[svn-r22709] HDFFV-8129: reconfigured on jam, Remove overloading of autotools TESTS var, rename configure.in to configure.ac, convert test scripts from hard *.sh to configure managed *sh.in files.

Tested: h5committest

5 files changed, 66 insertions, 63 deletions

diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
index ffa3c96..6fe288c 100644
--- a/hl/fortran/Makefile.in
+++ b/hl/fortran/Makefile.in
@@ -77,7 +77,7 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 TESTS =
 subdir = hl/fortran
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
@@ -147,7 +147,7 @@ am__relativize = \
     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
   done; \
   reldir="$$dir2"
-ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
+ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 
@@ -165,12 +165,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
 AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AS = @AS@
-
-# Set the paths for AFS installs of autotools for Linux machines
-# Ideally, these tools should never be needed during the build.
-AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
-AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
-AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
 BYTESEX = @BYTESEX@
 CC = @CC@
@@ -442,6 +439,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
 TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
@@ -822,7 +823,7 @@ check-clean ::
 # build files in this directory.
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
@@ -848,7 +849,7 @@ check-clean ::
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
 
 # make install-doc doesn't do anything outside of doc directory, but
 # Makefiles should recognize it.
@@ -872,7 +873,7 @@ check-install: installcheck
 # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
 # The timestamps give a rough idea how much time the tests use.
 #
-# Note that targets in TESTS (defined above) will be built when the user
+# Note that targets in chk_TESTS (defined above) will be built when the user
 # types 'make tests' or 'make check', but only programs in TEST_PROG,
 # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
 check-TESTS: test
@@ -882,7 +883,7 @@ test _test:
 	@$(MAKE) build-check-p
 
 # Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(TESTS)
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
 	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -972,7 +973,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
 	fi
 
 # Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(TESTS)
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
 	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -1002,7 +1003,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	fi
 
 # Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(TESTS)
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
 	@for vfd in $(VFD_LIST) dummy; do                                     \
 	    if test $$vfd != dummy; then                                      \
 	        echo "============================";                          \
diff --git a/hl/fortran/examples/Makefile.am b/hl/fortran/examples/Makefile.am
index 4286fe3..f94f031 100644
--- a/hl/fortran/examples/Makefile.am
+++ b/hl/fortran/examples/Makefile.am
@@ -23,7 +23,7 @@ include $(top_srcdir)/config/commence.am
 
 # Compile parallel fortran examples only if parallel is enabled
 if BUILD_PARALLEL_CONDITIONAL
-   TEST_PROG_PARA=
+   EXAMPLE_PROG_PARA=
 endif
 
 # These are the programs that 'make all' or 'make tests' will build and
@@ -31,7 +31,7 @@ endif
 # be run.
 # We don't tell automake about these programs so that it doesn't try to
 # compile them with the regular fortran compiler.
-TEST_PROG=exlite ex_ds1
+EXAMPLE_PROG=exlite ex_ds1
 
 # List files to be installed here
 INSTALL_FILES= exlite.f90 ex_ds1.f90
diff --git a/hl/fortran/examples/Makefile.in b/hl/fortran/examples/Makefile.in
index f298a91..b7d8538 100644
--- a/hl/fortran/examples/Makefile.in
+++ b/hl/fortran/examples/Makefile.in
@@ -79,7 +79,7 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 TESTS =
 subdir = hl/fortran/examples
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
@@ -110,7 +110,7 @@ am__tty_colors_dummy = \
   am__color_tests=no
 am__tty_colors = $(am__tty_colors_dummy)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
+ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 
@@ -128,12 +128,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
 AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AS = @AS@
-
-# Set the paths for AFS installs of autotools for Linux machines
-# Ideally, these tools should never be needed during the build.
-AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
-AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
-AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
 BYTESEX = @BYTESEX@
 CC = @CC@
@@ -393,14 +390,14 @@ TRACE = perl $(top_srcdir)/bin/trace
 CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
 
 # Compile parallel fortran examples only if parallel is enabled
-@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = 
+@BUILD_PARALLEL_CONDITIONAL_TRUE@EXAMPLE_PROG_PARA = 
 
 # These are the programs that 'make all' or 'make tests' will build and
 # that 'make check' will run.  List them in the order in which they should
 # be run.
 # We don't tell automake about these programs so that it doesn't try to
 # compile them with the regular fortran compiler.
-TEST_PROG = exlite ex_ds1
+EXAMPLE_PROG = exlite ex_ds1
 
 # List files to be installed here
 INSTALL_FILES = exlite.f90 ex_ds1.f90
@@ -416,8 +413,7 @@ EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/fortran
 
 # Assume that all tests in this directory are examples, and tell
 # conclude.am when to build them.
-EXAMPLE_PROG = $(TEST_PROG_PARA) $(TEST_PROG)
-EXTRA_PROG = $(EXAMPLE_PROG)
+EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA)
 
 # We need to tell automake what to clean
 MOSTLYCLEANFILES = *.raw *.meta *.o
@@ -434,6 +430,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
 TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
@@ -722,7 +722,7 @@ installcheck-local:
 # build files in this directory.
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
@@ -748,7 +748,7 @@ check-clean ::
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
 
 # make install-doc doesn't do anything outside of doc directory, but
 # Makefiles should recognize it.
@@ -772,7 +772,7 @@ check-install: installcheck
 # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
 # The timestamps give a rough idea how much time the tests use.
 #
-# Note that targets in TESTS (defined above) will be built when the user
+# Note that targets in chk_TESTS (defined above) will be built when the user
 # types 'make tests' or 'make check', but only programs in TEST_PROG,
 # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
 check-TESTS: test
@@ -782,7 +782,7 @@ test _test:
 	@$(MAKE) build-check-p
 
 # Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(TESTS)
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
 	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -872,7 +872,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
 	fi
 
 # Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(TESTS)
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
 	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -902,7 +902,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	fi
 
 # Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(TESTS)
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
 	@for vfd in $(VFD_LIST) dummy; do                                     \
 	    if test $$vfd != dummy; then                                      \
 	        echo "============================";                          \
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
index 42cacb6..3af3abd 100644
--- a/hl/fortran/src/Makefile.in
+++ b/hl/fortran/src/Makefile.in
@@ -80,7 +80,7 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 TESTS =
 subdir = hl/fortran/src
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
@@ -191,7 +191,7 @@ am__tty_colors_dummy = \
   am__color_tests=no
 am__tty_colors = $(am__tty_colors_dummy)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
+ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 
@@ -210,12 +210,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1)
 AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AS = @AS@
-
-# Set the paths for AFS installs of autotools for Linux machines
-# Ideally, these tools should never be needed during the build.
-AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
-AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
-AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
 BYTESEX = @BYTESEX@
 CC = @CC@
@@ -513,6 +510,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
 TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
@@ -922,7 +923,7 @@ H5TBff.lo:          $(srcdir)/H5TBff.f90
 # build files in this directory.
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
@@ -948,7 +949,7 @@ check-clean ::
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
 
 # make install-doc doesn't do anything outside of doc directory, but
 # Makefiles should recognize it.
@@ -972,7 +973,7 @@ check-install: installcheck
 # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
 # The timestamps give a rough idea how much time the tests use.
 #
-# Note that targets in TESTS (defined above) will be built when the user
+# Note that targets in chk_TESTS (defined above) will be built when the user
 # types 'make tests' or 'make check', but only programs in TEST_PROG,
 # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
 check-TESTS: test
@@ -982,7 +983,7 @@ test _test:
 	@$(MAKE) build-check-p
 
 # Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(TESTS)
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
 	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -1072,7 +1073,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
 	fi
 
 # Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(TESTS)
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
 	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -1102,7 +1103,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	fi
 
 # Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(TESTS)
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
 	@for vfd in $(VFD_LIST) dummy; do                                     \
 	    if test $$vfd != dummy; then                                      \
 	        echo "============================";                          \
diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in
index 4b10b12..7e69b79 100644
--- a/hl/fortran/test/Makefile.in
+++ b/hl/fortran/test/Makefile.in
@@ -76,10 +76,10 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 # of the HDF5 library.  We do this by passing the -static flag to the linker.
 @FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static
 check_PROGRAMS = $(am__EXEEXT_1)
-TESTS = $(check_PROGRAMS)
+TESTS = $(am__EXEEXT_1)
 subdir = hl/fortran/test
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
@@ -152,7 +152,7 @@ am__tty_colors_dummy = \
   am__color_tests=no
 am__tty_colors = $(am__tty_colors_dummy)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
+ACLOCAL = @ACLOCAL@
 ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
 AMTAR = @AMTAR@
 
@@ -174,12 +174,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1)
 AM_MAKEFLAGS = @AM_MAKEFLAGS@
 AR = @AR@
 AS = @AS@
-
-# Set the paths for AFS installs of autotools for Linux machines
-# Ideally, these tools should never be needed during the build.
-AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
-AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
-AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
 BYTESEX = @BYTESEX@
 CC = @CC@
@@ -466,6 +463,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
 
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
 TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
@@ -781,7 +782,7 @@ help:
 # build files in this directory.
 build-lib: $(LIB)
 build-progs: $(LIB) $(PROGS)
-build-tests: $(LIB) $(PROGS) $(TESTS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
 
 # General rule for recursive building targets.
 # BUILT_SOURCES contain targets that need to be built before anything else
@@ -807,7 +808,7 @@ check-clean ::
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
-all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
 
 # make install-doc doesn't do anything outside of doc directory, but
 # Makefiles should recognize it.
@@ -831,7 +832,7 @@ check-install: installcheck
 # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
 # The timestamps give a rough idea how much time the tests use.
 #
-# Note that targets in TESTS (defined above) will be built when the user
+# Note that targets in chk_TESTS (defined above) will be built when the user
 # types 'make tests' or 'make check', but only programs in TEST_PROG,
 # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
 check-TESTS: test
@@ -841,7 +842,7 @@ test _test:
 	@$(MAKE) build-check-p
 
 # Actual execution of check-s.
-build-check-s: $(LIB) $(PROGS) $(TESTS)
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
 	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -931,7 +932,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
 	fi
 
 # Actual execution of check-p.
-build-check-p: $(LIB) $(PROGS) $(TESTS)
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
 	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
 	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
 	fi
@@ -961,7 +962,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	fi
 
 # Run test with different Virtual File Driver
-check-vfd: $(LIB) $(PROGS) $(TESTS)
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
 	@for vfd in $(VFD_LIST) dummy; do                                     \
 	    if test $$vfd != dummy; then                                      \
 	        echo "============================";                          \