[svn-r26303] remove files with .clog2 extension generated by MPE when doing make clean.

14 files changed, 33 insertions, 33 deletions

diff --git a/hl/Makefile.in b/hl/Makefile.in
index 6ca0805..f3d6c04 100644
--- a/hl/Makefile.in
+++ b/hl/Makefile.in
@@ -665,8 +665,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
 @BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
 @BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
 @BUILD_HDF5_HL_CONDITIONAL_TRUE@SUBDIRS = src test tools $(CXX_DIR) $(FORTRAN_DIR)
diff --git a/hl/c++/Makefile.in b/hl/c++/Makefile.in
index f16130a..0367469 100644
--- a/hl/c++/Makefile.in
+++ b/hl/c++/Makefile.in
@@ -661,8 +661,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
 SUBDIRS = src test
 DIST_SUBDIRS = src test examples
 
diff --git a/hl/c++/examples/Makefile.in b/hl/c++/examples/Makefile.in
index 83f07f2..a9ecd9e 100644
--- a/hl/c++/examples/Makefile.in
+++ b/hl/c++/examples/Makefile.in
@@ -608,8 +608,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
 
 # These are the programs that 'make all' or 'make prog' will build and
 # which 'make check' will run.  List them in the order they should be run.
diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in
index 98110b9..7e8c4ba 100644
--- a/hl/c++/src/Makefile.in
+++ b/hl/c++/src/Makefile.in
@@ -667,8 +667,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
 
 # Add libtool shared library version numbers to the HDF5 library
 # See libtool versioning documentation online.
diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in
index 7e50ec4..1160548 100644
--- a/hl/c++/test/Makefile.in
+++ b/hl/c++/test/Makefile.in
@@ -664,8 +664,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
 
 # These are our main targets.  They should be listed in the order to be
 # executed, generally most specific tests to least specific tests.
diff --git a/hl/examples/Makefile.in b/hl/examples/Makefile.in
index 43c6e3c..92a8301 100644
--- a/hl/examples/Makefile.in
+++ b/hl/examples/Makefile.in
@@ -608,8 +608,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
 @BUILD_PARALLEL_CONDITIONAL_TRUE@EXAMPLE_PROG_PARA = 
 
 # Example directory
diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
index ff02a60..7c6f2e2 100644
--- a/hl/fortran/Makefile.in
+++ b/hl/fortran/Makefile.in
@@ -665,8 +665,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
 SUBDIRS = src test
 DIST_SUBDIRS = src test examples
 
diff --git a/hl/fortran/examples/Makefile.in b/hl/fortran/examples/Makefile.in
index 27b1dee..af5a18a 100644
--- a/hl/fortran/examples/Makefile.in
+++ b/hl/fortran/examples/Makefile.in
@@ -608,8 +608,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
 
 # Compile parallel fortran examples only if parallel is enabled
 @BUILD_PARALLEL_CONDITIONAL_TRUE@EXAMPLE_PROG_PARA = 
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
index 6979867..3ccfb9d 100644
--- a/hl/fortran/src/Makefile.in
+++ b/hl/fortran/src/Makefile.in
@@ -682,8 +682,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
 
 # Add libtool shared library version numbers to the HDF5 library
 # See libtool versioning documentation online.
diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in
index 50b8780..e1b28a5 100644
--- a/hl/fortran/test/Makefile.in
+++ b/hl/fortran/test/Makefile.in
@@ -673,11 +673,11 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
+# *.clog and *.clog2 are from the MPE option.
 
 # Temporary files.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog dsetf[1-5].h5 f1img.h5 \
-	f1tab.h5 tstds.h5
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 dsetf[1-5].h5 \
+	f1img.h5 f1tab.h5 tstds.h5
 
 # Our main target, the test programs
 TEST_PROG = tstds tstlite tstimage tsttable
diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in
index a848280..ee3ef49 100644
--- a/hl/src/Makefile.in
+++ b/hl/src/Makefile.in
@@ -663,8 +663,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
 
 # Add libtool shared library version numbers to the HDF5 library
 # See libtool versioning documentation online.
diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in
index e0ce927..75350ec 100644
--- a/hl/test/Makefile.in
+++ b/hl/test/Makefile.in
@@ -700,14 +700,14 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
+# *.clog and *.clog2 are from the MPE option.
 
 # Temporary files.  These files are the ones created by running `make test'.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog combine_tables[1-2].h5 \
-	test_ds[1-9].h5 test_ds10.h5 test_image[1-3].h5 \
-	file_img[1-2].h5 test_lite[1-4].h5 test_table.h5 \
-	test_packet_table.h5 test_packet_compress.h5 test_detach.h5 \
-	test_dectris.h5
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 \
+	combine_tables[1-2].h5 test_ds[1-9].h5 test_ds10.h5 \
+	test_image[1-3].h5 file_img[1-2].h5 test_lite[1-4].h5 \
+	test_table.h5 test_packet_table.h5 test_packet_compress.h5 \
+	test_detach.h5 test_dectris.h5
 
 # The tests depend on the hdf5, hdf5 test,  and hdf5_hl libraries
 LDADD = $(LIBH5_HL) $(LIBH5TEST) $(LIBHDF5)
diff --git a/hl/tools/Makefile.in b/hl/tools/Makefile.in
index bb7f71a..9d4359e 100644
--- a/hl/tools/Makefile.in
+++ b/hl/tools/Makefile.in
@@ -662,8 +662,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
 
 # All subdirectories
 SUBDIRS = gif2h5
diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in
index 2317975..b8fdd3a 100644
--- a/hl/tools/gif2h5/Makefile.in
+++ b/hl/tools/gif2h5/Makefile.in
@@ -676,8 +676,8 @@ TRACE = perl $(top_srcdir)/bin/trace
 
 # .chkexe files are used to mark tests that have run successfully.
 # .chklog files are output from those tests.
-# *.clog are from the MPE option.
-CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5 *.gif
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.gif
 
 # These are our main targets, the tools
 TEST_SCRIPT = h52giftest.sh