[svn-r11303] Purpose:

minor tidy up.

Description:
Changed both test programs and test scripts to use the same suffixes
(.chkexe and .chklog).  Changed from .log to .chklog to avoid running
into potential conflicts by other "things" (e.g., config.log).

Tested:
Heping.

10 files changed, 152 insertions, 249 deletions

diff --git a/hl/Makefile.in b/hl/Makefile.in
index 8628ce2..4a1b595 100755
--- a/hl/Makefile.in
+++ b/hl/Makefile.in
@@ -276,19 +276,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 @BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
 @BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
 @BUILD_HDF5_HL_CONDITIONAL_TRUE@SUBDIRS = src test $(CXX_DIR) $(FORTRAN_DIR)
@@ -307,8 +297,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-recursive
 
 .SUFFIXES:
@@ -696,7 +686,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -727,16 +717,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -753,8 +743,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -790,7 +780,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/hl/c++/Makefile.in b/hl/c++/Makefile.in
index 67646eb..322e146 100644
--- a/hl/c++/Makefile.in
+++ b/hl/c++/Makefile.in
@@ -281,19 +281,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 SUBDIRS = src test
 
 # Automake needs to be taught how to build lib, progs, and tests targets.
@@ -310,8 +300,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-recursive
 
 .SUFFIXES:
@@ -699,7 +689,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -730,16 +720,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -756,8 +746,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -793,7 +783,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in
index 8b89122..43d19d1 100644
--- a/hl/c++/src/Makefile.in
+++ b/hl/c++/src/Makefile.in
@@ -303,19 +303,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 
 # Include src directory
 INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src
@@ -349,8 +339,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -720,7 +710,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -751,16 +741,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -777,8 +767,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -814,7 +804,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in
index 6f08b9a..c95c1b0 100644
--- a/hl/c++/test/Makefile.in
+++ b/hl/c++/test/Makefile.in
@@ -297,19 +297,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 
 # Include directories
 INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src -I$(top_srcdir)/hl/c++/src -I$(top_srcdir)/test
@@ -339,8 +329,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -668,7 +658,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -699,16 +689,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -725,8 +715,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -762,7 +752,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in
index 4773657..d2eb6f7 100644
--- a/hl/fortran/Makefile.in
+++ b/hl/fortran/Makefile.in
@@ -276,19 +276,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 SUBDIRS = src test
 
 # Automake needs to be taught how to build lib, progs, and tests targets.
@@ -305,8 +295,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-recursive
 
 .SUFFIXES:
@@ -694,7 +684,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -725,16 +715,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -751,8 +741,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -788,7 +778,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in
index 7fb21b3..9017241 100644
--- a/hl/fortran/src/Makefile.in
+++ b/hl/fortran/src/Makefile.in
@@ -297,19 +297,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/hl/src -I$(top_builddir)/hl/src \
          -I$(top_srcdir)/fortran/src -I$(top_builddir)/fortran/src
 
@@ -343,8 +333,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -741,7 +731,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -772,16 +762,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -798,8 +788,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -835,7 +825,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in
index 15dbe8c..7a15e6e 100644
--- a/hl/fortran/test/Makefile.in
+++ b/hl/fortran/test/Makefile.in
@@ -296,20 +296,11 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
 
 # Temporary files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
-	$(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
-	$(TEST_PROG_CHKEXE:.chkexe_=.log) \
-	$(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) *.chksh *.logsh \
-	dsetf[1-4].h5 f1img.h5 f1tab.h5
+CHECK_CLEANFILES = *.chkexe *.chklog dsetf[1-4].h5 f1img.h5 f1tab.h5
 AM_CPPFLAGS = -I$(top_srcdir)/src -I$(top_builddir)/src -I$(top_srcdir)/hl/src
 AM_FCFLAGS = -I$(top_builddir)/fortran/src -I$(top_builddir)/hl/fortran/src $(F9XMODFLAG)$(top_builddir)/fortran/src $(F9XMODFLAG)$(top_builddir)/hl/fortran/src
 
@@ -339,8 +330,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -658,7 +649,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -689,16 +680,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -715,8 +706,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -752,7 +743,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in
index ea344a7..1534ab6 100644
--- a/hl/src/Makefile.in
+++ b/hl/src/Makefile.in
@@ -294,19 +294,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 
 # Add include directories to the C preprocessor flags
 AM_CPPFLAGS = -I$(top_srcdir)/src
@@ -332,8 +322,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -708,7 +698,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -739,16 +729,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -765,8 +755,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -802,7 +792,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in
index 7139119..e02c6fc 100644
--- a/hl/test/Makefile.in
+++ b/hl/test/Makefile.in
@@ -306,21 +306,13 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
 
 # Temporary files.  These files are the ones created by running `make test'.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
-	$(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
-	$(TEST_PROG_CHKEXE:.chkexe_=.log) \
-	$(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) *.chksh *.logsh \
-	combine_tables[1-2].h5 test_ds[1-6].h5 test_image[1-3].h5 \
-	test_lite[1-2].h5 test_table.h5 test_packet_table.h5
+CHECK_CLEANFILES = *.chkexe *.chklog combine_tables[1-2].h5 \
+	test_ds[1-6].h5 test_image[1-3].h5 test_lite[1-2].h5 \
+	test_table.h5 test_packet_table.h5
 
 # Add include directories to C preprocessor flags
 AM_CPPFLAGS = -I. -I$(srcdir) -I$(top_builddir)/src -I$(top_srcdir)/src -I$(top_srcdir)/hl/src
@@ -346,8 +338,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -691,7 +683,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -722,16 +714,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -748,8 +740,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -785,7 +777,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false
diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in
index 23d199a..24cdd44 100644
--- a/hl/tools/gif2h5/Makefile.in
+++ b/hl/tools/gif2h5/Makefile.in
@@ -304,19 +304,9 @@ H5CC_PP = $(bindir)/h5pcc
 H5FC = $(bindir)/h5fc
 H5FC_PP = $(bindir)/h5pfc
 
-# .chkexe and .chksh files are used to mark tests that have run successfully.
-# Serial tests create .log and .logsh files.  It's important only to clean log
-# files generated by HDF5's tests, because the .log suffix is used for
-# other files (e.g., config.log)!
-# On the other hand, it is very hard to specify the exact name of .chksh and
-# .logsh files because some scripts live in the source tree, not the build
-# tree.  Thus, we clean all .logsh and .chksh files.
-CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe)                    \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe)                        \
-        $(TEST_PROG_CHKEXE:.chkexe_=.log)                                \
-        $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log)                           \
-        *.chksh *.logsh
-
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+CHECK_CLEANFILES = *.chkexe *.chklog
 
 # Include src and tools/lib directories
 INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib
@@ -340,8 +330,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
 TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
 TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
 TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
-TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
-TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
 all: all-am
 
 .SUFFIXES:
@@ -702,7 +692,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
 $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
 	   tname=$(@:.chkexe_=)$(EXEEXT);\
-	   log=$(@:.chkexe_=.log); \
+	   log=$(@:.chkexe_=.chklog); \
 	   echo "============================"; \
 	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
 	      echo "No need to test $${tname} again."; \
@@ -733,16 +723,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
 	   echo "============================"; \
 	fi
 
-# The dummy.chksh here prevents the target from being
+# The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
 # $${tname} is the name of test.
-$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
-	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
-	   tname=`basename $(@:.chksh_=)`;\
-	   log=`basename $(@:.chksh_=.logsh)`; \
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   tname=`basename $(@:.chkexe_=)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
 	   echo "============================"; \
-	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
+	   if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \
 	      echo "No need to test $${tname} again."; \
 	   else \
 	      echo "============================" > $${log}; \
@@ -759,8 +749,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
 	      echo "============================" >> $${log}; \
 	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
 	      srcdir="$(srcdir)" \
-	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
-	         && touch `basename $(@:.chksh_=.chksh)` || \
+	         $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch `basename $(@:.chkexe_=.chkexe)` || \
 	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
 	         (cat $${log} && false) || exit 1; \
 	      echo "" >> $${log}; \
@@ -796,7 +786,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS)
 	test $$test = dummy || false
 	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
 	  if test $$test != dummy; then                                      \
-	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \
 	  fi;                                                                 \
 	done;                                                                 \
 	test $$test = dummy || false