $(libdir)/. || exit 1);		      \
-	   fi;								      \
-	done
-	@if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then      \
-	   if test -f "hdf5.$(F9XMODEXT)" || test -f "HDF5.$(F9XMODEXT)"; then \
-	      ((cp *.$(F9XMODEXT) $(libdir)/. && chmod 644 $(libdir)/*.$(F9XMODEXT)) || exit 1); \
-	   fi;                                                                \
-	fi
-	@if test -f libhdf5_fortran.settings; then			      \
-	   (set -x; $(INSTALL_DATA) libhdf5_fortran.settings $(libdir)/. || exit 1);  \
-	fi
-	@for f in X $(PUB_HDR); do					      \
-	   if test $$f != X; then					      \
-	      if test -f $$f; then					      \
-		 (set -x; $(INSTALL_DATA) $$f $(includedir)/. || exit 1);     \
-	      else							      \
-	         (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(includedir)/. ||    \
-		    exit 1);						      \
-	      fi;							      \
-	   fi;								      \
-	done
-	@for f in X $(PUB_PROGS); do					      \
-	   if test $$f != X; then					      \
-	     ($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1);		      \
-	   fi;							              \
-	done
-
-install-examples: $(EXAMPLE_PROGS) $(EXAMPLEDIR)
-	@for f in X $(EXAMPLE_PROGS); do				      \
-	  if test $$f != X; then					      \
-	    (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);\
-	  fi;								      \
-	done
-
-uninstall-examples:
-	@if test -n "$(EXAMPLE_PROGS)"; then 				      \
-	  set -x; cd $(EXAMPLEDIR) && $(RM) $(EXAMPLE_PROGS);		      \
-	fi
-
-## Removes those things that `make install' (would have) installed.
-uninstall:
-	@for f in libhdf5_fortran.settings $(LIB); do			      \
-          $(LT_UNINSTALL) $(libdir)/$$f;				      \
-	done
-	@if test -n "$(PUB_HDR)"; then  				      \
-	  set -x; cd $(includedir) && $(RM) $(PUB_HDR);			      \
-	fi
-	@if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then	      \
-	  if test -f "$(libdir)/hdf5.$(F9XMODEXT)" -o -f "$(libdir)/HDF5.$(F9XMODEXT)"; then \
-	    set -x; $(RM) $(libdir)/*.$(F9XMODEXT);			      \
-	  fi;								      \
-	fi
-	@for f in X $(PUB_PROGS); do					      \
-	  if test $$f != X; then					      \
-	    $(LT_UNINSTALL) $(bindir)/$$f;				      \
-	  fi;								      \
-	done
-
-## Removes temporary files without removing the final target files.  That is,
-## remove things like object files but not libraries or executables.
-##
-mostlyclean:
-	@if test -n "$(LIB_OBJ)"; then                                        \
-	    $(RM) $(LIB_OBJ) $(LIB_OBJ:.lo=.o);                               \
-	fi
-	@if test -n "$(TEST_OBJ)"; then                                       \
-	    $(RM) $(TEST_OBJ) $(TEST_OBJ:.lo=.o);                             \
-	fi
-	@if test -n "$(PROG_OBJ)" || test -n "$(MOSTLYCLEAN)"; then           \
-	    $(RM) $(PROG_OBJ) $(PROG_OBJ:.lo=.o) $(MOSTLYCLEAN);              \
-	fi
-
-## Like `mostlyclean' except it also removes the final targets: things like
-## libraries and executables.  This target doesn't remove any file that
-## is part of the HDF5 distribution.
-##
-clean: mostlyclean
-	@if test -n "$(LIB)" -o -n "$(TEST_PROGS)" -o -n "$(PROGS)" -o -n "$(CLEAN)"; then \
-	    $(RM) $(LIB) $(TEST_PROGS) $(PROGS) $(CLEAN);                     \
-	fi
-	-$(RM) *.M *.a *.mod
-	-$(RM) -r .libs
-
-## Like `clean' except it also removes files that were created by running
-## configure.  If you've unpacked the source and built HDF5 without creating
-## any other files, then `make distclean' will leave only the files that were
-## in the distribution.
-##
-distclean: clean
-	-$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN)
-	@if test -f $(srcdir)/Makefile.in; then				      \
-	   (set -x; $(RM) Makefile);					      \
-	fi
-
-## Like `distclean' except it deletes all files that can be regenerated from
-## the makefile, including those generated from autoheader and autoconf.
-##
-maintainer-clean: distclean
-	-$(RM) *~ core core.* *.core *.bak *.contrib gmon.out
-
-## Implicit rules
-.c.o:
-	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
-
-.c.lo:
-	@$(LT_CCOMPILE) $(CFLAGS) $(CPPFLAGS) -c $<
-
-.f90.o:
-	$(F9X) $(FFLAGS) $(FSEARCH_DIRS) -c $<
-
-.f90.lo:
-	@$(LT_FCOMPILE) $(FFLAGS) $(FSEARCH_DIRS) -c $<
-
-##-----------------------------------------------------------------------------
-## The following section of this makefile contains dependencies between the
-## source files and the header files.
-##-----------------------------------------------------------------------------
-.PHONY: dep depend
-dep depend: $(srcdir)/Dependencies
-
-@DEPEND@
diff --git a/fortran/config/dec-flags b/fortran/config/dec-flags
deleted file mode 100644
index 9af2aae..0000000
--- a/fortran/config/dec-flags
+++ /dev/null
@@ -1,94 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file should be sourced into configure if the compiler is a DEC
-# compiler.  It is careful not to do anything if the compiler is not
-# DEC; otherwise `cc_flags_set' is set to `yes'
-#
-
-# Get the compiler version unless it's already known.
-#
-#   cc_vendor:    The compiler vendor: DEC
-#   cc_version:   Version number, like: V5.2-038
-#
-if test X = "X$cc_flags_set"; then
-    cc_vendor=DEC
-    cc_version="`$CC $CFLAGS -V 2>&1 |head -1 |\
-	        sed 's/.*DEC C \(V[0-9][-\.0-9]*\).*/\1/'`"
-    if test X != "$gcc_version"; then
-	echo "compiler '$CC' is $cc_vendor-$cc_version"
-    else
-        cc_vendor=
-    fi
-fi
-
-# Warn about old compilers that don't work right.
-case "$cc_vendor-$cc_version" in
-    DEC-V5.2-038)
-        cat <<EOF
-    **
-    ** This compiler may generate incorrect code when optimizations are
-    ** enabled. Please upgrade to a newer version (we're not sure which
-    ** version actually works) before reporting bugs to the HDF5 team.
-    **
-EOF
-	sleep 5
-	;;
-esac
-
-# Compiler flags
-case "$cc_vendor-$cc_version" in
-    DEC-V5.*)
-	# Production
-	PROD_CFLAGS="-g0 -verbose -warnprotos -std -O4 $ARCH -ansi_args -fp_reorder -readonly_strings -inline speed"
-	PROD_CPPFLAGS="-D_INTRINSICS -D_INLINE_INTRINSICS"
-
-	# Debug
-	DEBUG_CFLAGS="-g -std -verbose -warnprotos"
-	DEBUG_CPPFLAGS=
-
-	# Profile
-	PROFILE_CFLAGS="-pg -std -verbose -warnprotos"
-	PROFILE_CPPFLAGS=
-
-	# Flags are set
-	cc_flags_set=yes
-	;;
-esac
-
-# If no flags were set then clear the compiler vendor and version info.
-if test X = "X$cc_flags_set"; then
-    cc_vendor=
-    cc_version=
-fi
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the Digital UNIX architechture)
-#
-R_LARGE=18
-R_INTEGER=9
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-Olimit 2048 -std1"
-    DEBUG_FFLAGS="-Olimit 2048 -std1"
-    PROD_FFLAGS="-Olimit 2048 -std1"
-    PROFILE_FFLAGS="-Olimit 2048 -std1"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/dec-osf4.x b/fortran/config/dec-osf4.x
deleted file mode 100644
index bad4669..0000000
--- a/fortran/config/dec-osf4.x
+++ /dev/null
@@ -1,20 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for detailed information.
-
-# The default compiler is `cc'
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-
-# Try GNU compiler flags.
-. $srcdir/config/gnu-flags
-
-# Try native DEC compiler
-ARCH=${ARCH:='-arch host -tune host'}
-. $srcdir/config/dec-flags
diff --git a/fortran/config/dec-osf5.x b/fortran/config/dec-osf5.x
deleted file mode 100644
index bad4669..0000000
--- a/fortran/config/dec-osf5.x
+++ /dev/null
@@ -1,20 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for detailed information.
-
-# The default compiler is `cc'
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-
-# Try GNU compiler flags.
-. $srcdir/config/gnu-flags
-
-# Try native DEC compiler
-ARCH=${ARCH:='-arch host -tune host'}
-. $srcdir/config/dec-flags
diff --git a/fortran/config/depend b/fortran/config/depend
deleted file mode 100644
index e69de29..0000000
--- a/fortran/config/depend
+++ /dev/null
diff --git a/fortran/config/depend1.in b/fortran/config/depend1.in
deleted file mode 100644
index eaa7488..0000000
--- a/fortran/config/depend1.in
+++ /dev/null
@@ -1,51 +0,0 @@
-##                                                             -*- makefile -*-
-
-## We keep a list of dependencies in `.depend' for each of the source
-## files on which it depends.  When one of the source files is modified
-## we remove its record from .depend and regenerate its dependencies,
-## tacking them onto the end of .depend.  By including the .depend file
-## into the makefile, we're telling make that the makefile depends on
-## the dependency list in the .depend file.
-##
-## This is as fast as the `.d' method described in the GNU make manual
-## for automatic dependencies, but has the added advantage that all
-## dependencies are stored in one place.  The advantage over the
-## `makedepend' program is that only those files that are out of date
-## have dependency information rebuilt, and the Makefile is not
-## modified.
-##
-## This is also where tracing information is updated.  The $(TRACE)
-## program is run on each source file to make sure that the H5TRACE()
-## macros are up to date.  If they are then the file is not modified,
-## otherwise the file is changed and a backup is saved by appending a
-## tilde to the file name.
-##
-$(srcdir)/Dependencies: .depend
-	@if test "$(srcdir)" != "."; then                                     \
-      echo '## This file is machine generated on GNU systems.' >$@;       \
-      echo '## Only temporary changes may be made here.' >>$@;            \
-      echo >>$@;                                                          \
-      $(PERL) -p $(top_srcdir)/bin/distdep .depend >>$@;                  \
-    else                                                                  \
-      echo 'Dependencies cannot be built when $$srcdir == $$builddir';    \
-    fi
-
-.depend: $(LIB_SRC) $(TEST_SRC) $(PROG_SRC)
-	@touch .depend
-	@for dep in $? dummy; do                                              \
-      if test $$dep != "dummy" -a -n "$(PERL)"; then                      \
-        case "$$dep" in                                                   \
-          *.c)                                                            \
-            echo Building dependencies for $$dep;                         \
-            obj=`basename $$dep .c`.lo;                                   \
-            sed '\%^'"$$obj"':%,\%[^\\]$$%d' <$@ >$@- && mv $@- $@;       \
-            $(TRACE) $$dep;                                               \
-            $(CC) -MM -MG $(CPPFLAGS) $$dep 2>/dev/null >>$@;             \
-            $(PERL) -w $(top_srcdir)/bin/dependencies --srcdir=$(srcdir) --top_srcdir=$(top_srcdir) --top_builddir=$(top_builddir) $@; \
-            ;;                                                            \
-        esac;                                                             \
-      fi;                                                                 \
-    done
-
--include .depend
-
diff --git a/fortran/config/depend2.in b/fortran/config/depend2.in
deleted file mode 100644
index f67914f..0000000
--- a/fortran/config/depend2.in
+++ /dev/null
@@ -1,11 +0,0 @@
-##							       -*- makefile -*-
-
-## This platform doesn't support automatic dependencies because we're
-## not using GNU gcc.  GNU gcc is needed in order to generate the list
-## of header files included by a source file.
-
-## Since automatic dependencies are not being used, we attempt to include the
-## `.distdep' file from the source tree. This file was automatically generated 
-## on some system that satisfies the above requirements.
-
--include $(srcdir)/Dependencies
diff --git a/fortran/config/depend3.in b/fortran/config/depend3.in
deleted file mode 100644
index e856bc5..0000000
--- a/fortran/config/depend3.in
+++ /dev/null
@@ -1,7 +0,0 @@
-##							       -*- makefile -*-
-
-## Since automatic dependencies are not being used, we attempt to include the
-## `.distdep' file from the source tree. This file was automatically generated 
-## on some system that satisfies the above requirements.
-
-.include <$(srcdir)/Dependencies>
diff --git a/fortran/config/depend4.in b/fortran/config/depend4.in
deleted file mode 100644
index b0324d9..0000000
--- a/fortran/config/depend4.in
+++ /dev/null
@@ -1,7 +0,0 @@
-##							       -*- makefile -*-
-
-## Since automatic dependencies are not being used, we attempt to include the
-## `.distdep' file from the source tree. This file was automatically generated 
-## on some system that satisfies the above requirements.
-
-include $(srcdir)/Dependencies
diff --git a/fortran/config/dependN.in b/fortran/config/dependN.in
deleted file mode 100644
index 7ece270..0000000
--- a/fortran/config/dependN.in
+++ /dev/null
@@ -1,4 +0,0 @@
-##							       -*- makefile -*-
-
-## Automatic dependencies are not being used and we cannot include other
-## files.
diff --git a/fortran/config/freebsd b/fortran/config/freebsd
deleted file mode 100644
index 8608a85..0000000
--- a/fortran/config/freebsd
+++ /dev/null
@@ -1,21 +0,0 @@
-#							-*- shell-script -*-
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# The default compiler is `gcc'
-if test "X-" = "X-$CC"; then
-    CC=gcc
-    CC_BASENAME=gcc
-fi
-
-# Architecture-specific flags
-ARCH=
-
-# Omit frame pointer for optimized code?
-NOFP=${NOFP:=-fomit-frame-pointer}
-
-# Figure out compiler flags
-. $srcdir/config/gnu-flags
diff --git a/fortran/config/gnu-flags b/fortran/config/gnu-flags
deleted file mode 100644
index a14d70e..0000000
--- a/fortran/config/gnu-flags
+++ /dev/null
@@ -1,227 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file should be sourced into configure if the compiler is the
-# GNU gcc compiler or a derivative.  It is careful not to do anything
-# if the compiler is not GNU; otherwise `cc_flags_set' is set to `yes'
-#
-
-# Get the compiler version in a way that works for gcc, egcs, and
-# pgcc unless a compiler version is already known
-#
-#   cc_vendor:    The compiler name: gcc, egcs, or pgcc
-#   cc_version:   Version number: 2.91.60, 2.7.2.1
-#
-if test X = "X$cc_flags_set"; then
-    cc_version="`$CC $CFLAGS -v 2>&1 |grep 'gcc version' |\
-	        sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`"
-    cc_vendor=`echo $cc_version |sed 's/\([a-z]*\).*/\1/'`
-    cc_version=`echo $cc_version |sed 's/[-a-z]//g'`
-    if test X = "X$cc_vendor" -a X != "X$cc_version"; then
-	cc_vendor=gcc
-    fi
-    if test "-" != "$cc_vendor-$cc_version"; then
-	echo "compiler '$CC' is GNU $cc_vendor-$cc_version"
-    fi
-
-    # Some version numbers
-    cc_vers_major=`echo $cc_version | cut -f1 -d.`
-    cc_vers_minor=`echo $cc_version | cut -f2 -d.`
-    cc_vers_patch=`echo $cc_version | cut -f3 -d.`
-    test -n "$cc_vers_major" || cc_vers_major=0
-    test -n "$cc_vers_minor" || cc_vers_minor=0
-    test -n "$cc_vers_patch" || cc_vers_patch=0
-    cc_vers_all=`expr $cc_vers_major '*' 1000000 + $cc_vers_minor '*' 1000 + $cc_vers_patch`
-fi
-
-# GCC compilers before gcc-2.8.1 have problems with `long long'.
-if test gcc = "$cc_vendor" -a "$cc_vers_all" -lt 2008001; then
-    cat <<EOF
-    **
-    ** This compiler may be unable to properly compile the long long
-    ** data type used extensively by hdf5, although specifying
-    ** --disable-hsizet for configure may work around those bugs.
-    ** There may be other code generation problems also, especially
-    ** when optimizations are enabled.  Please upgrade to at least GNU
-    ** gcc version 2.8.1 before reporting bugs to the HDF5 team.
-    **
-EOF
-    sleep 5
-
-# Current EGCS compilers have problems with `long long' and register
-# allocation when optimizations are turned on for x86 systems.
-elif test egcs = "$cc_vendor" -a "$cc_vers_all" -le 2091066; then
-    cat <<EOF
-    **
-    ** This compiler may have problems allocating registers when
-    ** optimizations are enabled on some platforms. Specifying
-    ** --disable-hsizet usually avoids the bug.
-    **
-EOF
-    sleep 5
-
-# All current versions of PGCC have problems also.
-elif test pgcc = "$cc_vendor" -a "$cc_vers_all" -le 2091066; then	    
-    cat <<EOF
-    **
-    ** This compiler may have problems allocating registers for long
-    ** long data types when optimizations are enabled. There may be
-    ** other code generation problems as well. We know of no version
-    ** of pgcc which is capable of compiling HDF5 in production mode.
-    ** Please use gcc-2.8 or egcs-1.1.1 before reporting bugs.
-    **
-EOF
-    sleep 5
-
-fi
-
-# Architecture-specific flags
-case "$host_os-$host_cpu" in
-    # FreeBSD sets the information from "hostname -m" to the general machine
-    # architecture, not the specific CPU for the machine, so even our
-    # Pentium II Xeon server is set to "i386".  Once we know we are on a FreeBSD
-    # machine, use the "sysctl" command to get the CPU hardware model.
-    freebsd*)
-        host_cpu_model=`sysctl -n hw.model`
-        case "$host_cpu_model" in
-            # Hmm.. this might not catch Celerons, but it won't hurt them either...
-            *Pro*|*II*)
-                # This check should be kept in sync with the *-i686 check below
-                case "$cc_vendor-$cc_version" in
-                    gcc-2.95*)
-                        ARCH=${ARCH:="-march=i686 -malign-double"}
-                        ;;
-                    gcc-*|egcs-*|pgcc-*)
-                        ARCH=${ARCH:="-mcpu=pentiumpro -march=pentiumpro -malign-double"}
-                        ;;
-                esac
-            ;;
-        esac
-        ;;
-
-    *-i686)
-        case "$cc_vendor-$cc_version" in
-            gcc-2.95*)
-                ARCH=${ARCH:="-march=i686 -malign-double"}
-                ;;
-            gcc-*|egcs-*|pgcc-*)
-                ARCH=${ARCH:="-mcpu=pentiumpro -march=pentiumpro -malign-double"}
-                ;;
-        esac
-        ;;
-esac
-
-# Host-specific flags
-case "`hostname`" in
-    hawkwind.ncsa.uiuc.edu)
-        ARCH="$ARCH -pipe"
-        ;;
-esac
-
-# Compiler flags
-case "$cc_vendor-$cc_version" in
-    gcc-2.7*)
-	# General
-	CFLAGS="$CFLAGS $ARCH -ansi"
-
-	# Production
-	PROC_CFLAGS="-O3 $NOFP -finline-functions -Wno-shadow"
-	PROD_CPPFLAGS=
-
-	# Debug
-	DEBUG_CFLAGS="-g -fverbose-asm -Wno-shadow"
-	DEBUG_CPPFLAGS=
-
-	# Profile
-	PROFILE_CFLAGS=-pg
-	PROFILE_CPPFLAGS=
-
-	# Flags are set
-	cc_flags_set=yes
-	;;
-
-    gcc-2.8.*)
-        # General
-        CFLAGS="$CFLAGS $ARCH -Wsign-compare"
-
-	# Production
-	PROD_CFLAGS="-O3 $NOFP -finline-functions -fschedule-insns2 -Wno-shadow"
-	PROD_CPPFLAGS=
-
-	# Debug
-	DEBUG_CFLAGS="-g -fverbose-asm -Wno-shadow"
-	DEBUG_CPPFLAGS=
-
-	# Profile
-	PROFILE_CFLAGS=-pg
-	PROFILE_CPPFLAGS=
-
-	# Flags are set
-	cc_flags_set=yes
-	;;
-
-    gcc-2.95*)
-	# General
-	CFLAGS="$CFLAGS $ARCH -Wsign-compare"
-
-	# Production
-	PROD_CFLAGS="-O6 $NOFP -Wno-shadow"
-	PROD_CPPFLAGS=
-
-	# Debug
-	DEBUG_CFLAGS="-g -fverbose-asm -Wno-shadow"
-	DEBUG_CPPFLAGS=
-
-	# Profile
-	PROFILE_CFLAGS=-pg
-	PROFILE_CPPFLAGS=
-
-	# Flags are set
-	cc_flags_set=yes
-	;;
-
-    egcs-2.*|pgcc-2.*)
-	# General
-	CFLAGS="$CFLAGS $ARCH -Wsign-compare"
-
-	# Production
-	PROD_CFLAGS="-O6 $NOFP -Wno-shadow"
-	PROD_CPPFLAGS=
-
-	# Debug
-	DEBUG_CFLAGS="-g -fverbose-asm -Wno-shadow"
-	DEBUG_CPPFLAGS=
-
-	# Profile
-	PROFILE_CFLAGS=-pg
-	PROFILE_CPPFLAGS=
-
-	# Flags are set
-	cc_flags_set=yes
-	;;
-
-    gcc-*|egcs-*|pgcc-*)
-        # This must be some other GNU compiler that we don't know about.
-        # Just use fairly generic flags.
-
-	# Production
-	PROD_CFLAGS=-O
-	PROD_CPPFLAGS=
-
-	# Debug
-	DEBUG_CFLAGS=-g
-	DEBUG_CPPFLAGS=
-
-	# Profile
-	PROFILE_CFLAGS=-pg
-	PROFILE_CPPFLAGS=
-
-	# Flags are set
-	cc_flags_set=yes
-	;;
-esac
-
-# Clear cc info if no flags set
-if test X = "X$cc_flags_set"; then
-    cc_vendor=
-    cc_version=
-fi
diff --git a/fortran/config/hpux10.20 b/fortran/config/hpux10.20
deleted file mode 100644
index 97022c4..0000000
--- a/fortran/config/hpux10.20
+++ /dev/null
@@ -1,68 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# Default compiler is `cc'
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-
-# Flags
-case "X-$CC" in
-    X-gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -Ae"
-	DEBUG_CFLAGS=-g
-	DEBUG_CPPFLAGS="-Ae"
-	PROD_CFLAGS=-O
-	PROD_CPPFLAGS="-Ae"
-	PROFILE_CFLAGS=
-	PROFILE_CPPFLAGS="-Ae"
-	;;
-esac
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the HPUX architechture)
-#
-R_LARGE=18
-R_INTEGER=9
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_INTEGER)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-O"
-    DEBUG_FFLAGS="-O"
-    PROD_FFLAGS="-O"
-    PROFILE_FFLAGS="-O"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/hpux11.00 b/fortran/config/hpux11.00
deleted file mode 100644
index 97022c4..0000000
--- a/fortran/config/hpux11.00
+++ /dev/null
@@ -1,68 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# Default compiler is `cc'
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-
-# Flags
-case "X-$CC" in
-    X-gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -Ae"
-	DEBUG_CFLAGS=-g
-	DEBUG_CPPFLAGS="-Ae"
-	PROD_CFLAGS=-O
-	PROD_CPPFLAGS="-Ae"
-	PROFILE_CFLAGS=
-	PROFILE_CPPFLAGS="-Ae"
-	;;
-esac
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the HPUX architechture)
-#
-R_LARGE=18
-R_INTEGER=9
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_INTEGER)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-O"
-    DEBUG_FFLAGS="-O"
-    PROD_FFLAGS="-O"
-    PROFILE_FFLAGS="-O"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/hpux9.03 b/fortran/config/hpux9.03
deleted file mode 100644
index abed0b3..0000000
--- a/fortran/config/hpux9.03
+++ /dev/null
@@ -1,36 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details
-
-# Default compiler is `cc'
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-
-# Flags
-case "X-$CC" in
-    X-gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -Ae"
-	DEBUG_CFLAGS=-g
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS=
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS=
-	PROFILE_CPPFLAGS=
-	;;
-esac
diff --git a/fortran/config/i386-pc-cygwin32 b/fortran/config/i386-pc-cygwin32
deleted file mode 100644
index 4054819..0000000
--- a/fortran/config/i386-pc-cygwin32
+++ /dev/null
@@ -1,20 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# The default compiler is `gcc'.
-if test "X-" =  "X-$CC"; then
-    CC=gcc
-    CC_BASENAME=gcc
-    LD=ld
-fi
-
-# Omit frame pointer for optimized code?
-NOFP=${NOFP:=-fomit-frame-pointer}
-
-# Figure out compiler flags
-. $srcdir/config/gnu-flags
diff --git a/fortran/config/ia64-linux-gnu b/fortran/config/ia64-linux-gnu
deleted file mode 100644
index b868dc4..0000000
--- a/fortran/config/ia64-linux-gnu
+++ /dev/null
@@ -1,94 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-# Use Intel C & Fortran compiler by default.
-if test "X-" =  "X-$CC"; then
-    CC=ecc
-    CC_BASENAME=ecc
-fi
-if test "X-" =  "X-$F9X"; then
-    F9X=efc
-fi
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-
-case $CC_BASENAME in
-    ecc)
-	# CFLAGS must be set else configure set it to -g
-	CFLAGS="$CFLAGS"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	# ecc has -O2 as default
-	PROD_CFLAGS=""
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS=""	# ecc has no profile option
-	PROFILE_CPPFLAGS=
-	;;
-
-    gcc)
-	. $srcdir/config/gnu-flags
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-#       R_LARGE is the number of digits for the bigest integer supported.
-#       R_INTEGER is the number of digits in INTEGER
-#
-# (for the Linux architechture)
-#
-
-R_LARGE=18
-R_INTEGER=9
-
-case $F9X in
-    *efc)
-	# this is for efc v7.  Older efc do not work with these.
-	# -Vaxlib is for non-standard fortran calls like exit().
-	FFLAGS='-fpp -DDEC$=DEC_ -DMS$=MS_ -Vaxlib'
-	HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-	HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-	HID_T='SELECTED_INT_KIND(R_INTEGER)'
-	SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-	OBJECT_NAMELEN_DEFAULT_F=-1
-	f9x_flags_set=yes
-	;;
-    *)
-	HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-	HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-	HID_T='SELECTED_INT_KIND(R_INTEGER)'
-	SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-	OBJECT_NAMELEN_DEFAULT_F=-1
-	f9x_flags_set=yes
-	;;
-esac
-
-# The following is not right and need work.
-if test -z "$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS=""
-    DEBUG_FFLAGS=""
-    PROD_FFLAGS=""
-    PROFILE_FFLAGS=""
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/intel-osf1 b/fortran/config/intel-osf1
deleted file mode 100644
index 0b50c4f..0000000
--- a/fortran/config/intel-osf1
+++ /dev/null
@@ -1,83 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# This is for the ASCI RED TFLOPS machine
-
-# The default compiler is `cicc'
-if test "X-" =  "X-$CC"; then
-    CC=cicc
-    CC_BASENAME=cicc
-fi
-
-# The default archiver is `xar'
-AR=${AR:-xar}
-
-# There is no ranlib
-RANLIB=:
-
-# Additional libraries
-LDFLAGS="$LDFLAGS -lnoop_stubs"
-
-# How to run serial and parallel test programs
-RUNSERIAL="yod -sz 1"
-RUNPARALLEL="yod -sz 8"
-
-# What must *always* be present for things to compile correctly?
-#CPPFLAGS="$CPPFLAGS -I."
-
-# What compiler flags should be used for code development?
-DEBUG_CFLAGS=-g
-DEBUG_CPPFLAGS=
-
-# What compiler flags should be used for building a production
-# library?
-PROD_CFLAGS=-O
-PROD_CPPFLAGS=
-
-# What compiler flags enable code profiling?
-PROFILE_CFLAGS=-pg
-PROFILE_CPPFLAGS=
-
-# Turn off shared lib option.  It does not work for TFLOPS yet.
-enable_shared="${enable_shared:-no}"
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# Hard set sizeof_intN_t to 0 because they are not supported.
-ac_cv_sizeof_int8_t=${ac_cv_sizeof_int8_t='0'}
-ac_cv_sizeof_int16_t=${ac_cv_sizeof_int16_t='0'}
-ac_cv_sizeof_int32_t=${ac_cv_sizeof_int32_t='0'}
-ac_cv_sizeof_int64_t=${ac_cv_sizeof_int64_t='0'}
-ac_cv_sizeof_uint8_t=${ac_cv_sizeof_uint8_t='0'}
-ac_cv_sizeof_uint16_t=${ac_cv_sizeof_uint16_t='0'}
-ac_cv_sizeof_uint32_t=${ac_cv_sizeof_uint32_t='0'}
-ac_cv_sizeof_uint64_t=${ac_cv_sizeof_uint64_t='0'}
-
-# Hard set sizeof_int_leastN_t to 0 because they are not supported.
-ac_cv_sizeof_int_least8_t=${ac_cv_sizeof_int_least8_t='0'}
-ac_cv_sizeof_int_least16_t=${ac_cv_sizeof_int_least16_t='0'}
-ac_cv_sizeof_int_least32_t=${ac_cv_sizeof_int_least32_t='0'}
-ac_cv_sizeof_int_least64_t=${ac_cv_sizeof_int_least64_t='0'}
-ac_cv_sizeof_uint_least8_t=${ac_cv_sizeof_uint_least8_t='0'}
-ac_cv_sizeof_uint_least16_t=${ac_cv_sizeof_uint_least16_t='0'}
-ac_cv_sizeof_uint_least32_t=${ac_cv_sizeof_uint_least32_t='0'}
-ac_cv_sizeof_uint_least64_t=${ac_cv_sizeof_uint_least64_t='0'}
-
-# Hard set sizeof_int_fastN_t to 0 because they are not supported.
-ac_cv_sizeof_int_fast8_t=${ac_cv_sizeof_int_fast8_t='0'}
-ac_cv_sizeof_int_fast16_t=${ac_cv_sizeof_int_fast16_t='0'}
-ac_cv_sizeof_int_fast32_t=${ac_cv_sizeof_int_fast32_t='0'}
-ac_cv_sizeof_int_fast64_t=${ac_cv_sizeof_int_fast64_t='0'}
-ac_cv_sizeof_uint_fast8_t=${ac_cv_sizeof_uint_fast8_t='0'}
-ac_cv_sizeof_uint_fast16_t=${ac_cv_sizeof_uint_fast16_t='0'}
-ac_cv_sizeof_uint_fast32_t=${ac_cv_sizeof_uint_fast32_t='0'}
-ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t='0'}
-
diff --git a/fortran/config/irix5.x b/fortran/config/irix5.x
deleted file mode 100644
index bd757e1..0000000
--- a/fortran/config/irix5.x
+++ /dev/null
@@ -1,50 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details
-
-# The default compiler is `cc' and there is no ranlib.
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-RANLIB=:
-
-case "X-$CC_BASENAME" in
-    X-gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-        # Do *not* use -ansi because it prevents hdf5 from being able
-        # to read modification dates from the file. On some systems it
-        # can also result in compile errors in system header files
-        # since hdf5 includes a couple non-ANSI header files.
-        #CFLAGS="$CFLAGS -ansi"
-
-	# Always turn off these compiler warnings:
-        CFLAGS="$CFLAGS -woff 799"
-
-	# Extra debugging flags
-	DEBUG_CFLAGS=-g
-	DEBUG_CPPFLAGS=
-
-	# Extra production flags
-	# Note: higher optimizations relax alignment requirements needed.
-	PROD_CFLAGS="-O -s"
-	PROD_CPPFLAGS=
-
-	# Extra profiling flags
-	PROFILE_CFLAGS=-pg
-	PROFILE_CPPFLAGS=
-	;;
-esac
diff --git a/fortran/config/irix6.x b/fortran/config/irix6.x
deleted file mode 100644
index 10c48cf..0000000
--- a/fortran/config/irix6.x
+++ /dev/null
@@ -1,127 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# Use SGI supplied C compiler by default.  There is no ranlib
-if test "X-" =  "X-$CC"; then
-    CC='cc'
-    CC_BASENAME=cc
-fi
-RANLIB=:
-
-# Compiler flags
-case "X-$CC_BASENAME" in
-    X-gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-        # Check for old versions of the compiler that don't work right.
-        case "`$CC -version 2>&1 |head -1`" in
-	    "Mongoose Compilers: Version 7.00")
-		echo "  +---------------------------------------------------+"
-		echo "  | You have an old version of cc (Mongoose Compilers |"
-		echo "  | version 7.00).  Please upgrade to MIPSpro version |"
-		echo "  | 7.2.1.2m (patches are available from the SGI web  |"
-		echo "  | site).  The 7.00 version may generate incorrect   |"
-		echo "  | code, especially when optimizations are enabled.  |"
-		echo "  +---------------------------------------------------+"
-		sleep 5
-		;;
-	esac
-
-	# Do *not* use -ansi because it prevents hdf5 from being able
-	# to read modification dates from the file. On some systems it
-	# can also result in compile errors in system header files
-	# since hdf5 includes a couple non-ANSI header files.
-	#CFLAGS="$CFLAGS -ansi"
-
-	# Always turn off these compiler warnings for the -64 compiler:
-	#    1174:  function declared but not used
-	#    1196:  __vfork() (this is an SGI config problem)
-	#    1209:  constant expressions
-	#    1429:  the `long long' type is not standard
-	#    1685:  turn off warnings about turning off invalid warnings
-	#    3201:  remark - parameter not referenced
-	CFLAGS="$CFLAGS -woff 1174,1429,1209,1196,1685,3201"
-
-	# Always turn off these compiler warnings for the old compiler:
-	#    799:   the `long long' type is not standard
-	#    803:   turn off warnings about turning off invalid warnings
-	#    835:   __vfork() (this is an SGI config problem)
-	CFLAGS="$CFLAGS -woff 799,803,835"
-
-	# Always turn off these loader warnings:
-	# (notice the peculiar syntax)
-	#      47:  branch instructions that degrade performance on R4000
-	#      84:  a library is not used
-	#      85:  duplicate definition preemption (from -lnsl)
-	#     134:  duplicate weak definition preemption (from -lnsl)
-	CFLAGS="$CFLAGS -Wl,-woff,47,-woff,84,-woff,85,-woff,134"
-
-	# Extra debugging flags
-	DEBUG_CFLAGS="-g -fullwarn"
-	DEBUG_CPPFLAGS=
-
-	# Extra production flags
-	PROD_CFLAGS="-64 -mips4 -O -s"
-	PROD_CPPFLAGS=
-
-	# Extra profiling flags
-	PROFILE_CFLAGS=-pg
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-# Use SGI supplied C compiler by default.  There is no ranlib
-if test "X-" =  "X-$F9X"; then
-    F9X="f90"
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-64 -mips4 -O -s"
-    DEBUG_FFLAGS="-64 -mips4 -O -s"
-    PROD_FFLAGS="-64 -mips4 -O -s"
-    PROFILE_FFLAGS="-64 -mips4 -O -s"
-fi
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the IRIX architechture)
-#
-R_LARGE=18
-R_INTEGER=9
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-64 -mips4 -O -s"
-    DEBUG_FFLAGS="-64 -mips4 -O -s"
-    PROD_FFLAGS="-64 -mips4 -O -s"
-    PROFILE_FFLAGS="-64 -mips4 -O -s"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/linux-gnu b/fortran/config/linux-gnu
deleted file mode 100644
index d139966..0000000
--- a/fortran/config/linux-gnu
+++ /dev/null
@@ -1,4 +0,0 @@
-#							-*- shell-script -*-
-# This is the same as linux-gnulibc1
-
-. $srcdir/config/linux-gnulibc1
diff --git a/fortran/config/linux-gnuaout b/fortran/config/linux-gnuaout
deleted file mode 100644
index d139966..0000000
--- a/fortran/config/linux-gnuaout
+++ /dev/null
@@ -1,4 +0,0 @@
-#							-*- shell-script -*-
-# This is the same as linux-gnulibc1
-
-. $srcdir/config/linux-gnulibc1
diff --git a/fortran/config/linux-gnulibc1 b/fortran/config/linux-gnulibc1
deleted file mode 100644
index 7ecead5..0000000
--- a/fortran/config/linux-gnulibc1
+++ /dev/null
@@ -1,51 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# The default compiler is `gcc'.
-if test -z "$CC"; then
-    CC=gcc
-    CC_BASENAME=gcc
-fi
-
-# Omit frame pointer for optimized code?
-NOFP=${NOFP:=-fomit-frame-pointer}
-
-# Figure out compiler flags
-. $srcdir/config/gnu-flags
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the Linux architechture)
-#
-R_LARGE=18
-R_INTEGER=9
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_INTEGER)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test -z "$F9X"; then
-    F9X=pgf90
-fi
-
-if test -z "$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS=""
-    DEBUG_FFLAGS=""
-    PROD_FFLAGS=""
-    PROFILE_FFLAGS=""
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/linux-gnulibc2 b/fortran/config/linux-gnulibc2
deleted file mode 100644
index 4551fb6..0000000
--- a/fortran/config/linux-gnulibc2
+++ /dev/null
@@ -1,10 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# Same as with gnulibc1 for now
-. $srcdir/config/linux-gnulibc1
diff --git a/fortran/config/powerpc-ibm-aix4.x b/fortran/config/powerpc-ibm-aix4.x
deleted file mode 100644
index 5124107..0000000
--- a/fortran/config/powerpc-ibm-aix4.x
+++ /dev/null
@@ -1,44 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# Cross compiling defaults
-ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the AIX architechture)
-#
-R_LARGE=18
-R_INTEGER=9
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_INTEGER)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=xlf
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG="-qsuffix=f=f90"
-    FFLAGS="-static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k"
-    FSEARCH_DIRS="-I./ -I../src"
-    DEBUG_FFLAGS="-O"
-    PROD_FFLAGS="-O"
-    PROFILE_FFLAGS="-O"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/powerpc-ibm-aix5.x b/fortran/config/powerpc-ibm-aix5.x
deleted file mode 100644
index 9b9a4d1..0000000
--- a/fortran/config/powerpc-ibm-aix5.x
+++ /dev/null
@@ -1,96 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-# Use AIX supplied C compiler by default, xlc for serial, mpcc_r for parallel.
-# Use -D_LARGE_FILES by default to support large file size.
-if test "X-" =  "X-$CC"; then
-  if test "X-$enable_parallel" = "X-yes"; then
-    CC='mpcc_r -qlanglvl=ansi -D_LARGE_FILES'
-    CC_BASENAME=mpcc_r
-  else
-    CC='xlc -qlanglvl=ansi -D_LARGE_FILES'
-    CC_BASENAME=xlc
-  fi
-fi
-
-# Define RUNPARALLEL if parallel mode is enabled or a parallel compiler used.
-if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpcc_r; then
-    RUNPARALLEL=${RUNPARALLEL="MP_PROCS=\$\${NPROCS:=3} MP_TASKS_PER_NODE=\$\${NPROCS:=3} poe"}
-fi
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-
-case $CC_BASENAME in
-    xlc|mpcc_r)
-	# Turn off shared lib option.  It causes some test suite to fail.
-	enable_shared="${enable_shared:-no}"
-	# CFLAGS must be set else configure set it to -g
-	CFLAGS="$CFLAGS"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	# -O causes test/dtypes to fail badly. Turn it off for now.
-	PROD_CFLAGS=""
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    gcc)
-	. $srcdir/config/gnu-flags
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the AIX architechture)
-#
-R_LARGE=18
-R_INTEGER=9
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_INTEGER)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-  if test "X-$enable_parallel" = "X-yes"; then
-    F9X=mpxlf_r
-  else
-    F9X=xlf
-  fi
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG="-qsuffix=f=f90"
-    FFLAGS="-static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k"
-    FSEARCH_DIRS="-I./ -I../src"
-    DEBUG_FFLAGS="-O"
-    PROD_FFLAGS="-O"
-    PROFILE_FFLAGS="-O"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/rs6000-ibm-aix4.x b/fortran/config/rs6000-ibm-aix4.x
deleted file mode 100644
index 5124107..0000000
--- a/fortran/config/rs6000-ibm-aix4.x
+++ /dev/null
@@ -1,44 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details.
-
-# Cross compiling defaults
-ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the AIX architechture)
-#
-R_LARGE=18
-R_INTEGER=9
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_INTEGER)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=xlf
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG="-qsuffix=f=f90"
-    FFLAGS="-static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k"
-    FSEARCH_DIRS="-I./ -I../src"
-    DEBUG_FFLAGS="-O"
-    PROD_FFLAGS="-O"
-    PROFILE_FFLAGS="-O"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/solaris2.x b/fortran/config/solaris2.x
deleted file mode 100644
index 52df28e..0000000
--- a/fortran/config/solaris2.x
+++ /dev/null
@@ -1,64 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-#
-# See BlankForm in this directory for details
-
-# The default compiler is `sunpro cc'
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-
-# Try gcc compiler flags
-. $srcdir/config/gnu-flags
-
-# Try solaris native compiler flags
-if test "X-" = "X-$cc_flags_set"; then
-    CFLAGS="-erroff=%none"
-    DEBUG_CFLAGS=-g
-    DEBUG_CPPFLAGS=
-    PROD_CFLAGS="-O -s"
-    PROD_CPPFLAGS=
-    PROFILE_CFLAGS=-xpg
-    PROFILE_CPPFLAGS=
-    cc_flags_set=yes
-    # Turn off optimization flag for SUNpro compiler versions 4.x which
-    # have an optimization bug.  Version 5.0 works.
-    ($CC -V 2>&1) | grep -s 'cc: .* C 4\.' >/dev/null 2>&1 \
-	&& PROD_CFLAGS="`echo $PROD_CFLAGS | sed -e 's/-O//'`"
-fi
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the Sparc Solaris architechture)
-#
-R_LARGE=18
-R_INTEGER=9
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_INTEGER)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS=""
-    DEBUG_FFLAGS=""
-    PROD_FFLAGS=""
-    PROFILE_FFLAGS=""
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/sv1-cray b/fortran/config/sv1-cray
deleted file mode 100644
index e2a4baf..0000000
--- a/fortran/config/sv1-cray
+++ /dev/null
@@ -1,170 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS		Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS	library suitable for use with debugging
-#			tools. Usually this list will exclude
-#			optimization switches (like `-O') and include
-#			switches that turn on symbolic debugging
-#			support (like `-g').
-#
-# PROD_CFLAGS		Flags to pass to the compiler to create a
-# PROD_CPPFLAGS		production version of the library.  These
-#			usualy exclude symbolic debugging switches
-#			(like `-g') and include optimization switches
-#			(like `-O').
-#
-# PROFILE_CFLAGS	Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS	library suitable for performance testing (like 
-# 			`-pg').  This may or may not include debugging 
-# 			or production flags.
-#			
-# CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-#			The CFLAGS should contains *something* or else 
-#			configure will probably add `-g'.  For most
-#			systems this isn't a problem but some systems
-#			will disable optimizations in favor of the
-#			`-g'.
-#			
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-    gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3 -fomit-frame-pointer"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    cc)
-	CFLAGS="$CFLAGS"
-	DEBUG_CFLAGS="-g -h zero"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O2 -h scalar0"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the UNICOS architechture)
-#
-R_LARGE=18
-R_INTEGER=18
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-dp"
-    DEBUG_FFLAGS="-dp"
-    PROD_FFLAGS="-dp"
-    PROFILE_FFLAGS="-dp"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/unicos b/fortran/config/unicos
deleted file mode 100644
index 541bd78..0000000
--- a/fortran/config/unicos
+++ /dev/null
@@ -1,168 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS		Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS	library suitable for use with debugging
-#			tools. Usually this list will exclude
-#			optimization switches (like `-O') and include
-#			switches that turn on symbolic debugging
-#			support (like `-g').
-#
-# PROD_CFLAGS		Flags to pass to the compiler to create a
-# PROD_CPPFLAGS		production version of the library.  These
-#			usualy exclude symbolic debugging switches
-#			(like `-g') and include optimization switches
-#			(like `-O').
-#
-# PROFILE_CFLAGS	Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS	library suitable for performance testing (like 
-# 			`-pg').  This may or may not include debugging 
-# 			or production flags.
-#			
-# CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-#			The CFLAGS should contains *something* or else 
-#			configure will probably add `-g'.  For most
-#			systems this isn't a problem but some systems
-#			will disable optimizations in favor of the
-#			`-g'.
-#			
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-    gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
-	PROD_CFLAGS="-O3 -fomit-frame-pointer"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    cc)
-	CFLAGS="$CFLAGS"
-	DEBUG_CFLAGS="-g -h zero -h scalar0"
-	DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
-	PROD_CFLAGS="-O2 -h scalar0"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the UNICOS architechture)
-#
-R_LARGE=18
-R_INTEGER=18
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-dp"
-    DEBUG_FFLAGS="-dp"
-    PROD_FFLAGS="-dp"
-    PROFILE_FFLAGS="-dp"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/unicos10.0.X b/fortran/config/unicos10.0.X
deleted file mode 100644
index 541bd78..0000000
--- a/fortran/config/unicos10.0.X
+++ /dev/null
@@ -1,168 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS		Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS	library suitable for use with debugging
-#			tools. Usually this list will exclude
-#			optimization switches (like `-O') and include
-#			switches that turn on symbolic debugging
-#			support (like `-g').
-#
-# PROD_CFLAGS		Flags to pass to the compiler to create a
-# PROD_CPPFLAGS		production version of the library.  These
-#			usualy exclude symbolic debugging switches
-#			(like `-g') and include optimization switches
-#			(like `-O').
-#
-# PROFILE_CFLAGS	Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS	library suitable for performance testing (like 
-# 			`-pg').  This may or may not include debugging 
-# 			or production flags.
-#			
-# CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-#			The CFLAGS should contains *something* or else 
-#			configure will probably add `-g'.  For most
-#			systems this isn't a problem but some systems
-#			will disable optimizations in favor of the
-#			`-g'.
-#			
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-    gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
-	PROD_CFLAGS="-O3 -fomit-frame-pointer"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    cc)
-	CFLAGS="$CFLAGS"
-	DEBUG_CFLAGS="-g -h zero -h scalar0"
-	DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
-	PROD_CFLAGS="-O2 -h scalar0"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the UNICOS architechture)
-#
-R_LARGE=18
-R_INTEGER=18
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-dp"
-    DEBUG_FFLAGS="-dp"
-    PROD_FFLAGS="-dp"
-    PROFILE_FFLAGS="-dp"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/unicosmk b/fortran/config/unicosmk
deleted file mode 100644
index e2a4baf..0000000
--- a/fortran/config/unicosmk
+++ /dev/null
@@ -1,170 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS		Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS	library suitable for use with debugging
-#			tools. Usually this list will exclude
-#			optimization switches (like `-O') and include
-#			switches that turn on symbolic debugging
-#			support (like `-g').
-#
-# PROD_CFLAGS		Flags to pass to the compiler to create a
-# PROD_CPPFLAGS		production version of the library.  These
-#			usualy exclude symbolic debugging switches
-#			(like `-g') and include optimization switches
-#			(like `-O').
-#
-# PROFILE_CFLAGS	Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS	library suitable for performance testing (like 
-# 			`-pg').  This may or may not include debugging 
-# 			or production flags.
-#			
-# CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-#			The CFLAGS should contains *something* or else 
-#			configure will probably add `-g'.  For most
-#			systems this isn't a problem but some systems
-#			will disable optimizations in favor of the
-#			`-g'.
-#			
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-    gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3 -fomit-frame-pointer"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    cc)
-	CFLAGS="$CFLAGS"
-	DEBUG_CFLAGS="-g -h zero"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O2 -h scalar0"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the UNICOS architechture)
-#
-R_LARGE=18
-R_INTEGER=18
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-dp"
-    DEBUG_FFLAGS="-dp"
-    PROD_FFLAGS="-dp"
-    PROFILE_FFLAGS="-dp"
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/unicosmk2.0.5.X b/fortran/config/unicosmk2.0.5.X
deleted file mode 100644
index 68a19a8..0000000
--- a/fortran/config/unicosmk2.0.5.X
+++ /dev/null
@@ -1,172 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS		Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS	library suitable for use with debugging
-#			tools. Usually this list will exclude
-#			optimization switches (like `-O') and include
-#			switches that turn on symbolic debugging
-#			support (like `-g').
-#
-# PROD_CFLAGS		Flags to pass to the compiler to create a
-# PROD_CPPFLAGS		production version of the library.  These
-#			usualy exclude symbolic debugging switches
-#			(like `-g') and include optimization switches
-#			(like `-O').
-#
-# PROFILE_CFLAGS	Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS	library suitable for performance testing (like 
-# 			`-pg').  This may or may not include debugging 
-# 			or production flags.
-#			
-# CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-#			The CFLAGS should contains *something* or else 
-#			configure will probably add `-g'.  For most
-#			systems this isn't a problem but some systems
-#			will disable optimizations in favor of the
-#			`-g'.
-#			
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-    gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3 -fomit-frame-pointer"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    cc)
-	CFLAGS="$CFLAGS"
-	DEBUG_CFLAGS="-g -h zero"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O2 -h scalar0"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the UNICOS architechture)
-#
-R_LARGE=18
-R_INTEGER=18
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    # -Wl passes flags to the linker and -M# will ignore warnings with
-    # number #. Warning 405 was stopping the executable from being built.
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-dp -Wl-M405"
-    DEBUG_FFLAGS=""
-    PROD_FFLAGS=""
-    PROFILE_FFLAGS=""
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/unicosmk2.0.6.X b/fortran/config/unicosmk2.0.6.X
deleted file mode 100644
index e4e02fc..0000000
--- a/fortran/config/unicosmk2.0.6.X
+++ /dev/null
@@ -1,172 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS		Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS	library suitable for use with debugging
-#			tools. Usually this list will exclude
-#			optimization switches (like `-O') and include
-#			switches that turn on symbolic debugging
-#			support (like `-g').
-#
-# PROD_CFLAGS		Flags to pass to the compiler to create a
-# PROD_CPPFLAGS		production version of the library.  These
-#			usualy exclude symbolic debugging switches
-#			(like `-g') and include optimization switches
-#			(like `-O').
-#
-# PROFILE_CFLAGS	Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS	library suitable for performance testing (like 
-# 			`-pg').  This may or may not include debugging 
-# 			or production flags.
-#			
-# CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-#			The CFLAGS should contains *something* or else 
-#			configure will probably add `-g'.  For most
-#			systems this isn't a problem but some systems
-#			will disable optimizations in favor of the
-#			`-g'.
-#			
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-    gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3 -fomit-frame-pointer"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    cc)
-	CFLAGS="$CFLAGS"
-	DEBUG_CFLAGS="-g -h zero"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O2 -h scalar0"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the UNICOS architechture)
-#
-R_LARGE=18
-R_INTEGER=18
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    # -Wl passes flags to the linker and -M# will ignore warnings with
-    # number #. Warning 405 and 412 were stopping the executable from being built.
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-dp -Wl-M405,412"
-    DEBUG_FFLAGS=""
-    PROD_FFLAGS=""
-    PROFILE_FFLAGS=""
-    f9x_flags_set=yes
-fi
diff --git a/fortran/config/unicosmk2.0.X b/fortran/config/unicosmk2.0.X
deleted file mode 100644
index 68a19a8..0000000
--- a/fortran/config/unicosmk2.0.X
+++ /dev/null
@@ -1,172 +0,0 @@
-#							-*- shell-script -*-
-#
-# This file is part of the HDF5 build script.  It is processed shortly
-# after configure starts and defines, among other things, flags for
-# the various compile modes.
-
-
-#----------------------------------------------------------------------------
-# Compiler flags. The CPPFLAGS values should not include package debug
-# flags like `-DH5G_DEBUG' since these are added with the
-# `--enable-debug' switch of configure.
-#----------------------------------------------------------------------------
-
-
-# Choosing a C Compiler
-# ---------------------
-#
-# The user should be able to specify the compiler by setting the CC
-# environment variable to the name of the compiler and any switches it 
-# requires for proper operation.  If CC is unset then this script may
-# set it.  If CC is unset by time this script completes then configure 
-# will try `gcc' and `cc' in that order (perhaps some others too).
-#
-# Note: Code later in this file may depend on the value of $CC_BASENAME
-#       in order to distinguish between different compilers when
-#       deciding which compiler command-line switches to use.  This
-#       variable is set based on the incoming value of $CC and is only
-#       used within this file.
-
-if test "X-" =  "X-$CC"; then
-    CC=cc
-    CC_BASENAME=cc
-fi
-# no need to use RANLIB
-RANLIB=:
-
-
-# C Compiler and Preprocessor Flags
-# ---------------------------------
-#
-# Flags that end with `_CFLAGS' are always passed to the compiler.
-# Flags that end with `_CPPFLAGS' are passed to the compiler when
-# compiling but not when linking.
-#
-# DEBUG_CFLAGS		Flags to pass to the compiler to create a
-# DEBUG_CPPFLAGS	library suitable for use with debugging
-#			tools. Usually this list will exclude
-#			optimization switches (like `-O') and include
-#			switches that turn on symbolic debugging
-#			support (like `-g').
-#
-# PROD_CFLAGS		Flags to pass to the compiler to create a
-# PROD_CPPFLAGS		production version of the library.  These
-#			usualy exclude symbolic debugging switches
-#			(like `-g') and include optimization switches
-#			(like `-O').
-#
-# PROFILE_CFLAGS	Flags to pass to the compiler to create a
-# PROFILE_CPPFLAGS	library suitable for performance testing (like 
-# 			`-pg').  This may or may not include debugging 
-# 			or production flags.
-#			
-# CFLAGS		Flags can be added to this variable which
-#			might already be partially initialized.  These 
-#			flags will always be passed to the compiler
-#			and should include switches to turn on full
-#			warnings.  HDF5 attempts to be ANSI and Posix
-#			compliant and employ good programming
-#			practices resulting in few if any
-#			warnings.
-#
-#			Warning flags do not have to be added to CFLAGS
-#			variable if the compiler is the GNU gcc
-#			compiler or a descendent of gcc such as EGCS or PGCC.
-#
-#			The CFLAGS should contains *something* or else 
-#			configure will probably add `-g'.  For most
-#			systems this isn't a problem but some systems
-#			will disable optimizations in favor of the
-#			`-g'.
-#			
-#
-# These flags should be set according to the compiler being used.
-# There are two ways to check the compiler.  You can try using `-v' or 
-# `--version' to see if the compiler will print a version string.  You 
-# can use the value of $CC_BASENAME which is the base name of the
-# first word in $CC (note that the value of CC may have changed
-# above).
-
-case $CC_BASENAME in
-    gcc)
-	CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions
-	DEBUG_CFLAGS="-g -fverbose-asm"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O3 -fomit-frame-pointer"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    cc)
-	CFLAGS="$CFLAGS"
-	DEBUG_CFLAGS="-g -h zero"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O2 -h scalar0"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-
-    *)
-	CFLAGS="$CFLAGS -ansi"
-	DEBUG_CFLAGS="-g"
-	DEBUG_CPPFLAGS=
-	PROD_CFLAGS="-O"
-	PROD_CPPFLAGS=
-	PROFILE_CFLAGS="-pg"
-	PROFILE_CPPFLAGS=
-	;;
-esac
-
-
-
-# Overriding Configure Tests
-# --------------------------
-#
-# Values for overriding configuration tests when cross compiling.
-# This includes compiling on some machines where the serial front end
-# compiles for a parallel back end.
-
-# Set this to `yes' or `no' depending on whether the target is big
-# endian or little endian.
-#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}
-
-# Set this to the width required by printf() to print type `long
-# long'.  For instance, if the format would be `%lld' then set it to
-# `ll' or if the format would be `%qd' set it to `q'.
-#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'}
-
-# The default Fortran 90 compiler
-
-#
-# HDF5 integers
-#
-# 	R_LARGE is the number of digits for the bigest integer supported.
-#	R_INTEGER is the number of digits in INTEGER
-#
-# (for the UNICOS architechture)
-#
-R_LARGE=18
-R_INTEGER=18
-HSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HSSIZE_T='SELECTED_INT_KIND(R_LARGE)'
-HID_T='SELECTED_INT_KIND(R_INTEGER)'
-SIZE_T='SELECTED_INT_KIND(R_LARGE)'
-OBJECT_NAMELEN_DEFAULT_F=-1
-
-if test "X-" = "X-$F9X"; then
-    F9X=f90
-fi
-
-if test "X-" = "X-$f9x_flags_set"; then
-    # -Wl passes flags to the linker and -M# will ignore warnings with
-    # number #. Warning 405 was stopping the executable from being built.
-    F9XSUFFIXFLAG=""
-    FSEARCH_DIRS=""
-    FFLAGS="-dp -Wl-M405"
-    DEBUG_FFLAGS=""
-    PROD_FFLAGS=""
-    PROFILE_FFLAGS=""
-    f9x_flags_set=yes
-fi
diff --git a/fortran/configure b/fortran/configure
deleted file mode 100755
index a01c267..0000000
--- a/fortran/configure
+++ /dev/null
@@ -1,11108 +0,0 @@
-#! /bin/sh
-# From configure.in Id: configure.in.
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.53 for HDF5 Fortran 1.7.1.
-#
-# Report bugs to <hdfhelp@ncsa.uiuc.edu>.
-#
-# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) lt_cv_sys_path_separator=';' ;;
-    *)     lt_cv_sys_path_separator=':' ;;
-  esac
-  PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-
-# NLS nuisances.
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
-    { $as_unset LANG || test "${LANG+set}" != set; } ||
-      { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
-    { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
-      { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
-    { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
-      { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
-    { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
-      { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
-    { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
-      { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
-    { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
-      { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
-    { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
-      { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
-    { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
-      { LC_MESSAGES=C; export LC_MESSAGES; }
-
-
-# Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conftest.sh
-  echo  "exit 0"   >>conftest.sh
-  chmod +x conftest.sh
-  if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conftest.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME='HDF5 Fortran'
-PACKAGE_TARNAME='hdf5-fortran'
-PACKAGE_VERSION='1.7.1'
-PACKAGE_STRING='HDF5 Fortran 1.7.1'
-PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu'
-
-ac_unique_file="src/HDF5.f90"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_option in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-              localstatedir libdir includedir oldincludedir infodir mandir
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$0" : 'X\(//\)[^/]' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures HDF5 Fortran 1.7.1 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
-  cat <<_ACEOF
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
-_ACEOF
-
-  cat <<\_ACEOF
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-  case $ac_init_help in
-     short | recursive ) echo "Configuration of HDF5 Fortran 1.7.1:";;
-   esac
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-shared=PKGS  build shared libraries default=yes
-  --enable-static=PKGS  build static libraries default=yes
-  --enable-fast-install=PKGS  optimize for fast installation default=yes
-  --disable-libtool-lock  avoid locking (might break parallel builds)
-  --enable-production     Determines how to run the compiler.
-  --enable-static-exec    Build only statically linked executables
-                          [default=no]
-  --enable-linux-lfs      Enable support for large (64-bit) files on Linux.
-                          [default=check]
-  --enable-stream-vfd     Build the Stream Virtual File Driver [default=no]
-  --enable-filters=all    Turn on all internal I/O filters. One may also
-                          specify a comma-separated list of filters or the
-                          word no. The default is all internal I/O filters.
-  --enable-parallel       Search for MPI-IO and MPI support files
-  --enable-gpfs           Enable GPFS hints for the MPI/POSIX file driver.
-                          [default=no]
-
-Optional Packages:
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-gnu-ld           assume the C compiler uses GNU ld default=no
-  --with-pic              try to use only PIC/non-PIC objects default=use both
-  --with-zlib=DIR         Use zlib library for external deflate I/O filter
-                          [default=yes]
-  --with-szlib=DIR        Use szlib library for external szlib I/O filter
-                          [default=yes]
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <hdfhelp@ncsa.uiuc.edu>.
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
-    ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-           test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
-    else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
-  done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
-  cat <<\_ACEOF
-HDF5 Fortran configure 1.7.1
-generated by GNU Autoconf 2.53
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by HDF5 Fortran $as_me 1.7.1, which was
-generated by GNU Autoconf 2.53.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell meta-characters.
-ac_configure_args=
-ac_sep=
-for ac_arg
-do
-  case $ac_arg in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n ) continue ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    continue ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-    ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-  esac
-  case " $ac_configure_args " in
-    *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-    *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-       ac_sep=" " ;;
-  esac
-  # Get rid of the leading space.
-done
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-    cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-{
-  (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      sed -n \
-        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
-    *)
-      sed -n \
-        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-}
-    echo
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
-      echo
-      sed "/^$/d" confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core core.* *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-     ' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
-    esac
-  fi
-else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-        { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-        { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-        { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-        ac_cache_corrupted=:
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_config_headers="$ac_config_headers src/H5config_fortran.h"
-
-
-ac_aux_dir=
-for ac_dir in ../bin $srcdir/../bin; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f $ac_dir/shtool; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../bin $srcdir/../bin" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in ../bin $srcdir/../bin" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-ac_config_commands="$ac_config_commands default-1"
-
-
-# Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-   { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
-build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
-host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-echo "$as_me:$LINENO: checking shell variables initial values" >&5
-echo $ECHO_N "checking shell variables initial values... $ECHO_C" >&6
-set >&5
-echo "$as_me:$LINENO: result: done" >&5
-echo "${ECHO_T}done" >&6
-
-if test -x "/bin/pwd"; then
-   pwd=/bin/pwd
-else
-   pwd=pwd
-fi
- ROOT=`$pwd`
-
-echo "$as_me:$LINENO: checking for cached host" >&5
-echo $ECHO_N "checking for cached host... $ECHO_C" >&6
-if test "${hdf5_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  hdf5_cv_host="none"
-fi
-echo "$as_me:$LINENO: result: $hdf5_cv_host" >&5
-echo "${ECHO_T}$hdf5_cv_host" >&6;
-if test "X$hdf5_cv_host" = "Xnone"; then
-   hdf5_cv_host=$host
-elif test "$hdf5_cv_host" != "$host"; then
-   echo "The config.cache file was generated on $hdf5_cv_host but"
-   echo "this is $host. Please remove that file and try again."
-   { { echo "$as_me:$LINENO: error: config.cache file is invalid" >&5
-echo "$as_me: error: config.cache file is invalid" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-case "$host_os" in
-   aix4.*)
-      host_os_novers=aix4.x
-      ;;
-   aix5.*)
-      host_os_novers=aix5.x
-      ;;
-   freebsd*)
-      host_os_novers=freebsd
-      ;;
-   irix5.*)
-      host_os_novers=irix5.x
-      ;;
-   irix6.*)
-      host_os_novers=irix6.x
-      ;;
-   osf4.*)
-      host_os_novers=osf4.x
-      ;;
-   osf5.*)
-      host_os_novers=osf5.x
-      ;;
-   solaris2.*)
-      host_os_novers=solaris2.x
-      ;;
-   *)
-      host_os_novers=$host_os
-      ;;
-esac
-
-host_config="none"
-for f in $host_cpu-$host_vendor-$host_os \
-   $host_cpu-$host_vendor-$host_os_novers \
-   $host_vendor-$host_os \
-   $host_vendor-$host_os_novers \
-   $host_cpu-$host_os \
-   $host_cpu-$host_os_novers \
-   $host_cpu-$host_vendor \
-   $host_os \
-   $host_os_novers \
-   $host_vendor \
-   $host_cpu ; do
-   echo "$as_me:$LINENO: checking for config $f" >&5
-echo $ECHO_N "checking for config $f... $ECHO_C" >&6
-   if test -f $srcdir/config/$f; then
-      host_config=$srcdir/config/$f
-      echo "$as_me:$LINENO: result: found" >&5
-echo "${ECHO_T}found" >&6
-      break
-   fi
-   echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-done
-if test "X$host_config" != "Xnone"; then
-   CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`"
-   . $host_config
-fi
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$as_dir/$ac_word" ${1+"$@"}
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$ac_ct_CC" && break
-done
-
-  CC=$ac_ct_CC
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output" >&5
-echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null;
-                ls a.out conftest 2>/dev/null;
-                ls a.* conftest.* 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;;
-    a.out ) # We found the default executable, but exeext='' is most
-            # certainly right.
-            break;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-          # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
-          export ac_cv_exeext
-          break;;
-    * ) break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5
-echo "$as_me: error: C compiler cannot create executables" >&2;}
-   { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
-  if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-	cross_compiling=yes
-    else
-	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-  fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-          export ac_cv_exeext
-          break;;
-    * ) break;;
-  esac
-done
-else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_compiler_gnu=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   ''\
-   '#include <stdlib.h>' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-$ac_declaration
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-continue
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_declaration
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <assert.h>
-                     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <assert.h>
-                     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-	CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`"
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.make <<\_ACEOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftest.make
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-  SET_MAKE=
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-        if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-          if test $ac_prog = install &&
-            grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-            # AIX install.  It has an incompatible calling convention.
-            :
-          elif test $ac_prog = install &&
-            grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-            # program-specific install script used by HP pwplus--don't use.
-            :
-          else
-            ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-            break 3
-          fi
-        fi
-      done
-    done
-    ;;
-esac
-done
-
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL=$ac_install_sh
-  fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=yes
-fi;
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi;
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi;
-# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) lt_cv_sys_path_separator=';' ;;
-    *)     lt_cv_sys_path_separator=':' ;;
-  esac
-  PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi;
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo "$as_me:$LINENO: checking for ld used by GCC" >&5
-echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
-else
-  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
-fi
-if test "${lt_cv_path_LD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
-if test "${lt_cv_ld_reload_flag+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
-if test "${lt_cv_path_NM+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$as_me:$LINENO: result: $NM" >&5
-echo "${ECHO_T}$NM" >&6
-
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6
-fi
-
-echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5
-echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
-if test "${lt_cv_deplibs_check_method+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* | pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libc.sl
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
-  else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  esac
-  ;;
-esac
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-
-
-
-
-
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo "$as_me:$LINENO: checking command to parse $NM output" >&5
-echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-irix*)
-  symcode='[BCDEGRST]'
-  ;;
-solaris* | sysv5*)
-  symcode='[BDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Write the raw and C identifiers.
-lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
-
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  save_LIBS="$LIBS"
-	  save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$save_LIBS"
-	  CFLAGS="$save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  global_symbol_to_cdecl=
-  global_symbol_to_c_name_address=
-else
-  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
-  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
-fi
-if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
-then
-  echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6
-else
-  echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6
-fi
-
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_cv_header_stdc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "memchr" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "free" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
-  :
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
-                     || ('j' <= (c) && (c) <= 'r') \
-                     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-        || toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-                  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_Header=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_Header=no"
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-for ac_header in dlfcn.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  RANLIB=$ac_ct_RANLIB
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  STRIP=$ac_ct_STRIP
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-
-enable_dlopen=no
-enable_win32_dll=no
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-
-fi;
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 3898 "configure"' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
-if test "${lt_cv_cc_needs_belf+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-     cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  lt_cv_cc_needs_belf=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-lt_cv_cc_needs_belf=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-need_locks="$enable_libtool_lock"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-if test x"$host" != x"$build"; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case $host_os in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-    ;;
-  *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-echo "$as_me:$LINENO: result: $objdir" >&5
-echo "${ECHO_T}$objdir" >&6
-
-
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi;
-test -z "$pic_mode" && pic_mode=default
-
-# We assume here that the value for lt_cv_prog_cc_pic will not be cached
-# in isolation, and that seeing it set (from the cache) indicates that
-# the associated values are set (in the cache) correctly too.
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-if test "${lt_cv_prog_cc_pic+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-   lt_cv_prog_cc_pic=
-  lt_cv_prog_cc_shlib=
-  lt_cv_prog_cc_wl=
-  lt_cv_prog_cc_static=
-  lt_cv_prog_cc_no_builtin=
-  lt_cv_prog_cc_can_build_shared=$can_build_shared
-
-  if test "$GCC" = yes; then
-    lt_cv_prog_cc_wl='-Wl,'
-    lt_cv_prog_cc_static='-static'
-
-    case $host_os in
-    aix*)
-      # Below there is a dirty hack to force normal static linking with -ldl
-      # The problem is because libdl dynamically linked with both libc and
-      # libC (AIX C++ library), which obviously doesn't included in libraries
-      # list by gcc. This cause undefined symbols with -static flags.
-      # This hack allows C programs to be linked with "-static -ldl", but
-      # not sure about C++ programs.
-      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_cv_prog_cc_pic='-fno-common'
-      ;;
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	 lt_cv_prog_cc_pic=-Kconform_pic
-      fi
-      ;;
-    *)
-      lt_cv_prog_cc_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for PIC flags for the system compiler.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      lt_cv_prog_cc_wl='-Wl,'
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_cv_prog_cc_static='-Bstatic'
-      else
-        ####################################################################
-        ## HACK Alert! This is causing problems with C++ on SP3...We'll just
-        ## remove this...THERE! All better now.
-        ####################################################################
-        ##lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
-		:
-      fi
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
-      lt_cv_prog_cc_pic='+Z'
-      ;;
-
-    irix5* | irix6*)
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
-      # PIC (with -KPIC) is the default.
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-
-    newsos6)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      # All OSF/1 code is PIC.
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      lt_cv_prog_cc_pic='-Kpic'
-      lt_cv_prog_cc_static='-dn'
-      lt_cv_prog_cc_shlib='-belf'
-      ;;
-
-    solaris*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Wl,'
-      ;;
-
-    sunos4*)
-      lt_cv_prog_cc_pic='-PIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Qoption ld '
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      if test "x$host_vendor" = xsni; then
-	lt_cv_prog_cc_wl='-LD'
-      else
-	lt_cv_prog_cc_wl='-Wl,'
-      fi
-      ;;
-
-    uts4*)
-      lt_cv_prog_cc_pic='-pic'
-      lt_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_cv_prog_cc_pic='-Kconform_pic'
-	lt_cv_prog_cc_static='-Bstatic'
-      fi
-      ;;
-
-    *)
-      lt_cv_prog_cc_can_build_shared=no
-      ;;
-    esac
-  fi
-
-fi
-
-if test -z "$lt_cv_prog_cc_pic"; then
-  echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6
-else
-  echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5
-echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6
-
-  # Check to make sure the pic_flag actually works.
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6
-  if test "${lt_cv_prog_cc_pic_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      save_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-        case $host_os in
-      hpux9* | hpux10* | hpux11*)
-	# On HP-UX, both CC and GCC only warn that PIC is supported... then
-	# they create non-PIC objects.  So, if there were any warnings, we
-	# assume that PIC is not supported.
-	if test -s conftest.err; then
-	  lt_cv_prog_cc_pic_works=no
-	else
-	  lt_cv_prog_cc_pic_works=yes
-	fi
-	;;
-      *)
-	lt_cv_prog_cc_pic_works=yes
-	;;
-      esac
-
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-      lt_cv_prog_cc_pic_works=no
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-    CFLAGS="$save_CFLAGS"
-
-fi
-
-
-  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
-    lt_cv_prog_cc_pic=
-    lt_cv_prog_cc_can_build_shared=no
-  else
-    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
-  fi
-
-  echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5
-echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6
-fi
-
-# Check for any special shared library compilation flags.
-if test -n "$lt_cv_prog_cc_shlib"; then
-  { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5
-echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;}
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$lt_cv_prog_cc_shlib[ 	]" >/dev/null; then :
-  else
-   { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
-echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
-    lt_cv_prog_cc_can_build_shared=no
-  fi
-fi
-
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6
-if test "${lt_cv_prog_cc_static_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-    lt_cv_prog_cc_static_works=no
-  save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  lt_cv_prog_cc_static_works=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-  LDFLAGS="$save_LDFLAGS"
-
-fi
-
-
-# Belt *and* braces to stop my trousers falling down:
-test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
-echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5
-echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6
-
-pic_flag="$lt_cv_prog_cc_pic"
-special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
-wl="$lt_cv_prog_cc_wl"
-link_static_flag="$lt_cv_prog_cc_static"
-no_builtin_flag="$lt_cv_prog_cc_no_builtin"
-can_build_shared="$lt_cv_prog_cc_can_build_shared"
-
-
-# Check to see if options -o and -c are simultaneously supported by compiler
-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-if test "${lt_cv_compiler_c_o+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-$rm -r conftest 2>/dev/null
-mkdir conftest
-cd conftest
-echo "int some_variable = 0;" > conftest.$ac_ext
-mkdir out
-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-# that will create temporary files in the current directory regardless of
-# the output directory.  Thus, making CWD read-only will cause this test
-# to fail, enabling locking or at least warning the user not to do parallel
-# builds.
-chmod -w .
-save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
-compiler_c_o=no
-if { (eval echo configure:4439: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
-  # The compiler can only warn and ignore the option if not recognized
-  # So say no if there are warnings
-  if test -s out/conftest.err; then
-    lt_cv_compiler_c_o=no
-  else
-    lt_cv_compiler_c_o=yes
-  fi
-else
-  # Append any errors to the config.log.
-  cat out/conftest.err 1>&5
-  lt_cv_compiler_c_o=no
-fi
-CFLAGS="$save_CFLAGS"
-chmod u+w .
-$rm conftest* out/*
-rmdir out
-cd ..
-rmdir conftest
-$rm -r conftest 2>/dev/null
-
-fi
-
-compiler_c_o=$lt_cv_compiler_c_o
-echo "$as_me:$LINENO: result: $compiler_c_o" >&5
-echo "${ECHO_T}$compiler_c_o" >&6
-
-if test x"$compiler_c_o" = x"yes"; then
-  # Check to see if we can write to a .lo
-  echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6
-  if test "${lt_cv_compiler_o_lo+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-  lt_cv_compiler_o_lo=no
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -c -o conftest.lo"
-  save_objext="$ac_objext"
-  ac_objext=lo
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-int some_variable = 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-      # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      lt_cv_compiler_o_lo=no
-    else
-      lt_cv_compiler_o_lo=yes
-    fi
-
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  ac_objext="$save_objext"
-  CFLAGS="$save_CFLAGS"
-
-fi
-
-  compiler_o_lo=$lt_cv_compiler_o_lo
-  echo "$as_me:$LINENO: result: $compiler_o_lo" >&5
-echo "${ECHO_T}$compiler_o_lo" >&6
-else
-  compiler_o_lo=no
-fi
-
-# Check to see if we can do hard links to lock some files if needed
-hard_links="nottested"
-if test "$compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-if test "$GCC" = yes; then
-  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
-  echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
-  compiler_rtti_exceptions=no
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-int some_variable = 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-      # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      compiler_rtti_exceptions=no
-    else
-      compiler_rtti_exceptions=yes
-    fi
-
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  CFLAGS="$save_CFLAGS"
-  echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$compiler_rtti_exceptions" >&6
-
-  if test "$compiler_rtti_exceptions" = "yes"; then
-    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
-  else
-    no_builtin_flag=' -fno-builtin'
-  fi
-fi
-
-# See if the linker supports building shared libraries.
-echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6
-
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-old_archive_from_expsyms_cmds=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_into_libs=no
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-link_all_deplibs=unknown
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced.  Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-extract_expsyms_cmds=
-
-case $host_os in
-cygwin* | mingw* | pw32*)
-  # FIXME: the MSVC++ port hasn't been tested in a loooong time
-  # When not using gcc, we currently assume that we are using
-  # Microsoft Visual C++.
-  if test "$GCC" != yes; then
-    with_gnu_ld=no
-  fi
-  ;;
-openbsd*)
-  with_gnu_ld=no
-  ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # If archive_cmds runs LD, not CC, wlarc should be empty
-  wlarc='${wl}'
-
-  # See if GNU ld supports shared libraries.
-  case $host_os in
-  aix3* | aix4* | aix5*)
-    # On AIX, the GNU linker is very broken
-    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
-    ld_shlibs=no
-    cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-
-    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-    # that the semantics of dynamic libraries on AmigaOS, at least up
-    # to version 4, is to share data among multiple programs linked
-    # with the same dynamic library.  Since this doesn't match the
-    # behavior of shared libraries on other platforms, we can use
-    # them.
-    ld_shlibs=no
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec='-L$libdir'
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-
-    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-      else $CC -o impgen impgen.c ; fi)~
-      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-    # cygwin and mingw dlls have different entry points and sets of symbols
-    # to exclude.
-    # FIXME: what about values for MSVC?
-    dll_entry=__cygwin_dll_entry@12
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-    case $host_os in
-    mingw*)
-      # mingw values
-      dll_entry=_DllMainCRTStartup@12
-      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-      ;;
-    esac
-
-    # mingw and cygwin differ, and it's simplest to just exclude the union
-    # of the two symbol sets.
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-    # recent cygwin and mingw systems supply a stub DllMain which the user
-    # can override, but on older systems we have to supply one (in ltdll.c)
-    if test "x$lt_cv_need_dllmain" = "xyes"; then
-      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-    else
-      ltdll_obj=
-      ltdll_cmds=
-    fi
-
-    # Extract the symbol export list from an `--export-all' def file,
-    # then regenerate the def file from the symbol export list, so that
-    # the compiled dll only exports the symbol export list.
-    # Be careful not to strip the DATA tag left be newer dlltools.
-    export_symbols_cmds="$ltdll_cmds"'
-      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-    # If the export-symbols file already is a .def file (1st line
-    # is EXPORTS), use it as is.
-    # If DATA tags from a recent dlltool are present, honour them!
-    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname-def;
-      else
-	echo EXPORTS > $output_objdir/$soname-def;
-	_lt_hint=1;
-	cat $export_symbols | while read symbol; do
-	 set dummy \$symbol;
-	 case \$# in
-	   2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	   *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
-	 esac;
-	 _lt_hint=`expr 1 + \$_lt_hint`;
-	done;
-      fi~
-      '"$ltdll_cmds"'
-      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-      wlarc=
-    else
-      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    fi
-    ;;
-
-  solaris* | sysv5*)
-    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-      ld_shlibs=no
-      cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    wlarc=
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-  esac
-
-  if test "$ld_shlibs" = yes; then
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    case $host_os in
-    cygwin* | mingw* | pw32*)
-      # dlltool doesn't understand --whole-archive et. al.
-      whole_archive_flag_spec=
-      ;;
-    *)
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-	whole_archive_flag_spec=
-      fi
-      ;;
-    esac
-  fi
-else
-  # PORTME fill in a description of your system's linker (not GNU ld)
-  case $host_os in
-  aix3*)
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-    # Note: this linker hardcodes the directories in LIBPATH if there
-    # are no directories specified by -L.
-    hardcode_minus_L=yes
-    if test "$GCC" = yes && test -z "$link_static_flag"; then
-      # Neither direct hardcoding nor static linking is supported with a
-      # broken collect2.
-      hardcode_direct=unsupported
-    fi
-    ;;
-
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-	    aix_use_runtimelinking=yes
-	    break
-	  fi
-	done
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    hardcode_direct=yes
-    archive_cmds=''
-    hardcode_libdir_separator=':'
-    if test "$GCC" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	  strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  hardcode_direct=yes
-	else
-	  # We have old collect2
-	  hardcode_direct=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L=yes
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_libdir_separator=
-	fi
-      esac
-
-      shared_flag='-shared'
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	shared_flag='${wl}-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall can do strange things, so it is better to
-    # generate a list of symbols to export.
-    always_export_symbols=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag='-berok'
-      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-    else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag="-z nodefs"
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-      else
-        #######################################################################
-        # This is a MAJOR HACK(tm) to get HDF5 to compile on Pacific Blue.
-        # The ``-b nolibpath -b ...'' flags were messing with the mpicc
-        # compiler's already defined library paths and it wasn't able to find
-        # the libraries it needed to run....DOH!
-        hname="`hostname`"
-
-        case "$hname" in
-          *pacific.llnl.gov* | *s0*)
-            hardcode_libdir_flag_spec=' '
-            ;;
-          *)
-            hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-            ;;
-        esac
-        #
-        # End MAJOR HACK
-        #
-        #######################################################################
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='${wl}-berok'
-	# This is a bit strange, but is similar to how AIX traditionally builds
-	# it's shared libraries.
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
-      fi
-    fi
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    # see comment about different semantics on the GNU ld section
-    ld_shlibs=no
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec=' '
-    allow_undefined_flag=unsupported
-    # Tell ltmain to make .lib files, not .a files.
-    libext=lib
-    # FIXME: Setting linknames here is a bad hack.
-    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-    # The linker will automatically build a .lib file if we build a DLL.
-    old_archive_from_new_cmds='true'
-    # FIXME: Should let the user specify the lib program.
-    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
-    fix_srcfile_path='`cygpath -w "$srcfile"`'
-    ;;
-
-  darwin* | rhapsody*)
-    case "$host_os" in
-    rhapsody* | darwin1.[012])
-      allow_undefined_flag='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      allow_undefined_flag='-flat_namespace -undefined suppress'
-      ;;
-    esac
-    # FIXME: Relying on posixy $() will cause problems for
-    #        cross-compilation, but unfortunately the echo tests do not
-    #        yet detect zsh echo's removal of \ escapes.
-    archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
-    # We need to add '_' to the symbols in $export_symbols first
-    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    whole_archive_flag_spec='-all_load $convenience'
-    ;;
-
-  freebsd1*)
-    ld_shlibs=no
-    ;;
-
-  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-  # support.  Future versions do this automatically, but an explicit c++rt0.o
-  # does not break anything, and helps significantly (at the cost of a little
-  # extra space).
-  freebsd2.2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-  freebsd2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-  freebsd*)
-    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  hpux9* | hpux10* | hpux11*)
-    case $host_os in
-    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
-    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
-    esac
-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_direct=yes
-    hardcode_minus_L=yes # Not in the search PATH, but as the default
-			 # location of the library.
-    export_dynamic_flag_spec='${wl}-E'
-    ;;
-
-  irix5* | irix6*)
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-    else
-      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    link_all_deplibs=yes
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-    else
-      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-    fi
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  newsos6)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_shlibpath_var=no
-    ;;
-
-  openbsd*)
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
-    else
-      case "$host_os" in
-      openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_libdir_flag_spec='-R$libdir'
-        ;;
-      *)
-        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-        ;;
-      esac
-    fi
-    ;;
-
-  os2*)
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    allow_undefined_flag=unsupported
-    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-    ;;
-
-  osf3*)
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    ;;
-
-  osf4* | osf5*)	# as osf3* with the addition of -msym flag
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-      #Both c and cxx compiler support -rpath directly
-      hardcode_libdir_flag_spec='-rpath $libdir'
-    fi
-    hardcode_libdir_separator=:
-    ;;
-
-  sco3.2v5*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    runpath_var=LD_RUN_PATH
-    hardcode_runpath_var=yes
-    export_dynamic_flag_spec='${wl}-Bexport'
-    ;;
-
-  solaris*)
-    # gcc --version < 3.0 without binutils cannot create self contained
-    # shared libraries reliably, requiring libgcc.a to resolve some of
-    # the object symbols generated in some cases.  Libraries that use
-    # assert need libgcc.a to resolve __eprintf, for example.  Linking
-    # a copy of libgcc.a into every shared library to guarantee resolving
-    # such symbols causes other problems:  According to Tim Van Holder
-    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
-    # (to the application) exception stack for one thing.
-    no_undefined_flag=' -z defs'
-    if test "$GCC" = yes; then
-      case `$CC --version 2>/dev/null` in
-      [12].*)
-	cat <<EOF 1>&2
-
-*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
-*** create self contained shared libraries on Solaris systems, without
-*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
-*** -no-undefined support, which will at least allow you to build shared
-*** libraries.  However, you may find that when you link such libraries
-*** into an application without using GCC, you have to manually add
-*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
-*** upgrade to a newer version of GCC.  Another option is to rebuild your
-*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
-
-EOF
-        no_undefined_flag=
-	;;
-      esac
-    fi
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_shlibpath_var=no
-    case $host_os in
-    solaris2.[0-5] | solaris2.[0-5].*) ;;
-    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
-    esac
-    link_all_deplibs=yes
-    ;;
-
-  sunos4*)
-    if test "x$host_vendor" = xsequent; then
-      # Use $CC to link under sequent, because it throws in some extra .o
-      # files that make .init and .fini sections work.
-      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-    fi
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4)
-    if test "x$host_vendor" = xsno; then
-      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes # is this really true???
-    else
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-    fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4.3*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    export_dynamic_flag_spec='-Bexport'
-    ;;
-
-  sysv5*)
-    no_undefined_flag=' -z text'
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec=
-    hardcode_shlibpath_var=no
-    runpath_var='LD_RUN_PATH'
-    ;;
-
-  uts4*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  dgux*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4*MP*)
-    if test -d /usr/nec; then
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ld_shlibs=yes
-    fi
-    ;;
-
-  sysv4.2uw2*)
-    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=no
-    hardcode_shlibpath_var=no
-    hardcode_runpath_var=yes
-    runpath_var=LD_RUN_PATH
-    ;;
-
-  sysv5uw7* | unixware7*)
-    no_undefined_flag='${wl}-z ${wl}text'
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    ld_shlibs=no
-    ;;
-  esac
-fi
-echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6
-test "$ld_shlibs" = no && can_build_shared=no
-
-# Check hardcoding attributes.
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var"; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$hardcode_shlibpath_var" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6
-
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-# PORTME Fill in your ld.so characteristics
-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	     echo ' yes '
-	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	  :
-	else
-	  can_build_shared=no
-	fi
-	;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can
-    # not hardcode correct soname into executable. Probably we can
-    # add versioning support to collect2, so additional links can
-    # be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  export_dynamic_flag_spec=-rdynamic
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  case $GCC,$host_os in
-  yes,cygwin*)
-    library_names_spec='$libname.dll.a'
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
-    ;;
-  *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  *)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  dynamic_linker="$host_os dld.sl"
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  shlibpath_var=SHLIB_PATH
-  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-  soname_spec='${libname}${release}.sl$major'
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6*)
-  version_type=irix
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
-  case $host_os in
-  irix5*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case "$host_os" in
-    openbsd2.[89] | openbsd2.[89].*)
-      shlibpath_overrides_runpath=no
-      ;;
-    *)
-      shlibpath_overrides_runpath=yes
-      ;;
-    esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
-test "$dynamic_linker" = no && can_build_shared=no
-
-# Report the final consequences.
-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6
-
-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6
-
-echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6
-
-if test "$hardcode_action" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-f = shl_load;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_shl_load=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-if test $ac_cv_func_shl_load = yes; then
-  lt_cv_dlopen="shl_load"
-else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_dld_shl_load=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-f = dlopen;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-if test $ac_cv_func_dlopen = yes; then
-  lt_cv_dlopen="dlopen"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_svld_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-if test $ac_cv_lib_svld_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dld_link ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_dld_dld_link=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-        test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 6250 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 6348 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
-
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $archive_cmds in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-    if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  $rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$lt_cv_prog_cc_wl
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      save_allow_undefined_flag=$allow_undefined_flag
-      allow_undefined_flag=
-      if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-      then
-	lt_cv_archive_cmds_need_lc=no
-      else
-	lt_cv_archive_cmds_need_lc=yes
-      fi
-      allow_undefined_flag=$save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi
-fi
-
-    echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5
-echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6
-    ;;
-  esac
-fi
-need_lc=${lt_cv_archive_cmds_need_lc-yes}
-
-# The second clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  :
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-
-if test -f "$ltmain"; then
-  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
-  $rm -f "${ofile}T"
-
-  echo creating $ofile
-
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS \
-    AR AR_FLAGS CC LD LN_S NM SHELL \
-    reload_flag reload_cmds wl \
-    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
-    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
-    library_names_spec soname_spec \
-    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
-    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
-    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
-    old_striplib striplib file_magic_cmd export_symbols_cmds \
-    deplibs_check_method allow_undefined_flag no_undefined_flag \
-    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
-    global_symbol_to_c_name_address \
-    hardcode_libdir_flag_spec hardcode_libdir_separator  \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
-
-    case $var in
-    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
-    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  cat <<__EOF__ > "${ofile}T"
-#! $SHELL
-
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996-2000 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$need_lc
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# The default C compiler.
-CC=$lt_CC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_pic_flag
-pic_mode=$pic_mode
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_compiler_c_o
-
-# Can we write directly to a .lo ?
-compiler_o_lo=$lt_compiler_o_lo
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_link_static_flag
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "${ofile}T"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | os2*)
-    cat <<'EOF' >> "${ofile}T"
-      # This is a source program that is used to create dlls on Windows
-      # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-	# This is a source program that is used to create import libraries
-	# on Windows for dlls which lack them. Don't remove nor modify the
-	# starting and closing comments
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
-#
-#  This file is part of GNU libtool.
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-#
-# #include <stdio.h>		/* for printf() */
-# #include <unistd.h>		/* for open(), lseek(), read() */
-# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-# #include <string.h>		/* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-#      int fd;
-#      int offset;
-# {
-#   unsigned char b[2];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 2);
-#   return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-#     int fd;
-#     int offset;
-# {
-#   unsigned char b[4];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 4);
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-#      void *ptr;
-# {
-#   unsigned char *b = ptr;
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-#     int argc;
-#     char *argv[];
-# {
-#     int dll;
-#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#     unsigned long export_rva, export_size, nsections, secptr, expptr;
-#     unsigned long name_rvas, nexp;
-#     unsigned char *expdata, *erva;
-#     char *filename, *dll_name;
-#
-#     filename = argv[1];
-#
-#     dll = open(filename, O_RDONLY|O_BINARY);
-#     if (dll < 1)
-# 	return 1;
-#
-#     dll_name = filename;
-#
-#     for (i=0; filename[i]; i++)
-# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-# 	    dll_name = filename + i +1;
-#
-#     pe_header_offset = pe_get32 (dll, 0x3c);
-#     opthdr_ofs = pe_header_offset + 4 + 20;
-#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-#     if (num_entries < 1) /* no exports */
-# 	return 1;
-#
-#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#     export_size = pe_get32 (dll, opthdr_ofs + 100);
-#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#     secptr = (pe_header_offset + 4 + 20 +
-# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-#     expptr = 0;
-#     for (i = 0; i < nsections; i++)
-#     {
-# 	char sname[8];
-# 	unsigned long secptr1 = secptr + 40 * i;
-# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# 	lseek(dll, secptr1, SEEK_SET);
-# 	read(dll, sname, 8);
-# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# 	{
-# 	    expptr = fptr + (export_rva - vaddr);
-# 	    if (export_rva + export_size > vaddr + vsize)
-# 		export_size = vsize - (export_rva - vaddr);
-# 	    break;
-# 	}
-#     }
-#
-#     expdata = (unsigned char*)malloc(export_size);
-#     lseek (dll, expptr, SEEK_SET);
-#     read (dll, expdata, export_size);
-#     erva = expdata - export_rva;
-#
-#     nexp = pe_as32 (expdata+24);
-#     name_rvas = pe_as32 (expdata+32);
-#
-#     printf ("EXPORTS\n");
-#     for (i = 0; i<nexp; i++)
-#     {
-# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#     }
-#
-#     return 0;
-# }
-# /* impgen.c ends here */
-
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
-
-  mv -f "${ofile}T" "$ofile" || \
-    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
-  chmod +x "$ofile"
-fi
-
-
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Prevent multiple expansion
-
-
-
- PERL=""
-if test "X$GCC" = "Xyes"; then
-  for ac_prog in perl
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_PERL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$PERL"; then
-  ac_cv_prog_PERL="$PERL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_PERL="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-PERL=$ac_cv_prog_PERL
-if test -n "$PERL"; then
-  echo "$as_me:$LINENO: result: $PERL" >&5
-echo "${ECHO_T}$PERL" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$PERL" && break
-done
-
-fi
-
-if test -z "$AR"; then
-  for ac_prog in ar xar
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AR="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$AR" && break
-done
-test -n "$AR" || AR=":"
-
-fi
-
-
-if test -z "$SEARCH"; then
-  echo "$as_me:$LINENO: checking how make searches directories" >&5
-echo $ECHO_N "checking how make searches directories... $ECHO_C" >&6
-  while true; do #for break
-        cat >maketest <<EOF
-VPATH=$srcdir/config $srcdir/src $srcdir/bin
-.c.o:
-	cp $< H5_f.o
-
-foo: H5_f.o
-	/bin/rm -f H5_f.o
-	@echo works
-EOF
-
-    if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      SEARCH_RULE='VPATH='
-      SEARCH_SEP=' '
-      echo "$as_me:$LINENO: result: VPATH=DIR1 DIR2 ..." >&5
-echo "${ECHO_T}VPATH=DIR1 DIR2 ..." >&6
-      break
-    fi
-
-            cat >maketest <<EOF
-VPATH=$srcdir/config:$srcdir/src:$srcdir/bin
-.c.o:
-	cp $< H5_f.o
-
-foo: H5_f.o
-	/bin/rm -f H5_f.o
-	@echo works
-EOF
-
-    if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      SEARCH_RULE='VPATH='
-      SEARCH_SEP=':'
-      echo "$as_me:$LINENO: result: VPATH=DIR1:DIR2:..." >&5
-echo "${ECHO_T}VPATH=DIR1:DIR2:..." >&6
-      break
-    fi
-
-        cat >maketest <<EOF
-.PATH: $srcdir/config $srcdir/src $srcdir/bin
-.c.o:
-	cp $< H5_f.o
-
-foo: H5_f.o
-	/bin/rm -f H5_f.o
-	@echo works
-EOF
-
-    if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      SEARCH_RULE='.PATH: '
-      SEARCH_SEP=' '
-      echo "$as_me:$LINENO: result: .PATH: DIR1 DIR2 ..." >&5
-echo "${ECHO_T}.PATH: DIR1 DIR2 ..." >&6
-      break
-    fi
-
-        SEARCH_RULE='## SEARCH DISABLED: '
-    SEARCH_SEP=' '
-    echo "$as_me:$LINENO: result: it doesn't" >&5
-echo "${ECHO_T}it doesn't" >&6
-    if test ! -f configure; then
-      { { echo "$as_me:$LINENO: error: ${MAKE-make} requires the build and source directories to be the same" >&5
-echo "$as_me: error: ${MAKE-make} requires the build and source directories to be the same" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-    break
-  done
-  rm maketest
-fi
-
-echo "$as_me:$LINENO: checking for production mode" >&5
-echo $ECHO_N "checking for production mode... $ECHO_C" >&6
-# Check whether --enable-production or --disable-production was given.
-if test "${enable_production+set}" = set; then
-  enableval="$enable_production"
-
-fi;
-
-case "X-$enable_production" in
-  X-yes)
-    echo "$as_me:$LINENO: result: \"production\"" >&5
-echo "${ECHO_T}\"production\"" >&6
-
-            CFLAGS_temp=""
-    if test -n "$CFLAGS"; then
-      for d in $CFLAGS ; do
-        if test "X$d" != "X-g"; then
-          CFLAGS_temp="$CFLAGS_temp $d"
-        fi
-      done
-      CFLAGS=$CFLAGS_temp
-    fi
-
-    CONFIG_MODE=production
-    CFLAGS="$CFLAGS $PROD_CFLAGS"
-    CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS"
-    ;;
-  X-|X-no)
-    echo "$as_me:$LINENO: result: \"development\"" >&5
-echo "${ECHO_T}\"development\"" >&6
-    CONFIG_MODE=development
-    CFLAGS="$CFLAGS $DEBUG_CFLAGS"
-    CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS"
-    ;;
-  X-pg|X-profile)
-    echo "$as_me:$LINENO: result: \"profile\"" >&5
-echo "${ECHO_T}\"profile\"" >&6
-    CONFIG_MODE=profile
-    CFLAGS="$CXXFLAGS $PROFILE_CFLAGS"
-    CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS"
-    ;;
-  *)
-    echo "$as_me:$LINENO: result: \"user-defined\"" >&5
-echo "${ECHO_T}\"user-defined\"" >&6
-    CONFIG_MODE="$X-enableval"
-    ;;
-esac
-
-
-echo "$as_me:$LINENO: checking for ceil in -lm" >&5
-echo $ECHO_N "checking for ceil in -lm... $ECHO_C" >&6
-if test "${ac_cv_lib_m_ceil+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lm  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char ceil ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-ceil ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_m_ceil=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_m_ceil=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_m_ceil" >&5
-echo "${ECHO_T}$ac_cv_lib_m_ceil" >&6
-if test $ac_cv_lib_m_ceil = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBM 1
-_ACEOF
-
-  LIBS="-lm $LIBS"
-
-fi
-
-
-if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then
-
-echo "$as_me:$LINENO: checking for socket in -lsocket" >&5
-echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6
-if test "${ac_cv_lib_socket_socket+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsocket  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char socket ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-socket ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_socket_socket=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_socket_socket=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5
-echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6
-if test $ac_cv_lib_socket_socket = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBSOCKET 1
-_ACEOF
-
-  LIBS="-lsocket $LIBS"
-
-fi
-
-
-echo "$as_me:$LINENO: checking for xdr_int in -lnsl" >&5
-echo $ECHO_N "checking for xdr_int in -lnsl... $ECHO_C" >&6
-if test "${ac_cv_lib_nsl_xdr_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lnsl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char xdr_int ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-xdr_int ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_nsl_xdr_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_nsl_xdr_int=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_xdr_int" >&5
-echo "${ECHO_T}$ac_cv_lib_nsl_xdr_int" >&6
-if test $ac_cv_lib_nsl_xdr_int = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBNSL 1
-_ACEOF
-
-  LIBS="-lnsl $LIBS"
-
-fi
-
-fi
-
-echo "$as_me:$LINENO: checking if should build only statically linked executables" >&5
-echo $ECHO_N "checking if should build only statically linked executables... $ECHO_C" >&6
-# Check whether --enable-static_exec or --disable-static_exec was given.
-if test "${enable_static_exec+set}" = set; then
-  enableval="$enable_static_exec"
-  STATIC_EXEC=$enableval
-fi;
-
-if test "X$STATIC_EXEC" = "Xyes"; then
-  echo "yes"
-  LT_STATIC_EXEC="-all-static"
-else
-  echo "no"
-  LT_STATIC_EXEC=""
-fi
-
-
-case "$host_cpu-$host_vendor-$host_os" in
-  *linux*)
-                # Check whether --enable-linux-lfs or --disable-linux-lfs was given.
-if test "${enable_linux_lfs+set}" = set; then
-  enableval="$enable_linux_lfs"
-
-fi;
-
-    LINUX_LFS="no"
-    case "X-$enable_linux_lfs" in
-      X-yes)
-        LINUX_LFS=yes
-        ;;
-      X-no)
-        ;;
-      X-|*)
-        MAJOR_VER="`uname -r | cut -d '.' -f1`"
-        MINOR_VER="`uname -r | cut -d '.' -f2`"
-
-        if test ${MAJOR_VER} -gt 2 -o ${MAJOR_VER} -eq 2 -a ${MINOR_VER} -ge 4; then
-          LINUX_LFS="yes"
-        fi
-        ;;
-    esac
-
-    echo "$as_me:$LINENO: checking for large file support mode on Linux" >&5
-echo $ECHO_N "checking for large file support mode on Linux... $ECHO_C" >&6
-    if test "X$LINUX_LFS" = "Xyes"; then
-      echo "$as_me:$LINENO: result: enabled" >&5
-echo "${ECHO_T}enabled" >&6
-      CPPFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $CPPFLAGS"
-    else
-      echo "$as_me:$LINENO: result: disabled" >&5
-echo "${ECHO_T}disabled" >&6
-    fi
-
-                CPPFLAGS="-D_POSIX_SOURCE $CPPFLAGS"
-
-                    CPPFLAGS="-D_BSD_SOURCE $CPPFLAGS"
-    ;;
-esac
-
-for ac_prog in f90 pgf90 xlf90 f95 g95 xlf95
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_F9X+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$F9X"; then
-  ac_cv_prog_F9X="$F9X" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_F9X="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-F9X=$ac_cv_prog_F9X
-if test -n "$F9X"; then
-  echo "$as_me:$LINENO: result: $F9X" >&5
-echo "${ECHO_T}$F9X" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$F9X" && break
-done
-
-test -z "$F9X" && { { echo "$as_me:$LINENO: error: no acceptable f9X compiler found in \$PATH" >&5
-echo "$as_me: error: no acceptable f9X compiler found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-
-
-echo "$as_me:$LINENO: checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works" >&5
-echo $ECHO_N "checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works... $ECHO_C" >&6
-
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-cat > conftest.$ac_ext << EOF
-
-      program conftest
-      end
-
-EOF
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_f9x_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_f9x_cross=no
-  else
-    ac_cv_prog_f9x_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_f9x_works=no
-fi
-rm -fr conftest*
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_works" >&5
-echo "${ECHO_T}$ac_cv_prog_f9x_works" >&6
-if test $ac_cv_prog_f9x_works = no; then
-  { { echo "$as_me:$LINENO: error: installation or configuration problem: Fortran 9X compiler cannot create executables." >&5
-echo "$as_me: error: installation or configuration problem: Fortran 9X compiler cannot create executables." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-echo "$as_me:$LINENO: checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo $ECHO_N "checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_cross" >&5
-echo "${ECHO_T}$ac_cv_prog_f9x_cross" >&6
-cross_compiling=$ac_cv_prog_f9x_cross
-
-echo "$as_me:$LINENO: checking whether we are using GNU Fortran 95" >&5
-echo $ECHO_N "checking whether we are using GNU Fortran 95... $ECHO_C" >&6
-if test "${ac_cv_prog_g9x+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat > conftest.fpp <<EOF
-#ifdef __GNUC__
-  yes
-#endif
-EOF
-if { ac_try='$F9X -E conftest.fpp'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_g9x=yes
-else
-  ac_cv_prog_g9x=no
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_g9x" >&5
-echo "${ECHO_T}$ac_cv_prog_g9x" >&6
-
-if test $ac_cv_prog_g9x = yes; then
-  G9X=yes
-        ac_test_FFLAGS="${FFLAGS+set}"
-  ac_save_FFLAGS="$FFLAGS"
-  FFLAGS=
-  echo "$as_me:$LINENO: checking whether $F9X accepts -g" >&5
-echo $ECHO_N "checking whether $F9X accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_f9x_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat > conftest.f << EOF
-       program conftest
-       end
-EOF
-if test -z "`$F9X -g -c conftest.f 2>&1`"; then
-  ac_cv_prog_f9x_g=yes
-else
-  ac_cv_prog_f9x_g=no
-fi
-rm -f conftest*
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_g" >&5
-echo "${ECHO_T}$ac_cv_prog_f9x_g" >&6
-  if test "$ac_test_FFLAGS" = set; then
-    FFLAGS="$ac_save_FFLAGS"
-  elif test $ac_cv_prog_f9x_g = yes; then
-    FFLAGS="-g -O2"
-  else
-    FFLAGS="-O2"
-  fi
-else
-  G9X=
-  test "${FFLAGS+set}" = set || FFLAGS="-g"
-fi
-
-echo "$as_me:$LINENO: checking what $F9X does with modules" >&5
-echo $ECHO_N "checking what $F9X does with modules... $ECHO_C" >&6
-
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-      module module
-         integer foo
-      end module module
-EOF
-
-eval $ac_compile
-modfiles=""
-F9XMODEXT=""
-
-for f in conftest.o module.mod MODULE.mod module.M MODULE.M; do
-  if test -f "$f" ; then
-    modfiles="$f"
-
-    case "$f" in
-      *.o)   F9XMODEXT="o" ;;
-      *.mod) F9XMODEXT="mod" ;;
-      *.M)   F9XMODEXT="M" ;;
-    esac
-  fi
-done
-
-echo $modfiles 6>&1
-if test "$modfiles" = file.o; then
-  echo $ac_n "checking whether $F9X -em is saner""... $ac_c" 1>&6
-  OLD_FFLAGS=$FFLAGS
-  FFLAGS="$FFLAGS -em"
-  eval $ac_compile
-  modfiles=""
-  for f in file.o module.mod MODULE.mod module.M MODULE.M; do
-    test -f $f && modfiles="$f"
-  done
-  if test "$modfiles" = "file.o"; then
-    FFLAGS=$OLD_FFLAGS
-    echo no 6>&1
-  else
-    echo yes 6>&1
-  fi
-fi
-cd ..
-
-echo "$as_me:$LINENO: checking how $F9X finds modules" >&5
-echo $ECHO_N "checking how $F9X finds modules... $ECHO_C" >&6
-
-for flag in "-I" "-M" "-p"; do
-  cat >conftest.$ac_ext <<EOF
-      program conftest
-          use module
-      end program conftest
-EOF
-
-  ac_compile='${F9X-f90} $FFLAGS ${flag}conftestdir -c conftest.$ac_ext 1>&5'
-
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    F9XMODFLAG=$flag
-    break
-  fi
-done
-
-if test -n "$F9XMODFLAG"; then
-  echo $F9XMODFLAG 1>&6
-  FFLAGS="$F9XMODFLAG. $F9XMODFLAG../src $FFLAGS"
-else
-  echo unknown 1>&6
-fi
-
-
-rm -rf conftest*
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-# Check whether --with-zlib or --without-zlib was given.
-if test "${with_zlib+set}" = set; then
-  withval="$with_zlib"
-
-else
-  withval=yes
-fi;
-
-case $withval in
-  yes)
-    HAVE_ZLIB="yes"
-
-for ac_header in zlib.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- HAVE_ZLIB_H="yes"
-fi
-
-done
-
-
-echo "$as_me:$LINENO: checking for compress2 in -lz" >&5
-echo $ECHO_N "checking for compress2 in -lz... $ECHO_C" >&6
-if test "${ac_cv_lib_z_compress2+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lz  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char compress2 ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-compress2 ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_z_compress2=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_z_compress2=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress2" >&5
-echo "${ECHO_T}$ac_cv_lib_z_compress2" >&6
-if test $ac_cv_lib_z_compress2 = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBZ 1
-_ACEOF
-
-  LIBS="-lz $LIBS"
-
-else
-  unset HAVE_ZLIB
-fi
-
-    echo "$as_me:$LINENO: checking for compress2" >&5
-echo $ECHO_N "checking for compress2... $ECHO_C" >&6
-if test "${ac_cv_func_compress2+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char compress2 (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char compress2 ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_compress2) || defined (__stub___compress2)
-choke me
-#else
-f = compress2;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_compress2=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_compress2=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_compress2" >&5
-echo "${ECHO_T}$ac_cv_func_compress2" >&6
-if test $ac_cv_func_compress2 = yes; then
-  HAVE_COMPRESS2="yes"
-fi
-
-
-    if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
-      { { echo "$as_me:$LINENO: error: couldn't find zlib library" >&5
-echo "$as_me: error: couldn't find zlib library" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-    ;;
-  no)
-    HAVE_ZLIB="no"
-    echo "$as_me:$LINENO: checking for GNU zlib" >&5
-echo $ECHO_N "checking for GNU zlib... $ECHO_C" >&6
-    echo "$as_me:$LINENO: result: suppressed" >&5
-echo "${ECHO_T}suppressed" >&6
-    ;;
-  *)
-    HAVE_ZLIB="yes"
-    case "$withval" in
-      *,*)
-        zlib_inc="`echo $withval |cut -f1 -d,`"
-        zlib_lib="`echo $withval |cut -f2 -d, -s`"
-        ;;
-      *)
-        if test -n "$withval"; then
-          zlib_inc="$withval/include"
-          zlib_lib="$withval/lib"
-        fi
-        ;;
-    esac
-
-            if test "X$zlib_inc" = "X/usr/include"; then
-      zlib_inc=""
-    fi
-    if test "X$zlib_lib" = "X/usr/lib"; then
-      zlib_lib=""
-    fi
-
-    saved_CPPFLAGS="$CPPFLAGS"
-    saved_LDFLAGS="$LDFLAGS"
-
-    if test -n "$zlib_inc"; then
-      CPPFLAGS="$CPPFLAGS -I$zlib_inc"
-    fi
-
-
-for ac_header in zlib.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- HAVE_ZLIB_H="yes"
-else
-  CPPFLAGS="$saved_CPPFLAGS"
-fi
-
-done
-
-
-    if test -n "$zlib_lib"; then
-      LDFLAGS="$LDFLAGS -L$zlib_lib"
-    fi
-
-
-echo "$as_me:$LINENO: checking for compress2 in -lz" >&5
-echo $ECHO_N "checking for compress2 in -lz... $ECHO_C" >&6
-if test "${ac_cv_lib_z_compress2+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lz  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char compress2 ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-compress2 ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_z_compress2=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_z_compress2=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress2" >&5
-echo "${ECHO_T}$ac_cv_lib_z_compress2" >&6
-if test $ac_cv_lib_z_compress2 = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBZ 1
-_ACEOF
-
-  LIBS="-lz $LIBS"
-
-else
-  LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB
-fi
-
-    echo "$as_me:$LINENO: checking for compress2" >&5
-echo $ECHO_N "checking for compress2... $ECHO_C" >&6
-if test "${ac_cv_func_compress2+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char compress2 (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char compress2 ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_compress2) || defined (__stub___compress2)
-choke me
-#else
-f = compress2;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_compress2=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_compress2=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_compress2" >&5
-echo "${ECHO_T}$ac_cv_func_compress2" >&6
-if test $ac_cv_func_compress2 = yes; then
-  HAVE_COMPRESS2="yes"
-fi
-
-
-    if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
-      { { echo "$as_me:$LINENO: error: couldn't find zlib library" >&5
-echo "$as_me: error: couldn't find zlib library" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-    ;;
-esac
-
-if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_FILTER_DEFLATE 1
-_ACEOF
-
-fi
-
-
-# Check whether --with-szlib or --without-szlib was given.
-if test "${with_szlib+set}" = set; then
-  withval="$with_szlib"
-
-else
-  withval=yes
-fi;
-
-case $withval in
-  yes)
-    HAVE_SZLIB="yes"
-
-for ac_header in szlib.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- HAVE_SZLIB_H="yes"
-fi
-
-done
-
-
-echo "$as_me:$LINENO: checking for SZ_BufftoBuffCompress in -lsz" >&5
-echo $ECHO_N "checking for SZ_BufftoBuffCompress in -lsz... $ECHO_C" >&6
-if test "${ac_cv_lib_sz_SZ_BufftoBuffCompress+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsz  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char SZ_BufftoBuffCompress ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-SZ_BufftoBuffCompress ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_sz_SZ_BufftoBuffCompress=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_sz_SZ_BufftoBuffCompress=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_sz_SZ_BufftoBuffCompress" >&5
-echo "${ECHO_T}$ac_cv_lib_sz_SZ_BufftoBuffCompress" >&6
-if test $ac_cv_lib_sz_SZ_BufftoBuffCompress = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBSZ 1
-_ACEOF
-
-  LIBS="-lsz $LIBS"
-
-else
-  unset HAVE_SZLIB
-fi
-
-
-    if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
-      { { echo "$as_me:$LINENO: error: couldn't find szlib library" >&5
-echo "$as_me: error: couldn't find szlib library" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-    ;;
-  no)
-    HAVE_SZLIB="no"
-    echo "$as_me:$LINENO: checking for szlib" >&5
-echo $ECHO_N "checking for szlib... $ECHO_C" >&6
-    echo "$as_me:$LINENO: result: suppressed" >&5
-echo "${ECHO_T}suppressed" >&6
-    ;;
-  *)
-    HAVE_SZLIB="yes"
-    case "$withval" in
-      *,*)
-        szlib_inc="`echo $withval |cut -f1 -d,`"
-        szlib_lib="`echo $withval |cut -f2 -d, -s`"
-        ;;
-      *)
-        if test -n "$withval"; then
-          szlib_inc="$withval/include"
-          szlib_lib="$withval/lib"
-        fi
-        ;;
-    esac
-
-            if test "X$szlib_inc" = "X/usr/include"; then
-      szlib_inc=""
-    fi
-    if test "X$szlib_lib" = "X/usr/lib"; then
-      szlib_lib=""
-    fi
-
-    saved_CPPFLAGS="$CPPFLAGS"
-    saved_LDFLAGS="$LDFLAGS"
-
-    if test -n "$szlib_inc"; then
-      CPPFLAGS="$CPPFLAGS -I$szlib_inc"
-    fi
-
-
-for ac_header in szlib.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- HAVE_SZLIB_H="yes"
-else
-  CPPFLAGS="$saved_CPPFLAGS"
-fi
-
-done
-
-
-    if test -n "$szlib_lib"; then
-      LDFLAGS="$LDFLAGS -L$szlib_lib"
-    fi
-
-
-echo "$as_me:$LINENO: checking for SZ_BufftoBuffCompress in -lsz" >&5
-echo $ECHO_N "checking for SZ_BufftoBuffCompress in -lsz... $ECHO_C" >&6
-if test "${ac_cv_lib_sz_SZ_BufftoBuffCompress+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsz  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char SZ_BufftoBuffCompress ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-SZ_BufftoBuffCompress ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_sz_SZ_BufftoBuffCompress=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_sz_SZ_BufftoBuffCompress=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_sz_SZ_BufftoBuffCompress" >&5
-echo "${ECHO_T}$ac_cv_lib_sz_SZ_BufftoBuffCompress" >&6
-if test $ac_cv_lib_sz_SZ_BufftoBuffCompress = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBSZ 1
-_ACEOF
-
-  LIBS="-lsz $LIBS"
-
-else
-  LDFLAGS="$saved_LDFLAGS"; unset HAVE_SZLIB
-fi
-
-
-    if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
-      { { echo "$as_me:$LINENO: error: couldn't find szlib library" >&5
-echo "$as_me: error: couldn't find szlib library" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-    ;;
-esac
-
-if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_FILTER_SZIP 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for Stream Virtual File Driver support" >&5
-echo $ECHO_N "checking for Stream Virtual File Driver support... $ECHO_C" >&6
-# Check whether --enable-stream-vfd or --disable-stream-vfd was given.
-if test "${enable_stream_vfd+set}" = set; then
-  enableval="$enable_stream_vfd"
-  STREAM_VFD=$enableval
-fi;
-
-if test "$STREAM_VFD" = "yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-
-for ac_header in netinet/tcp.h sys/filio.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STREAM 1
-_ACEOF
-
-
-    echo "$as_me:$LINENO: checking if socklen_t is defined" >&5
-echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-socklen_t foo; return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_SOCKLEN_T 1
-_ACEOF
-
-    echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-else
-  echo "$as_me:$LINENO: result: not configured" >&5
-echo "${ECHO_T}not configured" >&6
-fi
-
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overriden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
-  (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-        "s/'/'\\\\''/g;
-    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-} |
-  sed '
-     t clear
-     : clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if cmp -s $cache_file confcache; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-    cat confcache >$cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-FFLAGS_saved=$FFLAGS
-FFLAGS="$FFLAGS -I."
-
-echo "$as_me:$LINENO: checking if compiler supports -I. option" >&5
-echo $ECHO_N "checking if compiler supports -I. option... $ECHO_C" >&6
-
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-
-      program conftest
-      end
-
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  :
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  :
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-   FFLAGS="$FFLAGS_saved"
-fi
-cd ..
-rm -rf conftest*
-
-
-
-
-
-
-
-case "$F9X" in
-  *mpif90*)
-            PARALLEL=mpif90
-    echo "$as_me:$LINENO: checking for mpirun" >&5
-echo $ECHO_N "checking for mpirun... $ECHO_C" >&6
-
-        cmd=`echo $F9X |cut -f1 -d' '`
-    if (echo $cmd |grep / >/dev/null); then
-      path="`echo $cmd |sed 's/\(.*\)\/.*$/\1/'`"
-    else
-      for path in `echo $PATH |tr : ' '`; do
-        if test -x $path/$cmd; then
-          break;
-        fi
-      done
-    fi
-
-        if test -x $path/mpirun; then
-      echo "$as_me:$LINENO: result: $path/mpirun" >&5
-echo "${ECHO_T}$path/mpirun" >&6
-      RUNSERIAL="${RUNSERIAL:-none}"
-
-      if test -z "$RUNPARALLEL"; then
-        RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=2}"
-      fi
-    else
-      echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6
-    fi
-    ;;
-
-  *mpxlf* | *mpxlf_r* | *mpxlf90* | *mpxlf90_r* | *mpxlf95* | *mpxlf95_r*)
-        PARALLEL="$F9X"
-    ;;
-
-  *)
-            ;;
-esac
-
-echo "$as_me:$LINENO: checking for I/O filters" >&5
-echo $ECHO_N "checking for I/O filters... $ECHO_C" >&6
-# Check whether --enable-filters or --disable-filters was given.
-if test "${enable_filters+set}" = set; then
-  enableval="$enable_filters"
-  FILTERS=$enableval
-fi;
-
-
-all_filters="shuffle,fletcher32"
-case "X-$FILTERS" in
-  X-|X-all)
-    FILTERS=$all_filters
-    echo "$as_me:$LINENO: result: all ($FILTERS)" >&5
-echo "${ECHO_T}all ($FILTERS)" >&6
-    ;;
-  X-no|X-none)
-    echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6
-    FILTERS="none"
-    ;;
-  *)
-    echo "$as_me:$LINENO: result: $FILTERS" >&5
-echo "${ECHO_T}$FILTERS" >&6
-    ;;
-esac
-
-if test -n "$FILTERS"; then
-  for filter in `echo $FILTERS | tr 'a-z,' 'A-Z '`; do
-    if test $filter = "SHUFFLE"; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_FILTER_SHUFFLE 1
-_ACEOF
-
-    fi
-    if test $filter = "FLETCHER32"; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_FILTER_FLETCHER32 1
-_ACEOF
-
-    fi
-  done
-fi
-
-# Check whether --enable-parallel or --disable-parallel was given.
-if test "${enable_parallel+set}" = set; then
-  enableval="$enable_parallel"
-
-fi;
-
-echo "$as_me:$LINENO: checking for parallel support files" >&5
-echo $ECHO_N "checking for parallel support files... $ECHO_C" >&6
-case "X-$enable_parallel" in
-  X-|X-no|X-none)
-                echo "$as_me:$LINENO: result: skipped" >&5
-echo "${ECHO_T}skipped" >&6
-    ;;
-
-  X-yes)
-            echo "$as_me:$LINENO: result: provided by compiler" >&5
-echo "${ECHO_T}provided by compiler" >&6
-    PARALLEL=yes
-
-
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-        program conftest
-          include 'mpif.h'
-
-        call mpi_file_open( ierr )
-        end
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  :
-
-else
-  :
-
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-        program conftest
-
-          include 'mpif.h'
-          call mpi_file_open( ierr )
-        end
-EOF
-
-if test -n "mpi"; then
-  saved_LIBS="$LIBS"
-  LIBS="$LIBS -lmpi"
-fi
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  :
-
-else
-  LIBS="$saved_LIBS"
-  PARALLEL=no
-fi
-cd ..
-rm -rf conftest*
-
-fi
-cd ..
-rm -rf conftest*
-
-
-            if test "X$PARALLEL" = "Xyes"; then
-
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-        program conftest
-          include 'mpif.h'
-
-          call mpi_file_open( ierr )
-        end
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  :
-
-else
-  :
-
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-        program conftest
-
-            include 'mpif.h'
-            call mpi_file_open( ierr )
-        end
-EOF
-
-if test -n "mpio"; then
-  saved_LIBS="$LIBS"
-  LIBS="$LIBS -lmpio"
-fi
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  :
-
-else
-  LIBS="$saved_LIBS"
-  PARALLEL=no
-fi
-cd ..
-rm -rf conftest*
-
-fi
-cd ..
-rm -rf conftest*
-
-    fi
-
-        if test "X$PARALLEL" = "Xyes" && test -z "$RUNPARALLEL"; then
-      RUNPARALLEL="mpirun -np \$\${NPROCS:=2}"
-    fi
-    ;;
-
-  *)
-    echo "$as_me:$LINENO: result: error" >&5
-echo "${ECHO_T}error" >&6
-    { { echo "$as_me:$LINENO: error: \'$enable_parallel\' is not a valid parallel search type" >&5
-echo "$as_me: error: \'$enable_parallel\' is not a valid parallel search type" >&2;}
-   { (exit 1); exit 1; }; }
-    ;;
-esac
-
-if test -n "$PARALLEL"; then
-  TESTPARALLEL=testpar
-fi
-
-ADD_PARALLEL_FILES="no"
-if test -n "$PARALLEL"; then
-    echo "$as_me:$LINENO: checking prefix for running on one processor" >&5
-echo $ECHO_N "checking prefix for running on one processor... $ECHO_C" >&6
-  echo "$as_me:$LINENO: result: $RUNSERIAL" >&5
-echo "${ECHO_T}$RUNSERIAL" >&6
-  echo "$as_me:$LINENO: checking prefix for running in parallel" >&5
-echo $ECHO_N "checking prefix for running in parallel... $ECHO_C" >&6
-  echo "$as_me:$LINENO: result: $RUNPARALLEL" >&5
-echo "${ECHO_T}$RUNPARALLEL" >&6
-
-    echo "$as_me:$LINENO: checking whether a simple MPI-IO program can be linked" >&5
-echo $ECHO_N "checking whether a simple MPI-IO program can be linked... $ECHO_C" >&6
-
-
-ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-
-test -d conftestdir || mkdir conftestdir
-cd conftestdir
-rm -rf *
-
-cat >conftest.$ac_ext <<EOF
-        program conftest
-          include 'mpif.h'
-
-      call mpi_file_open( ierr )
-        end
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  :
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  :
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-            { { echo "$as_me:$LINENO: error: 'unable to link a simple MPI-IO application'" >&5
-echo "$as_me: error: 'unable to link a simple MPI-IO application'" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-cd ..
-rm -rf conftest*
-
-
-      if test -z "$RUNPARALLEL"; then
-    { { echo "$as_me:$LINENO: error: no way to run a parallel program" >&5
-echo "$as_me: error: no way to run a parallel program" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-
-      if test "X$RUNSERIAL" = "Xnone"; then
-    RUNSERIAL=
-  fi
-  if test "X$RUNPARALLEL" = "Xnone"; then
-    RUNPARALLEL=
-  fi
-
-  ADD_PARALLEL_FILES="yes"
-
-  echo "$as_me:$LINENO: checking for MPI_Comm_c2f and MPI_Comm_f2c functions" >&5
-echo $ECHO_N "checking for MPI_Comm_c2f and MPI_Comm_f2c functions... $ECHO_C" >&6
-
-    ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <mpi.h>
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-MPI_Comm c_comm; MPI_Comm_c2f(c_comm)
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MPI_MULTI_LANG_Comm 1
-_ACEOF
-
-    echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-  echo "$as_me:$LINENO: checking for MPI_Info_c2f and MPI_Info_f2c functions" >&5
-echo $ECHO_N "checking for MPI_Info_c2f and MPI_Info_f2c functions... $ECHO_C" >&6
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <mpi.h>
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-MPI_Info c_info; MPI_Info_c2f(c_info)
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MPI_MULTI_LANG_Info 1
-_ACEOF
-
-    echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-    ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-fi
-
-
-echo "$as_me:$LINENO: checking make" >&5
-echo $ECHO_N "checking make... $ECHO_C" >&6
-
-if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\
-      sed -n 1p|cut -c1-8`" = "GNU Make"; then
-  echo "$as_me:$LINENO: result: GNU make" >&5
-echo "${ECHO_T}GNU make" >&6
-  GMAKE=yes
-  if test "X$GCC" = "Xyes"; then
-    DEPEND=config/depend1
-  else
-    DEPEND=config/depend2
-  fi
-else
-  echo "$as_me:$LINENO: result: generic" >&5
-echo "${ECHO_T}generic" >&6
-fi
-
-if test -z "$DEPEND"; then
-  echo "$as_me:$LINENO: checking how to include a makefile" >&5
-echo $ECHO_N "checking how to include a makefile... $ECHO_C" >&6
-
-    cat >makeinc <<EOF
-foo:
-	@:
-EOF
-
-  while true; do             echo '.include <makeinc>' >maketest
-    if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      echo "$as_me:$LINENO: result: .include <FILE>" >&5
-echo "${ECHO_T}.include <FILE>" >&6
-      DEPEND=config/depend3
-      break
-    fi
-
-        echo 'include makeinc' >maketest
-    if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      echo "$as_me:$LINENO: result: include FILE" >&5
-echo "${ECHO_T}include FILE" >&6
-      DEPEND=config/depend4
-      break;
-    fi
-
-        echo "$as_me:$LINENO: result: you have a deficient make command" >&5
-echo "${ECHO_T}you have a deficient make command" >&6
-    DEPEND=config/dependN
-    break
-  done
-  rm makeinc maketest
-fi
-
-# Check whether --enable-gpfs or --disable-gpfs was given.
-if test "${enable_gpfs+set}" = set; then
-  enableval="$enable_gpfs"
-
-else
-  enableval=no
-fi;
-
-case "X-$enableval" in
-  X-yes)
-        ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-for ac_header in gpfs.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- echo "$as_me:$LINENO: checking for GPFS support" >&5
-echo $ECHO_N "checking for GPFS support... $ECHO_C" >&6
-                     cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <gpfs.h>
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-int fd = 0; gpfs_fcntl(fd, (void *)0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_GPFS 1
-_ACEOF
-
-                                    echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                                    LIBS="$LIBS -lgpfs"
-                                    GPFS="yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                                    GPFS="no"
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-done
-
-
-        ac_ext=f90
-ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5'
-ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_f9x_cross
-
-    ;;
-  X-no|*)
-    echo "$as_me:$LINENO: checking for gpfs" >&5
-echo $ECHO_N "checking for gpfs... $ECHO_C" >&6
-    echo "$as_me:$LINENO: result: suppressed" >&5
-echo "${ECHO_T}suppressed" >&6
-    ;;
-esac
-
-rm -f conftest core core.* *.core conftest.o conftest.c dummy.o $ac_clean_files
-
-
-H5_VERSION="`cut -d' ' -f3 $srcdir/../README.txt | head -1`"
-
-
- CONFIG_DATE="`date`"
-
- CONFIG_USER="`whoami`@`hostname`"
-if test -n "$ORGANIZATION"; then
-  CONFIG_USER="$CONFIG_USER at $ORGANIZATION"
-fi
-
-
-
-
-if test "X$ac_cv_c_bigendian" = "Xyes"; then
-  BYTESEX="big-endian"
-else
-  BYTESEX="little-endian"
-fi
-
-PARALLEL=${PARALLEL:-no}
-
-
-if `echo $CC | grep / 2>&1 /dev/null`; then
-  CC_VERSION="$CC"
-else
-  CC_VERSION="$CC";
-  for x in `echo $PATH | sed -e 's/:/ /g'`; do
-    if test -x $x/$CC; then
-      CC_VERSION="$x/$CC"
-      break
-    fi
-  done
-fi
-if test -n "$cc_vendor" && test -n "$cc_version"; then
-  CC_VERSION="$CC_VERSION ($cc_vendor-$cc_version)"
-fi
-
-
-if `echo $F9X | grep / 2>&1 /dev/null`; then
-  FC_VERSION="$F9X"
-else
-  FC_VERSION="$F9X";
-  for x in `echo $PATH | sed -e 's/:/ /g'`; do
-    if test -x $x/$F9X; then
-      FC_VERSION="$x/$F9X"
-      break
-    fi
-  done
-fi
-
- DYNAMIC_DIRS=""
-if test -n "$LDFLAGS"; then
-  for d in $LDFLAGS ; do
-    case "$d" in
-      -L*)
-        d=`echo $d | sed -e 's/-L//g'`
-        case "$d" in
-          .*)
-                                    d=${ROOT}/$d
-            ;;
-        esac
-        DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS"
-        ;;
-    esac
-  done
-fi
-
- COMMENCE=config/commence
- CONCLUDE=config/conclude
-
-if test -z "$SEARCH"; then
-   SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src'
-  cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"'
-  SEARCH="$SEARCH_RULE`eval $cmd`"
-fi
-
-if test "X$GMAKE" = "Xyes"; then
-   SETX=":"
-else
-   SETX="set -x"
-fi
-
-rm -f conftest conftest.o conftest.c core core.* *.core dummy.o
-
-
-mkdir ./config >/dev/null 2>&1
-touch ./config/stamp1
-
-PARALLEL_MAKE=
-
-if test -n "$TESTPARALLEL"; then
-  PARALLEL_MAKE=$TESTPARALLEL/Makefile
-fi
-
-saved_no_create=$no_create
-no_create=yes
-ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/h5fc src/H5fortran_types.f90 src/libhdf5_fortran.settings src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overriden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
-  (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-        "s/'/'\\\\''/g;
-    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-} |
-  sed '
-     t clear
-     : clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if cmp -s $cache_file confcache; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-    cat confcache >$cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ 	]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ 	]*$//;
-}'
-fi
-
-DEFS=-DHAVE_CONFIG_H
-
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-
-# NLS nuisances.
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
-    { $as_unset LANG || test "${LANG+set}" != set; } ||
-      { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
-    { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
-      { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
-    { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
-      { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
-    { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
-      { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
-    { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
-      { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
-    { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
-      { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
-    { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
-      { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
-    { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
-      { LC_MESSAGES=C; export LC_MESSAGES; }
-
-
-# Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conftest.sh
-  echo  "exit 0"   >>conftest.sh
-  chmod +x conftest.sh
-  if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conftest.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by HDF5 Fortran $as_me 1.7.1, which was
-generated by GNU Autoconf 2.53.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-HDF5 Fortran config.status 1.7.1
-configured by $0, generated by GNU Autoconf 2.53,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    shift
-    set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
-    shift
-    ;;
-  -*);;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_need_defaults=false;;
-  esac
-
-  case $1 in
-  # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
-    exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    shift
-    CONFIG_FILES="$CONFIG_FILES $1"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $1"
-    ac_need_defaults=false;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS section.
-#
-
-
-
-_ACEOF
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "config/depend1" ) CONFIG_FILES="$CONFIG_FILES config/depend1" ;;
-  "config/depend2" ) CONFIG_FILES="$CONFIG_FILES config/depend2" ;;
-  "config/depend3" ) CONFIG_FILES="$CONFIG_FILES config/depend3" ;;
-  "config/depend4" ) CONFIG_FILES="$CONFIG_FILES config/depend4" ;;
-  "config/dependN" ) CONFIG_FILES="$CONFIG_FILES config/dependN" ;;
-  "config/commence" ) CONFIG_FILES="$CONFIG_FILES config/commence" ;;
-  "config/conclude" ) CONFIG_FILES="$CONFIG_FILES config/conclude" ;;
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "src/h5fc" ) CONFIG_FILES="$CONFIG_FILES src/h5fc" ;;
-  "src/H5fortran_types.f90" ) CONFIG_FILES="$CONFIG_FILES src/H5fortran_types.f90" ;;
-  "src/libhdf5_fortran.settings" ) CONFIG_FILES="$CONFIG_FILES src/libhdf5_fortran.settings" ;;
-  "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-  "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
-  "$PARALLEL_MAKE" ) CONFIG_FILES="$CONFIG_FILES $PARALLEL_MAKE" ;;
-  "examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;;
-  "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
-  "src/H5config_fortran.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/H5config_fortran.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
-{
-  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=$TMPDIR/cs$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
-   { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@FFLAGS@,$FFLAGS,;t t
-s,@FSEARCH_DIRS@,$FSEARCH_DIRS,;t t
-s,@R_LARGE@,$R_LARGE,;t t
-s,@R_INTEGER@,$R_INTEGER,;t t
-s,@HSIZE_T@,$HSIZE_T,;t t
-s,@HSSIZE_T@,$HSSIZE_T,;t t
-s,@HID_T@,$HID_T,;t t
-s,@SIZE_T@,$SIZE_T,;t t
-s,@OBJECT_NAMELEN_DEFAULT_F@,$OBJECT_NAMELEN_DEFAULT_F,;t t
-s,@ROOT@,$ROOT,;t t
-s,@F9XSUFFIXFLAG@,$F9XSUFFIXFLAG,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@CPP@,$CPP,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@LN_S@,$LN_S,;t t
-s,@ECHO@,$ECHO,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@LIBTOOL@,$LIBTOOL,;t t
-s,@PERL@,$PERL,;t t
-s,@AR@,$AR,;t t
-s,@LT_STATIC_EXEC@,$LT_STATIC_EXEC,;t t
-s,@F9X@,$F9X,;t t
-s,@F9XMODFLAG@,$F9XMODFLAG,;t t
-s,@F9XMODEXT@,$F9XMODEXT,;t t
-s,@PARALLEL@,$PARALLEL,;t t
-s,@RUNSERIAL@,$RUNSERIAL,;t t
-s,@RUNPARALLEL@,$RUNPARALLEL,;t t
-s,@TESTPARALLEL@,$TESTPARALLEL,;t t
-s,@FILTERS@,$FILTERS,;t t
-s,@ADD_PARALLEL_FILES@,$ADD_PARALLEL_FILES,;t t
-/@DEPEND@/r $DEPEND
-s,@DEPEND@,,;t t
-s,@H5_VERSION@,$H5_VERSION,;t t
-s,@CONFIG_DATE@,$CONFIG_DATE,;t t
-s,@CONFIG_USER@,$CONFIG_USER,;t t
-s,@CONFIG_MODE@,$CONFIG_MODE,;t t
-s,@BYTESEX@,$BYTESEX,;t t
-s,@CC_VERSION@,$CC_VERSION,;t t
-s,@FC_VERSION@,$FC_VERSION,;t t
-s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t
-/@COMMENCE@/r $COMMENCE
-s,@COMMENCE@,,;t t
-/@CONCLUDE@/r $CONCLUDE
-s,@CONCLUDE@,,;t t
-s,@SEARCH@,$SEARCH,;t t
-s,@SETX@,$SETX,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-  	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-  	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-        cat >$tmp/stdin
-        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_file" : 'X\(//\)[^/]' \| \
-         X"$ac_file" : 'X\(//\)$' \| \
-         X"$ac_file" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { case "$ac_dir" in
-  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
-  *)                      as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
-  case $as_mkdir_dir in
-    # Skip DOS drivespec
-    ?:) as_incr_dir=$as_mkdir_dir ;;
-    *)
-      as_incr_dir=$as_incr_dir/$as_mkdir_dir
-      test -d "$as_incr_dir" ||
-        mkdir "$as_incr_dir" ||
-	{ { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }
-    ;;
-  esac
-done; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-  esac
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-                                     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-         # Absolute (can't be DOS-style, as IFS=:)
-         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         echo $f;;
-      *) # Relative
-         if test -f "$f"; then
-           # Build tree
-           echo $f
-         elif test -f "$srcdir/$f"; then
-           # Source tree
-           echo $srcdir/$f
-         else
-           # /dev/null tree
-           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='[ 	].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-        cat >$tmp/stdin
-        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-         # Absolute (can't be DOS-style, as IFS=:)
-         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         echo $f;;
-      *) # Relative
-         if test -f "$f"; then
-           # Build tree
-           echo $f
-         elif test -f "$srcdir/$f"; then
-           # Source tree
-           echo $srcdir/$f
-         else
-           # /dev/null tree
-           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[ 	]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*\)\(([^)]*)\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if egrep "^[ 	]*#[ 	]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[ 	]*#[ 	]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo '  fi # egrep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[ 	]*#[ 	]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
-  if test x"$ac_file" != x-; then
-    if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_file" : 'X\(//\)[^/]' \| \
-         X"$ac_file" : 'X\(//\)$' \| \
-         X"$ac_file" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { case "$ac_dir" in
-  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
-  *)                      as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
-  case $as_mkdir_dir in
-    # Skip DOS drivespec
-    ?:) as_incr_dir=$as_mkdir_dir ;;
-    *)
-      as_incr_dir=$as_incr_dir/$as_mkdir_dir
-      test -d "$as_incr_dir" ||
-        mkdir "$as_incr_dir" ||
-	{ { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }
-    ;;
-  esac
-done; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
-    fi
-  else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
-  fi
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_dest" : 'X\(//\)[^/]' \| \
-         X"$ac_dest" : 'X\(//\)$' \| \
-         X"$ac_dest" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    default-1 )
-  echo "creating src/H5pubconf_fortran.h"
-  sed 's/PACKAGE/FORTRAN_PACKAGE/' < src/H5config_fortran.h |\
-    sed 's/#define /#define H5_/' |\
-    sed 's/#undef /#undef H5_/' > pubconf_fortran
-
-  if test ! -f src/H5pubconf_fortran.h; then
-    /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h
-  elif (diff pubconf_fortran src/H5pubconf_fortran.h >/dev/null); then
-    /bin/rm -f pubconf_fortran
-    echo "src/H5pubconf_fortran.h is unchanged"
-  else
-    /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h
-  fi
- ;;
-  esac
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
-fi
-
-no_create=$saved_no_create
-
-touch ./config/stamp2
-
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-chmod 755 src/h5fc
diff --git a/fortran/configure.in b/fortran/configure.in
deleted file mode 100644
index 26aaa34..0000000
--- a/fortran/configure.in
+++ /dev/null
@@ -1,1156 +0,0 @@
-dnl Process this file with autoconf to produce configure.
-dnl
-dnl Copyright by the Board of Trustees of the University of Illinois.
-dnl All rights reserved.
-dnl
-dnl This file is part of HDF5.  The full HDF5 copyright notice, including
-dnl terms governing use, modification, and redistribution, is contained in
-dnl the files COPYING and Copyright.html.  COPYING can be found at the root
-dnl of the source code distribution tree; Copyright.html can be found at the
-dnl root level of an installed copy of the electronic HDF5 document set and
-dnl is linked from the top-level documents page.  It can also be found at
-dnl http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
-dnl access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
-
-dnl ----------------------------------------------------------------------
-dnl Initialize configure.
-dnl
-AC_REVISION($Id$)
-
-dnl AC_INIT takes the name of the package, the version number, and an
-dnl email address to report bugs. AC_CONFIG_SRCDIR takes a unique file
-dnl as its argument.
-dnl
-dnl NOTE: Don't forget to change the version number here when we do a
-dnl release!!!
-dnl
-AC_INIT([HDF5 Fortran], [1.7.1], [hdfhelp@ncsa.uiuc.edu])
-AC_CONFIG_SRCDIR([src/HDF5.f90])
-AC_CONFIG_HEADER([src/H5config_fortran.h])
-
-AC_CONFIG_AUX_DIR([../bin])
-
-AC_OUTPUT_COMMANDS([
-  echo "creating src/H5pubconf_fortran.h"
-  sed 's/PACKAGE/FORTRAN_PACKAGE/' < src/H5config_fortran.h |\
-    sed 's/#define /#define H5_/' |\
-    sed 's/#undef /#undef H5_/' > pubconf_fortran
-
-  if test ! -f src/H5pubconf_fortran.h; then
-    /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h
-  elif (diff pubconf_fortran src/H5pubconf_fortran.h >/dev/null); then
-    /bin/rm -f pubconf_fortran
-    echo "src/H5pubconf_fortran.h is unchanged"
-  else
-    /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h
-  fi
-])
-
-AC_CANONICAL_HOST
-AC_SUBST(CPPFLAGS)
-AC_SUBST(FFLAGS)
-AC_SUBST(FSEARCH_DIRS)
-
-dnl ----------------------------------------------------------------------
-dnl HDF5 integer variables for the H5fortran_types.f90 file.
-dnl
-AC_SUBST(R_LARGE)
-AC_SUBST(R_INTEGER)
-AC_SUBST(HSIZE_T)
-AC_SUBST(HSSIZE_T)
-AC_SUBST(HID_T)
-AC_SUBST(SIZE_T)
-AC_SUBST(OBJECT_NAMELEN_DEFAULT_F)
-
-dnl ----------------------------------------------------------------------
-dnl Dump all shell variables values.
-dnl
-AC_MSG_CHECKING(shell variables initial values)
-set >&5
-AC_MSG_RESULT(done)
-
-dnl ----------------------------------------------------------------------
-dnl Where is the root of the source tree.  Give an absolute address so
-dnl we can find it no matter which directory of the distribution is our
-dnl current directory.  The built-in pwd fails on some systems, but the
-dnl /bin/pwd version works OK.
-dnl
-if test -x "/bin/pwd"; then
-   pwd=/bin/pwd
-else
-   pwd=pwd
-fi
-AC_SUBST(ROOT) ROOT=`$pwd`
-
-dnl ----------------------------------------------------------------------
-dnl Check that the cache file was build on the same host as what we're
-dnl running on now.
-dnl
-AC_CACHE_CHECK(for cached host,hdf5_cv_host,hdf5_cv_host="none");
-if test "X$hdf5_cv_host" = "Xnone"; then
-   hdf5_cv_host=$host
-elif test "$hdf5_cv_host" != "$host"; then
-   echo "The config.cache file was generated on $hdf5_cv_host but"
-   echo "this is $host. Please remove that file and try again."
-   AC_MSG_ERROR(config.cache file is invalid)
-fi
-
-dnl ----------------------------------------------------------------------
-dnl Source any special files that we need.  These files normally aren't
-dnl present but can be used by the maintainers to fine tune things like
-dnl turning on debug or profiling flags for the compiler.  The search order
-dnl is:
-dnl
-dnl	CPU-VENDOR-OS
-dnl	VENDOR-OS
-dnl	CPU-OS
-dnl	CPU-VENDOR
-dnl	OS
-dnl	VENDOR
-dnl	CPU
-dnl
-dnl If the `OS' ends with a version number then remove it. For instance,
-dnl `freebsd3.1' would become `freebsd'
-case "$host_os" in
-   aix4.*)
-      host_os_novers=aix4.x
-      ;;
-   aix5.*)
-      host_os_novers=aix5.x
-      ;;
-   freebsd*)
-      host_os_novers=freebsd
-      ;;
-   irix5.*)
-      host_os_novers=irix5.x
-      ;;
-   irix6.*)
-      host_os_novers=irix6.x
-      ;;
-   osf4.*)
-      host_os_novers=osf4.x
-      ;;
-   osf5.*)
-      host_os_novers=osf5.x
-      ;;
-   solaris2.*)
-      host_os_novers=solaris2.x
-      ;;
-   *)
-      host_os_novers=$host_os
-      ;;
-esac
-
-host_config="none"
-for f in $host_cpu-$host_vendor-$host_os \
-   $host_cpu-$host_vendor-$host_os_novers \
-   $host_vendor-$host_os \
-   $host_vendor-$host_os_novers \
-   $host_cpu-$host_os \
-   $host_cpu-$host_os_novers \
-   $host_cpu-$host_vendor \
-   $host_os \
-   $host_os_novers \
-   $host_vendor \
-   $host_cpu ; do
-   AC_MSG_CHECKING(for config $f)
-   if test -f $srcdir/config/$f; then
-      host_config=$srcdir/config/$f
-      AC_MSG_RESULT(found)
-      break
-   fi
-   AC_MSG_RESULT(no)
-done
-if test "X$host_config" != "Xnone"; then
-   CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`"
-   . $host_config
-fi
-
-AC_SUBST(F9XSUFFIXFLAG)
-
-dnl ----------------------------------------------------------------------
-dnl Check for programs.
-dnl
-AC_PROG_CC
-AC_PROG_CPP	dnl this is checked for when AC_HEADER_STDC is done
-CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`"
-AC_PROG_MAKE_SET
-AC_PROG_INSTALL
-AM_PROG_LIBTOOL
-
-dnl ----------------------------------------------------------------------
-dnl Check if they have Perl installed on their system. We only need Perl
-dnl if they're using a GNU compiler.
-dnl
-AC_SUBST(PERL) PERL=""
-if test "X$GCC" = "Xyes"; then
-  AC_CHECK_PROGS(PERL, perl,, $PATH)
-fi
-
-if test -z "$AR"; then
-  AC_CHECK_PROGS(AR,ar xar,:,$PATH)
-fi
-AC_SUBST(AR)
-
-dnl ----------------------------------------------------------------------
-dnl Sometimes makes think the `.PATH:' appearing before the first rule
-dnl with an action should override the `all' default target. So we have
-dnl to decide what the proper syntax is.
-dnl
-if test -z "$SEARCH"; then
-  AC_MSG_CHECKING(how make searches directories)
-  while true; do #for break
-    dnl The most common method is `VPATH=DIR1 DIR2 ...'
-    cat >maketest <<EOF
-VPATH=$srcdir/config $srcdir/src $srcdir/bin
-.c.o:
-	cp $< H5_f.o
-   
-foo: H5_f.o
-	/bin/rm -f H5_f.o
-	@echo works
-EOF
-   
-    if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      SEARCH_RULE='VPATH='
-      SEARCH_SEP=' '
-      AC_MSG_RESULT([VPATH=DIR1 DIR2 ...])
-      break
-    fi
-   
-    dnl The second most common method is like above except with the
-    dnl directories separated by colons.
-    cat >maketest <<EOF
-VPATH=$srcdir/config:$srcdir/src:$srcdir/bin
-.c.o:
-	cp $< H5_f.o
-   
-foo: H5_f.o
-	/bin/rm -f H5_f.o
-	@echo works
-EOF
-   
-    if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      SEARCH_RULE='VPATH='
-      SEARCH_SEP=':'
-      AC_MSG_RESULT([VPATH=DIR1:DIR2:...])
-      break
-    fi
-   
-    dnl pmake uses the construct `.PATH: DIR1 DIR2
-    cat >maketest <<EOF
-.PATH: $srcdir/config $srcdir/src $srcdir/bin
-.c.o:
-	cp $< H5_f.o
-   
-foo: H5_f.o
-	/bin/rm -f H5_f.o
-	@echo works
-EOF
-
-    if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      SEARCH_RULE='.PATH: '
-      SEARCH_SEP=' '
-      AC_MSG_RESULT([.PATH: DIR1 DIR2 ...])
-      break
-    fi
-   
-    dnl No way for make to search directories
-    SEARCH_RULE='## SEARCH DISABLED: '
-    SEARCH_SEP=' '
-    AC_MSG_RESULT([it doesn't])
-    if test ! -f configure; then
-      AC_MSG_ERROR(${MAKE-make} requires the build and source directories to be the same)
-    fi
-    break
-  done
-  rm maketest
-fi
-
-dnl ----------------------------------------------------------------------
-dnl Production flags?  Save the value in $CONFIG_MODE so we have it for
-dnl the record.
-dnl
-AC_MSG_CHECKING([for production mode])
-AC_ARG_ENABLE([production],
-              [AC_HELP_STRING([--enable-production],
-                              [Determines how to run the compiler.])])
-
-case "X-$enable_production" in
-  X-yes)
-    AC_MSG_RESULT("production")
-
-    dnl Remove the "-g" flag from CFLAGS if it's in there.
-    dnl
-    CFLAGS_temp=""
-    if test -n "$CFLAGS"; then
-      for d in $CFLAGS ; do
-        if test "X$d" != "X-g"; then
-          CFLAGS_temp="$CFLAGS_temp $d"
-        fi
-      done
-      CFLAGS=$CFLAGS_temp
-    fi
-
-    CONFIG_MODE=production
-    CFLAGS="$CFLAGS $PROD_CFLAGS"
-    CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS"
-    ;;
-  X-|X-no)
-    AC_MSG_RESULT("development")
-    CONFIG_MODE=development
-    CFLAGS="$CFLAGS $DEBUG_CFLAGS"
-    CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS"
-    ;;
-  X-pg|X-profile)
-    AC_MSG_RESULT("profile")
-    CONFIG_MODE=profile
-    CFLAGS="$CXXFLAGS $PROFILE_CFLAGS"
-    CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS"
-    ;;
-  *)
-    AC_MSG_RESULT("user-defined")
-    CONFIG_MODE="$X-enableval"
-    ;;
-esac
-
-dnl ----------------------------------------------------------------------
-dnl Check for system libraries.
-dnl
-AC_CHECK_LIB([m], [ceil])
-
-if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then
-  dnl ...for Solaris
-  AC_CHECK_LIB([socket], [socket])
-  AC_CHECK_LIB([nsl], [xdr_int])
-fi
-
-dnl ----------------------------------------------------------------------
-dnl If we should build only static executables
-dnl
-AC_MSG_CHECKING([if should build only statically linked executables])
-AC_ARG_ENABLE([static_exec],
-              [AC_HELP_STRING([--enable-static-exec],
-                              [Build only statically linked executables
-                               [default=no]])],
-              STATIC_EXEC=$enableval)
-
-if test "X$STATIC_EXEC" = "Xyes"; then
-  echo "yes"
-  LT_STATIC_EXEC="-all-static"
-else
-  echo "no"
-  LT_STATIC_EXEC=""
-fi
-AC_SUBST(LT_STATIC_EXEC)
-
-dnl ----------------------------------------------------------------------
-dnl Test for 64bit stuff before the data types and their sizes. The
-dnl result could effect the outcome of the sizeof macros below.
-dnl
-case "$host_cpu-$host_vendor-$host_os" in
-  *linux*)
-    dnl ----------------------------------------------------------------------
-    dnl Enable large file support on linux? Store the result in the LINUX_LFS
-    dnl variable for posterity
-    AC_ARG_ENABLE([linux-lfs],
-                  [AC_HELP_STRING([--enable-linux-lfs],
-                                  [Enable support for large (64-bit)
-                                   files on Linux. [default=check]])])
-
-    LINUX_LFS="no"
-    case "X-$enable_linux_lfs" in
-      X-yes)
-        LINUX_LFS=yes
-        ;;
-      X-no)
-        ;;
-      X-|*)
-        MAJOR_VER="`uname -r | cut -d '.' -f1`"
-        MINOR_VER="`uname -r | cut -d '.' -f2`"
-
-        if test ${MAJOR_VER} -gt 2 -o ${MAJOR_VER} -eq 2 -a ${MINOR_VER} -ge 4; then
-          LINUX_LFS="yes"
-        fi
-        ;;
-    esac
-
-    AC_MSG_CHECKING([for large file support mode on Linux])
-    if test "X$LINUX_LFS" = "Xyes"; then
-      AC_MSG_RESULT([enabled])
-      CPPFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $CPPFLAGS"
-    else
-      AC_MSG_RESULT([disabled])
-    fi
-
-    dnl Add POSIX support on Linux systems, so <features.h> defines
-    dnl __USE_POSIX, which is required to get the prototype for fdopen
-    dnl defined correctly in <stdio.h>
-    CPPFLAGS="-D_POSIX_SOURCE $CPPFLAGS"
-
-    dnl Also add BSD support on Linux systems, so <features.h> defines
-    dnl __USE_BSD, which is required to get the prototype for strdup
-    dnl defined correctly in <string.h> and snprintf & vsnprintf defined
-    dnl correctly in <stdio.h>
-    CPPFLAGS="-D_BSD_SOURCE $CPPFLAGS"
-    ;;
-esac
-
-dnl ----------------------------------------------------------------------
-dnl Check for a Fortran 9X compiler, how to optimize it, and how to
-dnl include modules.
-dnl 
-AC_PROG_F9X
-dnl AC_F9X_OPT_FLAGS
-AC_F9X_MODS
-
-dnl Change back to the C language
-AC_LANG_C
-
-dnl ----------------------------------------------------------------------
-dnl Checks for libraries.
-dnl
-
-dnl ----------------------------------------------------------------------
-dnl Is the GNU zlib present? It has a header file `zlib.h' and a library
-dnl `-lz' and their locations might be specified with the `--with-zlib'
-dnl command-line switch. The value is an include path and/or a library path.
-dnl If the library path is specified then it must be preceded by a comma.
-dnl
-AC_ARG_WITH([zlib],
-            [AC_HELP_STRING([--with-zlib=DIR],
-                            [Use zlib library for external deflate I/O
-                             filter [default=yes]])],,
-            withval=yes)
-
-case $withval in
-  yes)
-    HAVE_ZLIB="yes"
-    AC_CHECK_HEADERS([zlib.h], [HAVE_ZLIB_H="yes"])
-    AC_CHECK_LIB([z], [compress2],, [unset HAVE_ZLIB])
-    AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"])
-
-    if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
-      AC_MSG_ERROR([couldn't find zlib library])
-    fi
-    ;;
-  no)
-    HAVE_ZLIB="no"
-    AC_MSG_CHECKING([for GNU zlib])
-    AC_MSG_RESULT([suppressed])
-    ;;
-  *)
-    HAVE_ZLIB="yes"
-    case "$withval" in
-      *,*)
-        zlib_inc="`echo $withval |cut -f1 -d,`"
-        zlib_lib="`echo $withval |cut -f2 -d, -s`"
-        ;;
-      *)
-        if test -n "$withval"; then
-          zlib_inc="$withval/include"
-          zlib_lib="$withval/lib"
-        fi
-        ;;
-    esac
-
-    dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
-    dnl can mess some compilers up.
-    if test "X$zlib_inc" = "X/usr/include"; then
-      zlib_inc=""
-    fi
-    if test "X$zlib_lib" = "X/usr/lib"; then
-      zlib_lib=""
-    fi
-
-    saved_CPPFLAGS="$CPPFLAGS"
-    saved_LDFLAGS="$LDFLAGS"
-
-    if test -n "$zlib_inc"; then
-      CPPFLAGS="$CPPFLAGS -I$zlib_inc"
-    fi
-
-    AC_CHECK_HEADERS([zlib.h],
-                     [HAVE_ZLIB_H="yes"],
-                     [CPPFLAGS="$saved_CPPFLAGS"])
-
-    if test -n "$zlib_lib"; then
-      LDFLAGS="$LDFLAGS -L$zlib_lib"
-    fi
-
-    AC_CHECK_LIB([z], [compress2],,
-                 [LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB])
-    AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"])
-
-    if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
-      AC_MSG_ERROR([couldn't find zlib library])
-    fi
-    ;;
-esac
-
-if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then
-  AC_DEFINE(HAVE_FILTER_DEFLATE, 1,
-            [Define if support for deflate filter is enabled])
-fi
-
-dnl ----------------------------------------------------------------------
-dnl Is the szlib present? It has a header file `szlib.h' and a library
-dnl `-lsz' and their locations might be specified with the `--with-szlib'
-dnl command-line switch. The value is an include path and/or a library path.
-dnl If the library path is specified then it must be preceded by a comma.
-dnl
-AC_ARG_WITH([szlib],
-            [AC_HELP_STRING([--with-szlib=DIR],
-                            [Use szlib library for external szlib I/O
-                             filter [default=yes]])],,
-            withval=yes)
-
-case $withval in
-  yes)
-    HAVE_SZLIB="yes"
-    AC_CHECK_HEADERS([szlib.h], [HAVE_SZLIB_H="yes"])
-    AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],, [unset HAVE_SZLIB])
-
-    if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
-      AC_MSG_ERROR([couldn't find szlib library])
-    fi
-    ;;
-  no)
-    HAVE_SZLIB="no"
-    AC_MSG_CHECKING([for szlib])
-    AC_MSG_RESULT([suppressed])
-    ;;
-  *)
-    HAVE_SZLIB="yes"
-    case "$withval" in
-      *,*)
-        szlib_inc="`echo $withval |cut -f1 -d,`"
-        szlib_lib="`echo $withval |cut -f2 -d, -s`"
-        ;;
-      *)
-        if test -n "$withval"; then
-          szlib_inc="$withval/include"
-          szlib_lib="$withval/lib"
-        fi
-        ;;
-    esac
-
-    dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
-    dnl can mess some compilers up.
-    if test "X$szlib_inc" = "X/usr/include"; then
-      szlib_inc=""
-    fi
-    if test "X$szlib_lib" = "X/usr/lib"; then
-      szlib_lib=""
-    fi
-
-    saved_CPPFLAGS="$CPPFLAGS"
-    saved_LDFLAGS="$LDFLAGS"
-
-    if test -n "$szlib_inc"; then
-      CPPFLAGS="$CPPFLAGS -I$szlib_inc"
-    fi
-
-    AC_CHECK_HEADERS([szlib.h],
-                     [HAVE_SZLIB_H="yes"],
-                     [CPPFLAGS="$saved_CPPFLAGS"])
-
-    if test -n "$szlib_lib"; then
-      LDFLAGS="$LDFLAGS -L$szlib_lib"
-    fi
-
-    AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],,
-                 [LDFLAGS="$saved_LDFLAGS"; unset HAVE_SZLIB])
-
-    if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
-      AC_MSG_ERROR([couldn't find szlib library])
-    fi
-    ;;
-esac
-
-if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then
-  AC_DEFINE(HAVE_FILTER_SZIP, 1,
-            [Define if support for szip filter is enabled])
-fi
-
-dnl ----------------------------------------------------------------------
-dnl Should the Stream Virtual File Driver be compiled in ?
-dnl
-AC_MSG_CHECKING([for Stream Virtual File Driver support])
-AC_ARG_ENABLE([stream-vfd],
-              [AC_HELP_STRING([--enable-stream-vfd],
-                              [Build the Stream Virtual File Driver
-                               [default=no]])],
-              [STREAM_VFD=$enableval])
-
-if test "$STREAM_VFD" = "yes"; then
-  AC_MSG_RESULT([yes])
-  AC_CHECK_HEADERS([netinet/tcp.h sys/filio.h])
-  AC_DEFINE([HAVE_STREAM], [1],
-            [Define if the stream virtual file driver should be compiled])
-
-  dnl Check if 'socklen_t' available
-  AC_MSG_CHECKING([if socklen_t is defined])
-  AC_TRY_COMPILE([
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-  ],
-    [socklen_t foo; return 0;],
-    AC_DEFINE([HAVE_SOCKLEN_T], 1,
-              [Define if \`socklen_t' is defined])
-    AC_MSG_RESULT([yes]),
-    AC_MSG_RESULT([no])
-  )
-else
-  AC_MSG_RESULT([not configured])
-fi
-
-dnl ----------------------------------------------------------------------
-dnl Checks for header files.
-dnl
-
-dnl Checkpoint the cache
-AC_CACHE_SAVE
-
-dnl Change back to the Fortran 90 language
-AC_LANG_FORTRAN9X
-
-dnl See if the compiler will support the "-I." option
-FFLAGS_saved=$FFLAGS
-FFLAGS="$FFLAGS -I."
-
-AC_MSG_CHECKING(if compiler supports -I. option)
-AC_TRY_FCOMPILE([
-      program conftest
-      end
-], AC_MSG_RESULT(yes),
-   AC_MSG_RESULT(no)
-   FFLAGS="$FFLAGS_saved")
-
-dnl ----------------------------------------------------------------------
-dnl The following variables are used to distinguish between building a
-dnl serial and parallel library.
-dnl
-dnl    HAVE_PARALLEL	-- defined in H5config.h if we are building
-dnl			   a parallel library even if configure wasn't
-dnl			   able to find some header file or library that
-dnl			   might be required. This is defined if the
-dnl			   compiler looks like a parallel compiler (e.g.,
-dnl			   mpif90 or mpf90) or if the user explicitly states
-dnl			   that a parallel library is being built by supplying
-dnl			   the `--enable-parallel' configure switch.
-dnl
-dnl    PARALLEL		-- This variable is set to a non-null value if
-dnl			   configure thinks we're compiling a parallel
-dnl			   version of the library.
-dnl
-dnl    RUNSERIAL	-- This is a command which will be prepended to
-dnl			   the executable name to run the executable using
-dnl			   a single process. For serial versions of the
-dnl			   library this will normally be empty. For parallel
-dnl			   versions it might be something like `mpirun -np 1'.
-dnl			   The value of this variable is substituted in *.in
-dnl			   files.
-dnl
-dnl    RUNPARALLEL	-- This is a command which will be prepended to
-dnl			   the executable name to run the executable on
-dnl			   multiple processors. For the serial library the
-dnl			   value will normally be the empty string. For
-dnl			   parallel library it should be something like
-dnl			   `mpi -np $$NPROCS' where NPROCS will eventually
-dnl			   contain the number of processors on which to run
-dnl			   the executable (the double dollarsigns are to
-dnl			   protect the expansion until make executes the
-dnl			   command).  The value of this variable is
-dnl			   substituted in *.in files.
-dnl
-AC_SUBST(PARALLEL)
-AC_SUBST(RUNSERIAL)
-AC_SUBST(RUNPARALLEL)
-AC_SUBST(TESTPARALLEL)
-
-dnl ----------------------------------------------------------------------
-dnl If the compiler is obviously a parallel compiler then we're building
-dnl a parallel version of hdf5 and should define HAVE_PARALLEL. Furthermore,
-dnl the name of the compiler might tell us how to run the resulting
-dnl executable. For `mpif90' the executable should be run with `mpirun'
-dnl from the same directory as mpif90 if it exists.
-dnl
-case "$F9X" in
-  *mpif90*)
-    dnl The mpich compiler. Use mpirun from the same directory if it
-    dnl exists.
-    PARALLEL=mpif90
-    AC_MSG_CHECKING(for mpirun)
-
-    dnl Find the path where mpif90 is located.
-    cmd=`echo $F9X |cut -f1 -d' '`
-    if (echo $cmd |grep / >/dev/null); then
-      path="`echo $cmd |sed 's/\(.*\)\/.*$/\1/'`"
-    else
-      for path in `echo $PATH |tr : ' '`; do
-        if test -x $path/$cmd; then
-          break;
-        fi
-      done
-    fi
-
-    dnl Is there an mpirun at that path?
-    if test -x $path/mpirun; then
-      AC_MSG_RESULT($path/mpirun)
-      RUNSERIAL="${RUNSERIAL:-none}"
-
-      if test -z "$RUNPARALLEL"; then
-        RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=2}"
-      fi
-    else
-      AC_MSG_RESULT(none)
-    fi
-    ;;
-
-  *mpxlf* | *mpxlf_r* | *mpxlf90* | *mpxlf90_r* | *mpxlf95* | *mpxlf95_r*)
-    dnl The IBM compiler
-    PARALLEL="$F9X"
-    ;;
-
-  *)
-    dnl Probably not a parallel compiler, but if `--enable-parallel'
-    dnl is defined below then we're still building a parallel hdf5.
-    ;;
-esac
-
-dnl ----------------------------------------------------------------------
-dnl Turn on internal I/O filters by setting macros in header files
-dnl Internal I/O filters are contained entirely within the library and do
-dnl not depend on external headers or libraries.  The shuffle filter is
-dnl an example of an internal filter, while the gzip filter is an example of
-dnl an external filter.  Each external filter is controlled with an
-dnl "--with-foo=" configure flag.
-dnl
-AC_MSG_CHECKING(for I/O filters)
-AC_ARG_ENABLE([filters],
-              [AC_HELP_STRING([--enable-filters=all],
-                              [Turn on all internal I/O filters. One may
-                               also specify a comma-separated list of filters
-                               or the word no.  The default is all internal
-                               I/O filters.])],
-              [FILTERS=$enableval])
-
-AC_SUBST([FILTERS])
-dnl Eventually: all_filters="shuffle,foo,bar,baz"
-all_filters="shuffle,fletcher32"
-case "X-$FILTERS" in
-  X-|X-all)
-    FILTERS=$all_filters
-    AC_MSG_RESULT(all ($FILTERS))
-    ;;
-  X-no|X-none)
-    AC_MSG_RESULT(none)
-    FILTERS="none"
-    ;;
-  *)
-    AC_MSG_RESULT($FILTERS)
-    ;;
-esac
-
-if test -n "$FILTERS"; then
-  for filter in `echo $FILTERS | tr 'a-z,' 'A-Z '`; do
-dnl ----------------------------------------------------------------------
-dnl Have to use separate 'if' construct for each filter, so that autoheader
-dnl can detect the AC_DEFINE for each one...
-dnl
-    if test $filter = "SHUFFLE"; then
-        AC_DEFINE(HAVE_FILTER_SHUFFLE, 1,
-                [Define if support for shuffle filter is enabled])
-    fi
-    if test $filter = "FLETCHER32"; then
-        AC_DEFINE(HAVE_FILTER_FLETCHER32, 1,
-                [Define if support for Fletcher32 checksum is enabled])
-    fi
-  done
-fi
-
-dnl ----------------------------------------------------------------------
-dnl What header files and libraries do we have to look for for parallel
-dnl support?  For the most part, search paths are already specified with
-dnl CPPFLAGS and LDFLAGS or are known to the compiler.  If the user says
-dnl `--disable-parallel' but specifies a known parallel compiler (like mpicc
-dnl or mpcc) then parallel support is enabled but configure doesn't search
-dnl for any parallel header files or libraries.
-dnl
-AC_ARG_ENABLE([parallel],
-              [AC_HELP_STRING([--enable-parallel],
-                              [Search for MPI-IO and MPI support files])])
-
-AC_MSG_CHECKING(for parallel support files)
-case "X-$enable_parallel" in
-  X-|X-no|X-none)
-    dnl Either we are not compiling for parallel or the header and library
-    dnl files and locations are known to the compiler (this is the case
-    dnl for a correct installation of mpicc for instance).
-    AC_MSG_RESULT(skipped)
-    ;;
-
-  X-yes)
-    dnl We want to compile a parallel library with a compiler that
-    dnl may already know how to link with MPI and MPI-IO.
-    AC_MSG_RESULT(provided by compiler)
-    PARALLEL=yes
-
-    dnl Try link a simple MPI program.  If fail, try again with -lmpi.
-    AC_TRY_FLINK(mpif.h, [
-        call mpi_file_open( ierr )],,
-        AC_CHECK_FLIB(mpi, [
-          include 'mpif.h'
-          call mpi_file_open( ierr )],, PARALLEL=no))
-
-    dnl Then try link a simple MPI-IO program.  If fail, try again with
-    dnl -lmpio.
-    if test "X$PARALLEL" = "Xyes"; then
-      AC_TRY_FLINK(mpif.h, [
-          call mpi_file_open( ierr )],,
-          AC_CHECK_FLIB(mpio, [
-            include 'mpif.h'
-            call mpi_file_open( ierr )],, PARALLEL=no))
-    fi
-
-    dnl Set RUNPARALLEL to mpirun if not set yet.
-    if test "X$PARALLEL" = "Xyes" && test -z "$RUNPARALLEL"; then
-      RUNPARALLEL="mpirun -np \$\${NPROCS:=2}"
-    fi
-    ;;
-
-  *)
-    AC_MSG_RESULT(error)
-    AC_MSG_ERROR(\'$enable_parallel\' is not a valid parallel search type)
-    ;;
-esac
-
-dnl ----------------------------------------------------------------------
-dnl Should the `testpar' directory participate in the build?
-dnl
-if test -n "$PARALLEL"; then
-  TESTPARALLEL=testpar
-fi
-
-dnl ----------------------------------------------------------------------
-dnl Print some other parallel information and do some sanity checks.
-dnl
-ADD_PARALLEL_FILES="no"
-if test -n "$PARALLEL"; then
-  dnl Display what we found about running programs
-  AC_MSG_CHECKING(prefix for running on one processor)
-  AC_MSG_RESULT($RUNSERIAL)
-  AC_MSG_CHECKING(prefix for running in parallel)
-  AC_MSG_RESULT($RUNPARALLEL)
-
-  dnl Check that we can link a simple MPI and MPI-IO application
-  AC_MSG_CHECKING(whether a simple MPI-IO program can be linked)
-  AC_TRY_FLINK(mpif.h,[
-      call mpi_file_open( ierr )],
-            AC_MSG_RESULT(yes),
-            AC_MSG_RESULT(no)
-            AC_MSG_ERROR('unable to link a simple MPI-IO application'))
-
-  dnl There *must* be some way to run in parallel even if it's just the
-  dnl word `none'.
-  if test -z "$RUNPARALLEL"; then
-    AC_MSG_ERROR(no way to run a parallel program)
-  fi
-
-  dnl If RUNSERIAL or RUNPARALLEL is the word `none' then replace it with
-  dnl the empty string.
-  if test "X$RUNSERIAL" = "Xnone"; then
-    RUNSERIAL=
-  fi
-  if test "X$RUNPARALLEL" = "Xnone"; then
-    RUNPARALLEL=
-  fi
-
-  ADD_PARALLEL_FILES="yes"
-
-  AC_MSG_CHECKING([for MPI_Comm_c2f and MPI_Comm_f2c functions])
-
-  dnl Change to the C language
-  AC_LANG_C
-
-  AC_TRY_LINK([
-#include <mpi.h>
-  ],
-    [MPI_Comm c_comm; MPI_Comm_c2f(c_comm)],
-    AC_DEFINE(HAVE_MPI_MULTI_LANG_Comm, 1,
-              [Define if \`MPI_Comm_c2f' and \`MPI_Comm_f2c' exists])
-    AC_MSG_RESULT(yes),
-    AC_MSG_RESULT(no)
-  )
-
-  AC_MSG_CHECKING([for MPI_Info_c2f and MPI_Info_f2c functions])
-  AC_TRY_LINK([
-#include <mpi.h>
-  ],
-    [MPI_Info c_info; MPI_Info_c2f(c_info)],
-    AC_DEFINE(HAVE_MPI_MULTI_LANG_Info, 1,
-              [Define if \`MPI_Info_c2f' and \`MPI_Info_f2c' exists])
-    AC_MSG_RESULT(yes),
-    AC_MSG_RESULT(no)
-  )
-
-  dnl Change to the Fortran 90 language
-  AC_LANG_FORTRAN9X
-fi
-AC_SUBST(ADD_PARALLEL_FILES)
-
-AC_MSG_CHECKING(make)
-AC_SUBST_FILE(DEPEND)
-if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\
-      sed -n 1p|cut -c1-8`" = "GNU Make"; then
-  AC_MSG_RESULT(GNU make)
-  GMAKE=yes
-  if test "X$GCC" = "Xyes"; then
-    DEPEND=config/depend1
-  else
-    DEPEND=config/depend2
-  fi
-else
-  AC_MSG_RESULT(generic)
-fi
-
-dnl How do we include another file into a Makefile?
-if test -z "$DEPEND"; then
-  AC_MSG_CHECKING(how to include a makefile)
-
-  dnl The include file contains the target for `foo'
-  cat >makeinc <<EOF
-foo:
-	@:
-EOF
-
-  while true; do dnl for break
-    dnl pmake. We have to be careful because some pmake think that the
-    dnl contents of the MAKE environment variable is a target.
-    echo '.include <makeinc>' >maketest
-    if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      AC_MSG_RESULT([.include <FILE>])
-      DEPEND=config/depend3
-      break
-    fi
- 
-    dnl Most make's use `include FILE'
-    echo 'include makeinc' >maketest
-    if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
-      AC_MSG_RESULT(include FILE)
-      DEPEND=config/depend4
-      break;
-    fi
-
-    dnl default
-    AC_MSG_RESULT(you have a deficient make command)
-    DEPEND=config/dependN
-    break
-  done
-  rm makeinc maketest
-fi
-
-dnl ----------------------------------------------------------------------
-dnl Checking to see if GPFS is available on this filesystem
-dnl
-AC_ARG_ENABLE([gpfs],
-              [AC_HELP_STRING([--enable-gpfs],
-                              [Enable GPFS hints for the MPI/POSIX file
-                               driver. [default=no]])],,
-              [enableval=no])
-
-case "X-$enableval" in
-  X-yes)
-    dnl Change to the C language
-    AC_LANG_C
-
-    AC_CHECK_HEADERS([gpfs.h],
-                     AC_MSG_CHECKING([for GPFS support])
-                     AC_TRY_COMPILE([#include <gpfs.h>],
-                                    [int fd = 0; gpfs_fcntl(fd, (void *)0);],
-                                    AC_DEFINE(HAVE_GPFS, 1,
-                                              [Define if we have GPFS support])
-                                    AC_MSG_RESULT(yes)
-                                    LIBS="$LIBS -lgpfs"
-                                    GPFS="yes",
-                                    AC_MSG_RESULT(no)
-                                    GPFS="no"))
-
-    dnl Change back to the Fortran 90 language
-    AC_LANG_FORTRAN9X
-    ;;
-  X-no|*)
-    AC_MSG_CHECKING([for gpfs])
-    AC_MSG_RESULT([suppressed])
-    ;;
-esac
-   
-dnl Some cleanup stuff
-rm -f conftest core core.* *.core conftest.o conftest.c dummy.o $ac_clean_files
-
-dnl ----------------------------------------------------------------------
-dnl Set some variables for general configuration information to be saved
-dnl and installed with the libraries.
-dnl
-
-dnl HDF5 version from the first line of the README.txt file.
-H5_VERSION="`cut -d' ' -f3 $srcdir/../README.txt | head -1`"
-AC_SUBST(H5_VERSION)
-
-dnl Configuration date
-AC_SUBST(CONFIG_DATE) CONFIG_DATE="`date`"
-
-dnl User doing the configuration
-AC_SUBST(CONFIG_USER) CONFIG_USER="`whoami`@`hostname`"
-if test -n "$ORGANIZATION"; then
-  CONFIG_USER="$CONFIG_USER at $ORGANIZATION"
-fi
-
-dnl Configuration mode (production, development, profile, etc) saved above.
-AC_SUBST(CONFIG_MODE)
-
-dnl Byte sex from the AC_C_BIGENDIAN macro.
-AC_SUBST(BYTESEX)
-if test "X$ac_cv_c_bigendian" = "Xyes"; then
-  BYTESEX="big-endian"
-else
-  BYTESEX="little-endian"
-fi
-
-dnl Parallel support? (set above except empty if none)
-PARALLEL=${PARALLEL:-no}
-
-dnl Compiler with version information. This consists of the full path
-dnl name of the compiler and the reported version number.
-AC_SUBST(CC_VERSION)
-if `echo $CC | grep / 2>&1 /dev/null`; then
-  CC_VERSION="$CC"	
-else
-  CC_VERSION="$CC";
-  for x in `echo $PATH | sed -e 's/:/ /g'`; do
-    if test -x $x/$CC; then
-      CC_VERSION="$x/$CC"
-      break
-    fi
-  done
-fi
-if test -n "$cc_vendor" && test -n "$cc_version"; then
-  CC_VERSION="$CC_VERSION ($cc_vendor-$cc_version)"
-fi
-
-AC_SUBST(FC_VERSION)
-if `echo $F9X | grep / 2>&1 /dev/null`; then
-  FC_VERSION="$F9X"	
-else
-  FC_VERSION="$F9X";
-  for x in `echo $PATH | sed -e 's/:/ /g'`; do
-    if test -x $x/$F9X; then
-      FC_VERSION="$x/$F9X"
-      break
-    fi
-  done
-fi
-
-dnl ----------------------------------------------------------------------
-dnl Determine the runtime libraries we may need to include in the
-dnl libtools command so that executables will find the correct dynamic
-dnl libraries.
-dnl 
-AC_SUBST(DYNAMIC_DIRS) DYNAMIC_DIRS=""
-if test -n "$LDFLAGS"; then
-  for d in $LDFLAGS ; do
-    case "$d" in
-      -L*)
-        d=`echo $d | sed -e 's/-L//g'`
-        case "$d" in
-          .*)
-            dnl If the path isn't absolute, make it so by prepending the
-            dnl ROOT directory to it.
-            d=${ROOT}/$d
-            ;;
-        esac
-        DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS"
-        ;;
-    esac
-  done
-fi
-
-dnl ----------------------------------------------------------------------
-dnl Build the Makefiles.  Almost every Makefile.in will begin with the line
-dnl `@COMMENCE@' and end with the line `@CONCLUDE@'.  These lines insert
-dnl various files from the config directory into the Makefile.
-dnl
-AC_SUBST_FILE(COMMENCE) COMMENCE=config/commence
-AC_SUBST_FILE(CONCLUDE) CONCLUDE=config/conclude
-
-dnl The directory search list
-if test -z "$SEARCH"; then
-  AC_SUBST(SEARCH) SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src'
-  cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"'
-  SEARCH="$SEARCH_RULE`eval $cmd`"
-fi
-
-dnl We don't need to say when we're entering directories if we're using
-dnl GNU make becuase make does it for us.
-if test "X$GMAKE" = "Xyes"; then
-  AC_SUBST(SETX) SETX=":"
-else
-  AC_SUBST(SETX) SETX="set -x"
-fi
-
-dnl Some cleanup stuff
-rm -f conftest conftest.o conftest.c core core.* *.core dummy.o
-
-dnl Build config.status, touch the stamp files, and build all the Makefiles.
-dnl The order is such that the first `make' does not need to update any
-dnl configuration information. See config/commence.in for the order in which
-dnl things need to be done.
-
-dnl First the stamp1 file for H5config.h.in
-mkdir ./config >/dev/null 2>&1
-touch ./config/stamp1
-
-PARALLEL_MAKE=
-
-if test -n "$TESTPARALLEL"; then
-  PARALLEL_MAKE=$TESTPARALLEL/Makefile
-fi
-
-dnl Then the config.status file (but not makefiles)
-saved_no_create=$no_create
-no_create=yes
-AC_CONFIG_FILES([config/depend1    
-                 config/depend2
-                 config/depend3
-                 config/depend4
-                 config/dependN
-                 config/commence
-                 config/conclude
-                 Makefile
-                 src/h5fc
-                 src/H5fortran_types.f90
-                 src/libhdf5_fortran.settings
-                 src/Makefile
-                 test/Makefile
-                 $PARALLEL_MAKE
-                 examples/Makefile])
-AC_OUTPUT
-no_create=$saved_no_create
-
-dnl Then the stamp2 file for H5config_fortran.h
-touch ./config/stamp2
-
-dnl Finally the makefiles
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-chmod 755 src/h5fc
diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in
index 601d51a..c4c1882 100644
--- a/fortran/examples/Makefile.in
+++ b/fortran/examples/Makefile.in
@@ -12,11 +12,13 @@
 ## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
 ## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
 ##
-top_srcdir=@top_srcdir@/..
+top_srcdir=@top_srcdir@
 top_builddir=../..
 srcdir=@srcdir@
 @COMMENCE@
 
+HDF_FORTRAN="yes"
+
 hdf5_builddir=$(top_builddir)/src
 
 ## Replace building FC with the just installed h5fc
diff --git a/fortran/src/Dependencies b/fortran/src/Dependencies
index 5e807fa..2afb2ff 100644
--- a/fortran/src/Dependencies
+++ b/fortran/src/Dependencies
@@ -543,5 +543,4 @@ H5FDmpiof.lo: \
    $(top_srcdir)/src/H5FDstream.h \
    $(srcdir)/H5f90i.h \
    $(srcdir)/H5f90proto.h \
-   $(srcdir)/H5Git.h \
-   H5pubconf_fortran.h
+   $(srcdir)/H5Git.h
diff --git a/fortran/src/H5FDmpiof.c b/fortran/src/H5FDmpiof.c
index f5e932f..69a22ec 100644
--- a/fortran/src/H5FDmpiof.c
+++ b/fortran/src/H5FDmpiof.c
@@ -16,7 +16,7 @@
 
 #include "H5f90.h"
 #include <mpi.h> 
-#include "H5pubconf_fortran.h"
+#include "H5pubconf.h"
 
 
 /* Support for C to Fortran translation in MPI */
diff --git a/fortran/src/H5config_fortran.h.in b/fortran/src/H5config_fortran.h.in
deleted file mode 100644
index c37ec5e..0000000
--- a/fortran/src/H5config_fortran.h.in
+++ /dev/null
@@ -1,106 +0,0 @@
-/* src/H5config_fortran.h.in.  Generated from configure.in by autoheader.  */
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define if support for deflate filter is enabled */
-#undef HAVE_FILTER_DEFLATE
-
-/* Define if support for Fletcher32 checksum is enabled */
-#undef HAVE_FILTER_FLETCHER32
-
-/* Define if support for shuffle filter is enabled */
-#undef HAVE_FILTER_SHUFFLE
-
-/* Define if support for szip filter is enabled */
-#undef HAVE_FILTER_SZIP
-
-/* Define if we have GPFS support */
-#undef HAVE_GPFS
-
-/* Define to 1 if you have the <gpfs.h> header file. */
-#undef HAVE_GPFS_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `m' library (-lm). */
-#undef HAVE_LIBM
-
-/* Define to 1 if you have the `nsl' library (-lnsl). */
-#undef HAVE_LIBNSL
-
-/* Define to 1 if you have the `socket' library (-lsocket). */
-#undef HAVE_LIBSOCKET
-
-/* Define to 1 if you have the `sz' library (-lsz). */
-#undef HAVE_LIBSZ
-
-/* Define to 1 if you have the `z' library (-lz). */
-#undef HAVE_LIBZ
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define if `MPI_Comm_c2f' and `MPI_Comm_f2c' exists */
-#undef HAVE_MPI_MULTI_LANG_Comm
-
-/* Define if `MPI_Info_c2f' and `MPI_Info_f2c' exists */
-#undef HAVE_MPI_MULTI_LANG_Info
-
-/* Define to 1 if you have the <netinet/tcp.h> header file. */
-#undef HAVE_NETINET_TCP_H
-
-/* Define if `socklen_t' is defined */
-#undef HAVE_SOCKLEN_T
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define if the stream virtual file driver should be compiled */
-#undef HAVE_STREAM
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/filio.h> header file. */
-#undef HAVE_SYS_FILIO_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <szlib.h> header file. */
-#undef HAVE_SZLIB_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the <zlib.h> header file. */
-#undef HAVE_ZLIB_H
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
diff --git a/fortran/src/H5f90i.h b/fortran/src/H5f90i.h
index 1b5b7ce..663c9b5 100644
--- a/fortran/src/H5f90i.h
+++ b/fortran/src/H5f90i.h
@@ -94,7 +94,8 @@ typedef float             real_f;
 #endif /*IBM6000*/
 
 /* LINUX definitions */
-#if defined(i386) && defined(linux)
+#if (defined(i386) || defined(__i386__)) && (defined(linux) || defined(__linux__))
+
 #define DF_MT             DFMT_LINIX
 typedef char              *_fcd;
 typedef long long         hsize_t_f;
@@ -115,6 +116,7 @@ typedef float             real_f;
 
 /* IA64 LINUX definitions */
 #if defined __ia64
+
 typedef char              *_fcd;
 typedef long              hsize_t_f;
 typedef long              hssize_t_f;
@@ -170,6 +172,7 @@ typedef float         real_f;
 #endif /* IRIX */
 
 #if (defined(SUN) || defined(sun) || defined(__sun__) || defined(__SUNPRO_C)) & !defined(__i386)
+
 #ifdef __STDC__
 #define ANSISUN
 #else /* __STDC__ */
@@ -232,7 +235,7 @@ typedef float            real_f;
 
 #endif /* DEC_ALPHA */
 
-#if defined  __alpha__ && defined __linux__
+#if defined __alpha__ && defined __linux__
 
 #ifndef DEC_ALPHA_LINUX
 #define DEC_ALPHA_LINUX
@@ -291,6 +294,7 @@ typedef float          real_f;
 
 
 #if defined _WINDOWS || defined WIN32
+
 #define GOT_MACHINE 1
 
 #pragma comment( lib, "oldnames" )
diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in
index 80c9945..6b80cc5 100644
--- a/fortran/src/Makefile.in
+++ b/fortran/src/Makefile.in
@@ -13,18 +13,20 @@
 ## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
 ## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
 ##
-top_srcdir=@top_srcdir@/..
+top_srcdir=@top_srcdir@
 top_builddir=../..
 srcdir=@srcdir@
 @COMMENCE@
 
+HDF_FORTRAN="yes"
+
 hdf5_srcdir=$(top_srcdir)/src
 hdf5_builddir=$(top_builddir)/src
 
 TRACE=perl $(top_srcdir)/bin/trace
 
 ## Add `-I.' to the C preprocessor flags.
-CPPFLAGS=-I. -I$(hdf5_builddir) -I$(hdf5_srcdir) @CPPFLAGS@
+CPPFLAGS=-I. -I$(hdf5_builddir) -I$(hdf5_srcdir) -I$(srcdir) @CPPFLAGS@
 
 ## This is our main target
 LIB=libhdf5_fortran.la
@@ -34,7 +36,7 @@ LIB=libhdf5_fortran.la
 DISTCLEAN=H5fortran_types.f90 h5fc libhdf5_fortran.settings
 
 ## Public header files (to be installed)...
-PUB_HDR=H5pubconf_fortran.h
+PUB_HDR=
 PUB_PROGS=h5fc
 
 ## Source and object files for the library
diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in
index 920f06f..811aaaa 100644
--- a/fortran/test/Makefile.in
+++ b/fortran/test/Makefile.in
@@ -13,18 +13,20 @@
 ## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
 ## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
 ##
-top_srcdir=@top_srcdir@/..
+top_srcdir=@top_srcdir@
 top_builddir=../..
 srcdir=@srcdir@
 @COMMENCE@
 
+HDF_FORTRAN="yes"
+
 hdf5_srcdir=$(top_srcdir)/src 
 hdf5_builddir=$(top_builddir)/src
 CPPFLAGS=-I. -I$(hdf5_builddir) -I$(hdf5_srcdir) @CPPFLAGS@
 
 ## Add include directory to the C preprocessor flags and the h5test and hdf5
 ## libraries to the library list.
-LT_LINK_LIB=$(LT) --mode=link $(F9X) -static -rpath $(libdir)
+LT_LINK_FLIB=$(LT) --mode=link $(F9X) -static -rpath $(libdir)
 FLIB=../src/libhdf5_fortran.la
 HDF5LIB=$(hdf5_builddir)/libhdf5.la
 TCLIB=../../test/.libs/libh5test.a
@@ -51,12 +53,12 @@ MOSTLYCLEAN=*.h5 *.tmp
 $(TEST_PROGS): $(LIB) $(FLIB) 
 
 fortranlib_test: $(FORTLIBTEST_OBJ)
-	@$(LT_LINK_FEXE) $(FFLAGS) -o $@ $(FORTLIBTEST_OBJ)  $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB)
+	@$(LT_LINK_FEXE) -static $(FFLAGS) -o $@ $(FORTLIBTEST_OBJ) $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB)
 
 fflush1: fflush1.lo 
-	@$(LT_LINK_FEXE) $(FFLAGS) -o $@ fflush1.lo   $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB)
+	@$(LT_LINK_FEXE) -static $(FFLAGS) -o $@ fflush1.lo $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB)
 
 fflush2: fflush2.lo 
-	@$(LT_LINK_FEXE) $(FFLAGS) -o $@ fflush2.lo   $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB)
+	@$(LT_LINK_FEXE) -static $(FFLAGS) -o $@ fflush2.lo $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB)
 
 @CONCLUDE@
diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in
index 2cf5cef..4397c0d 100644
--- a/fortran/testpar/Makefile.in
+++ b/fortran/testpar/Makefile.in
@@ -1,6 +1,5 @@
 ## HDF5 Fortran Parallel Library Test Makefile(.in)
 ##
-
 ##
 ## Copyright by the Board of Trustees of the University of Illinois.
 ## All rights reserved.
@@ -14,11 +13,13 @@
 ## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
 ## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
 ##
-top_srcdir=@top_srcdir@/..
+top_srcdir=@top_srcdir@
 top_builddir=../..
 srcdir=@srcdir@
 @COMMENCE@
 
+HDF_FORTRAN="yes"
+
 hdf5_builddir=$(top_builddir)/src
 
 ## Add the include directory to the C preprocessor flags the the hdf5 library
@@ -26,8 +27,8 @@ hdf5_builddir=$(top_builddir)/src
 LT_LINK_LIB=$(LT) --mode=link $(F9X) -static -rpath $(libdir)
 LIBFORTRAN=../src/libhdf5_fortran.la
 LIBHDF5=$(hdf5_builddir)/libhdf5.la
-FTLIB = ../test/libh5test_fortran.la
-CTLIB = ../../test/.libs/libh5test.a
+FTLIB=../test/libh5test_fortran.la
+CTLIB=../../test/libh5test.la
 
 ## These tests are parallel
 RUNTEST=$(RUNPARALLEL)
@@ -57,6 +58,6 @@ thyperslab_wr.lo:	    $(srcdir)/thyperslab_wr.f90 thdf5.lo
 ptesthdf5_fortran.lo:	    $(srcdir)/ptesthdf5_fortran.f90 thdf5.lo
 
 ptesthdf5_fortran: thdf5.lo thyperslab_wr.lo ptesthdf5_fortran.lo
-	@$(LT_LINK_FEXE) $(FFLAGS) -o $@ ptesthdf5_fortran.lo thdf5.lo thyperslab_wr.lo  $(FTLIB) $(CTLIB) $(LIBFORTRAN) $(LIBHDF5) $(LIBS)
+	@$(LT_LINK_FEXE) -static $(FFLAGS) -o $@ ptesthdf5_fortran.lo thdf5.lo thyperslab_wr.lo $(FTLIB) $(CTLIB) $(LIBFORTRAN) $(LIBHDF5) $(LIBS)
 
 @CONCLUDE@