[svn-r24997] Added compiler versions for mpich to settings file and configure summary.

For make installcheck, compile and run installed examples using the installed scripts.  They were being compiled but not run.
Add Fortran2003 examples to the run-ex-fortran script when fortran2003 is enabled.
Set flag to -O3 in production mode for Intel compilers other than those with specified other settings.
Gentoo patches:
    Remove unnecessary setting of LD_LIBRARY_PATH from configure.
    Prevent potential array subscript out of bounds error in perform/pio_engine.c and sio_engine.c.

Tested with h5committest on jam, koala, ostrich and platypus, on emu and kite, and parallel tests on jam, koala and platypus with mpich built with gnu 4.8.2 and with intel compilers.

6 files changed, 52 insertions, 25 deletions

diff --git a/hl/c++/examples/Makefile.am b/hl/c++/examples/Makefile.am
index df15257..c8f0305 100644
--- a/hl/c++/examples/Makefile.am
+++ b/hl/c++/examples/Makefile.am
@@ -24,6 +24,7 @@ include $(top_srcdir)/config/commence.am
 # These are the programs that 'make all' or 'make prog' will build and
 # which 'make check' will run.  List them in the order they should be run.
 EXAMPLE_PROG=ptExampleFL
+TEST_EXAMPLES_SCRIPT=$(INSTALL_SCRIPT_FILES)
 
 # These are the example files to be installed
 INSTALL_FILES=ptExampleFL.cpp
diff --git a/hl/c++/examples/Makefile.in b/hl/c++/examples/Makefile.in
index df7bc7a..fa624d1 100644
--- a/hl/c++/examples/Makefile.in
+++ b/hl/c++/examples/Makefile.in
@@ -616,6 +616,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
 # These are the programs that 'make all' or 'make prog' will build and
 # which 'make check' will run.  List them in the order they should be run.
 EXAMPLE_PROG = ptExampleFL
+TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
 
 # These are the example files to be installed
 INSTALL_FILES = ptExampleFL.cpp
@@ -1065,27 +1066,34 @@ install-examples: $(EXAMPLEDIR) $(INSTALL_FILES)
 uninstall-examples:
 	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then             \
 	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES);                \
-        fi
+	fi
 	@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then           \
 	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES);              \
-        fi
+	fi
 	@if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then    \
 	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES);       \
-        fi
+	fi
 	@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then    \
 	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES);       \
-        fi
+	fi
 
 installcheck-local:
 	@if test "$(STATIC_SHARED)" = "static, shared"; then               \
 	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
 	  $(MAKE) $(AM_MAKEFLAGS) clean;                                   \
 	  H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check;                      \
-	 elif test "$(STATIC_SHARED)" = "shared"; then                     \
+	elif test "$(STATIC_SHARED)" = "shared"; then                     \
 	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	 else                                                              \
+	else                                                              \
 	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	 fi
+	fi 
+	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
+	    echo "============================";                                         \
+	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
+	    echo "============================";                                         \
+	    (cd $(EXAMPLEDIR);                                                           \
+	     /bin/sh ./$(TEST_EXAMPLES_SCRIPT);)                                                   \
+	fi
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
diff --git a/hl/examples/Makefile.am b/hl/examples/Makefile.am
index 5108c5e..ba200ed 100644
--- a/hl/examples/Makefile.am
+++ b/hl/examples/Makefile.am
@@ -29,6 +29,8 @@ endif
 # Note: no '/' after DESTDIR.  Explanation in commence.am
 EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c
 EXAMPLETOPDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl
+INSTALL_SCRIPT_FILES = run-hlc-ex.sh
+INSTALL_TOP_SCRIPT_FILES = run-hl-ex.sh
 
 # Example programs.
 # Don't tell automake about them, because if it knew they were programs,
@@ -40,6 +42,7 @@ EXAMPLE_PROG = ex_lite1 ex_lite2 ex_lite3 ptExampleFL \
             ex_table_05 ex_table_06 ex_table_07 ex_table_08 \
             ex_table_09 ex_table_10 ex_table_11 ex_table_12 \
             ex_ds1
+TEST_EXAMPLES_SCRIPT=$(INSTALL_SCRIPT_FILES)
 
 # Install files
 # List all file that should be installed in examples directory
@@ -50,8 +53,6 @@ INSTALL_FILES = ex_lite1.c ex_lite2.c ex_lite3.c ptExampleFL.c \
                 ex_table_09.c ex_table_10.c ex_table_11.c ex_table_12.c      \
                 ex_ds1.c image24pixel.txt image8.txt pal_rgb.h
 
-INSTALL_SCRIPT_FILES = run-hlc-ex.sh
-INSTALL_TOP_SCRIPT_FILES = run-hl-ex.sh
 
 # Additional dependencies for each program are listed below.
 if BUILD_PARALLEL_CONDITIONAL
diff --git a/hl/examples/Makefile.in b/hl/examples/Makefile.in
index ea3ff07..3e24269 100644
--- a/hl/examples/Makefile.in
+++ b/hl/examples/Makefile.in
@@ -618,6 +618,8 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
 # Note: no '/' after DESTDIR.  Explanation in commence.am
 EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c
 EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl
+INSTALL_SCRIPT_FILES = run-hlc-ex.sh
+INSTALL_TOP_SCRIPT_FILES = run-hl-ex.sh
 
 # Example programs.
 # Don't tell automake about them, because if it knew they were programs,
@@ -630,6 +632,7 @@ EXAMPLE_PROG = ex_lite1 ex_lite2 ex_lite3 ptExampleFL \
             ex_table_09 ex_table_10 ex_table_11 ex_table_12 \
             ex_ds1
 
+TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
 
 # Install files
 # List all file that should be installed in examples directory
@@ -640,8 +643,6 @@ INSTALL_FILES = ex_lite1.c ex_lite2.c ex_lite3.c ptExampleFL.c \
                 ex_table_09.c ex_table_10.c ex_table_11.c ex_table_12.c      \
                 ex_ds1.c image24pixel.txt image8.txt pal_rgb.h
 
-INSTALL_SCRIPT_FILES = run-hlc-ex.sh
-INSTALL_TOP_SCRIPT_FILES = run-hl-ex.sh
 @BUILD_SHARED_SZIP_CONDITIONAL_TRUE@LD_LIBRARY_PATH = $(LL_PATH)
 
 # Assume that all tests in this directory are examples, and tell
@@ -1105,27 +1106,34 @@ install-examples: $(EXAMPLEDIR) $(INSTALL_FILES)
 uninstall-examples:
 	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then             \
 	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES);                \
-        fi
+	fi
 	@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then           \
 	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES);              \
-        fi
+	fi
 	@if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then    \
 	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES);       \
-        fi
+	fi
 	@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then    \
 	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES);       \
-        fi
+	fi
 
 installcheck-local:
 	@if test "$(STATIC_SHARED)" = "static, shared"; then               \
 	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
 	  $(MAKE) $(AM_MAKEFLAGS) clean;                                   \
 	  H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check;                      \
-	 elif test "$(STATIC_SHARED)" = "shared"; then                     \
+	elif test "$(STATIC_SHARED)" = "shared"; then                     \
 	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	 else                                                              \
+	else                                                              \
 	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	 fi
+	fi 
+	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
+	    echo "============================";                                         \
+	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
+	    echo "============================";                                         \
+	    (cd $(EXAMPLEDIR);                                                           \
+	     /bin/sh ./$(TEST_EXAMPLES_SCRIPT);)                                                   \
+	fi
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.
diff --git a/hl/fortran/examples/Makefile.am b/hl/fortran/examples/Makefile.am
index f94f031..91cb7c5 100644
--- a/hl/fortran/examples/Makefile.am
+++ b/hl/fortran/examples/Makefile.am
@@ -32,6 +32,7 @@ endif
 # We don't tell automake about these programs so that it doesn't try to
 # compile them with the regular fortran compiler.
 EXAMPLE_PROG=exlite ex_ds1
+TEST_EXAMPLES_SCRIPT=$(INSTALL_SCRIPT_FILES)
 
 # List files to be installed here
 INSTALL_FILES= exlite.f90 ex_ds1.f90
diff --git a/hl/fortran/examples/Makefile.in b/hl/fortran/examples/Makefile.in
index a66b5b9..e83f717 100644
--- a/hl/fortran/examples/Makefile.in
+++ b/hl/fortran/examples/Makefile.in
@@ -622,6 +622,7 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
 # We don't tell automake about these programs so that it doesn't try to
 # compile them with the regular fortran compiler.
 EXAMPLE_PROG = exlite ex_ds1
+TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES)
 
 # List files to be installed here
 INSTALL_FILES = exlite.f90 ex_ds1.f90
@@ -1068,27 +1069,34 @@ install-examples: $(EXAMPLEDIR) $(INSTALL_FILES)
 uninstall-examples:
 	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then             \
 	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES);                \
-        fi
+	fi
 	@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then           \
 	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES);              \
-        fi
+	fi
 	@if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then    \
 	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES);       \
-        fi
+	fi
 	@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then    \
 	  set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES);       \
-        fi
+	fi
 
 installcheck-local:
 	@if test "$(STATIC_SHARED)" = "static, shared"; then               \
 	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
 	  $(MAKE) $(AM_MAKEFLAGS) clean;                                   \
 	  H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check;                      \
-	 elif test "$(STATIC_SHARED)" = "shared"; then                     \
+	elif test "$(STATIC_SHARED)" = "shared"; then                     \
 	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
-	 else                                                              \
+	else                                                              \
 	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	 fi
+	fi 
+	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
+	    echo "============================";                                         \
+	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
+	    echo "============================";                                         \
+	    (cd $(EXAMPLEDIR);                                                           \
+	     /bin/sh ./$(TEST_EXAMPLES_SCRIPT);)                                                   \
+	fi
 
 # lib/progs/tests targets recurse into subdirectories. build-* targets
 # build files in this directory.