Commit changes for release branch: maintainer mode, default to production, set HDFF5_GENERATE_HEADERS to OFF, and add file generated by autogen.sh.

1 files changed, 1507 insertions, 0 deletions

diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
new file mode 100644
index 0000000..27df09e
--- /dev/null
+++ b/hl/fortran/Makefile.in
@@ -0,0 +1,1507 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
+#
+#
+# This makefile mostly just reinvokes make in the various subdirectories
+# but does so in the correct order.  You can alternatively invoke make from
+# each subdirectory manually.
+#
+# HDF5 High-Level Makefile(.in)
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+TESTS =
+subdir = hl/fortran
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 \
+	$(top_srcdir)/m4/ax_check_class.m4 \
+	$(top_srcdir)/m4/ax_check_classpath.m4 \
+	$(top_srcdir)/m4/ax_check_java_home.m4 \
+	$(top_srcdir)/m4/ax_check_junit.m4 \
+	$(top_srcdir)/m4/ax_java_options.m4 \
+	$(top_srcdir)/m4/ax_jni_include_dir.m4 \
+	$(top_srcdir)/m4/ax_prog_jar.m4 \
+	$(top_srcdir)/m4/ax_prog_java.m4 \
+	$(top_srcdir)/m4/ax_prog_java_works.m4 \
+	$(top_srcdir)/m4/ax_prog_javac.m4 \
+	$(top_srcdir)/m4/ax_prog_javac_works.m4 \
+	$(top_srcdir)/m4/ax_prog_javadoc.m4 \
+	$(top_srcdir)/m4/ax_try_compile_java.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	check recheck distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+TEST_SUITE_LOG = test-suite.log
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/bin/test-driver \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am COPYING
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ @H5_ECFLAGS@
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ @H5_ECXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_JAVACFLAGS = @AM_JAVACFLAGS@
+AM_JAVAFLAGS = @AM_JAVAFLAGS@
+AM_JNIFLAGS = @AM_JNIFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AR_FLAGS = @AR_FLAGS@
+ASSERTS = @ASSERTS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_MODE = @BUILD_MODE@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLANG_SANITIZE_CHECKS = @CLANG_SANITIZE_CHECKS@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DESIRED_FILE_LOCKING = @DESIRED_FILE_LOCKING@
+DEV_WARNINGS = @DEV_WARNINGS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CLASSPATH = @H5_CLASSPATH@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_ECFLAGS = @H5_ECFLAGS@
+H5_ECXXFLAGS = @H5_ECXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_IS_DARWIN = @H5_IS_DARWIN@
+H5_JAVACFLAGS = @H5_JAVACFLAGS@
+H5_JAVAFLAGS = @H5_JAVAFLAGS@
+H5_JNIFLAGS = @H5_JNIFLAGS@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_LIBHDFS = @HAVE_LIBHDFS@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF5_TESTS = @HDF5_TESTS@
+HDF5_TOOLS = @HDF5_TOOLS@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HDF_JAVA = @HDF_JAVA@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+IGNORE_DISABLED_FILE_LOCKS = @IGNORE_DISABLED_FILE_LOCKS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+INTERNAL_DEBUG_OUTPUT = @INTERNAL_DEBUG_OUTPUT@
+JAR = @JAR@
+JAVA = @JAVA@
+JAVAC = @JAVAC@
+JAVACFLAGS = @JAVACFLAGS@
+JAVADOC = @JAVADOC@
+JAVAFLAGS = @JAVAFLAGS@
+JAVAPREFIX = @JAVAPREFIX@
+JAVA_JUNIT = @JAVA_JUNIT@
+JAVA_PATH_NAME = @JAVA_PATH_NAME@
+JAVA_VERSION = @JAVA_VERSION@
+JNIFLAGS = @JNIFLAGS@
+JNI_LDFLAGS = @JNI_LDFLAGS@
+JUNIT = @JUNIT@
+LARGE_PARALLEL_IO = @LARGE_PARALLEL_IO@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MEMORYALLOCSANITYCHECK = @MEMORYALLOCSANITYCHECK@
+MIRROR_VFD = @MIRROR_VFD@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OPTIMIZATION = @OPTIMIZATION@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PAC_FORTRAN_NUM_INTEGER_KINDS = @PAC_FORTRAN_NUM_INTEGER_KINDS@
+PARALLEL = @PARALLEL@
+PARALLEL_FILTERED_WRITES = @PARALLEL_FILTERED_WRITES@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PREADWRITE = @PREADWRITE@
+PROFILING = @PROFILING@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+ROS3_VFD = @ROS3_VFD@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+SYMBOLS = @SYMBOLS@
+TESTPARALLEL = @TESTPARALLEL@
+TESTS_JUNIT = @TESTS_JUNIT@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILE_LOCKING = @USE_FILE_LOCKING@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+_ACJNI_JAVAC = @_ACJNI_JAVAC@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+examplesdir = @examplesdir@
+exec_prefix = @exec_prefix@
+fortran_linux_linker_option = @fortran_linux_linker_option@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5JNI = $(top_builddir)/java/src/jni/libhdf5_java.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below
+# has been removed. According to the official description of DESTDIR by Gnu at
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is
+# prepended to the normal and complete install path that it precedes for the
+# purpose of installing in a temporary directory which is useful for building
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the
+# path then begins with '//', which is incorrect and causes problems at least for
+# Cygwin.
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
+@BUILD_TESTS_CONDITIONAL_FALSE@TESTSERIAL_DIR = 
+@BUILD_TESTS_CONDITIONAL_TRUE@TESTSERIAL_DIR = test
+SUBDIRS = src $(TESTSERIAL_DIR)
+DIST_SUBDIRS = src test examples
+
+# Automake needs to be taught how to build lib, progs and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times.
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST)
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+REALTIMEOUTPUT = $(realtimeOutput)
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/fortran/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hl/fortran/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all 
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile all-local
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am: installcheck-local
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
+	check check-TESTS check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags ctags-am distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installcheck-local installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# Install examples
+install-examples uninstall-examples:
+	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
+
+installcheck-local:
+	@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
+
+# Clean examples when check-clean is invoked
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS) examples; do                                   \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is deprecated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+              if test -n "$(REALTIMEOUTPUT)"; then \
+                 echo "============================" | tee $${log}; \
+              else \
+                 echo "============================" > $${log}; \
+              fi; \
+              if test "X$(FORTRAN_API)" = "Xyes"; then \
+                 echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+                 if test -n "$(REALTIMEOUTPUT)"; then \
+                    echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \
+                 else \
+                    echo "Fortran API: Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \
+                 fi; \
+              elif test "X$(CXX_API)" = "Xyes"; then \
+                 echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+                 if test -n "$(REALTIMEOUTPUT)"; then \
+                    echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log};\
+                 else \
+                    echo "C++ API: Test log for $${tname} $(TEST_FLAGS)" >> $${log};\
+                 fi; \
+              else \
+                 echo "Testing: $${tname} $(TEST_FLAGS)"; \
+                 if test -n "$(REALTIMEOUTPUT)"; then \
+                    echo "Test log for $${tname} $(TEST_FLAGS)" | tee -a $${log}; \
+                 else \
+                    echo "Test log for $${tname} $(TEST_FLAGS)" >> $${log}; \
+                 fi; \
+              fi; \
+              if test -n "$(REALTIMEOUTPUT)"; then \
+                if test -n "$(HDF5_DRIVER)"; then \
+                  echo "Virtual file driver (VFD): $(HDF5_DRIVER)" | tee -a $${log}; \
+                fi; \
+              else \
+                if test -n "$(HDF5_DRIVER)"; then \
+                  echo "Virtual file driver (VFD): $(HDF5_DRIVER)" >> $${log}; \
+                fi; \
+              fi; \
+              if test -n "$(REALTIMEOUTPUT)"; then \
+                 echo "============================" | tee -a $${log}; \
+              else \
+                 echo "============================" >> $${log}; \
+              fi; \
+              if test -n "$(REALTIMEOUTPUT)"; then \
+                 srcdir="$(srcdir)" \
+                 $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) | tee -a $${log} 2>&1 \
+                 && touch $(@:.chkexe_=.chkexe) || \
+                 (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+                 (cat $${log} && false) || exit 1; \
+              else \
+                 srcdir="$(srcdir)" \
+                 $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+                 && touch $(@:.chkexe_=.chkexe) || \
+                 (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+                 (cat $${log} && false) || exit 1; \
+              fi; \
+	      echo "" >> $${log}; \
+              if test -n "$(REALTIMEOUTPUT)"; then \
+                 echo "Finished testing $${tname} $(TEST_FLAGS)" | tee -a $${log}; \
+                 echo "============================" | tee -a $${log}; \
+              else \
+                 echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+                 echo "============================" >> $${log}; \
+              fi; \
+              if test -z "$(REALTIMEOUTPUT)"; then \
+                 cat $${log}; \
+              fi; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. e.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: