[svn-r17042] Updated perf_serial test to work on windows. Bring back from trunk.

Tested:
Windows

1 files changed, 966 insertions, 0 deletions

diff --git a/perform/Makefile b/perform/Makefile
new file mode 100644
index 0000000..bc0f5d3
--- /dev/null
+++ b/perform/Makefile
@@ -0,0 +1,966 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# perform/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Performance Makefile(.in)
+#
+
+
+pkgdatadir = $(datadir)/hdf5
+pkglibdir = $(libdir)/hdf5
+pkgincludedir = $(includedir)/hdf5
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-unknown-linux-gnu
+host_triplet = x86_64-unknown-linux-gnu
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am COPYING
+bin_PROGRAMS =  \
+	h5perf_serial$(EXEEXT)
+#bin_PROGRAMS = h5perf$(EXEEXT)
+check_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_4)
+TESTS = $(check_PROGRAMS)
+subdir = perform
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/H5config.h
+CONFIG_CLEAN_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+#am__EXEEXT_1 = h5perf$(EXEEXT) \
+#	perf$(EXEEXT)
+#am__EXEEXT_2 = benchpar$(EXEEXT) \
+#	mpi-perf$(EXEEXT)
+#am__EXEEXT_3 = $(am__EXEEXT_2)
+am__EXEEXT_4 = iopipe$(EXEEXT) chunk$(EXEEXT) overhead$(EXEEXT) \
+	zip_perf$(EXEEXT) perf_meta$(EXEEXT) h5perf_serial$(EXEEXT) \
+	$(am__EXEEXT_3)
+PROGRAMS = $(bin_PROGRAMS)
+benchpar_SOURCES = benchpar.c
+benchpar_OBJECTS = benchpar.$(OBJEXT)
+benchpar_LDADD = $(LDADD)
+benchpar_DEPENDENCIES = $(LIBHDF5)
+chunk_SOURCES = chunk.c
+chunk_OBJECTS = chunk.$(OBJEXT)
+chunk_LDADD = $(LDADD)
+chunk_DEPENDENCIES = $(LIBHDF5)
+am_h5perf_OBJECTS = pio_perf.$(OBJEXT) pio_engine.$(OBJEXT) \
+	pio_timer.$(OBJEXT)
+h5perf_OBJECTS = $(am_h5perf_OBJECTS)
+h5perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+am_h5perf_serial_OBJECTS = sio_perf.$(OBJEXT) sio_engine.$(OBJEXT) \
+	sio_timer.$(OBJEXT)
+h5perf_serial_OBJECTS = $(am_h5perf_serial_OBJECTS)
+h5perf_serial_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+iopipe_SOURCES = iopipe.c
+iopipe_OBJECTS = iopipe.$(OBJEXT)
+iopipe_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
+mpi_perf_SOURCES = mpi-perf.c
+mpi_perf_OBJECTS = mpi-perf.$(OBJEXT)
+mpi_perf_LDADD = $(LDADD)
+mpi_perf_DEPENDENCIES = $(LIBHDF5)
+overhead_SOURCES = overhead.c
+overhead_OBJECTS = overhead.$(OBJEXT)
+overhead_LDADD = $(LDADD)
+overhead_DEPENDENCIES = $(LIBHDF5)
+perf_SOURCES = perf.c
+perf_OBJECTS = perf.$(OBJEXT)
+perf_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
+perf_meta_SOURCES = perf_meta.c
+perf_meta_OBJECTS = perf_meta.$(OBJEXT)
+perf_meta_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
+zip_perf_SOURCES = zip_perf.c
+zip_perf_OBJECTS = zip_perf.$(OBJEXT)
+zip_perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+DEFAULT_INCLUDES = -I. -I$(top_builddir)/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \
+	$(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
+	perf_meta.c zip_perf.c
+DIST_SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \
+	$(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
+	perf_meta.c zip_perf.c
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
+ADD_PARALLEL_FILES = no
+AMTAR = ${SHELL} /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/missing --run tar
+AM_MAKEFLAGS = 
+AR = ar
+
+# Set the paths for AFS installs of autotools for Linux machines
+# Ideally, these tools should never be needed during the build.
+AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
+AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
+AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
+AWK = gawk
+BYTESEX = little-endian
+CC = gcc -fPIC
+CCDEPMODE = depmode=gcc3
+CC_VERSION = /usr/lib64/ccache/gcc -fPIC (gcc-4.3.2)
+
+# H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5,
+# but which shouldn't be exported to h5cc for building other programs.
+CFLAGS =  -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions
+CLEARFILEBUF = yes
+CODESTACK = no
+CONFIG_DATE = Tue Apr 21 10:41:53 CDT 2009
+CONFIG_MODE = production
+CONFIG_USER = abyrne@localhost.localdomain
+CPP = gcc -fPIC -E
+CPPFLAGS = -I/home/abyrne/HDF_Projects/SZIP/szip/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_POSIX_SOURCE -D_BSD_SOURCE    -DNDEBUG -UH5_DEBUG_API
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =   
+CYGPATH_W = echo
+DEBUG_PKG = 
+DEFAULT_API_VERSION = v18
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DEPRECATED_SYMBOLS = yes
+DIRECT_VFD = no
+DSYMUTIL = 
+DUMPBIN = 
+DYNAMIC_DIRS = -R/home/abyrne/HDF_Projects/SZIP/szip/lib 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+EXTERNAL_FILTERS = deflate(zlib),szip(encoder)
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = 
+F9XMODFLAG = 
+F9XSUFFIXFLAG = 
+FC = g95
+FCFLAGS =   
+FCFLAGS_f90 = 
+FCLIBS = 
+FGREP = /bin/grep -F
+FILTERS = shuffle,fletcher32,nbit,scaleoffset
+FSEARCH_DIRS = 
+GPFS = no
+GREP = /bin/grep
+H5_CFLAGS = -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions
+H5_CPPFLAGS =   -DNDEBUG -UH5_DEBUG_API
+H5_CXXFLAGS =  
+H5_FCFLAGS =  
+H5_LONE_COLON = yes
+H5_VERSION = 1.8.2-post13
+HADDR_T = 
+HAVE_DMALLOC = no
+HDF5_HL = yes
+HDF5_INTERFACES =  c++
+HDF_CXX = yes
+HDF_FORTRAN = no
+HID_T = 
+HL = hl
+HL_FOR = 
+HSIZE_T = 
+HSSIZE_T = 
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INSTRUMENT = no
+INSTRUMENT_LIBRARY = no
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -L/home/abyrne/HDF_Projects/SZIP/szip/lib
+LIBOBJS = 
+LIBS =  -lsz -lz -lm 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LINUX_LFS = yes
+LIPO = 
+LL_PATH = /home/abyrne/HDF_Projects/SZIP/szip/lib
+LN_S = ln -s
+LTLIBOBJS = 
+LT_STATIC_EXEC = 
+MAINT = #
+MAKEINFO = ${SHELL} /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/missing --run makeinfo
+MKDIR_P = /bin/mkdir -p
+MPE = no
+MPI_GET_SIZE = 
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJECT_NAMELEN_DEFAULT_F = 
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = hdf5
+PACKAGE_BUGREPORT = help@hdfgroup.org
+PACKAGE_NAME = HDF5
+PACKAGE_STRING = HDF5 1.8.2-post13
+PACKAGE_TARNAME = hdf5
+PACKAGE_VERSION = 1.8.2-post13
+PARALLEL = no
+PATH_SEPARATOR = :
+PERL = perl
+PTHREAD = 
+RANLIB = ranlib
+ROOT = /home/abyrne/HDF_Projects/HDF5-C-1.8
+RUNPARALLEL = 
+RUNSERIAL = 
+R_INTEGER = 
+R_LARGE = 
+SEARCH = VPATH=$(srcdir) $(top_builddir)/src $(top_srcdir)/src
+SED = /bin/sed
+SETX = set -x
+SET_MAKE = 
+SHELL = /bin/sh
+SIZE_T = 
+STATIC_EXEC = no
+STATIC_SHARED = 
+STRICT_FORMAT_CHECKS = no
+STRIP = strip
+TESTPARALLEL = 
+THREADSAFE = no
+TIME = time
+TR = /usr/bin/tr
+TRACE_API = no
+UNAME_INFO = Linux localhost.localdomain 2.6.27.21-170.2.56.fc10.x86_64 #1 SMP Mon Mar 23 23:08:10 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
+USE_FILTER_DEFLATE = yes
+USE_FILTER_FLETCHER32 = yes
+USE_FILTER_NBIT = yes
+USE_FILTER_SCALEOFFSET = yes
+USE_FILTER_SHUFFLE = yes
+USE_FILTER_SZIP = yes
+USINGMEMCHECKER = no
+VERSION = 1.8.2-post13
+WORDS_BIGENDIAN = no
+abs_builddir = /home/abyrne/HDF_Projects/HDF5-C-1.8/perform
+abs_srcdir = /home/abyrne/HDF_Projects/HDF5-C-1.8/perform
+abs_top_builddir = /home/abyrne/HDF_Projects/HDF5-C-1.8
+abs_top_srcdir = /home/abyrne/HDF_Projects/HDF5-C-1.8
+ac_ct_CC = gcc -fPIC
+ac_ct_CXX = 
+ac_ct_DUMPBIN = 
+ac_ct_FC = 
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-unknown-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = unknown
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = ${docdir}
+enable_shared = yes
+enable_static = yes
+exec_prefix = ${prefix}
+host = x86_64-unknown-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = unknown
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = $(SHELL) /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+lt_ECHO = echo
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_builddir = ..
+top_srcdir = ..
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = $(bindir)/h5cc
+H5CC_PP = $(bindir)/h5pcc
+H5FC = $(bindir)/h5fc
+H5FC_PP = $(bindir)/h5pfc
+H5CPP = $(bindir)/h5c++
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/tools/lib
+#TEST_PROG_PARA = h5perf perf
+
+# Some programs are not built or run by default, but can be built by hand or by
+# specifying --enable-build-all at configure time.
+# Also, some of these programs should only be built in parallel.
+#PARA_BUILD_ALL = benchpar mpi-perf
+#BUILD_ALL_PROGS = $(PARA_BUILD_ALL)
+
+# These are the programs that `make all' or `make tests' will build and which
+# `make check' will run. List them in the order they should be run.
+TEST_PROG = iopipe chunk overhead zip_perf perf_meta h5perf_serial $(BUILD_ALL_PROGS)
+h5perf_SOURCES = pio_perf.c pio_engine.c pio_timer.c
+h5perf_serial_SOURCES = sio_perf.c sio_engine.c sio_timer.c
+
+# These are the files that `make clean' (and derivatives) will remove from
+# this directory.
+CLEANFILES = *.h5 *.raw *.dat x-gnuplot perftest.out
+
+# All of the programs depend on the main hdf5 library, and some of them
+# depend on test or tools library.
+LDADD = $(LIBHDF5)
+h5perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+h5perf_serial_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+perf_LDADD = $(LIBH5TEST) $(LIBHDF5)
+iopipe_LDADD = $(LIBH5TEST) $(LIBHDF5)
+zip_perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+perf_meta_LDADD = $(LIBH5TEST) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  perform/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  perform/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: # $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	     || test -f $$p1 \
+	  ; then \
+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
+	done
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+benchpar$(EXEEXT): $(benchpar_OBJECTS) $(benchpar_DEPENDENCIES) 
+	@rm -f benchpar$(EXEEXT)
+	$(LINK) $(benchpar_OBJECTS) $(benchpar_LDADD) $(LIBS)
+chunk$(EXEEXT): $(chunk_OBJECTS) $(chunk_DEPENDENCIES) 
+	@rm -f chunk$(EXEEXT)
+	$(LINK) $(chunk_OBJECTS) $(chunk_LDADD) $(LIBS)
+h5perf$(EXEEXT): $(h5perf_OBJECTS) $(h5perf_DEPENDENCIES) 
+	@rm -f h5perf$(EXEEXT)
+	$(LINK) $(h5perf_OBJECTS) $(h5perf_LDADD) $(LIBS)
+h5perf_serial$(EXEEXT): $(h5perf_serial_OBJECTS) $(h5perf_serial_DEPENDENCIES) 
+	@rm -f h5perf_serial$(EXEEXT)
+	$(LINK) $(h5perf_serial_OBJECTS) $(h5perf_serial_LDADD) $(LIBS)
+iopipe$(EXEEXT): $(iopipe_OBJECTS) $(iopipe_DEPENDENCIES) 
+	@rm -f iopipe$(EXEEXT)
+	$(LINK) $(iopipe_OBJECTS) $(iopipe_LDADD) $(LIBS)
+mpi-perf$(EXEEXT): $(mpi_perf_OBJECTS) $(mpi_perf_DEPENDENCIES) 
+	@rm -f mpi-perf$(EXEEXT)
+	$(LINK) $(mpi_perf_OBJECTS) $(mpi_perf_LDADD) $(LIBS)
+overhead$(EXEEXT): $(overhead_OBJECTS) $(overhead_DEPENDENCIES) 
+	@rm -f overhead$(EXEEXT)
+	$(LINK) $(overhead_OBJECTS) $(overhead_LDADD) $(LIBS)
+perf$(EXEEXT): $(perf_OBJECTS) $(perf_DEPENDENCIES) 
+	@rm -f perf$(EXEEXT)
+	$(LINK) $(perf_OBJECTS) $(perf_LDADD) $(LIBS)
+perf_meta$(EXEEXT): $(perf_meta_OBJECTS) $(perf_meta_DEPENDENCIES) 
+	@rm -f perf_meta$(EXEEXT)
+	$(LINK) $(perf_meta_OBJECTS) $(perf_meta_LDADD) $(LIBS)
+zip_perf$(EXEEXT): $(zip_perf_OBJECTS) $(zip_perf_DEPENDENCIES) 
+	@rm -f zip_perf$(EXEEXT)
+	$(LINK) $(zip_perf_OBJECTS) $(zip_perf_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/benchpar.Po
+include ./$(DEPDIR)/chunk.Po
+include ./$(DEPDIR)/iopipe.Po
+include ./$(DEPDIR)/mpi-perf.Po
+include ./$(DEPDIR)/overhead.Po
+include ./$(DEPDIR)/perf.Po
+include ./$(DEPDIR)/perf_meta.Po
+include ./$(DEPDIR)/pio_engine.Po
+include ./$(DEPDIR)/pio_perf.Po
+include ./$(DEPDIR)/pio_timer.Po
+include ./$(DEPDIR)/sio_engine.Po
+include ./$(DEPDIR)/sio_perf.Po
+include ./$(DEPDIR)/sio_timer.Po
+include ./$(DEPDIR)/zip_perf.Po
+
+.c.o:
+	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \
+	clean clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool ctags distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-binPROGRAMS
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNTESTS="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: