[svn-r9503] Purpose:

Update windows installation document on 1.7 branch.

Description:

Solution:

Platforms tested:

Misc. update:

1 files changed, 1050 insertions, 409 deletions

diff --git a/release_docs/INSTALL_Windows.txt b/release_docs/INSTALL_Windows.txt
index 125d2f2..c0403b9 100644
--- a/release_docs/INSTALL_Windows.txt
+++ b/release_docs/INSTALL_Windows.txt
@@ -1,451 +1,986 @@
-HDF5 Build and Install Instructions for Windows 2000/XP.
-----------------------------------------------------------
+HDF5 Build and Install Instructions for Windows 2000/XP (Full Version)
+------------------------------------------------------------------------
 
-The instructions which follow assume that you will be using the 
-source code release 'zip' file (hdf5-160.zip).
+The following instructions assume that the HDF5 source code package from
+HDF website (http://hdf.ncsa.uiuc.edu) is used.
 
-***************************WARNINGS****************************
-Please read CAREFULLY about Preconditions before you go to the 
-following sections
+
+***************************WARNINGS*************************************
+Please read CAREFULLY about the following preconditions and notes first.
 
 Preconditions 
 
-   1. Installed MicroSoft Developer Studio,Visual C++ 6.0 and 
-      WinZip.
+   1. Installed Microsoft Visual C++ 6.0 or Intel C compiler and WinZip.
+       
+      1.1 Installed DEC Visual Fortran compiler(6.0 or higher version), 
+          or Intel Fortran compiler if you want to build HDF5 Fortran
+          libraries.    
 
-   2. Set up a directory structure to unpack the library. 
-      For example:
+      Note: By default, WinZip will convert the Unix end of line format
+            when extracting .tar file.  This conversion will cause
+            "false" failure in some HDF5 tools testings.
+ 
+            Please uncheck the "TAR file smart CR/LF conversion" option
+            in your WinZip to prevent the conversion when extracting
+            .tar file.
 
-	    c:\					(any drive)
-	   MyHDFstuff\				(any folder name)
+            To uncheck the "TAR file smart CR/LF conversion" option:
 
-   3. Download the hdf5-1.* distribution archive and use WinZip to
-      extract the hdf5 package into c:\MyHDFstuff.  This creates a 
-      directory called 'hdf5-1.*' under MyHDFstuff which contains
-      several files and directories. Rename "hdf5-1.*" to "hdf5".  
+            Invoke WinZip, go to "Options", select "Configuration..."
 
-   4. HDF5 uses zlib for compression and zlib is NOT distributed 
-      with hdf5 lib in 1.6.0 release. You have to install your own
-      zlib library or you may go to HDF web site
-	(ftp://ftp.ncsa.uiuc.edu/HDF/gzip/) 
-      to download the correponding zlib library by yourself. If you 
-      want to build HDF5 library without using zlib, please read section V.
+            Click the "Miscellaneous" tab and uncheck "TAR file smart
+            CR/LF conversion" option, then click OK.
 
-   5. HDF5 uses szlib(szip) for compression and szlib is distributed with hdf5 lib
-      in 1.6.0 release. You can also download szlib source codes and binaries from
-      ftp://ftp.ncsa.uiuc.edu/HDF/szip/windows/
-      If you want to build HDF5 library without using szlib, please read
-      section V.
+   2. Set up a directory structure to unpack the library.  For example:
 
-   6. HDF4-related tools are not built and released with HDF5 library
-      packages any more. To obtain HDF4-related tools, please check
-      http://hdf.ncsa.uiuc.edu/h4toh5/ and ftp://hdf.ncsa.uiuc.edu/HDF5/h4toh5/
+	        c:\                              (any drive)
+	        MyHDFstuff\                      (any folder name)
 
-   7. For .NET users, please go to section VI.
+   3. Download the hdf5-1.6.x source code package and use WinZip to 
+      extract the HDF5 package into c:\MyHDFstuff.  This creates a 
+      directory called 'hdf5-1.6.x' under MyHDFstuff which contains 
+      several files and directories.  Rename "hdf5-1.6.x" to "hdf5".  
 
-   8. For DLL users, please do read and follow "DLL hints" at Section IV.
+   4. HDF5 provide options to do in-memory compress within HDF5
+      library.  Currently, two external compression libraries Zlib and
+      Szlib can be used with HDF5.
 
-   9. For users who would like to build, test and use HDF5 snapshot release, please
-      read Section VII.
+      4.1 HDF5 uses Zlib version 1.1.4 for compression and Zlib is NOT
+          distributed with HDF5 lib in 1.6.x release. To use Zlib 
+          library, you have to install your own Zlib library or go to
+          HDF web site
+          (ftp://ftp.ncsa.uiuc.edu/HDF/gzip/bin/windows/zlib114/) 
+          to download the Zlib library.
+      
+      4.2 HDF5 uses Szlib(Szip) for compression and Szlib compression
+          software is provided with HDF5 products starting from 1.6.0
+          release.  You can download Szlib source codes and binaries
+          from ftp://ftp.ncsa.uiuc.edu/HDF/szip/bin/windows.
+          Please note that Szip is not a totally open-source free
+          software.  For licensing issue of Szip, please check 
+          "Licensing terms" at
+          http://hdf.ncsa.uiuc.edu/doc_resource/SZIP/index.html.
+
+      Compression feature inside HDF5 is optional. 
+      
+   5. Define the following environment variables: 
 
+        HDF5_EXT_ZLIB
+        HDF5_EXT_SZIP
+        HDF5_SZIP_ENCODE
+        HDF5_EXT_ZLIB_DLL
+        HDF5_EXT_SZIP_DLL
+      
+      In this section, Zlib and Szip compression software are assumed
+      to be used.  Please read section V as well as this section if you
+      do not want to use compression feature inside HDF5.
+      
+      To define these environment variables:
+      
+      Click "Start", click "Control Panel", and then double-click
+      "System".  On the "Advanced" tab, click "Environment Variables".
+      
+      If you are logged on as administrator to the local computer AND
+      want to let all other users use these two environment variables,
+      click "New" under "System Variables" box; otherwise, click "New"
+      under "User Variables" box.
+      
+      In the New Variable window, set "Variable name" as HDF5_EXT_ZLIB
+      and "Variable value" as zlib.lib, then click OK.
+      
+      Similarly, you can set:
+
+      HDF5_EXT_SZIP environment variable as szlib.lib
+      HDF5_SZIP_ENCODE environment variable as 1
+      HDF5_EXT_ZLIB_DLL environment variable as c:\zlib114\dll\zlib.lib
+      HDF5_EXT_SZIP_DLL environment variable as szlibdll.lib.
+
+      Notes:
+
+         a. When setting environment variables, only include path for
+            the Zlib DLL library, as the Zlib static and DLL libraries
+            share the same name --  zlib.lib.  For all other
+            environment variables, you MUST NOT include the path.
+            Otherwise, some of HDF5 tools tests will get unexpected
+            results.
+
+         b. If the Zlib DLL library path is not c:\zlib114\dll, replace
+            it with the correct path in the HDF5_EXT_ZLIB_DLL
+            environment variable.
+
+         c. You might have to close and reopen running programs for
+            the new environment variable settings to take effect. 
+
+         d. By default, c:\zlib114\dll\zlib.dll and 
+            c:\szlib\dll\szibdll.dll should be copied into the location
+            that the application can find, one suggestion is to use the 
+            c:\WINNT\system or c:\WINDOWS\system directory before
+            using DLLs.
+      
+   6. Set up path for external libraries and headers
+    
+      Skip this part if you don't want to use ANY compression feature
+      provided by HDF5.  Please do read section V.
 
----------------------------------------------------------------
+      You have to read this part even if you want to only use Zlib
+      or Szlib.  You also need to read section V.
 
-The following sections discuss installation procedures in detail:
+      Invoke Microsoft Visual C++ and go to "Tools" and select
+      "Options", find "Directories";
+      
+      6.1 Find the box "Show directories for", choose 
+          "Include files",
+          If you cannot find your Zlib and Szlib header path
+          (for example, c:\zlib114\include, c:\szlib\include)
+          from the directory list, add the header path
+          (c:\zlib114\include, c:\szlib\include) to the 
+          included directories.
+      
+      6.2 Find the box "Show directories for", choose "Library files",
+          If you cannot find your Zlib and Szlib library path
+          (for example, c:\zlib114\lib, c:\szlib\lib, c:\szlib\dll)
+          from the directory list, add the library path
+          (c:\zlib114\lib, c:\szlib\lib, c:\szlib\dll) to the
+          library directories.
+      
+Notes
 
-  Section I:  What do we build and install
-  Section II: Building and testing hdf5 libraries and non-hdf4 
-              related hdf5 tools 
-               tools
-  Section III: Building an application using the HDF5 library or 
-              DLL
-  Section IV: Some more helpful pointers
-  Section V:  Disable gzip compression  
-  Section VI: How to build in HDF5 in VS 7.0(.NET) 
-  Section VII: Build and test HDF5 snapshot release
-  Section VIII: Misc. 
+   1. To build HDF5 C++ and FORTRAN libraries, please read through
+      this document.
+   
+   2. For users who want to quickly build HDF5 library or do not 
+      want to know HDF5 building and installation details, please 
+      read INSATLL_Windows_Short.txt.
 
+   3. For users who would like to build and test HDF5 package from the 
+      command line, please read INSATLL_Windows_From_Command_Line.txt.
+   
+   4. HDF4-related tools are not built and released with HDF5 library
+      packages any more. To obtain HDF4-related tools, please check
+      http://hdf.ncsa.uiuc.edu/h4toh5/ and 
+      ftp://hdf.ncsa.uiuc.edu/HDF5/h4toh5/
 
-***************************************************************
+   5. For DLL users, please do read and follow "DLL hints"
+      at Section IV.
 
-Section I:
+   6. For .NET users, please read section VI.
 
-What do we build and install? 
+   7. For users who would like to build, test and use HDF5 snapshot
+      release, please read Section VII.
 
- HDF5 static library: 
-	debug and release version
+------------------------------------------------------------------------
 
- HDF5 Dynamic Link Library(DLL): 
-	debug and release version as well as export libraries for
-      DLL
+The following sections discuss installation procedures in detail:
 
- HDF5 tool library:
-	debug and release version
+   Section I:    What do we build and install
+   Section II:   How to build and test HDF5 libraries and tools 
+   Section III:  How to build an application using the HDF5 library 
+                 or DLL
+   Section IV:   Helpful pointers
+   Section V:    How to disable Gzip(Zlib)/Szip compression  
+   Section VI:   How to build in HDF5 in VS 7.0(.NET) 
+   Section VII:  How to build and test HDF5 snapshot release
+   Section VIII: Misc. 
 
- HDF5 tool export library for DLL:
-	debug and release version 
+************************************************************************
 
- HDF5 tools:
-	non-hdf4 related tools 
+Section I: What do we build and install? 
+========================================================================
 
- HDF5 library testing programs:
-      hdf5 library comprehensive tests
-		
- HDF5 related tools testing programs:
-	hdf5 tools testing programs
+   1. Build and Install
 
+      HDF5 static library: 
+           debug and release version
 
-NOTE: ** We use zlib 1.1.4 for both binary and source
-	release.
-      **
+      HDF5 Dynamic Link Library(DLL): 
+           debug and release version as well as export libraries for DLL
 
-**************************************************************
+      HDF5 tools:
+           HDF5 tools 
 
-Section II: 
+   2. Build Only (Not included in the binary distribution)        
 
-  Building and testing hdf5 libraries and non-hdf4 related tools 
+      HDF5 tool library:
+           debug and release version
 
-      ==================================================
+      HDF5 tool export library for DLL:
+           debug and release version 
 
-STEP 1: Building hdf5 libraries and non-hdf4 related tools
+      HDF5 library testing programs:
+           HDF5 library comprehensive tests
+		
+      HDF5 related tools testing programs:
+           HDF5 tools comprehensive tests
 
+   3. Examples (Not included in the binary distribution)
 
-    1. Extract all.zip under c:\myHDFstuff\hdf5\windows  to c:\myHDFstuff'
+      HDF5 examples:
+           simple HDF5 C/C++/Fortran examples
 
-       The system directory can usually be found under the path 
-       C:\WINNT\system or C:\WINDOWS\system
-      
-    2. Invoke Microsoft Visual C++, go to "File" and select 
-       the "Open Workspace" option. 
-
-       Then open the c:\myHDFstuff\hdf5\proj\all\all.dsw 
-       workspace. 
-
-    3. Select project hdf5dll, right click mouse; choose settings,
-	 find "Link", go to the Category box and choose "Input",
-	 go to the box "Object/library modules" and go to the end of the line;
-	 check whether the zlib dll library path is correct.
-	 If not, replace the old path with the correct path.
-
-	 You should do this for both Debug and release version.
-
-    4. Go to "Tools" and select "Options", find "Directories";
-        4.1 Find the box "Show directories for", choose "Include files",
-            If you cannot find your zlib and szlib header path
-            (for example, C:\zlib114\include,C:\szlib\include)
-	      from the directory list,
-            add them(for example,C:\zlib114\include,C:\szlib\include) to 
-            the included directories.
-        4.2 Find the box "Show directories for", choose "Library files",
-            If you cannot find your zlib and szlib library path
-            (for example, C:\zlib114\lib,C:szlib\lib,C:szlib\dll)
-	      from the directory list,
-            add them(C:\zlib114\lib,C:\szlib\lib,C:\szlib\dll) to the included directories.
-
-    5. Select "Build", then Select "Set Active Configuration".
-
-       On Windows platform select as the active configuration
-
-	   "all -- Win32 Debug" to build debug versions of
-	    single-threaded static libraries, Debug multithreaded
-          DLLs and tests. 
-                or
-
-	   "all -- Win32 Release" to build release versions of
-          single-threaded static libraries, multithreaded DLLs
-          and tests.
+************************************************************************
 
+
+Section II: How to build and test HDF5 libraries and tools 
+========================================================================
+STEP 1: Building HDF5 libraries and tools
+    
+   1. Unpack all.zip
+    
+      Unpack all.zip in c:\MyHDFstuff\hdf5\windows directory.  Files in 
+      all.zip has path hdf5\....  Make sure that you extract files into
+      the c:\MyHDFstuff directory. 
+
+   2. Invoke Microsoft Visual C++ compiler
+    
+      Invoke Microsoft Visual C++.  From the main menu, go to "File"
+      and select the "Open Workspace" option. Then open the
+      c:\MyHDFstuff\hdf5\proj\all\all.dsw workspace. 
+
+      You should find windows project files listed as "all files, 
+      big files etc." on the left.        
+
+   3. (Optional) HDF5 C++, Fortran libraries and Intel compiler
+    
+      3.1 Skip this step if you do not want to build HDF5 C++ libraries
+        
+          Go to "Project" and select "dependencies";
+          Select "all" in the "Select project to modify:" box,
+          then enable the desired projects:
       
-       Warning messages can be ignored. 
+             dsets_cpp
+             dsets_cppdll
+             hdf5_cpp
+             hdf5_cppdll
+             testhdf5_cpp
+             testhdf5_cppdll
+
+      3.2 Skip this step if you do not want to build HDF5 Fortran
+          libraries
+        
+          Go to "Project" and select "dependencies";
+          Select "all" in the "Select project to modify:" box,
+          then enable the desired projects:
+              
+             flush1_fortran
+             flush1_fortrandll
+             flush2_fortran
+             flush2_fortrandll
+             hdf5_f90cstub
+             hdf5_f90cstubdll
+             hdf5_fortran
+             hdf5_fortrandll
+             libtest_cstubdll
+             libtest_fortran
+             libtest_fortrandll
+             testhdf5_fortran
+             testhdf5_fortrandll
+
+      3.3 Skip this step if you are not using Intel compilers
+    
+          a. Intel C Compiler
+             Go to Tools-->Select Compiler
+             Check Intel box and click OK button.
+          
+          b. Intel Fortran Compiler
+             Go to Tools-->Select Compiler
+             Check Intel box and click OK button.
+             Go to Tools-->Customize-->Add-ins and Macro Files
+             and check Intel Fortran Compiler Build Tool
+           
+          Note: Szip library is different when using Intel compiler.
+                You should build Szip source codes with Intel
+                compiler or download binaries for Intel compiler
+                from ftp://ftp.ncsa.uiuc.edu/HDF/szip/bin/windows.
+                The Szip library and header path should also be 
+                set up accordingly (refer to precondition 6).
+               
+   4. Select "Build", then Select "Set Active Configuration".
+
+      In "Project configurations", select the active configuration
+
+            "all -- Win32 Debug" to build debug versions of
+                    single-threaded static libraries, Debug 
+                    multithreaded DLLs and tests. 
+                
+                    or
+
+            "all -- Win32 Release" to build release versions of
+                    single-threaded static libraries, 
+                    multithreaded DLLs and tests.
+
+      Then build project "all".
+       
+      Warning messages can be ignored. 
 
-       When the debug or release build is done the directories 
-       listed below will contain the following files:
+      When the debug or release build is done the directories 
+      listed below will contain the following files:
 
             c:\MyHDFstuff\hdf5\proj\hdf5\debug - 
+
+               hdf5d.lib- the hdf5 static library
+
             c:\MyHDFstuff\hdf5\proj\hdf5\release - 
 
-                  hdf5.lib- the hdf5 library
+               hdf5.lib- the hdf5 static library
 
             c:\MyHDFstuff\hdf5\proj\hdf5dll\debug - 
 
-                  hdf5ddll.dll- the hdf5 library
-                  hdf5ddll.lib- the dll export library                  
+               hdf5ddll.dll- DLL
+               hdf5ddll.lib- the DLL export library                  
 
             c:\MyHDFstuff\hdf5\proj\hdf5dll\release - 
 
-                  hdf5dll.dll- the hdf5 library
-                  hdf5dll.lib- the dll export library
+               hdf5dll.dll- DLL
+               hdf5dll.lib- the DLL export library
+
+            c:\MyHDFstuff\hdf5\test\libtest\debug - 
+        and c:\MyHDFstuff\hdf5\test\libtest\release -
+            
+               libtest.lib - the internal library for test
+
+            c:\MyHDFstuff\hdf5\test\libtestD\debug -
 
-            c:\MyHDFstuff\hdf5\test\"test directory"-
+               libtestD.dll - the internal DLL for test
+               libtestD.lib - the internal DLL export library for test
 
-                        
-		c:\MyHDFstuff\hdf5\tools\toolslib\debug
-	      c:\MyHDFstuff\hdf5\tools\toolslib\release
+            c:\MyHDFstuff\hdf5\test\libtestD\release -
 
-                  toolslib.lib- the tools library
+               libtestD.dll - the internal DLL for test
+               libtestD.lib - the internal DLL export library for test
 
-            c:\MyHDFstuff\hdf5\tools\toolslibD\debug
-	      c:\MyHDFstuff\hdf5\tools\toolslibD\release
+            c:\MyHDFstuff\hdf5\tools\toolslib\debug -
+        and c:\MyHDFstuff\hdf5\tools\toolslib\release -
 
-                  toolslibD.lib- the dll export library 
+               toolslib.lib- the internal tools library
+
+            c:\MyHDFstuff\hdf5\tools\toolslibD\debug -
+        and c:\MyHDFstuff\hdf5\tools\toolslibD\release -
+
+               toolslibD.dll- DLL
+               toolslibD.lib- the internal DLL export library for tools 
 
             c:\MyHDFstuff\hdf5\tools\"tools directory"-
-            where non-hdf4 related tools directory is one of the 
-            following:
- 
-	          h5dump(dll)
+            where tools are located		
+
+       The directories listed below will contain the following files
+       ONLY when you choose to build HDF5 C++ libraries:
+       
+            c:\MyHDFstuff\hdf5\proj\hdf5_cpp\debug - 
+               
+               hdf5_cppd.lib- the HDF5 C++ API static library
+
+            c:\MyHDFstuff\hdf5\proj\hdf5_cpp\release - 
+               
+               hdf5_cpp.lib- the HDF5 C++ API static library
+
+            c:\MyHDFstuff\hdf5\proj\hdf5_cppdll\debug - 
+               
+               hdf5_cppddll.dll- the HDF5 C++ API DLL
+               hdf5_cppddll.lib- the C++ API DLL export library
+               
+            c:\MyHDFstuff\hdf5\proj\hdf5_cppdll\release - 
+               
+               hdf5_cppdll.dll- the HDF5 C++ API DLL
+               hdf5_cppdll.lib- the C++ API DLL export library
+            
+       The directories listed below will contain the following files
+       ONLY when you choose to build HDF5 Fortran libraries:
 
-                h5ls(dll)
+            c:\MyHDFstuff\hdf5\proj\hdf5_fortran\debug - 
+       
+               hdf5_fortrand.lib- the HDF5 Fortran API static library
+               
+            c:\MyHDFstuff\hdf5\proj\hdf5_fortran\release - 
+       
+               hdf5_fortran.lib- the HDF5 Fortran API static library
 
-                h5debug(dll)
+            c:\MyHDFstuff\hdf5\proj\hdf5_fortrandll\debug - 
+       
+               hdf5_fortranddll.dll- the HDF5 Fortran API DLL
+               hdf5_fortranddll.lib- the HDF5 Fortran API DLL export
+                                     library
+               
+            c:\MyHDFstuff\hdf5\proj\hdf5_fortrandll\release - 
+       
+               hdf5_fortrandll.dll- the HDF5 Fortran API DLL
+               hdf5_fortrandll.lib- the HDF5 Fortran API DLL export
+                                    library
+               
+            c:\MyHDFstuff\hdf5\proj\hdf5_f90sctub\debug - 
 
-                h5import(dll)
-                    
-                h5repart(dll)	            
+               hdf5_f90cstubd.lib- the HDF5 C and Fortran stub static
+                                   library
 
-                gifconv(dll)
-		
+            c:\MyHDFstuff\hdf5\proj\hdf5_f90cstub\release - 
+
+               hdf5_f90cstub.lib- the HDF5 C and Fortran stub static
+                                  library
+
+            c:\MyHDFstuff\hdf5\proj\hdf5_f90sctubdll\debug - 
 
-           Test and tool directory contains debug and release 
-           subdirectories with the corresponding tests and tools.
+               hdf5_f90cstubddll.dll- the HDF5 C and Fortran stub DLL
+               hdf5_f90cstubddll.lib- the HDF5 C and Fortran stub DLL
+                                      export library
 
+            c:\MyHDFstuff\hdf5\proj\hdf5_f90cstubdll\release - 
+
+               hdf5_f90cstubdll.dll- the HDF5 C and Fortran stub DLL
+               hdf5_f90cstubdll.lib- the HDF5 C and Fortran stub DLL
+                                     export library
+
+            c:\MyHDFstuff\hdf5\proj\libtest_cstubdll\debug - 
+          
+               libtest_cstubddll.dll- the HDF5 Fortran test C and
+                                      Fortran stub DLL
+               libtest_cstubddll.lib- the HDF5 Fortran test C and
+                                      Fortran stub DLL export library
+
+            c:\MyHDFstuff\hdf5\proj\libtest_cstubdll\release - 
+          
+               libtest_cstubdll.dll- the HDF5 Fortran test C and
+                                     Fortran stub DLL
+               libtest_cstubdll.lib- the HDF5 Fortran test C and
+                                     Fortran stub DLL export library
+
+            c:\MyHDFstuff\hdf5\proj\libtest_fortran\debug - 
+          
+               libtest_fortrand.lib- the HDF5 Fortran test static
+                                     library
+
+            c:\MyHDFstuff\hdf5\proj\libtest_fortran\release - 
+          
+               libtest_fortran.lib- the HDF5 Fortran test static
+                                    library
+
+            c:\MyHDFstuff\hdf5\proj\libtest_fortrandll\debug - 
+          
+               libtest_fortranddll.dll- the HDF5 Fortran test DLL
+               libtest_fortranddll.lib- the HDF5 Fortran test DLL
+                                        export library
+
+            c:\MyHDFstuff\hdf5\proj\libtest_fortran\release - 
+          
+               libtest_fortrandll.dll- the HDF5 Fortran test DLL
+               libtest_fortrandll.lib- the HDF5 Fortran test DLL
+                                       export library
+              
+
+STEP 2: Testing HDF5 libraries and tools
+
+HDF5 libraries and tools should be tested to make sure that they were
+built correctly.
+
+We provide 2 options for users to test HDF5 libraries and tools.  
+
+   Option 1: Automatic testings
+
+   HDF5 comes with various test suites, all of which can be tested
+   with hdf5check.bat batch file in c:\MyHDFstuff\hdf5 directory.
+
+   hdf5check batch file can be run with one of the following four
+   options:
+   
+      hdf5check                  test HDF5 C library and tools only
+      
+      hdf5check enablecpp        test HDF5 C/C++ libraries and tools
+                                 To use this option, HDF5 C++ 
+                                 libraries must have been built 
+                                 in step I.
+      
+      hdf5check enablefortran    test HDF5 C/FORTRAN libraries and
+                                 tools
+                                 To use this option, HDF5 Fortran
+                                 libraries must have been built 
+                                 in step I.      
+      
+      hdf5check enableall        test HDF5 C/C++/FORTRAN libraries
+                                 and tools
+                                 To use this option, HDF5 C++ and 
+                                 Fortran libraries must have been
+                                 built in step I.      
 
-STEP 2:   testing hdf5 libraries and non-hdf4 related tools 
+   Invoke a command prompt window and run hdf5check with appropriate
+   option.
 
-In a command prompt window run the test batch file which resides in 
-the hdf5\test directory(for example: C:\MyHDFstuff\hdf5\test)to make 
-sure that the library was built correctly.
+   Test results are saved in two files:
 
-You can possibily test four versions of hdf5 library and tools. They are:
+      c:\MyHDFstuff\hdf5\check_results.txt   
 
-	release version
-	release dll version
-	debug version
-	debug dll version
+      c:\MyHDFstuff\hdf5\tests_results.txt.
 
-NOTE: 
+   In general, you only need to check tests_results.txt.  If all the
+   tests passed, then you do not have to check check_results.txt.  
+   If some tests failed, check check_results.txt can help you
+   figure out what was wrong.
 
-1) hdf5ddll.dll and hdf5dll.dll should be placed into some place that
-the application can find, one suggestion is to use
-the C:\WINNT\system or C:\WINDOWS\system directory before using the dlls.
+   Option 2: Step-by-step HDF5 libraries and tools testings
 
-2) If you want to test HDF5 DLL using HDF5 test projects inside HDF5 workspace,
-libtestD.dll should also be placed into some place that the application 
-can find, one suggestion is to use the C:\WINNT\system or C:\WINDOWS\system
-directory before testing HDF5 DLL using HDF5 test projects inside HDF5
-workspace.
+   You can also test HDF5 libraries and tools one by one.  There are
+   possibly four versions of HDF5 libraries and tools testings. 
 
-We strongly suggest you to redirect your testing results into
-an output file and you can easily check the testing results. 
-You may use either NotePad or WordPad or whatever other
-windows tools to check the results. For the purpose of printing, 
-please choose font less than 14 for better alignment of the text.
+   They are:
 
-  1. hdf5 library testing 
+      release version
+      release dll version
+      debug version
+      debug dll version
 
-     cd into the hdf5\test directory. 
+   We strongly suggest you to redirect your testing results into an
+   output file so that you can easily check the testing results. You
+   may use either Notepad or WordPad or whatever other windows word
+   processor to check the results.  For the purpose of printing,  
+   please choose font less than 14 for better alignment of the text.
 
-        (1) basic tests
+   DLLs listed below should be placed into the Windows system
+   directory.  A batch file named install_dll.bat is included in 
+   c:\MyHDFstuff\hdf5 directory.  Run this batch file and the 
+   following HDF5 DLLs will be copied to the system directory.
+
+      hdf5\proj\hdf5dll\release\hdf5dll.dll
+      hdf5\proj\hdf5dll\debug\hdf5ddll.dll
+      hdf5\test\libtestD\release\libtestD.dll
+      hdf5\test\libtestD\debug\libtestDd.dll
+
+   1. HDF5 library testing 
+
+      cd into the hdf5\test directory. 
+
+         (1) basic tests
             
-            Go to a) b) c) or d) to test your chosen version
+             Go to a) b) c) or d) to test your chosen version
 
-            a) release static version
-            type:             
-               hdf5test release >"Your output filename" 
+             a) release static version
+             type:             
+                hdf5test release >"Your output filename" 
 
-	      b) release dll version
-            type:
-               hdf5test release dll > "Your output filename"
+             b) release dll version
+             type:
+                hdf5test release dll > "Your output filename"
 				
-            c) debug static version
-            type: 
-               hdf5test debug >"Your output filename"
+             c) debug static version
+             type: 
+                hdf5test debug >"Your output filename"
 
-            d) debug dll version
-            type:
-               hdf5test debug dll >"Your output filename"
+             d) debug dll version
+             type:
+                hdf5test debug dll >"Your output filename"
             
-        (2) timing tests
-
-            Go to a) b) c) or d) to test your chosen version
+         (2) timing tests
 
-            a) release static version
-            type:             
-               hdf5timingtest release >"Your output filename" 
+             Go to a) b) c) or d) to test your chosen version
+ 
+             a) release static version
+             type:             
+                hdf5timingtest release >"Your output filename" 
 
-	      b) release dll version
-            type:
-             hdf5timingtest release dll >"Your output filename"
+             b) release dll version
+             type:
+                hdf5timingtest release dll >"Your output filename"
 				
-            c) debug static version
-            type: 
-               hdf5timingtest debug >"Your output filename"
-
-            d) debug dll version
-            type:
-               hdf5timingtest debug dll >"Your output filename"
+             c) debug static version
+             type: 
+                hdf5timingtest debug >"Your output filename"
 
+             d) debug dll version
+             type:
+                hdf5timingtest debug dll >"Your output filename"
 
-     Use notepad or wordpad to check results. You should 
-not find any FAILED marks in your output files.
+      Use Notepad or WordPad to check results. You should 
+      not find any FAILED marks in your output files.
 
-  Note: big test is currently not working for windows because it needs
-to allocate more space, however, HDF5 can support more than 4GB
-file if you are using NTFS. We still investigate the possibility to support 
-this test.
+   2. HDF5 tools testing
  
- 2. hdf5 tools testing
- 
-    Currently we are only supporting h5dump test. We are 
-investigating h5ls test now. 
+      To test HDF5 tools, cd back into hdf5 directory and then cd into 
+      tools directory(c:\MyHDFstuff\hdf5\tools).  The HDF5 tools testing
+      results are saved into output files in tools directory by the
+      testhdf5tools.bat as described below.
+
+      Go to a) b) c) or d) to test your chosen version
+
+         a) release static version
+         type:             
+            testhdf5tools release
+         output file: toolstest_release.txt 
+
+         b) release dll version
+         type:
+            testhdf5tools release dll
+         output file: toolstest_releasedll.txt 
+				
+         c) debug static version
+         type: 
+            testhdf5tools debug
+         output file: toolstest_debug.txt 
+
+         d) debug dll version
+         type:
+            testhdf5tools debug dll
+         output file: toolstest_debugdll.txt 
+               
+      Use Notepad or WordPad to check results. You should 
+      not find any FAILED marks in your output files.
     
-    1) h5dump test
+   3. HDF5 C++ library test
+  
+      Skip this step UNLESS you have built HDF5 C++ libraries
+      and want to test them.
+     
+      DLLs listed below should be placed into to the Windows system
+      directory.  A batch file named install_cppdll.bat is included in 
+      c:\MyHDFstuff\hdf5 directory.  Run this batch file and the 
+      following HDF5 C++ DLLs will be copied to the system directory.
+       
+         hdf5\proj\hdf5_cppdll\release\hdf5_cppdll.dll
+         hdf5\proj\hdf5_cppdll\debug\hdf5_cppddll.dll
+
+      Run hdf5cpptest.bat in the hdf5\c++\test directory at the 
+      command prompt as below:
+     
+         hdf5cpptest release >"Your output filename"
+         hdf5cpptest release dll >"Your output filename"
+         hdf5cpptest debug >"Your output filename"
+         hdf5cpptest debug dll >"Your output filename"
+
+      Use Notepad or WordPad to check results. You should 
+      not find any FAILED marks in your output files.
+     
+   4. HDF5 Fortran library test
+  
+      Skip this step UNLESS you have built HDF5 Fortran libraries     
+      and want to test them.
+     
+      DLLs listed below should be placed into to the Windows system
+      directory.  A batch file named install_f90dll.bat is included in 
+      c:\MyHDFstuff\hdf5 directory.  Run this batch file and the 
+      following HDF5 Fortran DLLs will be copied to the system
+      directory.
+       
+         hdf5\proj\hdf5_f90cstubdll\release\hdf5_f90cstubdll.dll
+         hdf5\proj\hdf5_f90cstubdll\debug\hdf5_f90cstubddll.dll
+         hdf5\proj\hdf5_fortrandll\release\hdf5_fortrandll.dll
+         hdf5\proj\hdf5_fortrandll\debug\hdf5_fortranddll.dll
+         hdf5\proj\libtest_cstubdll\release\libtest_cstubdll.dll
+         hdf5\proj\libtest_cstubdll\debug\libtest_cstubddll.dll
+         hdf5\proj\libtest_fortrandll\release\libtest_fortrandll.dll
+         hdf5\proj\libtest_fortrandll\debug\libtest_fortranddll.dll
+
+      Run testhdf5_fortran.bat at the command prompt as below:
+
+         testhdf5_fortran release >"Your output filename"
+         testhdf5_fortran release dll >"Your output filename"
+         testhdf5_fortran debug >"Your output filename"
+         testhdf5_fortran debug dll >"Your output filename"
+
+      Use Notepad or WordPad to check results. You should 
+      not find any FAILED marks in your output files.
+
+     
+STEP 3: Installing HDF5 Libraries
+
+We provide a batch file for users to relocate all HDF5 libraries in one
+folder (C++ and Fortran libraries will also be copied into this folder
+if they have been built in step I).  The file is called
+installhdf5lib.bat under c:\MyHDFstuff\hdf5 directory.  Run the batch 
+file, you may see a folder called hdf5lib under c:\MyHDFstuff\hdf5.  
+    
+The <release> layout of <hdf5lib> should be:
+    
+   release\include   --  HDF5 header files
+   release\bin       --  HDF5 static tool executables
+   release\bindll    --  HDF5 DLL tool executables
+   release\lib       --  HDF5 static libraries
+   release\dll       --  HDF5 DLLs
+       
+You may also find the similar layout for the <debug>.
 
-    cd back into hdf5 directory and then cd into tools
-directory(...\hdf5\tools)
 
-    Go to a) b) c) or d) to test your chosen version
+STEP 4: Building HDF5 C/C++/Fortran examples (Optional)
 
-        a) release static version
-        type:             
-           dumptest release >"Your output filename" 
+Simple examples have been provided for users to test HDF5
+C/C++/Fortran library and tools.
 
-	  b) release dll version
-        type:
-           dumptest release dll > "Your output filename"
-				
-        c) debug static version
-        type: 
-           dumptest debug >"Your output filename"
+Note: 
+      1) To build HDF5 C++ examples, HDF5 C++ library must have been
+         built in step I.
 
-        d) debug dll version
-        type:
-           dumptest debug dll >"Your output filename"
-   
+      2) To build HDF5 Fortran examples, HDF5 Fortran library must
+         have been built in step I.
 
-    We are using "fc" command to compare whether dumper 
-generates correct results. Supposedly you should find 
-"FC: no differences encountered" in your output file. 
-However, since we are comparing the actual dumper output
-with the expected dumper output under different directory, 
-you may see something like:
-
-"
-***** ..\TESTFILES\tall-1.ddl
-#############################
-Expected output for 'h5dump tall.h5'
-#############################
-HDF5 "tall.h5" {
-GROUP "/" {
-***** TALL-1.RESULTS
-HDF5 "..\..\testfiles\tall.h5" {
-GROUP "/" {
-*****
-"
-
-   The actual dumper output is correct. The difference showing 
-here is the different representations of filename of the same 
-file.
-
-STEP 3: BUILDING THE EXAMPLES
-
-    1. Invoke Microsoft Visual C++, go to "File" and select
-       the "Open Workspace" option. 
-       Then open the workspace
-       c:\myHDFstuff\hdf5\examples\allexamples\allexamples.dsw.
-
-    2. Select "Build", then Select "Set Active Configuration".
-
-       On Windows platform select as the active configuration
-
-	   "allexamples -- Win32 Debug" to build debug versions 
-          of the examples.
-
-                or
+      3) By default, the debug versions of HDF5 C/C++/Fortran examples
+         are linked with the debug versions of HDF5 C/C++/Fortran
+         libraries and DLLs.  The debug versions of HDF5 C/C++/Fortran
+         examples will fail if they are linked with HDF5 binary
+         distribution, which only includes the release versions of
+         HDF5 C/C++/Fortran libraries and DLLs.
+
+To build and test HDF5 C examples:
+
+   1. Invoke Microsoft Visual C++, go to "File" and select
+      the "Open Workspace" option. 
+      
+      Then open the workspace
+      c:\MyHDFstuff\hdf5\examples\allexamples\allexamples.dsw.
+
+   2. Select "Build", then Select "Set Active Configuration".
+
+      In "Project configurations", select the active configuration
+
+          "allexamples -- Win32 Debug" to build debug versions of the
+                                       C examples.
+
+                          or
 	
-	   "allexamples -- Win32 Release" to build release 
-          versions the examples.
+          "allexamples -- Win32 Release" to build release versions the 
+                                         C examples.
+
+      When the debug build or release build is done, there should be the 
+      following subdirectories in c:\MyHDFstuff\hdf5\examples\
+
+          attributetest
+          attributetestdll
+          chunkread
+          chunkreaddll
+          compoundtest 
+          compoundtestdll
+          extendwritetest 
+          extendwritetestdll
+          grouptest 
+          grouptestdll
+          readtest 
+          readtestdll
+          selecttest 
+          selecttestdll
+          writetest 
+          writetestdll
+
+   3. Invoke a command prompt window and run the batch file 
+      InstallExamples.bat which resides in the top level directory
+      (c:\MyHDFstuff\hdf5).  This file creates 4 new directories, 
+      examplesREL, examplesRELDLL, examplesDBG, and examplesDBGDLL,
+      in the c:\MyHDFstuff\hdf5\examples directory and places all the
+      executables in it.  Both the release and debug versions of the
+      examples should be built before this step is done.
+
+   4. We provide a batch file named testExamples.bat and an expected
+      examples tests output file named testExamples_exp_output.txt
+      in c:\MyHDFstuff\hdf5\examples directory for you to test HDF5
+      C examples.
+      
+      testExamples.bat batch file has 4 options:
 
-          When the debug build or release build is done 
-          there should be the following subdirectories in 
-          C:\myHDFstuff\hdf5\examples\
+         testExamples release     -- for release version
 
-			attributetest
- 
-			chunkread
+         testExamples release dll -- for release DLL version
 
-			compoundtest 
+         testExamples debug       -- for debug version
 
-			extendwritetest 
+         testExamples debug dll   -- for debug DLL version
 
-			grouptest 
+      Invoke a command prompt window and run testExamples with
+      appropriate options.  You should get "All HDF5 C examples tests
+      passed." when the C examples are built successfully.  Otherwise,
+      the difference between the expected outputs and actual outputs
+      will be given.
 
-			readtest 
+To build and test HDF5 C++ examples:
 
-			selecttest 
+   1. Invoke Microsoft Visual C++, go to "File" and select
+      the "Open Workspace" option. 
 
-			writetest 
+      Then open the workspace
+      c:\myHDFstuff\hdf5\c++\examples\allcppexamples\allcppexamples.dsw.
 
+   2. Select "Build", then Select "Set Active Configuration".
 
+      In "Project configurations", select the active configuration
 
-    3. Run the batch file "InstallExamples.bat" which 
-       resides in the top level directory(C:\MyHDFSTUFF\hdf5).
-       This file creates 2 new directories,examplesREL and 
-       examplesDBG,in the examples directory and places
-       all the executables in it. Both the release and debug
-       versions of the examples should be built before this 
-       step is done. The examples should be tested in these 2 
-       new directories due to some dependencies between the 
-       examples. Especially writetest.exe and extendwritetest.exe 
-       should be executed before chunkread.exe and readtest.exe 
-       due to dependencies among these files.
+          "allcppexamples -- Win32 Debug" to build debug versions of the
+                                          C++ examples.
 
-Section III:  
-BUILDING AN APPLICATION USING THE HDF5 LIBRARY OR DLL- SOME HELPFUL 
-POINTERS
-====================================================================
+                             or
+	
+          "allcppexamples -- Win32 Release" to build release versions the 
+                                            C++ examples.
+
+      When the debug build or release build is done, there should be the 
+      following subdirectories in c:\MyHDFstuff\hdf5\c++\examples\
+
+          chunkstest
+          chunkstestdll
+          compoundtest 
+          compoundtestdll 
+          createtest 
+          createtestdll 
+          extend_dstest 
+          extend_dstestdll 
+          h5grouptest 
+          h5grouptestdll 
+          readdatatest 
+          readdatatestdll 
+          writedatatest 
+          writedatatestdll 
+
+   3. Invoke a command prompt window and run the batch file 
+      InstallcppExamples.bat which resides in the top level directory
+      (c:\MyHDFstuff\hdf5).  This file creates 4 new directories, 
+      cppexamplesREL, cppexamplesRELDLL, cppexamplesDBG,
+      and cppexamplesDBGDLL, in the c:\MyHDFstuff\c++\examples
+      directory and places all the executables in it.  Both the release
+      and debug versions of the examples should be built before this 
+      step is done.
+
+   4. We provide a batch file named testcppExamples.bat in
+      c:\MyHDFstuff\hdf5\c++\examples directory for you to test HDF5
+      C++ examples.
+      
+      testcppExamples.bat batch file has 4 options:
 
-If you are building an application that uses the HDF5 library the
-following locations will need to be specified for locating header files
-and linking in the HDF libraries:
+         testcppExamples release     -- for release version
 
-            <top-level HDF5 directory>\src
+         testcppExamples release dll -- for release DLL version
 
-where <top-level HDF5 directory> may be 
+         testcppExamples debug       -- for debug version 
 
-            C:\MyHDFstuff\hdf5\
+         testcppExamples debug dll   -- for debug DLL version 
 
-To specify this location in the settings for your VC++ project, you may choose 
-one of the following two methods.
+      Invoke a command prompt window and run testcppExamples with
+      appropriate options.  You should get "All HDF5 C++ examples tests
+      passed." when the C++ examples are built successfully.  Otherwise,
+      the difference between the expected outputs and actual outputs
+      will be given.
 
-   1) 
-    To insert the path that specifics HDF5 and zlib,szlib header files:
+To build and test HDF5 Fortran example:
 
-    1. Open your VC project in Microsoft Visual C++ and make sure it is
-       the active project.
+   1. Invoke Compaq visual Fortran or intel Fortran under Microsoft 
+      Visual studio development environment, go to "File" and select
+      the "Open Workspace" option.
 
-    2. Go to the Project menu and chose the 'Settings' option.
+      Then open the workspace
+      c:\MyHDFstuff\hdf5\fortran\examples\allf90examples\allf90examples.dsw.
 
-    3. Chose the build configuration you would like to modify in the
-       drop down menu labeled with 'Settings For:'
+   2. Select "Build", then Select "Set Active Configuration".
 
-    4. Chose the C/C++ tab
+      In "Project configurations", select the active configuration
 
-    5. At the bottom of the window, there should be a text-area labeled
-       with 'Project Options:'. In this text-area, scroll until you
-       reach the end and type /I "<top-level HDF5 directory>\src" and
-       then click OK.
+          "allf90examples -- Win32 Debug" to build debug versions of the
+                                          Fortran examples.
+
+                             or
+	
+          "allf90examples -- Win32 Release" to build release versions the 
+                                            Fortran examples.
+
+      When the debug build or release build is done, there should be the 
+      following subdirectories in c:\MyHDFstuff\hdf5\fortran\examples\
+
+          attreexampletest
+          attreexampletestdll 
+          compoundtest 
+          compoundtestdll
+          dsetexampletest
+          dsetexampletestdll
+          fileexampletest
+          fileexampletestdll
+          groupexampletest
+          groupexampletestdll
+          grpdsetexampletest
+          grpdsetexampletestdll
+          grpittest
+          grpittestdll
+          grpsexampletest
+          grpsexampletestdll
+          hyperslabtest
+          hyperslabtestdll
+          mountexampletest
+          mountexampletest
+          refobjexampletest
+          refobjexampletestdll
+          refregexampletest
+          refregexampletestdll
+          rwdsetexampletest
+          rwdsetexampletestdll
+          selecteletest
+          selecteletestdll
+
+   3. Invoke a command prompt window and run the batch file 
+      Installf90Examples.bat which resides in the top level directory
+      (c:\MyHDFstuff\hdf5).  This file creates 4 new directories, 
+      f90examplesREL, f90examplesRELDLL, f90examplesDBG, and
+      f90examplesDBGDLL, in the c:\MyHDFstuff\fortran\examples directory
+      and places all the executables in it.  Both the release and debug
+      versions of the examples should be built before this step is done.
+
+************************************************************************
+
+
+Section III: Building an application using the HDF5 library or DLL
+========================================================================
+Waring: The instructions below will only describe how to build an
+        application using the release version of the HDF5 library or
+        DLL.  To use the debug version of the HDF5 library or DLL, you
+        need to substitute the release version of the HDF5 library or
+        DLL with the debug version.
+
+To use HDF5 static library
+
+  To build an application that uses the HDF5 static library the
+  following locations will need to be specified for locating header
+  files and linking with the HDF static library, for example:
+
+   c:\MyHDFstuff\hdf5\hdf5lib\include
+   c:\MyHDFstuff\hdf5\hdf5lib\release\lib
+
+  if you have installed HDF5 library in Section II, step 3.
+
+  We assume that you will use Zlib and Szip compression with HDF5
+  library.
+
+  To specify these locations in the settings for your VC++ project,
+  you may choose one of the following two methods.
+
+   1) Method One
+
+    To insert the path that specifies HDF5 and Zlib, Szlib header files:
+
+    1. Open your VC++ project in Microsoft Visual C++ and make sure it
+       is the active project.
+
+    2. Go to the Project menu and chose the "Settings" option.
+
+    3. Choose the build configuration you would like to modify in the
+       drop down menu labeled with "Settings For:"
+
+    4. Choose the C/C++ tab
+
+    5. Choose "Preprocessor" in the drop down menu labeled with
+       "Category:"
+
+    6. In a text-area labeled with "Additional include directories:",
+       add HDF5, Zlib, and Szlib header files directories.  For example:
+       
+          c:\MyHDFstuff\hdf5\hdf5lib\include
+          c:\zlib114\include
+          c:\szlib\include
+
+       Then click OK.
+
+    7. (optional) to use HDF5 Fortran static library, the location of 
+       Fortran module files should be specified by following
+       Project->Settings->Fortran->Preprocessor,
+       and in a test-area labeled with "INCLUDE and USE Paths:", add
+       HDF5 Fortran module files directories.  For example:
+
+          c:\MyHDFstuff\hdf5\hdf5lib\include
 
-   
     To link the HDF5 library with your application:
 
-    1. Open your VC project in Microsoft Visual C++ and make sure it is
-       the active project.
+    1. Open your VC++ project in Microsoft Visual C++ and make sure it
+       is the active project.
 
-    2. Go to the Project menu and chose the 'Add to Project' option and
-       then 'Files' option.
+    2. Go to the Project menu and chose the "Add to Project" option and
+       then "Files" option.
 
-    3. Change the 'Files of type:' to 'Library Files (.lib)'
+    3. Change the "Files of type:" to "Library Files (.lib)"
 
     4. Navigate through the directories until you find the location of 
        the hdf5.lib. 
@@ -454,25 +989,48 @@ one of the following two methods.
 
     6. repeat 1-5, to select zlib.lib and szlib.lib.
 
-  2) 
+    7. (optional) repeat 1-5, to select hdf5_cpp.lib to link with HDF5
+       C++ static library.
+
+    8. (optional) repeat 1-5, to select hdf5_fortran.lib to link with
+       HDF5 Fortran static library.
+
+   2) Method Two
 
-	Go to tools/options/directories,
+    1. Go to Tools->Options->Directories,
+
+    2. Insert the correct HDF5, Zlib, Szlib paths for both headers(include)
+       and libraries.  For example, 
+       
+          c:\MyHDFstuff\hdf5\hdf5lib\include
+          c:\MyHDFstuff\hdf5\hdf5lib\lib
+          c:\zlib114\include
+          c:\zlib114\lib
+          c:\szlib\include
+          c:\szlib\lib
 
-	1. Insert the correct HDF5,zlib,szlib paths for both headers(include) and libraries.
-      2. Go to the Project menu and choose the 'Settings' option.
-      3. Find the "link" option and "Input" category, insert "zlib.lib, szlib.lib, hdf5.lib".
+    3. Go to the Project menu and choose the "Settings" option.
 
+    4. Find the "link" option and "Input" category, insert 
+       "zlib.lib, szlib.lib, hdf5.lib".
+
+    5. (Optional) repeat 3-4, to insert "hdf5_cpp.lib" if you want to 
+       use HDF5 C++ static library.
+
+    6. (Optional) repeat 3-4, to insert "hdf5_fortran.lib" if you want to 
+       use HDF5 Fortran static library.
 
 
 To use the DLL:
 
-    1. Follow the steps for specifing the location of the header files
+    1. Follow the steps for specifying the location of the header files
        as shown above.
 
     2. Follow the steps for linking the HDF5 library as shown above
        except now link the export library that is created with the DLL.
-       The export library is called hdf5dll.lib or hdf5ddll.lib for
-       debug version.
+       The export library is called hdf5dll.lib for HDF5 C libray,
+       hdf5_cppdll.lib for HDF5 C++ library, and hdf5_fortrandll.lib
+       for HDF5 Fortran library.
 
     3. Place the DLL in a location that Windows will be able to locate 
        it. The searched path and order for DLL's is
@@ -484,27 +1042,25 @@ To use the DLL:
           retrieves the path of this directory. 
        d) The Windows directory. The GetWindowsDirectory function
           retrieves the path of this directory.
-       e) The directories listed in the PATH environment variable. 
-    4. To modify your own application settings, please DO FOLLOW th "DLL Hints" 
-	at section IV "MORE HELPFUL POINTERS".
+       e) The directories listed in the PATH environment variable.
+ 
+    4. To modify your own application settings, please DO FOLLOW the 
+       "DLL Hints" at section IV "HELPFUL POINTERS".
 
+************************************************************************
 
-Section IV:
-MORE HELPFUL POINTERS
-=====================
 
+Section IV: HELPFUL POINTERS
+========================================================================
 
 Here are some notes that may be of help if you are not familiar with
 using the Visual C++ Development Environment.
 
 Project name and location issues: 
        
-    The files in all.zip must end up in the hdf5\ directory installed by
-    hdf5-1_6_0.zip
-
     If you must install all.dsw and all.dsp in another directory,
-    relative to hdf5\ , you will be asked to locate the sub-project
-    files, when you open the project all.dsw.
+    relative to hdf5 directory, you will be asked to locate the 
+    sub-project files, when you open the project all.dsw.
 
     If you want to rename all (the entire project), you will need to
     modify two files all.dsw and all.dsp as text (contrary to the
@@ -521,120 +1077,203 @@ Settings... details:
     Developer Studio project settings dialog.
 
     Project
-	  Settings
-	      C/C++
-		  Category
-		     PreProcessor
-			 Code Generation
-			    Use run-time Library
-				   These are all set to use 
-                                      Single-Threaded
+       Settings
+          C/C++
+             Category
+                Code Generation
+                   Use run-time Library
+                      These are all set to use Single-Threaded
 
 DLL... hints:
   
-   If you want to use DLL versions of hdf5 library in your application, 
+   If you want to use DLL versions of HDF5 library in your application, 
    you should  
-      1) put hdf5 DLL into windows system directory
-      2) add hdf5 DLL export library into your project
+      1) put HDF5 DLL into windows system directory
+      2) add HDF5 DLL export library into your project
       3) Follow "Settings... details" into the last line:
          change Single-Threaded into Multithreaded DLL or 
          Debug Multithreaded DLL
       4) Follow "Settings.. details" into PreProcessor:
          Project
-	       Settings
-	           C/C++
-		       Category
-		          PreProcessor
+            Settings
+               C/C++
+                  Category
+                     PreProcessor
 
          Find PreProcessor definations and Add _HDF5USEDLL_ at the
-         end of the PreProcessor definations
+         end of the PreProcessor definitions to use HDF5 C DLL.
+
+      5) (optional) repeat 4), add HDF5CPP_USEDLL at the
+         end of the PreProcessor definitions to use HDF5 C++ DLL.
+
+      6) (optional) Follow Project->Settings->Fortran->Category->
+         General->Predefined Preprocess or Symbols, and add 
+         "HDF5F90_WINDOWS" to use HDF5 Fortran DLL.
+
+************************************************************************
+
+
+Section V: How to disable Gzip(Zlib)/Szip compression
+
+Warning: When you modify the H5pubconf.h file as described below,
+         DO NOT just change the values of these macros from 1 to 0.
+         Please DO remove(or comment out) appropriate lines.
          
+   1. Disable Gzip compression 
+
+      If you would like to remove Gzip compression from the HDF5
+      library, follow the steps below.
+
+      1.1 Open the H5pubconf.h file from the c:\MyHDFstuff\hdf5\src
+          directory and remove(or comment out) the following two lines:
 
+             #define H5_HAVE_ZLIB_H 1
+             #define H5_HAVE_FILTER_DEFLATE 1
 
+          then save the file.
+	  
+      1.2 Delete HDF5_EXT_ZLIB environment variable if you have
+          set it in preconditions.
+   
+      1.3 Delete HDF5_EXT_ZLIB_DLL environment variable if you have
+          set it in preconditions.
+   
+      1.4 Run-compile HDF5 library according to section II.
 
-Section V:
+      When you disable Gzip, you may get the following message
+      when building HDF5 libraries:
 
-Disable gzip compression 
-============================================
+      The following environment variables were not found
+      $(HDF5_EXT_ZLIB)
+      $(HDF5_EXT_ZLIB_DLL)
 
-If you would like to remove gzip compression from the hdf5 library  
-follow the steps below.
+      This message can be ignored.
 
+   2. Disable Szip compression (both encoder and decoder)
 
-    1) Open the H5pubconf.h file from the src directory and remove(or comment
-       out) the following two lines:
+      If you would like to remove Szip compression from the HDF5
+      library, follow the steps below.
 
-		#define H5_HAVE_ZLIB_H 1
-		#define H5_HAVE_FILTER_DEFLATE 1
+      2.1 Open the H5pubconf.h file from the c:\MyHDFstuff\hdf5\src
+          directory and remove(or comment out) the following three
+          lines: 
 
-    then save the file.
+             #define H5_HAVE_SZLIB_H 1
+             #define H5_HAVE_FILTER_SZIP 1
+             #define H5_SZIP_CAN_ENCODE 1
+		   
+          then save the file.
 	
-    2) run-compile HDF5 library according to the previous steps.
+      2.2 Delete HDF5_EXT_SZIP environment variable if you have
+          set it in preconditions.
+   
+      2.3 Delete HDF5_EXT_SZIP_DLL environment variable if you have
+          set it in preconditions. 
+   
+      2.4 Delete HDF5_SZIP_ENCODE environment variable if you have
+          set it in preconditions.
+
+      2.5 Run-compile HDF5 library according to section II.
+
+      When you disable Szip, you may get the following message 
+      when building HDF5 libraries:
+
+      The following environment variables were not found
+      $(HDF5_EXT_SZIP)
+      $(HDF5_EXT_SZIP_DLL)
+
+      This message can be ignored.
+
+   Note:   
 
-Diable szip compression
-=============================================
-If you would like to remove szip compression from the hdf5 library  
-follow the steps below.
+   To disable Gzip and Szip at the same time, just follow 1.1~1.3
+   and 2.1~2.4 and run-compile HDF5 library according to section II.
 
+   3. Disable Szip encoder
 
-    1) Open the H5pubconf.h file from the src directory and remove(or comment
-       out) the following two lines: 
+      If you would like to just disable Szip encoder from the HDF5
+      library while keeping Szip decoder enabled, follow the steps
+      below.
 
-		#define H5_HAVE_SZLIB_H 1
-		#define H5_HAVE_FILTER_SZIP 1
+      3.1 Download Szip library without encoder
 
-    then save the file.
+          Szip library is different if you want to disable Szip encoder.
+          Download szip_noencoder binaries from
+          ftp://ftp.ncsa.uiuc.edu/HDF/szip/bin/windows.
+          The Szip library and header path should also be set up
+          accordingly (refer to precondition 6).
+   
+      3.2 Open the H5pubconf.h file from the c:\MyHDFstuff\hdf5\src
+          directory and remove (or comment out) the following line: 
+
+             #define H5_SZIP_CAN_ENCODE 1
+		   
+          then save the file.
 	
-    2) run-compile HDF5 library according to the previous steps.
+      3.3 Delete HDF5_SZIP_ENCODE environment variable if you have
+          set it in preconditions.
 
+      3.4 Run-compile HDF5 library according to section II.
 
-Section VI:
+************************************************************************
 
-How to build HDF5 in VS 7.0(.NET)    
-============================================
-We just briefly introduce you how to build HDF5 in VS 7.0(.NET);
 
-1. Open the old dataspace file with the "Open solution" option,
-.NET will automatically convert the data space file to solution file.
-2. Then find  "Build" and go to "Configuration Manager"; choose "release"
-or "debug", then choose "build all".
-3. If you want to change some project setting, select the project and right
-click the button to choose Properties; find the similar menu there as in 6.0.
-4. You need to specify the zlib include header files and libraries under 
-Tools->Options->Projects->VC++ Directories and choose Include and libraries under
-the category of "show directories for" to add the corresponding path.
+Section VI: How to build HDF5 in VS 7.0(.NET)    
+========================================================================
+
+We just briefly introduce you how to build HDF5 in VS 7.0(.NET);
 
-Note: Currently we only build and test .NET on windows XP.
+1. Open the old workspace file with the "Open solution" option,
+   .NET will automatically convert the data space file to solution file.
+2. Then find  "Build" and go to "Configuration Manager"; choose
+   "release" or "debug", then choose "build all".
+3. If you want to change some project setting, select the project and
+   right click the button to choose Properties; find the similar menu
+   there as in 6.0.
+4. You need to specify the zlib and szip include header files and 
+   libraries under Tools->Options->Projects->VC++ Directories and choose
+   Include and libraries under the category of "show directories for" to
+   add the corresponding path if you want to use compression feature
+   inside HDF5.
+
+NOTE: Please read section V if you do not want to use compression
+      feature inside HDF5.
+ 
+************************************************************************
 
-Section VII:
 
-Build and test HDF5 snapshot release
+Section VII: Building and testing HDF5 snapshot release
+========================================================================
 
-Note: This section is only for users who would like to build and test HDF5 snapshot release.
+Note: This section is only for users who would like to build and test 
+      HDF5 snapshot release.
 
-If you want to test and build HDF5 snapshot release, you need extra steps to automatically
-generate H5Tinit.c before going to section II step 1(2).
+If you want to test and build HDF5 snapshot release, you need extra 
+steps to automatically generate H5Tinit.c before going to section II
+step 1(2).
 
 Previous step: section II, step 1(1).
 Extra steps:
 1) After extracting all.zip to the correct path, open the 
-	c:\myHDFstuff\hdf5\misc\typegen\typegen.dsw.
+   c:\myHDFstuff\hdf5\misc\typegen\typegen.dsw.
 2) Build the project file.
 3) Invoke command prompt and go to c:\myHDFstuff\hdf5\src.
 4) type H5Tinit.exe >H5Tinit.c
 5) Go back to section II, continue with step 1(2).
 
-Section VIII:
+************************************************************************
 
-Misc.
+
+Section VIII: Misc.
+========================================================================
 
 1) drivers we support
-The default driver on windows we support is sec2 driver. However, stdio driver
-is also supported. If you want to use stdio driver in your application, you
-may set environment variable HDF5_DRIVER to "stdio".
+The default driver on windows we support is sec2 driver. However, stdio
+driver is also supported. If you want to use stdio driver in your 
+application, you may set environment variable HDF5_DRIVER to "stdio".
 
-On windows 2000, the following steps should be followed to set environment
-variable,
+On windows 2000/XP, the following steps should be followed to set the
+environment variable,
 
  a) Go to Control panel and find "system",
  b) Click "system" and choose "advanced",
@@ -642,8 +1281,10 @@ variable,
  d) Add new variable "HDF5_DRIVER"
  e) set the "HDF5_DRIVER" to "stdio"
 
-Reminder: if you don't want to use stdio driver, please remember to delete
-the environment variable "HDF5_DRIVER" or change the variable value to "sec2".
+Reminder: if you don't want to use stdio driver, please remember to 
+delete the environment variable "HDF5_DRIVER" or change the variable 
+value to "sec2".
+
 
 Please send email to hdfhelp@ncsa.uiuc.edu for further assistance.