[svn-r14903] Undoing change committed in r14902.

9 files changed, 4424 insertions, 7 deletions

diff --git a/perform/Makefile.am b/perform/Makefile.am
index e2c5822..f82def8 100644
--- a/perform/Makefile.am
+++ b/perform/Makefile.am
@@ -39,10 +39,11 @@ endif
 
 # These are the programs that `make all' or `make tests' will build and which
 # `make check' will run. List them in the order they should be run.
-TEST_PROG = iopipe chunk overhead zip_perf perf_meta $(BUILD_ALL_PROGS)
+TEST_PROG = iopipe chunk overhead zip_perf perf_meta h5perf_serial $(BUILD_ALL_PROGS)
 check_PROGRAMS=$(TEST_PROG_PARA) $(TEST_PROG)
 
 h5perf_SOURCES=pio_perf.c pio_engine.c pio_timer.c
+h5perf_serial_SOURCES=sio_perf.c sio_engine.c sio_timer.c
 
 # These are the files that `make clean' (and derivatives) will remove from
 # this directory.
@@ -52,6 +53,7 @@ CLEANFILES=*.h5 *.raw *.dat x-gnuplot
 # depend on test or tools library.
 LDADD=$(LIBHDF5)
 h5perf_LDADD=$(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+h5perf_serial_LDADD=$(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
 perf_LDADD=$(LIBH5TEST) $(LIBHDF5)
 iopipe_LDADD=$(LIBH5TEST) $(LIBHDF5)
 zip_perf_LDADD=$(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
diff --git a/perform/Makefile.in b/perform/Makefile.in
index 3ba09a9..a4dc884 100644
--- a/perform/Makefile.in
+++ b/perform/Makefile.in
@@ -67,7 +67,8 @@ CONFIG_CLEAN_FILES =
 @BUILD_PARALLEL_CONDITIONAL_TRUE@	mpi-perf$(EXEEXT)
 @BUILD_ALL_CONDITIONAL_TRUE@am__EXEEXT_3 = $(am__EXEEXT_2)
 am__EXEEXT_4 = iopipe$(EXEEXT) chunk$(EXEEXT) overhead$(EXEEXT) \
-	zip_perf$(EXEEXT) perf_meta$(EXEEXT) $(am__EXEEXT_3)
+	zip_perf$(EXEEXT) perf_meta$(EXEEXT) h5perf_serial$(EXEEXT) \
+	$(am__EXEEXT_3)
 benchpar_SOURCES = benchpar.c
 benchpar_OBJECTS = benchpar.$(OBJEXT)
 benchpar_LDADD = $(LDADD)
@@ -80,6 +81,10 @@ am_h5perf_OBJECTS = pio_perf.$(OBJEXT) pio_engine.$(OBJEXT) \
 	pio_timer.$(OBJEXT)
 h5perf_OBJECTS = $(am_h5perf_OBJECTS)
 h5perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+am_h5perf_serial_OBJECTS = sio_perf.$(OBJEXT) sio_engine.$(OBJEXT) \
+	sio_timer.$(OBJEXT)
+h5perf_serial_OBJECTS = $(am_h5perf_serial_OBJECTS)
+h5perf_serial_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
 iopipe_SOURCES = iopipe.c
 iopipe_OBJECTS = iopipe.$(OBJEXT)
 iopipe_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
@@ -112,10 +117,12 @@ CCLD = $(CC)
 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 	$(LDFLAGS) -o $@
-SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) iopipe.c mpi-perf.c \
-	overhead.c perf.c perf_meta.c zip_perf.c
-DIST_SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) iopipe.c \
-	mpi-perf.c overhead.c perf.c perf_meta.c zip_perf.c
+SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \
+	$(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
+	perf_meta.c zip_perf.c
+DIST_SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \
+	$(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
+	perf_meta.c zip_perf.c
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -358,8 +365,9 @@ INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/tools/lib
 
 # These are the programs that `make all' or `make tests' will build and which
 # `make check' will run. List them in the order they should be run.
-TEST_PROG = iopipe chunk overhead zip_perf perf_meta $(BUILD_ALL_PROGS)
+TEST_PROG = iopipe chunk overhead zip_perf perf_meta h5perf_serial $(BUILD_ALL_PROGS)
 h5perf_SOURCES = pio_perf.c pio_engine.c pio_timer.c
+h5perf_serial_SOURCES = sio_perf.c sio_engine.c sio_timer.c
 
 # These are the files that `make clean' (and derivatives) will remove from
 # this directory.
@@ -369,6 +377,7 @@ CLEANFILES = *.h5 *.raw *.dat x-gnuplot
 # depend on test or tools library.
 LDADD = $(LIBHDF5)
 h5perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+h5perf_serial_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
 perf_LDADD = $(LIBH5TEST) $(LIBHDF5)
 iopipe_LDADD = $(LIBH5TEST) $(LIBHDF5)
 zip_perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
@@ -438,6 +447,9 @@ chunk$(EXEEXT): $(chunk_OBJECTS) $(chunk_DEPENDENCIES)
 h5perf$(EXEEXT): $(h5perf_OBJECTS) $(h5perf_DEPENDENCIES) 
 	@rm -f h5perf$(EXEEXT)
 	$(LINK) $(h5perf_OBJECTS) $(h5perf_LDADD) $(LIBS)
+h5perf_serial$(EXEEXT): $(h5perf_serial_OBJECTS) $(h5perf_serial_DEPENDENCIES) 
+	@rm -f h5perf_serial$(EXEEXT)
+	$(LINK) $(h5perf_serial_OBJECTS) $(h5perf_serial_LDADD) $(LIBS)
 iopipe$(EXEEXT): $(iopipe_OBJECTS) $(iopipe_DEPENDENCIES) 
 	@rm -f iopipe$(EXEEXT)
 	$(LINK) $(iopipe_OBJECTS) $(iopipe_LDADD) $(LIBS)
@@ -473,6 +485,9 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pio_engine.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pio_perf.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pio_timer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sio_engine.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sio_perf.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sio_timer.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zip_perf.Po@am__quote@
 
 .c.o:
diff --git a/perform/sio_engine.c b/perform/sio_engine.c
new file mode 100644
index 0000000..92d6f1c
--- /dev/null
+++ b/perform/sio_engine.c
@@ -0,0 +1,1746 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by the Board of Trustees of the University of Illinois.         *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have     *
+ * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Author: Christian Chilan, April 2008 
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <errno.h>
+
+#include "hdf5.h"
+
+#ifdef H5_HAVE_GPFS
+#   include <gpfs_fcntl.h>
+#endif  /* H5_HAVE_GPFS */
+
+#include "sio_perf.h"
+#include "sio_timer.h"
+
+/* Macro definitions */
+
+/* sizes of various items. these sizes won't change during program execution */
+/* The following three must have the same type */
+#define ELMT_SIZE           (sizeof(unsigned char))     /* we're doing bytes */
+#define ELMT_H5_TYPE        H5T_NATIVE_UCHAR
+
+#define GOTOERROR(errcode)  { ret_code = errcode; goto done; }
+#define GOTODONE        { goto done; }
+#define ERRMSG(mesg) {                                                  \
+    fprintf(stderr, "*** Assertion failed (%s) at line %4d in %s\n",    \
+        mesg, (int)__LINE__, __FILE__);                             \
+}
+
+#define MSG(mesg) {                                     \
+    fprintf(stderr, "(%s) at line %4d in %s\n",         \
+        mesg, (int)__LINE__, __FILE__);             \
+}
+
+/* verify: if val is false (0), print mesg. */
+#define VRFY(val, mesg) do {                            \
+    if (!val) {                                         \
+    ERRMSG(mesg);                                   \
+    GOTOERROR(FAIL);                                \
+    }                                                   \
+} while(0)
+
+/* POSIX I/O macros */
+#define POSIXCREATE(fn)           HDopen(fn, O_CREAT|O_TRUNC|O_RDWR, 0600)
+#define POSIXOPEN(fn, F)          HDopen(fn, F, 0600)
+#define POSIXCLOSE(F)             HDclose(F)
+#define POSIXSEEK(F,L)            HDlseek(F, L, SEEK_SET)
+#define POSIXWRITE(F,B,S)         HDwrite(F,B,S)
+#define POSIXREAD(F,B,S)          HDread(F,B,S)
+
+enum {
+    SIO_CREATE = 1,
+    SIO_WRITE = 2,
+    SIO_READ = 4
+};
+
+/* Global variables */
+static int  clean_file_g = -1;  /*whether to cleanup temporary test     */
+/*files. -1 is not defined;             */
+/*0 is no cleanup; 1 is do cleanup      */
+
+/*
+ * In a parallel machine, the filesystem suitable for compiling is
+ * unlikely a parallel file system that is suitable for parallel I/O.
+ * There is no standard pathname for the parallel file system.  /tmp
+ * is about the best guess.
+ */
+#ifndef HDF5_PARAPREFIX
+#  ifdef __PUMAGON__
+/* For the PFS of TFLOPS */
+#    define HDF5_PARAPREFIX     "pfs:/pfs_grande/multi/tmp_1"
+#  else
+#    define HDF5_PARAPREFIX     ""
+#  endif    /* __PUMAGON__ */
+#endif  /* !HDF5_PARAPREFIX */
+
+#ifndef MIN
+#   define MIN(a,b) ((a) < (b) ? (a) : (b))
+#endif  /* !MIN */
+
+/* the different types of file descriptors we can expect */
+typedef union _file_descr {
+    int         posixfd;    /* POSIX file handle*/
+    hid_t       h5fd;       /* HDF5 file        */
+} file_descr;
+
+/* local functions */
+static char  *sio_create_filename(iotype iot, const char *base_name,
+    char *fullname, size_t size, parameters *param);
+static herr_t do_write(results *res, file_descr *fd, parameters *parms, void *buffer);
+static herr_t do_read(results *res, file_descr *fd, parameters *parms, void *buffer);
+static herr_t dset_write(int local_dim, file_descr *fd, parameters *parms, void *buffer);
+static herr_t posix_buffer_write(int local_dim, file_descr *fd, parameters *parms, void *buffer);
+static herr_t dset_read(int localrank, file_descr *fd, parameters *parms, void *buffer);
+static herr_t posix_buffer_read(int local_dim, file_descr *fd, parameters *parms, void *buffer);
+static herr_t do_fopen(parameters *param, char *fname, file_descr *fd /*out*/,
+    int flags);
+hid_t set_vfd(parameters *param);
+static herr_t do_fclose(iotype iot, file_descr *fd);
+static void do_cleanupfile(iotype iot, char *fname);
+
+/* GPFS-specific functions */
+#ifdef H5_HAVE_GPFS
+static void gpfs_access_range(int handle, off_t start, off_t length, int is_write);
+static void gpfs_free_range(int handle, off_t start, off_t length);
+static void gpfs_clear_file_cache(int handle);
+static void gpfs_cancel_hints(int handle);
+static void gpfs_start_data_shipping(int handle, int num_insts);
+static void gpfs_start_data_ship_map(int handle, int partition_size,
+    int agent_count, int *agent_node_num);
+static void gpfs_stop_data_shipping(int handle);
+static void gpfs_invalidate_file_cache(const char *filename);
+#endif /* H5_HAVE_GPFS */
+
+/* global variables */
+static off_t offset[MAX_DIMS];       /* dataset size in bytes     */
+static size_t buf_offset[MAX_DIMS];   /* dataset size in bytes     */
+static int order[MAX_DIMS];        /* dimension access order */
+static size_t      linear_buf_size;        /* linear buffer size     */
+static int         cont_dim;       /* lowest dimension for contiguous POSIX  
+                                      access */
+static size_t      cont_size;      /* size of contiguous POSIX access */
+static hid_t       fapl;           /* file access list */
+static unsigned char *buf_p;       /* buffer pointer */
+static unsigned char *buf2_p;      /* buffer pointer */
+static const char *multi_letters = "msbrglo"; /* string for multi driver */
+static char *buffer2=NULL;         /* buffer for data verification */
+
+/* HDF5 global variables */
+static hsize_t     h5count[MAX_DIMS];      /*selection count               */
+static hssize_t    h5offset[MAX_DIMS];     /* Selection offset within dataspace */
+static hid_t       h5dset_space_id = -1;   /*dataset space ID              */
+static hid_t       h5mem_space_id = -1;    /*memory dataspace ID           */
+static hid_t       h5ds_id = -1;           /*dataset handle                */
+static hid_t       h5dcpl = -1;            /* Dataset creation property list */
+static hid_t       h5dxpl = -1;            /* Dataset transfer property list */
+
+/*
+ * Function:        do_sio
+ * Purpose:         SIO Engine where IO are executed.
+ * Return:          results
+ * Programmer:      Christian Chilan, April, 2008 
+ * Modifications:
+ */
+    results
+do_sio(parameters param)
+{
+    char       *buffer = NULL; /*data buffer pointer           */
+    off_t       nbytes;                 /* dataset raw size */
+    off_t       dset_size[MAX_DIMS];    /* dataset size in bytes     */
+    size_t      buf_size[MAX_DIMS];     /* general buffer size in bytes     */
+    size_t      chk_size[MAX_DIMS];     /* chunk size in bytes     */
+    file_descr  fd;                     /* file handles */
+    iotype      iot;                    /* API type */
+    char base_name[256];                /* test file base name */
+    /* return codes */
+    herr_t      ret_code = 0;   /*return code                           */
+    results     res;
+
+    char        fname[FILENAME_MAX];    /* test file name */
+    int     i;
+    /* HDF5 variables */
+    herr_t          hrc;        /*HDF5 return code              */
+
+    /* Sanity check parameters */
+
+    /* IO type */
+    iot = param.io_type;
+
+    switch (iot) {
+    case POSIXIO:
+        fd.posixfd = -1;
+        res.timers = sio_time_new();
+        break;
+    case HDF5:
+        fd.h5fd = -1;
+        res.timers = sio_time_new();
+        break;
+    default:
+        /* unknown request */
+        fprintf(stderr, "Unknown IO type request (%d)\n", iot);
+        GOTOERROR(FAIL);
+    }
+
+    nbytes = param.num_bytes;     
+    linear_buf_size = 1;
+
+    for (i=0; i<param.rank; i++){
+        dset_size[i] = param.dset_size[i];
+        buf_size[i] = param.buf_size[i];
+        chk_size[i] = param.chk_size[i];
+        order[i] = param.order[i];
+        linear_buf_size *= buf_size[i];
+        buf_offset[i] = 0;
+        offset[i] = 0;
+
+        /* Validate transfer buffer size */
+        if (param.buf_size[i]<=0) {
+            HDfprintf(stderr,
+            "Transfer buffer size[%d] (%Hd) must be > 0\n", i,(long_long)buf_size[i]);
+            GOTOERROR(FAIL);
+        }
+
+        if ((param.dset_size[i]%param.buf_size[i])!=0) {
+            HDfprintf(stderr,
+            "Dataset size[%d] (%Hd) must be a multiple of the "
+            "trasfer buffer size[%d] (%Hd)\n",param.rank,
+            (long_long)param.dset_size[i], param.rank, (long_long)param.buf_size[i]);
+            GOTOERROR(FAIL);
+        }
+
+    }
+
+    /* Allocate transfer buffer */
+    buffer2 = malloc(linear_buf_size); 
+    if ((buffer = malloc(linear_buf_size)) == NULL){
+        HDfprintf(stderr, "malloc for transfer buffer size (%Hd) failed\n",
+        (long_long)(linear_buf_size));
+        GOTOERROR(FAIL);
+    }
+
+    if (sio_debug_level >= 4) 
+
+    /* output all of the times for all iterations */
+        fprintf(output, "Timer details:\n");
+
+    /*
+     * Write performance measurement
+     */
+    /* Open file for write */
+
+    strcpy(base_name, "#sio_tmp");
+    sio_create_filename(iot, base_name, fname, sizeof(fname), &param);
+
+    if (sio_debug_level > 0)
+        HDfprintf(output, "data filename=%s\n",
+             fname);
+
+    set_time(res.timers, HDF5_GROSS_WRITE_FIXED_DIMS, START);
+    hrc = do_fopen(&param, fname, &fd, SIO_CREATE | SIO_WRITE);
+    VRFY((hrc == SUCCESS), "do_fopen failed");
+
+    set_time(res.timers, HDF5_FINE_WRITE_FIXED_DIMS, START);
+    hrc = do_write(&res, &fd, &param, buffer);
+    set_time(res.timers, HDF5_FINE_WRITE_FIXED_DIMS, STOP);
+    VRFY((hrc == SUCCESS), "do_write failed");
+
+    /* Close file for write */
+    hrc = do_fclose(iot, &fd);
+    set_time(res.timers, HDF5_GROSS_WRITE_FIXED_DIMS, STOP);
+    VRFY((hrc == SUCCESS), "do_fclose failed");
+
+    if (!param.h5_write_only) {
+        /*
+         * Read performance measurement
+         */
+
+        /* Open file for read */
+        set_time(res.timers, HDF5_GROSS_READ_FIXED_DIMS, START);
+        hrc = do_fopen(&param, fname, &fd, SIO_READ);
+        VRFY((hrc == SUCCESS), "do_fopen failed");
+
+        set_time(res.timers, HDF5_FINE_READ_FIXED_DIMS, START);
+        hrc = do_read(&res, &fd, &param, buffer);
+        set_time(res.timers, HDF5_FINE_READ_FIXED_DIMS, STOP);
+        VRFY((hrc == SUCCESS), "do_read failed");
+
+        /* Close file for read */
+        hrc = do_fclose(iot, &fd);
+
+        set_time(res.timers, HDF5_GROSS_READ_FIXED_DIMS, STOP);
+        VRFY((hrc == SUCCESS), "do_fclose failed");
+    }
+    
+    do_cleanupfile(iot, fname);
+
+done:
+    /* clean up */
+    /* release HDF5 objects */
+
+    /* close any opened files */
+    /* no remove(fname) because that should have happened normally. */
+    switch (iot) {
+        case POSIXIO:
+            if (fd.posixfd != -1)
+                hrc = do_fclose(iot, &fd);
+            break;
+        case HDF5:
+            if (fd.h5fd != -1)
+                hrc = do_fclose(iot, &fd);
+            break;
+    }
+
+    /* release generic resources */
+    if (buffer)
+        free(buffer);
+
+    res.ret_code = ret_code;
+    return res;
+}
+
+/*
+ * Function:    sio_create_filename
+ * Purpose:     Create a new filename to write to. Determine the correct
+ *              suffix to append to the filename by the type of I/O we're
+ *              doing. Also, place in the /tmp/{$USER,$LOGIN} directory if
+ *              USER or LOGIN are specified in the environment.
+ * Return:      Pointer to filename or NULL
+ * Programmer:  Bill Wendling, 21. November 2001
+ * Modifications: Support for file drivers. Christian Chilan, April, 2008
+ */
+    static char *
+sio_create_filename(iotype iot, const char *base_name, char *fullname, size_t size, parameters *param)
+{
+    const char *prefix, *suffix="";
+    char *ptr, last = '\0';
+    size_t i, j;
+    vfdtype vfd; 
+    vfd = param->vfd; 
+
+    if (!base_name || !fullname || size < 1)
+    return NULL;
+
+    memset(fullname, 0, size);
+
+    switch (iot) {
+    case POSIXIO:
+        suffix = ".posix";
+        break;
+    case HDF5:
+        suffix = ".h5";
+        if (vfd == family)
+            suffix = "%05d.h5";
+        else if (vfd == multi)
+            suffix = NULL;
+        break;
+    }
+
+    /* First use the environment variable and then try the constant */
+    prefix = getenv("HDF5_PARAPREFIX");
+
+#ifdef HDF5_PARAPREFIX
+    if (!prefix)
+    prefix = HDF5_PARAPREFIX;
+#endif  /* HDF5_PARAPREFIX */
+
+    /* Prepend the prefix value to the base name */
+    if (prefix && *prefix) {
+    /* If the prefix specifies the HDF5_PARAPREFIX directory, then
+     * default to using the "/tmp/$USER" or "/tmp/$LOGIN"
+     * directory instead. */
+    register char *user, *login, *subdir;
+
+    user = getenv("USER");
+    login = getenv("LOGIN");
+    subdir = (user ? user : login);
+
+    if (subdir) {
+        for (i = 0; i < size && prefix[i]; i++)
+        fullname[i] = prefix[i];
+
+        fullname[i++] = '/';
+
+        for (j = 0; i < size && subdir[j]; i++, j++)
+        fullname[i] = subdir[j];
+    } else {
+        /* We didn't append the prefix yet */
+        strncpy(fullname, prefix, MIN(strlen(prefix), size));
+    }
+
+    if ((strlen(fullname) + strlen(base_name) + 1) < size) {
+        /* Append the base_name with a slash first. Multiple slashes are
+         * handled below. */
+        h5_stat_t buf;
+
+        if (HDstat(fullname, &buf) < 0)
+        /* The directory doesn't exist just yet */
+        if (mkdir(fullname, (mode_t)0755) < 0 && errno != EEXIST) {
+            /* We couldn't make the "/tmp/${USER,LOGIN}" subdirectory.
+             * Default to PREFIX's original prefix value. */
+            strcpy(fullname, prefix);
+        }
+
+        strcat(fullname, "/");
+        strcat(fullname, base_name);
+    } else {
+        /* Buffer is too small */
+        return NULL;
+    }
+    } else if (strlen(base_name) >= size) {
+    /* Buffer is too small */
+        return NULL;
+    } else {
+        strcpy(fullname, base_name);
+    }
+
+    /* Append a suffix */
+    if (suffix) {
+        if (strlen(fullname) + strlen(suffix) >= size)
+            return NULL;
+
+        strcat(fullname, suffix);
+    }
+
+    /* Remove any double slashes in the filename */
+    for (ptr = fullname, i = j = 0; ptr && i < size; i++, ptr++) {
+    if (*ptr != '/' || last != '/')
+        fullname[j++] = *ptr;
+
+    last = *ptr;
+    }
+
+    return fullname;
+}
+
+/*
+ * Function:        do_write
+ * Purpose:         Write the required amount of data to the file.
+ * Return:          SUCCESS or FAIL
+ * Programmer:      Christian Chilan, April, 2008 
+ * Modifications:
+ */
+static herr_t
+do_write(results *res, file_descr *fd, parameters *parms, void *buffer)
+{
+    int         ret_code = SUCCESS;
+    char        dname[64];
+    long        i;
+    /* HDF5 variables */
+    herr_t      hrc;                    /*HDF5 return code              */
+    hsize_t     h5dims[MAX_DIMS];       /*dataset dim sizes             */
+    hsize_t     h5chunk[MAX_DIMS];      /*dataset dim sizes             */
+    hsize_t     h5block[MAX_DIMS];      /*dataspace selection           */
+    hsize_t     h5stride[MAX_DIMS];     /*selection stride              */
+    hsize_t     h5start[MAX_DIMS];      /*selection start               */
+    hsize_t     h5maxdims[MAX_DIMS];
+    int         rank;                   /*rank of dataset */
+        /* Prepare buffer for verifying data */
+/*    if (parms->verify)
+            memset(buffer,1,linear_buf_size); */
+
+    buf_p=(unsigned char *)buffer;
+
+    for (i=0; i < linear_buf_size; i++)
+        buf_p[i]=i%128;
+
+    rank = parms->rank;
+
+    for (i=0; i<rank; i++) {
+        h5offset[i] = offset[i] = 0;
+    }
+
+    /* I/O Access specific setup */
+    switch (parms->io_type) {
+    case POSIXIO:
+
+            /* determine lowest dimension for contiguous POSIX access */
+            cont_dim = rank;
+            
+            for (i=rank-1; i>=0; i--) {
+                if (parms->buf_size[i]==parms->dset_size[i])
+                    cont_dim = i;
+                else
+                    break;
+            }
+
+            /* determine size of the contiguous POSIX access */ 
+            cont_size = (!cont_dim)? 1 : parms->buf_size[cont_dim-1];
+            for (i=cont_dim; i<rank; i++)
+                cont_size *= parms->buf_size[i];
+
+        break;
+
+    case HDF5: /* HDF5 setup */
+
+        for (i=0; i < rank; i++){
+            h5dims[i] = parms->dset_size[i];
+            h5start[i] = 0;
+            h5stride[i] = 1;
+            h5block[i] = 1;
+            h5count[i] = parms->buf_size[i];
+            h5chunk[i] = parms->chk_size[i];
+            h5maxdims[i] = H5S_UNLIMITED;
+            
+        }
+
+        if (parms->h5_use_chunks && parms->h5_extendable) {
+            h5dset_space_id = H5Screate_simple(rank, h5count, h5maxdims);
+            VRFY((h5dset_space_id >= 0), "H5Screate_simple");
+        }
+        else {
+            h5dset_space_id = H5Screate_simple(rank, h5dims, NULL);
+            VRFY((h5dset_space_id >= 0), "H5Screate_simple");
+        }
+
+        hrc = H5Sselect_hyperslab(h5dset_space_id, H5S_SELECT_SET,
+                    h5start, h5stride, h5count, h5block); 
+        VRFY((hrc >= 0), "H5Sselect_hyperslab");
+
+        /* Create the memory dataspace that corresponds to the xfer buffer */
+        h5mem_space_id = H5Screate_simple(rank, h5count, NULL);
+        VRFY((h5mem_space_id >= 0), "H5Screate_simple");
+
+        /* Create the dataset transfer property list */
+        h5dxpl = H5Pcreate(H5P_DATASET_XFER);
+        if (h5dxpl < 0) {
+            fprintf(stderr, "HDF5 Property List Create failed\n");
+            GOTOERROR(FAIL);
+        }
+
+        break;        
+    } /* end switch */
+
+
+    /* create dataset */
+    switch (parms->io_type) {
+        case POSIXIO:
+        break;
+
+        case HDF5:
+            h5dcpl = H5Pcreate(H5P_DATASET_CREATE);
+
+        if (h5dcpl < 0) {
+            fprintf(stderr, "HDF5 Property List Create failed\n");
+            GOTOERROR(FAIL);
+        }
+
+        if(parms->h5_use_chunks) {
+        /* Set the chunk size to be the same as the buffer size */
+            hrc = H5Pset_chunk(h5dcpl, rank, h5chunk);
+            if (hrc < 0) {
+                fprintf(stderr, "HDF5 Property List Set failed\n");
+                GOTOERROR(FAIL);
+            } /* end if */
+        } /* end if */
+
+        sprintf(dname, "Dataset_%ld", (unsigned long)parms->num_bytes);
+        h5ds_id = H5Dcreate2(fd->h5fd, dname, ELMT_H5_TYPE,
+            h5dset_space_id, H5P_DEFAULT, h5dcpl, H5P_DEFAULT);
+
+        if (h5ds_id < 0) {
+            fprintf(stderr, "HDF5 Dataset Create failed\n");
+            GOTOERROR(FAIL);
+        }
+
+        hrc = H5Pclose(h5dcpl);
+        /* verifying the close of the dcpl */
+        if (hrc < 0) {
+            fprintf(stderr, "HDF5 Property List Close failed\n");
+            GOTOERROR(FAIL);
+        }
+
+        break;
+    }
+
+    /* Start "raw data" write timer */
+    set_time(res->timers, HDF5_RAW_WRITE_FIXED_DIMS, START);
+
+    /* Perform write */
+    hrc = dset_write(rank-1, fd, parms, buffer);
+    
+    if (hrc < 0) {
+        fprintf(stderr, "Error in dataset write\n");
+        GOTOERROR(FAIL);
+    }
+
+
+    /* Stop "raw data" write timer */
+    set_time(res->timers, HDF5_RAW_WRITE_FIXED_DIMS, STOP);
+
+    /* Calculate write time */
+
+    /* Close dataset. Only HDF5 needs to do an explicit close. */
+    if (parms->io_type == HDF5) {
+        hrc = H5Dclose(h5ds_id);
+
+        if (hrc < 0) {
+            fprintf(stderr, "HDF5 Dataset Close failed\n");
+            GOTOERROR(FAIL);
+        }
+
+        h5ds_id = -1;
+    } /* end if */
+
+done:
+
+    /* release HDF5 objects */
+    if (h5dset_space_id != -1) {
+        hrc = H5Sclose(h5dset_space_id);
+        if (hrc < 0){
+            fprintf(stderr, "HDF5 Dataset Space Close failed\n");
+            ret_code = FAIL;
+        } else {
+            h5dset_space_id = -1;
+        }
+    }
+
+    if (h5mem_space_id != -1) {
+        hrc = H5Sclose(h5mem_space_id);
+        if (hrc < 0) {
+            fprintf(stderr, "HDF5 Memory Space Close failed\n");
+            ret_code = FAIL;
+        } else {
+            h5mem_space_id = -1;
+        }
+    }
+
+    if (h5dxpl != -1) {
+        hrc = H5Pclose(h5dxpl);
+        if (hrc < 0) {
+            fprintf(stderr, "HDF5 Dataset Transfer Property List Close failed\n");
+            ret_code = FAIL;
+        } else {
+            h5dxpl = -1;
+        }
+    }
+
+    return ret_code;
+}
+
+/*
+ * Function:        dset_write
+ * Purpose:         Write buffer into the dataset. 
+ * Return:          SUCCESS or FAIL
+ * Programmer:      Christian Chilan, April, 2008
+ * Modifications:
+ */
+
+static herr_t dset_write(int local_dim, file_descr *fd, parameters *parms, void *buffer)
+{
+    int cur_dim = order[local_dim]-1;
+    int         ret_code = SUCCESS;
+    int         k;
+    hsize_t	dims[MAX_DIMS], maxdims[MAX_DIMS];
+    long i,j;
+    herr_t hrc;
+
+    /* iterates according to the dimensions in order array */ 
+    for (i=0; i < parms->dset_size[cur_dim]; i += parms->buf_size[cur_dim]){
+
+        h5offset[cur_dim] = offset[cur_dim] = i;
+            
+        if (local_dim > 0){
+
+            dset_write(local_dim-1, fd, parms, buffer);
+
+        }else{
+
+            switch (parms->io_type) {
+
+            case POSIXIO:
+                /* initialize POSIX offset in the buffer */
+                for (j=0; j < parms->rank; j++) {
+                    buf_offset[j]=0;
+                }
+                buf_p = (unsigned char *)buffer;
+                /* write POSIX buffer */
+                posix_buffer_write(0, fd, parms, buffer);
+                break;
+
+            case HDF5:
+                /* if dimensions are extendable, extend them as needed during
+                access */
+                if (parms->h5_use_chunks && parms->h5_extendable) {
+
+                    hrc=H5Sget_simple_extent_dims(h5dset_space_id,dims,maxdims);
+                    VRFY((hrc >= 0), "H5Sget_simple_extent_dims");
+
+                    for (k=0; k < parms->rank; k++){
+
+                        if (dims[k] <= h5offset[k]) {
+                            dims[k] = dims[k]+h5count[k];
+                            hrc=H5Sset_extent_simple(h5dset_space_id,parms->rank,dims,maxdims);
+                            VRFY((hrc >= 0), "H5Sset_extent_simple");
+                            hrc=H5Dset_extent(h5ds_id,dims);
+                            VRFY((hrc >= 0), "H5Dextend");
+                        }
+                    }
+                }
+                /* applies offset */               
+                hrc = H5Soffset_simple(h5dset_space_id, h5offset);
+                VRFY((hrc >= 0), "H5Soffset_simple");
+
+                /* Write the buffer out */
+                hrc=H5Sget_simple_extent_dims(h5dset_space_id,dims,maxdims);
+                hrc = H5Dwrite(h5ds_id, ELMT_H5_TYPE, h5mem_space_id,
+                    h5dset_space_id, h5dxpl, buffer);
+                VRFY((hrc >= 0), "H5Dwrite");
+
+                break;
+            } /* switch (parms->io_type) */
+        }
+    }
+done:
+    return ret_code;
+}
+
+/*
+ * Function:        posix_buffer_write 
+ * Purpose:         Write buffer into the POSIX file considering contiguity.
+ * Return:          SUCCESS or FAIL
+ * Programmer:      Christian Chilan, April, 2008
+ * Modifications:
+ */
+
+static herr_t posix_buffer_write(int local_dim, file_descr *fd, parameters *parms, void *buffer)
+{
+    int dtype_size = 1;
+    int         ret_code = SUCCESS;
+    long i;
+    size_t d_offset;
+    size_t linear_dset_offset = 0;
+    int j, rc;
+
+    /* if dimension is not contiguous, call recursively */
+    if (local_dim < parms->rank-1 && local_dim != cont_dim) {
+
+        for (i=0; i < parms->buf_size[local_dim]; i += dtype_size) {
+            buf_offset[local_dim] = i;
+            posix_buffer_write(local_dim+1, fd, parms, buffer);
+
+            /* if next dimension is cont_dim, it will fill out the buffer
+               traversing the entire dimension local_dim without the need
+               of performing iteration */
+            if (local_dim+1==cont_dim)
+                break;
+        }
+    /* otherwise, perform contiguous POSIX access */
+    } else {
+
+        buf_offset[local_dim] = 0;
+
+        /* determine offset in the buffer */
+        for (i=0; i < parms->rank; i++){
+            d_offset=1;
+
+            for (j=i+1; j < parms->rank; j++)
+                d_offset *= parms->dset_size[j];
+
+            linear_dset_offset += (offset[i]+buf_offset[i])*d_offset;
+        }
+
+        /* only care if seek returns error */
+        rc = POSIXSEEK(fd->posixfd, linear_dset_offset) < 0 ? -1 : 0;
+        VRFY((rc==0), "POSIXSEEK");
+        /* check if all bytes are written */
+        rc = ((ssize_t)cont_size ==
+             POSIXWRITE(fd->posixfd, buf_p, cont_size));
+        VRFY((rc != 0), "POSIXWRITE");
+
+        /* Advance location in buffer */
+        buf_p += cont_size;
+
+    }
+done:
+    return ret_code;
+}
+
+/*
+ * Function:        do_read
+ * Purpose:         Read the required amount of data to the file.
+ * Return:          SUCCESS or FAIL
+ * Programmer:      Christian Chilan, April, 2008 
+ * Modifications:
+ */
+static herr_t
+do_read(results *res, file_descr *fd, parameters *parms, void *buffer)
+{
+    int         ret_code = SUCCESS;
+    char        dname[64];
+    long        i;
+    /* HDF5 variables */
+    herr_t      hrc;                    /*HDF5 return code              */
+    hsize_t     h5dims[MAX_DIMS];       /*dataset dim sizes             */
+    hsize_t     h5chunk[MAX_DIMS];      /*dataset dim sizes             */
+    hsize_t     h5block[MAX_DIMS];      /*dataspace selection           */
+    hsize_t     h5stride[MAX_DIMS];     /*selection stride              */
+    hsize_t     h5start[MAX_DIMS];      /*selection start               */
+    int         rank;
+
+        /* Prepare buffer for verifying data */
+        for (i=0; i < linear_buf_size; i++)
+            buffer2[i]=i%128;
+
+    rank = parms->rank;
+    for (i=0; i<rank; i++) {
+        h5offset[i] = offset[i] = 0;
+    }
+
+    /* I/O Access specific setup */
+    switch (parms->io_type) {
+    case POSIXIO:
+            cont_dim = rank;
+            
+            for (i=rank-1; i>=0; i--) {
+                if (parms->buf_size[i]==parms->dset_size[i])
+                    cont_dim = i;
+                else
+                    break;
+            }
+            cont_size = (!cont_dim)? 1 : parms->buf_size[cont_dim-1];
+            for (i=cont_dim; i<rank; i++)
+                cont_size *= parms->buf_size[i];
+
+        break;
+
+    case HDF5: /* HDF5 setup */
+        for (i=0; i < rank; i++){
+            h5dims[i] = parms->dset_size[i];
+            h5start[i] = 0;
+            h5stride[i] = 1;
+            h5block[i] = 1;
+            h5count[i] = parms->buf_size[i];
+            h5chunk[i] = parms->chk_size[i];
+        }
+
+        h5dset_space_id = H5Screate_simple(rank, h5dims, NULL);
+        VRFY((h5dset_space_id >= 0), "H5Screate_simple");
+
+        hrc = H5Sselect_hyperslab(h5dset_space_id, H5S_SELECT_SET,
+                    h5start, h5stride, h5count, h5block); 
+        VRFY((hrc >= 0), "H5Sselect_hyperslab");
+
+        /* Create the memory dataspace that corresponds to the xfer buffer */
+        h5mem_space_id = H5Screate_simple(rank, h5count, NULL);
+        VRFY((h5mem_space_id >= 0), "H5Screate_simple");
+
+        /* Create the dataset transfer property list */
+        h5dxpl = H5Pcreate(H5P_DATASET_XFER);
+        if (h5dxpl < 0) {
+            fprintf(stderr, "HDF5 Property List Create failed\n");
+            GOTOERROR(FAIL);
+        }
+
+        break;        
+    } /* end switch */
+
+
+    /* create dataset */
+    switch (parms->io_type) {
+        case POSIXIO:
+        break;
+
+        case HDF5:
+        sprintf(dname, "Dataset_%ld", parms->num_bytes);
+        h5ds_id = H5Dopen2(fd->h5fd, dname, H5P_DEFAULT);
+        if (h5ds_id < 0) {
+            fprintf(stderr, "HDF5 Dataset open failed\n");
+            GOTOERROR(FAIL);
+        }
+
+        break;
+
+    } /* end switch */
+
+    /* Start "raw data" read timer */
+    set_time(res->timers, HDF5_RAW_READ_FIXED_DIMS, START);
+    hrc = dset_read(rank-1, fd, parms, buffer);
+
+    if (hrc < 0) {
+        fprintf(stderr, "Error in dataset read\n");
+        GOTOERROR(FAIL);
+    }
+
+    /* Stop "raw data" read timer */
+    set_time(res->timers, HDF5_RAW_READ_FIXED_DIMS, STOP);
+
+    /* Calculate read time */
+
+    /* Close dataset. Only HDF5 needs to do an explicit close. */
+    if (parms->io_type == HDF5) {
+        hrc = H5Dclose(h5ds_id);
+
+        if (hrc < 0) {
+        fprintf(stderr, "HDF5 Dataset Close failed\n");
+        GOTOERROR(FAIL);
+        }
+
+        h5ds_id = -1;
+    } /* end if */
+
+done:
+
+    /* release HDF5 objects */
+    if (h5dset_space_id != -1) {
+    hrc = H5Sclose(h5dset_space_id);
+    if (hrc < 0){
+        fprintf(stderr, "HDF5 Dataset Space Close failed\n");
+        ret_code = FAIL;
+    } else {
+        h5dset_space_id = -1;
+    }
+    }
+
+    if (h5mem_space_id != -1) {
+    hrc = H5Sclose(h5mem_space_id);
+    if (hrc < 0) {
+        fprintf(stderr, "HDF5 Memory Space Close failed\n");
+        ret_code = FAIL;
+    } else {
+        h5mem_space_id = -1;
+    }
+    }
+
+    if (h5dxpl != -1) {
+    hrc = H5Pclose(h5dxpl);
+    if (hrc < 0) {
+        fprintf(stderr, "HDF5 Dataset Transfer Property List Close failed\n");
+        ret_code = FAIL;
+    } else {
+        h5dxpl = -1;
+    }
+    }
+
+    return ret_code;
+}
+
+/*
+ * Function:        dset_read
+ * Purpose:         Read buffer into the dataset.
+ * Return:          SUCCESS or FAIL
+ * Programmer:      Christian Chilan, April, 2008
+ * Modifications:
+ */
+
+static herr_t dset_read(int local_dim, file_descr *fd, parameters *parms, void *buffer)
+{
+    int cur_dim = order[local_dim]-1;
+    int         ret_code = SUCCESS;
+    long i,j;
+    herr_t hrc;
+
+    /* iterate on the current dimension */ 
+    for (i=0; i < parms->dset_size[cur_dim]; i += parms->buf_size[cur_dim]){
+
+        h5offset[cur_dim] = offset[cur_dim] = i;
+        
+        /* if traverse in order array is incomplete, recurse */     
+        if (local_dim > 0){
+
+            ret_code = dset_read(local_dim-1, fd, parms, buffer);
+
+        /* otherwise, write buffer into dataset */
+        }else{
+
+            switch (parms->io_type) {
+
+            case POSIXIO:
+                for (j=0; j<parms->rank; j++) {
+                   buf_offset[j] = 0;
+                }
+                buf_p = (unsigned char*)buffer;
+                buf2_p = (unsigned char*)buffer2;
+                posix_buffer_read(0, fd, parms, buffer);
+                break;
+
+            case HDF5:
+                hrc = H5Soffset_simple(h5dset_space_id, h5offset);
+                VRFY((hrc >= 0), "H5Soffset_simple");
+                /* Read the buffer out */
+                hrc = H5Dread(h5ds_id, ELMT_H5_TYPE, h5mem_space_id,
+                    h5dset_space_id, h5dxpl, buffer);
+                VRFY((hrc >= 0), "H5Dread");
+#if 0 
+                for (j=0; j<linear_buf_size; j++) {
+                     buf_p = (unsigned char*)buffer;
+                     if (buf_p[j]!=buffer2[j])
+                        printf("Inconsistent data in %d\n", j);
+                }
+#endif
+                break;
+            } /* switch (parms->io_type) */
+        }
+    }
+done:
+    return ret_code;
+}
+
+/*
+ * Function:        posix_buffer_read
+ * Purpose:         Read buffer into the POSIX file considering contiguity.
+ * Return:          SUCCESS or FAIL
+ * Programmer:      Christian Chilan, April, 2008
+ * Modifications:
+ */
+
+static herr_t posix_buffer_read(int local_dim, file_descr *fd, parameters *parms, void *buffer)
+{
+    int dtype_size = 1;
+    int         ret_code = SUCCESS;
+    long i;
+    size_t d_offset;
+    size_t linear_dset_offset = 0;
+    int j, rc;
+
+    /* if local dimension is not contiguous, recurse */
+    if (local_dim < parms->rank-1 && local_dim != cont_dim) {
+
+        for (i=0; i < parms->buf_size[local_dim]; i += dtype_size) {
+            buf_offset[local_dim] = i;
+            ret_code = posix_buffer_read(local_dim+1, fd, parms, buffer);
+            if (local_dim+1==cont_dim)
+                break;
+        }
+    /* otherwise, perform contiguous POSIX access */
+    } else {
+
+        buf_offset[local_dim] = 0;
+        /* determine offset in buffer */
+        for (i=0; i<parms->rank; i++){
+            d_offset=1;
+
+            for (j=i+1; j<parms->rank; j++)
+                d_offset *= parms->dset_size[j];
+
+            linear_dset_offset += (offset[i]+buf_offset[i])*d_offset;
+        }
+
+        /* only care if seek returns error */
+        rc = POSIXSEEK(fd->posixfd, linear_dset_offset) < 0 ? -1 : 0;
+        VRFY((rc==0), "POSIXSEEK");
+        /* check if all bytes are read */
+        rc = ((ssize_t)cont_size ==
+             POSIXREAD(fd->posixfd, buf_p, cont_size));
+        VRFY((rc != 0), "POSIXREAD");
+#if 0 
+        for (j=0; j<cont_size; j++) {
+            if (buf_p[j]!=buf2_p[j])
+                printf("Inconsistent data in %d\n", j);
+        }
+        buf2_p += cont_size;
+#endif
+
+        /* Advance location in buffer */
+        buf_p += cont_size;
+
+    }
+done:
+    return ret_code;
+}
+
+
+/*
+ * Function:    do_fopen
+ * Purpose:     Open the specified file.
+ * Return:      SUCCESS or FAIL
+ * Programmer:  Albert Cheng, Bill Wendling, 2001/12/13
+ * Modifications: Support for file drivers, Christian Chilan, April, 2008
+ */
+    static herr_t
+do_fopen(parameters *param, char *fname, file_descr *fd /*out*/, int flags)
+{
+    int ret_code = SUCCESS;
+
+    switch (param->io_type) {
+    case POSIXIO:
+        if (flags & (SIO_CREATE | SIO_WRITE))
+            fd->posixfd = POSIXCREATE(fname);
+        else
+            fd->posixfd = POSIXOPEN(fname, O_RDONLY);
+
+        if (fd->posixfd < 0 ) {
+            fprintf(stderr, "POSIX File Open failed(%s)\n", fname);
+            GOTOERROR(FAIL);
+        }
+
+        break;
+
+    case HDF5:
+
+        fapl = set_vfd(param);
+
+        if (fapl < 0) {
+            fprintf(stderr, "HDF5 Property List Create failed\n");
+            GOTOERROR(FAIL);
+        }
+
+        /* create the parallel file */
+        if (flags & (SIO_CREATE | SIO_WRITE)) {
+            fd->h5fd = H5Fcreate(fname, H5F_ACC_TRUNC, H5P_DEFAULT, fapl);
+        } else {
+            fd->h5fd = H5Fopen(fname, H5F_ACC_RDONLY, fapl);
+        }
+
+
+        if (fd->h5fd < 0) {
+            fprintf(stderr, "HDF5 File Create failed(%s)\n", fname);
+            GOTOERROR(FAIL);
+        }
+        break;
+    } 
+
+done:
+    return ret_code;
+}
+
+/*
+ * Function:    set_vfd 
+ * Purpose:     Sets file driver. 
+ * Return:      SUCCESS or FAIL
+ * Programmer:  Christian Chilan, April, 2008 
+ * Modifications: 
+ */
+
+hid_t
+set_vfd(parameters *param)
+{
+    hid_t fapl = -1;
+    vfdtype  vfd;
+
+    vfd = param->vfd;
+
+    if ((fapl=H5Pcreate(H5P_FILE_ACCESS))<0) return -1;
+
+    if (vfd == sec2) {
+        /* Unix read() and write() system calls */
+        if (H5Pset_fapl_sec2(fapl)<0) return -1;
+    } else if (vfd == stdio) {
+        /* Standard C fread() and fwrite() system calls */
+        if (H5Pset_fapl_stdio(fapl)<0) return -1;
+    } else if (vfd == core) {
+        /* In-core temporary file with 1MB increment */
+        if (H5Pset_fapl_core(fapl, (size_t)1024*1024, TRUE)<0) return -1;
+    } else if (vfd == split) {
+        /* Split meta data and raw data each using default driver */
+        if (H5Pset_fapl_split(fapl,
+                              "-m.h5", H5P_DEFAULT,
+                              "-r.h5", H5P_DEFAULT)<0)
+            return -1;
+    } else if (vfd == multi) {
+        /* Multi-file driver, general case of the split driver */
+        H5FD_mem_t memb_map[H5FD_MEM_NTYPES];
+        hid_t memb_fapl[H5FD_MEM_NTYPES];
+        const char *memb_name[H5FD_MEM_NTYPES];
+        char sv[H5FD_MEM_NTYPES][1024];
+        haddr_t memb_addr[H5FD_MEM_NTYPES];
+        H5FD_mem_t      mt;
+
+        HDmemset(memb_map, 0, sizeof memb_map);
+        HDmemset(memb_fapl, 0, sizeof memb_fapl);
+        HDmemset(memb_name, 0, sizeof memb_name);
+        HDmemset(memb_addr, 0, sizeof memb_addr);
+
+        assert(HDstrlen(multi_letters)==H5FD_MEM_NTYPES);
+        for (mt=H5FD_MEM_DEFAULT; mt<H5FD_MEM_NTYPES; H5_INC_ENUM(H5FD_mem_t,mt)) {
+            memb_fapl[mt] = H5P_DEFAULT;
+            sprintf(sv[mt], "%%s-%c.h5", multi_letters[mt]);
+            memb_name[mt] = sv[mt];
+            memb_addr[mt] = MAX(mt-1,0)*(HADDR_MAX/10);
+        }
+
+        if (H5Pset_fapl_multi(fapl, memb_map, memb_fapl, memb_name,
+                              memb_addr, FALSE)<0) {
+            return -1;
+        }
+    } else if (vfd == family) {
+        hsize_t fam_size = 1*1024*1024; /*100 MB*/
+
+        /* Family of files, each 1MB and using the default driver */
+        /* if ((val=HDstrtok(NULL, " \t\n\r")))
+            fam_size = (hsize_t)(HDstrtod(val, NULL) * 1024*1024); */
+        if (H5Pset_fapl_family(fapl, fam_size, H5P_DEFAULT)<0)
+            return -1;
+    } else if (vfd == direct) {
+#ifdef H5_HAVE_DIRECT
+        /* Linux direct read() and write() system calls.  Set memory boundary, file block size,
+         * and copy buffer size to the default values. */
+        if (H5Pset_fapl_direct(fapl, 1024, 4096, 8*4096)<0) return -1;
+#endif
+    } else {
+        /* Unknown driver */
+        return -1;
+    }
+
+    return fapl;
+}
+
+/*
+ * Function:    do_fclose
+ * Purpose:     Close the specified file descriptor.
+ * Return:      SUCCESS or FAIL
+ * Programmer:  Albert Cheng, Bill Wendling, 2001/12/13
+ * Modifications:
+ */
+    static herr_t
+do_fclose(iotype iot, file_descr *fd /*out*/)
+{
+    herr_t ret_code = SUCCESS, hrc;
+    int  rc = 0;
+
+    switch (iot) {
+    case POSIXIO:
+        rc = POSIXCLOSE(fd->posixfd);
+
+        if (rc != 0){
+        fprintf(stderr, "POSIX File Close failed\n");
+        GOTOERROR(FAIL);
+        }
+
+        fd->posixfd = -1;
+        break;
+
+    case HDF5:
+        hrc = H5Fclose(fd->h5fd);
+
+        if (hrc < 0) {
+        fprintf(stderr, "HDF5 File Close failed\n");
+        GOTOERROR(FAIL);
+        }
+
+        fd->h5fd = -1;
+        break;
+    }
+
+done:
+    return ret_code;
+}
+
+
+/*
+ * Function:    do_cleanupfile
+ * Purpose:     Cleanup temporary file unless HDF5_NOCLEANUP is set.
+ * Return:      void
+ * Programmer:  Albert Cheng 2001/12/12
+ * Modifications: Support for file drivers. Christian Chilan, April, 2008
+ */
+    static void
+do_cleanupfile(iotype iot, char *filename)
+{
+    char        temp[2048];
+    int         j;
+    hid_t       driver;
+
+    if (clean_file_g == -1)
+    clean_file_g = (getenv("HDF5_NOCLEANUP")==NULL) ? 1 : 0;
+
+    if (clean_file_g){
+
+     switch (iot) {
+    case POSIXIO:
+          HDremove(filename);
+        break;
+
+    case HDF5:
+           driver = H5Pget_driver(fapl);
+
+            if (driver == H5FD_FAMILY) {
+                for (j = 0; /*void*/; j++) {
+                    HDsnprintf(temp, sizeof temp, filename, j);
+
+                    if (HDaccess(temp, F_OK) < 0)
+                        break;
+
+                    HDremove(temp);
+                }
+            } else if (driver == H5FD_CORE) {
+                hbool_t backing;        /* Whether the core file has backing store */
+
+                H5Pget_fapl_core(fapl,NULL,&backing);
+
+                /* If the file was stored to disk with bacing store, remove it */
+                if(backing)
+                    HDremove(filename);
+
+            } else if (driver == H5FD_MULTI) {
+                H5FD_mem_t mt;
+                assert(HDstrlen(multi_letters)==H5FD_MEM_NTYPES);
+
+                for (mt = H5FD_MEM_DEFAULT; mt < H5FD_MEM_NTYPES; H5_INC_ENUM(H5FD_mem_t,mt)) {
+                    HDsnprintf(temp, sizeof temp, "%s-%c.h5",
+                               filename, multi_letters[mt]);
+                    HDremove(temp); /*don't care if it fails*/
+                }
+            } else {
+                HDremove(filename);
+            }
+            H5Pclose(fapl);
+            break;
+      }   
+}
+}
+
+#ifdef H5_HAVE_GPFS
+
+/* Descriptions here come from the IBM GPFS Manual */
+
+/*
+ * Function:    gpfs_access_range
+ * Purpose:     Declares an access range within a file for an
+ *              application.
+ *
+ *              The application will access file offsets within the given
+ *              range, and will not access offsets outside the range.
+ *              Violating this hint may produce worse performance than if
+ *              no hint was specified.
+ *
+ *              This hint is useful in situations where a file is
+ *              partitioned coarsely among several nodes. If the ranges
+ *              do not overlap, each node can specify which range of the
+ *              file it will access, with a performance improvement in
+ *              some cases, such as for sequential writing within a
+ *              range.
+ *
+ *              Subsequent GPFS_ACCESS_RANGE hints will replace a hint
+ *              passed earlier.
+ *
+ *                  START    - The start of the access range offset, in
+ *                             bytes, from the beginning of the file
+ *                  LENGTH   - Length of the access range. 0 indicates to
+ *                             the end of the file
+ *                  IS_WRITE - 0 indicates READ access, 1 indicates WRITE access
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+    static void
+gpfs_access_range(int handle, off_t start, off_t length, int is_write)
+{
+    struct {
+    gpfsFcntlHeader_t hdr;
+    gpfsAccessRange_t access;
+    } access_range;
+
+    access_range.hdr.totalLength = sizeof(access_range);
+    access_range.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+    access_range.hdr.fcntlReserved = 0;
+    access_range.access.structLen = sizeof(gpfsAccessRange_t);
+    access_range.access.structType = GPFS_ACCESS_RANGE;
+    access_range.access.start = start;
+    access_range.access.length = length;
+    access_range.access.isWrite = is_write;
+
+    if (gpfs_fcntl(handle, &access_range) != 0) {
+    fprintf(stderr,
+        "gpfs_fcntl DS start directive failed. errno=%d errorOffset=%d\n",
+        errno, access_range.hdr.errorOffset);
+    exit(EXIT_FAILURE);
+    }
+}
+
+/*
+ * Function:    gpfs_free_range
+ * Purpose:     Undeclares an access range within a file for an
+ *              application.
+ *
+ *              The application will no longer access file offsets within
+ *              the given range. GPFS flushes the data at the file
+ *              offsets and removes it from the cache.
+ *
+ *              Multi-node applications that have finished one phase of
+ *              their computation may wish to use this hint before the
+ *              file is accessed in a conflicting mode from another node
+ *              in a later phase. The potential performance benefit is
+ *              that GPFS can avoid later synchronous cache consistency
+ *              operations.
+ *
+ *                  START  - The start of the access range offset, in
+ *                           bytes from the beginning of the file.
+ *                  LENGTH - Length of the access range. 0 indicates to
+ *                           the end of the file.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+    static void
+gpfs_free_range(int handle, off_t start, off_t length)
+{
+    struct {
+    gpfsFcntlHeader_t hdr;
+    gpfsFreeRange_t range;
+    } free_range;
+
+    /* Issue the invalidate hint */
+    free_range.hdr.totalLength = sizeof(free_range);
+    free_range.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+    free_range.hdr.fcntlReserved = 0;
+    free_range.range.structLen = sizeof(gpfsFreeRange_t);
+    free_range.range.structType = GPFS_FREE_RANGE;
+    free_range.range.start = start;
+    free_range.range.length = length;
+
+    if (gpfs_fcntl(handle, &free_range) != 0) {
+    fprintf(stderr,
+        "gpfs_fcntl free range failed for range %d:%d. errno=%d errorOffset=%d\n",
+        start, length, errno, free_range.hdr.errorOffset);
+    exit(EXIT_FAILURE);
+    }
+}
+
+/*
+ * Function:    gpfs_clear_file_cache
+ * Purpose:     Indicates file access in the near future is not expected.
+ *
+ *              The application does not expect to make any further
+ *              accesses to the file in the near future, so GPFS removes
+ *              any data or metadata pertaining to the file from its
+ *              cache.
+ *
+ *              Multi-node applications that have finished one phase of
+ *              their computation may wish to use this hint before the
+ *              file is accessed in a conflicting mode from another node
+ *              in a later phase. The potential performance benefit is
+ *              that GPFS can avoid later synchronous cache consistency
+ *              operations.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+    static void
+gpfs_clear_file_cache(int handle)
+{
+    struct {
+    gpfsFcntlHeader_t hdr;
+    gpfsClearFileCache_t clear;
+    } clear_cache;
+
+    clear_cache.hdr.totalLength = sizeof(clear_cache);
+    clear_cache.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+    clear_cache.hdr.fcntlReserved = 0;
+    clear_cache.clear.structLen = sizeof(gpfsClearFileCache_t);
+    clear_cache.clear.structType = GPFS_CLEAR_FILE_CACHE;
+
+    if (gpfs_fcntl(handle, &clear_cache) != 0) {
+    fprintf(stderr,
+        "gpfs_fcntl clear file cache directive failed. errno=%d errorOffset=%d\n",
+        errno, clear_cache.hdr.errorOffset);
+    exit(EXIT_FAILURE);
+    }
+}
+
+/*
+ * Function:    gpfs_cancel_hints
+ * Purpose:     Indicates to remove any hints against the open file
+ *              handle.
+ *
+ *              GPFS removes any hints that may have been issued against
+ *              this open file handle:
+ *
+ *                  - The hint status of the file is restored ot what it
+ *                    would have been immediately after being opened, but
+ *                    does not affect the contents of the GPFS file
+ *                    cache. Cancelling an earlier hint that resulted in
+ *                    data being removed from the GPFS file cache does
+ *                    not bring that data back int othe cache; data
+ *                    re-enters the cache only pon access by the
+ *                    application or by user-driven or automatic
+ *                    prefetching.
+ *                  - Only the GPFS_MULTIPLE_ACCESS_RANGE hint has a
+ *                    state that might be removed by the
+ *                    GPFS_CANCEL_HINTS directive.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+    static void
+gpfs_cancel_hints(int handle)
+{
+    struct {
+    gpfsFcntlHeader_t hdr;
+    gpfsCancelHints_t cancel;
+    } cancel_hints;
+
+    cancel_hints.hdr.totalLength = sizeof(cancel_hints);
+    cancel_hints.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+    cancel_hints.hdr.fcntlReserved = 0;
+    cancel_hints.cancel.structLen = sizeof(gpfsCancelHints_t);
+    cancel_hints.cancel.structType = GPFS_CANCEL_HINTS;
+
+    if (gpfs_fcntl(handle, &cancel_hints) != 0) {
+    fprintf(stderr,
+        "gpfs_fcntl cancel hints directive failed. errno=%d errorOffset=%d\n",
+        errno, cancel_hints.hdr.errorOffset);
+    exit(EXIT_FAILURE);
+    }
+}
+
+/*
+ * Function:    gpfs_start_data_shipping
+ * Purpose:     Initiates data shipping mode.
+ *
+ *              Once all participating threads have issued this directive
+ *              for a file, GPFS enters a mode where it logically
+ *              partitions the blocks of the file among a group of agent
+ *              nodes. The agents are those nodes on which one or more
+ *              threads have issued the GPFS_DATA_SHIP_START directive.
+ *              Each thread that has issued a GPFS_DATA_SHIP_START
+ *              directive and the associated agent nodes are referred to
+ *              as the data shipping collective.
+ *
+ *              The second parameter is the total number of open
+ *              instances on all nodes that will be operating on the
+ *              file. Must be called for every such instance with the
+ *              same value of NUM_INSTS.
+ *
+ *                  NUM_INSTS - The number of open file instances, on all
+ *                              nodes, collaborating to operate on the file
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 28. May 2002
+ * Modifications:
+ */
+    static void
+gpfs_start_data_shipping(int handle, int num_insts)
+{
+    struct {
+    gpfsFcntlHeader_t hdr;
+    gpfsDataShipStart_t start;
+    } ds_start;
+
+    ds_start.hdr.totalLength = sizeof(ds_start);
+    ds_start.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+    ds_start.hdr.fcntlReserved = 0;
+    ds_start.start.structLen = sizeof(gpfsDataShipStart_t);
+    ds_start.start.structType = GPFS_DATA_SHIP_START;
+    ds_start.start.numInstances = num_insts;
+    ds_start.start.reserved = 0;
+
+    if (gpfs_fcntl(handle, &ds_start) != 0) {
+    fprintf(stderr,
+        "gpfs_fcntl DS start directive failed. errno=%d errorOffset=%d\n",
+        errno, ds_start.hdr.errorOffset);
+    exit(EXIT_FAILURE);
+    }
+}
+
+/*
+ * Function:    gpfs_start_data_ship_map
+ * Purpose:     Indicates which agent nodes are to be used for data
+ *              shipping. GPFS recognizes which agent nodes to use for
+ *              data shipping.
+ *
+ *                  PARTITION_SIZE - The number of contiguous bytes per
+ *                                   server. This value must be a
+ *                                   multiple of the number of bytes in a
+ *                                   single file system block
+ *                  AGENT_COUNT    - The number of entries in the
+ *                                   agentNodeNumber array
+ *                  AGENT_NODE_NUM - The data ship agent node numbers as
+ *                                   listed in the SDT or the global ODM
+ *
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 10. Jul 2002
+ * Modifications:
+ */
+    static void
+gpfs_start_data_ship_map(int handle, int partition_size, int agent_count,
+    int *agent_node_num)
+{
+    int i;
+    struct {
+    gpfsFcntlHeader_t hdr;
+    gpfsDataShipMap_t map;
+    } ds_map;
+
+    ds_map.hdr.totalLength = sizeof(ds_map);
+    ds_map.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+    ds_map.hdr.fcntlReserved = 0;
+    ds_map.map.structLen = sizeof(gpfsDataShipMap_t);
+    ds_map.map.structType = GPFS_DATA_SHIP_MAP;
+    ds_map.map.partitionSize = partition_size;
+    ds_map.map.agentCount = agent_count;
+
+    for (i = 0; i < agent_count; ++i)
+    ds_map.map.agentNodeNumber[i] = agent_node_num[i];
+
+    if (gpfs_fcntl(handle, &ds_map) != 0) {
+    fprintf(stderr,
+        "gpfs_fcntl DS map directive failed. errno=%d errorOffset=%d\n",
+        errno, ds_map.hdr.errorOffset);
+    exit(EXIT_FAILURE);
+    }
+}
+
+/*
+ * Function:    gpfs_stop_data_shipping
+ * Purpose:     Takes a file out of the data shipping mode.
+ *
+ *              - GPFS waits for all threads that issued the
+ *                GPFS_DATA_SHIP_START directive to issue this directive,
+ *                then flushes the dirty file data to disk.
+ *
+ *              - While a gpfs_cntl() call is blocked for other threads,
+ *                the call can be interrupted by any signal. If a signal
+ *                is delivered to any of the waiting calls, all waiting
+ *                calls on every node will be interrupted and will return
+ *                EINTR. GPFS will not cancel data shipping mode if such
+ *                a signal occurs. It is the responsibility of the
+ *                application to mask off any signals that might normally
+ *                occur while waiting for another node in the data
+ *                shipping collective. Several libraries use SIGALRM; the
+ *                thread that makes the gpfs_fcntl() call should use
+ *                sigthreadmask to mask off delivery of this signal while
+ *                inside the call.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 28. May 2002
+ * Modifications:
+ */
+    static void
+gpfs_stop_data_shipping(int handle)
+{
+    struct {
+    gpfsFcntlHeader_t hdr;
+    gpfsDataShipStop_t stop;
+    } ds_stop;
+
+    ds_stop.hdr.totalLength = sizeof(ds_stop);
+    ds_stop.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+    ds_stop.hdr.fcntlReserved = 0;
+    ds_stop.stop.structLen = sizeof(ds_stop.stop);
+    ds_stop.stop.structType = GPFS_DATA_SHIP_STOP;
+
+    if (gpfs_fcntl(handle, &ds_stop) != 0)
+    fprintf(stderr,
+        "gpfs_fcntl DS stop directive failed. errno=%d errorOffset=%d\n",
+        errno, ds_stop.hdr.errorOffset);
+}
+
+/*
+ * Function:    gpfs_invalidate_file_cache
+ * Purpose:     Invalidate all cached data held on behalf of a file on
+ *              this node.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 03. June 2002
+ * Modifications:
+ */
+    static void
+gpfs_invalidate_file_cache(const char *filename)
+{
+    int handle;
+    struct {
+    gpfsFcntlHeader_t hdr;
+    gpfsClearFileCache_t inv;
+    } inv_cache_hint;
+
+    /* Open the file.  If the open fails, the file cannot be cached. */
+    handle = open(filename, O_RDONLY, 0);
+
+    if (handle == -1)
+    return;
+
+    /* Issue the invalidate hint */
+    inv_cache_hint.hdr.totalLength = sizeof(inv_cache_hint);
+    inv_cache_hint.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION;
+    inv_cache_hint.hdr.fcntlReserved = 0;
+    inv_cache_hint.inv.structLen = sizeof(gpfsClearFileCache_t);
+    inv_cache_hint.inv.structType = GPFS_CLEAR_FILE_CACHE;
+
+    if (gpfs_fcntl(handle, &inv_cache_hint) != 0) {
+    fprintf(stderr,
+        "gpfs_fcntl clear cache hint failed for file '%s'.",
+        filename);
+    fprintf(stderr, " errno=%d errorOffset=%d\n",
+        errno, inv_cache_hint.hdr.errorOffset);
+    exit(1);
+    }
+
+    /* Close the file */
+    if (close(handle) == -1) {
+    fprintf(stderr,
+        "could not close file '%s' after flushing file cache, ",
+        filename);
+    fprintf(stderr, "errno=%d\n", errno);
+    exit(1);
+    }
+}
+
+#else
+
+/* turn the stubs off since some compilers are warning they are not used */
+#if 0
+/* H5_HAVE_GPFS isn't defined...stub functions */
+
+    static void
+gpfs_access_range(int UNUSED handle, off_t UNUSED start, off_t UNUSED length,
+    int UNUSED is_write)
+{
+    return;
+}
+
+    static void
+gpfs_free_range(int UNUSED handle, off_t UNUSED start, off_t UNUSED length)
+{
+    return;
+}
+
+    static void
+gpfs_clear_file_cache(int UNUSED handle)
+{
+    return;
+}
+
+    static void
+gpfs_cancel_hints(int UNUSED handle)
+{
+    return;
+}
+
+    static void
+gpfs_start_data_shipping(int UNUSED handle, int UNUSED num_insts)
+{
+    return;
+}
+
+    static void
+gpfs_stop_data_shipping(int UNUSED handle)
+{
+    return;
+}
+
+    static void
+gpfs_start_data_ship_map(int UNUSED handle, int UNUSED partition_size,
+    int UNUSED agent_count, int UNUSED *agent_node_num)
+{
+    return;
+}
+
+    static void
+gpfs_invalidate_file_cache(const char UNUSED *filename)
+{
+    return;
+}
+
+#endif  /* 0 */
+
+#endif  /* H5_HAVE_GPFS */
+
+
diff --git a/perform/sio_perf.c b/perform/sio_perf.c
new file mode 100644
index 0000000..9e5ed23
--- /dev/null
+++ b/perform/sio_perf.c
@@ -0,0 +1,1446 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by the Board of Trustees of the University of Illinois.         *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have     *
+ * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Serial HDF5 Performance Testing Code
+ * --------------------------------------
+ *
+ * Portable code to test performance on the different platforms we support.
+ * This is what the report should look like:
+ *
+ *  nprocs = Max#Procs
+ *      IO API = POSIXIO
+ *          # Files = 1, # of dsets = 1000, Elements per dset = 37000
+ *              Write Results = x MB/s
+ *              Read Results = x MB/s
+ *          # Files = 1, # of dsets = 3000, Elements per dset = 37000
+ *              Write Results = x MB/s
+ *              Read Results = x MB/s
+ *
+ *          . . .
+ *
+ *
+ *      IO API = HDF5
+ *          # Files = 1, # of dsets = 1000, Elements per dset = 37000
+ *              Write Results = x MB/s
+ *              Read Results = x MB/s
+ *          # Files = 1, # of dsets = 3000, Elements per dset = 37000
+ *              Write Results = x MB/s
+ *              Read Results = x MB/s
+ *
+ *          . . .
+ *
+ *
+ *      . . .
+ *
+ */
+
+/* system header files */
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "hdf5.h"
+
+
+/* our header files */
+#include "sio_perf.h"
+
+/* useful macros */
+#define TAB_SPACE           4
+
+#define ONE_KB              1024
+#define ONE_MB              (ONE_KB * ONE_KB)
+#define ONE_GB              (ONE_MB * ONE_KB)
+
+#define SIO_POSIX           0x1
+#define SIO_HDF5            0x4
+
+/* report 0.0 in case t is zero too */
+#define MB_PER_SEC(bytes,t) (((t)==0.0) ? 0.0 : ((((double)bytes) / ONE_MB) / (t)))
+
+#ifndef TRUE
+#define TRUE    1
+#endif  /* TRUE */
+#ifndef FALSE
+#define FALSE   (!TRUE)
+#endif  /* FALSE */
+
+/* global variables */
+FILE       *output;             /* output file                          */
+int         sio_debug_level = 0;/* The debug level:
+                                 *   0 - Off
+                                 *   1 - Minimal
+                                 *   2 - Some more
+                                 *   3 - Maximal
+                                 *   4 - Maximal & then some
+                                 */
+
+/* local variables */
+static const char  *progname = "h5perf_serial";
+
+/*
+ * Command-line options: The user can specify short or long-named
+ * parameters. The long-named ones can be partially spelled. When
+ * adding more, make sure that they don't clash with each other.
+ */
+
+/*
+ * It seems that only the options that accept additional information
+ * such as dataset size (-e) require the colon next to it.
+ */
+#if 1
+static const char *s_opts = "a:A:B:c:Cd:D:e:F:ghi:Imno:p:P:r:stT:v:wx:X:";
+#else
+static const char *s_opts = "a:A:bB:c:Cd:D:e:F:ghi:Imno:p:P:r:stT:wx:X:";
+#endif  /* 1 */
+static struct long_options l_opts[] = {
+    { "align", require_arg, 'a' },
+    { "alig", require_arg, 'a' },
+    { "ali", require_arg, 'a' },
+    { "al", require_arg, 'a' },
+    { "api", require_arg, 'A' },
+    { "ap", require_arg, 'A' },
+#if 0
+    /* a sighting of the elusive binary option */
+    { "binary", no_arg, 'b' },
+    { "binar", no_arg, 'b' },
+    { "bina", no_arg, 'b' },
+    { "bin", no_arg, 'b' },
+    { "bi", no_arg, 'b' },
+#endif  /* 0 */
+    { "block-size", require_arg, 'B' },
+    { "block-siz", require_arg, 'B' },
+    { "block-si", require_arg, 'B' },
+    { "block-s", require_arg, 'B' },
+    { "block-", require_arg, 'B' },
+    { "block", require_arg, 'B' },
+    { "bloc", require_arg, 'B' },
+    { "blo", require_arg, 'B' },
+    { "bl", require_arg, 'B' },
+    { "chunk", no_arg, 'c' },
+    { "chun", no_arg, 'c' },
+    { "chu", no_arg, 'c' },
+    { "ch", no_arg, 'c' },
+    { "collective", no_arg, 'C' },
+    { "collectiv", no_arg, 'C' },
+    { "collecti", no_arg, 'C' },
+    { "collect", no_arg, 'C' },
+    { "collec", no_arg, 'C' },
+    { "colle", no_arg, 'C' },
+    { "coll", no_arg, 'C' },
+    { "col", no_arg, 'C' },
+    { "co", no_arg, 'C' },
+    { "debug", require_arg, 'D' },
+    { "debu", require_arg, 'D' },
+    { "deb", require_arg, 'D' },
+    { "de", require_arg, 'D' },
+    { "file-driver", require_arg, 'v' },
+    { "file-drive", require_arg, 'v' },
+    { "file-driv", require_arg, 'v' },
+    { "file-dri", require_arg, 'v' },
+    { "file-dr", require_arg, 'v' },
+    { "file-d", require_arg, 'v' },
+    { "file-", require_arg, 'v' },
+    { "file", require_arg, 'v' },
+    { "fil", require_arg, 'v' },
+    { "fi", require_arg, 'v' },
+    { "geometry", no_arg, 'g' },
+    { "geometr", no_arg, 'g' },
+    { "geomet", no_arg, 'g' },
+    { "geome", no_arg, 'g' },
+    { "geom", no_arg, 'g' },
+    { "geo", no_arg, 'g' },
+    { "ge", no_arg, 'g' },
+    { "help", no_arg, 'h' },
+    { "hel", no_arg, 'h' },
+    { "he", no_arg, 'h' },
+    { "interleaved", require_arg, 'I' },
+    { "interleave", require_arg, 'I' },
+    { "interleav", require_arg, 'I' },
+    { "interlea", require_arg, 'I' },
+    { "interle", require_arg, 'I' },
+    { "interl", require_arg, 'I' },
+    { "inter", require_arg, 'I' },
+    { "inte", require_arg, 'I' },
+    { "int", require_arg, 'I' },
+    { "in", require_arg, 'I' },
+    { "max-num-processes", require_arg, 'P' },
+    { "max-num-processe", require_arg, 'P' },
+    { "max-num-process", require_arg, 'P' },
+    { "max-num-proces", require_arg, 'P' },
+    { "max-num-proce", require_arg, 'P' },
+    { "max-num-proc", require_arg, 'P' },
+    { "max-num-pro", require_arg, 'P' },
+    { "max-num-pr", require_arg, 'P' },
+    { "max-num-p", require_arg, 'P' },
+    { "min-num-processes", require_arg, 'p' },
+    { "min-num-processe", require_arg, 'p' },
+    { "min-num-process", require_arg, 'p' },
+    { "min-num-proces", require_arg, 'p' },
+    { "min-num-proce", require_arg, 'p' },
+    { "min-num-proc", require_arg, 'p' },
+    { "min-num-pro", require_arg, 'p' },
+    { "min-num-pr", require_arg, 'p' },
+    { "min-num-p", require_arg, 'p' },
+    { "max-xfer-size", require_arg, 'X' },
+    { "max-xfer-siz", require_arg, 'X' },
+    { "max-xfer-si", require_arg, 'X' },
+    { "max-xfer-s", require_arg, 'X' },
+    { "max-xfer", require_arg, 'X' },
+    { "max-xfe", require_arg, 'X' },
+    { "max-xf", require_arg, 'X' },
+    { "max-x", require_arg, 'X' },
+    { "min-xfer-size", require_arg, 'x' },
+    { "min-xfer-siz", require_arg, 'x' },
+    { "min-xfer-si", require_arg, 'x' },
+    { "min-xfer-s", require_arg, 'x' },
+    { "min-xfer", require_arg, 'x' },
+    { "min-xfe", require_arg, 'x' },
+    { "min-xf", require_arg, 'x' },
+    { "min-x", require_arg, 'x' },
+    { "mpi-posix", no_arg, 'm' },
+    { "mpi-posi", no_arg, 'm' },
+    { "mpi-pos", no_arg, 'm' },
+    { "mpi-po", no_arg, 'm' },
+    { "mpi-p", no_arg, 'm' },
+    { "mpi-", no_arg, 'm' },
+    { "mpi", no_arg, 'm' },
+    { "mp", no_arg, 'm' },
+    { "num-bytes", require_arg, 'e' },
+    { "num-byte", require_arg, 'e' },
+    { "num-byt", require_arg, 'e' },
+    { "num-by", require_arg, 'e' },
+    { "num-b", require_arg, 'e' },
+    { "num-dsets", require_arg, 'd' },
+    { "num-dset", require_arg, 'd' },
+    { "num-dse", require_arg, 'd' },
+    { "num-ds", require_arg, 'd' },
+    { "num-d", require_arg, 'd' },
+    { "num-files", require_arg, 'F' },
+    { "num-file", require_arg, 'F' },
+    { "num-fil", require_arg, 'F' },
+    { "num-fi", require_arg, 'F' },
+    { "num-f", require_arg, 'F' },
+    { "num-iterations", require_arg, 'i' },
+    { "num-iteration", require_arg, 'i' },
+    { "num-iteratio", require_arg, 'i' },
+    { "num-iterati", require_arg, 'i' },
+    { "num-iterat", require_arg, 'i' },
+    { "num-itera", require_arg, 'i' },
+    { "num-iter", require_arg, 'i' },
+    { "num-ite", require_arg, 'i' },
+    { "num-it", require_arg, 'i' },
+    { "num-i", require_arg, 'i' },
+    { "order", require_arg, 'r' },
+    { "orde", require_arg, 'r' },
+    { "ord", require_arg, 'r' },
+    { "or", require_arg, 'r' },
+    { "output", require_arg, 'o' },
+    { "outpu", require_arg, 'o' },
+    { "outp", require_arg, 'o' },
+    { "out", require_arg, 'o' },
+    { "ou", require_arg, 'o' },
+    { "extendable", no_arg, 't' },
+    { "extendabl", no_arg, 't' },
+    { "extendab", no_arg, 't' },
+    { "extenda", no_arg, 't' },
+    { "extend", no_arg, 't' },
+    { "exten", no_arg, 't' },
+    { "exte", no_arg, 't' },
+    { "ext", no_arg, 't' },
+    { "ex", no_arg, 't' },
+    { "threshold", require_arg, 'T' },
+    { "threshol", require_arg, 'T' },
+    { "thresho", require_arg, 'T' },
+    { "thresh", require_arg, 'T' },
+    { "thres", require_arg, 'T' },
+    { "thre", require_arg, 'T' },
+    { "thr", require_arg, 'T' },
+    { "th", require_arg, 'T' },
+    { "write-only", require_arg, 'w' },
+    { "write-onl", require_arg, 'w' },
+    { "write-on", require_arg, 'w' },
+    { "write-o", require_arg, 'w' },
+    { "write", require_arg, 'w' },
+    { "writ", require_arg, 'w' },
+    { "wri", require_arg, 'w' },
+    { "wr", require_arg, 'w' },
+    { NULL, 0, '\0' }
+};
+
+struct options {
+    long io_types;              /* bitmask of which I/O types to test   */
+    const char *output_file;    /* file to print report to              */
+    long num_dsets;             /* number of datasets                   */
+    long num_files;             /* number of files                      */
+    off_t num_bpp;              /* number of bytes per proc per dset    */
+    int num_iters;              /* number of iterations                 */
+    off_t dset_size[MAX_DIMS];  /* Dataset size                           */
+    size_t buf_size[MAX_DIMS];  /* Buffer size                           */
+    size_t chk_size[MAX_DIMS];  /* Chunk size                           */
+    int order[MAX_DIMS];  /* Dimension access order                           */
+    int dset_rank;             /* Rank                   */
+    int buf_rank;             /* Rank                   */
+    int order_rank;             /* Rank                   */
+    int chk_rank;             /* Rank                   */
+    int print_times;       	/* print times as well as throughputs   */
+    int print_raw;         	/* print raw data throughput info       */
+    off_t h5_alignment;         /* alignment in HDF5 file               */
+    off_t h5_threshold;         /* threshold for alignment in HDF5 file */
+    int h5_use_chunks;     	/* Make HDF5 dataset chunked            */
+    int h5_write_only;        	/* Perform the write tests only         */
+    int h5_extendable;        	/* Perform the write tests only         */
+    unsigned h5_use_mpi_posix;  /* Use MPI-posix VFD for HDF5 I/O (instead of MPI-I/O VFD) */
+    int verify;        		/* Verify data correctness              */
+    vfdtype     vfd;            /* File driver */
+
+};
+
+typedef struct _minmax {
+    double min;
+    double max;
+    double sum;
+    int num;
+} minmax;
+
+/* local functions */
+static off_t parse_size_directive(const char *size);
+static struct options *parse_command_line(int argc, char *argv[]);
+static void run_test_loop(struct options *options);
+static int run_test(iotype iot, parameters parms, struct options *opts);
+static void output_all_info(minmax *mm, int count, int indent_level);
+static void get_minmax(minmax *mm, double val);
+static minmax accumulate_minmax_stuff(minmax *mm, int count);
+static void output_results(const struct options *options, const char *name,
+                           minmax *table, int table_size, off_t data_size);
+static void output_report(const char *fmt, ...);
+static void print_indent(register int indent);
+static void usage(const char *prog);
+static void report_parameters(struct options *opts);
+
+/*
+ * Function:    main
+ * Purpose:     Start things up.
+ * Return:      EXIT_SUCCESS or EXIT_FAILURE
+ * Programmer:  Bill Wendling, 30. October 2001
+ * Modifications:
+ */
+int
+main(int argc, char **argv)
+{
+    int ret;
+    int exit_value = EXIT_SUCCESS;
+    struct options *opts = NULL;
+
+    output = stdout;
+
+    opts = parse_command_line(argc, argv);
+
+    if (!opts) {
+        exit_value = EXIT_FAILURE;
+        goto finish;
+    }
+
+    if (opts->output_file) {
+        if ((output = fopen(opts->output_file, "w")) == NULL) {
+            fprintf(stderr, "%s: cannot open output file\n", progname);
+            perror(opts->output_file);
+            goto finish;
+        }
+    }
+
+    report_parameters(opts);
+
+    run_test_loop(opts);
+
+finish:
+    free(opts);
+    return exit_value;
+}
+
+/*
+ * Function:    run_test_loop
+ * Purpose:     Run the I/O tests. Write the results to OUTPUT.
+ *
+ *            - The slowest changing part of the test is the number of
+ *              processors to use. For each loop iteration, we divide that
+ *              number by 2 and rerun the test.
+ *
+ *            - The second slowest is what type of IO API to perform. We have
+ *              three choices: POSIXIO, and HDF5.
+ *
+ *            - Then we change the size of the buffer. This information is
+ *              inferred from the number of datasets to create and the number
+ *              of integers to put into each dataset. The backend code figures
+ *              this out.
+ *
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 30. October 2001
+ * Modifications:
+ *    Added 2D testing (Christian Chilan, 10. August 2005)
+ */
+static void
+run_test_loop(struct options *opts)
+{
+    parameters parms;
+    int i;
+    int doing_sio;      /* if this process is doing SIO */
+    size_t      buf_bytes;     
+    /* load options into parameter structure */
+    parms.num_files = opts->num_files;
+    parms.num_dsets = opts->num_dsets;
+    parms.num_iters = opts->num_iters;
+    parms.rank = opts->dset_rank;
+    parms.h5_align = opts->h5_alignment;
+    parms.h5_thresh = opts->h5_threshold;
+    parms.h5_use_chunks = opts->h5_use_chunks;
+    parms.h5_extendable = opts->h5_extendable;
+    parms.h5_write_only = opts->h5_write_only;
+    parms.h5_use_mpi_posix = opts->h5_use_mpi_posix;
+    parms.verify = opts->verify;
+    parms.vfd = opts->vfd;
+
+    /* load multidimensional options */
+    parms.num_bytes = 1;
+    buf_bytes = 1;
+    for (i=0; i<parms.rank; i++){
+        parms.buf_size[i] = opts->buf_size[i];
+        parms.dset_size[i] = opts->dset_size[i];
+        parms.chk_size[i] = opts->chk_size[i];
+        parms.order[i] = opts->order[i];
+        parms.num_bytes *= opts->dset_size[i];
+        buf_bytes *= opts->buf_size[i];
+    }
+
+    /* print size information */
+    output_report("Transfer Buffer Size (bytes): %d\n", buf_bytes);
+    output_report("File Size(MB): %.2f\n",((double)parms.num_bytes) / ONE_MB);
+
+    print_indent(0);
+    if (opts->io_types & SIO_POSIX)
+        run_test(POSIXIO, parms, opts);
+
+    print_indent(0);
+    if (opts->io_types & SIO_HDF5)
+        run_test(HDF5, parms, opts);
+}
+
+/*
+ * Function:    run_test
+ * Purpose:     Inner loop call to actually run the I/O test.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 18. December 2001
+ * Modifications:
+ */
+static int
+run_test(iotype iot, parameters parms, struct options *opts)
+{
+    results         res;
+    register int    i, ret_value = SUCCESS;
+    int             comm_size;
+    off_t           raw_size;
+    minmax         *write_sys_mm_table=NULL;
+    minmax         *write_mm_table=NULL;
+    minmax         *write_gross_mm_table=NULL;
+    minmax         *write_raw_mm_table=NULL;
+    minmax         *read_sys_mm_table=NULL;
+    minmax         *read_mm_table=NULL;
+    minmax         *read_gross_mm_table=NULL;
+    minmax         *read_raw_mm_table=NULL;
+    minmax          write_sys_mm = {0.0, 0.0, 0.0, 0};
+    minmax          write_mm = {0.0, 0.0, 0.0, 0};
+    minmax          write_gross_mm = {0.0, 0.0, 0.0, 0};
+    minmax          write_raw_mm = {0.0, 0.0, 0.0, 0};
+    minmax          read_sys_mm = {0.0, 0.0, 0.0, 0};
+    minmax          read_mm = {0.0, 0.0, 0.0, 0};
+    minmax          read_gross_mm = {0.0, 0.0, 0.0, 0};
+    minmax          read_raw_mm = {0.0, 0.0, 0.0, 0};
+
+    raw_size = (off_t)parms.num_bytes;
+    parms.io_type = iot;
+    print_indent(2);
+    output_report("IO API = ");
+
+    switch (iot) {
+        case POSIXIO:
+            output_report("POSIX\n");
+            break;
+        case HDF5:
+            output_report("HDF5\n");
+            break;
+    }
+
+    /* allocate space for tables minmax and that it is sufficient */
+    /* to initialize all elements to zeros by calloc.             */
+    write_sys_mm_table = calloc((size_t)parms.num_iters , sizeof(minmax));
+    write_mm_table = calloc((size_t)parms.num_iters , sizeof(minmax));
+    write_gross_mm_table = calloc((size_t)parms.num_iters , sizeof(minmax));
+    write_raw_mm_table = calloc((size_t)parms.num_iters , sizeof(minmax));
+
+    if (!parms.h5_write_only) {
+        read_sys_mm_table = calloc((size_t)parms.num_iters , sizeof(minmax));
+        read_mm_table = calloc((size_t)parms.num_iters , sizeof(minmax));
+        read_gross_mm_table = calloc((size_t)parms.num_iters , sizeof(minmax));
+        read_raw_mm_table = calloc((size_t)parms.num_iters , sizeof(minmax));
+    }
+
+    /* Do IO iteration times, collecting statistics each time */
+    for (i = 0; i < parms.num_iters; ++i) {
+        double t;
+        res = do_sio(parms);
+
+        /* gather all of the "sys write" times */
+        t = get_time(res.timers, HDF5_MPI_WRITE);
+        get_minmax(&write_sys_mm, t);
+
+        write_sys_mm_table[i] = write_sys_mm;
+
+        /* gather all of the "write" times */
+        t = get_time(res.timers, HDF5_FINE_WRITE_FIXED_DIMS);
+        get_minmax(&write_mm, t);
+
+        write_mm_table[i] = write_mm;
+
+        /* gather all of the "write" times from open to close */
+        t = get_time(res.timers, HDF5_GROSS_WRITE_FIXED_DIMS);
+        get_minmax(&write_gross_mm, t);
+
+        write_gross_mm_table[i] = write_gross_mm;
+
+        /* gather all of the raw "write" times */
+        t = get_time(res.timers, HDF5_RAW_WRITE_FIXED_DIMS);
+        get_minmax(&write_raw_mm, t);
+
+        write_raw_mm_table[i] = write_raw_mm;
+
+        if (!parms.h5_write_only) {
+            /* gather all of the "mpi read" times */
+            t = get_time(res.timers, HDF5_MPI_READ);
+            get_minmax(&read_sys_mm, t);
+
+            read_sys_mm_table[i] = read_sys_mm;
+
+            /* gather all of the "read" times */
+            t = get_time(res.timers, HDF5_FINE_READ_FIXED_DIMS);
+            get_minmax(&read_mm, t);
+
+            read_mm_table[i] = read_mm;
+
+            /* gather all of the "read" times from open to close */
+            t = get_time(res.timers, HDF5_GROSS_READ_FIXED_DIMS);
+            get_minmax(&read_gross_mm, t);
+
+            read_gross_mm_table[i] = read_gross_mm;
+
+            /* gather all of the raw "read" times */
+            t = get_time(res.timers, HDF5_RAW_READ_FIXED_DIMS);
+            get_minmax(&read_raw_mm, t);
+
+            read_raw_mm_table[i] = read_gross_mm;
+        }
+        sio_time_destroy(res.timers);
+    }
+
+    /*
+     * Show various statistics
+     */
+    /* Write statistics	*/
+    /* Print the raw data throughput if desired */
+    if (opts->print_raw) {
+        /* accumulate and output the max, min, and average "raw write" times */
+        if (sio_debug_level >= 3) {
+            /* output all of the times for all iterations */
+            print_indent(3);
+            output_report("Raw Data Write details:\n");
+            output_all_info(write_raw_mm_table, parms.num_iters, 4);
+        }
+
+        output_results(opts,"Raw Data Write",write_raw_mm_table,parms.num_iters,raw_size);
+    } /* end if */
+
+    /* show sys write statics */
+#if 0
+    if (sio_debug_level >= 3) {
+        /* output all of the times for all iterations */
+        print_indent(3);
+        output_report("MPI Write details:\n");
+        output_all_info(write_sys_mm_table, parms.num_iters, 4);
+    }
+#endif
+    /* We don't currently output the MPI write results */
+
+    /* accumulate and output the max, min, and average "write" times */
+    if (sio_debug_level >= 3) {
+        /* output all of the times for all iterations */
+        print_indent(3);
+        output_report("Write details:\n");
+        output_all_info(write_mm_table, parms.num_iters, 4);
+    }
+
+    output_results(opts,"Write",write_mm_table,parms.num_iters,raw_size);
+
+    /* accumulate and output the max, min, and average "gross write" times */
+    if (sio_debug_level >= 3) {
+        /* output all of the times for all iterations */
+        print_indent(3);
+        output_report("Write Open-Close details:\n");
+        output_all_info(write_gross_mm_table, parms.num_iters, 4);
+    }
+
+    output_results(opts,"Write Open-Close",write_gross_mm_table,parms.num_iters,raw_size);
+
+    if (!parms.h5_write_only) {
+        /* Read statistics	*/
+        /* Print the raw data throughput if desired */
+        if (opts->print_raw) {
+            /* accumulate and output the max, min, and average "raw read" times */
+            if (sio_debug_level >= 3) {
+                /* output all of the times for all iterations */
+                print_indent(3);
+                output_report("Raw Data Read details:\n");
+                output_all_info(read_raw_mm_table, parms.num_iters, 4);
+            }
+
+            output_results(opts, "Raw Data Read", read_raw_mm_table,
+                           parms.num_iters, raw_size);
+        } /* end if */
+
+        /* show mpi read statics */
+#if 0
+        if (sio_debug_level >= 3) {
+            /* output all of the times for all iterations */
+            print_indent(3);
+            output_report("MPI Read details:\n");
+            output_all_info(read_sys_mm_table, parms.num_iters, 4);
+        }
+#endif
+        /* We don't currently output the MPI read results */
+
+        /* accumulate and output the max, min, and average "read" times */
+        if (sio_debug_level >= 3) {
+            /* output all of the times for all iterations */
+            print_indent(3);
+            output_report("Read details:\n");
+            output_all_info(read_mm_table, parms.num_iters, 4);
+        }
+
+        output_results(opts, "Read", read_mm_table, parms.num_iters, raw_size);
+
+        /* accumulate and output the max, min, and average "gross read" times */
+        if (sio_debug_level >= 3) {
+            /* output all of the times for all iterations */
+            print_indent(3);
+            output_report("Read Open-Close details:\n");
+            output_all_info(read_gross_mm_table, parms.num_iters, 4);
+        }
+
+        output_results(opts, "Read Open-Close", read_gross_mm_table,
+                       parms.num_iters, raw_size);
+    }
+
+    /* clean up our mess */
+    free(write_sys_mm_table);
+    free(write_mm_table);
+    free(write_gross_mm_table);
+    free(write_raw_mm_table);
+
+    if (!parms.h5_write_only) {
+        free(read_sys_mm_table);
+        free(read_mm_table);
+        free(read_gross_mm_table);
+        free(read_raw_mm_table);
+    }
+
+    return ret_value;
+}
+
+/*
+ * Function:    output_all_info
+ * Purpose:
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 29. January 2002
+ * Modifications:
+ */
+static void
+output_all_info(minmax *mm, int count, int indent_level)
+{
+    int i;
+
+    for (i = 0; i < count; ++i) {
+        print_indent(indent_level);
+        output_report("Iteration %d:\n", i + 1);
+        print_indent(indent_level + 1);
+        output_report("Minimum Time: %.2fs\n", mm[i].min);
+        print_indent(indent_level + 1);
+        output_report("Maximum Time: %.2fs\n", mm[i].max);
+    }
+}
+
+/*
+ * Function:    get_minmax
+ * Purpose:     Gather all the min, max and total of val.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 21. December 2001
+ * Modifications:
+ *    Use MPI_Allreduce to do it. -akc, 2002/01/11
+ */
+
+static void
+get_minmax(minmax *mm, double val)
+{
+    mm->max = val;
+    mm->min = val;
+    mm->sum = val;
+}
+
+/*
+ * Function:    accumulate_minmax_stuff
+ * Purpose:     Accumulate the minimum, maximum, and average of the times
+ *              across all processes.
+ * Return:      TOTAL_MM - the total of all of these.
+ * Programmer:  Bill Wendling, 21. December 2001
+ * Modifications:
+ *              Changed to use seconds instead of MB/s - QAK, 5/9/02
+ */
+static minmax
+accumulate_minmax_stuff(minmax *mm, int count)
+{
+    int i;
+    minmax total_mm;
+
+    total_mm.sum = 0.0;
+    total_mm.max = -DBL_MAX;
+    total_mm.min = DBL_MAX;
+    total_mm.num = count;
+
+    for (i = 0; i < count; ++i) {
+        double m = mm[i].max;
+
+        total_mm.sum += m;
+
+        if (m < total_mm.min)
+            total_mm.min = m;
+
+        if (m > total_mm.max)
+            total_mm.max = m;
+    }
+
+    return total_mm;
+}
+
+
+/*
+ * Function:    output_results
+ * Purpose:     Print information about the time & bandwidth for a given
+ *                  minmax & # of iterations.
+ * Return:      Nothing
+ * Programmer:  Quincey Koziol, 9. May 2002
+ * Modifications:
+ */
+static void
+output_results(const struct options *opts, const char *name, minmax *table,
+    int table_size,off_t data_size)
+{
+    minmax          total_mm;
+
+    total_mm = accumulate_minmax_stuff(table, table_size);
+
+    print_indent(3);
+    output_report("%s (%d iteration(s)):\n", name,table_size);
+
+    /* Note: The maximum throughput uses the minimum amount of time & vice versa */
+
+    print_indent(4);
+    output_report("Maximum Throughput: %6.2f MB/s", MB_PER_SEC(data_size,total_mm.min));
+    if(opts->print_times)
+        output_report(" (%7.3f s)\n", total_mm.min);
+    else
+        output_report("\n");
+
+    print_indent(4);
+    output_report("Average Throughput: %6.2f MB/s",
+                  MB_PER_SEC(data_size,total_mm.sum / total_mm.num));
+    if(opts->print_times)
+        output_report(" (%7.3f s)\n", (total_mm.sum / total_mm.num));
+    else
+        output_report("\n");
+
+    print_indent(4);
+    output_report("Minimum Throughput: %6.2f MB/s", MB_PER_SEC(data_size,total_mm.max));
+    if(opts->print_times)
+        output_report(" (%7.3f s)\n", total_mm.max);
+    else
+        output_report("\n");
+}
+
+/*
+ * Function:    output_report
+ * Purpose:     Print a line of the report. Only do so if I'm the 0 process.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 19. December 2001
+ * Modifications:
+ */
+static void
+output_report(const char *fmt, ...)
+{
+        va_list ap;
+
+        va_start(ap, fmt);
+        vfprintf(output, fmt, ap);
+        va_end(ap);
+}
+
+/*
+ * Function:    print_indent
+ * Purpose:     Print spaces to indent a new line of text for pretty printing
+ *              things.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 29. October 2001
+ * Modifications:
+ */
+static void
+print_indent(register int indent)
+{
+	indent *= TAB_SPACE;
+
+	for (; indent > 0; --indent)
+	    fputc(' ', output);
+}
+
+static void
+recover_size_and_print(long_long val, const char *end)
+{
+    if (val >= ONE_KB && (val % ONE_KB) == 0) {
+        if (val >= ONE_MB && (val % ONE_MB) == 0) {
+            if (val >= ONE_GB && (val % ONE_GB) == 0)
+                HDfprintf(output, "%HdGB%s", val / ONE_GB, end);
+            else
+                HDfprintf(output, "%HdMB%s", val / ONE_MB, end);
+        } else {
+            HDfprintf(output, "%HdKB%s", val / ONE_KB, end);
+        }
+    } else {
+        HDfprintf(output, "%Hd%s", val, end);
+    }
+}
+
+static void
+print_io_api(long io_types)
+{
+    if (io_types & SIO_POSIX)
+	HDfprintf(output, "posix ");
+    if (io_types & SIO_HDF5)
+	HDfprintf(output, "hdf5 ");
+    HDfprintf(output, "\n");
+}
+
+static void
+report_parameters(struct options *opts)
+{
+    int i, rank;
+    rank = opts->dset_rank;
+
+    print_version("HDF5 Library");	/* print library version */
+    HDfprintf(output, "==== Parameters ====\n");
+
+    HDfprintf(output, "IO API=");
+    print_io_api(opts->io_types);
+
+    HDfprintf(output, "Number of iterations=%Hd\n",
+              (long_long)opts->num_iters);
+
+    HDfprintf(output, "Dataset size=");
+
+    for (i=0; i<rank; i++)
+        recover_size_and_print((long_long)opts->dset_size[i], " ");
+    HDfprintf(output, "\n");
+
+
+    HDfprintf(output, "Transfer buffer size=");
+    for (i=0; i<rank; i++)
+        recover_size_and_print((long_long)opts->buf_size[i], " ");
+    HDfprintf(output, "\n");
+
+    HDfprintf(output, "Dimension access order=");
+    for (i=0; i<rank; i++)
+        recover_size_and_print((long_long)opts->order[i], " ");
+    HDfprintf(output, "\n");
+
+    if (opts->io_types & SIO_HDF5) {
+
+        HDfprintf(output, "HDF5 data storage method=");
+
+        if (opts->h5_use_chunks){
+
+            HDfprintf(output, "Chunked\n");
+            HDfprintf(output, "HDF5 chunk size=");
+            for (i=0; i<rank; i++)
+                recover_size_and_print((long_long)opts->chk_size[i], " ");
+            HDfprintf(output, "\n");
+
+            HDfprintf(output, "HDF5 dataset dimensions=");
+            if (opts->h5_extendable) {
+                HDfprintf(output, "Extendable\n");
+            }
+            else {
+                HDfprintf(output, "Fixed\n");
+            }
+        }
+        else {
+            HDfprintf(output, "Contiguous\n");
+        }
+        
+        HDfprintf(output, "HDF5 file driver=");
+        if (opts->vfd==sec2) {
+            HDfprintf(output, "sec2\n");
+        } else if (opts->vfd==stdio) {
+            HDfprintf(output, "stdio\n");
+        } else if (opts->vfd==core) {
+            HDfprintf(output, "core\n");
+        } else if (opts->vfd==split) {
+            HDfprintf(output, "split\n");
+        } else if (opts->vfd==multi) {
+            HDfprintf(output, "multi\n");
+        } else if (opts->vfd==family) {
+            HDfprintf(output, "family\n");
+        } else if (opts->vfd==direct) {
+            HDfprintf(output, "direct\n");
+        }
+    }
+    HDfprintf(output, "==== End of Parameters ====\n");
+    HDfprintf(output, "\n");
+}
+
+/*
+ * Function:    parse_command_line
+ * Purpose:     Parse the command line options and return a STRUCT OPTIONS
+ *              structure which will need to be freed by the calling function.
+ * Return:      Pointer to an OPTIONS structure
+ * Programmer:  Bill Wendling, 31. October 2001
+ * Modifications:
+ *    Added 2D testing (Christian Chilan, 10. August 2005)
+ */
+static struct options *
+parse_command_line(int argc, char *argv[])
+{
+    register int opt;
+    struct options *cl_opts;
+    int i, default_rank, actual_rank, ranks[4];
+    cl_opts = (struct options *)malloc(sizeof(struct options));
+
+    cl_opts->output_file = NULL;
+    cl_opts->io_types =  0;    /* will set default after parsing options */
+    cl_opts->num_iters = 1;
+ 
+    default_rank = 2;
+
+    cl_opts->dset_rank = 0;
+    cl_opts->buf_rank = 0;
+    cl_opts->chk_rank = 0;
+    cl_opts->order_rank = 0;
+
+    for (i=0; i<MAX_DIMS; i++){
+        cl_opts->buf_size[i]=(i+1)*10;
+        cl_opts->dset_size[i]=(i+1)*100;
+        cl_opts->chk_size[i]=(i+1)*10;
+        cl_opts->order[i]=i+1;
+    }
+
+    cl_opts->vfd = sec2;
+   
+    cl_opts->print_times = FALSE;   /* Printing times is off by default */
+    cl_opts->print_raw = FALSE;     /* Printing raw data throughput is off by default */
+    cl_opts->h5_alignment = 1;      /* No alignment for HDF5 objects by default */
+    cl_opts->h5_threshold = 1;      /* No threshold for aligning HDF5 objects by default */
+    cl_opts->h5_use_chunks = FALSE; /* Don't chunk the HDF5 dataset by default */
+    cl_opts->h5_write_only = FALSE; /* Do both read and write by default */
+    cl_opts->h5_extendable = FALSE; /* Use extendable dataset */
+    cl_opts->h5_use_mpi_posix = FALSE; /* Don't use MPI-posix VFD for HDF5 I/O by default */
+    cl_opts->verify = FALSE;        /* No Verify data correctness by default */
+
+    while ((opt = get_option(argc, (const char **)argv, s_opts, l_opts)) != EOF) {
+        switch ((char)opt) {
+        case 'a':
+            cl_opts->h5_alignment = parse_size_directive(opt_arg);
+            break;
+        case 'A':
+            {
+                const char *end = opt_arg;
+                while (end && *end != '\0') {
+                    char buf[10];
+                    int i;
+
+                    memset(buf, '\0', sizeof(buf));
+
+                    for (i = 0; *end != '\0' && *end != ','; ++end)
+                        if (isalnum(*end) && i < 10)
+                            buf[i++] = *end;
+
+                    if (!strcasecmp(buf, "hdf5")) {
+                        cl_opts->io_types |= SIO_HDF5;
+                    } else if (!strcasecmp(buf, "posix")) {
+                        cl_opts->io_types |= SIO_POSIX;
+                    } else {
+                        fprintf(stderr, "sio_perf: invalid --api option %s\n",
+                                buf);
+                        exit(EXIT_FAILURE);
+                    }
+
+                    if (*end == '\0')
+                        break;
+
+                    end++;
+                }
+            }
+
+            break;
+#if 0
+        case 'b':
+            /* the future "binary" option */
+            break;
+#endif  /* 0 */
+        case 'c':
+            /* Turn on chunked HDF5 dataset creation */
+            cl_opts->h5_use_chunks = 1;
+            {
+                const char *end = opt_arg;
+                int j = 0;
+
+                while (end && *end != '\0') {
+                    char buf[10];
+                    int i;
+
+                    memset(buf, '\0', sizeof(buf));
+
+                    for (i = 0; *end != '\0' && *end != ','; ++end)
+                        if (isalnum(*end) && i < 10)
+                            buf[i++] = *end;
+
+                    cl_opts->chk_size[j] = parse_size_directive(buf);
+
+                    j++;
+
+                    if (*end == '\0')
+                        break;
+
+                    end++;
+                }
+                cl_opts->chk_rank = j;
+            }
+
+            break;
+
+
+        case 'D':
+            {
+                const char *end = opt_arg;
+
+                while (end && *end != '\0') {
+                    char buf[10];
+                    int i;
+
+                    memset(buf, '\0', sizeof(buf));
+
+                    for (i = 0; *end != '\0' && *end != ','; ++end)
+                        if (isalnum(*end) && i < 10)
+                            buf[i++] = *end;
+
+                    if (strlen(buf) > 1 || isdigit(buf[0])) {
+                        size_t j;
+
+                        for (j = 0; j < 10 && buf[j] != '\0'; ++j)
+                            if (!isdigit(buf[j])) {
+                                fprintf(stderr, "sio_perf: invalid --debug option %s\n",
+                                        buf);
+                                exit(EXIT_FAILURE);
+                            }
+
+                        sio_debug_level = atoi(buf);
+
+                        if (sio_debug_level > 4)
+                            sio_debug_level = 4;
+                        else if (sio_debug_level < 0)
+                            sio_debug_level = 0;
+                    } else {
+                        switch (*buf) {
+                        case 'r':
+                            /* Turn on raw data throughput info */
+                            cl_opts->print_raw = TRUE;
+                            break;
+                        case 't':
+                            /* Turn on time printing */
+                            cl_opts->print_times = TRUE;
+                            break;
+            case 'v':
+                            /* Turn on verify data correctness*/
+                cl_opts->verify = TRUE;
+                break;
+                        default:
+                            fprintf(stderr, "sio_perf: invalid --debug option %s\n", buf);
+                            exit(EXIT_FAILURE);
+                        }
+                    }
+
+                    if (*end == '\0')
+                        break;
+
+                    end++;
+                }
+            }
+
+            break;
+        case 'e':
+            {
+                const char *end = opt_arg;
+                int j = 0;
+
+                while (end && *end != '\0') {
+                    char buf[10];
+                    int i;
+
+                    memset(buf, '\0', sizeof(buf));
+
+                    for (i = 0; *end != '\0' && *end != ','; ++end)
+                        if (isalnum(*end) && i < 10)
+                            buf[i++] = *end;
+
+                    cl_opts->dset_size[j] = parse_size_directive(buf);
+
+                    j++;
+
+                    if (*end == '\0')
+                        break;
+
+                    end++;
+                }
+                cl_opts->dset_rank = j;
+            }
+
+            break;
+
+        case 'i':
+            cl_opts->num_iters = atoi(opt_arg);
+            break;
+        case 'm':
+            /* Turn on MPI-posix VFL driver for HDF5 I/O */
+            cl_opts->h5_use_mpi_posix = TRUE;
+            break;
+        case 'o':
+            cl_opts->output_file = opt_arg;
+            break;
+        case 'T':
+            cl_opts->h5_threshold = parse_size_directive(opt_arg);
+            break;
+        case 'v':
+            if (!strcasecmp(opt_arg, "sec2")) {
+                cl_opts->vfd=sec2;
+            } else if (!strcasecmp(opt_arg, "stdio")) {
+                cl_opts->vfd=stdio;
+            } else if (!strcasecmp(opt_arg, "core")) {
+                cl_opts->vfd=core;
+            } else if (!strcasecmp(opt_arg, "split")) {
+                cl_opts->vfd=split;
+            } else if (!strcasecmp(opt_arg, "multi")) {
+                cl_opts->vfd=multi;
+            } else if (!strcasecmp(opt_arg, "family")) {
+                cl_opts->vfd=family;
+            } else if (!strcasecmp(opt_arg, "direct")) {
+                cl_opts->vfd=direct;
+            } else {
+                fprintf(stderr, "sio_perf: invalid --api option %s\n",
+                                opt_arg);
+                exit(EXIT_FAILURE);
+            }
+            break;
+        case 'w':
+            cl_opts->h5_write_only = TRUE;
+            break;
+        case 't':
+            cl_opts->h5_extendable = TRUE;
+            break;
+        case 'x':
+            {
+                const char *end = opt_arg;
+                int j = 0;
+
+                while (end && *end != '\0') {
+                    char buf[10];
+                    int i;
+
+                    memset(buf, '\0', sizeof(buf));
+
+                    for (i = 0; *end != '\0' && *end != ','; ++end)
+                        if (isalnum(*end) && i < 10)
+                            buf[i++] = *end;
+
+                    cl_opts->buf_size[j] = parse_size_directive(buf);
+
+                    j++;
+
+                    if (*end == '\0')
+                        break;
+
+                    end++;
+                }
+                cl_opts->buf_rank = j;
+            }
+
+            break;
+
+        case 'r':
+            {
+                const char *end = opt_arg;
+                int j = 0;
+
+                while (end && *end != '\0') {
+                    char buf[10];
+                    int i;
+
+                    memset(buf, '\0', sizeof(buf));
+
+                    for (i = 0; *end != '\0' && *end != ','; ++end)
+                        if (isalnum(*end) && i < 10)
+                            buf[i++] = *end;
+
+                    cl_opts->order[j] = parse_size_directive(buf);
+
+                    j++;
+
+                    if (*end == '\0')
+                        break;
+
+                    end++;
+                }
+
+                cl_opts->order_rank = j;
+            }
+
+            break;
+
+        case 'h':
+        case '?':
+        default:
+            usage(progname);
+            free(cl_opts);
+            return NULL;
+        }
+    }
+
+    /* perform rank consistency analysis */
+    actual_rank = 0;
+
+    ranks[0] = cl_opts->dset_rank;
+    ranks[1] = cl_opts->buf_rank;
+    ranks[2] = cl_opts->order_rank;
+    ranks[3] = cl_opts->chk_rank;
+
+    for (i=0; i<4; i++) {
+        if (ranks[i]>0) {
+            if (!actual_rank) {
+                actual_rank = ranks[i];
+            }
+            else {
+                if (actual_rank != ranks[i])
+                    exit(EXIT_FAILURE);
+            }
+        }
+    }
+
+    if (!actual_rank)
+        actual_rank = default_rank;
+
+    cl_opts->dset_rank = actual_rank;
+    cl_opts->buf_rank = actual_rank;
+    cl_opts->order_rank = actual_rank;
+    cl_opts->chk_rank = actual_rank;
+
+
+    /* set default if none specified yet */
+    if (!cl_opts->io_types)
+        cl_opts->io_types = SIO_HDF5 | SIO_POSIX; /* run all API */
+
+    /* verify parameters sanity.  Adjust if needed. */
+    /* cap xfer_size with bytes per process */
+    if (cl_opts->num_iters <= 0)
+        cl_opts->num_iters = 1;
+
+    return cl_opts;
+}
+
+/*
+ * Function:    parse_size_directive
+ * Purpose:     Parse the size directive passed on the commandline. The size
+ *              directive is an integer followed by a size indicator:
+ *
+ *                  K, k - Kilobyte
+ *                  M, m - Megabyte
+ *                  G, g - Gigabyte
+ *
+ * Return:      The size as a off_t because this is related to file size.
+ *              If an unknown size indicator is used, then the program will
+ *              exit with EXIT_FAILURE as the return value.
+ * Programmer:  Bill Wendling, 18. December 2001
+ * Modifications:
+ */
+
+static off_t
+parse_size_directive(const char *size)
+{
+    off_t s;
+    char *endptr;
+
+    s = strtol(size, &endptr, 10);
+
+    if (endptr && *endptr) {
+        while (*endptr != '\0' && (*endptr == ' ' || *endptr == '\t'))
+            ++endptr;
+
+        switch (*endptr) {
+            case 'K':
+            case 'k':
+                s *= ONE_KB;
+                break;
+            case 'M':
+            case 'm':
+                s *= ONE_MB;
+                break;
+            case 'G':
+            case 'g':
+                s *= ONE_GB;
+                break;
+            default:
+                fprintf(stderr, "Illegal size specifier '%c'\n", *endptr);
+                exit(EXIT_FAILURE);
+        }
+    }
+
+    return s;
+}
+
+/*
+ * Function:    usage
+ * Purpose:     Print a usage message and then exit.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 31. October 2001
+ * Modifications:
+ * 	Added 2D testing (Christian Chilan, 10. August 2005)
+ */
+static void
+usage(const char *prog)
+{
+
+
+	print_version(prog);
+        printf("usage: %s [OPTIONS]\n", prog);
+        printf("  OPTIONS\n");
+        printf("     -h, --help                  Print a usage message and exit\n");
+        printf("     -a S, --align=S             Alignment of objects in HDF5 file [default: 1]\n");
+        printf("     -A AL, --api=AL             Which APIs to test [default: all of them]\n");
+#if 0
+        printf("     -b, --binary                The elusive binary option\n");
+#endif  /* 0 */
+        printf("     -B S, --block-size=S        Block size within transfer buffer\n");
+        printf("                                 (see below for description)\n");
+        printf("                                 [default: half the number of bytes per processor per dataset]\n");
+        printf("     -c, --chunk                 Create HDF5 datasets chunked [default: off]\n");
+        printf("     -C, --collective            Use collective I/O for MPI and HDF5 APIs\n");
+        printf("                                 [default: off (i.e. independent I/O)]\n");
+        printf("     -d N, --num-dsets=N         Number of datasets per file [default:1]\n");
+        printf("     -D DL, --debug=DL           Indicate the debugging level\n");
+        printf("                                 [default: no debugging]\n");
+        printf("     -e S, --num-bytes=S         Number of bytes per process per dataset\n");
+        printf("                                 [default: 256K for 1D, 8K for 2D]\n");
+        printf("     -F N, --num-files=N         Number of files [default: 1]\n");
+        printf("     -g, --geometry              Use 2D geometry [default: 1D]\n");
+        printf("     -i N, --num-iterations=N    Number of iterations to perform [default: 1]\n");
+        printf("     -I, --interleaved           Interleaved block I/O (see below for example)\n");
+        printf("                                 [default: Contiguous block I/O]\n");
+        printf("     -m, --mpi-posix             Use MPI-posix driver for HDF5 I/O\n");
+        printf("                                 [default: use MPI-I/O driver]\n");
+        printf("     -o F, --output=F            Output raw data into file F [default: none]\n");
+        printf("     -p N, --min-num-processes=N Minimum number of processes to use [default: 1]\n");
+        printf("     -P N, --max-num-processes=N Maximum number of processes to use\n");
+        printf("                                 [default: all MPI_COMM_WORLD processes ]\n");
+        printf("     -T S, --threshold=S         Threshold for alignment of objects in HDF5 file\n");
+        printf("                                 [default: 1]\n");
+        printf("     -w, --write-only            Perform write tests not the read tests\n");
+        printf("     -x S, --min-xfer-size=S     Minimum transfer buffer size\n");
+        printf("                                 [default: half the number of bytes per processor per dataset]\n");
+        printf("     -X S, --max-xfer-size=S     Maximum transfer buffer size\n");
+        printf("                                 [default: the number of bytes per processor per dataset]\n");
+        printf("\n");
+        printf("  F  - is a filename.\n");
+        printf("  N  - is an integer >=0.\n");
+        printf("  S  - is a size specifier, an integer >=0 followed by a size indicator:\n");
+        printf("          K - Kilobyte (%d)\n", ONE_KB);
+        printf("          M - Megabyte (%d)\n", ONE_MB);
+        printf("          G - Gigabyte (%d)\n", ONE_GB);
+        printf("\n");
+        printf("      Example: '37M' is 37 megabytes or %d bytes\n", 37*ONE_MB);
+        printf("\n");
+        printf("  AL - is an API list. Valid values are:\n");
+        printf("          phdf5 - Parallel HDF5\n");
+        printf("          mpiio - MPI-I/O\n");
+        printf("          posix - POSIX\n");
+        printf("\n");
+        printf("      Example: --api=mpiio,phdf5\n");
+        printf("\n");
+        printf("  Block size vs. Transfer buffer size:\n");
+        printf("      The transfer buffer size is the size of a buffer in memory, which is\n");
+        printf("      broken into 'block size' pieces and written to the file.  The pattern\n");
+        printf("      of the blocks in the file is described below in the 'Interleaved vs.\n");
+        printf("      Contiguous blocks' example.\n");
+        printf("\n");
+        printf("      If the collective I/O option is given, the blocks in each transfer buffer\n");
+        printf("      are written at once with an MPI derived type, for the MPI-I/O and PHDF5\n");
+        printf("      APIs.\n");
+        printf("\n");
+        printf("  Interleaved vs. Contiguous blocks:\n");
+        printf("      When contiguous blocks are written to a dataset, the dataset is divided\n");
+        printf("      into '# processes' regions and each process writes data to its own region.\n");
+        printf("      When interleaved blocks are written to a dataset, space for the first\n");
+        printf("      block of the first process is allocated in the dataset, then space is\n");
+        printf("      allocated for the first block of the second process, etc. until space is\n");
+        printf("      allocated for the first block of each process, then space is allocated for\n");
+        printf("      the second block of the first process, the second block of the second\n");
+        printf("      process, etc.\n");
+        printf("\n");
+        printf("      For example, with a 4 process run, 1MB bytes-per-process, 256KB transfer\n");
+        printf("        buffer size, and 64KB block size,\n");
+        printf("          16 contiguous blocks per process are written to the file like so:\n");
+        printf("              1111111111111111222222222222222233333333333333334444444444444444\n");
+        printf("          16 interleaved blocks per process are written to the file like so:\n");
+        printf("              1234123412341234123412341234123412341234123412341234123412341234\n");
+        printf("        If collective I/O is turned on, all of the four blocks per transfer\n");
+        printf("        buffer will be written in one collective I/O call.\n");
+        printf("\n");
+        printf("  DL - is a list of debugging flags. Valid values are:\n");
+        printf("          1 - Minimal\n");
+        printf("          2 - Not quite everything\n");
+        printf("          3 - Everything\n");
+        printf("          4 - The kitchen sink\n");
+        printf("          r - Raw data I/O throughput information\n");
+        printf("          t - Times as well as throughputs\n");
+        printf("          v - Verify data correctness\n");
+        printf("\n");
+        printf("      Example: --debug=2,r,t\n");
+        printf("\n");
+        printf("  Environment variables:\n");
+        printf("  HDF5_NOCLEANUP   Do not remove data files if set [default remove]\n");
+        printf("  HDF5_MPI_INFO    MPI INFO object key=value separated by ;\n");
+        printf("  HDF5_PARAPREFIX  Paralllel data files prefix\n");
+        fflush(stdout);
+}
+
diff --git a/perform/sio_perf.h b/perform/sio_perf.h
new file mode 100644
index 0000000..b038661
--- /dev/null
+++ b/perform/sio_perf.h
@@ -0,0 +1,105 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * Copyright by the Board of Trustees of the University of Illinois.         *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+#ifndef SIO_PERF_H__
+#define SIO_PERF_H__
+
+#include "sio_timer.h"
+#ifndef STANDALONE
+#include "H5private.h"
+#include "h5test.h"
+#include "h5tools_utils.h"
+#else
+#include "sio_standalone.h"
+#endif
+
+/* setup the dataset no fill option if this is v1.5 or more */
+#if H5_VERS_MAJOR > 1 || H5_VERS_MINOR > 4
+#define H5_HAVE_NOFILL 1
+#endif
+
+#define MAX_DIMS 32
+
+typedef enum iotype_ {
+    POSIXIO,
+    HDF5
+    /*NUM_TYPES*/
+} iotype;
+
+typedef enum vfdtype_ {
+    sec2,
+    stdio,
+    core,
+    split,
+    multi,
+    family,
+    direct
+    /*NUM_TYPES*/
+} vfdtype;
+
+typedef struct parameters_ {
+    iotype	io_type;        /* The type of IO test to perform       */
+    vfdtype     vfd;
+    long	num_files;      /* Number of files to create            */
+    long	num_dsets;      /* Number of datasets to create         */
+    off_t	num_bytes;      /* Number of bytes in each dset         */
+    int         num_iters;      /* Number of times to loop doing the IO */
+    int         rank;           /* Rank of dataset */
+    off_t 	dset_size[MAX_DIMS]; /* Dataset size             */
+    size_t 	buf_size[MAX_DIMS]; /* Buffer size               */
+    size_t 	chk_size[MAX_DIMS]; /* Chunk size               */
+    int  	order[MAX_DIMS]; /* Buffer size               */
+    hsize_t 	h5_align;       /* HDF5 object alignment                */
+    hsize_t 	h5_thresh;      /* HDF5 object alignment threshold      */
+    int 	h5_use_chunks;  /* Make HDF5 dataset chunked            */
+    int 	h5_extendable;  /* Make HDF5 dataset chunked            */
+    int    	h5_write_only;  /* Perform the write tests only         */
+    unsigned    h5_use_mpi_posix;   /* VFD for HDF5 I/O  */
+    int 	verify;    	/* Verify data correctness              */
+} parameters;
+
+typedef struct results_ {
+    herr_t      ret_code;
+    sio_time   *timers;
+} results;
+
+#ifndef SUCCESS
+#define SUCCESS     0
+#endif  /* !SUCCESS */
+
+#ifndef FAIL
+#define FAIL        -1
+#endif  /* !FAIL */
+
+extern FILE     *output;            /* output file                          */
+extern sio_time *timer_g;           /* timer: global for stub functions     */
+extern int      sio_debug_level;    /* The debug level:
+                                     *   0 - Off
+                                     *   1 - Minimal
+                                     *   2 - Some more
+                                     *   3 - Maximal
+                                     *   4 - Even More Debugging (timer stuff)
+                                     */
+#ifdef __cplusplus
+extern "C" {
+#endif  /* __cplusplus */
+
+extern results do_sio(parameters param);
+
+#ifdef __cplusplus
+}
+#endif  /* __cplusplus */
+
+#endif  /* PIO_PERF_H__ */
diff --git a/perform/sio_standalone.c b/perform/sio_standalone.c
new file mode 100644
index 0000000..8a93541
--- /dev/null
+++ b/perform/sio_standalone.c
@@ -0,0 +1,286 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * Copyright by the Board of Trustees of the University of Illinois.         *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+
+/* This file contains the definition of functions required to build h5perf in
+ * STANDALONE mode.
+ * Created: Christian Chilan, 2005/5/18.
+ */
+
+#include "sio_perf.h"
+
+
+/** From h5tools_utils.c **/
+
+/* global variables */
+int   nCols = 80;
+
+/* ``get_option'' variables */
+int         opt_err = 1;    /*get_option prints errors if this is on */
+int         opt_ind = 1;    /*token pointer                          */
+const char *opt_arg;        /*flag argument (or value)               */
+
+
+int
+get_option(int argc, const char **argv, const char *opts, const struct long_options *l_opts)
+{
+    static int sp = 1;    /* character index in current token */
+    int opt_opt = '?';    /* option character passed back to user */
+
+    if (sp == 1) {
+        /* check for more flag-like tokens */
+        if (opt_ind >= argc || argv[opt_ind][0] != '-' || argv[opt_ind][1] == '\0') {
+            return EOF;
+        } else if (HDstrcmp(argv[opt_ind], "--") == 0) {
+            opt_ind++;
+            return EOF;
+        }
+    }
+
+    if (sp == 1 && argv[opt_ind][0] == '-' && argv[opt_ind][1] == '-') {
+        /* long command line option */
+        const char *arg = &argv[opt_ind][2];
+        int i;
+
+        for (i = 0; l_opts && l_opts[i].name; i++) {
+            size_t len = HDstrlen(l_opts[i].name);
+
+            if (HDstrncmp(arg, l_opts[i].name, len) == 0) {
+                /* we've found a matching long command line flag */
+                opt_opt = l_opts[i].shortval;
+
+                if (l_opts[i].has_arg != no_arg) {
+                    if (arg[len] == '=') {
+                        opt_arg = &arg[len + 1];
+                    } else if (opt_ind < (argc - 1) && argv[opt_ind + 1][0] != '-') {
+                        opt_arg = argv[++opt_ind];
+                    } else if (l_opts[i].has_arg == require_arg) {
+                        if (opt_err)
+                            HDfprintf(stderr,
+                                    "%s: option required for \"--%s\" flag\n",
+                                    argv[0], arg);
+
+                        opt_opt = '?';
+                    }
+                } else {
+                    if (arg[len] == '=') {
+                        if (opt_err)
+                            HDfprintf(stderr,
+                                    "%s: no option required for \"%s\" flag\n",
+                                    argv[0], arg);
+
+                        opt_opt = '?';
+                    }
+
+                    opt_arg = NULL;
+                }
+
+                break;
+            }
+        }
+
+        if (l_opts[i].name == NULL) {
+            /* exhausted all of the l_opts we have and still didn't match */
+            if (opt_err)
+                HDfprintf(stderr, "%s: unknown option \"%s\"\n", argv[0], arg);
+
+            opt_opt = '?';
+        }
+
+        opt_ind++;
+        sp = 1;
+    } else {
+        register char *cp;    /* pointer into current token */
+
+        /* short command line option */
+        opt_opt = argv[opt_ind][sp];
+
+        if (opt_opt == ':' || (cp = strchr(opts, opt_opt)) == 0) {
+
+            if (opt_err)
+                HDfprintf(stderr, "%s: unknown option \"%c\"\n",
+                        argv[0], opt_opt);
+
+            /* if no chars left in this token, move to next token */
+            if (argv[opt_ind][++sp] == '\0') {
+                opt_ind++;
+                sp = 1;
+            }
+
+            return '?';
+        }
+
+        if (*++cp == ':') {
+            /* if a value is expected, get it */
+            if (argv[opt_ind][sp + 1] != '\0') {
+                /* flag value is rest of current token */
+                opt_arg = &argv[opt_ind++][sp + 1];
+            } else if (++opt_ind >= argc) {
+                if (opt_err)
+                    HDfprintf(stderr,
+                            "%s: value expected for option \"%c\"\n",
+                            argv[0], opt_opt);
+
+                opt_opt = '?';
+            } else {
+                /* flag value is next token */
+                opt_arg = argv[opt_ind++];
+            }
+
+            sp = 1;
+        } else {
+            /* set up to look at next char in token, next time */
+            if (argv[opt_ind][++sp] == '\0') {
+                /* no more in current token, so setup next token */
+                opt_ind++;
+                sp = 1;
+            }
+
+            opt_arg = NULL;
+        }
+    }
+
+    /* return the current flag character found */
+    return opt_opt;
+}
+
+
+void
+print_version(const char *progname)
+{
+    printf("%s: Version %u.%u.%u%s%s\n",
+           progname, H5_VERS_MAJOR, H5_VERS_MINOR, H5_VERS_RELEASE,
+           H5_VERS_SUBRELEASE[0] ? "-" : "", H5_VERS_SUBRELEASE);
+}
+
+
+
+/** From h5test.c **/
+
+#ifdef H5_HAVE_PARALLEL
+MPI_Info    h5_io_info_g=MPI_INFO_NULL;/* MPI INFO object for IO */
+#endif
+
+#if 0
+int
+h5_set_info_object(void)
+{
+    char	*envp;			/* environment pointer */
+    int		ret_value=0;
+
+    /* handle any MPI INFO hints via $HDF5_MPI_INFO */
+    if ((envp = getenv("HDF5_MPI_INFO")) != NULL){
+        char *next, *valp;
+
+
+        valp = envp = next = HDstrdup(envp);
+
+        /* create an INFO object if not created yet */
+        if (h5_io_info_g == MPI_INFO_NULL)
+            MPI_Info_create(&h5_io_info_g);
+
+        do {
+            size_t len;
+            char *key_val, *endp, *namep;
+
+            if (*valp == ';')
+                valp++;
+
+            /* copy key/value pair into temporary buffer */
+            len = strcspn(valp, ";");
+            next = &valp[len];
+            key_val = calloc(1, len + 1);
+
+            /* increment the next pointer past the terminating semicolon */
+            if (*next == ';')
+                ++next;
+
+            namep = HDstrncpy(key_val, valp, len);
+
+            /* pass up any beginning whitespaces */
+            while (*namep && (*namep == ' ' || *namep == '\t'))
+                namep++;
+
+            /* eat up any ending white spaces */
+            endp = &namep[strlen(namep) - 1];
+
+            while (endp && (*endp == ' ' || *endp == '\t'))
+                *endp-- = '\0';
+
+            /* find the '=' */
+
+            valp = HDstrchr(namep, '=');
+
+            if (valp != NULL) {     /* it's a valid key/value pairing */
+                char *tmp_val = valp + 1;
+
+                /* change '=' to \0, move valp down one */
+                *valp-- = '\0';
+
+                /* eat up ending whitespace on the "key" part */
+                while (*valp == ' ' || *valp == '\t')
+                    *valp-- = '\0';
+
+                valp = tmp_val;
+
+                /* eat up beginning whitespace on the "value" part */
+                while (*valp == ' ' || *valp == '\t')
+                    *valp++ = '\0';
+
+                /* actually set the darned thing */
+                if (MPI_SUCCESS != MPI_Info_set(h5_io_info_g, namep, valp)) {
+                    printf("MPI_Info_set failed\n");
+                    ret_value = -1;
+                }
+            }
+
+            valp = next;
+            HDfree(key_val);
+        } while (next && *next);
+
+        HDfree(envp);
+    }
+
+    return ret_value;
+}
+
+
+void
+h5_dump_info_object(MPI_Info info)
+{
+    char	key[MPI_MAX_INFO_KEY+1];
+    char	value[MPI_MAX_INFO_VAL+1];
+    int  	flag;
+    int		i, nkeys;
+
+    printf("Dumping MPI Info Object(%d) (up to %d bytes per item):\n", (int)info,
+	MPI_MAX_INFO_VAL);
+    if (info==MPI_INFO_NULL){
+	printf("object is MPI_INFO_NULL\n");
+    }
+    else {
+	MPI_Info_get_nkeys(info, &nkeys);
+	printf("object has %d items\n", nkeys);
+	for (i=0; i<nkeys; i++){
+	    MPI_Info_get_nthkey(info, i, key);
+	    MPI_Info_get(info, key, MPI_MAX_INFO_VAL, value, &flag);
+	    printf("%s=%s\n", key, value);
+	}
+
+    }
+}
+
+#endif
+
diff --git a/perform/sio_standalone.h b/perform/sio_standalone.h
new file mode 100644
index 0000000..1f83f61
--- /dev/null
+++ b/perform/sio_standalone.h
@@ -0,0 +1,544 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * Copyright by the Board of Trustees of the University of Illinois.         *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+#ifndef SIO_STANDALONE_H__
+#define SIO_PERF_H__
+
+/* Header file for building h5perf by standalone mode.
+ * Created: Christian Chilan, 2005/5/18.
+ */
+
+/** From H5private.h **/
+
+#include "H5public.h"		 /* Include Public Definitions		*/
+
+
+/*
+ * Include ANSI-C header files.
+ */
+#ifdef H5_STDC_HEADERS
+#   include <assert.h>
+#   include <ctype.h>
+#   include <errno.h>
+#   include <fcntl.h>
+#   include <float.h>
+#   include <limits.h>
+#   include <math.h>
+#   include <signal.h>
+#   include <stdarg.h>
+#   include <stdio.h>
+#   include <stdlib.h>
+#   include <string.h>
+#endif
+
+/* maximum of two, three, or four values */
+#undef MAX
+#define MAX(a,b)                (((a)>(b)) ? (a) : (b))
+#define MAX2(a,b)               MAX(a,b)
+#define MAX3(a,b,c)             MAX(a,MAX(b,c))
+#define MAX4(a,b,c,d)           MAX(MAX(a,b),MAX(c,d))
+
+/*
+ * A macro to portably increment enumerated types.
+ */
+#ifndef H5_INC_ENUM
+#  define H5_INC_ENUM(TYPE,VAR) (VAR)=((TYPE)((VAR)+1))
+#endif
+
+/*
+ * Redefine all the POSIX functions.  We should never see a POSIX
+ * function (or any other non-HDF5 function) in the source!
+ */
+#define HDabort()               abort()
+#define HDabs(X)                abs(X)
+#define HDaccess(F,M)           access(F, M)
+#define HDacos(X)               acos(X)
+#ifdef H5_HAVE_ALARM
+#define HDalarm(N)              alarm(N)
+#else /* H5_HAVE_ALARM */
+#define HDalarm(N)              (0)
+#endif /* H5_HAVE_ALARM */
+#define HDasctime(T)            asctime(T)
+#define HDasin(X)               asin(X)
+#define HDassert(X)             assert(X)
+#define HDatan(X)               atan(X)
+#define HDatan2(X,Y)            atan2(X,Y)
+#define HDatexit(F)             atexit(F)
+#define HDatof(S)               atof(S)
+#define HDatoi(S)               atoi(S)
+#define HDatol(S)               atol(S)
+#define HDBSDgettimeofday(S,P)  BSDgettimeofday(S,P)
+#define HDbsearch(K,B,N,Z,F)    bsearch(K,B,N,Z,F)
+#define HDcalloc(N,Z)           calloc(N,Z)
+#define HDceil(X)               ceil(X)
+#define HDcfgetispeed(T)        cfgetispeed(T)
+#define HDcfgetospeed(T)        cfgetospeed(T)
+#define HDcfsetispeed(T,S)      cfsetispeed(T,S)
+#define HDcfsetospeed(T,S)      cfsetospeed(T,S)
+#define HDchdir(S)              chdir(S)
+#define HDchmod(S,M)            chmod(S,M)
+#define HDchown(S,O,G)          chown(S,O,G)
+#define HDclearerr(F)           clearerr(F)
+#define HDclock()               clock()
+#define HDclose(F)              close(F)
+#define HDclosedir(D)           closedir(D)
+#define HDcos(X)                cos(X)
+#define HDcosh(X)               cosh(X)
+#define HDcreat(S,M)            creat(S,M)
+#define HDctermid(S)            ctermid(S)
+#define HDctime(T)              ctime(T)
+#define HDcuserid(S)            cuserid(S)
+#ifdef H5_HAVE_DIFFTIME
+#define HDdifftime(X,Y)         difftime(X,Y)
+#else
+#define HDdifftime(X,Y)         ((double)(X)-(double)(Y))
+#endif
+#define HDdiv(X,Y)              div(X,Y)
+#define HDdup(F)                dup(F)
+#define HDdup2(F,I)             dup2(F,I)
+/* execl() variable arguments */
+/* execle() variable arguments */
+/* execlp() variable arguments */
+#define HDexecv(S,AV)           execv(S,AV)
+#define HDexecve(S,AV,E)        execve(S,AV,E)
+#define HDexecvp(S,AV)          execvp(S,AV)
+#define HDexit(N)               exit(N)
+#if defined __MWERKS__
+#include <abort_exit.h>
+#define HD_exit(N)              __exit(N)
+#else /* __MWERKS __ */
+#define HD_exit(N)              _exit(N)
+#endif /* __MWERKS __ */
+#define HDexp(X)                exp(X)
+#define HDfabs(X)               fabs(X)
+/* use ABS() because fabsf() fabsl() are not common yet. */
+#define HDfabsf(X)              ABS(X)
+#define HDfabsl(X)              ABS(X)
+#define HDfclose(F)             fclose(F)
+/* fcntl() variable arguments */
+#define HDfdopen(N,S)           fdopen(N,S)
+#define HDfeof(F)               feof(F)
+#define HDferror(F)             ferror(F)
+#define HDfflush(F)             fflush(F)
+#define HDfgetc(F)              fgetc(F)
+#define HDfgetpos(F,P)          fgetpos(F,P)
+#define HDfgets(S,N,F)          fgets(S,N,F)
+#ifdef _WIN32
+#define HDfileno(F)             _fileno(F)
+#else /* _WIN32 */
+#define HDfileno(F)             fileno(F)
+#endif /* _WIN32 */
+#define HDfloor(X)              floor(X)
+#define HDfmod(X,Y)             fmod(X,Y)
+#define HDfopen(S,M)            fopen(S,M)
+#define HDfork()                fork()
+#define HDfpathconf(F,N)        fpathconf(F,N)
+H5_DLL int HDfprintf (FILE *stream, const char *fmt, ...);
+#define HDfputc(C,F)            fputc(C,F)
+#define HDfputs(S,F)            fputs(S,F)
+#define HDfread(M,Z,N,F)        fread(M,Z,N,F)
+#define HDfree(M)               free(M)
+#define HDfreopen(S,M,F)        freopen(S,M,F)
+#define HDfrexp(X,N)            frexp(X,N)
+/* Check for Cray-specific 'frexpf()' and 'frexpl()' routines */
+#ifdef H5_HAVE_FREXPF
+#define HDfrexpf(X,N)           frexpf(X,N)
+#else /* H5_HAVE_FREXPF */
+#define HDfrexpf(X,N)           frexp(X,N)
+#endif /* H5_HAVE_FREXPF */
+#ifdef H5_HAVE_FREXPL
+#define HDfrexpl(X,N)           frexpl(X,N)
+#else /* H5_HAVE_FREXPL */
+#define HDfrexpl(X,N)           frexp(X,N)
+#endif /* H5_HAVE_FREXPL */
+/* fscanf() variable arguments */
+#ifdef H5_HAVE_FSEEKO
+     #define HDfseek(F,O,W)     fseeko(F,O,W)
+#else
+     #define HDfseek(F,O,W)     fseek(F,O,W)
+#endif
+#define HDfsetpos(F,P)          fsetpos(F,P)
+/* definitions related to the file stat utilities.
+ * Windows have its own function names.
+ * For Unix, if off_t is not 64bit big, try use the pseudo-standard
+ * xxx64 versions if available.
+ */
+#ifdef _WIN32
+    #ifdef __MWERKS__
+    #define HDfstat(F,B)        fstat(F,B)
+    #define HDstat(S,B)         stat(S,B)
+    typedef struct stat         h5_stat_t;
+    typedef off_t               h5_stat_size_t;
+    #else /*MSVC*/
+    #define HDfstat(F,B)        _fstati64(F,B)
+    #define HDstat(S,B)         _stati64(S,B)
+    typedef struct _stati64     h5_stat_t;
+    typedef __int64             h5_stat_size_t;
+    #endif
+#elif H5_SIZEOF_OFF_T!=8 && H5_SIZEOF_OFF64_T==8 && defined(H5_HAVE_STAT64)
+    #define HDfstat(F,B)        fstat64(F,B)
+    #define HDstat(S,B)         stat64(S,B)
+    typedef struct stat64       h5_stat_t;
+    typedef off64_t             h5_stat_size_t;
+#else
+    #define HDfstat(F,B)        fstat(F,B)
+    #define HDstat(S,B)         stat(S,B)
+    typedef struct stat         h5_stat_t;
+    typedef off_t               h5_stat_size_t;
+#endif
+
+#define HDftell(F)              ftell(F)
+#define HDftruncate(F,L)        ftruncate(F,L)
+#define HDfwrite(M,Z,N,F)       fwrite(M,Z,N,F)
+#define HDgetc(F)               getc(F)
+#define HDgetchar()             getchar()
+#define HDgetcwd(S,Z)           getcwd(S,Z)
+#define HDgetegid()             getegid()
+#define HDgetenv(S)             getenv(S)
+#define HDgeteuid()             geteuid()
+#define HDgetgid()              getgid()
+#define HDgetgrgid(G)           getgrgid(G)
+#define HDgetgrnam(S)           getgrnam(S)
+#define HDgetgroups(Z,G)        getgroups(Z,G)
+#define HDgetlogin()            getlogin()
+#define HDgetpgrp()             getpgrp()
+#define HDgetpid()              getpid()
+#define HDgetppid()             getppid()
+#define HDgetpwnam(S)           getpwnam(S)
+#define HDgetpwuid(U)           getpwuid(U)
+#define HDgetrusage(X,S)        getrusage(X,S)
+#define HDgets(S)               gets(S)
+#define HDgettimeofday(S,P)     gettimeofday(S,P)
+#define HDgetuid()              getuid()
+#define HDgmtime(T)             gmtime(T)
+#define HDisalnum(C)            isalnum((int)(C)) /*cast for solaris warning*/
+#define HDisalpha(C)            isalpha((int)(C)) /*cast for solaris warning*/
+#define HDisatty(F)             isatty(F)
+#define HDiscntrl(C)            iscntrl((int)(C)) /*cast for solaris warning*/
+#define HDisdigit(C)            isdigit((int)(C)) /*cast for solaris warning*/
+#define HDisgraph(C)            isgraph((int)(C)) /*cast for solaris warning*/
+#define HDislower(C)            islower((int)(C)) /*cast for solaris warning*/
+#define HDisprint(C)            isprint((int)(C)) /*cast for solaris warning*/
+#define HDispunct(C)            ispunct((int)(C)) /*cast for solaris warning*/
+#define HDisspace(C)            isspace((int)(C)) /*cast for solaris warning*/
+#define HDisupper(C)            isupper((int)(C)) /*cast for solaris warning*/
+#define HDisxdigit(C)           isxdigit((int)(C)) /*cast for solaris warning*/
+#define HDkill(P,S)             kill(P,S)
+#define HDlabs(X)               labs(X)
+#define HDldexp(X,N)            ldexp(X,N)
+#define HDldiv(X,Y)             ldiv(X,Y)
+#define HDlink(OLD,NEW)         link(OLD,NEW)
+#define HDlocaleconv()          localeconv()
+#define HDlocaltime(T)          localtime(T)
+#define HDlog(X)                log(X)
+#define HDlog10(X)              log10(X)
+#define HDlongjmp(J,N)          longjmp(J,N)
+#ifdef _WIN32
+     #ifdef __MWERKS__
+        #define HDlseek(F,O,W)  lseek(F,O,W)
+     #else /*MSVS */
+        #define HDlseek(F,O,W)  _lseeki64(F,O,W)
+     #endif
+#else
+     #ifdef H5_HAVE_FSEEK64
+        #define HDlseek(F,O,W)  lseek64(F,O,W)
+     #else
+        #define HDlseek(F,O,W)  lseek(F,O,W)
+     #endif
+#endif
+#define HDmalloc(Z)             malloc(Z)
+#define HDposix_memalign(P,A,Z) posix_memalign(P,A,Z)
+#define HDmblen(S,N)            mblen(S,N)
+#define HDmbstowcs(P,S,Z)       mbstowcs(P,S,Z)
+#define HDmbtowc(P,S,Z)         mbtowc(P,S,Z)
+#define HDmemchr(S,C,Z)         memchr(S,C,Z)
+#define HDmemcmp(X,Y,Z)         memcmp(X,Y,Z)
+/*
+ * The (char*) casts are required for the DEC when optimizations are turned
+ * on and the source and/or destination are not aligned.
+ */
+#define HDmemcpy(X,Y,Z)         memcpy((char*)(X),(const char*)(Y),Z)
+#define HDmemmove(X,Y,Z)        memmove((char*)(X),(const char*)(Y),Z)
+/*
+ * The (void*) cast just avoids a compiler warning in _WIN32
+ */
+#ifdef _WIN32
+#define HDmemset(X,C,Z)         memset((void*)(X),C,Z)
+#else /* _WIN32 */
+#define HDmemset(X,C,Z)         memset(X,C,Z)
+#endif /* _WIN32 */
+#ifdef _WIN32
+#define HDmkdir(S,M)            _mkdir(S)
+#else /* _WIN32 */
+#define HDmkdir(S,M)            mkdir(S,M)
+#endif /* _WIN32 */
+#define HDmkfifo(S,M)           mkfifo(S,M)
+#define HDmktime(T)             mktime(T)
+#define HDmodf(X,Y)             modf(X,Y)
+#ifdef _O_BINARY
+#define HDopen(S,F,M)           open(S,F|_O_BINARY,M)
+#else
+#define HDopen(S,F,M)           open(S,F,M)
+#endif
+#define HDopendir(S)            opendir(S)
+#define HDpathconf(S,N)         pathconf(S,N)
+#define HDpause()               pause()
+#define HDperror(S)             perror(S)
+#define HDpipe(F)               pipe(F)
+#define HDpow(X,Y)              pow(X,Y)
+/* printf() variable arguments */
+#define HDputc(C,F)             putc(C,F)
+#define HDputchar(C)            putchar(C)
+#define HDputs(S)               puts(S)
+#define HDqsort(M,N,Z,F)        qsort(M,N,Z,F)
+#define HDraise(N)              raise(N)
+
+#ifdef H5_HAVE_RAND_R
+#define HDrandom()              HDrand()
+H5_DLL int HDrand(void);
+#elif H5_HAVE_RANDOM
+#define HDrand()                random()
+#define HDrandom()              random()
+#else
+#define HDrand()                rand()
+#define HDrandom()              rand()
+#endif
+
+#define HDread(F,M,Z)           read(F,M,Z)
+#define HDreaddir(D)            readdir(D)
+#define HDrealloc(M,Z)          realloc(M,Z)
+#ifdef H5_VMS
+#ifdef __cplusplus
+extern "C" {
+#endif
+int HDremove_all(const char * fname);
+#ifdef __cplusplus
+}
+#endif
+#define HDremove(S)             HDremove_all(S)
+#else
+#define HDremove(S)             remove(S)
+#endif /*H5_VMS*/
+#define HDrename(OLD,NEW)       rename(OLD,NEW)
+#define HDrewind(F)             rewind(F)
+#define HDrewinddir(D)          rewinddir(D)
+#define HDrmdir(S)              rmdir(S)
+/* scanf() variable arguments */
+#define HDsetbuf(F,S)           setbuf(F,S)
+#define HDsetgid(G)             setgid(G)
+#define HDsetjmp(J)             setjmp(J)
+#define HDsetlocale(N,S)        setlocale(N,S)
+#define HDsetpgid(P,PG)         setpgid(P,PG)
+#define HDsetsid()              setsid()
+#define HDsetuid(U)             setuid(U)
+/* Windows does not permit setting the buffer size to values
+   less than 2.  */
+#ifndef _WIN32
+#define HDsetvbuf(F,S,M,Z)      setvbuf(F,S,M,Z)
+#else
+#define HDsetvbuf(F,S,M,Z)  setvbuf(F,S,M,(Z>1?Z:2))
+#endif
+#define HDsigaction(N,A)        sigaction(N,A)
+#define HDsigaddset(S,N)        sigaddset(S,N)
+#define HDsigdelset(S,N)        sigdelset(S,N)
+#define HDsigemptyset(S)        sigemptyset(S)
+#define HDsigfillset(S)         sigfillset(S)
+#define HDsigismember(S,N)      sigismember(S,N)
+#define HDsiglongjmp(J,N)       siglongjmp(J,N)
+#define HDsignal(N,F)           signal(N,F)
+#define HDsigpending(S)         sigpending(S)
+#define HDsigprocmask(H,S,O)    sigprocmask(H,S,O)
+#define HDsigsetjmp(J,N)        sigsetjmp(J,N)
+#define HDsigsuspend(S)         sigsuspend(S)
+#define HDsin(X)                sin(X)
+#define HDsinh(X)               sinh(X)
+#define HDsleep(N)              sleep(N)
+#ifdef _WIN32
+#define HDsnprintf              _snprintf /*varargs*/
+#else
+#define HDsnprintf              snprintf /*varargs*/
+#endif
+/* sprintf() variable arguments */
+#define HDsqrt(X)               sqrt(X)
+#ifdef H5_HAVE_RAND_R
+H5_DLL void HDsrand(unsigned int seed);
+#define HDsrandom(S)            HDsrand(S)
+#elif H5_HAVE_RANDOM
+#define HDsrand(S)              srandom(S)
+#define HDsrandom(S)            srandom(S)
+#else
+#define HDsrand(S)              srand(S)
+#define HDsrandom(S)            srand(S)
+#endif
+/* sscanf() variable arguments */
+
+#define HDstrcat(X,Y)           strcat(X,Y)
+#define HDstrchr(S,C)           strchr(S,C)
+#define HDstrcmp(X,Y)           strcmp(X,Y)
+#define HDstrcoll(X,Y)          strcoll(X,Y)
+#define HDstrcpy(X,Y)           strcpy(X,Y)
+#define HDstrcspn(X,Y)          strcspn(X,Y)
+#define HDstrerror(N)           strerror(N)
+#define HDstrftime(S,Z,F,T)     strftime(S,Z,F,T)
+#define HDstrlen(S)             strlen(S)
+#define HDstrncat(X,Y,Z)        strncat(X,Y,Z)
+#define HDstrncmp(X,Y,Z)        strncmp(X,Y,Z)
+#define HDstrncpy(X,Y,Z)        strncpy(X,Y,Z)
+#define HDstrpbrk(X,Y)          strpbrk(X,Y)
+#define HDstrrchr(S,C)          strrchr(S,C)
+#define HDstrspn(X,Y)           strspn(X,Y)
+#define HDstrstr(X,Y)           strstr(X,Y)
+#define HDstrtod(S,R)           strtod(S,R)
+#define HDstrtok(X,Y)           strtok(X,Y)
+#define HDstrtol(S,R,N)         strtol(S,R,N)
+H5_DLL int64_t HDstrtoll (const char *s, const char **rest, int base);
+#define HDstrtoul(S,R,N)        strtoul(S,R,N)
+#define HDstrxfrm(X,Y,Z)        strxfrm(X,Y,Z)
+#define HDsysconf(N)            sysconf(N)
+#define HDsystem(S)             system(S)
+#define HDtan(X)                tan(X)
+#define HDtanh(X)               tanh(X)
+#define HDtcdrain(F)            tcdrain(F)
+#define HDtcflow(F,A)           tcflow(F,A)
+#define HDtcflush(F,N)          tcflush(F,N)
+#define HDtcgetattr(F,T)        tcgetattr(F,T)
+#define HDtcgetpgrp(F)          tcgetpgrp(F)
+#define HDtcsendbreak(F,N)      tcsendbreak(F,N)
+#define HDtcsetattr(F,O,T)      tcsetattr(F,O,T)
+#define HDtcsetpgrp(F,N)        tcsetpgrp(F,N)
+#define HDtime(T)               time(T)
+#define HDtimes(T)              times(T)
+#define HDtmpfile()             tmpfile()
+#define HDtmpnam(S)             tmpnam(S)
+#define HDtolower(C)            tolower(C)
+#define HDtoupper(C)            toupper(C)
+#define HDttyname(F)            ttyname(F)
+#define HDtzset()               tzset()
+#define HDumask(N)              umask(N)
+#define HDuname(S)              uname(S)
+#define HDungetc(C,F)           ungetc(C,F)
+#ifdef _WIN32
+#define HDunlink(S)             _unlink(S)
+#else
+#define HDunlink(S)             unlink(S)
+#endif
+#define HDutime(S,T)            utime(S,T)
+#define HDva_arg(A,T)           va_arg(A,T)
+#define HDva_end(A)             va_end(A)
+#define HDva_start(A,P)         va_start(A,P)
+#define HDvasprintf(RET,FMT,A)  vasprintf(RET,FMT,A)
+#define HDvfprintf(F,FMT,A)     vfprintf(F,FMT,A)
+#define HDvprintf(FMT,A)        vprintf(FMT,A)
+#define HDvsprintf(S,FMT,A)     vsprintf(S,FMT,A)
+#ifdef _WIN32
+#   define HDvsnprintf(S,N,FMT,A) _vsnprintf(S,N,FMT,A)
+#else
+#   define HDvsnprintf(S,N,FMT,A) vsnprintf(S,N,FMT,A)
+#endif
+#define HDwait(W)               wait(W)
+#define HDwaitpid(P,W,O)        waitpid(P,W,O)
+#define HDwcstombs(S,P,Z)       wcstombs(S,P,Z)
+#define HDwctomb(S,C)           wctomb(S,C)
+
+#if defined (__MWERKS__)
+/* workaround for a bug in the Metrowerks version 6.0 header file for write
+ which is not defined as const void*
+ */
+#define HDwrite(F,M,Z)          write(F,(void*)M,Z)
+#else
+#define HDwrite(F,M,Z)          write(F,M,Z)
+#endif
+
+/*
+ * And now for a couple non-Posix functions...  Watch out for systems that
+ * define these in terms of macros.
+ */
+#ifdef _WIN32
+#define HDstrdup(S)    _strdup(S)
+#else /* _WIN32 */
+
+#if !defined strdup && !defined H5_HAVE_STRDUP
+extern char *strdup(const char *s);
+#endif
+
+#define HDstrdup(S)     strdup(S)
+
+#endif /* _WIN32 */
+
+/*
+ * HDF Boolean type.
+ */
+#ifndef FALSE
+#   define FALSE 0
+#endif
+#ifndef TRUE
+#   define TRUE 1
+#endif
+
+/*
+ * Although `long long' is part of the revised ANSI-C some compilers don't
+ * support it yet.  We define `long_long' as the longest integral integer type
+ * supported by the compiler, usually 64 bits.	It must be legal to qualify
+ * `long_long' with `unsigned'.
+ */
+#if H5_SIZEOF_LONG_LONG>0
+#   define long_long	long long
+#elif H5_SIZEOF___INT64>0
+#   define long_long	__int64	/*Win32*/
+#   undef H5_SIZEOF_LONG_LONG
+#   define H5_SIZEOF_LONG_LONG H5_SIZEOF___INT64
+#else
+#   define long_long	long int
+#   undef H5_SIZEOF_LONG_LONG
+#   define H5_SIZEOF_LONG_LONG H5_SIZEOF_LONG
+#endif
+
+/** From h5test.h **/
+
+#ifdef H5_HAVE_PARALLEL
+extern MPI_Info h5_io_info_g;         /* MPI INFO object for IO */
+#endif
+
+#ifdef H5_HAVE_PARALLEL
+H5TEST_DLL int h5_set_info_object(void);
+H5TEST_DLL void h5_dump_info_object(MPI_Info info);
+#endif
+
+
+
+/** From h5tools_utils.h **/
+
+extern int         opt_err;     /* getoption prints errors if this is on    */
+extern int         opt_ind;     /* token pointer                            */
+extern const char *opt_arg;     /* flag argument (or value)                 */
+
+
+enum {
+    no_arg = 0,         /* doesn't take an argument     */
+    require_arg,        /* requires an argument	        */
+    optional_arg        /* argument is optional         */
+};
+
+
+typedef struct long_options {
+    const char  *name;          /* name of the long option              */
+    int          has_arg;       /* whether we should look for an arg    */
+    char         shortval;      /* the shortname equivalent of long arg
+                                 * this gets returned from get_option   */
+} long_options;
+
+extern int    get_option(int argc, const char **argv, const char *opt,
+                         const struct long_options *l_opt);
+#endif
diff --git a/perform/sio_timer.c b/perform/sio_timer.c
new file mode 100644
index 0000000..55031ba
--- /dev/null
+++ b/perform/sio_timer.c
@@ -0,0 +1,198 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * Copyright by the Board of Trustees of the University of Illinois.         *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Purpose:
+ *
+ * This is a module of useful timing functions for performance testing.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "sio_timer.h"
+
+
+#include "sio_perf.h"
+
+/*
+ * The number to divide the tv_usec field with to get a nice decimal to add to
+ * the number of seconds.
+ */
+#define MICROSECOND     1000000.0
+
+/* global variables */
+sio_time   *timer_g;            /* timer: global for stub functions     */
+
+/*
+ * Function:  sub_time
+ * Purpose:   Struct two time values, and return the difference, in microseconds
+ *
+ * 	      Note that the function assumes that a > b
+ * Programmer: Leon Arber, 1/27/06
+ */
+static double sub_time(struct timeval* a, struct timeval* b)
+{
+    return (((double)a->tv_sec +
+     ((double)a->tv_usec) / MICROSECOND) -
+	((double)b->tv_sec +
+	 ((double)b->tv_usec) / MICROSECOND));
+}
+
+
+/*
+ * Function:    sio_time_new
+ * Purpose:     Build us a brand, spankin', new performance time object.
+ *              The object is a black box to the user.
+ * Return:      Pointer to sio_time object
+ * Programmer:  Bill Wendling, 01. October 2001
+ * Modifications:
+ */
+sio_time *
+sio_time_new(void)
+{
+    sio_time *pt = (sio_time *)calloc(1, sizeof(struct sio_time_));
+
+    /* set global timer variable */
+    timer_g = pt;
+
+    return pt;
+}
+
+/*
+ * Function:    sio_time_destroy
+ * Purpose:     Remove the memory allocated for the sio_time object. Only
+ *              need to call on a pointer allocated with the ``sio_time_new''
+ *              function.
+ * Return:      Nothing
+ * Programmer:  Bill Wendling, 01. October 2001
+ * Modifications:
+ */
+void
+sio_time_destroy(sio_time *pt)
+{
+    free(pt);
+    /* reset the global timer pointer too. */
+    timer_g = NULL;
+}
+
+
+
+/*
+ * Function:    set_time
+ * Purpose:     Set the time in a ``sio_time'' object.
+ * Return:      Pointer to the passed in ``sio_time'' object.
+ * Programmer:  Bill Wendling, 01. October 2001
+ * Modifications:
+ */
+sio_time *
+set_time(sio_time *pt, timer_type t, int start_stop)
+{
+    if (pt) {
+            if (start_stop == START) {
+                gettimeofday(&pt->sys_timer[t], NULL);
+
+		/* When we start the timer for HDF5_FINE_WRITE_FIXED_DIMS or HDF5_FINE_READ_FIXED_DIMS
+		 * we compute the time it took to only open the file */
+		if(t == HDF5_FINE_WRITE_FIXED_DIMS)
+		    pt->total_time[HDF5_FILE_WRITE_OPEN] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_GROSS_WRITE_FIXED_DIMS]));
+		else if(t == HDF5_FINE_READ_FIXED_DIMS)
+		    pt->total_time[HDF5_FILE_READ_OPEN] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_GROSS_READ_FIXED_DIMS]));
+
+
+            } else {
+                struct timeval sys_t;
+
+                gettimeofday(&sys_t, NULL);
+                pt->total_time[t] += sub_time(&sys_t, &(pt->sys_timer[t]));
+
+/*                    ((double)sys_t.tv_sec +
+                                ((double)sys_t.tv_usec) / MICROSECOND) -
+                    ((double)pt->sys_timer[t].tv_sec +
+                            ((double)pt->sys_timer[t].tv_usec) / MICROSECOND);*/
+
+		/* When we stop the timer for HDF5_GROSS_WRITE_FIXED_DIMS or HDF5_GROSS_READ_FIXED_DIMS
+		 * we compute the time it took to close the file after the last read/write finished */
+		if(t == HDF5_GROSS_WRITE_FIXED_DIMS)
+		    pt->total_time[HDF5_FILE_WRITE_CLOSE] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_FINE_WRITE_FIXED_DIMS]));
+		else if(t == HDF5_GROSS_READ_FIXED_DIMS)
+		    pt->total_time[HDF5_FILE_READ_CLOSE] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_FINE_READ_FIXED_DIMS]));
+
+            }
+
+        if (sio_debug_level >= 4) {
+            const char *msg;
+
+            switch (t) {
+            case HDF5_FILE_OPENCLOSE:
+                msg = "File Open/Close";
+                break;
+            case HDF5_DATASET_CREATE:
+                msg = "Dataset Create";
+                break;
+            case HDF5_MPI_WRITE:
+                msg = "MPI Write";
+                break;
+            case HDF5_MPI_READ:
+                msg = "MPI Read";
+                break;
+            case HDF5_FINE_WRITE_FIXED_DIMS:
+                msg = "Fine Write";
+                break;
+            case HDF5_FINE_READ_FIXED_DIMS:
+                msg = "Fine Read";
+                break;
+            case HDF5_GROSS_WRITE_FIXED_DIMS:
+                msg = "Gross Write";
+                break;
+            case HDF5_GROSS_READ_FIXED_DIMS:
+                msg = "Gross Read";
+                break;
+            case HDF5_RAW_WRITE_FIXED_DIMS:
+                msg = "Raw Write";
+                break;
+            case HDF5_RAW_READ_FIXED_DIMS:
+                msg = "Raw Read";
+                break;
+            default:
+                msg = "Unknown Timer";
+                break;
+            }
+
+            fprintf(output, "    %s %s: %.2f\n", msg,
+                    (start_stop == START ? "Start" : "Stop"),
+                    pt->total_time[t]);
+        }
+    }
+
+    return pt;
+}
+
+/*
+ * Function:    get_time
+ * Purpose:     Get the time from a ``sio_time'' object.
+ * Return:      The number of seconds as a DOUBLE.
+ * Programmer:  Bill Wendling, 01. October 2001
+ * Modifications:
+ */
+double
+get_time(sio_time *pt, timer_type t)
+{
+    return pt->total_time[t];
+}
+#ifdef STANDALONE
+#include "sio_standalone.c"
+#endif
+
diff --git a/perform/sio_timer.h b/perform/sio_timer.h
new file mode 100644
index 0000000..d991be7
--- /dev/null
+++ b/perform/sio_timer.h
@@ -0,0 +1,75 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group.                                               *
+ * Copyright by the Board of Trustees of the University of Illinois.         *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *
+ * terms governing use, modification, and redistribution, is contained in    *
+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *
+ * of the source code distribution tree; Copyright.html can be found at the  *
+ * root level of an installed copy of the electronic HDF5 document set and   *
+ * is linked from the top-level documents page.  It can also be found at     *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
+ * access to either file, you may request a copy from help@hdfgroup.org.     *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+#ifndef SIO_TIMER__
+#define SIO_TIMER__
+
+#include "hdf5.h"
+
+#if defined(H5_TIME_WITH_SYS_TIME)
+#   include <sys/time.h>
+#   include <time.h>
+#elif defined(H5_HAVE_SYS_TIME_H)
+#   include <sys/time.h>
+#else
+#   include <time.h>
+#endif
+
+/* The different types of timers we can have */
+typedef enum timer_type_ {
+    HDF5_FILE_OPENCLOSE,
+    HDF5_DATASET_CREATE,
+    HDF5_MPI_WRITE,
+    HDF5_MPI_READ,
+    HDF5_FILE_READ_OPEN,
+    HDF5_FILE_READ_CLOSE,
+    HDF5_FILE_WRITE_OPEN,
+    HDF5_FILE_WRITE_CLOSE,
+    HDF5_FINE_WRITE_FIXED_DIMS,
+    HDF5_FINE_READ_FIXED_DIMS,
+    HDF5_GROSS_WRITE_FIXED_DIMS,
+    HDF5_GROSS_READ_FIXED_DIMS,
+    HDF5_RAW_WRITE_FIXED_DIMS,
+    HDF5_RAW_READ_FIXED_DIMS,
+    NUM_TIMERS
+} timer_type;
+
+
+/* Miscellaneous identifiers */
+enum {
+    START,          /* Start a specified timer              */
+    STOP            /* Stop a specified timer               */
+};
+
+/* The performance time structure */
+typedef struct sio_time_ {
+    double total_time[NUM_TIMERS];
+    struct timeval sys_timer[NUM_TIMERS];
+} sio_time;
+
+/* External function declarations */
+#ifdef __cplusplus
+extern "C" {
+#endif  /* __cplusplus */
+extern sio_time    *sio_time_new(void);
+extern void         sio_time_destroy(sio_time *pt);
+extern void         set_timer_type(sio_time *pt);
+extern sio_time    *set_time(sio_time *pt, timer_type t, int start_stop);
+extern double       get_time(sio_time *pt, timer_type t);
+#ifdef __cplusplus
+}
+#endif  /* __cplusplus */
+
+#endif  /* SIO_TIMER__ */