Merge branch 'develop' of https://bitbucket.hdfgroup.org/scm/hdffv/hdf5 into merge_func_enter_vol

Plus initial steps toward merging API context push into FUNC_ENTER_API* macros

4 files changed, 556 insertions, 146 deletions

diff --git a/release_docs/INSTALL b/release_docs/INSTALL
index 2dcb9be..3709a58 100644
--- a/release_docs/INSTALL
+++ b/release_docs/INSTALL
@@ -305,7 +305,7 @@ CONTENTS
         to enable symbolic debugging of a production version of HDF5, one
         might say:
 
-            $ CFLAGS=-g ./configure --enable-production
+            $ CFLAGS=-g ./configure --enable-build-mode=production
 
 4.3.5. Compiling HDF5 wrapper libraries
         One can optionally build the Fortran and/or C++ interfaces to the
@@ -414,35 +414,35 @@ CONTENTS
         The library can be compiled to provide symbolic debugging support
         so it can be debugged with gdb, dbx, ddd, etc., or it can be
         compiled with various optimizations. To compile for symbolic
-        debugging (the default for snapshots), say `--disable-production';
-        to compile with optimizations (the default for supported public
-        releases), say `--enable-production'. On some systems the library
-        can also be compiled for profiling with gprof by saying
+        debugging (the default for snapshots), say 
+        `--enable-build-mode=production'; to compile with optimizations 
+        (the default for supported public releases), 
+        say `--enable-build-mode=production'. On some systems the 
+        library can also be compiled for profiling with gprof by saying
         `--enable-production=profile'.
 
-            $ ./configure --disable-production         #symbolic debugging
-            $ ./configure --enable-production          #optimized code
-            $ ./configure --enable-production=profile  #for use with gprof
+            $ ./configure --enable-build-mode=debug       #symbolic debugging
+            $ ./configure --enable-build-mode=production  #optimized code
+            $ ./configure --enable-production=profile     #for use with gprof
 
         Regardless of whether support for symbolic debugging is enabled,
         the library can also perform runtime debugging of certain packages 
         (such as type conversion execution times and extensive invariant 
-        condition checking). To enable this debugging, supply a
-        comma-separated list of package names to to the `--enable-debug'
-        switch.  See "Debugging HDF5 Applications" for a list of package 
-        names:
+        condition checking). To enable this debugging, supply a 
+        comma-separated list of package names to the `--enable-internal-debug' 
+        switch.  See "Debugging HDF5 Applications" for a list of package names:
 
             http://www.hdfgroup.org/HDF5/doc/H5.user/Debugging.html
 
-        Debugging can be disabled by saying `--disable-debug'. 
+        Debugging can be disabled by saying `--disable-internal-debug'. 
         The default debugging level for snapshots is a subset of the
         available packages; the default for supported releases is no
         debugging (debugging can incur a significant runtime penalty).
 
-            $ ./configure --enable-debug=s,t  #debug only H5S and H5T
-            $ ./configure --enable-debug      #debug normal packages
-            $ ./configure --enable-debug=all  #debug all packages
-            $ ./configure --disable-debug     #no debugging
+            $ ./configure --enable-internal-debug=s,t  #debug only H5S and H5T
+            $ ./configure --enable-internal-debug      #debug normal packages
+            $ ./configure --enable-internal-debug=all  #debug all packages
+            $ ./configure --disable-internal-debug     #no debugging
 
         HDF5 can also print a trace of all API function calls, their 
         arguments, and the return values. To enable or disable the
@@ -466,15 +466,17 @@ CONTENTS
             http://www.hdfgroup.org/HDF5/doc/TechNotes/ThreadSafeLibrary.html
 
 4.3.12. Backward compatibility
-        The 1.8 version of the HDF5 Library can be configured to operate
-        identically to the v1.6 library with the 
+        The 1.10 version of the HDF5 Library can be configured to operate
+        identically to the v1.8 library with the 
+            --with-default-api-version=v18
+        configure flag, or identically to the v1.6 library with the 
             --with-default-api-version=v16
         configure flag. This allows existing code to be compiled with the
-        v1.8 library without requiring immediate changes to the application 
+        v1.10 library without requiring immediate changes to the application 
         source code.  For addtional configuration options and other details, 
         see "API Compatibility Macros in HDF5":
 
-            http://www.hdfgroup.org/HDF5/doc/RM/APICompatMacros.html 
+            https://support.hdfgroup.org/HDF5/doc/RM/APICompatMacros.html 
 
 4.4. Building
         The library, confidence tests, and programs can be built by
diff --git a/release_docs/INSTALL_CMake.txt b/release_docs/INSTALL_CMake.txt
index 26750b5..f30c1b3 100644
--- a/release_docs/INSTALL_CMake.txt
+++ b/release_docs/INSTALL_CMake.txt
@@ -165,8 +165,9 @@ To build HDF5 with the SZIP and ZLIB external libraries you will need to:
 III. Quick Step Building HDF5 C Static Libraries and Tools with CMake
 ========================================================================
 Notes: This short set of instructions is written for users who want to
-       quickly build the just the HDF5 C static library and tools from
+       quickly build just the HDF5 C static library and tools from
        the HDF5 source code package using the CMake command line tools.
+       Avoid the use of drive letters in paths on Windows.
 
    Go through these steps:
 
@@ -564,7 +565,6 @@ HDF5_BUILD_TOOLS    "Build HDF5 Tools"               ON
 ALLOW_UNSUPPORTED              "Allow unsupported combinations of configure options"          OFF
 HDF5_DISABLE_COMPILER_WARNINGS "Disable compiler warnings"                                    OFF
 HDF5_ENABLE_ALL_WARNINGS       "Enable all warnings"                                          OFF
-HDF5_ENABLE_INSTRUMENT         "Instrument The library"                                       OFF
 HDF5_ENABLE_CODESTACK          "Enable the function stack tracing (for developer debugging)." OFF
 HDF5_ENABLE_COVERAGE           "Enable code coverage for Libraries and Programs"              OFF
 HDF5_ENABLE_DEBUG_APIS         "Turn on extra debug output in all packages"                   OFF
@@ -572,7 +572,6 @@ HDF5_ENABLE_DEPRECATED_SYMBOLS "Enable deprecated public API symbols"
 HDF5_ENABLE_DIRECT_VFD         "Build the Direct I/O Virtual File Driver"                     OFF
 HDF5_ENABLE_EMBEDDED_LIBINFO   "embed library info into executables"                          ON
 HDF5_ENABLE_HSIZET             "Enable datasets larger than memory"                           ON
-HDF5_ENABLE_LARGE_FILE         "Enable support for large (64-bit) files on Linux."            ON
 HDF5_ENABLE_PARALLEL           "Enable parallel build (requires MPI)"                         OFF
 HDF5_ENABLE_TRACE              "Enable API tracing capability"                                OFF
 HDF5_ENABLE_USING_MEMCHECKER   "Indicate that a memory checker is used"                       OFF
@@ -584,6 +583,8 @@ HDF5_METADATA_TRACE_FILE       "Enable metadata trace file collection"
 HDF5_NO_PACKAGES               "Do not include CPack Packaging"                               OFF
 HDF5_PACK_EXAMPLES             "Package the HDF5 Library Examples Compressed File"            OFF
 HDF5_PACK_MACOSX_FRAMEWORK     "Package the HDF5 Library in a Frameworks"                     OFF
+HDF5_BUILD_FRAMEWORKS          "TRUE to build as frameworks libraries,
+                                FALSE to build according to BUILD_SHARED_LIBS"                FALSE
 HDF5_PACKAGE_EXTLIBS           "CPACK - include external libraries"                           OFF
 HDF5_STRICT_FORMAT_CHECKS      "Whether to perform strict file format checks"                 OFF
 HDF_TEST_EXPRESS               "Control testing framework (0-3)"                              "0"
@@ -594,11 +595,10 @@ HDF5_USE_FOLDERS               "Enable folder grouping of projects in IDEs."
 HDF5_WANT_DATA_ACCURACY        "IF data accuracy is guaranteed during data conversions"       ON
 HDF5_WANT_DCONV_EXCEPTION      "exception handling functions is checked during data conversions" ON
 HDF5_ENABLE_THREADSAFE         "Enable Threadsafety"                                          OFF
-SKIP_HDF5_FORTRAN_SHARED       "Do not build the fortran shared libraries"                    OFF
 if (APPLE)
     HDF5_BUILD_WITH_INSTALL_NAME "Build with library install_name set to the installation path"  OFF
 if (CMAKE_BUILD_TYPE MATCHES Debug)
-    HDF5_ENABLE_TRACE          "Enable API tracing capability"               ON
+    HDF5_ENABLE_INSTRUMENT     "Instrument The library"                      OFF
 if (HDF5_TEST_VFD)
     HDF5_TEST_FHEAP_VFD        "Execute fheap test with different VFDs"      ON
 
@@ -648,7 +648,7 @@ adding an option (${CTEST_SCRIPT_ARG}) to the platform configuration script.
 ### ctest -S HDF5config.cmake,BUILD_GENERATOR=VS201764 -C Release -VV -O hdf5.log         ###
 #############################################################################################
 
-cmake_minimum_required (VERSION 3.2.2 FATAL_ERROR)
+cmake_minimum_required (VERSION 3.10)
 ############################################################################
 # Usage:
 #     ctest -S HDF5config.cmake,OPTION=VALUE -C Release -VV -O test.log
@@ -665,10 +665,6 @@ cmake_minimum_required (VERSION 3.2.2 FATAL_ERROR)
 #     INSTALLDIR  -  root folder where hdf5 is installed
 #     CTEST_CONFIGURATION_TYPE  - Release, Debug, etc
 #     CTEST_SOURCE_NAME  -  source folder
-#     STATIC_ONLY  -  Build/use static libraries
-#     FORTRAN_LIBRARIES -  Build/use fortran libraries
-#     JAVA_LIBRARIES -  Build/use java libraries
-#     NO_MAC_FORTRAN  - Yes to be SHARED on a Mac
 ##############################################################################
 
 set (CTEST_SOURCE_VERSION "1.11.0")
@@ -680,10 +676,6 @@ set (CTEST_SOURCE_VERSEXT "")
 #INSTALLDIR - HDF5-1.10.0 root folder
 #CTEST_CONFIGURATION_TYPE - Release, Debug, RelWithDebInfo
 #CTEST_SOURCE_NAME - name of source folder; HDF5-1.10.0
-#STATIC_ONLY - Default is YES
-#FORTRAN_LIBRARIES - Default is NO
-#JAVA_LIBRARIES - Default is NO
-#NO_MAC_FORTRAN - set to TRUE to allow shared libs on a Mac
 if (DEFINED CTEST_SCRIPT_ARG)
     # transform ctest script arguments of the form
     # script.ctest,var1=value1,var2=value2
diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt
index 7498d01..e6fd8d3 100644
--- a/release_docs/RELEASE.txt
+++ b/release_docs/RELEASE.txt
@@ -1,4 +1,4 @@
-HDF5 version 1.11.0 currently under development
+HDF5 version 1.11.2 currently under development
 ================================================================================
 
 
@@ -54,11 +54,68 @@ New Features
 
     Configuration:
     -------------
-    -
+    - CMake
+
+      Change minimum version to 3.10.
+
+      This change removes the need to support a copy of the FindMPI.cmake module,
+      which has been removed, along with its subfolder in the config/cmake_ext_mod
+      location.
+
+      (ADB - 2018/03/09)
+
+    - CMake
+
+      Add pkg-config file generation
+
+      Added pkg-config file generation for the C, C++, HL, and HL C++ libraries.
+      In addition, builds on linux will create h5cXXX scripts that use the pkg-config
+      files. This is a limited implementation of a script like autotools h5cc.
+
+      (ADB - 2018/03/08, HDFFV-4359)
+
+    - CMake
+
+      Refactor use of CMAKE_BUILD_TYPE for new variable, which understands
+      the type of generator in use.
+
+      Added new configuration macros to use new HDF_BUILD_TYPE variable. This
+      variable is set correctly for the type of generator being used for the build.
+
+      (ADB - 2018/01/08, HDFFV-10385, HDFFV-10296)
 
     Library:
     --------
-    -
+    - Add an enumerated value to H5F_libver_t for H5Pset_libver_bounds().
+
+      Currently, the library defines two values for H5F_libver_t and supports
+      only two pairs of (low, high) combinations as derived from these values.
+      Thus the bounds setting via H5Pset_libver_bounds() is rather restricted.
+
+      Add an enumerated value (H5F_LIBVER_V18) to H5F_libver_t and
+      H5Pset_libver_bounds() now supports five pairs of (low, high) combinations
+      as derived from these values.  This addition provides the user more
+      flexibility in setting bounds for object creation.
+
+      (VC - 2018/03/14)
+
+    - Add prefix option to VDS files.
+
+      Currently, VDS source files must be in the active directory to be
+      found by the virtual file. Adding the option of a prefix to be set
+      on the virtual file, using a data access property list (DAPL),
+      allows the source files to located at an absolute or relative path
+      to the virtual file.
+      Private utility functions in H5D and H5L packages merged into single
+      function in H5F package.
+
+      New public APIs:
+            herr_t H5Pset_virtual_prefix(hid_t dapl_id, const char* prefix);
+            ssize_t H5Pget_virtual_prefix(hid_t dapl_id, char* prefix /*out*/, size_t size);
+      The prefix can also be set with an environment variable, HDF5_VDS_PREFIX.
+
+      (ADB - 2017/12/12, HDFFV-9724, HDFFV-10361)
+
 
     Parallel Library:
     -----------------
@@ -117,7 +174,85 @@ New Features
 
     C++ Library:
     ------------
-    -
+    - The following wrappers are added:
+
+      + H5Lcreate_soft:
+        // Creates a soft link from link_name to target_name.
+        void link(const char *target_name, const char *link_name,...)
+        void link(const H5std_string& target_name,...)
+
+      + H5Lcreate_hard:
+        // Creates a hard link from new_name to curr_name.
+        void link(const char *curr_name, const Group& new_loc,...)
+        void link(const H5std_string& curr_name, const Group& new_loc,...)
+
+        // Creates a hard link from new_name to curr_name in same location.
+        void link(const char *curr_name, const hid_t same_loc,...)
+        void link(const H5std_string& curr_name, const hid_t same_loc,...)
+
+        Note: previous version of H5Location::link will be deprecated.
+
+      + H5Lcopy:
+        // Copy an object from a group of file to another.
+        void copyLink(const char *src_name, const Group& dst,...)
+        void copyLink(const H5std_string& src_name, const Group& dst,...)
+
+        // Copy an object from a group of file to the same location.
+        void copyLink(const char *src_name, const char *dst_name,...)
+        void copyLink(const H5std_string& src_name,...)
+
+      + H5Lmove:
+        // Rename an object in a group or file to a new location.
+        void moveLink(const char* src_name, const Group& dst,...)
+        void moveLink(const H5std_string& src_name, const Group& dst,...)
+
+        // Rename an object in a group or file to the same location.
+        void moveLink(const char* src_name, const char* dst_name,...)
+        void moveLink(const H5std_string& src_name,...)
+
+        Note: previous version H5Location::move will be deprecated.
+
+      + H5Ldelete:
+        // Removes the specified link from this location.
+        void unlink(const char *link_name,
+            const LinkAccPropList& lapl = LinkAccPropList::DEFAULT)
+        void unlink(const H5std_string& link_name,
+            const LinkAccPropList& lapl = LinkAccPropList::DEFAULT)
+
+    - Added class LinkCreatPropList
+
+    - Added overloaded functions H5Location::createGroup to take a link
+      creation property list
+        Group createGroup(const char* name, const LinkCreatPropList& lcpl)
+        Group createGroup(const H5std_string& name, const LinkCreatPropList& lcpl)
+    - Added wrapper for H5Lget_info() to H5Location
+        // Returns the information of the named link.
+        H5L_info_t getLinkInfo(const H5std_string& link_name,...)
+
+      (BMR - 2018/03/11, HDFFV-10149)
+
+
+    Java Library:
+    ----------------
+    - Wrapper added for enabling the error stack.
+
+      H5error_off would disable the error stack reporting. In order
+      to re-enable the reporting, the error stack info needs to be
+      saved so that H5error_on can revert state.
+
+      (ADB - 2018/03/13, HDFFV-10412)
+
+    - Wrappers added for the following APIs:
+      H5Pset_evict_on_close
+      H5Pget_evict_on_close
+      H5Pset_chunk_opts
+      H5Pget_chunk_opts
+      H5Pset_efile_prefix
+      H5Pget_efile_prefix
+      H5Pset_virtual_prefix
+      H5Pget_virtual_prefix
+
+      (ADB - 2017/12/20)
 
     Tools:
     ------
@@ -157,6 +292,29 @@ Bug Fixes since HDF5-1.10.1 release
 
     Library
     -------
+    - Freeing of object header in H5Ocache.c
+
+      It was discovered that the object header was not released properly
+      when the checksum verification failed and a re-load of the object
+      header was needed.
+
+      Free the object header that failed the chksum verification only
+      after the new object header is reloaded, deserialized and set up.
+
+      (VC - 2018/03/14, HDFFV-10209)
+
+    - H5Pset_evict_on_close in H5Pfapl.c
+
+      Changed the minor error number from H5E_CANTSET to H5E_UNSUPPORTED for
+      parallel library.
+             (ADB - 2018/03/6, HDFFV-10414)
+
+    - Utility function can not handle lowercase Windows drive letters
+
+      Added call to toupper function for drive letter.
+
+      (ADB - 2017/12/18, HDFFV-10307)
+
     - filter plugin handling in H5PL.c and H5Z.c
 
       It was discovered that the dynamic loading process used by
@@ -194,9 +352,135 @@ Bug Fixes since HDF5-1.10.1 release
 
       (DER - 2017/11/21, HDFFV-10330)
 
+    - If an HDF5 file contains a filter pipeline message with a 'number of
+      filters' field that exceeds the maximum number of allowed filters,
+      the error handling code will attempt to dereference a NULL pointer.
+
+      This issue was reported to The HDF Group as issue #CVE-2017-17505.
+
+      NOTE: The HDF5 C library cannot produce such a file. This condition
+            should only occur in a corrupt (or deliberately altered) file
+            or a file created by third-party software.
+
+      This problem arose because the error handling code assumed that
+      the 'number of filters' field implied that a dynamic array of that
+      size had already been created and that the cleanup code should
+      iterate over that array and clean up each element's resources. If
+      an error occurred before the array has been allocated, this will
+      not be true.
+
+      This has been changed so that the number of filters is set to
+      zero on errors. Additionally, the filter array traversal in the
+      error handling code now requires that the filter array not be NULL.
+
+      (DER - 2018/02/06, HDFFV-10354)
+
+    - If an HDF5 file contains a filter pipeline message which contains
+      a 'number of filters' field that exceeds the actual number of
+      filters in the message, the HDF5 C library will read off the end of
+      the read buffer.
+
+      This issue was reported to The HDF Group as issue #CVE-2017-17506.
+
+      NOTE: The HDF5 C library cannot produce such a file. This condition
+            should only occur in a corrupt (or deliberately altered) file
+            or a file created by third-party software.
+
+      The problem was fixed by passing the buffer size with the buffer
+      and ensuring that the pointer cannot be incremented off the end
+      of the buffer. A mismatch between the number of filters declared
+      and the actual number of filters will now invoke normal HDF5
+      error handling.
+
+      (DER - 2018/02/26, HDFFV-10355)
+
+    - If an HDF5 file contains a malformed compound datatype with a
+      suitably large offset, the type conversion code can run off
+      the end of the type conversion buffer, causing a segmentation
+      fault.
+
+      This issue was reported to The HDF Group as issue #CVE-2017-17507.
+
+      NOTE: The HDF5 C library cannot produce such a file. This condition
+            should only occur in a corrupt (or deliberately altered) file
+            or a file created by third-party software.
+
+      THE HDF GROUP WILL NOT FIX THIS BUG AT THIS TIME
+
+      Fixing this problem would involve updating the publicly visible
+      H5T_conv_t function pointer typedef and versioning the API calls
+      which use it. We normally only modify the public API during
+      major releases, so this bug will not be fixed at this time.
+
+      (DER - 2018/02/26, HDFFV-10356)
+
+    - If an HDF5 file contains a malformed compound type which contains
+      a member of size zero, a division by zero error will occur while
+      processing the type.
+
+      This issue was reported to The HDF Group as issue #CVE-2017-17508.
+
+      NOTE: The HDF5 C library cannot produce such a file. This condition
+            should only occur in a corrupt (or deliberately altered) file
+            or a file created by third-party software.
+
+      Checking for zero before dividing fixes the problem. Instead of the
+      division by zero, the normal HDF5 error handling is invoked.
+
+      (DER - 2018/02/26, HDFFV-10357)
+
+    - If an HDF5 file contains a malformed symbol table node that declares
+      it contains more symbols than it actually contains, the library
+      can run off the end of the metadata cache buffer while processing
+      the symbol table node.
+
+      This issue was reported to The HDF Group as issue #CVE-2017-17509.
+
+      NOTE: The HDF5 C library cannot produce such a file. This condition
+            should only occur in a corrupt (or deliberately altered) file
+            or a file created by third-party software.
+
+      Performing bounds checks on the buffer while processing fixes the
+      problem. Instead of the segmentation fault, the normal HDF5 error
+      handling is invoked.
+
+      (DER - 2018/03/12, HDFFV-10358)
+
     Configuration
     -------------
-    - cmake
+    - CMake
+
+      Update CMake commands configuration.
+
+      A number of improvements were made to the CMake commands. Most
+      changes simplify usage or eliminate unused constructs. Also,
+      some changes support better cross-platform support.
+
+      (ADB - 2018/02/01, HDFFV-10398)
+
+    - CMake
+
+      Correct usage of CMAKE_BUILD_TYPE variable.
+
+      The use of the CMAKE_BUILD_TYPE is incorrect for multi-config
+      generators (Visual Studio and XCode) and is optional for single
+      config generators. Created a new macro to check
+        GLOBAL PROPERTY -> GENERATOR_IS_MULTI_CONFIG
+      Created two new HDF variable, HDF_BUILD_TYPE and HDF_CFG_BUILD_TYPE.
+      Defaults for these variables is "Release".
+
+      (ADB - 2018/01/10, HDFFV-10385)
+
+    - CMake
+
+      Add replacement of fortran flags if using static CRT.
+
+      Added TARGET_STATIC_CRT_FLAGS call to HDFUseFortran.cmake file in
+      config/cmake_ext_mod folder.
+
+      (ADB - 2018/01/08, HDFFV-10334)
+
+    - CMake
 
       The hdf5 library used shared szip and zlib, which needlessly required
       applications to link with the same szip and zlib libraries.
@@ -208,18 +492,18 @@ Bug Fixes since HDF5-1.10.1 release
 
       (ADB - 2017/11/14, HDFFV-10329)
 
-    - cmake MPI
+    - CMake MPI
 
       CMake implementation for MPI was problematic and would create incorrect
       MPI library references in the hdf5 libraries.
 
-      Reworked the CMake MPI code to properly create CMake targets.Also merged
+      Reworked the CMake MPI code to properly create CMake targets. Also merged
       the latest CMake FindMPI.cmake changes to the local copy. This is necessary
       until HDF changes the CMake minimum to 3.9 or greater.
 
       (ADB - 2017/11/02, HDFFV-10321)
 
-    - cmake
+    - CMake
 
       Too many commands for POST_BUILD step caused command line to be
       too big on windows.
@@ -240,6 +524,95 @@ Bug Fixes since HDF5-1.10.1 release
 
     Tools
     -----
+    - h5clear
+
+      An enhancement to the tool in setting a file's stored EOA.
+
+      It was discovered that a crashed file's stored EOA in the superblock
+      was smaller than the actual file's EOF.  When the file was reopened
+      and closed, the library truncated the file to the stored EOA.
+
+      Add an option to the tool in setting the file's stored EOA in the
+      superblock to the maximum of (EOA, EOF) + increment.
+      Another option is also added to print the file's EOA and EOF.
+
+      (VC - 2018/03/14, HDFFV-10360)
+
+    - h5repack
+
+      h5repack changes the chunk parameters when a change of layout is not
+      specified and a filter is applied.
+
+      HDFFV-10297, HDFFV-10319 reworked code for h5repack and h5diff code
+      in the tools library. The check for an existing layout was incorrectly
+      placed into an if block and not executed. The check was moved into
+      the normal path of the function.
+
+      (ADB - 2018/02/21, HDFFV-10412)
+
+    - h5dump
+
+      the tools library will hide the error stack during file open.
+
+      While this is preferable almost always, there are reasons to enable
+      display of the error stack when a tool will not open a file. Adding an
+      optional argument to the --enable-error-stack will provide this use case.
+      As an optional argument it will not affect the operation of the
+      --enable-error-stack. h5dump is the only tool to implement this change.
+
+      (ADB - 2018/02/15, HDFFV-10384)
+
+    - h5dump
+
+      h5dump would output an indented blank line in the filters section.
+
+      h5dump overused the h5tools_simple_prefix function, which is a
+      function intended to account for the data index (x,y,z) option.
+      Removed the function call for header information.
+
+      (ADB - 2018/01/25, HDFFV-10396)
+
+    - h5repack
+
+      h5repack incorrectly searched internal object table for name.
+
+      h5repack would search the table of objects for a name, if the
+      name did not match it tried to determine if the name without a
+      leading slash would match. The logic was flawed! The table
+      stored names(paths) without a leading slash and did a strstr
+      of the table path to the name.
+      The assumption was that if there was a difference of one then
+      it was a match, however "pressure" would match "/pressure" as
+      well as "/pressure1", "/pressure2", etc. Changed logic to remove
+      any leading slash and then do a full compare of the name.
+
+      (ADB - 2018/01/18, HDFFV-10393)
+
+    - h5repack
+
+      h5repack failed to handle more then 9 chars for int conversion.
+
+      User defined filter parameter conversions would fail for integers
+      larger then 9 characters. Increased local variable array for storing
+      the current command line parameter to prevent buffer overflows.
+
+      (ADB - 2018/01/17, HDFFV-10392)
+
+    - h5diff
+
+      h5diff seg faulted if comparing VL strings against fixed strings.
+
+      Reworked solution for HDFFV-8625 and HDFFV-8639. Implemented the check
+      for string objects of same type in the diff_can_type function by
+      adding an if(tclass1 == H5T_STRING) block. This if block moves the
+      same check that was added for attributes to this function, which is
+      used by all object types. This function also handles complex type
+      structures.
+      Also added a new test file in h5diffgenttest for testing this issue
+      and removed the temporary files used in the test scripts.
+
+      (ADB - 2018/01/04, HDFFV-8745)
+
     - h5repack
 
       h5repack failed to copy a dataset with existing filter.
@@ -348,11 +721,20 @@ Bug Fixes since HDF5-1.10.1 release
 
     C++ APIs
     --------
-    -
+    - Removal of memory leaks
+
+      A private function was inadvertently called, causing memory leaks.  This
+      is now fixed.
+
+      (BMR - 2018/03/12 - User's reported in email)
 
     Testing
     -------
-    -
+    - Memory for three variables in testphdf5's coll_write_test was malloced
+      but not freed, leaking memory when running the test.  The variables'
+      memory is now freed.
+
+      (LRK - 2018/03/12, HDFFV-10397)
 
 Supported Platforms
 ===================
diff --git a/release_docs/USING_HDF5_CMake.txt b/release_docs/USING_HDF5_CMake.txt
index ecf972d..b516056 100644
--- a/release_docs/USING_HDF5_CMake.txt
+++ b/release_docs/USING_HDF5_CMake.txt
@@ -37,7 +37,7 @@ I. Preconditions
 
    1. We suggest you obtain the latest CMake for windows from the Kitware
       web site. The HDF5 1.10.x product requires a minimum CMake version
-      of 3.2.2.
+      of 3.10.1.
 
    2. You have installed the HDF5 library built with CMake, by executing
       the HDF Install Utility (the *.msi file in the binary package for
@@ -101,10 +101,10 @@ These steps are described in more detail below.
             * Unix Makefiles
             * Visual Studio 12 2013
             * Visual Studio 12 2013 Win64
-            * Visual Studio 11 2012
-            * Visual Studio 11 2012 Win64
             * Visual Studio 14 2015
             * Visual Studio 14 2015 Win64
+            * Visual Studio 15 2017
+            * Visual Studio 15 2017 Win64
 
         <options> is:
             * BUILD_TESTING:BOOL=ON
@@ -180,7 +180,7 @@ Given the preconditions in section I, create a CMakeLists.txt file at the
 source root. Include the following text in the file:
 
 ##########################################################
-cmake_minimum_required (VERSION 3.2.2)
+cmake_minimum_required (VERSION 3.10)
 project (HDF5MyApp C CXX)
 
 set (LIB_TYPE STATIC) # or SHARED
@@ -194,7 +194,6 @@ set (LINK_LIBS ${LINK_LIBS} ${HDF5_C_${LIB_TYPE}_LIBRARY})
 set (example hdf_example)
 
 add_executable (${example} ${PROJECT_SOURCE_DIR}/${example}.c)
-TARGET_NAMING (${example} ${LIB_TYPE})
 TARGET_C_PROPERTIES (${example} ${LIB_TYPE} " " " ")
 target_link_libraries (${example} ${LINK_LIBS})
 
@@ -220,129 +219,113 @@ NOTE: this file is available at the HDF web site:
     http://www.hdfgroup.org/HDF5/release/cmakebuild.html
 
     HDF5_Examples.cmake
+    HDF5_Examples_options.cmake
 
 Also available at the HDF web site is a CMake application framework template.
 You can quickly add files to the framework and execute the script to compile
 your application with an installed HDF5 binary.
 
 ========================================================================
-ctest
+ctest use of HDF5_Examples.cmake and HDF5_Examples_options.cmake
 ========================================================================
 
-cmake_minimum_required(VERSION 3.2.2 FATAL_ERROR)
+cmake_minimum_required (VERSION 3.10)
 ###############################################################################################################
 # This script will build and run the examples from a folder
 # Execute from a command line:
-#     ctest -S HDF5_Examples.cmake,OPTION=VALUE -C Release -V -O test.log
+#     ctest -S HDF5_Examples.cmake,OPTION=VALUE -C Release -VV -O test.log
 ###############################################################################################################
 
-set (CTEST_CMAKE_GENERATOR "@CMAKE_GENERATOR@")
-set (CTEST_DASHBOARD_ROOT ${CTEST_SCRIPT_DIRECTORY})
+set(CTEST_CMAKE_GENERATOR "@CMAKE_GENERATOR@")
+if("@CMAKE_GENERATOR_TOOLSET@")
+  set(CMAKE_GENERATOR_TOOLSET "@CMAKE_GENERATOR_TOOLSET@")
+endif()
+set(CTEST_DASHBOARD_ROOT ${CTEST_SCRIPT_DIRECTORY})
 
 # handle input parameters to script.
 #INSTALLDIR - HDF5 root folder
 #CTEST_CONFIGURATION_TYPE - Release, Debug, RelWithDebInfo
-#CTEST_SOURCE_NAME - name of source folder; HDF4Examples
-#STATIC_ONLY - Default is YES
-#FORTRAN_LIBRARIES - Default is NO
-#JAVA_LIBRARIES - Default is NO
-##NO_MAC_FORTRAN - set to TRUE to allow shared libs on a Mac)
-if (DEFINED CTEST_SCRIPT_ARG)
-    # transform ctest script arguments of the form
-    # script.ctest,var1=value1,var2=value2
-    # to variables with the respective names set to the respective values
-    string (REPLACE "," ";" script_args "${CTEST_SCRIPT_ARG}")
-    foreach (current_var ${script_args})
-        if ("${current_var}" MATCHES "^([^=]+)=(.+)$")
-            set("${CMAKE_MATCH_1}" "${CMAKE_MATCH_2}")
-        endif ()
-    endforeach ()
-endif ()
-if (NOT DEFINED INSTALLDIR)
-    set (INSTALLDIR "@CMAKE_INSTALL_PREFIX@")
-endif ()
-if (NOT DEFINED CTEST_CONFIGURATION_TYPE)
-    set (CTEST_CONFIGURATION_TYPE "Release")
-endif ()
-if (NOT DEFINED CTEST_SOURCE_NAME)
-    set (CTEST_SOURCE_NAME "HDF5Examples")
-endif ()
-if (NOT DEFINED STATIC_ONLY)
-    set (STATICONLYLIBRARIES "YES")
-else ()
-    set (STATICONLYLIBRARIES "NO")
-endif ()
-if (NOT DEFINED FORTRAN_LIBRARIES)
-    set (FORTRANLIBRARIES "NO")
-else ()
-    set (FORTRANLIBRARIES "YES")
-endif ()
-if (NOT DEFINED JAVA_LIBRARIES)
-    set (JAVALIBRARIES "NO")
-else ()
-    set (JAVALIBRARIES "YES")
-endif ()
+#CTEST_SOURCE_NAME - name of source folder; HDF5Examples
+if(DEFINED CTEST_SCRIPT_ARG)
+  # transform ctest script arguments of the form
+  # script.ctest,var1=value1,var2=value2
+  # to variables with the respective names set to the respective values
+  string(REPLACE "," ";" script_args "${CTEST_SCRIPT_ARG}")
+  foreach(current_var ${script_args})
+    if("${current_var}" MATCHES "^([^=]+)=(.+)$")
+      set("${CMAKE_MATCH_1}" "${CMAKE_MATCH_2}")
+    endif()
+  endforeach()
+endif()
+
+###################################################################
+### Following Line is one of [Release, RelWithDebInfo, Debug] #####
+set(CTEST_CONFIGURATION_TYPE "$ENV{CMAKE_CONFIG_TYPE}")
+if(NOT DEFINED CTEST_CONFIGURATION_TYPE)
+  set(CTEST_CONFIGURATION_TYPE "Release")
+endif()
+set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCTEST_CONFIGURATION_TYPE:STRING=${CTEST_CONFIGURATION_TYPE}")
+##################################################################
+
+if(NOT DEFINED INSTALLDIR)
+  set(INSTALLDIR "@CMAKE_INSTALL_PREFIX@")
+endif()
+
+if(NOT DEFINED CTEST_SOURCE_NAME)
+  set(CTEST_SOURCE_NAME "HDF5Examples")
+endif()
+
+if(NOT DEFINED HDF_LOCAL)
+  set(CDASH_LOCAL "NO")
+else()
+  set(CDASH_LOCAL "YES")
+endif()
+if(NOT DEFINED CTEST_SITE)
+  set(CTEST_SITE "local")
+endif()
+if(NOT DEFINED CTEST_BUILD_NAME)
+  set(CTEST_BUILD_NAME "examples")
+endif()
+set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DSITE:STRING=${CTEST_SITE} -DBUILDNAME:STRING=${CTEST_BUILD_NAME}")
 
 #TAR_SOURCE - name of tarfile
-#if (NOT DEFINED TAR_SOURCE)
-#  set (CTEST_USE_TAR_SOURCE "HDF5Examples-1.10.1-Source")
-#endif ()
+#if(NOT DEFINED TAR_SOURCE)
+#  set(CTEST_USE_TAR_SOURCE "HDF5Examples-1.10.5-Source")
+#endif()
 
 ###############################################################################################################
-#     Adjust the following SET Commands as needed
-###############################################################################################################
-if (WIN32)
-  if (${STATICONLYLIBRARIES})
-    set (BUILD_OPTIONS "${BUILD_OPTIONS} -DBUILD_SHARED_LIBS:BOOL=OFF")
-  endif ()
-  set (ENV{HDF5_DIR} "${INSTALLDIR}/cmake")
-  set (CTEST_BINARY_NAME ${CTEST_SOURCE_NAME}\\build)
-  set (CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_SOURCE_NAME}")
-  set (CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_BINARY_NAME}")
-else (WIN32)
-  if (${STATICONLYLIBRARIES})
-    set (BUILD_OPTIONS "${BUILD_OPTIONS} -DBUILD_SHARED_LIBS:BOOL=OFF -DCMAKE_ANSI_CFLAGS:STRING=-fPIC")
-  endif ()
-  set (ENV{HDF5_DIR} "${INSTALLDIR}/share/cmake")
-  set (ENV{LD_LIBRARY_PATH} "${INSTALLDIR}/lib")
-  set (CTEST_BINARY_NAME ${CTEST_SOURCE_NAME}/build)
-  set (CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_SOURCE_NAME}")
-  set (CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_BINARY_NAME}")
-endif(WIN32)
-if (${FORTRANLIBRARIES})
-  set (BUILD_OPTIONS "${BUILD_OPTIONS} -DHDF_BUILD_FORTRAN:BOOL=ON")
-else ()
-  set (BUILD_OPTIONS "${BUILD_OPTIONS} -DHDF_BUILD_FORTRAN:BOOL=OFF")
-endif ()
-if (${JAVALIBRARIES})
-  set (BUILD_OPTIONS "${BUILD_OPTIONS} -DHDF_BUILD_JAVA:BOOL=ON")
-else ()
-  set (BUILD_OPTIONS "${BUILD_OPTIONS} -DHDF_BUILD_JAVA:BOOL=OFF")
-endif ()
-set (BUILD_OPTIONS "${BUILD_OPTIONS} -DHDF5_PACKAGE_NAME:STRING=@HDF5_PACKAGE@@HDF_PACKAGE_EXT@")
+if(WIN32)
+  set(SITE_OS_NAME "Windows")
+  set(ENV{HDF5_DIR} "${INSTALLDIR}/cmake")
+  set(CTEST_BINARY_NAME ${CTEST_SOURCE_NAME}\\build)
+  set(CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_SOURCE_NAME}")
+  set(CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}\\${CTEST_BINARY_NAME}")
+else()
+  set(ENV{HDF5_DIR} "${INSTALLDIR}/share/cmake")
+  set(ENV{LD_LIBRARY_PATH} "${INSTALLDIR}/lib")
+  set(CTEST_BINARY_NAME ${CTEST_SOURCE_NAME}/build)
+  set(CTEST_SOURCE_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_SOURCE_NAME}")
+  set(CTEST_BINARY_DIRECTORY "${CTEST_DASHBOARD_ROOT}/${CTEST_BINARY_NAME}")
+endif()
+if(${CDASH_LOCAL})
+  set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCDASH_LOCAL:BOOL=ON")
+endif()
+set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF5_PACKAGE_NAME:STRING=@HDF5_PACKAGE@@HDF_PACKAGE_EXT@")
 
 ###############################################################################################################
 # For any comments please contact cdashhelp@hdfgroup.org
 #
 ###############################################################################################################
 
-#-----------------------------------------------------------------------------
-# MAC machines need special option
-#-----------------------------------------------------------------------------
-if (APPLE)
-  # Compiler choice
-  execute_process (COMMAND xcrun --find cc OUTPUT_VARIABLE XCODE_CC OUTPUT_STRIP_TRAILING_WHITESPACE)
-  execute_process (COMMAND xcrun --find c++ OUTPUT_VARIABLE XCODE_CXX OUTPUT_STRIP_TRAILING_WHITESPACE)
-  set (ENV{CC} "${XCODE_CC}")
-  set (ENV{CXX} "${XCODE_CXX}")
-  if (NOT NO_MAC_FORTRAN)
-    # Shared fortran is not supported, build static
-    set (BUILD_OPTIONS "${BUILD_OPTIONS} -DBUILD_SHARED_LIBS:BOOL=OFF -DCMAKE_ANSI_CFLAGS:STRING=-fPIC")
-  else ()
-    set (BUILD_OPTIONS "${BUILD_OPTIONS} -DHDF_BUILD_FORTRAN:BOOL=OFF")
-  endif ()
-  set (BUILD_OPTIONS "${BUILD_OPTIONS} -DCTEST_USE_LAUNCHERS:BOOL=ON -DCMAKE_BUILD_WITH_INSTALL_RPATH:BOOL=OFF")
-endif ()
+#############################################################################################
+####  Change default configuration of options in config/cmake/cacheinit.cmake file        ###
+####  format for file: set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DXXX:YY=ZZZZ")        ###
+#############################################################################################
+if(WIN32)
+  include(${CTEST_SCRIPT_DIRECTORY}\\HDF5_Examples_options.cmake)
+else()
+  include(${CTEST_SCRIPT_DIRECTORY}/HDF5_Examples_options.cmake)
+endif()
 
 #-----------------------------------------------------------------------------
 set (CTEST_CMAKE_COMMAND "\"${CMAKE_COMMAND}\"")
@@ -416,6 +399,57 @@ endif ()
 #-----------------------------------------------------------------------------
 ##############################################################################################################
 
+##############################################################################################################
+####  HDF5_Examples_options.cmake                                                                          ###
+####          Change default configuration of options in config/cmake/cacheinit.cmake file                 ###
+##############################################################################################################
+#############################################################################################
+####  Change default configuration of options in config/cmake/cacheinit.cmake file        ###
+####  format: set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DXXX:YY=ZZZZ")                 ###
+####  DEFAULT:                                                                            ###
+####         BUILD_SHARED_LIBS:BOOL=OFF                                                   ###
+####         HDF_BUILD_C:BOOL=ON                                                          ###
+####         HDF_BUILD_CXX:BOOL=OFF                                                       ###
+####         HDF_BUILD_FORTRAN:BOOL=OFF                                                   ###
+####         HDF_BUILD_JAVA:BOOL=OFF                                                      ###
+####         BUILD_TESTING:BOOL=OFF                                                       ###
+####         HDF_ENABLE_PARALLEL:BOOL=OFF                                                 ###
+####         HDF_ENABLE_THREADSAFE:BOOL=OFF                                               ###
+#############################################################################################
+
+### uncomment/comment and change the following lines for other configuration options
+### build with shared libraries
+#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DBUILD_SHARED_LIBS:BOOL=ON")
+
+#############################################################################################
+####      languages       ####
+### disable C builds
+#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF_BUILD_C:BOOL=OFF")
+
+### enable C++ builds
+#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF_BUILD_CXX:BOOL=ON")
+
+### enable Fortran builds
+#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF_BUILD_FORTRAN:BOOL=ON")
+
+### enable JAVA builds
+#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF_BUILD_JAVA:BOOL=ON")
+
+#############################################################################################
+### enable parallel program builds
+#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF_ENABLE_PARALLEL:BOOL=ON")
+
+#############################################################################################
+### enable threadsafe program builds
+#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DHDF_ENABLE_THREADSAFE:BOOL=ON")
+
+#############################################################################################
+### enable test program builds, requires reference files in testfiles subdirectory
+#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DBUILD_TESTING:BOOL=ON")
+#set(ADD_BUILD_OPTIONS "${ADD_BUILD_OPTIONS} -DCOMPARE_TESTING:BOOL=ON")
+
+#############################################################################################
+
 
 
 ========================================================================