[svn-r7131] Purpose: Maintenance for the fifth round of testing

Description: Bumped version number for 1.5.63 after creating a tar ball
             for the next round of testing

Solution:

Platforms tested:

Misc. update:

2 files changed, 741 insertions, 1281 deletions

diff --git a/fortran/configure b/fortran/configure
index 35a4de9..e34a4c3 100755
--- a/fortran/configure
+++ b/fortran/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 # From configure.in Id: configure.in.
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.57 for HDF5 Fortran 1.5.62.
+# Generated by GNU Autoconf 2.53 for HDF5 Fortran 1.5.63.
 #
 # Report bugs to <hdfhelp@ncsa.uiuc.edu>.
 #
@@ -9,6 +9,173 @@
 # Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
+
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) lt_cv_sys_path_separator=';' ;;
+    *)     lt_cv_sys_path_separator=':' ;;
+  esac
+  PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
@@ -17,13 +184,11 @@
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
 
+# NLS nuisances.
 # Support unset when possible.
 if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
   as_unset=unset
@@ -31,42 +196,34 @@ else
   as_unset=false
 fi
 
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
+(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
+    { $as_unset LANG || test "${LANG+set}" != set; } ||
+      { LANG=C; export LANG; }
+(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
+    { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
+      { LC_ALL=C; export LC_ALL; }
+(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
+    { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
+      { LC_TIME=C; export LC_TIME; }
+(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
+    { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
+      { LC_CTYPE=C; export LC_CTYPE; }
+(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
+    { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
+      { LANGUAGE=C; export LANGUAGE; }
+(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
+    { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
+      { LC_COLLATE=C; export LC_COLLATE; }
+(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
+    { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
+      { LC_NUMERIC=C; export LC_NUMERIC; }
+(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
+    { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
+      { LC_MESSAGES=C; export LC_MESSAGES; }
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`(basename "$0") 2>/dev/null ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)$' \| \
@@ -77,7 +234,6 @@ echo X/"$0" |
   	  /^X\/\(\/\).*/{ s//\1/; q; }
   	  s/.*/./; q'`
 
-
 # PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
@@ -88,15 +244,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
 
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+  echo "#! /bin/sh" >conftest.sh
+  echo  "exit 0"   >>conftest.sh
+  chmod +x conftest.sh
+  if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
     PATH_SEPARATOR=';'
   else
     PATH_SEPARATOR=:
   fi
-  rm -f conf$$.sh
+  rm -f conftest.sh
 fi
 
 
@@ -144,8 +300,6 @@ do
   as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
   test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
 	     CONFIG_SHELL=$as_dir/$as_base
 	     export CONFIG_SHELL
 	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
@@ -218,12 +372,6 @@ else
 fi
 rm -f conf$$ conf$$.exe conf$$.file
 
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  as_mkdir_p=false
-fi
-
 as_executable_p="test -f"
 
 # Sed expression to map a string onto a valid CPP name.
@@ -240,166 +388,7 @@ as_nl='
 IFS=" 	$as_nl"
 
 # CDPATH.
-$as_unset CDPATH
-
-
-# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) lt_cv_sys_path_separator=';' ;;
-    *)     lt_cv_sys_path_separator=':' ;;
-  esac
-  PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
+$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
 
 
 # Name of the host.
@@ -413,7 +402,6 @@ exec 6>&1
 # Initializations.
 #
 ac_default_prefix=/usr/local
-ac_config_libobj_dir=.
 cross_compiling=no
 subdirs=
 MFLAGS=
@@ -428,8 +416,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='HDF5 Fortran'
 PACKAGE_TARNAME='hdf5-fortran'
-PACKAGE_VERSION='1.5.62'
-PACKAGE_STRING='HDF5 Fortran 1.5.62'
+PACKAGE_VERSION='1.5.63'
+PACKAGE_STRING='HDF5 Fortran 1.5.63'
 PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu'
 
 ac_unique_file="src/HDF5.f90"
@@ -470,8 +458,6 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CPPFLAGS FFLAGS FSEARCH_DIRS R_LARGE R_INTEGER HSIZE_T HSSIZE_T HID_T SIZE_T OBJECT_NAMELEN_DEFAULT_F ROOT F9XSUFFIXFLAG CC CFLAGS LDFLAGS ac_ct_CC EXEEXT OBJEXT CPP SET_MAKE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP EGREP LIBTOOL PERL AR LT_STATIC_EXEC F9X F9XMODFLAG F9XMODEXT PARALLEL RUNSERIAL RUNPARALLEL TESTPARALLEL FILTERS ADD_PARALLEL_FILES H5_VERSION CONFIG_DATE CONFIG_USER CONFIG_MODE BYTESEX CC_VERSION FC_VERSION DYNAMIC_DIRS SEARCH SETX LIBOBJS LTLIBOBJS'
-ac_subst_files='DEPEND COMMENCE CONCLUDE'
 
 # Initialize some variables set by options.
 ac_init_help=
@@ -895,9 +881,6 @@ if test ! -r $srcdir/$ac_unique_file; then
    { (exit 1); exit 1; }; }
   fi
 fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
 srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
 ac_env_build_alias_set=${build_alias+set}
 ac_env_build_alias_value=$build_alias
@@ -939,7 +922,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures HDF5 Fortran 1.5.62 to adapt to many kinds of systems.
+\`configure' configures HDF5 Fortran 1.5.63 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1000,7 +983,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of HDF5 Fortran 1.5.62:";;
+     short | recursive ) echo "Configuration of HDF5 Fortran 1.5.63:";;
    esac
   cat <<\_ACEOF
 
@@ -1083,7 +1066,7 @@ esac
 # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
 # absolute.
 ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
 ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
 ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
 
@@ -1109,8 +1092,8 @@ fi
 test -n "$ac_init_help" && exit 0
 if $ac_init_version; then
   cat <<\_ACEOF
-HDF5 Fortran configure 1.5.62
-generated by GNU Autoconf 2.57
+HDF5 Fortran configure 1.5.63
+generated by GNU Autoconf 2.53
 
 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
 Free Software Foundation, Inc.
@@ -1124,8 +1107,8 @@ cat >&5 <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by HDF5 Fortran $as_me 1.5.62, which was
-generated by GNU Autoconf 2.57.  Invocation command line was
+It was created by HDF5 Fortran $as_me 1.5.63, which was
+generated by GNU Autoconf 2.53.  Invocation command line was
 
   $ $0 $@
 
@@ -1177,54 +1160,27 @@ _ACEOF
 
 # Keep a trace of the command line.
 # Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
 # Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
 ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
 ac_sep=
-ac_must_keep_next=false
-for ac_pass in 1 2
+for ac_arg
 do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-    2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-        ac_must_keep_next=false # Got value, back to normal.
-      else
-        case $ac_arg in
-          *=* | --config-cache | -C | -disable-* | --disable-* \
-          | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-          | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-          | -with-* | --with-* | -without-* | --without-* | --x)
-            case "$ac_configure_args0 " in
-              "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-            esac
-            ;;
-          -* ) ac_must_keep_next=true ;;
-        esac
-      fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
-      ;;
-    esac
-  done
+  case $ac_arg in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n ) continue ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    continue ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+    ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+  esac
+  case " $ac_configure_args " in
+    *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+    *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+       ac_sep=" " ;;
+  esac
+  # Get rid of the leading space.
 done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
 
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
@@ -1235,7 +1191,6 @@ trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
     echo
-
     cat <<\_ASBOX
 ## ---------------- ##
 ## Cache variables. ##
@@ -1258,35 +1213,6 @@ _ASBOX
     esac;
 }
     echo
-
-    cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
-_ASBOX
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=$`echo $ac_var`
-        echo "$ac_var='"'"'$ac_val'"'"'"
-      done | sort
-      echo
-    fi
-
     if test -s confdefs.h; then
       cat <<\_ASBOX
 ## ----------- ##
@@ -1294,7 +1220,7 @@ _ASBOX
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h | sort
+      sed "/^$/d" confdefs.h
       echo
     fi
     test "$ac_signal" != 0 &&
@@ -1460,8 +1386,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-
-          ac_config_headers="$ac_config_headers src/H5config_fortran.h"
+ac_config_headers="$ac_config_headers src/H5config_fortran.h"
 
 
 ac_aux_dir=
@@ -1490,7 +1415,7 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub"
 ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
 
 
-          ac_config_commands="$ac_config_commands default-1"
+ac_config_commands="$ac_config_commands default-1"
 
 
 # Make sure we can run config.sub.
@@ -1855,7 +1780,9 @@ if test $ac_prog_rejected = yes; then
     # However, it has the same basename, so the bogon will be chosen
     # first if we set CC to just the basename; use the full file name.
     shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+    set dummy "$as_dir/$ac_word" ${1+"$@"}
+    shift
+    ac_cv_prog_CC="$@"
   fi
 fi
 fi
@@ -1960,10 +1887,8 @@ fi
 fi
 
 
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;}
    { (exit 1); exit 1; }; }
 
 # Provide some information about the compiler.
@@ -1988,12 +1913,14 @@ ac_compiler=`set X $ac_compile; echo $2`
 
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -2003,7 +1930,7 @@ main ()
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.exe"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
@@ -2022,39 +1949,26 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
 # Be careful to initialize this variable, since it used to be cached.
 # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
 ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-do
-  test -f "$ac_file" || continue
+for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null;
+                ls a.out conftest 2>/dev/null;
+                ls a.* conftest.* 2>/dev/null`; do
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-        ;;
-    conftest.$ac_ext )
-        # This is the source file.
-        ;;
-    [ab].out )
-        # We found the default executable, but exeext='' is most
-        # certainly right.
-        break;;
-    *.* )
-        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-        # FIXME: I believe we export ac_cv_exeext for Libtool,
-        # but it would be cool to find out if it's true.  Does anybody
-        # maintain Libtool? --akim.
-        export ac_cv_exeext
-        break;;
-    * )
-        break;;
+    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;;
+    a.out ) # We found the default executable, but exeext='' is most
+            # certainly right.
+            break;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+          # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
+          export ac_cv_exeext
+          break;;
+    * ) break;;
   esac
 done
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
+cat conftest.$ac_ext >&5
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5
+echo "$as_me: error: C compiler cannot create executables" >&2;}
    { (exit 77); exit 77; }; }
 fi
 
@@ -2081,11 +1995,9 @@ if test "$cross_compiling" != yes; then
 	cross_compiling=yes
     else
 	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
+If you meant to cross compile, use \`--host'." >&5
 echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
+If you meant to cross compile, use \`--host'." >&2;}
    { (exit 1); exit 1; }; }
     fi
   fi
@@ -2093,7 +2005,7 @@ fi
 echo "$as_me:$LINENO: result: yes" >&5
 echo "${ECHO_T}yes" >&6
 
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
+rm -f a.out a.exe conftest$ac_cv_exeext
 ac_clean_files=$ac_clean_files_save
 # Check the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
@@ -2113,10 +2025,9 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
 # work properly (i.e., refer to `conftest.exe'), while it won't with
 # `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
+for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
           export ac_cv_exeext
           break;;
@@ -2124,10 +2035,8 @@ for ac_file in conftest.exe conftest conftest.*; do
   esac
 done
 else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
+  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -2145,12 +2054,14 @@ if test "${ac_cv_objext+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -2167,19 +2078,16 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (exit $ac_status); }; then
   for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
 done
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
+cat conftest.$ac_ext >&5
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -2196,12 +2104,14 @@ if test "${ac_cv_c_compiler_gnu+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -2228,8 +2138,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_compiler_gnu=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_compiler_gnu=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -2249,12 +2158,14 @@ if test "${ac_cv_prog_cc_g+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -2278,8 +2189,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_cv_prog_cc_g=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_prog_cc_g=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -2301,102 +2211,6 @@ else
     CFLAGS=
   fi
 fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
-  *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
 # Some people use a C++ compiler to compile C.  Since we use `exit',
 # in C++ we need to declare it.  In case someone uses the same compiler
 # for both compiling C and C++ we need to have the C++ compiler decide
@@ -2429,13 +2243,15 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
 do
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <stdlib.h>
 $ac_declaration
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -2459,19 +2275,20 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   :
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 continue
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 $ac_declaration
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -2495,8 +2312,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   break
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
 done
@@ -2509,8 +2325,7 @@ fi
 
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
 ac_ext=c
@@ -2542,28 +2357,18 @@ for ac_c_preproc_warn_flag in '' yes
 do
   # Use a header file that comes with gcc, so configuring glibc
   # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+#include "confdefs.h"
+#include <assert.h>
                      Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2580,8 +2385,7 @@ if test -z "$ac_cpp_err"; then
   :
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   # Broken: fails on valid input.
 continue
 fi
@@ -2591,17 +2395,13 @@ rm -f conftest.err conftest.$ac_ext
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <ac_nonexistent.h>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2619,8 +2419,7 @@ if test -z "$ac_cpp_err"; then
 continue
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   # Passes both tests.
 ac_preproc_ok=:
 break
@@ -2649,28 +2448,18 @@ for ac_c_preproc_warn_flag in '' yes
 do
   # Use a header file that comes with gcc, so configuring glibc
   # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+#include "confdefs.h"
+#include <assert.h>
                      Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2687,8 +2476,7 @@ if test -z "$ac_cpp_err"; then
   :
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   # Broken: fails on valid input.
 continue
 fi
@@ -2698,17 +2486,13 @@ rm -f conftest.err conftest.$ac_ext
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <ac_nonexistent.h>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -2726,8 +2510,7 @@ if test -z "$ac_cpp_err"; then
 continue
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   # Passes both tests.
 ac_preproc_ok=:
 break
@@ -2740,10 +2523,8 @@ rm -f conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then
   :
 else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
+  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -2753,15 +2534,15 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 	CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`"
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
 if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.make <<\_ACEOF
 all:
-	@echo 'ac_maketemp="$(MAKE)"'
+	@echo 'ac_maketemp="${MAKE}"'
 _ACEOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
 eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
@@ -3484,21 +3265,6 @@ echo "${ECHO_T}ok" >&6
 fi
 
 
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
 echo "$as_me:$LINENO: checking for ANSI C header files" >&5
 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
 if test "${ac_cv_header_stdc+set}" = set; then
@@ -3506,59 +3272,48 @@ if test "${ac_cv_header_stdc+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
 #include <string.h>
 #include <float.h>
 
-int
-main ()
-{
-
-  ;
-  return 0;
-}
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
+  egrep -v '^ *\+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
   ac_cv_header_stdc=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
+  cat conftest.$ac_ext >&5
+  ac_cv_header_stdc=no
 fi
-rm -f conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <string.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
+  egrep "memchr" >/dev/null 2>&1; then
   :
 else
   ac_cv_header_stdc=no
@@ -3571,16 +3326,12 @@ if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <stdlib.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
+  egrep "free" >/dev/null 2>&1; then
   :
 else
   ac_cv_header_stdc=no
@@ -3596,18 +3347,13 @@ if test $ac_cv_header_stdc = yes; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <ctype.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
 #else
-# define ISLOWER(c) \
-                   (('a' <= (c) && (c) <= 'i') \
+# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
                      || ('j' <= (c) && (c) <= 'r') \
                      || ('s' <= (c) && (c) <= 'z'))
 # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
@@ -3640,12 +3386,11 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 else
   echo "$as_me: program exited with status $ac_status" >&5
 echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 fi
@@ -3680,11 +3425,7 @@ if eval "test \"\${$as_ac_Header+set}\" = set"; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 $ac_includes_default
 
 #include <$ac_header>
@@ -3704,8 +3445,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   eval "$as_ac_Header=yes"
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 eval "$as_ac_Header=no"
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -3740,11 +3480,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -3763,8 +3499,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -3776,17 +3511,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -3803,8 +3534,7 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -3817,32 +3547,14 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -4183,7 +3895,7 @@ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 4186 "configure"' > conftest.$ac_ext
+  echo '#line 3898 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -4223,12 +3935,14 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
      cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -4252,8 +3966,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   lt_cv_cc_needs_belf=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 lt_cv_cc_needs_belf=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -4561,12 +4274,14 @@ else
     CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
     cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -4605,8 +4320,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
 
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
       lt_cv_prog_cc_pic_works=no
 
 fi
@@ -4649,12 +4363,14 @@ else
   LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -4678,8 +4394,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   lt_cv_prog_cc_static_works=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
   LDFLAGS="$save_LDFLAGS"
@@ -4721,7 +4436,7 @@ chmod -w .
 save_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
 compiler_c_o=no
-if { (eval echo configure:4724: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+if { (eval echo configure:4439: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
   # The compiler can only warn and ignore the option if not recognized
   # So say no if there are warnings
   if test -s out/conftest.err; then
@@ -4763,12 +4478,14 @@ else
   ac_objext=lo
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -4799,8 +4516,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
 
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
   ac_objext="$save_objext"
@@ -4848,12 +4564,14 @@ echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_
   compiler_rtti_exceptions=no
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -4884,8 +4602,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
 
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
   CFLAGS="$save_CFLAGS"
@@ -6124,44 +5841,37 @@ if test "${ac_cv_func_shl_load+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+    which can conflict with char shl_load (); below.  */
+#include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char shl_load ();
+char (*f) ();
+
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
+int
+main ()
+{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
 #if defined (__stub_shl_load) || defined (__stub___shl_load)
 choke me
 #else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
+f = shl_load;
 #endif
 
-int
-main ()
-{
-return f != shl_load;
   ;
   return 0;
 }
@@ -6181,8 +5891,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_func_shl_load=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_func_shl_load=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6201,11 +5910,7 @@ else
 LIBS="-ldld  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -6214,6 +5919,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char shl_load ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -6237,8 +5948,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_dld_shl_load=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_dld_shl_load=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6256,44 +5966,37 @@ if test "${ac_cv_func_dlopen+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+    which can conflict with char dlopen (); below.  */
+#include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char dlopen ();
+char (*f) ();
+
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
+int
+main ()
+{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
 #if defined (__stub_dlopen) || defined (__stub___dlopen)
 choke me
 #else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
+f = dlopen;
 #endif
 
-int
-main ()
-{
-return f != dlopen;
   ;
   return 0;
 }
@@ -6313,8 +6016,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_func_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_func_dlopen=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6333,11 +6035,7 @@ else
 LIBS="-ldl  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -6346,6 +6044,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char dlopen ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -6369,8 +6073,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_dl_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_dl_dlopen=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6390,11 +6093,7 @@ else
 LIBS="-lsvld  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -6403,6 +6102,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char dlopen ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -6426,8 +6131,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_svld_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_svld_dlopen=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6447,11 +6151,7 @@ else
 LIBS="-ldld  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -6460,6 +6160,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char dld_link ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -6483,8 +6189,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_dld_dld_link=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_dld_dld_link=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -6542,7 +6247,7 @@ else
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 6545 "configure"
+#line 6250 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -6640,7 +6345,7 @@ else
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 6643 "configure"
+#line 6348 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -7584,11 +7289,7 @@ else
 LIBS="-lm  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -7597,6 +7298,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char ceil ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -7620,8 +7327,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_m_ceil=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_m_ceil=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -7650,11 +7356,7 @@ else
 LIBS="-lsocket  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -7663,6 +7365,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char socket ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -7686,8 +7394,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_socket_socket=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_socket_socket=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -7714,11 +7421,7 @@ else
 LIBS="-lnsl  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -7727,6 +7430,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char xdr_int ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -7750,8 +7459,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_nsl_xdr_int=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_nsl_xdr_int=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8114,11 +7822,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -8137,8 +7841,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8150,17 +7853,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8177,8 +7876,7 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -8191,32 +7889,14 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -8248,11 +7928,7 @@ else
 LIBS="-lz  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -8261,6 +7937,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char compress2 ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -8284,8 +7966,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_z_compress2=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_z_compress2=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8311,44 +7992,37 @@ if test "${ac_cv_func_compress2+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char compress2 (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+    which can conflict with char compress2 (); below.  */
+#include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char compress2 ();
+char (*f) ();
+
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
+int
+main ()
+{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
 #if defined (__stub_compress2) || defined (__stub___compress2)
 choke me
 #else
-char (*f) () = compress2;
-#endif
-#ifdef __cplusplus
-}
+f = compress2;
 #endif
 
-int
-main ()
-{
-return f != compress2;
   ;
   return 0;
 }
@@ -8368,8 +8042,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_func_compress2=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_func_compress2=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8441,11 +8114,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -8464,8 +8133,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8477,17 +8145,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8504,8 +8168,7 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -8518,32 +8181,14 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -8582,11 +8227,7 @@ else
 LIBS="-lz  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -8595,6 +8236,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char compress2 ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -8618,8 +8265,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_z_compress2=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_z_compress2=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8645,44 +8291,37 @@ if test "${ac_cv_func_compress2+set}" = set; then
 else
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char compress2 (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+    which can conflict with char compress2 (); below.  */
+#include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char compress2 ();
+char (*f) ();
+
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
+int
+main ()
+{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
 #if defined (__stub_compress2) || defined (__stub___compress2)
 choke me
 #else
-char (*f) () = compress2;
-#endif
-#ifdef __cplusplus
-}
+f = compress2;
 #endif
 
-int
-main ()
-{
-return f != compress2;
   ;
   return 0;
 }
@@ -8702,8 +8341,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_func_compress2=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_func_compress2=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -8761,11 +8399,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -8784,8 +8418,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -8797,17 +8430,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -8824,8 +8453,7 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -8838,32 +8466,14 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -8895,11 +8505,7 @@ else
 LIBS="-lsz  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -8908,6 +8514,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char SZ_BufftoBuffCompress ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -8931,8 +8543,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_sz_SZ_BufftoBuffCompress=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_sz_SZ_BufftoBuffCompress=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -9012,11 +8623,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -9035,8 +8642,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -9048,17 +8654,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -9075,8 +8677,7 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -9089,32 +8690,14 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -9153,11 +8736,7 @@ else
 LIBS="-lsz  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -9166,6 +8745,12 @@ extern "C"
 /* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
 char SZ_BufftoBuffCompress ();
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -9189,8 +8774,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   ac_cv_lib_sz_SZ_BufftoBuffCompress=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_cv_lib_sz_SZ_BufftoBuffCompress=no
 fi
 rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
@@ -9256,11 +8840,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -9279,8 +8859,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -9292,17 +8871,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -9319,8 +8894,7 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -9333,32 +8907,14 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -9390,11 +8946,7 @@ _ACEOF
 echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -9408,6 +8960,12 @@ cat >>conftest.$ac_ext <<_ACEOF
 #include <sys/socket.h>
 #endif
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -9437,8 +8995,7 @@ _ACEOF
 echo "${ECHO_T}yes" >&6
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 echo "$as_me:$LINENO: result: no" >&5
 echo "${ECHO_T}no" >&6
 
@@ -9460,7 +9017,7 @@ cat >confcache <<\_ACEOF
 # config.status only pays attention to the cache file if you give it
 # the --recheck option to rerun configure.
 #
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# `ac_cv_env_foo' variables (set or unset) will be overriden when
 # loading this file, other *unset* `ac_cv_foo' will be assigned the
 # following values.
 
@@ -9495,7 +9052,7 @@ _ACEOF
      t end
      /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
      : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
+if cmp -s $cache_file confcache; then :; else
   if test -w $cache_file; then
     test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
     cat confcache >$cache_file
@@ -9928,14 +9485,16 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 #include <mpi.h>
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -9965,8 +9524,7 @@ _ACEOF
 echo "${ECHO_T}yes" >&6
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 echo "$as_me:$LINENO: result: no" >&5
 echo "${ECHO_T}no" >&6
 
@@ -9977,14 +9535,16 @@ rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
 echo $ECHO_N "checking for MPI_Info_c2f and MPI_Info_f2c functions... $ECHO_C" >&6
   cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 
 #include <mpi.h>
 
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -10014,8 +9574,7 @@ _ACEOF
 echo "${ECHO_T}yes" >&6
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 echo "$as_me:$LINENO: result: no" >&5
 echo "${ECHO_T}no" >&6
 
@@ -10116,11 +9675,7 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 $ac_includes_default
 #include <$ac_header>
 _ACEOF
@@ -10139,8 +9694,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 ac_header_compiler=no
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -10152,17 +9706,13 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <$ac_header>
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
+  egrep -v '^ *\+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
@@ -10179,8 +9729,7 @@ if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  cat conftest.$ac_ext >&5
   ac_header_preproc=no
 fi
 rm -f conftest.err conftest.$ac_ext
@@ -10193,32 +9742,14 @@ case $ac_header_compiler:$ac_header_preproc in
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
   no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------ ##
-## Report this to bug-autoconf@gnu.org. ##
-## ------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
 esac
 echo "$as_me:$LINENO: checking for $ac_header" >&5
 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
@@ -10239,12 +9770,14 @@ _ACEOF
 echo $ECHO_N "checking for GPFS support... $ECHO_C" >&6
                      cat >conftest.$ac_ext <<_ACEOF
 #line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+#include "confdefs.h"
 #include <gpfs.h>
+#ifdef F77_DUMMY_MAIN
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+#endif
 int
 main ()
 {
@@ -10276,8 +9809,7 @@ echo "${ECHO_T}yes" >&6
                                     GPFS="yes"
 else
   echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+cat conftest.$ac_ext >&5
 echo "$as_me:$LINENO: result: no" >&5
 echo "${ECHO_T}no" >&6
                                     GPFS="no"
@@ -10401,7 +9933,7 @@ fi
 
 saved_no_create=$no_create
 no_create=yes
-                                                                                                                                                      ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/h5fc src/H5fortran_types.f90 src/libhdf5_fortran.settings src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile"
+ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/h5fc src/H5fortran_types.f90 src/libhdf5_fortran.settings src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -10413,7 +9945,7 @@ cat >confcache <<\_ACEOF
 # config.status only pays attention to the cache file if you give it
 # the --recheck option to rerun configure.
 #
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# `ac_cv_env_foo' variables (set or unset) will be overriden when
 # loading this file, other *unset* `ac_cv_foo' will be assigned the
 # following values.
 
@@ -10448,7 +9980,7 @@ _ACEOF
      t end
      /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
      : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
+if cmp -s $cache_file confcache; then :; else
   if test -w $cache_file; then
     test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
     cat confcache >$cache_file
@@ -10479,21 +10011,6 @@ fi
 
 DEFS=-DHAVE_CONFIG_H
 
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-         sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
 
 : ${CONFIG_STATUS=./config.status}
 ac_clean_files_save=$ac_clean_files
@@ -10508,12 +10025,11 @@ cat >$CONFIG_STATUS <<_ACEOF
 # configure, is in config.log if it exists.
 
 debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
 SHELL=\${CONFIG_SHELL-$SHELL}
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
+
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
@@ -10522,13 +10038,11 @@ cat >>$CONFIG_STATUS <<\_ACEOF
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
 
+# NLS nuisances.
 # Support unset when possible.
 if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
   as_unset=unset
@@ -10536,42 +10050,34 @@ else
   as_unset=false
 fi
 
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
+(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
+    { $as_unset LANG || test "${LANG+set}" != set; } ||
+      { LANG=C; export LANG; }
+(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
+    { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
+      { LC_ALL=C; export LC_ALL; }
+(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
+    { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
+      { LC_TIME=C; export LC_TIME; }
+(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
+    { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
+      { LC_CTYPE=C; export LC_CTYPE; }
+(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
+    { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
+      { LANGUAGE=C; export LANGUAGE; }
+(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
+    { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
+      { LC_COLLATE=C; export LC_COLLATE; }
+(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
+    { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
+      { LC_NUMERIC=C; export LC_NUMERIC; }
+(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
+    { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
+      { LC_MESSAGES=C; export LC_MESSAGES; }
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`(basename "$0") 2>/dev/null ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)$' \| \
@@ -10582,7 +10088,6 @@ echo X/"$0" |
   	  /^X\/\(\/\).*/{ s//\1/; q; }
   	  s/.*/./; q'`
 
-
 # PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
@@ -10593,15 +10098,15 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
 
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+  echo "#! /bin/sh" >conftest.sh
+  echo  "exit 0"   >>conftest.sh
+  chmod +x conftest.sh
+  if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
     PATH_SEPARATOR=';'
   else
     PATH_SEPARATOR=:
   fi
-  rm -f conf$$.sh
+  rm -f conftest.sh
 fi
 
 
@@ -10650,8 +10155,6 @@ do
   as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
   test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
 	     CONFIG_SHELL=$as_dir/$as_base
 	     export CONFIG_SHELL
 	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
@@ -10725,12 +10228,6 @@ else
 fi
 rm -f conf$$ conf$$.exe conf$$.file
 
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  as_mkdir_p=false
-fi
-
 as_executable_p="test -f"
 
 # Sed expression to map a string onto a valid CPP name.
@@ -10747,7 +10244,7 @@ as_nl='
 IFS=" 	$as_nl"
 
 # CDPATH.
-$as_unset CDPATH
+$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
 
 exec 6>&1
 
@@ -10763,8 +10260,8 @@ _ASBOX
 } >&5
 cat >&5 <<_CSEOF
 
-This file was extended by HDF5 Fortran $as_me 1.5.62, which was
-generated by GNU Autoconf 2.57.  Invocation command line was
+This file was extended by HDF5 Fortran $as_me 1.5.63, which was
+generated by GNU Autoconf 2.53.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -10804,7 +10301,6 @@ Usage: $0 [OPTIONS] [FILE]...
 
   -h, --help       print this help, then exit
   -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
   --file=FILE[:TEMPLATE]
@@ -10826,8 +10322,8 @@ _ACEOF
 
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
-HDF5 Fortran config.status 1.5.62
-configured by $0, generated by GNU Autoconf 2.57,
+HDF5 Fortran config.status 1.5.63
+configured by $0, generated by GNU Autoconf 2.53,
   with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
 
 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
@@ -10848,25 +10344,25 @@ do
   --*=*)
     ac_option=`expr "x$1" : 'x\([^=]*\)='`
     ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  -*)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
+    shift
+    set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
+    shift
     ;;
+  -*);;
   *) # This is not an option, so the user has probably given explicit
      # arguments.
-     ac_option=$1
      ac_need_defaults=false;;
   esac
 
-  case $ac_option in
+  case $1 in
   # Handling of the options.
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
+    echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
+    exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
   --version | --vers* | -V )
     echo "$ac_cs_version"; exit 0 ;;
   --he | --h)
@@ -10881,16 +10377,13 @@ Try \`$0 --help' for more information." >&2;}
   --debug | --d* | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    shift
+    CONFIG_FILES="$CONFIG_FILES $1"
     ac_need_defaults=false;;
   --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $1"
     ac_need_defaults=false;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
 
   # This is an error.
   -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
@@ -10905,20 +10398,6 @@ Try \`$0 --help' for more information." >&2;}
   shift
 done
 
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
 _ACEOF
 
 cat >>$CONFIG_STATUS <<_ACEOF
@@ -10970,9 +10449,6 @@ if $ac_need_defaults; then
   test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
 fi
 
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
 # Create a temporary directory, and hook for its removal unless debugging.
 $debug ||
 {
@@ -10981,17 +10457,17 @@ $debug ||
 }
 
 # Create a (secure) tmp directory for tmp files.
-
+: ${TMPDIR=/tmp}
 {
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./confstat$$-$RANDOM
+  tmp=$TMPDIR/cs$$-$RANDOM
   (umask 077 && mkdir $tmp)
 } ||
 {
-   echo "$me: cannot create a temporary directory in ." >&2
+   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
    { (exit 1); exit 1; }
 }
 
@@ -11076,7 +10552,6 @@ s,@RANLIB@,$RANLIB,;t t
 s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
 s,@STRIP@,$STRIP,;t t
 s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@EGREP@,$EGREP,;t t
 s,@LIBTOOL@,$LIBTOOL,;t t
 s,@PERL@,$PERL,;t t
 s,@AR@,$AR,;t t
@@ -11090,6 +10565,8 @@ s,@RUNPARALLEL@,$RUNPARALLEL,;t t
 s,@TESTPARALLEL@,$TESTPARALLEL,;t t
 s,@FILTERS@,$FILTERS,;t t
 s,@ADD_PARALLEL_FILES@,$ADD_PARALLEL_FILES,;t t
+/@DEPEND@/r $DEPEND
+s,@DEPEND@,,;t t
 s,@H5_VERSION@,$H5_VERSION,;t t
 s,@CONFIG_DATE@,$CONFIG_DATE,;t t
 s,@CONFIG_USER@,$CONFIG_USER,;t t
@@ -11098,16 +10575,12 @@ s,@BYTESEX@,$BYTESEX,;t t
 s,@CC_VERSION@,$CC_VERSION,;t t
 s,@FC_VERSION@,$FC_VERSION,;t t
 s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t
-s,@SEARCH@,$SEARCH,;t t
-s,@SETX@,$SETX,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-/@DEPEND@/r $DEPEND
-s,@DEPEND@,,;t t
 /@COMMENCE@/r $COMMENCE
 s,@COMMENCE@,,;t t
 /@CONCLUDE@/r $CONCLUDE
 s,@CONCLUDE@,,;t t
+s,@SEARCH@,$SEARCH,;t t
+s,@SETX@,$SETX,;t t
 CEOF
 
 _ACEOF
@@ -11178,30 +10651,25 @@ echo X"$ac_file" |
   	  /^X\(\/\/\)$/{ s//\1/; q; }
   	  /^X\(\/\).*/{ s//\1/; q; }
   	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$as_dir" : 'X\(//\)[^/]' \| \
-         X"$as_dir" : 'X\(//\)$' \| \
-         X"$as_dir" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
+  { case "$ac_dir" in
+  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
+  *)                      as_incr_dir=.;;
+esac
+as_dummy="$ac_dir"
+for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
+  case $as_mkdir_dir in
+    # Skip DOS drivespec
+    ?:) as_incr_dir=$as_mkdir_dir ;;
+    *)
+      as_incr_dir=$as_incr_dir/$as_mkdir_dir
+      test -d "$as_incr_dir" ||
+        mkdir "$as_incr_dir" ||
+	{ { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }
+    ;;
+  esac
+done; }
 
   ac_builddir=.
 
@@ -11231,7 +10699,7 @@ esac
 # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
 # absolute.
 ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
 ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
 ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
 
@@ -11421,7 +10889,7 @@ _ACEOF
 # Break up conftest.defines because some shells have a limit on the size
 # of here documents, and old seds have small limits too (100 cmds).
 echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[ 	]*#[ 	]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo '  if egrep "^[ 	]*#[ 	]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
 echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
 echo '  :' >>$CONFIG_STATUS
 rm -f conftest.tail
@@ -11445,7 +10913,7 @@ do
   mv conftest.tail conftest.defines
 done
 rm -f conftest.defines
-echo '  fi # grep' >>$CONFIG_STATUS
+echo '  fi # egrep' >>$CONFIG_STATUS
 echo >>$CONFIG_STATUS
 
 # Break up conftest.undefs because some shells have a limit on the size
@@ -11485,7 +10953,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF
   cat $tmp/in >>$tmp/config.h
   rm -f $tmp/in
   if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+    if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
       { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
 echo "$as_me: $ac_file is unchanged" >&6;}
     else
@@ -11501,30 +10969,25 @@ echo X"$ac_file" |
   	  /^X\(\/\/\)$/{ s//\1/; q; }
   	  /^X\(\/\).*/{ s//\1/; q; }
   	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$as_dir" : 'X\(//\)[^/]' \| \
-         X"$as_dir" : 'X\(//\)$' \| \
-         X"$as_dir" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
+      { case "$ac_dir" in
+  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
+  *)                      as_incr_dir=.;;
+esac
+as_dummy="$ac_dir"
+for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
+  case $as_mkdir_dir in
+    # Skip DOS drivespec
+    ?:) as_incr_dir=$as_mkdir_dir ;;
+    *)
+      as_incr_dir=$as_incr_dir/$as_mkdir_dir
+      test -d "$as_incr_dir" ||
+        mkdir "$as_incr_dir" ||
+	{ { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }
+    ;;
+  esac
+done; }
 
       rm -f $ac_file
       mv $tmp/config.h $ac_file
@@ -11583,7 +11046,7 @@ esac
 # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
 # absolute.
 ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
 ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
 ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
 
@@ -11628,11 +11091,8 @@ ac_clean_files=$ac_clean_files_save
 # need to make the FD available again.
 if test "$no_create" != yes; then
   ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
   exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  $SHELL $CONFIG_STATUS || ac_cs_success=false
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
diff --git a/fortran/configure.in b/fortran/configure.in
index 4f3a815..796f601 100644
--- a/fortran/configure.in
+++ b/fortran/configure.in
@@ -24,7 +24,7 @@ dnl
 dnl NOTE: Don't forget to change the version number here when we do a
 dnl release!!!
 dnl
-AC_INIT([HDF5 Fortran], [1.5.62], [hdfhelp@ncsa.uiuc.edu])
+AC_INIT([HDF5 Fortran], [1.5.63], [hdfhelp@ncsa.uiuc.edu])
 AC_CONFIG_SRCDIR([src/HDF5.f90])
 AC_CONFIG_HEADER([src/H5config_fortran.h])