[svn-r11741] Purpose:

Bug fix

Description:
Fortran type generation was broken in two ways.  Fixed both.

Solution:
Firstly, there were a couple of path problems.  Fixed a typo and
specified the full path of a file.
Secondly, the dependencies weren't right when building with HDF5-specific
commands (make lib, make check-s, etc.).  Tweaked dependencies
to fix the problem.

Platforms tested:
mir, modi4, sleipnir

10 files changed, 160 insertions, 60 deletions

diff --git a/hl/Makefile.in b/hl/Makefile.in
index 3809deb..005019d 100755
--- a/hl/Makefile.in
+++ b/hl/Makefile.in
@@ -664,13 +664,14 @@ check-install: installcheck
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -678,6 +679,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
diff --git a/hl/c++/Makefile.in b/hl/c++/Makefile.in
index 6f9983d..3042d0e 100644
--- a/hl/c++/Makefile.in
+++ b/hl/c++/Makefile.in
@@ -658,13 +658,14 @@ check-install: installcheck
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -672,6 +673,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in
index 9ca6844..ecb35ad 100644
--- a/hl/c++/src/Makefile.in
+++ b/hl/c++/src/Makefile.in
@@ -677,13 +677,14 @@ check-install: installcheck
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -691,6 +692,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in
index 318cd10..e61a284 100644
--- a/hl/c++/test/Makefile.in
+++ b/hl/c++/test/Makefile.in
@@ -627,13 +627,14 @@ check-install: installcheck
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -641,6 +642,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
index 1ed7f2a..d39eb79 100644
--- a/hl/fortran/Makefile.in
+++ b/hl/fortran/Makefile.in
@@ -662,13 +662,14 @@ check-install: installcheck
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -676,6 +677,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
index 1fd0bda..5f23b40 100644
--- a/hl/fortran/src/Makefile.in
+++ b/hl/fortran/src/Makefile.in
@@ -711,13 +711,14 @@ H5TBff.lo:          $(srcdir)/H5TBff.f90
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -725,6 +726,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in
index e44d33b..2153462 100644
--- a/hl/fortran/test/Makefile.in
+++ b/hl/fortran/test/Makefile.in
@@ -630,13 +630,14 @@ check-install: installcheck
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -644,6 +645,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in
index f01dbd8..dd9f4d8 100644
--- a/hl/src/Makefile.in
+++ b/hl/src/Makefile.in
@@ -680,13 +680,14 @@ distclean-compile:
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -694,6 +695,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in
index 3b21ba2..7836aae 100644
--- a/hl/test/Makefile.in
+++ b/hl/test/Makefile.in
@@ -662,13 +662,14 @@ check-install: installcheck
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -676,6 +677,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.
diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in
index 1843e51..20190f3 100644
--- a/hl/tools/gif2h5/Makefile.in
+++ b/hl/tools/gif2h5/Makefile.in
@@ -661,13 +661,14 @@ check-install: installcheck
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
-# BUILT_SOURCES contain targets that need to be built before anything else
-# in the directory (e.g., Fortran type detection)
-build-lib: $(BUILT_SOURCES) $(LIB)
-build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
-build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
 
-lib progs tests check-s check-p check-clean ::
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
 	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
 	@for d in X $(SUBDIRS); do                                             \
 	    if test $$d != X && test $$d != .; then                           \
@@ -675,6 +676,15 @@ lib progs tests check-s check-p check-clean ::
 	    fi;                                                               \
 	done
 
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
 # Tell Automake to build tests when the user types `make all' (this is
 # not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
 # Automake won't build them automatically, either.