summaryrefslogtreecommitdiffstats
path: root/perform/sio_engine.c
diff options
context:
space:
mode:
authorScot Breitenfeld <brtnfld@hdfgroup.org>2008-04-30 19:51:13 (GMT)
committerScot Breitenfeld <brtnfld@hdfgroup.org>2008-04-30 19:51:13 (GMT)
commitaec106e324ce20e5efb725c25a6a333c7970127b (patch)
tree234df369115a46b08037c5f385061cf58823e497 /perform/sio_engine.c
parent5773fd34bc5adf59b4530d95ac9f0c0585902803 (diff)
downloadhdf5-aec106e324ce20e5efb725c25a6a333c7970127b.zip
hdf5-aec106e324ce20e5efb725c25a6a333c7970127b.tar.gz
hdf5-aec106e324ce20e5efb725c25a6a333c7970127b.tar.bz2
[svn-r14903] Undoing change committed in r14902.
Diffstat (limited to 'perform/sio_engine.c')
-rw-r--r--perform/sio_engine.c1746
1 files changed, 1746 insertions, 0 deletions
diff --git a/perform/sio_engine.c b/perform/sio_engine.c
new file mode 100644
index 0000000..92d6f1c
--- /dev/null
+++ b/perform/sio_engine.c
@@ -0,0 +1,1746 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by the Board of Trustees of the University of Illinois. *
+ * All rights reserved. *
+ * *
+ * This file is part of HDF5. The full HDF5 copyright notice, including *
+ * terms governing use, modification, and redistribution, is contained in *
+ * the files COPYING and Copyright.html. COPYING can be found at the root *
+ * of the source code distribution tree; Copyright.html can be found at the *
+ * root level of an installed copy of the electronic HDF5 document set and *
+ * is linked from the top-level documents page. It can also be found at *
+ * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have *
+ * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Author: Christian Chilan, April 2008
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <errno.h>
+
+#include "hdf5.h"
+
+#ifdef H5_HAVE_GPFS
+# include <gpfs_fcntl.h>
+#endif /* H5_HAVE_GPFS */
+
+#include "sio_perf.h"
+#include "sio_timer.h"
+
+/* Macro definitions */
+
+/* sizes of various items. these sizes won't change during program execution */
+/* The following three must have the same type */
+#define ELMT_SIZE (sizeof(unsigned char)) /* we're doing bytes */
+#define ELMT_H5_TYPE H5T_NATIVE_UCHAR
+
+#define GOTOERROR(errcode) { ret_code = errcode; goto done; }
+#define GOTODONE { goto done; }
+#define ERRMSG(mesg) { \
+ fprintf(stderr, "*** Assertion failed (%s) at line %4d in %s\n", \
+ mesg, (int)__LINE__, __FILE__); \
+}
+
+#define MSG(mesg) { \
+ fprintf(stderr, "(%s) at line %4d in %s\n", \
+ mesg, (int)__LINE__, __FILE__); \
+}
+
+/* verify: if val is false (0), print mesg. */
+#define VRFY(val, mesg) do { \
+ if (!val) { \
+ ERRMSG(mesg); \
+ GOTOERROR(FAIL); \
+ } \
+} while(0)
+
+/* POSIX I/O macros */
+#define POSIXCREATE(fn) HDopen(fn, O_CREAT|O_TRUNC|O_RDWR, 0600)
+#define POSIXOPEN(fn, F) HDopen(fn, F, 0600)
+#define POSIXCLOSE(F) HDclose(F)
+#define POSIXSEEK(F,L) HDlseek(F, L, SEEK_SET)
+#define POSIXWRITE(F,B,S) HDwrite(F,B,S)
+#define POSIXREAD(F,B,S) HDread(F,B,S)
+
+enum {
+ SIO_CREATE = 1,
+ SIO_WRITE = 2,
+ SIO_READ = 4
+};
+
+/* Global variables */
+static int clean_file_g = -1; /*whether to cleanup temporary test */
+/*files. -1 is not defined; */
+/*0 is no cleanup; 1 is do cleanup */
+
+/*
+ * In a parallel machine, the filesystem suitable for compiling is
+ * unlikely a parallel file system that is suitable for parallel I/O.
+ * There is no standard pathname for the parallel file system. /tmp
+ * is about the best guess.
+ */
+#ifndef HDF5_PARAPREFIX
+# ifdef __PUMAGON__
+/* For the PFS of TFLOPS */
+# define HDF5_PARAPREFIX "pfs:/pfs_grande/multi/tmp_1"
+# else
+# define HDF5_PARAPREFIX ""
+# endif /* __PUMAGON__ */
+#endif /* !HDF5_PARAPREFIX */
+
+#ifndef MIN
+# define MIN(a,b) ((a) < (b) ? (a) : (b))
+#endif /* !MIN */
+
+/* the different types of file descriptors we can expect */
+typedef union _file_descr {
+ int posixfd; /* POSIX file handle*/
+ hid_t h5fd; /* HDF5 file */
+} file_descr;
+
+/* local functions */
+static char *sio_create_filename(iotype iot, const char *base_name,
+ char *fullname, size_t size, parameters *param);
+static herr_t do_write(results *res, file_descr *fd, parameters *parms, void *buffer);
+static herr_t do_read(results *res, file_descr *fd, parameters *parms, void *buffer);
+static herr_t dset_write(int local_dim, file_descr *fd, parameters *parms, void *buffer);
+static herr_t posix_buffer_write(int local_dim, file_descr *fd, parameters *parms, void *buffer);
+static herr_t dset_read(int localrank, file_descr *fd, parameters *parms, void *buffer);
+static herr_t posix_buffer_read(int local_dim, file_descr *fd, parameters *parms, void *buffer);
+static herr_t do_fopen(parameters *param, char *fname, file_descr *fd /*out*/,
+ int flags);
+hid_t set_vfd(parameters *param);
+static herr_t do_fclose(iotype iot, file_descr *fd);
+static void do_cleanupfile(iotype iot, char *fname);
+
+/* GPFS-specific functions */
+#ifdef H5_HAVE_GPFS
+static void gpfs_access_range(int handle, off_t start, off_t length, int is_write);
+static void gpfs_free_range(int handle, off_t start, off_t length);
+static void gpfs_clear_file_cache(int handle);
+static void gpfs_cancel_hints(int handle);
+static void gpfs_start_data_shipping(int handle, int num_insts);
+static void gpfs_start_data_ship_map(int handle, int partition_size,
+ int agent_count, int *agent_node_num);
+static void gpfs_stop_data_shipping(int handle);
+static void gpfs_invalidate_file_cache(const char *filename);
+#endif /* H5_HAVE_GPFS */
+
+/* global variables */
+static off_t offset[MAX_DIMS]; /* dataset size in bytes */
+static size_t buf_offset[MAX_DIMS]; /* dataset size in bytes */
+static int order[MAX_DIMS]; /* dimension access order */
+static size_t linear_buf_size; /* linear buffer size */
+static int cont_dim; /* lowest dimension for contiguous POSIX
+ access */
+static size_t cont_size; /* size of contiguous POSIX access */
+static hid_t fapl; /* file access list */
+static unsigned char *buf_p; /* buffer pointer */
+static unsigned char *buf2_p; /* buffer pointer */
+static const char *multi_letters = "msbrglo"; /* string for multi driver */
+static char *buffer2=NULL; /* buffer for data verification */
+
+/* HDF5 global variables */
+static hsize_t h5count[MAX_DIMS]; /*selection count */
+static hssize_t h5offset[MAX_DIMS]; /* Selection offset within dataspace */
+static hid_t h5dset_space_id = -1; /*dataset space ID */
+static hid_t h5mem_space_id = -1; /*memory dataspace ID */
+static hid_t h5ds_id = -1; /*dataset handle */
+static hid_t h5dcpl = -1; /* Dataset creation property list */
+static hid_t h5dxpl = -1; /* Dataset transfer property list */
+
+/*
+ * Function: do_sio
+ * Purpose: SIO Engine where IO are executed.
+ * Return: results
+ * Programmer: Christian Chilan, April, 2008
+ * Modifications:
+ */
+ results
+do_sio(parameters param)
+{
+ char *buffer = NULL; /*data buffer pointer */
+ off_t nbytes; /* dataset raw size */
+ off_t dset_size[MAX_DIMS]; /* dataset size in bytes */
+ size_t buf_size[MAX_DIMS]; /* general buffer size in bytes */
+ size_t chk_size[MAX_DIMS]; /* chunk size in bytes */
+ file_descr fd; /* file handles */
+ iotype iot; /* API type */
+ char base_name[256]; /* test file base name */
+ /* return codes */
+ herr_t ret_code = 0; /*return code */
+ results res;
+
+ char fname[FILENAME_MAX]; /* test file name */
+ int i;
+ /* HDF5 variables */
+ herr_t hrc; /*HDF5 return code */
+
+ /* Sanity check parameters */
+
+ /* IO type */
+ iot = param.io_type;
+
+ switch (iot) {
+ case POSIXIO:
+ fd.posixfd = -1;
+ res.timers = sio_time_new();
+ break;
+ case HDF5:
+ fd.h5fd = -1;
+ res.timers = sio_time_new();
+ break;
+ default:
+ /* unknown request */
+ fprintf(stderr, "Unknown IO type request (%d)\n", iot);
+ GOTOERROR(FAIL);
+ }
+
+ nbytes = param.num_bytes;
+ linear_buf_size = 1;
+
+ for (i=0; i<param.rank; i++){
+ dset_size[i] = param.dset_size[i];
+ buf_size[i] = param.buf_size[i];
+ chk_size[i] = param.chk_size[i];
+ order[i] = param.order[i];
+ linear_buf_size *= buf_size[i];
+ buf_offset[i] = 0;
+ offset[i] = 0;
+
+ /* Validate transfer buffer size */
+ if (param.buf_size[i]<=0) {
+ HDfprintf(stderr,
+ "Transfer buffer size[%d] (%Hd) must be > 0\n", i,(long_long)buf_size[i]);
+ GOTOERROR(FAIL);
+ }
+
+ if ((param.dset_size[i]%param.buf_size[i])!=0) {
+ HDfprintf(stderr,
+ "Dataset size[%d] (%Hd) must be a multiple of the "
+ "trasfer buffer size[%d] (%Hd)\n",param.rank,
+ (long_long)param.dset_size[i], param.rank, (long_long)param.buf_size[i]);
+ GOTOERROR(FAIL);
+ }
+
+ }
+
+ /* Allocate transfer buffer */
+ buffer2 = malloc(linear_buf_size);
+ if ((buffer = malloc(linear_buf_size)) == NULL){
+ HDfprintf(stderr, "malloc for transfer buffer size (%Hd) failed\n",
+ (long_long)(linear_buf_size));
+ GOTOERROR(FAIL);
+ }
+
+ if (sio_debug_level >= 4)
+
+ /* output all of the times for all iterations */
+ fprintf(output, "Timer details:\n");
+
+ /*
+ * Write performance measurement
+ */
+ /* Open file for write */
+
+ strcpy(base_name, "#sio_tmp");
+ sio_create_filename(iot, base_name, fname, sizeof(fname), &param);
+
+ if (sio_debug_level > 0)
+ HDfprintf(output, "data filename=%s\n",
+ fname);
+
+ set_time(res.timers, HDF5_GROSS_WRITE_FIXED_DIMS, START);
+ hrc = do_fopen(&param, fname, &fd, SIO_CREATE | SIO_WRITE);
+ VRFY((hrc == SUCCESS), "do_fopen failed");
+
+ set_time(res.timers, HDF5_FINE_WRITE_FIXED_DIMS, START);
+ hrc = do_write(&res, &fd, &param, buffer);
+ set_time(res.timers, HDF5_FINE_WRITE_FIXED_DIMS, STOP);
+ VRFY((hrc == SUCCESS), "do_write failed");
+
+ /* Close file for write */
+ hrc = do_fclose(iot, &fd);
+ set_time(res.timers, HDF5_GROSS_WRITE_FIXED_DIMS, STOP);
+ VRFY((hrc == SUCCESS), "do_fclose failed");
+
+ if (!param.h5_write_only) {
+ /*
+ * Read performance measurement
+ */
+
+ /* Open file for read */
+ set_time(res.timers, HDF5_GROSS_READ_FIXED_DIMS, START);
+ hrc = do_fopen(&param, fname, &fd, SIO_READ);
+ VRFY((hrc == SUCCESS), "do_fopen failed");
+
+ set_time(res.timers, HDF5_FINE_READ_FIXED_DIMS, START);
+ hrc = do_read(&res, &fd, &param, buffer);
+ set_time(res.timers, HDF5_FINE_READ_FIXED_DIMS, STOP);
+ VRFY((hrc == SUCCESS), "do_read failed");
+
+ /* Close file for read */
+ hrc = do_fclose(iot, &fd);
+
+ set_time(res.timers, HDF5_GROSS_READ_FIXED_DIMS, STOP);
+ VRFY((hrc == SUCCESS), "do_fclose failed");
+ }
+
+ do_cleanupfile(iot, fname);
+
+done:
+ /* clean up */
+ /* release HDF5 objects */
+
+ /* close any opened files */
+ /* no remove(fname) because that should have happened normally. */
+ switch (iot) {
+ case POSIXIO:
+ if (fd.posixfd != -1)
+ hrc = do_fclose(iot, &fd);
+ break;
+ case HDF5:
+ if (fd.h5fd != -1)
+ hrc = do_fclose(iot, &fd);
+ break;
+ }
+
+ /* release generic resources */
+ if (buffer)
+ free(buffer);
+
+ res.ret_code = ret_code;
+ return res;
+}
+
+/*
+ * Function: sio_create_filename
+ * Purpose: Create a new filename to write to. Determine the correct
+ * suffix to append to the filename by the type of I/O we're
+ * doing. Also, place in the /tmp/{$USER,$LOGIN} directory if
+ * USER or LOGIN are specified in the environment.
+ * Return: Pointer to filename or NULL
+ * Programmer: Bill Wendling, 21. November 2001
+ * Modifications: Support for file drivers. Christian Chilan, April, 2008
+ */
+ static char *
+sio_create_filename(iotype iot, const char *base_name, char *fullname, size_t size, parameters *param)
+{
+ const char *prefix, *suffix="";
+ char *ptr, last = '\0';
+ size_t i, j;
+ vfdtype vfd;
+ vfd = param->vfd;
+
+ if (!base_name || !fullname || size < 1)
+ return NULL;
+
+ memset(fullname, 0, size);
+
+ switch (iot) {
+ case POSIXIO:
+ suffix = ".posix";
+ break;
+ case HDF5:
+ suffix = ".h5";
+ if (vfd == family)
+ suffix = "%05d.h5";
+ else if (vfd == multi)
+ suffix = NULL;
+ break;
+ }
+
+ /* First use the environment variable and then try the constant */
+ prefix = getenv("HDF5_PARAPREFIX");
+
+#ifdef HDF5_PARAPREFIX
+ if (!prefix)
+ prefix = HDF5_PARAPREFIX;
+#endif /* HDF5_PARAPREFIX */
+
+ /* Prepend the prefix value to the base name */
+ if (prefix && *prefix) {
+ /* If the prefix specifies the HDF5_PARAPREFIX directory, then
+ * default to using the "/tmp/$USER" or "/tmp/$LOGIN"
+ * directory instead. */
+ register char *user, *login, *subdir;
+
+ user = getenv("USER");
+ login = getenv("LOGIN");
+ subdir = (user ? user : login);
+
+ if (subdir) {
+ for (i = 0; i < size && prefix[i]; i++)
+ fullname[i] = prefix[i];
+
+ fullname[i++] = '/';
+
+ for (j = 0; i < size && subdir[j]; i++, j++)
+ fullname[i] = subdir[j];
+ } else {
+ /* We didn't append the prefix yet */
+ strncpy(fullname, prefix, MIN(strlen(prefix), size));
+ }
+
+ if ((strlen(fullname) + strlen(base_name) + 1) < size) {
+ /* Append the base_name with a slash first. Multiple slashes are
+ * handled below. */
+ h5_stat_t buf;
+
+ if (HDstat(fullname, &buf) < 0)
+ /* The directory doesn't exist just yet */
+ if (mkdir(fullname, (mode_t)0755) < 0 && errno != EEXIST) {
+ /* We couldn't make the "/tmp/${USER,LOGIN}" subdirectory.
+ * Default to PREFIX's original prefix value. */
+ strcpy(fullname, prefix);
+ }
+
+ strcat(fullname, "/");
+ strcat(fullname, base_name);
+ } else {
+ /* Buffer is too small */
+ return NULL;
+ }
+ } else if (strlen(base_name) >= size) {
+ /* Buffer is too small */
+ return NULL;
+ } else {
+ strcpy(fullname, base_name);
+ }
+
+ /* Append a suffix */
+ if (suffix) {
+ if (strlen(fullname) + strlen(suffix) >= size)
+ return NULL;
+
+ strcat(fullname, suffix);
+ }
+
+ /* Remove any double slashes in the filename */
+ for (ptr = fullname, i = j = 0; ptr && i < size; i++, ptr++) {
+ if (*ptr != '/' || last != '/')
+ fullname[j++] = *ptr;
+
+ last = *ptr;
+ }
+
+ return fullname;
+}
+
+/*
+ * Function: do_write
+ * Purpose: Write the required amount of data to the file.
+ * Return: SUCCESS or FAIL
+ * Programmer: Christian Chilan, April, 2008
+ * Modifications:
+ */
+static herr_t
+do_write(results *res, file_descr *fd, parameters *parms, void *buffer)
+{
+ int ret_code = SUCCESS;
+ char dname[64];
+ long i;
+ /* HDF5 variables */
+ herr_t hrc; /*HDF5 return code */
+ hsize_t h5dims[MAX_DIMS]; /*dataset dim sizes */
+ hsize_t h5chunk[MAX_DIMS]; /*dataset dim sizes */
+ hsize_t h5block[MAX_DIMS]; /*dataspace selection */
+ hsize_t h5stride[MAX_DIMS]; /*selection stride */
+ hsize_t h5start[MAX_DIMS]; /*selection start */
+ hsize_t h5maxdims[MAX_DIMS];
+ int rank; /*rank of dataset */
+ /* Prepare buffer for verifying data */
+/* if (parms->verify)
+ memset(buffer,1,linear_buf_size); */
+
+ buf_p=(unsigned char *)buffer;
+
+ for (i=0; i < linear_buf_size; i++)
+ buf_p[i]=i%128;
+
+ rank = parms->rank;
+
+ for (i=0; i<rank; i++) {
+ h5offset[i] = offset[i] = 0;
+ }
+
+ /* I/O Access specific setup */
+ switch (parms->io_type) {
+ case POSIXIO:
+
+ /* determine lowest dimension for contiguous POSIX access */
+ cont_dim = rank;
+
+ for (i=rank-1; i>=0; i--) {
+ if (parms->buf_size[i]==parms->dset_size[i])
+ cont_dim = i;
+ else
+ break;
+ }
+
+ /* determine size of the contiguous POSIX access */
+ cont_size = (!cont_dim)? 1 : parms->buf_size[cont_dim-1];
+ for (i=cont_dim; i<rank; i++)
+ cont_size *= parms->buf_size[i];
+
+ break;
+
+ case HDF5: /* HDF5 setup */
+
+ for (i=0; i < rank; i++){
+ h5dims[i] = parms->dset_size[i];
+ h5start[i] = 0;
+ h5stride[i] = 1;
+ h5block[i] = 1;
+ h5count[i] = parms->buf_size[i];
+ h5chunk[i] = parms->chk_size[i];
+ h5maxdims[i] = H5S_UNLIMITED;
+
+ }
+
+ if (parms->h5_use_chunks && parms->h5_extendable) {
+ h5dset_space_id = H5Screate_simple(rank, h5count, h5maxdims);
+ VRFY((h5dset_space_id >= 0), "H5Screate_simple");
+ }
+ else {
+ h5dset_space_id = H5Screate_simple(rank, h5dims, NULL);
+ VRFY((h5dset_space_id >= 0), "H5Screate_simple");
+ }
+
+ hrc = H5Sselect_hyperslab(h5dset_space_id, H5S_SELECT_SET,
+ h5start, h5stride, h5count, h5block);
+ VRFY((hrc >= 0), "H5Sselect_hyperslab");
+
+ /* Create the memory dataspace that corresponds to the xfer buffer */
+ h5mem_space_id = H5Screate_simple(rank, h5count, NULL);
+ VRFY((h5mem_space_id >= 0), "H5Screate_simple");
+
+ /* Create the dataset transfer property list */
+ h5dxpl = H5Pcreate(H5P_DATASET_XFER);
+ if (h5dxpl < 0) {
+ fprintf(stderr, "HDF5 Property List Create failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ break;
+ } /* end switch */
+
+
+ /* create dataset */
+ switch (parms->io_type) {
+ case POSIXIO:
+ break;
+
+ case HDF5:
+ h5dcpl = H5Pcreate(H5P_DATASET_CREATE);
+
+ if (h5dcpl < 0) {
+ fprintf(stderr, "HDF5 Property List Create failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ if(parms->h5_use_chunks) {
+ /* Set the chunk size to be the same as the buffer size */
+ hrc = H5Pset_chunk(h5dcpl, rank, h5chunk);
+ if (hrc < 0) {
+ fprintf(stderr, "HDF5 Property List Set failed\n");
+ GOTOERROR(FAIL);
+ } /* end if */
+ } /* end if */
+
+ sprintf(dname, "Dataset_%ld", (unsigned long)parms->num_bytes);
+ h5ds_id = H5Dcreate2(fd->h5fd, dname, ELMT_H5_TYPE,
+ h5dset_space_id, H5P_DEFAULT, h5dcpl, H5P_DEFAULT);
+
+ if (h5ds_id < 0) {
+ fprintf(stderr, "HDF5 Dataset Create failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ hrc = H5Pclose(h5dcpl);
+ /* verifying the close of the dcpl */
+ if (hrc < 0) {
+ fprintf(stderr, "HDF5 Property List Close failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ break;
+ }
+
+ /* Start "raw data" write timer */
+ set_time(res->timers, HDF5_RAW_WRITE_FIXED_DIMS, START);
+
+ /* Perform write */
+ hrc = dset_write(rank-1, fd, parms, buffer);
+
+ if (hrc < 0) {
+ fprintf(stderr, "Error in dataset write\n");
+ GOTOERROR(FAIL);
+ }
+
+
+ /* Stop "raw data" write timer */
+ set_time(res->timers, HDF5_RAW_WRITE_FIXED_DIMS, STOP);
+
+ /* Calculate write time */
+
+ /* Close dataset. Only HDF5 needs to do an explicit close. */
+ if (parms->io_type == HDF5) {
+ hrc = H5Dclose(h5ds_id);
+
+ if (hrc < 0) {
+ fprintf(stderr, "HDF5 Dataset Close failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ h5ds_id = -1;
+ } /* end if */
+
+done:
+
+ /* release HDF5 objects */
+ if (h5dset_space_id != -1) {
+ hrc = H5Sclose(h5dset_space_id);
+ if (hrc < 0){
+ fprintf(stderr, "HDF5 Dataset Space Close failed\n");
+ ret_code = FAIL;
+ } else {
+ h5dset_space_id = -1;
+ }
+ }
+
+ if (h5mem_space_id != -1) {
+ hrc = H5Sclose(h5mem_space_id);
+ if (hrc < 0) {
+ fprintf(stderr, "HDF5 Memory Space Close failed\n");
+ ret_code = FAIL;
+ } else {
+ h5mem_space_id = -1;
+ }
+ }
+
+ if (h5dxpl != -1) {
+ hrc = H5Pclose(h5dxpl);
+ if (hrc < 0) {
+ fprintf(stderr, "HDF5 Dataset Transfer Property List Close failed\n");
+ ret_code = FAIL;
+ } else {
+ h5dxpl = -1;
+ }
+ }
+
+ return ret_code;
+}
+
+/*
+ * Function: dset_write
+ * Purpose: Write buffer into the dataset.
+ * Return: SUCCESS or FAIL
+ * Programmer: Christian Chilan, April, 2008
+ * Modifications:
+ */
+
+static herr_t dset_write(int local_dim, file_descr *fd, parameters *parms, void *buffer)
+{
+ int cur_dim = order[local_dim]-1;
+ int ret_code = SUCCESS;
+ int k;
+ hsize_t dims[MAX_DIMS], maxdims[MAX_DIMS];
+ long i,j;
+ herr_t hrc;
+
+ /* iterates according to the dimensions in order array */
+ for (i=0; i < parms->dset_size[cur_dim]; i += parms->buf_size[cur_dim]){
+
+ h5offset[cur_dim] = offset[cur_dim] = i;
+
+ if (local_dim > 0){
+
+ dset_write(local_dim-1, fd, parms, buffer);
+
+ }else{
+
+ switch (parms->io_type) {
+
+ case POSIXIO:
+ /* initialize POSIX offset in the buffer */
+ for (j=0; j < parms->rank; j++) {
+ buf_offset[j]=0;
+ }
+ buf_p = (unsigned char *)buffer;
+ /* write POSIX buffer */
+ posix_buffer_write(0, fd, parms, buffer);
+ break;
+
+ case HDF5:
+ /* if dimensions are extendable, extend them as needed during
+ access */
+ if (parms->h5_use_chunks && parms->h5_extendable) {
+
+ hrc=H5Sget_simple_extent_dims(h5dset_space_id,dims,maxdims);
+ VRFY((hrc >= 0), "H5Sget_simple_extent_dims");
+
+ for (k=0; k < parms->rank; k++){
+
+ if (dims[k] <= h5offset[k]) {
+ dims[k] = dims[k]+h5count[k];
+ hrc=H5Sset_extent_simple(h5dset_space_id,parms->rank,dims,maxdims);
+ VRFY((hrc >= 0), "H5Sset_extent_simple");
+ hrc=H5Dset_extent(h5ds_id,dims);
+ VRFY((hrc >= 0), "H5Dextend");
+ }
+ }
+ }
+ /* applies offset */
+ hrc = H5Soffset_simple(h5dset_space_id, h5offset);
+ VRFY((hrc >= 0), "H5Soffset_simple");
+
+ /* Write the buffer out */
+ hrc=H5Sget_simple_extent_dims(h5dset_space_id,dims,maxdims);
+ hrc = H5Dwrite(h5ds_id, ELMT_H5_TYPE, h5mem_space_id,
+ h5dset_space_id, h5dxpl, buffer);
+ VRFY((hrc >= 0), "H5Dwrite");
+
+ break;
+ } /* switch (parms->io_type) */
+ }
+ }
+done:
+ return ret_code;
+}
+
+/*
+ * Function: posix_buffer_write
+ * Purpose: Write buffer into the POSIX file considering contiguity.
+ * Return: SUCCESS or FAIL
+ * Programmer: Christian Chilan, April, 2008
+ * Modifications:
+ */
+
+static herr_t posix_buffer_write(int local_dim, file_descr *fd, parameters *parms, void *buffer)
+{
+ int dtype_size = 1;
+ int ret_code = SUCCESS;
+ long i;
+ size_t d_offset;
+ size_t linear_dset_offset = 0;
+ int j, rc;
+
+ /* if dimension is not contiguous, call recursively */
+ if (local_dim < parms->rank-1 && local_dim != cont_dim) {
+
+ for (i=0; i < parms->buf_size[local_dim]; i += dtype_size) {
+ buf_offset[local_dim] = i;
+ posix_buffer_write(local_dim+1, fd, parms, buffer);
+
+ /* if next dimension is cont_dim, it will fill out the buffer
+ traversing the entire dimension local_dim without the need
+ of performing iteration */
+ if (local_dim+1==cont_dim)
+ break;
+ }
+ /* otherwise, perform contiguous POSIX access */
+ } else {
+
+ buf_offset[local_dim] = 0;
+
+ /* determine offset in the buffer */
+ for (i=0; i < parms->rank; i++){
+ d_offset=1;
+
+ for (j=i+1; j < parms->rank; j++)
+ d_offset *= parms->dset_size[j];
+
+ linear_dset_offset += (offset[i]+buf_offset[i])*d_offset;
+ }
+
+ /* only care if seek returns error */
+ rc = POSIXSEEK(fd->posixfd, linear_dset_offset) < 0 ? -1 : 0;
+ VRFY((rc==0), "POSIXSEEK");
+ /* check if all bytes are written */
+ rc = ((ssize_t)cont_size ==
+ POSIXWRITE(fd->posixfd, buf_p, cont_size));
+ VRFY((rc != 0), "POSIXWRITE");
+
+ /* Advance location in buffer */
+ buf_p += cont_size;
+
+ }
+done:
+ return ret_code;
+}
+
+/*
+ * Function: do_read
+ * Purpose: Read the required amount of data to the file.
+ * Return: SUCCESS or FAIL
+ * Programmer: Christian Chilan, April, 2008
+ * Modifications:
+ */
+static herr_t
+do_read(results *res, file_descr *fd, parameters *parms, void *buffer)
+{
+ int ret_code = SUCCESS;
+ char dname[64];
+ long i;
+ /* HDF5 variables */
+ herr_t hrc; /*HDF5 return code */
+ hsize_t h5dims[MAX_DIMS]; /*dataset dim sizes */
+ hsize_t h5chunk[MAX_DIMS]; /*dataset dim sizes */
+ hsize_t h5block[MAX_DIMS]; /*dataspace selection */
+ hsize_t h5stride[MAX_DIMS]; /*selection stride */
+ hsize_t h5start[MAX_DIMS]; /*selection start */
+ int rank;
+
+ /* Prepare buffer for verifying data */
+ for (i=0; i < linear_buf_size; i++)
+ buffer2[i]=i%128;
+
+ rank = parms->rank;
+ for (i=0; i<rank; i++) {
+ h5offset[i] = offset[i] = 0;
+ }
+
+ /* I/O Access specific setup */
+ switch (parms->io_type) {
+ case POSIXIO:
+ cont_dim = rank;
+
+ for (i=rank-1; i>=0; i--) {
+ if (parms->buf_size[i]==parms->dset_size[i])
+ cont_dim = i;
+ else
+ break;
+ }
+ cont_size = (!cont_dim)? 1 : parms->buf_size[cont_dim-1];
+ for (i=cont_dim; i<rank; i++)
+ cont_size *= parms->buf_size[i];
+
+ break;
+
+ case HDF5: /* HDF5 setup */
+ for (i=0; i < rank; i++){
+ h5dims[i] = parms->dset_size[i];
+ h5start[i] = 0;
+ h5stride[i] = 1;
+ h5block[i] = 1;
+ h5count[i] = parms->buf_size[i];
+ h5chunk[i] = parms->chk_size[i];
+ }
+
+ h5dset_space_id = H5Screate_simple(rank, h5dims, NULL);
+ VRFY((h5dset_space_id >= 0), "H5Screate_simple");
+
+ hrc = H5Sselect_hyperslab(h5dset_space_id, H5S_SELECT_SET,
+ h5start, h5stride, h5count, h5block);
+ VRFY((hrc >= 0), "H5Sselect_hyperslab");
+
+ /* Create the memory dataspace that corresponds to the xfer buffer */
+ h5mem_space_id = H5Screate_simple(rank, h5count, NULL);
+ VRFY((h5mem_space_id >= 0), "H5Screate_simple");
+
+ /* Create the dataset transfer property list */
+ h5dxpl = H5Pcreate(H5P_DATASET_XFER);
+ if (h5dxpl < 0) {
+ fprintf(stderr, "HDF5 Property List Create failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ break;
+ } /* end switch */
+
+
+ /* create dataset */
+ switch (parms->io_type) {
+ case POSIXIO:
+ break;
+
+ case HDF5:
+ sprintf(dname, "Dataset_%ld", parms->num_bytes);
+ h5ds_id = H5Dopen2(fd->h5fd, dname, H5P_DEFAULT);
+ if (h5ds_id < 0) {
+ fprintf(stderr, "HDF5 Dataset open failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ break;
+
+ } /* end switch */
+
+ /* Start "raw data" read timer */
+ set_time(res->timers, HDF5_RAW_READ_FIXED_DIMS, START);
+ hrc = dset_read(rank-1, fd, parms, buffer);
+
+ if (hrc < 0) {
+ fprintf(stderr, "Error in dataset read\n");
+ GOTOERROR(FAIL);
+ }
+
+ /* Stop "raw data" read timer */
+ set_time(res->timers, HDF5_RAW_READ_FIXED_DIMS, STOP);
+
+ /* Calculate read time */
+
+ /* Close dataset. Only HDF5 needs to do an explicit close. */
+ if (parms->io_type == HDF5) {
+ hrc = H5Dclose(h5ds_id);
+
+ if (hrc < 0) {
+ fprintf(stderr, "HDF5 Dataset Close failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ h5ds_id = -1;
+ } /* end if */
+
+done:
+
+ /* release HDF5 objects */
+ if (h5dset_space_id != -1) {
+ hrc = H5Sclose(h5dset_space_id);
+ if (hrc < 0){
+ fprintf(stderr, "HDF5 Dataset Space Close failed\n");
+ ret_code = FAIL;
+ } else {
+ h5dset_space_id = -1;
+ }
+ }
+
+ if (h5mem_space_id != -1) {
+ hrc = H5Sclose(h5mem_space_id);
+ if (hrc < 0) {
+ fprintf(stderr, "HDF5 Memory Space Close failed\n");
+ ret_code = FAIL;
+ } else {
+ h5mem_space_id = -1;
+ }
+ }
+
+ if (h5dxpl != -1) {
+ hrc = H5Pclose(h5dxpl);
+ if (hrc < 0) {
+ fprintf(stderr, "HDF5 Dataset Transfer Property List Close failed\n");
+ ret_code = FAIL;
+ } else {
+ h5dxpl = -1;
+ }
+ }
+
+ return ret_code;
+}
+
+/*
+ * Function: dset_read
+ * Purpose: Read buffer into the dataset.
+ * Return: SUCCESS or FAIL
+ * Programmer: Christian Chilan, April, 2008
+ * Modifications:
+ */
+
+static herr_t dset_read(int local_dim, file_descr *fd, parameters *parms, void *buffer)
+{
+ int cur_dim = order[local_dim]-1;
+ int ret_code = SUCCESS;
+ long i,j;
+ herr_t hrc;
+
+ /* iterate on the current dimension */
+ for (i=0; i < parms->dset_size[cur_dim]; i += parms->buf_size[cur_dim]){
+
+ h5offset[cur_dim] = offset[cur_dim] = i;
+
+ /* if traverse in order array is incomplete, recurse */
+ if (local_dim > 0){
+
+ ret_code = dset_read(local_dim-1, fd, parms, buffer);
+
+ /* otherwise, write buffer into dataset */
+ }else{
+
+ switch (parms->io_type) {
+
+ case POSIXIO:
+ for (j=0; j<parms->rank; j++) {
+ buf_offset[j] = 0;
+ }
+ buf_p = (unsigned char*)buffer;
+ buf2_p = (unsigned char*)buffer2;
+ posix_buffer_read(0, fd, parms, buffer);
+ break;
+
+ case HDF5:
+ hrc = H5Soffset_simple(h5dset_space_id, h5offset);
+ VRFY((hrc >= 0), "H5Soffset_simple");
+ /* Read the buffer out */
+ hrc = H5Dread(h5ds_id, ELMT_H5_TYPE, h5mem_space_id,
+ h5dset_space_id, h5dxpl, buffer);
+ VRFY((hrc >= 0), "H5Dread");
+#if 0
+ for (j=0; j<linear_buf_size; j++) {
+ buf_p = (unsigned char*)buffer;
+ if (buf_p[j]!=buffer2[j])
+ printf("Inconsistent data in %d\n", j);
+ }
+#endif
+ break;
+ } /* switch (parms->io_type) */
+ }
+ }
+done:
+ return ret_code;
+}
+
+/*
+ * Function: posix_buffer_read
+ * Purpose: Read buffer into the POSIX file considering contiguity.
+ * Return: SUCCESS or FAIL
+ * Programmer: Christian Chilan, April, 2008
+ * Modifications:
+ */
+
+static herr_t posix_buffer_read(int local_dim, file_descr *fd, parameters *parms, void *buffer)
+{
+ int dtype_size = 1;
+ int ret_code = SUCCESS;
+ long i;
+ size_t d_offset;
+ size_t linear_dset_offset = 0;
+ int j, rc;
+
+ /* if local dimension is not contiguous, recurse */
+ if (local_dim < parms->rank-1 && local_dim != cont_dim) {
+
+ for (i=0; i < parms->buf_size[local_dim]; i += dtype_size) {
+ buf_offset[local_dim] = i;
+ ret_code = posix_buffer_read(local_dim+1, fd, parms, buffer);
+ if (local_dim+1==cont_dim)
+ break;
+ }
+ /* otherwise, perform contiguous POSIX access */
+ } else {
+
+ buf_offset[local_dim] = 0;
+ /* determine offset in buffer */
+ for (i=0; i<parms->rank; i++){
+ d_offset=1;
+
+ for (j=i+1; j<parms->rank; j++)
+ d_offset *= parms->dset_size[j];
+
+ linear_dset_offset += (offset[i]+buf_offset[i])*d_offset;
+ }
+
+ /* only care if seek returns error */
+ rc = POSIXSEEK(fd->posixfd, linear_dset_offset) < 0 ? -1 : 0;
+ VRFY((rc==0), "POSIXSEEK");
+ /* check if all bytes are read */
+ rc = ((ssize_t)cont_size ==
+ POSIXREAD(fd->posixfd, buf_p, cont_size));
+ VRFY((rc != 0), "POSIXREAD");
+#if 0
+ for (j=0; j<cont_size; j++) {
+ if (buf_p[j]!=buf2_p[j])
+ printf("Inconsistent data in %d\n", j);
+ }
+ buf2_p += cont_size;
+#endif
+
+ /* Advance location in buffer */
+ buf_p += cont_size;
+
+ }
+done:
+ return ret_code;
+}
+
+
+/*
+ * Function: do_fopen
+ * Purpose: Open the specified file.
+ * Return: SUCCESS or FAIL
+ * Programmer: Albert Cheng, Bill Wendling, 2001/12/13
+ * Modifications: Support for file drivers, Christian Chilan, April, 2008
+ */
+ static herr_t
+do_fopen(parameters *param, char *fname, file_descr *fd /*out*/, int flags)
+{
+ int ret_code = SUCCESS;
+
+ switch (param->io_type) {
+ case POSIXIO:
+ if (flags & (SIO_CREATE | SIO_WRITE))
+ fd->posixfd = POSIXCREATE(fname);
+ else
+ fd->posixfd = POSIXOPEN(fname, O_RDONLY);
+
+ if (fd->posixfd < 0 ) {
+ fprintf(stderr, "POSIX File Open failed(%s)\n", fname);
+ GOTOERROR(FAIL);
+ }
+
+ break;
+
+ case HDF5:
+
+ fapl = set_vfd(param);
+
+ if (fapl < 0) {
+ fprintf(stderr, "HDF5 Property List Create failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ /* create the parallel file */
+ if (flags & (SIO_CREATE | SIO_WRITE)) {
+ fd->h5fd = H5Fcreate(fname, H5F_ACC_TRUNC, H5P_DEFAULT, fapl);
+ } else {
+ fd->h5fd = H5Fopen(fname, H5F_ACC_RDONLY, fapl);
+ }
+
+
+ if (fd->h5fd < 0) {
+ fprintf(stderr, "HDF5 File Create failed(%s)\n", fname);
+ GOTOERROR(FAIL);
+ }
+ break;
+ }
+
+done:
+ return ret_code;
+}
+
+/*
+ * Function: set_vfd
+ * Purpose: Sets file driver.
+ * Return: SUCCESS or FAIL
+ * Programmer: Christian Chilan, April, 2008
+ * Modifications:
+ */
+
+hid_t
+set_vfd(parameters *param)
+{
+ hid_t fapl = -1;
+ vfdtype vfd;
+
+ vfd = param->vfd;
+
+ if ((fapl=H5Pcreate(H5P_FILE_ACCESS))<0) return -1;
+
+ if (vfd == sec2) {
+ /* Unix read() and write() system calls */
+ if (H5Pset_fapl_sec2(fapl)<0) return -1;
+ } else if (vfd == stdio) {
+ /* Standard C fread() and fwrite() system calls */
+ if (H5Pset_fapl_stdio(fapl)<0) return -1;
+ } else if (vfd == core) {
+ /* In-core temporary file with 1MB increment */
+ if (H5Pset_fapl_core(fapl, (size_t)1024*1024, TRUE)<0) return -1;
+ } else if (vfd == split) {
+ /* Split meta data and raw data each using default driver */
+ if (H5Pset_fapl_split(fapl,
+ "-m.h5", H5P_DEFAULT,
+ "-r.h5", H5P_DEFAULT)<0)
+ return -1;
+ } else if (vfd == multi) {
+ /* Multi-file driver, general case of the split driver */
+ H5FD_mem_t memb_map[H5FD_MEM_NTYPES];
+ hid_t memb_fapl[H5FD_MEM_NTYPES];
+ const char *memb_name[H5FD_MEM_NTYPES];
+ char sv[H5FD_MEM_NTYPES][1024];
+ haddr_t memb_addr[H5FD_MEM_NTYPES];
+ H5FD_mem_t mt;
+
+ HDmemset(memb_map, 0, sizeof memb_map);
+ HDmemset(memb_fapl, 0, sizeof memb_fapl);
+ HDmemset(memb_name, 0, sizeof memb_name);
+ HDmemset(memb_addr, 0, sizeof memb_addr);
+
+ assert(HDstrlen(multi_letters)==H5FD_MEM_NTYPES);
+ for (mt=H5FD_MEM_DEFAULT; mt<H5FD_MEM_NTYPES; H5_INC_ENUM(H5FD_mem_t,mt)) {
+ memb_fapl[mt] = H5P_DEFAULT;
+ sprintf(sv[mt], "%%s-%c.h5", multi_letters[mt]);
+ memb_name[mt] = sv[mt];
+ memb_addr[mt] = MAX(mt-1,0)*(HADDR_MAX/10);
+ }
+
+ if (H5Pset_fapl_multi(fapl, memb_map, memb_fapl, memb_name,
+ memb_addr, FALSE)<0) {
+ return -1;
+ }
+ } else if (vfd == family) {
+ hsize_t fam_size = 1*1024*1024; /*100 MB*/
+
+ /* Family of files, each 1MB and using the default driver */
+ /* if ((val=HDstrtok(NULL, " \t\n\r")))
+ fam_size = (hsize_t)(HDstrtod(val, NULL) * 1024*1024); */
+ if (H5Pset_fapl_family(fapl, fam_size, H5P_DEFAULT)<0)
+ return -1;
+ } else if (vfd == direct) {
+#ifdef H5_HAVE_DIRECT
+ /* Linux direct read() and write() system calls. Set memory boundary, file block size,
+ * and copy buffer size to the default values. */
+ if (H5Pset_fapl_direct(fapl, 1024, 4096, 8*4096)<0) return -1;
+#endif
+ } else {
+ /* Unknown driver */
+ return -1;
+ }
+
+ return fapl;
+}
+
+/*
+ * Function: do_fclose
+ * Purpose: Close the specified file descriptor.
+ * Return: SUCCESS or FAIL
+ * Programmer: Albert Cheng, Bill Wendling, 2001/12/13
+ * Modifications:
+ */
+ static herr_t
+do_fclose(iotype iot, file_descr *fd /*out*/)
+{
+ herr_t ret_code = SUCCESS, hrc;
+ int rc = 0;
+
+ switch (iot) {
+ case POSIXIO:
+ rc = POSIXCLOSE(fd->posixfd);
+
+ if (rc != 0){
+ fprintf(stderr, "POSIX File Close failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ fd->posixfd = -1;
+ break;
+
+ case HDF5:
+ hrc = H5Fclose(fd->h5fd);
+
+ if (hrc < 0) {
+ fprintf(stderr, "HDF5 File Close failed\n");
+ GOTOERROR(FAIL);
+ }
+
+ fd->h5fd = -1;
+ break;
+ }
+
+done:
+ return ret_code;
+}
+
+
+/*
+ * Function: do_cleanupfile
+ * Purpose: Cleanup temporary file unless HDF5_NOCLEANUP is set.
+ * Return: void
+ * Programmer: Albert Cheng 2001/12/12
+ * Modifications: Support for file drivers. Christian Chilan, April, 2008
+ */
+ static void
+do_cleanupfile(iotype iot, char *filename)
+{
+ char temp[2048];
+ int j;
+ hid_t driver;
+
+ if (clean_file_g == -1)
+ clean_file_g = (getenv("HDF5_NOCLEANUP")==NULL) ? 1 : 0;
+
+ if (clean_file_g){
+
+ switch (iot) {
+ case POSIXIO:
+ HDremove(filename);
+ break;
+
+ case HDF5:
+ driver = H5Pget_driver(fapl);
+
+ if (driver == H5FD_FAMILY) {
+ for (j = 0; /*void*/; j++) {
+ HDsnprintf(temp, sizeof temp, filename, j);
+
+ if (HDaccess(temp, F_OK) < 0)
+ break;
+
+ HDremove(temp);
+ }
+ } else if (driver == H5FD_CORE) {
+ hbool_t backing; /* Whether the core file has backing store */
+
+ H5Pget_fapl_core(fapl,NULL,&backing);
+
+ /* If the file was stored to disk with bacing store, remove it */
+ if(backing)
+ HDremove(filename);
+
+ } else if (driver == H5FD_MULTI) {
+ H5FD_mem_t mt;
+ assert(HDstrlen(multi_letters)==H5FD_MEM_NTYPES);
+
+ for (mt = H5FD_MEM_DEFAULT; mt < H5FD_MEM_NTYPES; H5_INC_ENUM(H5FD_mem_t,mt)) {
+ HDsnprintf(temp, sizeof temp, "%s-%c.h5",
+ filename, multi_letters[mt]);
+ HDremove(temp); /*don't care if it fails*/
+ }
+ } else {
+ HDremove(filename);
+ }
+ H5Pclose(fapl);
+ break;
+ }
+}
+}
+
+#ifdef H5_HAVE_GPFS
+
+/* Descriptions here come from the IBM GPFS Manual */
+
+/*
+ * Function: gpfs_access_range
+ * Purpose: Declares an access range within a file for an
+ * application.
+ *
+ * The application will access file offsets within the given
+ * range, and will not access offsets outside the range.
+ * Violating this hint may produce worse performance than if
+ * no hint was specified.
+ *
+ * This hint is useful in situations where a file is
+ * partitioned coarsely among several nodes. If the ranges
+ * do not overlap, each node can specify which range of the
+ * file it will access, with a performance improvement in
+ * some cases, such as for sequential writing within a
+ * range.
+ *
+ * Subsequent GPFS_ACCESS_RANGE hints will replace a hint
+ * passed earlier.
+ *
+ * START - The start of the access range offset, in
+ * bytes, from the beginning of the file
+ * LENGTH - Length of the access range. 0 indicates to
+ * the end of the file
+ * IS_WRITE - 0 indicates READ access, 1 indicates WRITE access
+ * Return: Nothing
+ * Programmer: Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+ static void
+gpfs_access_range(int handle, off_t start, off_t length, int is_write)
+{
+ struct {
+ gpfsFcntlHeader_t hdr;
+ gpfsAccessRange_t access;
+ } access_range;
+
+ access_range.hdr.totalLength = sizeof(access_range);
+ access_range.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+ access_range.hdr.fcntlReserved = 0;
+ access_range.access.structLen = sizeof(gpfsAccessRange_t);
+ access_range.access.structType = GPFS_ACCESS_RANGE;
+ access_range.access.start = start;
+ access_range.access.length = length;
+ access_range.access.isWrite = is_write;
+
+ if (gpfs_fcntl(handle, &access_range) != 0) {
+ fprintf(stderr,
+ "gpfs_fcntl DS start directive failed. errno=%d errorOffset=%d\n",
+ errno, access_range.hdr.errorOffset);
+ exit(EXIT_FAILURE);
+ }
+}
+
+/*
+ * Function: gpfs_free_range
+ * Purpose: Undeclares an access range within a file for an
+ * application.
+ *
+ * The application will no longer access file offsets within
+ * the given range. GPFS flushes the data at the file
+ * offsets and removes it from the cache.
+ *
+ * Multi-node applications that have finished one phase of
+ * their computation may wish to use this hint before the
+ * file is accessed in a conflicting mode from another node
+ * in a later phase. The potential performance benefit is
+ * that GPFS can avoid later synchronous cache consistency
+ * operations.
+ *
+ * START - The start of the access range offset, in
+ * bytes from the beginning of the file.
+ * LENGTH - Length of the access range. 0 indicates to
+ * the end of the file.
+ * Return: Nothing
+ * Programmer: Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+ static void
+gpfs_free_range(int handle, off_t start, off_t length)
+{
+ struct {
+ gpfsFcntlHeader_t hdr;
+ gpfsFreeRange_t range;
+ } free_range;
+
+ /* Issue the invalidate hint */
+ free_range.hdr.totalLength = sizeof(free_range);
+ free_range.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+ free_range.hdr.fcntlReserved = 0;
+ free_range.range.structLen = sizeof(gpfsFreeRange_t);
+ free_range.range.structType = GPFS_FREE_RANGE;
+ free_range.range.start = start;
+ free_range.range.length = length;
+
+ if (gpfs_fcntl(handle, &free_range) != 0) {
+ fprintf(stderr,
+ "gpfs_fcntl free range failed for range %d:%d. errno=%d errorOffset=%d\n",
+ start, length, errno, free_range.hdr.errorOffset);
+ exit(EXIT_FAILURE);
+ }
+}
+
+/*
+ * Function: gpfs_clear_file_cache
+ * Purpose: Indicates file access in the near future is not expected.
+ *
+ * The application does not expect to make any further
+ * accesses to the file in the near future, so GPFS removes
+ * any data or metadata pertaining to the file from its
+ * cache.
+ *
+ * Multi-node applications that have finished one phase of
+ * their computation may wish to use this hint before the
+ * file is accessed in a conflicting mode from another node
+ * in a later phase. The potential performance benefit is
+ * that GPFS can avoid later synchronous cache consistency
+ * operations.
+ * Return: Nothing
+ * Programmer: Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+ static void
+gpfs_clear_file_cache(int handle)
+{
+ struct {
+ gpfsFcntlHeader_t hdr;
+ gpfsClearFileCache_t clear;
+ } clear_cache;
+
+ clear_cache.hdr.totalLength = sizeof(clear_cache);
+ clear_cache.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+ clear_cache.hdr.fcntlReserved = 0;
+ clear_cache.clear.structLen = sizeof(gpfsClearFileCache_t);
+ clear_cache.clear.structType = GPFS_CLEAR_FILE_CACHE;
+
+ if (gpfs_fcntl(handle, &clear_cache) != 0) {
+ fprintf(stderr,
+ "gpfs_fcntl clear file cache directive failed. errno=%d errorOffset=%d\n",
+ errno, clear_cache.hdr.errorOffset);
+ exit(EXIT_FAILURE);
+ }
+}
+
+/*
+ * Function: gpfs_cancel_hints
+ * Purpose: Indicates to remove any hints against the open file
+ * handle.
+ *
+ * GPFS removes any hints that may have been issued against
+ * this open file handle:
+ *
+ * - The hint status of the file is restored ot what it
+ * would have been immediately after being opened, but
+ * does not affect the contents of the GPFS file
+ * cache. Cancelling an earlier hint that resulted in
+ * data being removed from the GPFS file cache does
+ * not bring that data back int othe cache; data
+ * re-enters the cache only pon access by the
+ * application or by user-driven or automatic
+ * prefetching.
+ * - Only the GPFS_MULTIPLE_ACCESS_RANGE hint has a
+ * state that might be removed by the
+ * GPFS_CANCEL_HINTS directive.
+ * Return: Nothing
+ * Programmer: Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+ static void
+gpfs_cancel_hints(int handle)
+{
+ struct {
+ gpfsFcntlHeader_t hdr;
+ gpfsCancelHints_t cancel;
+ } cancel_hints;
+
+ cancel_hints.hdr.totalLength = sizeof(cancel_hints);
+ cancel_hints.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+ cancel_hints.hdr.fcntlReserved = 0;
+ cancel_hints.cancel.structLen = sizeof(gpfsCancelHints_t);
+ cancel_hints.cancel.structType = GPFS_CANCEL_HINTS;
+
+ if (gpfs_fcntl(handle, &cancel_hints) != 0) {
+ fprintf(stderr,
+ "gpfs_fcntl cancel hints directive failed. errno=%d errorOffset=%d\n",
+ errno, cancel_hints.hdr.errorOffset);
+ exit(EXIT_FAILURE);
+ }
+}
+
+/*
+ * Function: gpfs_start_data_shipping
+ * Purpose: Initiates data shipping mode.
+ *
+ * Once all participating threads have issued this directive
+ * for a file, GPFS enters a mode where it logically
+ * partitions the blocks of the file among a group of agent
+ * nodes. The agents are those nodes on which one or more
+ * threads have issued the GPFS_DATA_SHIP_START directive.
+ * Each thread that has issued a GPFS_DATA_SHIP_START
+ * directive and the associated agent nodes are referred to
+ * as the data shipping collective.
+ *
+ * The second parameter is the total number of open
+ * instances on all nodes that will be operating on the
+ * file. Must be called for every such instance with the
+ * same value of NUM_INSTS.
+ *
+ * NUM_INSTS - The number of open file instances, on all
+ * nodes, collaborating to operate on the file
+ * Return: Nothing
+ * Programmer: Bill Wendling, 28. May 2002
+ * Modifications:
+ */
+ static void
+gpfs_start_data_shipping(int handle, int num_insts)
+{
+ struct {
+ gpfsFcntlHeader_t hdr;
+ gpfsDataShipStart_t start;
+ } ds_start;
+
+ ds_start.hdr.totalLength = sizeof(ds_start);
+ ds_start.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+ ds_start.hdr.fcntlReserved = 0;
+ ds_start.start.structLen = sizeof(gpfsDataShipStart_t);
+ ds_start.start.structType = GPFS_DATA_SHIP_START;
+ ds_start.start.numInstances = num_insts;
+ ds_start.start.reserved = 0;
+
+ if (gpfs_fcntl(handle, &ds_start) != 0) {
+ fprintf(stderr,
+ "gpfs_fcntl DS start directive failed. errno=%d errorOffset=%d\n",
+ errno, ds_start.hdr.errorOffset);
+ exit(EXIT_FAILURE);
+ }
+}
+
+/*
+ * Function: gpfs_start_data_ship_map
+ * Purpose: Indicates which agent nodes are to be used for data
+ * shipping. GPFS recognizes which agent nodes to use for
+ * data shipping.
+ *
+ * PARTITION_SIZE - The number of contiguous bytes per
+ * server. This value must be a
+ * multiple of the number of bytes in a
+ * single file system block
+ * AGENT_COUNT - The number of entries in the
+ * agentNodeNumber array
+ * AGENT_NODE_NUM - The data ship agent node numbers as
+ * listed in the SDT or the global ODM
+ *
+ * Return: Nothing
+ * Programmer: Bill Wendling, 10. Jul 2002
+ * Modifications:
+ */
+ static void
+gpfs_start_data_ship_map(int handle, int partition_size, int agent_count,
+ int *agent_node_num)
+{
+ int i;
+ struct {
+ gpfsFcntlHeader_t hdr;
+ gpfsDataShipMap_t map;
+ } ds_map;
+
+ ds_map.hdr.totalLength = sizeof(ds_map);
+ ds_map.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+ ds_map.hdr.fcntlReserved = 0;
+ ds_map.map.structLen = sizeof(gpfsDataShipMap_t);
+ ds_map.map.structType = GPFS_DATA_SHIP_MAP;
+ ds_map.map.partitionSize = partition_size;
+ ds_map.map.agentCount = agent_count;
+
+ for (i = 0; i < agent_count; ++i)
+ ds_map.map.agentNodeNumber[i] = agent_node_num[i];
+
+ if (gpfs_fcntl(handle, &ds_map) != 0) {
+ fprintf(stderr,
+ "gpfs_fcntl DS map directive failed. errno=%d errorOffset=%d\n",
+ errno, ds_map.hdr.errorOffset);
+ exit(EXIT_FAILURE);
+ }
+}
+
+/*
+ * Function: gpfs_stop_data_shipping
+ * Purpose: Takes a file out of the data shipping mode.
+ *
+ * - GPFS waits for all threads that issued the
+ * GPFS_DATA_SHIP_START directive to issue this directive,
+ * then flushes the dirty file data to disk.
+ *
+ * - While a gpfs_cntl() call is blocked for other threads,
+ * the call can be interrupted by any signal. If a signal
+ * is delivered to any of the waiting calls, all waiting
+ * calls on every node will be interrupted and will return
+ * EINTR. GPFS will not cancel data shipping mode if such
+ * a signal occurs. It is the responsibility of the
+ * application to mask off any signals that might normally
+ * occur while waiting for another node in the data
+ * shipping collective. Several libraries use SIGALRM; the
+ * thread that makes the gpfs_fcntl() call should use
+ * sigthreadmask to mask off delivery of this signal while
+ * inside the call.
+ * Return: Nothing
+ * Programmer: Bill Wendling, 28. May 2002
+ * Modifications:
+ */
+ static void
+gpfs_stop_data_shipping(int handle)
+{
+ struct {
+ gpfsFcntlHeader_t hdr;
+ gpfsDataShipStop_t stop;
+ } ds_stop;
+
+ ds_stop.hdr.totalLength = sizeof(ds_stop);
+ ds_stop.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+ ds_stop.hdr.fcntlReserved = 0;
+ ds_stop.stop.structLen = sizeof(ds_stop.stop);
+ ds_stop.stop.structType = GPFS_DATA_SHIP_STOP;
+
+ if (gpfs_fcntl(handle, &ds_stop) != 0)
+ fprintf(stderr,
+ "gpfs_fcntl DS stop directive failed. errno=%d errorOffset=%d\n",
+ errno, ds_stop.hdr.errorOffset);
+}
+
+/*
+ * Function: gpfs_invalidate_file_cache
+ * Purpose: Invalidate all cached data held on behalf of a file on
+ * this node.
+ * Return: Nothing
+ * Programmer: Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+ static void
+gpfs_invalidate_file_cache(const char *filename)
+{
+ int handle;
+ struct {
+ gpfsFcntlHeader_t hdr;
+ gpfsClearFileCache_t inv;
+ } inv_cache_hint;
+
+ /* Open the file. If the open fails, the file cannot be cached. */
+ handle = open(filename, O_RDONLY, 0);
+
+ if (handle == -1)
+ return;
+
+ /* Issue the invalidate hint */
+ inv_cache_hint.hdr.totalLength = sizeof(inv_cache_hint);
+ inv_cache_hint.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+ inv_cache_hint.hdr.fcntlReserved = 0;
+ inv_cache_hint.inv.structLen = sizeof(gpfsClearFileCache_t);
+ inv_cache_hint.inv.structType = GPFS_CLEAR_FILE_CACHE;
+
+ if (gpfs_fcntl(handle, &inv_cache_hint) != 0) {
+ fprintf(stderr,
+ "gpfs_fcntl clear cache hint failed for file '%s'.",
+ filename);
+ fprintf(stderr, " errno=%d errorOffset=%d\n",
+ errno, inv_cache_hint.hdr.errorOffset);
+ exit(1);
+ }
+
+ /* Close the file */
+ if (close(handle) == -1) {
+ fprintf(stderr,
+ "could not close file '%s' after flushing file cache, ",
+ filename);
+ fprintf(stderr, "errno=%d\n", errno);
+ exit(1);
+ }
+}
+
+#else
+
+/* turn the stubs off since some compilers are warning they are not used */
+#if 0
+/* H5_HAVE_GPFS isn't defined...stub functions */
+
+ static void
+gpfs_access_range(int UNUSED handle, off_t UNUSED start, off_t UNUSED length,
+ int UNUSED is_write)
+{
+ return;
+}
+
+ static void
+gpfs_free_range(int UNUSED handle, off_t UNUSED start, off_t UNUSED length)
+{
+ return;
+}
+
+ static void
+gpfs_clear_file_cache(int UNUSED handle)
+{
+ return;
+}
+
+ static void
+gpfs_cancel_hints(int UNUSED handle)
+{
+ return;
+}
+
+ static void
+gpfs_start_data_shipping(int UNUSED handle, int UNUSED num_insts)
+{
+ return;
+}
+
+ static void
+gpfs_stop_data_shipping(int UNUSED handle)
+{
+ return;
+}
+
+ static void
+gpfs_start_data_ship_map(int UNUSED handle, int UNUSED partition_size,
+ int UNUSED agent_count, int UNUSED *agent_node_num)
+{
+ return;
+}
+
+ static void
+gpfs_invalidate_file_cache(const char UNUSED *filename)
+{
+ return;
+}
+
+#endif /* 0 */
+
+#endif /* H5_HAVE_GPFS */
+
+