Removed trailing whitespace from source files.

1 files changed, 31 insertions, 31 deletions

diff --git a/release_docs/HISTORY-1_10.txt b/release_docs/HISTORY-1_10.txt
index 19381a3..96e073c 100644
--- a/release_docs/HISTORY-1_10.txt
+++ b/release_docs/HISTORY-1_10.txt
@@ -16,7 +16,7 @@ This file contains development history of the HDF5 1.10 branch
 
 %%%%1.10.6%%%%
 
-HDF5 version 1.10.6 released on 2019-12-23 
+HDF5 version 1.10.6 released on 2019-12-23
 ================================================================================
 
 
@@ -157,12 +157,12 @@ New Features
 
     Library:
     --------
-    - Added S3 and HDFS Virtual File Drivers (VFDs) to HDF5 
-      
+    - Added S3 and HDFS Virtual File Drivers (VFDs) to HDF5
+
       These new VFDs have been introduced in HDF5-1.10.6.  Instructions to
       enable them when configuring HDF5 on Linux and Mac may be found at
       https://portal.hdfgroup.org/display/HDF5/Virtual+File+Drivers+-+S3+and+HDFS.
-      
+
       Installing on Windows requires CMake 3.13 and the following additional setup.
             Install openssl library (with dev files);
             from "Shining Light Productions". msi package preferred.
@@ -295,15 +295,15 @@ Bug Fixes since HDF5-1.10.5 release
     - Fixed an issue when creating a file with non-default file space info
       together with library high bound setting to H5F_LIBVER_V18.
 
-      When setting non-default file space info in fcpl via 
-      H5Pset_file_space_strategy() and then creating a file with both high and 
-      low library bounds set to H5F_LIBVER_V18 in fapl, the library succeeds in 
-      creating the file.  File creation should fail because the feature of 
-      setting non-default file space info does not exist in library release 1.8 
+      When setting non-default file space info in fcpl via
+      H5Pset_file_space_strategy() and then creating a file with both high and
+      low library bounds set to H5F_LIBVER_V18 in fapl, the library succeeds in
+      creating the file.  File creation should fail because the feature of
+      setting non-default file space info does not exist in library release 1.8
       or earlier.
 
-      This was fixed by setting and checking the proper version in the file 
-      space info message based on the library low and high bounds when creating 
+      This was fixed by setting and checking the proper version in the file
+      space info message based on the library low and high bounds when creating
       and opening the HDF5 file.
 
       (VC - 2019/6/25, HDFFV-10808)
@@ -510,7 +510,7 @@ The following configurations are not supported but have been tested for this rel
     (kite)                        Intel icc/icpc/ifort version 17.0.2
 
     Windows 7 x64                 Visual Studio 2008
-    
+
 
 Known Problems
 ==============
@@ -533,9 +533,9 @@ Known Problems
     Parallel builds using OpenMPI 3.03 or later and romio fail several tests
     with collective writes or compression that will not fail when ompio is used
     instead of romio.  This can be done by adding "--mca io ompio" to the mpirun
-    command.  For example, in autotools builds RUNPARALLEL can be set to 
+    command.  For example, in autotools builds RUNPARALLEL can be set to
     "mpirun --mca io ompio -n 6" provided ompio is installed.
-              
+
     CPP ptable test fails on VS2017 with Intel compiler, JIRA issue: HDFFV-10628.
     This test will pass with VS2015 with Intel compiler.
 
@@ -650,8 +650,8 @@ New Features
     - Cross compile on mutrino and other Cray XC40 systems.
 
       Added support for CMake options to use CrayLinuxEnvironment, craype-mic-knl
-      module for building with craype-haswell module for configuration, and 
-      batch scripts in bin/batch for use with sbatch or bsub to run tests in 
+      module for building with craype-haswell module for configuration, and
+      batch scripts in bin/batch for use with sbatch or bsub to run tests in
       batch jobs on compute nodes.  An instruction file README_HPC describing
       the use of these options was added in release_docs.
 
@@ -1421,7 +1421,7 @@ Bug Fixes since HDF5-1.10.3 release
     Java Library:
     ----------------
     - JNI native library dependencies
-    
+
       The build for the hdf5_java native library used the wrong
       hdf5 target library for CMake builds. Correcting the hdf5_java
       library to build with the shared hdf5 library required testing
@@ -1578,7 +1578,7 @@ The following platforms are not supported but have been tested for this release.
     #1 SMP x86_64 GNU/Linux          Version 4.8.5 20150623 (Red Hat 4.8.5-4)
     (jelly)                       with NAG Fortran Compiler Release 6.1(Tozai)
                                   GCC Version 7.1.0
-                                  OpenMPI 3.0.0-GCC-7.2.0-2.29, 
+                                  OpenMPI 3.0.0-GCC-7.2.0-2.29,
                                      3.1.0-GCC-7.2.0-2.29
                                   Intel(R) C (icc) and C++ (icpc) compilers
                                      Version 17.0.0.098 Build 20160721
@@ -4491,7 +4491,7 @@ This release supports the following features:
 
     - Version 3 Metadata Cache
 
-      The version 3 metadata cache moves management of metadata I/O from 
+      The version 3 metadata cache moves management of metadata I/O from
       the clients to the metadata cache proper.  This change is essential for
       SWMR and other features that have yet to be released.
 
@@ -4552,7 +4552,7 @@ This release supports the following features:
     - New Public Functions: H5PTget_dataset and H5PTget_type
 
       Two accessor functions have been added. H5PTget_dataset returns
-      the identifier of the dataset associated with the packet table, 
+      the identifier of the dataset associated with the packet table,
       and H5PTget_type returns the identifier of the datatype used by
       the packet table.
 
@@ -4678,28 +4678,28 @@ Issues Addressed in this Release Since 1.10.0
 
      - Configure fails to detect valid real KINDs on FreeBSD 9.3 (i386) with Fortran enabled.
 
-       Fixed. Added the exponential option to SELECTED_REAL_KIND to distinguish 
+       Fixed. Added the exponential option to SELECTED_REAL_KIND to distinguish
        KINDs of same precision
        (MSB - 2016/05/14,HDFFV-9912)
 
 
      - Corrected the f90 H5AWRITE_F integer interface's buf to be INTENT(IN).
-       (MSB - 2016/05/14) 
+       (MSB - 2016/05/14)
 
      - Configure fails in sed command on FreeBSD 9.3 (i386) with Fortran enabled.
-  
+
        Fixed.
        (MSB - 2016/05/14,HDFFV-9912)
 
      - Compile time error in H5f90global.F90 with IBM XL Fortran 14.1.0.13 on BG/Q with Fortran
        enabled.
-    
+
        Fixed.
        (MSB - 2016/05/16,HDFFV-9917)
 
      - A cmake build with Fortran enabled does not install module h5fortkit
 
-       Fixed. 
+       Fixed.
        (MSB - 2016/05/23,HDFFV-9923)
 
 
@@ -5203,7 +5203,7 @@ This release supports the following features:
 
     - Version 3 Metadata Cache
 
-      The version 3 metadata cache moves management of metadata I/O from 
+      The version 3 metadata cache moves management of metadata I/O from
       the clients to the metadata cache proper.  This change is essential for
       SWMR and other features that have yet to be released.
 
@@ -5264,7 +5264,7 @@ This release supports the following features:
     - New Public Functions: H5PTget_dataset and H5PTget_type
 
       Two accessor functions have been added. H5PTget_dataset returns
-      the identifier of the dataset associated with the packet table, 
+      the identifier of the dataset associated with the packet table,
       and H5PTget_type returns the identifier of the datatype used by
       the packet table.
 
@@ -5665,16 +5665,16 @@ known issues if it is a new issue.
  - When building HDF5 with Java using CMake and specifying Debug for CMAKE_BUILD_TYPE,
    there is a missing command argument for the tests of the examples.
 
-   This error can be avoided by not building Java with Debug, HDF5_BUILD_JAVA:BOOL=OFF, 
+   This error can be avoided by not building Java with Debug, HDF5_BUILD_JAVA:BOOL=OFF,
    or not building Examples, HDF5_BUILD_EXAMPLES:BOOL=OFF.
-   (LRK - 2016/03/30, HDFFV-9743) 
+   (LRK - 2016/03/30, HDFFV-9743)
 
- - The H5Lexists API changed behavior in HDF5-1.10 when used with a file handle 
+ - The H5Lexists API changed behavior in HDF5-1.10 when used with a file handle
    and root group name ("/"):
 
    H5Lexists(fileid, "/")
 
-   In HDF5-1.8 it returns false (0) and in HDF5-1.10 it returns true (1). 
+   In HDF5-1.8 it returns false (0) and in HDF5-1.10 it returns true (1).
    The documentation will be updated with information regarding this change.
    (LRK - 2016/03/30, HDFFV-8746)