[svn-r17042] Updated perf_serial test to work on windows. Bring back from trunk.

Tested:
Windows

31 files changed, 2383 insertions, 229 deletions

diff --git a/perform/Makefile b/perform/Makefile
new file mode 100644
index 0000000..bc0f5d3
--- /dev/null
+++ b/perform/Makefile
@@ -0,0 +1,966 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# perform/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Performance Makefile(.in)
+#
+
+
+pkgdatadir = $(datadir)/hdf5
+pkglibdir = $(libdir)/hdf5
+pkgincludedir = $(includedir)/hdf5
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-unknown-linux-gnu
+host_triplet = x86_64-unknown-linux-gnu
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am COPYING
+bin_PROGRAMS =  \
+	h5perf_serial$(EXEEXT)
+#bin_PROGRAMS = h5perf$(EXEEXT)
+check_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_4)
+TESTS = $(check_PROGRAMS)
+subdir = perform
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/H5config.h
+CONFIG_CLEAN_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+#am__EXEEXT_1 = h5perf$(EXEEXT) \
+#	perf$(EXEEXT)
+#am__EXEEXT_2 = benchpar$(EXEEXT) \
+#	mpi-perf$(EXEEXT)
+#am__EXEEXT_3 = $(am__EXEEXT_2)
+am__EXEEXT_4 = iopipe$(EXEEXT) chunk$(EXEEXT) overhead$(EXEEXT) \
+	zip_perf$(EXEEXT) perf_meta$(EXEEXT) h5perf_serial$(EXEEXT) \
+	$(am__EXEEXT_3)
+PROGRAMS = $(bin_PROGRAMS)
+benchpar_SOURCES = benchpar.c
+benchpar_OBJECTS = benchpar.$(OBJEXT)
+benchpar_LDADD = $(LDADD)
+benchpar_DEPENDENCIES = $(LIBHDF5)
+chunk_SOURCES = chunk.c
+chunk_OBJECTS = chunk.$(OBJEXT)
+chunk_LDADD = $(LDADD)
+chunk_DEPENDENCIES = $(LIBHDF5)
+am_h5perf_OBJECTS = pio_perf.$(OBJEXT) pio_engine.$(OBJEXT) \
+	pio_timer.$(OBJEXT)
+h5perf_OBJECTS = $(am_h5perf_OBJECTS)
+h5perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+am_h5perf_serial_OBJECTS = sio_perf.$(OBJEXT) sio_engine.$(OBJEXT) \
+	sio_timer.$(OBJEXT)
+h5perf_serial_OBJECTS = $(am_h5perf_serial_OBJECTS)
+h5perf_serial_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+iopipe_SOURCES = iopipe.c
+iopipe_OBJECTS = iopipe.$(OBJEXT)
+iopipe_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
+mpi_perf_SOURCES = mpi-perf.c
+mpi_perf_OBJECTS = mpi-perf.$(OBJEXT)
+mpi_perf_LDADD = $(LDADD)
+mpi_perf_DEPENDENCIES = $(LIBHDF5)
+overhead_SOURCES = overhead.c
+overhead_OBJECTS = overhead.$(OBJEXT)
+overhead_LDADD = $(LDADD)
+overhead_DEPENDENCIES = $(LIBHDF5)
+perf_SOURCES = perf.c
+perf_OBJECTS = perf.$(OBJEXT)
+perf_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
+perf_meta_SOURCES = perf_meta.c
+perf_meta_OBJECTS = perf_meta.$(OBJEXT)
+perf_meta_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
+zip_perf_SOURCES = zip_perf.c
+zip_perf_OBJECTS = zip_perf.$(OBJEXT)
+zip_perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+DEFAULT_INCLUDES = -I. -I$(top_builddir)/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \
+	$(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
+	perf_meta.c zip_perf.c
+DIST_SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \
+	$(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \
+	perf_meta.c zip_perf.c
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
+ADD_PARALLEL_FILES = no
+AMTAR = ${SHELL} /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/missing --run tar
+AM_MAKEFLAGS = 
+AR = ar
+
+# Set the paths for AFS installs of autotools for Linux machines
+# Ideally, these tools should never be needed during the build.
+AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
+AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
+AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
+AWK = gawk
+BYTESEX = little-endian
+CC = gcc -fPIC
+CCDEPMODE = depmode=gcc3
+CC_VERSION = /usr/lib64/ccache/gcc -fPIC (gcc-4.3.2)
+
+# H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5,
+# but which shouldn't be exported to h5cc for building other programs.
+CFLAGS =  -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions
+CLEARFILEBUF = yes
+CODESTACK = no
+CONFIG_DATE = Tue Apr 21 10:41:53 CDT 2009
+CONFIG_MODE = production
+CONFIG_USER = abyrne@localhost.localdomain
+CPP = gcc -fPIC -E
+CPPFLAGS = -I/home/abyrne/HDF_Projects/SZIP/szip/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_POSIX_SOURCE -D_BSD_SOURCE    -DNDEBUG -UH5_DEBUG_API
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =   
+CYGPATH_W = echo
+DEBUG_PKG = 
+DEFAULT_API_VERSION = v18
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DEPRECATED_SYMBOLS = yes
+DIRECT_VFD = no
+DSYMUTIL = 
+DUMPBIN = 
+DYNAMIC_DIRS = -R/home/abyrne/HDF_Projects/SZIP/szip/lib 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+EXTERNAL_FILTERS = deflate(zlib),szip(encoder)
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = 
+F9XMODFLAG = 
+F9XSUFFIXFLAG = 
+FC = g95
+FCFLAGS =   
+FCFLAGS_f90 = 
+FCLIBS = 
+FGREP = /bin/grep -F
+FILTERS = shuffle,fletcher32,nbit,scaleoffset
+FSEARCH_DIRS = 
+GPFS = no
+GREP = /bin/grep
+H5_CFLAGS = -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions
+H5_CPPFLAGS =   -DNDEBUG -UH5_DEBUG_API
+H5_CXXFLAGS =  
+H5_FCFLAGS =  
+H5_LONE_COLON = yes
+H5_VERSION = 1.8.2-post13
+HADDR_T = 
+HAVE_DMALLOC = no
+HDF5_HL = yes
+HDF5_INTERFACES =  c++
+HDF_CXX = yes
+HDF_FORTRAN = no
+HID_T = 
+HL = hl
+HL_FOR = 
+HSIZE_T = 
+HSSIZE_T = 
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INSTRUMENT = no
+INSTRUMENT_LIBRARY = no
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -L/home/abyrne/HDF_Projects/SZIP/szip/lib
+LIBOBJS = 
+LIBS =  -lsz -lz -lm 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LINUX_LFS = yes
+LIPO = 
+LL_PATH = /home/abyrne/HDF_Projects/SZIP/szip/lib
+LN_S = ln -s
+LTLIBOBJS = 
+LT_STATIC_EXEC = 
+MAINT = #
+MAKEINFO = ${SHELL} /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/missing --run makeinfo
+MKDIR_P = /bin/mkdir -p
+MPE = no
+MPI_GET_SIZE = 
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJECT_NAMELEN_DEFAULT_F = 
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = hdf5
+PACKAGE_BUGREPORT = help@hdfgroup.org
+PACKAGE_NAME = HDF5
+PACKAGE_STRING = HDF5 1.8.2-post13
+PACKAGE_TARNAME = hdf5
+PACKAGE_VERSION = 1.8.2-post13
+PARALLEL = no
+PATH_SEPARATOR = :
+PERL = perl
+PTHREAD = 
+RANLIB = ranlib
+ROOT = /home/abyrne/HDF_Projects/HDF5-C-1.8
+RUNPARALLEL = 
+RUNSERIAL = 
+R_INTEGER = 
+R_LARGE = 
+SEARCH = VPATH=$(srcdir) $(top_builddir)/src $(top_srcdir)/src
+SED = /bin/sed
+SETX = set -x
+SET_MAKE = 
+SHELL = /bin/sh
+SIZE_T = 
+STATIC_EXEC = no
+STATIC_SHARED = 
+STRICT_FORMAT_CHECKS = no
+STRIP = strip
+TESTPARALLEL = 
+THREADSAFE = no
+TIME = time
+TR = /usr/bin/tr
+TRACE_API = no
+UNAME_INFO = Linux localhost.localdomain 2.6.27.21-170.2.56.fc10.x86_64 #1 SMP Mon Mar 23 23:08:10 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
+USE_FILTER_DEFLATE = yes
+USE_FILTER_FLETCHER32 = yes
+USE_FILTER_NBIT = yes
+USE_FILTER_SCALEOFFSET = yes
+USE_FILTER_SHUFFLE = yes
+USE_FILTER_SZIP = yes
+USINGMEMCHECKER = no
+VERSION = 1.8.2-post13
+WORDS_BIGENDIAN = no
+abs_builddir = /home/abyrne/HDF_Projects/HDF5-C-1.8/perform
+abs_srcdir = /home/abyrne/HDF_Projects/HDF5-C-1.8/perform
+abs_top_builddir = /home/abyrne/HDF_Projects/HDF5-C-1.8
+abs_top_srcdir = /home/abyrne/HDF_Projects/HDF5-C-1.8
+ac_ct_CC = gcc -fPIC
+ac_ct_CXX = 
+ac_ct_DUMPBIN = 
+ac_ct_FC = 
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-unknown-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = unknown
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = ${docdir}
+enable_shared = yes
+enable_static = yes
+exec_prefix = ${prefix}
+host = x86_64-unknown-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = unknown
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = $(SHELL) /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+lt_ECHO = echo
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_builddir = ..
+top_srcdir = ..
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNTESTS instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNTESTS = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = $(bindir)/h5cc
+H5CC_PP = $(bindir)/h5pcc
+H5FC = $(bindir)/h5fc
+H5FC_PP = $(bindir)/h5pfc
+H5CPP = $(bindir)/h5c++
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog
+INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/tools/lib
+#TEST_PROG_PARA = h5perf perf
+
+# Some programs are not built or run by default, but can be built by hand or by
+# specifying --enable-build-all at configure time.
+# Also, some of these programs should only be built in parallel.
+#PARA_BUILD_ALL = benchpar mpi-perf
+#BUILD_ALL_PROGS = $(PARA_BUILD_ALL)
+
+# These are the programs that `make all' or `make tests' will build and which
+# `make check' will run. List them in the order they should be run.
+TEST_PROG = iopipe chunk overhead zip_perf perf_meta h5perf_serial $(BUILD_ALL_PROGS)
+h5perf_SOURCES = pio_perf.c pio_engine.c pio_timer.c
+h5perf_serial_SOURCES = sio_perf.c sio_engine.c sio_timer.c
+
+# These are the files that `make clean' (and derivatives) will remove from
+# this directory.
+CLEANFILES = *.h5 *.raw *.dat x-gnuplot perftest.out
+
+# All of the programs depend on the main hdf5 library, and some of them
+# depend on test or tools library.
+LDADD = $(LIBHDF5)
+h5perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+h5perf_serial_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+perf_LDADD = $(LIBH5TEST) $(LIBHDF5)
+iopipe_LDADD = $(LIBH5TEST) $(LIBHDF5)
+zip_perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+perf_meta_LDADD = $(LIBH5TEST) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  perform/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  perform/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: # $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	     || test -f $$p1 \
+	  ; then \
+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
+	done
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+benchpar$(EXEEXT): $(benchpar_OBJECTS) $(benchpar_DEPENDENCIES) 
+	@rm -f benchpar$(EXEEXT)
+	$(LINK) $(benchpar_OBJECTS) $(benchpar_LDADD) $(LIBS)
+chunk$(EXEEXT): $(chunk_OBJECTS) $(chunk_DEPENDENCIES) 
+	@rm -f chunk$(EXEEXT)
+	$(LINK) $(chunk_OBJECTS) $(chunk_LDADD) $(LIBS)
+h5perf$(EXEEXT): $(h5perf_OBJECTS) $(h5perf_DEPENDENCIES) 
+	@rm -f h5perf$(EXEEXT)
+	$(LINK) $(h5perf_OBJECTS) $(h5perf_LDADD) $(LIBS)
+h5perf_serial$(EXEEXT): $(h5perf_serial_OBJECTS) $(h5perf_serial_DEPENDENCIES) 
+	@rm -f h5perf_serial$(EXEEXT)
+	$(LINK) $(h5perf_serial_OBJECTS) $(h5perf_serial_LDADD) $(LIBS)
+iopipe$(EXEEXT): $(iopipe_OBJECTS) $(iopipe_DEPENDENCIES) 
+	@rm -f iopipe$(EXEEXT)
+	$(LINK) $(iopipe_OBJECTS) $(iopipe_LDADD) $(LIBS)
+mpi-perf$(EXEEXT): $(mpi_perf_OBJECTS) $(mpi_perf_DEPENDENCIES) 
+	@rm -f mpi-perf$(EXEEXT)
+	$(LINK) $(mpi_perf_OBJECTS) $(mpi_perf_LDADD) $(LIBS)
+overhead$(EXEEXT): $(overhead_OBJECTS) $(overhead_DEPENDENCIES) 
+	@rm -f overhead$(EXEEXT)
+	$(LINK) $(overhead_OBJECTS) $(overhead_LDADD) $(LIBS)
+perf$(EXEEXT): $(perf_OBJECTS) $(perf_DEPENDENCIES) 
+	@rm -f perf$(EXEEXT)
+	$(LINK) $(perf_OBJECTS) $(perf_LDADD) $(LIBS)
+perf_meta$(EXEEXT): $(perf_meta_OBJECTS) $(perf_meta_DEPENDENCIES) 
+	@rm -f perf_meta$(EXEEXT)
+	$(LINK) $(perf_meta_OBJECTS) $(perf_meta_LDADD) $(LIBS)
+zip_perf$(EXEEXT): $(zip_perf_OBJECTS) $(zip_perf_DEPENDENCIES) 
+	@rm -f zip_perf$(EXEEXT)
+	$(LINK) $(zip_perf_OBJECTS) $(zip_perf_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/benchpar.Po
+include ./$(DEPDIR)/chunk.Po
+include ./$(DEPDIR)/iopipe.Po
+include ./$(DEPDIR)/mpi-perf.Po
+include ./$(DEPDIR)/overhead.Po
+include ./$(DEPDIR)/perf.Po
+include ./$(DEPDIR)/perf_meta.Po
+include ./$(DEPDIR)/pio_engine.Po
+include ./$(DEPDIR)/pio_perf.Po
+include ./$(DEPDIR)/pio_timer.Po
+include ./$(DEPDIR)/sio_engine.Po
+include ./$(DEPDIR)/sio_perf.Po
+include ./$(DEPDIR)/sio_timer.Po
+include ./$(DEPDIR)/zip_perf.Po
+
+.c.o:
+	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \
+	clean clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool ctags distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-binPROGRAMS
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNTESTS="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/perform/chunk b/perform/chunk
new file mode 100644
index 0000000..e605d08
--- /dev/null
+++ b/perform/chunk
@@ -0,0 +1,148 @@
+#! /bin/sh
+
+# chunk - temporary wrapper script for .libs/chunk
+# Generated by ltmain.sh (GNU libtool) 2.2.6
+#
+# The chunk program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='/bin/sed -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file chunk.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
+
+# This environment variable determines our operation mode.
+if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='2.2.6'
+  notinst_deplibs=' ../src/libhdf5.la'
+else
+  # When we are sourced in execute mode, $file and $ECHO are already set.
+  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+    ECHO="echo"
+    file="$0"
+    # Make sure echo works.
+    if test "X$1" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+      # Yippee, $ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe $ECHO will work.
+      exec /bin/sh "$0" --no-reexec ${1+"$@"}
+    fi
+  fi
+
+  # Find the directory that this script lives in.
+  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+  test "x$thisdir" = "x$file" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
+  while test -n "$file"; do
+    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+
+    # If there was a directory component, then change thisdir.
+    if test "x$destdir" != "x$file"; then
+      case "$destdir" in
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
+      *) thisdir="$thisdir/$destdir" ;;
+      esac
+    fi
+
+    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
+    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
+  done
+
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
+  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
+    # special case for '.'
+    if test "$thisdir" = "."; then
+      thisdir=`pwd`
+    fi
+    # remove .libs from thisdir
+    case "$thisdir" in
+    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
+    .libs )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=`cd "$thisdir" && pwd`
+  test -n "$absdir" && thisdir="$absdir"
+
+  program=lt-'chunk'
+  progdir="$thisdir/.libs"
+
+  if test ! -f "$progdir/$program" ||
+     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
+       test "X$file" != "X$progdir/$program"; }; then
+
+    file="$$-$program"
+
+    if test ! -d "$progdir"; then
+      mkdir "$progdir"
+    else
+      rm -f "$progdir/$file"
+    fi
+
+    # relink executable if necessary
+    if test -n "$relink_command"; then
+      if relink_command_output=`eval $relink_command 2>&1`; then :
+      else
+	echo "$relink_command_output" >&2
+	rm -f "$progdir/$file"
+	exit 1
+      fi
+    fi
+
+    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
+    { rm -f "$progdir/$program";
+      mv -f "$progdir/$file" "$progdir/$program"; }
+    rm -f "$progdir/$file"
+  fi
+
+  if test -f "$progdir/$program"; then
+    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+      # Run the actual program with our arguments.
+
+      exec "$progdir/$program" ${1+"$@"}
+
+      $ECHO "$0: cannot exec $program $*" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
+    $ECHO "This script is just a wrapper for $program." 1>&2
+    echo "See the libtool documentation for more information." 1>&2
+    exit 1
+  fi
+fi
diff --git a/perform/chunk.chkexe b/perform/chunk.chkexe
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/perform/chunk.chkexe
diff --git a/perform/chunk.chklog b/perform/chunk.chklog
new file mode 100644
index 0000000..875bc00
--- /dev/null
+++ b/perform/chunk.chklog
@@ -0,0 +1,50 @@
+============================
+ chunk  Test Log
+============================
+Test       CacheSz  ChunkSz    Effic
+--------- -------- -------- --------
+Rowmaj-rd       25     0.50     1.00
+Rowmaj-rd       25     1.00     1.00
+Rowmaj-rd       25     1.50     0.75
+Rowmaj-rd       25     2.00     1.00
+Rowmaj-rd       25     2.50     0.83
+Rowmaj-rd       25     3.00     1.00
+Rowmaj-rd       25     3.50     0.87
+Rowmaj-rd       25     4.00     1.00
+Rowmaj-rd       25     4.50     0.91
+Rowmaj-rd       25     5.00     1.00
+Rowmaj-wr       25     0.50     0.50
+Rowmaj-wr       25     1.00     1.00
+Rowmaj-wr       25     1.50     0.45
+Rowmaj-wr       25     2.00     1.00
+Rowmaj-wr       25     2.50     0.57
+Rowmaj-wr       25     3.00     1.00
+Rowmaj-wr       25     3.50     0.63
+Rowmaj-wr       25     4.00     1.00
+Rowmaj-wr       25     4.50     0.72
+Rowmaj-wr       25     5.00     1.00
+Diag-rd         25     0.50     0.26
+Diag-rd         25     1.00     0.51
+Diag-rd         25     1.50     0.62
+Diag-rd         25     2.00     1.00
+Diag-rd         25     2.50     0.72
+Diag-rd         25     3.00     0.80
+Diag-rd         25     3.50     0.78
+Diag-rd         25     4.00     1.00
+Diag-rd         25     4.50     0.84
+Diag-rd         25     5.00     0.89
+Diag-wr         25     0.50     0.13
+Diag-wr         25     1.00     0.26
+Diag-wr         25     1.50     0.31
+Diag-wr         25     2.00     1.00
+Diag-wr         25     2.50     0.41
+Diag-wr         25     3.00     0.53
+Diag-wr         25     3.50     0.49
+Diag-wr         25     4.00     1.00
+Diag-wr         25     4.50     0.58
+Diag-wr         25     5.00     0.69
+0.31user 0.12system 0:00.46elapsed 92%CPU (0avgtext+0avgdata 0maxresident)k
+16inputs+7952outputs (0major+9524minor)pagefaults 0swaps
+
+Finished testing chunk 
+============================
diff --git a/perform/chunk.h5 b/perform/chunk.h5
new file mode 100644
index 0000000..26ed19f
--- /dev/null
+++ b/perform/chunk.h5
diff --git a/perform/h5perf_serial b/perform/h5perf_serial
new file mode 100644
index 0000000..06329d0
--- /dev/null
+++ b/perform/h5perf_serial
@@ -0,0 +1,148 @@
+#! /bin/sh
+
+# h5perf_serial - temporary wrapper script for .libs/h5perf_serial
+# Generated by ltmain.sh (GNU libtool) 2.2.6
+#
+# The h5perf_serial program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='/bin/sed -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file sio_perf.o sio_engine.o sio_timer.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../tools/lib/.libs/libh5tools.a ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
+
+# This environment variable determines our operation mode.
+if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='2.2.6'
+  notinst_deplibs=' ../src/libhdf5.la'
+else
+  # When we are sourced in execute mode, $file and $ECHO are already set.
+  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+    ECHO="echo"
+    file="$0"
+    # Make sure echo works.
+    if test "X$1" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+      # Yippee, $ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe $ECHO will work.
+      exec /bin/sh "$0" --no-reexec ${1+"$@"}
+    fi
+  fi
+
+  # Find the directory that this script lives in.
+  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+  test "x$thisdir" = "x$file" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
+  while test -n "$file"; do
+    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+
+    # If there was a directory component, then change thisdir.
+    if test "x$destdir" != "x$file"; then
+      case "$destdir" in
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
+      *) thisdir="$thisdir/$destdir" ;;
+      esac
+    fi
+
+    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
+    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
+  done
+
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
+  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
+    # special case for '.'
+    if test "$thisdir" = "."; then
+      thisdir=`pwd`
+    fi
+    # remove .libs from thisdir
+    case "$thisdir" in
+    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
+    .libs )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=`cd "$thisdir" && pwd`
+  test -n "$absdir" && thisdir="$absdir"
+
+  program=lt-'h5perf_serial'
+  progdir="$thisdir/.libs"
+
+  if test ! -f "$progdir/$program" ||
+     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
+       test "X$file" != "X$progdir/$program"; }; then
+
+    file="$$-$program"
+
+    if test ! -d "$progdir"; then
+      mkdir "$progdir"
+    else
+      rm -f "$progdir/$file"
+    fi
+
+    # relink executable if necessary
+    if test -n "$relink_command"; then
+      if relink_command_output=`eval $relink_command 2>&1`; then :
+      else
+	echo "$relink_command_output" >&2
+	rm -f "$progdir/$file"
+	exit 1
+      fi
+    fi
+
+    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
+    { rm -f "$progdir/$program";
+      mv -f "$progdir/$file" "$progdir/$program"; }
+    rm -f "$progdir/$file"
+  fi
+
+  if test -f "$progdir/$program"; then
+    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+      # Run the actual program with our arguments.
+
+      exec "$progdir/$program" ${1+"$@"}
+
+      $ECHO "$0: cannot exec $program $*" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
+    $ECHO "This script is just a wrapper for $program." 1>&2
+    echo "See the libtool documentation for more information." 1>&2
+    exit 1
+  fi
+fi
diff --git a/perform/h5perf_serial.chkexe b/perform/h5perf_serial.chkexe
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/perform/h5perf_serial.chkexe
diff --git a/perform/h5perf_serial.chklog b/perform/h5perf_serial.chklog
new file mode 100644
index 0000000..d1bef16
--- /dev/null
+++ b/perform/h5perf_serial.chklog
@@ -0,0 +1,56 @@
+============================
+ h5perf_serial  Test Log
+============================
+HDF5 Library: Version 1.8.2-post13
+==== Parameters ====
+IO API=posix hdf5 
+Number of iterations=1
+Dataset size=100 200 
+Transfer buffer size=10 20 
+Dimension access order=1 2 
+HDF5 data storage method=Contiguous
+HDF5 file driver=sec2
+Env HDF5_PREFIX=not set
+==== End of Parameters ====
+
+Transfer Buffer Size (bytes): 200
+File Size(MB): 0.02
+        IO API = POSIX
+            Write (1 iteration(s)):
+                Maximum Throughput:   7.20 MB/s
+                Average Throughput:   7.20 MB/s
+                Minimum Throughput:   7.20 MB/s
+            Write Open-Close (1 iteration(s)):
+                Maximum Throughput:   7.09 MB/s
+                Average Throughput:   7.09 MB/s
+                Minimum Throughput:   7.09 MB/s
+            Read (1 iteration(s)):
+                Maximum Throughput:  18.81 MB/s
+                Average Throughput:  18.81 MB/s
+                Minimum Throughput:  18.81 MB/s
+            Read Open-Close (1 iteration(s)):
+                Maximum Throughput:  18.68 MB/s
+                Average Throughput:  18.68 MB/s
+                Minimum Throughput:  18.68 MB/s
+        IO API = HDF5
+            Write (1 iteration(s)):
+                Maximum Throughput:  18.13 MB/s
+                Average Throughput:  18.13 MB/s
+                Minimum Throughput:  18.13 MB/s
+            Write Open-Close (1 iteration(s)):
+                Maximum Throughput:   5.67 MB/s
+                Average Throughput:   5.67 MB/s
+                Minimum Throughput:   5.67 MB/s
+            Read (1 iteration(s)):
+                Maximum Throughput:  30.72 MB/s
+                Average Throughput:  30.72 MB/s
+                Minimum Throughput:  30.72 MB/s
+            Read Open-Close (1 iteration(s)):
+                Maximum Throughput:  13.86 MB/s
+                Average Throughput:  13.86 MB/s
+                Minimum Throughput:  13.86 MB/s
+0.03user 0.01system 0:00.10elapsed 50%CPU (0avgtext+0avgdata 0maxresident)k
+88inputs+232outputs (0major+7732minor)pagefaults 0swaps
+
+Finished testing h5perf_serial 
+============================
diff --git a/perform/iopipe b/perform/iopipe
new file mode 100644
index 0000000..c596b24
--- /dev/null
+++ b/perform/iopipe
@@ -0,0 +1,148 @@
+#! /bin/sh
+
+# iopipe - temporary wrapper script for .libs/iopipe
+# Generated by ltmain.sh (GNU libtool) 2.2.6
+#
+# The iopipe program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='/bin/sed -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file iopipe.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
+
+# This environment variable determines our operation mode.
+if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='2.2.6'
+  notinst_deplibs=' ../src/libhdf5.la'
+else
+  # When we are sourced in execute mode, $file and $ECHO are already set.
+  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+    ECHO="echo"
+    file="$0"
+    # Make sure echo works.
+    if test "X$1" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+      # Yippee, $ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe $ECHO will work.
+      exec /bin/sh "$0" --no-reexec ${1+"$@"}
+    fi
+  fi
+
+  # Find the directory that this script lives in.
+  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+  test "x$thisdir" = "x$file" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
+  while test -n "$file"; do
+    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+
+    # If there was a directory component, then change thisdir.
+    if test "x$destdir" != "x$file"; then
+      case "$destdir" in
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
+      *) thisdir="$thisdir/$destdir" ;;
+      esac
+    fi
+
+    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
+    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
+  done
+
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
+  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
+    # special case for '.'
+    if test "$thisdir" = "."; then
+      thisdir=`pwd`
+    fi
+    # remove .libs from thisdir
+    case "$thisdir" in
+    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
+    .libs )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=`cd "$thisdir" && pwd`
+  test -n "$absdir" && thisdir="$absdir"
+
+  program=lt-'iopipe'
+  progdir="$thisdir/.libs"
+
+  if test ! -f "$progdir/$program" ||
+     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
+       test "X$file" != "X$progdir/$program"; }; then
+
+    file="$$-$program"
+
+    if test ! -d "$progdir"; then
+      mkdir "$progdir"
+    else
+      rm -f "$progdir/$file"
+    fi
+
+    # relink executable if necessary
+    if test -n "$relink_command"; then
+      if relink_command_output=`eval $relink_command 2>&1`; then :
+      else
+	echo "$relink_command_output" >&2
+	rm -f "$progdir/$file"
+	exit 1
+      fi
+    fi
+
+    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
+    { rm -f "$progdir/$program";
+      mv -f "$progdir/$file" "$progdir/$program"; }
+    rm -f "$progdir/$file"
+  fi
+
+  if test -f "$progdir/$program"; then
+    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+      # Run the actual program with our arguments.
+
+      exec "$progdir/$program" ${1+"$@"}
+
+      $ECHO "$0: cannot exec $program $*" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
+    $ECHO "This script is just a wrapper for $program." 1>&2
+    echo "See the libtool documentation for more information." 1>&2
+    exit 1
+  fi
+fi
diff --git a/perform/iopipe.chkexe b/perform/iopipe.chkexe
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/perform/iopipe.chkexe
diff --git a/perform/iopipe.chklog b/perform/iopipe.chklog
new file mode 100644
index 0000000..583e8f6
--- /dev/null
+++ b/perform/iopipe.chklog
@@ -0,0 +1,24 @@
+============================
+ iopipe  Test Log
+============================
+fill raw        =============================================
+fill hdf5       =============================================
+out raw         =============================================
+out hdf5        =============================================
+in raw          =============================================
+in hdf5         =============================================
+in hdf5 partial =============================================
+I/O request size is 1000000.0MB
+Before getrusage() call
+fill raw        0.01user 0.00system 0.01elapsed 3245.99MB/s
+fill hdf5       0.00user 0.00system 0.01elapsed 7754.61MB/s
+out raw         0.00user 0.02system 0.02elapsed 2195.15MB/s
+out hdf5        0.00user 0.02system 0.02elapsed 2154.40MB/s
+in raw          0.00user 0.02system 0.02elapsed 2468.22MB/s
+in hdf5         0.00user 0.01system 0.01elapsed 5232.41MB/s
+in hdf5 partial 0.02user 0.01system 0.03elapsed 1619.29MB/s
+0.09user 0.30system 0:02.44elapsed 16%CPU (0avgtext+0avgdata 0maxresident)k
+264inputs+4024outputs (2major+16447minor)pagefaults 0swaps
+
+Finished testing iopipe 
+============================
diff --git a/perform/iopipe.h5 b/perform/iopipe.h5
new file mode 100644
index 0000000..1048f34
--- /dev/null
+++ b/perform/iopipe.h5
diff --git a/perform/iopipe.raw b/perform/iopipe.raw
new file mode 100644
index 0000000..7c2624a
--- /dev/null
+++ b/perform/iopipe.raw
diff --git a/perform/overhead b/perform/overhead
new file mode 100644
index 0000000..4373671
--- /dev/null
+++ b/perform/overhead
@@ -0,0 +1,148 @@
+#! /bin/sh
+
+# overhead - temporary wrapper script for .libs/overhead
+# Generated by ltmain.sh (GNU libtool) 2.2.6
+#
+# The overhead program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='/bin/sed -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file overhead.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
+
+# This environment variable determines our operation mode.
+if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='2.2.6'
+  notinst_deplibs=' ../src/libhdf5.la'
+else
+  # When we are sourced in execute mode, $file and $ECHO are already set.
+  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+    ECHO="echo"
+    file="$0"
+    # Make sure echo works.
+    if test "X$1" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+      # Yippee, $ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe $ECHO will work.
+      exec /bin/sh "$0" --no-reexec ${1+"$@"}
+    fi
+  fi
+
+  # Find the directory that this script lives in.
+  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+  test "x$thisdir" = "x$file" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
+  while test -n "$file"; do
+    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+
+    # If there was a directory component, then change thisdir.
+    if test "x$destdir" != "x$file"; then
+      case "$destdir" in
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
+      *) thisdir="$thisdir/$destdir" ;;
+      esac
+    fi
+
+    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
+    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
+  done
+
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
+  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
+    # special case for '.'
+    if test "$thisdir" = "."; then
+      thisdir=`pwd`
+    fi
+    # remove .libs from thisdir
+    case "$thisdir" in
+    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
+    .libs )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=`cd "$thisdir" && pwd`
+  test -n "$absdir" && thisdir="$absdir"
+
+  program=lt-'overhead'
+  progdir="$thisdir/.libs"
+
+  if test ! -f "$progdir/$program" ||
+     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
+       test "X$file" != "X$progdir/$program"; }; then
+
+    file="$$-$program"
+
+    if test ! -d "$progdir"; then
+      mkdir "$progdir"
+    else
+      rm -f "$progdir/$file"
+    fi
+
+    # relink executable if necessary
+    if test -n "$relink_command"; then
+      if relink_command_output=`eval $relink_command 2>&1`; then :
+      else
+	echo "$relink_command_output" >&2
+	rm -f "$progdir/$file"
+	exit 1
+      fi
+    fi
+
+    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
+    { rm -f "$progdir/$program";
+      mv -f "$progdir/$file" "$progdir/$program"; }
+    rm -f "$progdir/$file"
+  fi
+
+  if test -f "$progdir/$program"; then
+    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+      # Run the actual program with our arguments.
+
+      exec "$progdir/$program" ${1+"$@"}
+
+      $ECHO "$0: cannot exec $program $*" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
+    $ECHO "This script is just a wrapper for $program." 1>&2
+    echo "See the libtool documentation for more information." 1>&2
+    exit 1
+  fi
+fi
diff --git a/perform/overhead.chkexe b/perform/overhead.chkexe
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/perform/overhead.chkexe
diff --git a/perform/overhead.chklog b/perform/overhead.chklog
new file mode 100644
index 0000000..c2e61d2
--- /dev/null
+++ b/perform/overhead.chklog
@@ -0,0 +1,15 @@
+============================
+ overhead  Test Log
+============================
+Style   Bytes/Chunk
+-----   -----------
+forward   41.320
+reverse   43.416
+inward    70.664
+outward   41.320
+random    53.896
+0.11user 0.05system 0:00.23elapsed 74%CPU (0avgtext+0avgdata 0maxresident)k
+16inputs+600outputs (0major+7761minor)pagefaults 0swaps
+
+Finished testing overhead 
+============================
diff --git a/perform/perf_meta b/perform/perf_meta
new file mode 100644
index 0000000..4ce87eb
--- /dev/null
+++ b/perform/perf_meta
@@ -0,0 +1,148 @@
+#! /bin/sh
+
+# perf_meta - temporary wrapper script for .libs/perf_meta
+# Generated by ltmain.sh (GNU libtool) 2.2.6
+#
+# The perf_meta program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='/bin/sed -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file perf_meta.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
+
+# This environment variable determines our operation mode.
+if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='2.2.6'
+  notinst_deplibs=' ../src/libhdf5.la'
+else
+  # When we are sourced in execute mode, $file and $ECHO are already set.
+  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+    ECHO="echo"
+    file="$0"
+    # Make sure echo works.
+    if test "X$1" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+      # Yippee, $ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe $ECHO will work.
+      exec /bin/sh "$0" --no-reexec ${1+"$@"}
+    fi
+  fi
+
+  # Find the directory that this script lives in.
+  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+  test "x$thisdir" = "x$file" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
+  while test -n "$file"; do
+    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+
+    # If there was a directory component, then change thisdir.
+    if test "x$destdir" != "x$file"; then
+      case "$destdir" in
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
+      *) thisdir="$thisdir/$destdir" ;;
+      esac
+    fi
+
+    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
+    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
+  done
+
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
+  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
+    # special case for '.'
+    if test "$thisdir" = "."; then
+      thisdir=`pwd`
+    fi
+    # remove .libs from thisdir
+    case "$thisdir" in
+    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
+    .libs )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=`cd "$thisdir" && pwd`
+  test -n "$absdir" && thisdir="$absdir"
+
+  program=lt-'perf_meta'
+  progdir="$thisdir/.libs"
+
+  if test ! -f "$progdir/$program" ||
+     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
+       test "X$file" != "X$progdir/$program"; }; then
+
+    file="$$-$program"
+
+    if test ! -d "$progdir"; then
+      mkdir "$progdir"
+    else
+      rm -f "$progdir/$file"
+    fi
+
+    # relink executable if necessary
+    if test -n "$relink_command"; then
+      if relink_command_output=`eval $relink_command 2>&1`; then :
+      else
+	echo "$relink_command_output" >&2
+	rm -f "$progdir/$file"
+	exit 1
+      fi
+    fi
+
+    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
+    { rm -f "$progdir/$program";
+      mv -f "$progdir/$file" "$progdir/$program"; }
+    rm -f "$progdir/$file"
+  fi
+
+  if test -f "$progdir/$program"; then
+    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+      # Run the actual program with our arguments.
+
+      exec "$progdir/$program" ${1+"$@"}
+
+      $ECHO "$0: cannot exec $program $*" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
+    $ECHO "This script is just a wrapper for $program." 1>&2
+    echo "See the libtool documentation for more information." 1>&2
+    exit 1
+  fi
+fi
diff --git a/perform/perf_meta.chkexe b/perform/perf_meta.chkexe
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/perform/perf_meta.chkexe
diff --git a/perform/perf_meta.chklog b/perform/perf_meta.chklog
new file mode 100644
index 0000000..14c8e37
--- /dev/null
+++ b/perform/perf_meta.chklog
@@ -0,0 +1,23 @@
+============================
+ perf_meta  Test Log
+============================
+		Performance result of metadata for datasets and attributes
+
+1.  Create 8 attributes for each of 16 existing datasets
+	H5Dopen2:		avg=0.000022s;	max=0.000039s;	min=0.000019s
+	H5Dclose:		avg=0.000066s;	max=0.000905s;	min=0.000009s
+	H5A(create & close):	avg=0.000029s;	max=0.002232s;	min=0.000008s
+2.  Create 8 attributes for each of 16 new datasets
+	H5Dcreate2:		avg=0.000025s;	max=0.000035s;	min=0.000021s
+	H5Dclose:		avg=0.000002s;	max=0.000003s;	min=0.000002s
+	H5A(create & close):	avg=0.000010s;	max=0.000020s;	min=0.000008s
+3.  Create 2 attributes for each of 16 existing datasets for 4 times
+	H5Dopen2:		avg=0.000065s;	max=0.002824s;	min=0.000019s
+	H5Dclose:		avg=0.000009s;	max=0.000012s;	min=0.000008s
+	H5A(create & close):	avg=0.000013s;	max=0.000022s;	min=0.000009s
+All metadata performance tests passed.
+0.03user 0.02system 0:00.15elapsed 37%CPU (0avgtext+0avgdata 0maxresident)k
+32inputs+976outputs (0major+7823minor)pagefaults 0swaps
+
+Finished testing perf_meta 
+============================
diff --git a/perform/sio_engine.c b/perform/sio_engine.c
index d4e7ad3..8e792bd 100644
--- a/perform/sio_engine.c
+++ b/perform/sio_engine.c
@@ -21,7 +21,9 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <fcntl.h>
-#include <unistd.h>
+#ifdef H5_HAVE_UNISTD_H
+#	include <unistd.h>
+#endif
 #include <errno.h>
 
 #include "hdf5.h"
@@ -227,7 +229,7 @@ do_sio(parameters param)
      */
     /* Open file for write */
 
-    strcpy(base_name, "#sio_tmp");
+    HDstrcpy(base_name, "#sio_tmp");
     sio_create_filename(iot, base_name, fname, sizeof(fname), &param);
 
     if (sio_debug_level > 0)
@@ -335,7 +337,7 @@ sio_create_filename(iotype iot, const char *base_name, char *fullname, size_t si
     }
 
     /* First use the environment variable and then try the constant */
-    prefix = getenv("HDF5_PREFIX");
+    prefix = HDgetenv("HDF5_PREFIX");
 
 #ifdef HDF5_PREFIX
     if (!prefix)
@@ -349,8 +351,8 @@ sio_create_filename(iotype iot, const char *base_name, char *fullname, size_t si
      * directory instead. */
     register char *user, *login, *subdir;
 
-    user = getenv("USER");
-    login = getenv("LOGIN");
+    user = HDgetenv("USER");
+    login = HDgetenv("LOGIN");
     subdir = (user ? user : login);
 
     if (subdir) {
@@ -363,24 +365,24 @@ sio_create_filename(iotype iot, const char *base_name, char *fullname, size_t si
         fullname[i] = subdir[j];
     } else {
         /* We didn't append the prefix yet */
-        strncpy(fullname, prefix, MIN(strlen(prefix), size));
+        HDstrncpy(fullname, prefix, MIN(HDstrlen(prefix), size));
     }
 
-    if ((strlen(fullname) + strlen(base_name) + 1) < size) {
+    if ((HDstrlen(fullname) + HDstrlen(base_name) + 1) < size) {
         /* Append the base_name with a slash first. Multiple slashes are
          * handled below. */
         h5_stat_t buf;
 
         if (HDstat(fullname, &buf) < 0)
         /* The directory doesn't exist just yet */
-        if (mkdir(fullname, (mode_t)0755) < 0 && errno != EEXIST) {
+        if (HDmkdir(fullname, 0755) < 0 && errno != EEXIST) {
             /* We couldn't make the "/tmp/${USER,LOGIN}" subdirectory.
              * Default to PREFIX's original prefix value. */
-            strcpy(fullname, prefix);
+            HDstrcpy(fullname, prefix);
         }
 
-        strcat(fullname, "/");
-        strcat(fullname, base_name);
+        HDstrcat(fullname, "/");
+        HDstrcat(fullname, base_name);
     } else {
         /* Buffer is too small */
         return NULL;
@@ -389,19 +391,19 @@ sio_create_filename(iotype iot, const char *base_name, char *fullname, size_t si
     /* Buffer is too small */
         return NULL;
     } else {
-        strcpy(fullname, base_name);
+        HDstrcpy(fullname, base_name);
     }
 
     /* Append a suffix */
     if (suffix) {
-        if (strlen(fullname) + strlen(suffix) >= size)
+        if (HDstrlen(fullname) + HDstrlen(suffix) >= size)
             return NULL;
 
-        strcat(fullname, suffix);
+        HDstrcat(fullname, suffix);
     }
 
     /* Remove any double slashes in the filename */
-    for (ptr = fullname, i = j = 0; ptr && i < size; i++, ptr++) {
+    for (ptr = fullname, i = j = 0; ptr && (i < size); i++, ptr++) {
     if (*ptr != '/' || last != '/')
         fullname[j++] = *ptr;
 
@@ -537,14 +539,14 @@ do_write(results *res, file_descr *fd, parameters *parms, void *buffer)
             h5dset_space_id, H5P_DEFAULT, h5dcpl, H5P_DEFAULT);
 
         if (h5ds_id < 0) {
-            fprintf(stderr, "HDF5 Dataset Create failed\n");
+            HDfprintf(stderr, "HDF5 Dataset Create failed\n");
             GOTOERROR(FAIL);
         }
 
         hrc = H5Pclose(h5dcpl);
         /* verifying the close of the dcpl */
         if (hrc < 0) {
-            fprintf(stderr, "HDF5 Property List Close failed\n");
+            HDfprintf(stderr, "HDF5 Property List Close failed\n");
             GOTOERROR(FAIL);
         }
 
@@ -841,7 +843,7 @@ do_read(results *res, file_descr *fd, parameters *parms, void *buffer)
         sprintf(dname, "Dataset_%ld", parms->num_bytes);
         h5ds_id = H5Dopen2(fd->h5fd, dname, H5P_DEFAULT);
         if (h5ds_id < 0) {
-            fprintf(stderr, "HDF5 Dataset open failed\n");
+            HDfprintf(stderr, "HDF5 Dataset open failed\n");
             GOTOERROR(FAIL);
         }
 
@@ -1048,7 +1050,7 @@ do_fopen(parameters *param, char *fname, file_descr *fd /*out*/, int flags)
             fd->posixfd = POSIXOPEN(fname, O_RDONLY);
 
         if (fd->posixfd < 0 ) {
-            fprintf(stderr, "POSIX File Open failed(%s)\n", fname);
+            HDfprintf(stderr, "POSIX File Open failed(%s)\n", fname);
             GOTOERROR(FAIL);
         }
 
@@ -1129,7 +1131,7 @@ set_vfd(parameters *param)
         HDmemset(memb_name, 0, sizeof memb_name);
         HDmemset(memb_addr, 0, sizeof memb_addr);
 
-        assert(HDstrlen(multi_letters)==H5FD_MEM_NTYPES);
+        HDassert(HDstrlen(multi_letters)==H5FD_MEM_NTYPES);
         for (mt=H5FD_MEM_DEFAULT; mt<H5FD_MEM_NTYPES; H5_INC_ENUM(H5FD_mem_t,mt)) {
             memb_fapl[mt] = H5P_DEFAULT;
             sprintf(sv[mt], "%%s-%c.h5", multi_letters[mt]);
@@ -1220,7 +1222,7 @@ do_cleanupfile(iotype iot, char *filename)
     hid_t       driver;
 
     if (clean_file_g == -1)
-    clean_file_g = (getenv("HDF5_NOCLEANUP")==NULL) ? 1 : 0;
+    clean_file_g = (HDgetenv("HDF5_NOCLEANUP")==NULL) ? 1 : 0;
 
     if (clean_file_g){
 
diff --git a/perform/sio_perf.c b/perform/sio_perf.c
index 5b97667..d852a45 100644
--- a/perform/sio_perf.c
+++ b/perform/sio_perf.c
@@ -353,7 +353,7 @@ main(int argc, char **argv)
     }
 
     if (opts->output_file) {
-        if ((output = fopen(opts->output_file, "w")) == NULL) {
+        if ((output = HDfopen(opts->output_file, "w")) == NULL) {
             fprintf(stderr, "%s: cannot open output file\n", progname);
             perror(opts->output_file);
             goto finish;
@@ -918,7 +918,7 @@ report_parameters(struct options *opts)
     }
 
     {
-        char *prefix = getenv("HDF5_PREFIX");
+        char *prefix = HDgetenv("HDF5_PREFIX");
 
         HDfprintf(output, "Env HDF5_PREFIX=%s\n",
                   (prefix ? prefix : "not set"));
@@ -992,9 +992,9 @@ parse_command_line(int argc, char *argv[])
                         if (isalnum(*end) && i < 10)
                             buf[i++] = *end;
 
-                    if (!strcasecmp(buf, "hdf5")) {
+                    if (!HDstrcasecmp(buf, "hdf5")) {
                         cl_opts->io_types |= SIO_HDF5;
-                    } else if (!strcasecmp(buf, "posix")) {
+                    } else if (!HDstrcasecmp(buf, "posix")) {
                         cl_opts->io_types |= SIO_POSIX;
                     } else {
                         fprintf(stderr, "sio_perf: invalid --api option %s\n",
@@ -1145,19 +1145,19 @@ parse_command_line(int argc, char *argv[])
             cl_opts->h5_threshold = parse_size_directive(opt_arg);
             break;
         case 'v':
-            if (!strcasecmp(opt_arg, "sec2")) {
+            if (!HDstrcasecmp(opt_arg, "sec2")) {
                 cl_opts->vfd=sec2;
-            } else if (!strcasecmp(opt_arg, "stdio")) {
+            } else if (!HDstrcasecmp(opt_arg, "stdio")) {
                 cl_opts->vfd=stdio;
-            } else if (!strcasecmp(opt_arg, "core")) {
+            } else if (!HDstrcasecmp(opt_arg, "core")) {
                 cl_opts->vfd=core;
-            } else if (!strcasecmp(opt_arg, "split")) {
+            } else if (!HDstrcasecmp(opt_arg, "split")) {
                 cl_opts->vfd=split;
-            } else if (!strcasecmp(opt_arg, "multi")) {
+            } else if (!HDstrcasecmp(opt_arg, "multi")) {
                 cl_opts->vfd=multi;
-            } else if (!strcasecmp(opt_arg, "family")) {
+            } else if (!HDstrcasecmp(opt_arg, "family")) {
                 cl_opts->vfd=family;
-            } else if (!strcasecmp(opt_arg, "direct")) {
+            } else if (!HDstrcasecmp(opt_arg, "direct")) {
                 cl_opts->vfd=direct;
             } else {
                 fprintf(stderr, "sio_perf: invalid --api option %s\n",
diff --git a/perform/sio_timer.c b/perform/sio_timer.c
index cce4f4b..f188a10 100644
--- a/perform/sio_timer.c
+++ b/perform/sio_timer.c
@@ -1,197 +1,197 @@
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- * Copyright by The HDF Group.                                               *
- * All rights reserved.                                                      *
- *                                                                           *
- * This file is part of HDF5.  The full HDF5 copyright notice, including     *
- * terms governing use, modification, and redistribution, is contained in    *
- * the files COPYING and Copyright.html.  COPYING can be found at the root   *
- * of the source code distribution tree; Copyright.html can be found at the  *
- * root level of an installed copy of the electronic HDF5 document set and   *
- * is linked from the top-level documents page.  It can also be found at     *
- * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
- * access to either file, you may request a copy from help@hdfgroup.org.     *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-
-/*
- * Purpose:
- *
- * This is a module of useful timing functions for performance testing.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "sio_timer.h"
-
-
-#include "sio_perf.h"
-
-/*
- * The number to divide the tv_usec field with to get a nice decimal to add to
- * the number of seconds.
- */
-#define MICROSECOND     1000000.0
-
-/* global variables */
-sio_time   *timer_g;            /* timer: global for stub functions     */
-
-/*
- * Function:  sub_time
- * Purpose:   Struct two time values, and return the difference, in microseconds
- *
- * 	      Note that the function assumes that a > b
- * Programmer: Leon Arber, 1/27/06
- */
-static double sub_time(struct timeval* a, struct timeval* b)
-{
-    return (((double)a->tv_sec +
-     ((double)a->tv_usec) / MICROSECOND) -
-	((double)b->tv_sec +
-	 ((double)b->tv_usec) / MICROSECOND));
-}
-
-
-/*
- * Function:    sio_time_new
- * Purpose:     Build us a brand, spankin', new performance time object.
- *              The object is a black box to the user.
- * Return:      Pointer to sio_time object
- * Programmer:  Bill Wendling, 01. October 2001
- * Modifications:
- */
-sio_time *
-sio_time_new(void)
-{
-    sio_time *pt = (sio_time *)calloc(1, sizeof(struct sio_time_));
-
-    /* set global timer variable */
-    timer_g = pt;
-
-    return pt;
-}
-
-/*
- * Function:    sio_time_destroy
- * Purpose:     Remove the memory allocated for the sio_time object. Only
- *              need to call on a pointer allocated with the ``sio_time_new''
- *              function.
- * Return:      Nothing
- * Programmer:  Bill Wendling, 01. October 2001
- * Modifications:
- */
-void
-sio_time_destroy(sio_time *pt)
-{
-    free(pt);
-    /* reset the global timer pointer too. */
-    timer_g = NULL;
-}
-
-
-
-/*
- * Function:    set_time
- * Purpose:     Set the time in a ``sio_time'' object.
- * Return:      Pointer to the passed in ``sio_time'' object.
- * Programmer:  Bill Wendling, 01. October 2001
- * Modifications:
- */
-sio_time *
-set_time(sio_time *pt, timer_type t, int start_stop)
-{
-    if (pt) {
-            if (start_stop == START) {
-                gettimeofday(&pt->sys_timer[t], NULL);
-
-		/* When we start the timer for HDF5_FINE_WRITE_FIXED_DIMS or HDF5_FINE_READ_FIXED_DIMS
-		 * we compute the time it took to only open the file */
-		if(t == HDF5_FINE_WRITE_FIXED_DIMS)
-		    pt->total_time[HDF5_FILE_WRITE_OPEN] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_GROSS_WRITE_FIXED_DIMS]));
-		else if(t == HDF5_FINE_READ_FIXED_DIMS)
-		    pt->total_time[HDF5_FILE_READ_OPEN] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_GROSS_READ_FIXED_DIMS]));
-
-
-            } else {
-                struct timeval sys_t;
-
-                gettimeofday(&sys_t, NULL);
-                pt->total_time[t] += sub_time(&sys_t, &(pt->sys_timer[t]));
-
-/*                    ((double)sys_t.tv_sec +
-                                ((double)sys_t.tv_usec) / MICROSECOND) -
-                    ((double)pt->sys_timer[t].tv_sec +
-                            ((double)pt->sys_timer[t].tv_usec) / MICROSECOND);*/
-
-		/* When we stop the timer for HDF5_GROSS_WRITE_FIXED_DIMS or HDF5_GROSS_READ_FIXED_DIMS
-		 * we compute the time it took to close the file after the last read/write finished */
-		if(t == HDF5_GROSS_WRITE_FIXED_DIMS)
-		    pt->total_time[HDF5_FILE_WRITE_CLOSE] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_FINE_WRITE_FIXED_DIMS]));
-		else if(t == HDF5_GROSS_READ_FIXED_DIMS)
-		    pt->total_time[HDF5_FILE_READ_CLOSE] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_FINE_READ_FIXED_DIMS]));
-
-            }
-
-        if (sio_debug_level >= 4) {
-            const char *msg;
-
-            switch (t) {
-            case HDF5_FILE_OPENCLOSE:
-                msg = "File Open/Close";
-                break;
-            case HDF5_DATASET_CREATE:
-                msg = "Dataset Create";
-                break;
-            case HDF5_MPI_WRITE:
-                msg = "MPI Write";
-                break;
-            case HDF5_MPI_READ:
-                msg = "MPI Read";
-                break;
-            case HDF5_FINE_WRITE_FIXED_DIMS:
-                msg = "Fine Write";
-                break;
-            case HDF5_FINE_READ_FIXED_DIMS:
-                msg = "Fine Read";
-                break;
-            case HDF5_GROSS_WRITE_FIXED_DIMS:
-                msg = "Gross Write";
-                break;
-            case HDF5_GROSS_READ_FIXED_DIMS:
-                msg = "Gross Read";
-                break;
-            case HDF5_RAW_WRITE_FIXED_DIMS:
-                msg = "Raw Write";
-                break;
-            case HDF5_RAW_READ_FIXED_DIMS:
-                msg = "Raw Read";
-                break;
-            default:
-                msg = "Unknown Timer";
-                break;
-            }
-
-            fprintf(output, "    %s %s: %.2f\n", msg,
-                    (start_stop == START ? "Start" : "Stop"),
-                    pt->total_time[t]);
-        }
-    }
-
-    return pt;
-}
-
-/*
- * Function:    get_time
- * Purpose:     Get the time from a ``sio_time'' object.
- * Return:      The number of seconds as a DOUBLE.
- * Programmer:  Bill Wendling, 01. October 2001
- * Modifications:
- */
-double
-get_time(sio_time *pt, timer_type t)
-{
-    return pt->total_time[t];
-}
-#ifdef STANDALONE
-#include "sio_standalone.c"
-#endif
-
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

+ * Copyright by The HDF Group.                                               *

+ * All rights reserved.                                                      *

+ *                                                                           *

+ * This file is part of HDF5.  The full HDF5 copyright notice, including     *

+ * terms governing use, modification, and redistribution, is contained in    *

+ * the files COPYING and Copyright.html.  COPYING can be found at the root   *

+ * of the source code distribution tree; Copyright.html can be found at the  *

+ * root level of an installed copy of the electronic HDF5 document set and   *

+ * is linked from the top-level documents page.  It can also be found at     *

+ * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *

+ * access to either file, you may request a copy from help@hdfgroup.org.     *

+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

+

+/*

+ * Purpose:

+ *

+ * This is a module of useful timing functions for performance testing.

+ */

+

+#include <stdio.h>

+#include <stdlib.h>

+

+#include "sio_timer.h"

+

+

+#include "sio_perf.h"

+

+/*

+ * The number to divide the tv_usec field with to get a nice decimal to add to

+ * the number of seconds.

+ */

+#define MICROSECOND     1000000.0

+

+/* global variables */

+sio_time   *timer_g;            /* timer: global for stub functions     */

+

+/*

+ * Function:  sub_time

+ * Purpose:   Struct two time values, and return the difference, in microseconds

+ *

+ * 	      Note that the function assumes that a > b

+ * Programmer: Leon Arber, 1/27/06

+ */

+static double sub_time(struct timeval* a, struct timeval* b)

+{

+    return (((double)a->tv_sec +

+     ((double)a->tv_usec) / MICROSECOND) -

+	((double)b->tv_sec +

+	 ((double)b->tv_usec) / MICROSECOND));

+}

+

+

+/*

+ * Function:    sio_time_new

+ * Purpose:     Build us a brand, spankin', new performance time object.

+ *              The object is a black box to the user.

+ * Return:      Pointer to sio_time object

+ * Programmer:  Bill Wendling, 01. October 2001

+ * Modifications:

+ */

+sio_time *

+sio_time_new(void)

+{

+    sio_time *pt = (sio_time *)calloc(1, sizeof(struct sio_time_));

+

+    /* set global timer variable */

+    timer_g = pt;

+

+    return pt;

+}

+

+/*

+ * Function:    sio_time_destroy

+ * Purpose:     Remove the memory allocated for the sio_time object. Only

+ *              need to call on a pointer allocated with the ``sio_time_new''

+ *              function.

+ * Return:      Nothing

+ * Programmer:  Bill Wendling, 01. October 2001

+ * Modifications:

+ */

+void

+sio_time_destroy(sio_time *pt)

+{

+    free(pt);

+    /* reset the global timer pointer too. */

+    timer_g = NULL;

+}

+

+

+

+/*

+ * Function:    set_time

+ * Purpose:     Set the time in a ``sio_time'' object.

+ * Return:      Pointer to the passed in ``sio_time'' object.

+ * Programmer:  Bill Wendling, 01. October 2001

+ * Modifications:

+ */

+sio_time *

+set_time(sio_time *pt, timer_type t, int start_stop)

+{

+    if (pt) {

+            if (start_stop == START) {

+                HDgettimeofday(&pt->sys_timer[t], NULL);

+

+		/* When we start the timer for HDF5_FINE_WRITE_FIXED_DIMS or HDF5_FINE_READ_FIXED_DIMS

+		 * we compute the time it took to only open the file */

+		if(t == HDF5_FINE_WRITE_FIXED_DIMS)

+		    pt->total_time[HDF5_FILE_WRITE_OPEN] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_GROSS_WRITE_FIXED_DIMS]));

+		else if(t == HDF5_FINE_READ_FIXED_DIMS)

+		    pt->total_time[HDF5_FILE_READ_OPEN] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_GROSS_READ_FIXED_DIMS]));

+

+

+            } else {

+                struct timeval sys_t;

+

+                HDgettimeofday(&sys_t, NULL);

+                pt->total_time[t] += sub_time(&sys_t, &(pt->sys_timer[t]));

+

+/*                    ((double)sys_t.tv_sec +

+                                ((double)sys_t.tv_usec) / MICROSECOND) -

+                    ((double)pt->sys_timer[t].tv_sec +

+                            ((double)pt->sys_timer[t].tv_usec) / MICROSECOND);*/

+

+		/* When we stop the timer for HDF5_GROSS_WRITE_FIXED_DIMS or HDF5_GROSS_READ_FIXED_DIMS

+		 * we compute the time it took to close the file after the last read/write finished */

+		if(t == HDF5_GROSS_WRITE_FIXED_DIMS)

+		    pt->total_time[HDF5_FILE_WRITE_CLOSE] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_FINE_WRITE_FIXED_DIMS]));

+		else if(t == HDF5_GROSS_READ_FIXED_DIMS)

+		    pt->total_time[HDF5_FILE_READ_CLOSE] += sub_time(&(pt->sys_timer[t]), &(pt->sys_timer[HDF5_FINE_READ_FIXED_DIMS]));

+

+            }

+

+        if (sio_debug_level >= 4) {

+            const char *msg;

+

+            switch (t) {

+            case HDF5_FILE_OPENCLOSE:

+                msg = "File Open/Close";

+                break;

+            case HDF5_DATASET_CREATE:

+                msg = "Dataset Create";

+                break;

+            case HDF5_MPI_WRITE:

+                msg = "MPI Write";

+                break;

+            case HDF5_MPI_READ:

+                msg = "MPI Read";

+                break;

+            case HDF5_FINE_WRITE_FIXED_DIMS:

+                msg = "Fine Write";

+                break;

+            case HDF5_FINE_READ_FIXED_DIMS:

+                msg = "Fine Read";

+                break;

+            case HDF5_GROSS_WRITE_FIXED_DIMS:

+                msg = "Gross Write";

+                break;

+            case HDF5_GROSS_READ_FIXED_DIMS:

+                msg = "Gross Read";

+                break;

+            case HDF5_RAW_WRITE_FIXED_DIMS:

+                msg = "Raw Write";

+                break;

+            case HDF5_RAW_READ_FIXED_DIMS:

+                msg = "Raw Read";

+                break;

+            default:

+                msg = "Unknown Timer";

+                break;

+            }

+

+            fprintf(output, "    %s %s: %.2f\n", msg,

+                    (start_stop == START ? "Start" : "Stop"),

+                    pt->total_time[t]);

+        }

+    }

+

+    return pt;

+}

+

+/*

+ * Function:    get_time

+ * Purpose:     Get the time from a ``sio_time'' object.

+ * Return:      The number of seconds as a DOUBLE.

+ * Programmer:  Bill Wendling, 01. October 2001

+ * Modifications:

+ */

+double

+get_time(sio_time *pt, timer_type t)

+{

+    return pt->total_time[t];

+}

+#ifdef STANDALONE

+#include "sio_standalone.c"

+#endif

+

diff --git a/perform/sio_timer.h b/perform/sio_timer.h
index 445a02e..943ce28 100644
--- a/perform/sio_timer.h
+++ b/perform/sio_timer.h
@@ -26,6 +26,10 @@
 #   include <time.h>
 #endif
 
+#ifdef _WIN32
+#	include <winsock.h>
+#endif /* _WIN32 */
+
 /* The different types of timers we can have */
 typedef enum timer_type_ {
     HDF5_FILE_OPENCLOSE,
diff --git a/perform/x-diag-rd.dat b/perform/x-diag-rd.dat
new file mode 100644
index 0000000..f5588f6
--- /dev/null
+++ b/perform/x-diag-rd.dat
@@ -0,0 +1,11 @@
+0.5 0.256466
+1 0.508621
+1.5 0.625
+2 1
+2.5 0.71875
+3 0.801887
+3.5 0.77877
+4 1
+4.5 0.840372
+5 0.892857
+
diff --git a/perform/x-diag-wr.dat b/perform/x-diag-wr.dat
new file mode 100644
index 0000000..d3e86b1
--- /dev/null
+++ b/perform/x-diag-wr.dat
@@ -0,0 +1,11 @@
+0.5 0.128233
+1 0.256522
+1.5 0.314748
+2 1
+2.5 0.410714
+3 0.53125
+3.5 0.485767
+4 1
+4.5 0.578488
+5 0.690955
+
diff --git a/perform/x-gnuplot b/perform/x-gnuplot
new file mode 100644
index 0000000..c6d8f44
--- /dev/null
+++ b/perform/x-gnuplot
@@ -0,0 +1,44 @@
+set yrange [0:1.2]
+set ytics 0, 0.1, 1
+set xlabel "Request size as a fraction of chunk size"
+set ylabel "Efficiency"
+set title "Cache 25 chunks, w0=0.75, Size=(total=2000, chunk=100)"
+set terminal postscript
+set output "x-rowmaj-rd.ps"
+plot "x-rowmaj-rd.dat" title "RowMaj-Read" with lines
+set terminal x11
+replot
+pause -1
+set yrange [0:1.2]
+set ytics 0, 0.1, 1
+set xlabel "Request size as a fraction of chunk size"
+set ylabel "Efficiency"
+set title "Cache 25 chunks,w0=0.75, Size=(total=2000, chunk=100)"
+set terminal postscript
+set output "x-rowmaj-wr.ps"
+plot "x-rowmaj-wr.dat" title "RowMaj-Write" with lines
+set terminal x11
+replot
+pause -1
+set yrange [0:1.2]
+set ytics 0, 0.1, 1
+set xlabel "Request size as a fraction of chunk size"
+set ylabel "Efficiency"
+set title "Cache 25 chunks,w0=0.75, Size=(total=2000, chunk=100)"
+set terminal postscript
+set output "x-diag-rd.ps"
+plot "x-diag-rd.dat" title "Diag-Read" with lines
+set terminal x11
+replot
+pause -1
+set yrange [0:1.2]
+set ytics 0, 0.1, 1
+set xlabel "Request size as a fraction of chunk size"
+set ylabel "Efficiency"
+set title "Cache 25 chunks, w0=0.75, Size=(total=2000, chunk=100)"
+set terminal postscript
+set output "x-diag-wr.ps"
+plot "x-diag-wr.dat" title "Diag-Write" with lines
+set terminal x11
+replot
+pause -1
diff --git a/perform/x-rowmaj-rd.dat b/perform/x-rowmaj-rd.dat
new file mode 100644
index 0000000..43c1bcb
--- /dev/null
+++ b/perform/x-rowmaj-rd.dat
@@ -0,0 +1,11 @@
+0.5 1
+1 1
+1.5 0.750469
+2 1
+2.5 0.833333
+3 1
+3.5 0.869565
+4 1
+4.5 0.909091
+5 1
+
diff --git a/perform/x-rowmaj-wr.dat b/perform/x-rowmaj-wr.dat
new file mode 100644
index 0000000..600859b
--- /dev/null
+++ b/perform/x-rowmaj-wr.dat
@@ -0,0 +1,11 @@
+0.5 0.5
+1 1
+1.5 0.445931
+2 1
+2.5 0.568182
+3 1
+3.5 0.633914
+4 1
+4.5 0.719424
+5 1
+
diff --git a/perform/zip_perf b/perform/zip_perf
new file mode 100644
index 0000000..22213f6
--- /dev/null
+++ b/perform/zip_perf
@@ -0,0 +1,148 @@
+#! /bin/sh
+
+# zip_perf - temporary wrapper script for .libs/zip_perf
+# Generated by ltmain.sh (GNU libtool) 2.2.6
+#
+# The zip_perf program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='/bin/sed -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file zip_perf.o  -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../tools/lib/.libs/libh5tools.a ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)"
+
+# This environment variable determines our operation mode.
+if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='2.2.6'
+  notinst_deplibs=' ../src/libhdf5.la'
+else
+  # When we are sourced in execute mode, $file and $ECHO are already set.
+  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+    ECHO="echo"
+    file="$0"
+    # Make sure echo works.
+    if test "X$1" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+      # Yippee, $ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe $ECHO will work.
+      exec /bin/sh "$0" --no-reexec ${1+"$@"}
+    fi
+  fi
+
+  # Find the directory that this script lives in.
+  thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+  test "x$thisdir" = "x$file" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
+  while test -n "$file"; do
+    destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'`
+
+    # If there was a directory component, then change thisdir.
+    if test "x$destdir" != "x$file"; then
+      case "$destdir" in
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
+      *) thisdir="$thisdir/$destdir" ;;
+      esac
+    fi
+
+    file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'`
+    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
+  done
+
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
+  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
+    # special case for '.'
+    if test "$thisdir" = "."; then
+      thisdir=`pwd`
+    fi
+    # remove .libs from thisdir
+    case "$thisdir" in
+    *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;;
+    .libs )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=`cd "$thisdir" && pwd`
+  test -n "$absdir" && thisdir="$absdir"
+
+  program=lt-'zip_perf'
+  progdir="$thisdir/.libs"
+
+  if test ! -f "$progdir/$program" ||
+     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
+       test "X$file" != "X$progdir/$program"; }; then
+
+    file="$$-$program"
+
+    if test ! -d "$progdir"; then
+      mkdir "$progdir"
+    else
+      rm -f "$progdir/$file"
+    fi
+
+    # relink executable if necessary
+    if test -n "$relink_command"; then
+      if relink_command_output=`eval $relink_command 2>&1`; then :
+      else
+	echo "$relink_command_output" >&2
+	rm -f "$progdir/$file"
+	exit 1
+      fi
+    fi
+
+    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
+    { rm -f "$progdir/$program";
+      mv -f "$progdir/$file" "$progdir/$program"; }
+    rm -f "$progdir/$file"
+  fi
+
+  if test -f "$progdir/$program"; then
+    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+      # Run the actual program with our arguments.
+
+      exec "$progdir/$program" ${1+"$@"}
+
+      $ECHO "$0: cannot exec $program $*" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
+    $ECHO "This script is just a wrapper for $program." 1>&2
+    echo "See the libtool documentation for more information." 1>&2
+    exit 1
+  fi
+fi
diff --git a/perform/zip_perf.chkexe b/perform/zip_perf.chkexe
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/perform/zip_perf.chkexe
diff --git a/perform/zip_perf.chklog b/perform/zip_perf.chklog
new file mode 100644
index 0000000..156146f
--- /dev/null
+++ b/perform/zip_perf.chklog
@@ -0,0 +1,38 @@
+============================
+ zip_perf  Test Log
+============================
+Filesize: 67108864
+Compression Level: 6
+Buffer size == 128KB
+	Uncompressed Write Time: 0.14s
+	Uncompressed Write Throughput: 474.05MB/s
+	Compression Ratio: 0.00113678
+	Compressed Write Time: 0.75s
+	Compressed Write Throughput: 85.06MB/s
+	Compression Time: 0.738815s
+Buffer size == 256KB
+	Uncompressed Write Time: 0.12s
+	Uncompressed Write Throughput: 556.16MB/s
+	Compression Ratio: 0.00105667
+	Compressed Write Time: 0.74s
+	Compressed Write Throughput: 86.99MB/s
+	Compression Time: 0.733302s
+Buffer size == 512KB
+	Uncompressed Write Time: 0.12s
+	Uncompressed Write Throughput: 547.23MB/s
+	Compression Ratio: 0.0010128
+	Compressed Write Time: 0.76s
+	Compressed Write Throughput: 84.15MB/s
+	Compression Time: 0.758976s
+Buffer size == 1MB
+	Uncompressed Write Time: 0.12s
+	Uncompressed Write Throughput: 540.06MB/s
+	Compression Ratio: 0.000990868
+	Compressed Write Time: 0.76s
+	Compressed Write Throughput: 84.04MB/s
+	Compression Time: 0.760352s
+2.94user 0.63system 0:03.75elapsed 95%CPU (0avgtext+0avgdata 0maxresident)k
+32inputs+528768outputs (0major+34635minor)pagefaults 0swaps
+
+Finished testing zip_perf 
+============================